19” wide screen
User Manual
LCD Monitor
English
Deutsch
Français
Italiano
Español
日本语
简中
繁中
Pycckuu
Congratulations!
The display you have just purchased carries the
TCO’03 Displays label. This means that your
display is designed, manufactured and tested
Emissions
Electromagnetic fields
Noise emissions
according to some of the strictest quality and
environmental requirements in the world. This
makers for a high performance product, designed with the user in focus that also
minimizes the impact on our natural environment.
Ecology
The product must be prepared for recycling and the manufacturer must have a
certified environmental management system such as EMSA or ISO 14001
Some of the features of the TCO’03 Display requirements:
Restrictions on
○ chlorinated and brominated flame retardants and polymers
○ heavy metals such as cadmium, mercury and lead.
Ergonomics
Good visual ergonomics and image quality in order to improve the working
environment for the user and to reduce sight and strain problems. Important
parameters are luminance, contrast, resolution, reflectance, color rendition and
image stability.
The requirements included in this label have been developed by TCO
Development in cooperation with scientists, experts, users as manufacturers all
over the world. Since the end of the 1980s TCO has been involved in influencing
the development of IT equipment in a more user-friendly direction. Our labeling
system started with displays in 1992 and is now requested by users and
IT-manufacturers all over the world.
Energy
Energy-saving mode after a certain time – beneficial both for the user and the
environment
Electrical safety
For more information, please visit
PRECAUTIONS
“ The display unit is an electric device which may contain hazardous materials/
Power connection
components and that needs to be taken care of at end of life according to a procedure.”
1.Use the correct power cord for your local voltage.
2.Use an accessible outlet close to the monitor.
For detailed recycling procedure, please visit
3.Do not allow anything to rest on the power cable.
4.Only use the power adapter attached to the monitor.
5.Disconnect the power cable from the power supply if:
5.1 You will not use the monitor for an extended period.
5.2 The cable is damaged or frayed.
Information for users applicable in European Union countries
The symbol on the product or its packaging signifies that this product has to be
disposed separately from ordinary household wastes at its end of life. Please
kindly be aware that this is your responsibility to dispose electronic equipment
at recycling centers so as to help conserve natural resources. Each country in
the European Union should have its collection centers for electrical and
electronic equipment recycling. For information about your recycling drop off
area, please contact your local related electrical and electronic equipment
waste management authority or the retailer where you bought the product.
5.3 The monitor has been dropped or the cabinet damaged.
5.4 A distinct change in performance indicates a need for servicing.
Maintenance
1.Clean the cabinet and controls with a soft cloth lightly moistened with a mild detergent
solution. Do not use any abrasive materials or solvents such as alcohol or benzene.
2.Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as
pens or screwdrivers, as the screen may scratch.
3.Do not insert objects or spill liquids into the ventilation ports on the monitor’s rear, as
fire, electric shock, and / or unit failure may result.
Information for users applicable in United States of America
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE
RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR
FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC
INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC
DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG.
Transporting the monitor
1.When transporting the monitor for repair or shipment, first detach the base from the
monitor by pressing the “release tabs” located under the base and then pull the base
away from the monitor.Then wrap the monitor and its attachments with the original
carton and packing materials.
Installation
1. Do not cover or block the ventilation ports on the rear of the monitor.
2. Do not install the monitor close to heat sources such as radiators or air ducts, or in a
location exposed to direct sunlight, excessive dust, mechanical vibration,or shock.
3.The apparatus shall only be used between 5° tilted forward and 20° tilted backward as
normal operation position. If the tilt angle exceeds 20°, it shall be used for wall
mounting or packaging only.
- 1 -
GETTING STARTED
Package contents
Monitor installation
1.Setting up the monitor
Before beginning, ensure that the carton contains the following items:
1.1 Take out the monitor and monitor base from the package.
1.2 Place the detached monitor base on the desk.
1.3 Grasp the monitor with both hands and securely attach
the monitor by sliding the monitor neck into the base
(Ensure the direction of the base is correct)
1. LCD Monitor
2.Connecting signal cable
2. Monitor Base (the shape of base may vary according to the monitor model)
2.1 Switch off your computer.
2.2 Connect the signal cable to the D-SUB or DVI port at the rear of the monitor and
tighten the connector screws
2.3 Connect the other end of signal cable to the computer's VGA port and tighten the
connector screws.
3. Power Cord (plug may vary according to the electrical standards
for your area)
2.4 Note: Ensure the display setting does not exceed 1440*900, 75Hz.
3.Connecting audio cable (with audio option)
3.1 Plug the audio cable into the AUDIO port at the rear of the monitor.
3.2 Plug the other end of the audio cable into the audio port of your computer or other
audio source.
