Eizo DURAVISION FDS1901 User Manual

Important  
Please read this User’s Manual carefully to familiarize yourself with safe and  
effective usage. Please retain this manual for future reference.  
Wichtig  
Bitte lesen Sie diese Bedienungsanleitung sorgfältig durch, um sich mit  
dem sicheren und rationellen Betrieb dieses Produkts vertraut zu machen.  
Bewahren Sie das vorliegende Handbuch zu Referenzzwecken auf.  
Important  
Veuillez lire attentivement ce manuel d’utilisation pour utiliser pleinement  
votre appareil en toute sécurité. Veuillez conserver ce manuel pour  
référence ultérieure.  
重要  
请仔细阅读用户手册练掌握其安全和有效的操作程序妥善保存此手册,  
供日后参考。  
SAFETY SYMBOLS  
This manual and this product use the safety symbols below. They denote critical information. Please read them carefully.  
WARNING  
Failure to abide by the information in a WARNING may result in serious injury and can be life threatening.  
CAUTION  
Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage.  
Indicates an attention to be required. For example, the symbol  
“the risk of electric shock”.  
illustrates the hazard type such as  
Indicates a prohibited action. For example, the symbol  
such as “Do not disassemble”.  
illustrates a particular prohibited action  
Indicates a mandatory action that must be followed. For example, the symbol  
notification of general prohibition such as “Grounding the unit”.  
illustrates the  
Using the special functions, such as screen size change (ex. changing the horizontal and vertical ratio of  
images input) for commercial purposes or for the purpose of showing in public may violate copyright laws.  
<For USA-California Only>  
CR Coin Lithium Battery contains Perchlorate Material - special handling may apply.  
Product specification may vary with sales areas.  
Confirm the specification in the manual written in language of the region of purchase.  
Copyright© 2010 EIZO NANAO CORPORATION All rights reserved.  
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by  
any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO  
CORPORATION.  
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information  
confidential  
unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said  
information.  
Although every effort has been made to ensure that this manual provides up-to-date information, please  
note that EIZO monitor specifications are subject to change without notice.  
Apple and Macintosh are registered trademarks of Apple Inc.  
Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and other countries.  
VESA is a registered trademark or a trademark of Video Electronics Standards Association in the United States and other countries.  
NEC is a registered trademark of NEC Corporation. PC-9801 and PC-9821 are trademarks of NEC Corporation.  
EIZO, EIZO Logo and DuraVision are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries.  
All other trademarks are the properties of their respective owners.  
2
PRECAUTIONS  
IMPORTANT  
To ensure personal safety and proper maintenance, please read this section and the caution statements  
on the unit (refer to the figure below).  
[Location of Caution Statement]  
WARNING  
If the unit begins to emit smoke, smells like something is burning, or makes strange  
noises, disconnect all power connections immediately and contact your dealer for  
advice.  
Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage.  
Do not open the cabinet or modify the unit.  
Opening the cabinet or modifying the unit may result in fire, electric shock, or burn.  
Refer all servicing to qualified service personnel.  
Do not attempt to service this product yourself as opening or removing covers may result in fire,  
electric shock, or equipment damage.  
Keep small objects or liquids away from the unit.  
Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the  
cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into  
the cabinet, unplug the unit immediately. Have the unit checked by a qualified service engineer before  
using it again.  
Place the unit at the strong and stable place.  
A unit placed on an inadequate surface may fall and result in injury or equipment damage. If the  
unit falls, disconnect the power immediately and ask your dealer for advice. Do not continue using a  
damaged unit. Using a damaged unit may result in fire or electric shock.  
3
WARNING  
Use the unit in an appropriate location.  
Not doing so may result in fire, electric shock, or equipment damage.  
• Do not place outdoors.  
• Do not place in a transportation system (ship, aircraft, train, automobile, etc.) where it may be  
affected by strong vibration or shock.  
• Do not place in a dusty or humid environment.  
• Do not place in a location where water is splashed on the screen (bathroom, kitchen, etc.).  
• Do not place in a location where the steam comes directly on the screen.  
• Do not place near heat generating devices or a humidifier  
• Do not place in an inflammable gas environment.  
To avoid danger of suffocation, keep the plastic packing bags away from babies and  
children.  
Use the enclosed power cord and connect to the standard power outlet of your country.  
Be sure to remain within the rated voltage of the power cord.  
Not doing so may result in fire or electric shock.  
Power supply: 100-120/200-240Vac 50/60Hz  
To disconnect the power cord, grasp the plug firmly and pull.  
Tugging on the cord may damage and result in fire or electric shock.  
The equipment must be connected to a grounded main outlet.  
Failure to do so may result in fire or electric shock.  
Use the correct voltage.  
• The unit is designed for use with a specific voltage only. Connection to another voltage than specified  
in this User’s Manual may cause fire, electric shock, or equipment damage.  
Power supply: 100-240Vac 50/60Hz  
• Do not overload your power circuit, as this may result in fire or electric shock.  
