Register your product and get support at
CD 1550
US-EN Additional Handset
Warning
!
Use only rechargeable batteries.
Charge the handset for 24 hours before use.
Table of contents
1
Safety information
2
5
Using your phone
Make a call
14
14
14
14
1.1
Equipment Approval
Information
5.1
5.2
5.3
2
3
Answer a call
End a call
1.2
1.3
Interference Information
Hearing Aid Compatibility
(HAC)
4
4
6
Use more of your phone 15
1.4
FCC RF Radiation Exposure
Statement
6.1
Using the intercom
15
7
Personal settings
Change the handset name
Handset Tones
17
17
17
2
Important
5
5
6
7.1
7.2
7.3
7.4
2.1
2.2
2.3
Power requirements
Conformity
Change the display language 18
Activate/deactivate auto
Electric, Magnetic and
Electromagnetic Fields ("EMF")
6
6
7
hang-up
18
2.4
2.5
Recycle your batteries
Service Centers
8
Advanced settings
Registering handset
Unregister
19
19
19
8.1
8.2
3
Your phone
8
8
3.1
3.2
3.3
What’s in the box
Overview of your phone
Display icons
9
9
Technical data
20
11
10
Frequently asked
questions
21
23
4
Getting started
12
12
12
13
11
Index
4.1
4.2
4.3
Connect the base station
Install your phone
Registering handset
Table of contents
1
plug is provided with this product. It is
designed to be connected to a compatible
modular jack that is also compliant. See
installation instructions for details.
Notes
1
Safety information
1.1
Equipment Approval
Information
•
This equipment may not be used on
coin service provided by the telephone
company.
Your telephone equipment is approved
for connection to the Public Switched
Telephone Network and is in compliance
with parts 15 and 68, FCC Rules and
Regulations and the Technical
•
Party lines are subject to state tariffs,
and therefore, you may not be able to
use your own telephone equipment if
you are on a party line. Check with
your local telephone company.
Notice must be given to the telephone
company upon permanent
disconnection of your telephone from
your line.
If your home has specially wired alarm
equipment connected to the
Requirements for Telephone Terminal
Equipment published by ACTA.
•
•
1.1.1 Notification to the Local
Telephone Company
On the bottom of this equipment is a
label indicating, among other information,
the US number and Ringer Equivalence
Number (REN) for the equipment. You
must, upon request, provide this
information to your telephone company.
The REN is useful in determining the
number of devices you may connect to
your telephone line and still have all of
these devices ring when your telephone
number is called. In most (but not all)
areas, the sum of the RENs of all devices
connected to one line should not exceed
5. To be certain of the number of devices
you may connect to your line as
telephone line, ensure the installation
of this product does not disable your
alarm equipment. If you have questions
about what will disable alarm
equipment, consult your telephone
company or a qualified installer.
US Number is located on the cabinet
bottom.
REN Number is located on the cabinet
bottom.
1.1.2 Rights of the Telephone
Company
determined by the REN, you should
contact your local telephone company.
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and
Should your equipment cause trouble on
your line which may harm the telephone
network, the telephone company shall,
where practicable, notify you that
temporary discontinuance of service may
be required. Where prior notice is not
practicable and the circumstances
requirements adopted by the ACTA. A
compliant telephone cord and modular
2
Safety information
warrant such action, the telephone
company may temporarily discontinue
service immediately. In case of such
temporary discontinuance, the telephone
company must: (1) promptly notify you of
such temporarydiscontinuance; (2) afford
you the opportunity to correct the
situation; and (3) inform you of your right
to bring a complaint to the Commission
pursuant to procedures set forth in
Subpart E of Part 68, FCC Rules and
Regulations.
