COMBINATION INSTALLATIONS
Revised 09/28/09 Page 1/1
PLANNING
GUIDE
Document # PGCI - 014
Slide-In Cooktop/Warming Drawers
(Side-by-Side)
All tolerances: +1/16”, -0, (+1.6 mm, -0) unless otherwise stated
WArNING
•
•
Observe all governing codes and ordinances during
planning and installation. Contact your local building
department for further information.
All appliances must be installed in accordance with the
accompanying installation instructions.
7 3/4” (197 mm)
Slide-in gas cooktop
Cooktop platform
1, 2
1” (25 mm) Min. thickness3, 5
1, 2
Warming drawer
Warming drawer
3, 5
36"
(914 mm)
3/4” (19 mm)
A
A
B
C
DRT/EG SERIES COOkTOP WITh SIDDRAWERS
inimum
(A) Cabinet Cutout
Width
(B)
Dacor Models
h to Adjacent
(D) Cutout Height
Door/Drawers3, 5
IWD24
EWD24
22 1/2” (572 mm
22 5/8” (57
)
48 1/2” (1232 mm)
48 3/4” (1238 mm)
9 1/8” (232 mm)
OWD24
11 15/16” (303 mm)
NOTES:
1.
24” (610 mm) minimum interior cabinet depth
(20 1/8" for model OWD24).
2.
3.
3/4” (19 mm) support platform (flush with cutout).
Spacing may vary for warming drawers with a
custom front panel. See warming drawer installation
instructions for further details.
4.
5.
See individual appliance planning guide pages for
overlay dimensions.
Spacing between appliances and doors/drawers
is minimum required to allow for ventilation and to
prevent scraping. Additional space may be required for
appearance.
Phone: (800) 793-0093
Specifications are subject to change without notice.
See installation instructions for additional details.
CI.18
|