DG-M32D1P-2A(GB) 2006.5.16 4:39 PM ˘
` A
mac001 1200DPI 100LPI
HELP LINE Num ber ; 0 8 7 0 1 0 0 2 5 2 5
With queries, please quote the page number,
reference number and model number.
HDD/DVD Recorder
HDD/DVD Recorder
DHR-9105P
User Manual
250GB
DG-M32D1P-2A(GB) 2006.5.16 4:39 PM ˘
` 2
mac001 1200DPI 100LPI
Im p o r ta n t Sa fe g u a rd s
Im p o r ta n t Sa fe g u a rd s
IMPORTANT FOR LASER PRODUCTS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
LASER
This Digital Video Disc Player employs
a Laser System. To ensure proper use
of this product please read this
owner’s manual carefully and retain for
future reference. Should the unit
require maintenance, contact an
authorized service location - see
service procedure.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Use of control adjustments or the
performance of procedures other than
those specified may result in
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
‘dangerous voltage‘ within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
hazardous radiation exposure.
To prevent direct exposure to the laser
beam, do not try to open the enclosure.
Visible laser radiation when open and
interlocks defeated.
DO NOT STARE INTO THE BEAM.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and servicing
instructions in the literature accompanying the
appliance.
DANGER Visible laser radiation when open and
interlock failed or defeated.
Avoid direct exposure to beam.
CLASS 1
LASER PRODUCT
WARNING TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION Do not open the top cover. There are
no user serviceable parts inside the
Unit; leave all servicing to qualified
service personnel.
CAUTION
TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
CAUTION
Any changes or modification in
construction of this device which
are not expressly approved by the
party responsible for compliance
could void the user’s authority to
operate the equipment.
2
DG-M32D1P-2A(GB) 2006.5.16 4:39 PM ˘
` 3
mac001 1200DPI 100LPI
Im p o rta n t Sa fe g u a rd s
RUDCTION
This set has been designed and manufactured to
assure personal safety. Improper use can result in
electric shock or fire hazard. The safeguards
incorporated in this unit will protect you if you
observe the following procedures for installation, use
and servicing. This unit is fully transistorized and does
not contain any parts that can be repaired by the user.
and to protect it from overheating. These
openings must not be blocked or covered. These
openings must not be blocked by placing the unit
on a bed, sofa, rug, or other similar surface. This
unit should never be placed near or over a
radiator or heat radiator. This unit should not be
placed in a built-in installation such as a
bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have
been adhered to.
1
2
3
4
5
READ INSTRUCTIONS
All the safety and operating instructions should
be read before the unit is operated.
1 0 POWER SOURCES
RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
This unit should be operated only from the type of
power source indicated on the marking label. If
you are not sure of the type of power supply to
your home, consult your dealer or local power
company. For units intended to operate from
battery power, or other sources, refer to the
operating instructions.
HEED WARNINGS
All warnings on the unit and in the operating
instructions should be adhered to.
FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
1 1 POWER-CORD PROTECTION
Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, mains sockets, and
the point where they exit from the unit.
CLEANING
Unplug this unit from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
1 2 LIGHTNING
6
7
8
ATTACHMENTS
For added protection for this unit during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the
unit due to lightning and power line surges.
Do not use attachments unless recommended by
the unit’s manufacturer as they may cause
hazards.
WATER AND MOISTURE
Do not use this unit near water- for example, near
a bath tub, wash bowl, kitchen sink or laundry
tub, in a wet basement, or near a swimming pool.
1 3 DISC TRAY
Keep your fingers well clear of the disc as it is
closing. It may cause serious personal injury.
ACCESSORIES
Do not place this unit on an unstable cart, stand,
tripod, bracket, or table. The unit may fall,
causing serious injury to a child or adult as well
as serious damage to the unit. Use this unit only
with a cart, stand , tripod, bracket, or table
recommended by the manufacturer.
1 4 OVERLOADING
Do not overload wall outlets of extension cords
as this can result in a risk of fire or electric shock.
1 5 OBJECT AND LIQUID ENTRY
Never push objects of any kind into this unit
through openings as they may touch dangerous
voltage points or ‘short-out’ parts that could
result in a fire or electric shock. Never spill liquid
of any kind on the unit.
8 A A unit and cart combination
PORTABLE CART WARNING
should be moved with care. (symbol provided by RETAC)
Quick stops, excessive force,
and uneven surfaces may
1 6 BURDEN
cause the product and cart
combination to overturn.
Do not place a heavy object on or step on the
product. The object may fall, causing serious
personal injury and serious damage to the
9
VENTILATION
Slots and openings in the case are provided for
ventilation to ensure reliable operation of the unit
3
DG-M32D1P-2A(GB) 2006.5.16 4:39 PM ˘
` 4
mac001 1200DPI 100LPI
Im p o rta n t Sa fe g u a rd s
product.
2 3 HEAT
The product should be situated away from heat
sources such as radiators, heat registers,
stoves, or other products (including amplifiers)
that produce heat.
1 7 DISC
Do not use a cracked, deformed or repaired
disc. These discs are easily broken and may
cause serious personal injury and product
malfunction.
2 4 To prevent battery electrolyte leakage, which
may result in injury and damage to the unit or
other objects, observe the following
precautions;
1 8 SERVICING
Do not attempt to service this unit yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
A. All batteries must be installed with the proper
polarity.
1 9 DAMAGE REQUIRING SERVICE
B. Do not mix new with old or used batteries.
C. Only use batteries of the same type and brand.
Unplug this unit from the wall outlet and refer
servicing to qualified service personnel under
the following conditions.
D. Remove the batteries when they are not to be
used for a long period time.
A. When the power-supply cord or plug is
damaged.
B. If liquid has been spilled, or objects have fallen
into the unit.
E. When the batteries have become discharged,
they must be disposed of in a safe manner
which complies with all applicable laws.
C. If the unit has been exposed to rain or water.
D. If the unit does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions. Improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the unit to its normal operation.
E. If the unit has been dropped or the cabinet has
been damaged.
2 5 WEEE (Wa ste of electrica l a nd electronic
equipm ent)
The meaning of the symbol on
the product, its accessory or
packaging indicates that this
product shall not be treated as
household waste. Please,
dispose of this equipment at
your applicable collection
point for the recycling of
electrical & electronic equipments waste. In the
European Union and Other European countries
which there are separate collection systems for
used electrical and electronic product. By
ensuring the correct disposal of this product,
you will help prevent potential hazards to the
environment and to human health, which could
otherwise be caused by unsuitable waste
handling of this product. The recycling of
materials will help conserve natural resources.
Please do not therefore dispose of your old
electrical and electronic equipment with your
household waste. For more detailed information
about recycling of this product, please contact
your local city office, your household waste
disposal service or the shop where you
purchased the product.
F. When the unit exhibits a distinct change in
performance-this indicates a need for service.
2 0 REPLACEMENT PARTS
When replacement parts are required, have the
service technician verify that the replacements
he uses have the same safety characteristics as
the original parts. Use of replacements
specified by the unit manufacturer can prevent
fire, electric shock, or other hazards.
2 1 SAFETY CHECK
Upon completion of any service or repairs to
this unit, ask the service technician to perform
safety checks recommended by the
manufacturer to determine that the unit is in
safe operating condition.
2 2 WALL OR CEILING MOUNTING
The product should be mounted to a wall or
ceiling only as recommended by the
manufacturer.
4
DG-M32D1P-2A(GB) 2006.5.16 4:39 PM ˘
` 5
mac001 1200DPI 100LPI
Ta b le o f Co n te n ts
Ta b le o f Co n te n ts
RUDCTION
In tro d u ctio n
Re co rd in g
Sa fe ty In stru ctio n s ____________________________1
Im p o rta n t Sa fe g u a rd s _________________________2
Ta b le o f Co n te n ts ______________________________5
O ve rvie w ______________________________________6
Id e n tifica tio n o f Co n tro ls ______________________1 0
Ba sic Re co rd in g ________________________________4 1
Recording to DVD or HDD
41
41
42
42
One Touch Record (OTR)
To Pause the Recording
Playing under recording
Tim e r Re co rd in g _______________________________4 2
Timer Recording using Manual Set
Record Screen
42
Co n n e ctio n s
Timer Recording using VideoPlus
system
Canceling a Timer Recording
Stopping a Timer Recording in
Progress
Timer Recording Troubleshooting
43
44
Co n n e ctin g An te n n a / Ca b le ____________________1 5
Co n n e ctin g a TV _______________________________1 5
Co n n e ctin g a n Am p lifie r/ Re ce ive r _____________1 6
Co n n e ctin g O p tio n a l Eq u ip m e n t ______________1 7
Co n n e ctin g a Dig ita l Ca m co rd e r ______________1 7
44
44
Re co rd in g fro m a n Ex te rn a l In p u t _____________4 5
Du b b in g _______________________________________4 6
Me d ia file s Co p y in g ___________________________4 7
Se tu p
In itia l In sta lla tio n ______________________________1 8
Se tu p m e n u ____________________________________1 9
Ed itin g
Setup Menu Overview
19
19
19
22
23
24
25
26
28
29
31
31
HDD Pla y b a ck a n d Ed itin g ____________________4 9
Menu Navigation
INSTALLATION Settings
RECORDING OPTIONS Settings
LANGUAGE Settings
Playing a HDD title
Deleting a HDD title
Editing a HDD title
Sorting a HDD title
Dubbing a HDD title to DVD disc
49
49
50
52
52
PREFERENCES / Video Settings
PREFERENCES / Audio Settings
PREFERENCES / Parental Controls
PREFERENCES / Auto Settings
PREFERENCES / Hard Disk
System Information
Disc Ma n a g e r __________________________________5 3
Disc Editing in DVD±RW disc
Disc Editing in DVD±R, DVD-RW disc 55
Title Editing
Advanced Disc Editing
53
56
57
Restore Defaults
O n -Scre e n Disp la y O ve rvie w __________________3 2
Re fe re n ce
Pla y b a ck
Tro u b le sh o o tin g _______________________________5 9
Te ch n ica l Sp e cifica tio n s ________________________6 1
DVD Pla y b a ck _________________________________3 4
Pla y in g a Pictu re , Mu sic o r DivX file s _________3 6
Tim e sh iftin g & Sa vin g ________________________3 9
Time shifting in HDD mode
Saving to HDD
39
40
5
DG-M32D1P-2A(GB) 2006.5.16 4:39 PM ˘
` 6
mac001 1200DPI 100LPI
O ve r vie w
O ve r vie w
O ve r vie w
W h ich d iscs y o u ca n u se
The following discs can be used in your HDD/DVD
Recorder:
Tim e Shifting
: Simultaneous video recording and playback
•
Pause and resume the live TV broadcast. Issue
trick mode commands like fast forward, fast
rewind, jump and instant replay
Play a previously recorded program while
another program is being simultaneously
recorded
Pla yba ck a nd recording
DVD+RW (Digital Versatile Disc + ReWritable)
DVD+R (Digital Versatile Disc + Write-Once)
•
DVD-R (DVD-Recordable) / DVD-RW (DVD-
Rewritable): Recording with +VR Format (Dual
media support).
Progra m Recording
These discs can only be played back in other DVD
players or recorders if the recording was made in
‘Video mode‘ and the recording was finalised.
: Recording from TV tuner or analog AV input
•
Full support for VideoPlus technologies - simply
enter the program code number (published in
newspapers or on the internet) to setup timer
recording
Pla yba ck only
DVD Video (Digital Versatile Disc)
Audio CD (Compact Disc Digital Audio)
CD-R (CD recordable) Audio, MP3 and DivX files
CD-RW (CD rewritable) Audio, MP3 and DivX files
VCD, SVCD
•
Manually set up timer recording for a TV
program or a recurring TV program
Persona l video copying by ex terna l input
•
•
Analog and DV camcorder tapes
VCR tapes
High-speed dubbing
Not all recordable CDs may be played by your
player.
•
Select program(s) from HDD and copy them to
DVD
Also copy from DVD to HDD (Available with
+VR Format, JPEG, MP3, DivX)
•
Watch a TV program while high-speed dubbing
is in progress
Ab o u t Sy m b o ls
Sim ple, ea sy video editing
•
Rename programs, Delete programs, Split
programs, Segment programs
Identify and keep the desired video and remove
the parts you do not need.
About the
Sym bol
‘
‘ may appear on the TV screen during operation.
•
This icon means the function explained in this
User's Guide is not available on that specific disc.
DVD Pla yba ck
DVD, DivX, VCD, SVCD, MPEG file video,
MPEG-1 Layer 2, MP3, CD stereo audio, Dolby
Digital& DTS digital audio output.
Re g io n a l co d e
If the region number on your DVD disc does not
correspond to the region number of this player, the
disc cannot be played.
ALL
2
6
DG-M32D1P-2A(GB) 2006.5.16 4:39 PM ˘
` 7
mac001 1200DPI 100LPI
O ve rvie w
RUDCTION
Du a l Me d ia
DVD, DVD+R, DVD+RW ?
Supporting Disc
Recording Form a t
Fina lize
±RW / ±R
Wha t is a DVD?
±Disc + VR format
-RW, -R, +R
DVD (Digital Versatile Disc) is a storage medium
that combines the convenience of the compact disc
with the latest digital video technology. DVD video
uses modern MPEG2 data compression technology
that enables an entire feature film to be stored on a
single five inch disc.
After fina lising other DVD pla yba ck
All discs can playback
Does not need selection
(recording format)
Consum er
Rem a rk :
How good is the resolution of DVD com pa red w ith
VHS?
A DVD Recorder that supports ‘dual media’
recording allows DVD+RW format recording (+VR)
on either DVD-R, DVD-RW, DVD+R or DVD+RW
media. Any editing feature that is available with the
+RW logical format is available on any of the media
types. This system allows the flexibility for the
consumer to use any of the above media formats for
recording in the same system. Since the +VR format
is DVD-Video compatible, the consumer can take
any disk recorded on this platform and should be
capable of playing it back on the majority of DVD
players on the market.
The razor-sharp digital images have more than 500
lines of resolution at 720 pixels per line. This is
more than twice as high as VHS and even better
than laser disc quality. DVD picture quality is easily
comparable to the digital masters produced in
recording studios.
Wha t is a DVD+RW?
DVD+ReWritable uses ‘phase change‘ media, the
same technology on which rewritable CDs are
based. A high-performance laser is used to change
the reflective properties of the recording layer; this
process can be repeated more than a thousand
times.
Wha t is a DVD+R?
Unlike a DVD+RW disc, a DVD+R (write-once DVD)
can only be written to once. If it is not finalised
after a recording, further recordings can be added to
it. Old recordings can be deleted but they can no
longer be overwritten. The deleted recordings
(titles) are marked 'deleted title'.
Disc-re la te d Te rm s
Title (DVD only)
The main film, accompanying feature content, or
music album. Each title is assigned a title reference
number enabling you to locate it easily.
Before a DVD+R can be played in a DVD player, it
must be finalised in the HDD/DVD Recorder. Once
this process is complete, no further recordings can
be added.
Cha pter (DVD only)
Sections of a movie or a musical piece that are
smaller than titles. A title is composed of one or
several chapters. Each chapter is assigned a
number to enable you to easily locate the chapter
you want. Depending on the disc, chapters may not
be labeled.
Wha t ca n I do w ith m y HDD/ DVD Recorder?
Your HDD/DVD Recorder is a machine for recording
and playing back digital video discs with ‘two-way‘
compatibility with the universal DVD video
standard. This means:
Tra ck (Audio CD only)
Sections of a movie or a musical piece on an audio
CD. Each track is assigned a number, enabling you
to easily locate the track you want.
•
existing DVD video discs can be played on the
recorder.
•
recordings made on your HDD/DVD Recorder
can be played on other DVD video players and
DVD-ROM drives.
7
DG-M32D1P-2A(GB) 2006.5.16 4:39 PM ˘
` 8
mac001 1200DPI 100LPI
O ve rvie w
W h a t is DV?
Using DV, also known as i.LINK, you can connect a
DV-equipped camcorder to the HDD/DVD Recorder
using a single DV cable for input and output of
audio, video, data and control signals.
The i.LINK interface is also known as IEEE 1394-
1995.
finalise the disc. Before you start a recording
session, check the amount of recording time
left on the disc.
Recording TV Audio Cha nnels
The HDD/DVD Recorder can record one or two
channel audio. For TV broadcasts, this usually
means mono or stereo, but some programs are
broadcast in bilingual audio channel. You can
record either BIL I, BIL II or both.
‘i.LINK’ and the ‘i.LINK’ logo are trademarks.
• The HDD/DVD Recorder is only compatible with
DV-format (DVC-SD) camcorders. Digital
satellite tuners and Digital VHS video recorders
are not compatible.
• You cannot connect more than one DV
camcorder at a time to the HDD/DVD Recorder.
• It may not always be possible to control the
connected camcorder via the DV IN jack.
• Audio input to the DV IN jack should be 32 or
48kHz (not 44.1kHz).
Restrictions on Video Recording
•
You cannot record copy-protected video using
this HDD/DVD Recorder. Copy-protected video
includes DVD-Video discs and some satellite
broadcasts. If copy-protected material is
encountered during a recording, recording will
pause or stop automatically and an error
message will be displayed on-screen.
• Picture disturbance on the recording may occur
if the source component pauses playback or
plays an unrecorded section of tape, or if the
power fails in the source component, or if the
DV cable becomes disconnected.
•
Video that is ‘copy-once only’ can only be
recorded using DVD+RW discs with CPRM.
Copyright Notice
•
Audio and video recordings you make using the
HDD/DVD Recorder are for your personal use
only. You may not sell, lend, or rent them to
other people.
•
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S.patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision corporation. Reverse engineering
or disassembly is prohibited.
Ab o u t DVD Re co rd in g
Notes on Recording
•
The recording times shown are not exact
because the HDD/DVD Recorder uses variable
bit-rate video compression. This means that the
exact recording time will depend on the
material being recorded.
•
When recording a TV broadcast, if the
reception is poor or the picture contains
interference, the recording times may be
shorter.
•
•
•
Discs recorded at high speeds (equal to or
greater than 2X) may not be recognized.
If you record still pictures or audio only, the
recording time may be longer.
The displayed times for recording and time
remaining may not always add up to the exact
length of the disc.
•
•
The available recording time may decrease if
you heavily edit a disc.
When using a DVD+R disc, you can keep
recording until the disc is full, or until you
8
DG-M32D1P-2A(GB) 2006.5.16 4:39 PM ˘
` 9
mac001 1200DPI 100LPI
O ve rvie w
RUDCTION
Pre ca u tio n s
Ca u tio n
Do not mix old and new batteries. Never mix
different types of batteries (standard, alkaline, etc.).
Ha ndling the Unit
When shipping the unit
The original shipping carton and packing
materials come in handy. For maximum
protection, re-pack the unit as it was originally
packaged at the factory.
