Magnavox MWC20D6 User Manual

20 inch COLOR TV/DVD

Owner’s Manual

MWC20D6

FEATURES

• Auto Channel Programming

• Screen Saver

• Auto Power Off

• Parental Lock

• Resume Play

• Closed Caption Decoder

• Virtual Surround

SUPPLIED ACCESSORIES

This unit comes with the following accessories. Please confirm that

all the accessories are included.

Owner's Manual

P Remote Control

P AA batteries x 2

P Owner’s Manual

(NF102UD)

(1EMN22003)

INSTRUCCIONES EN ESPAÑOL INCLUIDAS

PLEASE READ BEFORE USING THIS EQUIPMENT

IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING

AFTER READING OWNER’S MANUAL,

PLEASE CALL TOLL FREE 1-800-605-8610 OR VISIT OUR WEB SITE AT

http://www.funai-corp.com

14. Lightning - For added protection for this unit receiver during

a lightning storm, or when it is left unattended and unused

for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the unit due to lightning and power-line surges.

15. Power Lines - An outside antenna system should not be

located in the vicinity of overhead power lines or other elec-

tric light or power circuits, or where it can fall into such power

lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such

power lines or circuits as contact with them might be fatal.

16. Overloading - Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry - Never push objects of any kind

into this unit through openings as they may touch dangerous

voltage points or short out parts that could result in a fire or

electric shock. Never spill liquid of any kind on the unit.

18. Servicing - Do not attempt to service this unit yourself as

opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified ser-

vice personnel.

a. When the power-supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have fallen into the unit.

c. If the unit has been exposed to rain or water.

d. If the unit does not operate normally by following the operat-

ing instructions. Adjust only those controls that are covered

by the operating instructions, as improper adjustment of

other controls may result in damage and will often require

extensive work by a qualified technician to restore the unit to

its normal operation.

e. If the unit has been dropped or damaged in any way.

f. When the unit exhibits a distinct change in performance, this

indicates a need for service.

20. Replacement Parts - When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer that have the same character-

istics as the original part. Unauthorized substitutions may

result in fire, electric shock, injury to persons or other haz-

ards.

21. Safety Check - Upon completion of any service or repairs to

this unit, ask the service technician to perform routine safety

checks to determine that the unit is in proper operating con-

dition.

22. Heat - This unit product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

19. Damage Requiring Service - Unplug this unit from the wall

outlet and refer servicing to qualified service personnel

under the following conditions:

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellec-

tual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is

intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful interference to radio commu-

nications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-

ment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to

this equipment may cause harmful interference unless the modifications are expressly approved in the

owner’s manual. The user could lose the authority to operate this equipment if an unauthorized change or

modification is made.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service

this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.

DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE

DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQU'AU FOND.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guide-

lines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding system

of the building as close to the point of cable entry as practical.

LOCATION

For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place

for its installation:

• Shield it from direct sunlight and keep it away from sources of intense heat.

• Avoid dusty or humid places.

• Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the

top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.

• Install unit in a horizontal position.

• Avoid locations subject to strong vibration.

• Do not place the unit near strong magnetic fields.

• Avoid moving unit to locations where temperature differences are extreme.

• Be sure to remove disc and unplug the AC power cord from the outlet before carrying the unit.

TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our

Authorized Service Center for servicing.

• Do not put your fingers or objects into the unit disc loading tray.

• Do not place anything directly on top of the unit.

MOISTURE WARNING

• Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or

after heating a cold room or under conditions of high humidity. If you play a DVD or Audio CD in a moist

unit, it may damage the DVD or Audio CD and the unit. When the condensation occurs inside the unit, turn

the unit on and leave it at least 2 hours to dry out.

NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in

accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-

tions concerning chemical wastes.

Manufactured under license from Dolby Laboratories.

"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

The serial number of this product may be found on the back of the unit. No other unit has the same serial

number as yours. You should record the number and other vital information here and retain this book as a

permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

ABLE OF CONTENTS

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . .2

PREPARATION FOR USE . . . . . . . . . . . . . . . . . .6

ANTENNA/CABLE CONNECTIONS . . . . . . . . . . . .6

CONNECTING TO AN EXTERNAL DEVICE (FRONT) . .6

CONNECTING TO A DIGITAL AUDIO DEVICE (REAR) .7

INSTALLING THE BATTERIES IN REMOTE CONTROL .7

OPERATING CONTROLS AND FUNCTIONS . . .8

SPECIAL PLAYBACK FUNCTIONS & SETTINGS . . .16

FUNCTION TABLE . . . . . . . . . . . . . . . . . . . . . . . .16

AUDIO MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

SUBTITLE LANGUAGE . . . . . . . . . . . . . . . . . . . . .17

ANGLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

BLACK LEVEL MENU . . . . . . . . . . . . . . . . . . . . . .18

V.S.S. (Virtual Surround System) . . . . . . . . . . . . . .18

SEARCH MENU . . . . . . . . . . . . . . . . . . . . . . . . . .18

REPEAT PLAYBACK . . . . . . . . . . . . . . . . . . . . . . .19

PROGRAMMED PLAYBACK . . . . . . . . . . . . . . . . .20

RANDOM PLAYBACK . . . . . . . . . . . . . . . . . . . . . .20

ON-SCREEN INFORMATION . . . . . . . . . . . . . .20

CHANGING THE DVD SET UP ITEMS . . . . . . .21

CUSTOM MENU . . . . . . . . . . . . . . . . . . . . . . . . . .21

INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

TV SECTION

TV OPERATION AND SETTINGS . . . . . . . . . . . .9

INITIAL SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . .9

WATCHING A TV PROGRAM . . . . . . . . . . . . . . . . .9

SLEEP TIMER / PICTURE CONTROL . . . . . . . . . .10

CLOSED CAPTION SYSTEM . . . . . . . . . . . . . . . .10

CHANNEL SET UP . . . . . . . . . . . . . . . . . . . . . . . .11

ON-SCREEN MENU LANGUAGE . . . . . . . . . . . . .11

V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . . . .12

TROUBLESHOOTING GUIDE . . . . . . . . . . . . . .24

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . .26

APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

CABLE CHANNEL DESIGNATIONS . . . . . . . . . . .27

LANGUAGE CODE LIST . . . . . . . . . . . . . . . . . . . .27

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . .28

DVD SECTION

ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . .14

PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . . .14

UNPLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . .14

PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . .15

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .15

DISC MENU / TITLE MENU . . . . . . . . . . . . . . . . . .15

ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . .29

WARRANTY . . . . . . . . . . . . . . . . . . . .Back Cover

SYMBOLS USED IN THIS MANUAL

The following symbols below appear in some headings and notes in this manual, with the following meanings.

Description refers to TV operation

(in the TV mode).

Description refers to playback of

audio CDs (in the DVD mode).

Description refers to playback of

DVD video discs (in the DVD mode).

Description refers to the items

to be set by the QUICK mode

(in the DVD mode).

QUICK

REPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

Plug the incoming cable into the ANT. jack on the rear of the unit.

If your cable service supplies you with a converter box or if you use a satellite system, connect the box with

this unit as shown below.

Cable

TV signal

Antenna

Rear of the unit

ANT.

COAXIAL

Incoming cable from home

Antenna / Cable Company

(No Cable Box)

ANT.

Cable Box or Satellite Box*

*NOTE

OUT

(DO NOT DISCONNECT FROM BOX)

Some cable TV systems use scrambled

signals and require a special converter to

receive these channels. Consult your local

cable company.

Incoming cable from Cable Company

or Satellite Antenna

NOTE:

Bent pin

For your safety and to

Before plugging the antenna into

the ANT. jack of the unit, check

that the pin is not bent. If it is bent,

straighten the pin as illustrated,

then plug the pin into the ANT. jack

of the unit.

avoid damages to the unit,

unplug the antenna cable

from the ANT. jack before

Cable

Plug

(Needs to be

straightened)

(Straight pin)

moving the unit.

CONNECTING TO AN EXTERNAL DEVICE (FRONT)

Use the AUDIO/VIDEO input jacks on the front of the unit when connecting your TV to an

external video device (VCR, Camcorder or Game Console).

Connect the Audio/Video output jacks of the external source to the AUDIO L/R and VIDEO

input jacks of this unit.

AUX

Then use [SELECT] or [CH. K / L] until "AUX" appears on the screen.

(Refer to "TO WATCH EXTERNAL INPUT" on page 9.)

ex.

VCR or video camera, etc.

[Front of the unit]

To the Audio output jacks

ex.

Headphone

Audio Cable

(OUT) (commercially available)

(IN)

To the Video output jack

• To connect a headphone

(not supplied) for personal

listening.

Video Cable

(commercially available)

(OUT)

NOTE:

When you connect a monaural VCR (external source) to this unit, connect the Audio output jack of the monaural VCR

(external source) to the AUDIO L jack of this unit. The audio will output in both L and R channel equally.

CONNECTING TO A DIGITAL AUDIO DEVICE (REAR)

You can connect this unit to a digital audio device to enjoy the digital audio of DVD. Connect to an amplifier

equipped with digital input jacks, such as MD deck or DAT deck. To play a DVD disc in a Dolby Digital Multi-

channel surround format in this unit, connect to a Dolby Digital decoder.

Use an audio coaxial digital cable (commercially available) for the audio connections.

ANT.

COAXIAL

(OUT)

To COAXIAL jack

(DVD AUDIO OUT only)

Dolby Digital

decoder

To Coaxial digital

Audio input jack

(IN)

Audio coaxial

digital cable

(commercially

available)

ex.

MD deck,

DAT deck, etc.

To Coaxial digital

Audio input jack

(IN)

NOTES:

• The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an

MD or DAT deck.

• Be sure to turn off the power to all devices in the system before connecting another device.

• Refer to the Owner's Manuals for the devices to be connected to the unit.

• To connect to a MD or DAT deck, set "DOLBY DIGITAL" to "PCM" for the audio output in the setup mode, and to con-

nect to a Dolby Digital decoder, set to "BITSTREAM". (Refer to "AUDIO SETTING" on page 22.) Playing a unit using

incorrect settings may generate noise distortion and may also damage the speakers.

INSTALLING THE BATTERIES IN REMOTE CONTROL

1) Open the battery compartment cover by pressing

[BATTERY PRECAUTIONS]

the cover on the remote unit in the direction of

the arrow.

2) Insert 2 “AA” batteries into the battery compart-

ment in the direction indicated by the polarity

(+/-) markings.

Be sure to follow the correct polarity as indicat-

ed in the battery compartment. Reversed batter-

ies may cause damage to the device.

•

Do not mix different types of batteries together

(e.g. Alkaline and Carbon-Zinc) or old batteries

with fresh ones.

