NEC 50XC10 User Manual
User’s Manual  
PlasmaSync 42XC10  
PlasmaSync 50XC10  
PlasmaSync 60XC10  
Table of Contents  
Important Safety Instructions..............................................................................................................English-1  
Important Information ...........................................................................................................................English-2  
Safety Precautions and Maintenance...................................................................................................English-3  
Recommended Use....................................................................................................................................English-4  
Installation  
Optional Stands/Mounts..........................................................................................................English-6  
Mounting Location....................................................................................................................English-6  
Mounting on Ceiling..................................................................................................................English-7  
Maintenance, Orientation, Cable Management ..................................................................English-7  
Using the Remote......................................................................................................................English-8  
Part Names and Functions  
Control Panel..............................................................................................................................English-9  
Terminal Panel............................................................................................................................English-10  
Remote Control..........................................................................................................................English-11  
Power, Display, Digital Zoom, Pointer, Main Power Switch Cover.....................................English-12  
Remote Control ID.....................................................................................................................English-13  
On-Screen Display(OSD)  
Using the OSD.............................................................................................................................English-14  
OSD................................................................................................................................................English-15  
Operation  
Picture Size Using Video Signals............................................................................................English-18  
Picture Size Using Computer Signals....................................................................................English-19  
Split Screen Mode .....................................................................................................................English-20  
Picture-in-Picture Mode .........................................................................................................English-21  
RS-232C .......................................................................................................................................................English-23  
Troubleshooting.........................................................................................................................................English-27  
Specifications  
42XC10..........................................................................................................................................English-28  
50XC10 .........................................................................................................................................English-29  
60XC10 .........................................................................................................................................English-30  
Supported Resolutions  
42XC10..........................................................................................................................................English-31  
50XC10 .........................................................................................................................................English-33  
60XC10 .........................................................................................................................................English-35  
Pin Assignment..........................................................................................................................................English-37  
Important Safety Instructions  
16. Damage Requiring Service -e appliance should be  
Read Before Operating Equipment.  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
serviced by qualified service personnel when:  
A. e power supply cord or the plug has been damaged;  
or  
B. Objects have fallen, or liquid has been spilled into  
the appliance;  
or  
C. e appliance has been exposed to rain;  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
or  
7. Do not block any of the ventilation openings. Install in  
D. e appliance does not appear to operate normally or  
accordance with the manufacturer's instructions.  
exhibits a marked change in performance;  
8. Do not install near any heat sources such as radiators,  
heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug  
has two blades and third grounding prong e wide  
blade or third prong are provided for your safety. If the  
provided plug does not fit into your outlet, consult an  
electrician for replacement of the obsolete outlet.  
or  
E. e appliance has been dropped, or the enclosure  
damaged.  
17. Tilt/Stability - All monitors must comply with  
recommended international global safety standards for  
tilt and stability properties of its cabinet design.  
Do not compromise these design standards by applying  
excessive pull force to the front, or top, of the cabinet  
which could ultimately overturn the product.  
Also, do not endanger yourself, or children, by placing  
electronic equipment/toys on the top of the cabinet.  
Such items could unsuspectingly fall from the top of the  
set and cause product damage and/or personal injury.  
10. Protect the power cord from being walked on or  
pinched particularly at plugs, convenience receptacles,  
and the point where they exit from the apparatus.  
11. Only use attachments/accessories specified by the  
18. Wall/Ceiling Mounting - e appliance should be  
mounted to a wall/ceiling only as recommended by the  
manufacturer.  
manufacturer  
12. Use only with the cart, stand, tripod, bracket, or  
table specified by the manufacturer, or sold with the  
apparatus. When a cart is used, use caution when  
moving the cart or apparatus combination to avoid  
injury from tip-over.  
19. Power Lines - An outdoor antenna should be located  
away from power lines.  
20. Outdoor Antenna Grounding - If an outside antenna is  
connected to the receiver, be sure the antenna system  
is grounded so as to provide some protection against  
voltage surges and built up static charges.  
Section 810 of the National Electric code. ANSI/NFPA  
No.70-1984, provides information with respect to  
proper grounding of the mats and supporting structure,  
grounding of the lead-in wire to an antenna-discharge  
unit, size of grounding connectors, location of antenna  
discharge unit, connection to grounding electrodes and  
requirements for the grounding electrode.  
13. Unplug this apparatus during lightning storms or when  
unused for long periods of time  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as when the power-supply  
cord or plug is damaged, liquid has been spilled or  
objects have fallen into the apparatus, the apparatus  
has been exposed to rain or moisture, does not operate  
normally, or has been dropped  
21. Objects and Liquid Entry - Care should be taken so that  
objects do not fall and liquids are not spilled into the  
enclosure through openings.  
Apparatus shall not be exposed to dripping or splashing  
and no objects filled with liquids, such as vases, shall be  
placed on apparatus  
Additional Safety Information  
WARNING  
15. is product may contain lead. Disposal of these  
materials may be regulated due to environmental  
considerations.  
To reduce the risk of fire or electric shock, do not expose  
this apparatus to rain or moisture.  
For disposal or recycling information, please contact  
your local authorities or the Electronic Industries  
Alliance: www.eiae org.  
English-1  
Important Information  
WARNING  
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS  
UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS  
CAN BE FULLY INSERTED.  
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING  
TO QUALIFIED SERVICE PERSONNEL.  
CAUTION  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL  
SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD  
FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
is symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock.  
erefore, it is dangerous to make any kind of contact with any part inside this unit.  
is symbol alerts the user that important literature concerning the operation and maintenance of this unit has been  
included. erefore, it should be read carefully in order to avoid any problems.  
CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not  
supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the AC  
voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.  
European  
Continental  
Plug Type  
North America  
U.K.  
Chinese  
Japanese  
Plug Shape  
Country  
Voltage  
U.S.A./Canada  
120*  
EU (except U.K.)  
230  
U.K.  
230  
China  
220  
Japan  
100  
*When operating the PlasmaSync monitor with its AC 125-240V power supply, use a power supply cord that matches the power  
supply voltage of the AC power outlet being used.  
measures:  
Canadian Department of  
•
•
Reorient or relocate the receiving antenna.  
Increase the distance between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
Consult your dealer or an experienced radio/TV technician for help.  
Communications Compliance Statement  
DOC: is Class B digital apparatus meets all requirements of the Canadian  
Interference-Causing Equipment Regulations.  
•
•
FCC Information  
1. Use the attached specified cables with the P426Y3(P42XC10),  
P506Y4(P50XC10) or P606Y5(P60XC10) color monitor so as not to  
interfere with radio and television reception.  
If necessary, the user should contact the dealer or an experienced radio/  
television technician for additional suggestions. e user may find the  
following booklet, prepared by the Federal Communications Commission,  
helpful: “How to Identify and Resolve Radio-TV Interference Problems.” is  
booklet is available from the U.S. Government Printing Office, Washington,  
D.C., 20402, Stock No. 004-000-00345-4.  
(1) Please use the supplied power cord or equivalent to  
ensure FCC compliance.  
(2) Please use shielded video signal cable,  
15-pin mini D-SUB to 15-pin mini D-SUB  
with ferrite cores on both ends (not included).  
WARNING  
is product equipped with a three-wire grounding (earthed) plug - a plug  
that has a third (grounding) pin. is plug only fits a grounding-type power  
outlet. If you are unable to insert the plug into an outlet, contact a licensed  
electrician to replace the outlet with a properly grounded one. Do not defeat  
the safety purpose of the grounding plug.  
2. is equipment has been tested and found to comply with the limits  
for a Class B digital device, pursuant to part 15 of the FCC Rules. ese  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. is equipment generates, uses,  
and can radiate radio frequency energy, and, if not installed and used  
in accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged  
to try to correct the interference by one or more of the following  
English-2  
Safety Precautions and Maintenance  
• Unplug the power cord during electrical storms or when  
the unit will not be in use for a long period.  
• Do not use monitor in high temperature, humid, dusty,  
or oily areas.  
• Do not cover vent on monitor.  
• Clean plasma ventilation areas using a vacuum cleaner  
with a soſt brush nozzle attachment.  
Safety Precautions  
and Maintenance  
FOR OPTIMUM PERFORMANCE, PLEASE NOTE  
THE FOLLOWING WHEN SETTING UP AND  
USING THE MONITOR:  
e plasma display's panel is made up of fine picture  
elements (cells), of which more than 99.99 percent are active  
cells. Some cells may not produce light or remain constantly  
lit. For safe operation and to avoid damaging the unit, read  
carefully and observe the following instructions.  
• To ensure proper ventilation, cleaning the ventilation  
areas must be carried out monthly. More frequent  
cleaning may be necessary depending on the  
environment in which the plasma monitor is installed.  
• Allow adequate ventilation around the monitor so that  
heat can properly dissipate. Do not block ventilated  
openings or place the monitor near a radiator or other  
heat sources. Do not put anything on top of monitor.  
• Handle with care when transporting. Save packaging for  
transporting.  
• As is the case with any phosphor-based display (like a  
CRT monitor, for example) light output will gradually  
decrease over the life of a Plasma Display Panel.  
• To avoid sulfurization it is strongly recommended not to  
place the unit in a dressing room in a public bath or hot  
spring bath.  
• DO NOT OPEN THE MONITOR. ere are no user-  
serviceable parts inside and opening or removing covers  
may expose you to dangerous shock hazards or other  
risks. e manufacturer is not liable for any bodily harm  
or damage caused if unqualified persons attempt service  
or open the back cover. Refer all servicing to qualified  
service personnel.  
• Do not spill any liquids into the cabinet or use your  
monitor near water.  
• Do not insert objects of any kind into the cabinet slots,  
as they may touch dangerous voltage points, which can  
be harmful or fatal or may cause electric shock, fire or  
equipment failure.  
• Do not bend, crimp or otherwise damage the power cord.  
Do not place any heavy objects on the power cord.  
Damage to the cord may cause shock or fire.  
• Do not place this product on a sloping or unstable cart,  
stand or table, as the monitor may fall, causing serious  
damage to the monitor.  
CAUTION  
Immediately unplug your monitor from the wall outlet and  
refer servicing to qualified service personnel under the  
following conditions:  
• When the power supply cord or plug is damaged.  
• If liquid has been spilled on, or objects have fallen into  
the monitor.  
• If the monitor has been exposed to rain or water.  
• If the monitor has been dropped or the cabinet  
damaged.  
• Do not use in a moving vehicle, as the unit could drop or  
topple over and cause injuries.  