The telephone company may make
changes in its communications facilities,
equipment, operations or procedures
where such action is required in the
operation of its business and not
inconsistent with FCC Rules and
Regulations. If these changes are
expected to affect the use or
interference by one or more of the
following measures: Reorient the radio/
television receiver’s antenna, relocate
the equipment with respect to the
receiver, plug the equipment and receiver
into separate circuit outlets. The user
may also wish to consult a qualified radio/
television technician for additional
suggestions. This equipment has been
fully tested and complies with all limits for
Class B computing devices pursuant to
part 15 FCC Rules and Regulations. This
device complies with RSS-210 of Industry
Canada. Operation is subject to the
following two conditions: (1) This device
may not cause interference, and (2) This
device must accept any interference,
including interference that may cause
undesired operation of the device.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
performance of your telephone
equipment, the telephone company must
give you adequate notice, in writing, to
allow you to maintain uninterrupted
service.
(1) This device may not cause harmful
interference; and (2) This device must
accept any interference received,
including interference that may cause
undesired operation.
1.2
Interference Information
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference in
a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful
This equipment generates and uses radio
frequency energy which may interfere
with residential radio and television
reception if not properly installed and
used in accordance with instructions
contained in this manual. Reasonable
protection against such interference is
ensured, although there is no guarantee
this will not occur in a given installation. If
interference is suspected and verified by
switching this equipment on and off, the
user is encouraged to try to correct the
interference to radio communications.
Safety information
3
However, there is no guarantee that
interference will not occur in a particular
installation.
user's authority to operate the
equipment.
Privacy of Communications may not be
ensured when using this product.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
1.3
Hearing Aid Compatibility
(HAC)
This telephone system meets FCC/
Industry Canada standards for Hearing
Aid Compatibility.
1.4
FCC RF Radiation Exposure
Statement
This equipment complies with FCC RF
radiation exposure limits set forth for an
uncontrolled environment. This
•
•
•
Reorient or relocate the receiving
antenna (that is, the antenna for radio
or television that is “receiving” the
interference).
Reorient or relocate and increase the
separation between the
telecommunications equipment and
receiving antenna.
Connect the telecommunications
equipment into an outlet on a circuit
different from that to which the
receiving antenna is connected.
equipment should be installed and
operated with a minimum distance of 20
centimeters between the radiator and
your body. This transmitter must not be
co-located or operated in conjunction
with any other antenna or transmitter.
For body worn operation, this phone has
been tested and meets the FCC RF
exposure guidelines when used with the
belt clip supplied with this product. Use of
other accessories may not ensure
compliance with FCC RF exposure
guidelines.
If these measures do not eliminate the
interference, please consult your dealer
or an experienced radio/television
technician for additional suggestions.
Also, the Federal Communications
Commission has prepared a helpful
booklet, “How To Identify and Resolve
Radio/TV Interference Problems.” This
booklet is available from the U.S.
GovernmentPrinting Office, Washington,
D.C. 20402. Please specify stock number
004-000-00345-4 when ordering copies.
Notice: The changes or modifications not
expressly approved by the party
responsible for compliance could void the
4
Safety information
2.1
Power requirements
2
Important
•
This product requires an electrical
supply of 120 volts AC. In case of
power failure, the communication can
be lost.
The Electrical network is classified as
hazardous. The only way to power
down the charger is to unplug the
power supply from the electrical
outlet. Ensure that the electrical outlet
is always easily accessible.
The voltage on the network is
classified as TNV-3
(Telecommunication Network
Voltages), as defined in the standard
UL 60950.
Take time to read this user manual before
you use your phone. It contains important
information and notes regarding your phone.
•
NOTICE: This product meets the
applicable Industry Canada technical
specifications.
The equipment must be installed using an
acceptable method of connection. The
customer should be aware that compliance
with the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be
made by an authorized Canadian
maintenance facility designated by the
supplier. Any repairs or alterations made
by the user to this equipment, or
equipment malfunctions, may give the
telecommunications company cause to
request the user to disconnect the
equipment.
Users should ensure for their own
protection that the electrical ground
connections of the power utility,
telephone lines and internal metallic
water pipe systems, if present, are
connected together. This precaution may
be particularly important in rural areas.
