RANGE
COMPOSITION
N 900: a range of over 150 models for the
professional caterer designed to guarantee
the highest level of performance, reliability,
energy saving, safety standards and
ergonomic operation. These concepts are
reflected in the total modularity of the range
that ensures innumerable configurations,
either free-standing, bridged or cantilever.
N900 demonstrates how advanced
technology can satisfy the needs of the
professional caterer.
The models detailed on this sheet are three
free-standing gas solid tops, one on a gas
oven, one with 2 burners on a gas oven and
one with 2 burners on gas oven and
cupboard (simple service) ideal for cooking
items requiring differentiated heating zones.
Model 200232
N 900
ZANUSSI
FREESTANDING GAS SOLID TOPS
P R O F E S S I O N A L
*In accordance with H regulations for gas models
belonging to Class B11 (power over 14 kW), it is
necessary to install a chimney (if installed under a
hood) or chimney and draft diverter if the waste gases
are vented directly outside.
� All models provided with service duct to
facilitate installation.
� All gas appliances are supplied for use
with natural gas, with LPG conversion jets
supplied as standard.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� Central burner with optimized combustion,
maximum power 10.5 kW, with flame failure
device and protected pilot light. Piezo ignition.
� Durable cast-iron cooking plate with
differentiated heating zones, maximum
temperature in the centre, 500°C, decreasing
towards the perimeter.
� IPX5 water protection.
TECHNICAL DATA
CHARACTERISTICS
MODELS
NTFG800
200231
NTFG1200
200232
NTFG810
200233
Power supply
External dimensions - mm
width
depth
height
height adjustment
Solid top area - mm
width
depth
Oven cavity - mm
width
depth
height
Oven
heat input - kW
temperature min-max - °C
Storage cupboard - mm
width
depth
height
Gas
Gas
Gas
� Worktop in 20/10 stainless steel. Front
and side panels in stainless steel with Scotch
Brite finish.
� All models have right-angled side edges to
allow flush fitting between units, eliminating
gaps and dirt traps.
� Gas oven with stainless steel burners,
self-stabilizing flame positioned beneath the
base plate and a thermostat adjustable from
120° to 280°C.
� Stainless steel oven chamber with 3 levels
of runners to accommodate 2/1GN shelves
� Ribbed, cast-iron oven base plate.
� Stainless steel feet adjustables up to a
height of 50 mm.
� Handles on the base cupboard and oven
in stainless steel.
� The special design of the control knob
system guarantees against water infiltration.
� Main connections can be via the base of
the unit.
800
900
850
50
1200
900
850
50
800
900
850
50
800
700
800
700
380
700
575
700
300
575
650
300
575
700
300
8.5
8.5
8.5
120, 280
120, 280
120, 280
335
740
350
10.5
Ø 100
10
Solid top heat input - kW
Back burner dimensions - mm
Back burners power - kW
Front burners dimension - mm
Front burners power - kW
Total Power - kW
Net weight - kg.
10.5
5.5
Ø 100
10
Ø 60
6
Ø 60
6
19
35
30
171
207
130
INCLUDED ACCESSORIES
2/1 GN CHROME GRID
1
1
1
200231, 200233, 200232
1600
400/800/1200
50
H
I
H
56
1488
56 56
688 / 1088
56
70
I
126
674
100
I
H
H
748
800
52
356 / 756
44
1600
348/748/1148 52
400 / 800 / 1200
LEGEND
NTFG800
200231
NTFG1200
200232
NTFG810
200233
H - Gas connection
1/2"
1/2"
1/2"