• e power cable connector is the primary means of  
detaching the system from the power supply. e  
monitor should be installed close to a power outlet that  
is easily accessible.  
• is equipment shall be connected to a MAIN outlet  
with a protective earth-ground connection. Do not place  
any objects onto the monitor and do not use the monitor  
outdoors.  
• If the monitor does not operate normally by following  
operating instructions.  
• Do not use this unit’s polarized plug with an extension  
cord or with outlets unless the prongs can be inserted  
fully.  
• e power supply cord you use must have been approved  
by and comply with the safety standards of your  
country. (Type H05VV-F 3G 1mm2 should be used in  
Europe)  
• In UK, use a BS-approved power cord with molded plug  
having a black (13A) fuse installed for use with this  
monitor.  
• Use only with 100 V to 240 V 50 Hz/60 Hz AC power  
supply. Continued operation at line voltages greater than  
100 V to 240 V AC will shorten the life of the unit, and  
might even cause a fire hazard.  
English-3  
Recommended Use  
CAUTION  
Cleaning the Panel  
• When the panel becomes dusty or dirty, wipe gently  
with soſt cloth.  
• Do not rub the panel with coarse material.  
• Do not apply pressure to the surface.  
CORRECT PLACEMENT AND ADJUSTMENT OF  
THE MONITOR CAN REDUCE EYE, SHOULDER AND  
NECK FATIGUE. CHECK THE FOLLOWING WHEN  
POSITIONING THE MONITOR:  
• Do not use OA cleaner. OA cleaner will cause  
deterioration or discolor the surface.  
• For optimum performance, allow 20 minutes for warm-  
up.  
• Rest your eyes periodically by focusing on an object at  
least 5 feet away. Blink oſten.  
• Position the monitor at a 90 degree angle to windows  
and other light sources to minimize glare and  
reflections.  
• Clean the monitor surface with a lint-free, nonabrasive  
cloth. Avoid using any cleaning solution or glass  
cleaner.  
• Adjust the monitor’s brightness and contrast controls to  
enhance readability.  
Cleaning the Cabinet  
• Unplug the power supply.  
• Gently wipe the cabinet with a soſt cloth.  
• To clean the cabinet, dampen the cloth with a neutral  
detergent and water, wipe the cabinet and follow with a  
dry cloth.  
NOTE: e surface of the cabinet is composed of many  
types of plastic.  
• Get regular eye checkups.  
DO NOT clean with benzene thinner, alkaline  
detergent, alcoholic system detergent, glass cleaner,  
wax, polish cleaner, soap powder, or insecticide.  
Rubber or vinyl should not be in contact with  
the cabinet for an extended period of time. ese  
types of fluids and materials can cause the paint to  
deteriorate, crack or peel.  
Ergonomics  
To realize the maximum ergonomic benefits, we recommend  
the following:  
• Use the preset Size and Position controls with standard  
signals.  
• Use the preset Color Setting.  
CLEANING THE VENT HOLES  
• Clean plasma ventilation areas using a vacuum cleaner  
with a soſt brush nozzle attachment.  
• Do not use primary color blue on a dark background, as  
it is difficult to see and may produce eye fatigue due to  
insufficient contrast.  
• is equipment is not for use at video display work  
station according to Bildscharb V.  
• To ensure proper ventilation, cleaning the ventilation  
areas must be carried out monthly. More frequent  
cleaning may be necessary depending on the  
For more detailed information on setting up a healthy work  
environment, refer to the following document:  
environment in which the plasma monitor is installed.  
American National Standard for Human Factors  
Engineering of Visual Display Terminal Workstations  
ANSI-HFS Standard No. 100-1988  
Published by:  
e Human Factors and Ergonomics Society  
P.O. Box 1369, Santa Monica, California 90406.  
English-4  
Recommended Use  
- continued  
To avoid or minimize image  
retention:  
OPERATING ENVIRONMENT  
Operating environment temperature and humidity: 0 °C to  
+40 °C (+32 °F to +104 °F); less than 80%RH (cooling vents  
not blocked) Do not install this unit in a poorly ventilated  
area, or in locations exposed to high humidity or direct  
sunlight (or strong artificial light)  
Like all phosphor-based display devices and all other gas  
plasma displays, plasma monitors can be susceptible to image  
retention under certain circumstances. Certain operating  
conditions, such as the continuous display of a static  
image over a prolonged period of time, can result in image  
retention if proper precautions are not taken. To protect  
your investment in this plasma monitor, please adhere to the  
following guidelines and recommendations for minimizing  
the occurrence of image retention:  
WARNING  
Not for use in a computer room as defined in the Standard  
for the Protection of Electronic Computer/Data Processing  
Equipment ANSI/NFPA 75.  
NOTE: Please use shielded video signal cable, 15-pin mini  
D-SUB to 15-pin mini D-SUB with ferrite cores on  
both ends (not included).  
• Always enable and use your computer’s screen saver  
function during use with a computer input source.  
• Display a moving image whenever possible.  
• Change the position of the menu display from time to  
time.  
• Always power down the monitor when you are finished  
using it.  
To reduce the likelihood of  
image retention from long-term  
use:  
• Lower the Brightness and Contrast levels as much as  
possible without impairing image readability.  
• Display an image with many colors and color gradations  
(i.e. photographic or photo-realistic images).  
• Create image content with minimal contrast between  
light and dark areas. Use complementary or pastel colors  
whenever possible.  
• Avoid displaying images with few colors and distinct,  
sharply defined borders between colors.  
Plasma monitor driving sound  
• e panel of the Plasma monitor is composed of  
extremely fine pixels and these pixels emit light  
according to received video signals. is principle may  
cause you to hear a buzz or electrical hum coming from  
the Plasma monitor. Also note that the rotation speed  
of the cooling fan motor increases when the ambient  
temperature of the Plasma monitor becomes high. You  
may hear the sound of the motor at that time.  
NOTE: e following items are not covered by the  
warranty.  
• Image retention  
• Panel generated sound. Examples: Fan motor  
and electrical noises circuit humming /glass panel  
buzzing.  
English-5  
Installation  
• Allow adequate ventilation or provide air conditioning  
around the monitor, so that heat can properly dissipate  
away from the unit and mounting apparatus.  
Using Optional Stand/Mounts  
An optional stand or mounting apparatus can be installed  
either while the unit is in the upright position or while the  
unit is face-down.  
Figure 1  
To install the stand while in the upright position, lower the  
monitor onto to the feet as shown (Figure 1). Use the handles  
to support the display while lowering the support holes  
underneath the display onto the feet.  
If stand or mounting apparatus is to be installed while the  
unit is face-down (Figure 2), be sure to lay the protective  
sheet (the foam sheet that the unit was wrapped in)  
underneath the unit on order to prevent damage to the  
screen.  
is unit must be used with a stand or some type of  
mounting apparatus. is unit is not designed for use  
without additional support.  
• For correct Installation and Mounting it is  
recommended to use a trained, authorized dealer.  
• Failure to follow correct mounting procedures could  
result in dame to the unit or to the installer.  
Protective Sheet  
• Product warranty does not cover damage caused by  
improper installation.  
Figure 2  
CAUTION:  
• To install, follow those instructions included with the  
stand or mounting apparatus. Use only those devices  
recommended by the manufacturer.  
Table  
• Make sure to install stand or mounting apparatus to the  
unit while on a surface that is strong and stable enough  
to support the weight of the unit, such as a floor or  
sturdy table.  
• Use the specified clasps for installation.  
• Take necessary steps to prevent the unit from tipping or  
falling.  
Mounting Location  
e ceiling and wall must be strong enough to support the  
monitor and mounting accessories.  
Figure 3  
• DO NOT install in locations where a door or gate can hit  
the unit.  
50mm (2")  
• DO NOT install in areas where the unit will be subjected  
to strong vibrations and dust.  
• DO NOT install near where the main power supply  
enters the building.  
• DO NOT install in where people can easily grab and  
hang onto the unit or the mounting apparatus.  
50mm (2")  
• When mounting in an enclosure or in a recessed area, as  
in a wall, leave at least 2 inches (50mm) of space between  
the monitor and the wall for proper ventilation (Figure 3).  
English-6  
Installation  
- continued  
Mounting on Ceiling  
Cable Management  
To conveniently manage cables, use the cable clamps  
provided to bundle the power cord together with the signal  
and audio cables at the back of the display.  
• Ensure that the ceiling is sturdy enough to support the  
weight of the unit and the mounting apparatus over  
time, against earthquakes, unexpected vibrations, and  
other external forces.  
To attach cable clamps:  
• Be sure the unit is mounted to a solid structure within  
the ceiling, such as a support beam. Secure the monitor  
using bolts, spring lock washers, washer and nut.  
• DO NOT mount to areas that have no supporting  
internal structure. DO NOT use wood screws or anchor  
screws for mounting. DO NOT mount the unit to trim  
or to hanging fixtures.  
1. Attach the cable clamps to the display. Insert the anchor  
of the clamp into the hole on the back of the display.  
ere are 4 cable clamps and 4 clamp holes on the unit.  
2. Aſter the cable clamp is positioned on the display, wrap  
the end around the cables. Place the end of the clamp  
into the slot near the anchor. Pull until cables are snug.  
Clamps are designed to stay in place. Once in position,  
they will be difficult to remove.  
Maintenance  
3. Cables can be routed to the right or leſt of the clamp.  
Use the beaded bands to secure the cables together along  
their length. Make sure the cables are fully supported.  
• Periodically check for loose screws, gaps, distortions,  
or other problems that may occur with the mounting  
apparatus. If a problem is detected, please refer to  
qualified personnel for service.  
To detach clamps:  
• Regularly check the mounting location for signs of  
damage or weakness that may occur over time.  
Using pliers, twist the clamp 90 degrees and pull  
outward. It is possible that the clamp can weaken over  
time and removing it may cause damage to the clamp.  
Please note the following when  
mounting on wall or ceiling.  
• When using mounting accessories other than those that  
are NEC approved, they must comply with the VESA-  
compatible (FDMlv1) mounting method.  
Anchor  
Slot  
• NEC strongly recommends  
using size M8 screws  
Mounting  
Bracket  
Unit  
Holes for Clamp  
anchors  
(16mm + thickness of  
bracket in length). If using  
screws longer than 16mm,  
check the depth of the  
hole.(Recommended Fasten  
Force: 1125 - 1375N•cm)  
NEC recommends mounting  
interfaces that comply with  
UL1678 standard in North  
America.  
