Daewoo DV6T844B User Manual

DVD-VIDEO PLAYER

OwnerÕs Manual

Model : DV6T834N [Hi-Fi]

DV6T834B [Hi-Fi]

DV6T844N [Hi-Fi]

DV6T844B [Hi-Fi]

DV6T534N [MONO]

DV6T534B [MONO]

DV6T544N [MONO]

DV6T544B [MONO]

◆ In the initial settings, exclusive channel for DVD/Video is

set to CH 3. Set the TV channel to CH3 before using it.

◆ Region code of DVD/Video player for home is 1 or ALL. In

inserting a disc with other region code, it does not

operate. Please only use a disc with region code 1 or ALL.

◆

is a ÔProhibitionÕ mark. If this mark is displayed in

operating the product, please wait for a while, then use

it. If " Prohibition" mark continues to be displayed in

pressing a button after that, it means the button does

not function in the currently played disc.

◆ Press a product button on the remote control then use

the product.

¥ DVD operation : [DVD] button

¥ Video operation : [VCR] button

Important Safeguards

The lightning flash with arrowhead symbol,

CAUTION

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

Òdangerous voltageÓ within the productÕs

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO

USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

servicing instructions in the literature

accompanying the appliance.

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

IMPORTANT FOR LASER PRODUCTS

¥ LASER :

This Digital Video Disc Player employs a Laser System. To ensure proper use of this product please

read this ownerÕs manual carefully and retain for future reference. Should the unit require

maintenance, contact an authorized service location - see service procedure.

Use of control adjustments or the performance of procedures other than those specified may result

in hazardous radiation exposure.

To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser

radiation when open and interlocks defeated.

DO NOT STARE INTO THE BEAM.

¥ DANGER : Visible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

CLASS 1

LASER PRODUCT

¥ CAUTION : Do not open the top cover. There are no user serviceable parts

inside the Unit; leave all servicing to qualified service personnel.

FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rule. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception; which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

¥ Reorient or relocate the receiving antenna.

¥ Increase the separation between the equipment and receiver.

¥ Connect the equipment to an outlet on a circuit different from that to which the receiver is

connected.

¥ Consult the dealer or an experience radio/TV technical for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) This device must

accept any interference received, including interference that may cause undesired operation.

CAUTION: Any changes or modification in construction of this device which are not expressly approved by

the party responsible for compliance could void the userÕs authority to operate the equipment.

Important Safeguards

This set has been designed and manufactured to

assure personal safety. Improper use can result in

electric shock or fire hazard. The safeguards

incorporated in this unit will protect you if you

observe the following procedures for installation, use

and servicing. This unit is fully transistorized and does

not contain any parts that can be repaired by the

user.

Ventilation

information with respect to proper grounding of

the mast and supporting structure, grounding of

the lead-in wire to an antenna-discharge unit,

connection to grounding electrodes, and

requirements for the grounding electrode. See

example as shown.

21 Servicing

Slots and openings in the case are provided for

ventilation to ensure reliable operation of the unit

and to protect it from overheating. These openings

must not be blocked or covered. These openings

must not be blocked by placing the unit on a bed,

sofa, rug, or other similar surface. This unit should

never be placed near or over a radiator or heat

radiator. This unit should not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the

manufacturerÕs instructions have been adhered to.

Do not attempt to service this unit yourself as

opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

22 Damage Requiring Service

Unplug this unit from the wall outlet and refer

servicing to qualified service personnel under the

following conditions.

A. When the power-supply cord or plug is

damaged.

B. If liquid has been spilled, or objects have fallen

into the unit.

C. If the unit has been exposed to rain or water.

D. If the unit does not operate normally by

following the operating instructions.

only those controls that are covered by the

operating instructions. Improper adjustment of

other controls may result in damage and will

often require extensive work by a qualified

technician to restore the unit to its normal

operation.

E. If the unit has been dropped or the cabinet has

been damaged.

F. When the unit exhibits a distinct change in

performance-this indicates a need for service.

EXAMPLE OF ANTENNA

GROUNDING

ANTENNA LEAD

IN WIRE

Read Instructions

All the safety and operating instructions should be

read before the unit is operated.

Retain Instructions

The safety and operating instructions should be

retained for future reference.

Heed Warnings

All warnings on the unit and in the operating

instructions should be adhered to.

FOLLOW INSTRUCTIONS

All operating and use instructions should be

followed.

GROUND CLAMP

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

10 Power Sources

ELECTRIC

SERVICE

EQUIPMENT

GROUND CLAMPS

This unit should be operated only from the type of

power source indicated on the marking label. If you

are not sure of the type of power supply to your

home, consult your dealer or local power company.

For units intended to operate from battery power,

or other sources, refer to the operating

instructions.

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250 PART H)

NEC

NATIONAL ELECTRICAL CODE

Adjust

14 Power Lines

An outside antenna system should not be located

in the vicinity of overhead power lines, other

electric light or power circuits, or where it can fall

into such power lines or circuits. When installing

an outside antenna system, extreme care should

be taken to keep from touching or approaching

such power lines or circuits as contact with them

might be fatal. Installing an outdoor antenna can

be hazardous and should be left to a professional

antenna installer.

11 grounding or Polarization

This unit is equipped with a polarized alternating -

current line plug (a plug having one blade wider

than the other). This plug will fit into the power

outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet,

try reversing the plug. If the plug still fails to fit,

contact your electrician to replace your obsolete

outlet.To prevent electric shock, do not use this

polarized plug with an extension cord, receptacle,

or other outlet unless the blades can be fully

inserted without blade exposure. If you need an

extension cord, use a polarized cord.

Cleaning

Unplug this unit from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

Attachments

23 Replacement Parts

15 Lightning

Do not use attachments unless recommended by

the unitÕs manufacturer as they may cause

hazards.

When replacement parts are required, have the

service technician verify that the replacements he

uses have the same safety characteristics as the

original parts. Use of replacements specified by

the unit manufacturer can prevent fire, electric

shock, or other hazards.

For added protection for this unit during a lightning

storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet

and disconnect the antenna or cable system. This

will prevent damage to the unit due to lightning

and power line surges.

Water and Moisture

Do not use this unit near water- for example, near

a bath tub, wash bowl, kitchen sink or laundry

tub, in a wet basement, or near a swimming pool

and the like. Caution : Maintain electrical safety.

Powerline operated equipment or accessories

connected to this unit should bear the UL listing

mark or CSA certification mark on the accessory

itself and should not be modified so as to defeat

the safety features. This will help avoid any

potential hazard from electrical shock or fire. If in

doubt, contact qualified service personnel.

12 Power-Cord Protection

Power-supply cords should be routed so that they

are not likely to be walked on or pinched by items

placed upon or against them, paying particular

attention to cords at plugs, convenience

receptacles, and the point where they exit from

the unit.

24 Safety Check

16 DISC TRAY

Upon completion of any service or repairs to this

unit, ask the service technician to perform safety

checks recommended by the manufacturer to

determine that the unit is in safe operating

condition.

Keep your fingers well clear of the disc as it is

closing. It may cause serious personal injury.

17 Overloading

Do not overload wall outlets of extension cords as

this can result in a risk of fire or electric shock.

18 Object and Liquid Entry

Note to CATV system installer

25 Wall or Ceiling Mounting

This reminder is provided to call the CATV system

installerÕs attention to Section 820-40 of the NEC

which provides guidelines for proper grounding

and, in particular, specifies that the cable ground

shall be connected to the grounding system of the

building, as close to the point of cable entry as

practical.

The product should be mounted to a wall or ceiling

only as recommended by the manufacturer.

26 Heat

Never push objects of any kind into this unit

through openings as they may touch dangerous

voltage points or Òshort-outÓ parts that could

result in a fire or electric shock. Never spill liquid

of any kind on the unit.

Accessories

Do not place this unit on an unstable cart, stand,

tripod, bracket, or table. The unit may fall, causing

serious injury to a child or adult as well as serious

damage to the unit. Use this unit only with a cart,

stand, tripod, bracket, or table recommended by

the manufacturer.

The product should be situated away from heat

sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce

heat.

19 BURDEN

13 Outdoor Antenna Grounding

Do not place a heavy object on or step on the

product. The object may fall, causing serious

personal injury and serious damage to the product.

If an outside antenna or cable system is connected

to the product, be sure the antenna or cable

system is grounded so as to provide some

protection against voltage surges and built-up

static charges. Section 810 of the National

Electrical Code, ANSI/NFPA No. 70-1984 (Section

54 of Canadian Electrical Code, Part 1) provides

8A A unit and cart combination should be moved with

care. Quick stops,

PORTABLE CART WARNING

(symbol provided by RETAC)

20 DISC

excessive force, and

Do not use a cracked, deformed or repaired disc.

These discs are easily broken and may cause

serious personal injury and product malfunction.

uneven surfaces may

cause the unit and cart

combination

overturn.

Advantages of This Product Are .....

Read Carefully before Using

Cautions in use of DVD-Video player are described below.

¥ DVD, VCD, CD, CD-R(MP3), CD-RW, VHS

playback function

and search of track and time in VCD and CD

¥ Various TV aspect (DVD)

Checking and Replacement of Antenna

Please read carefully before using a DVD-Video player.

¥ Antenna is subject to change in its direction or

damage by wind and rain. For clean screen,

¥ Watching DVD for recording broadcast

¥ Integrated remote control (VCR, DVD)

¥ VISS function

4:3 for Pan and Scan, 4:3 for Letter Box, and 16:9

for Wide

contact and consult your nearest service center

Installation place and handling

¥ When you place this player near other devices,

they may affect poorly together.

about checking and replacement.

¥ Repeat playback (title and chapter for DVD,

track and disc for VCD/CD)

In recording important screen

¥ When you place DVD-Video player and TV in the

upper and lower sides, it may cause flickering of

pictures or failure (tape is not ejected).

¥ When you place this player near strong magnetic

materials, it may affect image or voice poorly or

damage recording.

¥ Do not spill volatile liquids like insect spray over

the player. Do not leave rubber or plastic products

in contact with the player for a long time. They

will cause deterioration or paint peel-off.

¥ Multiplex sound playback/record

¥ Be sure to record the screen and check whether

recording is performed properly. We beg you to

understand compensation of recording if recording

is not performed by badness of used tape or video.

¥ Repeat a defined period from A to B (DVD)

¥ Selective Play (DVD/VCD/CD)

¥ High Sound Quality of 6 head Hi-Fi (Hi-Fi

Model only)

¥ One Touch timer Recording (OTR)

You can select and play the desired title / chapter

of DVD and track of Video CD/CD in STOP mode.

¥ MP3 file playback function (CD-R disc having

records of MP3 files)

¥ Do not use your recordings without permission of a

copyrighter except personal usage.

¥ Various languages OSD (On Screen Display)

function (DVD)

¥ GUI (Graphical User Interface) OSD (On Screen

Display)

You can select and display OSD among various

languages. (English, French, Spanish)

Tape and Disc Handling

¥ Do not use any tape and disc below. Damage of

video head or cut/coiling of tape may cause

failure.

By using the [DISPLAY] button on the remote

control, information on the DVD/VCD/CD player and

disc, can be displayed on the TV screen.

