External
Super Multi DVD Rewriter
GSA-5120D
This product is manufactured to comply with the radio interference requirements of
EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC.
CAUTION - VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO THE BEAM.
VARNING - OSYNLIG LASERSTRÄLNING NÄR DENNA DEL ÄR ÖPPNAD STRÄLEN ÄR
FARLIG.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
CLASE 1
CLASSE 1
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
PRODUCTO LÁSER
PRODOTTO LASER
WARNING: Only drives bearing the logo Compact Disc ReWritable Ultra Speed can write or
erase Ultra Speed CD-RW media.
Ultra Speed CD-RW Media may be recognized by the same Compact Disc ReWritable Ultra
Speed logo on the disc label or packaging material.
Attempting to write to Ultra Speed CD-RW media using CD-RW drives NOT bearing the logo
Compact Disc ReWritable Ultra Speed may result in data loss.
DVD+R Double Layer media may have compatibility problem with other drives.
ii
Contents
Introduction
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Important precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Location and function of controls . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Installation
Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Removing the USB converter cable . . . . . . . . . . . . . . . . . . . . . . . . .7
Operation
Loading and ejecting a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Playing a music CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Playing DVD video and MPEG2 movie video . . . . . . . . . . . . . . . . . .9
Appendix
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
®
®
■
■
Microsoft and Windows are trademarks registered in the United States and
other countries by the Microsoft Corporation.
The company names and product names written in this manual are trademarks
or registered trademarks of the respective companies.
1
Introduction
Thank you for purchasing the LG External Super Multi DVD Rewriter.
Features
•
Universal Serial Bus (USB) 2.0 and FireWire IEEE 1394 interface for high-speed
data transfer.
•
•
•
•
Buffer Under Run error protection technology
Emergency eject support
Bear media loading with power eject.
Combination of CD-R/RW, DVD-R/RW, DVD+R/RW, DVD+R DL (Double Layer)
and DVD-RAM drive functions into one drive.
•
•
Supports region playback control Phase II.
40X max Writing (CD-R), 24X max Writing (CD-RW), 12X max Writing (DVD+R),
8X max Writing (DVD-R), 5X max Writing (DVD-RAM), 4X max Writing
(DVD+RW, DVD-RW), 2.4X Writing (DVD+R Double layer), 40X max Reading
(CD-ROM, CD-R), 40X max Reading (CD-RW), 16X max Reading (DVD-ROM
single), 8X max Reading (DVD-ROM dual), 10X max Reading (DVD+R, DVD-R),
8X max Reading (DVD+RW, DVD-RW, DVD-VIDEO), 5X Reading (DVD-RAM).
Package contents
Item
Quantity
A. External Super Multi DVD Rewriter
1
1
1
1
1
1
1
1
B. USB 2.0 converter cable
C. FireWire IEEE 1394 cable (6 pin to 6 pin)
D. FireWire IEEE 1394 cable (6 pin to 4 pin)
E. AC Power Adapter (with Power supply cable)
F. Software CD
G. Quick Guide for Software CD
H. Manual
2
Cautions
System meeting the following requirements is needed in order to use USB 2.0
operation with this drive.
•
Computer that is equipped with a USB 2.0 – compliant USB connector or PCI
adapter card, and on which the USB 2.0 EHCI (Enhanced Host Controller
1)
Interface) driver software has been installed.
1)
The USB 2.0 EHCI driver software is supplied with currently available PCI adapter cards
that conform to USB 2.0. Further, Microsoft has released the USB 2.0 EHCI driver software
for Windows XP, therefore it is also possible to use this driver software with Windows XP.
If you want to know in detail, please contact your USB 2.0 adapter dealer or consult your PC
manufacturer, or consult the Microsoft Corporation Web site.
•
To achieve maximum Record & Write speed your system may require data to be
copied first to the computer’s hard drive rather than directly from another source
disc or drive.
System requirements
Computer
This unit can be operated in the system environment explained here.
Pentium 4 1.6GHz or Higher with IBM PC or Compatible.
128MB of RAM or greater.
System
requirements
CPU
Memory
Hard disk
10GB or more free space.
(The free space needed for writing depends on the quantity of data.)
Interface
USB port or IEEE1394 port
For Software installation
CD-ROM drive
Software Required OS Windows 2000 Professional/XP(Home Edition/ Professional),
Direct X 9.0 or Higher is required.
