Kodak 4620 User Manual

D V D P l a y e r

D V D 4 0 1 0 & D V D 4 6 2 0

U s e r M a n u a l

w w w . c y b e r h o m e . d e

CONTENT

Playing functions ......................................................................................................................31

Selecting a section of the disc to play ..............................................................................................................................31

1. Selecting a chapter using the DVD menu ............................................................................................................................................31

2. Playing from a specific time ..................................................................................................................................................................31

3. Playing a specific track, picture, title or chapter ..................................................................................................................................32

4. Playing a specific track, picture, title or chapter using the number buttons..........................................................................................32

5. Skipping through tracks, pictures, titles or chapters..............................................................................................................................33

Using the repeat features..................................................................................................................................................33

1. Repeating an entire disc or playlist ......................................................................................................................................................33

2. Repeating a track, title or chapter ........................................................................................................................................................33

3. Repeating a section of a disc ..............................................................................................................................................................34

Shuffle play........................................................................................................................................................................34

Playing a disc at different speeds (fast forward/fast backward)........................................................................................34

Slow play ..........................................................................................................................................................................35

Still the picture frame / Pause a disc ................................................................................................................................35

Playing a disc frame by frame ..........................................................................................................................................35

Zooming in and out of an image ......................................................................................................................................36

Using position markers (Bookmark) ..................................................................................................................................36

Suspending audio with the “MUTE” button ......................................................................................................................37

Changing the audio settings..............................................................................................................................................37

Displaying disc information................................................................................................................................................37

Display menu for DVD discs......................................................................................................................................................................38

Display menu for Video CDs......................................................................................................................................................................38

Time displays for Audio CDs ....................................................................................................................................................................39

Disc information for MP3, JPEG, MPEG, WMA and MPEG-4 or DivX files ............................................................................................39

Special features for DVD’s ......................................................................................................40

Using the DVD menu ........................................................................................................................................................40

Displaying subtitles............................................................................................................................................................40

Changing the camera angle ..............................................................................................................................................41

Special features for Video CD’s ..............................................................................................41

Using playback control (PBC) ..........................................................................................................................................41

Special features for MP3, JPEG, MPEG, WMA and MPEG-4 or DivX files ........................42

1. Navigating to a file or folder ..........................................................................................................................................42

2. Playing a file..................................................................................................................................................................42

3. Selecting the play mode................................................................................................................................................42

Additional features for JPEG files ..........................................................................................43

1. Rotation of a picture ......................................................................................................................................................43

2. Viewing thumbnails of your JPEG pictures ..................................................................................................................43

3. Making a slide show......................................................................................................................................................43

4. Zooming in and out ......................................................................................................................................................44

Creating a playlist ....................................................................................................................45

Creating a playlist of DVDs ..............................................................................................................................................45

Creating a playlist of Video CDs or Audio CDs ................................................................................................................46

Creating a playlist of MP3, JPEG, MPEG, WMA and MPEG-4 or DivX files ..................................................................46

User preferences ......................................................................................................................47

Important notes for moving in the setup menu..................................................................................................................47

Changing the language settings........................................................................................................................................47

Changing the video settings..............................................................................................................................................49

Changing the audio settings..............................................................................................................................................52

Changing the security settings ..........................................................................................................................................54

Changing the general settings ..........................................................................................................................................56

Troubleshooting ........................................................................................................................58

Specifications............................................................................................................................60

Glossary ....................................................................................................................................61

INTRODUCTION

Accessories

In addition to the DVD player, please make sure that the following accessories

are in the box when you open it. Check the contents of the package carefully,

as some items may be located under the packing foam.

Note: Pictures may deviate.

Remote control

Battery (CR2025, 3V)

(already included in the remote control)

Power cord - EU or UK version

(only for model DVD 4010)

Operation guide &

Safety instructions

or UK

D V D P l a y e r

D V D 4 0 1 0

D V D 4 6 2 0

U s e r M a n u a l

B e d i e n u n g s a n l e i t u n g

•

Region code information

This DVD player has been constructed and produced in the way that it adheres

to Local Management information, which are recorded on a Digital Versatile

Disc (DVD). If the number of the destination area on a DVD does not corre-

spond with the number of the destination area of this DVD player, this device

won’t be able to play the corresponding disc. The device is set to region code

ALL

You can find the region code on the back side of the DVD cover. DVD’s must

be labelled with “ALL” for all regions or with “2” for region 2, for that they can be

played in this device. Should another region be printed on the DVD, it cannot

be played in this DVD player. The list on the left side shows the various DVD

regions of the world.

Region 1 USA, Canada

Region 2 Europe, Middle East, South Africa,

Japan

Region 3 Southeast Asia, Taiwan

Region 4 Central and South America, Mexi-

co, Australia, New Zealand

Region 5 Russian federation, Africa (part),

India, Pakistan

Region 6 China

ENG

INTRODUCTION

Compatibility

Usable disc types

The following discs can be used in your DVD player for playback:

DVD-Video (Digital Versatile Disc)

DVD+RW (Digital Versatile Disc + rewritable)

DVD+R (Digital Versatile Disc + recordable)

DVD-R (DVD-Recordable)

DVD-RW (DVD-Rewritable)

R W

DVD+R DL (Dual layer DVD+R)

R DL

Audio CD (Compact Disc Digital Audio)

Video CD (format 1.x/2.0)

DIGITAL VIDEO

Super Video CD

SUPER VIDEO

CD-R (CD-Recordable) with audio/MP3/JPEG/MPEG/WMA contents

CD-RW (CD-Rewritable) with audio/MP3/JPEG/MPEG/WMA contents

Recordable

ReWritable

MPEG-4 discs, DivX^®3, DivX^®4, DivX^®5, DivX^®VOD-Videos, XviD

Kodak Picture-CD

Compatibility of PC created discs

When recording a disc with a PC, even if it is recorded in a compatible format

as listed above, there may be cases in which the disc cannot be played in this

device due to the application software setting used to create the disc. In this

case, please check with the software publisher for more detailed information.

Note:

Don’t load any exceptional discs in the player, as this will cause null playback

or other problems (e.g. also with copy-protected Audio CDs).

Data transfer rates

The maximum speed for playing CDs is 4x. The corresponding data transfer

rate is 600 KB/sec. The maximum speed for playing DVDs is 2x with a data

transfer rate of 2700 KB/sec.

INTRODUCTION

Taking care of player and discs

Handling of discs

- Please hold the disc by gripping the rim or by placing the index finger in the

central hole. Never touch the signal surface, which is shiny. This applies to

both sides of double sided discs.

- Never add labels or adhesive tapes on the discs and do not scratch or dam-

age the discs.

Labeling side

Surface

Labels

Tapes

Cleaning of discs

- Finger prints or stains on the surface of the disc can cause signal missing.

Depending on the degree of stain, the reflected luminosity from the signal sur-

face may be weakened, resulting in a poorer picture quality. Therefore, please

use a soft cloth and wipe in a radiating manner from the centre to the outer

rims when cleaning the disc.

- If the surface of your disc is very dirty, please wipe the disc with a moist cloth,

finally use a dry soft cloth to remove all the water stains.

- Never use electrostatic prevention products as well as solutions which contain

benzene, thinner or any other vaporizing substances, as they may damage

the disc surface.

Storage of discs

- To prevent discs from getting bent or deformed, they should be vertically kept

in the disc storage case.

- To prevent damages, avoid placing them in a car, which may contact direct

sunlight. Also avoid leaving discs in excessively cold or humid environments.

- For more information refer to the instructions that come with discs.

Discs to avoid

Please only use conventional, fully circular discs in this DVD player. It is not rec-

ommended to use warped, cracked, chipped or otherwise damaged discs in

this device.

Disc accessories

Do not use any disc accessory to improve the audio quality, disc protective

solutions or lens cleaner. These products may cause problems.

Cleaning of the DVD player

The control panel and the case of the player will only require occasional wiping

with a soft cloth. Areas with stubborn stains can be cleaned with a soft cloth

dipped in a neutral detergent. To prevent damaging the player, never use vapor-

izing solutions.

ENG

OPERATION

Operation of control panel DVD 4010

DVD 4010

1. DISC TRAY:

For inserting discs.

2. STANDBY LED: If the device is in Standby mode, the LED will light red. If

the Player is in operation, the LED will light green.

^3.K :

Opens or closes the disc tray.

4. H/G :

Press this button shortly to skip to the previous track,

chapter, title or picture. Hold down this button 2 seconds

for fast backward search while playing (2/4/8/16/32x).

5. E/F :

6. RC SENSOR:

7. A/I :

Hold down this button 2 seconds for fast forward search

while playing (2/4/8/16/32x). Press this button shortly to

skip to the next track, chapter, title or picture.

Remote control sensor window. Use the remote control

by aiming it at the remote control sensor window to per-

form functions.

Press this button to start the playback of a disc. During

playback, this is used to pause a disc. Press this button

again to resume normal playback.

8. J :

Press once to stop playback of a disc and save the loca-

tion of a stop point. The disc can be played back from the

stop point by pressing “A”. Press this button two times

to enter stop mode.

Switches the device on or off. When pressing this button

you can only go into Standby mode.

OPERATION

Operation of control panel DVD 4620

DVD 4620

1. ON / STANDBY: Switches the device on or off. When pressing this button

you can only go into Standby mode.

2. VFD DISPLAY: The front Vacuum Fluorescent Display shows informa-

tion about the unit’s operational status.

3. DISC TRAY:

^4.K :

For inserting discs.

Opens or closes the disc tray.

5. H/G :

Press this button shortly to skip to the previous track,

chapter, title or picture. Hold down this button 2 seconds

for fast backward search while playing (2/4/8/16/32x).

6. E/F :

Hold down this button 2 seconds for fast forward search

while playing (2/4/8/16/32x). Press this button shortly to

skip to the next track, chapter, title or picture.

7. STANDBY LED: If the device is in Standby mode, the LED will light red. If

the player is in operation, the LED will be off.

8. A :

9. I :

10. J :

Press this button to start the playback of a disc.

Press this button to pause a disc.

Press once to stop playback of a disc and save the loca-

tion of a stop point. The disc can be played back from the

stop point by pressing “A”. Press this button two times

to enter stop mode.

ENG

OPERATION

Operation of rear panel DVD 4010

VIDEO

AUDIO OUT

S-VIDEO

COAXIAL

RGB

AV SCART OUTPUT

1. AC IN:

For connection of the supplied AC power cord. Plug the

matching end of the power cord into the unit before con-

necting the other end to the wall socket.

2. COAXIAL:

Digital coaxial audio output for connection to a digital

audio device (amplifier/receiver). Please note that the

amplifier/receiver has to be compatible to Dolby Digital,

MPEG and/or PCM (for more information please refer to

the manual of your amplifier/receiver).

3. AUDIO OUT L/R: Analogue 2-channel audio outputs (white/red socket) for

connection to a television, AV receiver, beamer or stereo

system.

4. VIDEO:

Composite video output (yellow socket) for connecting to

a TV or AV receiver with a video input (CVBS, compos-

ite video) by an audio/video cable.

5. REGION CODE: Indicates that the device is set to DVD region code “2”.

6. RGB / SCART:

For connection to a television or monitor that is compat-

ible with this kind of connection by means of a 21-pin

SCART cable. This connection enables the output of

audio and video signals.

7. S-VIDEO:

S-Video output for connecting to a TV or AV receiver with

S-Video input by an S-Video cable. The S-Video output

can be used instead of the video output. By this, a high-

er video quality can be reached than with composite

video.

OPERATION

Operation of rear panel DVD 4620

1. COAXIAL:

Digital coaxial audio output for connection to a digital

audio device (amplifier/receiver). Please note that the

amplifier/receiver has to be compatible to Dolby Digital,

MPEG and/or PCM (for more information please refer to

the manual of your amplifier/receiver).

2. AUDIO OUT L/R: Analogue 2-channel audio outputs (white/red socket) for

connection to a television, AV receiver, beamer or stereo

system.

3. VIDEO:

Composite video output (yellow socket) for connecting to

a TV or AV receiver with a video input (CVBS, compos-

ite video) by an audio/video cable.

4. RGB / SCART:

For connection to a television or monitor that is compat-

ible with this kind of connection by means of a 21-pin

SCART cable. This connection enables the output of

audio and video signals.

5. REGION CODE: Indicates that the device is set to DVD region code “2”.

6. YCbCr/YPbPr:

High quality video output for connection to the compo-

nent video inputs of a television, AV receiver, beamer or

monitor by means of a YCbCr connecting cable. Please

note that the Progressive Scan signal is only available

over the component video output.

7. AC IN:

This device has a fixed power cord. Plug the other end

of the fixed power cord into the wall socket.

8. S-VIDEO:

S-Video output for connecting to a TV or AV receiver with

S-Video input by an S-Video cable. The S-Video output

can be used instead of the video output. By this, a high-

er video quality can be reached than with composite

video.

ENG

OPERATION

Operation of VFD display DVD 4620

3 4

1. DISC TYPE INDICATORS: Displays the type of the optical disc inserted -

DVD, SVCD, VCD, CD (Audio CD) or MP3. If a DVD+R/RW or DVD-R/RW

is inserted, DVD is displayed.

2. PLAYBACK INDICATOR: Indicates that the disc is playing.

3. PBC FUNCTION INDICATOR: Indicates that the PBC (Playback Control)

function is enabled.

4. PLAYBACK STATUS INDICATORS: Shows the playback status of a DVD,

CD or other optical discs.

• A: Currently playing

• I : Paused

5. MULTI-FUNCTION DISPLAY / TEXT LINE:

• Displays the elapsed or remaining playback time

• Display of information

6. TRACK INDICATOR: Displays the number of the current track and the

available tracks on Audio CDs. For this, please press the “DISPLAY” but-

ton on the remote control until “Display off” is displayed on the TV screen.