Not in use

¥ Parental Lock function (DVD)

¥ When the unit is not in use, be sure to remove the

disc or tape and turn off the power.

This function can prevent playback of software that

may be unsuitable for children.

- Tape with mold

¥ If you do not use the unit for a long period,

remove batteries in remote control to prevent

leakage.

¥ In case you donÕt use the unit for a long time, the

unit may not function properly in the future. Turn

on and use the player occasionally.

¥ Screensaver function (DVD)

- Tape or disc stained with juice or attachments

- Tape having breakage connection

- Disassembled tape

¥ 3D sound (3D sound effect using 2 speakers)

¥ Multi Audio function (DVD)

¥ High bit / high sampling with 27MHz / 10bit

video encoder

The audio soundtrack can be heard in up to 8

languages. In the case of SVCD or CVD, it depends

on the disc. (The number of audio languages

depends on the software.)

- Disc with severe scratch

¥ Moisture condensation may occur in tape. Moisture

condensation damages the tape. Please use the

tape after the moisture condensation is

disappeared.

¥ After use, store tape vertically in a case to prevent

loose.

This unit has 27MHz / 10bit capability, that enables

the faithful reproduction of fine images.

Moving

¥ Multi Subtitle function (DVD)

¥ Repack the unit as it was originally packed at the

factory. Alternatively, pack this product with

towel not to be damaged.

¥ High bit / high sampling with 96KHz / 24bit

audio D/A converter

The subtitle can be seen in up to 32 languages. In

the case of SVCD or CVD, it depends on the disc.

(The number of subtitle languages depends on the

software.)

¥ Do not store the following places.

With this 96KHz / 24bit linear Pulse Code Modulated

signals, which constitute the highest specifications

in the DVD standards, you can enjoy faithfully

reproduced sound in all of its various modes. To

support 96KHz sampling / 24bit sound, the shaping

noise of this multi-level digital sigma type of D/A

converter is kept flat up to 44KHz, thus preventing

the important audio signals from being affected.

¥ Eject any videotape.

- High temperature and humidity

- Subject generation of mold

- Subject to direct sunlight

Cleaning

- Much dirt or dust

¥ Multi Angle function (DVD)

¥ Dust off dirt in cabinet or control panel part

smoothly with a soft cloth.

¥ For heavy dirt, soak the cloth in a weak detergent

solution, wring it well and wipe. Use a dry cloth

to wipe it out.

- Near strong magnetic materials such as speaker

This function allows you to choose the viewing angle

of scenes which were shot from a number of

different angles. (The number of angles depends on

the software.)

◆

Instructions in using remote control

¥ Operate remote control within 7m from the unit.

¥ Do not press 2(two) buttons at the same time.

¥ Do not light up sending part of remote control.

¥ Do not keep in the place with much dust and

humidity.

¥ Follow instructions in using chemical cleaners.

¥ Coaxial digital output (PCM, Dolby Digital, dts)

¥ Screen zoom function (DVD/VCD)

¥ Do not use any type of solvent such as gasoline or

benzene, as they may cause deterioration or paint

peel-off.

You can enjoy high-level digital audio by connecting

with amp embedded with Dolby Digital / dts

decoder.

Checking

¥ Built-in Dolby Digital decoder (DVD)

¥ Video is a high precision device. To obtain a clear

screen, we recommend regular inspection and

maintenance every 1,000 hours of use by technical

engineers.

¥ For checking, contact your dealer or your nearest

service center.

¥ Analog audio 2-channels output for DOWNMIX

(x1)

¥ Composite video out (x1)

¥ Slow Forward / Reverse (DVD) playback

¥ Fast Forward / Reverse playback

¥ Search of title, chapter, and time in DVD disc,

Contents

Identification of Controls

Product Information

DVD Operation

Front panel

Important Safeguards ................................. 1

Advantages of This Product Are .... ............... 4

Read Carefully before Using ......................... 5

Contents ................................................ 6

Identification of Controls ............................ 7

Remote Control ...................................... 10

Playing a desired scene.............................. 32

Confirming the current PLAY mode on screen .. 35

AUDIO language, SUBTITLE language

✔

DV6T834N, DV6T834B, DV6T534N, DV6T534B

and 3D AUDIO ......................................... 36

ZOOM, Multi Angle and Digest play................ 37

About MP3 discs ...................................... 38

Displaying menus in a disc. ......................... 39

$ % ^& *

DV6T844N, DV6T844B, DV6T544N, DV6T544B

(

)

5 21 4 3

Installation

✔

Connecting with TV .................................. 11

Connecting with Cable Box ........................12

Connecting with Other Video Equipment ........ 13

Connecting with an Analog Audio ................. 14

Setup

LANGUAGE Setup ..................................... 39

VIDEO Setup ........................................... 40

AUDIO Setup .......................................... 40

Others Setup .......................................... 41

Connecting with a Dolby Digital decoder or DTS

decoder ................................................ 15

$ % ^&

(

)

1234 5

Basic Operation

The others

Power (STANDBY/ON) button

Use to power the device on/off if AC power supply

is connected.

Place to insert videotape

Disc tray

Video input jack

Audio input jack

Eject button

Record button

Channel Up/Down button

Operation Display Window

Display operation of device. For more information,

see ÒOperation Display WindowÓ in the next page.

Select button

Use to change DVD mode to VCR mode, and vice

versa.

Stop button

Use to stop playing.

Rewind button

Use to rewind currently being played videotape or

disc; or to playback back rapidly.

Playback/PAUSE button

Playback videotape or disc.

Press this button to pause a screen.

Fast Forward button

About DVD ............................................. 42

Basic information about VCR and Videotape.... 44

Before doubting about troubles (DVD) ........... 45

Before doubting about troubles (VCR)............ 46

Specifications ......................................... 48

Warranty

Output Select ......................................... 16

Clock Set ............................................. 17

DVD Playback ......................................... 18

VCR Playback ........................................ 19

(

Use to wind currently being played videotape or

disc; or to playback rapidly.

Open/Close Tray button

VCR Operation

Memorizing TV Channels ........................... 20

Recording ............................................. 22

Timer Recordings ................................... 24

Watching and Recording Cable TV ................ 27

Using advanced features ........................... 28

Hi-Fi Stereo Playback (Hi-Fi Model only) ........... 31

)

Identification of Controls

Operation Display Window

Rear Panel

✔

DV6T834N, DV6T834B, DV6T844N, DV6T844B [Hi-Fi]

VCR Operation

REC and TIMER REC display

# $ %

^ &

Recording ,

TIMER Recording ,

To be Timer-recorded,

To be Timer-recorded state ERROR

(No Tape or Tape without tab)

dts Disc Indicator

Track

# $

(

✔

DV6T534N, DV6T544N, DV6T534B, DV6T544B [MONO]

^ &

Chapter This is displayed in DVD disc.

Time, Counter and Current

Operation

Tray is opened

Tray is closed

Disc is loaded

There is no disc in tray

Disc has some error

Menu screen is displayed

Setup menu is displayed

Power is ON

COMPONENT Out Jack

To obtain better screen quality, connect the unit

to TV or monitor with COMPONENT(480i) input.

(

Power Cord

It is a jack for supplying power to the unit.

Connect to outlet in a wall.

Power is OFF

3D Sound Indicator

Digital Output (COAXIAL) Jack

(

S-Video Output Jack

A/V Output Jack

A/V Input Jack

Connection to Antenna Cable

Connection to TV

DVD Disc Operation

To enjoy sound quality of theater level in home,

connect this jack with amp or unit embedded with

digital audio decoder.

AUDIO Out Jack

Accessories

Connecting cable to

Audio/Video jack

OwnerÕs Manual/

Warranty

Remote Control

2 Batteries

RF cable

¥ To purchase accessories or not supplied parts additionally, contact your nearest dealer or service center. But,

ownerÕs manual and warranty are not sold additionally.

Remote Control

Connecting with TV

■ In the initial SET, exclusive channel for video is set to CH 3. To change this setting, set again in ÒCHANNEL

^[DVD]MENU button

@ POWER button

SETÓ screen in VCR operation.

■ In connecting RF cable to TV, set TV channel to CH3.

^[DVD]TITLE /PBC button

^[DVD]OPEN/CLOSE button, ^[VCR]EJECT button

Various methods in connecting with TV

^{[DVD, VCR]}MOVE/SELECT in OSD, ^[VCR]Channel

Up/Down button

^ SETUP button

(

^[DVD]REPEAT Playback button

^[DVD]REPEAT a defined period from A to B button

^[DVD]PREVIOUS button (move into a previous

chapter or track)

Method 1

“

) REVERSE SEARCH button

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PRESONNEL.

^[VCR]TIMER RECORDING button, ^[DVD]PROGRAM

button

AUDIO

Method 2

‘

(

^{[DVD, VCR]}CLOCK/COUNTER button

^{[DVD, VCR]}TV/VCR button

^[VCR]Record button

VIDEO

)

Method 3

Method 4

^{[DVD, VCR]}NUMBER button , ^[VCR]TRACKING Ð/+

button

6 VCR SELECT button

S-VIDEO

Method 1

7 DVD SELECT button

Remove circular cable (RF cable) (surplus cable) plugged in ÒANT.INÓ Jack in rear panel of TV. Connect the

cable to ÒANT.INÓ jack in rear panel of DVD-Video. Connect TV to DVD-Video. Connect ÒRF OUTÓ jack in DVD-

Video with ÒANT.INÓ jack in TV with RF cable.

^{[DVD, VCR]}OSD DISPLAY button

9 OUTPUT Selection button

0 ENTER button

^Method2 ^{: Connecting to a TV that has a audio/video in jacks}

“ CLEAR/3D button

Connect VIDEO OUT jack in DVD-Video to VIDEO IN jack in TV, and AUDIO OUT jack in DVD-Video to AUDIO IN

jack in TV with connecting cable of Audio/Video jack. Select VCR mode by pressing TV/INPUT button in TV, you

can view more clear screen and sound than connection with RF cable only.

‘

^[DVD]AUDIO LANGUAGE Select, ^[VCR]AUDIO Select

button

^[DVD]SUBTITLE Select button

^Method3 ^{: Connecting to a TV that has a component video in jacks}

^[DVD]NEXT button (Move into a next chapter or

track) , ^[VCR]Frame Advance button in pause

mode

Use a component video cable (commercially available) in place of the yellow video cable to enjoy higher quality

pictures. The component video connection only supplies video (picture) in the DVD mode of the DVD-Video.

Therefore, in order to use the VCR features or view TV channels at the DVD-Video, you still need to either

connect the RF coaxial cable between the ANT-OUT jack of the DVD-Video and the TVÕs Antenna In jack, or

connect the video cable.

Child Lock!!!

Press the power [√] button of the remote control

for about 8 seconds. No buttons of front panel and

remote control can be operated now and Lock

Q PLAY/PAUSE button

q FORWARD SEARCH button

W STOP button

Method 4 : Connecting to a TV that has a S-Video in jacks

indicator (Ò

Ó) will be displayed on window

display. To release child lock, press the power [√]

button of the remote control for about 8 seconds.

Use a S-Video cable (not supplied) to enjoy higher quality pictures.

