BluRay Series
MICROBOARDS TECHNOLOGY, LLC
TABLE OF CONTENTS
System Overview..................................................................................................5
Unpacking your system.........................................................................................5
Microboards Statement Regarding Improper Duplication .....................................5
Installation Requirements .....................................................................................6
Main Menu............................................................................................................7
Copy Disc to Disc..................................................................................................8
Simulation Disc to Disc .........................................................................................8
Registering Data to the Hard Drive (HDD)............................................................9
Erasing RW media..............................................................................................10
Copy Hard Drive (HDD) to Disc ..........................................................................10
Clearing the Hard Drive (HDD) ...........................................................................11
Setup Menu ........................................................................................................12
Mode Select................................................................................................13
BD-RE.........................................................................................................13
Copy HD/DISC............................................................................................13
BD WR Speed ............................................................................................13
DVD WR Speed..........................................................................................13
CD WR Speed ............................................................................................13
Auto Run.....................................................................................................13
Copy Quantity.............................................................................................13
Reader Select.............................................................................................13
Drive Inquiry................................................................................................14
F/W Version................................................................................................14
F/W Update.................................................................................................14
Log..............................................................................................................14
PC Connect (OPTIONAL)...................................................................................14
Connecting to a PC.....................................................................................14
Returning to Stand-Alone Mode..................................................................14
Error Codes ........................................................................................................15
Specifications......................................................................................................22
Supported Formats .............................................................................................22
Firmware Updates...............................................................................................22
Technical Support...............................................................................................22
3
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
4
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
System Overview
The BluRay Series employs either 4 or 10 BluRay recorders, depending on the model. The hard
drive comes standard with the Pro system and allows for image archiving of up to 25GB in size.
An intuitive, menu driven
display and 5-button control
interface provide one-touch
operation for the novice user
COPY START
(DISC to DISC)
while providing advanced
features for the professional.
Advanced Features:
•
•
•
•
•
•
•
•
•
Stand-Alone BD-R/BD-RE, DVD-+R/RW/DL, and CD-R/RW duplicator
One Touch duplication
Auto Run option
Speed selectable for DVD-+R and CD
Supports writing to BD-R/BD-RE, DVD-+R/RW/DL, and CD-R/RW
Copy and Verify
Hard drive comes standard for standalone BD/DVD image archival
Store multiple hard drive images
Counter feature allows the user to input how many discs need to be copied and
the keeps track of the total discs completed.
Automatically detects master type (BD, DVD, or CD)
Simulation mode to ensure recording stability
Easy-to-read, two-line display for status and error reporting
Updates easily installed through BluRay drive
•
•
•
•
Unpacking your system
When unpacking your duplicator, confirm the following items are included:
•
•
•
BluRay Series duplicator
Power cable
User’s Manual
If any of these items are missing, please contact or Microboards Technology Technical Support at
952-556-1639.
IMPORTANT: Please keep all the packing for your BluRay Series duplicator. If your unit ever
needs to be sent in for service, it must be returned in the original packing or the warranty will be
voided.
Microboards Statement Regarding Improper Duplication
Microboards Technology fully supports the right of any business, organization, group, or
individual to protect their property from unlicensed, unauthorized, or illegal duplication.
As a user of our equipment, we expect you to support that right as well.
Microboards Technology is neither responsible nor liable for the infringement of any laws
regarding the illegal duplication of property. Microboards Technology products are in no way
intended to encourage or condone such duplication.
5
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
Installation Requirements
System Setup
•
•
Connect the power cable to the BluRay Series tower and plug in to a protected power
outlet strip or UPS power supply.
Turn on power to the tower. The system is now ready to use.
Install your BluRay Series duplicator in the following environment:
•
•
•
•
•
On a level and stable surface
In a well ventilated location
Temperature and humidity
Temperature: 5-40°
Humidity: 20-80%RH (no dew formation)
Do not install it in the following places:
ƒ
Under direct sunlight (If the machine is exposed to sunlight, the light should be blocked
by a curtain or blind.)
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
A dusty location
A place where there is a lot of vibration
Near open flame
A place where the temperature and humidity change drastically
Near a heating device such as a heater or furnace
A location where air from an air conditioner blows directly onto the unit
Near a container filled with water
In winter during times of low humidity or in a location where static electricity is
generated, use an anti-static-electricity mat or humidifier to prevent static electricity.
Power supply
ƒ
ƒ
Use house current as the power source for the unit.
Do not use an outlet near a motor driven appliance (i.e. air conditioner, copying
machine).
ƒ
ƒ
Use an outlet with stable power supply voltages.
Do not overload an outlet. Do not use a service outlet from a PCs or other office
machine.
ƒ
ƒ
ƒ
Wire the power cord properly.
Do not touch the power cord with a wet hand.
Be careful not to damage the power cord.
Inspect the power cord periodically.
In the event that the power cord is damaged, replace the power cord.
Be sure to use a tool such as the screwdriver to change the 115/230V Switch.
Do not use your finger.
6
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
Main Menu
The Arrow buttons (▼▲)allow you to move forward or backward in the menu without selecting
the current menu item. The NO and ESC buttons will move you to the next menu item. YES will
select the current menu item.
YES
INSERT
INSERT
ANALYZING MASTER
COPY
22GB
20%
COPY START?
(DISCtoDISC)
MASTER DISC
TARGET DISC
BDROM
NO,▼
YES
MASTER SELECT?
(DISCtoDISC)
>READER?
(DISCtoDISC)
NO,▼
>HDD1?
>HDD1? 15:26
INSERT
COPY START?