Handle the power cord with care.  
• Do not place the cord underneath the unit or other heavy objects.  
• Do not pull on or tie the cord.  
If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire or electric  
shock.  
Never touch the plug and power cord if it begins to thunder.  
Touching them may result in electric shock.  
When attaching an arm stand, please refer to the user’s manual of the arm stand and  
install the unit securely.  
Not doing so may cause the unit to become unattached, which may result in injury or equipment  
damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged  
unit. Using a damaged unit may result in fire or electric shock. When reattaching the tilt stand, please  
use the same screws and tighten them securely.  
4
WARNING  
Handle the batteries for the remote control with care.  
Not doing so may result in battery explosion, liquid leakage, or burns.  
• Do not disassemble, heat, short-circuit, or immerse the provided batteries in water.  
• Install/change batteries in a correct way.  
• When replacing batteries, use ones of the same type and model.  
• When replacing batteries, replace all of them at the same time with new batteries of the same brand  
and type.  
• Insert batteries with correct direction of the plus (+) and minus (-) sides.  
• Do not use the battery with coating damaged.  
• Dispose of your battery in a designated disposal area.  
Keep the batteries for the remote control away from babies and children.  
Accidental swallowing of the batteries may cause choking or poisoning.  
In the event the batteries are swallowed, immediately consult a physician.  
Do not touch a damaged LCD panel directly with bare hands.  
The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth. If any part  
of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical  
symptoms result, please consult your doctor.  
Fluorescent backlight lamps contain mercury (the products that have LED backlight  
lamps contain no mercury), dispose according to local, state or federal laws.  
5
CAUTION  
Handle with care when carrying the unit.  
Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached  
is dangerous. It may result in injury.  
When handling the unit, grip the bottom of the unit firmly with both hands ensuring  
the panel faces outward before lifting.  
Dropping the unit may result in injury or equipment damage.  
Do not block the ventilation slots on the cabinet.  
• Do not place any objects on the ventilation slots.  
• Do not install the unit in a closed space.  
• Do not use the unit laid down or upside down.  
Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or  
equipment damage.  
Do not touch the plug with wet hands.  
Doing so may result in electrical shock.  
Use an easily accessible power outlet.  
This will ensure that you can disconnect the power quickly in case of a problem.  
Periodically clean the area around the plug.  
Dust, water, or oil on the plug may result in fire.  
Unplug the unit before cleaning it.  
Cleaning the unit while it is plugged into a power outlet may result in electric shock.  
If you plan to leave the unit unused for an extended period, disconnect the  
power cord from the wall socket after turning off the power for safety and power  
conservation.  
6
Notice for this monitor  
This product is suited for displaying surveillance camera images.  
This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is  
used outside the region, it may not operate as specified in the specifications.  
This product may not be covered by warranty for uses other than those described in this manual.  
The specifications specified in this manual are only applicable to signal cables specified by US.  
Use optional products manufactured or specified by us with this product.  
As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more  
after the monitor power has been turned on.  
In order to suppress the luminosity change caused by long-term use and to maintain the stable luminosity, use of a  
monitor at a lower “Backlight” setting is recommended.  
When the screen image is changed after displaying the same image for extended periods of time, an afterimage may  
appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.  
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer to  
The LCD panel is manufactured using high-precision technology. However, missing pixels or lit pixels may appear on  
the LCD panel, this is not malfunction. Percentage of effective pixels : 99.99% or higher.  
The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please  
contact your dealer.  
Do not press on the panel or edge of the frame strongly, as this may result in the display malfunction, such as the  
interference patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage your panel. (If  
the pressure marks remain on the panel, leave the monitor with a white or black screen. The symptom may disappear.)  
Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt  
to brush with tissues as this may scratch the panel.  
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation  
may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation  
disappears, otherwise it may cause some damages to the monitor.  
7
Cleaning  
ATTENTION  
• Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may  
damage the cabinet or panel.  
NOTE  
• Optional ScreenCleaner is recommended for cleaning the panel surface.  
Panel  
• Clean the panel with a soft cloth such as cotton cloth or lens cleaning paper.  
• If necessary, stubborn stains can be removed by moistening part of a cloth with water to enhance its  
cleaning power. After that, clean the panel again with a dry cloth for better finishing.  
Cabinet  
• Clean the cabinet with a soft cloth dampened with a little mild detergent.  
To use the monitor comfortably  
• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor  
according to the environmental conditions.  
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.  
