EMP Monitor Operation Guide
V4.30
Contents
3
If the projector name or IP address changes after registration. . . . . . . . . . . . 20
For projectors that have been registered manually. . . . . . . . . . . . . . . . . . . . 20
For projectors that have been registered using automatic search . . . . . . 20
Cancelling (deleting) projector registrations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Meanings of symbols used
EMP Monitor Features
Monitoring window layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Monitoring using Grouping view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Meanings of Grouping view icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Using the icons in Grouping view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Monitoring using Detail list view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Meanings of Detail list view icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Selecting display items. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Sorting lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Searching for desired icons (Projector list). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Monitoring using the system tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Displaying projectors with problem or warning statuses in a list . . . . . . . . . 27
Checking properties in detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Displaying group properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Displaying projector properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Displaying and deleting logs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Displaying logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Deleting logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
EMP Monitor Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Operating environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Compatible computers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing EMP Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Limitations imposed by a Windows Vista environment. . . . . . . . . . . . . . . . . . . . 8
Before starting operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Using EMP Monitor
Registering and deleting projectors for monitoring . . . . . . . . . . . . 10
Starting EMP Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Registering projectors using automatic search (Searching for and registering
projectors that are located in the same segment). . . . . . . . . . . . . . . . . . . . . . . . 11
Procedures for automatic search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Procedures for registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using the control functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Setting the range of addresses to do an automatic search and registration .
13
Procedures for automatic search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Procedures for registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Registration by specifying an IP address (Manual registration) . . . . . . . . . . . 17
Registering several projectors to a monitoring group all at once . . . . . . . . . 18
Carrying out control using control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Carrying out control using a web browser (Web control). . . . . . . . . . . . . . . . . 32
Carrying out control using timer settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Procedures for new timer settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
E-mail notification function settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 35
E-mail notification of problem/warning/status . . . . . . . . . . . . . . . . . 37
4
Application lock function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Switching application lock between enabled and disabled . . . . . . . . . . . . . . 39
Enabling the application lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Disabling the application lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Setting a password for cancelling application lock. . . . . . . . . . . . . . . . . . . . . . . 39
Appendix
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Projectors cannot be monitored or controlled . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
An e-mail message is not sent when a problem occurs with a projector . . 41
General Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Copyright Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
5
EMP Monitor Features
EMP Monitor Functions
6
EMP Monitor Functions
• Mail notification function settings
EMP Monitor lets you carry out operations such as checking the statuses
of multiple EPSON projectors that are connected to a network at a
computer monitor, and controlling the projectors from the computer.
Following are brief descriptions of the monitoring and control functions
that can be carried out using EMP Monitor.
You can set e-mail addresses to which notifications are sent if a status
requiring attention, such as a problem, occurs with a projector that has
been registered.
• Registering projectors for monitoring and control
Projectors on the network can be searched for automatically, and you
can then select projectors to be registered from the projectors that are
detected.
You can enter the IP addresses for target projectors to register them.
• Registered projectors can also be assigned to groups so that they can
be monitored and controlled in groups.
• Monitoring the statuses of registered projectors
The power status (ON/OFF) for projectors and problems or warnings
requiring attention can be checked visually by means of icons.
You can select groups of projectors or a single projector that you are
interested in, and then check the cumulative lamp operating time or the
details of information such as input sources, problems, and warnings
for these projectors.
To enable projectors to be monitored and controlled even when they are
*
in standby mode , make the following settings at the projectors. The
settings that need to be made will vary depending on the projector you
are using. s Projector User's Guide
• Set Network Monitoring to ON.
• Set Standby Mode to Network ON.
* When the projector's indicator is lit orange.
• Controlling registered projectors
Projectors can be selected in groups or as single projectors, and you can
then carry out operations for the selected projectors such as turning the
power on and off and switching their input sources.
Web control functions can be used to change the settings in the
projector's configuration menu.
If there are certain control actions which are carried out regularly at
particular times or on particular days, you can use Timer Settings to
register timer settings.
Operating environment
7
Operating environment
• EMP Monitor cannot be used in environments which do not allow
pings to be transmitted.
• Windows NT4.0 does not support Arabic and Hebrew versions of EMP
Monitor.
Compatible computers
• You must update Windows Vista to Windows Vista SP1 to use the
Ukrainian version of EMP Monitor.
Only Windows is supported.
OS
Windows 98 Second Edition SP1
Windows Me
Installing EMP Monitor
Windows NT4.0 SP6
Windows 2000 Professional SP4
The following 32-bit operating systems:
Windows XP Home Edition SP2 or later
Windows XP Professional SP2 or later
When you are using Windows 2000/Windows NT4.0/Windows
XP/Windows Vista, you must have administrator authority in order to
install EMP Monitor.
When the language selected for the EMP Monitor installation varies
from that of the OS being used, the EMP Monitor screens may not be
displayed correctly.
Windows Vista
(All editions except Starter Edition)
Windows Vista SP1
All editions except Starter Edition
Procedure
• Internet Explorer Ver. 5.0 or later must be installed.
A
B
C
Turn the computer on.
CPU
Pentium MMX 166 MHz or higher (Pentium II 233 MHz
or higher recommended)
To prevent problems from occurring during the installation, we
recommend that you terminate all resident applications that can be
ended.
