OWNER'S MANUAL
51CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 5145PF
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4164
Standards Australia
APP No: N15959
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Contents
Features ........................................................................................................................
Important Safety Cautions ..........................................................................................
Identification of Controls ............................................................................................
Front view .................................................................................................................
Back view ..................................................................................................................
Remote control .........................................................................................................
Battery installation ...............................................................................................
Effective range of the remote ...............................................................................
Installation ....................................................................................................................
Connecting antenna ..................................................................................................
Connect to video and audio equipment ....................................................................
Operations ....................................................................................................................
Menu introduction .....................................................................................................
Turning on .................................................................................................................
Turning off .................................................................................................................
Presetting programs ..................................................................................................
Auto search ..........................................................................................................
Manual search .....................................................................................................
Fine Tuning ..........................................................................................................
Editing programs .......................................................................................................
Channel skipping .................................................................................................
Classifying Programs ...........................................................................................
Channel exchange/copy ......................................................................................
Setting Colour/Sound system ..............................................................................
Selecting channel/input signal ..................................................................................
Selecting channel ................................................................................................
Selecting external input signal .............................................................................
Adjusting the picture/sound ......................................................................................
Clock setting .............................................................................................................
Current time setting .............................................................................................
Off timer setting ...................................................................................................
On timer setting ...................................................................................................
Setting channel timer ...........................................................................................
Message ..............................................................................................................
System setting ..........................................................................................................
Background ..........................................................................................................
Colour/sound system ...........................................................................................
Other function introduction .......................................................................................
Troubleshooting Guide ...............................................................................................
Specifications ..............................................................................................................
1
2
4
4
5
6
7
7
8
8
9
11
11
12
12
13
13
13
14
15
15
15
16
16
17
17
17
18
19
19
19
19
20
20
21
21
21
22
25
26
Features
USOC and Intellectualized I2C-bus control
Five picture modes
Program exchange/Program copy
Game/Calendar
Child lock function
200 channels
Music TV function
Noise reduction
Image enhancing
Channel scanning
Programs classified
Screen protecting function
1
Auto degaussing:
When you remove the TV set to another place or when other electronic machines near the set are
working, the colour TV set will be magnetised. The colour of the TV will be abnormal and the colour
points appear on the screen. To avoid the bad effect, an auto degaussing circuit is designed. When
the TV set is magnetised you should cut off the power to the set for at least 30 minutes to assure the
auto degaussing circuit woks well.
Identification of Controls
Front view
1
AV/TV MENU VOL- VOL+
CH-
CH+
3
4
5
8
9
2
6
7
1. Power Switch.
2. Remote Sensor.
3. Indicator.
4. AV/TV button: Video input select.
5. MENU button: To enter into menu operation.
6. VOL- button: volume down adjust; menu item adjust.
7. VOL+ button: volume up adjust; menu item adjust.
8. CH- button: channel down select; menu item select.
9. CH+ button: channel select; menu item select.
4
Back view
VIDEO
AUDIO
(2)
5
(1)
VIDEO
AUDIO
VIDEO
AUDIO
S-VIDEO
2
1
3
4
1. S-VIDEO input
2. AV1 input (VIDEO, AUDIO)
3. AV output (VIDEO, AUDIO)
4. Antenna input
5. AV2 input (VIDEO, AUDIO)
5
Identification of Controls
(continued)
Remote control
Power on/standby
Sound Mute
1
4
3
6
2
5
Direct Channel select
PRESET
SLEEP
To display PRESET menu
Sleep timer
7
8
0
9
AV
Previous channel
TV/VIDEO Input select
Channel up/menu item select
To access MENU operation
On-screen display call
Volume up/menu item adjust
PIC
DSP
CH
To display the PICTURE menu
MENU
VOL
VOL
Volume down/menu item adjust
Scanning program
Picture mode select
CH
SCAN
PP
Channel down/menu item select
Sound system select
Select program type group
TYPE SELECT C-SYS
MUSIC GAME
S-SYS
Colour system select
Playing game
Select the program in a group
To enter into music TV mode
6
Please install the batteries before using
the remote control.