^[DVD]Chapter/Title/Time SEARCH button

^[DVD]ZOOM button

VHF: 2 ~13 channels of TV , UHF: 14~69 channels of TV, CATV: Broadcasting is transmitted with cable from

broadcasting station by contract with the station and consumers. It does not need any antenna.

^[DVD]ANGLE, ^[VCD]DIGEST, ^[VCR]Record SPEED

button

In/Out jack in Audio/Video terminal: - In: A jack used to receive signal required in this unit from other units.

Out: A jack used to send signal of this unit to other units.

^[VCR]100 button

Connect with Audio/Video terminal, you can enjoy more clear video and audio. (Use OUTPUT button in this remote

control to select video mode.)

If screen is broken in connecting COMPONENT Out to Pr, Pb, Y of TV COMPONENT In jack , connect to Cr, Cb, Y.

Connecting with Cable Box

Connecting with Other Video Equipment

■ You can connect a wide variety of audio/video equipment to your DVD-Video, including : an additional VCR,

Laser Disc Player, DVD Player, Camcorder, Satellite Receiver, Video Game. Since all of these devices use

essentially the same connections, they will be described together.

■ You should install a distributor additionally.

How to connect

How to Connect

INPUT 1 INPUT 2

OUT

ANT IN

CAUTION

RF Cable

OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PRESONNEL.

RF Cable

AUDIO/VIDEO Cable

Playback VCR,

Camcorder,

Satellite

Receiver ...

...

AUDIO

VIDEO

If your cable system only requires

you to use a converter box for

some channels

AUDIO/VIDEO Cable

...

RF Cable

OUT

(i.e., pay-TV channels), follow these

steps: Find the primary incoming RF

cable. Plug this cable into a splitter

(available at your local electronics

store.) Connect one RF cable

OUT

Connect Audio/Video Out jack in other video equipment to Audio/Video In jack in rear panel (or front

panel) of DVD-Video with connecting cable.

Connect ÒANT. INÓ jack in TV to ÒRF.OUTÓ jack in DVD-Video with RF cable.

between one OUT terminal on the

To record contents of other video equipment with DVD-Video, insert recording tape attached recording tab

in DVD-Video.

splitter and the IN terminal on the converter box.

Connect another RF cable between the other OUT terminal on the splitter and the A-IN terminal on an A/B

switch (available at your local electronics store.) Connect a third RF cable between the OUT terminal on the

converter box and the B-IN terminal on the A/B switch.

Connect a RF cable between the OUT terminal on the A/B switch and the ANT. IN on your DVD-VIDEO.

When the A/B switch is in the B position, use the converter box to change channels ; when the A/B switch is in

the A position, use the DVD-VIDEO to change channels.

How to Copy(Edit) Tape with Other Video Equipment

Turn on DVD-Video.

How to watch general broadcasting with recording CATV

Press [OUTPUT] button of remote control and adjust DVD-Video to display ÒExternal Input 1Ó or ÒExternal

Input 2Ó in TV screen.

Set Channel Select switch of Converter Box to CH 3 or 4 as same as video exclusive channel. Press [SET]

button in [VCR] operation to set video exclusive channel in ÒCHANNEL SETÓ screen.

Press [PLAY] button in other video equipment.

Press [REC] button in DVD-Video if you want to record contents of other video equipment.

Press [Pause] button in DVD-Video when unnecessary or undesired scene is displayed in recording.

Press channel button of Converter Box to select channel to be recorded. In this case, if you want to watch

CATV to be recorded, press [TV/INPUT] button of TV to select ÒOut (VCR)Ó.

(Caution) Recording is released automatically after 5 minutes since pressing [PAUSE] button. Press [REC]

button if you want to record again.

Press [REC] button in DVD-Video.

To watch general broadcasting, press channel button in TV to select the desired channel.

For some types of TV, you should press [TV/INPUT] button in TV remote control and convert from Out 1( VCR 1) or

Out 2(VCR 2) mode to Broadcasting Channel mode to change TV channel.

Change channel selection of CATV receiver in recording, contents of recording is changed.

Connecting with an Analog Audio

Connecting with a Dolby Digital decoder or DTS decoder

How to Connect

CAUTION

RISK

SHOCK

OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PRESONNEL.

CAUTION

RISK

SHOCK

OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PRESONNEL.

VIDEO

S-VIDEO

20 18 16 14 12 10

21 19 17 15 13 11

<Home Theater Receiver with

Dolby Digital decoding capability>

AUDIO

COAXIAL

AUDIO

Connect Audio jack. Connect AUDIO OUT in rear panel of DVD-Video to In jack of stereo sound unit.

For Input Select in stereo unit, Select ÒExternal InputÓ connected with DVD-Video.

Playback DVD disc or Hi-Fi videotape, you can hear sound in speaker of stereo unit.

If using this DVD-Video to play a DVD disc in 5.1 channel Dolby Digital Surround, or DTS surround formats, the

DVD-Video outputs a Dolby Digital, or DTS data stream from its COAXIAL DIGITAL AUDIO OUT jack. By

hooking the DVD-Video up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic

ambience with powerful and high-quality surround sound of a professional standard such as can be heard in

movie theaters.

Use an audio coaxial digital cable (not included) for the audio connections.

Manufactured under license from Dolby Laboratories.

ÒDolbyÓ and the double-D symbol are trademarks of Dolby Laboratories.

Output Select

To Select DVD

Press [DVD] button.

Clock Set

■ Set TV to CH 4( or 3).

■ Press [VCR] button on remote control to change into VCR mode and follow the

procedures below.

SETUP

If DVD mode is correctly selected, DVD on the operation display window is lighted.

Then, remote control button works as DVD function. Press the [DVD] button, then

the mode of DVD-Video Player becomes to the DVD OPERATION mode.

Press [SETUP] button.

Press [ENTER] button to select CLOCK SET.

CLOCK SET

TIMER RECORDINGS

CHANNEL SET

FUNCTIONS

LANGUAGE SELECT

Select Time and Date Set with [ENTER]button

in CLOCK SET screen.

ENTER

Select:

Move:

SETUP

End:

To Select VCR

Press [VCR] button.

If VCR mode is correctly selected, VCR on the operation display window is

lighted. Then, remote control button works as VCR function. Press the [VCR]

button, then it becomes to the VCR OPERATION mode.

CLOCK SET

Time and Date Set

Auto DST : ON

ENTER

Move:

SETUP

Select:

End:

TIME AND DATE SET

Set the current date and time with [ ,

] button or [NUMBER] button.

Time

- - : - -

(hh:mm)

To Select Watch Modes or External Input

Press [OUTPUT] button.

Date

- - / - - / 20 - -

Input:

For DATE SET, follow the order of Month / Day /

Year ; for TIME SET, follow the order of Hour /

Minute in CLOCK SET screen.

Whenever you press [OUTPUT] button, VCR PLAYBACK, BROADCASTING RECEPTION and EXTERNAL INPUT is

selected in order.

Move:

SETUP

End:

TIME AND DATE SET

If CLOCK SET is completed, press

[SETUP] button.

Time

11 : 01 AM

Date

05 / 24 / 2003 (Sat)

(mm/dd/yy)

Move:

SETUP

Input:

End:

DVD Playback

VCR Playback

Press [√] button to power on.

Press [DVD] button of remote control to change into DVD mode.

Press [VCR] button of remote control to change into VCR mode.

Insert the desired tape.

Press [OPEN/CLOSE] button to open the disc tray.

Place a disc firmly on the disc tray, making its label look upward.

If you want to playback it, press [PLAY/PAUSE] button.

When the operational status is flickering or poor, adjust it with [TRACKING +/Ð]

button.

Insert the disc and press [OPEN/CLOSE] button to close the tray.

The disc tray is closed and after checking the discÕs condition, Playback or Stop

function starts to operate.

To stop it, press [ ] button.

For pause, press [PLAY/PAUSE] button in playback mode.

If you press this button once more, it starts playback again.

To playback it, press [PLAY/PAUSE] button.

In the case of DVD,

DVD menus and titles are displayed on TV screen.

In the case of S-VCD and VCD2.0

Press [EJECT] button in the front part or [OPEN/CLOSE] button

on remote control to remove the tape.

the menus are displayed on TV screen and it is converted into PBC

(Playback Back Control) mode.

In the case of CD, VCD1.1 and MP3,

the disc plays in order of its track numbers.

Various Playback Methods

■ If you want fast forward (or reverse) playback, press [√√] or [œœ] button in

To stop it, press [ ] button.

For pause, press [PLAY/PAUSE] button in playback mode.

If you press this button once more, it starts playback again.

Playback mode. You can watch fast playing (rewinding) screen.

■ If you want Still picture, press [PLAY/PAUSE] in Playback mode. You can watch

If you press no

button in 5 minutes

after you are opened

the tray, the player

closes the tray

the desired screen in pause status.

■ If you want slow-motion playback, press [√√] button in Pause mode. You can

Press [OPEN/CLOSE] button to remove the disc.

watch the desired screen in the slow forward playback.

* NOTE: VCR doesnÕt have Slow Reverse Playback function.

automatically to

prevent from damage.

■ If you want to watch a series of screens one by one, (FRAME ADVANCE) press

[NEXT

] button in Pause mode. Each time you press this button, the picture

advances one frame.

If the product, which

has a auto-detector,

detects a

Various Playback Methods

■ If you want fast (or reverse) playback, press [√√] or [œœ] button in Playback mode.

contaminated

To Adjust Display

You can watch fast playing (reverse ) screen.

head(s), it shows the

conditions to notice

the contamination on

screen.

* This reverse playback can be unavailable for certain DVD. Unavailable for MP3.

This product includes automatic Tracking function and enables users to enjoy clear

picture without an additional operation. Provided that the following problems can be

solved by the manual adjustment, which improves display quality. (During automatic

display adjustment, ÒAdjusting DisplayÓ are displayed on TV screen.)

■ If you want slow (or reverse) playback, press [√√] or [œœ] button in Pause mode.

You can watch the desired screen in the slow forward (reverse) playback.

* In case of the notice

on screen, please

rub the heads with a

head-cleaner

followed by ÒHow to

use a head-cleanerÓ.

* For the case of Video CD, this reverse slow playback function is unavailable. The

will appear.

mark

- If the screen is poor in Playback mode,

- If noises occur in the upper or lower part of screen in slow playback mode,

- If paused picture vibrates up and down.

■ If you want still picture, press [PAUSE] button in Playback mode. You can watch the

desired screen in Pause status.

Use [TRACKING +/Ð] buttons of remote control to adjust the display suitable for

watching.

Memorizing TV Channels

To Memorize Automatically Channels

To Delete Channels Manually

SETUP

■ After memorizing automatically channels, when the same broadcasting is memorized in more than two

Press [SETUP] button.

Press [ ] button to move

SET, and then select CHANNEL SET with

[ENTER] button.

CLOCK SET

channels, or you want to delete badly displayed channels, follow the procedures below.

TIMER RECORDINGS

CHANNEL SET

FUNCTIONS

into CHANNEL

ADD/REMOVE CHANNELS

1 Press [SETUP] button and select

LANGUAGE SELECT

ÒCHANNEL SETÓ. Select ÒAdd/Remove

Channel 02

is now REMOVED.

