CT1503/CT1702
User Guide
Revision: 1-A
23 January 2002
Ge ne ra l Inform a tion
Pa rts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Fig ure 1: Inve nto ry o f Pa rts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Com p one nt Inform a tion
Fig ure 2: C T1503 Co nne c tio n Lo c a tio ns (Ba c k-Vie w o f the Mo nito r) . . . . . . . . . . . . . . 10
Fig ure 3: C T1702 Co nne c tio n Lo c a tio ns (Ba c k-Vie w o f the Mo nito r) . . . . . . . . . . . . . . 11
Fig ure 4: C T1503/T1702: Fro nt o f the Mo nito r . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mo nito r Ite m De finitio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Ad justing the Tilt (o r Vie wing Ang le ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Po we r Ma na g e m e nt Func tio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Fig ure 5: Re m o te C o ntro l De vic e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Re m o te Co ntro l Ite m De finitio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Conne c ting
CO NNEC TING: Yo ur Monito r to Yo ur C om p ute r . . . . . . . . . . . . . . . . . . 17
Fig ure 6: Mo nito r-to -C o m p ute r Co nne c tio n Dia g ra m . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Fig ure 7: Tune r (TV/ C ATV)-to -Mo nito r C o nne c tio n Dia g ra m . . . . . . . . . . . . . . . . . . . . . 22
Fig ure 8: Mo nito r-to -Exte rna l A/V De vic e s Co nne c tio n Dia g ra m . . . . . . . . . . . . . . . . . 25
Config uring / Ad justing
CO NFIG URING & ADJUSTING the Disp la y: PC (ANALOG ) Mod e . . . . . 26
Initia l Se t-Up & Ad justm e nt o f the Mo nito r . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Exp la na tio n o f Re m a ining Me nu Ite m s: PC (ANALO G) Mo d e . . . . . . . . . . . . . . . . . . . . 31
CO NFIG URING & ADJUSTING the Disp la y: TV/ C ATV (TUNER) Mo d e . . 34
Initia l Se t-Up & Ad justm e nt o f the Mo nito r . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3
Exp la na tio n o f Re m a ining Me nu Ite m s: TV/ C ATV (TUNER) & S-VIDEO Mo d e s . . . . . . . 37
CO NFIG URING & ADJUSTING the Disp la y: Exte rna l De vic e s (S-VIDEO)
Mo d e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Initia l Se t-Up & Ad justm e nt o f the Mo nito r . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Exp la na tio n o f Re m a ining Me nu Ite m s: TV/ C ATV (TUNER) & S-VIDEO Mo d e s . . . . . . . 37
Troub le shooting
Ap p e nd ix
APPENDIX: Wa rra nty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
APPENDIX: C T1503 Ana log Disp la y Mo d e s (Ana lo g ) . . . . . . . . . . . . . . 47
APPENDIX: C T1702 Disp la y Mod e s (Ana lo g ) . . . . . . . . . . . . . . . . . . . . . 48
APPENDIX: C T1703 Disp la y Mod e s (Dig ita l) . . . . . . . . . . . . . . . . . . . . . . 49
4
G ENERAL INFO RMATIO N: G e ne ra l Sa fe ty Pre c a utions
GENERAL INFORMATION: Ge ne ra l Sa fe ty Pre c a utions
This Mo nitor ha s b e e n e ng ine e re d a nd m a nufa c ture d to a ssure yo ur
sa fe ty.
To a vo id e le c tric a l sho c k a nd to p re ve nt o the r injurie s o r
d a m a g e , p le a se re a d this Ma nua l a nd c om p ly with the sta te d
wa rning s a nd p ro c e d ure s.
Fore ig n & Ma g ne tic Ob je c ts
• Do no t p la c e a nything he a vy, we t o r
m a g ne tic o n the Mo nito r o r Po we r Co rd .
• Do no t c o ve r the ve ntila tio n o p e ning s o r
to uc h the m with m e ta llic o r fla m m a b le
m a te ria l.
Te m p e ra ture
• Extre m e te m p e ra ture m a y c a use
d isc o lora tio n or d a m a g e s.
• Avo id o p e ra ting the Mo nito r in e xtre m e he a t,
hum id ity, o r d usty a re a s.
• Am b ie nt Te m p e ra ture : 0°C– 40°C
Cle a ning the LCD Surfa c e
• To p re ve nt a ny d a m a g e to the LC D surfa c e :
• DO NO T use so lve nts, (suc h a s b e nze ne ).
• Inste a d, use a d a m p so ft c lo th.
5
GENERAL INFORMATION: Ge ne ra l Sa fe ty Pre c a utio ns
Prop e r Tools
• To p re ve nt a ny sc ra tc he s to the LC D surfa c e ,
DO NO T use sm a ll to o ls (suc h a s a p in o r a
p e nc il) ne a r the Mo nito r.
Fla t, Sturd y Surfa c e
• Pla c e the Mo nito r o n a sturd y, fla t surfa c e to
p re ve nt it fro m fa lling .
Exte rna l Shoc ks
• DO NO T hit, d ro p , o r othe rwise a p p ly a ny
m e c ha nic a l o r p hysic a l sho c ks to the Monito r.
Ve ntila tion
• Insta ll the Mo nito r in a we ll-ve ntila te d a re a .
• NO TE: Be sure the ve ntila tio n is no t so stro ng
tha t b lo ws o ve r the Mo nito r.
Powe r Off
• Turn the Mo nitor O FF b e fo re c o nne c ting it to
the p o we r o utle t o r surg e p ro te c to r.
• Also, while insta lling yo ur Mo nito r, it is wise to
unp lug yo ur C o m p ute r a nd othe r
c o m p o ne nts from the p o we r o utle t.
6
G ENERAL INFO RMATIO N: G e ne ra l Sa fe ty Pre c a utions
Se c ure Conne c tions
• Ma ke sure tha t the Mo nitor’s Po we r Co rd a nd
the othe r d e vic e s’ p o we r c o rd s a re p rop e rly
c o nne c te d .
Othe r Ele c tric a l Sa fe ty Note s
• O ve rlo a d ing AC o utle ts a nd e xte nsio n c o rd s
a re d a ng e ro us.
• Also, fra ye d Po we r Co rd s a nd the b ro ke n
p lug s m a y c a use e le c tric sho c k o r fire .
Do Not Ope n the Monitor
• The re a re no use r-se rvic e a b le c o m p o ne nts
insid e .
• The re is a risk o f e xp osure to hig h-vo lta g e
e le c tric ity insid e , e ve n whe n p o we r is turne d
O FF.
• If the Monito r d oe s not o p e ra te p ro p e rly,
unp lug the Po we r C o rd a nd c o nta c t yo ur
d e a le r o r Te c hnic a l Sup p o rt.
• Ha nd ling the e le c tric a l e q uip m e nt c a re le ssly
m a y c a use e le c tric a l shoc k a nd o the r
ha za rd s.
Risk of e le c tric a l sho c k. DO NO T O PEN the Mo nito r.
7
GENERAL INFORMATION: Unpacking Your Monitor & Inventorying the Parts
GENERAL INFORMATION:
Unpacking Your Monitor & Inventorying the Parts
Please make sure the parts shown in the following figure are included with
your Monitor.
If any of these items are missing or appear damaged, contact your dealer
or call Technical Support immediately.
Figure 1: Inventory of Parts
Installation CD
AC/DC
Power Adapter
CT1503/CT1703
Monitor
15-Pin VGA
Signal Cable
Audio Cable
Power Cord
S-Video Cable
RCA Cable
User’s Manual
Remote Control
USER MANUAL
8
G ENERAL INFO RMATIO N: Unp a c king Your Mo nitor & Inve ntorying the Pa rts
De p e nd ing o n the vo lta g e re q uire m e nts fo r your
a re a , the Po we r C o rd m a y b e d iffe re nt tha n wha t
is ind ic a te d in the fig ure .
Whe n unp a c king the Monitor a nd its c om p one nts:
•
•
Ca re fully o p e n the b ox.
La y the b ox fla t o n a ta b le a nd c a re fully slid e the c onte nts out
o f the b o x.
•
Do no t “d um p ” the c onte nts out o f the b ox.
DO NOT re m o ve the p ro te c tive p la stic c ove r fro m the Mo nito r.
This c ove r p rote c ts the sc re e n d uring Insta lla tio n, a nd will b e
re m o ve d whe n the Insta lla tio n is c o m p le te .
Whe n insp e c ting the Monitor a nd its c om p one nts:
•
Ve rify a ll the c o m p o ne nts a re p re se nt, a c c o rd ing to the
p re vio us fig ure .
•
Ve rify the p a rts a re no t d a m a g e d .
Sa ve the b ox a nd o the r p a c king m a te ria l in c a se the
Mo nito r ne e d s to b e re turne d .
