Operating Instructions
LCD Display
DISPLAY
TH-32LHD7UX
Model No.
D7
LH
-32
TH
TH-3
2LHD
7
The illustration shown is an image.
Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this
manual for future reference.
English
TQBC0974
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments / accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the cart / apparatus combination
to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.
3
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment
from your new LCD Display.
To obtain maximum benefit from your set, please read these Instructions before making any adjustments,
and retain them for future reference.
Retain your purchase receipt as well, and record the model number and serial number of your set in the
space provided on the rear cover of these instructions.
Table of Contents
Important Safety Instructions.................................. 3
FCC STATEMENT...................................................... 5
Safety Precautions................................................... 6
MAINTENANCE......................................................... 7
Accessories .............................................................. 8
Accessories Supplied.............................................. 8
Remote Control Batteries........................................ 8
Connections.............................................................. 9
PC Input Terminals connection.............................. 10
SERIAL Terminals connection............................... 11
Power ON / OFF ..................................................... 12
Initial selections ..................................................... 13
Selecting the input signal ...................................... 13
Selecting the On-Screen Menu Language ............ 13
Basic Controls ........................................................ 14
On-Screen Menu Displays..................................... 16
ASPECT Controls ................................................... 18
Adjusting PICTURE POSITION / SIZE................... 19
MULTI PIP................................................................ 20
PICTURE Adjustments........................................... 21
ADVANCED SETTINGS........................................ 22
SOUND Adjustment................................................ 23
MUTE .................................................................... 23
Digital Zoom............................................................ 24
PRESENT TIME SETUP / SET UP TIMER.............. 25
PRESENT TIME SETUP....................................... 25
SET UP TIMER ..................................................... 26
Reduces power consumption ............................... 27
Customizing the Input labels ................................. 27
SET UP for Input Signals ....................................... 28
COMPONENT / RGB IN SELECT......................... 28
3D Y/C FILTER...................................................... 28
COLOR SYSTEM / Panasonic AUTO ................... 29
3:2 PULLDOWN / VIDEO NR............................... 29
SYNC .................................................................... 30
H-FREQ. (kHz) / V-FREQ. (Hz)............................. 30
Shipping condition................................................. 31
Troubleshooting ..................................................... 32
Input signal can be diplayed ................................. 33
Specifications......................................................... 34
4
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
FCC Caution:
Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications to this monitor not expressly
approved by Panasonic Corporation of North America could cause harmful interference and would void the
user's authority to operate this device.
To assure continued compliance and possible undesirable interference, the provided ferrite cores must be used
when connecting this LCD display to video equipment; and maintain at least 40 cm spacing to other peripheral
devices. Refer to instructions on page 10 and 11. Any changes or modifications not expressly approved by
Panasonic Corporation of North America could cause harmful interference and would void the user's authority to
operate this device.
FCC Declaration of Conformity
Model No. TH-32LHD7UX
Responsible Party:
Contact Source:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Panasonic Consumer Electronics Company
1-888-843-9788
email: [email protected]
CANADIAN NOTICE:
This Class B digital apparatus complies with Canadian ICES-003.
Trademark Credits
• VGA is a trademark of International Business Machines Corporation.
• Macintosh is a registered trademark of Apple Computer, USA.
• S-VGA is a registered trademark of the Video Electronics Standard Association.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully
respected.
5
Safety Precautions
CAUTION
This LCD Display is for use only with the following optional accessories. Use with any other type of optional
accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.)
• Speakers ................................................................. TY-SP32L7W-K (Black), TY-SP32L7W-S (Silver)
• Pedestal .................................................................. TY-ST32L7-K (Black), TY-ST32L7-S (Silver)
• Wall-hanging bracket (angled) ................................ TY-WK32LR1S
• RCA Component Video Terminal Board.................. TY-42TM6Z
• RCA Composite Video Terminal Board ................... TY-42TM6V
• U/V Tuner Board with MATE I/F .............................. TY-42TM6MA (U.S.A. only)
Always be sure to ask a qualified technician to carry out set-up.
Do not leave unused small parts or similar within the reach of young children.
There is a risk that they may accidentally swallow them. Be equally careful about packaging materials and plastic
sheets, etc.
• If you think a child may have swallowed such items, be sure to consult with a physician immediately.
When using the LCD Display
Be sure to disconnect all cables before moving the LCD Display.
• Moving the Display with its cables attached might damage the cables which, in turn, can cause fire or electric shock.
Disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning.
• Electric shocks can result if this is not done.
Clean the power cable regularly to prevent it from becoming dusty.
• Built-up dust on the power cord plug can increase humidity which might damage the insulation and cause fire.
Unplug the cord from the wall outlet and clean it with a dry cloth.
This LCD Display radiates infrared rays, therefore it may affect other infrared communication equipment.
Install your infrared sensor in a place away from direct or reflected light from your LCD Display.
6
Safety Precautions
WARNING
Setup
Do not place the LCD Display on sloped or unstable surfaces.
• The LCD Display may fall off or tip over.
Do not place any objects on top of the LCD Display.
• If water spills onto the LCD Display or foreign objects get inside it, a short-circuit may occur which could result in fire
or electric shock. If any foreign objects get inside the LCD Display, please consult an Authorized Service Center.
Do not cover the ventilation holes.
• Doing so may cause the LCD Display to overheat, which can cause fire or damage to the LCD Display.
15 16
31 32
If using the pedestal (optional accessory), leave a space of 3 / ” (10 cm) or more at the top, left and right, 1 / ”
3 4
(5 cm) or more at the bottom, and 2 / ” (7 cm) or more at the rear. If using some other setting-up method, leave a
space of 3 / ” (10 cm) or more at the top, bottom, left and right, and 2 / ” (6 cm) or more at the rear.
15 16
3 8
AC Power Supply Cord
The LCD Display is designed to operate on 120 V AC, 50/60 Hz.
Securely insert the power cord plug as far as it will go.
• If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall
socket plate is loose, they should not be used.
Do not handle the power cord plug with wet hands.
• Doing so may cause electric shocks.
Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug,
not the cable.
• Do not make any modifications, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pull the
power cable. Doing so may cause damage to the power cable which can cause fire or electric shock. If damage to
the cable is suspected, have it repaired at an Authorized Service Center.
If the LCD Display will not be used for a long period of time, unplug the power cord from the wall outlet.
If problems occur during use
If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the LCD
Display, unplug the power cord immediately.
• Continuous use of the Display under these conditions might cause fire or permanent damage to the unit. Have
the Display evaluated at an Authorized Service Center. Services to the Display by any unauthorized personnel are
strongly discouraged due to its high voltage dangerous nature.
If water or foreign objects get inside the LCD Display, if the LCD Display is dropped, or if the cabinet becomes
damaged, disconnect the power cord plug immediately.
• A short may occur, which could cause fire. Contact an Authorized Service Center for any repairs that need to be made.
MAINTENANCE
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning
cloth or a soft, lint-free cloth.
• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water to
which a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same type
until the surface is dry.
• Do not scratch or hit the surface of the panel with fingernails or other hard objects, otherwise the surface may
become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner,
otherwise the quality of the surface may be adversely affected.
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been
added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.
• Do not allow any detergent to come into direct contact with the surface of the LCD Display. If water droplets get
inside the unit, operating problems may result.
• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the
cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods
in contact with articles made from rubber or PVC.
7
Accessories
Accessories Supplied
Check that you have the Accessories and items shown
Operating
Instruction book
Remote Control
Transmitter
EUR646535
Batteries for the
Remote Control
Transmitter
Warranty
(AA Battery × 2)
INPUT
SURROUND
VOL
N
R
PICTURE
SOUND
SET UP
ZOOM
MULTI
PIP
SWAP SELECT MOVE
PICTURE
POS. /SIZE
ASPECT
PC
OFF TIMER
DISPLAY
Ferrite core
Ferrite core
Fixing bands × 2
AC cord
(Small size) × 2
(Large size) × 2
Remote Control Batteries
Requires two AA batteries.