7. DOLBY DIGITAL: Indicates which sound mode is activated.

•

: A Dolby Digital sound signal is given out over the digital audio out-

put.

8. REPEAT FUNCTION INDICATOR: Indicates that the repeat chapter/

title/track (or all) function is active.

OPERATION

Messages on the display (only for model DVD 4620)

The following messages may appear on the display of your DVD 4620 player:

Indicates that the device is ready to operate.

The disc tray is opening.

HELLO

OPEN

The disc tray is closing.

The disc is read.

NO DISC

OFF

No disc has been inserted. If a disc is inserted, it perhaps cannot be read.

The player is in standby mode.

The DVD player is in hold mode. The disc can be played back from the stop

point later on by pressing the Play button “A”.

HOLD

STOP

ROOT

The DVD player is in stop mode.

The DVD menu is displayed.

}

TITLE

JPEG

A JPEG picture file is played.

UPGING

The player is updating software from CD.

Remote control

Operation of remote control

Preparing the remote control

The DVD player comes with a remote control. Simply pull out the plastic tab in

the remote control to activate the battery. The plastic tab - which covers the bat-

tery terminals - extends the life of the battery.

Plastic tab

Note: Please note that some models will not include this plastic tab.

Pull

Replacing the battery

If the remote control only operates when you get closer to the device, it means

that the battery has been used up. Please replace the battery with a new Lithi-

um battery (CR2025, 3V). To replace the remote control’s battery, the battery

holder must be removed. Be sure to take note of the polarity marking on the bat-

tery. The " + " side must face the bottom of the remote (the side without any but-

tons).

1. Use your thumbnail to slide the clip on the battery holder to the right side

and pull out the battery holder simultaneously in order to remove the battery

compartment.

Remote

control

bottom

ENG

OPERATION

2. Insert a new battery into the battery holder. Make sure that the positive side

(marked on the battery as “+”) is facing upwards.

3. Reinstall the battery holder into the remote control to complete the battery

installation.

Remote control

bottom

Using the remote control

You can use the enclosed wireless remote control to control this device. When

using the remote control, please aim at the device's remote control sensor,

located on the front of the device. A 30 degree angle is recommended for best

operation.

DVD 4620

30°

Note:

• Objects between the remote control and the sensor window may prevent

proper operation.

• Similar remote controls could interfere with the function of the player.

• Make sure not to store the remote control upside down or with any objects

pressing on the buttons - this could drain the batteries.

*Picture of model DVD 4620

Cautions regarding use of remote control

• Please do not expose the remote control to shock and liquids and do not place

it in areas with high humidity. Do not install or place the remote control under

direct sunlight, as the heat may cause deformation of the unit.

• When the remote sensor window is exposed to direct sunlight, it may not work

properly. If so, please operate the remote control closer to the remote sensor

window or change the angle of the lighting or device.

Important notes about the battery

• If the unit is not used for a longer period of time, we recommend you to

remove the battery.

• Please do not use batteries other than specified. Improper use of batteries

can result in a leakage of chemicals and/or explosion.

• In case of any leakage of batteries, dispose of the batteries right away and

avoid touching the chemical discharge. Make sure to clean the remote con-

trol’s battery compartment before installing a new battery.

OPERATION

Remote control buttons

POWER

Switch on/off: To switch the device on or off (only stand-

by mode).

DISPLAY

Screen display for indicating the disc and time informa-

tion.

SETUP

OSD menu: To call up or cancel the main menu.

To open or close the disc tray.

^OPEN/CLOSEK

TITLE

For DVDs, this displays the DVD menu.

MENU “PBC”

To enter the menu of DVD discs or to select the PBC

function for VCD discs.

GOTO

Used for the direct selection of a track, picture, title,

chapter or time for intended play. Follow with the corre-

sponding number button.

POWER

TITLE

DISPLAY

SETUP OPEN/CLOSE

PBC

GOTO

AUDIO

PROGRAM

MUTE

PROGRAM

ANGLE

This can be used to set up a playlist.

ANGLE

SUBTITLE

Changes the camera angle depending on the disc con-

tent (only supported on DVDs).

PLAY

STOP

SUBTITLE

AUDIO

MUTE

For DVDs, this can be used to display subtitles and

select the language to use.

ENTER

PAUSE

Interchanges the audio settings depending on the disc

content (on DVDs, VCDs and Audio CDs).

RETURN BOOKMARK

ZOOM

SLOW

To turn off the sound. Press again to turn sound on

again.

1/ALL

REPEAT

A-B

Fast backward: Fast backward search while playing

(2/4/8/16/32x). Not possible with JPEG files.

C, D, B, A

Direction buttons: Up, down, left, right.

VOLUME

10+

Fast forward: Fast forward search while playing

(2/4/8/16/32x). Not possible with JPEG files.

Play: Press this button to start the playback of a disc.

ENTER

Select: To select options in menus.

Stop: Stops the playback, but holds the resume location.

Enters Stop mode after pressing the button two times.

Select previous title: Press this button to skip to the

previous track, picture, chapter or title.

Select next title: Press this button shortly to skip to the

next track, picture, chapter or title.

Pause/Stepwise: This is used to pause a disc. Press

again to resume playback (on Audio CDs, MP3s, WMAs)

or to advance frame by frame on a still image (on DVDs,

VCDs).

ENG

OPERATION

RETURN

For returning to the previous menu and/or last playing

position (for DVDs and VCDs).

POWER

TITLE

DISPLAY

SETUP OPEN/CLOSE

BOOKMARK

To store specific portions of the disc in memory and play

them immediately whenever you want without the need

to search.

PBC

GOTO

AUDIO

PROGRAM

MUTE

ANGLE

SUBTITLE

ZOOM

For zooming in and out of the picture.

PLAY

SLOW IA

Slow play: Slow forward search while playing (1/2, 1/4,

1/8, 1/16). Also possible in reverse with DVDs.

STOP

ENTER

0-9, 10+

Number buttons: 0-9, 10+. Use the “10+” button to

enter numeric values greater than 10. Press once for

each value above 10, then enter the corresponding num-

ber by using “0-9”. Press twice for values above 20, etc.

PAUSE

RETURN BOOKMARK

ZOOM

SLOW

Nevertheless, many functions work by only entering the

corresponding number buttons.

1/ALL

REPEAT

A-B

REPEAT “1/ALL”

REPEAT “A-B”

Repeats an entire disc, track, picture, chapter or title.

Repeats the sequence stipulated by two selected play-

back points.

VOLUME

10+

VOLUME +

Increases the volume level.

Delete: For deleting the last entry.

Decreases the volume level.

VOLUME -

AUDIO AND VIDEO CONNECTIONS

Television connections

In order to use your DVD player, you will need to make a video connection to

your TV. The capabilities of your TV and the cables you have on hand will deter-

mine the connections you can use. There are three (model DVD 4010) respec-

tively four (model DVD 4620) possible connection types:

ᕡ

Composite video - The most widely used connection. An audio/video

cable for composite video is required.

ᕢ

RGB (over SCART) - Audio and video connection which enables an opti-

mal picture quality. This connection possibility requires a SCART cable.

ᕣ

S-Video - A higher quality connection that requires a special S-Video cable

and a S-Video capable TV.

ᕤ

Component Video & Progressive Scan - The highest quality video con-

nection. Supported on high-end TVs or beamers and requires a special

cable. This connections is only possible with model DVD 4620.

In detail:

Audio/Video connection to a TV with composite video and stereo

audio input

If your TV has only a single Video input jack, typically a yellow-coloured plug,

you will use the composite video output of your DVD player for the video con-

nection. For the audio connection you can use the red and white stereo audio

in connectors of your TV.

Composite video

input jack

Have the following cables ready:

1. Audio/Video cable - red, white and yellow plug (not supplied)

2. Power cord (Please note that model DVD 4620 has a fixed power cord!)

STEREO AUDIO INPUT

VIDEO INPUT

WHITE

RED

YELLOW

*Picture of model DVD 4620

1. Use an audio/video cable to connect the video output of your DVD player to

the video input of your TV. This is normally a yellow-coloured connector that

matches the video output on the back of this unit.

ENG

AUDIO AND VIDEO CONNECTIONS

2. If you wish to hear sound through the TV, connect the stereo audio outputs

of your DVD player to the matching inputs of your TV using the red and white

connectors on the optionally supplied audio/video cable.

3. If you are using model DVD 4010, connect the supplied AC power cord to

the “AC IN” inlet on the rear side of this unit, then plug into a power outlet.

As model DVD 4620 has a fixed power cord, only plug the other end of the

fixed power cord into the wall socket, if you are using model DVD 4620.

4. Turn on the TV and the DVD player.

5. Select the corresponding video input on your TV. For this please refer to the

user manual of your TV. You should now see the DVD player’s splash

screen on your TV.

Audio/Video connection to a TV with SCART socket

If your TV has a SCART socket, you can optionally connect your device with the

TV over the SCART socket. The advantage is here an optimal picture quality.

Have the following cables ready:

1. SCART cable (not supplied)

2. Power cord (Please note that model DVD 4620 has a fixed power cord!)

RGB / AV SCART OUTPUT

SCART CABLE

SCART INPUT

*Picture of model DVD 4620

1. Use a completely connected SCART cable to connect the SCART output of

your DVD player to the SCART socket of your TV.

2. If you are using model DVD 4010, connect the supplied AC power cord to

the “AC IN” inlet on the rear side of this unit, then plug into a power outlet.

As model DVD 4620 has a fixed power cord, only plug the other end of the

fixed power cord into the wall socket, if you are using model DVD 4620.

3. Turn on the TV and the DVD player.

4. If the TV offers the possibility to choose manually between RGB and CVBS,

you should set your TV to RGB in order to achieve a better picture quality. If

the DVD player is connected with the TV over the SCART cable, the TV

automatically switches to the DVD mode when you turn on the player (if the

TV supports this function).

AUDIO AND VIDEO CONNECTIONS

Audio/Video connection to a TV with S-Video and stereo audio

input

If your TV has an S-Video input, it is recommended that you use this Video con-

nection. The S-Video connector is distinguishable by its 4 pins, as shown on the

left side. S-Video separates brightness and colour signals, resulting in a higher

video quality than standard composite video. For the audio connection you can

use the red and white stereo audio in connectors of your TV.

S-Video socket

Have the following cables ready:

1. S-Video cable (not supplied)

2. Audio/Video cable - red and white plug (not supplied)

3. Power cord (Please note that model DVD 4620 has a fixed power cord!)

RED

WHITE

STEREO

AUDIO INPUT

S-VIDEO INPUT

*Picture of model DVD 4620

1. Use a special S-Video cable (not included in your accessory) to connect the

S-Video output of your DVD player to the S-Video input of your TV.

2. If you wish to hear sound through the TV, connect the stereo audio outputs

of your DVD player to the matching inputs of your TV using the red and white

connectors on an audio/video cable.

3. If you are using model DVD 4010, connect the supplied AC power cord to

the “AC IN” inlet on the rear side of this unit, then plug into a power outlet.

As model DVD 4620 has a fixed power cord, only plug the other end of the

fixed power cord into the wall socket, if you are using model DVD 4620.

4. Turn on the TV and the DVD player.

5. Select the S-Video input on your TV. For this please refer to the user man-

ual of your TV. You should now see the DVD player’s splash screen on your

TV.

ENG

AUDIO AND VIDEO CONNECTIONS

Note:

Video connection to a TV / Beamer with component video inputs

This connection is only possible

with model DVD 4620.

(YCbCr / YPbPr)

Component video separates the video signal into three separate “components”,

resulting in a higher picture quality than S-Video or standard composite video.

In order to use component video, you have to use a TV/Beamer equipped with

component video inputs.

You will also need a component/P-Scan video cable (not included) with sepa-

rate connectors for Y, Cb/Pb and Cr/Pr signals. This type of cable also supports

the Progressive Scan mode when used with high-end P-Scan TVs. Using the

component video output or P-Scan mode requires the following steps:

1. Preparation:

- First, use an audio/video cable or S-Video cable to connect the DVD play-

er to the composite video or S-Video input on your TV/beamer.

- If you are using model DVD 4010, connect the supplied AC power cord to

the “AC IN” inlet on the rear side of the player, then plug into a power out-

let. As model DVD 4620 has a fixed power cord, only plug the other end of

the fixed power cord into the wall socket, if you are using model DVD 4620.

- Turn on the TV/beamer and the DVD player and select the corresponding

video input on your TV/beamer.

2. Entering the setup menu to change the Video setting:

Enter the player’s setup menu by pressing the “SETUP” button on the

remote control. Use the direction button “A” to navigate to the “Video

setup page”, then press “ENTER”, navigate down to the “Video output”

menu and press “ENTER” to enter the menu. Use the direction button “D”

to proceed down to the “YUV” setting and press “ENTER” to confirm your

selection.

Video setup page

TV shape

TV type

Video output

Video mode

P-Scan mode

Video quality

PAL

S-Vi S-Video

YUV

Auto RGB

YUV output

3. Connecting the player using the component video cable:

Unplug the composite video or S-Video cable and connect the component

video cable to the appropriate jacks on your TV/Beamer. Normally, cables

and jacks are color-coded to make the connection easier. Then adjust the

TV’s/Beamer’s video input setting to correspond to the component video

input.

COMPONENT VIDEO CABLE

TV or

Beamer

COMPONENT

VIDEO INPUT

AUDIO AND VIDEO CONNECTIONS

4. Using a Progressive Scan TV:

Now that you are using the component video output, you can change the

video mode setting to enable the Progressive Scan mode. Do not change

this setting if you are not sure that your TV supports Progressive Scan.

Using the direction buttons and the “ENTER” key, you can change the set-

ting to “P-Scan”. On the screen will now be displayed a warning hint. Fol-

low the instructions on the screen.