9
CO MPO NENTS: The Ba c k of the Mo nitor (Co nne c tio n Lo c a tions)
COMPONENTS:
The Ba c k of the Monitor (CONNECTION LOCATIONS)
Figure 2: CT1503 Conne c tion Loc a tions (Ba c k-Vie w o f the Mo nito r)
Num b e r
Abb re via tion
VG A
De finition
1
2
3
4
5
6
7
8
9
15-Pin C onne c tor fo r D-Sub (Ana log )
AC / DC Ad a p te r C o nne c tio n
So und O ut C o nne c tio n
PWR
O UT AUD
AUD IN
ANTENNA
S-VIDEO
VIDEO
So und In C o nne c tio n
Tune r (TV/ C ATV) C onne c tio n
S-Vid e o Inp ut C o nne c tio n
Vid e o Inp ut C onne c tio n (Ye llow)
Ste re o Aud io Le ft C o nne c tio n (White )
Ste re o Aud io Rig ht C onne c tio n (Re d )
L AUD
AUD R
10
C OMPONENTS: The Ba c k o f the Monito r (C onne c tion Loc a tio ns)
Figure 3: CT1702 Conne c tion Loc a tions (Ba c k-Vie w o f the Mo nito r)
10
8
7
1
2
3
4
5
6
Num b e r
Abb re via tion
O UT AUD
AUD IN
De finition
1
2
3
4
So und O ut C o nne c tio n
So und In C o nne c tio n
VG A
15-Pin C onne c tor fo r D-Sub (Ana log )
AC / DC Ad a p te r C o nne c tio n
Dig ita l Vid e o Inte rfa c e C o nne c to r
PWR
5
DVI
(To b e use d if the c o m p ute r ha s a
d ig ita l VG A c a rd .)
6
7
ANTENNA
S-VIDEO
VIDEO
L AUD
Tune r (TV/ C ATV) C onne c tio n
S-Vid e o Inp ut C o nne c tio n
8
Vid e o Inp ut C onne c tio n (Ye llow)
Ste re o Aud io Le ft C o nne c tio n (White )
Ste re o Aud io Rig ht C onne c tio n (Re d )
USB Po rt (O p tio na l)
9
10
11
AUD R
USB
11
CO MPO NENTS: The Front o f the Mo nito r
COMPONENTS: The Front of the Monitor
Figure 4: CT1503/ T1702: Front of the Monitor
Mo nito r Ite m De finition
Ite m
Ite m
De finition
C T1503: 15” TFT LC D, m a x. re so lutio n 1024 x 768, 16.2M
c o lor (true c o lor).
LC D Pa ne l
(sc re e n)
1
C T1702: 17” TFT LC D, m a x. re so lutio n 1280 x 1024, 16.7M
c o lor.
Afte r c o nne c ting the a ud io inp ut, yo u c a n use the
sp e a ke rs:
Built-In
Sp e a ke rs
2
3
• C T1503: 2W o utp ut
• C T1702: 3W o utp ut
MENU
Pre ssing this b utton d isp la ys the Ma in Me nu.
12
CO MPO NENTS: The Front o f the Mo nito r
Ite m
Ite m
De finition
Pre ssing this b utton:
• Se le c ts the hig hlig hte d m e nu ite m
• Se le c ts the d e sire d Inp ut Sourc e .
C T1503 Inp ut So urc e O p tio ns/ Sc ro ll Se q ue nc e :
Ana lo g
Dig ita l
S-Vid e o
Tune r
4
SELEC T
C T1702 Inp ut So urc e O p tio ns/ Sc ro ll Se q ue nc e :
Ana log
Digita l
Comp osite
S-Vid e o
Tune r
Pre ssing this b utton:
▼ C H
• All Inp ut So urc e s: Mo ve s to the ne xt lo we r m e nu
ite m .
5
(C ha nne l
Do wn)
• TV (Tune r): Se le c ts the ne xt lo we r c ha nne l.
Pre ssing this b utton:
▲ C H
• All Inp ut So urc e s: Mo ve s to the ne xt hig he r m e nu
ite m .
6
7
(C ha nne l
Up )
• TV (Tune r): Se le c ts the ne xt hig he r c ha nne l.
Re m o te
Co ntro l
Se nso r
This se nso r re c e ive s the sig na l fro m the Re m ote C o ntro l
d e vic e .
Pre ssing this b utton:
• De c re a se s the vo lum e .
8
9
VO L
• In the MENU m o d e , d e c re a se s the va lue o f the
p a ra m e te r d isp la ye d o r c ha ng e s the d isp la ye d
op tio n.
Pre ssing this b utton:
• Inc re a se s the vo lum e .
VO L
• In the MENU m o d e , inc re a se s the va lue o f the
p a ra m e te r d isp la ye d o r c ha ng e s the d isp la ye d
op tio n.
PC (Ana lo g ): Ac tiva te s the a uto a d justm e nt func tio n.
10
11
AUTO
This func tio n a uto m a tic a lly a d justs the im a g e ’s p o sitio n o n
the LC D.
PO WER
Pre ssing this b utton, turns the Mo nito r O N or O FF.
13
Ad justing the Tilt (or Vie wing Ang le )
Ad justing the Tilt (or Vie wing Ang le )
Your Mo nitor wa s d e sig ne d to a llo w yo u to a d just it to a c o m fo rta b le
vie wing a ng le .
o
o
The Monito r c a n b e tilte d fo rwa rd 45 o r b a c k 90 .
To p re ve nt the Mo nitor fro m fa lling ove r, m a ke sure it is
within the “sa fe ” vie wing a ng le ra ng e .
Powe r Ma na g e m e nt Func tion
This Mo nitor is e q uip p e d with a DPMS (Disp la y Powe r Ma na g e m e nt
Sig na ling ) func tion tha t a utom a tic a lly c uts the p owe r d issip a tio n d own to
le ss tha n 5W whe n the c om p ute r is le ft una tte nd e d .
Altho ug h the Mo nito r c a n b e le ft in p owe r-sa ving m o d e fo r
lo ng e r p e rio d s, we re c o m m e nd tha t you turn it o ff a fte r yo ur
d a ily wo rk.
Light Sta tus
Gre e n
De finition
Powe r O N.
Powe r sa ving m o d e e na b le d .
Am b e r
14
C OMPO NENTS: The Re m o te Co ntrol
COMPONENTS: The Re m ote Control
Inse rt the b a tte ry into the Re m o te C o ntrol.
Figure 5: Re m ote Control De vic e
Re m ote Contro l Ite m De finitio n
Ite m
Ite m
De finition
1
2
POWER
MENU
Pre ssing this ite m , turns the Mo nito r O N o r O FF.
Pre ssing this ite m d isp la ys the Ma in Me nu.
Pre ssing this ite m :
▲ C H
• All Inp ut So urc e s: Mo ve s to the ne xt hig he r m e nu
ite m .
3
4
(C ha nne l
Up )
• TV (Tune r): Se le c ts the ne xt hig he r c ha nne l.
Pre ssing this ite m :
▼ C H
• All Inp ut So urc e s: Mo ve s to the ne xt lo we r m e nu
ite m .
(C ha nne l
Do wn)
• TV (Tune r): Se le c ts the ne xt lo we r c ha nne l.
15
CO MPO NENTS: The Re m o te C ontro l
Ite m
Ite m
De finition
Pre ssing this ite m :
• Inc re a se s the vo lum e .
5
VO L
• In the MENU m o d e , inc re a se s the va lue o f the
p a ra m e te r d isp la ye d or c ha ng e s the o p tio n
d isp la ye d .
Pre ssing this ite m :
• De c re a se s the vo lum e .
6
VO L
• In the MENU m o d e , d e c re a se s the va lue o f the
p a ra m e te r d isp la ye d or c ha ng e s the o p tio n
d isp la ye d .
7
8
9
MUTE
SO URC E
SELEC T
Pre ssing this ite m turns the so und O N or O FF.
Pre ssing this ite m sc ro lls thro ug h the a va ila b le Inp ut
So urc e s.
The Inp ut So urc e ’s na m e d isp la ys b rie fly in the up p e r
rig ht-ha nd c o rne r o f the sc re e n.
Pre ssing this ite m , se le c ts the hig hlig hte d m e nu ite m .
16
CONNECTING: Your Monitor to Your Com p ute r
1. Turn OFF a nd UNPLUG your Com p ute r until instruc te d othe rwise .
2. Ca re fully unpa c k a ll the c om po ne nts a nd ve rify a ll the p a rts a re
p re se nt a nd und a m a g e d . (Se e p a g e 8.)
3. Org a nize the c a b le s yo u ne e d a nd fa m ilia rize yourse lf with the
c onne c tion c onfigura tion. (Fo r the C T1503, se e p a g e s 10 & 19. Fo r the
C T1702, se e p a g e s 11 & 19.)
4. With the Monito r la ying sc re e n-sid e d own on a sm oo th, c le a n surfa c e ,
flip op e n the Monitor b a se.
Fo r e a sie r a c c e ss to the c a b le c onne c tio ns, ke e p the
Mo nito r la ying (sc re e n-sid e d o wn) o n a sm o o th surfa c e .
5. Conne c t the 15-p in VGA Ca b le to the Mo nitor’s “VGA” c onne c to r.
6. Conne c t the 15-p in VGA Ca b le to yo ur Co m p ute r.
Using yo ur fing e rs, ha nd -tig hte n the sc re ws o n the 15-Pin
c o nne c to rs.