4. Analog Signal Cable
4.Connecting power
5. Digital Signal Cable (optional)
4.1 Plug the female end of the power cord into the POWER port at the rear of the monitor.
4.2 Plug the male end of the power cord into a power outlet.
5.Switching on
5.1 Switch on your computer.
6. Audio Cable (optional)
You should now be able to see the picture. If not , refer to the trouble shooting section of
this guide.
7. CD-ROM (contains user manual)
8. Quick Installation Guide
- 2 -
POWER AUDIO
DVI
D-SUB
Customizing your Monitor
The On Screen Display (OSD) system provides a full range of customizable tools to
optimize your display.
While full customization is available, we strongly recommend using
the Auto Adjustment function, which are preset to fully optimize your
monitor’s performance. Simply presses the
buttons
Important:
simultaneously to engage the Auto Adjustment. It is also
recommended that you execute the function following any change
made to your display from your computer.
Identifying parts and controls
1.The LED indicator and control buttons as following
Functions of the buttons and indicator:
Working with OSD Group
Button
Functions
1. Press Menu
button to activate the OSD menu.
1.Activates the Volume control menu, and increases volume (with audio option).
2.Scrolls the OSD menu upward.
2. Select the function from the OSD menu with the
button.
3.Increases the value of a selected function.
3. Press Menu
button to confirm the selection of specific function
to adjust the setting values.
1.Switches on the monitor.
4. Press
5. Press
6. Press
or
or
or
2.Activates the OSD control menu.
MENU
3.Selects the specific function.
to select the “ EXIT ”
to select the “ EXIT ”
icon to exit from the sub_ menu.
icon and then press the Menu
4.Switches off the monitor by pressing the button for 3 seconds.
button to
1.Activates the Volume control menu, and decreases volume (with audio option).
2.Scrolls the OSD menu downward.
exit from the OSD menu.
3.Decreases the value of a selected function.
1.Automatically optimizes picture performance.
- 3 -
Introduction to Hotkeys
1.Auto Adjustment
While the OSD menu is not shown, press
and
buttons simultaneously to optimize
the picture performance automatically
(You may also use the OSD control to activate the Auto Adjustment function. See OSD
Menu and Icon List section)
2.Volume Control (optional)
While the OSD menu is not shown, press
or
button to increase or decrease the
audio volume level.
- 4 -
OSD Icon List
* Select between Standard and Advanced power saving modes.
See addendum for details.
POWER SAVING
MODE
EXIT
* Disable the OSD menu
* Optimize the picture performance automatically (you may
also press and buttons simultaneously, while the OSD
menu is not shown, to activate the function)
AUTO
ADJUSTMENT
RECALL
* Reset monitor parameters back to factory preset values.
• Adjust the contrast level of the screen
CONTRAST
* Adjust the luminance level of the screen
BRIGHTNESS
* Select the input signal from Analog, and Digital Inputs
* Factory default: Analog (VGA)
INPUT SIGNAL
SELECT
OSD MENU
POSITION
* Adjust the position of OSD menu on the screen
OSD MENU
LANGUAGE
* Select your own preference of language of OSD menu.
HORIZONTAL
POSITION
* Shift the screen left or right
• Select the display ratio from Native, and Full Screen
• Full Screen: adjust and enlarge the display screen to full
screen size (16:10)
• Native: keep the display format as the input signal (4:3,
5:4, etc), and enlarge the display screen to the maximum
w/o losing any content (part of the screen may be blank)
VERTICAL
POSITION
ASPECT RATIO
• Shift the screen up or down
• Adjust the monitor internal signal phase
PHASE
CLOCK
Full Screen
(16:10)
Native
(4:3 or 5:4)
• Activate the embedded color engine to enhance the picture
performance (color saturation, contrast, etc) according to the
different condition of display contents
COLOR
ENHANCEMENT
• Adjust the monitor internal sampling clock rate
- 5 -
Troubleshooting
Symptom
Check Items
1.No picture
1. Check if the monitor is turned on (press the button
again).
2.LED indicator (at the right side of the
monitor) is not lit
2. Check if the power cord is properly connected to the monitor and power outlet.
3 .Check if there is electricity coming from the power outlet (use another device to check for power).
1.No picture
1 Check if your computer is turned on.
2.LED indicator (at the right side of the
monitor) is orange
2 Ensure the computer is not in power saving mode (move the mouse or press a key on the keyboard
to wake up the computer).
3 Check if the video signal cable is properly connected to the monitor and computer.
1.Picture shows “ NO SIGNAL INPUT ”
1 Check if your computer is turned on.
2 Check if the video signal cable is properly connected to the monitor and computer.
1.Picture shows “ INPUT SIGNAL OUT OF RANGE ” 1. Ensure that the resolution and/or refresh rate is set correctly.
1.Picture not clear
1. Press the
buttons simultaneously to activate the Auto Adjustment function
2 .Check if the video signal cable is properly connected to the monitor and computer.
