HP D2832A
HP M500
15-inch Color Monitor
13.8-inch Viewable Image
User’s Guide
15-Zoll-Farbbildschirme
13.8 Zoll Bildanzeige
Benutzerhandbuch
Moniteurs couleur 15 pouces
Affichage 13,8 pouces
Guide de l’utilisateur
Pantallas de color de 15 pulgadas
13.8 pulgadas de imagen visualizada
Manual del Usuario Léase esto primero
Video a colori da 15 pollici
13.8 effetivi per l’immagine
Manuale utente
Notice
The information contained in this document is subject to change without notice.
Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose.
Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the
furnishing, performance, or use of this material.
Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Hewlett-
Packard.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document
may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company.
Hinweis
Inhaltliche Änderungen vorbehalten.
Hewlett-Packard übernimmt keine Garantie welcher Art auch immer für diese Ausrüstung, einschließlich der (doch nicht begrenzt
auf die) Qualitätsgarantie und die Garantie bezüglich Eignung für einen bestimmten Zweck.
Hewlett-Packard haftet nicht für in dieser Dokumentation enthaltene Fehler oder für unbeabsichtigte oder indirekte Schäden in
Verbindung mit der Lieferung, der Leistung oder der Benutzung der Ausrüstung.
Hewlett-Packard übernimmt keine Haftung fur den Betrieb oder die Zuverlässigkeit seiner Software, wenn diese auf Hardware
benutzt wird, die nicht von Hewlett-Packard geliefert wurde.
Dieses Dokument enthalt proprietäre Informationen, die durch das Copyright geschützt sind. Alle Rechte vorbehalten. Dieses
Dokument darf ohne vorherige schriftliche Genehmigung der Hewlett-Packard Company weder ganz noch teilweise fotokopiert,
reproduziert oder übersetzt werden.
Avertissement
Les informations contenues dans ce document peuvent être modifiées sans préavis.
Hewlett-Packard ne donne aucune garantie de quelque sorte que ce soit concernant, sans que ce soit limitatif, les garanties
implicites de qualité commerciale de ce matériel, ou la bonne adaptation de celui-ci à un usage particulier.
Hewlett-Packard n’est pas responsable des erreurs pouvant apparaître dans ce manuel et n’est pas non plus responsable des
dommages directs ou indirects résultant de l’équipement, des performances et de l’utilisation de ce matériel.
Hewlett-Packard ne saurait être tenu pour responsable de l’utilisation et de la fiabilité de son logiciel sur des matériels non fournis
par Hewlett-Packard.
Les informations contenues dans ce document sont originales et protégées par copyright. Tous droits réservés. L’acheteur s’interdit
en conséquence de les photocopier, de les reproduire ou de les traduire dans toute autre langue, sauf accord préalable et écrit de
Hewlett-Packard.
Aviso
La información contenida en este documento está sujeta a cambios sin previo aviso.
Hewlett-Packard no ofrece ningún tipo de garantía con respecto a este material, incluyendo, pero sin limitarse a, las garantías
implícitas de comerciabilidad e idoneidad para un fin determinado.
Hewlett-Packard no asume responsabilidad alguna por los posibles errores contenidos o por los daños casuales o emergentes
relacionados con el suministro, funcionamiento o uso de este material.
Hewlett-Packard no asume responsabilidad alguna por el uso o fiabilidad de su software en equipos que no hayan sido fabricados
por Hewlett-Packard.
Este documento contiene información patentada, protegida por las leyes del copyright. Reservados todos los derechos. Ninguna
parte de este documento puede ser fotocopiada, reproducida o traducida a otro idioma sin la autorización previa y por escrito de
Hewlett-Packard Company.
Avviso
Le informazioni contenute in questo documento sono soggette a cambiamento senza preavviso.
Hewlett-Packard non rilascia garanzie di alcun tipo riguardo a questo materiale, comprese le garanzie implicite di commerciabilità
e di idoneità per uno scopo particolare.
Hewlett-Packard non sarà ritenuta responsabile per errori contenuti in questo documento, né per danni accidentali o conseguenti
alla fornitura, alle prestazioni o all’uso di questo materiale.
Hewlett-Packard non si assume alcuna responsabilità riguardo all’uso o all’affidabilità del proprio software su apparecchiature di
altri produttori.