ChannelsÓ.

CHANNEL SET

Select ÒAUTO CHANNEL SEARCHÓ.

Press [ENTER] button in CHANNEL SET window

to select AUTO CHANNEL SEARCH.

2 Select the desired channel and delete it.

Auto Channel Search

Add/Remove Channels

Signal Type:

Cable Box Setup

Channel Change:

Press [NUMBER] button of remote control to select the desired channel to delete.

CABLE

CH3

When [<] button is pressed, ÒADDEDÓ under the channel number converts into

ÒREMOVEDÓ.

To check the deleted channel, press [CH+/Ð] button on remote control.

AUTO CHANNEL SEARCH

Select ÒDetect AutomaticallyÓ.

Press [ENTER] button in AUTO CHANNEL SEARCH

window to detect the channel automatically.

What type of signal are you

using?

Cable TV

Antenna

Detect Automatically

Selecting cable or antenna viewing

Channel number changes successively from 01

to 125, while only broadcasting channels are

memorized automatically. When memory

process is completed, the lowest numberÕs one

of memorized channels is displayed.

■ You must set the viewing mode for your VCR, choosing either CABLE (cable system connection) or ANTENNA

(antenna connection).

AUTO CHANNEL SEARCH

CHANNEL SET

To set the viewing mode:

Now scanning channel 11

Auto Channel Search

Add/Remove Channels

Signal Type:

Cable Box Setup

Channel Change:

Press [ENTER] to toggle the setting between CABLE and

ANTENNA in CHANNEL SET screen.

CABLE

CH3

When the desired viewing mode is displayed, press

[SETUP] twice to exit.

Please, check the memorized channels.

To check the memorized channels, press [CH+/Ð] button on remote control.

To Set Cable Box

CHANNEL SET

To Memorize Channels Manually

Press [SETUP] button and select

ÒCHANNEL SETÓ.

Select ÒCable Box SetupÓ.

Auto Channel Search

Add/Remove Channels

Signal Type:

Cable Box Setup

Channel Change:

■ When the desired broadcasting finished or you want to add unmemorized channels owing to poor signals to

CABLE

CH3

the memory, follow the procedures below.

CHANNEL SET

Press [SETUP] button and select

ÒCHANNEL SETÓ.

Select ÒAdd/Remove ChannelsÓ.

Auto Channel Search

Add/Remove Channels

Signal Type:

Cable Box Setup

Channel Change:

CABLE BOX SETUP

Select ÒCable Box ChannelÓ.

CABLE

CH3

On what channel do you

want to receive from

the cable box?

- -

Press the channel number which matches to the

output of the Cable Box to connect between

Cable Box and this unit.

ADD/REMOVE CHANNELS

Select the desired channel and memorize it.

Press [NUMBER] button of remote control to

select the desired channel to memorize.

Channel 02

is now ADDED.

To Set Output Channel

CHANNEL SET

Press [SETUP] button and select ÒCHANNEL

SETÓ . Select ÒChannel ChangeÓ.

By pressing [ENTER] button, set the exclusive channel

for video on the desired one of CH3 or CH4.

When [>] button is pressed, ÒREMOVEDÓ under

channel number converts into ÒADDEDÓ.

Auto Channel Search

Add/Remove Channels

Signal Type:

Cable Box Setup

Channel Change:

CABLE

CH3

Check the memorized channel.

To check the memorized channel, press [CH+/Ð] button on remote control.

Recording

To Record With VCR

To Record From DVD To Videotape during DVD playback

Press [√] button to power on.

Press [DVD] button of remote control to change into DVD mode.

Insert the desired DVD disc.

Press [VCR] button of remote control to change into VCR mode.

Power on TV and select Ch 3, or press [INPUT] button of TV set to select

External Input mode.

When it is a DVD disc with copy protect function, you canÕt copy it.

Insert a recordable tape.

Play the DVD disc and press [REC] button.

Insert a recordable tape.

Insert a tape with recording tab.

DVD plays and VCR starts recording.

To exit copy, press [ ] button.

Also it stops automatically when DVD playback is finished or recorded tape is

reached to the end.

With [CHANNEL], [NUMBER] and [OUTPUT] buttons, select the

desired broadcasting channel or external input unit to record.

This product incorporates copyright protection technology that is protected by method claims of certain U.S

patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.

Select the desired speed (SP or SLP) with [SPEED] button.

Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended

for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.

Reverse engineering or disassembly is prohibited.

Press [REC] button.

Then, it starts recording.

One Touch timer Recording (OTR)

■ When your urgent business happens suddenly in watching TV or you want to record the current TV program

If you want to pause recording, press [PAUSE] button.

After pressing [PAUSE] button, if the pause status continues for five minutes,

the recording is released automatically.

for the desired time, follow the procedures below.

First, follow the steps 1 to 4 in ÒRecording With VCRÓ.

Press [REC] button as much as you want. See the ÒRecording Times TableÓ below.

To exit recording, press [STOP] button.

Once ......... continuous recording until you press STOP button

Twice ........ recording for 30 mins from current time

3 (times)..... recording for 1 hour

9 .............. recording for 4 hours

10 ............ returning to the status of Once Press

To Enjoy Another TV Channel or DVD during recording

To stop Recording mode, press [STOP] button more than 5 seconds.

If you want to watch another TV channel during recording with video, press

[TV/VCR] button.

It is available of changing into and watching another TV channel by pressing TV

[CHANNEL] buttons.

If you want to playback DVD during recording with video, insert a DVD disc.

Place the desired DVD disc on DVD tray, press [DVD] button to convert OUTPUT into

DVD mode and press [PLAY] button. Then, you can watch DVD.

Timer Recordings

TIMER RECORDINGS

■ Power on TV.

■ Make sure that current time is set correctly.

■ Insert a recordable tape with recording tab.

PROGRAM1 (ONE TIME)

Set proper ÒRECORDING SPEEDÓ.

Select one of SP/SLP with [ ] or [ ] button.

Channel

Start Date

104 Cable

06 / 04

Start Time 10 : 10 AM

End Time 11 : 10 AM

Tape Speed SP

For more information on recording speed, see

ÒUsing video cassetteÓ in the page 24.

■ Prior to the setting, press [VCR] button to change to VCR mode.

Move:

Video:

Input:

SETUP

End:

SETUP

OUTPUT

Press [SETUP] button and select

ÒTIMER RECORDINGSÓ.

Move

and then, select the desired one with [ENTER]

button.

CLOCK SET

TIMER RECORDINGS

CHANNEL SET

FUNCTIONS

PROGRAM1 (ONE TIME)

If a recordable

tape is not

into ÒTIMER RECORDINGSÓ with [

]

Press [SETUP] button to complete the

setting.

ÒProgram # has been saved. For program

recording, insert a cassette....Ó message is

displayed.

Channel

Start Date

104 Cable

06 / 04

LANGUAGE SELECT

inserted in Stop mode

under Power ON,

ÒWaiting for TIMER

RECORDINGS. Insert a

recordable tapeÓ

message is displayed

in the center of

Start Time 10 : 10 AM

End Time 11 : 10 AM

Tape Speed SP

ENTER

Select:

Move:

SETUP

End:

Move:

Video:

Input:

SETUP

End:

TIMER RECORDINGS

OUTPUT

Select ÒMake a New ProgramÓ.

Press [ENTER] button to select ÒMake a new

ProgramÓ.

Make a New Program

Review/Cancel Programs

TIMER RECORDINGS indicator,

the operation display window.

is displayed in

screen, for all

PROGRAM 1 has been saved.

changes or output

conversions incurred

during TIMER

On the reserved time, TIMER RECORDINGS starts

to operate.

For program recording,

insert a cassette.

ENTER

Select:

Move:

SETUP

To leave your cable box

on and tuned to preset

channel.

End:

RECORDINGS SET.

How often do you want

to record program?

Select ÒTimer Recording methodÓ.

Move

and then, select the desired one with [ENTER]

button.

One Time

into desired recording type with [

]

Daily (Sun-Sat)

Weekdays (Mon-Fri)

Weekly (Once a Week)

To Confirm or Cancel TIMER RECORDINGS

ENTER

Select:

Move:

SETUP

For Timer Recording method details, see

ÒVarious TIMER RECÓ in the page 24.

End:

TIMER RECORDINGS

Select ÒReview/Cancel ProgramsÓ.

Make a New Program

Review/Cancel Programs

PROGRAM1 (ONE TIME)

Select Òa broadcasting to recordÓ.

Select the desired broadcasting channel

with [NUMBER] buttons.

Channel

Start Date

0 4 Cable

- - / - -

Start Time - - : - - AM

End Time - - : - - AM

Tape Speed SP

ENTER

Move:

End:

Select:

SETUP

**If Converter Box and video are connected to

Video/Audio terminal, set ÒEXTERNAL INPUTÓ

on TIMER REC CH by using ÒOUTPUTÓ button.

Move:

Video:

Input:

SETUP

PROGRAM 1 (ONE TIME)

OUTPUT

End:

Confirm reservation-recording details in turn

with [ ] button and then, press [CLEAR] button

on the position of the details to delete.

Channel

Start Date

Start Time 10 : 10 AM

End Time 11 : 10 AM

Tape Speed SP

104 Cable

06 / 04

When

] button.

moves into ÒCableÓ, select one of ÒCableÓ/ÓAntennaÓ with [ ] or

[

CLEAR

Cancel:

Move:

SETUP

End:

PROGRAM1 (ONE TIME)

Set Òthe date and time to recordÓ.

Select the date, start time and end time to

record with [NUMBER] buttons.

Channel

Start Date

104 Cable

- - / - -

Timer Program Setting

Start Time - - : - - AM

End Time - - : - - AM

Tape Speed SP

Press [PROGRAM] button in VCR mode.

You can set the Timer Program.

Move:

Video:

Input:

SETUP

End:

OUTPUT

Before timer program setting, clock should be set correctly and video mode should be

selected.

Timer Recordings

Watching and Recording Cable TV

Various TIMER RECORDINGS

To Watch and Record Promptly Cable TV

One Time: It is available of TIMER RECORDINGS at the desired specified time.

Power on converter and then, set a channel to watch or to record.

Power on DVD-video and then, set the channel of DVD-video to the

converter-connected channel (one of CH03/04/EXTERNAL INPUT).

Daily

: Once you set TIMER RECORDINGS of the desired program telecasted at the same time day

after day, it is available of daily recordings. It is available of TIMER RECORDINGS from

Sunday to Saturday.

Weekday : It is similar to Daily TIMER RECORDINGS, but this TIMER RECORDINGS is available from

Power on TV and then, set the video-connected channel (one of

CH03/04/VCR).

Monday to Friday.

Weekly : Once you select one day of the week, it is available of TIMER RECORDINGS in the same

day weekly.

Simultaneous Recording and Watching

At this time, CH selected by the converter is displayed on TV screen.

Using video cassettes

Before you play or record on a video cassette tape, be certain to read this information on the proper care and

Simultaneously, press [REC] button of DVD-Video to record the CH selected by

the converter, and press [REC] button more than two times to set on One Touch

timer Recording (OTR).

use of video cassettes.

