2
3
Welcome
Thank.you.for.purchasing.a.Uniden.Multi-Handset.phone.
Note:.Illustrations.in.this.manual.are.used.for.explanation.purposes..Some.illustrations.in.this.manual.may.differ.from.
the.actual.unit..
As.an.Energy.Star®;.Partner,.Uniden.has.determined.that.this.product.or.product.models.meets.
the.Energy.Star®; guidelines for energy efficiency. Energy Star®;.is.a.U.S..registered.mark..
Uniden;.is.a.registered.trademark.of.Uniden.America.Corporation..AutoStandby,.DirectLink,.In-
tegriSound.and.Random.Code.are.trademarks.of.Uniden.America..
Accessibility
Uniden.provides.a.customer.service.hotline.for.accessibility.questions..If.you.have.a.disability.and.need.customer.
service.assistance.or.if.you.have.any.questions.about.how.Uniden’s.products.can.accommodate.persons.with.dis-
abilities,.please.call.the.accessibility.voice/TTY.line:.ꢀ-800-874-93ꢀ4..
A.representative.is.available.to.talk.to.you.M-F,.8:00.am.to.5:00.pm,.CST..After.hours,.you.can.leave.us.a.message,.
and.we.will.call.you.back..Information.is.also.available.on.our.website,.www.uniden.com,.under.the.“Accessibility”.
link.
4
Terminology.used.in.this.Manual
The.handset.is.not.in.use..If.the.handset.is.on.the.cradle.or.[ /flash].or.[ ].is.not.pressed,.no.line.
has.been.activated..No.dial.tone.is.present..
Standby
CID
Caller.ID.is.available.from.your.Telephone.provider.and.is.offered.to.users.on.a.subscription.basis..
With.this.service.and.a.display.on.your.cordless.phone,.you.will.be.able.to.see.the.incoming.caller.
information.such.as.name.and.phone.number..
CID.Deluxe.
or.Call.
Waiting.
Deluxe
Caller.ID.with.Call.Waiting.Deluxe.features.are.offered.by.your.Telephone.provider.with.a.monthly.
service.subscription..With.this.service.and.while.on.an.existing.phone.call,.you.can.use.additional.
menu.options.when.a.new.caller.rings.you..By.selecting.Menu.Options,.you.will.be.able.to.see.a.
Caller.ID.with.Call.Waiting.is.available.by.subscription.from.your.Telephone.provider..With.this.ser-
vice,.you.will.be.able.to.view.incoming.caller.information.while.on.a.call.with.another.user..This.will.
allow.you.the.ability.to.select.to.talk.to.this.user.and.put.your.existing.party.on.hold.or.make.the.
decision.to.ring.them.back..
CID/CW.or.
CIDCW
DirectLink
If.you.have.accessory.handsets.on.your.system,.you.can.use.two.handsets.as.2-way.radios..
Accessory.
or.Extra.
This.phone.system.is.expandable.and.will.support.a.total.of.ten.(ꢀ0).handsets.to.one.base..The.
accessory,.or.extra.handset,.is.a.handset.that.is.compatible.with.this.model..
Handsets
Apply.to.registered.handsets..If.you.change.something.under.the.global.menu,.you.change.it.for.all.
handsets..Only.one.handset.can.change.global.settings.at.a.time,.and.you.have.to.make.sure.the.
phone.is.not.currently.being.used..
Global.
settings
Station
Talk
Any.handset.or.the.base.
A.telephone.line.has.been.activated.on.the.handset.enabling.a.dial.tone..
5
Product.Overview
TRU9460.Features:
• 5.8GHz.DSS.Expandable.System
• Expands.up.to.ꢀ0.Handsets
• Caller.ID/Call.Waiting.Deluxe
• Advanced.Phonebook.Features:.
• Store.Up.to.ꢀ00.Names.for.each.hansdset
• Store.Up.to.2.Numbers.per.Name.(200.#’s.
Total)
• DirectLink™
• Room/Baby.Monitoring
• Handset.Speakerphones
• 20.Ringer.Options.on.Handset.(ꢀ0.Tones/ꢀ0.
Melodies)
• ꢀ0.Speed.Dial.Locations
• Last.3.Number.Redial
• Trilingual.Menu.Displays.(English,.Spanish.and.
French)
• Alphabetical.Search
• Personalized.Ring.by.Party
• Transfer.Single.Listing.or.Entire.Phonebook.
