User Guide
COLOR LCD DIGITAL
CORDLESS PHONE
Model ME4251 Series
Digital 1.8 GHz
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 2
For product-related questions, please refer to the Warranty section.
Please retain your original dated sales receipt for your records. For warranty service of
your Motorola Product, you will need to provide a copy of your dated sales receipt to
confirm warranty status.
Complies with the essential protective requirements and objectives of the EC’s R&TTE
Directive 1999/5/EC; EC Low Voltage Directive 72/23/EEC; EC EMC Directive 89/336/EEC
Copyright © 2004 Motorola, Inc.
All rights reserved. No part of this publication may be reproduced in any form or by
any means or used to make any derivative work (such as translation, transformation or
adaptation) without written permission from Motorola, Inc.
Motorola reserves the right to revise this publication and to make changes in content
from time to time without obligation on the part of Motorola to provide notification of
such revision or change. Motorola provides this guide without warranty of any kind,
either implied or expressed, including but not limited to, the implied warranties of mer-
chantability and fitness for a particular purpose. Motorola may make improvements or
changes in the product(s) described in this manual at any time.
MOTOROLA, the Stylized M Logo, and PhoneWrap are registered in the U.S. Patent and
Trademark Office. All other product or service names are the property of their
respective owners.
For details, please contact :
0870 197 4131 UK
2
BD1217 ME4251 user guide [5] 18/7/05
Page 3
Contents
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Navigating the Menu . . . . . . . . . . . . . . . .15
Using theTelephone . . . . . . . . . . . . . . . . .16
Switching the Handset On / Off . . . . . . .16
Making External Calls . . . . . . . . . . . . . . .16
Handset Range . . . . . . . . . . . . . . . . . . .16
Direct dialing . . . . . . . . . . . . . . . . . . . . .17
On-hook dialing . . . . . . . . . . . . . . . . . . .17
Using the Handsfree Speakerphone . . .17
Make a handsfree call . . . . . . . . . . . . . . .17
Switch to handsfree during a call . . . . .18
Taking Calls . . . . . . . . . . . . . . . . . . . . . . .18
Handset is in the Base Station/
Important Safety Instructions . . . . . . . . . .5
Installation Guidelines . . . . . . . . . . . . . . . .6
Technical Amendments . . . . . . . . . . . . . . .7
Installation . . . . . . . . . . . . . . . . . . . . . . . . . .8
Package Contents . . . . . . . . . . . . . . . . . . . .8
Setting up the Base Station and
Charger Unit . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting the Base Station and
Mains Adaptor . . . . . . . . . . . . . . . . . . . . . .9
Connecting the Charger Unit . . . . . . . . .10
Preparing the Handset(s) . . . . . . . . . . . .10
Inserting and Charging the Batteries . . .10
Low Battery Warning . . . . . . . . . . . . . . . .11
Attaching a Headset . . . . . . . . . . . . . . . . .11
charger (auto-answer) . . . . . . . . . . . . .18
Handset is not in the
Base Station/charger . . . . . . . . . . . . . . .18
Prefix Dialing . . . . . . . . . . . . . . . . . . . . .18
Dialing from the Phone Book . . . . . . . . .19
Holding and Forwarding Calls . . . . . . . .19
Calling with More than One Handset . .19
Making Internal Calls . . . . . . . . . . . . . . . .20
Receiving Internal Calls . . . . . . . . . . . . . .20
Transfering/Forwarding a Call to
Technical Data . . . . . . . . . . . . . . . . . . . . .11
Telephone Features . . . . . . . . . . . . . . . . . .12
Control Buttons . . . . . . . . . . . . . . . . . . . .13
another Handset . . . . . . . . . . . . . . . . . . .20
Teleconference . . . . . . . . . . . . . . . . . . . . .21
Paging Handsets . . . . . . . . . . . . . . . . . . .21
Muting the Microphone . . . . . . . . . . . . .21
Key lock . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Shortcut Keys . . . . . . . . . . . . . . . . . . . . . .22
Display Icons . . . . . . . . . . . . . . . . . . . . . . .14
Menu Icons . . . . . . . . . . . . . . . . . . . . . . . .14
Display Backlight . . . . . . . . . . . . . . . . . . .14
Menu Structure . . . . . . . . . . . . . . . . . . . . .15
Using the Menu . . . . . . . . . . . . . . . . . . . .23
3
BD1217 ME4251 user guide [5] 18/7/05 1:20 pm Page 4
Contents
Phone Book Menu . . . . . . . . . . . . . . . . . .23
Storing Entries . . . . . . . . . . . . . . . . . . . . .23
Storing Number in standby mode . . . . .25
Searching Number in Phone Book . . . . .25
Phone Book Groups . . . . . . . . . . . . . . . .26
Speed Dial Numbers . . . . . . . . . . . . . . . .27
Check Phone Book Capacity . . . . . . . . . .28
Emergency Call Numbers . . . . . . . . . . . .29
Area Code . . . . . . . . . . . . . . . . . . . . . . . . .29
Call Log Menu . . . . . . . . . . . . . . . . . . . . .30
Viewing the Calls Log . . . . . . . . . . . . . . .30
Saving Call Log Number
Switching Key Tones On/Off . . . . . . . . .41
Switching Auto Answer On/Off . . . . . . . .42
Giving the Handset a Name . . . . . . . . . .42
Selecting the LCD Mode . . . . . . . . . . . . .43
Resetting your Handset to the
. . . . . . . . . . . . . . . . . . . .43
Default Settings
Handset default Settings . . . . . . . . . . . . .44
Base Setting Menu . . . . . . . . . . . . . . . . . .45
Changing the Ringer Melody . . . . . . . .45
Switching the Base Ringer On/Off . . . . .45
Priority Call Alert . . . . . . . . . . . . . . . . . . .45
Changing the Dial Mode . . . . . . . . . . . . .46
Registering Additional Handsets . . . . . .47
De-register a Handset . . . . . . . . . . . . . . .48
Select a Base to Use . . . . . . . . . . . . . . . .48
Changing the PIN Code . . . . . . . . . . . . . .49
Changing the FlashTime . . . . . . . . . . . .49
Resetting to Default Settings . . . . . . . . .50
to Phone Book . . . . . . . . . . . . . . . . . . . . .32
Deleting a Call Log Number. . . . . . . . . . .33
Deleting All Call Log Entries . . . . . . . . . .33
Timer Menu . . . . . . . . . . . . . . . . . . . . . . . .33
Set Date andTime . . . . . . . . . . . . . . . . . .33
Set the Alarm . . . . . . . . . . . . . . . . . . . . . .34
Silence the Alarm When it Sounds. . . . .35
Function Menu . . . . . . . . . . . . . . . . . . . . . .50
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
WalkieTalkie Mode . . . . . . . . . . . . . . . . .52
Handset Settings Menu . . . . . . . . . . . . . .35
Changing the Ringer Melody . . . . . . . . .35
Changing the Ringer Volume . . . . . . . . .36
Switching the Ringer On/Off . . . . . . . . . .36
Pre Fix Setting . . . . . . . . . . . . . . . . . . . . .37
Call Barring . . . . . . . . . . . . . . . . . . . . . . . .38
Message Waiting . . . . . . . . . . . . . . . . . . .39
Changing the Display Wallpaper . . . . . .40
Changing the Display Language . . . . . .40
Changing the Display Contrast . . . . . . . .41
Quick Reference . . . . . . . . . . . . . . . . . . . .54
Phone Book . . . . . . . . . . . . . . . . . . . . . . .55
Calls log . . . . . . . . . . . . . . . . . . . . . . . . . 56
Timer Menu . . . . . . . . . . . . . . . . . . . . . . .56
Handset Settings . . . . . . . . . . . . . . . . . . .57
Base Settings . . . . . . . . . . . . . . . . . . . . . .59
Function . . . . . . . . . . . . . . . . . . . . . . . . . .61
4
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . .62
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 5
Important Safety Instructions
Follow these safety precautions when using your cordless phone to reduce the risk of
fire, electric shock and injury to persons or property:
Reduce risk of fire and shock by:
1. Keep all slits and openings of the phone unblocked. Do not set the phone on a
heating register or over a radiator. Ensure that proper ventilation is provided at the
installation site.
2. Do not use while wet or while standing in water.
3. Do not use this product near water (for example, near a bath tub, kitchen sink, or
swimming pool).
4. Do not allow anything to rest on the power cord. Place the power cord so that it will
not be walked on.
5. Never insert objects of any kind into the product slits as that may result in fire or
shock.
6. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
7. Do not disassemble this product. If service or repair work is required, contact the
Warranty Service phone number found in the back of this user’s guide.
8. Do not overload wall outlets and extension cords.
9. Avoid using during an electrical storm. Use a surge protector to protect the
equipment.
10. Do not use this cordless phone to report a gas leak, especially if you are in the
vicinity of the gas line.
5
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 6
Unplug this cordless phone immediately from an outlet if:
•
•
•
The power cord or plug is damaged or frayed.
Liquid has been spilled into the product.
The product has been exposed to rain or water. Do not retrieve the handset or base
until after you have unplugged the power and phone from the wall.Then retrieve
the unit by unplugged cords.
•
•
The product has been dropped or the cabinet has been damaged.
The product exhibits a distinct change in performance.
Installation Guidelines
1. Read and understand all instructions and save them for future reference.
2. Follow all warnings and instructions marked on the product.
3. Do not install this product near a bath tub, sink or shower.
4. Operate this phone using only the power source that is indicated on the marking
label. If you are unsure of the power supply to your home, consult with your dealer
or local power company.