N o te s o n Discs
When setting up the unit
Ha ndling Discs
The picture and sound of a nearby TV, VCR, or
radio may be distorted during playback. In this
case, position the unit away from the TV, VCR,
or radio, or turn off the unit after removing the
disc.
Do not touch the
playback side of the
disc. Hold the disc by
the edges so that
fingerprints will not get on the surface. Do not stick
paper or tape on the disc.
To keep the surface clean
Do not use volatile liquids, such as insecticide
spray, near the unit. Do not leave rubber or
plastic products in contact with the unit for a
long period of time. They will leave marks on
the surface.
Storing Discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources
of heat, or leave it in a parked car exposed to direct
sunlight, as there may be a considerable
temperature increase inside the car, which could
distort the disc.
Clea ning the Unit
To clean the cabinet
Use a soft, dry cloth. If the surfaces are
extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do
not use strong solvents such as alcohol,
benzine, or thinners, as these might damage
the surface of the unit.
Clea ning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc
from the centre outward.
Do not use strong solvents such as alcohol, benzine,
thinners, commercially available cleaners, or anti-
To obtain a clear picture
The HDD/DVD Recorder is a high-tech,
precision device. If the optical pick-up lens and
disc drive parts are dirty or worn, the picture
quality will be poor. Regular inspection and
maintenance are recommended after every
1,000 hours of use. (This depends on the
operating environment.) For details, please
contact your nearest dealer.
static spray
intended for
older vinyl
Yes
No
records.
N o te o n HDD
Rem ote Control Opera tion Ra nge
Point the remote control at the remote sensor and
press the buttons.
Distance: Within 23 ft (7 m) of the remote sensor.
•
Do not move the recorder immediately after
switching it off. Wait at least 2minutes after
power-off.
Angle: Within 30° in each direction of the remote
sensor.
•
If the HDD/DVD Recorder is used improperly or
in an unsuitable environment, it is possible that
the HDD will fail.
Power failure may cause data loss on the HDD.
We recommend that you back up your
Rem ote Control Ba ttery Insta lla tion
•
•
Detach the battery cover on
the rear of the remote control,
and insert two AAA batteries.
Make sure the polarities (+ and
-) are aligned correctly.
important data to DVD discs in order to protect
against accidental loss or possible HDD failure.
9
DG-M32D1P-2A(GB) 2006.5.16 4:39 PM ˘
` 10
mac001 1200DPI 100LPI
Id e n tifica tio n o f Co n tro ls
Id e n tifica tio n o f Co n tro ls
Fro n t Pa n e l
$
^
*
!
@
#
%
&
( ) 1
2
3 4
5
!
@
Disc Tra y (DVD deck )
Insert a disc here.
Front Pa nel Displa y
3
DV Input
Connects to the DV output of an external
source (VCR, Camcorder, etc.).
4
5
AVF Input (VIDEO, L-AUDIO-R)
Connects to the audio/video output of an
external source (VCR, Camcorder, etc.).
S-VIDEO Input
Connects to the S-Video output of an external
source (VCR, Camcorder, etc.).
Shows the current status of the HDD/DVD
Recorder.
OPEN/ CLOSE (DVD)
Opens or closes the disc tray.
PLAY/ PAUSE (ENTER)
Starts playback of a disc or HDD. Pauses
playback or recording temporarily.
STOP
Stops playback.
PREV/ REW
Skips to previous chapter. Searches backward.
NEXT/ FF
#
$
•
HDD capacity is displayed in front panel or
Setup-Preferences-Hard Disk.
%
^
&
*
(
Skips to next chapter. Searches forward.
STANDBY/ ON
Turns the HDD/DVD Recorder on and off.
REC
Starts recording. Press repeatedly to set the
recording time.
)
1
2
SELECT DVD/ HDD
Toggles control between the DVD mode and
the HDD mode.
MENU
Accesses media browser or return to previous
menu.
PR+/ – (…/ †)
Scans up or down through memorized channels.
Also moves up and down in menus.
1 0
DG-M32D1P-2A(GB) 2006.5.16 4:39 PM ˘
` 11
mac001 1200DPI 100LPI
Id e n tifica tio n o f Co n tro ls
RUDCTION
Fro n t Pa n e l Disp la y
DVD MODE
HDD MODE
HDD/DVD Recorder is
recording.
Disc is loaded
DVD Timer Recording is set
HDD Timer Recording is set
FRONT DISPLAY MESSAGE:Indicates
clock,channel,current mode,OTR
time,etc.
Cha nnel
Recording on HDD
TV Channel
PR23
Indicates a Timer recording on HDD
is set.
1 1 : 1 5
Indicates a Timer Recording on HDD
is in standby mode.
Input m ode
1 1 : 1 5
1 1 : 1 5
0:30
AV1 input
DV input
Au-1
Indicates the HDD is recording.
OTR Recording mode
DV
Recording on disc
Others
Indicates a DVD Timer recording is
set.
Indicates a DVD Timer Recording is
in standby mode.
Indicates when the HDD/DVD
Recorder is locked. The front panel
is locked by pressing and holding
the [√] button over 5 seconds on
the remote control and is unlocked
by pressing any key on the remote
control.
1 1 : 1 5
1 1 : 1 5
SAFE
1 1 : 1 5
0:30
Indicates the DVD is recording.
OTR Recording mode
Indicates the HDD/DVD Recorder is
in TV mode (set by [TV/DHR]
button).
TV
RECP
Recording Pause mode
Indicates when the HDD/DVD
Recorder is outputting the video
signal in Interlaced Scan mode.
I-S
Indicates when the HDD/DVD
Recorder is outputting the video
signal in Progressive Scan mode.
P-S
NO
No disc or unreadable disc
1 1
DG-M32D1P-2A(GB) 2006.5.16 4:39 PM ˘
` 12
mac001 1200DPI 100LPI
Id e n tifica tio n o f Co n tro ls
Re m o te Co n tro l
- Turns the HDD/DVD Recorder on and off.
- Locks the front panel by pressing and holding it over 5 seconds.
Opens and closes the disc tray.
Selects DVD mode.
Selects HDD mode.
Selects DV Input mode.
HDD
DV
INPUT
Switches the HDD/DVD Recorder input to RF (Tuner), AV1, AV2, AVF or S-
VIDEO.
- Selects numbered options in menus.
- Selects TV channels.
Clears previous setting of timer-recording or file name.
Adds the title in Dubbing or Copying menu.
Accesses media browser (or title menu) or return to previous menu.
Displays or exits the main setup menu.
Displays the edit menu for DVD or HDD.
Displays information about the currently loaded disc, HDD or TV channel.
- œ √…† : Selects menu options.
- PR +/– : Selects channels.
Confirms menu selections.
- Starts playback.
- Pauses playback or recording temporarily. Press again to exit Pause mode.
Skips to the next or previous chapter/track.
Searches backward/forward.
Increases or decreases the slow motion speed when playing a DVD or HDD.
Stops playback or recording.
1 2
DG-M32D1P-2A(GB) 2006.5.16 4:39 PM ˘
` 13
mac001 1200DPI 100LPI
Id e n tifica tio n o f Co n tro ls
RUDCTION
Starts recording. Press repeatedly to set the recording time. For more
details, Refer to One Touch Record (OTR) on page 41.
DUB
Displays the Dubbing or Copy menu.
Selects Recording mode. (Approx.)
[DVD] HQ (1 hr), SP (2 hrs), EP (4 hrs), SLP (6 hrs)
[HDD] HQ (51 hrs), SP (105 hrs), EP (204 hrs), SLP (310 hrs)
Displays the Timer Recording menu and VideoPlus menu.
Selects a subtitle language, if available.
Selects an audio language (DVD), audio channel (CD) or audio type (TV).
Enlarges the video image.
Repeats the current chapter, track, title or the entire disc.
Repeats playback between two points (A and B).
Searches for a specific title or a chapter.
TV/DHR
Switches between the HDD/DVD Recorder tuner and your TV tuner.
Displays a disc’s Title menu, if available.
TITLE/PBC
P.SCAN
Press and hold for 5 seconds to switch between Progressive Scan and
Interlace Scan mode.
Pro g re ssive Sca n Mo d e
•
If your TV supports Progressive Scan, you can view high quality video by setting the
HDD/DVD Recorder to Progressive Scan mode. If your TV does not support
Progressive Scan, do NOT change to Progressive Scan mode.
If you do so accidentally, press and hold the [P.SCAN] button for 5 seconds to
restore normal viewing.
•
•
When video output mode is changed from RGB to Interlace or Progressive (Scart 1)
will not be correct colour for Component video.
As component outputs have their own Jacks on the back side, change the TV input
into Component input, after connecting the component cables from the HDD/DVD
Recorder to the TV.
•
Changing from Interlace or Progressive to RGB, should be the opposite of above.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS
ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO
BE DISPLAYED IN THE PICTURE. IN THE CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATIBILITY 'WITH THIS MODEL 525p
DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTRE.
1 3
DG-M32D1P-2A(GB) 2006.5.16 4:39 PM ˘
` 14
mac001 1200DPI 100LPI
Id e n tifica tio n o f Co n tro ls
Re a r p a n e l
@
%
!
#
$
^
&
*
(
)
!
@
S-VIDEO OUT
Connect to a TV with an S-Video Input.
^
&
AC Pow er Cord
Plug into a power outlet.
AUDIO OUT (L, R)
COAXIAL/ OPTICAL (Digita l Audio Out)
Connect to a TV or other equipment with audio
inputs.
Connect to an amplifier with a coaxial (or
optical) digital audio input.
#
$
COMPONENT VIDEO OUT (Y Pb Pr)
Connect to a TV with Component Video (Y Pb
Pr) inputs.
*
Sca rt sock et 1
Connection of a TV set. Composite-output and
RGB-output
ANT OUT
Connect to a TV with an RF input.
Cooling Fa n
Sca rt sock et 2
(
)
Connection of an additional device (satellite
receiver, set-top box, video recorder,
camcorder, etc.)
Ca u tio n
%
ANT IN
•
Do not touch the inner pins of the jacks on the
rear panel. Electrostatic discharge may cause
permanent damage to the HDD/DVD Recorder.
Connect to your antenna or cable TV outlet.
1 4
DG-M32D1P-2A(GB) 2006.5.16 4:39 PM ˘
` 15
mac001 1200DPI 100LPI
Co n n e ctio n s
Co n n e ctio n s
RUDCTION
If your cable wire is connected to your TV without a
converter or descrambler box, unscrew the wire
from your TV and attach it to the RF IN (FROM ANT.)
jack on the rear panel of the HDD/DVD Recorder.
Use the supplied RF cable to connect between the
HDD/DVD Recorder’s OUT (TO TV) jack and the
antenna input jack on your TV. With this connection,
you can receive all midband, superband, and
hyperband channels (all cable channels).
•
There are a variety of ways to connect the
HDD/DVD Recorder to your TV and other
equipment. Use only one of the connections
described below. Whichever TV connection
you use will work with all input sources.
Please refer to the manuals for your TV, VCR,
stereo system, or other devices as necessary to
make the best connections.
For better sound reproduction, connect the
HDD/DVD Recorder’s AUDIO OUT jacks to the
audio in jacks of your amplifier, receiver,
stereo, or audio/video equipment. See
‘Connecting an Amplifier/Receiver‘ on page 16.
•
•
ETCIONS
Co n n e ctin g a TV
Choose one of the following TV connections,
depending on the capabilities of your equipment.
Ca u tio n
•
•
•
Make sure the HDD/DVD Recorder is
connected directly to the TV, and the TV is set
to the correct video input.
Do not connect the HDD/DVD Recorder’s
AUDIO OUT jack to the phone in jack (record
deck) of your audio system.
Do not connect the HDD/DVD Recorder via
your VCR. The DVD image could be distorted
by the copy protection system.
Rear of TV
S-VIDEO
INPUT
ANTENNA
INPUT
COMPONENT/PROGRESSIVE VIDEO INPUT
Y
Pr
Pb
S
C
V
R
Co n n e ctin g An te n n a / Ca b le
1
Disconnect the antenna/cable from the rear of
your TV.
2
Connect this cable to the jack marked ANT IN
(FROM ANT.) on the rear panel of the HDD/DVD
Recorder.
Rear of HDD/DVD Recorder
RF Connection
Connect the ANT OUT (TO TV) jack on the HDD/DVD
Recorder to the antenna in jack on your TV using the
supplied 75-ohm RF cable (R).
Antenna
Antenna
Cable TV
Wall Jack
Flat Wire
(300ohm)
This set doesn’t have a modulator output. However
it still applies the RF through Output.
300/75ohm Adapter
(Not supplied)
OR
OR
Sca rt Connection
1
Plug a scart cable into the scart socket EURO
AV1 at the back of the HDD/DVD Recorder and
the corresponding scart socket at the back of
the TV set. (V)
2
Plug a scart cable into the blue scart socket
EURO AV2/DECODER at the back of the
HDD/DVD Recorder and the corresponding
scart socket at the back of the Decoder.
Rear of HDD/DVD Recorder
1 5
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 16
mac001 1200DPI 100LPI
Co n n e ctio n s
S-Video Connection
1
2
Connect the HDD/DVD Recorder’s DIGITAL
AUDIO OUT jack (Coaxial or Optical) to the
corresponding in jack on your amplifier. Use an
optional digital coaxial (or optical) audio cable.
(X)
1
Connect the S-VIDEO OUT jack on the
HDD/DVD Recorder to the S-Video in jack on
your TV using an S-Video cable (S).
2
Connect the Left and Right AUDIO OUT jacks
from the HDD/DVD Recorder to the left/right
audio in jacks on your TV using the audio
cables.
You will need to activate the HDD/DVD
Recorder’s digital output; see ‘Audio’ Settings
on page 25.
Digita l Multi-Cha nnel Sound?
Com ponent Video Connection
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
audio/video receiver that supports one or more of
the audio formats provided by your HDD/DVD
Recorder (MPEG 2, Dolby Digital, and DTS). Check
the receiver manual and the logos on the front of
the receiver.
•
If your television is a high-definition or ‘digital
ready‘ television, you may take advantage of
the HDD/DVD Recorder’s Progressive Scan
output for the highest video resolution possible.
•
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled.
•
•
•
•
Due to the DTS Licensing agreement, the
digital output will be in DTS digital out when
the DTS audio stream is selected.
1
2
Connect the COMPONENT VIDEO OUT jacks on
the HDD/DVD Recorder to the corresponding in
jacks on your TV using a Y Pb Pr cable (C) if the
component (Y, Pb, Pr) is available on your TV.
If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound
or no sound at all.
5.1 channel digital surround sound via the
digital connection can only be obtained if your
receiver is equipped with a digital multi-
channel decoder.
Connect the Left and Right AUDIO OUT jacks
from the HDD/DVD Recorder to the left/right
audio in jacks on your TV using the audio
cables.
•
Be sure to set the HDD/DVD Recorder to
Progressive Scan mode by pressing and
holding [P.SCAN] for 5 seconds (or changing
the ‘Video Output’ in the Setup Menu; see
page 24).
To see the audio format of the current DVD on
the on-screen display, press [AUDIO].
•
Progressive Scan does not work with the RF,
Audio/Video or S-Video connections.
The HDD/DVD Recorder does not perform internal
(2- channel) decoding of DTS sound tracks. To enjoy
DTS multi-channel surround, you must connect the
HDD/DVD Recorder to a DTS compatible receiver
via one of the HDD/DVD Recorder’s digital audio
outputs.
Co n n e ctin g a n Am p lifie r/ Re ce ive r
Rear of HDD/DVD Recorder
Connecting to a n a m plifier equipped w ith tw o
cha nnel a na log stereo or Dolby Pro Logic ll/ Pro Logic
Connect the Left and Right AUDIO OUT jacks on the
HDD/DVD Recorder to the left and right audio in
jacks on your amplifier, receiver, or stereo system,
using the supplied audio cables (A).
X
A
Connecting to a n a m plifier equipped w ith tw o
cha nnel digita l stereo (PCM) or to a n Audio/ Video
receiver equipped w ith a m ulti-cha nnel decoder
(Dolby Digita l™, MPEG 2 , or DTS)
OPTICAL
COAXIAL
DIGITAL INPUT
L
R
DIGITAL INPUT
AUDIO INPUT
Amplifier (Receiver)
1 6
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 17
mac001 1200DPI 100LPI
Co n n e ctio n s
Co n n e ctin g O p tio n a l Eq u ip m e n t
Co n n e ctin g a Dig ita l Ca m co rd e r
To receive audio/video signals from other
Using the front panel DV IN jack, it is possible to
connect a DV digital camcorder, video deck or
DVD+R/RW recorder and digitally transfer DV tapes
or DVD+R/RW discs to DVD±R, DVD±RW or HDD in
HDD/DVD Recorder.
equipment, connect the AVF (Audio/Video Front)
jacks on the HDD/DVD Recorder to the audio/video
out jacks on your external component, using
optional audio/video cables.
ETCIONS
Use a DV cable (not supplied) to connect the DV
In/Out jack of your DV camcorder/video deck to the
front panel DV IN jack of the HDD/DVD Recorder.
Jack Panel of Accessory Component
(VCR, Analog Camcorder, etc.)
This jack is for connection to DV equipment only. It
is not compatible with digital satellite tuners or D-
VHS video decks.
DV Digital Camcorder
DV
IN/OUT
Front of HDD/DVD Recorder
D
Front of HDD/DVD Recorder
1 7
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 18
mac001 1200DPI 100LPI
In itia l In sta lla tio n
In itia l In sta lla tio n
After successfully connecting your HDD/DVD
Recorder to your TV and other devices, this chapter
will show you how to complete the initial
installation.
7
8
9
The HDD/DVD Recorder detects channels
automatically and stores them in memory.
After finishing Auto Channel Search, set the
clock.
You must follow the initial installation process to
set the time, date, channels, and language
preferences for the HDD/DVD Recorder.
Use [œ/√] to move left/right and use […/†]
to change the settings.
1
A ‘Welcome‘ message is displayed on the
screen. Make sure the RF cable from your
antenna or cable TV jack is connected. Press
[ENTER] to begin initial installation.
1 0 After setting the clock, press [ENTER] to
confirm. If you cancel the process during Initial
Installation, you should repeat this procedure.
2
3
4
5
Select the desired language for the on-screen
menu using […/†]. Press [ENTER] to confirm.
Re -In sta lla tio n
This set is equipped with the multi-tuner for
receiving many countries' broadcasting. In order to
receive broadcasting of different countries, follow
as below.
Select the desired country using […/†]. Press
[ENTER] to confirm.
1
Press [SETUP] and select the 'Restore
Defaults' using [œ /√]. Then, RESET the set.
(see page 31)
Select the desired disc menu language using
[…/†]. Press [ENTER] to confirm.
Select the desired disc playback audio
language using […/†]. Press [ENTER] to
confirm.
2
3
Power On, then you see the 'Initial
Installation'.
Select the country which you want to (see
step 3), then repeat the steps 4~10.
