Induction Cooktops
EW36IC60I S, EW36IC60I B
36" INDUCTION COOKTOPS
Features
Perfect Set® Electronic Touch Controls
Ceramic Smoothtop Glass Surface
7"/11" Dual Element – 3400W
8" Induction Cooking Element – 2300W/3200W
7" Induction Cooking Element – 1900W
6" Induction Cooking Element – 1500W
Hot Surface Indicator Lights
Yes
Yes
1
2
1
1
Yes
Yes
Yes
Yes
Sealed Spill Control Cooktop
Sabbath Mode (Star-K® Certified)
A.D.A. Compliant*
Accessories
Granite Countertop Installation Kit – PN# 903061-9010
Optional
Specifications
Color –
Stainless Steel
S
B
Black
Product Dimensions –
Width
36-3/4"
Depth
21-3/4"
Height (Extreme Bottom to Underside of Cooktop)
Power Supply Connection Location
Connected Load (kW Rating) @ 240/208 Volts
Amps@240/208 Volts
Minimum Circuit Required (Amps)
2-1/2"
Right Center Rear
11.1/9.9
46/48
50
Electrical – Single phase 4-wire cable,
120/ 240 Volts or 120/208 Volts, 60 Hz,
fused on both sides of line with ground.
Required
Armored Electrical Cable
Included
Yes
More Energy-Efficient
Cooking with induction is 70% more
efficient than gas and 20% more efficient
than electric.
Approved for Single Oven Combination Installation**
Approved for Downdraft Combination Installation**
Shipping Weight (Approx.)
Yes
75 Lbs.
*When properly installed, meets the appliance standards in the Americans with Disabilities Act
and the Architectural Barriers Act Accessibility Guidelines as published by the United States
Access Board on June 23, 2004, as amended August 5, 2005.
NOTE: Always consult local and national electric codes. Refer to Product Installation Guide
for detailed installation instructions on the web at electroluxappliances.com.
Specifications subject to change.
**Approved to be used over any Electrolux Single Wall Oven
OR in combination with any Electrolux 36" Downdraft Vent.
More Responsive
Cooking with induction is more responsive
than gas or electric—you can instantly
adjust the heat to a delicate simmer or bring
it to a quick boil.
7"/11" Dual Element
Powerful and versatile element accom-
modates smaller cookware at a high level
of performance, but with the same energy
efficiency induction cooking provides.
The 11" burner size provides up to 3,400
watts of power for larger pots and pans.
Exceptional Temperature Control
Adjust heat with greater accuracy than gas
or electric cooktops, especially at lower
settings. Perfect for melting chocolate and
cooking delicate foods and sauces.
electroluxappliances.com
Electric Cooktop Installation
Over 30"/27" Electric Single Wall Oven
30" & 27" Electric Single Wall Ovens
Under-Counter Installation Specifications
Electric Cooktop Installation Over
30"/27" Electric Single Wall Oven Specifications
•
Product Weights – (EW30EW55G, EI30EW35J and EI30EW35K) 200 Lbs. /
Electrolux Single Wall Oven models EW30EW55G, EI30EW35J,
EI30EW35K, EW27EW55G, EI27EW35J and EI27EW35K are approved
to be used beneath Electrolux cooktop models EW36EC55G,
EW30EC55G, EW36IC60I, EW30IC60I, EW36CC55G and EW30CC55G.
For detailed Electric or Induction Hybrid Cooktop installation, refer to
model-specific product page and installation guide on web.
(EW27EW55G, EI27EW35J and EI27EW35K) 150 Lbs.
•
Single phase 3- or 4-wire cable, 120/240 or 120/208 Volt, 60 Hertz
AC only electrical supply with ground required on separate circuit fused
on both sides of line.
•
Connected Load (kW Rating) @ 240/208 Volts =
(30") 4.0/3.0kW / (27") 3.4/2.6kW
Amps @ 240/208 Volts = (30")17.0/14.5 Amps / (27")14.2/12.6 Amps
Recommended Circuit Breaker – 20 Amps
Always consult local and national electric codes.
Minimum 21" clearance for oven door depth when open.
Minimum 23-1/2" deep cutout dimension is critical for proper installation,
to ensure that oven’s faceplate will fit flush against cabinet front.
•
Side filler panels necessary to isolate oven from adjoining cabinets.
Panel height may need to be modified to accommodate the depth of
•
approved electric cooktop models.
•
•
To route armored cable to junction box, cut minimum 4" x 4" opening
in right cabinet side panel.
•
•
•
Allow 4-1/2" maximum height from oven base to floor, if cooktop is
installed directly over wall oven.
•
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxappliances.com for detailed instructions.
•
Full oven base of solid plywood or similar material required, capable
of supporting 200 Lbs. (30" models) or 150 Lbs. (27" models). Install
over two runners and flush with toe plate.
•
Base must be level and cabinet front must be square.
•
Allow 5" maximum height from oven base to floor, if NO cooktop is
installed directly over wall oven.
Electrolux Major Appliances, N.A.
High standards of quality at Electrolux Home Products, Inc. mean
we are constantly working to improve our products. We reserve the right
to change specifications or discontinue models without notice.
•
•
•
•
USA 10200 David Taylor Drive Charlotte, NC 28262 1-877-4electrolux (1-877-435-3287) electroluxappliances.com
•
•
•
•
CANADA 5855 Terry Fox Way Mississauga, ON L5V 3E4 1-800-265-8352 electroluxappliances.ca
EC_EW INST EL 07/11 © 2011 Electrolux Home Products, Inc.
