E
X C E L L E N C
E V E R F O R E
User Manual
*Covers StepNote SA Series Notebook Computers
Table of Contents
Right Side Connectors ...................................................................36
Front Side Connectors ...................................................................37
Back Side Connectors....................................................................38
CHAPTER 4................................................................................................39
SYSTEM SOFTWARE ......................................................................... 39
Instant Recovery Software.............................................................40
CHAPTER 5................................................................................................41
POWER MANAGEMENT...................................................................... 41
Power Management.......................................................................42
Monitoring Battery Power...............................................................43
Power Saving Modes .....................................................................44
Power Saving Tips .........................................................................45
When to Replace the Battery.........................................................46
Heat Considerations.......................................................................46
CHAPTER 6................................................................................................47
USING THE BIOS SETUP UTILITY ...................................................... 47
Using the BIOS Setup Utility ..........................................................48
APPENDIX A ..............................................................................................56
FREQUENTLY ASKED QUESTIONS ..................................................... 56
Frequently Asked Questions..........................................................57
APPENDIX B ..............................................................................................60
STATEMENTS.................................................................................... 60
Statements .....................................................................................61
European Notice ............................................................................63
UL CAUTION .................................................................................64
Canadian Department of Communications....................................65
Battery Disposal.............................................................................66
CAUTION FOR ADAPTER ............................................................66
BATTERY CAUTION .....................................................................66
CLASS 1 LASER PRODUCT.........................................................66
ii
Chapter 1
Introduction
Chapter 1
Getting Started
Congratulations on your decision to purchase an Everex® computer.
Your new notebook features the most innovative features in portable
computing technology. It combines state-of-the-art ergonomics with
sophisticated architecture to provide you with a personal computer that
is compact, powerful, and easy to use. Designed for a wide range of
general, business, and personal productivity applications, the Everex
StepNote is an ideal choice for use in the office, at home, and on the
road.
For maximum expandability without compromising portability, the
notebook accommodates a number of modules, including Optical
Drive, three USB ports, one Express card and one 4 in 1 card slot. The
high capacity hard disk drive provides you with plenty of storage space
for multimedia files and applications.
This Manual contains all the information you need to set up and use
your new notebook. It describes all the features of the notebook in an
easy-to-read, yet thorough manner.
2
Chapter 1
Inventory
This computer system is designed for years of productive and
pleasurable computing. Use this section to keep details of your
purchase. This information will be required should you need to make
repairs to your notebook during the warranty period. Update this
section when you add new options.
DATE OF PURCHASE:
PLACE OF PURCHASE:
DEALER'S NAME:
DEALER'S ADDRESS:
TELEPHONE:
E-MAIL ADDRESS/WWW:
CONTACT PERSON:
MODEL NUMBER:
SERIAL NUMBER:
BIOS VERSION:
The serial number is on the label (with a bar code) on the bottom side
of the computer. The BIOS revision number will appear briefly on the
screen after turning on the computer, before the graphic BIOS screen
appears. Press the Del key to enter BIOS setup screen.
3
Chapter 1
Safety and Maintenance
You can use your computer under a wide range of environmental
conditions. However, to ensure long use and continued high
performance, consider the following factors when setting up your
computer:
•
Follow all warnings and instructions noted in this documentation
and in the Windows Help program.
•
The first time you use your computer, we recommend that you
carefully read the Making Connections section of this manual
and initialize the battery to ensure optimum battery performance.
•
Unplug the computer from the power outlet before cleaning. Use
a damp cloth for cleaning. Do not use aerosols, solvents, or
strong detergents.
•
•
•
Do not use the computer near open water or other liquids. Never
spill liquid onto the computer.
Do not place the computer in an unstable location where it might
slip or be knocked over. Serious damage could result from a fall.
Slots and openings in the system cabinet are for ventilation
purposes. Do not block or cover these openings or the system
could overheat. Do not use or store the computer near a source
of heat or dust.
•
On the base or rear panel of this notebook, there is a label with
information on the power requirements of this system. These
requirements must be followed. If you are unsure of your local
power supply, consult your dealer or local Power Company.
•
•
Do not step on or place anything on the power cord.
If you use the computer with an extension cord, ensure that the
total ampere ratings of all the devices sharing the extension do
not exceed the rating of the extension cord or the rating of the
wall outlet.
•
•
Never push foreign objects into the computer through any of the
slots or openings. Dangerous voltages are present, which could
cause electric shock or fire, or damage sensitive components.
For best results, use a power strip with a built-in surge protector.
Do not use inferior extension cords as this may result in damage
to your computer.
4
Chapter 1
•
Set the computer on a flat, stable surface. To prevent damage to
the computer’s hard disk drive, avoid using the computer where
it will be exposed to strong vibration.
Checklists
After opening the package, carefully inspect the contents. If any of the
items is missing or appear damaged, contact your dealer. The
shipping carton should contain the following:
STANDARD
A notebook computer with a hard disk drive
An internal battery
An Optical drive
An AC adapter with power cord
OPTIONS
The following items are normally optional, but some vendors may
include them in the standard package. Some items may not be
available in some countries, or some vendors may choose not to carry
all the items.
512 MB or 1GB DDRII SODIMM memory cards
Caution: When purchasing any of the accessories listed above,
purchase only those accessories that are approved for use with your
computer. The above accessories are proprietary items. Your system
vendor can obtain these approved accessories. If you use items that
are not approved for use with this computer, you may cause your
computer to malfunction, or to emit or receive electro-magnetic
radiation in excess of local regulations. For non-proprietary
accessories such as PC cards or printers, ensure that the accessory
functions properly in your computer before making the purchase.
Your system vendor may be able to recommend reliable brands and
models.
5
Chapter 1
Features
High Capacity Hard Disk Drive
The computer has a high capacity hard disk drive, to store your favorite
programs and large multimedia files.
Built-in Modem/LAN Capability
A built-in 56k modem and 10/100 Mbps Ethernet port allows you to access
the Internet or a local area network (LAN).
LCD
Your computer has an easy-to-view WXGA LCD panel.
Built-in Stereo Speakers and Microphone
The stereo speakers and internal microphone enable you to run a variety of
multimedia applications.