6
Select the desired disc playback subtitle
language using […/†]. Press [ENTER] to
confirm.
Installation
Installation
Installation
Please select your language to begin auto
install procedure:
Please select your country of use:
UK & Ireland
Welcome.
English
Switzerland
Spanish
French
Danish
Catalan
Belgium
Denmark
Finland
France
Press [Enter] to begin auto channel search.
Ensure aerial is connected.
German
Icelandic
Germany
Greece
Instructions:
Enter-Confirm Setup-Exit Move …†
Instructions:
Enter-Confirm Setup-Exit Move …†
Instructions:
Setup-Exit
Installation
Installation
Set Clock
Please select disc menu language:
Default
E
Please set the clock:
Searching for available TV stations:
Installation
…
Time : 13 : 00
†
S
Please select disc audio language:
F
Default
C
Installation
2 channels found
Please wait...
Date : 02 \ Jan \ 2010 (Sat)
D
Please select disc subtitle language:
G
Default
English
Instructions:
Enter-Confirm Setup-Exit Move …†
I
Instructions:
Setup-Exit
Spanish
French
Czech
Danish
German
1 8
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 19
mac001 1200DPI 100LPI
Se tu p m e n u
Se tu p m e n u
Se tu p Me n u O ve r vie w
4
5
6
Press [ENTER]. The ‘Manual Setup’ menu
appears.
The HDD/DVD Recorder Setup menu includes six
categories, including: Installation, Recording
Options, Languages, Preferences, System Info, and
Restore Defaults. Press [SETUP] and [œ/√] on the
remote control to view the first and second levels of
the Setup menu.
Use […/†] to select ‘Standard‘. Press [ENTER]
to move to the second level.
Use […/†] to select the desired ‘Standard’
(PAL-BG, PAL-II, PAL-DK, or SECAM-L), then
press [ENTER].
Manual Setup
Standard
Me n u N a vig a tio n
PA
Select The
Reception
Auto Search
Fine Tune
A
standard.
1
2
3
Press [SETUP]. The Setup menu appears.
C
PAL-BG
Use [œ/√] to select the desired category.
PAL-II
Decoder
Store Channel
Program Name
P
While the desired category is selected, press
[…/†] to move to the second level.
PAL-DK
STEUP
SECAM-L
Instructions:
Enter-Confirm Setup-Exit Move …†
4
5
Press [ENTER] to move to the third level.
Use […/†] to select the desired setting, then
press [ENTER] to confirm your selection.
This set is equipped with the Multi-Tuner. You can
search broadcasting of other countries. If the set
can not search the channels, please Re-Install. (see
page 18.)
Some items require additional steps. Press
[SETUP] at any time to return to the previous
menu.
7
8
Use […/†] to select ‘Reception‘. Press
[ENTER] to move to the second level.
6
Press [SETUP] to exit the Setup menu.
Use […/†] to select the desired broadcast
system (Aerial or Cable), then press [ENTER].
IN STALLATIO N Se ttin g s
Ma nua l Set
To complete the set-up of your HDD/DVD Recorder
when the auto set has not stored all of the channels
or when you wish to store a new channel.
Aeria l: If you are using a standard antenna to
receive channels.
Ca ble: If you are using basic cable to receive
channels.
Manual Setup
Standard
Reception
Auto Search
Fine Tune
Decoder
PAL-BG
Aerial
1
2
3
Press [SETUP]. The Setup menu appears.
Select The
C
Use [œ/√] to select ‘Installation‘.
Reception.
Aerial
While ‘Installation‘ is selected, press [†] to
select ‘Manual Set‘.
Store Channel
Program Name
P
Cable
P-01
Instructions:
Enter-Confirm Setup-Exit Move …†
Installation
Manual Set
Auto Set
Set Clock
Adjust Channels
Instructions:
Enter-Confirm Setup-Exit
Move …†
1 9
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 20
mac001 1200DPI 100LPI
Se tu p m e n u
9
Use […/†] to select ‘Auto Search‘.
1 4 Use […/†] to select ‘Store Channel‘. Press
[ENTER] to move to the second level.
1 0 Search the real channel number by pressing
[œ/√].
1 5 Use […/†] to select program number to store
and press [ENTER] to confirm.
Manual Setup
Standard
Reception
Manual Setup
Standard
PAL-BG
Aerial
PAL-BG
Aerial
CH-02
Reception
Auto Search
Fine Tune
Auto Search
Fine Tune
Decoder
CH-02
Off
Decoder
Store Channel
Program Name
Off
Store Channel
Program Name
PR-01
P-01
Select Channel
Instructions:
To Store
Instructions:
Enter-Confirm Setup-
Enter-Confirm Setup-Exit Move …†
PR-01
1 1 Select ‘Fine Tune’. You can adjust the fine
tuning.
1 6 Use […/†] to select ‘Program Name‘. Press
[√] to move to the second level. If your
HDD/DVD Recorder is showing no station name
or is showing a station name incorrectly, you
can correct this.
Manual Setup
Standard
Reception
PAL-BG
Aerial
Auto Search
Fine Tune
CH-02
1 7 Either select the name from the stored list or
you create the station name and enter a 4-digit
name. Change the letters with the […/†],
move the next letter with the [œ/√].
Decoder
Off
Store Channel
Program Name
PR-01
P-01
Instructions:
Enter-Confirm Setup-Exit Move …†
Manual Setup
Standard
Reception
PAL-BG
Aerial
1 2 Use […/†] to select ‘Decoder‘. Press [ENTER]
Auto Search
Fine Tune
CH-02
to move to the second level.
Decoder
Store Channel
Program Name
Off
1 3 When the program is encoded (and you have a
decoder connected to socket EURO AV2), press
[…/†] to select ‘On’ and press [ENTER] to
confirm.
R0
Edit Channel
Name
Instructions:
Enter-Confirm Setup-
P
–
0
1
Manual Setup
Standard
Reception
PAL-BG
Aerial
Auto Search
Fine Tune
CH-02
Decoder
Store Channel
Program Name
Of
Select Decoder
State
Off
Instructions:
Enter-Confirm Setup-
On
2 0
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 21
mac001 1200DPI 100LPI
Se tu p m e n u
Auto Set
Set Clock
The HDD/DVD Recorder has a frequency
1
2
Follow steps 1-2 as shown under ‘Manual Set’.
synthesized tuner capable of receiving channels
that include VHF Low E2~S6, VHF High S7~S36, and
UHF S37~E69.
Use […/†] to select ‘Set Clock‘.
Prepa ra tion:
Installation
Manual Set
Auto Set
Connect the HDD/DVD Recorder to the desired type
of antenna or cable TV system, as shown in
‘Connecting Antenna/Cable‘ on page 15.
Set Clock
Adjust Channels
1
2
Follow steps 1-2 as shown under ‘Manual Set’.
While ‘Installation‘ is selected, press […/†] to
select ‘Auto Set‘.
Instructions:
Enter-Confirm Setup-Exit
Move …†
STEUP
Installation
Manual Set
Auto Set
3
Press [ENTER]. The ‘Set Clock’ menu appears.
Set Clock
Adjust Channels
Set Clock
Please set the clock:
…
Time : 13 : 00
†
Instructions:
Enter-Confirm Setup-Exit
Move …†
Date : 02 \ Jan \ 2010 (Sat)
Instructions:
Enter-Confirm Setup-Exit Move …†
3
Press [ENTER] to begin the channel search.
The tuner will automatically search for all
available channels in your area and place them
in the tuner’s memory.
4
5
Enter the date and time.
œ /√ (left/right): Moves the cursor to the
previous or next column.
Installation
…/† (up/down): Changes the setting at the
current cursor position.
Searching for available TV stations:
5 channels found
Please wait...
Press [ENTER] to confirm your setting, then
press [SETUP] to exit the Setup menu.
Instructions:
Setup-Exit
After Auto Set is complete, follow the instructions
above to make sure that Tuning Band is set
correctly.
2 1
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 22
mac001 1200DPI 100LPI
Se tu p m e n u
Adjust Cha nnels
2
3
Press […/†] to select the PR number you want
to move to.
1
2
Follow steps 1-2 as shown under ‘Manual Set’.
Press [ENTER]. The selected PR Will be moved
to the new PR number.
Use […/†] to select ‘Adjust Channels‘.
Delete
After tuning TV stations into your HDD/DVD
Recorder, you may wish to delete a station.
Installation
Manual Set
Auto Set
Set Clock
Adjust Channels
1
Use […/†] to select 'Delete' and press
[ENTER].
Instructions:
Enter-Confirm Setup-Exit
Move …†
RECO RDIN G O PTIO N S Se ttin g s
DVD Record Qua lity
You can set the default DVD recording quality to
(Approx. time) : HQ (High Quality - 1 hr/disc), SP
(Standard Play - 2 hrs/disc), EP (Extended Play - 4
hrs/disc), or SLP (Super Long Play - 6 hrs/disc).
3
Press [ENTER]. The Adjust Channels menu
appears.
Adjust Channels
…
PR-01 - - - -
Select Channel
PR-02 - - - -
Options
1
2
3
Press [SETUP]. The Setup menu appears.
PR-03 - - - -
Edit
PR-04 - - - -
Use [œ/√] to select ‘Recording Options‘.
PR-05 - - - -
Align
PR-06 - - - -
†
Delete
While ‘Recording Options‘ is selected, press
[†] to select ‘DVD Record Quality‘.
Instructions:
Enter-Confirm Setup-Exit Move …†
4
5
Press [ENTER] to move to the second level.
Use […/†] to to select the desired Record
Quality (HQ, SP, EP, or SLP).
4
Use […/†] to select the PR number you want
to adjust. Then press [ENTER].
6
Press [ENTER] to confirm your selection, then
press [SETUP] to exit the menu.
Edit
After tuning TV stations into your HDD/DVD
Recorder, you may wish to put a name into any
channel you want to.
Recording Options
1
2
Use […/†] to select 'Edit' and press [ENTER].
You can put a name by pressing […/†] and
[œ /√].
DVD Record Quality
HDD Record Quality
Auto Chapter
Select Record
Quality
SLP
3
Press [ENTER] to confirm.
EP
Instructions:
Enter-Confirm Setup-Exit
Move …†
Align
SP
HQ
After tuning TV stations into your HDD/DVD
Recorder, you may wish to change the order of PR's
you have in your set, as your preference.
1
Use […/†] to select 'Align' and press [ENTER].
2 2
DG-M32D1P-2A(GB) 2006.5.16 5:28 PM ˘
` 23
mac001 1200DPI 100LPI
Setup menu
LANGUAGE Settings
OSD Language
HDD Record Quality
You can set the default HDD recording quality to
(Approx. time) : HQ (High Quality - 51 hrs), SP
(Standard Play - 105 hrs), EP (Extended Play - 204
hrs), or SLP (Super Long Play - 310 hrs).
Select a language for the HDD/DVD Recorder Setup
menu and on-screen displays.
1
2
3
Press [SETUP]. The Setup menu appears.
Follow the same procedure as the 'DVD Record
Quality'.
Use [œ] and [√] to select ‘Languages‘.
While ‘Languages‘ is selected, press [†] to
select ‘OSD Language‘.
Recording Options
DVD Record Quality
HDD Record Quality
Auto Chapter
SP
4
5
6
Press [ENTER] to move to the second level.
S
Select HDD
Quality
Use […/†] to select the desired language.
SLP
EP
Press [ENTER] to confirm your selection, then
press [SETUP] to exit the menu.
Instructions:
Enter-Confirm Setup-Exit
Move …†
SP
HQ
Languages
Auto Chapter
During recording, chapter markers are added
automatically at fixed intervals. You can set this
interval to 5 minutes, 10 minutes or 15 minutes. To
turn off automatic chapter marking, select ‘Off‘.
Follow the same procedure as the ‘DVD Record
Quality’.
OSD Language
E
Select OSD
Menu Language
Subtitle Language
Audio Language
Language
English
Spanish
Instructions:
Enter-Confirm Setup-Exit
Move …†
French
Czech
Recording Options
DVD Record Quality
HDD Record Quality
Auto Chapter
SP
Menu/Subtitle/Audio Language
Select your preferred language for Disc Menus,
Subtitles, and Audio soundtracks.
Select Auto
Chapter
Off
5min
10min
15min
Follow the same procedure as the OSD Language.
Instructions:
Enter-Confirm Setup-Exit
Default : The disc’s default language is selected.
Move …†
23
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 24
mac001 1200DPI 100LPI
Se tu p m e n u
PREFEREN CES / Vid e o Se ttin g s
Auto : Convert to the appropriate aspect ratio
automatically.
1
2
3
Press [SETUP].
Video Output
Progressive Scan Video provides the highest picture
quality with reduced flickering.
Use [œ/√] to select ‘Preferences‘.
While ‘Preferences‘ is selected, press [†] to
select ‘Video‘.
RGB : If you connect the HDD/DVD Recorder to an
analog television using the SCART jacks, set Video
Output to ‘RGB’.
4
Press [ENTER]. The ‘Video‘ submenu is
displayed.
Interla ce or Progressive : If you connect the
HDD/DVD Recorder to a digital television (DTV) or
Monitor using the COMPONENT jacks, set Video
Output to ‘Interlace’ or ‘Progressive’.
Preferences
Video
Audio
Parental Controls
Auto Settings
Hard Disk
Follow the same procedure as ‘TV Aspect Ratio’ to
change the ‘Video Output’.
Instructions:
Enter-Confirm Setup-Exit
Video
Move …†
TV Aspect
Auto
Video Output
Interlace
TV Aspect Ra tio
Select Video
Output
1
Use […/†] to select ‘TV Aspect‘ while the
‘Video‘ submenu is displayed.
Interlace
Progressive
RGB
Instructions:
Enter-Confirm Setup-Exit Mo
2
3
Press [ENTER] or [√] to go to the second level.
Use […/†] to select the desired ‘TV Aspect’.
Video
Ca u tio n
•
Once the Progressive Scan setting is entered,
an image will only be visible on a Progressive
Scan compatible TV or monitor. Press and
hold [P.SCAN] for 5 seconds to return to
Interlace Scan mode.
TV Aspect
Video Output
A
Select Picture
Inte
Format
4:3 LB
4:3 PS
16:9
Instructions:
Enter-Confirm Setup-Exit Move
Auto
4
5
Press [ENTER] to confirm your selection.
Press [SETUP] to exit the menu.
4 :3 LB : Select when a standard 4:3 TV is
connected. Displays theatrical images with masking
bars above and below the picture.
4 :3 PS : Select when a standard 4:3 TV is
connected. Displays pictures cropped to fill your TV
screen. Both sides of the picture are cut off.
1 6 :9 : Select when a 16:9 wide screen TV is
connected.
2 4
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 25
mac001 1200DPI 100LPI
Se tu p m e n u
PREFEREN CES / Au d io Se ttin g s
Bitstrea m
Follow the same procedure as ‘Video’ Settings to
select ‘Audio’ Settings.
Select when connected to a Dolby Digital or DTS
decoder (or an amplifier or other equipment with a
Dolby Digital or DTS decoder).
Preferences
Video
Dyna m ic Ra nge
While watching DVD movies, you may wish to
compress the dynamic range of the audio output
(the difference between the loudest and quietest
passages). This allows you to listen to a movie at a
lower volume without losing clarity of sound. Set
‘Dynamic Range‘ to Low or High for this effect.
Audio
Parental Controls
Auto Settings
Hard Disk
Instructions:
Enter-Confirm Setup-Exit
Move …†
Follow the same procedure as ‘Digital Output‘ to set
the ‘Dynamic Range’.
STEUP
Digita l Output
Audio
1
Use […/†] to select ‘Digital Output‘ while the
‘Audio’ submenu is displayed.
Digital Output
Dynamic Range
Virtual Surround
Bitstream
Off
Select Dynamic
2
3
Press [ENTER] or [√] to go to the second level.
Range
Use […/†] to select the desired digital output
type.
Off
Low
High
Instructions:
Enter-Confirm Setup-Exit Mo
Audio
Digital Output
Dynamic Range
Virtual Surround
Bit
Select Digital
Output
Virtua l Surround
Off
You can enjoy a simulated 3D effect from two
speakers by setting Virtual Surround to On.
Follow the same procedure as ‘Digital Output‘ to set
the ‘Virtual Surround’ option.
Bitstream
LPCM
Instructions:
Enter-Confirm Setup-Exit Move …†
Audio
4
5
Press [ENTER] to confirm your selection.
Press [SETUP] to exit the menu.
Digital Output
Dynamic Range
Virtual Surround
Bitstream
Off
Off
Select Virtual
Off
Surround
No signal will be output from the Digital Audio Out
jacks.
Off
Instructions:
On
LPCM
Enter-Confirm Setup-Exit Move …†
Select when connected to a 2 channel digital stereo
amplifier. The HDD/DVD Recorder's digital audio
signal will be output in the PCM 2ch format when
you play a DVD (or HDD) recorded with a Dolby
Digital (only for DVD) or MPEG soundtrack. If the
DVD is recorded with a DTS sound track then no
sound will be heard.
2 5
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 26
mac001 1200DPI 100LPI
Se tu p m e n u
PREFEREN CES / Pa re n ta l Co n tro ls
Set Pa renta l Level
The initial password is ‘0000‘. You must enter this
password before you can change the Parental
Level.
The Parental Controls feature allows you to prevent
DVDs from being played based on their ratings or to
have certain discs played with alternative scenes.
You can set the parental level from ‘Adult’ to ‘Kid
safe’.
Set the new password to something other than
'0000'.
5
After setting the password, press [ENTER]
while 'Set Parental Level' is displayed.
1
2
3
Press [SETUP].
6
7
Enter your new password.
Use [œ/√] to select ‘Preferences‘.
Use […/†] to select the desired parental level
and press [ENTER] to confirm.
While ‘Preferences‘ is selected, press [†] to
select ‘Parental Controls‘. And press [ENTER].
Off : If you select Unlock, the Lock feature is not
active. All discs will play in full.
Adult to Kid sa fe: Some discs contain scenes
not suitable for children. If you set a rating for
the HDD/DVD Recorder, all scenes with the
same rating or lower will be played. Higher
rated scenes will not be played unless an
alternative scene is available on the disc. The
alternative must have the same rating or a
lower one. If no suitable alternative is found,
playback will stop. You must enter the 4-digit
password or change the rating level in order to
play the disc.
Preferences
Video
Audio
Parental Controls
Auto Settings
Hard Disk
Instructions:
Enter-Confirm Setup-Exit
Move …†
4
Use […/†] to select ‘Set Parental Level’ and
press [ENTER]. The Password Input dialog will
appear. Enter a 4-digit password using the [0-9]
buttons. If this is the first time you have
entered a password, you will be prompted to
enter the password again to confirm it.
Parental Control
Set Parental Level
Change Password
Parental Country Cod
parental level
Off
Adult
NC-17
R
Select the
Set Hdd Parental Loc
Parental Control
Instructions:
Enter-Confirm Setup-Exit Move …†
Set Parental Level
Change Password
Off
Parental Country Code AU
Set Hdd Parental Lock Off
8
Press [ENTER] to confirm your rating selection,
then press [SETUP] to exit the menu.