3) Replace the cover.

If the device is not to be used for a long period

of time, remove the batteries to prevent damage

or injury from possible battery leakage.

Do not try to recharge batteries not intended to

be recharged; they can overheat and rupture.

PERATING CONTROLS AND FUNCTIONS

- CONTROL PANEL -

STANDBY-ON

OPEN/CLOSE

VIDEO

AUDIO

HEADPHONE

VOLUME

CH.

SELECT

STOP

PLAY

4 5 6 7

8 9 10 11

- REMOTE CONTROL

[REMOTE CONTROL]

12 STANDBY-ON y Button [TV P.9 / DVD P.15]

13 PICTURE/SLEEP Button [TV P.10]

14 Number Buttons [TV P.9 / DVD P.18]

15 DISPLAY Button [DVD P.20]

16 PREV H Buttons [DVD P.18]

17 NEXT G Button [DVD P.18]

18 PLAY B Button [TV P.9 / DVD P.15]

19 PAUSE F Button [DVD P.15]

20 TITLE Button [DVD P.15]

21 CLEAR Button [TV P.10 / DVD P.18]

22 MODE Button [DVD P.16]

23 OPEN/CLOSE A Button [DVD P.15]

24 SELECT Button [TV P.9]

OPEN/

STANDBY-ON

PICTURE/

SLEEP

SELECT

CH.

VOL.

DISPLAY

+100

+10

SET-UP

MUTE

PLAY

FWD

REW

STOP

25 CH.

Buttons [TV P.9]

SLOW

PAUSE

TITLE

DISC MENU

26 VOL.

ENTER

CLEAR

MODE

27 MUTE Button [TV P.9]

28 SET-UP Button [TV P.10 / DVD P.21]

29 REW E Button [DVD P.15]

FWD D Button [DVD P.15]

RETURN

30 STOP C Button [DVD P.15]

31 DISC MENU Button [DVD P.15]

32 ENTER Button [TV P.10 / DVD P.17]

[CONTROL PANEL]

01 y STANDBY-ON Button [TV P.9 / DVD P.15]

/{ / B Buttons [TV P.10 / DVD P.15]

34 RETURN Button [DVD P.17]

02 Disc loading tray

03 VOLUME

Buttons [TV P.9]

NOTES:

04 CHANNEL SELECT Button [TV P.9]

05 STOP C Button [DVD P.15]

06 PLAY B Button [TV P.9 / DVD P.15]

07 Remote sensor window

08 OPEN/CLOSE A Button [DVD P.15]

09 VIDEO input Jack [P.6]

• We do not recommend the use of universal remote con-

trols as it may not control all the functions. Note that the

code number given by universal remote controls may

not program to this unit. For more details, contact the

manufacturer of the universal remote control.

• Unless stated, all operations described are based on

remote control use. Some operations can be carried

out using the menu bar on the TV screen.

10 AUDIO L/R input Jacks [P.6]

11 HEADPHONE Jack [P.6]

TV SECTION

V OPERATION AND SETTINGS

INITIAL SET UP

WATCHING A TV PROGRAM

When you turn on the power for the first time,

1 Press [STANDBY-ON y] to turn on the unit.

the SELECT LANGUAGE screen is displayed.

Select the language for screen display and perform

auto programming of the channels.

NOTES:

HELPFUL HINTS

1.PLEASE CHECK TO SEE IF

THE ANTENNA/CABLE/

SATELLITE IS

PROPERLY CONNECTED.

2.DID YOU PERFORM

• If the TV screen shows snow and

there is no operation for more

than 10 seconds,

“AUTO CH PROGRAMMING”?

3.PLEASE REFER TO FRONT

PAGE OF THE OWNER’S

MANUAL OR REAR PANEL

FOR SUPPORT LINE

1 After antenna or cable connection is

completed, connect the power cord into

a standard AC outlet.

“HELPFUL HINTS” appears.

INFORMATION.

• Make sure the antenna or cable is connected

properly. (Refer to “ANTENNA/CABLE CONNEC-

TIONS on page 6.)

2 Press [STANDBY-ON y] to turn on the unit.

• Set the“AUTO CH PROGRAMMING” in the

CHANNEL SET UP. (Refer to “CHANNEL SET UP”

on page 11.)

• If those settings do not work properly, please

call our help line on the front page of this owner’s

manual.

3 Press one of the keys listed

SELECT LANGUAGE

below to select the language

ENGLISH

NEXT:PRESS VOL

of on-screen menu.

• ENGLISH :[VOL.

• ESPAÑOL :[VOL.

ESPAÑOL

DESPUÉS:PRESIONE VOL

FRANÇAIS

APRÈS:PRESSEZ CH.

]

] or the Number buttons to

2 Use [CH.

]

select your desired channel number.

• FRANÇAIS :[CH.

To use the Number buttons

•Single digit channels: (Ex. 02, 03, 04 and so on)

Press [0] first to select a single digit channel.

4 Confirm the antenna (or cable)

– INITIAL SETUP –

connection and press [PLAY B].

PLEASE CONNECT ANTENNA

OR CABLE OR SATELLITE

TO THIS UNIT.

THEN PRESS PLAY,

IN ORDER TO PERFORM

“AUTO CH PROGRAMMING”

•Two digit channels: (Ex. 12, 38, 95 ...)

Press two digits directly.

• The tuner scans and memori-

zes all active channels in

your area.

•Three digit channels: (Ex. 115, 125 ...)

Press [+100] first, then press the last two digits.

5 When the scanning is comple-

ted, the tuner stops on the

lowest memorized channel.

CH 15

] to adjust the volume.

3 Use [VOL.

(Example)

Press [MUTE] to instantly

mute the sound. Press it again

to restore the previous sound

level.

VOLUME 20

NOTES:

• You can exit the INITIAL SETUP menu by pressing

[SET-UP]. If the button is pressed during channel

scanning, the tuner stops scanning and the lowest

memorized channel is displayed.

NOTE:

• Even if you turn off the unit in the DVD mode, the unit

will be in the TV mode when you turn it on again.

• The INITIAL SETUP menu is displayed every time

you turn on the unit unless the scanning is com-

pleted.

TO WATCH CABLE OR SATELLITE CHANNEL

• In case no channel can be

received by the channel scanning,

"NO TV SIGNALS" is displayed on

the screen. Turn off the unit and

check the antenna connection,

then follow steps 1 to 5 again.

If the unit is connected to a cable box or satellite

box, use [CH. K / L] to select CH3 or CH4 accord-

ing to the output channel setting of the device, then

select the desired channel on that device.

NO TV SIGNALS

TO WATCH EXTERNAL INPUT

• You can change the setting after completing INI-

TIAL SET UP by LANGUAGE menu or CHANNEL

SET UP menu. (Refer to "ON-SCREEN MENU LAN-

GUAGE" or "CHANNEL SET UP" on page 11).

• If there is no signal input from the antenna terminal

and no operation for 15 minutes, the unit will turn itself

off automatically.

When an external device is

connected to the front AUDIO/

AUX

VIDEO input jacks, press

[SELECT] or [CH. K / L] repeat-

edly until "AUX" appears on the

screen.

TV SECTION

TV OPERATION AND SETTINGS

SLEEP TIMER / PICTURE CONTROL

CLOSED CAPTION SYSTEM

You can set Sleep Timer and picture

adjustment with [PICTURE / SLEEP].

You can view specially labeled (cc) TV pro-

grams, movies, news and pre-recorded tapes with

either a dialogue caption or text display.

• The menu changes as described below every time

you press [PICTURE / SLEEP].

1 Press [SET-UP].

- TV SETUP -

CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

Sleep Timer

BRIGHT

CONTRAST

COLOR

Use [K / L] to point to

"CAPTION".

SHARPNESS

TINT

- TV SETUP -

2 Press [ENTER] repeatedly to

select your desired caption

mode.

SLEEP TIMER SETTING

CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [CAPTION1]

The Sleep Timer function is used to turn off the

unit without pressing [STANDBY-ON y] after a

desired time.

• CAPTION mode (1, 2): You can watch dramas, movies

and news while captioning the dialogues and the

contents of news.

1 Press [PICTURE / SLEEP] to

SLEEP 0 MINUTE

• TEXT mode (1, 2): You can watch half screen text

display the Sleep Timer menu.

information if you want.

2 Within 10 seconds, set your desired sleep time

*"CAPTION2" is usually used for a second language (if

available).

using [s / B].

[B]...Increase by 10 min. (Up to 90 min.)

[s]...Decrease by 10 min.

3 ^Press[SET-UP] to exit the menu.

NOTES:

NOTE:

• Even if a power failure occurs, the unit will retain its

memory for this feature.

• To cancel the Sleep Timer, use [CLEAR] or [s / B]

to set the time to "0".

• Some programs are not broadcasted with closed

captions. The unit is designed to provide error-free

closed captions with high quality antenna, cable and

VCR signals. Conversely, poor quality signals are

likely to result in caption errors or no captions at all.

3 To confirm the remaining time to shutdown,

press [PICTURE / SLEEP].

• Common signal conditions which may cause caption

errors are listed below:

PICTURE CONTROL

The picture controls are preset to factory defaults,

but you can change them to your desired setting.

- Weak snowy reception on TV screen

- Multiplex signal reception displaying picture

ghosts or airplane flutter

1 Press [PICTURE / SLEEP]

BRIGHT

• If the unit displays a black box

on the TV screen, this means

that the unit is set to the TEXT

mode. To clear screen, select

"CAPTION1", "CAPTION2" or

"OFF".

–

P +

repeatedly until desired control

is displayed.

2 Use [s / B] to adjust to your desired level within

5 seconds.

• Even if a power failure occurs, the unit will

retain its memory for this feature.

TO CANCEL THE CLOSED CAPTION SYSTEM

1 Press [SET-UP]. Use [K / L] to point to

BRIGHT

to decrease brightness to increase brightness

"CAPTION".

CONTRAST to decrease contrast to increase contrast

COLOR

TINT

SHARPNESS to soft

to pale

to brilliant

to green

to clear

2 Press [ENTER] repeatedly to select "OFF".

to purple

3 Press [SET-UP] to exit the menu.

CHANNEL SET UP

4 Press [ENTER] repeatedly. The channel number

changes between red (deleted) and blue (added)

every time you press the button.

^{Channel presetting is necessary at the start or}

in case you moved the TV to a different area.

• To delete or add another channel, repeat steps 3

to 4.

AUTO CHANNEL PROGRAMMING

1 Press [SET-UP].

- TV SETUP -

CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

5 ^Press[SET-UP] to exit the menu.

Use [K / L] to point to

NOTE:

"CHANNEL SET UP", then

press [ENTER].

• To confirm that channel(s) has (have) been deleted

or added, select it (them) using [CH. K / L].