Memory capacity 64 MB or more (128 MB or more recommended)
Free hard disk
space
50 MB or more
Load the following CD-ROM in your computer: “EPSON
Projector Software for Meeting & Monitoring” or “EPSON
Projector Software for Monitoring”.
Display
SVGA (800 X 600) or higher resolution, 32 bit or higher
display colour
The installer automatically starts up.
• Macintosh computers cannot be used.
• Operations carried out at the computer may become slow depending
on the number of projectors being managed. If this happens, use a
computer with higher specifications.
From here, continue with the installation by following the
on-screen messages.
Operating environment
8
Limitations imposed by a Windows Vista
environment.
Before starting operations
Check the following points before starting up EMP Monitor.
• EMP Monitor must be installed on the computer to be used for
monitoring and control.
When using EMP Monitor under Windows Vista, note the following
limitations.
• The computer and the projectors must be connected to the network.
• If using Windows 2000/Windows NT4.0/Windows XP/Windows
Vista, the computer must be started up in Administrator mode.
• Depending on the projector model, a commercially-available serial
TCP/IP conversion adapter and a connection cable are required in
order to use EMP Monitor. s Projector User's Guide "
Make the settings for the serial TCP/IP conversion adapter before
connecting to the projector.
• You must have administrator authority in order to use Register at
startup on the Environment setup screen of EMP Monitor.
• Even after EMP Monitor has been uninstalled, the settings and log
information will remain on the hard disk. If this information is no
longer required, you may delete the EMP Monitor V4.30 folder.
Provided the default settings were used at installation, this folder can be
found at:
"C:\Users\(User Name)\AppData\Local\VirtualStore\Program
Files\EPSON Projector\EMP Monitor V4.30"
9
Using EMP Monitor
Registering and deleting projectors for monitoring
10
Registering and deleting projectors for monitoring
B
The main window will be displayed.
This operation is carried out when starting EMP Monitor for the first
time after it has been installed and when you would like to add
projectors. Once a projector has been registered, the status for the
projector will be displayed automatically each time EMP Monitor is
started from that point onwards.
The area described in red box is referred to as Grouping view.
Starting EMP Monitor
Procedure
A
Click Start - Programs (or All Programs) - EPSON Projector -
EMP Monitor V4.30 in that order to start EMP Monitor.
The operations to register projectors using the automatic search will vary
depending on where the projectors are connected to in the network.
• When registering a projector that is located in the same segment as the
computer in which EMP Monitor is installed. s "Registering
projectors using automatic search (Searching for and registering
projectors that are located in the same segment)" p.11
• When registering projectors that are in multiple segments of the
network. s "Setting the range of addresses to do an automatic search
and registration" p.13
Registering and deleting projectors for monitoring
11
B
Click "Search".
Registering projectors using automatic search
(Searching for and registering projectors that are
located in the same segment)
Automatic searching will be carried out, and the names of the pro-
jectors that have been detected will be displayed.
If a projector does not appear in the list, use "Registration by spec-
ifying an IP address (Manual registration)". s p.17
Procedures for automatic search
Procedure
A
Right-click in Grouping view and select "New" - "Projector
(automatic search)".
The Create new projector (automatic registration) window will be
displayed.
If Detail list view is displayed, select "New" - "Projector (automatic
search)" from the Edit menu.
• You can also carry out this operation by selecting New - Projector
(automatic search) from the Edit menu.
• Projectors that are using a serial TCP/IP conversion adapter cannot be
detected.
Registering and deleting projectors for monitoring
12
Procedures for registration
Display name Enter the name of the projector(s) to be displayed in
Grouping view or Detail list view.
Procedure
Up to a maximum of 32 bytes can be entered. A space
cannot be used as the first character.
A
Select the projector(s) to be registered from the displayed
list, and then click "Edit".
Display icon
Parent group
Select the icon(s) to be displayed in Grouping view or
Detail list view.
The following window will be displayed.
Select when registering a projector in a group.
If no groups have been created, this cannot be selected.
s "Registering several projectors to a monitoring
group all at once" p.18
Projector
name
This shows the name that has been registered on the
projector.
IP address
This shows the IP address for the registered projector.
Use Serial
TCP/IP
This cannot be selected when registering projectors
using automatic search.
conversion
adaptor.
Port Number
This cannot be selected when registering projectors
using automatic search.
Monitor
Password
If a Monitor Password has been set for the projector, be
sure to enter the Monitor Password that has been set. If
the correct password is not entered at this time, it will
not be possible to monitor and control the projector
even though it is registered.
Description
Monitor
You can enter some kind of memo about the projector.
The details you enter here will be displayed at the
projector properties.
Up to a maximum of 60 bytes can be entered.
Select this when you want monitoring to start.
Make the necessary settings while referring to the following table.
Registering and deleting projectors for monitoring
13
B
After entering the details, click "Register" to start the
registration. When the message is displayed, click "OK".
B
Select the "Specify an address range and search" check box
and then enter "Start address" and "End address" in the
range.
To continue registering other projector(s), repeat Steps 1 and 2.
Projectors that have been registered using automatic search are
searched for again by projector name each time EMP Monitor is
started.