Questo documento contiene informazioni di proprietà protette da copyright. Tutti i diritti sono riservati. Nessuna parte di questo
documento può essere fotocopiata, riprodotta o tradotta in un’altra lingua senza un precedente consenso scritto di Hewlett-Packard
Company.
Hewlett-Packard France
38053 Grenoble Cedex 9
France
© 1998 Hewlett-Packard Company
Francais
1
0.28 mm dot pitch for
excellent graphics
Anti-glare, anti-static,
screen coating
Full scan screen that gives
an edge to edge image
Optional USB-Hub (Universal
Serial Bus-Hub)
On/Off switch
Status indicator
Controls for brightness, contrast, image
position, and image geometry.
HP M500
15-inch Color Monitor
13.8-inch Viewable Image
User’s Guide
HP M500 15” Color Monitor User’s Guide
Important Safety Instructions
Important Safety Instructions
Before you plug in your new monitor, read these important safety
instructions.
WARNING
Connect the monitor only to a grounded power outlet. Use the power
cord supplied with the monitor or one with a properly grounded plug.
Ensure the cable meets your country’s standards for safety.
To completely disconnect power at the monitor, remove the power
cord from the power outlet. Ensure that the power outlet is easily
accessible.
Make sure the power to your computer is “off” before connecting or
disconnecting any monitor peripheral.
To reduce the risk of electric shock, do not remove cover(or back).
There are no user servicable parts inside. Refer servicing to qualified
service personnel.
The monitor is quite heavy(the weight is shown in the technical
specifications). We recommend you ask the assistance of a second
person when lifting or moving it.
USA and Canada
If the power cord is not supplied with your monitor, select the proper
power cord according to your national electric safety codes.
• USA: use a UL Listed Type SVT or Type SJT detachable power cord.
• Canada: use a CSA certified detachable power cord.
Si le cordon secteur n’est pas livré avec votre moniteur, utiliser un
cordon secteur en accord avec votre code électrique national.
•
USA: utiliser un cordon secteur UL Listé de type SVT ou SJT.
• Canada: utiliser un cordon secteur certifié CSA.
2 English
HP M500 15” Color Monitor User’s Guide
What Your New Monitor Offers
What Your New Monitor Offers
Your HP monitor is a 15-inch (13.8-inch viewable image), high resolution,
multi-synchronous color monitor. Multi-synchronous means that the
monitor supports a range of video modes. It is optimized to be used with all
Hewlett-Packard PCs.
Your HP color monitor has the following features:
•
A 15-inch flat square tube, with a 13.8-inch viewable image, and
0.28 mm dot pitch for excellent graphics.
•
Anti-glare, multilayer coating to minimize reflection.
• Support of video modes up to Ultra VGA 1024×768 at a 85Hz refresh
rate, and up to Ultra VGA 1280×1024 using a 60 Hz refresh rate.
• Image adjustment using on screen display menus. Includes color
adjustment and image rotation controls to optimize the quality and
position of the image.
1
•
Monitor power management system (VESA standard) controlled from
suitably equipped HP PCs to automatically reduce the power
consumption of the monitor. Complies with the Energy Star Computers
2
Program initiated by the US EPA . As an Energy Star Partner, Hewlett
Packard has determined that this product meets the Energy Star
guidelines for energy efficiency.3
• Plug and Play capability (VESA DDC1/2B standard) that enables the
monitor to identify itself to suitably equipped HP PCs.
• Compliance with ISO 9241-3, ISO 9241-8 and ZH-1/618 ergonomic
standards.
• Complies with MPRII guidelines for upper limits of electrical and
electrostatic emissions, from the Swedish National Board for
Measurement and Testing. Your HP D2832A monitor complies with
the Swedish standard MPR III, level B, for electric and magnetic field
emission.
1.
2.
3.
VESA is the Video Electronics Standards Association
The US EPA is the United States Environmental Protection Agency
ENERGY STAR is a US registered service mark of the US EPA.
English 3
HP M500 15” Color Monitor User’s Guide
What Your New Monitor Offers
• Your HP D2832A monitor is certified to TCO95.1
• Your monitor can be upgraded with a USB-Hub (Universal Serial
Bus- Hub). This is plugged into the back of your monitors base and
allows you to connect up to 4 USB devices (refer to note below).