2 Use [K / L] to point to "AUTO

CH PROGRAMMING", then

press [ENTER].

– CHANNEL SET UP –

ADD/DELETE CH (CATV)

AUTO CH PROGRAMMING

ON-SCREEN MENU LANGUAGE

The tuner scans and memorizes all the active

channels in your area.

You can select the language of on-screen

menu among English, Spanish and French.

3 When the scanning is comple-

CH 15

ted, the lowest memorized

channel is displayed.

1 Press [SET-UP].

- TV SETUP -

CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

Use [K / L] to point to

(Example)

"LANGUAGE".

If "NO TV SIGNALS" appears on

the TV screen, check the antenna

connection and try again.

NO TV SIGNALS

NOTES:

2 Press [ENTER] repeatedly to select "ENGLISH",

• The unit may recognize CATV channels to be TV

channels if reception condition is poor. In this case,

check the antenna connection and try "AUTO CH

PROGRAMMING" again.

"ESPAÑOL" or "FRANÇAIS".

3 Press [SET-UP] to exit the menu.

NOTES:

• Auto channel programming is NOT necessary

when connected to a cable box or satellite box.

Just select the channel for cable box or satellite

input (ex. CH3 or CH4) on the unit, then select your

desired channel on the cable box or satellite box.

• This function effects only the language of the screen

menu and not the audio source.

• If for some reason the menu is already in Spanish or

French, press [SET-UP], using [K / L] point to

"IDIOMA [ESPAÑOL]" or "LANGAGE [FRANÇAIS]",

then press [ENTER] repeatedly to select desired lan-

guage, then press [SET-UP].

ADDING/DELETING CHANNELS

You can add channels that were not memorized due

to the bad reception status and also delete chan-

nels you no longer receive or seldom watch.

1 Press [SET-UP].

- TV SETUP -

CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

Use [K / L] to point to

"CHANNEL SET UP", then

press [ENTER].

2 Use [K / L] to point to

"ADD/DELETE CH", then

press [ENTER].

– CHANNEL SET UP –

ADD/DELETE CH (CATV)

AUTO CH PROGRAMMING

3 Use the Number buttons or

[CH. K / L] to select your

desired channel number.

(You can also use [K / L] to

enter it.)

ADD / DELETE

(Example: CH8)

• Refer to "To use the Number

buttons" on page 9.

TV SECTION

TV OPERATION AND SETTINGS

TV RATING SET UP

V-CHIP SET UP

4 Use [K / L] to select a rating

This feature enables parents to prevent their

children from watching inappropriate material on

TV. When you try to access a blocked program,

“PROTECTED PROGRAM by ...” message appears

on the TV screen.

TV–Y

TV–Y7

TV–G

TV–PG (

TV–14

TV–MA(

[VIEW]

that you wish to block.

(

)

Press [ENTER] repeatedly to

set it to "BLOCK" or "VIEW".

(

Selection Rating Category Explanations

TV-Y

NOTE:

• To change the rating, the TV

must be turned to an unprotect-

ed program. If the screen on the

right is displayed, change the

channel to a station that is not

protected.

Appropriate for all children

Appropriate for children 7 and older

General Audience

Parental Guidance suggested

Unsuitable for children under 14

Mature audience only

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

PROTECTED PROGRAM

by TV-Y

1 Press [SET-UP].

NOTES:

- TV SETUP -

Use [

K / L] to select

• When you select a rating and set

it to "BLOCK", the higher ratings

will be blocked automatically.

The lower ratings will be avail-

able for viewing.

CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

TV–Y

TV–Y7

TV–G

TV–PG (DLSV)

TV–14 (DLSV)

TV–MA ( LSV)

[VIEW]

[BLOCK]

"V-CHIP SET UP", then press

[ENTER].

(

)

2 Use the Number buttons to

ACCESS CODE

• When you set "TV-MA" to

"VIEW", all ratings will turn to "VIEW"

automatically.

enter the access code.

• For the first time set-up or in

the event the unit has lost

power, enter the default code of 0000.

5 The TV-Y7, TV-PG, TV-14 and

TV-MA ratings have the option

TV–Y

TV–Y7

TV–G

TV–PG (

TV–14

TV–MA(

[VIEW]

3 Use [K / L] to select

(

)

– V-CHIP SET UP –

of sub rating categories.

Use [K / L] to select a rating

with sub-ratings, then press

[ENTER] twice.

)

"TV RATING", "MPAA RATING"

or "CHANGE CODE",

then press [ENTER].

(

B TV RATING

MPAA RATING

CHANGE CODE

Refer to the pages below to

set up each item.

6 Use [K / L] to select a sub-

rating, then press [ENTER] to

set it to "BLOCK" or "VIEW".

• TV RATING

• MPAA RATING

: P.12

: P.13

TV–PG

[BLOCK]

• CHANGE CODE : P.13 C

NOTE:

TV–Y

TV–Y7

TV–G

TV–PG (DLSV)

TV–14 (DLSV)

TV–MA ( LSV)

[VIEW]

• The blocked sub-ratings will

appear next to the rating cate-

gory in the "TV RATING" menu.

(

)

[VIEW]

[BLOCK]

Selection Rating Category Explanations

TV-Y7

Fantasy Violence

TV-PG, TV-14, TV-MA

Suggestive Dialog (TV-PG, TV-14 only)

Coarse Language

Sexual Situation

Violence

7 Press [SET-UP] to exit the menu.

MPAA RATING SET UP

4 Use [K / L] to point to your

desired item, then press

[ENTER] to select "BLOCK"

or "VIEW".

[VIEW]

PG–13

NC–17

[VIEW]

[BLOCK]

Selection Rating Category Explanations

General Audience

PG-13

Parental Guidance suggested.

Unsuitable for children under 13

Restricted; under 17 requires acco-

mpanying parent or adult guardian

No one under 17 admitted

NC-17

Mature audience only

5 Press [SET-UP] to exit the menu.

NOTES:

• When you select a rating and set it to "BLOCK", the

higher ratings will be blocked automatically.

The lower ratings will be available for viewing.

• When you set "X" to "VIEW", all ratings will turn to

"VIEW" automatically.

CHANGE ACCESS CODE

4 Use the Number buttons to

enter your desired access

code in the "NEW CODE",

NEW CODE

X X X X

then enter the same code in

the "CONFIRM CODE". When

CONFIRM CODE

completed, the menu will

return to "V-CHIP SET UP".

5 Press [SET-UP] to exit the menu.

NOTE:

• Your personal access code will be erased and will

return to the default (0000) when a power failure

occurs or when you turn off the power using a wall

switch. If you forget the code, unplug the power cord

for 10 seconds to restore the access code to 0000.

DVD SECTION

BOUT THE DISCS

PLAYABLE DISCS

Playable

discs

Region Recorded Disc

Mark (logo)

Disc types

code

signals size

DVD-Video

*1,2,4,6,10,11

Digital

12 cm

Example

DVD-RW

DVD-R

Title 1

Title 2

video

Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1

Chapter 2

(MPEG2)

8 cm

*1,3,4,5,6,

7,9,10

DVD+RW

DVD+R

*1,3,4,5,6,8,9,10

Audio CD

*4,6,10

Example

12 cm

8 cm

Digital

audio

CD-RW

CD-R

Track 1

Track 2

Track 5

Track 6

Track 3

Track 4

*4,5,6,9,10

is a trademark of DVD Format/Logo Licensing Corporation.

If you cannot play back a disc which bears one of the marks above, check the following notes.

*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot

be played back.

*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc's producers.

*3: Discs recorded in the VR (Video Recording) format cannot be played back.

*4: Scratched or stained discs may not be played back.

*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the

recorder or special properties of discs.

*6:You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may

not play them back. Even if they are played back, the sound or video quality will be compromised.

*7:You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand's DVD

recorder. However, depending on the recording status of a disc, the disc may not be played back at all

or normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc

with the DVD recorder. Refer to the manual accompanying the DVD recorder.

*8: Only the discs recorded in the video format and finalized can be played back.

Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not

be played back at all or normally (the picture or sound may not be smooth, etc.).

*9: If the recorded portion of the disc is too small (less than 2-3/16" (55mm) across), it may not play back

properly.

*10: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read

it correctly.

*11: The number inside the globe symbol refers to a region of the world. A disc encoded in a specific region

format can only be played back on units with the same region code.

UNPLAYABLE DISCS

• NEVER play back the following discs. Otherwise, malfunction may result!

DVD-RAM / CD-i / Photo CD / Video CD / DVD-Audio / DVD with region codes other than 1 or ALL /

DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / CD-RW/-R with MP3 files

• The sound MAY NOT be heard: Super Audio CD

NOTE:

Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density Super Audio

CD layer cannot be delivered.

• Any other discs without compatibility indications

LAYING A DISC

FAST FORWARD / FAST REVERSE

BASIC PLAYBACK

• During playback, press [FWD D]

for fast forward or [REW E] for fast

reverse.

1 Press [STANDBY-ON] to turn on

the unit.

• Every time you press the button,

playback speeds up and the level

of the speed appears on the

screen.

2 Press [OPEN/CLOSE A].

3 Place the disc in the tray, with

the label facing up.

NOTES:

• For DVDs, fast forward/reverse speed is different

depending on the disc. Approximate speed is 1 (×2),

2 (×8), 3 (×20), 4 (×50) and 5 (×100).

4 Press [PLAY B].

• The tray will close automatically and playback will

start. When you play back a DVD which features a

title menu, it may appear on the screen.

• For Audio CDs approximate speed is 1 (×2), 2 (×8)

and 3 (×30).

• To return to normal playback, press [PLAY B].

NOTES:

• Closing the disc tray manually or by pressing

[OPEN/CLOSE A] also starts playback.

SLOW FORWARD / SLOW REVERSE

• With DVDs that use titles for playback program signals,

playback may start from the second title or it may skip

these titles.

• During playback, press [PAUSE F].

• Press [FWD D] for slow forward or

[REW E] for slow reverse.

5 To freeze the picture, press [PAUSE F] during

• Every time you press the button,

playback.

playback is slowed down and the

level of the speed appears on the

screen.

NOTE:

• The sound will be muted in pause mode.

NOTE:

6 Press [STOP C] to stop

• Slow forward / reverse speed varies with the disc.

Approximate speed is 1 (1/16), 2 (1/8) and 3 (1/2).

playback temporarily.

Resume ON

Press 'PLAY' to play from here.

To play the beginning,

press 'STOP' first and then 'PLAY'.

• Press [PLAY B] to resume

the playback.

• To return to normal playback, press [PLAY B].

• To cancel resume and stop the

disc, [STOP C] again.