8
 
CONTENTS  
Cover  
............................................................. 1  
PRECAUTIONS ................................................. 3  
Notice for this monitor ............................................. 7  
CONTENTS............................................................. 9  
Chapter 1 Introduction ..................................... 10  
1-1. Features .............................................................10  
1-2. Package Contents.............................................10  
1-3. Controls and Functions ...................................11  
Chapter 2 Connecting Cables.......................... 13  
2-1. Connection Procedures...................................13  
When used as a PC monitor.............................13  
When using video equipment ...........................14  
2-2. Adjusting the Screen Height and Angle ........15  
Chapter 3 Settings and Adjustments.............. 16  
3-1. Using Quick-OSD menu...................................16  
3-2. Using OSD menu ..............................................18  
Chapter 4 Troubleshooting .............................. 21  
Chapter 5 Reference......................................... 22  
5-1. How to Attach the Optional Arm.................... 22  
5-2. Specifications.................................................. 23  
5-3. Preset Timing................................................... 25  
LIMITED WARRANTY.......................................... 26  
CONTENTS  
9
Chapter 1 Introduction  
Thank you very much for choosing an EIZO color LCD monitor.  
1-1. Features  
• 19-inch screen  
• SXGA (1280 × 1024) display compliant  
• Analog signal support  
PC signal: D-Sub mini 15-pin connector × 1  
- Horizontal scan frequency 24.8 kHz - 74.8 kHz  
- Vertical scan frequency 56.2 Hz - 75.1 Hz  
Video signal: BNC connector × 1  
- Applicable Format NTSC, PAL, SECAM  
• Video Aspect function  
Alters the display range of the input image (overscan)  
• Remote control enables easy operation, setting and adjustment of the monitor.  
1-2. Package Contents  
Check that all the following items are included in the packaging box. If any items are missing or  
damaged, contact your local dealer.  
NOTE  
• Please retain the packing materials for future transport of the monitor.  
• LCD Monitor  
• Remote control  
• Coin lithium battery (CR2032)  
• Power cord  
• Mounting screws (M4 × 12mm 4pcs)  
• User’s Manual (Limited Warranty included)  
Chapter 1 Introduction  
10  
1-3. Controls and Functions  
Monitor  
15  
14  
13  
8
9
10  
1112  
1
2
3
4
5
6
7
Receives the signal from the remote control.  
1 Remote control detector  
2
Displays the volume adjustment menu to volume up or down.  
• Displays/Exits the OSD menu.  
button  
3
• Pressing the button while the OSD menu is displayed returns you to the  
previous menu status.  
button  
• Used to: select the OSD menu tab; select the set value; or to increase/  
decrease the adjustment value.  
4
button  
• Press  
twice to switch the input signals.  
• Displays the Quick-OSD menu.  
5
6
button  
button  
• Used to select the setting or adjustment items in each menu.  
Turns the power on or off.  
Indicates monitor’s operation status.  
Blue  
: Operating  
7 Power indicator  
Orange : Standby mode  
8 Speaker  
Outputs audio source.  
9 Power connector  
10 Input signal connector  
11 Input signal connector  
12 Input signal connector  
13 Stand*1  
Connects the power cord.  
D-Sub mini 15-pin connector  
BNC connector  
Pin jack (L, R)  
Used to adjust the hight and angle of the monitor screen.  
Complies with Kensington’s MicroSaver security system.  
Covers the monitor cables.  
14 Security lock slot  
15 Cable holder  
*1  
An optional arm (or an optional stand) can be attached by removing the stand (see “5-1. How to Attach the Optional Arm” (page 22)).  
Chapter 1 Introduction  
11  
Remote Control  
1
2
POWER  
Turns the power on or off.  
Switches to PC input.  
PC  
INPUT  
SELECT  
1
2
VIDEO Switches to video input.  
Displays the volume adjustment menu to volume up or  
3
4
5
VOLUME  
down.  
4
5
• Displays/Exits the OSD menu.  
3
8
MENU  
• Pressing the button while the OSD menu is  
displayed returns you to the previous menu status.  
Pressing the button while the menu is displayed  
returns you to the previous menu status.  
6
7
RETURN  
• Used to: select the OSD menu tab; select the set  
value; or to increase/decrease the adjustment value.  
6
/ / / >  
• Pressing  
or  
while the OSD menu is not  
displayed allows you to adjust the brightness of the  
backlight.  
Used to fix the setting or adjustment items in each  
menu.  
7
8
ENTER  
MODE  
Switches the gamma setting.  
Before Using Remote Control  
How to install batteries  
1 While pushing the tab toward the arrow (1), pull  
out the battery case (2).  
(1)  
(2)  
2 Insert a battery with the positive side up.  
(Battery model number: CR2032)  
3 Insert the battery case until it clicks.  
Receivable Range of Remote Control  
Use the remote control inside of the range as below.  
5m  
30°  
30°  
30°  
7m  
30°  
5m  
5m  
7m  
5m  
Chapter 1 Introduction  
12  
Chapter 2 Connecting Cables  
2-1. Connection Procedures  
1 Connects to external equipment compatible with the monitor.  
• When used as a PC monitor ....................................................page 13  
• When using video equipment.................................................. page 14  
When used as a PC monitor  
ATTENTION  
• When replacing the current monitor with an FDS1901 monitor, be sure to change the PC settings for the resolution  
and vertical scan frequency to those which are available for the FDS1901 monitor referring to the resolution table  
(see below) before connecting the PC.  