Screw  
16mm  
Thickness  
of Bracket  
Screw length should equal  
depth of hole (16mm) + the  
thickness of mounting bracket.  
Closed Clamp  
Orientation  
DO NOT use this monitor in the  
portrait position. Doing so may cause  
failure and void the warranty.  
English-7  
Installation  
Using the Remote:  
- continued  
Operating Range for the Remote Control  
Point the top of the remote control toward the monitor’s  
remote sensor while pressing buttons. e remote control  
can be used from the front of the monitor at a maximum  
distance of 7 m/23 ſt. from the front of the Plasma monitor’s  
remote control sensor. e maximum horizontal and vertical  
angle for use of the remote is 30 degree within a distance of  
3.5 m/11.5 ſt.  
Install the remote control batteries.  
e remote control is powered by AA batteries. To install or  
replace batteries:  
CAUTION  
e remote control may not function when direct sunlight  
or strong illumination strikes the remote control sensor of  
the Plasma monitor, or when there is an object in the path of  
the sensor.  
A. Press and slide to open the cover.  
B. Align the batteries according to the (+)  
and (–) indications inside the case.  
C. Replace the cover.  
Handling the Remote Control  
Do not open the remote control other than to install  
batteries. Do not allow water or other liquid to splash onto  
the remote control. If the remote control gets wet, wipe it dry  
immediately.  
CAUTION: Incorrect usage of batteries can result in leaks or  
bursting. NEC recommends the following battery use:  
• Place “AA” size batteries matching the (+) and (-) signs  
on each battery to the (+) and (-) signs of the battery  
compartment.  
Avoid exposure to heat and steam.  
• Do not mix battery brands.  
NOTE: If you do not intend to use the Remote Control for a  
long period of time, remove the batteries.  
• Do not combine new and old batteries, or mix brands.  
is can shorten battery life or cause liquid leakage of  
batteries.  
• Remove dead batteries immediately to prevent battery  
acid from leaking into the battery compartment.  
• Do not touch exposed battery acid, it may injure skin.  
• Do not drop or mishandle the remote.  
• Do not get the remote control wet. If the remote does get  
wet, wipe dry immediately.  
• Avoid excessive heat and humidity.  
• Do not dispose of batteries in fire.  
30  
30  
• Please follow government regulations or public  
environmental rules that apply in your country/area  
when disposing of used batteries.  
• When replacing, use only conventional non-  
rechargeable alkaline or manganese batteries.  
• ere is a risk of explosion if batteries are replaced  
incorrectly.  
English-8  
Part Names and Functions  
Control Panel  
9
ON  
OFF  
10  
8
1
7
2
3
6
5
4
1) POWER  
8) EXIT  
Switches the power on/standby.  
Activates the OSD menu when the OSD menu is off.  
Exits from the current menu being displayed to the  
previous menu within the OSD.  
2) MUTE  
Switches the audio mute ON/OFF.  
9) Remote control sensor and Power indicator  
Receives the signal when using the wireless remote control.  
Glows green when the monitor is active. Glows red when  
the monitor is in Standby mode. Glows Amber when the  
monitor is in POWER SAVE mode.  
3) INPUT  
Switches between input sources.  
Acts as SET button within the OSD menu.  
4) PLUS (+)  
Increases the setting adjustment within OSD menu.  
A red blinking Power indicator means that the monitor has  
detected a failure. Contact qualified personnel in case of  
failure.  
5) MINUS (-)  
Decreases the setting adjustment within OSD menu.  
10) Main Power Switch  
6) UP (  
)
Seesaw switch to turn the main power on/off.  
Increases the volume level when the OSD is off.  
Moves area up to select which setting to is to be adjusted  
within OSD menu.  
Mode  
Power On  
Status indicator light  
Green  
7) DOWN (  
)
Standby  
Red  
Decreases the volume level when the OSD is off.  
Moves down to select which setting is to be adjusted within  
OSD menu.  
Power save  
Amber  
Diagnosis  
Red blinking  
(Detecting failure)  
NOTE:  
The POWER button does not completely turn off the  
display. Use the Main Power Switch to completely turn off  
the display.  
English-9  
Part Names and Functions  
Terminal Panel  
9
1
12  
DVD/HD2  
OUT  
R
R
R
IN  
R
L
IN  
(MONO)  
L
(MONO)  
(MONO)  
L
L
S-VIDEO IN  
VIDEO  
Y
Cr/Pr Cb/Pb  
DVD/HD1  
SPEAKER (S)  
EXTERNAL CNTROL  
DVD/HD3  
DVI  
AUDIO3  
VGA  
AUDIO2  
AUDIO1  
AC IN  
2
11  
3
4
5
6
7
8
10  
13  
14  
1) EXTERNAL CONTROL OUT (D-Sub 9 pin)  
8) DVD/HD1  
Connect RS-232C output to a second monitor.  
Connect equipment such as a DVD player, HDTV device,  
or set-top box.  
2) EXTERNAL CONTROL (D-Sub 9 pin)  
Connect RS-232C input to external equipment such as a  
PC in order to control RS-232C functions.  
9) DVD/HD2  
Connect equipment such as a DVD player, HDTV device  
or set-top.  
3) DVD/HD3 (HDMI)  
Input digital HDMI signals.  
10) AUDIO1  
Input the audio signal from external equipment such as a  
computer, VCR or DVD player.  
4) DVI  
Input digital RGB signals from a computer or HDTV  
device having a digital RGB output.  
11) S-VIDEO in  
Input S-video.  
5) AUDIO3  
Input the audio signal from external equipment such as a  
computer, VCR or DVD player.  
12) VIDEO1  
Composite video input.  
6) VGA (Mini D-Sub 15 pin)  
13) EXTERNAL SPEAKER (L and R) connector  
Connects to optional speakers. Output the audio signal  
from AUDIO 1, 2, and 3 to external speakers.  
NOTE: Speaker Terminal is for 8W + 8W (8 ohm).  
Analog computer input.  
7) AUDIO2  
Input the audio signal from external equipment such as a  
computer, VCR or DVD player.  
14) AC IN  
Connects with the supplied power cord.  
Information:  
For SCART connections there are 2 ways to connect:  
SCART1: Connect R/G/B to the DVD/HD1 terminals and  
composite sync. to the VIDEO1 terminal.  
SCART2: Connect R/G/B + composite sync. to the VGA  
terminal.  
English-10  
Part Names and Functions  
- continued  
6) SIZE  
Remote Control Functions  
Set the aspect ratio of the image.  
7) KEYPAD  
Set REMOTE ID.  
POWER ON  
STANDBY  
1
2
3
8) DISPLAY  
PICTURE  
MEMORY  
RGB  
DVD/HD  
SIZE  
VIDEO  
22  
Turn on/off the Information OSD.  
4
PICTURE  
MODE  
5
9)  
6
Move selection up or down  
1
4
7
2
5
8
0
3
6
9
10) AUTO SETUP  
Adjusts the CLOCK PHASE, CLOCK, and POSITION  
settings automatically. (Analog RGB signal input only)  
7
8
11) POINTER  
Turn on/off the pointer.  
DISPLAY  
MENU  
15  
12) VOLUME  
Increases/Decreases sound level.  
16  
17  
9
SET  
+
AUTO  
SET UP  
EXIT  
13) SPLIT SCREEN  
10  
11  
18  
19  
PIP: Picture-in-Picture mode.  
VOL  
ZOOM  
POINTER  
S BY S: Side-by-side mode.  
+
+
SINGLE: Returns to normal mode.  
SWAP: Swaps the Split Screen images.  
SELECT/FREEZE: Selects which input is active when  
in split screen mode.  
MUTE  
S BY S  
12  
20  
21  
SPLIT SCREEN  
PIP  
SINGLE  
CAPTURE  
SLEEP  
13  
SELECT/FREEZE  
SWAP  
When the PICTURE FREEZE function (see OSD  
FUNCTION) is operating, SELECT/FREEZE can be  
used to display still pictures on the sub screen.  
REMOTE ID  
SET  
RESET  
14  
REMOTE CONTROLLER RU-M113  
CAPTURE : Captures still picture.  
14) REMOTE ID  
Activates REMOTE ID function.  
1) POWER ON/STANDBY  
15) MENU  
Turns ON/OFF menu mode.  
Switches the power on/standby.  
*If the Power Indicator on the display is not glowing,  
then no controls will work.  
16) SET  
Makes selection.  
2) VIDEO  
Switches the input signal to the VIDEO source.  
17) - , +  
Increases or decreases amount of adjustment.  
3) RGB  
Switches the input signal to the RGB source.  
18) EXIT  
Goes to the previous menu.  
4) DVD/HD  
Switches the input signal to the DVD/HD source.  
19) ZOOM  
Enlarges or reduces the picture.  
5) PICTURE MODE  
Selects Picture Mode: [STANDARD], [BRIGHT],  
[CINEMA1], [CINEMA2], [DEFAULT].  
STANDARD: for viewing in a bright room  
BRIGHT: brighter picture than STANDARD  
CINEMA1, 2: for viewing in a dark room, good for  
movies  
20) MUTE  
Mutes audio output.  
21) SLEEP  
Sleep timer.  
22) PICTURE MEMORY  
DEFAULT: factory default settings  
Switches memory settings from 1 to 6.  
English-11  
Part Names and Functions  
POWER  
- continued  
Main Power Switch Cover  
Included with the display is a cover for the Main Power  
Switch. Use this cover to prevent the unit from being  
inadvertently powered off.  
To turn the unit ON and OFF:  
1. Plug the power cord into an AC outlet.  
Place the tab on the cable cover into the rectangular slot on  
the display.  
2. Press the Power button (on the unit).  
e monitor's ON/STANDBY indicator turns red and  
the unit will be in STANDBY mode.  
en using the screw provided, secure the cover to the  
display.  
3. Press the POWER ON button on the remote control. e  
ON/STANDBY indicator will turn green when the unit  
is active.  
4. Press the STANDBY button (on the remote) or the  
Power button (on the unit) to turn off the monitor.  
DISPLAY  
To check display settings press the DISPLAY button on the  
remote. e screen changes each time the DISPLAY button is  
pressed. Display information will disappear aſter 3 seconds.  
ON  
OFF  
DIGITAL ZOOM  
SLOT  
Digital zoom can change the picture position or enlarge the  
image on the screen.  
TAB  
1. Be sure ZOOM NAV function is off. Press the ZOOM  
button (+ or -) to display the magnifying glass.  