2. Install the batteries as shown in the
battery compartment.
3. Replace the cover and slide in
reverse until the lock snaps.
1. Turn the transmitter face down.
Press and slide off the battery
cover.
(Polarity + or – must match the
markings in the compartment.)
Two “AA” size
Helpful Hint:
For frequent remote control users, replace old batteries with
Alkaline batteries for longer life.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Disposal of batteries should be in an environment-friendly manner.
Observe the following precautions:
1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when the remote control acts sporadically or stops operating the LCD Display.
8
Connections
When connecting the speakers, be sure to use only the optional accessory speakers.
Refer to the speaker’s Installation Manual for details on speaker installation.
Speakers (Optional accessories)
1
2
1
L
I
AUDIO
SLOT
1
SLOT
2
PC IN
SERIAL
SPEAKERS
Terminals (L)
SPEAKERS
Terminals (R)
2
AC cord connection (see page 12)
– AC cord fixing
1. Open the clamper. 2. Insert the AC cord 3. Slide up the clamper and fix 4. Insert the point of the
and close the clamper
securely.
the AC cord plug securely.
When loosen
fixed clamper into the
small hole on the lower
r i g h t o f
the clamper:
the back
cover as
necessary.
AC cord
Clamper
Note: The power plug in the illustration may not be the type fitted to your set.
– Cable fixing bands
Secure any excess cables with bands as required.
Pass the attached cable To secure cables connected to Terminals, wrap the cable fixing band around them
then pass the pointed end through the locking block, as shown in the figure.
While ensuring there is sufficient slack in cables to minimize stress (especially
in the power cord), firmly bind all cables with the supplied fixing band.
fixing band through the
clip as shown in the
figure.
To tighten:
To loosen:
Push the catch
Pull
Pull
2
1
Optional Terminal Board insert Slots (covered)
AUDIO
PC IN
SERIAL
SLOT1
SLOT2
From EXTERNAL
monitor terminal on
Computer (see page 10)
From SERIAL Terminal
on Computer
(see page 11)
9
Connections
PC Input Terminals connection
COMPUTER
AUDIO
PC IN
TH-32LHD7
Less than
3" 15
(10 cm)
Conversion adapter
(if necessary)
Ferrite core (large size)
/
16
(supplied)
D-sub 15p
RGB
PC cable
Less than
Less than
Ferrite core
(Small size)
(supplied)
3" 15
/
3" 15
/
16
16
(10 cm)
(10 cm)
Audio
Stereo plug
Connect a cable which matches
the audio output terminal on the computer.
Installing the ferrite core (Small size)
1
2
3
Open
Press the cable
through and close
Pull back the tabs
(in two places)
Installing the ferrite core (Large size)
1
2
3
Open
Pull back the tabs
(in two places)
Press the cable
through and close
Notes:
• Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical
scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200
lines.)
• The display resolution is a maximum of 1,024 × 768 dots when the aspect mode is set to “NORMAL”, and 1,366 × 768
dots when the aspect mode is set to “FULL”. If the display resolution exceeds these maximums, it may not be possible
to show fine detail with sufficient clarity.
• The PC input terminals are DDC1/2B-compatible. If the computer being connected is not DDC1/2B-compatible, you
will need to make setting changes to the computer at the time of connection.
• Some PC models cannot be connected to the set.
• There is no need to use an adapter for computers with DOS/V compatible D-sub 15P terminal.
• The computer shown in the illustration is for example purposes only.
• Additional equipment and cables shown are not supplied with this set.
• Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified
frequency range.
Signal Names for D-sub 15P Connector
Pin No.
Signal Name
Pin No.
Signal Name
GND (Ground)
GND (Ground)
GND (Ground)
NC (not connected)
GND (Ground)
Pin No.
Signal Name
GND (Ground)
SDA
1
2
6
11
R
R
11 12 13 14 15
10
R (P /C )
G (Y)
6
7
8
9
7
8
9
12
13
14
15
1
2
3
4
5
3
4
5
B
B
B (P /C )
HD/SYNC
VD
GND (Ground)
GND (Ground)
Pin Layout for PC Input
Terminal
10
SCL
10
Connections
SERIAL Terminals connection
The SERIAL terminal is used when the LCD Display is controlled by a computer.
COMPUTER
6
7
8
9
1
2
3
4
5
Ferrite core
(large size)
(supplied)
RS-232C
Straight cable
SERIAL
Pin layout for RS-232C
Installing the ferrite core
(Large size)
Less than
/
16
(10 cm)
D-sub 9p
3" 15
Open
Notes:
• Use the RS-232C cable to connect the computer to the LCD Display.
• The computer shown is for example purposes only.
• Additional equipment and cables shown are not supplied with this set.
The SERIAL terminal conforms to the RS-232C interface specification, so that the LCD Display can be controlled by a
computer which is connected to this terminal.
The computer will require software which allows the sending and receiving of control data which satisfies the conditions
given below. Use a computer application such as programming language software. Refer to the documentation for the
computer application for details.
Communication parameters
Signal level
RS-232C Conversion cable
RS-232C compliant
D-sub 9-pin female
Details
R X D
Synchronization method
Baud rate
Asynchronous
9600 bps
None
2
3
5
T X D
GND
Parity
Character length
Stop bit
Flow control
8 bits
1 bit
-
6
9
4
1
•
7
8
Non use
Shorted
NC
•
Basic format for control data
Command
Command Parameter
The transmission of control data from the computer
starts with a STX signal, followed by the command,
the parameters, and lastly an ETX signal in that order.
If there are no parameters, then the parameter signal
does not need to be sent.
Control details
Power ON
Power OFF
Volume 00 - 63
Audio MUTE OFF
Audio MUTE ON
Input select (toggle)
Slot1 input
PON
POF
AVL
None
None
**
0
1
None
SL1
AMT
IMS
STX
C1 C2 C3
:
P1 P2 P3 P4 P5
ETX
Colon Parameter(s) End
SL2
PC1
Slot2 input
(1 - 5 bytes) (03h)
Start
(02h)
3-character
command (3 bytes)
PC input
DAM
None
NORM
ZOOM
FULL
JUST
SELF
Screen mode select (toggle)
NORMAL (4 : 3)
ZOOM
Notes:
FULL
JUST
• If multiple commands are transmitted, be sure to
wait for the response for the first command to come
from this unit before sending the next command.
• If an incorrect command is sent by mistake, this
unit will send an “ER401” command back to the
computer.
Panasonic AUTO
With the power off, this display responds to PON command
only.
11
Power ON / OFF
Connecting the AC cord plug to the LCD Display.
Fix the AC cord plug securely to the LCD Display
with the clamper. (see page 9)
L
I
I
I
D
U
O
//
/
AUDIO
V
SLOT
1
SLOT
2
P
C
I
N
SERIAL
Connecting the plug to the Wall Outlet
Press the Power switch on the LCD Display to turn the set on:
Power-On.
TH-32LHD7
INPUT
MENU
/
V
O
L
+
/
ENTER/
Power Indicator: Green
Power Indicator
Example: The screen below is displayed for a while after the
LCD Display is turned on. (setting condition is an
example.)
TH-32LHD7
Remote Control
Sensor
When the POWER is turned on for the first
time, the LANGUAGE selection screen is
displayed.
From the second time on, the screen
shown below is displayed for a while
(setting condition is an example).
OSD LANGUAGE
English (UK)
Deutsch
Français
Italiano
From the second time on, language
selection can be done from the setup
menu. (see page 13)
PC
Español
FULL
ENGLISH (US)
Select the desired language using the or
button and press the ACTION ( ) button.
SELECT
SET
Press the
button on the remote control to turn the LCD Display off.
INPUT
SURROUND
VOL
Power Indicator: Red (standby)
Press the
button on the remote control to turn the LCD Display on.
N
R
Power Indicator: Green
Turn the power to the LCD Display off by pressing the
when the LCD Display is on or in standby mode.
switch on the unit,
PICTURE
SOUND
SET UP
MULTI
PIP
ZOOM
SWAP
SELECT MOVE
ASPECT
Note:
PICTURE
POS. /SIZE
During operation of the power management function, the power indicator turns
orange in the power off state.