• Call.Transfer
• Conferencing
• Intercom
6
TRU9460.-.Parts.of.the.Phone
The.following.illustrations.show.you.all.of.the.different.parts.of.your.phone..
Handset
ꢀ. Handset.Antenna
2. Headset.Jack.Cover
3. Beltclip.Hole
1
2
6
7
4. Speakerphone.Speaker.and.Ringer
5. Handset.Battery.Compartment
6. New.Message.LED
7. Handset.Earpiece
8. LCD.Display
3
4
8
9. Soft.keys
ꢀ0. [ /flash] key (talk/flash)
ꢀꢀ. [ ].key.(phonebook)
9
10
11
14
15
16
tone
ꢀ2. [ ].key
def
1
4
7
abc
3
6
9
2
5
8
0
ꢀ3. [ ].key.(speaker)
ꢀ4. [ ].key.(up).
ꢀ5. [ ].key.(end.call)
ꢀ6. [ ].key.(caller.ID)
ꢀ7. [ ].key.(down)
17
ghi
mno
jkl
5
pqrs
tone
wxyz
tuv
12
13
oper
18
19
,
redial
pause
int com
hold
speaker
ꢀ8. [#].key.
20
21
22
ꢀ9. [redial/pause].key
20. [int’com/hold].key.(intercom/hold)
2ꢀ. Handset.Microphone
22. Handset.Charging.Contacts
7
Base
26
27
28
23
24
25
23. Base.Charging.Contacts
24. charge/in.use.LED.
25. [find hs] key (find handset)
26. DC.IN.9V.Jack
27. TELLINE.Jack
28. [Registration].key
8
Using.the.Interface
Reading.the.Handset.Display
The.handset.display.uses.icons.to.tell.you.the.status.of.your.phone..The.table.below.lists.the.icons.and.what.they.
mean..
Icon
Status
Description
Talk
The.privacy.icon.appears.when.Privacy.mode.is.turned.on..
Talk
The.mute.icon.appears.when.you.mute.the.handset..
に
The.speaker.icon.appears.when.the.handset.speaker.phone.is.in.
use..
Talk
Talk
Talk
This.icon.appears.when.T-coil.mode.is.turned.on.
The.talk.icon.appears.while.on.a.call..
Standby
The.ringer.off.icon.indicates.that.the.ringer.is.turned.off..
The.battery.icon.indicates.the.handset.battery.status:.empty,.low,.
medium,.and.full.
Standby/Talk
9
The.Standby.Screen
When.the.phone.is.in.standby,.the.handset.display.shows.the.following.items:
Ringer.off.icon.(when.the.ringer.is.off)/.day.of.the.week.and.time./.battery.icon
Handset.ID.and.Banner
Number.of.new.Caller.ID.calls.received.(If.there.are.no.new.Caller.ID.messages,.the.Handset.ID.
appears.here.)
SUN 12:00A
Handset #1
New CID: 5
REDIAL
MENU
Using.the.Four-way.Function.Key
Up
Your.handset.has.a.four-way.function.key.that.allows.you.to.move.
the.cursor.(or.highlighted.area).on.the.display.and.access.the.most.
commonly.used.features.at.the.touch.of.a.button..By.moving.this.
key.to.the.left,.you.open.the.Phonebook..Move.the.key.to.the.right.
to.access.Caller.ID.information..To.use.this.four-way.key,.place.your.
thumb.over.the.key.on.the.station.and.move.to.the.four.positions.to.
get.the.feel.of.how.it.moves.and.operates..
View the
phonebook
View the
Caller ID
Using.the.Handset.Menus
def
1
abc
3
2
To.open.the.menu,.press.the.MENU.soft.key..Highlight.the.option.you.
want.by.pressing.the.four-way.function.key..This.will.move.the.cursor;.
the.option.currently.highlighted.appears.in.reversed.out.text..Select.
the.highlighted.option.by.pressing.the.OK.soft.key..To.exit.the.menu.
and.return.to.standby,.press.[ ].on.the.handset.
Four-way
Function Key
Down
If.you.do.not.press.a.key.within.30.seconds,.the.phone.will.time.out.and.exit.the.menu..When.setting.Date.and.Time,.
the.time-out.period.is.extended.to.two.minutes..