Video setup page

TV shape

TV type

Video output

Video mode

P-Scan mode

Video quality

PAL

YUV

P-Scan

Auto Interlace

Progressive-Scan mode

Progressive Scan is a method of making a computer picture by drawing all

the scan lines sequentially from top to bottom resulting in a slightly brighter,

more stable and flicker free picture.

Audio output connections

This unit features different audio line outputs for connection to a receiver or TV.

There are two possible connection types:

ᕡ

Analog stereo outputs

ᕢ

Coaxial digital output

ᕡ

Audio connection to a TV / receiver using the analogue stereo

outputs

Have the following cable ready:

1. Audio/Video cable - red and white plug (not supplied)

Connect the stereo audio outputs of your DVD player to the matching inputs of

your TV or receiver using the red and white connectors on an audio/video

cable.

STEREO AUDIO INPUT

WHITE

RED

*Picture of model DVD 4620

ENG

AUDIO AND VIDEO CONNECTIONS

ᕢ

Audio connection to a receiver using the coaxial digital audio output

At the back of the DVD player, there is a digital audio output socket “COAXI-

AL” for a coaxial cable.

This can be used to connect the following:

• an A/V receiver or an A/V amplifier with a digital multi-channel sound

decoder (MPEG-2, Dolby Digital)

• a receiver with two channel digital stereo (PCM)

What is digital multi-channel sound?

Digital multi-channel sound offers you a maximum of sound quality. You need a

multi-channel A/V receiver or amplifier that supports at least one of the audio

formats of the DVD player (MPEG-2, Dolby Digital). For the formats that your

receiver supports, refer to the manual of the receiver.

Have the following cable ready:

1. Coaxial cable (not supplied)

RECEIVER

COAXIAL DIGITAL INPUT

*Picture of model DVD 4620

Connect the coaxial digital output with the corresponding input on the AV

receiver by means of a coaxial cable (not included in your accessory). The

coaxial digital audio output sends an encoded “RAW” digital audio signal to your

receiver for decoding. Please note that this connection is only possible if your

digital receiver is compatible to Dolby Digital, MPEG and/or PCM.

A loud distorted noise comes from your loudspeakers:

In this case the receiver is not suitable for the digital audio format of the DVD

player. Playback with 6 channel digital surround sound is only possible, if the

receiver has a digital multi-channel sound decoder.

GETTING STARTED

Powering on the unit

Only after all connections are complete, connect the power cord and power on

the unit.

1. Plug the standard electrical plug into a wall socket or power strip.

2. The unit is now in Standby mode. Press the button “ON/STANDBY” on the

front panel or the button “POWER” on your remote control to power the

device on. Once the unit has been turned on, the unit will always be either

ON or in STANDBY MODE.

Notes on power states

There are three power states for this unit:

• OFF - The unit is not plugged into a wall outlet. The unit draws no power.

• STANDBY - The unit is plugged into a wall outlet. The unit has not been

taken out of standby by pressing either the button “ON/STANDBY” on the

front panel or the button “POWER” on the remote control. The unit draws

a slight amount of power to enable the remote control receiving circuit.

The standby LED is glowing red.

• ON - The unit is plugged into a wall outlet and either the button

“ON/STANDBY” on the front panel or the button “POWER” on the remote

control has been pressed. The unit is ready to use. The LED is now glow-

ing green (model DVD 4010) respectively off (model DVD 4620).

POWER

TITLE

DISPLAY

SETUP OPEN/CLOSE

PBC

GOTO

AUDIO

PROGRAM

MUTE

SUBTITLE

ANGLE

*Picture of model DVD 4620

3. When the screen display indicates “Loading”, the disc is read.

4. If no disc is inserted, the screen display will indicate “No disc”.

Inserting a disc

1. Press the Open/Close button “K” on the front panel or on the remote con-

trol to open the tray. The screen display will indicate “Open”.

2. Carefully place the disc in the tray with the label facing up. Be careful not to

touch the playing surface. Hold the disc by the sides and with your fore fin-

ger through the hold in the middle and insert gently into the tray.

How to insert a double-sided DVD?

Labeling side

Surface

Double-sided discs do not have labelling over the whole surface. The

labelling for each side is in the centre of the disc. To play a side its label

must be facing up.

^{3. Press the Open/Close button “}K” again to close the tray. The screen dis-

play shows “Close”.

4. The inserted disc type is indicated on the screen. If the disc supports the

Auto Play function, playback will begin automatically.

ENG

GETTING STARTED

Start playing

1. Press the Play button “A” to start playing the disc.

2. If the disc inserted is a DVD disc, the title menu can be selected for playing

or various special playing functions can be selected depending on the con-

tent of the disc.

3. If the disc inserted is a VCD disc with PBC function, the menu will appear

on the screen and the operation can be done according to the instructions

in the menu or the “PBC” button can be pressed to remove the PBC func-

tion and to play directly.

4. If the VCD disc does not have PBC function or if the disc inserted is an ordi-

nary music CD, the entire disc will be played directly.

Pausing a disc

1. With DVDs and Video CDs, you can pause the playback on a still frame by

pressing the Pause button “I”.

2. Pressing the Pause button while playing Audio CDs, MP3s or WMAs, this

will mute the sound and hold the play position.

3. Press the Play button “A” to resume normal playback.

Stop playing

1. Press the Stop button “J” to stop the playback of the disc.

2. After the Stop button has been pressed, the CyberHome splash screen will

be displayed on the screen with Audio CDs, DVDs and Video CDs. The stop

point is now saved and you can resume playback by pressing the Play but-

ton “A”.

3. Pressing the Stop key “J” twice will reset the play position to the beginning

of the disc.

Removing a disc

Press the Open/Close button “K” on the front panel or on the remote control.

The screen display indicates “Open”, the tray opens and you can remove the

disc.

Switching off the power

After pressing the button “ON/STANDBY” on the front panel or the button

“POWER” on your remote control, the device will go into standby mode. In

order to switch the device completely off, please remove the power cord from

the wall socket.

PLAYBACK

General playback hints

This DVD player will play the following discs:

• DVD

• Video CD

• Super Video CD

• MPEG-4 or DivX discs

• DVD+RW (video mode / ISO 9660, finalised)

• DVD+R (video mode / ISO 9660, finalised)

• DVD-RW (video mode / ISO 9660, finalised)

• DVD-R (video mode / ISO 9660, finalised)

• DVD+R DL

• CD-R

• CD-RW

• Audio CD

• MP3

• Kodak Picture CD

You can operate the DVD player using the remote control or the buttons on the

front panel of the DVD player.

Problems:

“

” will be displayed on the screen:

Some discs can be manufactured so that certain steps are required before the

disc can be played, or so that only limited operation is possible during playback.

When an “ ” appears on the screen, the selected feature is not possible.

The screen is showing the message “Wrong region”:

• Since DVD films are normally not released in all parts of the world at the same

time, all DVD players have a specific region code. Discs can be given an

optional region code. If the region codes differ between the player and the

disc, playback is not possible.

• You can find the region code on the back of the device.

• The region code does not apply to recordable DVD discs.

Playing a DVD

1. If playback does not start automatically, press the Play button “A”.

2. To stop the disc, press the Stop button “J” on the remote control or on the

front of the device.

^{3. To eject the disc, press the Open/Close button “}K” on the remote control

or on the front of the device.

DVD menu:

When playing a DVD, a menu may appear. If the titles and chapters are num-

bered, press a number button on the remote control. You can also use the

direction buttons “C”, “D”, “B” and “A” to select a menu item and confirm

with the button “ENTER”.

You can also access the menu using the button “MENU” or “TITLE” on the

remote control.

ENG

PLAYBACK

Playing a DVD+R/RW, DVD-R/RW or DVD+R DL disc

1. If playback does not start automatically, select the title you want to play

using the direction button “C” or “D”.

2. Press the Play button “A” or the button “ENTER” to start the playback.

3. To stop the disc, press the Stop button “J” on the remote control or on the

front of the device.

^{4. To eject the disc, press the Open/Close button “}K” on the remote control or

on the front of the device.

Playing a (Super) Video CD

(Super) Video CDs may be equipped with PBC (Playback Control). This means

that special playback functions (menus) can be selected directly. The Video CD

must be PBC-compatible (see CD packaging).

1. Insert a (Super) Video CD. If playback does not start automatically, press the

Play button “A” on the remote control or on the front of the DVD player.

2. If a menu appears on the screen, use the number buttons “0-9” to select the

menu option you want. If the PBC menu contains a title list, the desired title

can be chosen directly.

3. Stop playback using the Stop button “J”.

Playing MPEG-4 or DivX discs

You can also use your DVD player to play discs with MPEG-4, DivX and XviD

multimedia content. These formats have been developed for space-saving

compression and saving of video respectively multimedia data (video, picture

and audio data) in high quality. This DVD player can play MPEG-4, DivX and

XviD files burned on CD-R/RW/ROM, DVD-R/RW and DVD+R/RW discs

(according to ISO 9660).

Attention:

Compatibility:

• Multi-session playback not possi-

ble

• Unfinalized disc playback not pos-

sible

• MPEG-4 video decoding as defined by ISO 14496-2 standard:

- Simple Profile (SP)

- Advanced Simple Profile (ASP) with GMC (Global Motion Compensation,

1WP) and Q-Pel (Quarter Pixel) interpolation

• Decoding of DivX :

- Official DivX Ultra Certified product

- Plays all versions of DivX video (including DivX 6) with standard playback

of DivX media files

• Decoding of XviD

• File formats: *.avi, *.div, *.divx (used by DivX and XviD) - Please note that

all files with the .avi extension are recognized as MPEG-4, but not all of these

are necessarily DivX video files and therefore may not be playable on this

DVD player.

PLAYBACK

00:00 00:00

001 041

1. Insert an MPEG-4 or DivX disc. On the screen will appear the menu as

shown on the left side. Select the required folder using the direction button

“C” or “D” and press “ENTER” to confirm your selection. Select now title

you want to play.

Sport

01_divx

AAVVII

02_divx

AAVVII

03_divx

AAVVII

04_divx

AAVVII

2. Press the Play button “A” or the button “ENTER” to start the playback.

05_divx

AAVVII

Note:

The player may take some time to find a DivX title on the disc when star-

ting the playback. This is normal.

3. Stop playback using the Stop button “J”.

Notes about DivX^®VOD content

In order to play DivX VOD (video on demand) content on this player, you first

need to register the player with your DivX VOD content provider. To do this

you need to submit the DivX VOD registration code to your provider.

Note:

• DivX VOD content is protected by a DRM (Digital Rights Management)

system. This restricts playback of DivX VOD content to specific and registe-

red devices.

• If you insert a disc that contains DivX VOD content not authorized for your

player, the message “Authorization error” is displayed on the screen and

the content will not play.

Displaying the DivX VOD registration code:

1. Press the button “SETUP” to enter the OSD menu of your player.

2. Use the direction buttons “B” and “A” to select the “General setup page”

and confirm with the button “ENTER”.

3. Select the menu “DivX(R) VOD” by pressing “D” or “C” and press

“ENTER” or the direction button “A”.

General setup page

Angle mark

Captions

Screen saver

PBC

Memory

Version

Off

4. Press again “ENTER”. Your 8-digit registration code is now displayed. Make

a note of the code as you will need it when registering with a DivX VOD

provider.

DivX(R) VOD

Default

Displays the DivX registration code

Playing DivX VOD content:

Some DivX VOD content may only be playable a fixed number of times. When

inserting a disc containing DivX VOD content, the remaining number of plays

is shown on-screen. Then you have the option of playing the disc (thereby using

up one of the remaining plays), or stopping. If you insert a disc containing

expired DivX VOD content (e.g. content that has zero remaining plays), the

message “Rental expired” is displayed.

If your DivX VOD content allows an unlimited number of plays, then you may

play the disc as often as you like.

ENG

PLAYBACK

Playing an Audio CD

You can also use your DVD player to play Audio CDs.

1. Insert an Audio CD. Playback starts usually automatically. If playback does

not start automatically, press the Play button “A” on the remote control or

on the front of the DVD player.

Track 02/04

0:02:19

Note for Audio CD display:

If the TV is on, the current track number, the available tracks on the disc and

the time information will be shown on the TV screen (see illustration on the

left side). You can also switch this display off by pressing the “DISPLAY”

button on your remote control.

2. Stop playback using the Stop button “J”.

Attention:

Additional playing functions:

When playing a copy-pro-

tected Audio CD, your play-

er may produce some mis-

takes due to the copy pro-

tection (e.g. when display-

ing the time). This is no fault

of your DVD player.

• With the button “H” or “F” you can select the previous or next track.

• When playing an Audio CD, you can also use the repeat functions. For this

please use the buttons “REPEAT A-B” and “REPEAT 1/ALL”.

Playing an MP3 disc

MP3 (MPEG1 Audio Layer-3) files are highly compressed music files. Using this

technology the data volume can be compressed by a factor of 10. This means

it is possible to record 10 hours music in CD quality on a single CD-ROM.

When creating MP3 discs, please note the following:

• File system: ISO9660, Joliet

• Formats: *.mp3

• File names: maximum 64 ASCII characters (Joliet)

1. Insert an MP3 disc. If playback does not start automatically, select the requi-

red folder using the direction button “C” or “D” and press “ENTER” to

confirm your selection. Select now the track you want to play.

00:00 00:00

002 025

Note for MP3 display:

If the TV is on, the MP3 screen appears automatically (see illustration on the

left side). The current selected track or folder will be highlighted on the TV

screen.

MUSIC

MP3

Track 1

MP3

Track 2

Track 3

Track 4

Track 5

Note :

• To return to the folder selection, please press the direction button “B”.

• You are able to switch between the folders and files available on the disc

by pressing the “PROGRAM” button.

2. Press the Play button “A” or the button “ENTER” to start the playback.

3. Stop playback using the Stop button “J”.

Additional playing functions:

• With the button “H” or “F” you can select the previous or next track.