12
Initial selections
Selecting the input signal
Select the input signals to be connected by installing the optional Terminal Boards.
INPUT
INPUT
SURROUND
Press to select the input signal to be played back from
the equipment which has been connected to the LCD
Display.
VOL
N
R
Input signals will change as follows:
INPUT1
INPUT2
PC IN
PICTURE
SOUND
SET UP
MULTI
PIP
ZOOM
SWAP
SELECT MOVE
Notes:
TH-32LHD7
INPUT
MENU
/
VOL
+
/
ENTER/
• Selecting is also possible by pressing the INPUT button on the unit.
• Input terminal will not be selected if the terminal board is not installed into the SLOT.
• Select to match the signals from the source connected to the component/RGB input
terminals. (see page 28)
• In 2 screen display, the same input mode cannot be selected for the main picture
and sub picture.
INPUT
MENU
/
VOL +/
ENTER/
Selecting the On-Screen Menu Language
SET UP
INPUT
Press to display the SET UP menu.
SURROUND
VOL
Press to select OSD LANGUAGE.
N
R
Press to select your preferred language.
PICTURE
SOUND
SET UP
MULTI
PIP
ZOOM
SWAP
SELECT MOVE
Selectable languages
1/2
SET UP
SIGNAL
English(UK)
Deutsch
Français
Italiano
Español
ENGLISH(US)
.......(Chinese)
.......(Japanese)
COMPONENT/RGB-IN SELECT
RGB
PC
OFF
OFF
OFF
OFF
INPUT LABEL
POWER SAVE
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
OSD LANGUAGE
(
)
ENGLISH US
13
Basic Controls
C.A.T.S. sensor
C.A.T.S. (Contrast Automatic Tracking System)
C.A.T.S. automatically senses the ambient light conditions and adjusts the brightness and gradation accordingly, to
optimise contrast. (Effective when PICTURE MENU is set to AUTO.)
Remote control sensor
Volume Adjustment
Volume Up “+” Down “–”
When the menu screen is
displayed:
“+”: press to move the cursor up
“–”: press to move the cursor
down
TH-32LHD7
(see page 16)
Enter / Aspect button
(see page 16, 18)
INPUT
MENU
/
VOL
+/
ENTER/
Main Power On / Off Switch
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu
screen will switch. (see page 16)
Power Indicator
The Power Indicator will light.
Normal Viewing
PICTURE
SETUP
• Power-OFF ....Indicator not illuminated (The unit
will still consume some power
as long as the power cord is still
inserted into the wall outlet.)
SOUND
PICTURE POS. /SIZE
INPUT button
• Standby .....Red
(INPUT1, INPUT2 and PC IN selection)
• Power-ON......Green
(see page 13)
• DPMS.............Orange (With PC input signal.)
Status button
Press the “Status” button to display the current
system status.
N button (see page 19, 21, 22, 23)
PICTURE button (see page 21)
PC
1
2
NORMAL
MULTI Window buttons (see page 20)
OFF TIMER 90
3
1
2
3
Input label
Aspect mode (see page 18)
Off timer
The off timer indicator is displayed only when the
off timer has been set.
PC button
Press the “PC” input mode selection button to select
the PC input mode.
This button is used to switch directly to PC input
mode.
14
Basic Controls
Standby (ON / OFF) button
The LCD Display must first be plugged into the wall outlet and turned on at the power switch (see page 12).
Press this button to turn the LCD Display On, from Stanby mode. Press it again to turn the LCD Display Off
to Stanby mode.
SURROUND button
The surround setting switches on and off each time the SURROUND
button is pressed.
ON
OFF
The benefits of surround sound are enormous. You can be completely
enveloped in sound; just as if you were at a concert hall or cinema.
Note:
The surround settings are memorized separately for each AUDIO MENU
(STANDARD, AUTO).
SURROUND ON
INPUT button
(INPUT1, INPUT2 and PC IN selection)
Press to select INPUT1, INPUT2 and PC IN input SLOTS sequentially.
(see page 13)
INPUT
Sound mute On / Off (see page 23)
SURROUND
Volume Adjustment
Press the Volume Up “+” or Down “–” button to increase or decrease
the sound volume level.
VOL
R button (see page 17)
Press the R button to return to previous menu screen.
N
R
ACTION button
Press to make selections.
POSITION buttons
Digital Zoom (see page 24)
SOUND button (see page 23)
PICTURE
SOUND
SET UP
ZOOM
ZOOM
Press to access
Digital Zoom.
MOVE
SET UP button
(see page 16, 17)
MULTI
PIP
SWAP
SELECT MOVE
ASPECT
This displays an enlargement
of the designated part of the
displayed image.
PICTURE POS. / SIZE button
(see page 19)
PICTURE
POS. /SIZE
ASPECT button
Press to adjust the aspect.
(see page 18)
PC
OFF TIMER
OFF TIMER button
The LCD Display can be preset to switch to stand-by after a fixed
period. The setting changes to 30 minutes, 60 minutes, 90 minutes
and 0 minutes (off timer cancelled) each time the button is pressed.
DISPLAY
30
60
0
90
When three minutes remain, “OFF TIMER 3” will flash.
The off timer is cancelled if a power interruption occurs.
15
On-Screen Menu Displays
The MENU button on the unit can also
To PICTURE adjust menu
be pressed.
(see page 21)
Press to select .
1
PICTURE
1/2
INPUT
MENU
/
VOL +/
ENTER/
NORMAL
NORMALIZE
STANDARD
PICTURE MENU
BACK LIGHT
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
20
25
0
0
0
[ from the unit ]
Each time the MENU button is pressed,
the menu screen will switch.
Normal Viewing
SOUND
PICTURE
SETUP
3
INPUT
MENU
/
VOL +/
ENTER/
PICTURE POS. /SIZE
PICTURE
2/2
NORMAL
OFF
ON
2
1
1
2
COLOR TEMP
COLOR MANAGEMENT
ADVANCED SETTINGS
Press to select.
Press to access each adjust
screen.
INPUT
SURROUND
Press to select
“ON”.
VOL
N
R
Press to enter
ADVANCED
SETTINGS.
SET UP
1/2
SIGNAL
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
POWER SAVE
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
OSD LANGUAGE
To ADVANCED SETTINGS
(see page 21, 22)
PC
OFF
OFF
OFF
OFF
ADVANCED SETTINGS
PICTURE
SOUND
SET UP
ZOOM
NORMAL
NORMALIZE
0
0
0
0
0
0
BLACK EXTENSION
INPUT LEVEL
W/B HIGH R
W/B HIGH B
W/B LOW R
W/B LOW B
GAMMA
(
)
ENGLISH US
MULTI
PIP
SWAP
SELECT MOVE
ASPECT
PICTURE
POS. /SIZE
2.2
OFF
AGC
PC
OFF TIMER
To SOUND adjust menu
(see page 23)
SET UP
2/2
SOUND
NORMAL
NORMALIZE
AUDIO MENU
BASS
SET UP TIMER
PRESENT TIME SETUP
DISPLAY
STANDARD
0
0
TREBLE
BALANCE
SURROUND
0
OFF
To PICTURE POS./SIZE adjust menu (see page 19)
During “VIDEO (S VIDEO)”,
During “RGB/PC” input signal.
“COMPONENT” and “DVI” input signal.
PICTURE POS. /SIZE
PICTURE POS. /SIZE
NORMAL
NORMAL
NORMALIZE
H-POS
NORMALIZE
H-POS
H-SIZE
V-POS
H-SIZE
V-POS
V-SIZE
V-SIZE
CLOCK PHASE
16
On-Screen Menu Displays
[ from the unit ]
2
R
Press to access
e a c h a d j u s t
screen.
INPUT
MENU
/
VOL +/
ENTER/
Press the R button to return
to previous menu.
Press to return to next menu
screen.