C
To end the registration operation, click
corner of the window or click "Cancel".
in the top-right
The icon(s) of the projector(s) you registered will be displayed in
Grouping view or Detail list view.
Refer to s "Monitoring window layout" p.21 for details on using
the Grouping view and Detail list view.
Setting the range of addresses to do an automatic
search and registration
Projectors that are using a serial TCP/IP conversion adapter cannot be
detected.
Procedures for automatic search
Procedure
A
Right-click in Grouping view and select "New" - "Projector
(automatic search)".
The Create new projector (automatic registration) window will be
displayed.
If Detail list view is displayed, select New - Projector (automatic
search) from the Edit menu.
Registering and deleting projectors for monitoring
14
C
Click "Search".
Automatic searching will be carried out, and the names of the pro-
jectors that have been detected will be displayed.
Registering and deleting projectors for monitoring
15
Procedures for registration
Display name Enter the name of the projector(s) to be
displayed in Grouping view or Detail list view.
Procedure
Up to a maximum of 32 bytes can be entered. A
space cannot be used as the first character.
A
Select the projector(s) to be registerd from the displayed list,
and then click "Edit".
Display icon
Parent group
Select the icon(s) to be displayed in Grouping
view or Detail list view.
The following window will be displayed.
Select when registering a projector in a group.
If no groups have been created, this cannot be
selected. s "Registering several projectors to a
monitoring group all at once" p.18
Projector
name
This shows the name that has been registered on
the projector.
IP address
This shows the IP address for the registered
projector.
Use Serial
TCP/IP
This cannot be selected when registering
projectors using automatic search.
conversion
adaptor.
Port Number
This cannot be selected when registering
projectors using automatic search.
Monitor
Password
If a Monitor Password has been set for the
projector, be sure to enter the Monitor Password
that has been set. If the correct password is not
entered at this time, it will not be possible to
monitor and control the projector even though it
is registered.
Description
Monitor
You can enter some kind of memo about the
projector. The details you enter here will be
displayed at the projector properties.
Make the necessary settings while referring to the following table.
Up to a maximum of 60 bytes can be entered.
Select this when you want monitoring to start.
Registering and deleting projectors for monitoring
16
B
C
After entering the details, click "Register" to start the
registration. When the message is displayed, click "OK".
To continue registering other projector(s), repeat Steps 1 and 2.
To end the registration operation, click
corner of the window or click "Cancel".
in the top-right
The icon(s) of the projector(s) you registered will be displayed in
Grouping view or Detail list view.
Refer to s "Monitoring window layout" p.21 for details on using
the Grouping view and Detail list view.
Registering and deleting projectors for monitoring
17
You can also carry out this operation by selecting New - Projector
Registration by specifying an IP address (Manual
registration)
(manual registration) from the Edit menu.
B
Enter the IP address of the projector to be registered in the
"IP address" box and then click "Search". When the message
is displayed, click "OK".
Procedure
A
Right-click in Grouping view and select "New" - "Projector
If using a serial TCP/IP conversion adapter and cable to connect
the projector, select Use Serial TCP/IP conversion adaptor. Enter
the port number in Port Number and then click Search.
(manual registration)".
The following window will be displayed.
If Detail list view is displayed, select "New" - "Projector (manual
registration)" from the Edit menu.
C
After searching is complete, enter the information for the
projector to be registered while referring to the table below.
Display name Enter the name of the projector(s) to be displayed
in Grouping view or Detail list view. Up to a
maximum of 32 bytes can be entered. A space
cannot be used as the first character.
Display icon
Parent group
Select the icon(s) to be displayed in Grouping
view or Detail list view.
Select when registering a projector in a group. If
no groups have been created, this cannot be
selected.
s "Registering several projectors to a
monitoring group all at once" p.18
Projector
name
This shows the name that has been registered on
the projector.
IP address
This shows the IP address that you entered in step
2.
Use Serial
TCP/IP
Select this if using a serial TCP/IP conversion
adapter to connect the projector.
conversion
adaptor.
Registering and deleting projectors for monitoring
18
Port Number
If using a serial TCP/IP conversion adapter to
connect the projector, enter the port number.
Registering several projectors to a monitoring group
all at once
Monitor
Password
If a Monitor Password has been set for the
projector, be sure to enter the Monitor Password
that has been set. If the correct password is not
entered at this time, it will not be possible to
monitor and control the projector even though it
is registered. If using a serial TCP/IP conversion
adapter to connect the projector, the Monitor
Password security function cannot be used.
Projectors that have been registered can then be registered together into
different groups so that they can be monitored and controlled together.
Furthermore, if you select one of the registered groups as the Parent
group, monitoring and control operations can be carried out for all
projectors in that Parent group.
A Parent group can be set for other parent groups, so that a hierarchical
group arrangement can be created.
First, create the registration groups, and then register projectors into the
groups that have been created.
Description
Monitor
You can enter some kind of memo about the
projector. The details you enter here will be
displayed at the projector properties.
Up to a maximum of 60 bytes can be entered.
Select this when you want monitoring to start.
D
After entering the details, click "Register" to start the
registration. When the message is displayed, click "OK".
The icon(s) of the projector(s) you registered will be displayed in
Grouping view or Detail list view.