Instructions:
Enter-Confirm Setup-Exit Move …†
Parental Control
Set Parental Level
Change Password
Adult
Change Password
Parental Country Code AU
Set Hdd Parental Lock Off
Current Code
_ _ _ _
_ _ _ _
Enter New Code
Confi
Password
Instructions:
Enter-Confirm Setup-Exit Move …†
Enter Password
Instr
Setu
* * _ _
Instructions:
Setup-Exit Enter-Confirm
2 6
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 27
mac001 1200DPI 100LPI
Se tu p m e n u
Cha nge Pa ssw ord
Pa renta l Country Code
1
2
3
While ‘Preferences‘ is selected, press [†] to
select ‘Parental Controls‘.
1
While ‘Preferences‘ is selected, press [†] to
select ‘Parental Controls‘. Then press [†] to
select ‘Parental Country Code‘.
Press [ENTER]. The ‘Parental Controls‘ submenu
appears.
Parental Control
Use […/†] to select ‘Change Password‘ then
press [ENTER].
Set Parental Level
Change Password
Adult
Parental Country Code AU
Set Hdd Parental Lock Off
Parental Control
Set Parental Level
Change Password
Parental Country Code AU
Set Hdd Parental Lock Off
Adult
Instructions:
Enter-Confirm Setup-Exit Move …†
STEUP
2
3
Press [ENTER]. Enter your current 4-digit
password then press [ENTER].
Instructions:
Enter-Confirm Setup-Exit Move …†
Use […/†] to select the desired country and
press [ENTER] to confirm.
4
5
The ‘Change Password’ submenu appears.
Enter your current 4-digit password.
Parental Country Code
Change Password
Please select Country for Parental Setup
…
Current Code
Enter New Code
Confirm Code
* * * *
* * * *
* * _ _
Australia
†
Belgium
Denmark
Finland
France
Instructions:
Setup-Exit Enter-Confirm
Instructions:
Enter-Confirm Setup-Exit Move …†
Enter a new 4-digit password. Re-enter the
new password to confirm, press [ENTER].
•
Ma ste r Pa ssw o rd
:
If you forget your
password, press 3,3,0,8 on the remote control
and then press [ENTER].
•
Set the new password to something other than
'0000'.
2 7
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 28
mac001 1200DPI 100LPI
Se tu p m e n u
PREFEREN CES / Au to Se ttin g s
Set Hdd Pa renta l Lock
It allows you to prevent from being played the title
parental locked in HDD video menu. You can set the
HDD parental lock as follow.
1
While ‘Preferences‘ is selected, press [†] to
select ‘Auto Settings‘.
2
Press [ENTER] to display the submenu.
1
While ‘Preferences‘ is selected, press [†] to
select ‘Parental Controls‘. And press [ENTER].
2
Use […/†] to select ‘Set Hdd Parental Lock’
and press [ENTER]. The Password Input dialog
will appear. Enter a 4-digit password using the
[0-9] buttons. If this is the first time you have
entered a password, you will be prompted to
enter the password again to confirm it.
Preferences
Video
Audio
Parental Controls
Auto Settings
Hard Disk
Instructions:
Enter-Confirm Setup-Exit
Move …†
Parental Control
Set Parental Level
Change Password
Adult
Parental Country Code AU
Auto Clock Set
Auto Clock enables the HDD/DVD Recorder to set
the clock automatically whenever it is in Standby
mode (plugged in but powered off).
Set Hdd Parental Lock Off
Select the
parental lock
Off
On
Instructions:
Enter-Confirm Setup-Exit Move …†
Auto Clock is only available for models with the VPS/PDC
function.
3
After setting the password, press [ENTER]
while 'Set Hdd Parental Lock' is displayed.
Some broadcasting stations may send the time and date
along with the VPS/PDC data. The video will
automatically use this time and date during the initial
setting up procedure during normal use, and every time
you switch the video off at the mains. If you find that this
time and date is incorrect you can remove this feature by
following the steps below changing it to the OFF mode,
you will then have to manually set the time and date, see
above.
4
5
Enter your new password.
Use […/†] to select the desired parental level
and press [ENTER] to confirm.
Off : If you select Off, the Lock feature is not
active. All titles in the HDD will play in full.
On : If you select On, the Parental Lock feature
is active in HDD Edit menu. To playback the
title parental locked in HDD video menu, you
must enter the 4-digit password. For detailed
information, refer to page 50.
1
Use […/†] to select 'Auto Clock Set' and press
[ENTER].
2
Use […/†] to change the 'Auto Clock Set'
status, and press [ENTER] to confirm.
6
Press [ENTER] to confirm your rating selection,
then press [SETUP] to exit the menu.
Auto Settings
Auto Clock Set
VPS/PDC
On
Select Auto
Clock Status
Off
On
Instructions:
Enter-Confirm Setup-Exit Move …†
2 8
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 29
mac001 1200DPI 100LPI
Se tu p m e n u
VPS/ PDC
Auto Title Delete
VPS/PDC is a service provided by some stations to
enable you to perform timer recordings precisely
even if the broadcaster delays the start time of the
program slightly. The time you enter is the VPS/PDC
time so this must be correct. Not all stations offer
VPS/PDC, in which case the player will start at the
time you enter and not the actual start time of the
programme.
If you wish to start recording at a specific time
without it being adjusted by the VPS/PDC system in
the event of a delay, switch VPS/PDC off otherwise
the player will not record.
1
Use […/†] to select ‘Auto Title Delete‘ while
the ‘Hard Disk’ submenu is displayed. Press
[ENTER] or [√] to go to the second level.
HDD Preferences
Auto Title Delete
Buffering Mode
Jump To Interval
Reset Hard Disk
On
PrSelect Auto
5 Delete
Off
On
Model : ST3160022ACE
Instructions:
Enter-Confirm Setup-Exit Move …†
Follow the same procedure as ‘Auto Clock Set’ to
set the ‘VPS/PDC’ status.
STEUP
2
3
4
Use […/†] to select the desired option.
Press [ENTER] to confirm your selection.
Press [SETUP] to exit the menu.
Auto Settings
Auto Clock Set
VPS/PDC
On
On
Select VPS/
PDC Status
Off
Off
On
With this selection, the HDD/DVD Recorder will
stop recording and prompt the user to erase some
titles and create more room on the HDD, if the
[STOP] is not pressed and the recording takes all the
available space on the hard disk drive.
Instructions:
Enter-Confirm Setup-Exit Move …†
"VPS/PDC" and "Auto Clock Set" are not provided
for some countries.
On
With this selection, the HDD/DVD Recorder
overwrites un-protected titles, if the [STOP] is not
pressed and the recording takes all the available
space on the hard disk drive.
PREFEREN CES / Ha rd Disk
1
While ‘Preferences‘ is selected, press [†] to
select ‘Hard Disk‘.
Buffer Mode
1
Use […/†] to select ‘Buffering Mode‘ while
the ‘Hard Disk’ submenu is displayed. Press
[ENTER] or [√] to go to the second level.
2
Press [ENTER] to display the submenu.
HDD Preferences
Preferences
Video
Audio
Parental Controls
Auto Settings
Hard Disk
Auto Title Delete
Buffering Mode
Jump To Interval
Reset Hard Disk
On
PrSelect Buffering
5 Mode
Preserve
Refresh
Model : ST3160022ACE
Instructions:
Enter-Confirm Setup-Exit
Move …†
Instructions:
Enter-Confirm Setup-Exit Move …†
2 9
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 30
mac001 1200DPI 100LPI
Se tu p m e n u
2
3
4
Use […/†] to select the desired option.
Reset Ha rd Disk
This feature enables you to erase the entire content
of the HDD. Please proceed with caution, as this
process is irreversible.
Press [ENTER] to confirm your selection.
Press [SETUP] to exit the menu.
1
Use […/†] to select ‘Reset Hard Disk’ while
the ‘Hard Disk’ submenu is displayed.
Preserve
“Preserve” maintains the content of the buffer upon
changing the TV channel.
2
Press [ENTER].
Refresh
HDD Preferences
Refreshes the buffer upon changing the TV channel.
Auto Title Delete
Buffering Mode
Jump To Interval
Reset Hard Disk
On
Preserve
5 Min
Jum p To Interva l
This feature enables you to skip to interval which is
set in timeshift mode.
Model : ST3160022ACE 250GB
1
Use […/†] to select ‘Jump To Interval‘ while
the ‘Hard Disk’ submenu is displayed. Press
[ENTER] or [√] to go to the second level.
Instructions:
Enter-Confirm Setup-Exit Move …†
HDD Preferences
3
4
The Reset menu will appear. Use the […/†]
buttons to select ‘Yes‘ or ‘No’ and press
[ENTER].
Auto Title Delete
Buffering Mode
Jump To Interval
Reset Hard Disk
On
PrSelect Jump
5 Interval
Select ‘Yes‘ to begin Hard Disk Formatting.
While hard disk is reformatted, do Not power
Off absolutely.
30 Sec
1 Min
Model : ST3160022ACE
3 Min
Instructions:
Enter-Confirm Setup-Exit Mo
5 Min
Reset Hard Disk
All recorded programs will be
deleted. Are you Sure?
2
3
4
Use […/†] to select the desired option.
Press [ENTER] to confirm your selection.
Press [SETUP] to exit the menu.
Yes
No
Instructions:
Enter-Confirm Setup-Exit
Reformat Hard Disk
Hard Disk currently Erasing.
Please do not power off...
5
Power is turned off automatically when HDD
reset is finished.
3 0
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 31
mac001 1200DPI 100LPI
Se tu p m e n u
Sy ste m In fo rm a tio n
Re sto re De fa u lts
System Information helps service personnel identify
key firmware information about your HDD/DVD
Recorder in case service is required.
If you wish, you can reset the HDD/DVD Recorder to
its original factory settings.
1
2
Press [SETUP].
Use [œ/√] to select ‘Restore Defaults‘.
System Info
System Version
DivX VOD
Restore Defaults
If you select this function all
settings will be removed and
the product will be set into
initial (factory) mode.
System Version
Version
FD30902DXVL
3.6.5
23.10.5
BDR-B2DY
Main Build
Instr
Micom Software
Ente
Loader Version
Instructions:
Mov
STEUP
Enter-Confirm Setup-Exit
Move …†
Instructions:
Setup-Exit
3
4
Press [ENTER].
The Initialize menu will appear. Use the […/†]
buttons to select ‘Yes‘ and press [ENTER].
System Info
System Version
DivX VOD
Restore Defaults
Are you sure you want to restore
default settings?
DivX Video On Demand
Your registration code is : 6S4XBYKI
Yes
Instr
Ente
Mov
No
Instructions:
Enter-Confirm Setup-Exit
Instructions:
Setup-Exit
•
•
Some options cannot be reset, including
Parental Controls, Password, and Country
Code.
After Restoring Defaults, the unit is powered
off automatically. At this time, if you power on
again, the Installation menu appears. You
must set the country, language, channel, and
clock settings again.
We provide you the DivX® VOD (Video On Demand)
registration code that allows you to rent and
purchase videos using the DivX® VOD service. For
3 1
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 32
mac001 1200DPI 100LPI
O n -Scre e n Disp la y O ve r vie w
O n -Scre e n Disp la y O ve r vie w
The On-Screen Display provides feedback on the
3
Use […†] to change the numbers. Press [ENTER]
to confirm.
status of the HDD/DVD Recorder and/or the
currently loaded disc or HDD. To access the On-
Screen Display (or OSD), press [DISPLAY].
Cha pter
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
1
Press [DISPLAY] during playback. The on-screen
display appears on the TV screen.
Disp la y in g Disc In fo rm a tio n
To display information about the currently loaded
disc or HDD:
2
Use […†] to select the ‘Chapter‘ icon on the on-
screen display. Press [ENTER] to display a
submenu.
On-screen displa y opera tion
3
Use […†] to change the numbers. Press [ENTER]
to confirm.
1
Press [DISPLAY] repeatedly to display/change
the information displayed on-screen.
2
To remove the on-screen display, press
[DISPLAY] repeatedly until it disappears.
Angle
Shows the current angle number and total number of
angles, and changes the angle number.
See the descriptions below for detailed
explanations of the on-screen displays for each
media type.
1
Press [DISPLAY] during playback. The on-screen
display appears on the TV screen.
Some discs may not provide all the features shown
in the on-screen display examples.
2
Use […†] to select the ‘Angle‘ icon on the on-
screen display. Press [ENTER] to display a
submenu.
Tem pora ry Feedba ck Icons
3
Use […†] to change the numbers. Press [ENTER]
to confirm.
Action prohibited or not available
Audio
Shows the current audio soundtrack language,
encoding method, and channel number, and changes
the setting.
Disc In fo rm a tio n o p tio n s fo r DVD, HDD
1
Press [DISPLAY] during playback. The on-screen
display appears on the TV screen.
DVD
HDD
Title
Chapter
Angle
Audio
Subtitle
1 of 3
23 of 41
1 of 1
2. Eng
Off
Title
Chapter
Audio
1 of 3
23 of 41
2. Eng
2
Use […†] to select the ‘Audio‘ icon on the on-
screen display. Press [ENTER] to display a
submenu.
Elapsed
01:29:31
Elapsed
Instructions:
Enter-Confirm Setup-Exit
01:29:31
3
Use […†] to change the numbers. Press [ENTER]
to confirm.
Instructions:
Enter-Confirm Setup-Exit
Move …†
Move …†
Subtitle
Title
Shows the current subtitle language, and changes the
setting.
Shows the current title number and total number of
titles, and skips to the desired title number.
1
Press [DISPLAY] during playback. The on-screen
display appears on the TV screen.
1
Press [DISPLAY] during playback. The on-screen
display appears on the TV screen.
2
Use […†] to select the ‘Subtitle‘ icon on the on-
screen display. Press [ENTER] to display a
submenu.
2
Use […†] to select the ‘Title‘ icon on the on-
screen display. Press [ENTER] to display a
submenu.
3
Use […†] to change the numbers. Press [ENTER]
to confirm.
3 2
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 33
mac001 1200DPI 100LPI
O n -Scre e n Disp la y O ve rvie w
Ch a n g in g th e TV Au d io Ch a n n e l
Ela psed
You can change the TV audio using the [AUDIO]
button.
Shows the elapsed playing time, and skips to the
desired time.
Press [AUDIO] repea tedly to cha nge the TV a udio,
a ccording to the Broa dca st a udio signa l a s show n
below .
1
Press [DISPLAY] during playback. The on-screen
display appears on the TV screen.
2
Use […†] to select the ‘Elapsed’ icon on the on-
screen display. Press [ENTER] to search by time.
The submenu appears.
•
STEREO Audio Signa l
Stereo ➝ Mono ➝ Stereo
3
4
Use […†] to change the numbers and use [œ √]
to move left or right.
•
BIL Audio Signa l
BIL I ➝ BIL II ➝ (BIL Off) ➝ BIL I
Within 7 seconds, press [ENTER] to confirm the
start time. Playback starts from the selected time
on the disc.
•
MONO Audio Signa l
Mono
STEUP
The current audio channel is displayed on-screen.
For the title recorded without DVD navigation
information, such as the one from broadcast or line
input, ‘Elapsed’ function does not work.
•
If the sound is poor quality when set to Stereo,
you can often improve it by changing to Mono.
•
When an external input is selected, the audio
channel can be switched only to Stereo.
Ch a n g in g TV Ch a n n e ls
If no disc is playing, you can change TV channels
using the [0-9] or [PR+/–] buttons on the remote
control or [PR+/–] buttons on the front panel.
3 3
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 34
mac001 1200DPI 100LPI
DVD Pla y b a ck
DVD Pla y b a ck
Pla y in g a DVD
Still Picture a nd Fra m e-by-Fra m e Pla yba ck
1
Press [DVD] to set the remote
control to operate the DVD.
1
Press [PLAY/PAUSE] during playback. The
HDD/DVD Recorder will go into Still mode.
DVD Selected
Turn the TV on and select the
video input source connected
to the HDD/DVD Recorder.
Actions are now for
DVD
2
You can back up or advance the picture frame-
by-frame by pressing [FF (√√ )] repeatedly
during Still mode.
■ Stop
Audio system: Turn the audio
system on and select the input
Fa st Forw a rd/ Ba ck w a rd
source connected to the HDD/DVD Recorder.
1
Press [REW (œœ )] or [FF (√√ )] during playback.
The HDD/DVD Recorder will go into Search
mode.
2
3
Press [OPEN/ CLOSE] to open the disc tra y.
Loa d your disc in the tra y w ith the pla yba ck side
dow n (la bel side up).
2
Press [REW] or [FF] to select the desired speed:
√√ X2, √√ X4, √√ X8, √√ X16, √√ X32,
(forward) or , œœ X2, œœ X4, œœ X8, œœ
X16, œœ X32 (backward).
√
4
5
Press [OPEN/ CLOSE] to close the tra y.
œ
'LOAD' appears on the front panel display, and
playback starts automatically. If playback does
not start, press [PLAY (
Disc menu may appear instead.
√)]. In some cases, the
Slow Motion
Press [SLOW+] or [SLOW-] to select the desired
speed: 1/2, 1/4, 1/8,1/2, ...(forward), or 1/2, 1/4,
1/8, 1/2, ... (backward).
Pla ying a DVD
When a DVD+RW or unfinalised DVD+R/-R/-RW is
inserted, no title is played automatically but the
current TV channel displays on the screen.
If you want to play a title on the DVD+R (+RW), you
must press [MENU] or [PLAY] to display the disc
menu. Select a title to play then press [ENTER].
Cha nging the Audio La ngua ge
Press [AUDIO] and then press
[
AUDIO repeatedly
]
during playback to hear a different audio language
or audio track.
Subtitles
Press [SUBTITLE] and then press
repeatedly during playback to select among all
available subtitle languages.
If a Disc m e n u is d isp la y e d
•
A Disc menu may be displayed when you load
a DVD. Use the [œ √…†] buttons to select
the title/chapter you want to view, then press
[ENTER] to start playback. Press [TITLE] or
[MENU] to return to the Disc menu.
[
SUBTITLE
]
Zoom
•
•
•
The HDD/DVD Recorder will not play discs
with Region codes different from the HDD/DVD
Recorder. The Region code for this HDD/DVD
Recorder is 2 (two).
Unless stated otherwise, all operations
described below use the remote control. Some
features may also be available in the Setup
menu.
A disc which is recorded by computer at high
speeds (greater than or equal to 2x) may not be
recognized.
A disc which is recorded with unauthorized
movie material may not be played.
A disc which is recorded by another recorder or
not recorded correctly may not be recognized
or played.
The Zoom function allows you to magnify the video
image and scroll around the enlarged image.
1
Press [ZOOM] during Play mode to activate the
Zoom function.