Compatible Resolutions/Frequencies  
The monitor supports the following resolutions.  
Vertical Scan  
Resolution  
Display Mode  
Dot Clock  
Frequency  
640 × 400  
640 × 400  
640 × 480  
640 × 480  
720 × 400  
800 × 600  
832 × 624  
1024 × 768  
1152 × 864  
1152 × 870  
1280 × 960  
1280 × 960  
1280 × 1024*1  
NEC PC-9801  
NEC PC-9821 AP2  
Apple Macintosh  
VGA, VESA  
VGA TEXT  
VESA  
Apple Macintosh  
VESA  
VESA  
Apple Macintosh  
VESA  
56 Hz  
70 Hz  
67 Hz  
~75 Hz  
70 Hz  
~75 Hz  
75 Hz  
~75 Hz  
75 Hz  
75 Hz  
60 Hz  
75 Hz  
60 Hz  
~126 MHz  
Apple Macintosh  
VESA  
*1  
Recommended resolution  
Chapter 2 Connecting Cables  
13  
 
(1) Connect the monitor to the PC with a signal cable that matches the connectors.  
After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.  
Monitor  
PC  
D-Sub mini 15-pin  
D-Sub mini 15-pin  
connector  
Signal cable MD-C87 (optional)  
connector  
or  
DVI connector  
Signal cable FD-C16 (optional)  
Audio input  
connector *1  
Audio cable (Commercially available product)  
Audio output  
connector  
When using video equipment  
(1) Connect the monitor to the video equipment with a signal cable that matches the connectors.  
Monitor  
Video equipment  
BNC  
BNC  
BNC cable (Commercially available product)  
Audio cable (Commercially available product)  
Audio input  
connector *1  
Audio output  
connector  
1
*
The monitor is equipped with a single audio input connector to connect for either a PC or visual equipment. Regardless of  
the input device selected, the monitor will output sound.  
Chapter 2 Connecting Cables  
14  
 
2 Plug the power cord of the monitor into a power outlet.  
Plug the power cord into a power outlet and the Power connector on the monitor.  
ATTENTION  
• For the maximum power saving, it is recommended that the Power button be turned off. Unplugging the power  
cord completely shuts off power supply to the monitor.  
2-2. Adjusting the Screen Height and Angle  
Hold left and right edge of the monitor with both hands, and adjust the screen height, tilt and swivel the  
screen to the best condition for working.  
Chapter 2 Connecting Cables  
15  
Chapter 3 Settings and Adjustments  
Setting and adjustment of the monitor can be performed using the Quick-OSD menu or OSD menu.  
The Quick-OSD menu enables easy operation of frequently used functions in the OSD menu.  
3-1. Using Quick-OSD menu  
Basic operation of Quick-OSD menu  
1 Displaying Quick-OSD Menu  
The buttons on the monitor  
Press  
The remote control  
Press , or  
.
,
.
2 Setting/Adjusting  
The buttons on the monitor  
Use  
to select the set/adjustment items. Then, use  
or  
for setting/adjustment.  
The remote control  
Use  
or  
to select the set/adjustment items. Then, use  
or  
for setting/adjustment.  
3 Storing/Exiting  
The buttons on the monitor  
The setting/adjustment is saved at the time it is changed.  
The Quick-OSD menu automatically closes when a button is not used for 5 seconds.  
The remote control  
The setting/adjustment is saved at the time it is changed.  
Selecting  
closes the Quick-OSD menu.  
Chapter 3 Settings and Adjustments  
16  
Functions  
The adjustable settings in the Quick-OSD menu are shown below. The availability of items depends on the  
input signal.  
: Configurable : Not configurable  
Setting / adjustable item  
PC Video  
Setting / adjustable content  
Brightness  
Contrast  
H Position  
V Position  
Color  
0 to 100  
0 to 100  
Adjusts the brightness.  
Adjusts the contrast.  
0 to 100  
Adjusts the display position (horizontal).  
Adjusts the display position (vertical).  
Adjusts the saturation.  
0 to 100  
0 to 100  
Tint  
0 to 100  
Adjusts the hue.  
Image Size  
Fill All/16:9/4:3  
Changes the screen size.  
* There are three sizes available for “16:9”. The sizes  
switch in the following order:  
.
Mode  
Light/Dark/  
Dynamic  
Switches the gamma setting.  
Backlight  
0 to 100  
Adjusts the brightness of the backlight.  
NOTE  
• When a PC is used for input, the Auto Adjust” (automatic screen adjustment) menu is displayed when the  
buttons are pressed. Press while the menu is displayed to automatically adjust the screen.  
and then  
Chapter 3 Settings and Adjustments  
17  
3-2. Using OSD menu  
Basic operation of OSD menu  
1 Displaying OSD menu  
The buttons on the monitor  
Press  
The remote control  
Press  
.