Only use video cassettes that bear the VHS mark:

There are four types of video cassettes: T-60, T-90, T-120, and T-160. The amount you can record on a tape is

dependent upon the tape speed at which you record. The table below lists the recording time(hours:minutes) for

each tape type according to recording speed.

Tape Type

T-60

SP Mode (Standard Play) SLP Mode (Extended Play)

TIMER RECORDINGS of Cable TV

1:00

1:30

2:00

2:40

3:00

4:30

6:00

8:00

T-90

Reserve VCR.

T-120

T-160

According to TIMER REC procedures, select TIMER RECORDINGS SET window and

complete the settings. At this time, the video channel should be input in CH3

(or CH4, EXTERNAL INPUT) of the converter-connected channel. Enter date and

time of the cable program for TIMER RECORDINGS.

Protecting video cassettes from accidental erasure

Cassettes have a safety tab to prevent erasure. Break off the safety tab with a screw driver. If

you wish to record on a cassette without a safety tab, cover the hole with cellophane tape.

Adjust Converter.

Set converter to the cable TV channel to record.

Inserting video cassettes

Firmly insert the cassette into the cassette compartment with the label up. An inverted cassette cannot be

inserted.

e.g.) To record CH48,

Display CH48 with CONVERTER CHANNEL SELECT button.

If there is TIMER REC function of converter, it is available of reservation.

Removing video cassettes

Press [EJECT] on the front panel and the VCR will eject the tape. Pull the cassette out gently.

Complete Reservation.

If you power on converter, video powers on automatically and starts recording

at the reserved time.

Audio-visual material may include works of copyright which must not be recorded without authorization of the

If you insert a video cassette without a safety tab into the unit : After setting the timer recording program, Ò

will blink on the display panel in the power off mode and the unit will automatically eject the cassette. In the

power on mode, the unit will playback automatically.

**Home watching cable TV is unavailable of simultaneous recording function

(while recording NBC program, watching CNN program). (Owing to mechanical

features of converter, it is unavailable of simultaneous reception of two

channels.)

If you insert a video cassette with a safety tab into the unit : After setting the timer recording program,the unit

will be stand-by mode in power off mode.

Do not attempt to pull out the video cassette once the unit begins to load the video cassette.

Do not insert fingers or any foreign object beyond the door flaps of the cassette compartment; this could lead to

injury or equipment damage.

Do not attempt to insert a video cassette if the unit in unplugged.

Using advanced features

Play the tape automatically

Searching a cassette tape for programs (indexing)

■ When you record a programs, the VCR places an index mark at the start of the recording. To search for an

■ This feature allows the VCR to automatically start playing when you insert a tape with the safety tab

index mark:

removed.

SETUP

Press [SETUP] button and select

CLOCK SET

FUNCTIONS

¥ If two

recordings

Press [SETUP] button and select

Auto Play:

ÒFUNCTIONSÓ.

TIMER RECORDINGS

CHANNEL SET

Auto TV/VCR:

Index Search

Go-To Search

ÒFUNCTIONSÓ.

overlap, the index

mark for the second

program will be

erased. Therefore,

when you use the

index feature to find

the second program,

the VCR will skip

over it.

FUNCTIONS

LANGUAGE SELECT

Move

into ÒFUNCTIONSÓ with [ ] and

Select ÒIndex SearchÓ.

then, select the desired one with [ENTER]

button.

ENTER

Select:

Move:

SETUP

End:

INDEX SEARCH

If you want to search through a certain number

of index marks, press two number buttons to

enter the number of marks you want to search.

Press CLEAR on the remote to correct an entry.

Press REW or FF

to begin searching

Enter a specific

index number

- -

FUNCTIONS

Press [ENTER] to switch between ON

and OFF.

- Select ON if you want a tape with its safety

tab removed to start playing automatically

when the tape is inserted.

Auto Play:

Auto TV/VCR:

Index Search

Go-To Search

¥ If you record

multiple programs in

one recording

session, the VCR will

only find the index

mark that was

placed on the video

cassette tape when

the recording

SETUP

End:

Press REW to search backward or FF to search

forward. The VCR will locate your index mark

and begin playback. If you did not enter a

specific index number, the VCR will locate the

next index mark and begin playback. Press

STOP to stop index searching.

ENTER

Select:

Move:

SETUP

End:

- Select OFF if you do not want a tape with

its safety tab removed to start playing

automatically.

session began.

Searching with the tape counter (go- to search)

Switch the VCR to TV or VCR mode automatically

■ This feature controls whether the TV/VCR switch changes automatically to the VCR mode when the VCR is turned on.

■ You can mark a segment of the video cassette with the tape counter that will help you easily locate the

segment later.

FUNCTIONS

Some index

marks that may

be missed by the VCR :

Press [SETUP] button and select ÒFUNCTIONSÓ.

Press [SETUP] button and select

Auto Play:

Auto TV/VCR:

Index Search

Go-To Search

ÒFUNCTIONSÓ.

Move

into ÒFUNCTIONSÓ with [ ] and then, select the desired one with

[ENTER] button.

¥ A mark too close to

your location on the

tape.

Select ÒGo-To SearchÓ.

FUNCTIONS

Auto Play:

Auto TV/VCR:

Index Search

Go-To Search

Press [ENTER] to switch between ON

and OFF.

¥ The mark at the

beginning of a

recorded segment of

five minutes or less.

GO-TO SEARCH

The tape counter is displayed on the screen.

Input the tape counter you want to go and press

REW or FF, the VCR will search for the time

counter you want.

Current tape counter is

Select ON if you want the VCR to switch to

the VCR mode when the VCR is turned on

or a cassette is inserted. This only applies if

you connect the ANT.IN and RF OUT jacks

of your VCR and TV and watch your VCR on

channel 3 of your TV.

2 : 17 : 18

ENTER

Select:

Move:

SETUP

¥ The first index mark

on the tape when

you start at the

beginning of the

tape.

Press REW or FF

to go to - : - - : 00

End:

Select OFF if you want the VCR to remain

in the TV mode. This is useful if you watch

your VCR on the TVÕs video input and you

donÕt want your antenna/cable signal

interrupted by the VCR.

Marking a tape for zero search

Use PLAY, REW,or FF to reach the point on the tape that you would like to mark as

0:00:00.

Press [DISPLAY] button to display the tape counter on the screen.

Press [CLEAR] button to reset the tape counter to 0:00:00.

You can continue to play the tape or perform other functions with the VCR.

Using advanced features

Hi-Fi Stereo Playback (Hi-Fi Model only)

Display (O.S.D)

Playing a tape in Hi-Fi high-quality

ÒHi-FiÓ signal lights up in the top of a screen.

Press [DISPLAY] button to display the tape counter, clock and status mode on the

TV screen.

Pressing [AUDIO] button changes menus one by one.

Hi-Fi

LINEAR

MIX

And, by one more pressing [DISPLAY] button before disappearing the OSD from the

screen, only the tape counter will remain on the screen.

If there are some noises made in recording, please ÒLinearÓ to reduce them.

Daylight-Saving Time

Forced Mono

Press [SETUP] button and select ÒCLOCK SETÓ.

Move

into ÒAuto DSTÓ with [ ] .

In some cases, while receiving a stereo or SAP (Secondary Audio Programs), receiving condition may be poor,

which may cause the stereo or SAP broadcasting to be interfered frequently or its volume to be

uncontrollable. Just pressing [AUDIO] in stereo or SAP forces to fix the condition into mono sound.

CLOCK SET

Press [ENTER] to switch between ON

and OFF.

- Select ON if you want the VCRÕs clock to

automatically adjust for daylight-saving

time.

Time and Date Set

Auto DST : ON

To return it, you have two choices, pressing [AUDIO] button again or picking up the channel again.

While recording in stereo signal, it is recorded in Hi-Fi.

SAP is available only in its service areas from stations.

ENTER

Select:

Move:

SETUP

End:

- Select OFF if you do not want the VCRÕs

clock to adjust for daylight-saving time.

Recording Stereo or Secondary Audio Programs (SAP)

SPRING Forward ; Fall Backward

Programs are broadcast in mono or stereo audio, or with a SAP.

Pressing [AUDIO] button changes STEREO, MONO, SAP one by one.

In the Spring, daylight-saving time begins on the first Sunday in April. Because the clock

automatically changes from 2:00 AM to 3:00 AM (forward one hour), remember to include the

extra hour for timer recording falling within this time frame.

STEREO

MONO

SAP

In the Autumn, daylight-saving time ends on the last Sunday in October.

The VCR clock automatically changes from 2:00 AM to 1:00 AM (back one hour). Therefore, it can

affect your recording length.

The following guidelines will help you decide on the best method for recording programs. Choose:

- Stereo reception for normal recording and to record broadcast stereo television.

- Mono reception if the stereo signal is weak and sound is too Ònoisy.Ó

Changing the on-screen menu language

- SAP reception to record a second audio program. An example of a SAP is a program that is broadcast in English, but

has a Spanish SAP.

■ You may select the language in which you would like the VCRÕs menu to be displayed: English, Spanish, or

French.

You can only record stereo and SAPs if the program is a broadcast in stereo or with a SAP. Consult a television guide

for program broadcast information.

SETUP

Press [SETUP] button and select

CLOCK SET

TIMER RECORDINGS

CHANNEL SET

FUNCTIONS

LANGUAGE SELECT

ÒLANGUAGE SELECTÓ.

ENTER

Move:

SETUP

Select:

End:

LANGUAGE SELECT

Select the language among English,

Spanish or French by pressing [ENTER]

button.

Select a language.

English

Spanish

French

ENTER

Select:

Move:

SETUP

End:

Playing a desired scene

Repeating a defined period

To skip scenes in a disc

DVD, VCD, VCD2.0, CD, MP3

DVD, VCD, CD, MP3

To move to next chapter (or track), press [NEXT √√❚] button.

The current chapter (or track) moves to the next chapter (or track).

Each time you press [REPEAT] button in playback mode, repeat

playback starts as below.

¥ DVD : Rep. Chapter --> Rep. Title --> Rep. Off

Press [❚œœ PREV] button.

¥ VCD : Rep. One --> Rep. Disc --> Rep. Off

The current scene moves to the previous chapter (or track) or first scene of current

chapter (or track).

¥ CD : Rep. One --> Rep. Disc --> Rep. Random --> Rep. Off

Directly moving to a desired title (DVD)

¥ MP3 : Rep. One --> Rep. Dir --> Rep. Disc --> Rep. Random --> Rep. Off

DVD

■ Some movie discs may contain multiple titles. If the disc has a movie title menu recorded on it, the [TITLE]

button can be used to select the movie title. Details of operation may differ depending on the disc used.

¥ Rep. Chapter : Current chapter will be repeatedly playback.

¥ Rep. Title : Current title will be repeatedly playback.

¥ Rep. One : Current track will be repeatedly playback.

¥ Rep. Disc : Current disc will be repeatedly playback.

¥ Rep. Random : Tracks in the disc will be playback in random order.

¥ Rep. Dir : Current directory in MP3 disc will be repeatedly playback.

¥ Rep. Off : Repeat playback will be cancelled.