CD-R, CD-RW, DVD-R,
DVD-RW, DVD+R,
DVD+RW, DVD-RAM
discs
CD-R : LG, Mitsubishi Chemical, Verbatim, Taiyo Yuden, TDK or SKC
discs are recommended.
CD-RW : LG, Ricoh, Mitsubishi Chemical, Verbatim discs are
recommended.
DVD-R : Maxell, Taiyo Yuden, JVC are recommended.
DVD-RW : JVC, Mitsubishi Chemical, TDK are recommended.
DVD+R : Taiyo Yuden, JVC, Ricoh are recommended.
DVD+RW : TDK, FujiFilm are recommended.
DVD-RAM : Maxell, Panasonic are recommended.
DVD+R DL : Mitsubishi Chemical is recommended.
* Compatibility problem in write/read function may occur with some DVD+R Double Layer media
depending on the media manufacturing quality.
3
Important precautions
Follow these precautions when handling the drive or discs.
Precautions
Please note that the manufacturer of this equipment does not offer any warranty against
data loss due to inappropriate installation, handling, direct or indirect damages. Please
note that the manufacturer will bear no responsibility for direct or indirect damages
(including lost data)caused by the use of this product or its malfunction.
Please backup(copy) all important data as protection against data loss.
Installation
Avoid placing the drive in a location subject to:
- high humidity
- mechanical vibration
- high temperature
- direct sunlight
- excessive dust
Operation
Don’t move the drive suddenly from a cold place to warm one.
Condensation may cause abnormal operation.
Make sure to remove the disc before moving the drive to prevent the possible damage
to the disc.
Prevent foreign objects, such as liquids or metal, from entering the drive and in the case
a foreign object enters the drive, please consult the dealer where the drive was
purchased.
Don’t interrupt the electric power while the drive is operating.
While drive is operating, don’t move the drive or give a shock to the drive, since it can
cause damages to the disc.
AC Adapter
Don’t plug in or remove the AC adapter using wet hands.
Don’t damage the AC adapter by scratching, modifying, or bending its prongs.
Use only supplied AC adapter.
Don’t disassemble the AC adapter.
Operation through a USB hub cannot be guaranteed.
When connecting with USB1.1 interface, picture and sound may be disrupted while
watching DVD Video due to lack of data transfer speed. For smoother playback of DVDs,
high-speed USB 2.0 should be used.
4
Location and function of controls
This drive should be used only in its current hardware and software configuration.
1
2
3
4
5
6
7
8
1. Disc Tray
2. Drive activity indicators
The LED used to indicate the operation of External Super Multi DVD Rewriter.
Read:
The green color is displayed during disc reading session.
Write:
The green color is flashed during disc writing sessions. (CD-R/RW, DVD-R/RW)
The green color is displayed during disc writing session. (DVD-RAM, DVD+R/RW)
3. Emergency Eject Hole
4. Stop/Eject Button
5. 1394 Connector (6 pin) -This connector is used to connect to the 1394 FireWire.
6. USB Connector - This connector is used to connect to the USB converter cable.
7. Power Switch - Use this switch to turn the drive on and off.
8. Power Connector - This connector is used to connect to the AC Power adapter
cord.
5
Installation
Hardware Installation
NOTES
Connecting to computer
• Make sure you have a personal computer with
an open USB port or IEEE 1394 port before
connecting the drive to your computer.
• You cannot use the FireWire [IEEE 1394] and
USB interfaces simultaneously.
ON OFF
• Power for all device should be turn off before
attaching the cables.
Connect the drive to the computer as shown in
figure.
1. Connect the USB converter cable [or IEEE
1394 cable] to the External Super Multi DVD
Rewriter.
To AC wall
outlet.
2. Connect the other end of the USB converter
cable [or IEEE 1394 cable] to your computer.
3. Connect the AC adapter plug to the power
connector at the rear of the drive.
Attach the AC adapter to the AC wall outlet.
OR
4. When the computer is ready, confirm that the
drive is detected. And then, insert the supplied
software CD into the External Super Multi
DVD Rewriter and install the software.
NOTES
•
•
Please do not turn off the drive while the computer is searching for the drive.
If you turn off the drive, normal operation of the computer will not be possible.
Please do not connect the AC adapter and USB 2.0 converter cable by any means other
than specified above.
6
Removing the USB converter cable
The drive supports the plug and play(not swap) function of Windows, and can be
removed and inserted by performing the following operation.
1. Stop the application software being currently used.
2. Click the icon “
” of the taskbar located on your screen’s bottom right side.