.
2 Setting/Adjusting  
The buttons on the monitor  
Use  
Use  
or  
to select the menu tab and then press  
.
to select the set/adjustment items. Then, use  
or  
.
for setting/adjustment.  
The remote control  
Use  
Use  
or  
or  
to select the menu tab and then press  
to select the set/adjustment items. Then, use  
or  
for setting/adjustment.  
3 Storing/Exiting  
The buttons on the monitor  
After completing the setting/adjustment, selecting  
allows you to store the setting.  
allows you to store the setting.  
Selecting  
repeatedly closes the OSD menu.  
The remote control  
After completing the setting/adjustment, selecting  
Selecting  
repeatedly closes the OSD menu.  
NOTE  
• To go back to the previous menu, press  
.
Chapter 3 Settings and Adjustments  
18  
Functions  
The settings adjustable in the OSD menu are as shown below. The availability of items depends on the input  
signal.  
: Configurable : Not configurable  
Menu tab  
Setting / adjustable item  
PC Video  
Setting / adjustable content  
Adjusts the brightness.  
Picture  
Brightness  
0 to 100  
0 to 100  
0 to 100  
Contrast  
Phase  
Adjusts the contrast.  
Adjusts the flickering or blurring.  
Adjusts the frequency (clock).  
Frequency  
Sharpness  
0 to 15  
Adjusts the sharpness of the image  
outline.  
0 (blur) to 15 (sharp)  
* This adjustment has no effect for  
images of 1280 × 1024 resolution.  
Color  
0 to 100  
0 to 100  
0 to 100  
Adjusts the saturation.  
Adjusts the hue.  
Tint  
Color Temp Red/  
Adjusts the intensity of each color:  
Red, Green, and Blue.  
Green/  
Blue  
Img. Adj  
Image Size  
Fill Aspect/  
Fill All/  
Changes the screen size.  
1 TO 1  
Fill All/  
Changes the screen size.  
16:9/4:3  
* There are three sizes available  
for “16:9”. The sizes switch in the  
following order:  
.
H Position  
0 to 100  
0 to 100  
Adjusts the display position  
(horizontal).  
V Position  
Adjusts the display position (vertical).  
Auto Adjust  
Performs the automatic screen  
adjustment.  
Chapter 3 Settings and Adjustments  
19  
 
Menu tab  
Setting / adjustable item  
0 to 100  
PC Video  
Setting / adjustable content  
Setup  
Backlight  
DPMS  
Adjusts the brightness of the backlight.  
On/Off  
Switches the power saving setting  
(DPMS) on or off.  
The backlight turns off when the  
synchronized input signal is no longer  
detected.  
OSD  
Settings  
Transparency  
0 to 100  
15 to 60  
Adjusts the transparency of the  
background color for the OSD menu.  
OSD Timeout  
(sec)  
Adjusts the display time of the OSD  
menu.  
Mode  
Light/Dark/  
Dynamic  
Sets the appearance of the monitor to  
light, dark, or modulated screen that  
emphasizes low gradation contrast by  
setting the gamma.  
Up View  
On/Off  
On/Off  
Switches to the most suitable gamma  
setting if the screen is to be viewed  
from below.  
Source Scan  
Switches the auto-selection of input  
signal (automatically detects the  
input signal and displays the screen  
accordingly) on or off.  
Analog RGB Calibration  
Adjusts the color gradation.  
Input the signal data in accordance  
with the displayed message.  
Reset Calibration  
Video Aspect  
Returns the color gradation to the  
default setting.  
Normal/100%  
Switches the display range of the input  
image (overscan).  
* Select "100%" to display the input  
image almost in full. (Depending on  
the input signal, noise may appear  
around the peripheral portions of the  
screen image.)  
Utilities  
Infos  
Language  
English/  
Deutsch  
Selects the language (English/  
Deutsch) for the menu.  
Factory Reset  
Testpattern  
Returns the menu to the default setting.  
Displays the Testpattern.  
Displays the monitor information.  
* The “Power On Time” and “Backlight  
On Time” are not always “0” due  
to factory inspection when you  
purchase the monitor.  
Chapter 3 Settings and Adjustments  
20  
Chapter 4 Troubleshooting  
If a problem still remains after applying the suggested remedies, contact your local dealer.  
Common  
Problems  
Possible cause and remedy  
1. No picture  
• Check whether the power cord is connected properly.  
• Power indicator does not light.  
• If the problem persists, turn off the power, and then turn  
it on again a few minutes later.  
• Press  
monitor).  
• Operate the mouse or keyboard.  
on the remote control (or  
on the  
• Power indicator lights orange.  
• Check whether the power of the connected device is  
turned on.  
• Check whether the signal cable is connected properly.  
• Switch the input signal.  
• Power indicator lights blue.  
• Check whether the power of the connected device is  
turned on.  
• Switch the input signal.  