Note:.For.GLOBAL.SETUP.and.DEREGISTRATION.menu.options,.make.sure.the.line.is.not.in.use.and.the.handsets.
are.within.range.of.the.base.
ꢀ0
Entering.Text.from.your.Phone
You.can.use.the.number.keypad.on.your.handset.to.enter.text.by.referring.to.the.letters.printed.on.each.number.key..
When you press the number key in a text entry field, the phone displays the first letter printed on the number key.
Press.the.number.key.twice.to.display.the.second.letter.and.three.times.to.display.the.third..Capital.letters.are.dis-
played first, then lower case letters, then the number on the key.
If two letters in a row use the same number key, enter the first letter, then use [right].or.[left].on.the.four-way.
function.key.to.move.the.cursor.to.the.next.position.to.enter.the.second.letter..For.example,.to.enter.Movies:.
ꢀ) Press.6.once.to.enter.M..
Number of times key is pressed
2) Use.[right].on.four-way.function.key.to.
move.the.cursor.to.the.right..
3) Press.6.six.times.to.enter.o..
4) Press.8.six.times.to.enter.v..
5) Press.4.six.times.to.enter.i..
6) Press 3 five times to enter e.
7) Press.7.eight.times.to.enter.s..
8) Press.the.OK.soft.key.to.end.your.text.en-
try..
If.you.make.a.mistake.while.entering.a.name,.use.
[right].or.[left].on.the.four-way.function.key.to.
move.the.cursor.to.the.incorrect.character..Press.
the.DELETE.soft.key.to.erase.the.wrong.character,.
and.then.enter.the.correct.character..To.delete.all.
characters,.press.and.hold.the.DELETE.soft.key.
ꢀꢀ
Installing.the.Phone
Choosing.the.Best.Location
When.choosing.a.location.for.your.new.phone,.here.are.
some.important.guidelines.you.should.consider:.
• The.location.should.be.close.to.both.a.phone.jack.
and.a.continuous.power.outlet.(one.which.is.not.con-
nected.to.a.switch)..
• The.base.and.handset.should.be.kept.away.from.
sources.of.electrical.noise.such.as.motors,.micro-
wave ovens, and fluorescent lighting.
• For.better.reception,.place.the.base.as.high.as.pos-
sible..
• The.base.should.be.placed.in.an.open.area.for.opti-
mum.range.and.reception..
• If.your.home.has.specially.wired.alarm.equipment.
connected.to.a.phone.line,.be.sure.that.installing.
the.system.does.not.disable.your.alarm.equipment..
If.you.have.questions.about.what.will.disable.alarm.
equipment,.contact.your.telephone.company.or.a.
qualified installer.
Correct
Note:.For.maximum.range:.
• Keep.the.antenna.free.of.obstruction.
• When.the.handset.is.not.in.use,.place.the.handset.in.an.upright.position.
• Do.not.hold.the.handset.where.you.would.block.the.signal..
• Metal.and.reinforced.concrete.may.affect.cordless.telephone.performance.
Incorrect
ꢀ2
Installing.the.Rechargeable.Battery
Use.only.the.Uniden.BT-446.rechargeable.battery.pack.supplied.with.your.cordless.telephone..
Follow.the.steps.below.to.install.a.battery:
ꢀ) Press in on the handset battery case cover (use the finger indention for a better grip) and slide the cover
downward.to.remove..
2) Plug.the.battery.cable.into.the.battery.jack..Be.sure.to.match.the.red.and.black.wires.to.the.label.near.the.
jack..The.cable.should.snap.into.place..Gently.pull.on.the.battery.cable..If.the.battery.connector.comes.lose,.
try.connecting.again.until.the.battery.snaps.into.place..
3) Place.the.battery.case.cover.back.on.the.handset.and.slide.it.upwards.until.it.clicks.into.place..
ꢀ3
Connecting.the.Base.and.Charging.the.Handset.
ꢀ) Connect.the.AC.adapter.to.the.DC.IN.9V.jack.
2) Connect.the.AC.adapter.to.a.continuous.power.supply.(i.e.,.an.outlet.that.is.not.controlled.by.a.switch)..
3) Close.the.handset.and.place.it.in.the.base.with.the.LCD.screen.facing.forward..
4) Make.sure.that.the.charge/in.use.LED.illuminates..If.the.LED.does.not.illuminate,.check.to.see.that.the.AC.
adapter.is.plugged.in.and.the.handset.makes.good.contact.with.the.base.charging.contacts..