Convenient Audio Control
The conveniently located audio control knob enables you to easily adjust
the volume to the stereo speakers.
Launch Keys and Function Keys
One Instant On hot keys give you quick access to play a variety of
multimedia applications. Function keys give you easy control of power
management, volume and your monitor.
6
Chapter 1
Where to Look For Information
About Your Computer
This User’s Manual describes the key elements of your computer. New
users can find a simple step-by-step orientation in the Quick Start section
of this chapter.
About Windows
Windows Online Help, found on the Start menu, offers extensive Windows
assistance. Tour Windows XP offers an online orientation for new
Windows users. Find it in:
Start/Programs/Accessories/System Tools.
7
Chapter 1
Quick Start
Turning on the Computer for the First Time
1. Connect the AC adapter
power cord to the AC
adapter.
2. Connect the AC adapter
to the DC power port on
the right side of your
computer.
3. Connect the AC adapter
power cord to an AC
outlet.
4. Slide the cover latch in
the direction of the
arrows to open the LCD.
Note: The battery is not fully charged.
5. Open the LCD panel to
a comfortable viewing
angle.
Allow your battery to fully charge before
using it (i.e., before disconnecting AC
power). Calibrating the battery before use
is also highly recommended. Refer to
Chapter 4, Power Management, for further
information.
6. Press the power button
to turn on the power.
Use the touchpad to move the cursor on the screen. Move your finger across the pad to
control the cursor, and press the right and left buttons beneath with your thumb. These
buttons have the same functions as the right and left buttons of a standard mouse. You
can also click or double-click by tapping on the touchpad.
8
Chapter 1
Loading Windows
The following section is for installing the Windows operating system
only. If you are installing a different operating system, please check
with your vendor for installation details.
Your computer will
begin loading Windows
once you turn on the
power. Wait a few
seconds for Windows
setup to load. The
Windows setup will
P ro d u ct key n u m b er
prompt you for the
product key number,
shown to the right:
Note: The product key is on a sticker
attached to the bottom of the Notebook.
Type your name, and, if applicable, the name of your company.
Read the End User's License Agreement. Click Next to accept it.
Enter the product key number. You can find this on the Certificate of
Authenticity on a sticker attached to the computer. Click Finish.
The Start Wizard will prompt you to set the date, and your local time.
After the Start Wizard updates your system settings, the Welcome to
Windows screen will appear. You may disable this feature by clearing
the check box labeled show this screen each time Windows starts.
Some software comes preloaded with Windows. New users can
familiarize themselves with this software by selecting Programs from
the start menu, then clicking on programs to run them.
9
Chapter 1
Adjusting the Volume
You can adjust the volume with hot key combination as below:
• Fn + F8 decreases the volume
• Fn + F9 increases the volume
• Fn + F10 Mute the volume
Alternatively, you can adjust
the volume with the Windows
volume control applet located
on the taskbar.
Adjusting the Brightness
Use the following hot key combinations to adjust the LCD panel
brightness:
•
•
Fn + F6 decreases the brightness
Fn + F7 increases the brightness
10
Chapter 1
Turning off Your Computer
Turning off the computer properly is important to maintaining your
computer.
1.On the Start menu, click
Turn off Computer.
2.Click the radio button Turn Off in
the Turn off Computer Windows
screen, and then click OK.
If you are going to be away from the computer for a short period, there
are ways of conserving power without shutting down the system. See
Chapter 5, Power Saving Modes, for details.
Warning: Shutting off the computer improperly may result in
data loss.
Making a Startup Disk
If you have trouble starting Windows, the startup disk can be used to
start your computer and fix many problems. Refer to the Windows user
manual for instructions.
11
Chapter 1
Tips for New Owners
Take responsibility for backup
Back up files often. Users who need to manage large amounts of data
may wish to use backup devices such USB drive. If you use your
notebook as a networked workstation with system backup, talk to the
system administrator about backup procedures for your notebook.
Don't leave passwords anywhere on your notebook or
carrying case
Be careful when placing your notebook on an airport
security conveyor belt
In most airports, security conveyor belts are safe for computers. If you
are not sure, ask the security staff. You should keep a close eye on
your computer. When you are in a hurry, make sure that you walk
away with the correct notebook computer!
Tape your business card to the notebook and accessories
In the workplace, notebooks and accessories may often look exactly
alike, leading to equipment mix-ups. Prevent such mix-ups by placing
your name on your equipment.
Develop ergonomic work habits
The science of ergonomics studies the relationship between health
and a suitable work environment. For more information on ergonomics,
contact your nearest computer bookstore, or local library. The Internet
also has information on this and other related subjects.
12
Chapter 1
Never take the notebook anywhere without the carrying
case
A broken screen or case can be costly to repair. Prevent accidents by
carrying the computer in a suitable carrying case.
Consider using a lock
For added security, consider purchasing a Kensington lock to put into
the Kensington lock hole on the back side of your computer (see
Chapter 2, back View). Use the Kensington lock to secure the
computer to a desk or table.
Note: Using a computer for extended periods of time with a poor
workstation setup and incorrect work habits can cause health
problems.
13
Chapter 2
Getting Started
Chapter 2
Hardware and Software
This chapter introduces the different components and controls of your
notebook computer, including the hardware components, the software, and
the audio and video systems.
Getting Started
Before you begin using your computer, read this chapter to familiarize
yourself with the main components installed in the system. Lift the LCD
screen and open up the computer.
15
Chapter 2
Front View
1. LCD panel
7. Wireless LAN switch
8. Media Player button
9. Microphone-in jack
2. Power button
3. Keyboard
4. Status indicators
5. Touchpad
10. Audio-out jack for external
speakers or headphones
11. MS/MMC/SD/MS Pro card slot
12. Microphone
6. Touchpad buttons
1
3
8
2
5
4
6
12
10
11
9
7
16
Chapter 2
Left View
1. Kensington lock hole
2. DC in jack
3. IEEE 1394 slot
4. Optical drive
5. Optical drive button
17
Chapter 2
Right View
1. USB ports
2. Express 34/54 card slot
3. VGA external video display port
18
Chapter 2
Back View
1. Fax/modem RJ-11 jack
2. LAN RJ-45 jack
19
Chapter 2
Bottom View
1. Ventilation slot
2. Battery release latch
3. Battery
4. Speakers
20
Chapter 2
LED Status Indicators
The status indicators in the upper left corner of the keyboard light up
when a particular function of the computer is active. Each indicator is
marked with a symbol.