• When playing an MP3 disc, you can also use the repeat function. For this

please use the buttons “REPEAT 1/ALL” and “REPEAT A-B” .

PLAYBACK

Playing a WMA CD

WMA = Windows Media Audio. A streaming media format for audio and video

developed by Microsoft.

1. Insert a WMA CD. If playback does not start automatically, select the requi-

red folder using the direction button “C” or “D” and press “ENTER” to

confirm your selection. Select now the WMA file you want to play. If the TV

is on, there will be shown the same display as for MP3 discs (see illustrati-

on in section “Playing an MP3 disc”) and the same features as when play-

ing MP3 discs will be available.

2. Press the Play button “A” or the button “ENTER” to start the playback.

3. Stop playback using the Stop button “J”.

Playing a Picture CD

You can also use your DVD player to play Picture CDs, e.g. Kodak Picture CDs

or CD-R/RW discs with JPEG files.

1. Insert a Picture CD. If playback does not start automatically, select the requi-

red folder using the direction button “C” or “D” and press “ENTER” to

confirm your selection. Select now the JPEG file you want to play and press

the Play button “A” to show the picture on the screen.

2. As the disc is playing, pressing the Stop button “J” will display the picture

album. This consists of a small image for each of the picture files found on

the disc, twelf pictures can be shown at one time (see the figure on the left

side). Navigate to a picture by pressing the direction keys.

Note:

With the button “H” or “F” the previous or next twelve pictures can be

shown (if available).

3. With the Play button “A” you can resume playback.

Slide Show

Prev. Next

4. Stop playback using the button “MENU” on the remote control. If the pictu-

re album is displayed, press the Stop button “J” to return to the on-screen

menu.

ENG

PLAYBACK

Playing a mixed format disc

You can also use a mixed format disc in this DVD player. Mixed format discs

contain both audio and still picture files, e.g. a Picture CD that contains additio-

nally MPEG-4, DivX , MP3, MPEG and/or WMA files.

1. Insert a mixed format disc. The player will launch an on-screen menu that

lets you easily select and play MPEG-4, DivX^®, MP3, JPEG, MPEG and

WMA files stored on CD-R/RW, DVD+R/RW, DVD-R/RW discs. The menu

gives you several options for playback, including repeat and shuffle modes.

MPEG-4 or DivX^®files have to be saved with the extension “.avi”, “.div” or

“.divx”, MP3 files with the extension “. mp3” (e.g. “Song.mp3”), JPEG pictu-

res with the “. jpg” extension, MPEG files with the “.mpeg” extension and

WMA files with “.wma”.

00:00 00:00

002 025

MIX

MP3

Another day

Start

Action

Peace on earth

MP3

Mysterious way

MP3

Resolution 360

268

2. Select the required folder using the direction button “C” or “D” and press

“ENTER” to confirm your selection. The files of the corresponding folder will

now be shown on the screen. Select now the file you want to play by pres-

sing again the up and down direction keys. Press then “ENTER” or the Play

button “A” to start playback. Note: If you selected first a music file and

then a JPEG image file, the music keeps running while watching the

image, provided that you did not stop playback of the music file.

3. Stop playback using the Stop button “J” (with MPEG-4, DivX^®, MP3, WMA

and MPEG files) or the button “MENU” (with JPEG files) on the remote con-

trol.

Note:

• CD-R/RW discs containing MPEG-4, DivX , MP3, JPEG, MPEG or WMA files

should be in ISO 9660, Mode 1, Closed Session format for best compatibility.

• Attention: The files will be sorted numerically and alphabetically by your

DVD player.

PLAYING FUNCTIONS

Selecting a section of the disc to play

If you do not want to play the entire disc, you can select a section to play using

one of the following options:

1. Selecting a chapter using the DVD menu

Some DVDs are provided with a menu that, among other options, allows you to

select a specific chapter to play.

1. DVD menus will sometimes be displayed automatically when starting play-

back. Others only appear when pressing the button “MENU” or “TITLE” on

your remote control (dependant on the disc). If the disc does not have a

menu, the symbol “ ” will be displayed on the screen.

2. Use the direction buttons to highlight the chapters option in the menu. Press

the button “ENTER” to display the available chapters.

3. Use the direction buttons to highlight the chapter that you want to play and

press “ENTER”. The menu is closed and the chapter is immediately play-

ed.

2. Playing from a specific time

You can jump directly to a specified time. If for example the length of a track is

4 minutes and 37 seconds, you can start playback from the 4th minute so that

you only listen to the latest 37 seconds.

1. Press the button “GOTO” on your remote control until either the option

“Disc time” or “Track time” (for Audio CDs and Video CDs), “Title time”

or “Chapter time” (for DVDs) is displayed on the screen. When playing

MP3, MPEG, WMA and MPEG-4 or DivX^®content, the time input field will be

highlighted after pressing the “GOTO” button two times. The total time of the

disc, track, title or chapter is displayed behind the option.

Disc time:

- - : - - (14:31)

2. Use the number buttons “0-9” on your remote control to enter the time that

you want to move to in the format h:mm:ss. When entering the wrong num-

ber, please press the button “C” on your remote control to delete your input.

When you have finished entering the time, the option is closed and the disc,

track, title or chapter is played from the time entered.

*Video CD display

ENG

PLAYING FUNCTIONS

3. Playing a specific track, picture, title or chapter

Title 01/48

Chapter

/45

If there are more than one track, picture, title or chapter available on a disc, you

can move to a special track on Audio CDs, MP3s, WMAs, MPEGs and Video

CDs, a special picture on Picture CDs, a special title on MPEG-4 or DivX^®discs

or a special chapter and title on DVDs that support this feature.

1. Press the button “GOTO” on your remote control until either the option

“Select track” (for Audio CDs and Video CDs) or “Title and Chapter” (for

DVDs) is displayed on the screen. When playing MP3, JPEG, MPEG, WMA

and MPEG-4 or DivX^®content, the input field will be highlighted. The total

number of tracks, pictures, titles or chapters is displayed behind the input

field.

*DVD display

Note:

• If there are more than nine tracks,

titles or chapters when playing

Audio CDs, Video CDs or DVDs,

you must press the button “+10”

and enter the next digit. For exam-

ple, press the button “+10” and

enter 2 to play track 12.

2. Use the number buttons “0-9” on your remote control to enter the track, pic-

ture, title or chapter you want to jump to.

3. When you have finished entering the numbers required, the menu is closed

and the selected track, picture, title or chapter is played. If the menu is not

automatically closed, press the button “ENTER”.

• If there are more than 19 tracks, tit-

les or chapters, you must press the

button “+10” twice and enter the

next digit. For example, press the

button “+10” twice and enter 2 to

play track 22.

4. Playing a specific track, picture, title or chapter using

the number buttons

When playing a DVD,Video CD, MPEG-4 or DivX^®disc, AudioCD,MP3, JPEG,

MPEG or WMA disc, you can jump directly to a track, picture, title or chapter.

1. Press the number buttons that correspond to the track, picture, title or chap-

ter you wish to play, e.g. to play track number 1, press 1 or to play track num-

ber 11, press the button “+10” and 1 on your remote control. To play a track

above 20, press the button “+10” two times, and so on.

1/ALL

REPEAT

A-B

VOLUME

2. In Stop mode of DVDs, pressing the number buttons that correspond to the

title you wish to play will jump directly to the required title.

10+

Note:

• Using the number buttons with Video CDs may require the PBC function to be

disabled. To disable PBC, press the “PBC” button.

• With MP3, JPEG, MPEG, WMA and MPEG-4 or DivX^®files you do not need

to use the button “+10”. Only enter the corresponding number buttons using

“0-9”.

PLAYING FUNCTIONS

5. Skipping through tracks, pictures, titles or chapters

While you are playing a disc you can skip to the next or previous track (on an

Audio CD, MP3, MPEG, WMA or Video CD), picture (on a Picture CD), title (on

a MPEG-4 or DivX^®disc) or chapter (on a DVD). This is carried out using the

“F” and “H” buttons on your remote control.

1. To skip to the beginning of the next track, picture, title or chapter press the

button “F”.

PLAY

2. To skip to the beginning of the previous track, picture, title or chapter press

STOP

ENTER

the button “H”.

PAUSE

RETURN BOOKMARK

ZOOM

SLOW

Note:

You can also use the buttons “H/G” and “E/F” on the front panel of the

device.

*Picture of model DVD 4620

Using the repeat features

The repeat feature allows you to repeat a section of a disc once it has finished

playing. An entire disc, a playlist, a single track, a single chapter, a single title

or a section of the disc between two selected points can be repeated (depen-

dant on the disc type).

1. Repeating an entire disc or playlist²

1/ALL

REPEAT

A-B

1. To repeat an entire disc, press the button “REPEAT 1/ALL” on your remote

control until “All” is displayed in the top left corner of the screen.

VOLUME

2. To repeat a playlist, press the button “REPEAT 1/ALL” until “Program” is

10+

displayed on the screen.

3. To stop the repeat mode, please press again the “REPEAT 1/ALL” button

until no repeat icon is displayed on the screen.

2. Repeating a track, title or chapter²

1. Play the track, title or chapter that you want to repeat. Press the button

“REPEAT 1/ALL” repeatedly until the required repeat mode is displayed in

the top left corner of the screen. This can be “Track” (for Audio CDs and

Video CDs), “Chapter” or “Title” (for DVDs).

2. When the disc reaches the end of the selected track, chapter or title, it will

start playing it again. To stop the repeat mode, press the “REPEAT 1/ALL”

button again until no repeat icon is displayed on the screen.

1. The availability of these features is dependent on the current context (for example, the

mode and the type of disc) and whether they are permitted by the disc.

2. Using this function with Video CDs may require the PBC function to be disabled. To dis-

able PBC, press the “PBC” button.

ENG

PLAYING FUNCTIONS

3. Repeating a section of a disc

A section of a disc can be repeated by defining two points (A->B). This feature

allows you to select where you want the repeat to start and then the section

where you want the repeat to stop.

1. As the disc is playing, press the button “REPEAT A-B” at the beginning of

A-

the section that you want to repeat. “

” will be displayed on the screen.

1/ALL

REPEAT

A-B

2. Press the button “REPEAT A-B” again when the end of the section that you

A-B

want to repeat is reached. “

” will be displayed on the screen.

VOLUME

3. The section is continually repeated now. To stop the repeat of the section,

press again the button “REPEAT A-B” until the repeat icon disappears from

the screen and the disc plays normally.

10+

Note:

You can also stop the section repeating by carrying out any other action that

moves outside the section. For example, skipping trough tracks, pictures, titles

or chapters (see page 33).

Shuffle play

When playing an Audio CD, you can also play the disc in shuffle mode.

1. Please press the button “REPEAT 1/ALL” on your remote control until

1/ALL

“Random” appears on the screen.

REPEAT

A-B

2. To stop the shuffle play, press again the button “REPEAT 1/ALL” until no

repeat icon is displayed on the screen.

VOLUME

Note:

10+

The shuffle function is also available when playing a MP3, JPEG, MPEG, WMA,

MPEG-4 or DivX^®disc. For more details refer to page 42.

Playing a disc at different speeds

(fast forward / fast backward)

1. The function is available to play a disc at different speeds in different direc-

tions. To play the disc at different speeds in a forward direction use the but-

ton “E” on your remote control. The speeds that can be achieved are 2x,

4x, 8x, 16x and 32x.

DVD 4620

PLAY

STOP

ENTER

PAUSE

SLOW

RETURN BOOKMARK

ZOOM

2. To play the disc at different speeds in reverse use the button “G” on your

remote control. The speeds that can be achieved in reverse are 2x, 4x, 8x,

16x and 32x.

HOLD

*Picture of model DVD 4620

3. To change from playing the disc at a different speed to normal speed, press

the Play button “A”.

Notes:

• This function is not available for JPEG pictures.

• Fast forward/reverse scanning will only work during disc playback, not when

the disc is stopped.

• You can also use the buttons “H/G” and “E/F” on the front panel of

the device. In this case hold down this button 3 seconds.

PLAYING FUNCTIONS

Slow play

When a DVD, Video CD, MPEG-4 or DivX^®disc is playing, press the Slow but-

ton “IA” on your remote control to slow down the current speed of play.

PLAY

1. Whenever the Slow button “IA” is pressed once, the speed of play will slow

down by one step, from 1/2>1/4>1/8>1/16. Another pressing of the slow but-

ton “IA” will slow down the speed in reverse range step by step, from

1/2>1/4>1/8>1/16. Pressing the Slow key again will return the play to nor-

mal speed and so on repeat circulating.

STOP

ENTER

PAUSE

RETURN BOOKMARK

ZOOM

SLOW

Note: Video CDs and MPEG-4 or DivX^®discs do not support slow play in

reverse.

2. Pressing the Play button “A” will immediately return to the normal speed

of play.

Problem:

No sound during slow play:

During slow play, the sound will be muted. This is not a fault of your device.

Still the picture frame / Pause a disc

PLAY

STOP

PAUSE

SLOW

1. Pressing the Pause button “I” during play will still the picture frame/ pause

ENTER

the disc.

RETURN BOOKMARK

ZOOM

2. To continue normal play, press the Play button “A”.

Playing a disc frame by frame

1. When a DVD or Video CD is playing, press the Pause button “I” to pause

it.

2. Press the Pause button “I” repeatedly to step from frame to frame.

3. To continue normal play, press the Play button “A”.

ENG

PLAYING FUNCTIONS

PLAY

Zooming in and out of an image

STOP

ENTER

PAUSE

The Zoom feature allows you to enlarge the video image and pan through the

enlarged image. Zooming in and out can be carried out on a DVD, Video CD,

MPEG, MPEG-4 or DivX^®disc whether it is playing or paused.

RETURN BOOKMARK

ZOOM

SLOW

1. To use the zoom facility, press the button “ZOOM” on your remote control.

“2X” is displayed in the top right corner of the screen and you are zoomed

in.

