HP Hewlett Packard Hewlett Packard Hp Hp Tesla K20 Graphic Card C7S14A User Manual

TESLA K20 GPU ACCELERATOR  
BD-06455-001_v05 | November 2012  
Board Specification  
OVERVIEW  
®
®
The NVIDIA Tesla K20 graphics processing unit (GPU) accelerator is a PCI Express,  
dual-slot full height (4.376 inches by 10.5 inches by 1.52 inches) form factor computing  
module comprising of a single GK110 GPU. The Tesla K20 is designed for servers and  
offers a total of 5 GB of GDDR5 on-board memory and supports PCI Express Gen2.  
The Tesla K20 can be configured by the OEM or by the end user to enable or disable  
ECC or error correcting codes that can fix single-bit errors and detect double-bit errors.  
Enabling ECC will cause some of the memory to be used for the ECC bits, so the user  
available memory will decrease by 10%. On the Tesla K20, the register files, cache, and  
DRAM are ECC protected.  
KEY FEATURES  
GPU  
Number of processor cores: 2496  
Processor core clock: 706 MHz  
Package size: 45 mm × 45 mm 2397-pin ball grid array (S-FCBGA)  
Board  
PCI Express Gen2 ×16 system interface  
Physical dimensions: 4.376 inches × 10.5 inches, dual-slot  
Display Connectors  
None  
Tesla K20 GPU Accelerator  
BD-06455-001_v05 | 1  
   
Overview  
Power Connectors  
One 6-pin PCI Express power connector  
One 8-pin PCI Express power connector  
Memory  
Memory clock: 2.6 GHz  
Memory bandwidth: 208 GB/sec  
Interface: 320-bit  
Total board memory: 5 GB  
20 pieces of 64M × 16 GDDR5, SDRAM  
BIOS  
2Mbit Serial ROM  
TESLA K20 BLOCK DIAGRAM  
Figure 1 is the block diagram for the Tesla K20 GPU dual-slot computing processor  
module.  
Figure 1.  
Tesla K20 Block Diagram  
Tesla K20 GPU Accelerator  
BD-06455-001_v05 | 2  
   
Overview  
CONFIGURATION  
The Tesla K20 board is available in the following configuration (Table 1).  
Table 1.  
Board Configuration  
Specifications  
Tesla K20  
Generic SKU reference  
Chip  
699-22081-0208-xxxx  
GK110  
Package size GPU  
Processor clock  
Memory clock  
45 mm × 45 mm 2397-pin S-FCBGA  
706 MHz  
2.6 GHz  
Memory size  
5 GB  
Memory I/O  
320-bit GDDR5  
Memory configuration  
Display connectors  
Power connectors  
20 pieces of 64M ×16 GDDR5 SDRAM  
None  
8-pin PCI Express power connector  
6-pin PCI Express power connector  
Board power  
225 W  
Idle power  
25 W  
Thermal cooling solution  
Passive heat sink  
Tesla K20 GPU Accelerator  
BD-06455-001_v05 | 3  
   
MECHANICAL SPECIFICATIONS  
PCI EXPRESS SYSTEM  
The Tesla K20 board (Figure 2) conforms to the PCI Express full height (4.376 inches by  
10.5 inches) form factor.  
10.5 inches  
4.376 inches  
Figure 2.  
Tesla K20 GPU Accelerator  
Note: The final product will ship with shroud.  
Tesla K20 GPU Accelerator  
BD-06455-001_v05 | 4  
     
Mechanical Specifications  
TESLA K20 BRACKET  
As shown in Figure 3, the Tesla K20 includes a vented bracket. If you are an OEM who  
qualifies for bracket modifications, you have the option of receiving your module with  
no bracket installed.  
Figure 3.  
Tesla K20 Bracket  
Tesla K20 GPU Accelerator  
BD-06455-001_v05 | 5  
   
Mechanical Specifications  
POWER CONNECTORS  
The Tesla K20 GPU accelerator is a performance optimized, high-end product and uses  
power from the PCI Express connector as well as external power connectors.  
Figure 4 and Figure 5 show the specifications and Table 2 and Table 3 show the pinouts  
for the 6-pin and 8-pin PCI Express power connectors.  
Figure 4.  
6-Pin PCI Express Power Connector  
Tesla K20 GPU Accelerator  
BD-06455-001_v05 | 6  
   
Mechanical Specifications  
Figure 5.  
8-Pin PCI Express Power Connector  
Tesla K20 GPU Accelerator  
BD-06455-001_v05 | 7  
 