5. Do not place this product on an unstable cart, stand or table.This product may fall,
causing serious damage to the product.
6. Adjust only those controls that are covered by the operating instructions. Improper
adjustment of other controls may result in damage and will often require extensive
work to restore the product to normal operation.
7. Clean this product with a soft, damp cloth. Do not use chemicals or cleaning agents
to clean this phone.
6
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 7
8. Use only the power supply that came with this unit. Using other power supplied
may damage the unit.
9. Because cordless phones operate on electricity, you should have at least one phone
in your home that isn’t cordless, in case the power in your home goes out.
10. To avoid interference to nearby appliances, do not place the base of the cordless
phone on or near aTV, microwave oven, or VCR.
Technical Amendments
These Operating Instructions are issued for information purposes.
Their content is not subject of a contract.
All indicated data are merely nominal values.The described equipment and options
may differ depending on requirements which are specific to each country.
7
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 8
Package Contents
ME4251-1
ME4251-2
ME4251-3
ME4251-4
Single Pack Twin Pack Triple Pack Quad Pack
Base station
Handset
Mains Adaptor
Telephone Line Cord
Rechargeable Batteries
(type AAA rechargeable)
1
1
1
1
2
1
2
2
1
4
1
3
3
1
6
1
4
4
1
8
Charger Unit
User’s Guide
0
1
1
1
2
1
3
1
Please check the contents of the package carefully. If something is missing
of has become damaged in transit, you should NOT use the telephone.
In such a case you should return to the dealer with your sales receipt or contact the
Motorola’s distributor directly. (For details, please refer to the Warranty section.)
Note: Retain the packaging of your appliance to prevent it from being damaged should
you ever need to return it.
Setting up the Base Station and Charger Unit
Place the base station and charger unit in an easily accessible location near to a mains
power socket. Make sure that the location is stable and flat and that the surface is
non-slip. Make sure that all cables can be routed so as to prevent people tripping over
them. Furthermore, avoid placing the base station and charger unit too close to other
electronic appliances such as microwaves, PCs or HiFis, for example.
Do not expose the base station and charger unit to direct sunlight or allow them to
become wet.They should not be set up in rooms which are subject to
condensation or corrosive steam or a high concentration of dust (e.g. cellars,
garages or conservatories).The room temperature must be between 0°c and 35°c.
8
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 9
Connecting the Base Station and Mains Adaptor
1. Feed the mains power adaptor cord and the
telephone line cord through the small hole in
the base stand as shown.
2. Insert the telephone line cord into the
corresponding socket on the base station.
3. Connect the mains power adaptor plug in the
corresponding socket on the underneath of
the base station.
4. Attach the base stand to the main part of
the base:
Insert the 2 small plastic tabs on the stand
into the 2 upper slotson the base (as shown).
Holding the stand with one hand on each of
the 2 clips, gently squeeze the clips inwards and down into the lower slots on the
base (as shown).The stand will click into place. Check the stand is secure before
placing on your chosen surface.
5. Connect the mains power adaptor to the mains wall socket and switch the
power on.
6. Connect the telephone line cord to the telephone socket.
The base station is now ready for use.
Note:The base station does not have a power switch.
Only use the mains adaptor supplied with your phone.
9
BD1217 ME4251 user guide [4] 18/7/05
Page 10
Connecting the Charger Unit
Plug the mains adaptor into the wall socket .
The charger unit is now ready to use.
Preparing the Handset(s)
Inserting and Charging the Batteries
Open the battery compartment, by pushing
upwards on the cover.
Insert the 2 x AAA batteries supplied, observing
the correct polarity.
If the batteries are inserted incorrectly
the handset will not operate and there is
also a possibility that the handset
may become damaged.
Push the battery cover back on until you hear it click into place.
Place the handset in the base station/charger unit to charge the batteries.
A confirmation beep and the charging indicator confirm that the handset is charging.
Note: Before first use, the batteries should be allowed to charge for at least 16 hours,
without interruption. If possible, only take the handset out of the base station when
charging is complete. This will help to guarantee optimum operation.
Note: To ensure no interruptions during the initial charging period, you may prefer to
connect the telephone line cord after charging so as not to be disturbed by any
incoming calls.
10
LOW BATTERY WARNING
If the handset batteries are low and need charging you will hear a beep every 30
seconds and the
icon will be displayed.
Attaching a Headset
Note: A headset is not included as standard.
You can connect a headset to your handset.
Lift the small rubber flap on the right side of the handset to reveal the
headset socket. Connect the jack plug into the jack socket.
With a headset connected the handset microphone and receiver
loudspeaker are switched off and all communication is via the headset
earpiece and mouthpiece.
Technical data
Receiver impedance :
Microphone impedance :
Receiver output power :
Plug :
150 ohm
2.2K ohm
20mW
2.5mm headset jack plug
-42dBV/pa
Microphone sensitivity :
11
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 12
Telephone Features
Congratulations on your purchase of this high quality, cordless telephone set.
The set offers the following features:
•
•
•
•
Digital sound quality (DECT)
4K Colour alphanumeric display with icons
16 Polyphonic ringtones
Phone book for 80 names, each with 3
contact numbers
4 Wallpapers (exclusive to Motorola)
Handsfree/Headset operation
Caller ID* function with 40 name/number
call log
•
•
•
•
•
Priority call alert†
Message waiting alert
Emergency call number
9 Speed dial numbers
Separate ringtones for internal/
external/group and page calls
5 Earpiece volume levels
5 Ringer volume levels and ringer mute
5 Base ringtones
Pre-fix dialling
Display clock
Handset name
Big/small display font size
Call duration on display
Automatic call answering on/off
Key input tone on/off
Paging function from base station
to handset
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
11 Display languages
WalkieTalkie Function between Handsets†
Backlit LCD with power save mode
20 Last number redial
Alarm
2 Games – Snake and Guess Number
Microphone mute
Low battery warning tone
Keypad lock
GAP compatible - Operation of up to 6
handsets with ME4251 base Use ME4251
handset on up to 4 bases
Teleconference†
•
•
•
•
Programmable number barring
Up to 100 hours standby
Up to 10 hours continuous talk time
Recall/Pause/Hold
•
•
•
Call forwarding/transfer†
•
Tone and pulse dialling modes
Internal, free communication
† More than one handset required.
between handsets†
* User must subscribe to service via network provider
DECT : Digitally Enhanced Cordless Telephone – Standard for cordless telephones.
GAP : Generic Access Profile – Standard for the Interoperation of handsets and base
stations from other manufacturers.
12
Control Buttons
12
16
14
15
1. Display
8. OFF Key
Use to end a call.
Press to return to standby mode.
13. #/Keypad Lock Key
Press to enter a hash.
Shortcut key to lock/unlock the keypad
2. Left Soft Key (SKL)
Press from standby to view the menu
Press to select and confirm display items.
Use to mute/unmute the microphone.
In games mode, press to pause/play.
Press and hold to switch the power on/off.
14. Page (Find Handset) Key
Press to locate a missing handset/page all
handsets registered to the base.
9. Pause/Voice Message Key
When storing a number, press and hold to
enter a pause.
Shortcut key to activate voice mail in
standby mode.
3. Right Soft Key (SKR)
15. Charging Indicator
Illuminates when handset is charging in the
base station.
Press from standby to access the Phone Book.
Press to go back to the previous menu.
Press to delete an incorrect character/digit.
10. Redial/Flash (Recall) Key
Shortcut key to access Dialled Calls Log.
Flash/Recall - used with some network services.
16. Message Waiting/Incoming call indicator
Illuminates when handset is connected to a
call in the base station.
4. Up Key
Use to scroll up through the menu/display options.
Shortcut key to access Missed Calls Log.
11. INT Key
Press to make an intercom call.
Use to put an external call on hold.
17. Charge contacts
5. Down Key
Use to scroll down through the menu/display items.
Shortcut key to access Received Calls Log.
12. * Key
Press to enter an asterisk.
Shortcut key to switch from Pulse to DTMF
dialing mode.
6. External Call Key
Use to make an external call.
7. Handsfree/Speaker Key
13
Use to activate/de-activate handsfree.
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 14
Display Icons
Signal icon
Disappear if the handset moves out of
communication range with the base.
Keypad lock is active.
Key lock icon
Line in use icon
Alarm icon
Indicates that the line is in use.
Alarm is set.
Ring icon
External ring volume is set to on.
Shows the battery charge level.
External ring volume is set to off.
Base not connected with PSTN.
Microphone is muted.
Battery icon
No ring icon
No Line icon
Mic mute icon
Message waiting icon Indicates that there is message waiting.
Menu Icons
Phonebook icon
Phonebook in use.
Call log in use.
Time being set.
Call log icon
Timer icon
Handset settings icon Used to access handset settings.
Base settings icon
Function icon
Used to access base settings.
Used to indicate other available functions.
Display Backlight
The backlight on your handset display comes on when any key is pressed.The light
remains on for 15 seconds after the last button press if you selected ‘power save
mode’ or for 30 seconds if you selected ‘extended mode’. The backlight also comes
on when you receive an incoming call (and goes out 3 seconds after the call ends)
and when the alarm time is up (the light comes on for 5 seconds).