3. Adjust the screen resolution and refresh rate of your computer to WXGA
(resolution: 1440*900, refresh rate: 60Hz) for the best performance
- 6 -
Technical Features and Specifications
Interface Frequency
Item
Description
410.4(H)X256.5(V) mm/ 408.24(H)X255.15(V)mm
0.285(H)X0.285(V)mm / 0.2835(H)X0.2385(V)mm
16.2M colors
Display Size
1. The following frequency range is the working period. If the entered mode between below
period but not match the frequency of supported timing, display optimization would not be
assured. If the entered mode is out of the working period, the display will be blanking
(just show “INPUT SIGNAL OUT OF RANGE”) then go to power saving.
Panel
Pixel Pitch
Monitor
Display Colors
Horizontal: 31.5 ~ 84KHz
Vertical: 56 ~ 76Hz
Input Signal
Frequency
2. Basically, mode judgment is regardless the sync polarity except both or more modes that
are all belong to the supported timing list and could be judged by sync polarity only.
WXGA 1440 X 900@75Hz
WXGA 1440 X 900@60Hz
Compatibility
PC
3. In the meantime, real entered frequency of the supported timing is not requested exactly.
4. Normalization of VGA card’ s deviation will be acceptable.
D-sub 15 pin
Analog
Connector
Tilt
Digital
DVI 29 pin
-5°~20°
5. Horizontal Frequency
6. Vertical Frequency
31.5 ~ 84KHz
56 ~ 76Hz
Tilt Angle
Dimensions
(W x H x D)
Net
Net
449(W) x 382(H) x 190(D) mm
Weight
4.8kg
AC
AC 100~240V, 50Hz/60Hz
Power
Consumption
Active: < 45W / Standby :< 2W
- 7 -
Addendum
* Standard Power Saving Mode (without Monitor Life-Extension function)
Advanced Power Saving Mode
1.Background
Power
The traditional monitors have the function of electricity-saving dormancy. But the interval
of dormancy is difficult to decide. If the interval is long, the purpose of saving electricity
can not be achieved. While the interval is short, your computer and LCD monitor would
be dormant often. When the LCD monitor becomes dormant, the back lights will be
turned off immediately. The frequent turn-on and turn-off of lights will result in the
lightness uneven and even shortening the life of the lights.
ON
Power Saving Start
2.Our solution to the dilemma - Monitor Life-Extension function
* Advanced Power Saving Mode (with Monitor Life-Extension function)
In view of that, we have designed the function of Monitor Life-Extension. Once you
select the option of “Advanced Power Saving Mode” in the OSD menu, and then you
can not only save electricity, but extend the life of the lights.
Power
60%
30%
10%
3.Working principle of the Monitor Life-Extension function
To minimize the impact of frequent turn-on and turn-off of LCD monitor, the
Life-Extension function decreases the electricity supplied to the back-light of LCD
monitor gradually, instead of cut it off right away when PC enters sleeping or off mode.
Please see following comparison graphics for details.
5s
7mins
ON
Sleep Start Power Saving Start
This “Slow-Start-n-Delay-Off” approach minimizes the transit of electricity and temperature
caused by the turn-on and turn-off of LCD monitor. Therefore, the decay of backlights of
TFT-LCD can be controlled in the certain level which is much less than it was.
- 8 -
4.The side effect of the Monitor Life-Extension function (why not
preset Advanced Power Saving Mode as default?)
FCC compliance
1.This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
According to the request of EPA (US Environmental Protection Agency) to power
management of monitors, the power consumption of the monitor must go down to below
3 watts within 3 seconds after the monitor steps in power saving mode. But the
Life-Extension function decreases the electricity supplied to the backlights of LCD
monitor gradually. Therefore, the Monitor Life-Extension function has conflict with the
requirement of EPA in the first 7 minutes after entering sleeping mode. Even
though,comparing the advantages of both conditions, we still recommend you strongly
to set your monitor in Advanced Power Saving mode.
2.NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation, If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
5. l How to engage the Monitor Life-Extension function?
You may simply use the OSD control to activate the Monitor
Life-Extension function.
1. Press the Menu
button to activate the OSD menu.
button to select the POWER SAVING MODE icon
button to confirm the selection.
3.Reorient or relocate the receiving antenna.
2. Press or
4.Increase the separation between the equipment and receiver.
3. Press the Menu
5.Connect the equipment to an outlet on a circuit different from that to which the receiver
is connected.
4. Press
or
button to select the ADVANCED option in the
POWER SAVING MODE function.
5. Press the Menu button to confirm the selection .
6. Press or
7. Press the Menu
6.Consult the dealer or an experienced radio/TV technician for help.
button to select the EXIT icon
button to exit the OSD menu .
Any unauthorized modification to this equipment could result in
the revocation of the authorization to operate the equipment and
WARNING:
void the product warranty.
- 9 -
|