TM
Dell D1920 monitor
User Manual
English
Pyccкий
Svenska
Suomi
简体中文
繁體中文
日本语
Deutsch
Français
Italiano
Dansk
한국어
Español
Portuquês
Polski
Norsk
Nederlands
Model: D1920f
PRECAUTIONS
Information for users applicable in United States of America
Maintenance
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE
RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR
FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC
INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC
DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG.
1.Clean the cabinet and controls with a soft cloth lightly moistened with a mild detergent
solution. Do not use any abrasive materials or solvents such as alcohol or benzene.
2.Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as
pens or screwdrivers, as the screen may scratch.
3.Do not insert objects or spill liquids into the ventilation ports on the monitor’s rear, as
fire, electric shock, and / or unit failure may result.
Installation
Transporting the monitor
1. Do not cover or block the ventilation ports on the rear of the monitor.
2. Do not install the monitor close to heat sources such as radiators or air ducts, or in a
location exposed to direct sunlight, excessive dust, mechanical vibration,or shock.
3.The apparatus shall only be used between 5° tilted forward and 15° tilted backward as
normal operation position. If the tilt angle exceeds 15°, it shall be used for wall
mounting or packaging only.
1.When carrying the display for repair or service, disassemble the monitor and pack in its
original packing. To disassemble the neck and base, press the "release button" located
on the back of the neck and detach the neck/base, then remove the base from the neck
by pressing the “release tabs” located under the base plate and pull the neck off the
base, finally use the original carton and packing materials to wrap the display and its
accessories.
Power connection
1.Use the correct power cord for your local voltage.
2.Use an accessible outlet close to the monitor.
3.Do not allow anything to rest on the power cable.
4.Only use the power adapter attached to the monitor.
5.Disconnect the power cable from the power supply if:
5.1 You will not use the monitor for an extended period.
5.2 The cable is damaged or frayed.
5.3 The monitor has been dropped or the cabinet damaged.
5.4 A distinct change in performance indicates a need for servicing.
- 1 -
GETTING STARTED
Package contents
Monitor installation
Before beginning, ensure that the carton contains the following items:
1.Setting up the monitor
1.1 Take out the monitor, stand and monitor base from the package.
1.2 Place the monitor base on the desk and then slide the neck
into the slots of base. (Make sure the direction of the neck is
correct.)
1. LCD Monitor
1.3 Hold the monitor and then slide the monitor into the neck. (Make
sure the direction of the neck is correct)
2. Monitor Base and Neck
(the shape of base may vary according to the monitor model)
2.Connecting signal cable
2.1 Switch off your computer
2.2 Connect the signal cable to the D-SUB port at the rear of
the monitor and tighten the connector screws
2.3 Connect the other end of signal cable to the computer's
VGA port and tighten the connector screws.
2.4 Note: Ensure the display setting does not exceed
1366 X 768 @ 60Hz.
3. Power Cord (plug may vary according to the electrical standards
for your area)
4. Analog Signal Cable
3.Connecting power
Connect one end of the power cable to the monitor and
the other end to a power outlet.
5. CD-ROM (contains user manual)
6 .Quick Installation Guide
4.Switching on
Switch on your computer.
POWER
D-SUB
You should now be able to see the picture. If not, see the
troubleshooting section of this guide.
- 2 -
Identifying parts and controls
Customizing Your Monitor
The On Screen Display (OSD) system provides a full range of customizable tools to
optimize your display.
1. The color of the LED light on the power button
LED light is bright blue when the monitor is fully operational, and it is orange when
inactive.
determines the monitor state. The
Although you could perform comprehensive customization, we
strongly recommend that you use the “AUTO ADJUSTMENT”
2.The function keys are used to adjust the settings of your monitor. For more information
on function keys, see "Function Keys Operation" on page 4.
Important:
function.
It can utilize the default values to thoroughly optimize the
performance of the display. Activate the OSD munu.
Working with OSD Group
Select the first button on the left
ADJUSTMENT” function.
to activate the “AUTO
You can identify the function of a button through the corresponding icon displayed on the
pop-up window of OSD. The following images show that the buttons on the monitor can
be used for multiple tasks.
In addition, we have also prepared other relatively simple methods to
change the display modes. There are 4 modes, which include:
GENERAL, MOVIE, PICTURE, GAME.
Important:
First Level
1. Press
button to start.
2. Press any of the rest 4 buttons to activate the OSD menu.
3. Press the corresponding function icon button on the pop-up window of the OSD.
- 3 -
Hotkeys
Auto-Adjustment
Brightness
Contrast
1.Auto Adjustment
General
Movie
English
Deutsch
Français
Italiano
Español
简体中文
繁體中文
日本語
When the OSD functions are displayed, press the first button on the left
you can automatically optimize the image performance.