CAUTION: Users should not attempt to
make such connections themselves, but
should contact the appropriate electric
inspection authority, or electrician, as
appropriate.
•
!
Warning
To avoid damage or malfunction:
•
Do not allow the charging contacts or
the battery to come into contact with
metal objects.
Do not open it as you could be
exposed to high voltages.
Do not allow the charger to come into
contact with liquids.
Never use any other battery than the
one delivered with the product or
recommended by Philips: risk of
explosion.
•
•
•
•
•
Always use the cables provided with
the product.
Handsfree activation could suddenly
increase the volume in the earpiece to
a very high level: make sure the
handset is not too close to your ear.
This equipment is not designed to
make emergency calls when the power
fails. An alternative has to be made
available to allow emergency calls.
•
NOTES: This equipment may not be used
on coin service provided by the
telephone company.
Important
5
•
Do not expose the phone to excessive
heat caused by heating equipment or
direct sunlight.
2.3
Electric, Magnetic and
Electromagnetic Fields
("EMF")
•
•
Do not drop your phone or allow
objects to fall on your phone.
Do not use any cleaning agents
containing alcohol, ammonia, benzene,
or abrasives as these may harm the set.
Do not use the product in places
where there are explosive hazards.
Do not let small metal objects come
into contact with the product. This can
deteriorate audio quality and damage
the product.
1. Philips Royal Electronics
manufactures and sells many
consumer oriented products which
usually, as with any electronic
apparatus, have the ability to emit
and receive electro magnetic signals.
2. One of Philips' leading Business
Principles is to take all necessary
health and safety precautions for our
products, to comply with all
•
•
applicable legal requirements and to
stay well within the EMF standards
applicable at the time of producing
the products.
•
Active mobile phones in the vicinity
may cause interference.
About operating and storage temperatures:
•
•
•
Operate in a place where temperature
is always between 0 and 35º C (32 to
95º F).
Store in a place where temperature is
always between -20 and 45º C (-4 to
113º F).
3. Philips is committed to develop,
produce and market products that
cause no adverse health effects.
4. Philips confirms that if its products
are handled properly for their
intended use, they are safe to use
according to scientific evidence
available today.
Battery life may be shortened in low
temperature conditions.
5. Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments
in standardization for early
2.2
Conformity
We, Philips declare that the product is in
compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC. This
product can only be connected to the
analogue telephone networks of the
countries mentioned on the packaging.
You can find the Declaration of
integration in its products.
2.4
Recycle your batteries
Do not dispose your rechargeable
batteries. Call the toll fee number 1-800-
822-8837 to get instructions on how to
recycle your batteries.
6
Important
®
The RBRC Seal on
the nickel metal
hydride battery
indicates that Philips
Royal Electronics is
2.5
Service Centers
US service center
Philips Consumer Lifestyle
1600 Summer Street
PO Box 120015
Stamford, CT 06912
Phone: (800) 233-8413
E-mail support:
voluntarily
participating in an industry program to
collect and recycle these batteries at the
end of their useful lives, when taken out
of service within the United States and
Canada.
®
The RBRC program provides a
convenient alternative to placing used
nickel metal hydride batteries into the
trash or municipal waste, which may be
illegal in your area.
®
Philips’s participation in RBRC makes it
easy for you to drop off the spent battery
at local retailers participating in the
®
RBRC program or at authorized Philips
product service centers.
Please call 1-800-8-BATTERY for
information on Ni-MH battery recycling
and disposal bans/restrictions in your
area. Philips’s involvement in this program
is part of its commitment to protecting
our environment and conserving natural
resources.
®
RBRC is a registered trademark of
Rechargeable Battery Recycling
Corporation.
Important
7
D
Navigation keys
:
3.2
Overview of your phone
In idle mode: Scroll up to access the Call log
and scroll down to access the Phonebook.
During a call: Scroll up/down to increase or
decrease earpiece and loudspeaker volume.
In other modes: Scroll up/down a menu list
or go to the previous or next record.