(HDD1toDISC)
COPY
22GB
20%
(HDDtoDISC)
TARGET DISC
(BDROM 22GB)
BDROM
NO,▼
YES
>HDD2?
NO,▼
REGIST 15:26
CD-DA
INSERT
COPY START?
(HDD2toDISC)
COPY
22GB
20%
(DISCtoHDD/DISC)
20%
TARGET DISC
BDROM
NO,▼
>HDDX?
>HHDX? 15:26
INSERT
COPY START?
(HDDXtoDISC)
COPY
22GB
20%
(HDDtoDISC)
(HDDtoDISC)
TARGET DISC
BDROM
NO,▼
YES
YES
YES
>>HDD1 CLEAR?
>HDD1?
>MASTER CLEAR?
(HDDtoDISC)
NO,▼
>HDDX?
>>HDDX CLEAR?
NO,▼
(HDDtoDISC)
NO,▼
>>EXIT?
>EXIT?
NO,▼
YES
YES
SIMULATION?
(DISCtoDISC)
INSERT
INSERT
ANALYZING MASTER
SIMULATION 22GB
BDROM 20%
MASTER DISC
TARGET DISC
ESC
ESC
NO,▼
YES
YES
DISC ERASE?
(REWRITABLE)
SURE ?
SURE ?
DISC ERASE
Please wait...
>FULL ERASE?
YES
YES
NO,▼
NO,▼
>QUICK ERASE?
DISC ERASE
Please wait...
NO,▼
>EXIT?
NO,▼
YES
SETUP?
SETUP MENU
(see pg 12)
(MODE CHANGE)
ESC
7
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
Copy Disc to Disc
Please see page 13 regarding the use of BD-RE media.
1. Place the Master Disc into the drive designated as the Reader in the Setup menu (see
page 13).
Place the blank disc(s) into the Recorder drive(s) and wait for the LED(s) on the front of
the Recorder(s) to go out. Note that the blanks must be of the same media type as the
master; you cannot copy a DVD master to BD’s, for instance.
2. The display reads COPY START? (DISC to DISC).
Copy Start?
(DISC to DISC)
3. Press YES. If you have the Auto Run feature set to ON, the duplication will begin when
the master is loaded and all drives are loaded with blank media.
4. The drive trays will open on any recorder without blank discs installed. If you do not want
to make a copy in those drives, close the tray(s), wait for the drive light to go out, and
then press the YES button to start the copy job.
5. The display will now show the progress of the Copy Job.
COPY
BDROM
22.4GB
25%
6. The Recorder(s) will eject the recordable discs when the job is complete.
Simulation Disc to Disc
Important: Simulation is not allowed when using BD-R, BD-RE, or DVD+R/RW media.
1. At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display
shows SIMULATION? (DISC to DISC).
SIMULATION??
(DISC to DISC)
2. Place the Master Disc into the Reader drive
3. Place the blank disc(s) into the Recorder drive(s) and wait for the LED(s) on the front of
the Recorder(s) to go out.
4. Press YES.
5. The drive trays will open on any recorder without blank discs installed. If you do not want
to make a copy in those drives, close the tray(s), wait for the drive light to go out, and
then press the YES button to start the copy job.
6. The display will now show the progress of the Simulation Copy Job
SIMULATION
BDROM
22.4GB
25%
7. The Recorder(s) will eject the blank discs when the job is complete.
Note: DVD-R media will NOT be recorded to in Simulation Mode.
8
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
Registering Data to the Hard Drive (HDD)
When registering data to a partition on the internal hard drive, you do have the option of
recording to the blank media as well. In the SETUP menu, go to “Copy DISC to HD/DISC”
and change the setting from OFF to ON. This will allow the data from the master disc to be
copied to the internal hard drive, as well as any blank discs you have in the recorders. See
page 12 for a description of the SETUP menu.
1. At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display
shows MASTER SELECT? (DISC TO DISC)
MASTER SELECT?
(DISC to DISC)
2. Place the Master disc into the Reader drive.
3. Press the YES button
4. The display will show:
READER?
(DISC to DISC)
5. Press the NO or ▼ button
6. The display will now show:
HDD1?
(DISC to HDD)
7. If you wish to copy the data to the 1st partition, press the YES button.
8. If you wish to select another partition, press the NO or ▼ button.
HDD1?
(DISC to HDD)
9. By continuing to press the NO or ▼ button, you will scroll through the different HDD
partitions. Once you are at the partition you wish to use, press the YES button.
10. The display will now show the progress of the data being transferred to the hard drive:
REGISTER
BDROM
22.4GB
25%
11. Once the Master disc has been copied to the HDD, the Reader drive will eject the disc.
When you go back into the MASTER SELECT? Menu, and select a partition with data
stored on it, the display will show the type of data (ROM or Video) and the capacity of
that data. Proceed to COPY HDD TO DISC section.
9
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
Erasing RW media
1. At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display
shows DISC ERASE? (REWRITABLE):
DISC ERASE?
(REWRITABLE)
2. Load the Recorder(s) with the BD-RE, DVD-+RW, or CD-RW media you wish to erase.
You can erase one disc at a time or fill all the Recorders to erase multiple discs at once.
All discs loaded must be of the same type.
3. Press the YES button
4. The next screen asks if you want to perform a Quick Erase.
QUICK ERASE?
If you wish to perform a Full Erase, press the NO button.
FULL ERASE?
Pressing the YES button at either of these selections will show the following screen:
SURE?