The computer is reading information
CD-ROM Drive
from the optical drive.
Number-Lock
Caps-Lock
The keyboard is in Num-Lock mode.
The keyboard is in Caps-Lock mode.
Power Indicators
The power indicators show which power source the system is using. The
power indicators remain active and viewable even when the LCD panel is
closed.
Icon
Light
Description
Power is on and the
AC adapter is in use
Blue
Power is in suspend
mode
Flash blue
Blue
Wireless LAN is in
use
Green
Fully Charged
Orange
Battery is charging
Flashing
Orange
Low battery
21
Chapter 2
Function Keys
Hold the Fn key while pressing the numbered function key.
Function key
Fn + F3
Description
Toggles display on/off
Fn + F4
Suspend to RAM/HDD
Toggles between LCD/CRT displays
Decreases LCD brightness
Increases LCD brightness
Decreases Volume
Fn + F5
Fn + F6
Fn + F7
Fn + F8
Fn + F9
Increases Volume
Fn + F10
Mute Volume
Numeric Keypad
The embedded numeric keypad
consists of ten keys that make
number intensive input more
convenient. Press <NumLock> to
enable or disable the numeric
keypad.
22
Chapter 2
Touchpad
The touchpad is a pressure sensitive pointing device that provides all the
features of a two-button mouse. Its primary function is to move the cursor
around the screen.
Touchpad
buttons
Touchpad
The instructions listed below describe how to use the touchpad.
1. First, place your fingers on the keyboard in the normal typing
position. The touchpad is easily accessible by moving either your
left or right thumb off the space bar and on to the touchpad.
2. Gently move your thumb across the pressure-sensitive touchpad in
the direction you want the cursor to move. The pad detects the
change in pressure and moves the cursor in the corresponding
direction.
3. The touchpad offers another method of making selections in a
software program. It is called double-tapping. This function
corresponds to double-clicking with a mouse. Once the cursor
has been moved to the object you want to select, lightly double-
tap the pressure sensitive touchpad. This double-tapping on the
touchpad will select the desired item and prompt the software to
perform the related operation.
4. The buttons located directly below the touchpad are the same in
function as those on a two-buttoned mouse. Clicking these buttons
makes selections, drags objects, or performs a variety of other
functions depending on the software. To select an object, first move
the pointer over the object you want to select, and then press the
left button one time. The functions of these buttons are software
specific.
23
Chapter 2
5. Double-clicking is a common technique for selecting objects or
launching programs from icons. Once you have moved the
pointer over the object you wish to select, rapidly press the left
button two times. This action is commonly referred to as “double-
clicking” an object.
Dragging
There are two ways to drag:
•
Move the pointer to the desired location then press down the left
button. While still holding down the left button, move the pointer
to the desired location. Release the button.
•
Move the pointer to the desired location. Tap the touchpad twice
quickly as if you were double-clicking, however do not remove
your finger after the second tap. Move the cursor to the desired
location. Lift your finger to finish dragging.
Adjust the touchpad settings by selecting Settings/Control
Panel/Mouse/Buttons. These settings allow you to change the
orientation of the touchpad from right-handed to left-handed, and fine
tune the pointer movement and timing of clicks.
Touchpad Precautions
The Touchpad is a pressure-sensitive device. If not properly cared for,
it can be easily damaged. Please take note of the following
precautions.
•
Make sure the touchpad does not come into contact with dirt,
liquids or grease.
•
•
Do not touch the touchpad if your fingers are dirty.
Do not rest heavy objects on the touchpad or the touchpad
buttons.
Scrolling lines
If you are scrolling through a document, you may find that using the
scrolling line is more restful to your hand than holding down a mouse
button. The scrolling line is located on the touchpad.
24
Chapter 2
The Optical Drive
Your computer comes with a pre-installed Optical drive. The optical
drive can read or write both DVDs and CDs. Your notebook identifies
the drive with the letter following the hard drive letter. If your hard drive
is D, then the optical drive will be E.
Inserting a Disk
1. Press the button on the front of
the drive to open the disk tray
and pull the tray open.
2. Place the disk on the tray, label
side up.
3. Place the disk on the central
spindle and press gently until the
disk clicks into place.
4. Slide back the tray until it clicks
shut.
Removing a Disk
5. Make sure the computer is not
accessing the optical drive.
6. Press the eject button and pull
the tray all the way out.
7. Pick up the CD by the edges and
remove the disk from the tray.
Push the tray into the computer
until it closes fully.
Warning: When the computer is reading from a DVD-ROM/COMBO,
the indicator light for the DVD-ROM will flash on. Do not attempt to
remove a disk while this light is active.
Precautions for Handling DVD-ROM Discs
Keep these precautions in mind when handling DVD-ROM discs.
•
•
•
Always hold the disc by the edges; avoid touching the surface of
the disc.
Use a clean, dry, cloth to remove dust, smudges, or fingerprints.
Wipe from the center outward.
Do not write on the surface of the disc.
25
Chapter 2
•
•
Extremes in temperature may damage discs. Store discs in a
cool dry place.
Do not use benzene, thinners, or cleaners with detergent. Only
use optical cleaning kits.
•
•
Do not bend or drop the discs.
Do not place objects on top of discs.
Warning: Do not insert any foreign
objects into the disc tray. Do not
force the tray to open or close
manually. When not in use, keep
the tray closed to prevent dust or
dirt from entering the drive unit. If
you experience difficulty when
removing a CD disc, stretch a paper
clip (or use a pin or a thin metal rod)
and insert it into the emergency
eject hole located on the front panel:
The CD disk tray should eject immediately. This procedure can also
be used to remove a CD from the drive when the notebook is powered
off.
Connecting the Printer
To connect a printer to your notebook via the USB port, use the supplied
USB to printer adapter cable.
Note: Before use, you must install the driver for the adapter cable.