Mechanical Specifications  
Table 2.  
6-Pin PCI Express Power Connector Pinout  
Pin Number  
Description  
+12 V  
1
2
3
4
5
6
+12 V  
+12 V  
GND  
Sense  
GND  
Table 3.  
8-Pin PCI Express Power Connector Pinout  
Pin Number  
Description  
+12 V  
1
2
3
4
5
6
7
8
+12 V  
+12 V  
Sense1  
GND  
Sense0  
GND  
GND  
Tesla K20 GPU Accelerator  
BD-06455-001_v05 | 8  
   
POWER SPECIFICATIONS  
The Tesla K20 GPU accelerator requires power from the PCI Express connector as well  
as one or two auxiliary power connectors.  
Table 4.  
Auxiliary Power Connectors  
8-Pin Header  
6-Pin Header  
Support  
Yes  
Notes  
Connect 8-pin cable  
Connect 8-pin cable  
Connect 6-pin cable  
No cable installed  
Yes  
8-pin cable must supply  
150 W  
Connect 6-pin cable  
Connect 6-pin cable  
No  
8-pin connector should  
always be connected  
Note: Detailed information about power draw by rail will be available to  
authorized system partners in the Tesla K20 System Design Guide.  
Tesla K20 GPU Accelerator  
BD-06455-001_v05 | 9  
   
SUPPORT INFORMATION  
CERTIFICATES AND AGENCIES  
Agencies  
Australian Communications Authority and Radio Spectrum Management Group of  
New Zealand (C-Tick)  
Bureau of Standards, Metrology, and Inspection (BSMI)  
Conformité Européenne (CE)  
Federal Communications Commission (FCC)  
Industry Canada - Interference-Causing Equipment Standard (ICES)  
Korean Communications Commission (KCC)  
Underwriters Laboratories (cUL)  
Voluntary Control Council for Interference (VCCI)  
Tesla K20 GPU Accelerator  
BD-06455-001_v05 | 10  
     
Support Information  
LANGUAGES  
Table 5.  
Languages Supported  
Windows Server  
2008 and Windows  
Server 2008 R2  
Linux  
English (US)  
English (UK)  
Arabic  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
x
X
Chinese, Simplified  
Chinese, Traditional  
Danish  
Dutch  
Finnish  
French  
French (Canada)  
German  
Italian  
Japanese  
Korean  
Norwegian  
Portuguese (Brazil)  
Russian  
X
X
X
X
X
X
Spanish  
Spanish (Latin America)  
Swedish  
Thai  
Note: NVIDIA’s CUDA™ software is only supported in English (U.S.)  
Tesla K20 GPU Accelerator  
BD-06455-001_v05 | 11  
   
Notice  
ALL NVIDIA DESIGN SPECIFICATIONS, REFERENCE BOARDS, FILES, DRAWINGS, DIAGNOSTICS, LISTS, AND OTHER  
DOCUMENTS (TOGETHER AND SEPARATELY, “MATERIALS”) ARE BEING PROVIDED “AS IS.” NVIDIA MAKES NO  
WARRANTIES, EXPRESSED, IMPLIED, STATUTORY, OR OTHERWISE WITH RESPECT TO THE MATERIALS, AND  
EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR  
A PARTICULAR PURPOSE.  
Information furnished is believed to be accurate and reliable. However, NVIDIA Corporation assumes no  
responsibility for the consequences of use of such information or for any infringement of patents or other  
rights of third parties that may result from its use. No license is granted by implication of otherwise under  
any patent rights of NVIDIA Corporation. Specifications mentioned in this publication are subject to change  
without notice. This publication supersedes and replaces all other information previously supplied. NVIDIA  
Corporation products are not authorized as critical components in life support devices or systems without  
express written approval of NVIDIA Corporation.  
Trademarks  
NVIDIA, the NVIDIA logo, CUDA, and Tesla are trademarks and/or registered trademarks of NVIDIA Corporation  
in the U.S. and other countries. Other company and product names may be trademarks of the respective  
companies with which they are associated.  
Copyright  
© 2012 NVIDIA Corporation. All rights reserved.  

HP Hewlett Packard LV1561X User Manual
Hanns G HH221HPB User Manual
Electrolux Thermaline WLXRAAOOOO User Manual
DeLonghi Cooktop DE302GB User Manual
Dell Computer Monitor E1909W User Manual
Cypress CY7C1516AV18 User Manual
Corsair H50 User Manual
Bosch Appliances 98 User Manual
Asus P5ND2 SE User Manual
Abit IS7 E2G User Manual