2. Another pressing of the key will zoom further into the picture (3X, 4X).

PLAY

3. When you are zoomed in, you can move around the screen using the direc-

tion buttons. In this way you can move to a part of the screen you would like

to see closer. Pressing the right direction button will move the focus of the

Zoom to the right side, and so on.

STOP

PAUSE

SLOW

ENTER

RETURN BOOKMARK

ZOOM

4. Whenever the “ZOOM” button is now pressed once, the picture size will

reduce to 1/2, 1/3 and 1/4.

5. To zoom completely out, press the button “ZOOM” again and the picture

returns to normal.

Note:

The zoom function is also available when playing a Picture CD. For more

details refer to page 44.

Using position markers (Bookmark)

The bookmark feature allows you to set markers on the disc. When you select

a previously set marker then, the disc will skip to the place marked. For exam-

ple, you may want to mark your favourite scenes in a DVD movie to playback

after the movie is finished. You can store up to 12 bookmark locations, which

are cleared when the disc is removed. To set a marker, please follow these

steps:

1. As a DVD, Video CD or Audio CD is playing, press the button “BOOK-

MARK” on your remote control. A menu will be displayed on the screen.

Note:

Bookmark

You may want to press the Pause button “I” first to freeze playback at the

exact time you wish to set the marker.

TT: 01 CH: 04 Time 0 : 25 : 21

Press ‘ENTER’ key to play

Press ‘C’ key to delete

Press ‘BOOKMARK’ to exit

2. Use the direction keys to select the bookmark that you want to set. This can

be location 1 until 12. In this example, we select location 1.

3. When the point at which you want the marker to be set is reached, press the

button “ENTER”. Details of the selected marker are displayed. If you set the

marker to the wrong point you can delete it by pressing “C” on your remote

control.

4. To jump to a marker that you have set, use the direction buttons to highlight

it and press “ENTER” on your remote control to play it.

5. To exit the bookmark menu, please press the “BOOKMARK” key again.

PLAYING FUNCTIONS

Suspending audio with the “MUTE” button

1. To temporarily cancel the audio of the disc you are listening to or watching,

simply press the “MUTE” button on your remote control. On the screen will

be displayed “Mute” letting you know that the player is in mute mode.

2. Press the button “MUTE” again to resume normal playback with audio. On

the screen will be displayed “Mute off”.

Changing the audio settings

Audio 1/3: Dolby D 5.1CH English

Most DVDs as well as some Video CDs, Audio CDs are recorded with multiple

audio tracks. These can contain multiple languages and different audio formats.

You can change the audio track of the current disc at any point of time.

1. You can switch between the various languages and audio modes on DVDs

with the “AUDIO” button on your remote control. On Video CDs, Audio CDs

you can only change the audio mode.

2. Press the “AUDIO” button while a disc is playing to cycle between the lan-

guages and soundtracks available on the disc. The number of available lan-

guages and soundtracks is depending on the disc.

*DVD display

3. Playback continues in the new audio setting.

Displaying disc information

Various disc and time information can be displayed on-screen by pressing the

button “DISPLAY” on the remote control. In this way you will have quick access

to playback information and important functions that are all grouped together in

one menu.

1. Press the “DISPLAY” button while a disc is playing:

Press the button “DISPLAY” on your remote control to show the display

menu with the disc information.

Note:

• When playing an Audio CD or disc containing MP3, JPEG, MPEG, WMA,

MPEG-4 or DivX^®content, the information will not be shown in an extra

display menu as when playing DVDs and Video CDs. Nevertheless, by

pressing the “DISPLAY” button, different time displays or disc information

can be faded in.

• “Bitrate” means the transferring audio data rate of a disc. Therefore, a

bitrate of 65 is 65,000 bits per second.

2. Navigate with the direction buttons:

Press the “C” and “D” direction keys to move through the menu and press

“ENTER” to enter a menu point. To change the values of a setting, use the

“C” and “D” direction keys again. Confirm your choices with the “ENTER”

key. You can exit the menu at any time by pressing the button “DISPLAY”.

ENG

PLAYING FUNCTIONS

Display menu for DVDs

ᕡ

Title: Indicates the current title and the available titles on the disc. Use the

number keys to enter a title number to jump to.

ᕢ

Title

Chapter

Audio

01/03

07/20

5.1CH English

English

Chapter: Indicates the current chapter and the available chapters on the

disc. Use the number keys to select a chapter to play.

Subtitles

Bitrate 64

Title elapsed 0:29:30

ᕣ Audio: Indicates the audio status. Use the direction keys to select an audio

setting from the available audio tracks on the disc.

ᕤ Subtitles: Indicates the subtitle status. Use the direction keys to select a

Title

01/03

subtitle option from the disc.

Chapter

07/20

Audio

5.1CH English

English

1/1

Subtitle

Angle

ᕥ Angle: Indicates the multi visual angles status. Select between multiple

TT time

CH time

Repeat

Time disp.

1:21:21

0:04:29

Off

angle views. The number of angles depends on the disc.

ᕦ TT time: Indicates the total time of the title currently playing.

Title elapsed

Bitrate 64

Title elapsed 0:29:30

ᕧ CH time: Indicates the total time of the chapter currently playing.

ᕨ Repeat: Indicates the status of the repeat mode. Use the direction keys to

select a repeat option for repeat playback.

ᕩ Time display: Indicates which time display is used. Use the direction keys

to select a time display option, such as the remaining time or the current

playback time.

Display menu for Video CDs

ᕡ Track: Indicates the current track and the available tracks on the disc. Use

the number keys to enter a track number to jump to.

ᕢ Disc time: Indicates the total time of the disc.

Track

02/07

1:05:26

0:02:06

Off

Disc time

Track time

Repeat

ᕣ Track time: Indicates the total time of the track currently playing.

ᕤ Repeat: Indicates the status of the repeat mode. Use the direction keys to

Bitrate 73

Total elapsed 0:01:46

select a repeat option for repeat playback.

ᕥ Time display: Indicates which time display is used. Use the direction keys

to select a time display option, such as the remaining time or the current

playback time.

Track

02/07

Disc time

Track time

Repeat.

1:05:26

0:02:06

Off

Time disp.

Total elapsed

Bitrate 73

Total elapsed 0:01:46

PLAYING FUNCTIONS

Time displays for Audio CDs

• Single elapsed: The time the track has been played until now.

• Single remain: The remaining time of the current track.

• Total elapsed: The total time the disc has been played until now.

• Total remain: The remaining playing time of the disc.

• Display off: There is no time display shown on the screen.

ᕡ

Folder

Single

ᕢ

Disc information for MP3, JPEG, MPEG, WMA and

MPEG-4 or DivX^®files

00:00 00:00

002 025

Off

MIX

ᕡ Shows the selected disc mode, either “Folder” (display of the single folders

MP3

Another day

Start

and files) or “Filelist” (display of all files available on the disc).

Action

Peace on earth

Mysterious way

MP3

ᕢ Shows the current selected play mode. To change the play mode, please

refer to page 42.

ENG

SPECIAL FEATURES FOR DVD’S

Using the DVD menu

A menu that can be used to select what you want to watch or listen to is provid-

ed on many DVDs. There may be, for example, a list of all of the chapters on

the disc or a list of extra items that have been provided such as subtitle and

audio language selection.

DVD menus will sometimes be displayed automatically when starting playback.

Others only appear when pressing the button “MENU” or “TITLE” (depending

on the disc’s design) on your remote control as the disc is playing. If the disc

does not have a menu, the symbol “ ” will be displayed on the screen.

Navigate around the menu using the direction buttons and press the button

“ENTER” to select the highlighted item. Many DVD menus have multiple lay-

ers to navigate through. Exit the menu by following the menu options to resume

playback. You can also use the button “RETURN” to return to the last playing

position, if you accessed the menu during playback.

Displaying subtitles

Pre-recorded DVDs often come with subtitles in several languages. You can

change the subtitle language of the current disc or switch off subtitles at any

time.

You can change the subtitle language either using the menu of the inserted disc

(“MENU” button) or the “SUBTITLE” button on your remote control. The sub-

title languages in the menus may differ.

The number of subtitles that can be changed depends on the content of the

disc. Displaying subtitles can be carried out as described below:

1. During playback, press the button “SUBTITLE” on your remote control. A

message is displayed on the screen indicating the language you have

selected.

Subtitles 01/03: English

2. To change the language that the subtitles are displayed in, press the button

“SUBTITLE” again until the required language is displayed. To turn the sub-

titles off, press the “SUBTITLE” button until “Subtitles off” is displayed on

the screen.

3. Playback continues in the new subtitle language.

SPECIAL FEATURES FOR DVD’S

Changing the camera angle

1/4

If a pre-recorded DVD contains sequences recorded from different camera

angles, you can change the camera angle for playback. You can choose among

the available angles on the disc as described below:

1. During playback, press the button “ANGLE” on your remote control. A mes-

sage is displayed in the top right corner of the screen indicating the angle

you have selected, followed by the total number of angles available.

2. To change the angle, press “ANGLE” again until the required view is dis-

played. The number of angles depends on the content of the disc. The

screen will interchange to the selected angle after 1-2 seconds.

Note:

Most discs with multi angle support will display an indicator or angle mark that

alerts the viewer that multiple angles are available for the current scene.

SPECIAL FEATURES FOR VIDEO CD’S

Using playback control (PBC)

On Video CDs, the playback control option can be used to enable a menu sim-

ilar to the DVD menus. There may be, for example, a list of all chapters on the

disc or a list of extra items that have been provided. Not all Video CDs have

such a menu.

To enable the playback control option, follow these steps:

1. As the disc is playing press the button “PBC” on your remote control until

“PBC on” is displayed on the screen. Select the required track using the

number keys on your remote control.

2. In order to disable the PBC function, please press again the button “PBC”

until “PBC off” is displayed on the screen.

Only Video CDs with playback control can use this playing function. Due to the

differences in the disc design, the operation method may be different. Please

refer to the instructions of each disc.

When the PBC function is activated, pressing the button “RETURN” will skip

back to the previous level of the menu.

ENG

SPECIAL FEATURES FOR MP3, JPEG, MPEG, WMA AND

MPEG-4 OR DIVX^®FILES

When you insert a disc with MP3, JPEG, MPEG, WMA, MPEG-4 or DivX^®files

00:00 00:00

001/ 009

(or mixed), the player will launch an on-screen menu that lets you easily select

and play. The menu gives you several options for playback, including repeat

MIXED HITS

HOLIDAY

and shuffle modes.

ROCK

00:00 00:00

1. Navigating to a file or folder

002 025

JPG

Select the folder that you want to play by pressing the direction keys “C” and

MP3

ANOTHER DAY

“D” and press the button “ENTER”. The files of the corresponding folder will

START

now be shown on the screen. Select the MP3, JPEG, MPEG, WMA, MPEG-4 or

ACTION

FINISH

DivX file that you want to play by pressing again the “C” and “D” keys. To

PEACE ON EARTH

MP3

MYSTERIOUS WAY

MP3

skip to the next file, press the button “F”. To skip to the previous file, press

Resolution 501 X 674

the button “H”.

Note:

2. Playing a file

If you select a JPEG file, the selected

picture will appear in the preview box

on the right side.

Pressing the button “ENTER” will play the selected file or will open the select-

ed folder. To stop the playing of a MP3, MPEG, WMA, MPEG-4 or DivX file,

please press the “J” button on your remote control. To stop playing a JPEG

file, please press the button “MENU” on your remote control.

3. Selecting the play mode

The play mode gives you the option to play a single file or all files, to repeat a

single file or all files, as well as to play the files in random order. Press the but-

ton “REPEAT 1/ALL” on your remote control to select one of the following play

modes:

• Single - Plays only the selected file, then stops.

• Repeat one - Repeats only the selected file; plays the file in a loop.

• Repeat folder - Repeats the selected folder continuously.

• Folder - Plays only the selected folder, then stops.

• Shuffle - Plays the files in a random order continuously.

• Random - Plays the files in a random order once, then stops.

The play mode can be changed by pressing the button “REPEAT 1/ALL” on

your remote control until you reach your desired setting. The current play mode

is shown in the top left corner of the screen and will disappear after a few sec-

onds. To check the status of your play mode, press the button “DISPLAY”. The

tracks of the MP3, JPEG, MPEG, WMA, MPEG-4 or DivX files (or mixed) will

be played according to the selected play mode.

ADDITIONAL FEATURES FOR JPEG FILES

1. Rotation of a picture

9 9

To rotate the picture, press the “B” and “A” buttons on your remote control

after you have selected a JPEG file. In this way, the picture can be rotated in

each direction.

For example: To rotate an image in the clockwise direction, press the direction

key “A” (see pictures on the left).

2. Viewing thumbnails of your JPEG pictures

Thumbnails are smaller sized versions of your JPEG files that allow you to pre-

view many files on a single page. Twelve images are shown on each screen.

1. To make a preview of all pictures, press the “J” button on your remote con-

trol after you have selected a JPEG file. All pictures will now be shown on

the screen.

2. Please press the button “F” to preview more pictures if available. To

return please press the button “H”.

3. Navigate to a picture by pressing the direction keys. If you have selected the

desired picture, press the button “ENTER” or “A” on your remote control

to start playing.

Slide Show

Prev. Next

4. If you are in the preview window mode, you can also select a menu indi-

cating the remote key functions for playing JPEG files. Please navigate with

the direction keys to the field “Menu” and press “ENTER”. A menu will now

be displayed on the screen indicating you all remote key functions.

3. Making a slide show

Start the slide show:

After you have selected a file to view and pressed “ENTER”, the picture will be

displayed on the screen. From here, you can start the slide show mode by

pressing the “J” button, selecting “Slide show” with the direction keys and

pressing “ENTER”. The slide show mode displays all the JPEG files on the disc

in the order they are stored.