Press the ZOOM + button to enlarge the image.  
Press the ZOOM - button to reduce the image.  
Press the UP and DOWN or PLUS and MINUS buttons  
to reposition the picture.  
Main Power  
Switch  
2. Press the POINTER button to hide the pointer.  
Cover  
POINTER  
Use the Pointer to point to a specific area on the screen.  
Press the UP and DOWN or PLUS and MINUS buttons to  
reposition the Pointer.  
English-12  
Part Names and Functions  
- continued  
Remote Control ID Function  
REMOTE CONTROL ID  
e remote control included with the display can be used  
to control up to 26 individual monitors using what is  
called the REMOTE CONTROL ID mode. e REMOTE  
CONTROL ID mode works in conjunction with the Monitor  
ID, allowing control of up to 26 individual monitors. For  
example: if there are many monitors being used in the same  
area, a remote control in normal mode would send signals to  
every monitor at the same time Figure 1. Using the remote  
in REMOTE CONTROL ID mode will only operate one  
specific monitor within the group Figure 2.  
Monitor ID:1  
Monitor ID:2  
Monitor ID:3  
Remote works  
Remote works  
Remote works  
TO SET REMOTE CONTROL ID:  
Figure 1  
Remote in Normal  
mode or the REMOTE  
ID is set to 0  
While holding down the REMOTE ID SET button on the  
remote control, use the KEYPAD to input the Monitor ID  
(1-26) of the display to be controlled via remote. e remote  
can then be used to operate the monitor having that specific  
Monitor ID number.  
When 0 is selected or when the remote control is in normal  
mode, all monitors will be operated.  
Monitor ID:3  
Monitor ID:1  
Monitor ID:2  
TO USE REMOTE CONTROL ID MODE  
ID Mode - To enter ID Mode press the REMOTE ID SET  
button and hold down for 2 seconds.  
Remote works  
Remote does  
not work  
Remote does  
not work  
Normal Mode - To return to Normal Mode press the  
REMOTE ID RESET button and hold down for 2 seconds.  
In order for this feature to work properly, the display must be  
assigned a Monitor ID number. e Monitor ID number can  
be assigned under the SETUP menu in the OSD (See page  
17).  
Figure 2  
Remote set up to  
use Remote ID:3  
If Monitor ID is set to “ALL” , monitor is controled by remote  
control not depend on remote ID.  
English-13  
On-Screen Display (OSD)  
4. Change the setting or adjustment by pressing the + and  
- buttons on the Control Panel or the Remote Control.  
Using the OSD  
Use the Remote Control or the control panel on the front  
of the unit to enter the on-screen display menu to adjust  
settings.  
5. Press the EXIT button on the Remote Control, on the  
Control Panel to return to the previous menu.  
1. Press the MENU button on the remote or the EXIT  
button on the Control Panel.  
NOTE: Not all menu functions may be available. To access  
all functions the Advanced OSD option must be  
turned on in the ADVANCED OSD menu.  
2. Use the up and down buttons to select the desired menu.  
3. Press the SET button to select a sub-menu or item for  
adjustment.  
Press UP or DOWN  
button to select  
sub-menu.  
Press SET.  
Press UP, DOWN, PLUS,  
or MINUS to select the  
function or setting to be  
adjusted.  
Press MENU or EXIT.  
Remote  
Control  
Press UP or DOWN  
button to select.  
Press INPUT  
button to decide.  
Press UP, DOWN, PLUS,  
or MINUS to select.  
Press EXIT.  
Control  
Panel  
OSD Screen  
VGA  
VGA  
FUNC.  
FUNC.  
FUNCTION  
SCREEN  
FUNCTION  
SCREEN  
SET UP  
INFO  
SET UP  
INFO  
PICTURE  
PICTURE  
OFF  
OFF  
PICTURE MEMORY  
CONTRAST  
BRIGHTNESS  
SHARPNESS  
COLOR  
PICTURE MEMORY  
CONTRAST  
BRIGHTNESS  
SHARPNESS  
COLOR  
TINT  
NR  
COLOR TEMP.  
FILM MODE  
PICTURE MODE  
TINT  
NR  
OFF  
HIGH  
ON  
OFF  
HIGH  
ON  
STANDARD  
2.2  
0%  
COLOR TEMP.  
FILM MODE  
PICTURE MODE  
GAMMA  
SET UP LEVEL  
COLOR CONTROL  
STANDARD  
4&-ꢀ  
.&/6ꢁ4&-ꢀ  
$-04&  
4&-ꢀ  
.&/6ꢁ4&-ꢀ  
$-04&  
ADVANCED OSD is OFF. Not all OSD functions will be  
available when the ADVANCED OSD is off.  
Advanced OSD is ON. All OSD functions are shown, but  
some OSD functions may not be available.  
English-14  
On-Screen Display (OSD)  
Main Menu  
PICTURE  
Sub Menu  
Sub Menu2  
Explanation  
Default  
Reset  
PICTURE MEMORY  
Store picture menu settings and input terminal information. The  
memory number is 1-6.  
OFF  
YES  
The "PICTURE MEMORY" screen appears when the SET button is  
pressed on the "PICTURE MEMORY" MENU.  
CONTRAST  
Adjusts the image brightness in relationship to the white level.  
Press + or - to adjust.  
50  
50  
YES  
YES  
BRIGHTNESS  
Adjusts the image brightness in relationship to the background.  
Press + or - to adjust.  
SHARPNESS  
COLOR  
Adjusts the crispness of the image. Press + or - to adjust.  
Adjusts the color depth of the screen. Press + or - to adjust.  
Adjusts the tint of the screen. Press + or - to adjust.  
50  
50  
YES  
YES  
YES  
YES  
YES  
TINT  
50  
NR  
Adjusts the amount of noise reduction. Press + or - to adjust.  
OFF  
MIDDLE  
COLOR TEMP.  
Adjusts the color temperature of the entire screen. A low  
color temperature will make the screen reddish. A high color  
temperature will make the screen bluish.  
WHITE BALANCE.  
GAIN RED  
GAIN GREEN  
GAIN BLUE  
RESET  
The "WHITE BALANCE" appears when the SET button is pressed  
on the "COLOR TEMP." OSD menu.  
GAIN RED/GREEN/BLUE: Adjusts the white level of the white  
balance.  
50  
50  
YES  
YES  
YES  
YES  
50  
Resets the factory default settings. Select "ON", then press the  
SET button to reset.  
OFF  
FILM MODE  
Selects Film mode.  
ON  
YES  
YES  
PICTURE MODE  
Selects picture mode, [BRIGHT], [STANDARD], [CINEMA1],  
[CINEMA2], [DEFAULT].  
STANDARD  
STANDARD: For watching in a bright room.  
CINEMA1, 2: For watching in a dark room, especially good for  
movies.  
BRIGHT: Brighter picture than STANDARD.  
DEFAULT: Restores factory default settings.  
GAMMA  
Select a display gamma for best picture quality.  
2.1, 2.2, 2.3, 2.4: The picture becomes darker as the number  
increases.  
S: Special gamma for certain types of movies. Raises the dark  
parts and lowers the light parts of the image. (S-Curve)  
These values are approximate.  
2.2  
0%  
YES  
YES  
Available only when  
the Advanced OSD  
function in the  
FUNCTION menu is  
enabled.  
SET UP LEVEL  
Available only when  
the Advanced OSD  
function in the  
Adjusts the video black level.  
VIDEO signal input only.  
FUNCTION menu is  
enabled.  
COLOR CONTROL  
Available only when  
the Advanced OSD  
function in the  
FUNCTION menu is  
enabled.  
RED  
Adjusts the levels of the Red, Green, Blue, Yellow, Magenta and  
Cyan.  
VIDEO and DVD/HD 1/2 input only.  
50  
50  
50  
YES  
YES  
YES  
GREEN  
BLUE  
YELLOW  
MAGENTA  
CYAN  
50  
50  
YES  
YES  
YES  
YES  
50  
RESET  
Resets the factory default settings. Select "ON", then press the  
SET button to reset.  
OFF  
English-15  
On-Screen Display (OSD)  
Main Menu  
Sub Menu  
Sub Menu2  
Explanation  
Default  
Reset  
YES  
YES  
YES  
YES  
YES  
YES  
YES  
-
AUDIO  
BASS  
Adjusts the low frequency sound. Press + or - to adjust.  
Adjusts the high frequency sound. Press + or - to adjust.  
Adjusts the balance of L/R volume. Press + or - to adjust.  
Select which audio input to use with the video source.  
0
TREBLE  
0
BALANCE  
0
VIDEO1  
DVD/HD1  
VGA  
AUDIO INPUT1  
AUDIO INPUT2  
AUDIO INPUT3  
DVD/HD3 INPUT  
ASPECT MODE  
V-POSITION  
HDMI  
-
SCREEN  
Selects aspect ratio of the displayed image. Press + or - to select.  
Controls the vertical position of the image within the Display area  
of the PDP.  
0
YES  
Press + to move up. Press - to move down.  
H-POSITION  
Controls the horizontal position of the image within the Display  
area of the PDP.  
0
YES  
Press + to move right. Press - to move left.  
V-HEIGHT  
Adjusts the vertical size of the image.  
Adjusts the horizontal size of the image.  
0
0
YES  
YES  
NO  
H-WIDTH  
AUTO PICTURE  
ON: H-Position, V-Position, Clock and Clock Phase are adjusted  
OFF  
automatically.  
OFF: H-Position, V-Position, Clock and Clock Phase are adjusted  
manually.  
VGA input only.  
CLOCK PHASE  
CLOCK  
Adjusts the visual “noise” on the image.  
VGA input only.  
0
0
YES  
YES  
Press + to expand the width of the image on the right of the  
screen.  
Press - to narrow the width of the image on the left.  
VGA input only.  
UNDER SCAN  
ON: UNDERSCAN is selectable in the ASPECT MODE menu.  
OFF: UNDERSCAN item is not selectable in the ASPECT MODE  
menu.  
OFF  
YES  
Available only when  
the Advanced OSD  
function in the  
Video signal input only.  
FUNCTION menu is  
enabled.  
SET UP  
LANGUAGE  
Select the language used by the OSD.  
ENGLISH  
NO  
Some functions  
available only  
when the  
Advanced OSD  
function in the  
FUNCTION  
menu is  
DVD/HD1 INPUT  
Selects whether to set the input of the DVD/HD1 connector.  