OPTIONAL ACCESSORIES
ACCESSORIES
MODELS
NTFG800
200231
NTFG1200
200232
NTFG810
200233
2 PANELS FOR SERVICE DUCT (BACK TO BACK)
2 PANELS FOR SERVICE DUCT (SINGLE INST.)
2 SIDE COVERING PANELS FOR TOP-D=900MM
2 SIDE COVERING PANELS H=700 D=900
2 SIDE KICKING STRIPS
2 SIDE KICKING STRIPS F.CONCRETE INSTAL.
4 FEET FOR CONCRETE INSTALLATION
4 WHEELS (2 WITH BRAKE)
206202
206181
206278
206134
206180
206157
206210
206188
206202
206181
206278
206134
206180
206157
206210
206188
206306
206202
206181
206278
206134
206180
206157
206210
206188
CHIMNEY UPSTAND 1200MM
CHIMNEY UPSTAND 800MM
206304
206132
206304
206132
DRAUGHT DIVERTER WITH 150 MM DIAMETER
ELECTRIC HEATING UNIT FOR CABINETS
FLANGED FEET KIT
206132
206142
206136
206156
206150
206151
206152
206146
206147
206148
206191
206192
206166
206167
206177
206178
206179
206174
206175
206176
206086
206185
206186
FLUE CONDENSER FOR 1 MODULE DIAM.150MM
FRONT.KICK.STRIP F.CONCRETE INST.1000 MM
FRONT.KICK.STRIP F.CONCRETE INST.1200 MM
FRONT.KICK.STRIP F.CONCRETE INST.1600 MM
FRONT.KICK.STRIP F.CONCRETE INST.200 MM
FRONT.KICK.STRIP F.CONCRETE INST.400 MM
FRONT.KICK.STRIP F.CONCRETE INST.800 MM
FRONTAL HANDRAIL 1200 MM
FRONTAL HANDRAIL 1600 MM
FRONTAL HANDRAIL 400 MM
FRONTAL HANDRAIL 800 MM
FRONTAL KICKING STRIP 1000 MM
FRONTAL KICKING STRIP 1200 MM
FRONTAL KICKING STRIP 1600 MM
FRONTAL KICKING STRIP 200 MM
FRONTAL KICKING STRIP 400 MM
FRONTAL KICKING STRIP 800 MM
JUNCTION SEALING KIT
LARGE HANDRAIL(PORTIONING SHELF)400 MM
LARGE HANDRAIL(PORTIONING SHELF)800 MM
LEFT SIDE DOOR FOR OPEN BASE CUPBOARD
MATCHING RING FOR FLUE CONDENSER 150DIAM
PAIR OF CAST IRON GRIDS
PAIR OF COVERING STRIPS FOR END ELEMENTS
PRESSURE REGULATOR FOR GAS UNITS
REAR FLUE UPSTAND FOR LARGE CHIMNEY
RIGHT SIDE DOOR FOR OPEN BASE CUPBOARD
S/S GRID FOR DOUBLE BURNER-900 LINE
SIDE HANDRAIL-RIGHT/LEFT HAND
206156
206150
206151
206152
206146
206147
206148
206191
206192
206166
206167
206177
206178
206179
206174
206175
206176
206086
206185
206186
206156
206150
206151
206152
206146
206147
206148
206191
206192
206166
206167
206177
206178
206179
206174
206175
206176
206086
206185
206186
206195
206133
206208
206234
927225
206160
206194
206298
206165
206172
206171
206170
206138
206139
206140
206141
206154
206137
206290
206288
206133
206133
206208
206234
927225
206160
206234
927225
206160
206298
206165
206172
206171
206170
206138
206139
206140
206141
206154
206137
206290
206288
206165
SINGLE BURNER RIBBED PLATE
SINGLE BURNER SMOOTH PLATE
SINGLE BURNER(6KW)RADIANT PLATE-900 LINE
SUPPORT FOR "BRIDGE" SYSTEM 1000 MM
SUPPORT FOR "BRIDGE" SYSTEM 1200 MM
SUPPORT FOR "BRIDGE" SYSTEM 1400 MM
SUPPORT FOR "BRIDGE" SYSTEM 1600 MM
SUPPORT FOR "BRIDGE" SYSTEM 400 MM
SUPPORT FOR "BRIDGE" SYSTEM 800 MM
WATER COLUMN EXTENSION FOR 900 LINE
WATER COLUMN WITH SWIVEL ARM
206138
206139
206140
206141
206154
206137
206290
206288
ZANUSSI
P R O F E S S I O N A L
BACG2
2009-06-19
The Company reserves the right to alter technical specifications without prior notice.
|