26
Chapter 2
The Express Card Slot
The express card slot can be used as an interface between your
computer and a variety of communications devices, such as network
adapters, SCSI adapters, fax/modems, or provide additional data
storage capacity.
Installing a Card
1. The top side of a express card is
usually identified with a label.
Insert the card into the slot with
the label side up and the edge
with pinhole contacts going in
first.
2. Insert the card into the slot. You
will feel some resistance as the
Slide the card into the slot.
card slides into the back of the
slot.
Push the button to eject the card.
3. Express cards require drivers, or a program that allows the
operating system to use a specific device. Many drivers are
included with Windows, but if not, you will be prompted to install
the driver included with your card.
4. The computer will beep twice to indicate successful installation.
Note: Please read the instructions included with individual express
cards. Some cards may be inserted with power on, while others
require that the computer be turned off.
Removing a Card
•
Press again to release the card.
27
Chapter 2
Express Card Size Restrictions
•
The card will not able to eject if it is less the 75mm.
28
Chapter 2
The Graphics System
Your computer has a high-performance graphics system, which can
easily handle the demands of today's multimedia computing.
Screen Controls
Brightness
Function keys can increase or decrease the brightness of the monitor.
•
•
<Fn> + <F6> decreases the LCD panel brightness
<Fn> + <F7> increases the LCD panel brightness
Resolution
•
Click My Computer/Control Panel/Display/Settings. Click the
Settings tab. The dialog box indicates the monitor resolution.
•
Use the slide bar to adjust the resolution. Normally, you should
use the resolution the LCD or monitor was designed for.
High Resolution with an external monitor
Higher resolution modes may be used, as long as the monitor
supports them.
Connecting to an External Monitor
The notebook has a VGA monitor port to connect your computer to an
external monitor.
Using the VGA monitor port
1. Locate the 15-pin VGA monitor port on the right side of your
notebook and connect the video signal cable from the external
monitor (or the VGA adapter) to the monitor port.
2. Connect the power cable from the external monitor to a power
outlet and turn on the monitor.
3. On your notebook, click the right touchpad button on the
Windows desktop to open the desktop menu. Click Properties to
open the Display Properties window.
4. In the Display Properties window, click Advanced in the Settings
tab. Click the Display Modes tab.
5. Under Driver mode, you can select the appropriate options to
change the display to an external monitor.
6. Adjustments to screen resolution and color depth can also be
29
Chapter 2
made in this dialog box.
Dual Displays
With Windows system, you may use an external monitor
simultaneously with your notebook’s LCD. You may also use the
external monitor only and disable the LCD or only use the LCD. To do
this you may first need to enable the multiple display settings in
Windows XP.
1.
Open the Control
Panel.
2.
Double-click
Display. The
Display
Properties
window opens.
3.
4.
Click the
Settings tab.
Click the
Advanced
button.
5.
6.
7.
Click the Display
Modes tab. The
screen shown at
the right appears.
Choose Intel®
Graphics Media
Accelerator for
Mobile.
Click Graphic
Properties
30
Chapter 2
These options are described below.
Single
You can choose which device to apply as the
Primary display.
In Single mode, the video display hot key
combination is available—you can cycle the video
output by pressing the Fn + F5 keys.
In Mirror mode, the video display hot key
combination is available—you can cycle the video
output by pressing the Fn + F5 keys.
Mirror
If the external CRT is connected, the display on the
LCD and the CRT is the same.
31
Chapter 2
Tip: To ensure trouble-free video output, the first time you use an
external monitor, change the output in the Display Properties dialog box.
After successfully switching modes, you may use the video function keys.
Note: Light or dark dots may appear on the LCD due to technical
limitations of LCD manufacturing. This will not effect normal operation of
the LCD.
Communication Components
This system provides powerful communication functions, including
built-in Fax/Modem jack, LAN jack and Express card slot.
Fax/Modem and LAN
Fax/Modem and LAN jack on the left side of the computer allows you
to connect to the Internet to send and receive data. When used with
fax software, it can be used as a fax. When using this function, first
plug the phone cord into the Fax/Modem jack.
Attention:
When using the data communications function, please do
not plug the phone cord into the ISDN or PBX jack to
avoid an electrical surge that will cause the MDC
module to burn.
1394 Anti-electromagnetic wave clip
To eliminate electromagnetic waves, it is strongly recommended that
you thread the 1394 cord through the clip provided as shown below
when using 1394 device.
32
Chapter 2
Information about the Wireless LAN button
Wireless LAN button
Even when a Wireless LAN module
has not been built-in to your
computer, the Wireless LAN indicator
lights and remains active when you
turn on the Wireless LAN button near
the power button of your computer.
If Wireless LAN module has been
built-in, your notebook will search for
the device and will display an icon on
the Windows task bar.
Note: If your Notebook does not include a built-in Wireless LAN
module, please turn off the Wireless LAN button. If turned on, the
indicator lights and remains active even if no wireless LAN is
present.
Built-in Wireless Local Area Network
The built-in Wireless Local Area Network (WLAN) interface card can
provide a quick access without using cables for the connection to the
network equipments. The interface card adopts the IEEE 802.11
protocol and uses the 2.4/5 GHz ISM electric wave frequency band as
the transmission interface to set up the communications between the
host computer and other computers.
The way of processing communications through the WLAN interface
card is the same as that through Ethernet interface card. The
“Configuration Tool” is a Window application program. If users have a
computer equipped with the WLAN interface card, then users can use
it to set up the interface card and show the current configuration and
status.
Note: Contact your distributor for the information of upgrading
the wireless local area network.
33
Chapter 3
Making
Connections
Chapter 3
Making Connections
Your computer is equipped with a full array of ports and connectors,
including standard input/output (I/O) ports for quickly and easily adding
peripheral devices such as printers, keyboards, and mice. Refer to
documentation included with individual devices for details on
connecting these devices to your computer. Along with the standard
ports found on most computers, your computer also includes IEEE
1394 ports, modem and LAN ports, offering advanced communications
technology.
Left Side Connectors
1. Kensington Lock
Your computer includes a Kensington lock hole to be used with a
standard Kensington lock. You can connect the notebook to a large
object with the Kensington lock to prevent theft of your notebook. See
the documentation that comes with your Kensington lock for more
information.