NOTE
This USB option may not be available in all countries. Please contact
your HP representative for further information.
1.
Swedish Confederation of professional Employees.
4 English
HP M500 15” Color Monitor User’s Guide
Setting Up Your Monitor
Setting Up Your Monitor
Attaching the Tilt and Swivel Base
Your display has a tilt and swivel base. To fit and tilt the swivel base:
1 Turn the display on its side (never on the screen). Identify the front
of the base.
2 Locate the slots in the underside of the display.
3 Slide the base towards the front of the display until the locking tab
on the base clicks into place.
1
2
3
Where to Place the Monitor
Place your monitor on a flat sturdy surface.
Ensure the operating site is free from excessive heat, moisture, dust
and sources of electromagnetic fields. Sources of electromagnetic
fields include transformers, motors, and other monitors.
Avoid exposing the monitor to direct sunlight.
English 5
HP M500 15” Color Monitor User’s Guide
Setting Up Your Monitor
Connecting the Cables
CAUTION
Before you connect any cables, or install your HP monitor, refer to the
safety instructions at the beginning of this manual. Refer to the user
manual which accompanies your PC and video adapter to ensure this
equipment is correctly installed.
1 Make sure that your PC and monitor are switched off.
2 Connect the video cable (it has a 15-pin plug) to the video outlet on
your PC. Tighten the thumbscrews on the plug.
3 Connect the power cord to the monitor.
4 Plug the power cord into the grounded power outlet.
1 PC and Monitor OFF
2
Video cable
3
Power cords
4
NOTE
The location of your PC’s video outlet may be different to the one shown
in the diagram. Refer to the manual that came with your PC, if
necessary.
6 English
HP M500 15” Color Monitor User’s Guide
Using Your Monitor
Using Your Monitor
The ON /OFF switch
is on the front of the monitor.
You can adjust the quality, position, size, shape and color of the
displayed image using the controls on the front of the monitor to
operate on screen menus.
ON/OFF Button
etc
Adjustment Controls
Pressing the Enter or Exit button activates the monitor’s on screen main
menu.
To select a feature, use the
and
adjustment controls to scroll
to the adjustment feature you require and press Enter to access it’s
menu.
Reset to Default
Language Select
To revert to preset factory settings, select
then press Enter.
from the main menu,
Adjusting the Language of Your On Screen Display
etc
ABC
To set the language of your on screen display, select
from the main
ABC
menu, and
from the submenu that appears. Use the and
adjustment controls to select a language and press Exit to save your
adjustments.
English 7
HP M500 15” Color Monitor User’s Guide
Using Your Monitor
Adjusting the Quality of the Displayed Image
Adjustments to the quality of the displayed image can be made from a
submenu. To access this submenu, select
from the main menu.
Contrast
To adjust the contrast, select this feature from the submenu, then
adjust the contrast using the and adjustment controls. Press
Exit to save your adjustments. (Contrast is the difference in brightness
between the dark and light parts of the displayed image)
Brightness
To adjust the overall picture brightness, select this feature from the
submenu, then adjust the brightness using the
and
adjustment controls. Press Exit to save your adjustments. (The
brightness should be set so that the dark areas of the displayed image
remain black)
NOTE
You can access the contrast and brightness directly using the
controls respectively. Adjust the quality using the and
and
adjustment controls as required. Press Exit to save your adjustments.
Degauss
To degauss the monitor, select this feature from the main menu, then
press Enter. Degaussing keeps the monitor free from unwanted
magnetism that can result in color impurity. It is recommended that you
degauss at least every week. Degaussing is accompanied by brief
instability of the displayed image and a slight humming sound.
Adjusting the Size, Position, and Shape of the Displayed Image
Adjustments to the size, position, and shape of the displayed image can
be made from a submenu. To access this submenu menu, select
from the main menu.
Hor. Size
To adjust the horizontal size of the displayed image, select
this submenu, then use the and adjustment controls to resize.
Press Exit to save your adjustments.
from
Hor. Position
To adjust the horizontal position of the displayed image, select
from this submenu, then use the
adjustment controls to locate
the image. Press Exit to save your adjustments.
8 English
HP M500 15” Color Monitor User’s Guide
Using Your Monitor
Ver. Size
To adjust the vertical size of the displayed image, select
submenu, then use the and adjustment controls to resize.