To SIGNAL screen for VIDEO
(S VIDEO) (see page 28, 29)
To SIGNAL screen for
COMPONENT (see page 29)
[
]
[
]
COMPONENT
SIGNAL
VIDEO
SIGNAL
3D Y/C FILTER (NTSC)
COLOR SYSTEM
3 : 2 PULLDOWN
Panasonic AUTO (4 : 3)
VIDEO NR
ON
AUTO
OFF
NORMAL
OFF
3 : 2 PULLDOWN
VIDEO NR
OFF
OFF
To SIGNAL screen for RGB
(see page 29, 30)
To SIGNAL screen for DVI
(see page 29, 30)
[
]
[
]
Digital
SIGNAL
RGB
SIGNAL
SYNC
3 : 2 PULLDOWN
VIDEO NR
3 : 2 PULLDOWN
VIDEO NR
AUTO
OFF
OFF
OFF
OFF
Note: “SIGNAL” setup menu displays a
different setting condition for each
input signal. (see page 13)
H-FREQ. 33.8
V-FREQ. 60.0
kHz
Hz
H-FREQ. 33.8
V-FREQ. 60.0
kHz
Hz
To SET UP TIMER selection Press to select POWER ON
SET UP TIMER
screen.(see page 25, 26)
TIME / POWER OFF TIME.
PRESENT TIME OF DAY 99:99
SET UP TIMER
OFF
0:00
OFF
0:00
POWER ON FUNCTION
POWER ON TIME
POWER OFF FUNCTION
POWER OFF TIME
PRESENT TIME OF DAY 99:99
OFF
0:00
OFF
0:00
POWER ON FUNCTION
POWER ON TIME
POWER OFF FUNCTION
POWER OFF TIME
Press to set up POWER
ON TIME/ POWER OFF
TIME.
SET UP TIMER
R
PRESENT TIME OF DAY 99:99
OFF
0:00
OFF
0:00
POWER ON FUNCTION
POWER ON TIME
POWER OFF FUNCTION
POWER OFF TIME
Press the R button to return to
“SET UP” menu.
To PRESENT TIME SETUP.
(see page 25)
PRESENT TIME SETUP
PRESENT TIME OF DAY 99:99
SET
99:99
PRESENT TIME OF DAY
17
ASPECT Controls
The LCD Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format
picture.
ASPECT
INPUT
Press repeatedly to move through the aspect options:
SURROUND
NORMAL
Panasonic AUTO
ZOOM
FULL
JUST
VOL
[from the unit]
N
R
The aspect mode changes each time the ENTER button
is pressed.
INPUT
MENU
/
VOL +/
ENTER/
PICTURE
SOUND
SET UP
[During MULTI PIP Operations]
• Picture and Picture, Picture in Picture
NORMAL
FULL
MULTI
PIP
ZOOM
:
:
SWAP
SELECT MOVE
ASPECT
• Others
Aspect switching is not possible.
PICTURE
POS. /SIZE
Notes:
• For PC signal input, the mode switches between “NORMAL”, “ZOOM” and “FULL” only.
• For a 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p signal input during
“COMPONENT”,“RGB” and “DVI” input signal, the mode is set to “FULL” mode, and switching is not possible.
• Panasonic AUTO can be selected only during Video signal input.
• The aspect mode is memorized separately for each input terminal (INPUT1, INPUT2 and PC IN).
Mode
Picture
Explanation
4
NORMAL will display a 4:3 picture at its standard 4:3 size.
NORMAL
NORMAL
3
4
4
4
4
16
16
16
16
ZOOM mode magnifies the central section of the picture.
ZOOM
ZOOM
FULL
JUST
3
3
3
3
9
9
9
FULL will display the picture at its maximum size but with slight
elongation.
FULL
JUST
JUST mode will display a 4:3 picture at its maximum size but
with aspect correction applied to the center of the screen so that
elongation is only apparent at the left and right edges of the screen.
The size of the picture will depend on the original signal.
The display will automatically become enlarged (depending on the
picture source), allowing you to view the picture at its maximum size.
Notes:
Panasonic AUTO
9
• Panasonic AUTO mode is designed to automatically adjust the
aspect ratio to handle a mix of 16:9 and 4:3 program material.
Certain 4:3 program material, such as stock market data screens,
may occasionally cause the image size to change unexpectedly.
When viewing such programs, it is recommended that the ASPECT
be set to NORMAL.
• If adjusting the PICTURE V-POS/V-SIZE in Panasonic AUTO with
FULL mode, the adjustment is not memorized. When exiting the
mode, the screen will return to a former adjustment.
For an elongated image Image is expanded
Panasonic
AUTO
4
Changes in
accordance with the
Panasonic AUTO
mode setting (see
page 29).
3
For a 4:3 image
18
Adjusting PICTURE POSITION / SIZE
PICTURE
POS. /SIZE
1
2
INPUT
Press to display the PICTURE POS. /SIZE menu.
SURROUND
Press to select H-POS / H-SIZE / V-POS / V-SIZE /
CLOCK PHASE.
VOL
N
R
PICTURE
SOUND
SET UP
ZOOM
MULTI
PIP
SWAP
SELECT MOVE
Press to adjust POS. / SIZE.
PICTURE
POS. /SIZE
3
ASPECT
PC
OFF TIMER
During “VIDEO (S VIDEO)”,
“COMPONENT” and “DVI” input signal.
R
PICTURE POS. /SIZE
4
Press to exit from adjust mode.
NORMAL
NORMALIZE
H-POS
Notes:
H-SIZE
V-POS
V-SIZE
• Adjustment details are memorized separately for different input signal formats
(Adjustments for component signals are memorized for 525 (480) / 60i · 60p,
625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080)
/ 50i, 750 (720) / 60p · 50p each, and RGB/PC/DVI signals are memorized for
each frequency.)
During “RGB / PC” input signal.
PICTURE POS. /SIZE
• If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture
position will shift up or down. This picture position movement cannot be
controlled by the PICTURE POS. / SIZE function.
NORMAL
NORMALIZE
H-POS
H-SIZE
• If adjusting the PICTURE V-POS / V-SIZE in Panasonic AUTO with FULL mode,
the adjustment is not memorized. When exiting the mode, the screen will return
to a former adjustment.
V-POS
V-SIZE
CLOCK PHASE
H-POS Adjust the horizontal position.
H-SIZE Adjust the horizontal size.
V-POS Adjust the vertical position.
V-SIZE Adjust the vertical size.
CLOCK PHASE
Eliminate the flickering and distortion.
(RGB/PC in mode)
N
NORMALIZE
Normalization)
Helpful Hint (
/
While the PICTURE POS. / SIZE display is active, if either the N button on the remote control is pressed at any time or
the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
19
MULTI PIP
MULTI
PIP
INPUT
Press repeatedly.
SURROUND
Each time pressing this button main picture and sub picture will be
displayed as follows bellow.
VOL
N
R
PICTURE
SOUND
SET UP
MULTI
PIP
ZOOM
SELECT MOVE
SWAP
[Picture and Picture]
Main picture Sub picture
[Picture out Picture]
[Picture in Picture]
Main picture
Sub picture Main picture Sub picture
MULTI
PIP
MULTI
PIP
MULTI
PIP
Normal
Viewing
B
A
A
A B
B
SWAP
SWAP
SWAP
SWAP
Press to swap main
picture and sub picture.
A
B
B
B A
A
[Example] Main picture label is bright
Sub picture label is bright
SELECT
SELECT
PC1
VIDEO2
PC1
VIDEO2
Press to select the input mode.
A
A
Under main Picture and sub picture display,
select the picture which you would like to
change input modes.
B
B
Input modes switching is possible
Main picture label is changed Sub picture label is changed
INPUT
VIDEO2
VIDEO1
PC1
VIDEO2
Press to change input signal.
A
C
B
D
ZOOM
MOVE
Picture is changed
Press to move the sub picture.
Each time the location of the sub picture will be moved.
Notes:
• This button is effective only in the picture in picture.
• The sub picture may be hidden by the on screen display, depending on its position.
Notes:
• Sound output is from the main picture.