7. Plug the Audio Ca b le into the Monitor’s “AUD IN” c o nne c tor.
To use a he a d se t, p lug the he a d se t into “AUD
O UT” c onne c tor o n the Mo nito r.
8. Conne c t the Aud io Ca b le to yo ur Com p ute r a t the sp e a ke r c a rd
lo c a tion.
9. If yo u a re not c o nne c ting a ny m ore c o m p one nts (e .g . C ATV, DVD or
VCR), c o ntinue with the re m a ining ste p s.
If yo u a re c o nne c ting othe r c o m p o ne nts to the Monito r, c o ntinue to
the ne xt a p p ro p ria te ly la b e le d “C ONNECTING ” se c tion.
17
CO NNEC TING: Yo ur Monito r to Yo ur C om p ute r
10. Conne c t the round AC/ DC Ad a p te r Plug to the Monito r’s “PWR”
c o nne c to r.
11. Conne c t the Powe r Cord to the AC/ DC Ad a p te r.
Do not p lug the Po we r C o rd into the wa ll o utle t/ surg e
p rote c to r ye t.
12. Sta nd up your Monitor a nd a d just it for p ro p e r vie wing . (Se e p a g e 14.)
13. Plug in the Powe r Cord s for b oth the Mo nitor a nd Co m p ute r to the wa ll
p o we r outle t or surg e p ro te c tor.
14. Turn ON b oth the Mo nito r a nd Co m p ute r.
15. Re m ove the p la stic prote c tive c ove r from the front o f the Monito r.
16. Pre ssing e ithe r the SELEC T b utton o n the fro nt of the Mo nitor (p a g e 12)
or the SOURCE b utto n o n the Re m o te C ontrol (p a g e 15), sc roll to the
ANALOG Inp ut So urc e op tion.
17. Inse rt the Se t-up Disk into your Com p ute r’s CD slo t a nd fo llow the
instruc tions o n p a g e 27.
18. If ne c e ssa ry, fine -tune the d ispla y b y using the On Sc re e n Disp la y
(OSD) m e nus (im a g e p o sitio n, b rig htne ss, a nd othe r ite m s).
(Se e p a g e 26.)
19. Enjoy your ne w Monitor fro m Co rne a Syste m s, Inc .!
Sa ve the o rig ina l c o nta ine r a nd the p a c king m a te ria ls in
c a se the re a re d iffic ultie s a nd yo u ne e d to re turn the
Mo nito r.
18
CO NNEC TING: Yo ur Monito r to a Tune r (TV/ CATV)
CONNECTING: Your Monitor to a Tune r (TV/ CATV)
1. Ca re fully unpa c k a ll the c om po ne nts a nd ve rify a ll the p a rts a re
p re se nt a nd und a m a g e d . (Se e p a g e 8.)
2. Org a nize the c a b le (s) you ne e d a nd fa m ilia rize yourse lf with the
c onne c tion c onfigura tion.
(Fo r the C T1503, se e p a g e s 10 & 22. For the C T1702, se e p a g e s 11 & 22.)
3. With the Monito r la ying sc re e n-sid e d own on a sm oo th, c le a n surfa c e ,
flip op e n the Monitor b a se.
Fo r e a sie r a c c e ss to the c a b le c onne c tio ns, ke e p the
Mo nito r la ying (sc re e n-sid e d o wn) o n a sm o o th surfa c e .
4. Conne c t the Ante nna (fro m yo ur C a b le TV o r e xte rna l/ inte rna l
a nte nna ) into the Monitor’s “ANTENNA” c o nne c tor.
The Ante nna c o nne c tio n should b e ha nd -tig ht.
5. Conne c t the round AC/ DC Ad a p te r Plug to the Monito r’s “PWR”
c o nne c to r.
6. Conne c t the Powe r Cord to the AC/ DC Ad a p te r.
Do not p lug the Po we r C o rd into the wa ll o utle t/ surg e
p rote c to r ye t.
7. If yo u a re not c o nne c ting a ny m ore c o m p one nts (e .g . DVD or VC R),
c o ntinue with the re m a ining ste p s.
If yo u a re c o nne c ting othe r c o m p o ne nts to the Monito r, c o ntinue to
the ne xt a p p ro p ria te ly la b e le d “C ONNECTING ” se c tion.
8. Sta nd up your Monitor a nd a d just it for p ro p e r vie wing . (Se e p a g e 14.)
20
C ONNECTING : Your Mo nitor to a Tune r (TV/ CATV)
9. Plug in the Powe r Cord for the Monitor to the wa ll p o we r outle t or surg e
p ro te c to r.
10. Turn ON the Monitor.
11. Re m ove the p la stic prote c tive c ove r from the front o f the Monito r.
12. Pre ssing e ithe r the SELEC T b utton o n the fro nt of the Mo nitor (p a g e 12)
or the SOURCE b utto n o n the Re m o te C ontrol (p a g e 15), sc roll to the
TUNER Inp ut So urc e op tion.
Inse rt the b a tte ry into the Re m o te C o ntrol.
13. Using the O n Sc re e n Disp la y (OSD) m e nus, se le c t the a p p ro p ria te
a nte nna typ e . (Se e p a g e 35.)
14. If ne c e ssa ry, c onfigure the Tune r to a utom a tic a lly se a rc h for the
c ha nne ls. (Se e p a g e 31.)
15. If ne c e ssa ry, fine -tune the d isp la y b y using the OSD m e nus (im a g e
p o sitio n, b rig htne ss, a nd othe r ite m s). (Se e p a g e s 35–37.)
16. Enjoy your ne w Monitor fro m Co rne a Syste m s, Inc .!
Sa ve the o rig ina l c o nta ine r a nd the p a c king m a te ria ls in
c a se the re a re d iffic ultie s a nd yo u ne e d to re turn the
Mo nito r.
21
Monitor
1. Ca re fully unpa c k a ll the c om po ne nts a nd ve rify a ll the p a rts a re
p re se nt a nd und a m a g e d . (Se e p a g e 8.)
2. Org a nize the c a b le (s) you ne e d a nd fa m ilia rize yourse lf with the
c onne c tion c onfigura tion.
(Fo r the C T1503, se e p a g e s 10 & 25. For the C T1702, se e p a g e s 11 & 25.)
3. With the Monito r la ying sc re e n-sid e d own on a sm oo th, c le a n surfa c e ,
flip op e n the Monitor b a se.
Fo r e a sie r a c c e ss to the c a b le c onne c tio ns, ke e p the
Mo nito r la ying (sc re e n-sid e d o wn) o n a sm o o th surfa c e .
4. At the sid e o f the Mo nito r, c onne c t the RCA Ca b le a nd / or the S-Vid e o
Ca ble , to the “AUD L”, “AUD R”, “VIDEO” a nd “S-VIDEO” lo c a tions, a s
a p p rop ria te .
5. Conne c t the ro und AC/ DC Ad a p te r Plug to the Mo nitor’s “PWR”
c o nne c to r.
6. Conne c t the Powe r Cord to the AC/ DC Ad a p te r.
Do not p lug the Po we r C o rd into the wa ll o utle t/ surg e
p rote c to r ye t.
7. If yo u a re not c o nne c ting a ny m ore c o m p one nts (e .g . Tune r/
Ante nna ), c o ntinue with the re m a ining ste p s.
If yo u a re c o nne c ting othe r c o m p o ne nts to the Monito r, c o ntinue to
the ne xt a p p ro p ria te ly la b e le d “C ONNECTING ” se c tion.
8. On the e xte rna l A/ V d e vic e (s), if no t d one a lre a d y, c onne c t the RCA
Ca ble a nd / or the S-Vid e o Ca b le , to the c orre sp o nd ing OUT “AUD L”,
“AUD R”, “VIDEO ” a nd “S-VIDEO ” loc a tio ns, a s a p p ro p ria te .
9. Sta nd up your Monitor a nd a d just it for p ro p e r vie wing . (Se e p a g e 14.)
23
CO NNEC TING: O the r Exte rna l A/ V De vic e s to Yo ur Monito r
10. Plug in the Powe r Cord for the Monitor a nd othe r A/ V d e vic e s to the
wa ll p o we r o utle t or surg e p ro te c tor.
11. Turn ON the Monitor a nd othe r A/ V d e vic e s, a s a p p ro p ria te .
12. Re m ove the p la stic prote c tive c ove r from the front o f the Monito r.
13. Pre ssing e ithe r the SELEC T b utton o n the fro nt of the Mo nitor (p a g e 12)
or the SOURCE b utto n o n the Re m o te C ontrol (p a g e 15), sc roll to the
S-VIDEO or COMPOSITE Inp ut So urc e op tio n, whic he ve r is a p p ro p ria te
for your syste m .
Inse rt the b a tte ry into the Re m o te C o ntrol.
14. If ne c e ssa ry, fine -tune the d isp la y b y using the On Sc re e n Disp la y
(OSD) m e nus (im a g e p o sitio n, b rig htne ss, a nd othe r ite m s).
(Se e p a g e 39.)