Select slide show transitions:

You can choose different types of transitions that will animate the change from

one picture to the next. While the slide show is in progress, press the “PRO-

GRAM” button repeatedly until the required mode is displayed in the top left

corner of the screen. The following transition types are available:

- Wipe top

- Wipe bottom

- Wipe left

- Wipe right

- Extend from center vertical

- Compress to center horizontal

- Compress to center vertical

- Window horizontal

- Diagonal wipe left top

- Diagonal wipe right top

- Diagonal wipe left bottom

- Diagonal wipe right bottom

- Extend from center horizontal

- Window vertical

- Wipe from edge to center

- Move in from top

- None

ENG

ADDITIONAL FEATURES FOR JPEG FILES

4. Zooming in and out

ZOOM 100%

1. Zooming in and out can be carried out on a JPEG picture by pressing the

button “ZOOM” on your remote control. “ZOOM 100%” will be displayed in

the top left corner of the screen.

2. To zoom in please press the button “E”. You can zoom in the picture

125%, 150% and 200%.

3. When you are zoomed in move around the screen using the direction but-

tons.

4. To zoom out please press the button “G” until the required size is reached

ZOOM 50%

(possible are 150%, 125%, 100%, 75% and 50%).

5. To zoom completely out, please press the button “ZOOM” again. In this way

you will reach the normal picture size. You can resume normal viewing at

any time by pressing the “ZOOM” button.

CREATING A PLAYLIST

The playlist facility is available to record a list of tracks, pictures, titles and chap-

ters in the order that you want to play them. A playlist can be created by press-

ing the button “PROGRAM” on your remote control and is available for DVDs,

Video CDs, Audio CDs, MP3, JPEG, MPEG, WMA and MPEG-4 or DivX files.

Note:

The playlist will be cleared from memory once a disc is ejected from the DVD

player.

The control of the playlist of DVDs, Video CDs and Audio CDs may be effected

by pressing the direction keys. There are 20 possible program locations avail-

able. The location numbers indicate the playback order. To delete a pro-

grammed sequence, please press the button “C” on your remote control. To

start the playing of the programmed sequence, please select “Start” with the

direction keys and press “ENTER”. To stop the playing of the playlist, please

press again the button “PROGRAM” and select “Stop”, followed by “ENTER”.

Please note that you are not able to program a new sequence while the pro-

gram is played.

PROGRAM: TT (06) / CH (--)

Creating a playlist of DVDs

Program: TT(06)/CH(--)

1. Press the button “PROGRAM” on your remote control to display the pro-

TT:

CH:

TT:

CH:

gram menu as shown on the left side.

2. Please enter a number by pressing the number keys “0-9” on your remote

control to select the title you want to program. The total number of available

titles is indicated behind the title field [e.g. TT (06)].

Exit

Note:

* DVD display

To add for example title 2 to the playlist, enter 2. To add title 12, press “+10”

and then 2. Or press the button “+10” twice and enter then 2, to play title

22. If your input is invalid, the entered number(s) will be deleted.

3. Please enter now a number to select the chapter of the title you want to pro-

gram. The total number of available chapters is indicated behind the chap-

ter field after you have selected the title.

4. You can now program other titles and chapters in the same way. You may

totally program 20 sequences. Press the button “F” to advance to the next

11-20 program fields, press the button “H” to return back to the first 10.

ENG

CREATING A PLAYLIST

Creating a playlist of Video CDs or Audio CDs

PROGRAM: TT (06) / CH (--)

1. Press the button “PROGRAM” on your remote control to display the pro-

gram menu as shown on the left side.

Program: Track (01-07)

_ _

2. Please enter a number by pressing the number keys “0-9” to select the

track you want to program. The total number of available tracks is indicated

behind the track field [e.g. Track (01-07)].

Note:

Exit

To add for example track 2 to the playlist, enter 2. To add track 12, press

“+10” and then 2. Or press the button “+10” twice and enter then 2, to play

track 22.

3. You can now program other tracks in the same way. You may totally program

20 tracks. Press the button “F” to advance to the next 11-20 program

fields, press the button “H” to return back to the first 10.

Creating a playlist of MP3, JPEG, MPEG, WMA and

MPEG-4 or DivX^®files

00:00 00:00

001 041

1. Press the button “PROGRAM” on your remote control to display all files on

the disc as shown in the menu on the left side. There will be no folder infor-

mation provided on this list. “Filelist” will appear in the bottom left-hand cor-

ner for a few seconds.

ANOTHER DAY

MYSTERIOUS WAY

START

MP3

AKTION

ENDE

PEACE ON EARTH

PRIDE

MP3

2. Navigate to the MP3, JPEG, MPEG, WMA, MPEG-4 or DivX file that you

want to add to your playlist by pressing the “C” and “D” direction buttons.

Filelist

3. Please press “BOOKMARK” to confirm your selection. “Add to playlist”

will appear in the bottom left-hand corner for a few seconds. You can add

other MP3, JPEG, MPEG, WMA, MPEG-4 or DivX files in the same way.

4. Press the button “PROGRAM” again to view the playlist that you have cre-

ated for playback. “Playlist” will appear on the screen for a few seconds.

5. To begin the playback of your playlist, press “ENTER”.

6. To delete a programmed MP3, JPEG, MPEG, WMA, MPEG-4 or DivX file,

please select the file that you want to delete by pressing the buttons “C”

and “D” and press “C” to delete it.

7. To stop the playing of the program, please press the button “J” for MP3,

MPEG, WMA, MPEG-4 or DivX files or “MENU” for JPEG files.

Note:

Please note that the file name can only be displayed with up to 14 letters. More

than 14 letters will be cut in the playlist.

USER PREFERENCES

Your player features an on-screen setup menu that allows you to adjust settings

for your video and audio preferences, and enable player features like parental

lock. When you change settings in the setup menu, they are stored even when

power is turned off. If you wish to return to the factory defaults, they can be eas-

ily reset in the “General setup page”.

Important notes for moving in the setup menu

• The setup menu is divided into the following menus:

Language setup page

Video setup page

Audio setup page

Security setup page

General setup page

• Though the setup menu can be accessed during disc playback, we recom-

mend to press the Stop button “J” twice to have access to all options in the

setup menu.

• Press the button “SETUP” on the remote control to display the setup menu.

The menu appears.

• By pressing the buttons “B” and “A” select the menu that you would like to

set and confirm with “ENTER” or “D”.

• Select the required menu point by pressing the button “C” or “D” and con-

firm with “ENTER” or “A”.

• Select the desired feature with the button “C” or “D”.

• To confirm your selection, please press the button “ENTER”.

• To leave a submenu press the button “ENTER” or “B”. To leave one of the

main menus (e.g. Language setup page) press the button “B”.

• You can leave the menu at any time by pressing the button “SETUP”.

Changing the language settings

Language setup page

Highlight the menu point you would like to set in the “Language setup page”.

Press the button “ENTER” or “A” to enter a menu. Use the button “C” or “D”

to select the required language setting and press “ENTER” to confirm your

selection. You can leave the menu at any time by pressing the button “B” on

your remote control.

OSD language

DVD menu

Audio

Subtitles

DivX subtitles

ENG

Off

Go to language setup page

OSD language

With this setting you can change the language of the on-screen display menus.

You can choose between different languages.

ENG

USER PREFERENCES

DVD menu¹

Sets the language in which the menus provided on the disc are displayed

(dependent on the disc content). If the required language won’t be shown in this

menu, please select the option “Others” and key in the language code of the

required language. Please refer to the language codes below.

Audio¹

Selection of the desired audio language for playback. If the required language

won’t be shown in this menu, please select the option “Others” and key in the

language code of the required language. Please refer to the language codes

below.

Subtitles¹

With this setting you can change the language of the disc subtitles. If the

required language won’t be shown in this menu, please select the option “Oth-

ers” and key in the language code of the required language. Please refer to the

language codes below. If no subtitle display is required, please select “Off”.

Language codes

6565 Afar

7079 Faeroese

7082 French

7089 Frisian

7678 Lingala

8375 Slovak

8376 Slovenian

8377 Samoan

8378 Shona

8379 Somali

8381 Albanian

8382 Serbian

8385 Sundanese

8386 Swedish

8387 Swahili

8465 Tamil

8469 Tegulu

8471 Tajik

8472 Thai

8473 Tigrinya

8475 Turkmen

8476 Tagalog

8479 Tonga

8482 Turkish

8484 Tatar

6566 Abkhazian

6570 Afrikaans

6577 Amharic

6582 Arabic

7679 Laothian

7684 Lithuanian

7686 Latvian/Lettish

7771 Malagasy

7773 Maori

7775 Macedonian

7776 Malayalam

7778 Mongolian

7779 Moldavian

7782 Marathi

7783 Malay

7784 Maltese

7789 Burmese

7865 Nauru

7869 Nepali

7876 Dutch

7879 Norwegian

7982 Oriya

8065 Punjabi

8076 Polish

8083 Pashto/Pushto

8084 Portuguese

8185 Quechua

8277 Rhaeto-Romance

8279 Romanian

8285 Russian

8365 Kinyarwanda

8368 Sanskrit

8372 Serbo-Croatian

8373 Singhalese

7165 Irish

7168 Scots/Gaelic

7176 Galician

7178 Guarani

7185 Gujarati

7265 Hausa

6583 Assamese

6588 Aymara

6590 Azerbaijani

6665 Bashkir

6669 Byelorussian

6671 Bulgarian

6672 Bislama

6678 Bengali

6679 Tibetan

6682 Breton

6765 Catalan

6779 Corsican

6783 Czech

7273 Hindi

7282 Croatian

7285 Hungarian

7289 Armenian

7365 Interlingua

7378 Indonesian

7383 Icelandic

7384 Italian

7387 Hebrew

7465 Japanese

7473 Yiddish

7487 Javanese

7565 Georgian

7575 Kazakh

7576 Greenlandic

7577 Cambodian

7578 Kannada

7579 Korean

7583 Kashmiri

7585 Kurdish

7589 Kirghiz

6789 Welsh

6865 Danish

6869 German

6890 Bhutani

6976 Greek

6978 English

6979 Esperanto

6983 Spanish

6984 Estonian

6985 Basque

7065 Persian

7073 Finnish

7074 Fiji

8487 Twi

8575 Ukrainian

8582 Urdu

8590 Uzbek

8673 Vietnamese

8679 Volapuk

8779 Wolof

8872 Xhosa

8979 Yoruba

9072 Chinese

9085 Zulu

7665 Latin

DivX subtitles

With this setting you can either choose “Western Europe” or “Central

Europe” characters for a correct display of the letters when playing a DivX

disc and selecting subtitles. For the subtitle display, you have to enable the sub-

title feature as described in the menu “Subtitles”.

1. Keep in mind that if the DVD you are using does not support the language you choo-

se, the default of the disc will be used. The default of the disc will also be used, if the

default language of the disc is different to the setting you made in the language menu

of your DVD player. It only works, if the disc has no default setting for the language.

USER PREFERENCES

Changing the video settings

Video setup page

Highlight the menu point you would like to set in the “Video setup page”.

Press the button “ENTER” or “A” to enter a menu. Use the button “C” or “D”

to select the required picture setting and press “ENTER” to confirm your selec-

tion. You can leave the menu at any time by pressing the button “B” on your

remote control.

TV shape

TV type

Video output

Video mode

P-Scan mode

Video quality

PAL

S-Vi

Auto

Go to video setup page

TV shape

*Picture of model DVD 4620

You can setup your player to work with normal and wide screen televisions.

Select one of the following options:

Normal/PS 4:3: When used with a normal TV, the “Normal/PS 4:3” setting

results in the typical “Pan & Scan” display, where a movie is clipped on the

sides to fit on the TV screen.

Normal/LB 4:3: The “Normal/LB 4:3” setting will enable the “Letterbox” format,

where the movie is presented in wide screen format with black lines at the top

and bottom of the screen.

Wide 16:9: If you are using a wide-screen TV, set to the option “Wide 16:9” to

match the aspect ratio of your TV.

Note: The Normal/PS 4:3 and Normal/LB 4:3 settings usually will have no

effect, since very few movies support both options. DVDs are generally record-

ed with either Pan & Scan or Letterbox and do not allow switching between the

two.

TV type

Your player will work with televisions based on the NTSC and PAL standards,

as well as televisions designed to function with both standards. Select one of

the following options:

PAL: Television norm in most European countries, Africa and the Middle East

(from 625 lines only 576 lines will be transferred with a picture changing fre-

quency of 50 half pictures per second).

Multi: The DVD will be played in the original format (multinorm TV necessary).

NTSC: Television norm in USA, Canada, Japan and many other countries (from

525 lines only 480 lines will be transferred with a picture changing frequency of

60 half pictures per second).

Video output

Change this setting to match the type of video input jack you are using on your

TV. Composite Video is the most common video connection type and is sup-

ported on most TVs. If you connect the player over the composite video output

to your TV, normally you don’t need to change the output settings, and your TV

will get displayed.

S-Video: Picture signal, which is splintered according to colour and brightness.

This signal transfer enables a higher sharpness and more low-noise picture

compared to composite picture information, which will only be sent over one

wire.

ENG

USER PREFERENCES

Note:

YUV (only available on model DVD 4620): Transmission of video pictures

with three wires. The colour signals are transferred with a high frequency range.

YUV (Component Video) is used for TVs, computer monitors and projectors

that support three video inputs, each for a colour channel (red, green and blue).

If you select “YUV”, on the screen

will be displayed a warning hint

informing you that incorrectly setting

this item can corrupt the picture. If the

picture becomes distorted or unus-

able, wait a few seconds and the set-

ting will be restored to its previous

value. Follow the instructions on the

screen.

RGB (over SCART): Electrical transmission possibility for video pictures, i.e. it

is a picture signal, which is splintered according to the primary colours of the

TV (red, green and blue).