5. Press the YES button if you are sure you want to erase the disc. If you do not wish to
erase the disc, press the NO button and you will go back to the DISC ERASE screen
(step 1).
6. The screen will now show:
DISC ERASE
7. Once the erasing is complete, the Recorder(s) will eject the disc(s).
Copy Hard Drive (HDD) to Disc
When copying Hard Drive to Disc, all of the drives can be burned to, including the drive
designated as the Reader drive in the Setup menu
1. Follow the instructions on page 9 to register the Master to the HDD.
2. Press to NO or ▼ button until the screen displays
MASTER SELECT?
(DISC)
3. Press the YES button.
4. The display will show READER.
5. Press the NO or ▼ button and the display will show HDD1. If this is the hard drive
partition you wish to copy, press the YES button.
6. The screen will display COPY START? (HDD1 to DISC)
COPY START?
(HDD1 to DISC)
7. If you wish to select a different hard drive partition, press the NO or ▼ button in step 5,
unit the display shows the partition you wish to copy.
10
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
8. Place the blank disc(s) into all drive(s) and wait for the LED(s) on the front of the
Recorder(s) to go out. The drive designated in the Setup menu as the Reader is
available as a Recorder when burning HDD to Disc
9. Press the YES button. If you have the Auto Run feature set to ON, the duplication will
begin when all drives are loaded with blank media.
10. The drive trays will open on any recorder without blank discs installed. If you do not want
to make a copy in those drives, close the tray(s), wait for the drive light to go out, and
then press the YES button to start the copy job.
11. The display will now show the progress of the copy job from the HDD to the Recorder(s):
COPY
BDROM
22.4GB
25%
12. After the Copy job is complete, the disc(s) will be ejected from the Recorder(s).
Clearing the Hard Drive (HDD)
The Master Clear option will not appear if there is no information stored on any of the hard drive
partitions.
1. At the COPY START? (HDD1 to DISC) menu, press the NO or ▼ button until the display
shows MASTER SELECT? (HDD1 to DISC).
2. Press the YES button.
3. The display will show:
READER?
(DISC to DISC)
4. Press the NO or ▼ button until you the screen displays MASTER CLEAR? (HDD):
MASTER CLEAR?
(HDD)
5. Press the YES button
6. You can now select which hard drive partition to erase. Pressing the NO or ▼ button will
scroll you though the partition selections.
7. Press the YES button if you are sure you want to clear the HDD.
8. The hard drive will now be cleared and you will be asked if you want to register another
master to the HDD.
>HDD1?
(DISC to HDD)
9. Press YES and the Reader drive will eject and you can insert another master to register
to the HDD.
REGISTER
BDROM
22.4GB
25%
10. Press NO and to exit this menu without registering data to the hard drive partition.
11
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
Setup Menu
Yes
Yes
Yes
Yes
SETUP
MODE SELECT?
COPY?
(DISC to DISC)
VERIFY?
(DISC to DISC)
COPY + V?
(DISC to DISC)
EXIT?
COPY?
(COPY MODE)
BD-RE?
(Write+Verify))
Write+Verify?
HD/DISC ON?
WRITE?
EXIT?
Write+Verify?
HD/DISC ON?
COPY HD/DISC?
(OFF)
HD/DISC OFF?
Yes
Yes
Yes
Yes
BD WR Speed?
(MAX)
MAX?
MAX?
2X?
8X?
EXIT?
MAX?
DVD WR Speed?
(MAX)
2X?
EXIT?
MAX?
CD WR Speed?
(MAX)
MAX?
ON?
32X?
4X?
EXIT?
MAX?
Auto Run?
(OFF)
OFF?
Yes
Yes
Copy Quantity?
(xxxx/xxxx)
Copy Quantity?
0---
Reader Select?
(DRIVExx)
DRIVE01
DRIVE02
THE DISPLAY WILL CYCLE
THROUGH THE MAKE, MODEL,
AND FIRMWARE OF THE
SELECTED DRIVE UNTIL YOU
PRESS A BUTTON.
DRIVExx
EXIT?
DRIVE01
Yes
Drive Inquiry?
DRIVE01
THE DISPLAY WILL CYCLE
THROUGH THE MAKE, MODEL,
AND FIRMWARE OF THE
SELECTED DRIVE UNTIL YOU
PRESS A BUTTON.
DRIVE02
DRIVE (HDD)
EXIT?
DRIVE01
F/W VERSION
F/W UPDATE
OMNI
VER A.BC
H/W INFO
12ΦπρΨ
EXIT?
OMNI
VER A.BC
Yes
Yes
INSERT
Checking
UPDATE?
Updating
Complete
PROGRAM DISC
VER a.bc -> b.cd
LOG?
EXIT?
Yes
OK xxxxxxx
NG xxxxxxx
KEY
Yes
Caption indicates button to press
No caption indicates display sequence
▲(Back), NO, or ▼(Forward)
YES (Accept) or ESC (Return to Menu)
MODE SELECT?
(COPY MODE)
12
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
Setup Menu
1. At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display
shows SETUP? (MODE CHANGE)
SETUP?
(MODE CHANGE)
2. Press the YES button
3. The first setup option is Mode Select, followed by Copy DISC to HD/DISC, Write Speed,
ISRC Check, Copy Quantity, Session Mode, Drive Inquiry, Firmware Version and Exit.
4. Pressing the NO or ▼ button will allow you to move from menu to menu.
5. Pressing the YES button will allow you to view or change the configuration of the system.
6. Please follow the flow chart on page 12 to navigate through the Setup menu options.
Here is a description of each setup menu item:
Mode Select
COPY - Duplication from master disc to blank disc, or HDD to blank disc if master data is
registered.