Press Exit to save your adjustments.
from this
Ver. Position
Trapezoid
To adjust the vertical position of the displayed image, select
from
this submenu, then use the
and
adjustment controls to locate
the image. Press Exit to save your adjustments.
To adjust the displayed image if its vertical edges do not appear parallel,
select
from this submenu and use the
and
adjustment
controls to correct the distortion. Press Exit to save to your adjustments.
Pincushion
Unbalance
Parallelogram
To adjust the displayed image if its vertical edges appear to bow in or
out, select
from this submenu and reshape using the
and
adjustment controls. Press Exit to save your adjustments.
To adjust the displayed image if its edges appear to bow left or right,
select from this submenu and reshape using the and
adjustment controls. Press Exit to save your adjustments.
To adjust the displayed image if the edges appear to tilt to the left or
right, select from this submenu and use the and
adjustment controls to correct the distortion. Press Exit to save your
adjustments.
Rotation
Depending on the orientation of your monitor, for example, whether it
faces north or south, you may experience some rotation of the image.
This effect is due to the influence of the earth’s magnetic field and is
normal for all monitors. To adjust the displayed image if it appears to be
rotated, select
from the menu and use the
and
adjustment controls to re-orient the image.
English 9
HP M500 15” Color Monitor User’s Guide
Using Your Monitor
Adjusting the Color of the Displayed Image
Adjustments to the color of the displayed image can be made from a
submenu. To access this submenu, select
from the main menu.
Your monitor displays a combination of red, blue, and green to show a
full color image. If you want to change the proportions of red, blue, and
green used by your monitor you will need to change the color
temperature.
To Select a Preset Color Temperature
Your monitor is shipped with five preset color temperatures: 9300K,
6500K, 5500K, 7100K, and 11500K.
Color Adjustment
Use the
and
adjustment controls to select a color temperature.
Press Exit to save your selection.
Adjusting the Color Temperature Setting
You can adjust the color temperature settings. To adjust the these
settings press Enter from the Color Temperature Adjustment menu.
Select Red, Green, or Blue using the
and
adjustment
controls, then use these controls again to adjust the color level. Press
Exit to save your adjustments.
NOTE
You can restore the factory preset color temperature settings by
selecting the
icon and pressing Enter to save this selection.
Adjusting the Position of your On Screen Menu
etc
OSD position
To set the position of your on screen menu, select
from the main
and
menu, and from the submenu that appears. Use the
adjustment controls to select either horizontal or vertical adjustment,
then use these controls again to move the on screen menu. Press Exit to
save your adjustments.
10 English
HP M500 15” Color Monitor User’s Guide
Using Your Monitor
Setting the Amount of Displayed Information
To set the amount of displayed information, change the screen
resolution of your PC. The higher the screen resolution, the more
information you can see on the screen. It is recommended that you use
a resolution of 1024×768 at 85Hz. This gives easy-to-read characters, a
large amount of displayed information, and a flicker-free image.
You can make adjustments to the displayed image and they are
automatically saved for the resolution you are using. For example, if
you adjust your monitor when working in SVGA those settings are
saved for SVGA. If you then work in VGA and change the image
settings, they are saved for VGA. The next time you switch back to
SVGA, your previous settings are used automatically.
To find out which resolutions are supported by your monitor, refer to
“What Video Modes are Supported” on page 13. To change the screen
resolution, please refer to the manual that came with your PC or your
operating system documentation, if necessary.
Your monitor has a Plug and Play capability (VESA DDC1/2B standard)
that enables it to identify itself to suitably equipped HP PCs. This will
automatically give you the best refresh rate for the resolution that you
have set. Also, by using the appropriate software (when available), you
can adjust the monitor settings directly from your PC.
Minimizing Eye Strain
To avoid screen flicker and minimize eye strain, use the highest
supported image refresh rate for the chosen resolution. The image
refresh rate is the number of times per second that the image is
refreshed. It is recommended that you use a resolution of 1024×768 at
85Hz refresh rate.
To find out which image refresh rates are supported by your monitor,
refer to “What Video Modes are Supported” on page 13. To set the
image refresh rate (also known as the vertical frequency), refer to the
manual that came with your PC or your operating system
documentation, if necessary. If your PC supports Plug and Play, it will
automatically select the best refresh rate for the screen resolution you
have set.