3. Click “Safely Remove USB Mass Storage Device-Drive[x:]”.
4. Click “Ok” and then remove the USB converter cable.
NOTE
Don’t remove the USB converter cable when the busy indicator on the drive blinks,
or during computer startup.
7
Operation
Loading and ejecting a disc
Remember - AC adapter must be connected.
Make sure the power is turned on.
Loading a disc
1. Push the Eject Button to open the Disc tray.
2. Load a disc. (Label facing up.)
3. Close the Disc tray.
Ejecting a disc
1. Push the Eject Button to open the Disc tray.
2. Removing the disc.
3. Close the Disc tray after removing the disc.
Emergency Eject
This drive has a feature that allows the CD to be ejected manually in case of a drive
failure or a power outage.
NOTE: Don’t use this feature except in an emergency.
1) Turn the power OFF.
2) Poke a fine-tipped object (such as a straightened heavy duty paper clip) into the
small hole above the eject button. The front door will pop open and the disk tray
will come partway out.
3) Pull the front door to open it all the way, then grip the disc tray between thumb
and forefinger and gently pull it straight out.
NOTE: Use this feature for an ermergency
purpose only.
Using it excessively will cause malfunction.
* If you cannot get a good grip on the disc tray with your fingers, use a steel binder
clip or spring clamp to pull it out.
8
Playing a music CD
Listening to sound
When connected to a computer, you can play audio CD’s through your computer’s
audio system after setting Digital Audio mode.
Check your Windows or “Windows Media Player” manual for detail.
Playing DVD video and MPEG2 movie video
The drive must be connected to a computer, and basic installation already done.
Install the ‘PowerDVD’ software to your PC.
Inserting the disc will automatically start installation. Follow the wizard.
After installation, remove the PowerDVD software and put it away for safekeeping.
Inserting a DVD Video disc into the drive and it will play automatically.
NOTES
• DVD video region code:
Each region around the world has a different region number on the DVD video
movies being sold in a region.
The region code can be changed to other regions up to 5 times by using the
software decoder (PowerDVD).
If you change the region code 5 times, the drive will lock onto the last (5th change)
region code, and cannot change the drive to another region code.
This limitation is a requirement as licensees of DVD drive technology.
• When connecting with USB1.1 interface, due to it’s slow transfer time, picture
and sound may be disrupted when trying to view a DVD movie.
9
Appendix
Troubleshooting
If you are experiencing problems with the drive, verify the following items.
Since the problem may be caused by a device other than the drive, check other
things such as system settings or other software being used, etc.
If you cannot resolve the problem after verifying these items, contact your dealer
or our customer service department.
Problem
Possible Cause
Possible Solution
Cannot play a DVD or CD in 1. The disc is not inserted
1. Reinsert the disc correctly.
the drive or certain types of
discs cannot be read in the
drive.
correctly.
2. The disc is dirty.
3. The pick-up lens is dirty.
4. The disc is scratched or
warped.
2. Clean the disc surface.
3. Clean the pick-up lens.
4. Change the disc.
5. The disc uses a region
code that cannot be played
on the drive.
5. Refer to your system
manual for help.
Disc tray cannot be opened
1. AC Plug is not connected
to AC outlet.
1. Connect the AC plug
tightly.
2. Power Switch is not turned 2. Turn the Power Switch on
on.
and try again.
Drive is not detected by the
system.
1. The USB 2.0 converter
cable is not properly
connected.
1.Make sure USB 2.0 converter
cable is connected properly
and re-install the device driver.
2. Power Switch is not turned 2. Turn the Power Switch on
on.
and try again.
Drive will not play media or
certain types of CD or DVD
media
1. The disc doesn’t match
your system. Is the media
disc the correct format for
the type of system that you
are using.
1. Check the disc format.
(on a PC an ISO 9660 IBM
compatible PC format as
opposed to Apple/Mac
HFS disc or UNIX disc
formats will not function)
2. Has the Windows DVD-ROM
software driver program
been corrupted by a virus?
Run a Virus Scan program
and repair if possible.