VERIFY - It compares a copied disc with the master disc.
COPY+V - Copying in the COPY+VERIFY mode.
NOTE ON BD-RE: If you are using BD-RE media, you should specify WRITE+VERIFY in the
BD-RE setting (see below) rather than COPY+VERIFY. This will result in longer record
times, as the data is being checked while it is being written and re-written if there are
errors, but it makes using COPY+VERIFY unnecessary for BD-RE.
BD-RE
Default setting is WRITE+VERIFY, which should always be used for BD-RE media. This method
will write each block and then compare the written block to the master; if there are differences,
the block will be re-written. You will not need to run a Copy + Verify on BD-RE media duplicates
if you have this option set to WRITE+VERIFY. When set to WRITE, burn speed to BD-RE will be
faster, but verification cannot be guaranteed.
Copy HD/DISC
Default setting is OFF. When set to ON, this allows you to copy the master disc to Hard Drive
Partition 1 AND blank discs.
BD WR Speed
The burn can be set to 4X or 2X. 4X burn speed will only occur with 4X certified blank media. In
addition, the master must either be on the hard drive or on 4X media for 4X burning.
DVD WR Speed
Available speeds range from 16x down to 2x.
CD WR Speed
Available speeds range from 40x down to 4x.
Auto Run
Default setting is OFF. When set to ON, this allows the duplicator to start the duplication process
when all recorders are loaded with blank media. If you are copying Disc-to-Disc, the master must
be loaded before duplication will begin.
>>COPY QUANTITY
Copy Quantity
Set up the number of disc you want to copy.
0750
Use the ▼▲buttons to change the number in the current column up or down. YES will move you
one column to the right, NO will move you 1 column to the left. Press YES when in the right
column to save the number of copies entered. The example above shows that 750 copies have
been entered with the cursor currently in the right column (underlined).
Reader Select
Changes which drive is selected as the reader when burning Disc-to-Disc. Any of the drives can
be set as the reader.
13
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
Drive Inquiry
Displays an inquiry of each drive connected, showing drive model and firmware.
F/W Version
Shows BluRay Series firmware version and H/W information.
F/W Update
Used when updating the firmware of the BluRay Series duplicator.
Log
Displays the number of successful and unsuccessful discs over the entire life of the duplicator.
PC Connect (OPTIONAL)
The BluRay Series includes an optional PC Connect capability, allowing you to use one of the
recorder drives as an external recorder. This connection requires a USB 2.0 connection to your
PC.
If you did not purchase this option when the tower was purchased, you will not have this
capability.
Connecting to a PC
To use the PC Connect capability, the duplicator must be turned off if it is currently on.
1. Plug the USB 2.0 connection into the PC.
2. Plug the USB 2.0 connection into the port on the back of the duplicator.
3. Turn on the duplicator. The display should be left at:
COMPUTER MODE
YES: STANDALONE
4. If the operating system on your PC does not shortly recognize the drive and make it
available for use, you will need to reboot your PC.
5. You will now be able to access the bottom recorder drive in the duplicator as an external
DVD recorder.
DO NOT PRESS THE YES BUTTON ON THE DUPLICATOR WHILE YOU ARE BURNING TO
OR READING FROM THE RECORDER!
Returning to Stand-Alone Mode
To return the duplicator to Stand-Alone Mode, please follow these steps:
1. Press YES when the display reads:
COMPUTER MODE
YES: STANDALONE
2. The duplicator will then initialize the drives and be ready for duplication when the display
reads:
COPY START?
(DISC to DISC)
3. The recorder will not be available to the connected PC until the duplicator is power cycled
again.
14
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