14
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 15
Menu Structure
Handset settings
1. RingType
2. Ring Volume
3. Ring On/Off
4. Pre Fix
5. Outgoing Call Bar
6. Message Waiting
7. Wallpaper
8. Language
9. Contrast
10. KeyTone
11. Auto Answer
12. Handset Name
13. LCD Mode
14. Default
Base settings
1. Base RingTone
2. Base Ring On/Off
3. Priority Call Alert
4. Dial Mode
Phone book
1. Search
2. Add
3. Group
4. Speed Dial
5. Check
6. Emergency Call
7. Area Code
Call log
1. Missed Call
2. Received Call
3. Dialed Call
4. Delete
Timer
1. Clock
5. Register
6. De-register
7. Select Base
8. System PIN
9. FlashTime
10. Default
Function
1. Games
2. WalkieTalkie
2. Alarm
Navigating the menu
In standby mode:
Press the SKL key to open the main menu and display the first menu option.
When you access a sub-menu the relevant menu icon will be displayed.
Press the
or
key to scroll through and display all the available sub-menus.
Press the SKL key to select the currently displayed option. Or
15
Press the SKR key to go back to the previous display.
BD1217 ME4251 user guide [4] 18/7/05
Page 16
Using theTelephone
Note: If the handset is in the base station or charger unit, only the
key will function.
key and
Lift the handset out of the base station/charger unit for use.
Switching the handset On/Off
When the handset is put in the base station/charger unit it switches on automatically
and charges up.
Allow the batteries to charge for 16 hours without interruption before first use.
To switch the handset off:
1. In ON mode, press and hold the
To switch the handset on:
1. In OFF mode, press and hold the
key for 2 seconds.
key for 2 seconds.
Making External Calls
There are two ways to dial a number: direct dialling or on-hook dialling.
Whenever the line is in use the
icon is displayed.
If another internal handset is already engaged on an external call, the
displayed. No further calls can be made until this call is ended.
Handset range
icon will be
If the handset moves out of communication range with the base station,
the display will show Out Of Range and the
icon will disappear.
16
BD1217 ME4251 user guide [5] 18/7/05 1:20 pm Page 17
Direct dialling
1. Press the
key and wait for the dialling tone.
2. Dial the telephone number and complete the call.
When the call is connected, the call duration will be displayed and will remain in the
display until 3 seconds after the call is ended.
The call timer format is HH:MM:SS.
3. Press the
key to end the call.
On-hook dialling (pre-dialling)
1. Dial the telephone number.
2. Delete any incorrect digits by pressing the SKR key.
3. Press the
key.The displayed number is dialled.
4. To end the call, press the
key.
Using the Handsfree Speakerphone
In handsfree mode, all communication is via the handset speakerphone and
microphone, leaving your 'hands free'.
You can make a call handsfree or switch to handsfree during a call.
Make a handsfree call
In standby mode:
1. Dial the telephone number and press the
2. Press the key and wait until the handset speaker comes on, then dial the
telephone number as required.
key.The handset speaker comes on.
3. Hold your conversation - speak to the caller through the microphone and listen
over the speaker.
17
4. Press the
key to end the call.
BD1217 ME4251 user guide [4] 18/7/05
Page 18
During a call:
1. Press the
key. The handset speaker comes on.
Place the handset back in the base station/charger unit. The call will disconnect
and go back to standby status.
2.
3. Press the
key to end the call.
Taking calls
When an external call is received, all registered handsets ring and the LCD backlight
comes on for 15 seconds after call is picked up by the handset.
The display shows Incoming call. The green incoming call light on the base flashes.
Note: If you have subscribed to caller ID, the caller's name or number will be shown
(if available from the network).
Handset is in the base station/charger (auto-answer):
If auto-answer is set to on, the line will be automatically connected when you lift the
handset from the base/charger.
1. Lift the handset to answer the call.
Note: If auto-answer is set to off, lift the handset and press the
to answer the call.
key or the
key
Handset is not in the base station/charger:
1. Press the
key or the
key to answer the call.
Prefix Dialling
When prefix dialling is set to ON, the prefix number that you set will be dialled out
first whenever you make an external call. The prefix can be a number up to 5 digits.
You can use the prefix memory to store an area code that you frequently use, for
example 0207 or 08457, to save you dialling it each time you make a call.
18
BD1217 ME4251 user guide [5] 18/7/05
Page 19
See page 37 for details on how to store a prefix number.
Dialling from the Phone Book
Note:To store a number in the Phone Book, see "Storing entries" on page 23.
In standby mode:
1. Press the SKR key to enter the phone book.
Note: If the phonebook is empty, Empty will be displayed for 2 seconds.
2. The first entry in the phone book is displayed. Press the
entry you want.
or
key to display the
3. Press the
4. Press the
key to dial the number.
key to end the call.
Holding and Forwarding Calls
If the telephone is connected to a switchboard/PBX network, it is possible to put calls
on hold and forward them to other extensions.
1. Press the
key to put the call on hold.
2. Enter the extension number you want.The called extension will ring.
3. Press the
Press
key to transfer the call. Or
to return to the caller, if the called extension does not answer.
Calling with MoreThan One Handset
Note:To make/receive internal calls, transfer calls or hold a teleconference you need to
have more than one handset registered to your base station.
19
BD1217 ME4251 user guide [5] 18/7/05
Page 20
Making Internal Calls
With more than one handset registered to the same base as you, you can make
internal calls between handsets.
To call another internal handset:
1. Press the
key.
or key to display the handset you want to call and press the
key.
2. Press the
key or
The called handset will ring and show the caller's handset number.
When the other handset answers hold your conversation.
3. Press the
key to end the call.
Receiving Internal Calls
When you receive an internal call, the handset will ring and show the calling handsets
number, and the backlight will come on for 15 seconds after call is picked up by the
handset.
1. Press the
key or the
key to answer the call.
2. Press the
key to end the call.
Transferring/Forwarding a Call to Another Handset
To transfer/forward an external call to another internal handset.
1. Press the
2. Enter the internal handset number you want.The called handset will ring.
3. When the handset answers, press the key to transfer the call. Or
If the called handset does not answer, press the key to forward the call.
After 30 seconds the call will ring back at your handset if the call is still not
answered. Press the key to speak to the caller.
key to put the external call on hold.
20
BD1217 ME4251 user guide [5] 18/7/05
Page 21
Teleconference
If you are already on an external call, it is possible to include another internal handset
in the conversation and hold a three-way conference call.
1. Press the
key to put the external call on hold.
2. Enter the internal handset number you want to include in the call.
The called handset will ring.
3. When the handset answers, press the 3 key to begin the teleconference.
4. Either internal handset can press the
key at any time to leave the teleconference.
The other internal handset will remain connected to the external call.
Paging Handsets
If you cannot locate a handset you can use the page key on the base to help find it.
1. Press the Page key on the base.
All handsets registered to the base will ring and the display on each handset will
show Paging.
2. To stop the paging ring, press the Page key on the base again, or press any key on the handset.
Note: All paged handsets will stop ringing if any key on the handset or page key on
the base is pressed.
Muting the Microphone
During a call (internal or external), you can mute the microphone so your caller cannot
hear you while you speak privately to someone else in the room.The
displayed when the microphone is muted.
icon is
During a call:
1. Press the SKL key to mute/unmute the microphone.
21
BD1217 ME4251 user guide [4] 18/7/05
Page 22
Key Lock
You can use the key lock to prevent accidental button presses activating the
handset. When the key lock is on, the icon is displayed.
You will still be able to make calls to the emergency
numbers when the key lock is on.
In standby mode:
1. Press and hold the #
key to lock/unlock the keypad.
Note: When the key lock is on, the # and
keys will still function and you will be able
to accept an incoming call and turn off the alarm.
Shortcut Keys
The ME4251 telephone has three shortcut keys:
,
, and
.
When pressed in standby mode, each key will give you automatic access to a different
telephone function.
In standby mode:
Press the
(See page 30-32 for more information on the missed call log.)
Press the key to view the received call log.
(See page 30 for more information on the received call log.)
press key to access message waiting server.
(See page 39 for more information on the message waiting server.)
key to view the missed call log.
22
BD1217 ME4251 user guide [5] 18/7/05
Page 23
Using the Menu
The menu can only be accessed from standby mode.
Navigating your way around the menu
For the full menu structure and information on navigating your way around the menu,
see page 15.
In this section you will find instructions on how to use the following menus:
Phone book, Call log,Timer, Handset settings, Base settings and Function menu.
PHONE BOOK MENU
When using the phone book, the
icon will be displayed.
The phone book stores up to 80 contact names - for each contact name you can store
3 different contact numbers, for example: home, office and mobile numbers.
Once you have stored your names and numbers, you can sort your contacts into caller
groups and assign each caller group a different ringtone. Caller groups make searching
for contacts easier and you can tell if a call is, for example, from a friend or a work
colleague just by hearing the ringtone There are 6 pre-set caller groups: VIP, Business,
Family, Friends, School and Others.You can edit the caller group names if you wish.
Storing Entries
There are two ways to store a phone book entry: Using the Phone book menu and
from standby mode.
Using the phone book menu:
1. Press the
or
key until Add is displayed and press the SKL key to select.
Note: If the phone book is full Memory full will be displayed for 2 seconds,
then the display reverts to the previous menu screen.
2. Enter a contact name (max. 16 characters) and press SKL to confirm.
23
BD1217 ME4251 user guide [5] 18/7/05
Page 24
Entering Names and Numbers
To enter characters, press the relevant key the corresponding number of times
according to the position on the key. For example, to enter an L, press the 5 key three
times or to enter a B press the 2 key twice.