COMPONENT : for Component input. (3BNC connectors)  
SCART1 : for SCART input (3RCA connectors and VIDEO1 input)  
(SCART1 available for Europe and World-Wide models only)  
COMPONENT  
YES  
D-SUB INPUT  
Selects whether to set the input of the mini D-SUB connector.  
RGB : for RGB input  
SCART2 : for SCART input  
RGB  
YES  
enabled.  
(SCART2 available for Europe and World-Wide models only)  
The  
HD SELECT  
Selects signal detection for similar 1080I signal manually.  
1080I : Standard digital broadcasts  
540P : Special digital broadcasts ( ex. DTC100 )  
1080I  
AUTO  
NO  
LANGUAGE  
and ALL  
RESET  
functions  
are always  
available.  
RGB SELECT  
If there is a problem with signal detection, this function forces the  
monitor to display the signal at the desired resolution.  
If no problem is detected, the only available option will be “AUTO”.  
VGA input only.  
YES  
HDMI MODE  
DVI MODE  
Choose the HDMI mode based on the input device connected via  
HDMI connector.  
When a DVD player or similar equipment is connected, sets to  
"HIGH".  
HIGH  
NO  
When a PC or similar equipment is connected, sets to "LOW".  
PLUG/PLAY  
Choose the DVI mode based on the input device connected via  
DVI connector and set the black level.  
When a PC or similar equipment is connected, PLUG/PLAY is  
"DVI-PC" and BLACK LEVEL is "LOW".  
When a DVD player or similar equipment is connected, PLUG/  
PLAY is "DVI-HD" and BLACK LEVEL is "HIGH".  
DVI-PC  
LOW  
NO  
NO  
NO  
BLACK LEVEL  
COLOR SYSTEM  
The selected Color System depends on the video format of the  
AUTO  
input signal.  
VIDEO input only.  
English-16  
On-Screen Display (OSD)  
Main Menu  
Sub Menu  
Sub Menu2  
Explanation  
Default  
Reset  
SET UP  
(continued)  
BACK GROUND  
Chooses the brightness of background when there is no input  
signal present.  
GRAY  
YES  
SIDE MASK  
OSD  
Adjusts the color of the side mask when a 4:3 image is displayed.  
Press + button, the bar will become lighter.  
Press - button, the bar will become darker.  
3
YES  
DISPLAY OSD ON: Information about inputs, screen size, etc. is shown.  
OFF: No information is shown.  
ON  
TOP LEFT  
ON  
YES  
YES  
YES  
OSD  
POSITION  
Change the position of the menu between TOP LEFT and BTM  
RIGHT. Press + or - to adjust.  
OSD ORBITER ON: The menu position intermittently shifts eight dots while the  
OSD is being displayed.  
OFF: The menu position does not shift.  
OSD TRANSP. Adjusts the transparency level of the OSD.  
Press + or - to adjust.  
70%  
YES  
MONITOR ID  
ALL RESET  
Sets the monitor ID number from 1-26 or to "ALL".  
Resets settings back to factory default values.  
ALL  
OFF  
OFF  
YES  
-
FUNCTION  
Some functions  
available only  
when the  
Advanced OSD  
function in the  
FUNCTION  
menu is  
ADVANCED OSD  
ON: All menu items are shown for advanced users.  
YES  
OFF: Some of the advanced menu items are not shown.  
POWER SAVE  
Sets how long the monitor waits to go into power save mode after  
a signal is lost.  
VGA and DVI input and Separate HV sync. only.  
OFF  
YES  
INPUT SKIP  
Skips to next input if present input is no signal.  
This function is valid only for INPUT key on the display.  
OFF  
YES  
YES  
enabled.  
SUB PICTURE  
SUB  
P.DETECT  
This function automatically detects no input signal of sub screen.  
This feature is available only picture-in-picture mode.  
SUB P. DETECT: Sets availability of automatic detecting of sub  
screen.  
DISPLAY: Sets the appearance method of the sub screen.  
SUB P. RATE: Sets the transparency of the sub screen.  
AUTO  
The  
ADVANCED  
OSD function  
is always  
available.  
DISPLAY  
NORMAL  
100%  
YES  
YES  
SUB P.RATE  
ZOOM NAV  
Sets the position of the zoom navigation image.  
Sets the position of the captured still picture.  
BTM LFT  
S BY S1  
MANUAL  
YES  
YES  
YES  
PICTURE FREEZE  
SCREEN SAVER  
Use the SCREEN SAVER function to reduce the risk of Image  
Persistence.  
PEAK BRIGHT : The brightness is decreased depending on  
setting.  
ORBITER : The screen image moves slightly with squeezing or  
expanding.  
INVERSE : The screen image is displayed alternately between  
positive image and negative image, or the screen image is  
displayed full white.  
PEAK BRIGHT  
ORBITER  
100%  
AUTO1  
OFF  
YES  
YES  
YES  
INVERSE/  
WHITE  
CLOSED CAPTION  
(U.S. models only)  
Chooses the closed caption setting.  
OFF  
YES  
CAPTION CONT  
(U.S. models only)  
Chooses the brightness of the closed caption.  
NORMAL  
LAST  
YES  
YES  
YES  
INPUT DETECT  
INPUT  
Sets the input mode and the sound volume when the power turn  
on.  
LAST : last mode (the input that was last selected when the power  
turn off.)  
VOLUME  
LAST  
MULTI to DVI : fixed input mode.  
AUTO : Searches the input with the signal automatically  
PRIORITY : Sets the priority input for AUTO setting.  
PROTOCOL SET  
Sets protocol setting of RS-232C.  
OFF  
YES  
OFF : When NEC protocol is used (normal).  
ON : When special protocol is used.  
* Consult your dealer for details of protocol.  
RS232C CONTROL  
Selects the mode of the monitor when using the RS-232C daisy  
chain.  
NORMAL  
-
YES  
-
SIGNAL INFORMATION  
Display signal information such as frequencies, polarities, etc.  
English-17  
Operation  
2.35:1  
Picture Size Using Video Signals  
Image is expanded at a 2.35:1 ratio to fill the entire screen.  
e screen is filled vertically; however, some information  
will be lost on the leſt and right sides of the image.  
Select one of seven picture sizes manually.  
While viewing videos or digital video discs, perform the  
following actions:  
Available for the following inputs:  
Video, Component, or RGB input (480I, 480P, 576I, 576P,  
720P, 1080I, 1080P)  
1. Press the SIZE button on the remote control.  
2. To switch the screen sizes, press the SIZE button again  
within 3 seconds. e available sizes are NORMAL, FULL,  
DYNAMIC, ZOOM, 2.35:1, 14:9, and UNDERSCAN.  
If a 720p, 1080i, or 1080p signal is displayed, the available  
sizes are FULL, 2.35:1, DYNAMIC, and UNDERSCAN.  
To avoid image retention, use the 2.35:1 image size if black  
bars are displayed at the top and bottom of the screen  
showing the displayed image.  
If displaying an enhanced split-screen, the available sizes are  
NORMAL and FULL.  
NORMAL (4:3)  
Images with a 4:3 (Normal) aspect ratio are displayed.  
14:9  
Image is displayed at a 14:9 aspect ratio.  
Available for the following inputs:  
Video, Component, or RGB input (480I, 480P, 576I, 576P)  
FULL  
Horizontally expands anamorphic signals to display the  
correct linearity.  
Normal (4:3) images are horizontally expanded to fill the  
entire screen.  
UNDERSCAN  
Standard televisions crop (Underscan) images. Utilize the  
UNDERSCAN function in the SCREEN menu to display the  
entire image.  
DYNAMIC  
Vertically and horizontally expands the picture but at  
different aspect ratios.  
NOTE: Depending on the type of component used, black  
borders or signal noise may appear near the screen  
edges while in UNDERSCAN mode.  
Over a period of time, image ghosting, shadowing,  
or burn-in may result from continuous display of  
underscanned images. While in UNDERSCAN  
mode, the brightness may change if a Macrovision  
signal is input.  
ZOOM  
Vertically and horizontally expands the picture while  
maintaining the correct aspect ratio.  
NOTE: Do not display 4:3 content in NORMAL mode for  
extended periods of time to avoid image ghosting,  
shadowing, or burn-in.  
English-18  
Operation  
- continued  
Information:  
Picture Size Using Computer  
Signals  
Supported resolutions: For further information on the  
display output of the various VESA signal standards  
supported by the unit, see pages 31 - 36.  
To expand a 4:3 image to fill the entire screen, switch to the  
widescreen mode.  
When 1360 dot x 768 line wide XGA signals with a vertical  
frequency of 60 Hz and a horizontal frequency of 47.7 kHz  
are input:  
While viewing videos or digital video discs, perform the  
following actions:  
1. Press the SIZE button on the remote control.  
1. Select an appropriate setting for the RGB SELECT mode.  
2. To switch the screen sizes, press the SIZE button again  
within 3 seconds. e available sizes are NORMAL, FULL,  
and ZOOM.  
2. Refer to the Resolutions Supported section of Model  
Information on pages 31 - 36.  
If an enhanced split-screen is displayed, the available sizes  
are NORMAL and FULL.  
NOTE: Do not display 4:3 content in NORMAL mode  
for extended periods of time to avoid image  
shadowing, ghosting, or burn-in.  
NORMAL (4:3 or SXGA 5:4)  
Images are displayed normally.  
FULL  
Horizontally expands anamorphic signals to display the  
correct linearity.  
Normal (4:3) images are horizontally expanded to fill the  
entire screen.  
ZOOM  
Vertically and horizontally expands the picture, while  
maintaining the correct aspect ratio.  
English-19  
Operation  
- continued  
Press the SWAP button to swap pictures.  
Split Screen Mode  
To display multiple pictures on the screen, perform the  
following actions:  
VGA  
A
B
1. Press the desired SPLIT SCREEN function button on the  
remote (PIP, S BY S, SINGLE).  
SWAP  
Only certain RGB signals are supported.  
VGA  
B
A
A
PIP  
button  
SINGLE  
button  
S BY S  
button  
SINGLE  
button  
PIP  
Press the SELECT/FREEZE button to change the active  
picture.  
VGA  
button  
VGA  
A
B
A
VGA  
B
VIDEO1 is active.  
S BY S  
button  
A
B
Split Screen mode works according to the table below.  
SELECT/FREEZE  
Side by Side Mode  
VIDEO1  
Press the -, +, p or q buttons to change the picture size.  
VGA  
VGA is active.  