5) Charge.your.handset.at.least.ꢀ5-20.hours.before.plugging.into.the.phone.line..
ꢀ4
Installing.the.Belt.Clip
ꢀ) Line.up.the.holes.on.each.side.of.the.handset..To.attach.the.belt.clip,.insert.into.the.holes.on.
each.side.of.the.handset..Press.down.until.it.clicks..
2) To.remove.the.belt.clip,.pull.either.side.of.the.belt.clip.to.release.the.tabs.from.the.holes.
Connecting.to.the.Phone.Line.
Once.the.handset.battery.pack.is.fully.charged,.connect.the.
telephone.line.cord.to.the.TEL.LINE.jack.and.to.a.telephone.
outlet..
Testing.the.connection
To test your connection, try making a call. If your call connects, the settings are fine. If your call does not connect,
check.the.following:
ꢀ) Check.the.AC.adapter.cord..Make.sure.it.is.securely.connected.to.the.DC.IN.connector.and.to.a.standard.AC.
power.outlet.
2) Check.to.make.sure.the.battery.is.fully.charged..(If.you.don’t.see.the.“battery.full”.icon,.check.to.make.sure.
the.battery.is.properly.connected.)
ꢀ5
Changing.the.Dial.Mode
Dial Mode
Tone
Pulse
Your.phone.can.communicate.with.the.telephone.network.in.two.different.ways:.tone.dial-
ing.or.pulse.dialing..These.days,.most.phone.networks.use.a.method.called.tone.dialing,.
so.your.phone.comes.programmed.for.tone.dialing..If.your.phone.company.uses.Pulse.
dialing,.you.will.need.to.change.your.phone’s.dial.mode..If.you.cannot.connect.to.the.tele-
phone.network,.please.follow.the.steps.below.to.modify.your.phone’s.settings:
BACK
DELETE
OK
ꢀ) Press.the.MENU.soft.key..Select.the.GLOBAL.SETUP.menu,.and.then.the.DIAL.MODE.submenu.
2) Scroll.[ ].to.select.PULSE..(The.initial.setting.is.Tone).
3) Press.the.OK soft key. You will hear a confirmation tone.
If.you.ever.need.to.change.the.dial.mode.back.to.Tone,.follow.the.same.procedure,.but.select.TONE.in.step.2.
ꢀ6
Basic.Setup
Selecting.a.Language
Your.phone.supports.three.languages:.English,.French.and.Spanish..Once.you.select.a.
language,.the.menus.on.the.phone.will.display.in.that.language..The.default.language.is.
English.
Handset Language
Engsh
Franユais
BACK
OK
Base Language
Franユais
ꢀ) Press.the.MENU.soft.key..Select.the.HANDSET.SETUP.menu,.and.then.the.
HANDSET.LANGUAGE.submenu.
BACK
OK
2) Move.the.cursor.to.choose.ENGLISH,.FRANÇAIS.(French),.or.ESPAÑOL.(Span-
ish).
3) Press.the.OK soft key. You will hear a confirmation tone.
Setting.the.Date.and.Time
To.change.the.day.and.time.shown.in.the.display,.follow.the.steps.listed.below..
Date & Time
1/01/2006
12:00AM[*=AM/PM]
Note:.If.you.don’t.press.any.keys.for.two.minutes.when.setting.the.date.and.time,.the.
BACK
SAVE
phone.will.exit.the.menu..
ꢀ) Press.the.MENU.soft.key..Select.the.GLOBAL.SETUP.menu,.and.then.the.DATE.&.TIME.submenu.
2) Use.the.four-way.key.to.move.the.cursor.to.highlight.the.month,.day,.year,.hours,.and.minutes...
To.change,.press.the.number.keypad..
tone
3) To.select.AM.or.PM,.press.[ ].,.then.press.the.SAVE soft key. You will hear a confirmation tone.
ꢀ7
Activating.Caller.ID.on.Call.Waiting.and.Call.Waiting.Deluxe
Call Waiting
On
Off
Your.phone.supports.Caller.ID.on.Call.Waiting.(CIDCW),.so.you.can.see.the.name.and.
number.of.someone.who.calls.when.you’re.already.on.the.line..Your.phone.also.supports.
