Enabling the MU350 Series Radio’s BLUETOOTH® Functionality
2. Press the PTT Pod button and speak into the headset’s microphone to
transmit. Release the PTT Pod to receive transmission via the headset.
—
1. With the radio on, briefly press
current setting On/Off will flash.
until
appears on the LCD.The
Talkabout® Wireless BLUETOOTH® PTT Pod - 1693
(D) Using Motorola Earpiece - 53728 (no Microphone) connected to
the 1693 POD. The connected 1693 POD is paired to the MU350
Series Radio
1. Once you have completed pairing the MU350 Series Radio with the
PTT Pod, plug your earpiece connector into the headset connector port
located on the PTT Pod.
2. Press the PTT Pod button and speak into the MU350 Series radio’s
microphone to transmit. Release the PTT Pod to receive transmission via
the earpiece.
2. Press either the
3. Press PTT to save settings.
4. With the MU350 Series Radio BLUETOOTH® enabled, press and hold
or the
button to select On.
User’s Guide
Compatible with MU350R Series FRS/GMRS
BLUETOOTH® 2-way Radio.
the
button for about three seconds to enter pairing mode. A tone will
sound and the BLUETOOTH® LED indicator on the radio will flash blue.
5. Successful pairing will be indicated by a tone and brief flashing of the
BLUETOOTH® LED indicator to confirm entry to connected mode.
For further information
Note:The PTT Pod can be used in various use case scenarios with
various compatible products. See reference table on back page and
below description of the various use cases.The MU350 Series radio
can be paired with 2 BLUETOOTH® devices.
You may call Motorola Solutions, Inc. as follows:
visit us on the Internet at motorolasolutions.com/talkabout.
(E) Using Motorola Headsets with Microphone - 53725 or 56320
connected to the MU350 Series Radio’s accessory jack.The PTT POD is
paired with the MU350 Series Radio
1. Once you have completed pairing the MU350 Series Radio with the
PTT Pod, plug your headset connector into the headset connector port
located on the MU350 Series Radio.
2. Press the PTT Pod button and speak into the headset’s microphone to
transmit. Release the PTT Pod to receive transmission via the headset.
(A) Pairing the PTT Pod - 1693 with the MU350 Series Radio
1. Enable the MU350 Series Radio’s Bluetooth functionality (see above)
2. Ensure the PTT Pod is off.
Important Safety Information
Please observe the following to ensure reliable operation of the PTT Pod:
1. Read this manual thoroughly and observe the operating instructions and
information provided.
2. Do not expose the equipment to extreme temperatures or high relative
humidity and protect it from direct sunlight and dusty conditions.
3. Clean the equipment with a soft, damp cloth. Do not use any solvents or
aggressive cleaning agents.
3. Press and hold the power on/off
button until the PTT Pod LED
indicator light flashes blue and red alternatively.
4. With the MU350 Series Radio BLUETOOTH® enabled, press and hold
(F) Using the Motorola Earpiece - 53728 (no Microphone) connected to
the MU350 Series Radio’s accessory jack.The connected PTT POD is
paired with the MU350 Series Radio
1. Once you have completed pairing the MU350 Series Radio with the
PTT Pod, plug your earpiece connector into the headset connector port
located on the MU350 Series Radio.
the
button for about three seconds to enter pairing mode. A tone will
sound and the BLUETOOTH® LED indicator on the radio will flash blue.
5. Successful pairing will be indicated by a tone and brief flashing of the
BLUETOOTH® LED indicator to confirm entry to connected mode.
6. If pairing was successful, the PTT Pod LED indicator will flash blue at 5
second intervals.
4. Only connect approved accessories.
5. Only use the power plug supplied.
2. Press the PTT Pod button and speak into the radio’s microphone to
transmit. Release the PTT Pod to receive transmission via the earpiece.
6. Never open the unit. Opening the unit voids any claims under the terms
of the warranty and exposes the person to the risk of an electric shock.
7. Repairs to defective units should only be carried out by
Giant International Ltd.