5m
Notes:
Notes:
The S-VIDEO input terminal has priority over AV1 VIDEO terminal. If you want to use equipment
connect to AV1 VIDEO terminal, please disconnect any plug from S-VIDEO terminal.
Connecting the side AV input terminals
VIDEO
AUDIO
VIDEO EQUIPMENT
To video output
To audio outputs
W
Y
R
(2)
Signal
Connecting the AV output terminals
(1)
VIDEO
AUDIO
VIDEO
AUDIO
S-VIDEO
Audio Amplifier
10
Operations
Menu Introduction
Press the MENU button repeatedly to select the screen display as below. In menu
operation, press CH+/- to select item, press VOL+/- to adjust selected item.
The SYSTEM1 menu
The PICTURE menu
BRIGHTNESS
CONTRAST
COLOR
SHARPNESS
TINT
50
50
50
50
50
COLOR SYS
SOUND SYS
BACKGROUND
AUTO
BG
ON
SEL
ADJ
SEL
ADJ
The PRESET menu
(TV mode only)
The SYSTEM2 menu
PROGRAM
TYPE
008
ON
ON
ON
ZOOM
IMAGE ENHANCE
NR
CALENDAR
GAME
USER2
V-H
BAND
SKIP
OFF
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
SEL
ADJ
SEL
ADJ
The SWAP menu
(TV mode only)
The CLOCK menu
PROGRAM
EXCHANGE
COPY
007
--:--
--:--
TIME
OFF-TIME
ON-TIME
--:--
--:--
--:--
--:--
---
CH-TIME
PROGRAM
MSG-TIME
MESSAGE
--:--
SEL
ADJ
SEL
ADJ
11
Notes:
2. Sleep-timer function.
PROGRAM
TYPE
008
USER2
V-H
BAND
SKIP
OFF
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
SEL
ADJ
PROGRAM
TYPE
008
USER2
V-H
BAND
SKIP
OFF
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
SEL
ADJ
PROGRAM
TYPE
008
USER2
V-H
BAND
SKIP
OFF
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
SEL
ADJ
Operations
Presetting programs (continued)
Fine Tuning
When picture and sound's effect of a channel is poor (for
example: one or two CATV channel's picture and sound
are not standard), you can correct them by making use of
Fine tuning.
PROGRAM
TYPE
008
USER2
V-H
BAND
SKIP
OFF
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
Access the PRESET menu, then select PROGRAM item by
CH+/- and set the desired channel number (from 0~199) by
VOL+/- or Digit buttons.
SEL
ADJ
In the menu, select FINE TUNE item, then press and hold
VOL+/- buttons until the best picture and sound are obtained.
14
Operations
Editing programs
Channel skipping
After presetting the channels, you can skip unnecessary
position numbers so that only the channels you want are
selected.
PROGRAM
TYPE
008
USER2
V-H
Access the PRESET menu, then select PROGRAM item by
CH+/- and set the desired channel number (from 0~199) by
VOL+/- or Digit buttons.
BAND
SKIP
OFF
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
SEL
ADJ
In the menu, please select SKIP item and press VOL+/-
buttons to select ON.
Now the selected channel will be skipped when you browse
channels by CH+/- buttons.
PROGRAM
TYPE
008
USER2
V-H
If the SKIP is set to ON, when you select the channel by Digit
buttons, the program number displayed on the screen is purple
and a " * " symbol can be seen.
BAND
SKIP
ON
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
SEL
ADJ
To restore a skipped channel, please select the skipped
channel number by digit buttons. Then enter into the PRESET
menu to select SKIP item and set it to OFF.