Delete incorrect digits by pressing the SKR key.
Press the * key to switch between lower/upper case and number only entry.
If 2 consecutive characters are on the same key, enter the first character, then wait for
the cursor to move to the right before trying to enter the next character.
#
Press the 1 key or
key repeatedly to enter punctuation symbols.
Press the 0 key twice to enter a space.
3. Enter the first number for this name (max. 24 digits) and press SKL to confirm.
4. Repeat point 3 to enter 2 further numbers for the name.
Or
If you do not want to enter any further contact numbers, press SKL twice to go
directly to the 'Set Group' menu.
Entering a Dialling Pause (P)
If the telephone is connected to a switchboard/PBX network, it may be necessary to
insert a pause in the dialling sequence.
When entering a number, press and hold the
A "P" will be displayed.
key where a pause is required.
5. Press
Save ok is displayed and then the list of phone book entries is displayed.
6. Press the key to return to standby mode.
or
to select a caller group and press SKL to select.
24
BD1217 ME4251 user guide [5] 18/7/05
Page 25
Storing a number from standby mode:
1. Enter the telephone number you want to store and press SKL to save the number.
2. Select a location to store the number (e.g. Number 1) and press the SKL key to confirm.
3. Enter the name and press the SKL key.
4. Press
or
to select the caller group where you want to store the name/number
and press the SKL key to confirm.
Save ok is displayed and then return to standby mode.
5. Press the
key to return to standby mode.
Search for a Number in the Phone Book
Any time during a call, you can press SKR to view the phonebook.
In the phone book menu:
1. Search is displayed, press the SKL key to select.
2. Enter the first letter of the name you want and press the SKL key.
The first phone book entry beginning with this letter will be displayed.
Note: For quick searching, you can enter more than one letter of the name you want.
Note: If the phone book is empty, Empty will be displayed.
3. Press
Note:To change the details of the displayed entry
Press or to scroll to the part of the entry you want to edit (for example, scroll to
or
to search for the exact entry and press SKL to see the entry details.
the first telephone number) and press the SKL key.The display will show eg. Edit No. 1,
press the SKL key to confirm. Edit the name/number, using the SKR key to delete
incorrect digits/characters and the keypad to enter new ones. Press the SKL key to
confirm and save the edited details.
25
4. Press the
key to return to standby mode.
BD1217 ME4251 user guide [4] 18/7/05
Page 26
Phone Book Groups
Your phone book names and contact numbers are stored in smaller, more
manageable caller groups. There are six pre-set groups - VIP, Business, Family,
Friends, School and Others.
To display the contacts stored in a particular group:
In the phone book menu:
1. Press the
2. Press the
3. Press the
or
or
or
key until Group is displayed and press the SKL key to select.
key to display the name of the group you want and press SKL.
key to display either View or Edit Name.
If you select View:
The list of entries stored in the chosen group will be displayed. Use the
or
key to
scroll to the entry you want, and the SKL key to view details for the displayed entry.
To change the details of the displayed entry
Press the
or
keys to scroll to the part of the entry you want to edit (for example,
scroll to the first telephone number) and press the SKL key. The display will show (for
example) Edit No. 1 , press the SKL key to confirm. Edit the name/number, using the
SKR key to delete incorrect digits/characters and the keypad to enter new ones. Press
the SKL key to confirm and save the edited details.
If you select Edit Name:
You can change the name of the group to another name of your choice.
Use the SKR key to delete incorrect characters/digits and enter new ones using the
keypad. When the group name is edited, press SKL to confirm. Save ok is
displayed.
4. Press the
key to return to standby mode.
26
BD1217 ME4251 user guide [5] 18/7/05
Page 27
Speed Dial Numbers
Your Motorola telephone has 9 speed dial keys (keys 1- 9).You can select any of the
numbers stored in the phonebook and save them on a speed dial key. Once stored,
from standby mode you can press and hold the speed dial key you want and the
number will be dialled out automatically.
Speed dial numbers can be up to 24 digits.
Store a Speed Dial Number
In the phone book menu:
1. Press the
to select.
or
key until Speed Dial is displayed and press the SKL key
Key 1 is displayed with details of the stored name/number
or
Empty is displayed if no name/number has been allocated.
2. Press the
to confirm.
3. Phone Book is displayed, press the SKL key to access the phone book list.
or
key to display the speed dial key you want and press the SKL key
4. Press the
or
key to select the name of the contact that you want to store on
the speed dial key and press the SKL key to confirm.
Save ok is displayed, then the details now saved on the speed dial key.
5. Press the
key to return to standby mode.
27
BD1217 ME4251 user guide [5] 18/7/05
Page 28
Delete a Speed Dial Number
In the phone book menu:
1. Press the
or
key until Speed Dial is displayed and press the SKL key to select.
2. Press the
to confirm.
3. Press the
or
key to display the speed dial key you want and press the SKL key
key to select Delete then press the SKL key.
Delete? is displayed.
4. Press the SKL key to confirm. Deleted is displayed.
5. Press the
key to return to standby mode.
Check Phone Book Capacity
You can use the 'Check' sub-menu to check how many phone book entries you
have stored.
In the phone book menu:
1. Press the
or
key until Check is displayed and press the SKL key to select.
2. The display will show, for example, Used 25 Total 80.
Where 25 phone book locations have been used, and 55 are still available to store
new contact details.
3. Press the
key to return to standby mode.
Note: If the phone book is empty, Empty will be displayed.
28
BD1217 ME4251 user guide [5] 18/7/05
Page 29
Emergency Call Numbers
You can store 4 emergency call numbers which can be dialled out at any time even
when call restrictions are set (for example, if the keypad is locked or call barring is set).
Each emergency number can have a maximum of 5 digits.
Example: If you set 123 as an emergency number - only number 123 can diales out
with call restrictions set.
If you dial any of the emergency numbers manually (instead of using the
phone book) and the keypad lock is on or call barring is set, they will still be
dialled out.
In the phone book menu:
1. Press the
to select.
or
key until Emergency Call is displayed and press the SKL key
2. Press the
or
key to select one of the emergency number locations and press
the SKL key to confirm.
3. Enter the emergency number up to 5 digits and press the SKL key to confirm.
Save ok is displayed.
Note:To edit an existing emergency number, use the SKR key to delete digits and the
keypad to enter new ones.
4. Press the
key to return to standby mode.
Area Code
If the area code is set, when you make an external call using the on-hook dialling (pre-
dial) mode, if you enter the area code in the former digits, the area code will be cut
and will not be dialled. For example, if the area code is 0755, and you enter
0755123456, only 123456 will be dialled.
29
BD1217 ME4251 user guide [5] 18/7/05 1:20 pm Page 30
The area code can be a maximum of 5 digits.
In the phone book menu:
1. Press the
to select.
or
key until Area Code is displayed and press the SKL key
2. Press the SKL key again, then enter an area code (up to 5 digits) and press the SKL
key to confirm. Save ok is displayed.
3. Press the
key to return to standby mode.
Call Log Menu
There are three types of call log: Missed Calls, Received Calls, and Dialed Calls.
Each log can contain up to 20 records.
When using the call log the
icon will be displayed.
Unanswered calls/calls that have been received in your absence are stored in the
Missed calls log.
Calls you have answered are stored in the Received calls log.
Calls you have made are stored in the Dialled calls log.
Viewing the Call Logs
Note: If there are no calls stored in a call log, Empty will be displayed and then the
display will automatically return to the main menu.
Note:The max number of digits for a stored call log number is 24.
You can view the call logs using the menu or using the shortcut keys.
If you have new calls in the Missed calls log you will also be able to view them from
standby mode.
30
BD1217 ME4251 user guide [5] 18/7/05
Page 31
Viewing the call logs using the menu:
In the call log menu:
1. Press the
or
key to display the call log you want and press the SKL key to select.
2. Press the
key to scroll and view all call log entries.
3. With a call highlighted, press the SKL key to view the call details.
For each call, the caller's number and date and time of the call are displayed.
If the caller's number is stored in the phone book and an exact name/number match
is found, the caller's name will also be displayed.
4. Press the SKR key to return to the calls log and view the other calls.
5. Press the
key to return to standby mode.
Viewing the call logs using the shortcut keys:
From standby mode:
1. Press the
Or
key to display the Missed calls log.
Press the
Or
key to display the Received calls log.
Press the
key to display the Dialed calls log.
2. Press the
key to scroll and view all call log entries.
3. With a call highlighted, press the SKL key to view the call details.
For each call, the caller's number and date and time of the call are displayed.
If the caller's number is stored in the phone book and an exact name/number match
is found, the caller's name will also be displayed.
31
BD1217 ME4251 user guide [5] 18/7/05
Page 32
4. Press the SKR key to return to the calls log and view the other calls.
5. Press the key to return to standby mode.
View ing the m issed call log from standby m ode:
When there are calls in the Missed calls log, the standby display shows, for example,
2 Missed Calls.
1. Press the SKL key to view the details of the most recent missed call.
The caller's number (and name if an exact name/number match is found in the
phone book) and date and time of the call are displayed.
2. Press the
key to scroll and view all missed calls.
With a call highlighted, press the SKL key to view the call details.
Press the SKR key to return to the calls log and view the other calls.
Note: If a caller has rung on more than one occasion, each call will be listed with
the different times they called.
3. Press the
key to return to standby mode.