15. Enjoy your ne w Monitor from Co rne a Syste m s, Inc .!
Sa ve the o rig ina l c o nta ine r a nd the p a c king m a te ria ls in
c a se the re a re d iffic ultie s a nd yo u ne e d to re turn the
Mo nito r.
24
CO NFIG URING & ADJUSTING the Disp la y: PC (ANALOG ) Mod e
CONFIGURING & ADJUSTING the Disp la y: PC (ANALOG)
Mod e
Using the syste m ’s O n Sc re e n Disp la ys (O SD), yo u c a n a d just a nd re fine
your Mo nitor’s im a g e .
The fo llowing ta b le d e sc rib e s the initia l se t-up ste p s a nd the othe r m e nus
a va ila b le .
Re m e m b e r, whe n using the b utto ns o n the fro nt of your Monito r:
•
•
Pre ss the MENU b utto n to d isp la y the Ma in Me nu.
Use the CHANNEL ▲ ▼ b uttons to sc roll thro ug h the m e nu
ite m s.
•
•
Pre ss the SELEC T b utto n to c hoo se the d e sire d m e nu ite m a nd
to sto re the ne w va lue / p a ra m e te r.
Use the VO LUME
va lue / p a ra m e te r.
b utto ns to inc re a se / d e c re a se the
Initia l Se t-Up & Ad justm e nt o f the Mo nito r
Se le c t the Inp ut Sourc e Mod e
1. Afte r a ll the c o nne c tio ns a re
m a d e , turn O N b o th the C om p ute r
a nd the Mo nitor.
2. Se le c t the Inp ut So urc e m o d e b y
using e ithe r the Re m o te C o ntro l:
C T1503 Inp ut So urc e Sc roll Se q ue nc e :
• Pre ssing (re p e a te d ly) the
SO URC E b utton
Ana log
Digita l
S-Vid e o
Tune r
OR
The b utto ns o n the fro nt of the
Mo nito r b y:
C T1702 Inp ut So urc e Sc roll Se q ue nc e :
• Pre ssing the SELEC T b utton
(re p e a te d ly) to sc ro ll thro ug h
the va rious Inp ut So urc e
m o d e s
Ana lo g
Digita l
Co mp osite
S-Vid e o
Tune r
O R
• From the Ma in Me nu, c ho o se
the SELEC T INPUT (C T1503)/
SETUP op tio n (C T1702).
3. Se le c t the ANALO G m o d e .
26
CO NFIG URING & ADJUSTING the Disp la y: PC (ANALO G ) Mo d e
Insta ll the TFT LCD Monitor Drive r.
4. If p re viously d o ne , skip this se c tio n.
If no t p re vio usly d o ne , insta ll the INF file o n yo ur PC b y p e rfo rm ing the fo llo wing :
a . Inse rt the Insta lla tio n Disk into yo ur C o m p ute r’s C D d isk d rive .
b . Eithe r fo llow the “Ad d Ne w Ha rd wa re ” wiza rd o r a t the Wind o ws 95/ 98/
2000 d e skto p (initia l sc re e n), c lic k the rig ht m o use b utto n to o p e n a “p o p -
up ” m e nu.
c . With the le ft m o use b utto n, c lic k o n the “Pro p e rtie s” se le c tio n to o p e n the
“Disp la y Prop e rtie s” m e nu.
d . C lic k the “Se tting ” ta b a nd c lic k the “Ad va nc e d Pro p e rtie s” ta b .
e . C lic k the “Monitor” ta b a nd se le c t “Cha ng e ”.
f. C lic k o n the “Disp la y the list o f a ll the d rive rs in sp e c ific loc a tion…”
se le c tion, the n c lic k o n the “Ha ve Disk”, a nd the n, c lic k o n the “Browse
File ” b utto n.
g . Se le c t “CD d isk d rive rs”, for e xa m p le se le c t fro m the F-d rive , the “INF file ”
fo ld e r.
h. C lic k o n the INF file (LC D.inf) o n the Insta lla tion Disk a nd se le c t p ro p e r size
o f this Mo nito r.
• The size o f this Mo nito r is sta te d o n p a g e 17 o f this Ma nua l.
i. Whe n the d rive r file s a re insta lle d to the ha rd d rive , c lic k “OK” a nd p re ss
“Clo se ” to sa ve se tting s.
j. C lic k “Ye s” whe n p ro m p te d to a c c e p t the ne w “Re fre sh Ra te ” se tting .
To Cha ng e the Re solution or Re fre sh Ra te :
a . At the Wind o ws 95/ 98/ 2000 d e skto p (initia l sc re e n), c lic k the rig ht m o use
b utto n to op e n a “p o p -up ” m e nu.
b . With the le ft m o use b utto n, c lic k o n “Prop e rtie s” to op e n the “Disp la y
Prop e rtie s” m e nu.
c . C lic k o n the “Se tting ” ta b a nd c ha ng e the re so lutio n yo u wha t yo u wa nt.
d . C lic k “Ap p ly” or “OK” b utto n, the n c lic k “OK” to ke e p the se le c te d
re so lution.
e . G o b a c k to “Disp la y Prop e rtie s” m e nu a nd c lic k on the “Se tting ” ta b .
Se le c t the “Ad va nc e d Prop e rtie s” b utto n a nd the n c lic k o n “Ad a p te r”.
f. In “Ad a p te r Pro p e rtie s”, se le c t “Re fre sh Ra te ” to c ha ng e it.
• O ur Monitors sup p o rt a re fre sh ra te up to 75Hz. Fo r the b e st p o ssib le
d isp la y, we re c om m e nd a re fre sh ra te o f 60Hz.
• If yo u d o no t ha ve this o p tio n, try the p ro c e d ure a g a in a fte r insta lling
the Mo nito r d rive r.
27
CO NFIG URING & ADJUSTING the Disp la y: PC (ANALOG ) Mod e
C T1503 Ma in Me nu:
Ad just the Initia l Im a g e :
Ve rtic a l & Horizo nta l Alig nm e nt
7. If ne c e ssa ry, a t the initia l d isp la y,
a d just the VERTIC AL p o sitio n o f the
d isp la y b y:
• Pre ssing the MENU b utton to
d isp la y the Ma in Me nu.
• Pre ssing the C HANNEL ▲ ▼
b utto ns (re p e a te d ly) to sc ro ll
to the V PO SITIO N (C T1503) o r
the PO SITIO N (C T1702) o p tion.
C T1702 Ma in Me nu:
• Pre ss the SELEC T b utto n to
se le c t the m e nu ite m .
• C T1702: Use the C HANNEL ▲ ▼
b utto ns (re p e a te d ly) to sc ro ll
to the VERTIC AL op tio n on the
sub -m e nu.
• At the V PO SITIO N o r VERTIC AL
sub -m e nu, use the VO LUME
b utto ns to m o ve the
im a g e up o r d o wn until it is
c e nte re d ve rtic a lly o n the
d isp la y.
C T1503 Ve rtic a l Po sitio n Sub -Me nu:
• O nc e yo u ha ve ve rtic a lly
c e nte re d the d isp la y, p re ss the
SELEC T b utto n.
C T1702 Positio n Sub -m e nu:
8. No w, c e nte r the d isp la y
HO RIZO NTALLY b y:
• Re p e a ting sa m e g e ne ra l
p ro c e d ure fo r the ve rtic a l
a d justm e nt, b ut b y se le c ting
the H PO SITIO N (C T1503) o r the
HO RIZO NTAL (C T1702) o p tio n
inste a d .
C T1503 Horizo nta l Po sition Disp la y:
• Re m e m b e r to p re ss the SELEC T
b utto n whe n the d isp la y is
c e nte re d ho rizo nta lly.
28
CO NFIG URING & ADJUSTING the Disp la y: PC (ANALO G ) Mo d e
C T1503 Ma in Me nu:
Ad just the Cla rity of the Im a g e :
Pha se
9. If ne c e ssa ry, a d just the c la rity o f
the im a g e b y:
• Pre ssing the MENU b utton to
d isp la y the Ma in Me nu.
• Pre ssing the C HANNEL ▲ ▼
b utto ns (re p e a te d ly) to sc ro ll
to the PHASE (C T1503) o r the
PO SITIO N (C T1702) op tio n.
• Pre ss the SELEC T b utto n to
se le c t the m e nu ite m .
C T1702 Ma in Me nu:
• C T1702: Use the C HANNEL ▲ ▼
b utto ns (re p e a te d ly) to sc ro ll
to the PHASE o p tio n.
• At the PHASE sub -m e nu, use
the VO LUME
b utto ns to
a d just the c la rity o f the im a g e .
• O nc e yo u ha ve the im a g e se t
to yo ur liking , p re ss the SELEC T
b utto n.
C T1503 Pha se Sub -Me nu:
C T1702 Positio n Sub -Me nu:
29
CO NFIG URING & ADJUSTING the Disp la y: PC (ANALOG ) Mod e
Ad just the Brig htne ss & Contra st
C T1503 Ma in Me nu:
Brig htne ss
• C ontro ls the o ve ra ll im a g e a nd
b a c kg ro und sc re e n b rig htne ss.
10. Pre ss the MENU b utto n to d isp la y
the Ma in Me nu.