Registering and deleting projectors for monitoring
19
Procedure
from the Edit menu.
A
Right-click in Grouping view and select "New" - "Group".
The following window will be displayed.
Make the necessary settings while referring to the table below.
If Detail list view is displayed, select New - Group from the Edit
menu.
B
C
When the setup is complete, click "Register" to start the
registration. When the message is displayed, click "OK".
The icon(s) of the projector(s) you registered will be displayed in
Grouping view or Detail list view.
Right-click the projector icon(s) to register to the group you
have created in Grouping view or Detail list view, and select
"Edit".
You can also carry out this operation by selecting Edit in the Edit
menu.
D
In the Edit projector window, select the group name to use
for registering in Parent group and then click "Change".
The status of the group registration will be displayed as an icon in
Grouping view or Detail list view.
Group name
Enter the name of the group to be displayed in
Grouping view or Detail list view.
The registration details can also be checked using Projector list in
the View menu.
Up to a maximum of 32 bytes can be entered. A
space cannot be used as the first character.
Display icon
Parent group
Monitor
Select the icon(s) to be displayed in Grouping
view or Detail list view.
This selects the parent group. If no groups have
been created, this cannot be selected.
Select this to monitor all projectors that have
been registered in the group. If this is not
selected, the settings made when the individual
projectors were registered will be used.
It cannot be set when creating a new group.
You can also carry out this operation by selecting New - Group
Registering and deleting projectors for monitoring
20
B
Carry out automatic search to re-register the projector(s).
s p.11
If the projector name or IP address changes after
registration
Cancelling (deleting) projector registrations
For projectors that have been registered manually
The registrations for projectors can be deleted if they are no longer
required for monitoring or control using EMP Monitor.
Procedure
A
Right-click on a projector icon in Grouping view or Detail list
view and select "Monitoring disabled". Then right-click the
projector icon again and select "Edit".
Procedure
Right-click the icon for the projector or group that is to be deleted
in Grouping view or Detail list view and select "Delete". When the
message is displayed, click "OK".
You can also carry out these operations by using the Edit menu.
B
If only the projector name has been changed, click "Search"
in the Edit projector window that is displayed. If the IP
address has been changed, enter the new IP address in the
"IP address" box and then click "Search". When the message
is displayed, click "OK".
More than one projector can be selected for deleting by selecting in
Grouping view or Detail list view.
The methods of selecting more than one projector at the same time are as
follow.
• If you select a group icon in Grouping view, all projectors that have
been registered in that group will be deleted at the same time.
C
When the display returns to the Edit projector window, click
"Change".
• Hold down the Ctrl key on the keyboard while clicking on the desired
icons.
• Use drag and drop to select a range of desired icons.
You can also carry out this operation by selecting Delete in the Edit
menu.
For projectors that have been registered using automatic
search
Procedure
A
Delete the projector(s) whose name or IP address has been
changed in Grouping view or Detail list view. s p.20
Monitoring window layout
21
Monitoring window layout
• How to switch views
Grouping view and Detail list view are switched as follows.
You can monitor using either of the window layouts below.
• Grouping view
This view lets you check the status of group registrations in a
hierarchical diagram.
Procedure
Click the View menu, and select "Grouping view" or "Detail list
view".
Monitoring using Grouping view
Meanings of Grouping view icons
In Grouping view, the patterns on the icons indicate the statuses of the
projectors. If the group icons are round in shape, it indicates that there is
another level below them. s p.22
Grouping view
• Detail list view
This view lets you display the status of each projector as a list so that the
projectors can be checked in detail. You can also display specific items
as a list, and sort display items using a specific row as a sort key.
Detail list view
Monitoring window layout
22
The icon patterns and their meanings are explained below.
Projector
Network error (monitor password authentication error)
No Monitor Password was entered when the projector was
Group
No warnings or problems
All projectors in the group are normal.
Warning or problem
registered, or an incorrect Monitor Password was entered.s p.12,
p.15, p.17
*2
Network error (TCP connection error)
A projector in the group has a warning or problem status.
Notification
*3
Network error (ESC/VP.net communication error)
A projector requiring immediate attention has been detected
within the group.
*1 When Temperature level display group view is set to On at Environment
setup in the Tool menu, an icon indicating the internal temperature of the
projector will be displayed on top of the projector icon. The default setting
is Off. As you can get an idea of how the temperature inside the projector is
increasing when the temperature level is displayed, you can make
Monitoring disabled
The projector is not being monitored. If you right-click the icon and
select Monitoring enabled, the projector will be added to the
projectors that are being monitored.
Data being updated
improvements to the projector's operating environment before a high
internal temperature error or high-temperature warning occur. s p.27
*2 Check the following items.
- Check that the projector's power is turned on.
- Check that the LAN cable is connected.
- Check that Network Monitoring is set to ON or Standby Mode is set to
Network ON in the projector's configuration menu.
Projector
*1
No warnings or problems
Warning or problem
Notification
*3 Check that the projector has been correctly connected to the network.
The projector information that is generated when a problem is detected
is stored until EMP Monitor is closed. EMP Monitor displays will not be
updated automatically even if the projector status returns to normal.
Click "Refresh" in the main window to update the status.