E
Talk key
r
In idle mode: Answer an incoming
external or internal call.
During a call: Activate the recall function.
In phonebook/call log/redial list reviewing
mode: Dial the selected number.
F
Hang-up/Exit key
e
In idle mode: Long press to switch on/off
the handset.
During a call: Hang up a call.
In other modes: Short press to return to
idle mode.
G
Menu key
m
In idle mode: Access the main menu.
Loudspeaker key
H
v
In idle mode: Turn on the loudspeaker
and dial the number. Answer an incoming
call using handsfree mode.
During a call: Toggle the loudspeaker
on/off.
In phonebook/call log/dial list reviewing
mode: Dial the selected number using
handsfree mode.
A
B
Earpiece
OK key
<
In other modes: Select the function
displayed on the handset screen directly
above it.
I
Redial key
l
In idle mode: Access the Redial list.
In direct dialing mode: Dial the last dialed
number.
C
Back/Clear key
c
In text or number editing mode: Short
press to delete one digit/character.
In other modes: Select the function
displayed on the handset screen directly
above it.
J
Keypad lock/format key
*
In idle mode: Insert *. Long press to lock/
unlock keypad.
Your phone
9
During a call: Switch from pulse dialing to
tone dialing.
In calllog reviewing mode: Press repeatedly
to view the alternate dialing sequences.
M
Call transfer/Intercom key
i
In idle mode: Initiate an internal call.
During a call: Hold the line and page
another handset or toggle between an
external and internal call. Long press to
initiate a conference call.
N
O
P
!
K
Ringer off key
#
In idle mode: Insert #. Long press to turn
the ringer on/off.
Microphone
Battery door
Loudspeaker
During a call: Insert #. Long press to insert
a pause.
In text editing mode: Switch
between upper and lower case. Long press
to insert a pause.
Warning
Handsfree activation can suddenly
increase the volume in the earpiece to a
very high level. Make sure the handset is
not too close to your ear.
L
Mute key
M
During a call: Mute/unmute the handset
microphone.
Q
Belt clip
10
Your phone
3.3
Display icons
A
Status bar
Indicates battery is fully
B
OK key
Displays when in menu mode to confirm
your selection.
charged.
Indicates battery is fully
discharged.
Indicates that an external call
is connected or held. Icon
blinks when receiving an
incoming call.
C
key
Indicates that more options are available.
Use the navigation keys to scroll up/down.
Increase
loudspeaker volume during a call.
BACK key
or Decrease
earpiece or
D
Indicates new voice messages
received. Icon blinks when
there are unread messages.
Displays when the call log is
accessed. Icon blinks when
there are new missed calls.
Displays when the
Displays when in menu mode. Select
BACK to return to the previous menu
level. Select BACK to delete the last digit/
character entered.
phonebook is accessed.
Displays when the alarm
clock is activated.
Displays when the
loudspeaker is activated.
Displays when ringer off is
activated.
Indicates that the handset is
registered and within range
of the base station. Icon
blinks when the handset is
out of range or is searching
for a base.
Your phone
11
Place the batteries in the correct
polarity as indicated and replace the
cover.
2
4
Getting started
4.1
Connect the charger
Place the charger in a central
location near the electricity socket.
1
4.2.2 Charge battery
!
Warning
The handset must be charged for at least
24 hours before using it for the first time.
When the battery level becomes low, the
low battery sensor alerts you by sounding
an audible tone and blinking the battery
icon.
If the battery level becomes exceedingly
low, the phone automatically switches off
shortly after the alert and any function in
progress will not be saved.
Connect the power cable to their
corresponding connectors at the
back of the charger.
2
Place the handset on the charging
cradle of the charger. A beep is
emitted if the handset is placed
correctly.
1
4.2
Install your phone
Before using the handset, the batteries
have to be installed and fully charged.
The battery icon
blinks during charge.
The battery icon
steady when the handset is fully
charged.
on the display
2
3
becomes
4.2.1 Install battery
!