English 11
HP M500 15” Color Monitor User’s Guide
Using Your Monitor
Minimizing Energy Consumption
Your monitor has energy saving capabilities. Depending on your PC and
operating system, your monitor will be able to enter the following
modes:
• Sleep mode (DPMS Standby mode). This mode uses less than 15W.
In this mode the screen blanks and the monitor’s front panel
indicator light is constant amber. The monitor remains active but no
image is displayed. Move your mouse or press a key to instantly
restore the monitors image.
• Suspend mode (ACPI state D2). This mode uses less than 15W. In
this mode the screen blanks and the monitor’s front panel indicator
light is constant amber. To reactivate the screen, move your mouse
or press a key on your keyboard. The monitor will restore the image
after a few seconds.
• Off mode(On Now Soft Mode). This mode uses less than 5W. The
screen blanks and the monitor’s front panel indicator light blinks
rapidly in amber.
To set these power saving modes, refer to the manual that came with
your PC. If your screen is not displaying an image, check the front
panel indicator light first — your monitor may be in a power saving
mode.
12 English
HP M500 15” Color Monitor User’s Guide
What Video Modes are Supported
What Video Modes are Supported
Your monitor supports the video modes shown in the table below.
Screen Resolution
Image Refresh Rate
Video Solution
640×400
640×480
640×480
640×480
800×600
800×600
800×600
1024×768
1024×768
1024×768
1280×1024
70 Hz
60 Hz
75 Hz
85 Hz
72 Hz
75 Hz
85 Hz
70 Hz
75 Hz
85 Hz
60 Hz
VGA
VGA
VGA
VGA
Super VGA
Ergonomic Super VGA
Super VGA
Ultra VGA 1024
Ultra VGA 1024
Ultra VGA 1024
Ultra VGA 1280
CAUTION
Selecting a video mode on your PC with a screen resolution/image
refresh rate combination higher than 1280×1024 at 60Hz can damage
your monitor.
English 13
HP M500 15” Color Monitor User’s Guide
Technical Specifications
Technical Specifications
Size
15-inch flat screen/ 13.8-inch viewable image
Red, Green, Blue short persistence
0.28 mm
Phosphorous
Dot pitch
PICTURE TUBE
Face Plate
Video
Anti-glare, multi-layer coating, anti-static
0.7 Vp p analog RGB, no setup
Separated H/V (TTL), H/V mixed (TTL level)
15-pin mini D-SUB
INPUT SIGNAL
INTERFACE
Synchronization
Input Connector
Horizontal
30 to 70kHz
50 to 120 Hz
SCANNING FREQUENCY
Vertical
1280 × 1024 (60Hz)
MAX. RESOLUTION (H×V)
WARM-UP TIME
30 minutes to reach optimum performance level
110 MHz
PIXEL CLOCK
Diagonal: 351mm(13.8-inch)
Maximum Size: 283(W) × 212(H)mm
IMAGE SIZE
AC 90 to 264 V, 47 to 63 Hz
ON 75W (max)
POWER SOURCE
Sleep Mode (DPMS Standby) 15 W (max)
Suspend Mode (ACPI state D2) 15W (max)
Off Mode (On Now Soft Mode) 5W(max)
Temperature
0 °C to 40 °C (operating)
- 25°C to +65 °C (storage)
OPERATING ENVIRONMENT
Humidity
10% RH through 80% RH (without condensation)
376(W) × 373(H) × 385(D) mm
CABINET DIMENSIONS
WEIGHT
12.5 kg
Tilt Angle
- 5° to +15°
TILT/SWIVEL STAND
Swivel Angle
±45°
14 English
HP M500 15” Color Monitor User’s Guide
Care and Cleaning
Care and Cleaning
Do not place anything on top of the monitor. Doing so may block the
monitor vents and cause damage to the monitor due to overheating.
Do not let liquid get on or into the monitor.
To maximize screen life and prevent damage to the picture tube (such
as burned phosphor due to leaving the same image on the screen for a
long time), it is recommended that you:
• Use the monitor power management system (on HP PCs) or a screen
saver program.
• Avoid setting contrast and brightness to their maximum levels for
prolonged periods.