Error Codes
Read Errors
ASC
00
00
00
00
00
00
00
00
01
02
04
04
04
04
04
05
06
08
08
08
08
09
09
09
09
0A
0B
0B
0B
10
11
11
11
11
11
11
12
13
14
14
14
15
15
15
17
17
17
ASCQ Description
NO ADDITIONAL SENSE INFORMATION
00
06
11
12
13
14
15
17
00
00
00
01
02
03
07
00
00
00
01
02
03
00
01
02
03
00
00
01
02
00
01
02
05
06
0F
10
00
00
01
05
06
00
01
02
00
01
02
I/O PROCESS TERMINATED, PLAY OPERATION ABORTED
AUDIO PLAY OPERATION IN PROGRESS
AUDIO PLAY OPERATION PAUSE
AUDIO PLAY OPERATION SUCCESSFULLY COMPLETED
AUDIO PLAY OPERATION STOPPED DUE TO ERROR
NO CURRENT AUDIO STATUS TO RETURN
CLEANINF REQUESTED
NO INDEX/SECTOR SIGNAL
NO SEEK COMPLETE
LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE
LOGICAL UNIT IS IN PROCESS OF BECOMING READY
LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUESTED
LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED
LOGICAL UNIT NOT READY, OPERATION IN PROGRESS
LOGICAL UNIT DOES NOT RESPOND TO SELECTION
NO REFERENCE POSITION FOUND (medium may be upside down)
LOGICAL UNIT COMMUNICATION FAILURE
LOGICAL UNIT COMUUNICATION TIME-OUT
LOGICAL UNIT COMMUNICATION PARITY ERROR
LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32)
TRACK FOLLOWING ERROR
TRACKING SERVO FAILURE
FOCUS SERVO FAILURE
SPINDLE SERVO FAILURE
ERROR LOG OVERFLOW
WARNING
WARNING-SPECIFIED TEMPERATURE EXCEEDED
WARNING-ENCLOSURE DEGRADED
ID CRC OR ECC ERROR
UNRECOVERED READ ERROR
ERROR TOO LONG TO CORRECT
L-EC UNCORRECTABLE ERROR
CIRC UNRECOVERED ERROR
ERROR READING UPC/EAN NUMBER
ERROR – LOSS PF STREAMING
ADDRESS MARK NOT FOUND FOR ID FIELD
ADDRESS MARK NOT FOUND FOR DATA FIELD
RECORD NOT FOUND
RECORD NOT FOUND – RECOMMEND REASSIGNMENT
RECORD NOT FOUND – DATA AUTO – REALLOCATED
RANDOM POSITIONING ERROR
MECHANICAL POSITIONING ERROR
POSITIONING ERROR DETECTED BY READ OF MEDIUM
RECOVERED DATA WITH NO EEOR CORRECTION APPLIED
RECOVERED DATA WITH RETRIES
RECOVERED DATA WITH POSITIVE HEAD OFFSET
15
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
17
17
17
18
18
18
18
1A
1B
1E
20
21
24
25
26
26
26
26
26
28
29
29
29
29
29
2A
2A
2A
2A
2B
2C
2C
2F
30
30
30
30
35
35
35
35
35
39
3A
3A
3A
3B
3B
3B
3B
3B
03
04
05
00
01
03
04
00
00
00
00
00
00
00
00
01
02
03
04
00
00
01
02
03
04
00
01
02
03
00
00
05
00
00
01
02
03
00
01
02
03
04
00
00
01
02
0F
11
12
13
14
RECOVERED DATA WITH NEGATIVE HEAD OFFSET
RECOVERED DATA WITH RETIES AND/OR CIRC APPLIED
RECOVERED DATA USING PREVIOUS SECTOR ID
RECOVERED DATA WITH ERROR CORRECTION APPLIED
RECOVERED DATA WITH ERROR CORP. & RETRIES APPLIED
RECOVERED DATA WITH CIRC
RECOVERED DATA WITH L-EC
PARAMETER LIST LENGTH ERROR
SYNCHRONOUS DATA TRANSFER ERROR
RECOVERED ID WITH ECC CORRECTION
INVALID COMMAND OPERATION CODE
LOGICAL BLOCK ADDRESS OUT OF RANGE
INVALID FIELD IN CDB
LOGICAL UNIT NOT SUPPORTED
INVALID FIELD IN PARAMETER LIST
PARAMETER NOT SUPPORTED
PARAMETER VALUE INVALID
THRESHOLD PARAMETERS NOT SUPPORTED
INVALID RELEASE OF ACTIVE PERSISTENT RESERVATION
NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
POWER ON OCCURRED
SCSI BUS RESET OCCURRED
BUS DEVICE RESET FUNCTION OCCURRED
DEVICE INTERNAL RESET
PARAMETERS CHANGED
MODE PARAMETERS CHANGED
LOG PARAMETERS CHANGED
RESERVATIONS PREEMPTED
COPY CANNOT EXECUSE SINCE HOST CANNOT DISCONNECT
COMMAND SEQUENCE ERROR
PERSISTENT PREVENT CONFLICT
COMMANDS CLEARED BY ANOTHER INITIATOR
INCOMPATIBLE MEDIUM INSTALLED
CANNOT READ MEDIUM - UNKNOWN FORMAT
CANNOT READ MEDIUM – INCOMPATIBLE FORMAT
CLEASNING CARTRIDGE INSTALLED
ENCLOSURE SERVICES FAILURE
UNSUPPORTED ENCLOSURE FUNCTION
ENCLOSURE SERVICES UNAVAILABLE
ENCLOSURE SERVICES TRANSFER FAILURE
ENCLOSURE SERVICES TRANSFER REFUSED
SAVING PARAMETERS NOT SUPPORTED
MEDIUM NOT PRESENT
MEDIUM NOT PRESENT-TRAY CLOSED
MEDIUM NOT PRESENT-TRAY OPEN
END OF MEDIUM REACHED
MEDIUM MAGAZINE NOT ACCESSIBLE
MEDIUM MAGAZINE REMOVED
MEDIUM MAGAZINE INSERTED
MEDIUM MAGAZINE LOCKED
16
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
MEDIUM MAGAZINE UNLOCKED
3B