Warning
Always use AAA rechargeable batteries
supplied with your unit. There could be
risk of battery leakage if you use alkaline
batteries or other battery types.
Note
Optimal battery life is reached after 3
cycles of complete charging (over 15
hours) and discharging, allowing
approximately 12 hours of talk-time and
150 hours of stand-by time.
Slide out the battery cover.
1
The indoor and outdoor range of the
phone is up to 50 meters and 300 meters
respectively. When the handset moves
12
Getting started
beyond the operation range, the antenna
icon will blink.
Tip
When reaching the range limit and the
conversation becomes crackly, move
closer to the base.
4.3
Registering handset
The procedures described below are the
procedures that you will find in your
handset. The procedures may vary
according to the handset you want to
register. In this case, please refer to the
manufacturer of the additional handset.
Additional handsets must be registered to
the base unit before you can use them. Up
to 4 handsets can be registered to one
base station.
Insert battery to power up the
handset. The LCD displays "PRESS
OK KEY TO REGISTER".
Press <OK on handset, the LCD
displays "HOLD LOCATOR KEY
DURING 5s".
Within 5 minutes, press the locator
key on base station to start
registration.
1
2
3
If registration succeeds, the handset
returnsto idle mode.
If registration fails, the LCD will
display "PRESS OK KEY TO
REGISTER". Repeat the process
again.
4
5
Getting started
13
5
Using your phone
5.1
Make a call
5.1.1 Predialing
Dial the number (maximum 24 digits).
1
2
Press r key.
•
The call is initiated.
5.1.2 Direct dialing
Press r or v key to take the
1
line.
Dial the number.
2
•
The call is initiated.
5.2
Answer a call
Danger
When the handset rings during an incoming
call, please do not hold the handset too
close to your ear as the volume of the
ringing tone may damage your hearing.
When the phone rings, press r key.
•
The call is established.
Note
Incoming call has priority over other events.
Whenever there is an incoming call, other
status in progress such as phone setting,
menu navigation, etc will be aborted.
5.3
To end a conversation, press e key.
The call ends.
End a call
•
14
Using your phone
displayed. Press the specific handset
number you wish to call to start
intercom.
Press r key on the called handset
to answer the internal call, where
both internal callers can talk.
6
Use more of your
phone
3
4
6.1
!
Using the intercom
Warning
•
Intercom is established.
Press ekey on the first handset to
transfer the external call to the
called handset.
Intercom and call transfer is only possible
with handsets registered to the same base
station.
•
The external call is transferred.
This feature is only available when there are
at least 2 registered handsets. It allows you
to make free internal calls, transfer external
calls from one handset to another and use
the conference option.
Note
If there is no answer from the called
handset, press i key to resume the
external call.
6.1.3 Answer an external call
during intercom
6.1.1 Intercom another handset
Note
During intercom, a new call tone is
emitted when there is an incoming
external call.
1
If the handset does not belong to CD155/
150 range, this function may not be available.
Press i key in idle mode.
1
Press rto answer the external call
2
•
Intercom is established immediately if
there are only 2 registered handsets.
and end the intercom.
•
Connection with the external call is
established.
If there are more than 2 registered
handsets, the handset numbers which
are available for intercom will be
displayed. Press the specific handset
number you wish to call to start
intercom.
2
Note
To put the internal call on hold and answer
the incoming external call, press ikey.
6.1.4 Switch between an internal
and external call
During the call, long press * key to
switch between an internal or external
call.
6.1.2 Transfer an external call to
another handset
During the call, press and hold i
1
key to put the external call on hold
(the caller can no longer hear you).
•
Intercom is established immediately if
there are only 2 registered handsets.
6.1.5 Establish a three-party
conference call
If there are more than 2 registered
handsets, the handset numbers which
are available for intercom will be
2
The conference call feature allows one
external call to be shared with two
handsets (in intercom). The three parties
Use more of your phone
15
can share the conversation and no
network subscription is required.
During the call, long press i key
1
to put the external call on hold (the
caller can no longer hear you).