Saving a Call log Num ber to the Phone Book
With the call details displayed:
1. Press the SKL key, Save is displayed.
2. Press the SKL key to confirm.
3. Press the
or
key to choose a location to store the number
key.
(e.g. Number 1) and press the
SKL
4. Enter a name and press the SKL key to confirm.
5. Press the or key to choose set group you want and press the
the entry, Save OK is displayed, then return to previous menu.
Press the key to return to standby mode.
SKL
key to store
6.
32
BD1217 ME4251 user guide [5] 18/7/05
Page 33
Deleting a call log number
With the call details displayed:
1. Press the SKL key, then press the
key to highlight Delete.
2. Deleting is displayed briefly, then Deleted!.The display then reverts to show the
next calls log entry.
3. Press the
key to return to standby mode.
Delete all Calls Log Entries
In the calls log menu:
1. Press the
or
key to display Delete and press the SKL key .
2. Press the
or
key to highlight the calls log you want to delete or highlight
Delete All to delete the entries from all 3 call logs and press the SKL key to
confirm. Deleting is displayed briefly, then Empty!
3. Press the
key to return to standby mode.
TIMER MENU
The timer menu lets you set the handset clock and set an alarm.
When using the timer the
icon will be displayed.
Set the Date andTime
You can use the clock menu to set the correct date and time on your handset.
Your ME4251 telephone uses the 24 hour clock.
In theTimer menu:
1. Press the
or
key to display Clock and press the SKL key to confirm.
33
BD1217 ME4251 user guide [4] 18/7/05
Page 34
2. Enter the date using 2 digits for the day, 2 for the month and 4 for the year and
press the SKL key to confirm.
Example, for 17th July 2005: enter 1, 7, 0, 7, 2, 0, 0, 5.
3. Enter the time using 2 digits for the hour and 2 for the minute and press the SKL
key to confirm.
Example, for 2:45pm: enter 1, 4, 4, 5.
Set ok is displayed.
4. Press the
key to return to standby mode.
Set the Alarm
You can set the alarm on your handset to ring once, to ring at the same time every
day, to ring weekday at a set time, or you can switch the alarm Off.
You can select from 16 different ringer melodies and 5 different ring volumes for
the alarm.
When the alarm is set the
icon is displayed.
In theTimer menu:
1. Press the
or
key to display Alarm and press the SKL key to confirm.
2. On/Off is displayed, press the SKL key to begin setting the alarm.
3. Press the
or
key to display Off, Once, Everyday or Weekday and press
the SKL key to confirm.
4. Enter the time you want the alarm to sound using 2 digits for the hour and 2 digits
for the minute and press the SKL key to confirm. Set ok is displayed briefly.
Note: Remember that your ME4251 uses the 24 hour clock.
34
BD1217 ME4251 user guide [5] 18/7/05
Page 35
5. Press the SKR key once to go back to the previous menu and set the ringer melody.
6. Press the
key to display Ring Type and press the SKL key to confirm.
7. Press the
or key to display and hear a sample of each of the ringer
melodies. With the melody you want highlighted, press the SKL key to select.
Set ok is displayed briefly .
8. Press the SKR key once to go back to the previous menu and set the ring volume.
9. Press the
key to display Ring Volume and press the SKL key to confirm.
10. Press the
key to increase or the key to decrease the volume and press the SKL
key to select. Set ok is displayed briefly.
11. Press the
key to return to standby mode.
Silence the Alarm When it Sounds
When the alarm time is up, the alarm will sound for 30 seconds.
To silence the ring:
1. Press any key on the handset.
HANDSET SETTINGS MENU
The handset settings menu lets you personalise the settings on your handset.
When using the handset settings menu the
icon will be displayed.
Changing the Ringer Melody
You can select different ringer melodies to help you to distinguish between the
different types of call you receive.You can set a different ringer melody for external
call, internal call, each of your 6 phone book groups and for the Page ring.
35
BD1217 ME4251 user guide [4] 18/7/05
Page 36
In the handset settings menu:
1. Press the
or
key to display Ring Type and press the SKL key to confirm.
2. Press the
confirm.
or
key to display the Ring Type you want and press theSKL key to
3. Press the
or
key to scroll and hear the ringer melodies, with the one you want
highlighted, press the SKL key to select. Set ok is displayed.
4. Press the key to return to standby mode.
Changing the Ringer Volume
For each of the different ring types you can set your preferred ringer volume level.
There are 5 different volume levels.
In the handset settings menu:
1. Press the
or
key to display Ring Volume and press the SKL key to confirm.
2. Press the
or
key to display the ring volume you want and press the SKL key
to confirm in changing the ringer volume operation.
3. Press the
key to increase or the
key to decrease the volume and press the SKL
key to confirm. Set ok is displayed.
4. Press the
key to return to standby mode.
Switching the Ringer On/Off
If you do not want to be disturbed by either external or internal calls you can switch
the ringer off.
If the external ringer is set to on, the
icon is displayed.
36
BD1217 ME4251 user guide [5] 18/7/05 1:20 pm Page 37
If the external ringer is set to off, the
icon is displayed.
In the handset settings menu:
1. Press the
or
key to display Ring On/Off and press the SKL key to confirm.
2. Press the
or
key to display either:
External On/Off for the external ringer
Or
Internal On/Off for the internal ringer
Press the SKL key to confirm.
3. Press the
or
key to display (for example) either Internal On or Internal Off
and press the SKL key to confirm. Set ok is displayed.
4. Press the
key to return to standby mode.
Pre Fix Setting
When Pre Fix dialing is on, it will append the entered Pre fix number to the front of the
dialing number.
Switching pre fix ringing On/Off
In the handset settings menu:
1. Press the
2. Pre Fix On/Off is displayed, press the SKL key to select.
3. Press the or key to highlight either Off or On and press the SKL key to select.
or
key to display Pre Fix and press the SKL key to select.
Storing a pre fix number
In the handset settings menu:
1. Press the
or
key to display Pre Fixand press the SKL key to select.
37
BD1217 ME4251 user guide [4] 18/7/05
Page 38
2. Press the
key to display Pre Fix Edit and press the SKL key.
3. Enter a prefix number (max. 5 digits) and press the SKL key to confirm. Set ok
is displayed.
To edit an existing prefix number:
Delete existing digits using the SKR key and enter a new prefix number and
press SKL to confirm.
4. Press the
key to return to standby mode.
Call Barring
You can select from various call barring options:
Off - no calls are barred, all calls are allowed.
External Call - all external calls are barred, only internal calls are allowed.
Pre Call - calls beginning with a selected prefix will be barred.
All - all calls are barred, no calls are allowed.
Note: With call barring set, when you try to dial a barred number, the display will show
Call is barred. You will need to change the call barring setting to be able to dial out.
In the handset settings menu:
1. Press the
to select.
or
key to display Outgoing Call Bar and press the SKL key
2. Enter the 4 digit PIN code (pre-set code 0000) and press the SKL key to confirm.
3. Press the
or
key to display the call barring option you want and press the
SKL key to confirm.
If you selected Pre Call:
Enter the barred prefix number (up to 5 digits) and press the SKL key to confirm.
Set ok is displayed.
38
BD1217 ME4251 user guide [4] 18/7/05
Page 39
If you do not enter a number for Pre Call barring, All calls will be barred
as no number will match a 'blank'.
4. Press the
key to return to standby mode.
Message Waiting
If you have subscribed to a voice messaging service, the green message light on the
base will flash to alert you if you have a message waiting.
To hear your messages, contact your voice messaging service provider.
Note: For quick dialling you can store the voice messaging service number on
your phone.
To store/dial the voice messaging service number
In the handset settings menu:
1. Press the
to select.
or
key to display Message Waiting and press the SKL key
2. Press the
key to display Service and press the SKL key to confirm.
3. Enter the number of your messaging service provider and press the SKL key to
confirm. Set ok is displayed.
4. Press the
Or
key to dial the number.
Press the
key to return to standby mode.
Note: in standby mode, user can press
key to dial the service number.
39
BD1217 ME4251 user guide [5] 18/7/05
Page 40
To clear messages
When you have listened to your messages, to turn off the flashing message light:
In the handset settings menu:
1. Press the
to select.
or
key to display Message Waiting and press the SKL key
2. Press the
key to display Clear Message and press the SKL key to confirm.
3. Press the
key to return to standby mode.
Changing the Display Wallpaper
Your ME4251 telephone has a choice of 4 wallpapers that will be shown on the handset
display when in standby mode.
Note: If you select the wallpaper with the Motorola logo, the handset name will be
displayed but it will not cover the logo.
In the handset settings menu:
1. Press the
or
key to display Wallpaper and press the SKL key to select.
2. Press the
or
key to select the wallpaper you want and press the SKL key to
view the wallpaper.
3. Press the SKL key again to confirm.
4. Press the
key to return to standby mode.The selected wallpaper is displayed.
Changing the Display Language
The text on the handset display can be shown in up to 11 different languages,
including: English, German, French, Italian, Dutch, Spanish, Greek,Turkish,
Hungarian, Portuguese, and Polish.
40
BD1217 ME4251 user guide [5] 18/7/05
Page 41
In the handset settings menu:
1. Press the
2. Press the or key to display the language you want and press the SKL key to confirm.
3. Press the key to return to standbymode.The display will show the selected language.
or
key to display Language and press the SKL key to select.
Changing the Display Contrast
There are 5 different contrast levels for the handset display.
In the handset settings menu:
1. Press the
or
key to display Contrast and press the SKL key to select.