Monitoring disabled
Data being updated
Using the icons in Grouping view
The following icon operations can be carried out in Grouping view.
Monitoring window layout
23
• Expanding and collapsing icons
Each time you double-click a group icon, the icons for the projector
that have been registered in that group are displayed or hidden.
• Moving icons
To change the position of an icon within Grouping view, simply drag
and drop the icon to be moved.
Monitoring using Detail list view
Meanings of Detail list view icons
The status of registered projectors is displayed as a list in Detail list view
regardless of which groups the projectors belong to.
Monitoring window layout
24
The icon patterns and their meanings are explained below.
Internal temperature
normal
High-temperature
warning
Type: Displays the projector status.
Internal temperature
normal
Internal temperature error
*1
No warnings or problems
Warning or problem
High-temperature
warning
An error has occurred on the projector.
Notification
Error information: Shows a notification or warning/problem status using
the following icons.
The projector requires immediate attention.
Monitoring disabled
Clean Air Filter Notice
Lamp Cover Open
Lamp Error
The projector is not being monitored. If you right-click the icon and
select Monitoring enabled, the projector will be added to the
projectors that are being monitored.
*4
Replace Lamp
High-temperature warning
Replace Air Filter
No Air Filter
Lamp failure at power on
High internal temperature error
Internal Error
Data being updated
Network error (monitor password authentication error)
No Monitor Password was entered when the projector was registered,
or an incorrect Monitor Password was entered. s p.12, p.15, p.17
*2
Network error (TCP connection error)
Low Air Flow
Fan error
*3
Network error (ESC/VP.net communication error)
Air Flow Sensor Err.
Low air flow error
Sensor error
Group name: When projectors are registered to a group, the name of the
group that the projector belongs to is displayed.
Supply System Error (Ballast)
Auto Iris Error
Display name: Shows the display name.
Air filter air flow sensor error
Other error
Power: Shows the power on status for the projector.
Power on and normal status
Power off and normal status
Power on and abnormal status
Power off and abnormal status
Lamp Hours: Shows the lamp operating time for the projector.
Temperature level: The following five icons display the differing internal
temperature status of the projector.
Monitoring window layout
25
*1 When Temperature level display group view is set to On at Environment
setup in the Tool menu, an icon indicating the internal temperature of the
projector will be displayed on top of the projector icon. The default setting
is Off.
Procedure
A
Select "Option" from the View menu.
The Option window will be displayed.
*2 Check the following items.
- Check that the projector's power is turned on.
- Check that the LAN cable is connected.
- Check that Network Monitoring is set to ON or Standby Mode is set to
Network ON in the projector's configuration menu.
*3 Check that the projector has been correctly connected to the network.
*4 You can display Replace lamp at any time preset at Environment setup in
the Tool menu.
• The projector information that is generated when a problem is detected
is stored until EMP Monitor is closed. EMP Monitor displays will not
be updated automatically even if the projector status returns to normal.
Click "Refresh" in the main window to update the status.
• Detectable error information differs with the projector you are using.
Selecting display items
You can select only the required items to be displayed in Detail list view.
B
C
D
Select the check box of the item you want to display.
Click "OK".
When all of the details of the item cannot be displayed in
Detail list view, drag the boundary line on the right of the
item name so that the view is extended to the desired width.
Monitoring window layout
26
With Projector list, temperature level icons are not displayed regardless
of the setting of Temperature level display group view at Environment
setup.
The Projector list lets you check the registration details for groups in a
hierarchical diagram. When you click on an icon, Grouping view and
Detail list view are scrolled so that the selected icon is displayed in the
window.
Sorting lists
You can sort detailed lists by using a specific row as a sort key, such as
projector name order or IP address order.
Procedure
Click the item name of the row you want to use as the sort key.
Monitoring using the system tray
Searching for desired icons (Projector list)
The projector statuses are always displayed as icons in the system tray,
even when Grouping view or Detail list view is not always displayed, and
the statuses can be checked by the icon patterns.
When the configuration menus are set using the following operations, an
icon appears in the system tray and the status can be monitored by means
of the icon's pattern.
The Projector list feature is useful for searching in lists when many
groups and projectors are registered and the icon you are looking for is
not displayed on screen.
Procedure
Select "Projector list" from the View menu.
The following window will be displayed.
The icon patterns are explained below.
No problem
Problem
Procedure
A
Select "Environment setup" from the Tool menu.
The Environment setup window will be displayed.
Monitoring window layout
27
B
Select "Resident in the task tray".
Displaying projectors with problem or warning
statuses in a list
You can display a list of only the projectors which have a problem or
warning status.
Procedure
Select "Warning and Error Projector list" from the View menu.
The following Warning and Error Projector list window will be
displayed.
If you move the mouse pointer over the icon of the Error information,
details of the error and the remedy will be displayed. If you double-click
in a line, the properties for that projector will be displayed. s p.29
C
Click "OK".
• Right-click the icon in the system tray to open a pop-up menu to select
the Open the main screen or Exit.
• If Register at start up in the Environment set up is selected, EMP
Monitor starts automatically when the computer's power is turned on.
When using EMP Monitor under Windows Vista, you must have
administrator authority in order to use this function.
Monitoring window layout
28
The icon patterns and their meanings are explained below.
Error information: Shows the warning or problem status using the
following icons.