2. Virus possibility.
10
Specifications
Supported Discs
DVD(Single/Dual), DVD-RW, DVD-R, DVD+RW, DVD+R, DVD+R
Double layer, DVD- RAM, CD-Digital Audio & CD-Extra, CD-Plus,
CD-ROM, CD-ROM XA-Ready, CD-I FMV, CD-TEXT, CD-Bridge,
CD-R, CD-RW, Photo-CD (Single & Multi-Session), Video CD,
DVD-VIDEO
Dimensions (WxHxD) 163.2 x 54 x 244.7mm
Weight
About 1.54Kg
Interface
Read/Write Speed
USB 2.0, IEEE1394
Write
Read
CD-ROM/R: 40X max
CD-RW: 40X max
DVD-ROM (Single/Dual):16X/8X max
DVD+/-RW: 8X max
DVD+/-R: 10X max
DVD-VIDEO: 8X max
DVD-RAM: 2X, 3X, 5X(Ver.2.2)
DVD+R Double layer: 8X
CD-R: 4X, 8X, 16X, 24X, 32X, 40X
CD-RW: 4X, 8X, 10X, 16X, 24X
DVD-R: 1X, 2X, 4X, 8X
DVD-RW : 1X, 2X, 4X
DVD+R: 2.4X, 4X, 8X, 12X
DVD+RW: 2.4X, 4X
DVD-RAM: 2X, 3X, 5X(Ver.2.2)
DVD+R Double layer: 2.4X
Data transfer rate
Sustained
CD-ROM : 6000 Kbytes/s (40X max)
DVD-ROM : 22160 Kbytes/s (16X max)
CD-ROM: 135msec (Typical)
Average Access
Time (Random)
DVD-ROM : 155msec (Typical)
DVD-RAM : 185msec (Typical)
Buffer capacity
MTBF
Read/Write
2 Mbytes
100000 Power On Hours (Duty Cycle 10%)
CD-R, CD-RW, DVD-RW, DVD+RW, DVD-RAM
Disc-at-once, Track-at once, Multi-session, Packet Write
Writing Methods
Power Requirement AC Adapter
Input
100-240V AC, 50/60 Hz
Output
5V/12V 1.5A
Operating Environment
Temperature
Humidity
5 to 35 degC
20 to 80 %
Storage Environment
Temperature
Humidity
-20 to 55 degC
15% to 85% RH
- The maximum data transfer rate varies according to the performance capabilities of the PC.
- For the sake of periodic improvements, specifications and appearance are subject to
change without notice.
- We have taken all possible measures to assure the quality of our products, but we cannot
be responsible for the consequences if defect occurs.
11
©
Copyright 2004
LG Electronics U.S.A. Inc.
1000 Sylvan Ave.
Englewood Cliffs NJ 07632
U. S. A.
Caution!
The disc rotates at high speed in the drive unit.
Use of worn, damaged, or non-standard discs can only
adversely affect the drive and cause the disc to shatter or
crush while in use.
Disc crush can only occur when you use a damaged
disc in the drive. It is an extremely rare occurrence, but
there are steps which can be taken to prevent it.
LG Electronics Canada Inc.
550 MATHESON Blvd. East Mississauga.
Ontario L4Z4G3 Canada
LG Electronics Deutschland GMBH
Jakob-Kaiser-Straße 12,
D-47877 Willich, Germany
Always check your discs before inserting them into
the drive.
1. Do not to use worn, cracked, damaged, warped or
poor quality discs, as this may cause damage to
your drive.
LG Electronics U. K. Ltd.
LG House, 250 Bath Road,
Slough Berkshire SL1 4DX
United Kingdom
2. Check the clear plastic on the center of the disc,
cracks here are the main cause of disc crush.
3. Do not play CDs which are a non-standard
(I.e. non-circular)shape, such as heart shaped
discs, or discs in the shape of a business card.
Goldstar France E.U.R.L
Paris Nord II 22, Avenue des
Nations-B.P.50372 VILLEPINTE
95945 ROISSY CDG CEDEX France
LG Electronics Italia S.P.A.
Centro Direzione “IL Quadrate” Via
Modigliani, 20090 Segrate (MI) Italy
How can you keep your discs from becoming
damaged?
1. When not in use, remove discs from the drive.
2. Keep discs in the original packaging and out of
direct sunlight and away from heat sources.
LG Electronics España
Complejo Europa Empressaries (Edif.Bruselas)
Ctra. N-VI 28230 Las Rozas Madrid Spain
Excessive vibration or a sudden jolt to the drive during
operation may cause a malfunction.
Avoid exposing the drive to sudden changes in
temperature as it may cause condensation to form
inside the drive.
LG Electronics Australia Pty Ltd.
23, pike st Rydalmere NSW 2116
LG Electronics Portugal S.A.
Quinta da Fonte – Edifício D. Amélia
Rua Vítor Câmara, nº2, Piso 2
2700-229 Paço d´ Arcos, Portugal
©2004 Made by
P/NO. 3828HM1056A Ver. A
|