* Selecting a title may not be available on certain DVD discs.

Press the [TITLE/PBC] or [MENU]

button.

A list of the titles on the disc is displayed.

For the case of VCD disc, menu screen will appear

only when the disc has PBC function and PBC ON

is activated.

Press the [ENTER] button or [PLAY]

button after pressing the [

button to select the

desired title.

]

Repeating a defined period from A to B

■ You may repeat a defined period from A to B.

DVD, VCD, CD

The selected title now

starts playing.

At the point where you want to start

the repeat playback, press [A-B]

button.

The right figure appears and repeat playback start

position (A) is set.

Rep. A-

Playing a programmed order

DVD, VCD, CD

At the point where you want to end

the repeat playback, press [A-B]

button again.

The repeat playback end position (B) is set and a

defined period from A to B is playback repeatedly.

Rep. A-B

A MP3 disc may

not be repeated from

A to B.

Program Menu

Title Chapter

Select : ENTER

Title Chapter

While STOP or Playback, press

[PROGRAM] button.

While the right figure is appearing, please input

desired Title and Chapter number with NUMBER

buttons. Press [ENTER] to go into next program

number.

- -

10 - -

- -

Play

Exit : SETUP

To exit from repeat playback mode,

press [A-B] button.

It enters into Normal Playback mode.

Rep. Off

* In case of VCD and CD, please input TRACK Number.

After completing setting, press [PLAY] button.

Then, titles and chapters (track) are played in the above-programmed order.

To exit from Program Play mode, press the [SETUP] button in Program menu

screen.

Playing a desired scene

Confirming the current PLAY mode on screen

Searching DVD with a title number, a chapter number or a time

Confirming the current DVD disc mode

DVD

If you want to search with a title

number, press [SEARCH] button one

time.

It shows total title numbers, chapter numbers and

times. Please enter the new title number to be

searched using the [NUMBER] buttons.

02:00:18

While in playing, press [DISPLAY]

button.

It shows the disc type, current title, current

chapter and time elapsed.

02:00:18

Title - - -

Press [DISPLAY] button again.

It shows the DVD disc logo, subtitle selected,

audio selected, dolby digital logo, repeat playback

mode and current angle.

If you want to search with a chapter

number, press [SEARCH] button

twice.

Please enter the new chapter number to be

searched using the [NUMBER] buttons.

02:00:18

Chapter - - -

To exit from Display mode, press [DISPLAY] button again.

Confirming the current VCD, CD disc mode

VCD, CD

If you want to search with a time,

press [SEARCH] button three times.

Please enter the new time to be searched using

the [NUMBER] buttons.

02:00:18

VCD

While in playing, press [DISPLAY] button.

^LRPBC

OFF

00:45

Time - - : - - : - -

It shows the disc logo, current track, subtitle selected,

audio selected, repeat playback mode, time elapsed and

equalizer bar.

In completing entering, please press [ENTER] button.

PLAY starts from the selected position.

* In case of CD, display screen appears automatically in playback

mode. But subtitle and equalizer bar indicator will not appear.

To exit from Display mode, press [DISPLAY] button

again.

Searching VCD and CD with a track number or time

VCD, CD

Confirming the current MP3 disc mode

MP3

VCD

^LRPBC

OFF

00:45

If you want to search with a time,

press [SEARCH] button one time.

In case of PBC OFF, the screen like the right figure

appears. Please enter the new time to be

searched using the [NUMBER] button.

Time - - : - -

1/517 ¹²⁸K

OFF

00:45/30:35

Display screen appears automatically

in Playback mode.

It shows the MP3 File information in disc, the

DIR_1

DIR_2

DIR_3

DIR_4

DIR_5

directory, MP3 File name and directory list.

* If it is PBC ON, pressing the time number converts PBC to OFF mode automatically.

With [

] buttons, you can move the

cursor to directory or number of MP3 Music

File. To go to desired directory or to playback

MP3 File, press [ENTER] key.

If you want to search with a track

time, press [SEARCH] button twice.

VCD

OFF

00:45

^LRPBC

Track Time - - : - -

In case of PBC OFF, the screen like the right figure

appears. It shows current trackÕs time and the

whole discÕs hours. Please enter the new track

time to be searched using the [NUMBER] button.

* The information of MP3 File means the disc type,

current track, Bit rate, repeat playback mode, time

elapsed and equalizer bar.

At the desired directory position,

press [ENTER] button.

It shows the track list.

1/517 ¹²⁸K

OFF

00:45/30:35

* If it is PBC OFF, only the trackÕs time appears.

\ - - - - - - - - - - - - - - 1.MP3

\ - - - - -

In completing entering, please press [ENTER].

PLAY starts from the selected position.

...

TRACK_1

TRACK_2

TRACK_3

TRACK_4

* In case of MP3, press [SEARCH] button one time. When it shows track ^---, please enter the

track number.

AUDIO language, SUBTITLE language and 3D AUDIO

ZOOM, Multi Angle and Digest play

Selecting an audio language

■ The user may select an audio language and subtitle language if a disc includes Multi-language.

Using a zoom function

DVD

DVD, VCD

■ The user can enlarge the current screen about 1.3 or 2 times.

Keep pressing [AUDIO] button till the userÕs

ENG/3

ENG /3

OFF

1/1

Keep pressing [ZOOM] button till the

preferred zoom appears.

Every time the user presses [ZOOM] button, a zoom

magnification changes 1.3 times (X1.3) ➝ 2 times (X2) ➝

OFF ➝ 1.3 times (X1.3) ➝ ... one by one.

preferred language appears.

A certain disc

may not support audio

select or subtitle

select.

If DVD disc includes audio information, every time the

user presses [AUDIO] button, English (ENG), French (FRE),

Spanish (SPA) and others appear one by one.

For the case of

VCD, only 2 times

Zoom is available.

1.3

A base point to be enlarged is centre and the point can be

changed with the operation of [

] button.

Selecting a subtitle language

DVD

Keep pressing [SUBTITLE] button till the

userÕs preferred language appears.

ENG/3

OFF

1/1

ENG /3

If a DVD disc includes subtitle information, every time

the user presses [SUBTITLE] button, English (ENG),

French (FRE), Spanish (SPA) and others appear one by

one.

Different Angle

DVD

■ If a disc includes multi angle information, the user can watch a screen in multi angles. The function is limited

to a DVD disc supporting multi angle information.

Selecting 3D Audio

DVD, VCD, CD

Keep pressing [ANGLE] button till the

preferred angle appears.

Every time the user presses [ANGLE] button, an angle

degrees changes in a consecutive order.

■ Sound Fields and Graphics Equalizer can be set.

ENG /3

ENG/3

OFF

1/2

Please press [3D] button.

If the right figure appears, move the cursor with

Sound fields

Standard

[

] buttons.

Graphics equalizer

Standard

+8dB

The user may select a ÒSound fieldsÓ among Standard,

Theater, Amphitheater, Live, Concert, Church, Wide, Hall

or Stadium.

- 8dB

Also, select a ÒGraphics equalizerÓ among Standard,

Classic, Rock, Jazz, Pop or User.

Digest play

DVD, VCD2.0

Press the [DIGEST] button in playback or

stop mode.

All the contents of VCD are divided to 9 parts and the

first scene of each parts are shown on the screen.

* When setting graphics equalizer, sound fields changes to

ÒStandardÓ automatically.

Only activates

with VCD 1.0 or VCD

2.0 discs.

Press the [ENTER] button after moving to the desired

scene with [

] button.

The selected scene now starts playing.

About MP3 discs

Displaying menus in a disc

Playing a disc containing MP3 files

To display menus in a disc

MP3

DVD, VCD2.0

This unit will play MP3 files recorded on CD-R and CD-RW discs.

■ If a disc includes menus, the user may use them.

Turn on your television and select the channel assigned to this DVD player.

Press [TITLE/PBC] or [MENU] button.

It shows menus in the disc. Also they are different according to discs.

Press the DVD open [OPEN/CLOSE] button, the disc tray opens.

Put a disc containing MP3 files on the disc tray with the label side up.

Press the DVD open [OPEN/CLOSE] button, the disc tray closes.

(ÒReturnÓ will appear on the OSD with VCD2.0.)

If it is a VCD2.0, select PBC ON mode by pressing [TITLE/PBC] button.

* CD and VCD1.1 do not support the function.

The unit will take a short while to load the disc and display the directory structure.

Press the [ ] navigation buttons of the remote control to select the

folder, then press the [ENTER] button to confirm.

Move a cursor to a relative item with arrow buttons of [

button and select one with [ENTER] button or [PLAY] button.

]

Press the [

] navigation buttons of the remote control to select the file

you want to listen to, then press the [ENTER] button and this selected file is

located and played back.

After starting playback, the track list is on-screen. You can move the highlight onto

the folder name above the track list and change folder with the [PREV] button.

Press the [SEARCH] button twice in stop mode to get back to folder tree view.

LANGUAGE Setup

■ A user can set OSD language, Audio, Subtitle and Disc Menu.

While STOP or RESUME STOP, press

Language

Video

Audio

Others

■ Play and Pause

[SETUP] button.

OSD Language

Audio

Subtitle

English

Press the [PLAY/PAUSE] button to switch between play and pause.

■ Search for a track

Disc Menu

Selecting a OSD language.

Please select a language to be displayed on DVD

screen.

The [SEARCH] button works on MP3 discs as well as CD audio.

ÒOSDÓ means

ÒOn Screen DisplayÓ.

■ To stop playback

Press the [STOP ] button.

■ To skip to the next or previous file

Selecting Audio language.

¥ Press the [NEXT √√❚] button of the remote control briefly while playing, to skip

ahead to the beginning of the next file. Each time you press the button

consecutively, the beginning of the next file is located and played back.

Set it as the preferred audio language. In case the audio language is set and

recorded in the DISC, it is automatically played in the set language in every

playing. For example, English is set and recorded as audio language in the DISC,

it is played in English.

¥ Press the [❚œœ PREV] button of the remote control briefly while playing, to skip

back to the beginning of the previous file. Each time you press the button

consecutively, the beginning of the previous file is located and played back.

Selecting Subtitle language.

Please set it as the preferred language. In case the subtitle language is set and

recorded in the DISC, it is automatically played in the set language in every

playing. For example, English is set and recorded as subtitle language in the

DISC, it is played in English.

The ability of this unit to read MP3 discs is dependent on the followings:

The Bit Rate must be within 64-256 kbps.

The maximum number of directories should not exceed 32.

The maximum depth level of directories should not exceed 4.

File names should be named using 8 or fewer letters and/or numbers, and must incorporate

In case a disc

does not include

setting languages

information, the

selected language

does not appear.

Selecting DISC MENU language.

the ÒMP3Ó file extension. EXAMPLE:

. MP3 where each is a letter or number.

Please set it as the preferred DISC MENU language. In case the DISC MENU

language is set and recorded in the DISC, it is automatically played in the set

language in every playing. For example, English is set and recorded as a DISC

MENU language in the DISC, it is played in English.

********

Use only letters and/ or numbers in file names. If you use special characters, the file and/ or

folder names may not be displayed correctly on the on-screen display.

The CD-R or CD-RW discs should be written using the Ôdisc at onceÕ method.