Video mode (only available on model DVD 4620)

If you are using the component video output, you can change the video mode

setting to enable the Interlace or the Progressive-Scan mode. Do not set to P-

Scan if you are not sure that your TV supports Progressive-Scan.

P-Scan: Progressive-Scan is a method of scanning a complete video frame on

each pass, unlike normal “interlaced” TVs that require two passes to scan each

frame. Progressive-Scan results in a slightly brighter, more stable and flicker

free picture.

Interlace: It’s a process in which the picture is split into two fields by sending

all the odd numbered lines to field one and all the even numbered lines to field

two. This allows a whole picture to be produced in two very fast scans.

Note:

• This setting is only possible, if the Video output is set to “YUV”. This is

because all Progressive-Scan TVs require component video inputs.

• If you select “P-Scan”, a warning hint will be displayed on the screen inform-

ing you that incorrectly setting this item can corrupt the picture. If the picture

becomes distorted or unusable, wait a few seconds and the setting will be

restored to its previous value. Follow the instructions on the screen.

P-Scan mode (only available on model DVD 4620)

Here, you can determine the pulldown mode for the disc you would like to play

in the Progressive-Scan mode.

Auto: This option detects the type of material on the disc being played (film or

video) and switches automatically to the required Progressive-Scan mode. This

mode is suitable for playing discs containing both film and video material.

Film: Select this option for Progressive-Scan with 3:2 pulldown. In this mode

the picture will be scanned in the rhythm 3:2, i. e. the first picture will be repeat-

ed three times, the following picture only two times and so on. This mode is best

suited for playing discs containing film material or video material recorded with

the Progressive-Scan method.

Video: Select this option for Progressive-Scan with 2:2 pulldown. In this mode

the picture will be scanned in the rhythm 2:2, i. e. the first picture will be repeat-

ed two times, the following picture also two times. This mode is best suited for

playing discs containing video material.

Note:

This setting is only possible if you have activated “Progressive-Scan” in the

video mode menu.

USER PREFERENCES

Video quality

Video quality setup

In this menu you can adjust the quality of the picture. You have the following

setup options:

Sharpness

Brightness

Contrast

Gamma

Hue

Saturation

Luma delay

Mid

None

High

Medium

Low

Sharpness: You can adjust the picture sharpness either to high, medium or

low.

0 T

Set the picture sharpness

Brightness: To adjust the intensity of light emitted. The setting range for the

picture brightness is from -20 to +20. Set the brightness with help of the buttons

“B” and “A” and press then “ENTER” to continue.

Contrast: Adjustment of the picture contrast. The contrast is decisive for the

overall display. Light spots should stand out clearly from dark spots without

loosing the strength of the picture. The setting range is from -16 to +16. Set the

contrast with help of the buttons “B” and “A” and press then “ENTER” to con-

tinue.

Gamma: With the gamma value you can affect the linearity of the transition

from the darkest black level to the lightest white level. Select “Gamma” if dark

portions of the picture are too dark or light portions are too light. You can set

the gamma correction to high, medium, low or none.

Hue: Adjustment of the green and red balance. The setting range is from -9 to

+9. Set the hue with help of the buttons “B” and “A”. The higher the controller

is shifted to the right side, the warmer will be the overall display. Contrary, if you

shift the controller to the left side, the picture will get unfriendly and will give you

a sense of coolness. However, there are no clear standard values. Decisive is

alone your personal taste. Press then “ENTER” to continue.

Saturation: To adjust the intensity of the colour in a video picture. The setting

range for the colour saturation is from -9 to+9. Set thesaturationwith helpof the

buttons“B” and “A” and press then “ENTER” to continue. The colours should

be naturally and should not glow exaggeratedly.

Luma delay: The luminance signal represents the brightness in a picture, it can

display each value between black and white. Therefore, the luma delay option

is responsible for the alteration of the black respectively white portion in the pic-

ture, referring to brightness. You can set the luma delay option to 0 T and to 1

T. 0 T is the standard setting with no delay. If you set to 1 T, the luminance sig-

nal will delay 74 ns. The visible effect will be that the picture moves slightly to

the right side.

ENG

USER PREFERENCES

Changing the audio settings

Audio setup page

Highlight the menu point you would like to set in the “Audio setup page”.

Please press “ENTER” or “A” to enter a menu. Use the button “C” or “D” to

select the required audio setting and press “ENTER” to confirm your selection.

You can leave the menu at any time by pressing the button “B” on your remote

control.

Speaker setup

SPDIF setup

Dual mono/DRC

Sound setup

Go to audio setup page

Speaker setup

Audio output

Speaker setup page

Audio output

Post DRC

STR LT/RT

Off

Stereo

Virt. Surround

Since most DVD discs feature Dolby Digital 5.1 channel soundtracks, you will

need to use the downmix options. You have the following setup options:

LT/RT: If you set to LT/RT, a mixed signal of the surround signal will be pro-

duced on the left and right output. The left output signal consists of the front left

signal plus centre and the sum signal of the left and right signal of the surround

speakers. The right output signal consists of the front right signal plus sub-

woofer plus the difference signal of the left and right signal of the surround

speakers. This setting should be used only with Dolby Pro Logic receivers

capable of decoding this signal type.

Set the audio output

Stereo: If you plan to use the stereo analogue outputs for a connection to a TV

or receiver, you must enable this setting to downmix the 5.1 channel sound-

tracks of most DVD movies to a stereo format. If you set to stereo, the left sig-

nal consists of the front left signal plus surround left signal and sum signal of

the centre and subwoofer. The right signal consists of the front right signal plus

surround right signal and sum signal of the centre and subwoofer. This setting

should be used for most televisions and stereo audio equipment.

Virt. Surround: This setting simulates the effect of a 5.1 speaker system by

modifying the signal. With help of a phase shifting, the position of the sound in

the room will be changed so that you get the feeling that there are more than

two speakers in the room. This setting should be used with two speaker sys-

tems.

Post DRC

In this menu you can set the dynamic range for all discs. It’s the difference

between the quietest and loudest sounds in an audio signal. By the compres-

sion of the range, the quieter sounds are audible and the louder ones are not

distorted or too dominant. Big volume jumps will be reduced, if they are annoy-

ing - e.g. late in the evening. You can activate or deactivate the compression or

you can set this option to “Auto”.

USER PREFERENCES

SPDIF setup

SPDIF setup page

SPDIF output

SPDIF (Sony / Philips Digital InterFace) refers to the digital audio format used

by most consumer electronics equipment, as well as the coaxial and optical dig-

ital audio output connectors.

RAW SPDIF off

SPDIF/RAW

SPDIF/PCM

SPDIF output

In this menu you can set the digital output.

Set the SPDIF output

SPDIF off: If you are using the stereo audio outputs, leave SPDIF set to

“SPDIF off”. The digital output is disabled.

SPDIF / RAW: Digital coding of one to six channels (5 plus 1) in a bitstream

(Dolby Digital). If you would like to enjoy the effect of DVD 5.1, please select

the effect “RAW”. Generally, this setting is used with receivers capable of

Dolby Digital 5.1 channel decoding.

SPDIF / PCM: PCM (Pulse Code Modulation). The description of the PCM

sound of DVDs corresponds to the CD system, but with a higher reading rate

(48 kHz, 96 kHz also possible). Alternatively, audio for most films is stored as

discrete, multi-channel surround sound using Dolby Digital audio compression

similar to the digital surround sound formats used in theatres. Generally, this

setting is reserved for two channel equipments.

Dual mono/DRC

Dual mono/DRC setup

The following settings are available in the Dual mono/DRC menu.

Full

3/4

1/2

1/4

Off

Dual mono

Dynamic

STR

Dual mono

Use this setting when playing Audio CDs and Video CDs that offer only mono

audio tracks. There are the following setting options:

Dynamic Range Control

Stereo: Sets the stereo signal.

L-Mono: There will only be output of the left signal on the left and right loud-

speaker.

R-Mono: There will only be output of the right signal on the left and right loud-

speaker.

Mix-Mono: The left and right signal will be mixed and put out mixed on the left

and right loudspeaker.

Dynamic

In this menu you can set the dynamic range for Dolby Digital soundtracks. This

option is sometimes called “midnight mode”. The Dynamic Range Control aims

to make watching a movie at low volumes more enjoyable by boosting the qui-

eter sounds while suppressing the louder sounds. Use the buttons “C” and

“D” to adjust this mode from “Off” to “Full”.

ENG

USER PREFERENCES

Sound setup

Sound setup page

There are the following setting options in the sound setup menu:

Sound preset

Bass boost

Super bass

Treble boost

None None

Off

Rock

Pop

Live

Sound preset: Choose from a variety of sound presets that simulate popular

environments for listening to music. The following modes are available: Rock,

Pop, Live, Dance, Techno, Classic and Soft. If you don’t want to preset the

sound, please select “None”.

Dance

Techno

Classic

Soft

Preset the sound

Bass boost: In this menu you can activate or deactivate the bass boost. Select

the “On” setting to increase the low frequency range from the disc you are play-

ing.

Super bass: In this menu you can activate or deactivate the super bass. Select

the “On” setting to increase the low frequency range further.

Treble boost: In this menu you can activate or deactivate the treble boost.

Select the “On” setting to increase the high frequency range from the disc you

are playing.

Changing the security settings

Security setup page

Highlight the menu point you would like to set in the “Security setup page”.

Please press “ENTER” or “A” to enter a menu. Use the button “D” or “C” to

select the required security setting and press “ENTER” to confirm your selec-

tion. You can leave the menu at any time by pressing the button “B” on your

remote control.

Password

Change PSW

Parental

Off

Go to security setup page

Note:

You must completely stop the player by pressing the Stop button twice to

change the security settings.

Password

In the “Password” menu you can activate or deactivate the password to con-

trol the parental lock. Select “On” to activate the password or “Off” to deacti-

vate it.

Password

You are prompted for a password (as shown on the left side). This of course

makes sense, as this option would be useless if your kids could enter the setup

menu and disable it! You will be prompted to enter the old password. Key in the

password and press “ENTER” to leave this page. If set to “Off” you will not

need to enter a password to make changes to password required settings such

as Parental Control.

Please enter old password

Note:

If you have not yet set an user password, leave the menu by pressing the direc-

tion key “D” and pressing “ENTER”. In this case please refer to the next menu

“Change PSW” to set up a new password.

USER PREFERENCES

Change PSW

In this menu you can create a new password or later change your existing pass-

word. To set the password, please highlight “Change PSW” and press the right

direction button to highlight “Change”. Press then “ENTER” to open the pass-

word page.

Old password

New password

Confirm PSW

When setting up a password the first time, you will be asked to enter the new

password. If you change the password at a later date, you will be asked to enter

the last stored password at first.

Please enter old password

Choose a 4-digit numeric password and write it down in case you forget it. In

order to activate the new password, please leave the setup menu. When press-

ing again the “SETUP” button, the new password is activated.

Note:

If you have forgotten your password, you can enter the default factory password

1389. Please keep in mind that your player may not be secure if this manual is

accessible by your children.

Parental

Your DVD player features a parental control option that can be used to limit

playback of DVDs that exceed the rating you specify. When the parental level

is set, DVDs that are over this level will play only after the correct password has

been entered.

Attention:

This feature has to be supported by the DVD! However, typically only DVD

discs produced by major entertainment companies support parental control.

DVDs not supporting this feature will be “immune” to the lock-out.

Use the buttons “C” and “D” to select the required parental level and press

“ENTER” to confirm your selection. You can choose from 8 levels of parental

control, corresponding to the standard rating system. The lower the value is, the

more strict the limitation. The available levels and their equivalent ratings are

listed below. If no parental control is required, please select “Off”.

1. Kid safe: Suitable for all audiences

2. G: Suitable for general audiences

3. PG: Parental guidance suggested

4. PG 13: Parental guidance suggested, unsuitable for children under 13

5. PG R: Parental guidance recommended - implications or very brief discreet

language or situations

6. R: Restricted - violence, adult language and situation unsuitable for young

viewers

7. NC 17: Adult theme or content, not suitable for children under 17

8. Adults: Adult themes, language and nudity. No parental control.

To activate the set parental level, please leave the setup menu. When pressing

again the “SETUP” button, the parental lock is activated.

Note: If the password is activated (see “Password” menu), any changes in the

parental setup will require to enter a password. The password set up is

explained in the “Change PSW” menu.

ENG

USER PREFERENCES

Changing the general settings

General setup page

Angle mark

Captions

Screen saver

PBC

Memory

Version

Off

Highlight the menu point you would like to set in the “General setup page”.

Please press “ENTER” or the “A” button to enter a menu. Use the button “C”

or “D” to select the required setting and press “ENTER” to confirm your selec-

tion. You can leave the menu at any time by pressing the button “B” on your

remote control.

DivX(R) VOD

Default

Go to general setup page

Angle mark

Here, you can enable or disable the multi-angle display. When used with discs

supporting multi-angle features, the current selected angle will be displayed

continuously on screen, if you select the “On” setting. Setting the angle mark

option to “Off” will cancel continuous display, and the current angle will be dis-

played on-screen for just a few seconds after an angle change. The number of

angles depends on the disc.

Captions

In this menu you can enable or disable the closed captions feature. These are

especially for hearing impaired people. Please note that the DVD has to sup-

port this feature. Furthermore, you need a video subtitle decoder.

Screen saver

In this menu you can enable or disable the screen saver. The screen saver pro-

tects your TV’s cathode-ray tube from “screen burn” that could result from a

static image being displayed for a prolonged period. The screen saver will auto-

matically start within a few minutes of video inactivity, if you select the “On” set-

ting.

PBC

Here, you can enable or disable the playback control option (PBC). On Video

CDs, this option can be used to enable a menu similar to the DVD menus.

There may be, for example, a list of all chapters on the disc or a list of extra

items that have been provided. Only Video CDs with playback control can use

this function.

Memory

This feature allows you to restart a disc from the last place played at a future

time provided the DVD player continues to be in standby mode. If you desire

this feature to be enabled, set this option to “On”. When set to “Off”, discs will

always begin playback at the beginning.