3B
3D
3E
3E
3E
3F
3F
3F
3F
40
43
44
45
46
47
48
49
4A
4B
4C
4D
4E
53
53
55
57
5A
5A
5B
5B
5B
5B
5D
15
16
00
00
01
02
00
01
02
03
NN
00
00
00
00
00
00
00
00
00
00
NN
00
00
02
00
00
00
01
00
01
02
03
00
MECHANICAL POSITIONING OR CHANGER ERROR
INVALID BITS IN IDENTIFY MESSAGE
LOGICAL UNIT HAS NOT SELF-CONFIGURED YET
LOGICAL UNIT FAILURE
TIMEOUT ON LOGICAL UNIT
TARGET OPERATING CONDITIONS HAVE CHANGED
MICROCODE HAS BEEN CHANGED
CHANGED OPERATING DEFINITION
INQUIRY DATA HAS CHANGED
DIAGNOSTIC FAILURE ON COMPONENT NN (80H-FFH)
MESSAGE ERROR
INTERNAL TARGET FAILURE
SELECT OR RESELECT FAILURE
UNSUCCESSFUL SOFT RESET
SCSI PARITY ERROR
INITIATOR DETECTED ERROR MESSAGE RECEIVED
INVALID MESSAGE ERROR
COMMAND PHASE ERROR
DATA PHASE ERROR
LOGICAL UNIT FAILED SELF-CONFIGURATION
TAGGED OVERLAPPED COMMANDS (NN=QUEUE TAG)
OVAERLAPPED COMMANDS ATTEMPTED
MEDIA LOAD OR EJECTED FAILED
MEDIUM REMOVAL PREVENTED
SYSTEM RESOURCE FAILURE
UNABLE TO RECOVER TABLE-OF-CONTENTS
OPERATOR REQUEST OR STATE CHANGE INPUT
OPERATOR MEDIUM REMOVAL REQUEST
LOG EXCEPTION
THRESHOLD CONDITION MET
LOG COUNTER AT MAXIMUM
LOG LIST CODES EXHAUSTED
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Logical
Unit Failure
5D
01
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Media
Failure
5D
5E
5E
5E
5E
5E
63
63
64
65
73
80
FF
00
01
02
03
04
00
01
00
00
00
xx
FAILURE PREDICTION THRESHOLD EXCEEDED (FALSE)
LOW POWER CONDITION ON
IDLE CONDITION ACTIVATED BY TIMER
STANDBY CONDITION ACTIVATED BY COMMAND
IDLE CONDITION ACTIVATED BY COMMAND
STANDBY CONDITION ACTIVATED BY COMMAND
END OF USER AREA ENCOUNTERED ON THIS TRACK
PACKET DOES NOT FIT IN AVAILABLE SPACE
ILLEGAL MODE FOR THIS TRACK
VOLTAGE FAULT
CD CONTROL ERROR
VENDOR SPECIFIC
17
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
Write Errors
ASC
00
00
00
00
00
00
00
02
04
04
04
04
04
04
04
05
06
08
08
08
08
09
09
09
09
0A
0B
0B
0B
0C
0C
0C
0C
0C
0C
0C
11
11
15
15
15
16
16
16
16
16
17
17
17
ASCQ Description
NO ADDITIONAL SENSE INFORMATION
00
06
11
12
13
14
15
00
00
01
02
03
04
07
08
00
00
00
01
02
03
00
01
02
03
00
00
01
02
00
02
03
07
08
09
0A
00
06
00
01
02
00
01
02
03
04
00
01
02
I/O PROCESS TERMINATED, PLAY OPERATION ABORTED
AUDIO PLAY OPERATION IN PROGRESS
AUDIO PLAY OPERATION PAUSED
AUDIO PLAY OPERATION SUCCESSFULLY
AUDIO PLAY OPERATION STOPPED DUE TO ERROR
NO CURRENT AUDIO STATUS TO RETURN
NO SEEK COMPLETE
LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE
LOGICAL UNIT IS IN PROCESS OF BECOMING READY
LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUIRED
LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED
LOGICAL UNIT NOT READY, FORMAT IN PROGRESS
LOGICAL UNIT NOT READY, OPERATION IN PROGRESS
LOGICAL UNIT NOT READY, LONG WRITE IN PROGRESS
LOGICAL UNIT DOES NOT RESPOND TO SELECTION
NO REFERENCE POSITION FOUND
LOGICAL UNIT COMMUNICATION FAILURE
LOGICAL UNIT COMUUNICATION TIME-OUT
LOGICAL UNIT COMMUNICATION PARITY ERROR
LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32)
TRACK FOLLOWING ERROR
TRACKING SERVO FAILURE
FOCUS SERVO FAILURE
SPINDLE SERVO FAILURE
ERROR LOG OVERFLOW
WARNING
WARNING-SPECIFIED TEMPERATURE EXCEEDED
WARNING-ENCLOSURE DEGRADED
WRITE ERROR
WRITE ERROR-RECOVERED WITH AUTO REALLOCATION
WRITE ERROR-RECOMMEND REASSIGNMENT
WRITE ERROR-RECOVERY NEEDED
WRITE ERROR-RECOVERY FAILED
WRITE ERROR-LOSS OF STREAMING
WRITE ERROR-PADDING BLOCKS ADDED
UNRECOVERED READ ERROR
CIRC UNRECOVERED ERROR
RANDOM POSITIONING ERROR
MECHANICAL POSITIONING ERROR
POSITIONING ERROR DETECTED BY READ OF MEDIUM
DATA SYNCHRONIZATION MARK ERROR
DATA SYNC ERROR-DATA REWRITTEN
DATA SYNC ERROR-RECOMMEND REWRITE
DATA SYNC ERROR-DATA ATUO-REALLOCATED
DATA SYNC ERROR-RECOMMEND REASSIGNMENT
RECOVERED DATA WITH NO ERROR CORRECTION APPLIED
RECOVERED DATA WITH RETRIES
RECOVERED DATA WITH POSITIVE HEAD OFFSET
18
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
17
17
17
17
17
03
04
05
06
07
RECOVERED DATA WITH NEGATIVE HEAD OFFSET