11. Pre ssing the C HANNEL ▲ ▼
b utto ns (re p e a te d ly), sc ro ll to the
BRIG HTNESS (C T1503) o r the
BRIG HTNESS/C O NTRAST (C T1702)
ite m .
C T1702 Ma in Me nu:
12. Pre ss the SELEC T b utton to c ho ose
the d e sire d ite m .
13. At the a p p ro p ria te sub -m e nu, use
the VO LUME
b utto ns to
a d just the b rig htne ss o f the im a g e .
14. Onc e yo u ha ve the b rig htne ss se t
to yo ur liking , p re ss the SELEC T
b utto n.
C T1503 Brig htne ss Sub -Me nu:
C T1702 Brig htne ss Sub -Me nu:
Co ntra st
• C ontro ls the im a g e b rig htne ss
in re la tion to the b a c kg ro und .
C T1503 C o ntra st Sub -Me nu:
C T1702 C o ntra st Sub -Me nu:
15. Re p e a t the sa me g e ne ra l
p ro c e d ure fo r the b rig htne ss
a d justm e nt, b ut b y se le c ting the
C O NTRAST (C T1503) o r the
BRIG HTNESS/C O NTRAST (C T1702)
o p tio n inste a d .
16. O nc e yo u ha ve the c o ntra st se t
to yo ur liking , p re ss the SELEC T
b utto n.
30
Exp la na tio n of Re m a ining Me nu Ite m s: PC (ANALO G ) Mo d e
Exp la na tion of Re m a ining Me nu Ite m s: PC (ANALOG)
Mod e
The fo llowing ta b le d e sc rib e s the othe r m e nus a va ila b le .
Figure 9: The Ma in Me nus for the CT1503 a nd the CT1702, re sp e c tive ly:
C T1503 C loc k Sub -Me nu:
C T1702 C loc k Sub -Me nu:
CLOCK
• Pe rfo rm s a ro ug h im a g e tuning
b y sc re e n size a d justm e nt.
• C T1702: The C LO C K sub -m e nu
is o b ta ine d via the PO SITIO N
ite m o n the Ma in Me nu.
31
Exp la na tio n of Re m a ining Me nu Ite m s: PC (ANALO G ) Mo d e
C T1503 C o lo r Sub -Me nu:
COLOR
• Fine -tune s the im a g e vie wing .
Pre se t 1
• Bluish White
Pre se t 2
• Pla in White
C T1503 Use r C olo r Sub -Me nu:
Use r Color (CT1503 only)
• C ontro ls the ind ivid ua l c o lo rs o f
Re d , G re e n, a nd Blue .
Exit (CT1702 only)
• C lo se s this sub -m e nu a nd
re turns to the Ma in Me nu.
C T1702 C o lo r Sub -Me nu:
C T1702 Use r C olo r Sub -Me nu:
32
Exp la na tio n of Re m a ining Me nu Ite m s: PC (ANALO G ) Mo d e
C T1503:
OSD FUNCTION (CT1503 only)
H Position
• C ontro ls the O SD ho rizonta l
p o sitio n.
V Position
• C ontro ls the O SD ve rtic a l
p o sitio n.
La ng ua g e
• C ontro ls the la ng ua g e use d fo r
the O SD.
Off Tim e r
• The O SD d isp la y tim e d uring
the a b se nc e of use r c o ntro l.
Exit
• C lo se s this sub -m e nu a nd
re turns to the Ma in Me nu.
C T1503/C T1702:
SELECT INPUT (CT1503)/
SETUP (CT1702)
• Disp la ys c urre nt Inp ut Sig na l.
• Allo ws c ha ng e o f the Inp ut
Sig na l to the o the r o p tions.
EXIT MENU
• C lo se s the Ma in Me nu.
33
CO NFIG URING & ADJUSTING the Disp la y: TV/ C ATV (TUNER) Mo d e
CONFIGURING & ADJUSTING the Disp la y: TV/ CATV
(TUNER) Mod e
Using the syste m ’s O n Sc re e n Disp la ys (O SD), yo u c a n a d just a nd re fine
your Mo nitor’s im a g e .
The fo llowing ta b le d e sc rib e s the initia l se t-up ste p s a nd the othe r m e nus
a va ila b le .
Re m e m b e r, whe n using the b utto ns o n the fro nt of your Monito r:
•
•
Pre ss the MENU b utto n to d isp la y the Ma in Me nu.
Use the CHANNEL ▲ ▼ b uttons to sc roll thro ug h the m e nu
ite m s.
•
•
Pre ss the SELEC T b utto n to c hoo se the d e sire d m e nu ite m a nd
to sto re the ne w va lue / p a ra m e te r.
Use the VO LUME
va lue / p a ra m e te r.
b utto ns to inc re a se / d e c re a se the
Initia l Se t-Up & Ad justm e nt o f the Mo nito r
Se le c t the Inp ut So urc e Mod e
1. Afte r a ll the c o nne c tio ns a re
m a d e , turn O N the Mo nito r a nd
o the r d e vic e s, a s a p p ro p ria te .
2. Se le c t the Inp ut So urc e m od e b y
using e ithe r the Re m o te C o ntro l:
C T1503 Inp ut So urc e Sc ro ll Se q ue nc e :
• Pre ssing (re p e a te d ly) the
SO URC E b utto n
Ana log
Digita l
S-Vid e o
Tune r
OR
The b utto ns o n the fro nt o f the
Mo nitor b y:
C T1702 Inp ut So urc e Sc ro ll Se q ue nc e :
• Pre ssing the SELEC T b utto n
(re p e a te d ly) to sc roll throug h
the va rio us Inp ut So urc e
m o d e s
Ana lo g
Digita l
Co mp osite
S-Vid e o
Tune r
O R
• Fro m the Ma in Me nu, c ho ose
the SELEC T INPUT (C T1503)/
SETUP o p tio n (C T1702).
3. Se le c t the TUNER m o d e .
34
CO NFIG URING & ADJUSTING the Disp la y: TV/ C ATV (TUNER) Mo d e
Adjust the Im a g e Po sition & Cla rity
4. If ne c e ssa ry,
• To a d just the VERTIC AL p o sitio n, se e p a g e 28.
• To a d just the HORIZO NTAL p o sitio n, se e p a g e 28.
• To a d just the C LARITY o f the im a g e , se e p a g e 29.
• To a d just the BRIG HTNESS of the im a g e , se e p a g e 30.
• To a d just the C O NTRAST of the im a g e , se e p a g e 30.
C T1503 Ma in Me nu:
Se le c t the Prop e r Ante nna :
AIR or CATV
5. At the initia l d isp la y, se le c t the
a nte nna a p p rop ria te fo r yo ur
syste m b y:
• Pre ssing the MENU b utto n to
d isp la y the Ma in Me nu.
• Pre ssing the C HANNEL ▲ ▼
b utto ns (re p e a te d ly) to sc ro ll
to the C HANNEL o p tio n.
C T1702 Ma in Me nu:
• Pre ss the SELEC T b utto n to
se le c t the ite m .
6. At the C HANNEL sub -m e nu:
• If the AIR/ C ATV ite m is no t
hig hlig hte d , use C HANNEL
▲ ▼ b utto ns to sc ro ll to it.
• Pre ss the SELEC T b utto n to fully
hig hlig ht the AIR/ CATV ite m .
C T1503/ C T1702 C ha nne l Sub -Me nu:
AIR O p tio n:
• At the C HANNEL sub -m e nu, use
the VO LUME
b uttons to
sc ro ll thro ug h the a nte nna
o p tio ns (Air o r C ATV).
• Pre ss the SELEC T b utto n to
c ho ose the a p p ro p ria te
o p tio n.
C ATV O p tio n:
35
CO NFIG URING & ADJUSTING the Disp la y: TV/ C ATV (TUNER) Mo d e
C T1503/ C T1702 C ha nne l Sub -Me nu:
Autom a tic a lly Se a rc h for
Cha nne ls
7. While in this sub -m e nu, to
a utom a tic a lly se a rc h/ a d d
c ha nne ls fro m the c a b le syste m:
• Use the C HANNEL ▲ ▼
b utto ns, to sc ro ll to the AUTO
C HANNEL ite m .
• Pre ss the SELEC T b utto n to fully
hig hlig ht a nd vie w the o p tio ns
fo r this ite m .
C T1503/ C T1702 C ha nne l Sub -Me nu:
• The syste m will sta rt
a uto m a tic a lly se a rc hing a nd
a d d ing c ha nne ls.
8. If you d o not wa nt to a utom a tic a lly
se a rc h/ a d d c ha nne ls: d o no t
se le c t this o p tio n.
Othe r Sub -Me nu Op tions:
Ma nua lly Ad d / Re m o ve Cha nne ls:
9. While in this sub -m e nu:
• Use the C HANNEL ▲ ▼ b utto ns, to sc roll to the MANUAL C HANNEL ite m .
• Pre ss the SELEC T b utto n to fully hig hlig ht a nd vie w the o p tio ns for this ite m .
• Use the C HANNEL ▲ ▼ b utto ns, to c ho o se the ADD o r DELETE op tio n a s
d e sire d .