Classifying programs
You can classify the programs as six types: USER1, USER2,
NEWS, SPORTS, MOVIE, TELEPLAY. The function
can help you select program more rapidly.
PROGRAM
TYPE
008
USER2
V-H
BAND
SKIP
ON
Access the PRESET menu, then select the program number.
Press CH+/- buttons to select TYPE item. Press VOL+/- buttons
to select the program type.
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
SEL
ADJ
The program types are defined by yourself. The USER1 and
USER2 types can be used to store the programs that the user
often watches or is interested in.
15
Operations
Editing programs (continued)
Channel exchange/copy
After channel presetting, you can edit the programs by
using the channel exchange and channel copy functions.
PROGRAM
EXCHANGE
COPY
007
--:--
--:--
Press MENU button repeatedly to access the SWAP menu.
Select PROGRAM item and select a channel number A
by Digit buttons.
SEL
ADJ
Select EXCHANGE item and press Digit buttons to set
another channel number B that you would like to exchange
with the program number which is displayed in the
PROGRAM item. Then press VOL+/- buttons to confirm.
PROGRAM
EXCHANGE
COPY
007
008
--:--
SEL
ADJ
Now the programs of the two channels are exchanged.
PROGRAM
EXCHANGE
COPY
007
--:--
008
Select COPY item and press Digit buttons to select a
channel number C. Then press VOL+/- buttons to confirm.
Now the program in channel A will be copied to channel C.
SEL
ADJ
Setting colour/sound system
If the picture's colour or sound is abnormal, you can
adjust colour or sound system as follows.
Press C-SYS button repeatedly and the colour system will
be switched between AUTO, PAL, N3.58 and N4.43. You
can select a proper colour system.
9
AUTO
B/G
Press S-SYS button can select sound system. In this model,
the sound system is B/G and there is no need to adjust it.
When you press C-SYS or S-SYS button, the screen
displays as shown on the right.
You can also access the SYSTEM1 menu which is shown
on the right and adjust the COLOR SYS item and the
SOUND SYS item to set the colour system and the
sound system.
COLOR SYS
SOUND SYS
BACKGROUND
AUTO
B/G
ON
SEL
ADJ
16
2
4
Selecting the external Input Signal
1
2
Picture quality
Mode
MILD
Soft and moody picture
Standard picture
STANDARD
NATURE
COLOURFUL
CUSTOM
NATURE
CUSTOM
COLORFUL
MILD
Normal picture
Bright and dynamic picture
The picture quality you set
STANDARD
Item
CONTRAST
BRIGHT
COLOR
SHARPNESS
TINT
VOL-
weaker
darker
paler
softer
purplish
VOL+
stronger
lighter
deeper
sharper
greenish
TIME
14:03
--:--
--:--
--:--
---
OFF-TIME
ON-TIME
CH-TIME
PROGRAM
MSG-TIME
MESSAGE
--:--
SEL
ADJ
TIME
14:03
14:07
15:30
--:--
---
OFF-TIME
ON-TIME
CH-TIME
PROGRAM
MSG-TIME
MESSAGE
--:--
SEL
ADJ
TIME
14:03
14:07
15:30
--:--
---
OFF-TIME
ON-TIME
CH-TIME
PROGRAM
MSG-TIME
MESSAGE
--:--
SEL
ADJ
Operations
Clock Setting
Setting channel timer
Select CH-TIME item.
Set the CH-TIME. Press VOL- to set hour (0~23) Press VOL+
to set minute (0~59).
TIME
14:02
14:07
15:30
16:21
--:--
OFF-TIME
ON-TIME
CH-TIME
PROGRAM
MSG-TIME
MESSAGE
--:--
SEL
ADJ
Select PROGRAM item. Set the channel number by Digit or
VOL+/- buttons.
TIME
14:02
14:07
15:30
16:21
008
OFF-TIME
ON-TIME
CH-TIME
PROGRAM
MSG-TIME
MESSAGE
--:--
SEL
ADJ
The TV set will switch to the preset channel when the
CH-TIME elapses.