RECOVERED DATA WITH RETRIES AND/OR CIRC APPLIED
RECOVERED DATA USING PREVIOUS SECTOR ID
RECOVERED DATA WITHOUT ECC - DATA AUTO-REALLOCATED
RECOVERED DATA WITHOUT ECC - RECOMMEND
REASSIGNMENT
17
17
18
18
18
18
18
18
18
18
19
19
19
19
1A
1B
1C
1C
1C
1D
20
21
21
24
25
26
26
26
26
26
27
27
27
27
27
27
27
28
29
29
29
29
29
2A
2A
08
09
00
01
02
03
04
05
06
07
00
01
02
03
00
00
00
01
02
00
00
00
02
00
00
00
01
02
03
04
00
01
02
03
04
05
06
00
00
01
02
03
04
00
01
RECOVERED DATA WITHOUT ECC - RECOMMEND REWRITE
RECOVERED DATA WITHOUT ECC - DATA REWRITTEN
RECOVERED DATA WITH ERROR CORRECTION APPLIED
RECOVERED DATA WITH ERROR CORR. & RETRIES APPLIED
RECOVERED DATA - DATA AUTO-REALLOCATED
RECOVERED DATA WITH CIRC
RECOVERED DATA WITH L-EC
RECOVERED DATA - RECOMMEND REASSIGNMENT
RECOVERED DATA - RECOMMEND REWRITE
RECOVERED DATA WITH ECC - DATA REWRITTEN
DEFECT LIST NOT ERROR
DEFECT LIST NOT AVAILABLE
DEFECT LIST ERROR IN PRIMARY LIST
DEFECT LIST ERROR IN GROWN LIST
PARAMETER LIST LENGTH ERROR
SYNCHRONOUS DATA TRANSFER ERROR
DEFECT LIST NOT FOUND
PRIMARY DEFECT LIST NOT FOUND
GROWN DEFECT LIST NOT FOUND
MISCOMPARE DURING VERIFY OPERATION
INVALID COMMAND OPERATION CODE
LOGICAL BLOCK ADDRESS OUT OF RANGE
INVALID ADDRESS FOR WRITE
INVALID FIELD IN CDB
LOGICAL UNIT NOT SUPPORTED
INVALID FIELD IN PARAMETER LIST
PARAMETER NOT SUPPORTED
PARAMETER VALUE INVALID
THRESHOLD PARAMETERS NOT SUPPORTED
INVALID RELEASE OF ACTIVE PERSISTENT RESERVATION
WRITE PROTECTED
HARDWARE WRITE PROTECTED
LOGICAL UNIT SOFTWARE WRITE PROTECTED
ASSOCIATED WRITE PROTECT
PERSISTENT WRITE PROTECT
PERSISTENT WRITE PROTECT
CONDITIONAL WRITE PROTECT
NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
POWER ON OCCURRED
SCSI BUS RESET OCCURRED
BUS DEVICE RESET FUNCTION OCCURRED
DEVICE INTERNAL RESET
PARAMETERS CHANGED
MODE PARAMETERS CHANGED
19
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
LOG PARAMETERS CHANGED
2A
2A
2B
2C
28
29
2A
2A
2C
2C
2C
2C
2E
2F
30
30
30
30
30
30
30
31
31
32
32
35
35
35
35
35
37
39
3A
3A
3A
3D
3E
3E
3E
3F
3F
3F
3F
40
43
44
45
46
47
48
49
02
03
00
00
00
00
00
01
00
03
04
05
00
00
00
01
02
05
06
08
09
00
01
00
01
00
01
02
03
04
00
00
00
01
02
00
00
01
02
00
01
02
03
NN
00
00
00
00
00
00
00
RESERVATIONS PREEMPTED
COPY CANNOT EXECUSE SINCE HOST CANNOT DISCONNECT
COMMAND SEQUENCE ERROR
NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
PARAMETERS CHANGED
MODE PARAMETERS CHANGED
COMMAND SEQUENCE ERROR
CURRENT PROGRAM AREA IS NOT EMPTY
CURRENT PROGRAM AREA IS EMPTY
PERSISTENT PREVENT CONFLICT
INSUFFICIENT TIME FOR OPERATION
COMMANDS CLEARED BY ANOTHER INITIATOR
INCOMPATIBLE MEDIUM INSTALLED
CANNOT READ MEDIUM - UNKNOWN FORMAT
CANNOT READ MEDIUM - INCOMPATIBLE FORMAT
CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT
CANNOT FORMAT MEDIUM - INCOMPATIBLE MEDIUM
CANNOT WRITE - APPLICATION CODE MISMATCH
CURRENT SESSION NOT FIXATED FOR APPEND
MEDIUM FORMAT CORRUPTED
FORMAT COMMAND FAILED
NO DEFECT SPARE LOCATION AVAILABLE
DEFECT LIST UPDATE FAILURE
ENCLOSURE SERVICES FAILURE
UNSUPPORTED ENCLOSURE FUNCTION
ENCLOSURE SERVICES UNAVAILABLE
ENCLOSURE SERVICES TRANSFER FAILURE
ENCLOSURE SERVICES TRANSFER REFUSED
ROUNDED PARAMETER
SAVING PARAMETERS NOT SUPPORTED
MEDIUM NOT PRESENT
MEDIUM NOT PRESENT - TRAY CLOSED
MEDIUM NOT PRESENT - TRAY OPEN
INVALID BITS IN IDENTIFY MESSAGE
LOGICAL UNIT HAS NOT SELF-CONFIGURED YET
LOGICAL UNIT FAILURE
TIMEOUT ON LOGICAL UNIT
TARGET OPERATING CONDITIONS HAVE CHANGED
MICROCODE HAS BEEN CHANGED
CHANGED OPERATING DEFINITION
INQUIRY DATA HAS CHANGED
DIAGNOSTIC FAILURE ON COMPONENT NN (80H-FFH)
MESSAGE ERROR
INTERNAL TARGET FAILURE
SELECT OR RESELECT FAILURE
UNSUCCESSFUL SOFT RESET
SCSI PARITY ERROR
INITIATOR DETECTED ERROR MESSAGE RECEIVED
INVALID MESSAGE ERROR
20
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
COMMAND PHASE ERROR
4A
4B
4C
4D
4E
51
51
53
53
55
00
00
00
NN
00
00
01
00
02
00
00
00
01
02
03
00
01
02
03
00
01
DATA PHASE ERROR
LOGICAL UNIT FAILED SELF-CONFIGURATION