DISC MENU / TITLE MENU

DVD may contain menus to navigate the

disc and access special features.

NOTES:

• The resume information stays on even if the unit is

turned off.

• A "prohibited icon" may appear

at the top-right on the TV screen

during operation. This means

1 Press [DISC MENU] or [TITLE].

• The DVD main menu / the title menu will appear.

• You can call up the menu even during playback.

that the operation is not available on the disc.

STEP BY STEP PLAYBACK

2 Use [

s / B] to select an item, and press

[ENTER].

• During playback, press [PAUSE F].

You can advance the picture frame by

frame by pressing [PAUSE F] repeatedly.

NOTES:

• If disc menu is available on the disc, audio language,

subtitle options, chapters for the title and other

options will appear for selection.

• To return to normal playback, press [PLAY B].

• Contents of menu and corresponding menu opera-

tions may vary between discs. Refer to the manual

accompanying the disc for details.

DVD SECTION

PECIAL PLAYBACK FUNCTIONS & SETTINGS

FUNCTION TABLE

The setting menu changes as described below every time you press [MODE] during playback.

See the reference page for how to set each menu. Some functions are not available in specific

modes, but this is not a malfunction.

DVD-V

Press [MODE]

AUDIO STREAM 1

...

AUDIO STREAM 8

STEREO

L-ch

R-ch

AUDIO MENU (P.17)

V.S.S. MENU (P.18)

SEARCH MENU (P.18)

REPEAT MENU (P.19)

A-B REPEAT MENU (P.19)

MENU OFF

OFF

SUBTITLE MENU (P.17)

SUBTITLE STREAM 1

....

SUBTITLE STREAM 32

TRACK SEARCH

TIME SEARCH

MARKER SEARCH

ANGLE 1

....

ANGLE 8

ANGLE MENU (P.17)

(If available)

OFF

TRACK

ALL

OFF

ZOOM MENU (P.17)

ZOOM 1 (×1.3)

ZOOM 2 (×2.0)

ZOOM 3 (×4.0)

OFF

A-

A-B

OFF

BLACK LEVEL MENU (P.18)

V.S.S. MENU (P.18)

OFF

SEARCH MENU (P.18)

CHAPTER SEARCH

TITLE SEARCH

TIME SEARCH

MARKER SEARCH

OFF

CHAPTER

TITLE

REPEAT MENU (P.19)

A-B REPEAT MENU (P.19)

MENU OFF

OFF

A-

A-B

ANGLE MENU

AUDIO MENU

Some DVD discs contain scenes which

have been shot from various angles and

you can change them as you like.

AUDIO LANGUAGE

You can select the audio language during DVD play-

back (if multi languages are available).

1 During playback, press

1 / 8 (ANGLE)

[MODE] repeatedly until

1.ENG Dolby D 3/2.1ch 48k/3

1 Press [MODE] during playback.

ANGLE menu appears.

2 Use [K / L] to select your desired angle.

] to select your desired language.

2 Use [

3 Press [RETURN] to exit the menu.

NOTES:

• This function may not work on some DVDs with mul-

tiple audio languages. In this case, set it on the disc

menu. (Operation varies depending on discs. Refer to

the manual of the disc.)

NOTE:

• If multiple angle function is not available, this menu

does not appear on the screen.

• When "NOT AVAILABLE" appears

(

)

NOT AVAILABLE AUDIO

on the TV screen, it means this

function is not available on the

disc.

ZOOM

The Zoom function allows you to enlarge

the video image and to pan through the

enlarged image.

3 Press [RETURN] to exit the menu.

STEREO SOUND MODE

1 During playback, press

You can select the sound output mode during CD

playback.

OFF (ZOOM)

[MODE] repeatedly until

ZOOM menu appears.

STEREO (AUDIO)

1 Press [MODE] during

2 Press [ENTER] repeatedly to select the required

playback.

zoom factor.

2 Use [K / L] to select the sound mode.

STEREO : stereo sound with left and right channels

OFF

ZOOM1(×1.3) ZOOM2(×2.0) ZOOM3(×4.0)

OFF (ZOOM)

ZOOM1

ZOOM2

ZOOM3

L-ch

R-ch

: left channel sound only

: right channel sound only

3 Press [RETURN] to exit the menu.

3 Use [K / L / s / B] to move the zoomed picture

across the screen.

SUBTITLE LANGUAGE

You can select a language for subtitles

during DVD playback (if available).

4 Press [RETURN] to exit.

• The zoomed position guide

appears on the right corner

of the TV screen in the zoom mode.

1 During playback, press

[MODE] repeatedly until

SUBTITLE menu appears.

1.ENG/6 (SUBTITLE)

NOTES:

• Zooming function does not work while disc menu is shown.

• Zooming function is not available on some discs.

• It may take several seconds to slide the zoomed picture.

• The picture may be distorted if you operate other

functions (ex. pause, fast forward etc.) repeatedly in

the zoom mode.

2 Use [K / L] to select your desired subtitle lan-

guage. To cancel subtitles, select "OFF".

3 Press [RETURN] to exit the menu.

• To cancel the zoom mode, repeat steps 1-2 and

press [ENTER] until "OFF" appears.

NOTES:

• This function may not work on some DVDs with mul-

tiple subtitle languages. In this case, set it on the disc

menu. (Operation varies depending on discs. Refer to

the manual of the disc.)

• If the selected language does not have a 3-letter

code, "---" will be displayed on the screen. (Refer to

"LANGUAGE CODE LIST" on page 27.)

DVD SECTION

SPECIAL PLAYBACK FUNCTIONS & SETTINGS

BLACK LEVEL MENU

SEARCH MENU

You can adjust the Black Level to make the

black parts of the picture brighter.

You can begin playback at a specific track, title,

chapter or from a specific point on a disc.

1 During playback, press

TRACK SEARCH

OFF (BLACK LEVEL)

[MODE] repeatedly until

BLACK LEVEL menu

appears.

1 During playback, press [MODE]

__/12 (SEARCH)

repeatedly until SEARCH

menu appears.

] to select "ON" or "OFF".

2 Use [

2 Within 60 seconds, use the Number buttons to

select the desired track number. Playback will

start from the selected track.

ON: Makes the dark parts brighter.

OFF: Shows the original picture as recorded.

(Initial setting)

NOTES:

3 Press [RETURN] to exit the menu.

• For single digit, press [0] first if the total number of

tracks on the disc is 10 or more.

NOTE:

• You can also skip tracks by using [PREV H ]

[NEXT G], or entering the desired track number

with the Number buttons.

• The setting will be saved even if the unit is turned off.

3 Press [RETURN] to exit the menu.

V.S.S. (Virtual Surround System)

You can enjoy surround-sound effects

over two speakers on this unit.

CHAPTER SEARCH

1 During playback, press

__/21 (SEARCH)

1 During playback, press

OFF (V.S.S.)

[MODE] repeatedly until

SEARCH menu appears.

V.S.S. menu appears.

2 Use the Number buttons to enter the desired

chapter number. Playback will start at the selected

chapter.

2 Use [K / L] to select the desired sound effect.

Natural effect

Emphasized effect

• Press [CLEAR] to erase the incorrect input.

OFF: No effect (Initial setting)

• For single digit, press [0] first if the total number of

chapters on the disc is 10 or more.

3 Press [RETURN] to exit the menu.

NOTES:

3 Press [RETURN] to exit the menu.

• When playing back 96kHz with Virtual Surround func-

tion, the sound will be down-sampled at 48kHz and

output as digital audio.

NOTE:

• You can also skip chapters by using [PREV H ]

[NEXT G], or entering the desired chapter number

with the Number buttons.

(for Audio CD play only)

• Virtual Surround System will be effective only when

you set the sound mode to "STEREO". (Refer to

"STEREO SOUND MODE" on page 17.)

TITLE SEARCH

1 During playback, press [MODE] repeatedly until

SEARCH menu appears.

] to display

_/2 (SEARCH)

2 Use [

TITLE SEARCH menu.

3 Use the Number buttons to enter the desired title

number. Playback will start at the selected title.

• Press [CLEAR] to erase the incorrect input.

• For single digit, press [0] first if the total number of

titles on the disc is 10 or more.

4 Press [RETURN] to exit the menu.

REPEAT PLAYBACK

TIME SEARCH

1 During playback, press [MODE] repeatedly until

REPEAT TRACK

SEARCH menu appears.

1 During playback, press

[MODE] repeatedly until

REPEAT menu appears.

OFF (REPEAT)

TOTAL

0:0 _:_ _

0:04:23

] repeatedly to

2 Use [

display TIME SEARCH menu.

2 Use [K / L] to select your desired repeat mode.

OFF : Repeat function off

TRACK : Current track repeat

3 Within 60 seconds, use the Number buttons to

enter a desired disc time. Playback will start at

the specified time.

ALL

: All track repeat

• Press [CLEAR] to erase the incorrect input.

NOTE:

• When there is no need to enter a number, "0"

appears automatically.

• Repeat Track setting will be cleared when moving to

another track.

4 Press [RETURN] to exit.

3 Press [RETURN] to exit the menu.

MARKER SEARCH

REPEAT TITLE / CHAPTER

You can set markers to memorize your favorite

places on a disc.

1 During playback, press

OFF (REPEAT)

[MODE] repeatedly until

REPEAT menu appears.

1 During playback, press [MODE] repeatedly until

SEARCH menu appears.

2 Use [K / L] to select your desired repeat mode.

2 Use [K / L] repeatedly to

OFF:

Repeat function off

10 AC

__ __:__:__

display MARKER SEARCH

menu.

CHAPTER: Current chapter repeat

TITLE:

<Example: Audio CD>

Current title repeat

3 Use [s / B] to select a marker number among

NOTES:

• Repeat Title/Chapter is not available in some scenes.

1 to 10.

• The REPEAT setting will be cleared when moving to

another title or chapter.

4 When the track (or title) reaches your desired

point, press [ENTER] to set a marker.

3 Press [RETURN] to exit the menu.

• The track (or title) number and

10 AC

00:15:30

elapsed playing time will appear

on the TV screen.

REPEAT A-B

OFF (A-B REPEAT)

A- (A-B REPEAT)

A-B (A-B REPEAT)

1 Press [MODE] repeatedly until

5 You can play from the desired point by selecting

the marker number by using [s / B] and then

pressing [ENTER].

A-B REPEAT menu appears.

2 Press [ENTER] at your desired

starting point (A).

6 To clear a marker, select the marker number and

press [CLEAR]. To clear all markers at once,

select "AC" with [s / B] and press [ENTER].

To cancel it, press [CLEAR].

3 Press [ENTER] again at your

desired ending point (B).

NOTE:

The repeat sequence begins.