Each press of the [ZOOM] button changes the
Zoom level as follows: X1 (normal size) ➝ X2
➝ X4 ➝ X1 (normal size)
2
3
Use the [œ √…†] buttons to scroll around the
zoomed picture.
•
•
To resume normal playback, press [ZOOM]
repeatedly until the X1 (normal picture)
appears.
3 4
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 35
mac001 1200DPI 100LPI
DVD Pla y b a ck
•
•
The Zoom function may not work on some
DVDs (ex. Jpg..)
The Zoom function does not work in PAUSE
mode.
Selecting Titles
When a disc has more than one title, you can select
among all available titles as follows:
1
Press [DISPLAY] and use […†] to select the
Title icon. Press [ENTER] to display a submenu.
Use […†] to select the desired title number
and press [ENTER] to confirm.
Repea t
1
2
3
4
To repeat the currently playing chapter, press
[REPEAT]. ‘REPEAT CHAPTER’ appears on the
TV screen.
Selecting Cha pters
When a title on a disc has more than one chapter,
you can select among all available chapters as
follows:
To repeat the currently playing title, press
[REPEAT] twice. ‘REPEAT TITLE’ appears on the
TV screen.
1
Press [PREV (§)] or [NEXT (∞)] briefly during
playback to select the next or previous chapter.
To repeat the whole disc, press [REPEAT] three
times. ‘REPEAT DISC’ appears on the TV
screen.
2
To skip directly to any chapter during playback,
press [DISPLAY]. Use […†] to select the
Chapter icon, then press [ENTER] to display a
submenu. Use […†] to select the desired
chapter number and press [ENTER] to confirm.
Each press of the [REPEAT] button changes the
repeat mode as follows:
[DVD] Chapter ➝ Title ➝ Disc ➝ off ➝
Chapter ...
PYLBACK
Disc Menus
[VCD] Track ➝ Disc ➝ Off ➝ Track ...
Many DVDs contain Disc menus that allow you to
access special features. To open a Disc menu, press
[MENU]. Then use the […†] buttons to highlight
your desired selection and press [ENTER].
[CDDA, MP3] Track ➝ All ➝ Off ➝ Track ...
A-B
1
2
Press [MENU]. The Disc menu is displayed.
To exit the Disc menu, press [STOP] or [HDD].
You can repeat a scene between two points (A and
B):
1
Press [PLAY/PAUSE] play to the start of the
desired scene.
Title Menus
2
3
4
5
Press [A-B] to mark the start point.
Use [FF], [NEXT] to search the end point.
Press [A-B] to mark the end point.
1
Press [TITLE]. If the current title has a menu,
the Title menu will appear on the TV screen.
Otherwise, the Disc menu may appear.
2
The Title menu may contain camera angles,
spoken languages and subtitle options, as well
as the chapters for the title.
The marked scenes are repeated continuously
until you stop the repeat by pressing [A-B]
button again.
Sea rch
1
Press [SEARCH] to display
the Search menu.
T/
3
œ
C
1
…
†
2
Use [œ √] to move to Title
(T) or Chapter (C) and use
√
[…†] to set the title or chapter number.
3 5
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 36
mac001 1200DPI 100LPI
Pla y in g a Pictu re , Mu sic o r DivX file s
Pla y in g a Pictu re , Mu sic o r DivX file s
DivX Pla y b a ck (HDD Me d ia , DVD)
The HDD/DVD Recorder can play DivX files on a
disc such as CD-R/RW, DVD+R/RW, DVD-R/RW, or
Subtitles
When the subtitles are not displayed provided
although it has a file of subtitles:
on HDD Media.
1
2
Prior to playing Divx files on disc, insert disc
and close the tray.
1
2
3
4
Move to the Menu of DivX by pressing the
[STOP] button.
Press [MENU] to bring up the Media Browser
and select the media (HDD Media, DVD) you
want to play.
Use […†] to select a file of subtitles you want
by using it.
Select the file of subtitles at that time by
pressing the [ENTER] button.
HDD Media Browser
HDD Pictures
HDD Music
After moving the file of DivX you want to play,
play it by pressing the [ENTER] button.
HDD DivX
55 Files
DVD Browser
DVD Pictures
DVD Music
DVD DivX
•
Playable DivX files are ".avi",".divx" and
playable DivX subtitles are ".smi", ".srt", ".txt",
".sub (Micro DVD,Subviewer)".
55 Files
Move-
•
•
The file size of the DivX subtitle is limited to
128KB.
Playable MPEG 4 SP and ASP is XVID, DivX5.1,
DivX5.05, DivX5.02, DivX4.1.2, DivX3.11, and
Dr. DivX1.0.2.
3
Press [ENTER] and select the DivX category
using […†], then press [ENTER].
DVD DivX
•
ASP does not support GMC & Qpel(Quarter
Pixel).
Item : DivX
Vid : 1/2
.. \
1 Shrek 2-1.AVI
2 Shrek 2-2.AVI
•
•
Playable biterates is to max. 4MBPS.
Playable frame number of screens per a
second is 30, 25, 24, 12, and 8.
•
•
•
Playable resolution is from Min. 200X100 to
max. 720X576.
2 Items
Move-…†œ √ Edit-EDIT Copy-DUB
1/2 …†
Exit-SETUP
Playable audio stream formats are DTS, MPEG
I Layer III, MPEG II, PCM and AC-3.
It may not be played according to a type of
DivX files, a recording method, or a disc state.
(The device was authenticated for DivX files
from the DivX Networks, Inc. and it is available
for playing a normal DivX but may be
unavailable for playing the DivX files that have
been manufactured with an illegal or abnormal
Codec.)
DivX,DivX certified and associated logos are
trademarks of DivX Networks, Inc. and are
used under license.
When the image/sound structure of a recorded
file have not been undergone the interleave, it
will output either the image or the sound.
4
5
6
The DivX Menu appears on the TV screen.
Use […†] to select a file, then press [ENTER].
Press [FF] or [REW] during playback. The
HDD/DVD Recorder will go into Search mode.
Press [FF ]or [REW ]to select the desired speed:
√√ X2, √√ X4, √√ X8, √ PLAY (forward) or
œœ X2, œœ X4, œœ X8, œ PLAY (backward)
•
•
Use [PLAY/PAUSE] to pause playback while the
title is playing.
7
To stop playback at any time, press [STOP].
3 6
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 37
mac001 1200DPI 100LPI
Pla y in g a Pictu re , Mu sic o r DivX file s
Au d io CD Pla y b a ck
The HDD/DVD Recorder can play audio CDs on CD-
R/RW, DVD+R/RW, DVD-R/RW.
DVD Music
Item : MP3
Tr : 10/204
01 INTRO.MP3
01 SHE’S MINE.MP3
01 --,--- --- --.MP3
1
Insert the disc and close the tray. In case an
audio CD is already loaded, press [MENU] and
select the DVD browser using […†], then
press [ENTER].
■STOP
01 --,--- --- --.MP3
01 CLOSE YOUR EYES.MP3
01 TIMELESS-S.G..MP3
01 TOO LATE.MP3
01 ROCK WITH YOU.MP3
01 IT’S MY LIFE.MP3
01 --,--- --- --.MP3
Normal
2
The CD Music folder tree appears. Use […†]
to select a track or a file, then press [ENTER]
twice or just [PLAY].
216 Items
Move-…†œ √ Edit-EDIT Copy-DUB
22/216 …†
Exit-SETUP
Playback will stop at the end of the disc.
•
On the MP3 CD menu, you can display the
folders on the disc. Use […†] to select the
folder icon on the MP3 CD menu then press
[ENTER]. You can also display just the tracks in
the folders. Use […†] to select a folder then
press [ENTER].
Press [REPEAT] to repeat a track (file) and press
again to repeat the whole media.
If the disc contains JPEG files as well as MP3
files, you can change the Play mode to display
JPEG image files by pressing [MENU].
CD Music
Item : CD Audio
Tr : 3/13
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
TRACK 9
TRACK 10
00:03:45
00:03:46
00:03:47
00:03:48
00:03:49
00:03:50
00:03:51
00:03:52
00:03:53
00:03:54
■STOP
Normal
•
•
13 Tracks
1/13 …†
PYLBACK
Move-…†œ √ Select-ENTER Back-MENU Exit-SETUP
3
4
5
While playing an Audio CD, use [FF] or [REW]
for 2x speed playback.
Use [PLAY/PAUSE] to pause playback while the
disc is playing.
To stop playback at any time, press [STOP].
JPEG Pla y b a ck (HDD Me d ia , DVD)
The HDD/DVD Recorder can play JPEG Picture files
on a disc such as CD-R/RW, DVD+R/RW, DVD-
R/RW, or on HDD Media.
MP3 Pla y b a ck (HDD Me d ia , DVD)
The HDD/DVD Recorder can play MP3 files on a
disc such as CD-R/RW, DVD+R/RW, DVD-R/RW, or
on HDD Media.
1
Prior to playing Divx files on disc, insert disc
and close the tray.
2
Press [MENU] to bring up the Media Browser
and select the media (HDD Media, DVD) you
want to play.
1
Prior to playing Divx files on disc, insert disc
and close the tray.
2
Press [MENU] to bring up the Media Browser
and select the media (HDD Media, DVD) you
want to play.
3
4
Press [ENTER] and select the Picture category
using […†], then press [ENTER].
The JPEG folder tree appears. If there are
folders which contain JPEG files, select the
desired folder using […†] and press [ENTER].
3
4
Press [ENTER] and select the Music category
using […†], then press [ENTER].
The MP3 folder tree appears. Use […†] to
select a track or a file, then press [ENTER] or
[PLAY].
5
Select the thumbnail you want to display using
[…†] and press [ENTER].
Playback will stop at the end of the media.
3 7
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 38
mac001 1200DPI 100LPI
Pla y in g a Pictu re , Mu sic o r DivX file s
Pla y in g MP3 File s Du rin g a Slid e Sh o w
You can enjoy a slide show while listening to MP3
music files.
DVD Pictures
Item : JPG
Pic : 2/143
.. /
IMG_0248.JPG
IMG_0250.JPG
IMG_0261.JPG
IMG_0268.JPG
IMG_0266.JPG
IMG_0277.JPG
IMG_0282.JPG
1
Prepare the Disc which includes both MP3 and
JPEG files. Or copy the files to HDD Media
category.
2
3
4
Insert the disc. Then press [MENU] to bring up
Media browser.
24 Items
2/24 …†
Exit-SETUP
Move-…†œ √ Edit-EDIT Copy-DUB
Select the media you want to play between
HDD Media and DVD and go to music category.
6
The full size image will be displayed and a slide
show starts automatically with a time interval
of 10 seconds.
During playback of the MP3 files, press [MENU]
to return to the selected media browser. The
music playback will not stop.
5
6
Go to Picture category, and select the image
files and press [ENTER] to start the slide show.
The MP3 files you selected continue to play
during the JPEG slide show.
•
•
The HDD/DVD Recorder can playback up to
1000 files per disc.
Press [œ/ √] to move up and down per 10 files
in DVD(HDD) Pictures(Music,DivX) Browser.
Either HDD Videos does.
Customers should note that permission is
required in order to download MP3 and music
from the Internet. Our company has no right to
grant such permission. Permission should
always be sought from the copyright owner.
7
8
Press [NEXT] or [PREV] to manually skip to the
next or previous image.
Press [√] (or [œ]) to rotate the image (counter)
•
clockwise.
9
Press [STOP] to exit the slideshow.
•
•
•
If the disc contains MP3 files as well as JPEG
files, you can change the Play mode to play
MP3 files by pressing [MENU].
When a CD contains both MP3 files and JPEG
files, the default Play mode is JPEG image
files.
MP3 files encoded below 32kbps are not
supported.
3 8
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 39
mac001 1200DPI 100LPI
Tim e sh iftin g & Sa vin g
Tim e sh iftin g & Sa vin g
Tim e sh iftin g in HDD m o d e
If you are using the default value of “Setup –>
Preferences –> Hard Disk –> Buffer mode –>
Refresh”, and change Channels, the Time shifting
buffer data will be lost. No message will be
provided prior to doing so. However, if you set
“Setup –> Preferences –> Hard Disk –> Buffer
mode –> Preserve”, and change Channels, the Time
shifting buffer data will be maintained.
When the HDD/DVD Recorder is turned on or you
press the [HDD] button on the remote control or the
[DVD/HDD] button on the front panel to move to
HDD mode from other menus, the last viewed TV
channel will be tuned in and Time shifting starts
automatically. Time shifting allows ‘pausing’ the
live TV broadcast for up to 60 minutes. At any time,
the viewing can resume. Press [PLAY/PAUSE] to
pause the broadcast, press [PLAY/PAUSE] again to
resume TV viewing. If the system is paused for 60
minutes, it will automatically resume TV viewing.
During Time shifting, a Timer recording may come
up. As you cannot watch one program in Time
shifting and record another channel, the HDD/DVD
Recorder will prompt you to confirm if you want to
keep the current channel or proceed with Timer
recording. If there is no response, this combination
assumes Timer recording should be started. The
message will appear 5 seconds before the TImer
recording is due.
Time shifting is stored in a buffer that contains 60
minutes of recording. After 60 minutes, the buffer
will be progressively overwritten. If you need to
keep the video contained in this buffer for future
usage, you can Save all or part of the buffer.
12 : 34
13 : 34
√ LIVE
PYLBACK
Press [STOP] to return to the live broadcast.
Na viga tion in Tim e Shifting m ode
You can navigate in Time shifting mode and control
the output by using the following remote control
keys:
Changes the channel
Fast Forward. Press to cycle
through 2, 4, 8, 16, 32X speeds.
Fast Rewind. Press to cycle
through 4, 8, 16, 32X speeds.
Slow forward/reverse. Press to
cycle through 1/2, 1/4 or 1/8
speeds.
Jumps back to the 'jump to
interval' time is set in the setup
menu.
Jumps forward to the 'jump to
interval' time is set in the setup
menu. Refer to page 30.
3 9
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 40
mac001 1200DPI 100LPI
Tim e sh iftin g & Sa vin g
Sa vin g to HDD
•
If th e u n it is se t a s “ Se tu p –> Pre fe re n ce s
–> Ha rd Disk –> Au to Title De le te –> O n ”
Sa ve
if the [STOP] is not pressed and the recording
takes all the available space on the hard disk
drive, the HDD/DVD Recorder will erase
unprotected titles to the amount of about 10
hours in HQ mode (approx. 40GB) and keep
recording.
While viewing a program, press [REC]. This will
start saving the segment you are watching. You can
navigate forward. During the saving operation, by
pressing [REC], you will increase the length of the
program you are saving by 15 minutes up to a
maximum of 10 hours. Press [STOP] to indicate the
end of the saving operation. In case of recording a
part of Time shifting buffer, the buffer will be
empty.
•
If th e u n it is se t a s “ Se tu p –> Pre fe re n ce s
–> Ha rd Disk –> Au to Title De le te –> O ff”
if the [STOP] is not pressed and the recording
takes all the available space on the hard disk
drive, the HDD/DVD Recorder will stop
recording and prompt the user to erase some
titles and create more room on the HDD.
If you want to stop recording in Time shifting
specific operation (FF, REW, STILL, etc), press
[STOP] to return to LIVE mode and then press
[STOP] again.
You can not change the channel or the source if
saving is on-going (the end of the recording
segment is either not entered, or in case of a long
recording, it has not been reached.) Saving has to
be manually stopped first ( by pressing [STOP].) The
HDD/DVD Recorder will prompt you to Stop saving
first. The segment will be saved on the HDD and
then channel or source change will be performed.
•
The saved program will be removed from the Time
shifting buffer when it is about to be overwritten by
a Live recording. During recording from the Time
shifting buffer, [PLAY/PAUSE] dose not work as
pause(play) the recording but work as pause(play)
the broadcast in the buffer.
Indicates
recording to
the HDD and
Rec Speed
recording
Indicates Time shifting operation: PLAY,
STILL, LIVE, STOP, FF, REW, etc
Other Opera tions in TIm e shifting sa ving m ode
While in Time shifting saving mode, you can use the
following keys for other operations: HDD, DVD,
MENU, OPEN/CLOSE, SETUP, INPUT, P.SCAN
buttons.
4 0
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 41
mac001 1200DPI 100LPI
Ba sic Re co rd in g
Ba sic Re co rd in g
Re co rd in g to DVD o r HDD
5
6
Press [REC ( ●)] once.
If you press [DVD] or [HDD], you will be in DVD or
HDD mode.
You can start recording to DVD or HDD by pressing
the [REC] button. (In the case of a DVD, it must be a
recordable media in the tray.)
Recording will start. The REC indicator lights on
the front panel display.
Recording continues until you press [STOP] or
the disc is full.
To record for a fixed length of time, see One
Touch Record.
1
Turn on the HDD/ DVD Recorder a nd loa d a
recorda ble disc .
Press [STOP (■)] to stop recording.
Make sure your TV input is set to view the
HDD/DVD Recorder.
•
The maximum number of DVD titles per disc is
49. If the HDD/DVD Recorder is powered off
during DVD recording, the recording will not be
saved.
If a DVD+RW or unfinalised DVD±R, DVD-RW
disc is inserted in the tray, no title is played
automatically after loading is finished.
If you are recording to a blank DVD±R (±RW)
disc, it may take up to 7 minutes (it depends on
the disc) for post processing after recording.
Select the media to record by pressing [DVD] ,
[HDD], or [DVD/HDD] on the front panel.
2
Set the desired Recording m ode by pressing [REC
SPEED] repea tedly.
•
•
Available
disc (or
HDD)
Record Mode
Record Mode
Dvd record quality
now set to :
Hdd manual record
quality set to :
space will
be
displayed
by
HQ 0Hrs 58Mins
HQ 27Hrs 13Mins
PYLBACK
selecting
recording
mode.
■ Stop
√ LIVE
O n e To u ch Re co rd (O TR)
One Touch Recording allows you to add recording
time in fixed increments at the touch of a button.
3
4
Set the desired Recording source by pressing [DV]
or [INPUT].
1
2
Follow steps 1 -4 under Recording from TV.
You can select which video input you want to
record from the following options are available.
TV, AV, AVF, S-VIDEO Input, DV Input
Press [REC ( ●)] repea tedly to set the length of the
recording.
Press [AUDIO] to select the a udio cha nnel to
record (Stereo, BIL, or Mono).
Recording starts after the first press. Each
subsequent press increases the recording time
by 15 minutes within the available space (DVD)
or 10 hours (HDD). The recording time is
displayed on the front panel.
The table below shows what audio channel will
be recorded with different settings and
different types of broadcasts.
The last column (Monitor Audio) shows what
you will hear during recording. For example, if
the TV broadcast is in Stereo, then setting the
HDD/DVD Recorder to Stereo will record the
broadcast in Stereo, and the Monitor Audio will
also be in Stereo.