A
B
+
+
button  
button  
VGA  
VGA  
VGA  
B
A
A
B
B
A
-
-
Side by Side2-R  
Side by Side1  
Side by Side2-L  
button  
button  
q
p
q
p
q
p
button  
button  
button  
button  
button  
button  
+
+
button  
button  
VGA  
VGA  
VGA  
A
B
A
B
B
A
-
-
button  
button  
Side by Side4-R  
Side by Side3  
Side by Side4-L  
PIP normal operation test  
PIP  
available  
Sub source  
VIDEO1  
- -  
S-VIDEO  
YES  
DVD/HD1  
YES  
DVD/HD2  
YES  
DVD/HD3  
YES  
SCART1  
SCART2  
VGA  
YES  
YES  
DVI  
YES  
YES  
VIDEO1  
- -  
- -  
- -  
- -  
S-VIDEO  
YES  
- -  
YES  
YES  
YES  
DVD/HD1  
DVD/HD2  
DVD/HD3  
SCART1  
YES  
YES  
YES  
- -  
YES  
YES  
YES  
- -  
- -  
YES  
YES  
- -  
YES  
- -  
YES  
YES  
- -  
- -  
- -  
- -  
- -  
YES  
YES  
YES  
- -  
YES  
YES  
- -  
Main  
YES  
- -  
YES  
- -  
YES  
- -  
source  
YES  
YES  
SCART2  
VGA  
- -  
- -  
- -  
- -  
YES  
YES  
- -  
- -  
- -  
- -  
- -  
- -  
YES  
YES  
YES  
YES  
YES  
YES  
DVI  
YES  
YES  
YES  
YES  
- -  
YES  
YES  
YES  
- -  
English-20  
Operation  
- continued  
Picture-in-Picture Mode  
Displaying Input Signal  
Press the + and - buttons to change the position of the sub-  
1. To make the desired picture active, press the SELECT/  
FREEZE button.  
picture.  
+
VGA  
VGA  
button  
2. To change the active signal, press the VIDEO, DVD/HD,  
or RGB button.  
B
B
A
A
e input selection may also be changed by pressing the  
INPUT button on the front of the unit.  
-
button  
-
+
+
-
button  
button  
button  
button  
-
VGA  
VGA  
Adjusting the OSD controls  
button  
1. To make the desired picture active, press the SELECT/  
FREEZE button.  
A
A
B
B
+
button  
2. To display the main menu, press the MENU button.  
3. Adjust the settings as desired.  
Press the p and q buttons to change the size of the sub-  
picture.  
VGA  
NOTE: Some OSD functions may not be available in Split-  
button  
A
Screen mode.  
B
VGA  
button  
A
button  
B
VGA  
button  
A
button  
B
VGA  
A
button  
B
Press the SELECT/FREEZE button to change the active  
picture.  
VGA  
VIDEO1  
VGA  
A
A
B
B
English-21  
Operation  
- continued  
Picture Settings Menu  
Storing picture settings  
is function stores the current input signal and PICTURE  
menu settings in memory in order to recall these settings if  
necessary. Up to six different settings can be stored.  
Notes of up to 15 characters long can also be stored along  
with each setting.  
Example: Storing picture settings at MEMORY1  
On the “PICTURE MEMORY” function under the  
“PICTURE” menu, select “MEMORY1” and press the SET  
button. e “PICTURE MEMORY” screen appears.  
PICTURE MEMORY  
OFF: Picture memory not used.  
MEMORY1 TO 6: Choose the desired memory slot to set.  
ere are 6 to choose from, independent of inputs.  
SETTING THE MEMORY  
Use the p and q buttons to select the desired memory slot,  
from MEMORY1 to MEMORY6.  
Use the t and u buttons to select “SET”, then press the SET  
button.  
If necessary, input a note.  
RESETTING THE MEMORY  
Use the p and q buttons to select the desired memory slot,  
from MEMORY1 to MEMORY6, then use the t and u  
buttons to select “RESET”, and press the SET button.  
e memory is cleared, and “—” is displayed in the “INPUT”,  
“SIGNAL” and “NOTE” columns.  
INPUTTING NOTES  
Use the t and u buttons to select “NOTE”, then press the  
SET button.  
Use the p and q button to select the character.  
Use the t and u buttons to move the cursor.  
Use the SET button to delete the character at the cursor  
position.  
When you have finished inputting the note, press the EXIT  
button.  
English-22  
RS-232C  
Functions that can be controlled via RS-232C:  
is Plasma monitor can be controlled via personal  
computer using an RS-232C connection.  
• Powering ON or OFF  
• Switching input signals  
MONITOR ID and RS-232C CONTROL  
Up to 26 individual monitors can be controlled through a  
daisy chain via RS-232C connection.  
NOTE: If your PC (IBM or IBM compatible) is equipped  
only with a 25-pin serial port connector, a 25-pin  
serial port adapter is required. Contact your dealer  
for details.  
1. Connect PC to the monitor.  
NOTE: In order to function, the RS-232C OUT terminal  
can only be connected to another monitor of the  
same model. Do not connect to other types of  
equipment.  
Connect a PC’s RS-232C control output to the monitor's  
RS-232C input. You can then connect the  
RS-232C output from this monitor to another monitor’s  
RS-232C input. Up to 26 monitors can be connected  
using RS-232C.  
2. Set Monitor ID and RS-232C Control mode.  
For proper operation, the Monitor ID should be  
set in the OSD menu of each monitor that is in the  
chain. e Monitor ID can be set under the “SETUP”  
menu in the OSD. e Monitor ID number can be set  
within a range from 1 to 26 or set to "ALL". No two  
monitors should share the same Monitor ID number.  
It is recommended to number each monitor in a daisy  
chain sequentially from 1. e first monitor in the daisy  
chain is designated as the primary monitor. Subsequent  
monitors with the chain are secondary monitors.  
In the “FUNCTION” menu on the first monitor in the  
RS-232C daisy chain set the "RS232C CONTROL"  
to "NORMAL". Set the "RS232C CONTROL" to  
“SECONDARY” on all other monitors.  
is monitor uses RXD, TXD and GND  
lines for RS-232C control.  
e reverse type cable (null modem cable)  
should be used for RS-232C control.  
OUT  
OUT  
IN  
IN  
RS-232C (IN)  
RS-232C (IN)  
RS-232C (OUT)  
RS-232C (OUT)  
PC  
(Out)  
RS-232C Cable  
RS-232C Cable  
English-23  
RS-232C  
- continued  
e following control sequence is used for a single monitor  
When using the following control commands, all of the daisy-chained monitors  
can be controlled at the same time from the primary monitor. However, reply and  
status commands will only pertain to the primary monitor, and not to the secondary  
monitors.  
1) Interface  
PROTOCOL  
BAUD RATE  
DATA LENGTH  
PARITY BIT  
STOP BIT  
RS-232C  
9600 [bps]  
8 [bits]  
NONE  
1 [bit]  
FLOW CONTROL NONE  
2) Control command diagram  
e command is structured by the address code, function code, data code and end  
code. e length of the command is different for each function.  
Address Code  
30h 30h  
Function Code  
Function  
Data Code  
Data  
End Code  
0Dh  
HEX  
ASCII  
'0' '0'  
Function  
Data  
[Address code] 30h 30h (In ASCII code, '0' '0') fixed.  
[Function code] A code of each fixed control move.  
[Data code]  
A code of each fixed control data (number) and  
not always indicated.  
[End code]  
0Dh (In ASCII code, ' ' ) fixed.  
To control multiple monitors that are daisy-  
chained together please use the extended control  
command.  
English-24  
RS-232C  
- continued  
3) Control sequence  
1) e command from a computer to the Plasma monitor will take 400ms.  
2) e Plasma monitor will send a return command 400ms* aſter it has received  
an encode. If the command is not received correctly,  
the Plasma monitor will not send the return command.  
3) e personal computer checks the command and confirms if the  
command which has been sent has been executed or not.  
4) is Plasma monitor sends various codes other than the return code. When  
sending a control sequence via RS-232C, other codes from personal  
computers will be ignored.  
*e sending time of the return command may be delayed depending on the  
monitor’s current activity (changing of the input signal, etc.).  
[Example] Turn the power ON. (' ' is for ASCII code)  
Sending commands Status code from  
Meaning  
from the PC etc.  
Plasma monitor  
30 30 21 0D  
'0' '0' '!' ' '  
Command for  
POWER ON  
30 30 21 0D  
'0' '0' '!' ' '  
Command received  
(Command echo back)  
4) Operation commands  
Operation commands execute the basic operation setting of this Plasma  
monitor. It may not operate when changing the signal:  
Operation  
POWER ON  
ASCII  
!
HEX  
21h  
POWER OFF  
"
22h  
INPUT VIDEO1  
INPUT S-VIDEO  
INPUT DVD/HD1  
INPUT DVD/HD2  
INPUT DVD/HD3  
INPUT SCART2  
INPUT VGA  
_v1  
_v3  
_v2  
_v5  
_h1  
_v6  
_r2  
_r1  
5Fh 76h 31h  
5Fh 76h 33h  
5Fh 76h 32h  
5Fh 76h 35h  
5Fh 68h 31h  
5Fh 76h 36h  
5Fh 72h 32h  
5Fh 72h 31h  
INPUT DVI  
• POWER OFF command should not be used less than 1 minute aſter the power is  
turned on.  
• POWER ON command should not be used less than 1 minute aſter the power is  
turned off.  
English-25  
RS-232C  
- continued  
5) Read command  
Host computer sends the command without Data-code to monitor.  
Aſter receiving this command, the monitor returns the command with Data-code  
of current status to host computer.  
<ex> When the Host computer checks the Power status of monitor, the status of  
monitor is powered-on.  
Command from  
computer  
Command from  
Monitor  
Detail of command  
30 30 76 50 0D  
‘0’’0’’v’’P’[enter]  
Ask about the power  
status of monitor.  
30 30 76 50 31 0D  
‘0’’0’’v’'P'’1’[enter]  
Monitor is powered-on.  
