T-910CM
9 Universal Ceiling Mount Monitor
M
E
MENU
POWER
AV
EXIT
OFF
ON
OWNER S MANUAL
HOW TO OPERATE THE MONITOR
Releasing the Monitor
CONTENTS
Push the open button (located on the front edge of the screen housing)
and lower the monitor to the desired angle. You can also adjust the
swivel angle.
,
Please read this User s Manual in detail and use the set properly.
CAUTION
4
5
M
E
MENU
POWER
AV
EXIT
ON
OFF
INSTALLATION
NAME AND FUNCTION OF EACH PARTS
Unit
6
Make this arrow in DOWN
direction only.
6
Remote Control
7
PULL BUTTON
CONNECTIONS
8
HOW TO OPERATION THE MONITOR
Releasing The Monitor
How To Watch Monitor
SPECIFICATIONS
9
9
How to watch the monitor
9
10
1. Connect the monitor to the external devices.
2. Press the POWER button on either the remote control or the unit once to turn
the power on.
Press the same POWER button to turn the power off.
POWER
POWER
REMOTE CONTROLLER
UNIT
3. Turn on the external devices and view.
9
2
CAUTION
CONNECTIONS
,
Please read and observe all warnings and instructions in this owner s manual
and those marked on the unit. Retain this booklet for future reference.
There are two kinds of alarm symbols as follows:
The lightening flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of
Red AUDIO(R)
,
dangerous voltage within the product s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to
GAME
White AUDIO(L)
Red AUDIO(R)
GAME
WARNING
people.
Yellow VIDEO
White AUDIO(L)
CAMCORDER
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
Yellow VIDEO
CAMCORDER
AV Input
(AV 2)
the product.
CAUTION
YELLOW
+ 12 V DC Battery
AV Input
(AV 1)
BLACK
Chassis Ground
RED
ACC
WARNING
Door Trigger
WHITE
Do not mount the product where
Installation of all TV monitors
must be out of the driver s
field of sight.
it will obstruct the deployment of
the airbag or in an area where it
would affect the vehicular control.
Also be careful to avoid mounting
the product where it can become
hazardous during sudden stops or
in the event of an accident.
M
E
N
U
Do not try and service these
products yourself, Seek only
a qualified service center or
factory service center.
Use extra caution with any liquids
in your car. If you or your child
Spills any liquid on these products,
pull your vehicle to the roadside
and turn the key off to disconnect
or wipe the products with a towel. Do not
operate the equipment until all liquids have
either evaporated or you have had the monitor
inspected at a service center by a qualified
technician, Severe harm or danger can
Occur.
Be careful not to drop or
apply under pressure to the
front panel of your video
monitor. If the screen cracks
due to misuse, your warranty
will be void!
Use only a damp cloth to clean
the screen and use only purified
water on the cloth. Wring out all
excess water prior to wiping the
screen. Do not use any cleaners
or chemicals to clean the screen.
In most cases a dry cloth will do!
+
Door Trigger
-
3
8
CAUTION
NAME AND FUNCTION OF EACH PART
MENU Button
OSD MENU EXIT Button
POWER Button
Dome Light Button
CAUTION
Watching the monitor for an
extended period of time
with the engine turned off
may deplete the vehicle s
battery.
Quality installations are best
performed by qualified and
certifled installers.
M
E
EXIT
MENU
AV
POWER
ON
OFF
This product is designed for
operation with a 12 Volt DC,
negative ground vehicle. It
is not suitable for operation
under other conditions or
voltages.
Don t touch the unit if there is
a flash of lightning. It may
receive an electric shock.
AV Select Button
+/- Buttons
Do not cover heater ducts or vents.
This may cause a fire or an electric
shock.
Interface Switch Function
Power Power ON/OFF
AV
Signal Select
Menu Press this button for OSD menu.
And select menu option
+
-
Increase current option value.
Decrease current option value.
Check Point
1. The operating temperature of this product is limited to 14 F~140 F
(-10 C~60 C).
Your vehicle can reach temperatures up to 100 C in the summertime.
2. When your vehicle is extremely hot or cold you must allow time for your air
conditioner or heater to cool or heat the vehicle and for operating temperatures
to return to normal operating ranges. Your monitor will return to its normal
functions when these operating ranges are achieved.
3. Optimum picture quality is achieved when you are directly in front of the monitor
(+/-45 degrees).
POWER KEY
AV1/AV2 KEY
MENU KEY
+ KEY
4. If the buttons get stuck, please try to press the up of buttons, it will get back.
It won't impact using normal.
- KEY
5. If you cann't find the files name in list when playing, please reset units or turn
off/on over again.
LCD MONITOR
6. If the unit cann't be change mode when playing some special files which the
unit didn't support, please reset units or turn off/on over again.
REMOTE CONTROL UNIT
7
4
INSTALLATION
NAME AND FUNCTION OF EACH PART
1. Open the package and check that these items are presents.
Unit
Dome light
INSTALLATION PLATE
UNIT
SCREW A
SCREW B
M
E
MENU
POWER
AV
EXIT
OFF
ON
2. Connect the external compoments to the RCA cable or AV output.
(Refer to the connection diagram on page 8)
3. Match the position of installation bracket and
installation plate with screw A.
Infrared Transmitter
Monitor
(Front)
M
MENU
POWER
AV
PLAY
OFF
ON
Reset
Audio
Video
4. Tighten the unit with the supplied
screw B.
AV2 Inputs
Monitor
(Rear)
5
6
|