• The following operations will also erase all markers:

– Opening the disc tray

– Turning off the power

– Pressing [SELECT]

4 To exit the sequence, follow step 1 and press

[ENTER] repeatedly until "OFF" appears and

press [RETURN] to exit the menu.

7 Press [RETURN] to exit the menu.

NOTES:

• The A-B repeat section can be set only within the cur-

rent title (for DVDs) or current track (for Audio CDs).

• A-B repeat is not available with some scenes in DVD.

• A-B repeat playback is not available during other

repeat playback.

DVD SECTION

N-SCREEN INFORMATION

SPECIAL PLAYBACK FUNCTIONS & SETTINGS

You can check the information about the

current disc by pressing [DISPLAY].

PROGRAMMED PLAYBACK

You can determine the playing order of tracks.

For DVD-Videos

In the stop mode, press [MODE].

PROGRAM

CD-DA

1 Press [DISPLAY] during playback to show cur-

TOTAL 0:00:00

• The PROGRAM screen appears.

rent chapter.

Angle icon, appears only when avail-

able on the DVD

3:40

4:30

5:00

3:10

5:10

1:30

2:30

ENTER

1/4

1/1

PLAY

Current playback status

3:40

CLEAR

11/16 0:00:00 - 0:03:30

Remaining time of the current chapter

Elapsed time of the current chapter

] to select a track,

2 Use [

PROGRAM

CD-DA

TOTAL 0:14:25

then press [ENTER].

22 1:30

ALL CLEAR

3:40

5:00

CH(Chapter):

Current chapter number / Total chapters

10 1:30

12 2:45

22 1:30

NOTES:

• Up to 99 tracks can be entered.

ENTER

4/4

1/1

PLAY

22 1:30

CLEAR

2 Press [DISPLAY] again to show the current Title.

• Press [CLEAR] to erase the

most recently entered track.

1/3 0:00:00 - 1:23:45

Remaining time of the current title

• If you enter more than 8 tracks, you can change the

pages of the program list with [PREV H ]

[NEXT G].

• To erase all tracks in the program at once, select "ALL

CLEAR" at the bottom of the track list.

Elapsed time of the current title

TT(Titlea):

Current title number / Total titles

3 Press [DISPLAY] again.

3 Repeat step 2 until you select all the tracks you

want to play in the program.

Layer numbers, appears only when

playing a two-layered Disc

L0: Layer 0 is playing

4 Press [PLAY B] to play the programmed tracks.

L1: Layer 1 is playing

5 Press [STOP C] to temporarily stop the playback.

You can resume the playback by pressing

[PLAY B].

Current repeat setting appears only

when the repeat setting is active

C: Chapter repeat / T: Title repeat /

B: A-B repeat

Press [STOP C] twice to cancel the programmed

playback.

BIT RATE: The amount of audio and

video data currently being read

NOTE:

4 Press [DISPLAY] again to exit.

• REPEAT setting is available during programmed

playback. (Refer to "REPEAT TRACK" on page 19.)

For Audio CDs

1 Press [DISPLAY] during playback to show the

RANDOM PLAYBACK

current Track.

Current playback status

This function shuffles the playing order of

tracks.

4/12 0:03:21 - 0:02:15

Remaining time of the current track

Elapsed time of the current track

1 In the stop mode, press

TR(Track):

Current track number / Total tracks

RANDOM

CD-DA

TOTAL 0:45:55

[MODE] twice.

RANDOM PROGRAM

no indication

• The RANDOM screen appears.

2 Press [DISPLAY] again to show the current Total

PLAY

Track.

ALL:

Current track number / Total tracks

4/12 0:13:45 - 0:45:40

2 Press [PLAY B] to start random playback.

Current repeat setting appears only

when the repeat setting is active

T: Track repeat

NOTE:

A: All Tracks repeat

• REPEAT setting is available during random playback.

(Refer to "REPEAT TRACK" on page 19.)

B: A-B repeat

Remaining time of the entire disc

Elapsed time of the entire disc

3 Press [STOP C] to stop random playback.

PROGRAM

When in the PROGRAM mode

3 Press [DISPLAY] again to exit.

HANGING THE DVD SET UP ITEMS

You can change the DVD player’s settings by pressing [SET-UP] in DVD mode.

The set up items are shown in the diagram below.

Press [SET-UP] twice

QUICK

CUSTOM

INITIALIZE

AUDIO

SUBTITLE

LANGUAGE (P.21)

DISC MENU

TV MODE

STILL MODE

TV MODE

DISPLAY (P.22)

AUDIO (P.22)

DRC

DOWN SAMPLING

DOLBY DIGITAL

PARENTAL LEVEL

PASSWORD CHANGE

PARENTAL (P.22)

OTHERS (P.23)

ANGLE ICON

AUTO POWER OFF

CUSTOM MENU

1 In the stop mode, press

[SET-UP] twice to display the

DVD SETUP menu.

SETUP

LANGUAGE SETTING

QUICK

CUSTOM

INITIALIZE

SETUP

LANGUAGE

4 Use [K / L] to select the

desired item, then press

[ENTER].

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

NOTES:

• Pressing [SET-UP] once will

show TV SETUP menu partly.

SET:ENTER

SELECT:

EXIT:SETUP CANCEL:RETURN

AUDIO

SUBTITLE

: Sets the audio language.

: Sets the subtitle language.

• If the menu does not appear, press [STOP C] first.

DISC MENU : Sets the language for DVD menu.

• Make sure the unit is in DVD mode before setting.

] to select "CUSTOM", then press

2 Use [

5 Use [K / L] to select your desired language

[ENTER].

from the list, then press [ENTER].

SETUP

CUSTOM

3 Use [K / L] to select the

desired item, then press

[ENTER].

6 Press [SET-UP] to exit the menu.

LANGUAGE

DISPLAY

AUDIO

PARENTAL

OTHERS

NOTES:

• If your desired language is not

SETUP

LANGUAGE

Refer to the pages below for

continuation to set up each item.

LANGUAGE CODE

on the list, select "OTHER" and

enter the code of the language.

(Refer to "LANGUAGE CODE

LIST" on page 27.)

Please enter a 4-digit language code.

LANGUAGE setting : P.21

DISPLAY setting

AUDIO setting

PARENTAL setting : P.22

OTHERS setting : P.23

: P.22

• This feature may not be valid due to default setting

of the disc. In this case, press [MODE] to select the

language. (Refer to "AUDIO MENU" on page 17.)

• If you select a language that is not supported by the

disc, subtitle will be "OFF" automatically and the

default language of the disc will be selected.

• To change the language for the on-screen menus,

call up the TV SETUP menu by pressing

[SET-UP] once and set the language. (Refer to "ON-

SCREEN MENU LANGUAGE" on page 11.)

DVD SECTION

CHANGING THE DVD SET UP ITEMS

DISPLAY SETTING

AUDIO SETTING

4 Use [K / L] to select an item,

SETUP

DISPLAY

Choose the appropriate Audio settings for your

equipment as it only affects the playback of DVD

discs.

then press [ENTER].

TV MODE

STILL MODE

4:3 LETTER BOX

AUTO

QUICK

• TV MODE:

] to select an item,

4 Use [

SETUP

AUDIO

You can change certain aspects of the DVD display

screens and on-screen messages on the TV screen.

then press [ENTER] repeated-

ly until your desired setting

appears.

DRC

DOWN SAMPLING

DOLBY DIGITAL

BITSTREAM

4:3 LETTER BOX (default):

To show black bars on top and

bottom of the screen.

4:3 PAN & SCAN:

To show a full height picture with both sides

trimmed.

SETUP

DISPLAY

TV MODE

4:3 LETTER BOX

4:3 PAN & SCAN

• DRC (Dynamic Range Control):

ON : To compress the range of soft to loud sound.

(default)

OFF : Output the original sound.

NOTE:

• DOWN SAMPLING:

• You can access this setting directly by selecting

"QUICK" at step 2 on page 21.

ON : Output in 48kHz. (default)

OFF : Output the original sound.

• STILL MODE:

This function allows you to adjust picture resolution

and quality in the still mode.

NOTE:

• When playing a disc with copyright protection, the

sound will be output at 48kHz even if the setting is

"OFF".

SETUP

DISPLAY

STILL MODE

AUTO

FIELD

FRAME

AUTO (default):

Automatically selects the best

QUICK

• DOLBY DIGITAL:

resolution setting (FRAME or FIELD) based on

the data characteristics of the pictures.

FIELD:

Select "FIELD" when the picture is still unstable

even if "AUTO" is selected. FIELD stabilizes the

picture, although the picture quality may become

coarse due to the limited amount of data.

FRAME:

Select "FRAME" to display relatively motionless

pictures in higher resolution. FRAME improves

the picture quality, although it may unstabilize the

pictures due to simultaneous output of two field

data.

BITSTREAM : Output a Dolby Digital signal.

(default)

PCM

: Convert the Dolby Digital to PCM.

(2 channel stereo)

NOTES:

• You can access this setting directly by selecting

"QUICK" at step 2 on page 21.

• Set to "BITSTREAM" when the unit is connected to

a Dolby Digital Decoder.

5 Press [SET-UP] to exit the menu.

PARENTAL SETTING

This feature allows you to set the rating level of your

DVD discs. Playback will stop if the disc ratings

exceed the level you set.

PARENTAL LEVEL

4 Enter four-digit password with

SETUP

PARENTAL

PASSWORD

the Number buttons, then

Please enter a 4-digit password.

press [ENTER].

NOTE:

• Enter any 4 digits (except for 4737) to set the pass-

word for the first time, and record it for your memory.

5 Use [K / L] to select

SETUP

PARENTAL

"PARENTAL LEVEL", then

PARENTAL LEVEL

PASSWORD CHANGE

ALL

press [ENTER].

OTHER SETTING

SETUP

PARENTAL

6 Use [K / L] to select the

desired level, then press

[ENTER].

PARENTAL LEVEL

] to select an item,

4 Use [

SETUP

OTHERS

ALL

8 [ADULT]

7 [NC-17]

6 [R]

ANGLE ICON

AUTO POWER OFF

then press [ENTER] repeated-

ly to set the feature "ON" or

"OFF".

7 Press [SET-UP] to exit the menu.

• ANGLE ICON:

• CONTROL LEVELS

ON : To show the angle icon when multiple cam-

era angles are available during DVD play-

back. (default)

ALL: All parental locks are cancelled.

8 [ADULT]: DVD software of any grade (adult/gen-

eral/children) can be played back.

OFF : To keep the angle icon from the display.

7 to 2: Only DVD software intended for general

use and children can be played back.

• AUTO POWER OFF:

ON : To activate the screen saver program and

turn off the unit automatically. (default)

OFF : To deactivate Auto Power Off function.