Bro a d ca st Au d io
L Ch R Ch
Mo n ito r
Au d io
TV
Bro a d ca st
Se le cte d
Au d io
MONO MONO MONO MONO
MONO
STEREO
STEREO
L
R
STEREO
MONO MONO MONO MONO
BIL I
BIL II
(BIL Off)
BIL I
BIL II
(BIL I)
BIL I
BIL II
(BIL I)
BIL I
BIL II
(BIL Off)
BIL
4 1
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 42
mac001 1200DPI 100LPI
Tim e r Re co rd in g
Tim e r Re co rd in g
To Pa u se th e Re co rd in g
Tim e r Re co rd in g u sin g Ma n u a l Se t
Re co rd Scre e n
1
Press [PLAY/PAUSE] to pause the disc during
recording.
The Timer Recording function allows you to record
up to 8 programs within a period of one month.
2
To continue recording in DVD mode, press
[PLAY/PAUSE] or [REC (●)].
1
Insert recorda ble m edia such a s DVD±R,
DVD±RW if you a re recording to DVD.
•
•
•
•
To quit One Touch Recording, press and hold
[STOP] for 5 seconds.
The HDD/DVD Recorder will automatically
power off when One Touch Recording ends.
You cannot record on the HDD and DVD at the
same time.
Pressing [PLAY/PAUSE] during HDD recording
does not act as record pause but time shifting
still. Recording is still under way and other
time shifting operation (FF, REW, etc) works
properly.
2
Press [TIMER].
The ‘Select Record Method’ menu appears.
Select Record Method
Please choose your preferred
method for scheduling a recording
Manual edit timer
VideoPlus
Timer Recording
PR No. Date Start End Mode
Instruct
---- --/-- --:-- --:-- ---
Enter-Co
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
Instructions:
Pla y in g u n d e r re co rd in g
1
Press [MENU] to play DVD or HDD during
recording. Then Media Browser appears.
Enter-Edit Setup-Exit Move …†
2
In Media Browser, Select and play the media
you want to view among HDD and DVD.
3
Select ‘Ma nua l edit tim er’ w ith […/ †] a nd confirm
w ith [ENTER].
The ‘Timer Recording’ menu appears.
Use […†] to move to a timer recording slot,
•
•
•
You can’t play a DVD disc during DVD
recording.
The maximum number of titles that can be
recorded on the HDD is 254.
Using the HDD allows you to record a
maximum of 10 hours continuously.
and press [ENTER] to modify it.
If you did not set the clock on the HDD/DVD
Recorder, you must do so before programming a
timer recording.
• Media - Choose desired media (DVD or HDD)
using […†].
• PR No. – Choose the desired channel, or one of
the external inputs from which to record.
• Date – Choose a date up to 1 month in
advance, or select a daily or weekly program.
• Start Time – Set the recording start time.
• End Time – Set the recording end time.
• Mode – Choose a Record mode.
HQ, SP, SLP or EP
• Repeat-Choose frequency of the recording.
Once, Daily, Weekly, Weekday.
4 2
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 43
mac001 1200DPI 100LPI
Tim e r Re co rd in g
finishes to confirm the recorded program. If
two timer recordings are set to record
sequentially (one right after the other), the very
beginning of the later program may not be
recorded.
4
Enter the necessa ry inform a tion for your Tim er
Recording(s).
•
œ √ – Moves the cursor left/right.
• …† – Changes the setting of the current
cursor position.
• Press [SETUP] to exit the Timer Record menu.
• Press [ENTER] after filling in all the program
information.
• Press [TIMER] to display the Timer Record List.
Tim e r Re co rd in g u sin g Vid e o Plu s
sy ste m
Thanks to this programming system, you no longer
need to tediously enter the date, programme
number, start and end time. All the information
needed by the HDD/DVD Recorder for programming
is contained in the VideoPlus programming number.
This VideoPlus number is found in most TV listings.
Edit Timer
Media
PR No.
Date
Start
End
Mode
Repeat
PR-03
02/Jan Sun
13:30
14:30
HQ
Once
Delete
Instructions:
Enter-Save Setup-Exit
1
Insert recorda ble m edia such a s DVD±R,
DVD±RW if you a re recording to DVD.
5
Press [ENTER] to sa ve the progra m .
2
Press [TIMER].
The Timer Record List will appear.
The ‘Select Record Method’ menu appears.
Timer Recording
PR No. Date Start End Mode
PR-03 02/01 13:30 14:30 HQ
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
Select Record Method
Please choose your preferred
method for scheduling
VideoPlus
Manual edit tim
VideoPlus
EOCRDING
6
7
Press [SETUP] to ex it the Tim er Record List.
Please enter your VideoPlus Code.
– – – – – – – – –
Tim er indica tor w ill light or sta rt blink ing. You
m ust pow er off the HDD/ DVD Recorder to sta rt
the Tim er Recording.
Instructions:
Enter-Confirm Set
•
The Timer indicator lights on the front panel
display when the HDD/DVD Recorder is ready
for the Timer Recording.
3
Select ‘VideoPlus’ w ith […/ †] a nd confirm w ith
[ENTER].
The ‘VideoPlus’ menu appears.
Enter the entire ‘VideoPlus’ number. This
number is up to 9 digits long and can be found
next to the start time of the TV programme in
your TV listings magazine.
•
The timer indicator will flash if any of the
following conditions occur;
- Empty or non-recordable disc is found in the
tray when DVD Timer recording starts.
- When you go into Media browser, SETUP,
Timer Recording menu after Timer Recording
setup.
- When you record the TV signal after Timer
Recording setup.
- When you play titles after Timer Recording
setup.
The HDD/DVD Recorder will automatically
power off when the Timer Recording ends.
There is a short delay when a timer recording
e.g.: 5-234-89 or 5 234 89
Enter 523489 for the ‘VideoPlus’ number.
If you make a mistake, you can clear it with
[CLEAR].
•
•
4
Press [ENTER] to confirm .
4 3
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 44
mac001 1200DPI 100LPI
Tim e r Re co rd in g
Tim e r Re co rd in g Tro u b le sh o o tin g
5
The decoded information appears after
confirmation. You can go back at any time to
change the information by pressing [ENTER].
Select the appropriate input field using […†].
If required, change the information using
[…†].
If all the information is correct, press the
[ENTER] button. The programming information
is stored in a TIMER block.
Even if a Tim er Recording is set, the HDD/ DVD
Recorder w ill not record if:
•
•
•
No disc is loaded.
A non-recordable disc is loaded.
‘Lock Disc’ is set to ON in the DISC Settings
menu; see page 54.
•
There are already 49 titles recorded on the disc
or 254 titles recorded on the HDD.
Timer Recording
You ca nnot enter a Tim er Recording if:
PR No. Date Start End Mode
PR-03 02/01 13:30 14:30 HQ
---- --/-- --:-- --:-- ---
•
A recording (dubbing, copying) or playing titles
is already under way.
----
Edit Timer
----
•
•
The start time has already passed.
Eight Timer Recordings have already been set.
Media
----
PR No.
PR-03
02/Jan Sun
----
Date
----
If tw o or m ore Tim er Recordings overla p:
Start 13:30
----
End 14:30
Instr
Mode HQ
•
•
The earlier program takes priority.
When the earlier program finishes, the later
program starts.
Ente
Repeat
Delete
Once
Instructions:
Enter-Save Setup-Exit
•
If two programs are set to start at exactly the
same time, the program entered first takes
priority.
6
7
Press [SETUP] to ex it the Tim er Record List.
Confirm a tion is not possible w hen:
•
•
Tim er indica tor w ill light or sta rt blink ing. You
m ust pow er off the HDD/ DVD Recorder to sta rt
the Tim er Recording.
The DISC Lock setting is set to ON.
There are already 49 titles recorded on the disc
or 254 titles recorded on the HDD.
VideoPlus is not available for some countries.
If the disc is damaged, the recording may not
complete successfully, even if the Check field
shows ‘Rec. OK‘.
Ca n ce lin g a Tim e r Re co rd in g
Re co rd in g Prio rity
You can clear a Timer Recording any time before
the recording actually starts.
•
Timer Recording and OTR (One Touch Record)
have the same priority but they have lower
priority than manual recording. During manual
recording, Timer Recording or OTR will be
ignored.
•
Use […†] to select the program you want to
erase on the Timer Recorder List, then press
[ENTER] to modify it. Use [œ √] to select
'Delete' then press [ENTER].
The cooling fan continues to work when a Timer
recording is set and VPS/PDC is turned ON,
because the HDD/DVD Recorder has to get time
data from the station.
Or just press [CLEAR] on the Timer Recorder
List.
Sto p p in g a Tim e r Re co rd in g in
Pro g re ss
After a Timer Recording has started, you can still
cancel the program by pressing and holding [STOP]
for 5 seconds.
4 4
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 45
mac001 1200DPI 100LPI
Re co rd in g fro m a n Ex te rn a l In p u t
Re co rd in g fro m a n Ex te rn a l In p u t
Re co rd in g fro m Ex te rn a l Co m p o n e n ts
DV Input screen appears. Then, if you select
'Yes', it will be changed to DV input.
You can record from an external component, such
as a camcorder, VCR or Digital Camera, connected
to any of the HDD/DVD Recorder’s external inputs.
3
4
Find the pla ce on the ca m corder ta pe from w hich
you w a nt to sta rt recording.
1
Ma k e sure the com ponent you w a nt to record
from is connected properly to the HDD/ DVD
Recorder; see pa ges 1 5 ~1 7 .
For best results, pause playback at the point
you want to start recording.
Press [REC] once to sta rt recording.
2
3
Use [PR+/ –] or [INPUT] to select the ex terna l input
to record from .
Recording is automatically paused if the
HDD/DVD Recorder detects no signal. You can
pause or stop the recording by pressing
[PLAY/PAUSE] or [STOP].
Loa d a recorda ble disc if you a re recording onto
a DVD. And then select HDD or DVD to record.
When you load a new, blank recordable disc
(DVD±RW, DVD±R), the recorder will take a
moment to initialize it for recording.
You can select media you want to record as
pressing the [DVD] or [HDD].
4
5
Set the desired Recording m ode by pressing [REC
SPEED] repea tedly.
Available disc (or HDD) space will be displayed
by selecting recording mode.
Press [REC ( ●)] once.
Recording will start. The REC indicator lights on
the front panel display.
Recording continues until you press [STOP] or
the disc (or HDD) is full.
To record for a fixed length of time, see ‘One
Touch Record‘ on page 40.
6
Press [STOP (■)] to stop recording.
EOCRDING
•
If your source is copy-protected, you will not be
able to record it using the HDD/DVD Recorder.
See ‘Copyright Notice‘ on page 8 for more
details.
Re co rd in g fro m a Dig ita l Ca m co rd e r
You can record from a digital camcorder connected
to the DV IN jack on the front panel of the
HDD/DVD Recorder.
1
Ma k e sure your digita l ca m corder is connected to
the front pa nel DV IN ja ck ; see pa ge 1 7 .
2
Press [DV] to select the DV input.
DV Input
This will stop the Timeshifting
Buffer. Proceed?
Yes
No
Instructions:
Enter-Confirm Setup-Exit Move …†
4 5
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 46
mac001 1200DPI 100LPI
Du b b in g
Du b b in g
Dubbing will copy the selected titles (+VR format)
with the same properties (title name, duration,
index picture, chapter mark) in HDD Videos to
DVD or vice versa.
The Media BROWSER can not be activated in the
middle of dubbing, that means play, stop, any edits
does not work.
HDD to DVD Dubbing
Add
1. Title PR-01 ----
Start Dubbing 2. Title PR-02 ----
3. Title PR-03 ----
4. Title PR-04 ----
5. Title PR-05 ----
6. Title PR-06 ----
Dub : 0 Titles
7. Title PR-06 ----
8. Title PR-06 ----
9. Title PR-06 ----
10. Title PR-06 ----
Du b b in g fro m HDD to DVD
HDD Space : 99% 13 Titles
1/13 …†
Move-…†œ HDD to DVD Dubbing
1
Prior to selecting titles for dubbing, you need to
insert a recorda ble disc into the tra y.
The DVD+HDD Combination may take a few
moments to format the disc if it is used for the
first time, determine compatibility and free
recordable space. During this time you will see
the Disc Loading logo.
Add
Start Dubbing HDD to DVD Dubbing
This will dub 1 title(s)
The Time Shift Buffer will stop
Continue?
Yes
No
Dub : 1 Titles
HDD Space : 99% 13 Titles
1/13 …†
2
Press [DUB], then 'Media Dubbing' a ppea rs.
Move-…†œ √ Select-ENTER Back-MENU
HDDEtxoit-SDETVUDP
You can see the titles in your HDD browser and
will select them to be dubbed to DVD.
Dubbing Completed
3
4
Select 'HDD to DVD' using […†] a nd press
[ENTER].
When dubbing process is completed, the tray will
be open automatically.
Select the title you w a nt to dub using […†] a nd
press [ENTER] to a dd.
Then select more titles using […†] and press
[ADD].
Repeating the same process, you can add many
titles.
You can see charged space you selected in
DVD with progress bar in red, also how many
titles you selected to be dubbed and free space
in DVD.
5
If you select a ll the titles you w a nt to dub, select
‘Sta rt Dubbing’ using […†].
Press [ENTER] to confirm, then Dubbing will be
started.
Media Dubbing
HDD to DVD
DVD to HDD
HDD to DVD Dubbing
Date : 22/06/05 1. Title PR-01 ----
Time : 11/16
2. Title PR-02 ----
Length : 00:13 3. Title PR-03 ----
Quality : HQ
4. Title PR-04 ----
5. Title PR-05 ----
6. Title PR-06 ----
7. Title PR-06 ----
8.TitlePR-06----
9. Title PR-06 ----
10. Title PR-06 ----
Dub : 0 Titles
Move-…†œ
HDD Space : 99% 13 Titles
1/13 …†
Move-…†œ √ Select-ENTER Back-MENU Exit-SETUP
4 6
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 47
mac001 1200DPI 100LPI
Me d ia file s Co p y in g
Me d ia file s Co p y in g
Du b b in g fro m DVD to HDD
Co p y in g a n d Ed itin g m e d ia file (DVD,
HDD)
1
Prior to selecting titles for dubbing, you need to
insert a disc to be dubbed into the tra y.
Copying will copy the media files (jpg, mp3, DivX)
in HDD Media to DVD, or vice versa.
2
3
Press [DUB], then 'Media Dubbing' a ppea rs.
HDD Media to HDD Media copy (DVD to DVD) is
also available.
If you want to copy media files on your DVD to HDD,
these files will be saved in each category (HDD
Pictures, Music, DivX) of HDD Media and they
cannot be saved in HDD Video.
The folders in the HDD media browser can be
viewed in any category, but the jpg files in folders
can only be viewed in HDD Pictures.
Mp3, DivX files in the folder can only be viewed in
the same way and either in DVD Media browser.
Select 'DVD to HDD'' using […†] a nd press
[ENTER].
4
Select the title you w a nt to dub using […†] a nd
press [ENTER] to a dd.
Then select more titles using […†] and press
[ADD].
Repeating the same process, you can add many
titles.
5
If you select a ll the titles you w a nt to dub, select
‘Sta rt Dubbing’ using […†].
If you want to copy media files in HDD Media to
your DVD, Disc recorded with DVD Video format
cannot be supported.
Press [ENTER] to confirm, then Dubbing will be
started.
Media BROWSER can not be activated in the middle
of Copying, that means play, stop, any edits do not
work.
Media Dubbing
HDD to DVD
DVD to HDD
1
Select the desired m edia to copy from .
Then enter the HDD Media Brow ser (or DVD
Media Brow ser).
DVD to HDD Dubbing
Date : 22/06/05 1. Title PR-01 ----
Press [MENU] to enter the HDD Media Browser
(or DVD Media Browser).
Time : 11/16
2. Title PR-02 ----
Length : 00:13 3. Title PR-03 ----
Quality : HQ
4. Title PR-04 ----
Move-…†œ
5.TitlePR-05----
DVD to HDD Dubbing
Use […†] to select HDD (DVD) Pictures, HDD
(DVD) Music or HDD (DVD) Divx, then press
[ENTER].
EOCRDING
Add
Dub : 0 Titl
1. Title PR-01 ----
Start Dubbing 2. Title PR-02 ----
3. Title PR-03 ----
4. Title PR-04 ----
5. Title PR-05 ----
DVD Space
Move-…
6. Title PR-06 ----
DVD to HDD Dubbing
HDD Media Browser
Add
HDD Pictures
HDD Music
HDD DivX
55 Pictures Files
Start Dubbing DVD to HDD Dubbing
This will dub 1 title(s)
TheTimeShiftBuffer willstop…†
Continue?
Yes
SETUP
Dub :1TitlesNo
DVD Browser
DVD Pictures
DVD Music
DVD DivX
55 Pictures Files
DVD Space : 99% 13 Titles
1/13 …†
Dubbing Completed
Select-ENTER DVD to HDD
Move-…†œ √
2
If you want to edit a folder including copy,
select the folder you want to edit using [
and press [EDIT].
…
†]
- Create Folder : Create folder where you want
- Delete Folder
4 7
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 48
mac001 1200DPI 100LPI
Me d ia file s Co p y in g
- Copy Folder : Copy folders including all files in
the folder.
- Open : Open the media and folder you want to
copy to.
- Rename Folder
- Copy Here : Copy to the media immediately
after confirmation message.
- Create folder : Create folder in the media you
want to copy to.
HDD Music
Create Folder
Delete Folder
Copy Folder
Rename Folder
DVIX/
1/
MU/
6
After selecting the destina tion to be copied, select
'Copy here' a nd press [ENTER].
02_LIVIN ON PRAYER.MP3
Select 'YES' and press [ENTER] to confirm, the
Copy process will be started.
Select the title you w a nt to copy using […†]. Then
select 'Edit‘ using […†] a nd press [ENTER].
HDD Music
Copy Completed
Play
DVIX/
View Info
Edit
1/
MU/
Whole copy process is displayed with a
percent unit on the upper right corner.
02_LIVIN ON PRAYER.MP3
HDD Music
Delete
Copy
Create Folder
DVIX/
1/
MU/
4572 MB Free
02_LIVIN ON PRAYER.MP3
Move-…†œ √ Selec
If you press [DISPLAY] button, progress bar per
each file (or folder) is displayd on the lower
part.
3
Select 'Copy‘ using […†] a nd press [ENTER]. Or
just press [DUB].
Using the same procedure as Dubbing, repeat
the process; select the titles using […†] and
press [ADD], you can add as many titles you
want. ‘Media Copy’ will appear.
•
•
DivX copy works only in Divx model.
To format a DVD±RW disc that contains
media files (mp3, jpg, DivX), press [SETUP] to
return to DVD-EE MODE. Press [REC] and then
[YES] to confirm, the disc format will be
started.
When the copy process is completed the tray
will open automatically.
HDD Media (Picture,Music,DivX) capacity is
limited to 10% of HDD. (Approx. 16GB for
160GB Model, 25GB for 250GB Model)
4
5
Select 'Done' a nd press [ENTER] a fter selecting a ll
the titles you w a nt to copy, a nd then 'Media
Copy - Select Destina tion' a ppea rs.