2.Theme Mode Menu
, and then
to shift
Power
Theme Mode
Menu
Picture
Game
17 Lauguages control menu
User/Red
OSD Menu
Language
Main Menu
When the OSD functions are displayed, press the second button on the left
<
Color
Temperature
<
Norsk
the mode. You may press
and
to make adjustments between 4 modes.
Русский
Svenska
Suomi
User/Green
User/Blue
E
Press
, and then you can leave automatically.
Cool
Dansk
3.Main Menu
Warm
Polski
When the OSD functions are displayed, press the second button on the right
to
System
Recall
Nederlands
Portuquês
한국어
White Balance
Horizontal Position
Vertical Position
Phase
enter the main menu. And then press
Press to enter into the option. Press
or
to select the option.
E
or
to leave.
Clock
DDC/CI
DCR
Function Keys Operation
Demo
Information
The following illustration shows the options that can be accessed through the OSD main
menu.
To navigate through the OSD menu:
1. Activate the OSD main menu: Under the energized condition, press any function key to
execute the function.
2. Confirm the selection: Press the
button.
<
3. Browse the previous or next option: Press
and
.
<
4. Adjust the option value: Press
and
to adjust the value.
5. Return to the higher level menu. Press
to return to the higher level.
E
6. Exit: Press
to exit OSD menu; Or if you do not press any button, it will
automatically disappear after 30 seconds.
- 4 -
OSD Icon List
AUTO
ADJUSTMENT
* Adjust the monitor internal signal phase
* Optimize the picture performance automatically.
PHASE
CLOCK
DDC/CI
* Activate the built-in color engine to enhance the graphic
effects according to the different situations of the display.
contents
THEME MODE
* Adjust the monitor internal sampling clock rate
* Adjust the luminance level of the screen.
* Adjust the contrast level of the screen.
BRIGHTNESS
CONTRAST
* Select turn on or turn off DDC/CI function
* 2 seconds after activation of this function, some of the
menus will stimulate feature-grading effects 2 times over.
DEMO
OSD MENU
LANGUAGE
* Select your own preference of language of OSD menu.
* Show the frequency, resolution, input interface and other
operating details about this display.
* Select the setting of screen color-Cool, Warm or User.
* Cool: Select the setting of screen color to be bluish white.
* Warm: Select the setting of screen color to be reddish white.
INFORMATION
RECALL
COLOR
TEMPERATURE
* Reset monitor parameters back to factory preset values.
* Adjust the mechanical specifications regarding the display.
(White Balance, Clock, Phase, DDC/CI, DCR, DEMO,
Horizontal Position, Vertical Position, Information)
SYSTEM
SYSTEM
WHITE BALANCE
* Adjust the balance of the input signal.
HORIZONTAL
POSITION
* Shift the screen left or right
* Shift the screen up or down
VERTICAL
POSITION
DYNAMIC CONTRAST Display high dynamic contrast ratio, and present more
*
RATIO
colorful screen.
- 5 -
Troubleshooting
Symptom
Check Items
1.No picture
1. Check if the monitor is turned on (press the button
again).
2.LED indicator is not lit.
2. Check if the power cord is properly connected to the monitor and power outlet.
3 .Check if there is electricity coming from the power outlet (use another device to check for power).
1.No picture
1 Check if your computer is turned on.
2.LED indicator is orange
2 Ensure the computer is not in power saving mode (move the mouse or press a key on the keyboard
to wake up the computer).
3 Check if the video signal cable is properly connected to the monitor and computer.
1.Picture shows “ NO SIGNAL INPUT ”
1 Check if your computer is turned on.
2 Check if the video signal cable is properly connected to the monitor and computer.
1.Picture shows “ INPUT SIGNAL OUT OF RANGE ” 1. Ensure that the resolution and/or refresh rate is set correctly.
Make sure your display setup is under VESA 1366 X 768 at 60Hz
Important
- 6 -
Technical Features and Specifications
Description
Item
409.8(H) x 230.4(V) mm
Display Size
Panel
0.300(H) x 0.300(V) mm
D-sub
Pixel Pitch
Analog
Connector
Tilt Angle
-5° ~ 15°
Tilt
Dimensions
(W x H x D)
Net
About 440.4(W) x 353.6(H) x 200.0 (D) mm
About 3.3 kg
Weight
Power
Net
AC
Consumption
Horizontal
AC 100~240V, 50Hz/60Hz, 1.2A
Active:<25W / Standby:<1W
Interface
Frequency
30 ~ 83KHz
50 ~ 75Hz
Vertical
Temperature
Humidity
0°C to 40°C
Operating
Condition
10% to 90% (No Condensation)
0 ~ 10,000 ft.
Altitude
-20°C to 60°C
Temperature
Storage
10% to 90% (No Condensation)
0 ~ 40,000 ft.
Humidity
Altitude
Condition
- 7 -
|