• If you do not have a power management system or a screen saver
program, switch the monitor off or reduce the brightness and
contrast to minimum levels when the monitor is not in use.
Your monitor has an anti-glare, anti-static screen coating. To prevent
damage to the monitor screen’s coating, use a regular household glass
cleaner when cleaning the screen. To clean the screen:
1 Switch the monitor off and remove the power plug (pull the plug, not
the cable).
2 Wet a soft cotton cloth with the cleaning solution and gently wipe the
screen. Do not spray cleaner onto the screen because the cleaner
may drip inside the monitor.
3 Dry with a clean, soft cotton cloth.
Do not use cleaning solutions containing fluoride, acids, or alkalis.
English 15
HP M500 15” Color Monitor User’s Guide
Environmental Information
Environmental Information
HP has a strong commitment toward the environment. Your HP
monitor has been designed to respect the environment as much as
possible.
HP can also take back your old monitor for recycling when it reaches
the end of its useful life.
HP has a product take-back program in several countries. The
collected equipment is sent to of HP’s recycling facilities in Europe or
the USA. As many parts as possible are reused. The remainder is
recycled. Special care is taken for batteries and other potentially toxic
substances, which are reduced to non-harmful components through a
special chemical process. If you require more details about HP’s
product take-back program, contact your dealer or your nearest HP
Sales Office.
The cathode ray tube used in this monitor does not contain cadmium.
16 English
HP M500 15” Color Monitor User’s Guide
Hardware Warranty
Hardware Warranty
This is your HP Monitor Hardware Warranty Statement. Warranty terms may be
different in your country. If so, your Authorized HP Dealer or Hewlett-Packard Sales
and Service Office can give you details.
For Consumer Transactions in Australia and New Zealand: The warranty terms
contained in this statement, except to the extent lawfully permitted, do not exclude,
restrict or modify and are in addition to the mandatory statutory rights applicable to
the sale of this product to you.
Limited Monitor Hardware Warranty
Model
Warranty Period
Service provided
Model D2832A
3 years - unless original end-user
On-site service for 1st year, and
customer has otherwise agreed to return to an HP or
a shorter period of warranty at
the time of purchase.
repair-authorized reseller
service-center for the following
two years.
Hewlett-Packard (HP) warrants this monitor hardware product against defects in
materials and workmanship for the applicable warranty period stated above,
commencing from the date of purchase by you, the original end-user customer. If you
return this monitor hardware product with a defect as defined above, during the
warranty period, to an HP-authorized reseller or service center, HP will either, at its
option, repair or replace the defective product with a new or equivalent-to-new unit of
the same or equivalent model. Should HP be unable to repair or replace the product
within a reasonable amount of time, your alternate exclusive remedy shall be a refund
of the purchase price upon return of the product.
If you purchased this monitor hardware product for use with an HP personal computer
(Vectra, Brio or Kayak), please refer to the terms and conditions of the HP Hardware
Warranty statement provided with your HP personal computer (Vectra, Brio or Kayak),
including limitations, your responsibilities and method for obtaining warranty service.
Limitation of Warranty
The above warranty shall not apply to defects resulting from: misuse (including
“burned” screens); unauthorized modification; operation or storage outside the
environmental specifications for this monitor product; in-transit damage; improper
maintenance; or defects resulting from use of non-HP software, accessories, media,
supplies, consumables, or such items not designed for use with this product.
English 17
HP M500 15” Color Monitor User’s Guide
Hardware Warranty
HP MAKES NO OTHER EXPRESS WARRANTY, WHETHER WRITTEN OR ORAL,
WITH RESPECT TO THIS PRODUCT. ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED TO
THE DURATION OF THE EXPRESS WARRANTY SET FORTH ABOVE.
Some states or provinces do not allow limitations on warranty, so the above limitation
or exclusion may not apply to you. This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state, or province to province.
Limitation of Liability and Remedies
THE REMEDIES PROVIDED ABOVE ARE YOUR SOLE AND EXCLUSIVE REMEDIES.
IN NO EVENT SHALL HP BE LIABLE FOR ANY OTHER DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON
WARRANTY, CONTRACT, TORT, OR ANY OTHER LEGAL THEORY.
The foregoing limitation of liability shall not apply in the event that any HP product
sold hereunder is determined by a court of competent jurisdiction to be defective and
to have directly caused bodily injury, death, or property damage; provided, that in no
event shall HP's liability for property damage exceed the greater of $50,000 or the
purchase price of the specific product that caused such damage.