Type: Shows the group or projector status.
Display name: Shows the display name.
*
Replace Lamp
Lamp Error
High-temperature warning
Replace Air Filter
No Air Filter
Lamp failure at power on
Power: Shows the power on status for the projector.
High internal temperature error
Internal Error
Power on and normal status
Power off and normal status
Power on and abnormal status
Power off and abnormal status
Low Air Flow
Fan error
Lamp Hours: Shows the lamp operating time for the projector.
Air Flow Sensor Err.
Low air flow error
Air filter air flow sensor error
Lamp Cover Open
Sensor error
Source: Shows the input source that has been selected for the projector.
Supply System Error (Ballast)
Auto Iris Error
Computer or Computer1
DVI or HDMI (Digital)
Other error
Computer2
D-Video
*
You can display Replace lamp at any time preset at Environment setup in
the Tool menu.
BNC
Easy MP
USB Display
USB
Detectable error information differs with the projector you are using.
S-Video
Video(RCA)
Video(BNC)
Checking properties in detail
LAN
You can check the properties of groups and projectors in detail.
Temperature level: The following five icons display the differing internal
temperature status of the projector.
Displaying group properties
Internal temperature
normal
High-temperature
warning
Procedure
Internal temperature
normal
Internal temperature error
You can use either of the following methods to display the proper-
ties.
High-temperature
warning
• Displaying the properties for all groups in Grouping view
Right-click in Grouping view and select Property.
Monitoring window layout
29
• Displaying properties for specified groups
Right-click an icon in Grouping view and then select Property.
Displaying projector properties
Right-click on a projector icon in Grouping view or Detail list view and
select Property.
A
B
If you double-click in a line, the properties for that group or projector
will be displayed.
Shows the projector's serial number. If hyphens are displayed, confirm
the serial number on the label of the projector.
1
2
Displays the projector firmware version.
Displaying and deleting logs
In your web browser, you can check a transmission log of content such as
what has been controlled by EMP Monitor, projector errors. You can
delete logs once you have checked them.
Monitoring window layout
30
When Log output is set to On at Environment setup in the Tool menu,
transmission logs are stored. The default setting is Off.
Displaying logs
Procedure
Select "Log" - "View" from the View menu.
The web browser will open and the communication logs up until that
time will be displayed.
Deleting logs
Procedure
Select "Log" - "Delete" from the View menu. When the confirma-
tion message is displayed, click "OK".
All logs will be deleted and details of EMP Monitor control operations
and details of projector errors from that point onward will be recorded in
a new log.
Using the control functions
Using the control functions
31
Carrying out control using control buttons
Click the icon of a projector to be controlled in Grouping view or Detail
list view, and click a control button to enable control of only that selected
projector.
You can also enable control of all selected projectors by selecting more
than one projector in Grouping view or Detail list view and clicking a
control button. The methods of selecting more than one projector at the
same time are as follow.
• If you select a group icon in Grouping view, all projectors that have been
registered in that group and that are set to be monitored can be
controlled at the same time.
• Hold down the Ctrl key on the keyboard while clicking on the desired
icons.
• Use drag and drop to select a range of desired icons.
Using the control functions
32
*
If the button does not function, you can switch the input source using the
EasyMP control button.
The following table shows the meanings of the control buttons.
Power On
Power Off
Turns the projector power on.
Turns the projector power off.
• Some connected projectors may not be equipped with all of the above
ports or functions. If you click a button for a port or function that is not
available, nothing will happen.
• You can select objects to be controlled and use the control buttons to
carry out control operations even when the following are being
displayed.
Switch source
Computer1
Switches the video input source to the
Computer1 port or Computer port.
Switch source
Computer 2
Switches the video input source to the
Computer2 port.
Group properties s p.28
Projector properties s p.29
Switch source
BNC
Switches the video input source to the BNC
port.
Warning and Error Projector list
(Control operations can only be carried out for projectors with a
warning status.) s p.27
Switch source
S-Video
Switches the video input source to the
S-Video port.
Switch source
Video (RCA)
Switches the video input source to the Video
port or video2 port.
Switch source
Video (BNC)
Switches the video input source to the Video1
port.
Carrying out control using a web browser (Web
control)
Switch source
DVI, HDMI
Switches the video input source to the DVI
port or HDMI port.
You can use the computer's web browser to change the configuration
menu settings for projectors.
Switch source
D-Video
Switches the video input source to the D4
port.
Procedure
Switch source
EasyMP
Switches to EasyMP or EasyMP.net.
A
B
Right-click on the icon of a projector to be controlled in
Grouping view or Detail list view and select "Web control".
Switch source
USB Display
Switches to USB Display.
*
Switch source
Switches the video input source to the
external equipment connected via a USB
(Type A) port.
The web browser will open and the Web control window will
be displayed.
*
USB
Web control lets you set the same details as the configuration menu for
the projector. s Projector User's Guide
Switch source
Switches the video input source to the image
currently projected by EMP NS Connection.
*
LAN
Using the control functions
33
You can select projectors and right-click on them to select Web control
even when the following are being displayed.