The disc which is made with ISO 9660 format can be playback.

VIDEO Setup

Others Setup

■ A user can set up a connected TV condition and screen.

While STOP or RESUME STOP, press

Language

OSD

Screensaver

Defaults

Parental

Change Password ◆◆◆◆

Video

Reset

Off

Audio

Others

[SETUP] button.

While STOP or RESUME STOP, press

Language

Video

Audio

Others

[SETUP] button.

TV Aspect

Video Out

4:3 LB

S-Video

Select character display window.

Select "On" to make OSD(On Screen Display)

language displayed in screen.

Select TV Aspect.

If a user selects Ò4:3 PSÓ, the user can watch

only a center of the original scene of Ò16:9Ó.

If a user selects Ò4:3 LBÓ, the user can watch the original scene of Ò16:9Ó, but

the top and bottom of the screen look black color.

Select screensaver.

If a disc size is originally recorded in 4:3, a user cannot watch it in a wide

screen though a user sets a size as Ò16:9 WideÓ.

If bright scenes continue to be displayed in screen, TV can be damaged. Set the

screensaver to "On", the screensaver functions automatically and DVD logo moves

continuously if the resume stop, stop, open status is maintained for about 5 minutes.

Select Video Out.

A user may select a Video Out between Component and S-Video.

Select defaults.

If you select defaults, every function set returns to FACTORY Defaults except

PARENTAL.

Entering a password.

Input password display appears.

AUDIO Setup

Language

OSD

Screensaver

Defaults

Input Password ◆◆◆◆

Change Password ◆◆◆◆

Video

Audio

Others

ÒParental LockÓ

activates only if

you set a password

and the unit goes

into Lock status.

Enter a userÕs password by pressing 4 [Digit]

buttons.

Reset

■ A user may select audio menu according to a userÕs speaker set.

While STOP or Resume STOP, press

Language

Video

Audio

Others

When the disc has no

parental function

even if the disc for

adult only, Parental

Lock doesnÕt activate.

[SETUP] button.

Digital Output Bitstream

Dynamic Off

Select Parental.

Language

Video

Audio

Others

OSD

Screensaver

Defaults

Parental

Change Password ◆◆◆◆

✔Off

Press [ENTER] button to set the

selected item .

It consists of 8 levels of parental control, violence,

sexual scene, strong sexual scene and others to

protect children from watching those scenes.

Select a digital output.

1 Kids

2 G

R₃e_Pse_Gt

You can set following 2 values of digital output;

OFF

4 PG-13

Bitstream: The same signal as audio signal

recorded in disc goes to digital audio

output terminal.

5 PG-R

LPCM: Decoded audio signal goes to digital

The initial

password is

3308. In case you

forget newly-input

password, you can use

3308 as a password.

output terminal.

Changing a password.

For the change of a userÕs password, please move

to ÒChange PasswordÓ and enter new password.

Language

Video

Audio

Others

OSD

Screensaver

Defaults

Parental

Change Password ◆◆◆◆

Reset

8 Adult

Select a Dynamic Range

You can set following 2 values of Dynamic Range;

Off : You can hear the same sound as recorded in disc.

Full : You can hear loud sound softer and soft sound louder.

About DVD

Playable Disc

CHAPTER

It means the information recorded in a DVD. A title in a DVD is divided into many tracks, of which

a track is called as a chapter. A certain scene of a screen can be quickly searched with the

chapter number.

¥ DVD, Video CD (Version 1.1, 2.0), S-VCD and Audio CD

TITLE

It means the information recorded in a DVD. A DVD can be divided into may titles.

Disc type

DVD

Playable

Possible

Impossible

Restriction

TRACK

It means the information recorded in a video CD and audio CD. A disc consists of many a track, for

which a user can search a certain position.

Region number 1 or Region number All

Version 1.0/1.1/2.0, SVCD/CVD

PCM

Video CD

dts

Digital Theatre System is a 5.1 -channel surround sound system, which is widely used in movie

theatres around the world. It enables the bit rate to be increased to provide good sound quality.

ÒDTSÓ and ÒDTS Digital OutÓ are trademarks of Digital Theater Systems, Inc.

CD-G

Only Audio playback

MP3 File

CD-ROM

CD-R

Multi Angle Some DVD discs contain the various scenes that have been simultaneously shot from a number of

Video-CD/CD/CD-ROM (MP3 File)

DVD Video

different angles.

CD-RW

DVD-R

PCM

Linear PCM is a signal-recording format used in a CD, while CD is recorded in 44.1kHz/16bit, a DVD

is recorded in 48KHz/16bit up to 96KHz/24bit.

DVD-RW

DVD+RW

DVD-ROM

DVD-RAM

Photo CD

DVD Video

Dolby Digital Dolby Digital enables the delivery of mono through 5.1-channel audio at data rates from 32 kbps

to 640 kbps, thus offering flexibility and economical performance as well as uncompromised sound

quality.

DVD Video

Bitstream

Lt/Rt

Digital audio data that is decoded into an analog signal for subsequent output to speakers.

It indicates L/R of Dolby Digital 2CH Downmix output.

Downmix

DOWNMIX is reproducing the proper audio when audio format recorded on a disc differs from the

output audio channel configuration. For example, with just one stereo speaker system you can

hear full 5.1 channel audio.

REGION MANAGEMENT INFORMATION

This unit is designed and manufactured to respond to the Region Management information that is

recorded on a DVD disc. The region number of this player is Ò1Ó. If the region number described on the

DVD discs does not correspond to the Region number of this player, the player will not play this disc.

This player will play DVD discs made for ÒALLÓ regions. Therefore, this player will play DVD discs

marked with labels containing the region number Ò1Ó or ÒALLÓ.

S-VIDEO

The S-VIDEO output separates the color (C) and luminance (Y) signals before transmitting them to

the TV set in order to achieve a sharper picture. So this must be selected from the menu to

enable the S-VIDEO output to function.

COMPONENT It is called color difference signal and is a technology to divide and transmit a color signal (C)

into B-Y (Pb) and R-Y (Pr) color difference signal. This technology supplies clearer and more vivid

picture than composite video type .

ALL

(Region 1)

(Region ALL)

Handling Disc

To keep a disc clean condition, please do not touch a side containing play information.

Do not attach a bit of paper or sticky tape on it.

Terms related with DVD

DVD

A DVD (abbreviation of Digital Versatile Disc or Digital Video Disc) can include 135 minutes of video

information. And for audio, it can hold up to 8 kinds of languages and 32 kinds of subtitle

languages. By using MPEG-2 video compression and digital 3D surround sound, DVD realizes high-

defined screen and quality sound like a movie theater.

Do not expose a disc to a direct sunlight or electric heating systems.

After using it, please keep a disc in a case.

Cleaning Disc

CDDA

MP3

A CDDA (abbreviation of Compact disc digital audio) is a music disc that is currently used.

Audio compression format that enables audio files to be stored and transferred on a computer

with a relatively small file size. It enables you to enjoy CD quality music. (Short for MPEG-1 Layer

Before using it, please rub it from center toward outside with clean clothes.

Do not use any type of solvent such as thinner, benzol (benzene), commercial cleaning

goods or antistatic sprays.

PBC

This is recorded on a Video CD 2.0, Video CD 3.0, SVCD and CVD. The scenes or information to be

viewed (or listened to) can be selected interactively with the TV monitor by looking at the menu

shown on the TV monitor. It stands for PlayBack Control.

Basic information about VCR and Videotape

Before doubting about troubles (DVD)

Symptom

Checks

Terms related with VCR

AFT

Automatic fine tuning, a circuit that automatically adjusts TV reception to optimum condition.

Cable television.

¥ The player does not play.

➤ If a DVD is from overseas, it may not be played. Please check a DVDÕs region

code whether it has the relative region code 1 or All.

➤ Please check whether a DVD is inserted in a right direction.

➤ If it is a CD-ROM for PC or DVD-ROM, it does not work.

CABLE

Index Search A feature of this VCR that automatically records an index each time recording begins. It helps you

locate a particular segment of the tape quickly and easily.

¥ No sound comes through.

➤ Play mode may be ÒSLOWÓ or ÒPAUSEÓ(In abnormal speed play, no

sound comes through)

➤ Did you connect the parts in right way?

➤ Please check the operative condition of TV or amplifier.

➤ From SETUP, please check ÒAUDIOÓ items.

SLP

Super Long Play, an intermediate tape recording speed that combines most of the picture/audio

quality obtainable at the standard recording speed with some of the tape economy of Extended

Play.

OSD

OTR

On-screen display of information pertinent to the features of the VCR.

¥ A disc is playing but screen does not

appear or poor screen appears.

➤ Did you turn on your TV sets?

➤ Did you connect the parts in right way?

➤ The play may be in ÒPAUSEÓ.

➤ A disc may have some contaminants or be damaged.

➤ A disc may be bad one.

One-touch recording, a feature that allows you to record the program youÕre watching by pressing

the REC key. Each press of the key increases the recording time by 30 minutes, up to four hours.

Radio frequency, the composite audio/video signal supplied to a TV receiver (or other video

component) by an antenna or cable system.

¥ Sound is irregular

➤ Please check the connection with Dolby Digital amplifier.

➤ Please check the plugs are connected with one another tightly.

➤ Some contaminants may be remained in connection terminal.

Safety tab

The plastic tab at the back of a video tape cassette which, when removed, prevents accidental

erasure of a recording.

¥ Remote control does not work.

➤ Please check the degree of remote control, distance or any interruption.

➤ Battery may be weak or exhausted.

➤ When you operate DVD, use it by pressing [DVD] button.

➤ Unplug the power plug and plug it again.

Standard play, the recording speed to use when the best picture quality is of prime importance

(and when total recording time is not).

¥ Dolby Digital sound does not work

➤ Dolby Digital sound can be worked in the Dolby Digital amplifier only.

➤ Please check ÒDolby Digital Ó mark on your DVD.

➤ In case of playing it through digital output, while pressing [STOP],

please check whether ÒDIGITAL OUTPUTÓ is ÒBITSTREAMÓ by pressing

[SETUP].

What is dew condensation symptom?

➤ Please check the connection is correct.

If a VCR is moved from a cool place to a warm and damp place or a place facing a direct cool wind from air-

conditioner...and others, temperature varies sharply, which makes dew on head drums of VCR.

¥ [AUDIO] or [SUBTITLE] button does

not work.

➤ If a DVD does not include language information, it does not support

the function.

If dew condensation occurs,

First, turn it on for one or two hours before using it.

¥ [ANGLE] button does not work while a

DVD is playing.

➤ ÒANGLEÓ is supported only in a DVD contains multi angle scenes. Also a

user can confirm the support with the ÒANGLEÓ mark on screen.

Do not use it because it may develop troubles of a VCR or videotape.

¥ ÒMENUÓ does not appear while a DVD

is playing.

➤ Please check the degree of remote control, distance or any

interruption.

➤ Please check a battery in remote control whether it is exhausted or

not.

How to use a head cleaner

In case of a old or contaminated videotape, screen may not be clean from the contamination of VCR heads.

Please remove contaminants using a head-cleaner like below order.

Insert a head-cleaner into VCR.