Select the m edia you w a nt to copy to a nd press
[ENTER].
•
•
HDD Media Copy
Remove
Done
DVIX/
1/
MU/
02_LIVIN ON PRAYER.MP3
Copy : 1 files
7MB
HDD Media Copy - Select Destination
Open
HDD
Copy Here
Create Folder
DVD
4572 MB Free
Move-…†œ √ Select
Copy : 1 files
2B
4 8
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 49
mac001 1200DPI 100LPI
HDD Pla y b a ck a n d Ed itin g
HDD Pla y b a ck a n d Ed itin g
This section ex pla ins va rious functions of HDD editing.
Or press [PLAY/PAUSE] to play the title.
At first, go to ‘HDD Videos’ m ode.
6
To stop playback at any time, press [STOP].
Then it will return to media browser.
1
Press [HDD] to select HDD
mode.
7
To leave the media browser mode, press
[SETUP].
HDD Selected
Actions are now for
HDD
Still Picture a nd Fra m e-by-Fra m e Pla yba ck ,
Fa st Forw a rd/ Ba ck w a rd, Slow Motion,
Zoom , A-B, Sea rch , Selecting Titles
Same with ‘DVD Playback’. (Fast rewind : x4, x8,
x16, x32)
√ Live
2
3
Press [MENU] to enter the
media browser.
While ‘HDD Videos‘ is selected, press [ENTER]
to go to the ‘HDD Videos’ page.
Repea t
While playing the HDD, each press of the [REPEAT]
button changes the repeat mode as follows:
Chapter ➝ Title ➝ Disc ➝ off ➝ Chapter ...
Media Browser
HDD Videos
HDD Media
DVD
Multimedia files
HDD Videos
De le tin g a HDD title
Date : 22/06/05 1. Title PR-01 ----
Time : 11/16 2. Title PR-02 ----
Length : 00:13 3. Title PR-03 ----
Follow these instructions to delete a title from the
Title List.
Quality : HQ
4. Title PR-04 ----
Move-
5. Title PR-05 ----
6. Title PR-06 ----
7. Title PR-06 ----
8. Title PR-06 ----
9. Title PR-06 ----
10. Title PR-06 ----
4
5
6
7
Select the title to be erased using [ENTER].
Then select ‘Delete‘ using [… †].
Press [ENTER] to erase the title.
Free Space : 99% 13 Titles
1/13 …†
EOCRDING
Move-…† Select-ENTER Back-MENU Exit-SETUP
Select 'Yes' and press [ENTER] to confirm.
HDD Videos
Play
1. Title PR-01 ----
2. Title PR-02 ----
3. Title PR-03 ----
4. Title PR-04 ----
5. Title PR-05 ----
6. Title PR-06 ----
Pla y in g a HDD title
Delete
Edit
Sort
Follow these instructions to play back a scene from
the Title List.
Dubbing
HDD Videos
4
5
Select the title to playback using [ENTER].
1. Title PR-01 ----
2. Title PR-02 ----
Play
ETDING
Delete
Edit
3. Title PR-03 ----
Then select ‘Play‘ using [… †]. Press [ENTER]
to play the title.
Sort
4. Title PR-04 ----
Free Spa
Move-…Dubbing
5. Title PR-05 ----
6. Title PR-06 ----
7. Title PR-06 ----
HDD Videos
HDD Videos
Play
1. Title PR-01 ----
2. Title PR-02 ----
3. Title PR-03 ----
4. Title PR-04 ----
5. Title PR-05 ----
6. Title PR-06 ----
7. Title PR-06 ----
8. Title PR-06 ----
9. Title PR-06 ----
10. Title PR-06 ----
Play
Delete
Edit
Delete
Delete Title
Free Spa
Edit
Sort
Are you sure you want to delete?
Sort
Dubbing
Move-…Dubbing
YES
NO
Free Space : 99% 13 Titles
1/13 …†
Free Space : 99% 13 Titles
1/13 …†
Move-…† Select-ENTER Back-MENU
Move-…† Select-ENTER Back-MENU
4 9
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 50
mac001 1200DPI 100LPI
HDD Pla y b a ck a n d Ed itin g
Ed itin g a HDD title
4
5
6
7
8
9
Select the title to be locked using [ENTER].
Select ‘Edit’ using [… †] .
Rena m ing (La beling) a Title
Follow these instructions to rename a title list
name,i.e., to edit the title of a recorded program.
Press [ENTER] to go to submenu.
Select ‘Parental Lock’ using [… †] .
Press [ENTER] to lock the title.
4
5
6
7
8
9
Select the title to be labeled using [ENTER].
Select ‘Edit’ using [… †] .
If you enter the password, the title is locked.
Press [ENTER] to go to submenu.
Select ‘Name’ using [… †] .
1 0 Lock icon ‘ ’ will appear in front of Title name.
1 1 To ‘Unlock’ the title, select ‘Unlock’ in step 7.
Press [ENTER] to change the title name.
The Keyboard Menu will be displayed. Use [
√…†] to select a character or function and
press [ENTER].
œ
HDD Videos
Name
Parental Lock 2. Title PR-02 ----
Unprotect
Video Edit
1. Title PR-01 ----
3. Title PR-03 ----
4. Title PR-04 ----
5. Title PR-05 ----
6. Title PR-06 ----
7. Title PR-06 ----
8. Title PR-06 ----
CLR : Clear the title name / SP : Space / DEL :
Delete a character / SAVE : Save the title name
1 0 After the new title name is complete, select
HDD Videos
‘SAVE’ and press [ENTER].
Date : 22/06/05 1. Title PR-01 ----
Time : 11/16
2. Title PR-02 ----
Free Spac
Length : 00:13 3. Title PR-03 ----
Move-…†
Quality : HQ
4. Title PR-04 ----
HDD Videos
5. Title PR-05 ----
6. Title PR-06 ----
7. Title PR-06 ----
8. Title PR-06 ----
9. Title PR-06 ----
10. Title PR-06 ----
Play
1. Title PR-01 ----
2. Title PR-02 ----
3. Title PR-03 ----
4. Title PR-04 ----
5. Title PR-05 ----
6. Title PR-06 ----
Delete
Edit
Sort
Dubbing
Free Space : 99% 13 Titles
1/13 …†
HDD Videos
Name
1. Title PR-01 ----
Move-…† Select-ENTER Back-MENU
Parental Lock 2. Title PR-02 ----
Unprotect
Video Edit
3. Title PR-03 ----
4. Title PR-04 ----
Free Spac
5. Title PR-05 ----
Move-…†
6. Title PR-06 ----
. -
HDD Videos
Name Title PR-01 ----
Parental Lock
Unprotect CLR SP DEL SAVE
Free Space
Protecting a Title
Video Edit 1 2 3 4 5 6 7 8 9 0
A B C D E F G H I
J
If you want to protect a title from accidental
recording, editing, or erasing, you can protect the
title. Later, if you change your mind, you can
unprotect the title.
Move-…†
K L M N O P Q R S T
U V W X Y Z (
: ; & !
)
.
,
Free Space : 99% 13 Titles
1/13 …†
4
5
6
7
8
9
Select the title to be protected using [ENTER].
Select ‘Edit’ using [… †] .
Move-…† Select-ENTER Back-MENU
Press [ENTER] to go to submenu.
Select ‘Protect’ using [… †] .
Pa renta l Lock
This menu will appear only when you set to 'On' in
'Setup - Preferences - Parental Controls - Set Hdd
Parental Lock' menu.
When you lock a program, the parental password
selected in the Setup menu will be used.
Press [ENTER] to protect the title.
Protect icon will appear at the back of Title
name.
1 0 To ‘Unprotect’ the title, select ‘Unprotect’ in
The user will be asked to Unlock the program before
Play or any Edit or Dubbing operation.
step 7.
5 0
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 51
mac001 1200DPI 100LPI
HDD Pla y b a ck a n d Ed itin g
•
Hide Cha pter :
HDD Videos
Name
1. Title PR-01 ----
Use to hide or unhide chapter markers in the
title. Depending on whether a chapter is
currently hidden or unhidden, one of the
following options will be available :
Hide : press [ENTER] to hide the current chapter
during playback.
Unhide : press [ENTER] to unhide the current
chapter during playback.
Note : You can use this feature to remove
commercials during playback by inserting chapter
markers at the start and end of a commercial
interruption and hiding the chapter created.
Parental Lock 2. Title PR-02 ----
Protect
3. Title PR-03 ----
4. Title PR-04 ----
Video Edit
HDD
V
i
d
e
o
s
Date : 22/06/05 1. Title PR-01 ----
Time : 11/16 2. Title PR-02 ----
Length : 00:13 3. Title PR-03 ----
Quality : HQ 4. Title PR-04 ----
5. Title PR-05 ----
6. Title PR-06 ----
Free Space :
7. Title PR-06 ----
Move-…† S
8. Title PR-06 ----
9. Title PR-06 ----
10. Title PR-06 ----
Free Space : 99% 13 Titles
1/13 …†
Move-…† Select-ENTER Back-MENU
•
•
Cha nge Index Picture :
Use to edit the title index picture. When
highlighted by pressing [ENTER], the image on
the screen is used as the new title index
picture.
Editing a Title
Split Title :
Use to divide the title into two separate titles.
When highlighted by pressing [ENTER], the
current title is divided into two separate titles
at the point where [ENTER] is pressed.
4
5
6
7
8
9
Select the title to be edited using [ENTER].
Select ‘Edit’ using [… †] .
Press [ENTER] to go to submenu.
Select ‘Video Edit’ using [… †] .
Press [ENTER] to go to HDD Edit menu.
The HDD Edit Menu will be displayed.
HDD Videos
Name
Parental Lock 2. Title PR-02 ----
Unprotect
Video Edit
1. Title PR-01 ----
3. Title PR-03 ----
4. Title PR-04 ----
5. Title PR-05 ----
6. Title PR-06 ----
•
•
•
Title :
HDD Edit
Press [ENTER] and select the title you want to
edit using [… †].
Title
1 of 2
Chapter
1 of 11
Edit Chapters
Free Space
Hide Chapter
Move-…†
Cha pter :
Change Index Picture
Split Title
Press [ENTER] and select the chapter you want
to edit using [… †].
Instructions:
Enter-Confirm Setup-Exit
Move …†
Edit Cha pters :
ETDING
Use to create, delete and edit chapter markers
in the title. Use the cursor button to choose one
of the following options :
Add : when highlighted, creates a new chapter
marker at the point in the title where [ENTER] is
pressed.
Delete : when highlighted and [ENTER] is
pressed, deletes the last chapter that was
created in the title.
Delete all : when highlighted and [ENTER] is
pressed, deletes all chapter markers within the
title.
•
Please note that any edits made will not be in
effect until [MENU] or [STOP] button is
pressed. During this time, the HDD/DVD
Recorder will update the title with the edits
made. Once the update is complete, the edits
will be available the next time the title edited
is played back.
Press [MENU] or [STOP] to exit from editing
menu.
You can enter into HDD Edit menu directly by
pressing [EDIT] button.
•
•
5 1
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 52
mac001 1200DPI 100LPI
HDD Pla y b a ck a n d Ed itin g
So r tin g a HDD title
Du b b in g a HDD title to DVD d isc
Follow these instructions to sort a title from the
Title List by varying the order.
Follow these instructions to copy the title(s)
selected with the same properties (title name,
duration, index picture, Lock, Chapter Mark)
information over to DVD.
4
5
6
7
8
Select the title to be sorted using [ENTER].
Then select ‘Sort‘ using [… †].
4
5
6
Select the title to be dubbed using [ENTER].
Press [ENTER] to go to submenu.
Then select ‘Dubbing‘ using [… †].
Select ‘Record Date’ using [… †] .
Press [ENTER] to sort the list by record date.
Record Date : sorts by record date.
Alphabetical : sorts by alphabetical order.
Press [ENTER] to go to ‘HDD to DVD Dubbing’
menu.
7
The ‘HDD to DVD Dubbing’ Menu will be
displayed. For more detailed information about
‘HDD to DVD Dubbing’ procedure, go to page
46.
Delete Order : sorts by record date and displays
protected titles at the end.
HDD Videos
Play
1. Title PR-01 ----
2. Title PR-02 ----
3. Title PR-03 ----
4. Title PR-04 ----
5. Title PR-05 ----
6. Title PR-06 ----
Protected : sorts by protected titles.
Delete
Edit
Sort
HDD Videos
Dubbing
Play
1. Title PR-01 ----
2. Title PR-02 ----
3. Title PR-03 ----
4. Title PR-04 ----
5. Title PR-05 ----
Delete
Edit
HDD to DVD Dubbing
Date : 22/06/05 1. Title PR-01 ----
Sort
Time : 11/16
2. Title PR-02 ----
Dubbing
HDD Videos
Length : 00:13 3. Title PR-03 ----
Free Space :
Quality : HQ
Move-…† S
4. Title PR-04 ----
Record Date
1. Title PR-01 ----
5. Title PR-05 ----
Alphabetical 2. Title PR-02 ----
6. Title PR-06 ----
Delete Order 3. Title PR-03 ----
Dub : 0 Titles
7. Title PR-06 ----
8. Title PR-06 ----
9. Title PR-06 ----
10. Title PR-06 ----
Protected
4. Title PR-04 ----
5. Title PR-05 ----
Free Space :
6. Title PR-06 ----
Move-…† S
7. Title PR-06 ----
8. Title PR-06 ----
9. Title PR-06 ----
10. Title PR-06 ----
Free Space : 99% 13 Titles
1/13 …†
Move-…† Select-ENTER Back-MENU
Free Space : 99% 13 Titles
1/13 …†
Move-…† Select-ENTER Back-MENU
5 2
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 53
mac001 1200DPI 100LPI
Disc Ma n a g e r
Disc Ma n a g e r
This section ex pla ins edit functions for the entire disc a nd for the titles in the disc.
At first, go to ‘Disc Menu’ m ode.
For recordable DVD media, such as DVD±R and
DVD±RW discs, you can manage the disc using the
Disc Menu.
The DVD±R Disc Menu allows you to rename your
disc or finalise it so it will be compatible with most
other DVD players.
1
2
Press [MENU] to go to ‘Disc Menu’ menu.
If you want to display ‘Title Edit’ menu, press
[√] in ‘Disc Menu’ menu. Go to ‘Title Editing’
on page 56~57.
3
4
If you want to display ‘Disc’ top menu, press
[…] in ‘Disc Menu’ menu. The Disc top Menu
shows you disc information, such as disc type,
number of recordings, total titles, free space,
etc.
The DVD±RW Disc Menu allows you to erase, lock,
or unlock your disc. You can also make it compatible
with most other DVD players.
If you want to display ‘Disc Edit’ menu, press
[√] ‘Disc’ top menu. Go to ‘Disc Editing’ on
page 53~55.
Disc Ed itin g in DVD±RW d isc
Press
[MENU]
then
At first, go to ‘Disc Edit’ m ode.
1
2
3
Press [MENU] to go to ‘Disc Menu’ menu.
Press […]. ‘Disc’ Top menu will be displayed.
Press [√]. ‘Disc Edit’ menu will be displayed.
…
1. TITLE
02/01/2004
03:24:48
HQ 00:03:21
√
†
2. TITLE
02/01/2004
03:24:48
Disc Inform a tion
Press
[√] then
SP 00:01:12
EMPTY TITLE
4
Use [œ/√] to select the ‘Information’ menu.
EMPTY
…
The Disc ‘Information’ Menu shows you disc
information, such as disc type, number of
recordings, total titles, free space, etc.
Step1] ‘Disc Menu’ menu
√
Play Title
Press [Enter] to begin
playback of title.
†
Press
[…] then
NTSC
MY DVD
EMPTY
Instructions:
Enter-Confirm
NTSC
Information
02/01/2004
√
DVD
√
Type
DVD+RW
5
DVD
EDIT
06:43:08
Step2] ‘Title Edit’ menu
Recordings
EDIT
Total Title 00:57:57
Free Space 01:48:48
Finalized
Locked
Compatible
†
Press
[√] then
†
-
No
Yes
Instructions:
Setup-Exit
EDTING
Step3] ‘Disc’ top menu
NTSC
Information
√
DVD
EDIT
Type
DVD+RW
5
Recordings
Total Title 00:57:57
Free Space 01:48:48
Finalized
Locked
Era se the disc (DVD±RW)
†
-
No
Compatible Yes
4
5
Use [œ/√] to select ‘Erase the disc’ menu.
Instructions:
Setup-Exit
If you want to erase the whole disc, press
[ENTER].
Step4] ‘Disc Edit’ menu
6
To confirm, select ‘Yes‘. To cancel, select ‘No‘.
If you select ‘Yes‘ and press [ENTER], all the
contents of the disc will be lost.
5 3
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 54
mac001 1200DPI 100LPI
Disc Ma n a g e r
Ma k e Com pa tible
'Make Compatible' for a DVD+RW will
automatically create a menu screen for navigating
the disc. This menu screen is accessible by pressing
[TITLE].
Erase the disc
Press [Enter] if you want
to erase the d
Erase the disc
existing recor
Erase the disc?
be cleared.
All recordings will be lost.
Yes
No
4
Use [œ/√] to select ‘Make Compatible‘ for
DVD+RW. Press [ENTER] as shown on the
screen.
Instructions:
Enter-Confirm
Instructions:
Enter-Confirm Move …†
5
Select 'Yes' using […] and press [ENTER] to
make the disc compatible.
DVD±R discs cannot be locked (unlocked) or
erased.
6
7
Press [ENTER] again.
Press [SETUP] to go to the top disc menu.
Lock / Unlock Disc (DVD±RW)
If you want to protect a disc from accidental
recording, editing, or erasing, you can lock the disc.
Later, if you change your mind, you can unlock the
disc.
Make Compatible
Press [Enter] to make any
previous title editing
compatible with your DVD
player.
4
Use [œ/√] to select
‘Lock/Unlock Disc’. Press
[ENTER] as shown on the
screen.
Make Compatible
Make disc compatible with
your DVD player.
Lock/Unlock Disc
Instructions:
Yes
Press [Enter] to lock the
disc. This prevents future
disc operations or
recordings.
Enter-Confirm
No
Make Compatible
Finished.
This Disc should already
be compatible.
5
You can see the current
disc status (Locked or
Unlocked).
Instructions:
ok
Enter-Confirm M
Instructions:
Enter-Confirm
Instructions:
Enter-Confirm Move …†
6
7
You can change the disc status by selecting
‘Yes‘ and pressing [ENTER]. The ‘Changing Disc
Status’ bar will appear. This process takes a
few seconds.
•
‘Make Compatible’ can take up to 3-4 minutes
depending on the type of disc, how much is
recorded on the disc, and the number of titles
on the disc.
If you do not make your DVD+RW disc
compatible, your edits will not be recognized
by other DVD players.