Call.Waiting.Deluxe.(CWDX),.which.gives.you.a.choice.of.how.you.want.to.handle.a.wait-
ing.call..You’ll.need.to.subscribe.to.these.features.with.your.phone.company.before.you.
can.use.them..To.let.your.phone.support.these.features,.follow.the.steps.below:
BACK
DELETE
OK
ꢀ) Press.the.MENU.soft.key..Select.the.GLOBAL.SETUP.menu,.and.then.the.CALL.WAITING.submenu.
2) Move.the.cursor.to.select.ON.or.OFF.
3) If.you.select.ON,.CALL.WAIT.DELUXE.submenu.appears..Move.the.cursor.to.select.ON.or.OFF.
4) Press.the.OK soft key. You will hear a confirmation tone.
Activating.Personal.Ring
You.can.assign.special.ring.tones.to.anyone.in.your.phonebook..When.your.phone.gets.a.call,.it.looks.up.the.Caller.
ID.information.in.your.phonebook..If.you’ve.assigned.a.personal.ring.to.that.number,.the.phone.uses.it.so.you.know.
who.is.calling..To.turn.on.personal.ring,.follow.these.steps:
ꢀ) Press.the.MENU.soft.key..Select.the.HANDSET.SETUP.menu,.and.then.the.PERSONAL.RING.submenu.
2) Move.the.cursor.to.select.ON.or.OFF.
3) Press.the.OK soft key. You will hear a confirmation tone.
ꢀ8
Activating.the.Key.Touch.Tone
Key.Touch.Tone.is.the.tone.your.keypad.makes.when.keys.are.pressed..You.can.turn.this.
tone.on.or.off.
Key Touch Tone
Off
ꢀ) Press.the.MENU.soft.key..Select.the.HANDSET.SETUP.menu,.and.then.the.KEY.
BACK
DELETE
OK
TOUCH.TONE.submenu.
2) Move.the.cursor.to.select.ON.or.OFF.
3) Press.the.OK soft key. You will hear a confirmation tone.
Adjusting.the.LCD.Contrast
Contrast.adjusts.the.handset.LCD.brightness..Choose.one.from.the.ꢀ0.levels.for.opti-
mum.viewing.
LCD Contrast
‑
+
ꢀ) Press.the.MENU.soft.key..Select.the.HANDSET.SETUP.menu,.and.then.the.LCD.
OK
CONTRAST.submenu.
2) Press.[
/
].to.adjust.the.contrast.of.the.LCD.(ꢀ0.levels.)
3) Press.the.OK soft key. You will hear a confirmation tone.
ꢀ9
Setting.up.Voice.Mail
If.you.subscribe.to.a.voice.mail.service,.you.can.use.your.phone.to.access.your.voice.mailbox..The.new.message.
LED flashes whenever you have messages waiting in your voice mailbox. If you have programmed your access
number.into.your.phone,.you.can.simply.press.the.[ ].soft.key.to.access.your.voice.mail..When.you.subscribe.to.the.
service,.your.voice.mail.provider.provides.you.with.the.access.number.and.the.required.voice.mail.signaling.tone.
Setting.the.Voice.Mail.Signaling.Tone
Your telephone service provider should provide you with the specifics of your voice mail service upon your enroll-
ment..If.you.are.having.trouble.with.your.message.waiting.indicator.on.your.phone.not.illuminating.when.you.have.
waiting messages, you will need to contact your service provider and inquire as to which type of message notification
signal--either.Frequency.Shift.Keying.(FSK).or.Stutter.Dial.Tone.(SDT)--their.service.uses..
If.your.voice.mail.service.uses.a.FSK.message.signal.to.alert.you.of.a.new.voice.mail.message,.you.will.need.to.turn.
off.the.Voice.Mail.Tone..If.your.voice.mail.service.uses.a.SDT.message.signal.to.alert.you.of.new.voice.mail.messag-
es,.you.can.leave.the.Voice.Mail.Tone.on.
Follow.the.instructions.below.to.set.up.your.cordless.phone.settings:
ꢀ) Press.the.MENU.soft.key..Select.the.GLOBAL.SETUP.menu,.then.the.VOICE.MAIL.TONE.submenu.
2) Move.the.cursor.to.set.the.voice.message.indication.(SDT.message.signal).to.ON.or.OFF.
3) Press.the.OK soft key. You hear a confirmation tone.