MESSAGE
Select MESSAGE item.
TIME
14:02
14:07
15:30
16:21
008
OFF-TIME
ON-TIME
CH-TIME
PROGRAM
MSG-TIME
MESSAGE
--:--
SEL
ADJ
MESSAGE
ABC
Press VOL+/- to access the MESSAGE interface. Press MENU
button to enter words and symbols. You can enter four lines at
most and each line is composed by 15 letters or symbols.
ABCDEFGHIJ
KLMNOPQRST
UVWZYX1234
56790.-_del
Press
button to save the message and press DSP button to
MENU:ENTER
MUTE:SAVE
DISP:QUIT
exit the interface.
If you want to set MESSAGE TIME, press CH+/- to select
MSG-TIME item. Press VOL+/- to set MESSAGE TIME.
TIME
OFF-TIME
ON-TIME
14:02
14:07
15:30
16:21
-----
Now the screen will display the message when you turn on the
unit (STANDBY to ON) or when the MESSAGE TIME elapses.
Press any buttons to exit the message. If you turn off the unit
by the main power switch on the unit, the message will be
eliminated.
CH-TIME
PROGRAM
MSG-TIME
MESSAGE
00:22
SEL
ADJ
20
Operations
System Setting
Background Setting
With the background function ON, when no signal is being
received, a preset background and customer's logo will appear.
COLOR SYS
SOUND SYS
BACKGROUND
AUTO
B/G
ON
Access the SYSTEM1 menu. Press CH+/- buttons to select
BACKGROUND item.
SEL
ADJ
Press VOL+/- buttons to select ON or OFF.
Colour/sound system setting
COLOR SYS
SOUND SYS
BACKGROUND
AUTO
B/G
ON
Press C-SYS or S-SYS button on the remote control
repeatedly to set colour system or sound system.
You can also access the SYSTEM1 menu. Press CH+/- to
select COLOR SYS item or SOUND SYS item.
SEL
ADJ
Press VOL+/- buttons to select colour system or sound
system.
COLOR SYS
SOUND SYS
BACKGROUND
AUTO
B/G
ON
SEL
ADJ
21
Operations
Other functions introduction
Game introduction
There is a built-in game (Falling cube) for you to play.
Press GAME button to access game interface.
MARK:0000
LEVEL:00
LINE:0000
2LINE:0000
3LINE:0000
On the screen, there are falling cubes. Pressing CH+ button can rotate the falling cube.
Pressing VOL+/- buttons can move the falling cube left or right while pressing CH- button can
hasten the falling speed of the cube.
When one row has been filled with the cubes, the row will disappear, and your mark will gain one
point. If two rows disappear at the same time, your mark will gain three points. If three rows disappear
at the same time, your mark will gain seven points.
The right window provides hints about next cube's shape, you can arrange current cube's position
and angle in advance.
When the cubes reach to top, the screen will display GAME OVER, and the game is finished.
MARK:0000
LEVEL:00
LINE:0000
2LINE:0000
GAME
OVER
3LINE:0000
To exit the game, press GAME button. If you want to restart the game when the game is finished,
you should exit the game firstly, then access and start the game again.
22
Operations
Other function introduction
Zoom setting
You can watch wide picture (such as 16:9) in V-ZOOM mode.
Access the SYSTEM2 menu. Press CH+/- buttons to select
ZOOM item.
Press VOL+/- buttons to select ON to active the V-ZOOM
mode. In the normal mode, it should be set to OFF.
ON
ON
ON
ZOOM
IMAGE ENHANCE
NR
CALENDAR
GAME
SEL
ADJ
Image Enhance setting
With built-in image enhance circuit you can use the function to
improve the visibility of details near black.
Access the SYSTEM2 menu. Press CH+/- buttons to select
IMAGE ENHANCE item.