Re fining the Vid e o Im a g e :
10. While in this sub -me nu:
• Use the C HANNEL ▲ ▼ b utto ns, to sc roll to the FINE ite m .
• Pre ss the SELEC T b utto n to fully hig hlig ht a nd vie w the o p tio ns for this ite m .
• Use the C HANNEL ▲ ▼ b utto ns, to inc re m e nt the a d justm e nt to ma ke the
im a g e a s c le a r a s p o ssib le .
EXIT the Sub -Me nu
11. Using the C HANNEL ▲ ▼ b utto ns, sc ro ll to the EXIT ite m .
12. Pre ss the SELEC T b utto n.
• This a c tion re turns you to the Ma in Me nu.
36
Exp la na tio n o f Re m a ining Me nu Ite m s: TV/ C ATV (TUNER) & S-VIDEO Mod e s
Exp la na tion of Re m a ining Me nu Ite m s: TV/ CATV (TUNER)
& S-VIDEO Mod e s
The fo llowing ta b le d e sc rib e s the othe r m e nus a va ila b le .
Figure 10: The Ma in Me nus for the CT1503 a nd the CT1702, re sp e c tive ly
C T1503/C T1702 C o lo r Sub -Me nu:
COLOR
Colo r
• C o ntro ls the thic kne ss of the
c olo r sig na l le ve l.
Tint
• C o ntro ls the to ne o f the
c olo r sig na l le ve l.
Sha rp ne ss
• C o ntro ls the sha rp ne ss o f
the sig na l le ve l.
C T1503 O SD Func tio n Sub -Me nu:
OSD FUNCTION (CT1503 Only)
H Position
• C o ntro ls the O SD ho rizonta l
p o sitio n.
V Po sitio n
• C o ntro ls the O SD ve rtic a l
p o sitio n.
La ng ua g e
• C o ntro ls the la ng ua g e use d
for the O SD.
Off Tim e r
• The O SD d isp la y tim e d uring
the a b se nc e o f use r c ontro l.
Exit
• C lo se s this sub -m e nu.
37
Exp la na tio n of Re m a ining Me nu Ite m s: TV/ CATV (TUNER) & S-VIDEO Mo d e s
C T1503/C T1702 Sub -Me nu:
SELECT INPUT (CT1503)/
SETUP (CT1702)
• Disp la ys c urre nt Inp ut
So urc e .
• Allo ws c ha ng e o f the Inp ut
So urc e to the o the r o p tio ns.
EXIT
• C lo se s the Ma in Me nu.
38
C ONFIGURING & ADJUSTING the Disp la y: Exte rna l De vic e s (S-VIDEO ) Mo d e
CONFIGURING & ADJUSTING the Disp la y:
Exte rna l De vic e s (S-VIDEO) Mod e
Using the syste m ’s O n Sc re e n Disp la ys (O SD), yo u c a n a d just a nd re fine
your Mo nitor’s im a g e .
The fo llowing ta b le d e sc rib e s the initia l se t-up ste p s a nd the othe r m e nus
a va ila b le .
Re m e m b e r, whe n using the b utto ns o n the fro nt of your Monito r:
•
•
Pre ss the MENU b utto n to d isp la y the Ma in Me nu.
Use the CHANNEL ▲ ▼ b uttons to sc roll thro ug h the m e nu
ite m s.
•
•
Pre ss the SELEC T b utto n to c hoo se the d e sire d m e nu ite m a nd
to sto re the ne w va lue / p a ra m e te r.
Use the VO LUME
va lue / p a ra m e te r.
b utto ns to inc re a se / d e c re a se the
Initia l Se t-Up & Ad justm e nt o f the Mo nito r
Se le c t the Input Sourc e Mod e
1. Afte r a ll the c o nne c tions a re
m a d e , turn O N the Mo nito r a nd
o the r d e vic e s, a s a p p ro p ria te .
2. Se le c t the Inp ut So urc e m o d e b y
using e ithe r the Re m o te C o ntro l:
C T1503 Inp ut So urc e Sc ro ll Se q ue nc e :
• Pre ssing (re p e a te d ly) the
SO URC E b utton
Ana log
Digita l
S-Vid e o
Tune r
OR
The b utto ns on the fro nt of the
Mo nito r b y:
C T1702 Inp ut So urc e Sc ro ll Se q ue nc e :
• Pre ssing the SELEC T b utto n
(re p e a te d ly) to sc ro ll thro ug h
the va rio us Inp ut So urc e
m od e s
Ana lo g
Digita l
Co mp osite
S-Vid e o
Tune r
O R
• Fro m the Ma in Me nu, c ho o se
the SELEC T INPUT (C T1503)/
SETUP o p tio n (C T1702).
3. Se le c t the S-VIDEO m o d e .
39
CO NFIG URING & ADJUSTING the Disp la y: Exte rna l De vic e s (S-VIDEO) Mod e
Ad just the Im a ge Position & Cla rity
4. If ne c e ssa ry,
• To a d just the VERTIC AL p ositio n, se e p a g e 28.
• To a d just the HO RIZO NTAL p ositio n, se e p a g e 28.
• To a d just the C LARITY o f the im a g e , se e p a g e 29.
Fo r a n e xp la na tio n of the re m a ining m e nu ite m s,
p le a se se e the "Exp la na tion o f Re m a ining Me nu
Ite m s: TV/C ATV (TUNER) & S-VIDEO Mo d e s" se c tio n
o n p a g e 37.
40
TROUBLESHO OTING : Re so lutio n to Pote ntia l Pro b le m s
TROUBLESHOOTING: Re solution to Pote ntia l Prob le m s
This se c tio n trie s to a ntic ip a te p ote ntia l p rob le m s tha t you m a y e nc ounte r
in the d a y-to -d a y use of your Monito r.
If, a fte r trying the sug g e ste d so lutio ns, your Monito r’s sym p to m re m a ins the
sa m e , c o nta c t yo ur a utho rize d se rvic e c e nte r o r c a ll Te c hnic a l Sup p o rt.
Troub le shoo ting Pro b le m s
Prob le m
Corre c tive Ac tion
• Using the O n Sc re e n Disp la y (O SD),
a d just the Brig htne ss a nd C ontra st to
m a xim um o r re se t the m to the
d e fa ult se tting s.
LED Gre e n
• C he c k the p owe r switc h.
• Che c k if the AC Po we r Co rd is
p ro p e rly c o nne c te d to the AC
Ad a p te r.
LED OFF
No Pic ture
• C he c k if the vid e o sig na l c a b le is
p ro p e rly c o nne c te d a t the b a c k o f
Mo nito r.
LED Am b e r
• C he c k if the p o we r to c om p ute r
syste m is O N.
• Ad just the Fre q ue nc y a nd Pha se
se tting s using the O SD.
The disp la y not c le a r.
• Ad just the Brig htne ss a nd C ontra st
se tting s using the O SD.
The d isp la y is too lig ht/ d a rk.
• Ad just the Ho rizo nta l a nd Ve rtic a l
p o sitio n se tting s using the O SD.
The im a g e is not c e nte re d .
“Out of Ra ng e ” m e ssa g e
• Che c k the m a xim um re so lutio n a nd
the fre q ue nc y o n the vid e o p o rt o f
yo ur C o m p ute r.
• C he c k the sig na l c a b le c o nne c tio n
b e twe e n yo ur C o m p ute r a nd
Mo nito r.
The p ic ture is sc ra m b le d .
41
TRO UBLESHOO TING: Re solution to Po te ntia l Prob le m s
Prob le m
Corre c tive Ac tion
• Pre ss the AUTO b utto n, o n yo ur
Mo nito r, to a uto m a tic a lly c o nfig ure
yo ur Mo nitor.
The p ic ture is fuzzy.
• C he c k the sig na l c a b le c o nne c tion
b e twe e n yo ur C o m p ute r a nd
Mo nito r.
The p ic ture b ounc e s or ha s wa vy
osc illa tio ns.
• C he c k the sig na l c a b le c o nne c tion
b e twe e n yo ur C o m p ute r a nd
Mo nito r.
The p ic ture a p p e a rs to b e g hosting .
The c o lor o n the sc re e n is not unifo rm
• Ad just the c o lo r se tting s using the
O SD c o lo r m e nu.
The c olo rs on the sc re e n a re
d isto rte d with d a rk or sha d owe d
a re a s.
• Ad just the c o lo r se tting s using the
O SD c o lo r m e nu.
• The Mo nito r is using its p o we r
m a na g e m e nt syste m . Che c k the
p o we r m a na g e m e nt utility on yo ur
Co m p ute r.
The Po we r Ind ic a tor is b linking a n
a m b e r c olo r.
42
APPENDIX: Wa rra nty
APPENDIX: Wa rra nty
END-USER WARRANTY TERMS AND CONDITIONS
Effe c tive 12/ 11/ 2001
Co rne a Syste m s, Inc . (“Co rne a ”) wa rra nts yo ur ne w Co rne a d isp la y(s)
a g a inst d e fe c ts in m a te ria l a nd wo rkm a nship d uring the wa rra nty p e rio d
from the d a te of the orig ina l p urc ha se o f the ne w p rod uc t within the
te rritory.