Some states or provinces do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
18 English
HP M500 15” Color Monitor User’s Guide
Regulatory Information
Regulatory Information
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name:
HEWLETT-PACKARD
Manufacturer’s Address:
5, Avenue Raymond Chanas - EYBENS
38053 GRENOBLE CEDEX 09
FRANCE
declares, that the product:
Product Name:
Model Number:
HP M500 15-inch Color Monitor
D2832A
conforms to the following product specifications:
SAFETY
International: IEC 950:1991 + A1 + A2 +A3 +A4
Europe:
EN 60950:1992 + A1 + A2+A3
EMC
CISPR 22:1993+A1 / EN 55022:1994 - Class B
EN 50082-1:1992
IEC 801-2:1992 / prEN 55024-2:1992 - 4kV CD, 8 kV AD
IEC 801-3:1984 - 3V/m
IEC 801-4:1988 / prEN 55024-4:1992 - 1 kV Power Lines
IEC 555-2:1982 + A1:1985 / EN 60555-2:1987
IEC 1000-3-3:1994 / EN 61000-3-3:1995
FCC Title 47 CFR, Part 15 class B2)/ ICES-003, Issue 2/ VCC-2 1)
AS/NZ 3548
Supplementary information: the product herewith complies with the requirements of the EMC Directive 89/336/EEC amended by the Directive 93/68/EEC
and the Low Voltage Directive 73/23/EEC, and carries the CE marking accordingly.
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2) This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Jean Marc JULIA
Grenoble, June 1998
Quality Manager
For Compliance Information ONLY, contact:
USA contact: Hewlett-Packard Company, Corporate Product Regulations Manager, 3000 Hanover Street, Palo Alto, CA94304. (Phone (415)857-1501)
English 19
HP M500 15” Color Monitor User’s Guide
Regulatory Information
Notice for the USA: FCC Statement
Federal Communications Commission (FCC) Radio
Frequency Interference Statement (USA Only)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protections against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try one of more of the following measures:
•
•
Relocate the radio or television antenna.
Move the computer away from the radio or television.
•
Plug the computer into a different electrical outlet, so that the computer and the radio or television are on
separate electrical circuits.
•
•
•
Make sure that all your peripheral devices are also FCC Class B certified.
Make sure you use only shielded cables to connect peripheral devices to your computer.
Consult your computer dealer, Hewlett-Packard, or an experienced radio/television technician for help.
WARNING
Hewlett-Packard’s system certification tests were conducted with HP-supported peripheral devices and HP
shielded cables, such as those you received with your system. Cables used with this computer must be properly
shielded to comply with the requirements of the FCC.
Changes or modifications not expressly approved by Hewlett-Packard could void the user’s authority to operate
the equipment.
X-Ray Radiation Notice
When operating, this product emits x-rays; however, it is well shielded and meets the safety and health
requirements of various countries, such as the Radiation Act of Germany and the Radiation Control for Health
and Safety Act of the United States.
Radiation emitted by this product is less than 0.1 mR/hr (1uSv/hr) at a distance of 10 centimeters from the
surface of the cathode ray tube. The x-ray radiation primarily depends on the characteristics of the cathode ray
tube and its associated low voltage and high voltage circuitry. Internal controls have been adjusted to ensure
safe operation. Only qualified personnel should perform any internal adjustments as specified in the service
manual for this product.
Replace the cathode ray tube with an identical CRT only.
General Notice
The HP D2832A 15-inch Color Monitor has been tested according to MPR 1990:8 for Emission properties and
meets the guidelines as given by MPR 1990:10 (2.01 - 2.04)
20 English
HP M500 15” Color Monitor User’s Guide
Regulatory Information
Notice for Japan
Notice for Canada
This Class “B” digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme a la norme NMB-003 du Canada.
Notice for the United Kingdom
The HP D2832A is approved under Approval Number NS/G/1234/J/100003 for indirect connection to public
telecommunications systems within the United Kingdom.
English 21
HP M500 15” Color Monitor User’s Guide
Regulatory Information
22 English
Paper not bleached with chlorine
Part Number: 5967-0371
Printed in Malaysia 06/98
|