1 [KID SAFE]: Only DVD software intended for

children can be played back, with those intended

for adult and general use prohibited.

NOTE:

• The screen saver program starts when there is no

input from the unit for 5 minutes in the stop mode.

After the screen saver program has been active for

15 minutes, the power is automatically turned off.

NOTE:

• With some DVDs, it may be difficult to find if they are

compatible with parental lock. Be sure to check if the

parental lock function operates in the way that you

have set.

5 Press [SET-UP] to exit the menu.

PASSWORD CHANGE

SETUP

PARENTAL

INITIALIZE

This allows you to return all items of

SETUP menu (except for PARENTAL

4 Enter the current password

with the Number buttons,

then press [ENTER].

PASSWORD

Enter current password.

setting and menu language) to their default settings.

SETUP

PARENTAL

5 Use [K / L] to select

"PASSWORD CHANGE", then

press [ENTER].

PARENTAL LEVEL

PASSWORD CHANGE

ALL

1 In the stop mode, press [SET-UP] twice to

display the DVD SETUP menu.

SETUP

PASSWORD

Please enter a 4-digit password.

PARENTAL

6 Enter four-digit password with

the Number buttons, then

press [ENTER].

SETUP

2 Use [K / L] to select

QUICK

"INITIALIZE", then press

CUSTOM

Don't forget the password.

Press 'ENTER' to activate password.

INITIALIZE

[ENTER].

7 Press [SET-UP] to exit the menu.

3 Use [K / L] to select "YES",

SETUP

INITIALIZE

then press [ENTER] twice.

• To cancel the initialization,

select "NO".

Initialize?

YES

NOTE:

• If you forget the current password, enter 4737 first,

then enter your new password.

The former password will be cleared and parental

level will be set to "ALL" (default).

4 Press [SET-UP] to exit the menu.

ROUBLESHOOTING GUIDE

If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the following

guide for the possible remedy of a problem before contacting Customer Service. Sometimes a performance

problem can be easily solved by checking seemingly apparent but often overlooked possibilities. It could save

your time and money.

SYMPTOM

No power

POSSIBLE REMEDY

Make sure the power plug is connected to an AC outlet.

(In case of power failure) Check the breaker.

PAGE

•

No operation by remote control

Check if the batteries are weak or inserted incorrectly.

Replace weak batteries and insert with their polarities

(+/- signs) as indicated.

•

Aim the remote control at the remote sensor and operate

within 23 feet (7 m) of the unit.The operable range from the

unit is 10 feet (3 m) within 15˚.

•

Remove all obstacles to clear the path of the infrared signal.

Refer to "IR SIGNAL CHECK".

Select the correct mode to operate by pressing [SELECT].

•

Check if antenna or cable is connected properly.

Check for the broken pin or wire of antenna cable.

Check for source of reception disturbance.

•

Poor or no picture

Press [SELECT] to select the correct mode.

Perform channel scanning to memorize available TV channels.

Try another channel. If OK, then possible station problem.

Adjust picture control (COLOR/CONTRAST/BRIGHT etc.).

Check for magnetism from nearby appliances and try

degaussing.

Adjust volume control using [

•

Poor or no sound

VOL.

Try another channel. If OK, then possible station problem.

Error committed by the closed captioning production company.

Possible in a live broadcast. Not in case of a prerecorded pro-

gram.

•

Misspelling in captions

A few seconds of delay is common for live broadcast.

If a dialogue exceeds the display capacity (220 words per

minute), selective editing is used so that the captions remain

up-to-date with the current TV screen dialogue.

•

Text is not shown in its entirety

or a delay occurs from what is

being said

Caused by interferences of building, power lines, thunder-

storms, etc.

•

Captions scrambled with white

boxes

The broadcasters may use a time compression process to

speed up the program. The decoder cannot read the

compressed information and captions will be lost.

No captions in a program which

must contain closed caption

Possibility of an illegal copy or an erroneous copying process

accidentally performed by the fabricator.

•

No captions in a pre-recorded

videotape with indicated closed

captions included

You are in TEXT mode. Select CAPTION mode or "OFF".

Black box in the TV screen

SYMPTOM

No picture

POSSIBLE REMEDY

This unit cannot play DVD-RAM/CD-i/Photo CD/Video

CD/DVD with region codes other than "1" and "ALL".

PAGE

•

Disc cannot be played

No sound

Clean the disc.

Place the disc correctly, with the label side up.

Cancel the parental setting or change the control level.

•

Correct the audio output settings.

Confirm the power and audio settings of external audio com-

ponent.

•

No DTS audio is output

Distorted picture

This unit does not support DTS audio. This is not a malfunc-

tion.

•

During the playback of a 2-layered disc, pictures may stop for --

a moment. This happens while the 1st layer is being switched

to the 2nd layer. This is not a malfunction.

This happens right after fast forwarding or rewinding.

•

Audio or subtitle language does The selected language is not available for audio or subtitle on

•

not match the setting

the DVD.

The camera angle cannot be

changed

The DVD does not contain sequences recorded from different

camera angles.

•

Audio or subtitle language can-

not be changed

The DVD does not contain audio source or subtitles in the

selected language.

"Prohibited icon" appears on the The operation is not available by the unit or the disc.

•

screen

CD/DVD sound dropout

No CD/DVD reproduction

DVD picture poor

Scratched disc. Replace with an unscratched one.

•

NOTES:

• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s

Manual for details on correct operations.

• During programmed playback, you cannot play back from a desired track or use the random playback function.

AINTENANCE

DEGAUSSING

IR SIGNAL CHECK

A degaussing circuit in this unit clears up color

errors on the TV screen. Color errors occur when

there is any excess magnetism close to the unit.

This circuit is designed to operate once when the

unit is first plugged in. If you see minor color

errors on the screen, unplug the unit for approx-

imately 30 minutes. When you plug in the unit

again, the degaussing circuit will operate to clear

errors. Take this step any time the TV screen is

accidentally magnetized or when you move the unit.

Use the AM radio or the digital camera to check if

the remote control properly sends out the infrared

signal. It will help to define the cause of malfunction.

Using AM radio

• Tune the AM radio to a station with no

broadcasting. Press any button on the

remote control towards the radio. If the radio

receives the signal from remote control

properly, the sound will flutter.

Using digital camera

(including built-in camera of cellular

phone)

• Press and hold any button on the remote

control towards a digital camera. The remote

control is working if you confirm infrared light

through the digital camera.

IF THE LASER OPTICAL PICKUP UNIT IS

DIRTY

• If the unit still does not perform properly after

referring to the relevant sections and the

"TROUBLESHOOTING GUIDE" of the Owner’s

Manual, the laser optical pickup unit may be dirty.

Consult your dealer or an Authorized Service

Center for inspection and cleaning of the laser

optical pickup unit.

DISC HANDLING

• Handle the discs so that fingerprints and dust do

not adhere to the surfaces of the discs.

CABINET CLEANING

• Always store the disc in its protective case when it

is not used.

• Wipe the control panel and other exterior surfaces

of the unit with a soft cloth immersed in lukewarm

water and wrung dry.

• To clean-off, use a soft cloth.

• Do not use a hard cloth since this

will mar the disc.

• Never use a solvent or alcohol. Do not spray

insecticide liquid near the unit. Such chemicals

may cause damage and discoloration to the

exposed surfaces.

• Wipe the disc in a straight line from center to edge.

• Never wipe with a circular motion.

• Do not use detergent or abrasive clean-

ing agents.

SERVICING

• Should your unit become inoperative, do not try to

correct the problem by yourself. There are no

user-serviceable parts inside. Turn off, unplug the

power cord and please call our help line men-

tioned on the front page, to locate an Authorized

Service Center.

PPENDIX

CABLE CHANNEL DESIGNATIONS

If you subscribe to cable TV, the channels are displayed as 1-125. Cable companies often designate channels

with letters or letter-number combinations. Please check with your local cable company. The following is a

chart of common cable channel designations.

CATV channel

TV Display

CATV channel

TV Display

CATV channel

TV Display

W+1

W+2

W+3

W+4

W+5

W+6

W+7

W+8

W+9

CATV channel

TV Display

W+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24

46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

W+25 W+26 W+27 W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 W+36 W+37 W+38 W+39

61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

W+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48 W+49 W+50 W+51 W+52 W+53 W+54

CATV channel

TV Display

CATV channel

TV Display

W+55 W+56 W+57 W+58

91 92 93 94

W+59 W+60 W+61 W+62 W+63 W+64

100 101 102 103 104 105

A-5

A-4

A-3

A-2

A-1

CATV channel

TV Display

CATV channel W+65 W+66 W+67 W+68 W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+79

TV Display

106

W+80 W+81 W+82 W+83 W+84

121 122 123 124 125

107

108

109

110

111

112

113

114

115

116

117

118

119

120

CATV channel

TV Display

LANGUAGE CODE LIST

Language

Code Language

German [GER]

Code

Language

Code Language

Code

A-B

5051

5158

5758

5360

5367

5447

5569

5455

5467

Mongolian

Nauru

Nepali

5960

6047

6051

Somali

6561

5165

6567

6569

6568

Abkhazian

Afar

Afrikaans

Albanian

Amharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Basque

Bengali;Bangla

Bhutani

Bihari

Bislama

Breton

Bulgarian

Burmese

Byelorussian

C-E

Cambodian

Catalan

Chinese [CHI]

Corsican

Croatian

Czech [CZE]

Danish [DAN]

Dutch [DUT]

English [ENG]

Esperanto

Estonian

F-H

4748

4747

4752

6563

4759

4764

5471

4765

4771

4772

4847

5167

4860

5072

4854

4855

4864

4853

5971

4851

Greek [GRE]

Greenlandic

Guarani

Gujarati

Hausa

Spanish [SPA]

Sundanese

Swahili

Norwegian [NOR] 6061

O-R

Swedish [SWE]

Tagalog

Tajik

Tamil

Tatar

Telugu

Thai

Occitan

Oriya

Oromo(Afan)

Panjabi

Pashto;Pushto

Persian

Polish [POL]

6149

6164

6159

6247

6265

5247

6258

Hebrew

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

Hindi

Hungarian [HUN]

I-K

Icelandic [ICE]

Indonesian

Interlingua

Interlingue

Inupiak

5565

5560

5547

5551

5557

5347

5566

5647

5669

5760

5765

5757

6469

5771

6460

5761

5767

Portuguese [POR] 6266

Tibetan

Tigrinya

Tonga

Tsonga

Turkish [TUR]

Turkmen

Twi

Quechua

6367

Rhaeto-Romance 6459

Irish [IRI]

Romanian [RUM]

Russian [RUS]

Samoan

Sangho

Sanskrit

Scots Gaelic

Serbian

Serbo-Croatian

Sesotho

Setswana

Shona

Sindhi

6461

6467

Italian [ITA]

Japanese [JPN]

Javanese

Kannada

6559

6553

6547

5350

6564

6554

6566

6660

6560

6550

6555

6565

6557

6558

U-Z

Kashmiri

Kazakh

Ukrainian

Urdu

6757

6764

6772

6855

6861

4971

6961

7054

5655

7161

7267

5759

4947

7254

4961

5464

4965

5047

6058

5160

5161

5166

Kinyarwanda

Kirghiz

Kirundi

Korean [KOR]

Kurdish

L-N

Laothian

Latin

Latvian;Lettish

Lingala

Lithuanian

Macedonian

Malagasy

Malay

Malayalam

Maltese

Maori

Uzbek

Vietnamese

Volapuk

Welsh

Wolof

Xhosa

Yiddish

Yoruba

Zulu

5861

5847

5868

5860

5866

5957

5953

5965

5958

5966

5955

5964

5961

Singhalese

Siswat

Slovak

Slovenian

Faroese

Fiji

Finnish [FIN]

French [FRE]

Frisian

Galician

Georgian

5261

5256

5255

5264

5271

5358

5747

If you choose a language that has a 3-letter language

code, the code will be displayed every time you change

the AUDIO or SUBTITLE language setting. If you

choose any other languages, '---' will be displayed

instead. (A 3-letter language code is written in bracket.)