Group properties s p.28
Warning and Error Projector list (Control operations can only be carried
out for projectors with a warning status.) s p.27
The line colors in the Timers list have the following meanings:
Current day's timer setting
When some of the projectors in the group have timer setting
enabled and others have it disabled for the current day's timer
setting
When the current day's timer setting is a disabled setting
Timer setting for a day other than the current day
Carrying out control using timer settings
The details that can be checked and operations that can be carried out at
this time are given below.
This is useful for carrying out certain control operations such as turning
a projector's power on and off at specified times every day or every week.
Timer settings can be carried out either for a single projector only, or all
at once for all projectors in a group.
Projectors
Selects a group or projector to check the status of.
When a group is selected, the timer setting statuses for all
projectors in that group are displayed.
Procedure
Date
Shows the current day in a red box.
Days for which timer settings have been made are shown
in bold.
Select "Timer" - "Timer Settings" from the Tool menu.
The following window will be displayed and you can then check the timer
setting status.
Click
or
to switch to the calendar for the previous
or next month.
Timers
Shows a list of the timer settings.
Enabled/disab Switches the timer settings that have been selected from
led
the timer list between enabled and disabled.
Add
Registers new timer settings. s "Procedures for new
timer settings" p.34
Edit
Lets you change the timer settings that have been
selected from the timer list. If a group has been selected
for status checking, the settings cannot be changed.
Delete
Lets you delete timer settings that have been selected
from the timer list.
Using the control functions
34
B
After completing the timer settings, click "OK".
Procedures for new timer settings
The timer settings that have been made will be registered and they
can be checked in the displayed timer list.
Procedure
You can enable and disable all of the timer settings that have been
registered. Select Timer - Enable or Disable from the Tool menu.
A
Click "Add" on the timer setting window. The following
window is displayed and the new timer settings are applied.
At Operation, you can carry out the operations of turning the pow-
er on and off and switching the input sources, similarly for the con-
trol buttons on the main window. If you set the input source
switching, the projector's power will turn on at the timer start time
even if it is not on at the time. Because of this, it is not necessary to
make two separate timer settings for turning the power on and
switching the input source.
E-mail notification function settings
35
E-mail notification function settings
B
The Set mail notification function window will be displayed.
The mail notification function can be used to send corresponding
notification messages to a preset e-mail address when a projector that is
connected to the network assumes a certain status, or if it experiences a
problem or warning. By using this function, the operator can be notified
of a projector’s status or problems even when the operator is in a
different location from the projectors.
• Up to three addressees (destinations) can be registered and messages
can be sent to all of them at once.
• If a critical problem develops with a projector which causes it to
suddenly stop working, it may not be possible for the projector to send
a message notifying an operator of the problem.
• If Standby Mode is set to Network ON or Network Monitoring is set to
ON in the projector configuration menus, you can monitor the
projector even when it is in standby mode (when its power is turned
off). s Projector User's Guide
• On some projectors, the mail notification function can be set in the
configuration menu. When notification messages are set to be sent in
the projector's configuration menu, both the settings in the
configuration menu and settings made on EMP Monitor are
functional.
Make the necessary settings while referring to the table below.
Mail notification
function
Set to ON to use the mail notification function.
SMTP server IP
address
Enter the IP address of the SMTP server. Up to
a maximum of 255 bytes can be entered.
When you change a port number of the SMTP
server, specify this port number. The default
value is "25".
You can enter a valid number from 1 to 65535.
• Detectable status with the mail notification function differs with the
projector you are using.
Sender mail
address
Enter the sender's e-mail address. Up to a
maximum of 255 bytes can be entered.
Procedure
Recipient mail
address 1
Specify the destination addresses for the
notification e-mail. Up to three destinations
can be set. Up to a maximum of 255 bytes can
be entered.
A
Select "Mail notification function" from the Tool menu.
Recipient mail
address 2
Recipient mail
address 3
E-mail notification function settings
36
C
Click "Notification event" and check the items for mail
notification in the window that appears.
D
E
Click "OK".
The Set mail notification function window appears again.
Repeat Steps 3 and 4 to set the notification events to be notified.
When the setup is complete, click "OK".
E-mail notification of problem/warning/status
37
E-mail notification of problem/warning/status
The details contained in the e-mail message can consist of the following.
If the projector experiences a problem or enters a status requiring
attention, an e-mail like that shown below is sent to the address specified
for Recipient mail address.
If there is more than one problem, warning, or status, the corresponding
messages are output to separate lines.
Message
Internal Error
Fan error
Remedy
s Projector User's Guide
Sensor error
Lamp Cover Open
Item
Details shown
Lamp failure at power
on
E-mail subject
[Display name displayed in Grouping view or Detail
list view] Projector status notification
Lamp error
Body
<Display name displayed in Grouping view or Detail
list view> has entered the following status.
High internal
temperature error
<Warning/error/status message (Please see the
table below)>
Low air flow error
Air filter air flow
sensor error
High-temperature
warning
Replace Lamp
Replace Air Filter
No Air Filter
Low Air Flow
Air Flow Sensor Err.
Clean Air Filter Notice
No signal
No image signals are being received by the
projector. Check the connection status and check
that the power for the connected equipment is
turned on.