If there are more than 2 registered
handsets, the handset numbers which
are available for intercom will be
displayed. Press the specific handset
number you wish to call.
2
Press ror vkey on the called
handset to answer the internal call,
where both internal callers can talk.
3
4
•
Intercom is established.
Press and hold i key for 2
seconds on the first handset to start
the three-party conference.
•
CONFERENCE will be displayed on
the screen once the conference call
is established.
16
Use more of your phone
Scroll : to your desired volume
2
level and press <OK to confirm.
7
Personal settings
•
A validation tone is emitted and the
screen returns to previous menu.
7.1
Change the handset name
Note
You can name the handset and display the
handset name in idle mode. The default
handset name of your handset is PHILIPS
When RINGER OFF is activated, the icon
will be displayed on the screen.
.
Press m key in idle mode, scroll
1
7.2.2 Set the tones melody
There are 10 ring melodies available on
your handset.
: to PERSONAL SET and press
<OK, scroll : to HANDSET
NAME and press <OK
.
Press m key in idle mode, scroll
1
The last stored name is displayed.
Press cBACK key to delete the
characters one by one.
2
3
: to PERSONAL SET and press
<OK, press <OK to enter
HANDSET TONES, scroll : to
Enter the new name (maximum 10
characters) and press <OK to
confirm.
RING TONES and press <OK
.
Scroll : to your desired melody
2
3
to play the melody.
•
A validation tone is emitted and the
screen returns to previous menu.
Press <OK to set the ring melody.
•
A validation tone is emitted and the
screen returns to previous menu.
7.2
Handset Tones
7.2.3 Activate/deactivate key
tone
7.2.1 Set the ring volume
Danger
A single tone is emitted when a key is
pressed. You can enable or disable the
key tone. By default, the key tone is ON
When the handset rings during an
incoming call, please do not hold the
handset too close to your ear as the
volume of the ringing tone may damage
your hearing.
.
Press m key in idle mode, scroll
1
: to PERSONAL SET and press
<OK, press <OK to enter
HANDSET TONES, scroll : to
There are 5 ringer volume options (OFF
,
KEY BEEP
OK.
Scroll :atnod press <
ON or OFF and press
LEVEL 1
,
LEVEL 2, LEVEL 3 and LEVEL 4).
2
The default level is LEVEL 2
.
<OK to confirm.
Press m key in idle mode, scroll
: to PERSONAL SET and press
<OK, press <OK to enter
1
•
A validation tone is emitted and the
screen returns to previous menu.
HANDSET TONES and press <OK
again to enter RING VOLUME
.
Personal settings
17
7.3
Change the display language
Your handset can support different
display languages.
Press m key in idle mode, scroll
1
: to PERSONAL SET and press
<OK, scroll : to LANGUAGE
and press <OK.
Scroll :to your desired language
2
and press <OK to confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
Tip
Once the display language is set, the
option menus on the handset will switch
to display in the selected language
immediately.
7.4
Activate/deactivate auto
hang-up
This function enables you to end a call
automatically by simply placing the
handset on the base station. By default,
the Auto Hang up feature is ON
.
Press m key in idle mode, scroll
: to PERSONAL SET and press
<OK, scroll : to AUTO HANG-
1
UP and press <OK
.
Scroll : to ON or OFF and press
2
<OK to confirm.
•
A validation tone is emitted and the
screen returns to previous menu.
18
Personal settings
8
Advanced settings
8.1
Registering handset
See chapter 4.3
8.2
Unregister
Press m key in idle mode, scroll
: to ADVANCED SET and press
<OK, scroll : to UNREGISTER
and press <OK.
1
Scroll :to select the handset
number to unregister and press <OK.
2
•
A validation tone is emitted to indicate
successful unregistration and the
screen returns to previous menu.
Note
If no action is taken on the handset within
15 seconds, the unregistration procedure
will be aborted and the handset returns
to idle mode.