TAGGED OVERLAPPED COMMANDS (NN=QUEUE TAG)
OVAERLAPPED COMMANDS ATTEMPTED
ERASE FAILURE
ERASE FAILURE - Incomplete erase operation detected
MEDIA LOAD OR EJECT FAILED
MEDIUM REMOVAL PREVENTED
SYSTEM RESOURCE FAILURE
57
UNABLE TO RECOVER TABLE-OF-CONTENTS
OPERATOR REQUEST OR STATE CHANGE INPUT
OPERATOR MEDIUM REMOVAL REQUEST
OPERATOR SELECTED WRITE PROTECT
OPERATOR SELECTED WRITE PERMIT
LOG EXCEPTION
THRESHOLD CONDITION MET
LOG COUNTER AT MAXIMUM
LOG LIST CODES EXHAUSTED
5A
5A
5A
5A
5B
5B
5B
5B
5D
5D
FAILURE PREDICTION THRESHOLD EXCEEDED -
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Media
Failure
5D
03
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Spare
Area Exhaustion
5D
5E
5E
5E
5E
5E
63
64
64
65
72
72
72
72
72
72
73
73
73
73
73
73
73
B6
B9
80
FF
00
01
02
03
04
00
00
01
00
00
01
02
03
04
05
00
01
02
03
04
05
06
00
00
FF
FAILURE PREDICTION THRESHOLD EXCEEDED (FALSE)
LOW POWER CONDITION ON
IDLE CONDITION ACTIVATED BY TIMER
STANDBY CONDITION ACTIVATED BY COMMAND
IDLE CONDITION ACTIVATED BY COMMAND
STANDBY CONDITION ACTIVATED BY COMMAND
END OF USER AREA ENCOUNTERED ON THIS TRACK
ILLEGAL MODE FOR THIS TRACK
INVALID PACKET SIZE
VOLTAGE FAULT
SESSION FIXATION ERROR
SESSION FIXATION ERROR WRITING LEAD-IN
SESSION FIXATION ERROR WRITING LEAD-OUT
SESSION FIXATION ERROR - INCOMPATIBLE TRACK IN SESSION
EMPTY OR PARTIALLY WRITTEN RESERVED TRACK
NO MORE RZONE RESERVATIONS ARE ALLOWED
CD CONTROL ERROR
POWER CALIBRATIOIN AREA ALMOST FULL
POWER CALIBRATION AREA IS FULL
POWER CALIBRATION AREA ERROR
PROGRAM MEMORY AREA UPDATE FAILURE
PROGRAM MEMORY AREA/RMA IS FULL
PROGRAM MEMORY AREA/RMA IS (almost) FULL
MEDIA LOAD/EJECT MECHANISM FAILED
PLAY OPERATION ABORTED
VENDOR SPECIFIC
21
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
Specifications
BluRay Recorder Drive: BD-R/BD-RE, DVD-+R/RW/DL, and CD-R/RW
Power Source:
Weight:
115V/230V 50-60Hz switchable power supply
58 pounds
Dimensions:
Power supply:
Environment:
7.48” (W) x 16.75” (D) x 24.5” (H)
400W
Temperature: 40°C (104°F) / 5°C (41°F)
Humidity: 20% - 80%
Supported Formats
BD
DVD
BD-ROM, BD-R, BD-RE
DVD-ROM, DVD-+R/RW/DL, DVD-VIDEO
CD-ROM Mode 1, CD-ROM XA Mode 2 (form 1, form 2),
Photo CD, CD-DA (Audio CD), CD-Extra, CD-R, CD-RW
25GB for BD-R,
Recording format
CD
BD
24.2GB for BD-RE
Recording capacity (nominal)
4.7GB for General DVD
8.3GB for Dual Layer
DVD
CD
BD
700MB
BD-R, BD-RE
Applicable media
DVD
CD
DVD-+R, DVD-+RW, DVD-+R DL
CD-R, CD-RW
Firmware Updates
Occasionally it may be necessary to load updated firmware on to the BluRay Series duplicator.
Only those firmware versions recommended and provided by Microboards Technical Support for
this specific product should be installed. Installation of an incorrect firmware on any Microboards
Technology product may result in any remaining warranty being voided.
Technical Support
For technical questions or support issues, contact Microboards Technology technical support:
United States
PH: 952-556-1639
FAX: 952-556-1628
Europe
PH: +44 (0) 845 230 7800
Japan
PH: 03-3561-2266
Please have the Model and Serial Number of your product available when contacting Technical
Support.
22
BluRay Series
MICROBOARDS TECHNOLOGY, LLC
Any unauthorized modification to this equipment may result in the revocation by the FCC of the user’s
authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and antenna
Connect the equipment into an outlet on a circuit different than that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
This product is in conformity with the EMC Directive (89/336/EEC) through compliance with the following European
standards: EN 55022, EN 55024. The CE mark has been affixed in accordance with the CE Marking Directive
93/68/EEC.
Canadian Department of Communications (DOC) Statement
This Class B digital apparatus complies with the Canadian ICES-003 Issue 4:2004. Cet appareil numerique de la classe B est conforme a
la norme NMB-003 du Canade.
23
|