• Set each adjusting value in [Brightness] and [Contrast]  
to higher level. (see page 19)  
2. The screen is too bright or too  
dark.  
• Adjust using [Brightness] or [Contrast]. (The LCD  
monitor backlight has a fixed life span. When the screen  
becomes dark or begins to flicker, contact your local  
dealer.) (see page 19)  
3. No sound  
• Check whether the audio cable is connected properly.  
• Check that the volume is not set to “0”.  
4. Green/red/blue/white dots or  
defective dots remain on the  
screen.  
• This is due to LCD panel characteristics and is not a  
failure.  
5. Interference patterns or pressure  
marks remain on the screen.  
• Leave the monitor with a white or black screen. The  
symptom may disappear.  
6. Afterimages appear.  
• Afterimages are particular to LCD monitors. Avoid  
displaying the same image for a long time.  
• Use the screen saver or power save function to avoid  
displaying the same image for extended periods of time.  
When displaying on a PC screen  
Problems  
Possible cause and remedy  
1. Display position is incorrect.  
• Adjust image position using [H Position] or [V Position].  
(see page 19)  
2. Whole screen is flickering or  
blurring.  
• Adjust using [Phase]. (see page 19)  
Chapter 4 Troubleshooting  
21  
Chapter 5 Reference  
5-1. How to Attach the Optional Arm  
An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our  
web site for the corresponding optional arm (or optional stand). http://www.eizo.com  
ATTENTION  
• When attaching an arm or stand, follow the instructions of their user’s manual.  
• When using another manufacturer’s arm or stand, confirm the following in advance and select one conforming to  
the VESA standard. Use the M4 × 12mm screws supplied with this monitor.  
- Clearance between the screw holes : 100mm × 100mm  
- Thickness of plate : 2.6mm  
- Strong enough to support weight of the monitor unit (except the stand) and attachments such as cables.  
• When using an arm or stand, attach it to meet the following tilt angles of the monitor.  
- Up 60 degrees, down 45 degrees (horizontal display)  
- Up 45 degrees, down 45 degrees (vertical display, 90 degrees clockwise)  
• Connect the cables after attaching an arm or a stand.  
• Since the monitor and arm are so heavy, dropping them may result in injury or equipment damage.  
[Attachment Procedure]  
1 Lay the LCD monitor on a soft cloth spread over on a stable surface with the  
panel surface facing down.  
2 Remove the stand.  
Prepare a screwdriver. Unscrew the four screws securing the unit and the stand with the screwdriver.  
3 Attach the monitor to the arm or stand.  
Secure the monitor to the arm or stand using the screws specified in the user’s manual of the arm or stand.  
Chapter 5 Reference  
22  
 
5-2. Specifications  
LCD Panel  
Size  
19.0-inch (480 mm) TFT color LCD  
Anti-glare  
Surface treatment  
Surface hardness  
Viewing angle  
Dot Pitch  
3H  
Horizontal 170°, Vertical 170° (CR : 10 or more)  
0.294 mm  
Display Area (H × V)  
Resolution  
376.32 mm × 301.06 mm  
1280 dots × 1024 lines  
Approx. 16.77 million colors  
24.8-74.8 kHz  
Max. Display Color  
PC input  
Horizontal Scan  
Frequency  
Vertical Scan Frequency  
Max. Dot Clock  
56.2-75.1 Hz  
126 MHz  
Input Signal Connector  
Input Signal (Sync)  
Input Signal (Video)  
D-Sub mini 15-pin ×1  
Separate, TTL, positive / negative  
Analog, Positive (0.7Vp-p/75Ω)  
15 types  
Max. Video Signal  
Memory  
Plug and Play  
VESA DDC 2B / EDID structure 1.3  
NTSC, PAL, SECAM  
BNC ×1  
Video input  
Applicable Format  
Input Signal Connector  
Input Signal Level  
Input Signal Connector  
Speaker output  
1.0Vp-p/75Ω  
Audio  
Pin Jack (L, R) ×1  
0.3 W + 0.3 W  
Power Supply  
100-120 VAC ±10%, 50/60 Hz 0.8 A  
200-240 VAC ±10%, 50/60 Hz 0.5 A  
Power  
Consumption  
Screen Display On  
Power saving mode  
49 W or less (Speaker working)  
46 W or less (Speaker not working)  
8 W or less (for single signal input, when audio cable is not  
connected)  
Power off  
Main unit  
1.3 W or less  
Dimensions  
(Width) ×  
(Height) ×  
(Depth)  
405 mm (15.9 inch) × 406.5 - 506.5 mm (16 - 19.9 inch) ×  
205 mm (8.1 inch)  
Main unit (without stand)  
405 mm (15.9 inch) × 334 mm (13.1 inch) × 61.5 mm (2.42  
inch)  
Mass  
Main unit  
Approx. 7.2 kg (15.9 lbs.)  
Approx. 5.2 kg (11.5 lbs.)  