2. Press the
to confirm.
3. Press the
or
key to select the contrast level you want and press the SKL key
key to return to standby mode.
Switching KeyTones On/Off
With key tones set to on, each time you press a key on the handset, you will hear a
beep to confirm the button press.
In the handset settings menu:
1. Press the
or
key to display Key Tone and press the SKL key to select.
2. Press the
or
key to select either Key Tone On or Key Tone Off and press
the SKL key to confirm. Set ok is displayed.
3. Press the key to return to standby mode.
41
BD1217 ME4251 user guide [5] 18/7/05
Page 42
Switching Auto Answer On/Off
The automatic call answering function (auto answer on) enables an incoming call to be
taken immediately when the handset is lifted from the base station (or charger unit).
It is not necessary to press the
or
key.
When auto answer is off, you will need to press the
key or the
key to take a call.
In the handset settings menu:
1. Press the
2. Press the
or
or
key to display Auto Answer and press the SKL key to select.
key to select either On or Off.
and press the SKL key to confirm. Set ok is displayed.
3. Press the key to return to standby mode.
Giving the Handset a Name
You can assign a name to each handset that will be displayed when the handset is in
standby mode.
In the handset settings menu:
1. Press the
or
key to display Handset Name and press the SKL key to select.
2. Enter a name for your handset and press the SKL key to confirm.
Set ok is displayed.
The handset name cannot include punctuation symbols.
See page 24 for help with entering names.
3. Press the
key to return to standby mode.
42
BD1217 ME4251 user guide [5] 18/7/05
Page 43
Selecting the LCD Mode
The display backlight comes on whenever a key is pressed or an incoming call is
received.
You can determine how long the backlight stays on after the last button press:
In 'Power Save Mode' the backlight will remain on for 15 seconds.
In 'Extended Mode' the backlight will remain on for 30 seconds.
In the handset settings menu:
1. Press the
to select.
or
key to display LCD Mode and press the SKL key
2. Press the
or
key to display the mode you want and press the SKL key to
confirm. Set ok is displayed.
3. Press the
key to return to standby mode.
Resetting your Handset to the Default Settings
You can reset your handset so that all the pre-set (default) settings
are restored.
In the handset settings menu:
1. Press the
or
key to display Default and press the SKL key to select.
2. Confirm? is displayed, press the SKL key to confirm. Set ok is displayed.
Press the SKR key to cancel.
3. Press the
key to return to standby mode.
43
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 44
Handset Default Settings
External Ringer Melody
Internal Ringer Melody
VIP Ringer Melody
Canon
Prefix On/Off
OFF
Espresso
High_Tide
Prefix Number
Empty
Number of Message Service Empty
Business Ringer Melody
Family Ringer Melody
Friends Ringer Melody
School Ringer Melody
Others Ringer Melody
Paging Ringer Melody
Ringer Volume
Higher_Plane Wallpaper
Wallpaper 1
English
Level 3
Jubilation
Maple_Leaf
Vivaldi
Language
LCD Contrast
KeyTone
ON
Nightlife
Auto Answer
ON
One_Moment Handset Owner Name
ME4251
Extended Mode
Empty
Level 4
Level 3
ON
LCD Mode
Speed Dial
Receiver Volume
External Call Ring On/Off
Internal Call Ring On/Off
ON
44
BD1217 ME4251 user guide [5] 18/7/05
Page 45
BASE SETTINGS MENU
The base settings menu lets you personalise the settings on your base station.
When using the base settings menu the
icon will be displayed.
Changing the Ringer Melody
You can select from 5 different base ringer melodies.
In the base settings menu:
1. Press the
or
key to display Base Ring Tone and press the SKL key to select.
2. Press the
or
key to select the melody you want and press the SKL key to
confirm. Set ok is displayed.
3. Press the key to return to standby mode.
Switching the Base Ringer On/Off
In the base settings menu:
1. Press the
to select.
or
key to display Base Ring On/Off and press the SKL key
2. Press the
or
key to select either On or Off and press the SKL key to confirm.
Set ok is displayed.
3. Press the
key to return to standby mode.
Priority Call Alert
With more than one handset registered to the base station, you can use priority call
alert to select a particular handset to have priority over the other handsets.This
handset will ring first when there is an incoming call.You can also determine whether
you want the handset to ring 2, 4 or 6 times before all the other handsets start to ring.
45
BD1217 ME4251 user guide [5] 18/7/05
Page 46
If you want all handsets to ring and no handset to have priority, select All.
In the base settings menu:
1. Press the
or
key to display Priority Call Alert and press the SKL key to select.
2. Press the
or
key to select the handset you want to ring first and press the SKL
key to confirm.
3. Press the or
key to select the number of times the handset will ring before the
other handsets start to ring (for example, for 4 times, select Ringtimes 4) and press
the SKL key to confirm. Set ok is displayed.
4. Press the
key to return to standby mode.
Changing the Dial Mode
Your ME4251 telephone uses DTMF (Tone dialling) as the pre-set dialling mode.
When using your telephone with some switch boards/PBX networks you
may be required to change to PULSE dialling.
Note: Consult your switchboard provider if you are unsure which mode to use.
In the base settings menu:
1. Press the
or
key to display Dial Mode and press the SKL key to select.
2. Press the
or
key to select either DTMF or Pulse and press the SKL key to
confirm. Set ok is displayed.
3. Press the
key to return to standby mode.
46
BD1217 ME4251 user guide [5] 18/7/05
Page 47
Registering Additional Handsets
Your ME4251 handset can be registered for use with up to 4 different base stations.
A maximum of 6 handsets can be registered to use with your ME4251 base station.
Note: Any additional handsets must be GAP compatible. Even if a handset meets GAP
standards, it is still possible some handset functions will not be available.
To register a new handset to your ME4251 base, you need to put the base into
registration mode:
At the base:
1. Press and hold the Page key.The base will beep twice and the red light will flash for
one minute.
On the handset, in the base settings menu:
1. Press the
to select.
or
key to display Register and press the SKL key
2. Press the
or
key to select the number of the base you want to register the
handset to and press the SKL key to confirm.
Note:The base stations that your handset is already registered to will be
indicated by **.
3. Enter the handset PIN code and press the SKL key to confirm.
If the correct PIN is entered, the handset displays Searching while it attempts
to connect with the base station. If registration is successful, OK
is displayed.
4. Press the
key to return to standby mode.
Once the registration procedure is complete, the new handset will automatically
be allocated the next available handset number.This number will be shown on
the display.
47
BD1217 ME4251 user guide [5] 18/7/05
Page 48
De-register a Handset
You can use one handset to de-register another handset registered to the same base.
In the base settings menu:
1. Press the
or
key to display De-register and press the SKL key to confirm.
2. Enter the handset PIN code (pre-set code 0000) and press the SKL key to confirm.
3. Press the
or
key to highlight the number of the handset you want to
de-register and press the SKL key to confirm. Confirm? is displayed.
4. Press the SKL key to select. OK is displayed.
5. Press the
key to return to standby mode.
Select a Base to Use
If your handset is registered to more than one base, you can select which base you
want to use.
If you select Auto Base - your handset will automatically use the base with the
best reception.
In the base settings menu:
1. Press the
or
key to display Select Base and press the SKL key to select.
2. Press the
or
key to select the number of the base you want to use or to select
Auto Base and press the SKL key to confirm. OK is displayed.
Note:The base stations that your handset is registered to will be indicated by **.
3. Press the
key to return to standby mode.
48
BD1217 ME4251 user guide [5] 18/7/05
Page 49
Changing the PIN Code
For increased security you may want to change the PIN code to prevent any
unauthorised changes being made to the settings on your telephone.
Always keep a note of the new PIN code.
In the base settings menu:
1. Press the
or
key to display System PIN and press the SKL key to select.
2. Enter the current PIN (pre-set code 0000) and press the SKL key to confirm.
3. Enter a new 4-digit PIN code and press the SKL key.
4. Re-enter the new PIN code and press the SKL key to confirm.
Set ok is displayed.
5. Press the
key to return to standby mode.
Changing the FlashTime (Recall)
You can change the recall (flash) time according to your Switchboard/PBX
requirements. The recall times you can set are: 100, 250 and 600 msec.
The pre-set recall time is 100 msec.
Note: Consult your switchboard/PBX provider for advice if unsure which setting
you need.
In the base settings menu:
1. Press the
or
key to display Flash Time and press the SKL key to select.
2. Press the
or
key to select 100, 250 or 600 and press the SKL key to confirm.
Set ok is displayed.
3. Press the key to return to standby mode.
49
BD1217 ME4251 user guide [5] 18/7/05
Page 50
Resetting your Base to the Default (Pre-Set) Settings
In the base settings menu:
1. Press the
or
key to display Default and press the SKL key to select.
2. Confirm? is displayed, press the SKL key to confirm. Set ok is displayed.
Note: Press the SKR key to cancel.
3. Press the
key to return to standby mode.
Base Default Settings:
Base Ringer Melody
Base Ring On/Off
RingTone 1 Dial Mode
DTMF
100ms
ON
FlashTime
Priority Call Alert
All
Clock Date/Clock time
01/01/2005
00:00
Function Menu
The function menu allows you to use your handset as to play games on, or as
walkie talkies (if you have 2 or more handsets).
When using the function menu the
icon will be displayed.
Games
There are 2 games you can choose from: Snake and Guess Number.
In the function menu:
1. Press the
or
key to display Games and press the SKL key to select.