Marathi

Moldavian

PECIFICATIONS

GENERAL SPECIFICATIONS

OTHER SPECIFICATIONS

Terminals

CRT:

Antenna input:

VHF/UHF/CATV

20 inch in-line gun,

75 ohm unbalanced

(F-type)

RCA connector × 1

RCA connector × 2

1/8" stereo (3.5 mm)

90˚ deflection tube

NTSC-M

§15.119/FCC

Television system:

Closed caption system:

Tuner channel

Video input:

Audio L/R input:

Headphone:

Coaxial digital

audio output:

VHF Low:

VHF High:

UHF:

CATV

VHF:

MID band:

SUPER band:

HYPER band:

#2~#6

#7~#13

#14~#69

One pin jack,

500 m Vpp (75 ohm)

Digital encoded

infrared light system

5°C to 40°C

(41°F~104°F)

AC 120 V, 60 Hz

80 W

Remote control:

Operating temperature:

Power requirements:

Power consumption

(Maximum):

A5~A1, A~I

J~W

W+1~W+84

DVD

Product type:

Discs:

Picture tube:

Dimensions:

20"

DVD Player

DVD video, Audio CD

NTSC color

H: 18" (457mm)

W: 20-3/16" (512mm)

D: 19-7/8" (505mm)

Output signal format:

Weight:

45.1 lbs. (20.5kg)

ELECTRICAL SPECIFICATIONS

Sound output:

2 speakers, 1W, 8 ohm

• Designs and specifications are subject to change without notice.

• If there is a discrepancy between languages, the default language will be English.

NDICE DE CONTENIDO

PREPARATIVOS PARA EL USO . . . . . . . . . . . .29

CONEXIONES DE ANTENA/CABLE . . . . . . . . . . .29

CONEXIÓN A UN DISPOSITIVO EXTERNO

SECCIÓN DVD

REPRODUCCIÓN DE UN DISCO . . . . . . . . . . .33

REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . .33

MENÚ DE DISCO/MENÚ DE TÍTULO . . . . . . . . . .33

(FRONTAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

CONEXIÓN A UN DISPOSITIVO DE AUDIO DIGITAL

(TRASERA) . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

SECCIÓN TV

FUNCIONAMIENTO Y AJUSTES DEL

TELEVISOR . . . . . . . . . . . . . . . . . . . . . . . . . .31

INSTALACIÓN INICIAL . . . . . . . . . . . . . . . . . . . . .31

PARA VER UN PROGRAMA DE TELEVISIÓN . . . .31

AJUSTE DE CANAL . . . . . . . . . . . . . . . . . . . . . . .32

IDIOMA DE MENÚ DE PANTALLA . . . . . . . . . . . . .32

REPARATIVOS PARA EL USO

CONEXIONES DE ANTENA/CABLE

Enchufe el cable entrante en la toma ANT., en la parte trasera de la unidad.

Si su servicio de cable le suministra una caja convertidora o si usted utiliza un sistema de satélite, conecte

la caja con esta unidad, como se indica a continuación.

Cable

Señal de TV

Antena

ANT.

COAXIAL

Cable entrante desde antena

casera/empresa de cable (sin

caja de cable)

Parte trasera de la

unidad

ANT.

Caja de cable o caja de satélite*

*NOTA

OUT

(NO DESCONECTAR DE LA CAJA)

Algunos sistemas de TV por cable utilizan

señales cifradas y requieren un convertidor

especial para recibir estos canales.

Cable entrante desde empresa de cable

o antena de satélite

Consulte con su empresa de cable local.

NOTA:

Para su seguridad y

Patilla doblada

Antes de enchufar la antena en la

toma ANT. de la unidad, compruebe

que la patilla no está doblada. Si

está doblada, enderece la patilla

como se indica en la ilustración y

enchufe la patilla a la toma ANT. de

la unidad.

para evitar daños en la

unidad, desenchufe el

cable de la antena de la

toma ANT. antes de

mover la unidad.

Enchufe

Cable

(Debe ser

enderezada)

(Patilla recta)

PREPARATIVOS PARA EL USO

CONEXIÓN A UN DISPOSITIVO EXTERNO (FRONTAL)

Cuando vea un programa grabado en otra fuente (videograbadora o videocámara), utilice

las tomas de entrada AUDIO/VIDEO en la parte frontal de la unidad.

Conecte las tomas de salida de Audio/Vídeo de otra fuente a las tomas de entrada de

AUDIO L/R y VIDEO de esta unidad.

AUX

A continuación, utilice [SELECT] o [CH.

] hasta que aparezca "AUX" en la pantalla.

Por ejemplo,

videograbadora o

videocámara, etc.

Parte frontal de la unidad

A las tomas de salida de audio

(ENTRADA)

ej.

Auricular

Cable de audio

(disponible en el mercado)

(SALIDA)

(ENTRADA)

A la toma de salida de vídeo

Cable de vídeo (disponible en el mercado)

• Para conectar auriculares

(no suministrados) y

(SALIDA)

escuchar en privado.

NOTA:

Cuando conecte una VIDEOGRABADORA monoaural (otra fuente) a esta unidad, conecte la toma de salida de audio de

la videograbadora monoaural (otra fuente) a la toma AUDIO L de esta unidad. El sonido saldrá igualmente por ambos

canales L y R (izquierdo y derecho).

CONEXIÓN A UN DISPOSITIVO DE AUDIO DIGITAL (TRASERA)

Puede conectar esta unidad a un dispositivo de audio digital para disfrutar del sonido digital de DVD.

Conecte a un amplificador equipado con tomas de entrada digital, tales como una platina MD o DAT. Para

reproducir un disco DVD en un formato ambiental multicanal Dolby Digital en esta unidad, conéctela a un

decodificador Dolby Digital.

Utilice un cable coaxial digital de audio (disponible en el mercado) para las conexiones de audio.

ANT.

COAXIAL

A la toma COAXIAL

(Solamente DVD AUDIO OUT)

(SALIDA)

Decodificador

Dolby Digital

A la toma de entrada

de audio coaxial digital

(ENTRADA)

Cable de audio coaxial digital

(disponible en el mercado)

Platina MD,

platina DAT, etc.

A la toma de entrada

de audio coaxial digital

(ENTRADA)

NOTAS:

• La fuente de audio de un disco en formato ambiental multicanal Dolby Digital no puede ser grabado como sonido

digital por una platina MD o DAT.

• Asegúrese de apagar todos los dispositivos del sistema antes de conectar otro dispositivo.

• Consulte los manuales del usuario de los dispositivos que van a conectarse a la unidad.

• Para conectar a una platina MD o DAT, ajuste "DOLBY DIGITAL" en "PCM" para la salida de audio en el modo de

ajuste, y para conectar a un decodificador Dolby Digital, ajuste en "BITSTREAM". Utilizar una unidad con unos ajustes

incorrectos puede generar distorsión de ruido y puede asimismo dañar los altavoces.

SECCIÓN TV

UNCIONAMIENTO Y AJUSTES DEL TELEVISOR

PARA VER UN PROGRAMA DE TELEVISIÓN

INSTALACIÓN INICIAL

Cuando se enciende la unidad por primera

vez, se muestra la pantalla de IDIOMA

1 Presione [STANDBY-ON y] para

encender la unidad.

INICIAL. Seleccione el idioma de visualización de

pantalla y ejecute la autoprogramación del canal.

NOTES:

SUGERENCIAS ÚTILES

1.VERIFIQUE ANTENA/CABLE/

SATÉLITE ESTÁ BIEN

CONECTADO.

2.VERIFIQUE

“AUTOPROGRAMACIÓN DE CA.”

ESTÁ BIEN AJUSTADO.

3.LEA LA PÁGINA FRONTAL

DEL MANUAL DEL USUARIO

NO.TEL.DE AYUDA

CLIENTES.

•Si la pantalla del televisor

muestre interferencias “de nieve”

y no funcione bien durante más

de 10 segundos, aparecerá

“SUGERENCIAS ÚTILES”.

1 Después de finalizar la conexión de la

antena o del cable, conecte el cable de

alimentación a una toma estándar de CA.

PANEL TRASERO PARA EL

LOS

•Compruebe si la antena o el cable están conectados

correctamente. (Consulte “CONEXIONES DE

ANTENA/CABLE” en página 29).

• Ajuste “AUTOPROGRAMACIÓN DE CA.” en el menú

de AJUSTE DE CANAL. (Consulte “AJUSTE DE

CANAL” en página 32).

• Si pese a todo esos ajustes no funcionan

correctamente, llame a nuestro teléfono de asistencia

(en la página frontal en este manual del usuario).

2 Presione [STANDBY-ON y] para encender la

unidad.

3 Presione cualquier tecla para

SELECT LANGUAGE

seleccionar el idioma del menú

ENGLISH

de pantalla.

NEXT:PRESS VOL

ESPAÑOL

DESPUÉS:PRESIONE VOL

FRANÇAIS

• ENGLISH :[VOL.

• ESPAÑOL :[VOL.

• FRANÇAIS :[CH.

]

APRÈS:PRESSEZ CH.

] o los botones numéricos

2 Utilice [CH.

para seleccionar el número de canal deseado.

]

Para utilizar los botones numéricos

4 Confirme la conexión de la

antena (o del cable) y presione

[PLAY B].

•Canales de un dígito: (Ej.: 02, 03, 04, etc.)