If a p ro d uc t p ro ve s to b e d e fe c tive in m a te ria l o r wo rkm a nship d uring the
wa rra nty p e rio d , C orne a will, a t its so le op tio n, re p a ir o r re p la c e the
p rod uc t with a sim ila r p ro d uc t, p rovid e d the p urc ha se r a d he re s to c e rta in
re turn a utho riza tio n p roc e d ure s a nd g uid e line s.
For b e tte r se rvic e , Co rne a stro ng ly e nc oura g e s you to re g iste r yo ur
p rod uc t b y filling out the wa rra nty re g istra tio n c a rd p ro vid e d with your
p rod uc t or re g iste r online .
Wa rra nty Pe rio d
Prod uc t
Typ e
Ad va nc e
d Swa p
Pa rts
La b or
Ba c klight
TFT-LC D
LC D-TV
Pla sm a
3-Ye a r
3-Ye a r
1-Ye a r
3-Ye a r
3-Ye a r
1-Ye a r
3-Ye a r
3-Ye a r
No
1st Ye a r
1st Ye a r
No
1st Ye a r Ad va nc e d Swa p Se rvic e
•
If re p a irs a re ne c e ssa ry, a nd yo u a re e ntitle d to se rvic e und e r
the te rm s a nd c o nd itions o f the lim ite d wa rra nty, a
re p la c e m e nt unit will b e se nt to yo u in e xc ha ng e o f yo ur
d e fe c tive fo r re p a ir d uring the first ye a r p ro d uc t wa rra nty
p e rio d .
•
•
With the a d va nc e d swa p se rvic e , ship p ing is c ove re d b o th
d ire c tions. A re turn-ship p ing la b e l will b e inc lud e d with the
re p la c e m e nt unit.
If a n a d va nc e d swa p is d e sire d , the c usto m e r will b e re q uire d
to sub m it a va lid c re d it c a rd num b e r, with the a c c o unt in
g oo d sta nd ing , a s c o lla te ra l.
43
APPENDIX: Wa rra nty
•
Your c re d it c a rd will b e c ha rg e d if the d e fe c tive unit is no t
re c e ive d in 15 d a ys a fte r yo u re c e ive the re p la c e m e nt.
This se rvic e will b e p ro vid e d e xc lusive ly b y yo ur Co rne a Te c hnic a l Sup p o rt
Ce nte r a nd a utho rize d a g e nts. Yo ur p rod uc t will not b e a c c e p te d fo r
re p a ir unle ss you first c onta c t Co rne a Te c hnic a l Sup p ort Ce nte r who will
p ro vid e instruc tions o n how to re turn your p ro d uc t for re p a ir. Onc e the
p ro d uc t ha s b e e n re p a ire d , it will b e re turne d fre e o f c ha rg e to the
a d d re ss you d e sig na te d within the te rrito ry.
Da te o f Orig ina l Purc ha se
A c o p y of the c ustom e r’s o rig ina l p ro of-o f-p urc ha se will b e re q uire d to
e sta b lish the o rig ina l d a te o f p urc ha se fo r a ll wa rra nty se rvic e . If a c op y o f
the o rig ina l p ro of-o f-p urc ha se is not a va ila b le , the wa rra nty p e riod will b e
c o nsid e re d to b e g in fro m the d a te o f m a nufa c ture .
Te rrito ry
Wa rra nty g e o g ra p hic te rrito ry c o ve rs c o ntine nta l USA a nd Ca na d a .
Re p la c e m e nt of Pro d uc t
Re p la c e m e nt p ro d uc t o r p a rts m a y inc lud e re m a nufa c ture d o r re furb ishe d
p a rts o r c o m p o ne nts. The re p la c e m e nt p ro d uc t is wa rra nte d fo r 60 d a ys o r
for the p e rio d re m a ining o n the o rig ina l wa rra nty, whic he ve r is g re a te r.
Ship p ing
Re p la c e m e nt/ re p a ire d p ro d uc t will b e ship p e d via UPS d e live ry, to a ny
p o int within the te rrito ry. Extra fre ig ht c ha rg e s will a p p ly fo r e xp e d ite d
ship p ing , if suc h se rvic e is a va ila b le .
Wa rra nty Exc lusio n
•
The lim ite d wa rra nty d o e s no t c ove r the re p a ir o f d a m a g e s
o c c urring a fte r yo u p urc ha se the Monito r in ship p ing o r in
sto ra g e o r tha t c a use d b y d isa ste r, a c c id e nt, m isuse , a b use ,
ne g lig e nc e , m isha nd ling , im p ro p e r p a c ka g ing o r ship p ing ,
una utho rize d re p a ir or m o d ific a tion, o r a c ts of G od .
•
This lim ite d wa rra nty d o e s not c ove r re p a ir o f Mo nito r d isp la y
q ua lity d e g ra d a tio n re sulting fro m fa ilure o f follo wing the
m a nufa c ture r’s instruc tio n with re sp e c t to p ro p e r ha nd ling ,
op e ra tio n, insta lla tio n, usa g e , se rvic e a nd m a inte na nc e o f the
Mo nitor.
44
APPENDIX: Wa rra nty
•
•
Co rne a sha ll no t b e lia b le fo r a ny inc id e nta l o r c onse q ue ntia l
d a m a g e s re sulting fro m the use o f this p rod uc t.
Do NO T o p e n the Mo nitor ho using und e r a ny c irc um sta nc e s.
By op e ning the Monito r ho using you will e xp o se yo urse lf to
p o ssib le e le c tric a l d a ng e rs a nd void a ll wa rra ntie s.
Be fo re Co nta c ting Us…
In m a ny c a se s, yo ur Monito r m a y not ne e d re p a ir. Be fore yo u c o nta c t us,
p le a se c o nsult the troub le sho oting se c tio n in your use r’s g uid e to se e if yo u
c a n e a sily re m e d y the p rob le m yo urse lf:
If this a p p ro a c h d o e s no t re solve yo ur C orne a Mo nitor p rob le m , p le a se :
•
•
•
Lo c a te your p roo f of p urc ha se d a te , ind ic a te d o n yo ur
re c e ip t o r invo ic e
Ge t yo ur p rod uc t m o d e l a nd se ria l num b e r (MPxxxxxxxx on the
b a c k o f yo ur Mo nitor)
Ha ve the d e fe c tive p ro d uc t in fro nt of you a nd c a ll us.
Co rne a Te c hnic a l Sup p o rt Se rvic e
During a ll thre e ye a rs of p ro d uc t wa rra nty, we sup p ort your b a sic
c o nfig ura tion, se tup a nd tro ub le sho o ting q ue stio ns, a nd whe n re q uire d ,
we p ro vid e you with a ll instruc tions o n how to re turn your p rod uc t for
re p a ir.
For sup p o rt inq uirie s in the Unite d Sta te s o r C a na d a , p le a se c a ll:
1-800-681-6155
Mond a y thro ug h Frid a y
8 a .m . to 5 p .m . Pa c ific Tim e
Re turn Autho riza tio n Pro c e d ure
1. Conta c t Us
The C orne a Te c hnic a l Sup p ort sta ff will he lp you id e ntify if the unit
ne e d s to b e re p a ire d .
2. Fill out a n RMA (RETURN MERCHANDISE AUTHORIZATION) Form
Onc e re p a ir se rvic e is re q uire d , yo u’ll b e instruc te d to fill o ut a n RMA
form (a va ila b le online ). Yo u will b e re q ue ste d to p ro vid e p ro d uc t
m od e l na m e a nd se ria l num b e r (lo c a te d o n the b a c k o f yo ur Mo nitor),
the o rig ina l p ro of-o f-p urc ha se , yo ur na m e a nd c onta c t inform a tion, a
d e sc rip tio n o f the p ro b le m & your c re d it c a rd (VISA, Ma ste rC a rd , o r
45
APPENDIX: Wa rra nty
Am e ric a n Exp re ss) info rm a tion, if first ye a r a d va nc e d swa p is
a p p lic a b le .
3. Ac q uire a n RMA Num b e r
Afte r we re c e ive yo ur RMA re q ue st, C orne a te c hnic a l sup p ort sta ff will
c o nta c t yo u within 48 ho urs a nd a ssig n you a n RMA num b e r. Fo r
a d va nc e d swa p se rvic e , a re p la c e m e nt unit will b e se nt to yo u.
4. Re turn the Unit for Re p a ir/ Re p la c e m e nt
Ple a se se nd yo ur o rig ina l unit b a c k to us in the orig ina l unit b ox.
Da m a g e d ue to im p ro p e r o r ina d e q ua te p a c king will b e c ha rg e d to
you a s a n out-o f-wa rra nty c ost. For a d va nc e d swa p se rvic e , p le a se
use the p rovid e d m a iling la b e l. A d e sig na te d c o urie r will p ic k up the
re turne d . The o rig ina l unit m ust b e p ro p e rly p a c ka g e d in the sa m e
m a nne r a s the re p la c e m e nt unit, utilizing the p a c king m a te ria ls
p rovid e d .