• In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.
• The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of
the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals
displayed on the main picture and depending on the 2-picture display mode.
• Due to the small dimensions of the sub pictures used for the picture in picture and picture out picture displays, these
sub pictures cannot be shown in detail.
• Two computer screen pictures are displayed in a simplified format, and it may not be possible to discern details on
them satisfactorily.
20
PICTURE Adjustments
PICTURE
1
2
Press to display the PICTURE menu.
INPUT
SURROUND
VOL
Select to adjust each item.
N
R
Press to select the menu to adjust.
PICTURE
SOUND
SET UP
Select the desired level by looking at the picture
behind the menu.
MULTI
PIP
ZOOM
SWAP
SELECT MOVE
ASPECT
PICTURE
POS. /SIZE
PICTURE
1/2
NORMAL
NORMALIZE
Press the left or right button to switch between modes.
STANDARD
PICTURE MENU
BACK LIGHT
PICTURE
BRIGHTNESS
COLOR
AUTO
CINEMA
STANDARD
DYNAMIC
20
25
0
0
0
AUTO
TINT
SHARPNESS
Automatically selects the mode that best suits the
brightness of the environment.
3
STANDARD
PICTURE
2/2
NORMAL
OFF
ON
For viewing in standard (evening lighting) environments.
This menu selects the normal levels of BRIGHTNESS
and PICTURE.
COLOR TEMP
COLOR MANAGEMENT
ADVANCED SETTINGS
DYNAMIC
For viewing in brighter environments.
This menu selects higher than normal levels of
BRIGHTNESS and PICTURE.
Press to select “ON”.
Press to enter
Advanced Settings.
CINEMA
Ideal for movies.
ADVANCED SETTINGS ON
Enables fine picture adjustment at a
professional level (see next page).
Note:
If you would like to change the picture and color of the
selected PICTURE menu to something else, adjust using
the items in the PICTURE menu. (see next page)
ADVANCED SETTINGS
NORMAL
NORMALIZE
0
0
0
0
0
0
BLACK EXTENSION
INPUT LEVEL
W/B HIGH R
W/B HIGH B
W/B LOW R
W/B LOW B
GAMMA
Press the left or right button to switch between modes.
NORMAL
COOL
WARM
2.2
OFF
AGC
ADVANCED SETTINGS OFF
Displays images with settings of the
PICTURE menu.
COLOR MANAGEMENT ON
Enables vivid color adjustment automatically.
N
NORMALIZE
Normalization)
Helpful Hint (
/
While the “PICTURE” menu is displayed, if either the N button on the remote control is pressed at any time or the
ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
21
PICTURE Adjustments
Notes:
Item
Effect
Adjustments
• “COLOR” and “TINT” settings cannot be
adjusted for “RGB/PC” and “DVI” input
signal.
• You can change the level of each
function (BACK LIGHT, PICTURE,
B R I G H T N E S S , C O L O R , T I N T,
SHARPNESS) for each PICTURE
MENU.
• The setting details for STANDARD,
DYNAMIC and CINEMA respectively
are memorized separately for each input
mode (INPUT1, INPUT2 and PC IN).
• The “TINT” setting can be adjusted
for NTSC signal only during “VIDEO
(S VIDEO)” input signal.
BACK LIGHT
Luminance of the back light is adjusted.
Darker
Brighter
More
PICTURE
Adjusts the proper picture contrast.
Less
Adjusts for easier viewing of dark
pictures such as night scenes and
black hair.
BRIGHTNESS
Darker
Brighter
COLOR
TINT
Adjusts color saturation.
Less
Reddish
Less
More
Greenish
More
Adjusts for natural flesh tones.
Adjusts picture sharpness.
SHARPNESS
ADVANCED SETTINGS
Item
Effect
Details
BLACK
EXTENSION
Adjusts the dark shades of the image in gradation.
Less
Less
Less
Less
Less
Less
Down
OFF
More
Adjustment of parts which are extremely bright and hard to see.
(This cannot be adjusted when the input signal is DVI.)
INPUT
LEVEL
More
More
More
More
More
Up
W/B HIGH R
W/B HIGH B
W/B LOW R
W/B LOW B
GAMMA
Adjusts the white balance for light red areas.
Adjusts the white balance for light blue areas.
Adjusts the white balance for dark red areas.
Adjusts the white balance for dark blue areas.
S CURVE
2.0
2.2
2.5
AGC
Increases the brightness of dark signal automatically.
ON
Notes:
• Carry out “W/B” adjustment as follows.
1. Adjust the white balance of the bright sections using the “W/B HIGH R” and “W/B HIGH B” settings.
2. Adjust the white balance of the dark sections using the “W/B LOW R” and “W/B LOW B” settings.
3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.
• The adjustment values are memorized separately for each input mode (INPUT1, INPUT2 and PC IN).
• The adjustment range values should be used as an adjustment reference.
N
NORMALIZE
Normalization)
Helpful Hint (
/
On the remote control unit, while the “ADVANCED SETTINGS” menu is displayed, if either the N button is pressed at
any time or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the
factory settings.
22
SOUND Adjustment
1
2
SOUND
INPUT
Press to display the SOUND menu.
SURROUND
VOL
N
R
Select to adjust each item.
Press to select the menu to adjust.
PICTURE
SOUND
SET UP
ZOOM
MULTI
PIP
SWAP
SELECT MOVE
Select the desired level by listening to the sound.
PICTURE
POS. /SIZE
ASPECT
PC
OFF TIMER
DISPLAY
BASS
Adjusts low sounds
SOUND
STANDARD
Emits the original sound.
NORMAL
NORMALIZE
AUDIO MENU
BASS
STANDARD
0
0
TREBLE
Adjusts high sounds
TREBLE
BALANCE
SURROUND
0
BALANCE
Adjusts left and right volumes
AUTO
Automatically controls
proper volume level.
OFF
SURROUND
Select ON or OFF
Notes:
• Press the SURROUND button to directly turn the surround effect ON and OFF. (see page 13)
• BASS, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU (STANDARD, AUTO).
N
NORMALIZE
Normalization)
Helpful Hint (
/
While the “SOUND” menu is displayed, if either the N button on the remote control is pressed at any time or the
ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
MUTE
Useful when answering the phone or receiving unexpected visitors.
Press this button to mute the sound.
Press again to reactivate sound. Sound is also reactivated when power is turned off or
volume level is changed.
23
Digital Zoom
This displays an enlargement of the designated part of the displayed image.
Display the “Operation Guide”.
1
ZOOM
MOVE
EXIT
Press to access Digital Zoom.
The “Operation Guide” will be displayed.
1
During Digital Zoom, only the following buttons can be operated.
[Remote control]
[Unit]
SURROUND button
MUTE button
INPUT
SURROUND
VOL
N
R
INPUT
MENU
/
VOL +/
ENTER/
VOL button
PICTURE
SOUND
SET UP
ZOOM
VOL button
MULTI
PIP
SWAP
SELECT MOVE
PICTURE
POS. /SIZE
ASPECT
PC
OFF TIMER
OFF TIMER button
2
3
Select the area of the image to be enlarged.
Press on the enlargement location to select.
The cursor will move.
EXIT
2
Select the magnification required for the enlarged display.
Each time this is pressed, the magnification factor changes.
This is shown in the image being displayed.
× 1
× 2
× 3
× 4
Return to normal display (quit Digital Zoom).
4
R
Press to exit from the Digital Zoom.
Notes:
• When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.
• The Digital Zoom function cannot be selected while in the following operation state:
“Multi-viewer” (Picture in Picture, Picture out Picture, Picture and Picture) operation. (see page 20)
• While Digital Zoom is in operation, “Adjusting PICTURE POSITION/SIZE” cannot be used.
• The Digital Zoom capability is functional for the following component signals:
525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 750 (720) / 60p · 50p, 1250 (1080) / 50i
• The Digital Zoom capability is functional for the following composite signals:
NTSC, PAL, SECAM
24
PRESENT TIME SETUP / SET UP TIMER
The timer can switch the LCD Display ON or OFF.