2. Press the
or
key to display either Snake or Guess number and press the
SKL key to select.
50
BD1217 ME4251 user guide [5] 18/7/05
Page 51
If you select Snake:
Four options will be displayed, use the
want and press the SKL key to confirm.
or
keys to highlight the option you
Play - select to play the game.
Key controls:
2 - to move UP
Press 6 - to move RIGHT
Press
Press 8 - to move DOWN
Press SKL - to PAUSE
Press 4 - to move LEFT
Press SKR - to EXIT
Set speed - select to choose from 5 speeds at which to play the game. Press the
key to go faster or the key to go slower.
Highest score - select to view the highest score.
Help - select to display the rules of the game and the control keys.
If you select Guess Number:
Four options will be displayed, use the
want and press the SKL key to confirm.
or
keys to highlight the option you
Start Game - select to play the game.
Level - use to select the difficulty level - High, Medium or Low.
Highest score - select to view the highest score.
Help - select to display the rules of the game.
3. Press the SKR key to go back to the game menu options.
Or
Press the
key to return to stan.dby
51
BD1217 ME4251 user guide [5] 18/7/05
Page 52
WalkieTalkie mode
With 2 or more handsets, you can use them as walkie talkies even when they are
out-of-range from the base station.
In walkie talkie mode, you will not be able to use any other handset
functions or make or receive calls. Please ensure that you Disable the
walkie talkie mode to make or receive calls.
To use the handsets as walkie talkies
In the function menu:
1. Press the
or
key to display Walkie Talkie and press the SKL key to select.
2. Press the
or
key to highlight Enable and press the SKL key to select.
3. Enter the Group ID code (e.g. 1234, any number with four digits) and press the
SKL key to confirm.
Note:The Group ID of different handsets must be the same in order
to communicate.
4. Enter the WT ID code (from 1 to 9) and press the SKL key to confirm.
Note:The WT ID code of handsets in the same group must be different, i.e. 9
handsets in the same group can communicate as walkie talkies provided that each
handset has a different WT ID code, ranging from 1 through to 9.
You are now in WalkieTalkie mode.
5. To call another walkie talkie - press the
then enter the other WT ID. Or
,
,
keys
To call all other walkie talkies in the group - press the * key.
The called walkie talkie(s) will ring (internal ring) and the calling WT ID will be
displayed to tell them who's calling.
52
BD1217 ME4251 user guide [5] 18/7/05
Page 53
6. To accept a call - press the
or
key.
You can now communicate using the handsets as walkie talkies.
Or
To reject a call - press the SKR key.
7. To exit walkie talkie mode, select Disable from the Walkie talkie menu.
To exit walkie talkie mode and return the handset to normal mode
In the function m enu:
1. Press the
to select.
or
key to display Walkie Talkie and press the SKL key
2. Press the
or
key to highlight Disable and press the SKL key to select.
Exited will be displayed.
3. Press the
key to return to standby.
53
BD1217 ME4251 user guide [5] 18/7/05
Page 54
Quick Reference
Handset power on/off
Makingexternalcalls
Handsfree calls
Press and hold
or , enter number/enter number
or
,
(Makecall) enter number
/ (during call)
Receiving calls
or / (auto answeron) Lifthandset from base/charger
/ Place handset in base/charger
Endingcalls
Dial Phone book entry
SKL,
/
to Phone Book, SKL,
/
to Search, SKL,
/
to entry,
Hold/forwardcalls
Making internal calls
Transfer call
During call,
, enter ext. number,
to transfer
or
,
/
display handset number,
, enter handset number,
to transfer
Teleconference
Page handsets
Mute on/off
, enter handset number, when answers, 3
Page,handsets ring. Stop ring - Page or any key on handset
During call, SKL to switch on/off
Key lock on/off
Press and hold #
Shortcut to Missed Calls log From standby,
Shortcut to Received Calls log From standby,
54
BD1217 ME4251 user guide [5] 18/7/05
Page 55
PHONEBOOK
Store entries
In Phonebook menu:
/
to Add , SKL, enter name, SKL, enter number,
to select group, SKL, to exit
SKL, SKL to Set Group,
/
OR
Fromstandby:enter number SKL,
SKL, enter name, SKL, to select group, SKL,
In Phonebook menu: Search displayed, SKL, enter 1st letter ,
/
to select location,
/
to exit
Search for entry
SKL,
/
to entry, SKL, to view details,
to exit
View Group Contacts
In Phonebook menu:
display Group,SKL,
In Phonebook menu:
display Group,SKL,
/
to Groups, SKL,
to View ,
to Groups, SKL,
to Edit name, SKR toDelete, enter
to exit
to Speed Dial, SKL,
to Speed Dial Key,SKL, SKL to access Phone Book,
display Entry, SKL to confirm, to exit
In Phonebook menu: to Speed Dial, SKL,
to Speed Dial Key, SKL,
/
to
to Entry, SKL,
to
to exit
/
/
Edit Group Contacts
Store Speed Dial
Delete Speed Dial
/
/
/
characters/digits, SKL to confirm,
In Phonebook menu:
/
/
/
to
/
/
to Delete, SKL, SKL to confirm,
to exit
55
BD1217 ME4251 user guide [5] 18/7/05
Page 56
CALLS LOG
View log
In Calls log menu:
/
to scroll calls, SKL to view details
of a call, SKR back to log,
to exit
View Dialed Calls log
View Received Calls log
View Missed Calls log
Save to Phone book
Using shortcut key from standby:
SKL to viewdetails of a call, SKR back to log,
Using shortcut key from standby:
to viewdetailsof a call, SKR backto log,
Using shortcut key from standby:
,
/
to scroll calls,
to exit
,
/
to scroll calls, SKL
to exit
,
/
to scroll calls,
SKL to viewdetails of a call, SKR back to log,
to exit
to
Withcall displayed: SKL, Save, SKL to confirm,
/
select location, SKL, enter name, SKL,
to exit
to exit
to
Delete Calls log entry
Delete entire Calls log
With call displayed: SKL, to Delete,
/
In Callslog menu:
to Delete, SKL,
/
highlight call log or Delete All, SKL to confirm,
to exit
TIMER MENU
Set Date and Time
In Timer menu:
/
to Clock , SKL, enter date, SKL,
enter time, SKL,
to exit
56
BD1217 ME4251 user guide [5] 18/7/05 1:20 pm Page 57
Set Alarm
In Timer menu:
/
to Alarm, SKL,On/Off displayed, SKL,
/
to select frequency, SKL,enter time, SKL,SKR, to
Ring Type, SKL,
Volume, SKL,
Press any key
/
to select melody, SKL,SKR, to Ring
/
to select volume,SKL, Off to exit
Silence Alarm
HANDSETT SETINGS
Changeringer melody
In Handset settings menu:
/
to Ring Type, SKL,
/
to
to exit
/
select ring type, SKL,
/
to select melody, SKL,
Change ring volume
In Handset settings menu:
/
to Ring Volume, SKL,
to required volume, SKL,
to Ring On/Off, SKL,
to select ring type, SKL,
/
to exit
Switch external ringer on/off In Handset settings menu:
/
/
to External On/Off, SKL,
/
to External On
or External Off, SKL,
In Handset settings menu:
to Internal on/off, SKL,
to exit
to Rin Ogn/off, SKL,
to Internal on or Internal off,
Switch internalringer on/off
Pre Fix on/off
/
/
/
SKL,
to exit
In Handset settings menu:
/
to Pre fix, SKL, SKL ,
/
to display Off or on, SKL,
to exit
57
BD1217 ME4251 user guide [5] 18/7/05
Page 58
Store Pre Fix
Call Barring
In Handset settings menu:
/
to Pre fix, SKL, to
to exit
Pre fix edit, SKL, enter prefix number, SKL,
In Handset settings menu:
/
to Outgoing call bar, SKL,
enter 4 digit PIN,SKL,
/
to required option, SKL,
(if PreCall selected, enter number, then SKL)
In Handset settings menu: to Message waiting, SKL,
to Service, enter service number, SKL,
number or to exit
In Handset settings menu:
to exit
Store Messaging
ServiceNumber
/
/
to dial
Clear Messages
/
to Message waiting, SKL,
/
to Clear message, SKL,
to exit
to Wallpaper, SKL,
to exit
Change display wallpaper
Change display language
Setdisplay contrast
Set Key tones on/off
In Handset settings menu:
to select wallpaper, SKL,
In Handset settings menu:
to select language, SKL,
In Handset settings menu:
/
/
/
to Language, SKL,
to exit
/
/
to Contrast, SKL,
/
to set level, SKL,
In Handset settings menu:
to Key tone on or Key tone off,
to exit
/
to Key tone,
/
SKL,
to exit
SKL,
58
BD1217 ME4251 user guide [5] 18/7/05
Page 59
Auto Answer on/off
Handset name
LCD Mode
In Handset settings menu:
/
to Auto answer, SKL ,
/
to Auto Answer On or Auto Answer Off SKL,
to exit
In Handset settings menu:
name SKL, to exit
In Handset settings menu:
/
to Handset Name, enter a
/
to LCD Mode, SKL,
/
to Extended Mode or Power Save Mode,
SKL,
to exit
Reset handset
In Handset settings menu:
/
to Default, Confirm?
displayed, SKL to confirm,
to exit
BASE SETTINGS
Change ringer melody
In Base settings menu:
to select melody, SKL,
In Base settings menu:
/
to Base Ring Tone,SKL,
to exit
/
Baseringer On/Off
Priority call alert
/
to Base Ring On/Off, SKL,
/
to display On or Off, SKL,
to exit
In Base settings menu:
/
to Priority Call Alert,SKL,
/
to select Priorit Handset, SKL,
/
to select
no. of rings, SKL,
to exit
to Dial Mode, SKL, set required mode,
Change dial mode
In Base settings menu:
/
59
SKL,
to exit
BD1217 ME4251 user guide [5] 18/7/05 1:20 pm Page 60
Register a handset
At base: Press and hold Page until 2 beeps sound.