Printed in the U.S.A.
Cooktop/Downdraft Vent
Countertop Preparation
Countertop Preparation for 30" & 36" Cooktop/Downdraft Vent Installation
For detailed cooktop and downdraft vent installation specifications, refer to model-specific product page and installation guide on web
Vertical noncombustible surface - rear wall
B
Backsplash
Top
3
/
4"max.
29/16"
231/4
min.
"
D*
1
/
4"min.
E**
flat ledge
C
Flush with
back side of
cabinet front
25"
* Overall flat ledge behind
backside of cabinet front
** Minimum flat surface
required to fit top surface
of cooktop and downdraft
vent cap
A
E30DD75ESS/30" Cooktop Cutout Dimensions
E36DD75ESS/36" Cooktop Cutout Dimensions
30" Cooktops
EW30IC60I
EW30CC55G
EW30EC55G
EW30GC55G
EW30GC60I
A
B
C
D
E
36" Cooktops
EW36IC60I
EW36CC55G
EW36EC55G
EW36GC55G
A
B
C
D
E
30" 273/4
30" 273/4
30" 273/4
281/2 273/4
281/2 273/4
"
20 1/2
20 1/2
20 5/8
19 3/4
19 3/4
"
23 5/16" 24 5/16"
23 5/16" 24 5/16"
23 7/16" 24 7/16"
22 9/16" 23 9/16"
22 9/16" 23 9/16"
36 1/4
36 1/4
36" 33 3/4
34 1/4 33 3/4
"
33 3/4
"
20 1/2
20 1/2
20 5/8
19 3/4
"
23 5/16" 24 5/16"
23 5/16" 24 5/16"
23 7/16" 24 7/16"
22 9/16" 23 9/16"
"
"
"
33 3/4
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
25"(standard countertop)*
4"max. backsplash thickness
Countertop
backsplash
3
Cooktop Installation Note:
/
To ensure proper installation, refer to model-specific installation
guide on web for cooktop dimensions, cutout dimensions and
cabinet requirements. Due to varying cooktop depths, tight fit
is possible between cooktop and vent.
1
/4" min. flat ledge
213/16"
21/8
Countertop
raised lip
Downdraft
chimney top
"
Studwall
Countertop Preparation Note:
Be aware of areas of potential interference called out in
illustration. Countertop with raised lip and/or backsplash may
not allow enough flat area for proper installation, 2-13/16"
of flat countertop required behind cooktop. No gap required
between back of cooktop and front of downdraft trim piece.
3"
9/32"
Cooktop
115/16"
Vent unit
Back side of
cabinet front
Vertical noncombustible surface - rear wall
231/4"min.
213/16"
*Standard 25" countertop depth may NOT be adequate for
some cooktop/vent installations, especially with backsplash.
Stiffener
Cooktop/Downdraft Vent
Countertop Preparation Specifications
•
•
•
•
•
Amps @120 Volts = 8.0 Amps
Vent unit outside of building only.
Vent must be installed in vertical orientation only.
1,600 CFM remote exhaust blower (PN#5304444802) included with
vent – shipped in separate box.
Do not use flexible duct. Round duct instead of rectangular duct
recommended, especially when elbows are required.
When multiple elbows are necessary, ensure a minimum of 24" of
straight duct between any two elbows.
Thermal breaks such as short section of nonmetallic duct, should
be used in areas of extreme cold.
For most efficient airflow exhaust, use a straight run or as few elbows
as possible.
Cold weather installations should have additional backdraft damper
installed.
For detailed Cooktop installation, refer to model-specific product page
and installation guide on web. Plan installation so that all required
minimum clearances between cooktop, overhead cabinets and adjacent
vertical walls are provided.
•
•
Position cooktop/vent cutout so all required minimum clearances are met.
Minimum flat countertop area must meet or exceed combined overall
width and depth as shown. Standard 25" countertop depth may NOT be
adequate for some cooktop/vent installations, especially with backsplash.
Separate circuits required for cooktop and vent. (Refer to product-specific
electrical specifications.)
Always consult local and national electric and gas codes. Check local
building codes for installation requirements, as they may vary per locale.
•
•
•
•
•
•
•
•
Downdraft Vent Specifications
•
For detailed Downdraft Vent installations, refer to model-specific
product page and installation guide on web.
Voltage Rating –120V/ 60Hz/15 Amps
Connected Load (kW Rating) @120 Volts = 1.0kW
(For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.)
Installing a Downdraft Vent in combination with any gas cooking
surface will affect optimum burner efficiency.
•
•
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxappliances.com for detailed instructions.
Electrolux Major Appliances, N.A.
High standards of quality at Electrolux Home Products, Inc. mean
we are constantly working to improve our products. We reserve the right
to change specifications or discontinue models without notice.
•
•
•
•
USA 10200 David Taylor Drive Charlotte, NC 28262 1-877-4electrolux (1-877-435-3287) electroluxappliances.com
•
•
•
•
CANADA 5855 Terry Fox Way Mississauga, ON L5V 3E4 1-800-265-8352 electroluxappliances.ca
DIC_DDV_PREP EL 10/10 © 2010 Electrolux Home Products, Inc.
Printed in the U.S.A.
|