2. DC in jack
Connect the DC power cable from the AC adapter to this jack
3. FireWire / IEEE 1394 / 1394a Port
This is a high-speed serial data port. You may connect any FireWire
compatible device to this port.
4. Optical Drive
Your computer comes with a built-in Combo or DVD dual Drive. You
may view DVDs and write to a CD±R, CD±RW, DVD±R or DVD±RW
disc.
35
Chapter 3
5. Disk Eject Button
Press the eject button to eject the disk tray. The manual eject keyhole
is located next to it and allows you to manually eject a jammed disc.
Right Side Connectors
1. USB 2.0(Universal Serial Bus) Ports
The Universal Serial Bus (USB) is the latest standard for attaching
monitors, input devices, scanners, and other devices to a PC. USB
devices can be chained together on a single cable.
2. Express 34/54 Card Slot
This slot is where a express 34/54 card is inserted.
3. VGA Out (External Video) Port
The 15-pin VGA port can be used to connect your computer to an
external monitor. (See the Graphics System in chapter 2 for more
information).
Note: The USB 2.0 port constantly supplies 5V power to the external
USB device even when the system is at power off state. This enables
external USB device to be charged at any time without turning on the
system. To prevent draining the battery power when the system is
power off, remove the external USB device when not in use.
36
Chapter 3
Front Side Connectors
1. Wireless LAN On/Off
Build in wireless LAN card IEEE802.11A/B/G for user accessing the
Internet without wire cable through by this switch On/Off.
2. Microphone-in Jack
Connect a microphone to this jack to record.
3. Audio-out Jack
Connect a stereo headset or external speakers to this jack to
listen to multimedia.
4. MS Pro/MS/MMC/SD 4-in-1Card reader slot
The 4-in-1 card reader slot is specially used for the device with a MS
Pro/MS/MMC/SD interface card. Insert the card into 4-in-1 card reader
slot securely for device access.
37
Chapter 3
Back Side Connectors
1. Fax/modem RJ-11 Jack
The fax/modem can transmit data using the 56 Kbps V.90 protocol,
and send and receive faxes at 14.4 Kbps. In some countries, local
regulations may not permit the use of the fax/modem designed for this
system. In this case, you may use an add-on modem.
2. LAN RJ-45 Jack
With the built-in Ethernet LAN combo, you can make LAN connections.
Connection speed is up to 100 Mbps.
Warning: Plug your modem into an analog telephone jack only. Most
homes use analog lines. Do not use digital lines, such as
the PBX and ISDN systems found in many offices. Digital
lines may damage your modem.
38
Chapter 4
System Software
1
Instant Recovery Software
No need to locate a recovery CD to restore your software settings, it is
already pre-installed on your notebook hard drive. Simply follow the
steps below and restore your notebook to the original factory settings.
How to Access Your Instant Recovery Software
1.
2.
3.
4.
Turn your computer on and press F4.
Click Protect/Recover on left hand menu.
Click Phoenix FirstWare Recover Pro.
System restarts and will take 15 seconds until the next step is
displayed.
5.
6.
From Phoenix FirstWare Recover Pro Quick Start, click
Advanced
From Recover Pro, Factory Restore Point is the default selection.
Click Factory Restore Point.
7.
8.
9.
From the Recover Pro prompt, click Yes.
FirstWare Recover Pro will load.
Click Recover Entire Drive.
10. Prompt appears, click Yes.
11. Recovery begins.
40
Chapter 5
Power
Management
Chapter 5
Power Management
Battery Calibration
The first time you use a battery, you should calibrate it. The calibration
process empties and charges the battery one time. This allows the
Windows battery gauge to accurately monitor battery status. To
calibrate a battery, follow these steps:
•
Plug in the AC adapter.
Restart the computer and when the startup screen appears, press
Del key to enter the BIOS Setup Utility.
In the BIOS Setup Utility, select Advance settings. , choose Battery
learning, then press enter.
Execute Battery Learning function?
[OK]
[Cancel]
Press <OK> at the above Battery Auto Calibration dialog to begin the
battery calibration..
Battery Calibration will take from 4 to 8 hours, depending on how
much power the battery may already contain.
Note: For optimum performance, we recommend calibrating the
battery again every three months. Each time you charge and
discharge a battery, it loses a tiny part of its storage capacity, so that,
over time, it will store less than its potential charge. Similarly, if you do
not use the battery for a few days, it will slowly self-discharge, and
when it is recharged, it will hold less than 100% of the potential
charge.
42
Chapter 5
Monitoring Battery Power
There are two ways to
monitor how much power
the battery has left.
1. Click start/Control
Panel/Power Options;
then click Power
Meter.
2. Moving the cursor to
the battery icon on the
taskbar is the simplest
way to check on
battery power status.
If you do not see the battery icon, enable it in Start /Control
Panel/Power Options. Choose the Advanced tab and click “Always
show icon on the taskbar.”
Low Battery Alarms
How your computer responds to a low battery condition is set under
Start/Control Panel/Power Options/Alarms.
Two different power alarms can be enabled or disabled: the Low
Battery Alarm, and the Critical Battery Alarm. Use the slidebar to set
the power level at which the alarms are activated. Click on the Alarm
Action button to choose whether the alarm sounds, displays a
message, or both.
Warning: When battery power is low, the Notebook will display a
warning on the screen. Take immediate action, such as saving files or
connecting to the AC adapter, or data may be lost.
When the computer alerts you that the battery is low, immediately do
one of the following:
•
•
Connect the AC power adapter
Save your work, turn off the computer and replace the
discharged battery with a charged battery (See Changing the
Battery below).
43
Chapter 5
Do not restart the computer until you have connected to an AC
adapter, or replaced the discharged battery with a charged battery.
Battery Charging
When you use the AC adapter to connect your Notebook to a power
outlet, the internal battery will automatically begin to recharge. While
the battery is charging, the Battery Charge icon on the Indicator panel
will be active. When the battery is fully charged, the Battery Charge
icon will turn off.
If your computer is turned off or standby mode, a fully discharged
battery will take about 3 hours to recharge.