INPUT
Before attempting Timer Set, confirm the PRESENT TIME OF DAY and adjust if necessary.
SURROUND
Then set POWER ON TIME / POWER OFF TIME.
VOL
N
R
SET UP
1
Press to display the SET UP menu.
PICTURE
SOUND
SET UP
SET UP
1/2
Press to select SET UP TIMER or
PRESENT TIME SETUP.
2
SIGNAL
COMPONENT/RGB-IN SELECT
RGB
PC
INPUT LABEL
POWER SAVE
OFF
OFF
OFF
OFF
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
OSD LANGUAGE
Press to display the SET UP TIMER screen or
PRESENT TIME SETUP screen.
(
)
ENGLISH US
SET UP
2/2
SET UP TIMER
PRESENT TIME SETUP
PRESENT TIME SETUP
Display the PRESENT TIME SETUP screen.
To set up PRESENT TIME OF DAY, follow the procedure described below.
Press to select PRESENT TIME OF DAY.
1
PRESENT TIME SETUP
PRESENT TIME OF DAY 99:99
SET
PRESENT TIME OF DAY
Press to set up PRESENT TIME OF DAY.
99:99
button: Forward
button: Back
Notes:
• Pressing “ ” or “ ” button once changes PRESENT TIME OF DAY 1minute.
• Pressing “ ” or “ ” button continuously changes PRESENT TIME OF DAY by 15 minutes.
Press to select Set.
2
3
PRESENT TIME SETUP
PRESENT TIME OF DAY 99:99
SET
PRESENT TIME OF DAY
99:99
Press to store PRESENT TIME SETUP.
Note:
Set cannot be selected unless PRESENT TIME OF DAY is set.
SET UP
Press to exit from PRESENT TIME SETUP.
25
PRESENT TIME SETUP / SET UP TIMER
SET UP TIMER
Display the SET UP TIMER SCREEN.
Press to select
POWER ON TIME / POWER OFF TIME.
SET UP TIMER
PRESENT TIME OF DAY 99:99
1
Press to set up POWER ON TIME / POWER OFF
TIME.
OFF
0:00
OFF
0:00
POWER ON FUNCTION
POWER ON TIME
POWER OFF FUNCTION
POWER OFF TIME
button: Forward
button: Back
Notes:
• Pressing “ ” or “ ” button once changes POWER ON TIME / POWER OFF TIME
1minute.
• Pressing “ ” or “ ” button continuously changes POWER ON TIME / POWER OFF
TIME by 15 minutes.
Press to select POWER ON FUNCTION
/ POWER OFF FUNCTION.
SET UP TIMER
2
PRESENT TIME OF DAY 99:99
OFF
0:00
OFF
0:00
POWER ON FUNCTION
POWER ON TIME
POWER OFF FUNCTION
POWER OFF TIME
Press to select ON.
R
3
Press twice to exit from SET UP.
Note:
Timer function will not work unless “PRESENT TIME OF DAY” is set.
26
Reduces power consumption
• POWER SAVE:
When this function is turned ON, luminous level of the LCD Display is suppressed, so
power consumption is reduced.
• STANDBY SAVE:
When this function is turned ON, power consumption of the microcomputer is reduced
during power supply standby (see page 12, 14-15), so standby power of the set is reduced.
• POWER MANAGEMENT:
The unit power supply is turned ON or OFF depending on whether or not there is a signal
during PC input mode.
This function is enabled when it is turned ON. (Only during input from PC(Mini D-sub)
terminal)
• AUTO POWER OFF:
Equipment power supply is turned OFF when there is no signal.
When this is set to On, the power supply of the unit goes Off 10 minutes after the input
signals stop.
This function is effective for input signals except input from PC (Mini D-sub) terminal.
Press to select
“POWER SAVE”
“STANDBY SAVE”
“POWER MANAGEMENT”
“AUTO POWER OFF”.
SET UP
1/2
1
SIGNAL
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
PC
POWER SAVE
OFF
OFF
OFF
OFF
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
OSD LANGUAGE
Press to select “ON” or “OFF”.
2
On
Off
(
)
ENGLISH US
3
SET UP
Press to exit from SET UP.
Note:
“POWER MANAGEMENT” and “AUTO POWER OFF” are effective during normal viewing (one picture screen) only.
Customizing the Input labels
This function can change the label of the Input signal to be displayed.
SET UP
1/2
Press to select INPUT LABEL.
SIGNAL
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
POWER SAVE
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
OSD LANGUAGE
PC
Press to change the INPUT LABEL.
OFF
OFF
OFF
OFF
(
)
ENGLISH US
Note:
While selecting a Input signal through Optional Terminal Board connected to Slot 1 and Slot 2, the Input label will
depend on each Optional Terminal Board.
INPUT LABELS for Slot 1, Slot 2 and miniD-sub:
[Slot1 Input] INPUT1/VIDEO1/COMPONENT1/RGB1/DIGITAL1/PC1/DVD1/CATV1/VCR1/STB1
[Slot2 Input] INPUT2/VIDEO2/COMPONENT2/RGB2/DIGITAL2/PC2/DVD2/CATV2/VCR2/STB2
[PC (MiniD-sub) input] PC/COMPONENT/RGB/DVD/STB
27
SET UP for Input Signals
COMPONENT / RGB IN SELECT
Select to match the signals from the source connected to the COMPONENT / RGB input terminals.
Y, PB, PR signals
“COMPONENT”
INPUT
R, G, B, HD, VD signals
“RGB”
SURROUND
VOL
1
N
R
SET UP
Press to display the SET UP menu.
PICTURE
SOUND
SET UP
ZOOM
Press to select the “COMPONENT / RGB-IN
SELECT”.
2
MULTI
PIP
SWAP
SELECT MOVE
Press to select the desired mode.
COMPONENT
RGB
SET UP
1/2
SIGNAL
COMPONENT/RGB-IN SELECT
RGB
R
INPUT LABEL
PC
3
POWER SAVE
OFF
OFF
OFF
OFF
Press to exit from adjust mode.
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
OSD LANGUAGE
(
)
ENGLISH US
Note:
Selection may not be possible, depending on which optional board is installed.
– For NTSC AV images
3D Y/C FILTER
Select “SIGNAL” from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.
(“SIGNAL [VIDEO]” menu is displayed.)
SET UP
1/2
Press to select the “3D Y/C FILTER (NTSC)”.
1
SIGNAL
COMPONENT/RGB-IN SELECT
RGB
PC
Press to set ON / OFF.
INPUT LABEL
POWER SAVE
OFF
OFF
OFF
OFF
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
OSD LANGUAGE
(
)
ENGLISH US
Press ACTION ( ) button
2
R
Press to exit from adjust mode.
[
]
SIGNAL
VIDEO
3D Y/C FILTER (NTSC)
COLOR SYSTEM
3 : 2 PULLDOWN
Panasonic AUTO (4 : 3)
VIDEO NR
ON
AUTO
OFF
NORMAL
OFF
Note:
When ON, this setting only affects NTSC input signals.
28
SET UP for Input Signals
COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input
signal mode.(“SIGNAL [VIDEO]” menu is displayed.)
SET UP
1/2
SIGNAL
COMPONENT/RGB-IN SELECT
RGB
Press to select the “COLOR SYSTEM” or
“Panasonic AUTO”.
INPUT LABEL
PC
POWER SAVE
OFF
OFF
OFF
OFF
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
OSD LANGUAGE
Press to select each function.
(
)
ENGLISH US
If the image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals the image may in
rare cases become unstable. Should this occur, set
the system to match the format of the input signal.
Press ACTION ( ) button
[
]
SIGNAL
VIDEO
3D Y/C FILTER (NTSC)
COLOR SYSTEM
3 : 2 PULLDOWN
Panasonic AUTO (4 : 3)
VIDEO NR
ON
AUTO
OFF
NORMAL
OFF
Mode
Function
COLOR SYSTEM Set the color system to match the input signal. If set to “AUTO”, the color system is
determined automatically.