It may take over 7 minutes for finalizing the
edited disk, you must wait till the set finishes
the finalizing operation.
After the process
Lock/Unlock Disc
is finished the
menu disappears
automatically.
Disc is unlocked.
•
•
Do you want to lock it?
Yes
No
Lock/Unlock Disc
Changing disc lock status.
Instructio
Please wait a moment....
Enter-Co
5 4
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 55
mac001 1200DPI 100LPI
Disc Ma n a g e r
Disc Ed itin g in DVD±R, DVD-RW d isc
Fina lise
Finalising a DVD±R (or DVD-RW) ‘locks’ its
recordings in place so the disc can be played on
most standard DVD players or computers equipped
with DVD-ROM drives.
Cha nge Disc Na m e
You can rename your disc to any name you choose.
The default disc name is ‘MY DVD‘.
4
Use [œ/√] to select ‘Change Disc Name‘. Press
[ENTER] as shown on the screen.
5
6
The Keyboard Menu appears.
4
Use [œ/√] to select ‘Finalise Disc‘ for a DVD±R
(or DVD-RW). Press [ENTER] as shown on the
screen.
Use [œ √…†] to select and press [ENTER] to
enter the name of the disc.
5
Select 'Yes' using […] and press [ENTER] to
finalise the disc.
CLR : Clear the disc name / SP : Space / DEL :
Delete a character / SAVE : Save the disc name
6
7
Press [ENTER] again.
7
8
Press [ENTER] again.
Press [SETUP] to go to the top disc menu.
To save the name of the disc, select ‘SAVE‘ and
press [ENTER].
Once you have finalised a DVD±R (or DVD-RW) disc,
you cannot edit or record anything else on that disc.
If ‘Lock Disc’ is set to ‘On’ in the DISC Settings
menu, you cannot rename your disc; see page 54.
Finalise Disc
Finalise Disc
Press [Enter] if you want to
finalise the disc.
No changes can be made
afterwards. Continue?
Change Disc Name
Press [Enter] to change
the disc name.
Yes
No
Change Disc Name
MY DVD
Instructions:
Enter-Confirm
Instructions:
Enter-Confirm Move …†
CLR SP DEL SAVE
Change Disc Name
1 2 3 4 5 6 7 8 9
A B C D E F G H I
Problem.
Instructions:
Enter-Confirm
K LM N O P Q R S
This disc is locked. It
U VW X Y Z (
; &
)
.
cannot be renamed.
ok
:
Enter-Confirm Move …†
Instructions:
Enter-Confirm Move …†
ETDING
5 5
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 56
mac001 1200DPI 100LPI
Disc Ma n a g e r
Title Ed itin g
Cha nge Na m e
To change the name of a title:
You can manage the titles on your DVD±R/±RW
discs using the Title menu.
4
5
6
Select ‘Change Name’ using [œ √] .
Press [ENTER] to change the title name.
The Keyboard Menu will be displayed. Use [
√…†] to select a character or function and
press [ENTER].
At first, go to ‘Title Edit’ m ode.
1
2
Press [MENU] to go to ‘Disc Menu’ menu.
œ
Select the desired title you want to manage
using […†].
3
Press [√]. ‘Title Edit’ menu will be displayed.
CLR : Clear the whole title. / SP : Add a space /
DEL : Delete a character / SAVE : Save the title
name
Pla y a Title
To play a title:
7
After the new title name is complete, select
‘SAVE’ and press [ENTER].
4
5
Select ‘Play Title' using [œ √] .
Press [ENTER] to play the title.
Change Name
Press [Enter] to change
the title name.
Change Name
TITLE
…
Large arrow
pointing to
CLR SP DEL SAVE
1 2 3 4 5 6 7 8 9 0
A B C D E F G H I J
K LM N O P Q R S T
√
disc menu or
next page is
only visible
for a moment
when […/†]
is pressed.
Play Title
Press [Enter] to begin
playback of title.
†
U VW X Y Z (
; &
)
.
,
:
Instructions:
Enter-Confirm
Enter-Confirm Move …†
EMPTY
Instructions:
Enter-Confirm
Era se a Title
4
5
6
Select ‘Erase Title‘ using [œ √].
Press [ENTER] to erase the title.
Select 'Yes' and press [ENTER] to confirm. The
Erase Title progress bar will be displayed. This
may takes several seconds.
7
After erasing is complete, the erased title
remains as an empty title.
You can erase titles on DVD±RW discs only.
Erase Title
Press [Enter] to er
this title.
Erase Title
Erase Title
Would you like to Era
the title?
Yes
No
Title is being erased.
Please wait a moment...
Instructions:
Enter-Confirm
Instructions:
Enter-Confirm Move …
5 6
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 57
mac001 1200DPI 100LPI
Disc Ma n a g e r
Ad va n ce d Disc Ed itin g
Record Option
To set DVD±R and DVD±RW recording options:
When you insert a DVD±R or DVD±RW disc already
recorded by your HDD/DVD Recorder, you can edit
the titles and chapters in a variety of ways.
4
Select ‘Record Options’ using [œ √] and press
[ENTER].
At first, go to ‘DVD Edit’ m ode.
5
Select your preferred record options for each
disc type:
1
2
Press [MENU] to go to ‘Disc Menu’ menu.
Select the recorded title you want to edit using
[…†].
For DVD±R
The last recorded title :
Allows you to append your new recording to
the end of your last recording, or record it as a
new title.
3
Press [EDIT]. ‘DVD Edit’ menu will be displayed.
…
1. TITLE
02/01/2004
√
Others :
03:24:48
HQ 00:03:21
Allows you to record your new title until the
end of the disc.
†
2. TITLE
02/01/2004
03:24:48
For DVD±RW
SP 00:01:12
EMPTY TITLE
EMPTY
The last blank title :
Allows you to record your new title until the
end of the disc.
The last recorded title :
Allows you to record over your last recorded
title and then stop.
Allows you to record over your last recorded
title and continue recording until the end of the
disc.
Allows you to append your new recording to
the end of your last recording. (option)
Others :
Allows you to record over the title and then
stop.
Allows you to record over the title and continue
recording until the end of the disc.
Titles a nd Cha pters
When you insert a DVD±R or DVD±RW disc already
recorded by your HDD/DVD Recorder, all titles
recorded on the disc appear on your screen. If a
selected title has chapters, you can skip to the next
or previous chapter by pressing [NEXT] or [PREV].
You can also see how many chapters are in a title
by pressing [DISPLAY] during playback.
Title
DVD Edit
To select a specific title:
Title
1 of 2
Chapter
1 of 11
1
2
3
Use […†] to select
‘Title‘.
Select Title
…
Edit Chapte
Hide Chapt
1 of 2
†
Change Ind
Split Title
Press [ENTER] to display
the submenu.
Instructions:
Enter-Confirm Setup-Exit
Move …†
EDTING
Record Options
Record Options
You can choose
Press [Enter] to select
a method for overwriting
this title.
Overwrite then stop
Overwrite and continue
(Append to existing)
Use […†] to select the
desired title number and then press [ENTER].
Cha pter
Instructions:
Enter-Confirm Move …†
Instructions:
Enter-Confirm
To select a specific chapter:
DVD Edit
1
2
3
Use […†] to select
‘Chapter‘.
Title
1 of 2
1 of 11
Chapter
Edit Chapters
As overwriting function may take several minutes to
finish and save recording, we recommend to delete
the title and record function.
Hide Cha
Select Chapter
…
Press [ENTER] to display
the submenu.
Change In
1 of 11
†
Split Title
Instructions:
Enter-Confirm Setup-Exit
Move …†
Use […†] to select the
5 7
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 58
mac001 1200DPI 100LPI
Disc Ma n a g e r
desired chapter number and then press
[ENTER].
Split Title
This feature allows you to split a title into two
titles.
Edit Cha pters
You can add a chapter marker anywhere in a title
during playback.
Once the chapter is marked, you can use the
chapter search feature as described above.
You can add/delete chapter markers or delete all
chapter markers in a title.
1
2
3
Use […†] to select 'Split
Title'.
DVD Edit
Title
1 of 2
Press [ENTER] to display
the submenu.
Chapter
1 of 11
Edit Chapters
Hide Chapter
Change Index Picture
Split Title
Use […†] to select 'Yes'
if you prefer to split the
title.
Instructions:
Enter-Confirm Setup-Exit
Move …†
DVD Edit
1
2
3
Use […†] to select ‘Edit
Chapters‘.
Title
1 of 2
1 of 11
4
Press [ENTER] at the
point where you want to divide the
title into two separate titles
Chapter
Split the title
in two?
Yes
Edit Chapters
Hide Chapter
Press [ENTER] to display
the submenu.
Change Ind
Choose the edit
Split Title
No
Function
Instructions
Add
Use […†] to select one
of the various chapter
marker functions (Add,
Delete, or Delete All).
Enter-Conf
Delete
Split Title
Splitting title into 2 titles.
Move …†
Delete All
Please wait a moment....
Instructions:
Setup-Exit
4
Press [ENTER] to confirm.
Hide Cha pters
•
•
Split Title may take several minutes.
This feature allows you to
hide or unhide a chapter.
After hiding a chapter, the
chapter is not deleted but
only hidden. If a chapter is
hidden then it shows ‘Unhide
Chapter‘ and vice versa.
DVD Edit
After editing is complete, a DVD-RW,DVD±R
disc will not be compatible with other DVD
players until you make the disc compatible; see
page 54~55.
Title
1 of 2
1 of 11
Chapter
Edit Chapters
Hide Chapter
Change Index Picture
Split Title
Instructions:
Enter-Confirm Setup-Exit
Move …†
Cha nge Index Picture
Each title displayed in the Playlist menu is
represented by a thumbnail picture taken from the
start of that title or chapter. If you prefer, you can
select a different still picture from within the title.
1
2
3
Use […†] to select
‘Change Index Picture‘.
DVD Edit
Title
1 of 2
Chapter
1 of 11
Edit Chapters
Hide Chapter
Press [ENTER] to display
the submenu.
Change Index Picture
Split Title
Use […†] to select ‘Yes‘
if you prefer to change the
picture.
Instructions:
Enter-Confirm
Move …†
Change Picture
Are you sure?
Yes
No
4
Press [ENTER] when the preferred picture is on
your TV screen.
5 8
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 59
mac001 1200DPI 100LPI
Tro u b le sh o o tin g
Tro u b le sh o o tin g
Check the following guide for the possible cause of a problem before contacting customer support.
Sym ptom
Ca use
Solution
No power.
The power cord is disconnected.
Plug the power cord into the wall outlet
securely.
No picture.
No sound.
The TV is not set to receive HDD/DVD Select the appropriate video input on the
Recorder signal output.
TV so the picture from the HDD/DVD
Recorder appears on the TV screen.
Connect the video cable securely.
The video cable is not connected
securely.
The TV power is turned off.
The equipment connected with the
audio cable is not set to receive
HDD/DVD Recorder signal output.
The audio cables are not connected
securely.
Turn on the TV.
Select the correct input mode on the audio
receiver so you can listen to the sound
from the HDD/DVD Recorder.
Connect the audio cables securely.
The power on the equipment
connected with the audio cable is
turned off.
Turn on the equipment connected with the
audio cable.
The audio cables are damaged.
Replace with new ones.
Playback picture is poor. The disc is dirty.
HDD/DVD Recorder does No disc is inserted.
not start playback.
Clean the disc.
Insert a disc. (Check that the disc
indicator on the front panel display is lit.)
Insert a playable disc. (Check the disc
type, colour system, and regional code.)
Place the disc with the playback side
down.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the
guide.
Place the disc on the disc tray correctly
inside the guide.
The disc is dirty.
Clean the disc.
The Parental Control level is set.
Cancel the Parental Control function or
change the rating level.
Picture from external
input is distorted.
The video signal from the external
component is copy-protected.
You cannot connect via the HDD/DVD
Recorder. Connect the component
directly to your TV.
Some channels are skipped The skipped channels were deleted
Use the ‘Adjust Channels’ feature to
restore channels.
Tighten connections or replace cable.
over when using [PR+/–].
Picture or sound of
with the ‘Adjust Channels’ feature.
Antenna or cables are loose.
broadcasting channel is Wrong Tuning Band is selected in the Try all ‘Auto Set‘ options; see page 21 for
ETDING
weak or missing.
Camcorder image not
shown.
HDD/DVD Recorder Setup menu.
Camcorder is off.
details.
Turn camcorder on and operate properly.
Camcorder image via A/V The HDD/DVD Recorder’s source is
Use [INPUT] to select AV input channel
(AV, AVF or DV).
input to HDD/DVD
Recorder is not shown on
TV screen.
not set to AV, AVF or DV.
The disc was not finalised (or not made
Can’t play disc recorded compatible if using a DVD+RW).
on this HDD/DVD Some players will not play even a
Recorder on another DVD finalised disc.
player. Discs recorded with copy-once
Finalise the disc; see page 55.
No solution.
FNRCE
material cannot be played on other
players.
No solution.
5 9
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 60
mac001 1200DPI 100LPI
Tro u b le sh o o tin g
Sym ptom
Ca use
Solution
Cannot record or did not The remaining blank space on the
Use another disc.
record successfully.
disc is insufficient.
The source you are trying to record is You cannot record the source.
copy-protected.
When setting the recording channel, Select the channel on the HDD/DVD
the channel is tuned on your TV’s
tuner.
Recorder’s built-in TV tuner.
Timer Recording not
possible.
Clock in HDD/DVD Recorder is not set Set clock to correct time. See ‘Set Clock‘
to correct time.
on page 21.
Timer has been programmed
incorrectly.
Reprogram Timer. See ‘Timer Recording‘
on page 42~44.
TIMER indicator light does not appear Reprogram Timer.
after programming timer.
Stereo Audio Record
and/or Playback not
present.
TV is not Stereo-compatible.
Broadcast program is not in stereo
format.
No solution.
No solution.
HDD/DVD Recorder A/V Out jacks are Make A/V connections. Stereo is available
not connected to TV A/V In jacks.
only via A/V output from HDD/DVD
Recorder.
HDD/DVD Recorder Audio/Video Out is Select AUX or A/V source as TV input.
not selected for viewing at the TV.
HDD/DVD Recorder’s TV audio
channel is set to BIL or MONO.
The remote control is not pointed at
Set TV audio channel mode to Stereo.
See ‘Changing the TV Audio Channel‘ on
page 33.
Remote control does not the remote sensor of the HDD/DVD
Point the remote control at the remote
sensor of the HDD/DVD Recorder.
work properly.
Recorder.
The remote control is too far from the
HDD/DVD Recorder.
Operate the remote control within 23 ft
There is an obstacle in the path of the (7m).
remote control and the HDD/DVD
Remove the obstacle.
Recorder.
The batteries in the remote control are
dead.
Replace the batteries.
RESET : If the set is in malfunctions, press [DVD/HDD] key on the front panel for 5 seconds or unplug the power cord,
and then plug it in after 5 seconds. As this set is a Digital Multimedia Product, malfunction may occur.
Mo istu re Co n d e n sa tio n
Moisture condensa tion ca n occur:
In loca tions w here m oisture condensa tion m a y occur:
When the HDD/DVD Recorder is moved from a cold Keep the HDD/DVD Recorder plugged into an AC
place to a warm place.
power outlet with the power on. This will help
prevent condensation.
Under extremely humid conditions.
When condensation has occurred, wait a few hours
for the HDD/DVD Recorder to dry before using it.
6 0
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 61
mac001 1200DPI 100LPI
Te ch n ica l Sp e cifica tio n s
Te ch n ica l Sp e cifica tio n s
Genera l
Resolution
Over 500 lines (HQ Recording)
Power requirements 200–240V~, 50/60 Hz
Power consumption 40W
Dimensions(approx.) 435 x 55 x 343 mm (w x h x d)
Inputs
Antenna In/Out
Video In
Audio In
U/V-mixed; 75 Ω unbalanced
1.0 Vp-p, unbalanced
-8.8 dBm
4pin (i.LINK/IEEE 1394
standard)
Mass (approx.)
Operating temperature
Net : 4.3kg Gross : 5.6kg
41°F to 95°F (5°C to 35°C)
DV IN
Operating humidity 5% to 90%
Signal system
PAL Colour
Outputs
Video output
Recording
Recording formats
Video output terminal, 1.0 Vp-p,
unbalanced, RGB output (75Ω
in load, R : 0.7Vp-p, G : 0.7Vp-p,
B : 0.7Vp-p)
Audio output terminal (2
kinds), 2Vrms (DVD) Analog
audio output : 2.0Vrms,
Digital audio output : coaxial,
optical
DVD Video Recording, DVD-
VIDEO
DVD±R, DVD±RW
Recordable discs
Recordable time
[DVD] (Approx.) 1 hour (HQ
mode), 2 hours (SP mode), 4
hours (EP mode), 6 hours (SLP
mode)
[HDD] (Approx.) 51 hours (HQ
mode), 105 hours (SP mode),
204 hours (EP mode), 310 hours
(SLP mode)
Audio output
S-Video output
1.0Vp-p, 75Ω unbalanced,
Mini DIN 4-pin x 1, C :
0.286Vp-p, 75Ω
Video recording form a t
Component Video output/Progressive Scan
(Y) 1.0Vp-p, 75 Ohm, negative
Sampling frequency 27MHz
Compression format MPEG 2
Audio recording form a t
sync, RCA jack X 1, (Pb)/(Pr)
0.7Vp-p, 75 ohm , RCA jack X2
Sampling frequency 48kHz
Compression format MPEG1 Layer2
Accessories
HDD Specifica tions
RF cable ...................................................................... 1
Blank DVD+RW disc .................................................. 1
Remote control .......................................................... 1
Batteries ..................................................................... 2
Capacity
RPM
250GB (1 platter)
7200 RPM
Start Time
Stop time
8 sec (15 sec max )
12 sec ( 20 sec max )
Design and specifications are subject to change
without notice.
HDD Recording Capacity (250GB) (Approx.)
HQ : 9.5 Mbps, 51Hr, SP : 5.1
Mbps, 105Hr, EP : 2.5 Mbps,
204Hr, SLP : 1.7 Mbps, 310Hr
Audio Frequency range20Hz to 20 KHz
Video S/N
Audio S/N
Resolution
Over 50 dB
Over 65 dB
Over 500 lines (HQ Recording)
DVD Specifica tions
FNRCE
Frequency response DVD (PCM 48 kHz): 8 Hz to 22
kHz, CD: 8 Hz to 20 kHz
Manufactured under license from Dolby
Laboratories. ‘Dolby‘ and the double-D symbol
are registered trademarks of Dolby Laboratories.
Video S/N
Audio S/N
More than 60 dB
More than 90 dB
DTS and DTS Digital Out are registered
trademarks of Digital Theater Systems, Inc.
Harmonic distortion Less than 0.04%
Dynamic range More than 90 dB
6 1
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 62
mac001 1200DPI 100LPI
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘
` 63
mac001 1200DPI 100LPI
|