Note: A fully charged battery can run the Notebook for approximately
3.5 hours.
Power Saving Modes
Adjust the default power management settings in the Power Options/
Advanced dialog box in the Control panel. The Power Options
Properties dialog box allows you to set different actions to take when
the computer is left idle for a certain amount of time.
Suspend Mode
There are several possible settings for suspend mode, which can be
selected in the Power Management dialog box: You may have the
notebook standby, suspend, or you can power off the computer
altogether.
Initiating Suspend Mode
There are four ways to initiate suspend mode. The settings can be
adjusted in the Power Management dialog box:
•
The computer will automatically enter suspend mode when not
used for a set period of time.
•
Selecting the Stand by button in the Shut Down Windows dialog
box.
44
Chapter 5
•
Closing the screen cover (assuming no external monitor has
been connected).
•
•
Pressing the power button (if enabled in power settings).
Pressing the suspend function key <Fn> + <F4>.
Power Button Settings
The function of the power button can be set to Shutdown or Standby in
the Power Management Properties dialog box in the Windows Control
Panel. However, holding the power button down for more than four
seconds will force a power off while operating under any situation,
resulting in the loss of any unsaved information.
Power Saving Tips
•
Avoid operating the fax/modem, or audio and video applications
when using battery power. Operating a fax modem, video, or
audio equipment increases the computer's power requirements.
•
Decreasing monitor brightness can also save power. Decrease
brightness by pushing <Fn> + <F6>. Increase it by pushing <Fn>
+ <F7>.
45
Chapter 5
When to Replace the Battery
Over time, the battery's capacity gradually decreases. We recommend
that you replace your battery when you notice that it begins to store
significantly less charge.
Changing the Battery
Change the main battery pack as
follows:
1. Turn off the computer.
1
1
2. Close the screen cover and turn the
computer over.
3. Slide the side battery latch (1) away
from the battery. Continue to hold it
until the battery is removed.
4. Remove the battery.
5. Make sure the replacement battery is
properly orientated. Slide back the
side battery latch (1) then insert the
battery into the battery compartment.
Check that the latch locks back into
position.
Heat Considerations
The computer's processor has been specially designed to consume
little power, and generates very little heat. However, working in a hot
environment, or working for long periods may raise the temperature.
Your computer takes the following steps to lower temperature:
•
The cooling fan will automatically turn on. You may feel air
coming from a vent at the left side when this happens.
•
If the temperature continues to rise, processor activity will be
reduced. You may notice a slight loss of performance when this
happens.
46
Chapter 6
Using the BIOS
Setup Utility
Chapter 6
Using the BIOS Setup Utility
Your notebook has a BIOS setup utility which allows you to configure
important system settings, including settings for various optional
functions of the computer. This chapter explains how to use the BIOS
setup utility.
BIOS Setup Menu
The BIOS setup Utility allows you to configure your computer’s basic
settings. When you turn your computer on, the system reads this
information to initialize the hardware so that it can operate correctly.
Use the BIOS setup utility to change your computer’s start-up
configuration. For example, you can change the security and power
management routines of your system.
Starting the BIOS Setup Utility
You can only enter the BIOS setup utility as the computer is booting,
that is between the time you turn on the computer and before the
Windows interface appears. If your computer is already on, shut down
your computer completely (power off) and restart it and then press the
Del key to enter the setup utility.
48
Chapter 6
Navigating and Entering Information in BIOS
Use the following keys to move between fields and to enter information:
Å Æ
Select Screen
Push the up and down arrow keys to move
among selections, then press Enter to make a
selection.
+ -
Tab
F1
Change Option
Select Field
General Help
Save and Exit
F10
Press Esc to exit any section. If you wish to exit
the BIOS utility without saving changes, go to
the main menu, then press Esc.
ESC
Users are allowed to enter new values to replace the default settings
in certain fields, and the rest fields are specified by system default
parameters and cannot be modified by users. Reverse the attribute of
the main options and press the Enter key to enter into the submenu.
Press the Esc key to return to the previous configuration page.
49
Chapter 6
The Main Menu
BIOS SETUP UTILITY
Main Advanced Boot Security Exit
System Overview
Use [ENTER] , [TAB]
Or [SHIFT-TAB] to
select a field.
AMIBIOS
Build Date: 05/09/06
Use [+] or [-] to
Configure system Time
Processor
Type : Genuine Intel® CPU T2300@
Speed :1666MHz
System Memory
Size : 1016MB
←→ Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
System Time
System Date
[19:14:50]
[Thu 01/01/2006]
V02.59 ©Copyright 1985-2005, American Megatrends , Inc.
Figure 6-1
50
Chapter 6
Advanced Menu
BIOS SETUP UTILITY
Main Advanced Boot Security Exit
Advanced Setting
Battery Learning Function
Battery Calibration
Start FAN Calibration
Auto DIM function
Legacy USB Support
[ Enter ]
[ Enter ]
[ Enable]
[ Auto ]
←→ Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
V02.59 ©Copyright 1985-2005, American Megatrends , Inc.
Figure 6-2
51
Chapter 6
Boot menu
BIOS SETUP UTILITY
Main Advanced Boot Security Exit
Specifies the boot
1st Boot Device [CD/DVD: 3M-_NEC]
2nd Boot Device [SATA : PM-HTS541080G]
3rd Boot Device [Networking: Realtek Bo]
sequence from the
available devices.
A device enclosed in
Parenthesis has been
disabled in the
corresponding type
menu.
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
V02.59 ©Copyright 1985-2005, American Megatrends , Inc.
Figure 6-3
52
Chapter 6
Security menu
BIOS SETUP UTILITY
Main Advanced Boot Security Exit
Security Settings
Install or Change the password.
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
←→ Select Screen
↑↓ Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
V02.59 ©Copyright 1985-2005, American Megatrends , Inc.
Figure 6-4
53
Chapter 6
Exit menu
BIOS SETUP UTILITY
Main Advanced Boot Security Exit
Exit system setup
Exit Options
after saving the changes.
Save Changes and Exit
Discard changes and Exit
Discard Changes
F10 key can be used
for this operation.
Load Optimal Defaults
←→ Select Screen
↑↓ Select Item
Enter Go To Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
V02.59 ©Copyright 1985-2005, American Megatrends, Inc.