30°Up, 0°Down  
Main unit (without stand)  
Movable  
range  
Tilt  
Swivel  
35°Right, 35°Left  
Environmental Temperature  
Conditions  
Operating temperature : 0 °C - 35 °C (32 °F - 95 °F)  
Storage temperature : -20 °C - 60 °C (-4 °F - 140 °F)  
Humidity  
Operating humidity : 20% - 80% R.H. (no condensation)  
Storage humidity : 10% - 90% R.H. (no condensation)  
Pressure  
Operating : 700 hPa - 1,060 hPa  
Storage : 200 hPa - 1,060 hPa  
Chapter 5 Reference  
23  
Main default settings (factory settings)  
Function  
PC input  
Video input  
Volume  
Brightness  
Contrast  
Sharpness  
Image Size  
Color  
45  
50  
60  
50  
7
Fill All  
60  
50  
Tint  
Backlight  
DPMS  
100  
On  
OSD Settings Transparency  
OSD Timeout  
Mode  
50  
45  
Light  
Off  
Up View  
Source Scan  
Video Aspect  
Language  
On  
Normal  
English  
Outside Dimensions  
unit : mm (inch)  
374(14.7)  
172(6.8)  
SWIVEL  
226(8.9)  
TILT  
239(9.4)  
320(12.6)  
405(15.9)  
13.3  
378.4(14.9)  
13.3(0.52)  
(0.52)  
152.5(6)  
100(3.9)  
152.5(6)  
47.5  
(1.87)  
205(8.1)  
Chapter 5 Reference  
24  
5-3. Preset Timing  
The following table shows factory preset analog signal timing:  
ATTENTION  
• Display position may be deviated depending on the PC connected, which may require screen adjustment using  
Setting menu.  
• If a signal other than those listed in the table is input, adjust the screen using the Setting menu. However, screen  
display may still be incorrect even after the adjustment.  
• When interlace signals are used, the screen cannot be displayed correctly even after screen adjustment using the  
Setting menu.  
Frequency  
Dot clock : Horizontal :  
Polarity  
Applicable  
signal  
Resolution  
Vertical :  
Hz  
Horizontal Vertical  
MHz  
kHz  
720 × 400  
640 × 480  
640 × 480  
640 × 480  
800 × 600  
800 × 600  
800 × 600  
800 × 600  
1024 × 768  
1024 × 768  
1024 × 768  
1152 × 864  
1280 × 960  
1280 × 1024  
640 × 480  
832 × 624  
1152 × 870  
1280 × 960  
640 × 400  
640 × 400  
VGA TEXT  
VGA  
28.33  
31.47  
70.09  
Negative  
Negative  
Negative  
Negative  
Positive  
Positive  
Positive  
Positive  
Negative  
Negative  
Positive  
Positive  
Positive  
Positive  
Negative  
Negative  
Negative  
Positive  
Negative  
Negative  
Positive  
Negative  
Negative  
Negative  
Positive  
Positive  
Positive  
Positive  
Negative  
Negative  
Positive  
Positive  
Positive  
Positive  
Negative  
Negative  
Negative  
Positive  
Negative  
Negative  
25.18  
31.5  
31.47  
37.86  
37.50  
35.16  
37.88  
48.08  
46.88  
48.36  
56.48  
60.02  
67.50  
60.00  
63.98  
35.00  
49.72  
68.68  
74.76  
24.83  
31.48  
59.94  
72.81  
75.00  
56.25  
60.32  
72.19  
75.00  
60.00  
70.07  
75.03  
75.00  
60.00  
60.02  
66.67  
74.55  
75.06  
74.76  
56.42  
70.10  
VESA  
VESA  
31.5  
VESA  
36.00  
40.00  
50.00  
49.50  
65.00  
75.00  
78.75  
108.00  
108.00  
108.00  
30.24  
57.28  
100.00  
126.20  
21.05  
25.18  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
MAC  
MAC  
MAC  
MAC  
PC-9801  
PC-9821 AP2  
Chapter 5 Reference  
25  
LIMITED WARRANTY  
EIZO NANAO CORPORATION (hereinafter referred to as “EIZO”) and distributors authorized by EIZO (hereinafter  
referred to as the “Distributors”) warrant, subject to and in accordance with the terms of this limited warranty (hereinafter  
referred to as the “Warranty”), to the original purchaser (hereinafter referred to as the “Original Purchaser”) who  
purchased the product specified in this document (hereinafter referred to as the “Product”) from EIZO or Distributors,  
that EIZO and Distributors shall, at their sole discretion, either repair or replace the Product at no charge if the Original  
Purchaser becomes aware within the Warranty Period (defined below) that the Product malfunctions or is damaged in the  
course of normal use of the Product in accordance with the description in the instruction manual attached to the Product  
(hereinafter referred to as the “User’s Manual”).  