5. Re c e ive a Re p la c e m e nt/ Re p a ire d Unit
Onc e the unit is re p a ire d , we will ship b a c k to yo u fre e of c ha rg e . If the
unit is no t re p a ira b le , we will se nd you a re p la c e m e nt inste a d .
Re p la c e m e nt p ro g ra m is sub je c t to te rm ina tion a t
a ny tim e witho ut a d va nc e no tic e .
46
APPENDIX: CT1503 Ana log Disp la y Mo d e s (Ana lo g )
APPENDIX: CT1503 Ana log Disp la y Mod e s (Ana log )
Fo r the d isp la y m o d e s liste d b e low, the sc re e n im a g e ha s b e e n o p tim ize d
d uring p ro d uc tion.
Pre se t Tim ing Mod e s (Ana log )
Displa y
Mod e
Horizonta l
Fre q ue nc y (KHz) Fre q ue nc y (Hz)
Ve rtic a l
Mode
Sta nd a rd Typ e
640 x 350
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
31.5KHz
31.5KHz
31.5KHz
37.9KHz
37.5KHz
43.3KHz
35.2KHz
37.9KHz
48.0KHz
46.9KHz
53.7KHz
48.4KHz
56.5KHz
60.0KHz
70Hz
70Hz
60Hz
72Hz
75Hz
85Hz
56Hz
60Hz
72Hz
75Hz
85Hz
60Hz
70Hz
75Hz
IBM®
IBM®
Ind ustry Sta nd a rd
VESA Sta nd a rd
VESA Sta nd a rd
VESA Sta nd a rd
VESA G uid e line s
VESA G uid e line s
VESA Sta nd a rd
VESA Sta nd a rd
VESA Sta nd a rd
VESA G uid e line s
VESA Sta nd a rd
VESA Sta nd a rd
VGA
SVGA
XGA
O ur Mo nito r is no t sup p o rte d o utsid e of the d isp la y m od e s
liste d a b o ve .
47
APPENDIX: C T1702 Disp la y Mod e s (Ana lo g )
APPENDIX: CT1702 Disp la y Mod e s (Ana log )
Fo r the d isp la y m o d e s liste d b e low, the sc re e n im a g e ha s b e e n o p tim ize d
d uring p ro d uc tion.
Pre se t Tim ing Mo d e s (Ana lo g )
Horizonta l
Fre q ue nc y
(KHz)
Ve rtic a l
Fre que nc y
(Hz)
Displa y
Mod e
Sta nd a rd
Typ e
Mode
640 x 350
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
31.5KHz
31.5KHz
31.5KHz
37.9KHz
37.5KHz
43.3KHz
35.2KHz
37.9KHz
48.0KHz
46.9KHz
53.7KHz
48.4KHz
56.5KHz
60.0KHz
68.7KHz
64.0KHz
80.0KHz
70Hz
70Hz
60Hz
72Hz
75Hz
85Hz
56Hz
60Hz
72Hz
75Hz
85Hz
60Hz
70Hz
75Hz
85Hz
60Hz
75Hz
IBM®
IBM®
Ind ustry Sta nd a rd
VESA Sta nd a rd
VESA Sta nd a rd
VESA Sta nd a rd
VESA G uid e line s
VESA G uid e line s
VESA Sta nd a rd
VESA Sta nd a rd
VESA Sta nd a rd
VESA G uid e line s
VESA Sta nd a rd
VESA Sta nd a rd
VESA Sta nd a rd
VESA Sta nd a rd
VESA Sta nd a rd
VGA
SVGA
XGA
SXGA
O ur Mo nito r is no t sup p o rte d o utsid e of the d isp la y m od e s
liste d a b o ve .
48
APPENDIX: CT1703 Disp la y Mod e s (Dig ita l)
APPENDIX: CT1703 Disp la y Mod e s (Dig ita l)
Fo r the d isp la y m o d e s liste d b e low, the sc re e n im a g e ha s b e e n o p tim ize d
d uring p ro d uc tion.
Pre se t Tim ing Mo d e s (Dig ita l)
Horizonta l
Fre q ue nc y
(KHz)
Ve rtic a l
Fre q ue nc y
(Hz)
Displa y
Mod e
Sta nd a rd
Type
Mode
640 x 350
720 x 400
31.5KHz
31.5KHz
70Hz
70Hz
IBM®
IBM®
Ind ustry
Sta nd a rd
VGA
640 x 480
31.5KHz
60Hz
640 x 480
640 x 480
37.9KHz
37.5KHz
72Hz
75Hz
VESA Sta nd a rd
VESA Sta nd a rd
VESA
G uid e line s
800 x 600
800 x 600
35.2KHz
37.9KHz
56Hz
60Hz
VESA
G uid e line s
SVGA
800 x 600
800 x 600
48.0KHz
46.9KHz
72Hz
75Hz
VESA Sta nd a rd
VESA Sta nd a rd
VESA
G uid e line s
1024 x 768
48.4KHz
60Hz
XGA
1024 x 768
1024 x 768
1280 x 1024
56.5KHz
60.0KHz
64.0KHz
70Hz
75Hz
60Hz
VESA Sta nd a rd
VESA Sta nd a rd
VESA Sta nd a rd
SXGA
O ur Mo nito r is no t sup p o rte d o utsid e of the d isp la y m od e s
liste d a b o ve .
49
APPENDIX: Re g ula to ry Co m p lia nc e
APPENDIX: Re g ula tory Com p lia nc e
Ca na d ia n De pa rtm e nt of Com m unic a tions Com p lia nc e Sta te m e nt
DO C: This C la ss B d ig ita l a p p a ra tus m e e ts a ll re q uire m e nts o f the Ca na d ia n
Inte rfe re nc e -Ca using Eq uip m e nt Re g ula tio ns.
C-UL: Be a rs the C -UL Ma rk a nd is in c o m p lia nc e with C a na d ia n Sa fe ty Re g ula tio ns a c c o rd ing to
C.S.A. C22.2 No . 950.
FCC Inform a tion
1. Use the a tta c he d sp e c ifie d c a b le s with the CT1503/ CT1703 c o lor m o nito r so a s no t to inte rfe re
with ra d io a nd te le visio n re c e p tio n.
(1) Ple a se use the sup p lie d p o we r c a b le o r e q uiva le nt to e nsure FC C c om p lia nc e .
(2) Ple a se use the sup p lie d AC Ad a p te r.
(3) Ple a se use the sup p lie d shie ld e d vid e o sig na l c a b le .
(4) Ple a se use the sup p lie d DVI-D to DVI-D c a b le .
(5) Ple a se use the sup p lie d USB c a b le .
Use o f o the r c a b le s a nd a d a p te rs m a y c a use inte rfe re nc e with ra d io a nd te le visio n
re c e p tio n.
2. This e q uip m e nt ha s b e e n te ste d a nd fo und to c o m p ly with the lim its fo r a C la ss B d ig ita l
d e vic e , p ursua nt to p a rt 15 o f the FC C Rule s. The se lim its a re d e sig ne d to p ro vid e re a so na b le
p ro te c tio n a g a inst ha rm ful inte rfe re nc e in a re sid e ntia l insta lla tio n. This e q uip m e nt g e ne ra te s,
use s, a nd c a n ra d ia te ra d io fre q ue nc y e ne rg y, a nd , if no t insta lle d a nd use d in a c c o rd a nc e
with the instruc tio ns, m a y c a use ha rm ful inte rfe re nc e to ra d io c om m unic a tio ns.
Ho we ve r, the re is no g ua ra nte e tha t inte rfe re nc e will no t o c c ur in a p a rtic ula r insta lla tio n. If
this e q uip m e nt d o e s c a use ha rm ful inte rfe re nc e to ra d io o r te le visio n re c e p tio n, whic h c a n
b e d e te rm ine d b y turning the e q uip m e nt o ff a nd o n, the use r is e nc o ura g e d to try to c o rre c t
the inte rfe re nc e b y o ne o r m o re o f the fo llo wing m e a sure s:
•
•
•
Re o rie nt o r re lo c a te the re c e iving a nte nna .
Inc re a se the se p a ra tio n b e twe e n the e q uip m e nt a nd re c e ive r.
Co nne c t the e q uip m e nt into a n o utle t o n a c irc uit d iffe re nt fro m tha t to whic h the re c e ive r
is c o nne c te d .
• C o nsult yo ur d e a le r o r a n e xp e rie nc e d ra d io /TV te c hnic ia n fo r he lp .
If ne c e ssa ry, the use r sho uld c o nta c t the d e a le r o r a n e xp e rie nc e d ra d io / te le vision te c hnic ia n
fo r a d d itio na l sug g e stio ns. The use r m a y find the fo llo wing b o o kle t, p re p a re d b y the Fe d e ra l
Co m m unic a tio ns C o m m issio n, he lp ful: “Ho w to Id e ntify a nd Re so lve Ra d io -TV Inte rfe re nc e
Pro b le m s”. This b o o kle t is a va ila b le fro m the U.S. Go ve rnm e nt Printing Offic e , Wa shing to n, D.C.,
20402, Sto c k No . 004-000-00345-4.
50
|