AUTO
PAL
SECAM
M.NTSC
NTSC
Panasonic AUTO Set to “NORMAL” to view 4:3 images in an unchanged format when Panasonic AUTO is
(4:3) selected. If you would like to view 4:3 images in Just format, set to “JUST”.
3:2 PULLDOWN / VIDEO NR
3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie
pictures, which are recorded at 24 frames per second.
SET UP
1/2
If the picture is not stable, turn the setting to OFF.
SIGNAL
COMPONENT/RGB-IN SELECT
RGB
Note:
When ON, this setting only affects the following signal input:
• NTSC / PAL signal input during “VIDEO (S VIDEO)” input signal.
• 525i(480i) 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal.
INPUT LABEL
POWER SAVE
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
OSD LANGUAGE
PC
OFF
OFF
OFF
OFF
VIDEO NR: Automatically reduces unwanted picture noise.
Note:
(
)
ENGLISH US
VIDEO NR cannot be adjusted while a PC signal is being applied.
Press ACTION ( ) button
[
]
[
]
]
SIGNAL
VIDEO
SIGNAL
RGB
Press to select 3:2 PULLDOWN
or VIDEO NR.
1
2
3D Y/C FILTER (NTSC)
COLOR SYSTEM
3 : 2 PULLDOWN
Panasonic AUTO (4 : 3)
VIDEO NR
ON
AUTO
OFF
NORMAL
OFF
SYNC
3 : 2 PULLDOWN
VIDEO NR
AUTO
OFF
OFF
Press to set ON/OFF.
H-FREQ. 33.8
V-FREQ. 60.0
kHz
Hz
[
]
[
SIGNAL
COMPONENT
SIGNAL
Digital
3 : 2 PULLDOWN
VIDEO NR
OFF
OFF
3 : 2 PULLDOWN
VIDEO NR
OFF
OFF
R
H-FREQ. 33.8
V-FREQ. 60.0
kHz
Hz
Press to exit from adjust mode.
29
SET UP for Input Signals
SYNC
Select SIGNAL from the “SET UP” menu during RGB input signal.
SET UP
1/2
SIGNAL
COMPONENT/RGB-IN SELECT
RGB
Press to adjust.
1
INPUT LABEL
PC
POWER SAVE
OFF
OFF
OFF
OFF
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
OSD LANGUAGE
(
)
ENGLISH US
Press ACTION ( ) button
R
[
]
SIGNAL
RGB
2
Press to exit from adjust mode.
SYNC
3 : 2 PULLDOWN
VIDEO NR
AUTO
OFF
OFF
H-FREQ. 33.8
V-FREQ. 60.0
kHz
Hz
Setting RGB sync signal
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT
signal).
SYNC
AUTO
AUTO:
ON G:
VBS:
The H and V sync or synchronized signal are automatically selected.
If both input, it is selected the H and V sync.
Uses a synchronized signal on the Video G signal, which is input
from the G connector.
Uses a synchronized signal of Composite Sync input, which is input
from the HD connector.
SYNC
SYNC
ON G
VBS
H-FREQ. (kHz) / V-FREQ. (Hz)
Displays the H (Horizontal) / V (Vertical) frequencies.
This display is valid only for RGB/PC and DVI input signal.
Display range:
Horizontal 15 - 110 kHz
H-FREQ. 33.8
V-FREQ. 60.0
kHz
Hz
Vertical
48 - 120 Hz
30
Shipping condition
This function allows you to reset the unit to the factory setting.
INPUT
SURROUND
1
SET UP
VOL
Press to display the SET UP menu.
N
R
Press to select “OSD LANGUAGE”.
2
PICTURE
SOUND
SET UP
MULTI
PIP
ZOOM
SELECT MOVE
SWAP
Press and hold till the SHIPPING menu is
displayed.
1/2
SET UP
3
4
SIGNAL
COMPONENT/RGB-IN SELECT
RGB
PC
OFF
OFF
OFF
OFF
INPUT LABEL
POWER SAVE
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
OSD LANGUAGE
Press to select “YES”.
(
)
ENGLISH US
YES
SHIPPING
Press to confirm.
[from the unit]
1 Press the MENU button till the Setup menu is displayed.
2 Press the Volume Up “+” or Down “–” button to select “OSD LANGUAGE”.
3 Press and hold the ENTER button till the SHIPPING menu is displayed.
4 Press the Volume Up “+” or Down “–” button to select “YES”.
5 Press the ENTER button.
Note:
Press the R button to return to SET UP menu when SHIPPING menu is displayed.
31
Troubleshooting
Before you call for service, determine the symptoms and make a few simple checks as shown below.
Symptoms
Checks
Picture
Sound
Electrical Appliances
Cars / Motorcycles
Fluorescent light
Interference
Noisy Sound
Volume
Normal Picture
No Picture
No Sound
(Check whether the mute function has been activated on the remote control.)
Not plugged into AC outlet
Not switched on
PICTURE and BRIGHTNESS/Volume setting
(Check by pressing the power switch or stand-by button on the remote control.)
No Sound
If a signal with a non-applicable color system format, or frequency is input, only the
input terminal indication is displayed.
No Picture
No Color
Normal Sound
Color controls set at minimum level.
Normal Sound (see page 21, 22)
COLOR SYSTEM (see page 29)
This is a characteristic of liquid crystal panels and is not a problem. The liquid
crystal panel is built with very high precision technology giving you fine picture
details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of
blue, green, or red.
There may be red spots,
blue spots and green
spots on the screen.
Normal Sound
Please note this does not affect the performance of your LCD.
No remote control operations can be performed.
Check whether the batteries have discharged completely and, if they have not,
whether they were inserted properly.
Check whether the remote control sensor is exposed to an outdoor light or a strong
fluorescent light.
Check whether the remote control designed specifically for use with the unit is
being used. (The unit cannot be operated by any other remote control.)
A cracking sound is sometimes heard from the unit.
If there is nothing wrong with the picture or sound, this is the sound of the
cabinet undergoing very slight contractions in response to changes in the room
temperature. There are no adverse effects on the performance or other aspects.
The top or bottom of the picture on the screen is cut Adjust the position of the picture on the screen.
off when I use the zoom function.
Areas at the top and bottom of the screen where When using a video software program (such as a cinema size program) with a
the image is missing appear when I use the zoom screen wider than one in the 16:9 mode, blank areas separate from the images are
function.
formed at the top and bottom of the screen.
I can hear sounds coming from inside the unit.
When the power is turned on, a sound of the display panel being driven may be
heard: This is normal and not indicative of malfunctioning.
The main unit is hot.
The main unit radiates heat and some of the parts may become hot. This is not a
problem for performance or quality.
Set up at a location with good ventilation.
Do not cover the ventilation holes of the Display with a tablecloth etc., and do not
place on top of other equipment.
This LCD Display uses special image processing. Hence a slight time lag may occur between image and audio, depending on the type of
input signal. However, this is not a malfunction.
LCD Display panel
Symptoms
Check
It takes a while for the picture The unit digitally processes the various signals in order to reproduce estheticically pleasing images. As
to appear.
such, it sometimes takes a few moments for the picture to appear when the power has been turned on,
when the input has been switched or when the images for the main picture and sub picture on the two
screens are swapped.
Whirring sounds can be heard The display unit is fitted with a cooling fan to dissipate heat generated during normal use. The whirring
from the display unit. sound is caused by rotation of the fan and is not a malfunction.