The period of this Warranty is two (2) years from the date of purchase of the Product (hereinafter referred to as the  
“Warranty Period”). EIZO and Distributors shall bear no liability or obligation with regard to the Product in relation to the  
Original Purchaser or any third parties other than as provided under this Warranty.  
EIZO and Distributors will cease to hold or store any parts of the Product upon expiration of seven (7) years after the  
production of such parts is discontinued. In repairing the monitor, EIZO and Distributors will use renewal parts which  
comply with our QC standards.  
The Warranty is valid only in the countries or territories where the Distributors are located. The Warranty does not restrict  
any legal rights of the Original Purchaser.  
Notwithstanding any other provision of this Warranty, EIZO and Distributors shall have no obligation under this Warranty  
whatsoever in any of the cases as set forth below:  
(a) Any defect of the Product caused by freight damage, modification, alteration, abuse, misuse, accident, incorrect  
installation, disaster, faulty maintenance and/or improper repair by third party other than EIZO and Distributors;  
(b) Any incompatibility of the Product due to possible technical innovations and/or regulations;  
(c) Any deterioration of display performance caused by the deterioration of expendable parts such as the LCD panel  
and/or backlight, etc. (e.g. changes in brightness, changes in brightness uniformity, changes in color, changes in  
color uniformity, defects in pixels including burnt pixels, etc.);  
(d) Any defect of the Product caused by external equipment;  
(e) Any defect of the Product on which the original serial number has been altered or removed;  
(f) Any defect of the Product caused by liquid leaking from battery;  
(g) Any normal deterioration of the product, particularly that of consumables, accessories, and/or attachments (e.g.  
batteries, buttons, rotating parts, remote control, cables, User’s Manual, etc.); and  
(h) Any deformation, discoloration, and/or warp of the exterior of the product including that of the surface of the LCD  
panel.  
To obtain service under the Warranty, the Original Purchaser must deliver the Product, freight prepaid, in its original  
package or other adequate package affording an equal degree of protection, assuming the risk of damage and/or loss  
in transit, to the local Distributor. The Original Purchaser must present proof of purchase of the Product and the date of  
such purchase when requesting services under the Warranty.  
The Warranty Period for any replaced and/or repaired product under this Warranty shall expire at the end of the original  
Warranty Period.  
EIZO OR DISTRIBUTORS ARE NOT RESPONSIBLE FOR ANY DAMAGE TO, OR LOSS OF, DATA OR OTHER  
INFORMATION STORED IN ANY MEDIA OR ANY PART OF ANY PRODUCT RETURNED TO EIZO OR  
DISTRIBUTORS FOR REPAIR.  
EIZO AND DISTRIBUTORS MAKE NO FURTHER WARRANTIES, EXPRESSED OR IMPLIED, WITH RESPECT TO  
THE PRODUCT AND ITS QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR  
USE. IN NO EVENT SHALL EIZO OR DISTRIBUTORS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL,  
CONSEQUENTIAL OR OTHER DAMAGE WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR  
LOSS OF PROFIT, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY  
LOSS) ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT OR IN ANY CONNECTION WITH THE  
PRODUCT, WHETHER BASED ON CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, EVEN  
IF EIZO OR DISTRIBUTORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS EXCLUSION  
ALSO INCLUDES ANY LIABILITY WHICH MAY ARISE OUT OF THIRD PARTY CLAIMS AGAINST THE ORIGINAL  
PURCHASER. THE ESSENCE OF THIS PROVISION IS TO LIMIT THE POTENTIAL LIABILITY OF EIZO AND  
DISTRIBUTORS ARISING OUT OF THIS LIMITED WARRANTY AND/OR SALES.  
LIMITED WARRANTY  
26  
关于电子信息产品污染控制标识  
本标识根据「电子信息产品污染控制管理办法适用于在中华人民共和国销售的电子信息产品。标识中央的  
数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项,在自制造日起算的年限内,不会  
产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。  
有毒有害物质或元素的名称及含量  
部件名称  
有毒有害物质或元素  
(Pb)  
×
(Hg)  
(Cd)  
六 价  溴 联 苯多溴二苯醚  
(Cr(VIPBB)  
(PBDE)  
印刷电路板  
机箱  
×
×
液晶显示器  
其他  
×
表示该有毒有害物质在该部件所有均质材料中的含量均SJ/T 11363-2006定的限量要求以下。  
×表示该有毒有害物质至少在该部件的某一均质材料中的含量超SJ/T 11363-2006定的限量要求。  
(业可在此,据实际情況对上表中打“×的技术原因进行进一步说)  

Glem Gas_Emilia C64ECT User Manual
GE DECT 28129xx5 User Manual
EPoX Computer KP6 FX2 User Manual
Cisco Systems IAD2430 User Manual
Black Box Computer Hardware RS 485 User Manual
Bafo Technologies USB 2 0 User Manual
AT T EL51200 User Manual
AT T EL42258 User Manual
Asus Motherboard K8V X User Manual
AOC Computer Monitor E2795VH User Manual