8. Batteries built into device are NOT user replaceable. Discard entire device
according to local regulations.
7. If pairing fails, turn the PTT Pod and the MU350 Series Radio off and
repeat the above process.
(G) Using a generic BT Headset with the MU350 Series Radio
1. Connect headset as described under “B” without following step 2.
Reconnecting the PTT Pod - 1693 to the FRS/GMRS radio
After initially pairing and connecting your FRS/GMRS radio and PTT Pod,
when you turn on the PTT Pod, it will automatically reconnect with the
paired FRS/GMRS radio; however, you can press the power on/off button
once to connect rapidly.
PTT Pod LED Status under different operations mode
WARNING:TO REDUCETHE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSETHIS APPARATUSTO RAIN OR MOISTURE.
Status
Instructions
LED
Press and hold power on/off
(B) Pairing your Bluetooth Headset to the MU350 Series Radio and
the PTT Pod - 1693
Power on
Blue flashes 4 times
PTT Pod - 1693 Product At-A-Glance
button
button for 2 seconds
The MU350 Series Radio BLUETOOTH®
works with any qualified BLUETOOTH®
headsets from BLUETOOTH® SIG, Inc.
1. Enable the MU350 Series Radio’s
BLUETOOTH® Functionality (see above)
2. Pair with the PTT Pod (see “A” above)
3. Follow the BLUETOOTH® headset
manufacturer’s instruction to enable its
BLUETOOTH® function.
Press and hold the power on/off
button button 4 seconds
Red LED flashes for
1 second and then turns off
Power off
1. Power on/off button
1st time pairing: Press and
hold power on/off button
for 2 seconds when powering
on. After 1st pairing: Press and
2. Push-to-Talk (PTT) button
3. BLUETOOTH® LED
1
Red and blue LED flashes
alternately
2
Pairing mode
3
indicator
hold
for 6 seconds when
powering on.
4. Headset Jack
5. Charging Port
Blue LED flashes at a
2 second interval
Stand by
Paired
Ready for pairing
5
4
4. With the MU350 Series Radio
Blue LED flashes at a
5 second interval
BLUETOOTH® enabled, press and hold
Turning on/off the PTT Pod - 1693
Paired
To turn on/off your PTT Pod, press and hold the power on/off button
about 2 seconds.
for
the
button for about three seconds to enter pairing mode. A tone will
sound and the BLUETOOTH® LED indicator on the radio will flash blue.
5. Successful pairing will be indicated by a tone and brief flashing of the
BLUETOOTH® LED indicator to confirm entry to connected mode.
6. After successful pairing, you can talk and listen via the paired
BLUETOOTH® headset.
Steady Red LED (without
headset)
PTT
Press and hold PTT button
Charging the PTT Pod - 1693
The PTT Pod is equipped with a rechargeable battery that must be fully
charged before you use it for the first time.
1. Connect the power adapter to the unit. Plug the AC adapter into the
electrical outlet.
2. The LED indicator will be red while charging. If the LED indicator is not
red, check the connection.
Red and blue LED remains
on (with headset)
Blue LED flashes at a
5 second interval
Release PTT
Charging
Release PTT button
Connect charger
(C) Using the MotorolaVOX Headsets
(with Microphone) - 56320/53725
connected to PTT POD.The connected
1693 is paired with the MU350 Series
Radio
Steady red LED
Steady blue LED. Red may
flash periodically while
maintaining full charge
3. When the PTT Pod is fully charged, the red LED indicator will turn blue.
4. Remove the AC adapter from the PTT Pod.
After Pod is connected to
charger up to 3 hours
Charged
1. Once you have completed pairing the
MU350 Series Radio with the PTT Pod,
plug your headset connector into the
headset connector port located on the
PTT Pod.
Red LED flashes for
1 second and then turns off
Note: If charging while the PTT Pod is on, the PTT Pod will turn off
automatically.
Low Battery
5 mins after connectable mode
(no pairing)
Auto Power off
LED is off
KEM-ML36802
|