Figure 6-5
54
Chapter 6
Change User Password
With a User password, you can enter the Setup Utility and change or
remove the User password, but you cannot enter the Setup Utility and
change or remove the Supervisor password, nor enable diskette
access if it has been disabled.
Change Supervisor Password
A supervisor password must be set before a lower-level user
password can be set. After selecting Change Supervisor Password,
press Enter. You will be prompted for the new password, and then
again to verify it. Type in 6 or fewer keystrokes. If you make an error,
press Esc to start over.
Resetting the CMOS to Default Settings
The main page provides the system parameters for you to reset the
CMOS to default settings. After you enter this page, select the Load
Optimal Defaults:
Load Optimal Defaults?
[OK]
[Cancel]
Select [OK] to reset the CMOS to default settings.
Exiting and Saving
Save Settings
and Exit
Select this option to save changes to the field
values, and restart the computer using the new
values. (Pressing F10 from any of the menu
screens also allows you to save settings and exit.)
Exit Without
Saving
Select this option to discard any changes you have
made to the field values, and restart the computer
using the old values.
55
Appendix A
Frequently
Asked
Questions
Appendix A
Frequently Asked Questions
Q: My screen seems to time out too quickly. I have to constantly
hit a key or move the mouse in order to bring it back. How can
I adjust the screen time-out?
A: This is part of Windows Power Management. Access Power
Management by clicking on Start / Settings / Control Panel /
Power Management. Adjust the display time-out by selecting a
time next to the Turn off monitor option. You may also select
different time-out values for adapter and battery power states.
Q: I've heard that cleaning up and rearranging files on the hard
drive will improve the startup speed of my programs. How do I
do this?
A: Hard disk maintenance can improve the startup speed of programs.
This maintenance includes deleting unnecessary files, and
defragmenting, which rearranges data into more efficient groupings.
Windows includes utilities for performing these maintenance tasks.
Run Disk Cleanup to remove unnecessary files, and Disk
Defragmenter to defragment the hard drive. For more information,
refer to Windows documentation.
Q: The internal fax/modem dial tone sound is too low. How can I
increase the volume?
A: There are two methods to adjust the volume of the internal
fax/modem dial tone:
To Start/Setting/Control panel/Phone and Modem
Options/Modem/Properties/Modem/Speaker Volume Adjust.
Method 1:
Move the slider to adjust the modem speaker volume..
Method 2: Use the volume control button on the front of the
computer.
Q: What kind of external microphone can I use with my notebook
computer?
A: You will need to use a self-amplifying microphone.
Q: There is feedback noise coming from my speakers. What can I
do?
57
Appendix A
A: Double click on the Speaker icon on the task bar. Then, under
Microphone Balance, check the Mute box.
Q: Because of a software problem, I was unable to shut down
power normally. I pressed the power button to force a power
off, but it didn't work. How can I force a power off?
A: Make sure you press the power button for at least 4 seconds.
Normally, this will force a power off. If this does not work, you can
shut down the computer by inserting a needle into the reset button
pinhole. (The reset button locate on the computer bottom side.)
Q: Why can’t I charge the battery of my portable computer after it
was out of use for some time?
A: After portable computers have not been used for a long time (more
than one month), the batteries will go into the low voltage
protection mode due to data back-ups and natural electrical
discharge. At that point, restoring normal voltage will require slow
charging over a period of several hours. Calibration can be
performed after the battery has returned to a normal condition.
Q: My computer alerts “CMOS Battery Low”, what can I do?
A: If you keep your computer in no power situation (unplug the
computer from the power outlet and remove battery at the same)
over 45 days, your data in CMOS will be lost.
Please reconfigure your CMOS by following steps:
1. Press DEL to enter the BIOS setup utility.
2. Select “Load Optional Defaults?”. When you see the
following prompt, choose <OK> and then press <Enter>.
Load Optional Defaults ?
[OK]
[Cancel]
3. Select “Save Changes and Exit”. When you see the
following prompt, choose <OK> and then press <Enter> to
restart your computer.
58
Appendix A
Save configuration changes and exit setup?
[OK] [Cancel]
59
Appendix B
Statements
Appendix B
Statements
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
1. Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Shielded interconnect cables and shielded AC power cable must be
employed with this equipment to insure compliance with the pertinent
RF emission limits governing this device. Changes or modifications not
expressly approved by the system's manufacturer could void the
user's authority to operate the equipment.
Declaration of Conformity
This device complies with part 15 of the FCC rules. Operation is
subject to the following conditions:
•
•
This device may not cause harmful interference
This device must accept any interference received, including
interference that may cause undesired operation.
61
Appendix B
About The Modem
This equipment complies with Part 68 of FCC rules. On the bottom of
this equipment is a label that contains, among other information, the
FCC registration number and ringer equivalence number (REN) for
this equipment. If requested, this information must be provided to the
telephone company.
The modem jack of this equipment complies with Sub-part F of Part 68
of FCC rules.
The REN is used to determine the quantity of devices that may be
connected to the telephone line. Excessive RENs on the telephone
line may result in the devices not ringing in response to an incoming
call. In most, but not all areas, the sum of the RENs should not exceed
five (5.0). To be certain of the number of devices that may be
connected to the line, as determined by the total RENs contact the
telephone company to determine the maximum REN for the calling
areas.
If the terminal equipment causes harm to the telephone network, the
telephone company will notify you in advance that temporary
discontinuance of service may be required. However, if advance notice
isn't practical, the telephone company will notify the customer as soon
as possible. Also, you will be advised of your right to file a compliant
with the FCC if you believe it necessary.
The telephone company may mark changes in its facilities, equipment,
operations, or procedures that could affect the operation of the
equipment. If this happens, the telephone company will provide
advance notice in order for you to make the necessary modifications in
order to maintain uninterrupted service.
If trouble is experienced with this equipment, please contact the
manufacturer for repair and (or) warranty information. If the trouble is
causing harm to the telephone network, the telephone company may
request you remove the equipment from the network until the problem
is resolved.