ON
ON
ON
ZOOM
IMAGE ENHANCE
NR
CALENDAR
GAME
Press VOL+/- buttons to select ON, the image enhance is
available.
SEL
ADJ
Noise Reduction setting
ON
ON
ON
ZOOM
IMAGE ENHANCE
NR
CALENDAR
GAME
If the signal being received is weak and the picture is blurry,
active this function to improve the picture quality.
Access the SYSTEM2 menu. Press CH+/- buttons to select
NR item.
SEL
ADJ
Press VOL+/- buttons to select ON.
Calendar
ON
ON
ON
ZOOM
IMAGE ENHANCE
NR
CALENDAR
GAME
Access the SYSTEM2 menu. Press CH+/- buttons to select
CALENDAR item.
Press VOL+/- buttons to access calendar interface.
SEL
ADJ
Press CH+/- buttons to change the year. Press VOL+/- buttons
to change the month.
The calendar is from 1990 to 2089.
10-2002
SU MO TU WE TH FR SA
3
5
4
1
8
2
9
10
17
26
31
12
19
26
11
18
25
6
7
15 16
22 23
29 30
13 14
20 21
27 28
23
Operations
Other functions introduction
Setting music TV function
If you only want to listen to the music, you can press MUSIC
button and the screen displays MUSIC TV. Five seconds later, the
screen is blank while the sound is normal. Press any button on the
remote control to exit MUSIC mode.
MUSIC TV
Program Scanning
Press SCAN button to scan the program from current channel to
higher channel one by one. Every program will be scanned. During
the process, the channel number is displayed on the screen. Each
program will be displayed for about 2 seconds.
14
AUTO
B/G
Press SCAN button to stop the process, and the will display
the current channel.
SCAN
Sleep timer
Press SLEEP button repeatedly to set sleep time from 15
minutes to 120 minutes.
When the sleep time elapses, the TV set goes to STANDBY
mode automatically.
90
If you want to cancel Sleep timer, press and hold SLEEP button
--
until the screen displays the icon
.
--
Child lock
Press and hold MUSIC button until the screen displays a lock
icon. Now the TV set is in Child lock state. The screen is blue
and most of the buttons are useless.
If you want to resume, press and hold MUSIC button again until
the lock icon disappears.
24
Troubleshooting Guide
Before calling service personnel, please check the following chart for a possible
cause to the trouble you are experiencing.
Symptoms
Check the following items
Be sure the power cord is plugged in.
Power is not turned on.
Poor colour, poor tint.
Contrast, colour, tint are not correctly adjusted.
Possible interferences of automobiles, motorcycle,
trolley bus, neon lamps, etc.
Spots appear on the screen.
Possible interference of electronic interference
from another TV set, a computer, an electronics
game machine, a broadcast station, etc.
Stripes appear on the screen.
Double images or "ghosts".
Snowy picture.
This may be caused by reflections from nearby
mountains or buildings.
Check the antenna direction.
It is possible that the aerial "lead-in" is damaged or
comes off.
Check the antenna direction.
The batteries may be worn out.
The batteries may be installed with their polarity
reversed.
Remote controller does
not work.
Even if the picture or the sound is normal, changes
in room temperature sometimes makes the TV
cabinet expand or contract, making a noise. This
does not indicate a malfunction.
TV cabinet creaks.
When the set is switched on, do not shift or move
the set around. Sometimes it may develop an
unevenness in colour in some parts of the screen.
This can be eliminated by switching off the set with
the POWER switch and wait for 10 minutes before
switching on again.
Unevenness in colour in
some parts of the screen.
No picture and most of the
buttons are useless.
It is possible that the TV set is in child lock mode.
It is possible that the TV set is in music TV mode.
Black screen but the sound
is normal.
AV playback interference.
It is possible that both of the DVD and S-Video
terminals are connected.
25
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
604-TS21813-01
Ver 1.0
|