To unregister a handset that does not
belong to the CD155/150 range, you can
only use the CD155150 handset to
unregister it.
Advanced settings
19
9
Technical data
Display
•
•
Progressive LCD backlight
The backlight remains on for 15
seconds after each activation such as
an incoming call, key presses, lifting the
handset off the base station, etc.
The colour of the LCD backlight is
Amber.
•
Battery
•
2 x HR AAA NiMh 550 mAh batteries
Radio specifications
•
•
Frequency band: 1920 - 1930 MHz
Maximum output power: 120 mW
Power consumption
•
Power consumption at idle mode:
around 800 mW
Temperature range
•
Operation: Between 0 and 35º C (32
to 95º F).
•
Storage: Between -20 and 45º C (-4 to
113º F).
Relative humidity
•
•
Operation: Up to 95% at 40°C
Storage: Up to 95% at 40°C
20
Technical data
10 Frequently asked
questions
In this chapter, you will find the most
frequently asked questions and answers
about your phone.
Connection
Sound
The handset does not switch on!
Handset does not ring!
Check that the RING VOLUME is not set
to RINGER OFF, and make sure icon is
not displayed on the screen (see “Set the
ring volume” on chapter 7.2.1).
•
Charge the batteries: Put the handset on
the charger to charge. After a few
moments, the phone will switch on.
The handset does not charge!
•
Check charger connections.
Caller does not hear me!
Microphone may be muted: During a call,
press M.
icon is not blinking during
charge!
•
•
•
Battery is full: There is no need to
charge the battery.
There’s no dialing tone!
•
•
No power: Check the connections.
Batteries are empty: Charge the
batteries.
Bad battery contact: Adjust the
handset slightly.
Dirty contact: Clean the batteries
contact with a cloth moistened with
alcohol.
•
•
Move closer to the base station.
Wrong line cable used: Use the line
cable provided.
Communication is lost during a call!
•
•
•
Line adaptor is required: Connect the
line adaptor to the line cord.
Charge the battery
Move closer to the base station.
The phone is "Out of range"!
Move closer to the base station.
•
Set-up
SEARCHING... is displayed on handset
and
icon is blinking!
Frequent noise interference on my
radio or television!
•
•
•
Move closer to the base station.
Make sure that your base station is on.
Reset your unit and restart handset
registration.
•
Move the base station as far away as
possible from the electrical appliances.
Frequently asked questions
21
Product behaviour
Keypad does not work!
•
Unlock your keypad: Long press *in
idle mode.
The handset warms up when
making a long call!
•
This is a normal behavior. The handset
consumes energy while calling.
The handset cannot be registered to
the base station!
•
Maximum number of handsets (4) has
been reached. To register a new
handset, unregister an existing
handset.
•
•
Remove and replace the handset
batteries.
Try again by disconnecting and
connecting the base station power
supply and follow the procedure to
register a handset (see “Registering
handset” on chapter 4.3).
My handset keeps going into idle
mode!
•
If there are no key presses for 15
seconds, the handset will automatically
return to idle mode. It will also return to
idle mode automatically when you place
the handset back on the base station.
22
Frequently asked questions
11 Index
P
A
Predialing 14
Accessories 8
Answer a call 14
Answer an external call 15
Auto hang-up 18
R
Recycle your batteries 6
Registration 13
C
Ring volume 17
Charge battery 12
T
Conference call 15
Connect base station 12
Tones Melody 17
Transfer an external call 15
D
U
Direct dialing 14
Display icons 11
Unregister 19
E
End a call 14
H
Handset name 17
Handset tones 17
I
Install battery 12
Intercom 15
K
Key tone 17
L
Language 18
LCD Backlight 20
LED indicator 11
M
Make a call 14
O
Overview of your phone 9
Index
23
© 2008 Koninklijke Philips Electronics N.V.
All rights reserved
Reproduction in whole or in part is prohibited without the
written consent of the copyright owner
P r i n t e d i n C h i n a
Document number: 3111 285 50141 (US-EN)
|