At handset, in base settings menu: to Register
Handset, SKL, to select base number, SKL,
enter PIN, SKL, when Register OK displayed
In Base settings menu: to De-register, SKL, enter
PIN, SKL, to display handset number, SKL,
Confirm? displayed, SKL to confirm to exit
In Base settings menu: to Select base, SKL,
to base number or Auto base, SKL, to exit
In Base settings menu: to System PIN, SKL,
enter current PIN, SKL, enter new 4-digit PIN, SKL, re-enter
/
/
to exit
De-register a handset
/
/
Select base to use
Change PIN code
/
/
new PIN, SKL,
to exit
Change Flash (Recall)Time
Reset Base
In Base settings menu:
select time, SKL ,
In Base settings menu:
/
to Flash time,
/
to
to exit
/
to Default, SKL,
Confirm? displayed, SKL to confirm,
to exit
60
BD1217 ME4251 user guide [5] 18/7/05
Page 61
FUNCTION
Set WalkieTalkie mode
In Function menu:
/
to WalkieTalkie, SKL,
/
to Enable,SKL, enter Group ID, SKL, enter WT ID, SKL -
In walkie talkie mode: Press
to call
then WTID code or
, *
Return to normal mode
In Function menu:
/
to Walkie Talkie, SKL,
to exit
/
to
Disable, SKL,
61
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 62
WARRANTY INFORMATION
MOTOROLA DOES NOT WARRANT ITS CORDLESSTELEPHONE PRODUCTS
(“PRODUCT(S)”)TOYOU,THE END-USER. A LIMITED WARRANTY FORTHIS PRODUCT
IS PROVIDEDTOYOU BY MOTOROLA’S DISTRIBUTOR (“DISTRIBUTOR”) PURSUANT
TO DOCUMENTATION INCLUDED WITHTHIS PRODUCT. PLEASE CONTACTTHE
DISTRIBUTOR IFYOU EXPERIENCE PROBLEMS WITHTHIS PRODUCT.
t
t
TOTHE FULLEST EXTENT PERMITTED UNDER APPLICABLE LAW (A) MOTOROLA
HEREBY DISCLAIMS ALL WARRANTIES OF ANY KIND RELATINGTOTHE PRODUCT
THAT BINDTHE MANUFACTURER, WHETHER EXPRESS, IMPLIED OR STATUTORY,
INCLUDING BUT NOT LIMITEDTO IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTY AGAINST
INFRINGEMENT PROVIDED UNDER ANY LAW, AND (B) IN NO EVENT SHALL
MOTOROLA BE LIABLETOYOU OR ANY OTHER PARTY FOR ANY DIRECT, INDIRECT,
GENERAL, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR OTHER
DAMAGES ARISING OUT OFTHE USE OR INABILITYTO USETHE PRODUCT
(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, LOSS OF INFORMATION OR ANY OTHER PECUNIARY
LOSS), OR FROM ANY BREACH OF WARRANTY, EVEN IF MOTOROLA HAS BEEN
ADVISED OFTHE POSSIBILITY OF SUCH DAMAGES. MOTOROLA SHALL NOT BE
BOUND BY PRODUCT RELATED STATEMENTS NOT DIRECTLY MADE BY MOTOROLA
NOR ANY WARRANTY OBLIBATIONS APPLICABLETOTHE DISTRIBUTOR.
62
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 63
WARRANTY INFORMATION
GiantTelecom, BVI (Distributor) guarantees to you, the original purchaser, the digital
cordless telephone and accessories which you have purchased from an authorised
reseller (the "Products"), to be in conformance with the applicable specifications
current at the time of manufacture for a term of 24 months from date of purchase of
the Product(s) (WarrantyTerm).You must inform Distributor of the lack of conformity to
the applicable specifications of any of the Products within a period of two (2) months
from the date on which you detect a defect in material, workmanship or lack of
conformity and in any event within a term not to exceed the WarrantyTerm, and must
immediately submit the Product for service to Distributor's Repair or Service Centre.
During the Warranty term, Distributor will, at its discretion and without extra charge, as
your exclusive remedy, repair or replace your Product which does not comply with this
warranty; or failing this, to reimburse the price of the Product but reduced to take into
account the use you have had of the Product since it was delivered.This warranty will
expire at the end of the WarrantyTerm.
HOWTO GET WARRANTY SERVICE?
In order to be eligible to receive warranty service, you must present your receipt of
purchase or a comparable substitute proof of purchase bearing the date of purchase.
The digital cordless telephone should also clearly display the original compatible
electronic serial number. Such information is contained with the Product.
For details, please contact:
0870 197 4131 UK
63
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 64
You must ensure that all and any repairs or servicing is handled at all times by a
Distributor's Service Centre in accordance with the Distributor's Service requirements.
In some cases, you may be requested to provide additional information concerning the
maintenance of the Products by Distributor's Service Centres only, therefore it is
important to keep a record of any previous repairs, and make them available if
questions arise concerning maintenance.
W
t
CONDITIONS
This warranty will not apply if the type or serial numbers on the Product has been
altered, deleted, duplicated, removed, or made illegible. Distributor reserves the right
to refuse free-of-charge warranty service if the requested documentation can not be
presented or if the information is incomplete, illegible or incompatible with the factory
records. Repair, at Distributor's option, may include reflashing of software, the
replacement of parts or boards with functionally equivalent, reconditioned or new
parts or boards. Replaced parts, accessories, batteries, or boards are warranted for the
balance of the original warranty time period.The WarrantyTerm will not be extended.
All original accessories, batteries, parts, and digital cordless telephone that have been
replaced shall become the property of Distributor.
•
•
•
•
•
Distributor does not warrant the installation, maintenance or service of the products,
accessories, batteries or parts.
Distributor will not be responsible in any way for problems or damage caused by any
ancillary equipment not furnished by Distributor which is attached to or used in
connection with the Products.
•
•
64
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 65
When the Product is used in conjunction with ancillary or peripheral equipment not
supplied for this digital cordless telephone by Distributor, Distributor does not warrant
the operation of the Product/peripheral combination and Distributor will not honour
any warranty claim where the Product is used in such a combination and it is
determined by Distributor that there is no fault with the Product.
WHAT IS NOT COVERED BYTHE WARRANTY
This warranty is not valid if the defects are due to damage, misuse, tampering, neglect
or lack of care and in case of alterations or repair carried out by unauthorised persons.
The following are examples of defects or damage not covered by this product warranty
• Defects or damage resulting from use of the Product in other than its normal and
customary manner.
• Defects or damage from misuse, access to incompatible sources, accident or neglect.
• Defects or damage from improper testing, operation, maintenance, installation,
adjustment, unauthorised software applications or any alteration or modification of
any kind.
• Breakage or damage to antennas unless caused directly by defects in material or
workmanship.
• Products disassembled or repaired other than by Distributor in such a manner as to
adversely affect performance or prevent adequate inspection and testing to verify
any warranty claim.
• Defects or damage due to range, coverage, availability, grade of service, or operation
of the cellular system by the cellular operator.
• Defects or damage due to moist, liquid or spills of food.
65
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 66
• All plastic surfaces and all other externally exposed parts that are scratched or
• damaged due to customer normal use.
• Products rented on a temporary basis.
• Periodic maintenance and repair or replacement of parts due to normal wear and tear.
Note:The talk-time, stand-by time and total life cycle of the rechargeable batteries for
your digital cordless telephone will depend on usage conditions and network
configurations. As a consumable product, the specifications indicate that you should
be able to obtain optimum performance for your digital cordless telephone within the
first two months from date of purchase.
The warranty for the rechargeable batteries becomes void if (i) the batteries are
charged other than by original battery chargers specified for the charging of the
battery, (ii) any of the seals on the battery are broken or show evidence of tampering,
(iii) the battery is used in equipment or service other than the digital cordless
telephone for which it is specified.
Depending on operating conditions and your usage habits, wear and tear might take
place of components including mechanical problems related to Product housing, paint,
assembly, sub-assemblies, displays and keyboards and any accessories which are not
part of the Product's in-box configuration.The rectification of faults generated through
wear and tear and the use of consumable items like batteries is considered to be your
responsibility and therefore Distributor will not provide the free Warranty repair service
for these items.
66
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 67
Please make and retain a note of all data you have inserted into your Product for
example names and phone numbers, before submitting your Product for a Warranty
service as such data may be deleted or erased as part of the repair or service process.
OUT OF WARRANTY REPAIRS
If you request Distributor to repair your Product any time after the Warranty term or
where this warranty does not apply due to the nature of the defect or fault, then
Distributor may in its discretion carry out such repairs subject to you paying Distributor
its fees for such a repair or it may refer you to an authorised third party to carry out
such repairs.
67
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 68
MOTOROLA and the Stylized M Logo are registered in the US Patent &Trademark Office.
All other product or service names are the property of their respective owners. © Motorola, Inc. 2004.
|