The equipment cannot be used on public coin service provided by the
telephone company. Connection to Party Line Service is subject to
state tariffs. (Contact the state public utility commission, public service
commission or corporation commission for information.)
62
Appendix B
The Telephone Consumer Protection Act of 1991 marks it unlawful for
any person to use a computer or other electronic device, including fax
machines, to send any message unless such message clearly
contains in a margin at the top or bottom of each transmitted page or
on the first page of the transmission, the date and time it is sent and
an identification of the business or other entity, or other individual
sending the message and the telephone number of the sending
machine or such business, other entity, or individual. (The telephone
number provided may not be a 900 number or any other number for
which charges exceed local or long-distance transmission charges.)
To program this information, refer to the manual of the communication
software.
European Notice
Products with the CE Marking comply with both the EMC Directive
(89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by
the Commission of the European Community.
Compliance with these directives implies conformity to the following
European Norms:
z
z
EN 55022 ( CISPR 22 ) Radio Frequency Interference
EN 55024 ( EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,
EN61000-4-6, EN61000-4-8,EN61000-4-11, EN61000-3-2, EN61000-
3-3 ) Generic Immunity Standard
z
EN 60950 ( IEC950 ) Product Safety
R&TTE (CE) MANUAL REGULATORY REQUIREMENT
(WLAN - IEEE 802.11a/b/g)
802.11a Restrictions:
•
European standards dictate maximum radiated transmit power of
200mW EIRP and frequency range 5.15-5.35GHz, and the
equipment must be restricted to the 5.47-5.725 GHz frequency
range and must be restricted to indoor use.
802.11b/g Restrictions:
z
European standards dictate maximum radiated transmit power of
100mW EIRP and frequency range 2.400-2.4835GHz.
63
Appendix B
z
In France, the equipment must be restricted to the 2.4465-2.4835GHz
frequency range and must be restricted to indoor use."
CE Declaration of Conformity
Is herewith confirmed to comply with the requirements set out in the
Council Directive on the Approximation of the Laws of the Member
States relating to Electromagnetic Compatibility (89/336/EEC), Low-
voltage Directive (73/23/EEC) and the Amendment Directive
(93/68/EEC), the procedures given in European Council Directive
99/5/EC and 89/3360EEC.
The equipment was passed. The test was performed according to the
following European standards.
z
z
EN 300 328 V.1.4.1 (2003-04)
EN 301 489-1 V.1.4.1 (2002-04) / EN 301 489-17 V.1.2.1 (2002-
04)
z
z
EN 50371:2002
EN 60950:2000
UL CAUTION
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunication line cord.
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric shock and
injury to persons, including the following:
Do not use this product near water, for example, near a bathtub, wash
bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock from
lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.
64
Appendix B
Use only the power cord and batteries indicated in this manual. Do not
dispose of batteries in a fire. They may explode. Check with local
codes for possible special disposal instructions.
Canadian Department of Communications
This class B digital apparatus meets all requirements of the Canadian
Interference-causing Equipment Regulations.
About the Modem
The Industry Canada label identifies certified equipment. This
certification means that the equipment meets certain
telecommunications network protective, operational and safety
requirements. The department does not guarantee the equipment will
operate to the user's satisfaction.
Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local
telecommunications company.
The equipment must also be installed using an acceptable method of
connection. In some cases, the company's inside writing associated
with a single line individual service may be extended by means of a
certified connector assembly (telephone extension cord). The
customer should be aware that compliance with the above conditions
may not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized
Canadian maintenance facility designated by the supplier. Any repairs
or alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company cause to
request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic
water pipe system, if present, are connected together. This precaution
may be particularly important in rural areas.
CAUTION:
Users should not attempt to make such connections
themselves, but should contact the appropriate electric
inspection authority, or electrician, as appropriate.
65
Appendix B
"The Load Number (LN) assigned to each terminal device denotes the
percentage of the total load to be connected to a telephone loop which
is used by the device. To prevent overloading, the termination on a
loop may consist of any combination of devise subject only to the
requirement that the total of the Load Numbers of all the devices does
not exceed 100."
Battery Disposal
THIS PRODUCT CONTAINS A LITHIUM-ION OR NICKEL-METAL HYDRIDE
BATTERY. IT MUST BE DISPOSED OF PROPERLY. CONTACT LOCAL
ENVIRONMENTAL AGENCIES FOR INFORMATION ON RECYCLING AND
DISPOSAL PLANS IN YOUR AREA.
CAUTION FOR ADAPTER
THIS NOTEBOOK COMPUTER IS FOR USE WITH MODEL NO.
0335A2065.
BATTERY CAUTION
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY
THE MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE
MANUFACTURER'S INSTRUCTIONS.
CLASS 1 LASER PRODUCT
LASERSCHUTZKLASSE 1 PRODUKT TO EN60825
THIS APPLIANCE CONTAINS A LASER SYSTEM AND IS
CLASSIFIED AS A "CLASS 1 LASER PRODUCT.” TO USE THIS
MODEL PROPERLY, READ THE INSTRUCTION MANUAL
CAREFULLY AND KEEP THIS MANUAL FOR FUTURE
REFERENCE. IN CASE OF ANY TROUBLE WITH THIS MODEL,
PLEASE CONTACT YOUR NEAREST "AUTHORIZED SERVICE
STATION.” TO PREVENT DIRECT EXPOSURE TO THE LASER
BEAM, DO NOT TRY TO OPEN THIS ENCLOSURE.
CAUTION:
66
TECHNICAL SUPPORT
For the latest Drivers and Support Documents or to chat online with a
To contact Technical Support via email, send your User Name, Model,
Serial Numberand a brief Description of the issue at hand to
Name (first and last),Model (example: SA2050T) and Serial
Registration – SAXXXXX” as your email subject. Failure to register
your product does not diminish your warranty rights.
To speak with an Everex Technical Support Representative call our 24-
Hour response team at 1-866-850-8835 (toll-free)
Please complete the following information before contacting Everex
Technical Support:
User Name
Model
: _________________________________________
: _________________________________________
: _________________________________________
Serial Number
Problem Description: _________________________________________
__________________________________________________________
__________________________________________________________
Everex Systems, Inc., 5020 Brandin Court, Fremont CA 94538,
67
|