E-mail notification of problem/warning/status
38
Message
Other error
Remedy
Stop using the projector, disconnect the power
cable from the electrical outlet, and contact
Epson.s Projector's User's Guide
Supply System Error
(Ballast)
Auto Iris Error
Network error (TCP
connection error)
Check that the projector's power is turned on and
the LAN cable is connected, and also check that
Network Monitoring is set to ON and Standby Mode
is set to Network ON. s Projector User's Guide
Network error
(ESC/VP.net
Check that the projector has been correctly
connected to the network. s Projector User's
communication error) Guide
Network error
Check the projector's Monitor Password.
(monitor password
authentication error)
Messages to inform that the projector has recovered from the error or
warning statuses are sent.
Application lock function
39
Application lock function
B
The password entry window will be displayed, so enter the
You can use the application lock to prevent third parties from operating
the projectors using EMP Monitor and from changing settings without
authority. Opening and closing EMP Monitor and status monitoring can
still be carried out even when the application lock is applied.
set password and then click "OK".
If no password has been set (default setting), click OK without en-
tering a password. It is recommended that you enter a password in
order to strengthen security.
In addition, when a password has been set, the password must be entered
in order to cancel the application lock. This ensures that the application
lock can not be easily cancelled, and thus improves system security.
The application lock will be cancelled and operations can be carried
out as normal.
Setting a password for cancelling application lock
Switching application lock between enabled and
disabled
Carry out the following operations while application lock is cancelled.
Procedure
Enabling the application lock
Procedure
A
Select "Environment setup" from the Tool menu.
The Environment setup window will be displayed.
B
C
Select "Change the application lock password".
Select "Application lock" from the Tool menu.
The application lock will be enabled and no operations will be possible
other than opening and closing EMP Monitor and disabling the
application lock.
Enter the password in both the "New password" and "New
password (confirm)" boxes and then click "OK".
The password can be up to 16 bytes in length. Single-byte alphanumeric
characters can be used.
Disabling the application lock
Procedure
A
Select "Application unlock" from the Tool menu.
40
Appendix
Troubleshooting
41
Troubleshooting
An e-mail message is not sent when a problem occurs
with a projector
Projectors cannot be monitored or controlled
Cause
Remedy
Cause
Remedy
Is the projector connected Check that the network cable has been
to the network correctly? connected correctly. If the cable is not
connected correctly, reconnect it.
Is the projector connected Check that the network cable has been
to the network correctly? connected correctly. If the cable is not
connected correctly, reconnect it.
Has the projector been set Check the settings for the Network
up correctly for
connection to the
network?
configuration menu command.
Has the projector been set Check the settings for the Network
up correctly for
connection to the
network?
configuration menu command.
s Projector User's Guide
s Projector User's Guide
Have the SMTP server IP
address, port number and
recipient e-mail address all
been set correctly?
Check the setting details.
Has EMP Monitor been
Uninstall EMP Monitor and then re-install it.
installed on the computer s p.7
correctly?
Is the projector's Network In order to use the mail notification function
Monitoring or Standby when the projector is in standby mode, the
Mode configuration menu projector's Network Monitoring or Standby
set to ON or Network ON? Mode configuration menu must be set to ON
or Network ON.
Are all the projectors that Register the projectors. s p.10
you want to control or
monitor registered?
Is the projector's Network In order to use EMP Monitor to monitor and
Monitoring or Standby
control the projector when it is in standby
s Projector User's Guide
Mode configuration menu mode, the projector's Network Monitoring or
set to ON or Network ON? Standby Mode configuration menu must be
set to ON or Network ON.
Has a critical problem
developed causing the
projector to momentarily
stop working?
When the projector has momentarily stopped
working, it cannot send e-mail messages.
s Projector User's Guide
If the projector cannot be reset even after it
has been checked, contact Epson.
s Projector User's Guide
Is power being supplied to Check if the power supply to the location
the projector?
where the projector is set up has been
interrupted, or if the circuit breaker for the
electrical outlet that the projector is
connected to has been tripped.
General Notices
General Notices
42
Trademarks
Windows, Windows NT, Windows Vista are trademarks of Microsoft
Corporation in the United States of America and other countries.
Macintosh is a registered trademark of Apple Computer, Inc.
Pentium is a registered trademark of Intel Corporation.
EasyMP and EasyMP.net are trademarks of Seiko Epson Corporation.
Other product names used herein are also for identification purposes
only and may be trademarks of their respective owners. Epson disclaims
any and all rights in those marks.
©SEIKO EPSON CORPORATION 2009. All rights reserved.
2/09
CPD-27479
Copyright Notice
All rights reserved. No part of this publication may be reproduced, stored
in a retrieval system, or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording, or otherwise, without
the prior written permission of Seiko Epson Corporation. No patent
liability is assumed with respect to the use of the information contained
herein. Neither is any liability assumed for damages resulting from the
use of the information contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the
purchaser of this product or third parties for damages, losses, costs, or
expenses incurred by the purchaser or third parties as a result of:
accident, misuse, or abuse of this product or unauthorized modifications,
repairs, or alterations to this product, or (excluding the U.S.) failure to
strictly comply with Seiko Epson Corporation's operating and
maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or
problems arising from the use of any options or any consumable
products other than those designated as Original Epson Products or
Epson Approved Products by Seiko Epson Corporation.
This information is subject to change without notice.
|