Structure of the Read-command  
ASCII  
HEX  
Function Data Function Data  
POWER ON  
vP  
vP  
vI  
1
76h 50h 31h  
POWER OFF  
0
76h 50h 30h  
INPUT VIDEO1  
v1  
v3  
v2  
v5  
h1  
v6  
r2  
76h 49h 76h 31h  
76h 49h 76h 33h  
76h 49h 76h 32h  
76h 49h 76h 35h  
76h 49h 68h 31h  
76h 49h 76h 36h  
76h 49h 72h 32h  
76h 49h 72h 31h  
76h 4Dh 70h 31h  
76h 4Dh 70h 32h  
76h 4Dh 70h 33h  
76h 4Dh 70h 34h  
76h 4Dh 70h 35h  
INPUT S-VIDEO  
vI  
INPUT DVD/HD1  
INPUT DVD/HD2  
INPUT DVD/HD3  
INPUT SCART2  
vI  
vI  
vI  
vI  
INPUT VGA  
vI  
INPUT DVI  
vI  
r1  
Picture Mode BRIGHT  
Picture Mode STANDARD  
Picture Mode CINEMA1  
Picture Mode CINEMA2  
Picture Mode DEFAULT  
vM  
vM  
vM  
vM  
vM  
p1  
p2  
p3  
p4  
p5  
English-26  
Troubleshooting  
No picture  
Display image is not sized properly  
• e signal cable should be properly connected to the display  
card/computer.  
• Use the OSD screen controls to increase or decrease the clock  
total.  
• e display card should be properly seated in its slot.  
• Front Power Switch and computer power switch should be in  
the ON position.  
• Check to make sure that a supported mode has been selected  
on the display card or system being used. (Please consult  
display card or system manual to change graphics mode.)  
• Check to make sure that a supported mode has been selected  
on the display card or system being used. (Please consult  
display card or system manual to change graphics mode.)  
• Check the monitor and your display card with respect to  
compatibility and recommended settings.  
Selected resolution is not displayed properly  
• Use OSD information to enter Information menu and confirm  
that the appropriate resolution has been selected. If not, select  
appropriate resolution.  
•
Check the signal cable connector for bent or pushed-in pins.  
No Sound  
• Check to see if speaker cable is properly connected.  
• Check to see if mute is activated.  
• Check to see if volume is set at minimum.  
NOTE: It is possible to play audio from a source that is different  
from the video source.  
Power Button does not respond  
• Unplug the power cord of the monitor from the AC outlet to  
turn off and reset the monitor.  
Image persistence  
• Please be aware that Plasma Technology may experience a  
phenomena known as Image Persistence. Image Persistence  
occurs when a residual or “ghost” image of a previous image  
remains visible on the screen. Unlike CRT monitors, Plasma  
monitors’ image persistence is not permanent, but constant  
images being displayed for a long period of time should be  
avoided. To alleviate image persistence, turn off the monitor  
for as long as the previous image was displayed. For example,  
if an image was on the monitor for one hour and a residual  
image remains, the monitor should be turned off for one hour  
to erase the image.  
RS-232C does not work  
•
Check the PROTOCOL SET in the FUNCTION menu.  
Remote Control does not work  
• Make sure the batteries are inserted properly.  
• Test the batteries for strength/life.  
• Make sure to point the remote directly at the sensor on the  
monitor.  
• Check if the remote is in Remote ID mode.  
• e remote control may not function when in direct sunlight  
or when there is strong illumination on the remote sensor of  
the monitor.  
NOTE: As with all personal display devices, NEC DISPLAY  
SOLUTIONS recommends displaying moving images and  
using a moving screen saver at regular intervals whenever the  
screen is idle or turning off the monitor when not in use.  
Image is unstable, unfocused or  
swimming is apparent  
• Signal cable should be properly attached to the Plasma  
monitor, computer, or other input device.  
• Use the OSD screen controls to focus and adjust display by  
increasing or decreasing the clock phase total. When the  
display mode is changed, the OSD Image Adjust settings may  
need to be readjusted.  
• Check the monitor and your display card with respect to  
compatibility and recommended signal timings.  
Image of component signal is greenish  
• Check to see if the DVD/HD input connector is selected.  
LED on monitor is not lit  
(no green or red color can be seen)  
• Main Power Switch should be in the ON position and power  
cord should be connected.  
Red LED on monitor is blinking  
• A certain failure might have occurred, please contact your  
nearest authorized NEC DISPLAY SOLUTIONS service  
facility.  
English-27  
Specifications 42XC10  
PDP Module  
Diagonal: 42 "/1058 mm  
Pixel Pitch  
Resolution  
Horizontal  
0.900 mm (W)/0.676 mm (H)  
1024 x 768  
Frequency  
ANALOG: 15.625/15.734kHz, 31.0kHz - 108.5kHz  
DIGITAL: 15.625/15.734kHz, 31.0kHz - 91.1kHz  
24Hz to 120.4Hz  
Vertical  
Panel Display Size  
Input Signals  
922 mm (W) x 519 mm (H)  
36.3 in (W) x 20.4 in (H)  
DVI  
DVI-D 24pin  
Digital RGB  
Analog RGB  
Sync  
DVI (HDCP)  
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*, 1920X1080*  
0.7V p-p, Input Impedance 75 ohm  
VGA  
15pin Mini D-sub  
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*  
Separate: TTL level (Pos./Neg.)  
Composite sync on Green Video: 0.3Vp-p Neg  
Y : 1.0Vp-p/75ohm, Cb/Cr (Pb/Pr) : 0.7Vp-p/75 ohm  
DVD/HD1,2  
RCA (Y, Cb/Pb, Cr/Pr)  
HDMI Type-A  
Component  
HDTV/DVD:1080p*, 1080i*, 720p@50Hz/60Hz,  
576p@50Hz, 480p@60Hz, 576i@50Hz, 480i@60Hz  
DVD/HD3  
(HDMI)  
Digital  
Component  
HDMI  
1080p*,1080i*,720p@ 50Hz/60Hz, 576p@ 50Hz, 480p@ 60Hz, 576i@50Hz,  
480i@60Hz  
VIDEO1  
S-VIDEO  
RCA  
Composite  
S-VIDEO  
1.0V p-p Input Impedance 75 ohm  
NTSC/PAL(B, G, M, N)/SECAM/4.43NTSC/PAL60  
mini DIN 4 pin  
Y: 1.0Vp-p/75ohm C: 0.286Vp-p/75 ohm(NTSC),  
0.3Vp-p/75ohm(PAL/SECAM)  
NTSC/PAL(B, G, M, N)/SECAM/4.43NTSC/PAL60  
Stereo L/R 0.5Vrms  
Audio  
AUDIO Input  
RCA (L/R) X3  
HDMI Type-A  
Analog Audio  
DIGITAL Audio PCM 32, 44.1, 48Khz (16bit)  
Speaker Output  
External Control  
External Speaker Jack 8W + 8W (8 ohm)  
RS-232C: IN  
9 Pin D-sub  
RS-232C: OUT  
9 Pin D-sub (daisy chain)  
Power Supply  
4.4-1.8A@100-240V AC, 50/60Hz  
Operational Environment  
Temperature  
Humidity  
Temperature  
Humidity  
Net  
0˚ to 40˚C / 32˚ F to 104˚ F  
20% to 80% (without condensation)  
Storage Environment  
Dimensions (WxHxD)  
-10˚C to 50˚C / 14˚ F to 122˚ F  
10 - 90% (without condensation) / 90% - 2% x (Temp - 40°C) regarding over 40°C  
1036mm(W) x 649mm(H) x 130mm(D) / 40.8"(W) x 25.6"(H) x 5.1"(D)  
1220mm(W) x 900mm(H) x 360mm(D) / 48.0"(W) x 35.4"(H) x 14.2"(D)  
34.5 kg / 76.1 lbs  
Gross  
Weight  
(without speaker and stand )  
Net  
Gross  
42.5 kg / 93.7 lbs  
VESA compatible arm  
mounting interface  
700mm x 300mm  
4 Holes (screw M8 Depth 16mm)  
Complied Regulatory  
and Guidelines  
UL 60065/CSA C22.2 No.60065/EN60065/IEC60065  
FCC-B/DOC-B/EN55022-B/EN55024/EN61000-3-2/EN61000-3-3/CE/C-Tick  
Power Management  
Plug & Play  
VESA DPM (Separate HV Sync. only)  
VESA DDC2B  
Accessories  
Remote control, AA Batteries, Power cord, Users Manual (CD-ROM),  
Start Up Guide (Paper / CD-ROM), Main Power Switch cover and screw, Cable clamps  
*Compressed Image  
English-28  
Specifications 50XC10  
PDP Module  
Frequency  
Diagonal: 50"/1269 mm  
Pixel Pitch  
Resolution  
Horizontal  
0.81 mm (W)/0.81 mm (H)  
1365 x 768  
ANALOG: 15.625/15.734kHz, 31.0kHz - 108.5kHz  
DIGITAL: 15.625/15.734kHz, 31.0kHz - 91.1kHz  
24Hz to 120.4Hz  
Vertical  
Panel Display Size  
Input Signals  
1106 mm (W) x 622 mm (H)  
43.5 in (W) x 24.5 in (H)  
DVI  
DVI-D 24pin  
Digital RGB  
Analog RGB  
Sync  
DVI (HDCP)  
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*, 1920X1080*  
0.7V p-p, Input Impedance 75 ohm  
VGA  
15pin Mini D-sub  
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*  
Separate: TTL level (Pos./Neg.)  