32
Input signal can be displayed
Applicable input signals for PC Input (D-sub 15P) ( Mark)
∗
Horizontal
Vertical
When Multi Screen
and Digital Zoom
Signal name
COMPONENT RGB PC
frequency (kHz) frequency (Hz)
1
2
3
4
5
6
7
8
525 (480) / 60i
525 (480) / 60p
625 (575) / 50i
625 (575) / 50p
750 (720) / 60p
15.73
31.47
15.63
31.25
45.00
37.50
33.75
28.13
27.00
33.75
28.13
27.00
31.25
31.46
31.47
37.86
37.50
43.27
31.47
35.16
37.88
48.08
46.88
53.67
48.36
56.48
60.02
68.68
67.50
60.00
85.94
63.98
79.98
91.15
75.00
81.25
37.88
48.36
35.00
49.72
68.68
59.94
59.94
50.00
50.00
60.00
50.00
60.00
50.00
47.92
30.00
25.00
24.00
50.00
70.07
59.94
72.81
75.00
85.01
59.94
56.25
60.32
72.19
75.00
85.06
60.00
70.07
75.03
85.00
75.00
60.00
85.00
60.02
75.03
85.02
60.00
65.00
60.32
60.00
66.67
74.54
75.06
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
1
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
750 (720) / 50p
1,125 (1,080) / 60i
1,125 (1,080) / 50i
1,125 (1,080) / 24p
1,125 (1,080) / 24sF
1,125 (1,080) / 25p
1,125 (1,080) / 30p
1,250 (1,080) / 50i
640 × 400 @70 Hz
640 × 480 @60 Hz
640 × 480 @72 Hz
640 × 480 @75 Hz
640 × 480 @85 Hz
852 × 480 @60 Hz
800 × 600 @56 Hz
800 × 600 @60 Hz
800 × 600 @72 Hz
800 × 600 @75 Hz
800 × 600 @85 Hz
1,024 × 768 @60 Hz
1,024 × 768 @70 Hz
1,024 × 768 @75 Hz
1,024 × 768 @85 Hz
1,152 × 864 @75 Hz
1,280 × 960 @60 Hz
1,280 × 960 @85 Hz
1,280 × 1,024 @60 Hz
1,280 × 1,024 @75 Hz
1,280 × 1,024 @85 Hz
1,600 × 1,200 @60 Hz
1,600 × 1,200 @65 Hz
1,066 × 600 @60 Hz
1,366 × 768 @60 Hz
Macintosh13” (640 × 480)
Macintosh16” (832 × 624)
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
2
∗
∗
∗
∗
2
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
41 Macintosh21” (1,152 × 870)
1: When selected the RGB format and 525p signal input to the D-sub terminal, it is recognized as VGA 60Hz signal.
2: When inputted VGA 60Hz format signal from the other than D-sub terminal, it is recognized as 525p signal.
Note: Signals without above specification may not be displayed properly.
∗
∗
33
Specifications
TH-32LHD7UX
Power Source
120 V AC, 50/60 Hz
Power Consumption
Maximum
234 W
Save OFF 0.8 W, Save ON 0.6 W
Stand-by condition
Power off condition
LCD Display panel
Contrast Ratio
0.2 W
1,366 × 768 pixels widescreen LCD panel.
800:1
Screen size
(No.of pixels)
27” 15 32 (697.7 mm) (W) × 15” 29 64 (392.3 mm) (H) × 31” 33
/ / /64 (800.4 mm) (diagonal)
1,049,088 (1,366 (W) × 768 (H))
[4,096 × 768 dots]
Operating condition
Temperature
32 °F - 104 °F (0 °C - 40 °C)
20 % - 80 %
Humidity
Applicable signals
Color System
NTSC, PAL, PAL60, SECAM, Modified NTSC
525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 50i · 24p ·
25p · 30p · 24sF ···· SMPTE274M, 1250 (1080) / 50i
WXGA display
Scanning format
PC signals
SVGA, XGA, SXGA, UXGA ···· (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
(HIGH-DENSITY D-SUB 15PIN)
Component
Y :
R,G,B/0.7 Vp-p (75-ohm)
PC
1.0 Vp-p (75-ohm)
B
R
B
R
P • P / C • C
:
0.7 Vp-p (75-ohm)
HD, VD/1.0 - 5.0 Vp-p (high impedance)
0.5 Vrms (high impedance)
AUDIO IN (M3 JACK)
EXTERNAL CONTROL TERMINAL (D-SUB 9PIN)
RS-232C COMPATIBLE
SERIAL
SPEAKERS (6 Ω)
Accessories Supplied
Remote Control Transmitter
Batteries
16W [8 W + 8 W] (10 % THD)
EUR646535
2 × AA Size
(TMME203) × 2
Fixing bands
J0KF00000018 × 2, J0KG00000054 × 2
Ferrite core
Dimensions (W × H × D)
Mass (weight)
31” 11
/
16 (805 mm) × 19” 43
/
64 (499.6 mm) × 4” 5/32 (102 mm) (exclusive of protruding portion)
approx. 36.4 lbs
approx. 45.2 lbs
main unit only
with speakers
Note:
Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
34
Panasonic Broadcast & Television Systems Company
Unit of Panasonic Corporation of North America
Hospitality Group
One Panasonic Way 2A-4
Secaucus, NJ 07094
PANASONIC PRODUCT
Limited Warranty
installation, set-up adjustments, improper antenna,
inadequate signal pickup, maladjustment of consumer
controls, improper operation, power line surge,
improper voltage supply, lighting damage, smoke,
chemical vapors, or service by anyone other than an
authorized repair facility, or damaged this attributable
to acts of God.
Panasonic Broadcast & Television Systems Company
(collectively referred to as “the Warrantor”) will repair
this product and all included accessories with new or
refurbished parts, free of charge in the USA of the
original purchase in the event of a defect in materials
or workmanship as follow:
LIMITS AND EXCLUSIONS
Part
Warranty
Labor
Warranty
MODELS
There are no express warranties except as listed above.
LCD Display
1 Year
1 Year
THE WARRANTOR SHALL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT,
OR ARISING OUT OF ANY BREACH OF THE
WARRANTY. ALL EXPRESS AND IMPLIED
WARRANTIES, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
PARTICULAR PURPOSE, ARE LIMITED TO THE
APPLICABLE WARRANTY PERIOD SET FORTH
ABOVE.
Exceptions
10 days
none
All Accessories
(Ex: Cables & etc)
Service in the USA may be obtained during the
warranty period by contacting Panasonic Broadcast &
Television Systems Company Factory Servicenter
listed at the bottom of this page or by calling toll free
1-800-526-6610 to locate an authorized Servicenter.
Some states do not allow the exclusion or limitation of
incidental or consequential damages, or limitations on
how long an implied warranty lasts, so the above
exclusions or limitations may nor apply to you.
This warranty gives you specific legal rights and you
may other rights, which vary from state to state.
This warranty is extended only to the original
purchaser and is non transferable. A purchase receipt
or other proof of date of original purchase will be
required before warranty service is rendered.
This warranty only covers failures due to defects in
materials or workmanship, which occur during normal
use. The warranty does not cover damage which occur
in shipment, or failures which are caused by products
not supplied by the warrantor, or failures which result
If you have a problem with this product that is not
handled to your satisfaction, then write the Consumer
Affairs Department at the address indicated above.
FOR THE NEAREST SERVICE CENTER
1-800-526-6610
or
Panasonic Broadcast & Television Systems Company
Service Planning
50 Meadowlands Pkwy – 2A-4
Secaucus, NJ 07094
201-392-6241
Customer’s Record
The model number and serial number of this product can be found on its back cover. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your
purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
Serial Number
2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
©
Panasonic Broadcast & Television Systems Company
Unit of Panasonic Corporation of North America
Executive Office :
One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000
EASTERN ZONE : One Panasonic Way 4E-7 Secaucus, NJ 07094 (201) 348-7621
Mid-Atlantic/New England : One Panasonic Way 4E-7 Secaucus, NJ 07094 (201) 348-7621
Southeast Region : 1225 Northbrook Parkway, Ste 1-160 Suwanee GA 30024 (770)338-6835
Central Region : 1707 N Randall Road E1-C-1, Elgin, IL 60123 (847)468-5200
WESTERN ZONE : 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500
Dallas Region : 6226 Abington Way, Houston, TX 77008 (713) 802-2726
No. CA/Northwest Region : 5870 Stone Ridge, #3, Pleasanton, CA (925) 416-5108
Government Marketing Department : 52 West Gude Drive, Rockville, MD 20850 (301) 738-3840
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
Printed in Japan
MBS0105S0
|