Note:

You can also completely switch off the device by removing the power cord from

the wall socket. If so, please take care to press the button “POWER” on the

remote control or “ON/STANDBY” on the front panel at first in order to make

sure that the memory function is still enabled after switching the device on

again.

USER PREFERENCES

Version

Highlight the menu point “Version”. On the screen will now be displayed the

current firmware version of your DVD player. This may be needed for technical

support.

DivX(R) VOD

The DivX^®VOD registration code can be displayed, if you select the option

“DivX(R) VOD”. For more information, please refer to page 27.

Default

If you would like to return all settings of your DVD player’s setup menu to the

factory defaults, choose “Default - Reset”. This will reset all language, video,

audio and general settings with exception of the parental control and the pass-

word. After all, the parental control and the password features would be of little

use, if your kids could simply clear them with a reset.

ENG

TROUBLESHOOTING

When there is a problem, it does not mean malfunction. Before sending for

repair, please examine your device according to the following:

The player does not power on.

• The AC power cord may be loose or not plugged in. Make sure the power

cord is secure in the AC socket.

The disc tray cannot be closed.

A specific disc does not play.

• The disc may not be properly placed. Please place in the disc again.

• You inserted the wrong disc type.

• The parental control feature is activated. For deactivating the parental con-

trol feature please read section “Password” in chapter “User prefer-

ences” (see page 54).

• The disc may be dirty. Try cleaning the disc.

• Make sure the disc is placed with the labeled side facing up.

• The region code of the disc may not match that of the player. In this case,

the disc cannot be used.

• The disc may not be compliant to an industry standard.

• You have selected or set the wrong channel number on the TV for the DVD

player. Select the correct channel number.

• The cables connecting the TV and the DVD player may be loose. Check the

cables.

The remote control does not work.

• Make sure you are aiming the remote control directly at the player’s remote

control sensor, located on the front of the player.

• There is a technical problem. Take out the battery from the battery compart-

ment, wait for 10 seconds and re-insert it.

• Make sure there are no obstacles between the remote control and the play-

er.

• The battery may be used up. Change the battery in the remote control.

• You could be using the remote control too far away. Try closer.

No picture.

• Make sure the video cables connecting the DVD player to your TV or beam-

er are secure.

• The TV is not set to the DVD/Video mode. Set the TV to the Audio-Video

program (e.g. AV1 or AV2).

The picture appears stretched or • The video aspect ratio may be set wrong for your television type. Enter the

squeezed.

setup menu and select the “Video setup page”. Try changing the “TV

shape” setting to Normal/PS 4:3 (Pan & Scan), if you are using a standard

TV, or “Wide 16:9” if your TV is a wide-screen type. Do not change the TV

shape setting based on the format of a DVD. This setting applies only to the

TV’s aspect ratio.

No sound from TV or speakers.

• The volume is set to minimum. Raise up the volume.

• Make sure the audio cables connecting the DVD player to your speakers, TV

or receiver are secure.

• The sound is muted. Press the “MUTE” button on the remote control to

switch on the sound again.

• The movie is paused. There is no sound during pause or search modes.

• There may be a mistake in the audio setup. Reset to the original settings.

Subtitles are not shown.

• Press the “SUBTITLE” button on the remote control to switch the subtitles

on.

• The subtitle display is only supported on DVDs.

TROUBLESHOOTING

Flickering black-and-white picture.

• Please check if the DVD player is connected to a VCR or a TV/Video-Set. If

so, there will be the Macrovision copyright protection. Please directly con-

nect your device to the TV and not to the VCR.

Ejecting a trapped disc.

• The emergency eject feature allows you to remove a disc from the disc drive

in the very rare case that the tray will not open.

- Disconnect the player from the power supply.

- On the bottom of your player you can see one larger oval opening (please

see the picture on the left side).

- Push the plastics inside the emergency hole with help of a slim and plane

object (e.g. slotted screwdriver) to the left side (about 2 cm; see the arrows

in the picture). The tray will then open.

- Remove the disc from the tray. Close the tray again by hand.

ENG

SPECIFICATIONS*

General specifications

Playable disc types:

DVD, DVD+R, DVD-R, DVD+RW, DVD-RW, DVD+R DL, Audio CD, CD-R,

CD-RW, VCD, SVCD, MP3 CD, MP3 DVD, Kodak Picture CD

Playable disc formats:

MPEG-1/2, MPEG-4, VCD, SVCD, JPEG, MP3, WMA, DivX^®, XviD,

DivX^®VOD

TV systems supported:

Video out formats:

NTSC, PAL, Multi

CVBS, RGB over SCART, S-Video, Component-Video**,

Progressive-Scan**

AC 100~230V, 50/60Hz

6.4W

Power supply:

Power consumption DVD 4010:

Power consumption DVD 4620:

8.5W

Power consumption DVD 4010 (standby): 1.9W

Power consumption DVD 4620 (standby): 3.3W

Standby LED indicator:

Dimensions DVD 4010 (W x H x D):

Dimensions DVD 4620 (W x H x D):

Weight DVD 4010:

Red

226mm × 50mm × 236mm

350mm × 47mm × 250mm

1.425 kg

Weight DVD 4620:

2.075 kg

Operation status:

Horizontal

Operation conditions:

Laser:

5°C to 35°C (41°F to 95°F)

Semiconductor Laser, wavelength 650nm and 790nm

Audio/Video connections

AV connector SCART:

(R) 0.7V (75 ohm), (G) 0.7V (75 ohm), (B) 0.7V (75 ohm),

(H/V sync.) 1.0Vpp (75 ohm)

S-Video out:

Mini DIN 4-pin, (Y) 1.0Vpp (75 ohm), (C) 880mVpp (75 ohm)

One pin jack, 1Vpp (75 ohm)

(Y) 1.0Vpp (75 ohm), (Pb/Pr/Cb/Cr) 0.7Vpp (75 ohm)

Two pin jacks, 2.0Vrms

(SPDIF) IEC 958 for CD-DA / LPCM, IEC 1937 for MPEG 1/2, Dolby Dig-

ital

Composite video out:

Component video out**:

Analogue audio out:

Coaxial digital audio out:

Audio features

D/A converter:

96kHz / 24 bit

Frequency response:

DVD (96kHz): 4Hz to 48kHz

CD/Video CD (44.1kHz): 4Hz to 22kHz

Signal-to-noise ratio DVD 4010:

Signal-to-noise ratio DVD 4620:

Harmonic distortion:

>88.3dB

<0.015%

*Designs and specifications are subject to change without notice. All of the company or product names mentioned in

this manual are the trademarks or registered trademarks of their respective holders.

**Only available on model DVD 4620

GLOSSARY

Bit

Smallest information unit in the EDV as well as in digital transmission systems.

Indication for the height of the resolution in the uncompressed PCM size.

CD-R & CD-RW

Cinch-Audio

Recordable optical disc formats that can be used e. g. as Video CD or MP3 with

your DVD player.

Through the Cinch sockets, the Dolby Digital or MPEG sound will be released

from the DVD as analogue two-channel signal - independent from the channel

number on the DVD.

Cinch-Video

The DVD player sends the composite video signal through the yellow Cinch

socket, either directly to the corresponding socket on the TV or indirectly

through an AV receiver. Cinch is the qualitatively worst picture connection and

should only be used if there is no other option.

Component video

Offers the best interface between a video signal source and a TV/Beamer. Uses

three RCA-type jacks to separate the component signals making up a video sig-

nal. A component video signal is comprised of the luminance (Y) signal and sep-

arate chrominance (CB and CR) signals.

Composite video

Digital output

The most common connection for coloured video pictures that uses a single

RCA cable.

The DVD player releases its sound information bit by bit through the digital out-

put. The way the sound will stream out of the socket must be adjusted in the

OSD menu. Most important criteria: Which device is connected to the digital

socket?

DivX^®

The DivX codec is an MPEG-4 based video compression technology, developed

by DivXNetworks, Inc. It can shrink digital video to small sizes while maintaining

high visual quality. DivX and associated logos are trademarks of DivXNetworks,

Inc. and are used under license.

Dolby Digital

DRM

A digital surround sound system which is able to transfer up to 5 sound chan-

nels plus a sub-bass channel (5.1 or 3/2.01). Developed by Dolby Laboratories.

Digital Rights Management. By means of DRM, it is possible to define what

rights a user acquires to a file (e.g. a video). This is done e.g. in order to pre-

vent illegal duplication.

dts (not supported)

Digital Theatre Systems. Digital surround sound system, which works with 5.1

channels and corresponds to Dolby Digital on the first view. It differs regarding

the data reduction. The DTS system works with higher data rates, i.e lower data

reduction. It transfers about 4 times as much data as the Dolby Digital or MPEG-

2 process and therefore needs appreciable more storage space on the DVD.

Dual-Layer DVD

DVD

A DVD disc that has two layers on a side. A single-sided, dual-layered DVD can

hold almost four hours of video and audio, and is also known as a DVD-9.

Digital Versatile Disc is a storage medium that combines the convenience of the

compact disc with the latest digital video technology. DVD-Video uses modern

MPEG-2 data compression technology that enables an entire film to be stored

on a single five inch disc. DVDs come in different formats, such as single-sided

or double-sided. Each side can have a single layer or two layers of data.

DVD-5

DVD-9

A DVD that is single-sided, single-layered, holding up to 4.7 GBytes of data.

A DVD that is single-sided, dual-layered, holding up to 8.5 GBytes of data.

ENG

GLOSSARY

DVD-10

A DVD that is double-sided and single-layered, which holds up to 9.4 GBytes of

data. This disc must be manually flipped to use both sides.

DVD-18

A DVD that is double-sided, dual-layered, holding up to 17 GBytes of data.

DVD+RW

DVD+ReWritable uses phase change media, the same technology on which

rewritable CDs are based. A high-performance laser is used to change the

reflective properties of the recording layer; this process can be repeated more

than thousand times.

DVD+R

DVD+R (write-once DVD). Unlike a DVD+RW disc, the disc can only be written

to once. If it is not finalised after a recording, further recordings can be added to

it in a DVD recorder. Old recordings can be deleted but can no longer be over-

written. Before this disc can be played in a DVD player, it must be finalised in a

DVD recorder. Once this process is completed, no further recordings can be

added.

DVD+R DL

Interlace

Dual-layer DVD+R disc that expands the storage capacity of the DVD to 8.5 GB.

There can be made recordings with a length of up to four hours in DVD quality

when using this kind of disc.

It is a process in which the picture is split into two fields by sending all the odd

numbered lines to field one and all the even numbered lines to field two. This

allows a whole picture to be produced in two very fast scans.

JPEG

kHz

Joint Photografic Expert Group. File format for pictures with high compression

degree.

Kilohertz. kHz is the indication for the height of the scanning rate with which an

analogue signal (PCM) is interrogated for the following analogue/digital transfor-

mation.

Macrovision

MP3

Analogue copy protection which scrambles the video signal when used with

VHS recorders. Also has an effect on some projectors and monitors.

A compressed audio format. MP3 files recorded on CD-R or CD-RW media are

suitable for playback on your DVD player.

MPEG

Moving Picture Experts Group. Compression method that is used for digital

video records, e.g. for Video CDs or CDs.

MPEG-4

NTSC

Latest compression method standardized by MPEG group with greater com-

pression capabilities.

National Television System Committee, television norm among others in the

USA and Japan (from 525 lines only 480 lines will be transferred with a picture

changing frequency of 60 half pictures per second).

PAL

Phase Alternation Line, television norm in Germany and other European coun-

tries (from 625 lines only 576 lines will be transferred with a picture changing

frequency of 50 half pictures per second).

Pan & Scan

PCM

When used with a normal TV (4:3 aspect ratio), this setting results in the typical

“Pan & Scan” display, where a movie is clipped on the sides to fit on the TV

screen.

Pulse Code Modulation. Linear data stream, which arises from the scanning of

an analogue signal in the same intervals.

GLOSSARY

Progressive-Scan

Is a method of making a computer picture by drawing all the scan lines sequen-

tially from top to bottom resulting in a slightly brighter, more stable and flicker

free picture.

Region code

RGB

DVD movies are produced with region encoding to restrict distribution of titles to

certain areas at certain times. To play back a DVD title with a specific region

code, you will need a DVD player with the same region code.

Electrical transmission possibility for video pictures, i.e. it is a picture signal,

which is splintered according to the primary colours of the TV (red, green and

blue).

SCART socket

S-Video

The SCART socket is the simplest connection between your DVD player and

your TV. It transports not only the picture signals, but also the sound signals.

S-Video offers significantly improved video signal performance through a basic

composite video connection. To use this type of connection, your TV must have

an S-Video input.

SVCD

Super Video CD is a further development of the Video CD. It uses MPEG-2

video compression with a higher and variable data rate.

VCD

Video CD. A digital video disc format that uses MPEG 1 video compression. The

picture quality is roughly that of VHS tapes.

Wide-screen

Transmission of a wide-screen film on video with black bars on top and on bot-

tom.

WMA

YUV

Windows Media Audio is a streaming media format from Microsoft.

The description YUV means the component video signals, i. e. the luminance

(Y) signal and two separate chrominance [B-Y (U), R-Y (V)] signals.

XviD

XviD (aback DivX) is a further development of the “OpenDivX” project created

by DivXNetworks. It should be for free for everybody.

ENG

Intel DX79TO Desktop Motherboard BLKDX79TO User Manual
Internet Security Systems Computer Hardware 3 5 User Manual
Jenn Air Convection Oven WW30430 User Manual
JVC AV 27D502 User Manual
JVC I'Art 0805JGI II IM User Manual
LaCie 500 User Manual
Philips 21AA3547 User Manual
Philips 32PW9309 User Manual
Philips MB4010T001 User Manual
Philips R6RY0 User Manual