Composite sync on Green Video: 0.3Vp-p Neg  
Y : 1.0Vp-p/75ohm, Cb/Cr (Pb/Pr) : 0.7Vp-p/75 ohm  
DVD/HD1,2  
RCA (Y, Cb/Pb, Cr/Pr)  
HDMI Type-A  
Component  
HDTV/DVD:1080p*, 1080i*, 720p@50Hz/60Hz,  
576p@50Hz, 480p@60Hz, 576i@50Hz, 480i@60Hz  
DVD/HD3  
(HDMI)  
Digital  
Component  
HDMI  
1080p*,1080i*,720p@ 50Hz/60Hz, 576p@ 50Hz, 480p@ 60Hz, 576i@50Hz,  
480i@60Hz  
VIDEO1  
S-VIDEO  
RCA  
Composite  
S-VIDEO  
1.0V p-p Input Impedance 75 ohm  
NTSC/PAL(B, G, M, N)/SECAM/4.43NTSC/PAL60  
mini DIN 4 pin  
Y: 1.0Vp-p/75ohm C: 0.286Vp-p/75 ohm(NTSC),  
0.3Vp-p/75ohm(PAL/SECAM)  
NTSC/PAL(B, G, M, N)/SECAM/4.43NTSC/PAL60  
Stereo L/R 0.5Vrms  
Audio  
AUDIO Input  
RCA (L/R) X3  
HDMI Type-A  
Analog Audio  
DIGITAL Audio PCM 32, 44.1, 48Khz (16bit)  
Speaker Output  
External Control  
External Speaker Jack 8W + 8W (8 ohm)  
RS-232C: IN  
9 Pin D-sub  
RS-232C: OUT  
9 Pin D-sub (daisy chain)  
Power Supply  
6.0-2.6A@100-240V AC, 50/60Hz  
Operational Environment  
Temperature  
Humidity  
Temperature  
Humidity  
Net  
0˚ to 40˚C / 32˚ F to 104˚ F  
20% to 80% (without condensation)  
Storage Environment  
Dimensions (WxHxD)  
-10˚C to 50˚C / 14˚ F to 122˚ F  
10 - 90% (without condensation)/ 90% - 2% x (Temp - 40°C) regarding over 40°C  
1221mm(W) x 748mm(H) x 130mm(D) / 48.1"(W) x 29.4"(H) x 5.1"(D)  
1400mm(W) x 980mm(H) x 360mm(D) / 55.1"(W) x 38.6"(H) x 14.2"(D)  
49.0 kg / 108.0 lbs  
Gross  
Weight  
(without speaker and stand )  
Net  
Gross  
59.0 kg / 130.1 lbs  
VESA compatible arm  
mounting interface  
700mm x 300mm  
4 Holes (screw M8 Depth 16mm)  
Complied Regulatory  
and Guidelines  
UL 60065/CSA C22.2 No.60065/EN60065/IEC60065  
FCC-B/DOC-B/EN55022-B/EN55024/EN61000-3-2/EN61000-3-3/CE/C-Tick  
Power Management  
Plug & Play  
VESA DPM (Separate HV Sync. only)  
VESA DDC2B  
Accessories  
Remote control, AA Batteries, Power cord, Users Manual (CD-ROM),  
Start Up Guide (Paper / CD-ROM), Main Power Switch cover and screw, Cable clamps  
*Compressed Image  
English-29  
Specifications 60XC10  
PDP Module  
Diagonal: 60"/1514 mm  
Pixel Pitch  
Resolution  
Horizontal  
0.966 mm (W)/0.966 mm (H)  
1366 x 768  
Frequency  
ANALOG: 15.625/15.734kHz, 31.0kHz - 108.5kHz  
DIGITAL: 15.625/15.734kHz, 31.0kHz - 91.1kHz  
24Hz to 120.4Hz  
Vertical  
Panel Display Size  
Input Signals  
1320 mm (W) x 742 mm (H)  
51.9 in (W) x 29.2 in (H)  
DVI  
DVI-D 24pin  
Digital RGB  
Analog RGB  
Sync  
DVI (HDCP)  
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*, 1920X1080*  
0.7V p-p, Input Impedance 75 ohm  
VGA  
15pin Mini D-sub  
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*  
Separate: TTL level (Pos./Neg.)  
Composite sync on Green Video: 0.3Vp-p Neg  
Y : 1.0Vp-p/75ohm, Cb/Cr (Pb/Pr) : 0.7Vp-p/75 ohm  
DVD/HD1,2  
RCA (Y, Cb/Pb, Cr/Pr)  
HDMI Type-A  
Component  
HDTV/DVD:1080p*, 1080i*, 720p@50Hz/60Hz,  
576p@50Hz, 480p@60Hz, 576i@50Hz, 480i@60Hz  
DVD/HD3  
(HDMI)  
Digital  
Component  
HDMI  
1080p*,1080i*,720p@ 50Hz/60Hz, 576p@ 50Hz, 480p@ 60Hz, 576i@50Hz,  
480i@60Hz  
VIDEO1  
S-VIDEO  
RCA  
Composite  
S-VIDEO  
1.0V p-p Input Impedance 75 ohm  
NTSC/PAL(B, G, M, N)/SECAM/4.43NTSC/PAL60  
DIN 4 pin  
Y: 1.0Vp-p/75ohm C: 0.286Vp-p/75 ohm(NTSC),  
0.3Vp-p/75ohm(PAL/SECAM)  
NTSC/PAL(B, G, M, N)/SECAM/4.43NTSC/PAL60  
Stereo L/R 0.5Vrms  
Audio  
AUDIO Input  
RCA (L/R) X3  
HDMI Type-A  
Analog Audio  
DIGITAL Audio PCM 32, 44.1, 48Khz (16bit)  
Speaker Output  
External Control  
External Speaker Jack 8W + 8W (8 ohm)  
RS-232C: IN  
9 Pin D-sub  
RS-232C: OUT  
9 Pin D-sub (daisy chain)  
Power Supply  
7.8-3.2A@100-240V AC, 50/60Hz  
Operational Environment  
Temperature  
Humidity  
Temperature  
Humidity  
Net  
0˚ to 40˚C / 32˚ F to 104˚ F  
20% to 80% (without condensation)  
Storage Environment  
Dimensions (WxHxD)  
-10˚C to 50˚C / 14˚ F to 122˚ F  
10 - 90% (without condensation)/ 90% - 2% x (Temp - 40°C) regarding over 40°C  
1447mm(W) x 876mm(H) x 130mm(D) / 57.0"(W) x 34.5"(H) x 5.1"(D)  
1620mm(W) x 1100mm(H) x 360mm(D) / 63.8"(W) x 43.3"(H) x 14.2"(D)  
70.0 kg / 154.3 lbs  
Gross  
Weight  
(without speaker and stand )  
Net  
Gross  
83.0 kg / 183.0 lbs  
VESA compatible arm  
mounting interface  
700mm x 300mm  
4 Holes (screw M8 Depth 16mm)  
Complied Regulatory  
and Guidelines  
UL 60065/CSA C22.2 No.60065/EN60065/IEC60065  
FCC-B/DOC-B/EN55022-B/EN55024/EN61000-3-2/EN61000-3-3/CE/C-Tick  
Power Management  
Plug & Play  
VESA DPM (Separate HV Sync. only)  
VESA DDC2B  
Accessories  
Remote control, AA Batteries, Power cord, Users Manual (CD-ROM),  
Start Up Guide (Paper / CD-ROM), Main Power Switch cover and screw, Cable clamps  
*Compressed Image  
English-30  
42XC10 Supported Resolutions (PC)  
English-31  
42XC10 Supported Resolutions (Video)  
English-32  
50XC10 Supported Resolutions (PC)  
English-33  
50XC10 Supported Resolutions (Video)  
English-34  
Supported Resolutions (PC) 60XC10  
English-35  
60XC10 Supported Resolutions (Video)  
English-36  
Pin Assignment  
1) Analog RGB Input (Mini D-SUB 15P) VGA  
Pin No. Name  
3) RS-232C Input  
(D-SUB 9P)  
1 Video Signal Red  
Pin No. Name  
2 Video Signal Green  
1
1 Connected to 7 & 8  
3 Video Signal Blue  
5
2 RXD  
4 GND  
6
10  
3 TXD  
5 DDC-GND  
11  
15  
4 Connected to 6  
5 GND  
6 Red-GND  
7 Green-GND  
8 Blue-GND  
6 Connected to 4  
7 Connected to 1 & 8  
8 Connected to 1 & 7  
9 NC  
Mini D-SUB 15P  
9 +5V (DDC)  
10 SYNC-GND  
11 GND  
12 DDC-SDA  
13 H-SYNC  
14 V-SYNC  
15 DDC-SCL  
5
1
9
6
D-SUB 9P  
2) Digital RGB Input (DVI-D) DVI  
1 TX2-  
9 TX1-  
17 TX0-  
18 TX0+  
2 TX2+  
10 TX1+  
3 Shield (TX2/TX4)  
4 NC  
11 Shield (TX1/TX3) 19 Shield (TXP/TX5)  
12 NC  
13 NC  
20 NC  
5 NC  
21 NC  
6 DDC-Serial Clock 14 +5 power  
22 Shield (TXC)  
23 TXC+  
7 DDC-Serial Data  
8 NC  
15 Ground (+5V)  
16 Hot Plug Detect 24 TXC-  
8
1
9
16  
DVI-D  
17  
24  
English-37  
WEEE Mark (European Directive 2002/96/EC)  
Within the European Union  
EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products  
carrying the mark (leſt) must be disposed of separately from normal household waste. is includes monitors and  
electrical accessories, such as signal cables or power cords. When you need to dispose of your NEC display products,  
please follow the guidance of your local authority, or ask the shop where you purchased the product, or if applicable,  
follow any agreements made between yourself and NEC. e mark on electrical and electronic products only applies  
to the current European Union Member States.  
e mark on electrical and electronic products only applies to the current European Union Member States.  
Outside the European Union  
If you wish to dispose of used electrical and electronic products outside the European Union, please contact your  
local authority so as to comply with the correct disposal method.  
Declaration of the Manufacturer  
We hereby certify that the color monitor  
P426Y3, P506Y4 or P606Y5 is in compliance  
with Council Directive 73/23/EEC:  
and marked with  
–
EN 60065  
Council Directive 89/336/EEC:  
— EN 55022  
— EN 61000-3-2  
— EN 61000-3-3  
— EN 55024  
NEC Display Solutions Ltd.  
4-13-23, Shibaura,  
Minato-Ku  
Tokyo 108-0023, Japan  
DECLARATION OF CONFORMITY  
is device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) is  
device may not cause harmful interference, and (2) this device must accept any interference received, including  
interference that may cause undesired operation.  
U.S. Responsible Party:  
Address:  
NEC Display Solutions of America, Inc.  
500 Park Blvd. Suite 1100  
Itasca, IL 60143  
Tel. No.:  
(630)467-3000  
Type of Product:  
Equipment Classification:  
Model:  
Computer Monitor  
Class B Peripheral  
PlasmaSync 42XC10 (P426Y3)  
PlasmaSync 50XC10 (P506Y4)  
PlasmaSync 60XC10 (P606Y5)  
We hereby declare that the equipment specified above  
conforms to the technical standards as specified in the FCC Rules.  
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of  
HDMI Licensing LLC.  
Windows is a registered trademark of Microsoſt Corporation. NEC is a registered trademark of NEC Corporation.  
All other brands and product names are trademarks or registered trademarks of their respective owners.  

IBM CFC2 User Manual
Intel I925XE User Manual
JVC AV 20N4 User Manual
JVC AV 32WFX1EU AV 28WFX1EU User Manual
Kenwood DDX8039 User Manual
NEC MultiSync LCD1770V LCD1770NX LCD1770NXM User Manual
NEC PD75402A User Manual
Panasonic CT 32SL13 CT 36SL13 CT 32SC13 CT 36SC13 CT 3653 User Manual
Philips 21PT4224 User Manual
Philips 21PT5321 User Manual