Presione primero [0] para seleccionar un canal de un

dígito.

•Canales de dos dígitos: (Ej.: 12, 38, 95 ...)

Presione dos dígitos directamente.

•Canales de tres dígitos: (Ej. 115, 125 ...)

Presione primero [+100], y luego presione los últimos

dos dígitos.

– INSTALACIÓN INICIAL –

CONECTE LA ANTENA O

CABLE O SATÉLITE EN

ESTA UNIDAD.

PRESIONE PLAY,

PARA REALIZAR EL

“AUTOPROGRAMACIÓN

DE CA.”.

• El sintonizador explora y

memoriza todos los canales

activos de su zona.

5 Cuando la exploración ha

finalizado, el sintonizador se

detiene en el canal

CA 15

3 Utilice [VOL. X / Y] para ajustar el volumen.

(Ejemplo)

memorizado más bajo.

Presione [MUTE] para

silenciar al instante el sonido.

VOLUMEN 20

NOTAS:

Presione de nuevo para

restaurar el nivel de sonido anterior.

• Puede salir del menú INSTALACIÓN INICIAL

presionando [SET-UP]. Si el botón se presiona durante

la exploración de canales, el sintonizador interrumpe la

exploración y se muestra el canal memorizado más bajo.

NOTA:

• Incluso aunque apague la unidad en el modo DVD,

la unidad estará en el modo TV cuando vuelva a

encenderse.

• El menú INSTALACIÓN INICIAL se muestra cada

vez que usted enciende la unidad a menos que la

exploración se haya finalizado.

PARA VER UN CANAL DE CABLE O SATÉLITE

• En caso de que no pueda

recibirse ningún canal mediante la

exploración de canales, “NO HAY

SEÑAL DE TV” aparece en

pantalla. Apague la unidad y

Si la unidad está conectada a una caja de cable o de

satélite, utilice [CH. K / L] para seleccionar CA3 o

CA4 según el ajuste de canal de salida del dispositivo

y seleccionar el canal deseado en dicho dispositivo.

NO HAY SEÑAL DE TV

compruebe la conexión de la

antena; a continuación, siga los pasos 1 a 5 otra vez.

PARA VER UNA ENTRADA EXTERNA

• Puede cambiar el después de finalizar la INSTALACIÓN

INICIAL mediante el menú IDIOMA o el menú AJUSTE DE

CANAL. (Consulte “IDIOMA DE MENÚ DE PANTALLA” o

“AJUSTE DE CANAL” en página 32).

Cuando un equipo externo esté

AUX

conectado a las tomas de entrada

frontales AUDIO/VIDEO, presione

[SELECT] o [CH. K / L]

repetidamente hasta que aparezca

"AUX" en la pantalla.

SECCIÓN TV

FUNCIONAMIENTO Y AJUSTES DEL TELEVISOR

AJUSTE DE CANAL

IDIOMA DE MENÚ DE PANTALLA

Es necesario preseleccionar el canal al

principio o en caso de haber movido el

televisor a una zona distinta.

Puede seleccionar el idioma del menú

de pantalla entre inglés, español y

francés.

- TV PREP. -

1 Presione [SET-UP].

AUTOPROGRAMACIÓN DEL CANAL

AJUSTE DE CANAL

AJUSTE DE V-CHIP

IDIOMA [ESPAÑOL]

TÍTULO [OFF]

Utilice [K / L] para ir hasta

- TV PREP. -

1 Presione [SET-UP].

"IDIOMA".

AJUSTE DE CANAL

AJUSTE DE V-CHIP

IDIOMA [ESPAÑOL]

TÍTULO [OFF]

Utilice [K / L] para ir hasta

"AJUSTE DE CANAL", y

presione [ENTER].

2 Presione [ENTER] repetidamente para

seleccionar "ENGLISH", "ESPAÑOL" o

"FRANÇAIS".

2 Utilice [K / L] para ir hasta

"AUTOPROGRAMACIÓN DE

CA.", y presione [ENTER].

– AJUSTE DE CANAL –

AGREGAR / BORRAR (CATV)

AUTOPROGRAMACIÓN DE CA.

3 Presione [SET-UP] para salir del menú.

NOTAS:

El sintonizador explora y memoriza todos los

canales activos de su zona.

• Esta función afecta solamente al idioma del menú de

pantalla y no a la fuente de sonido.

• Si por alguna razón el menú ya está en inglés o en

francés, presione [SET-UP] y mediante [K / L] vaya

a "LANGUAGE [ENGLISH]" o "LANGAGE [FRANÇAIS]",

y presione [ENTER] repetidamente para seleccionar

el idioma deseado, y presione

CA 15

3 Cuando la exploración ha

finalizado, se muestra el canal

memorizado más bajo.

(Ejemplo)

Si en la pantalla del televisor

aparece "NO HAY SEÑAL DE

TV", compruebe la conexión

de la antena y vuelva a

intentar.

[SET-UP].

NO HAY SEÑAL DE TV

NOTAS:

• La unidad puede reconocer canales de CATV como

canales de TV si el estado de la recepción es

deficiente. En tal caso, compruebe la conexión de la

antena y vuelva a intentar "AUTOPROGRAMACIÓN

DE CA.".

• La autoprogramación del canal NO es necesaria

cuando está conectado a una caja de cable o de

satélite. Simplemente seleccione el canal para

entrada de caja de cable o de satélite (ej. CA3 o

CA4) en la unidad, y seleccione el canal deseado

en la caja de cable o de satélite.

SECCIÓN DVD

EPRODUCCIÓN DE UN DISCO

AVANCE RÁPIDO / RETROCESO RÁPIDO

REPRODUCCIÓN BÁSICA

• Durante la reproducción, mantenga

presionado [FWD D] para avance

rápido o [REW E] para retroceso rápido.

• Cada vez que mantenga

1 Presione [STANDBY-ON] para

encender la unidad.

2 Presione [OPEN/CLOSE A].

presionado el botón, la

3 Coloque el disco en la

bandeja, con la etiqueta hacia

arriba.

reproducción se acelera y el

nivel de velocidad aparece en la pantalla.

NOTAS:

•

En los discos DVD, la velocidad de avance/retroceso

rápido es diferente según el disco. La velocidad

4 Presione [PLAY B].

aproximada es 1 (×2), 2 (×8), 3 (×20), 4 (×50) y 5 (×100).

• La bandeja se cerrará automáticamente y se

empezará la reproducción. Cuando reproduzca un

DVD que incluya un menú de títulos, este menú

puede aparecer en pantalla.

• En discos de CD de audio la velocidad aproximada

es 1 (×2), 2 (×8) y 3 (×30).

•

Para volver a la reproducción normal, presione [PLAY

AVANCE LENTO / RETROCESO LENTO

NOTAS:

• Cerrar la bandeja del disco manualmente o

presionando [OPEN/CLOSE A] también inicia la

reproducción.

•

Durante la reproducción, presione [PAUSE

• Mantenga presionado [FWD D] para

avance lento o [REW E] para retroceso lento.

• Cada vez que mantenga

• Con discos DVD que utilicen títulos para señales de

programa de reproducción, la reproducción puede

comenzar desde el segundo título o puede omitir

dichos títulos.

presionado el botón, la

reproducción se ralentiza y el

nivel de velocidad aparece en la pantalla.

5 Para congelar la imagen, presione [PAUSE F]

NOTA:

durante la reproducción.

• La velocidad de avance/retroceso lento varía según

el disco. La velocidad aproximada es 1 (1/16), 2 (1/8)

y 3 (1/2).

NOTA:

• El sonido se silenciará en modo de pausa.

• Para volver a la reproducción normal, presione

[PLAY B].

6 Presione [STOP C] para

REANUDACIÓN ACTIVADA

interrumpir temporalmente la

Presione 'PLAY' para reproducir

desde aquí.

Para reproducir desde el inicio,

primero presione 'STOP' y luego

'PLAY'.

reproducción.

MENÚ DE DISCO/MENÚ DE TÍTULO

Un DVD puede contener menús para explorar

el disco y acceder a funciones especiales.

• Presione [PLAY B] para

reanudar la reproducción.

• Para cancelar la reanudación y parar el disco,

presione [STOP C] de nuevo.

1 Presione [DISC MENU] o [TITLE].

Aparecerá el menú principal/menú de título del DVD.

Puede activar el menú incluso durante la reproducción.

NOTAS:

•

• La información de reanudación se conserva aunque

se apague la unidad.

• Puede aparecer un "icono

prohibido" en la zona superior

derecha de la pantalla del

2 Utilice [K / L / s / B] para seleccionar un

elemento y presione [ENTER].

televisor durante la operación. Esto significa que la

operación no está disponible en el disco.

NOTAS:

• SI el disco tiene un menú de disco, aparecerán

distintas opciones de selección: idioma de sonido,

subtítulos, capítulos del título y otras.

• El contenido del menú y las correspondientes

operaciones de menú pueden variar según los

discos. Para más detalles, consulte el manual que

acompaña el disco.

REPRODUCCIÓN PASO A PASO

• Durante la reproducción, presione

[PAUSE F].

Puede avanzar la imagen fotograma a fotograma

presionando repetidamente [PAUSE F].

• Para volver a la reproducción normal, presione

[PLAY B].

MEMO

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workman-

ship as follows:

DURATION:

PARTS:

FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the

date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this

warranty.

LABOR:

FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date

of original retail purchase.

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail

purchase will be required together with the product to obtain service under this warranty.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing

or if service was attempted by an unauthorized service center. This limited warranty does not apply to any product

not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It

does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not

supplied by FUNAI CORP. or damage which results from accident, misuse, abuse, mishandling, misapplication,

alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this prod-

uct or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE

USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED AND OF ALL OTHER LIABILITIES ON THE PART OF

FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FIT-

NESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY A FUNAI AND ITS REPRESEN-

TATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PER-

FORMED BY AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE

UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS

THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE

UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI

CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR

NOTICE.

WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:

To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original

packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER.

FUNAI CORP. will not reimburse you for any service done by unauthorized service providers without prior writ-

ten approval.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries,

please contact us at :

FUNAI CORPORATION

Customer Service

Tel :1-800-605-8610

http://www.funai-corp.com

19900 Van Ness Avenue, Torrance, CA 90501

Printed in Malaysia

1EMN22003

T9206UG★★★★★

Intel 815 User Manual
Logitech Tablet Keyboard 920004569 User Manual
Mazda Crib Toy 4112A NZLCTHL3 User Manual
Miele KM 3464 User Manual
Motorola D511 User Manual
Philips 19PS 45S User Manual
Philips 21PT51A User Manual
Philips 27PT5437 User Manual
Philips 6120 User Manual
Philips MCD295 User Manual