➤ A DVD may not contain menu information.

¥ Screen shakes or appears only in black

and white. (or Subtitle shakes)

➤ A disc may have some contaminants or be damaged.

➤ If you playback a DVD disc of PAL system whose region code is ÒALLÓ,

the playback screen may shake.

Press [PLAY] for 5 seconds, and then press [FF] for about 10 seconds.

PLAY (5 secs)

FF (10 secs)

¥ The file name of MP3 (CD-R) appears

with strange letters.

➤ The file name of MP3 recognize only the Alphabet (A~Z, a~z), numbers

(0~9) and a special symbol on keyboard (~, !, @, #, $ ....) and 10

letters can be displayed in maximum.

Eject a head-cleaner from VCR.

¥ If the screen is not clean yet, please repeat the above 2 or 3 times more.

¥ A head-cleaner is not for sale. Please ask it for the nearest agent.

➤ The letters except above case will be displayed like Ò----Ó.

¥ Any MP3 (CD-R) file isnÕt displayed.

➤ If the surface of disk is injured, the file display and playback can be

impossible.

¥ In case a user ask the removal of contaminants of us, the user should pay extra charges.

Before doubting about troubles (VCR)

Checks

Before doubting about troubles (VCR)

Symptom

Checks

Symptom

¥ ÒPower OnÓ does not work.

➤ Please check whether a power plug is inserted in an electric outlet.

¥ Recording a TV program is impossible.

➤ Please check whether a channel is fixed on video. If not, you have to

turn it into ÒTVÓ by pressing [OUTPUT] button.

¥ It does not work even in ÒPower OnÓ.

➤ Please check whether a videotape is inserted in.

➤ Try to insert a plug again.

➤ Please check whether the timer recording info is right.

➤ Are RF cables inputted antenna connection terminal correctly?

➤ Does a CH number selected in display section appear?

➤ Please check a tab on a tape whether it is broken or not. (If it was

broken, please scotch-tape it)

¥ A videotape is not inputted in.

➤ Please check whether a power plug is inserted in an electric outlet.

➤ Please check whether a videotape is in.

➤ Please check whether a videotape is inserted in a right direction (a

side of transparent window should be on the upside)

➤ Have you inputted a videotape again just after the tape was ejected?

Please try it again after fully ejecting it.

➤ Check whether the screen is displayed in VCR Only Channel. Press

[OUTPUT] button in this remote controller to adjust in "General

Broadcast" condition.

➤ Is the rounded line (RF cable) connected in "ANT.IN" terminal?

➤ When a videotape forces to be ejected, the tape may not be inputted.

In the case, please pull out an outlet, and then push the tape

smoothly.

¥ Once pressing [REC], a videotape is

ejected automatically.

➤ Please check whether the clock is right.

➤ Does the display on your video show Ò

Please make it out.

(Ready to timer recording)?

¥ On inputting a videotape, the tape is

re-ejected.

➤ ThatÕs why a safe mode to protect a videotape is operated

automatically. Please pull out the tape and input it again.

➤ Please check whether the timer recording info is right.

➤ Please check a tab on a tape whether it is broke or not. (If it was

broken, please scotch-tape it)

¥ A videotape is not ejected.

➤ In case the product is used for a long time, a videotape may not be ejected

for a film inside may be stretched. In the case, please pull out a power plug

for about 10mins and then press [EJECT] button.

¥ Timer recording of Cable TV does not

work.

➤ Was a cable data output code connected correctly?

➤ Were a converter manufacturer setup and output channel right?

➤ Did you enter a password? (Please cancel it.)

¥ A channel on video and a play screen

does not appear.

➤ Please check your antennaÕs connection.

➤ Did you turn off your player? (Please turn it on.)

➤ TV channel should be fixed on video channel (3 or 4).

➤ Please check your antennaÕs signal whether it may be weak. In case of

its weakness, please use a frequency amplifier connected with the

device.

¥ In spite of pressing [CHANNEL], a

channel can not be set.

➤ You may not memorize channels.

➤ Please check your channel setting or press a number button.

➤ Press [TV/VCR] and then let ÒVCRÓ is displayed on the display panel.

¥ While duplicating, screen is not clean

and distorted.

➤ Some tapes or discs distributed in the market for lending is set to

prevent copy in manufacturing. These tapes cannot be duplicated in

a good condition.

¥ Noise (screen noise) appears on

screen.

➤ While in no use of VCR, was it turned on?

➤ While in recording a program, do you watch another channel?

➤ Select TV by pressing [TV/VCR] button on remote control.

¥ remote control does not work.

➤ Battery may be weak or exhausted.

➤ A receiver of remote control may be different with a sender.

¥ Noise appears on screen after

recording.

➤ While in playing a videotape, there may happen some noise or blot in

the part of the beginning of a videotape or resuming ÒPAUSEÓ, which

are not breakdown.

¥ Buttons on remote control do not

work.

➤ In case a videotape is positioned in the beginning, ÒVISS REWÓ and

ÒREWÓ do not work.

➤ In case a videotape is positioned in the end, ÒFFÓ, ÒVISS FFÓ, ÒPLAYÓ

and ÒRECÓ do not work.

➤ Please check whether another button is pressed.

¥ While in playing, noise appears.

➤ Please press [TRACKING] for better screen. Videotape may be poor.

Try to change it to another one.

¥ Sound and screen are irregular.

¥ Sound comes out but screen does not

appear.

¥ Screen is irregular and stripes appears.

¥ "Screen Error" message is displayed in

a screen.

➤ Please use a head-cleaner to clean VCR heads. VCR heads may be

contaminated.

¥ VISS index search does not work.

➤ Are you playing a tape that is not recorded in this recorder? (Try to

record it with the recorder.)

➤ You may start recording it in ÒREC-PAUSEÓ. Please start recording it

from stop condition.

¥ Cable broadcasting can not be

selected.

➤ Please select ÒCABLEÓ not ÒNETWORKÓ from the ÒCHANNEL SETTINGÓ.

¥ While recording and playing, the top

of screen extremely waves.

➤ Since VCR Play signals are not stable like a TV signals, screen may be

unstable or curved while in playing. To fix the problem, please

horizontal adjustment.

¥ A screen is not clear.

➤ In case videotape is the one recorded by other products or old one,

stripe may appear on the screen.

➤ Try to adjust the screen by [TRACKING+/Ð] button.

➤ Try to use a head-cleaner.

¥ A screen at pause is trembling or slow

screen is not clear.

➤ Try to use a head-cleaner.

➤ Try to adjust the screen by [TRACKING+/Ð] button.

Specifications

Power

AC 120V, 60Hz

Consumed electricity

Weight

24W (supplementary 4W)

4.6kg

Dimension (WxHxD)

Operative temperature

Installation condition

Received channels

Signal type

435mm x 93mm x 255mm

+5¡C~35¡C

Horizontal / Relative humidity under 80%

VHF: 2-13 CH / UHF: 14-69 CH / Cable: 1-125

NTSC COLOR

Antenna Input/output

VIDEO input

U/V-mixed: 75½ unbalanced

1.0 Vp-p unbalanced, RCA JACK

-8.8dBm, RCA JACK

AUDIO input

VHF output

3 or 4 CH

VIDEO output (common use of DVD and VCR) VIDEO output terminal, 1.0 Vp-p unbalanced, RCA JACK

VIDEO output (DVD only)

S-VIDEO output (75½ In load Y: 1.0Vp-p, C:0.286Vp-p)

COMPONENT output (75½ In load Y: 1.0Vp-p, Pb:0.7Vp-p, Pr:0.7Vp-p)

AUDIO output (common use of DVD and VCR) Audio output terminal (2 kinds): -8.8dBm(VCR), 2.0Vrms(DVD), RCA JACK

AUDIO output (DVD only)

Analogue AUDIO output (2 CH): 2.0Vrms

Digital audio output (COAXIAL)

Very high dense tapes with VHS marks

DVD, VIDEO-CD, CD (12mm), CD (8mm), MP3, CD-R, CD-RW

SP: 33.35mm/s, SLP: 11.12mm/s

SP: 2hrs, SLP: 6hrs (use of T-120 tape)

12 hrs AM/PM

Playable tape

Playable disc

Tape speed

Playtime

Clock display

Time Recording

VIDEO S/N (VCR)

8 programs a year

Over 45dB(Standard recording)

Over 220 lines (Standard recording)

Over 500 lines (DVD Disc PLAY)

Over 69dB (Hi-Fi), over 40dB (Mono)

90dB

Resolution

VCR

DVD

AUDIO (VCR)

AUDIO (DVD)

AUDIO dynamic range

90dB

DVD Audio output standards

Disc type

VIDEO-CD

Output

DVD

Analogue Audio output

Digital Audio output

48/96KHz sampling

48KHz sampling

44.1KHz sampling

Warranty

DEAM (Daewoo Electronics America) warrants each new electronic product manufactured by it to be free from

defective material and workmanship and agrees to remedy any such defect or to furnish a new part (at the

CompanyÕs option) in exchange for any part of any unit of its manufacture which under normal installation,

use and service disclosed such defect, provided the unit is delivered by the owner to us or to our authorized

distributor from whom purchased or authorized service station intact, for our examination with all

transportation charges prepaid to our factory. To establish and receive warranty service at our factory or

authorized service facilities, proof of purchase/dated sales invoice is required. Written authorization must be

obtained before any merchandise is returned to the factory.

This warranty does not extend to any of our electronic products which have been subjected to misuse,

neglect, accident, incorrect wiring not our own, improper installation, unauthorized modification, or used in

violation of instructions furnished by us, nor units which have been repaired or altered outside of our factory,

nor to cases where the serial number thereof has been removed, defaced or changed.

This warranty is in lieu of all warranties expressed or implied and no representative or person is authorized to

assume for us any other liability in connection with the sale of our electronic products.

Over-the-counter exchange of initially defective units

A unit is described as initially defective when the dealer opens the unit and finds that it is inoperative or a

customer opening a new unit finds that it is initially defective. This unit may be returned to the factory by the

dealer for exchange. Under no circumstances will a customer be permitted to return an initially defective unit

directly to the factory.

Model

Parts

Labor

DV6T834N/DV6T834B/DV6T844N/DV6T844B

/DV6T534N/DV6T534B/DV6T544N/DV6T544B

1 Year

3 months

This instrument is listed by UnderwriterÕs Laboratories, Inc. It is

designed and manufactured to meet rigid U.L. safety standards

against X-radiation, fire, casualty and electrical hazards.

Daewoo Electronics

America Inc.

120 Chubb Ave,

Lyndhurst, NJ 07071 USA

For more information about this or other

Daewoo products, call 1-800-DAEWOO8.

HP Hewlett Packard Hewlett Packard Computer Monitor LD4700 User Manual
Dell ST2310 User Manual
Dell Computer Monitor E1909W User Manual
Cypress CY7C1443AV33 User Manual
Crock Pot Countdownn 4 7 Quart User Manual
Black Box RM 415A User Manual
Black Box Computer Hardware LMC5601C VDSL2 User Manual
Black Box Computer Hardware KVT160A R2 User Manual
Asus Computer Hardware P5B VM User Manual
Areca ARC 1120 User Manual