20
Programming.One-Touch.Voice.Mail.Access
You.can.program.your.voice.mail.access.number.to.the.[ ].soft.key.on.a.station.so.you.can.get.your.messages.at.
the.touch.of.a.button..Your.voice.mail.service.provider.will.supply.you.with.the.access.number..This.number.may.be.
simply.a.phone.number.
To.edit.the.voice.mail.number,.follow.the.steps.below:
ꢀ) Press.the.MENU.soft.key..Select.HANDSET.SETUP.menu,.then.EDIT.VOICE.
Edit V�mail No.
。
MAIL.submenu.
2) Enter.your.personal.access.number.(up.to.20.digits).
BACK
OK
3) If.you.need.to.have.the.phone.wait.before.sending.the.next.digits,.press..
[redial/pause].on.the.handset.to.insert.a.two-second.pause.in.the.dialing.sequence..For.a.longer.pause,.
press.the.key.multiple.times..A.P.appears.in.the.display.each.time.you.press.the.key.and.each.pause.counts.
as.one.digit.
4) Press.the.OK soft key when you are finished.
Resetting.the.Voice.Message.Waiting.Indicator
When you receive a new voice mail message, the LED on the top of the handset flashes. In the event your message
alert.tone.gets.out.of.sync.with.your.phone.company’s.voice.messaging.system,.you.can.reset.back.to.its.original.“no.
messages.waiting”.state..To.reset,.with.the.phone.in.standby.mode,.press.and.hold.[find hs].on.the.base.until.the.
paging.sound.stops.(about.5.seconds).
2ꢀ
Adding.Accessory.Handsets
Your.phone.supports.up.to.ten.(ꢀ0).handsets,.including.any.handsets.supplied.with.your.phone..Accessory.handsets.
do.not.need.to.be.connected.to.a.phone.jack..You.can.now.place.a.fully-featured.cordless.handset.anywhere.AC.
power.is.available.to.connect.the.handset.charger..
Compatible.Handsets
Your.phone.is.compatible.with.the.following.Uniden.5.8.GHz.Digital.Accessory.Handsets:.TCX805,.TCX905,.
TCX400,.TCX440,.TCX450,.TWX977.and.ELX500..(Please.visit.our.website.at.www.uniden.com.for.the.most.up-to-
date.list.of.compatible.handsets..If.you.purchase.an.accessory.or.extra.handset,.you.must.register.the.handset.to.the.
original.or.main.base.before.use..Accessory.handsets.will.not.operate.until.they.are.registered.
Charge.the.Accessory.Handset
The.handset.is.powered.by.a.rechargeable.battery.pack..The.battery.recharges.automatically.when.the.handset.is.
placed.in.the.charger..
ꢀ) Connect.the.AC.adapter.to.the.DC.IN.9V.jack.and.to.a.standard.
ꢀ20V.AC.wall.outlet.
2) Set.the.charger.on.a.desk.or.tabletop,.and.place.the.handset.in.
the.charger.with.the.keypad.facing.forward.
3) Make.sure.that.the.charge/in.use.LED.illuminates..If.the.LED.
does.not.illuminate,.check.to.see.that.the.AC.adapter.is.plugged.
in.and.the.handset.makes.good.contact.with.the.base.charging.
contacts.
4) Charge.the.handset.battery.pack.for.at.least.ꢀ5-20.hours.before.
using your new cordless telephone for the first time.
22
Registering.TCX805/TCX905.Accessory.or.Extra.Handsets
If.you.purchase.an.accessory.handset,.you.need.to.register.the.handset.before.use..Only.one.handset.can.be.reg-
istered.at.a.time..Handsets.supplied.with.the.phone.are.registered.to.the.base.by.the.factory..When.charged,.pre-
registered.handsets.display.a.handset.ID.number..Handsets.that.have.not.been.registered.display.MODELS.VARY!.
PLACE.HANDSET.ON.THE.BASE.FOR.REGISTRATION.OR.REFER.TO.OWNER’S.MANUAL..(If.an.accessory.
handset.has.ever.been.registered.to.a.base,.you.must.reset.the.handset.before.you.can.register.it.to.a.new.base..
When.you.register.an.extra.handset.to.the.base,.the.handset.ID.will.be.assigned.
Models vary!
Place Handset
on the base for
registration
or refer to
Owner's Manual
↔
.. ..
ꢀ) Before.registering.the.TCX805/TCX905.accessory.or.other.extra.handset,.the.battery.pack.MUST.be.charged.
for.ꢀ5-20.hours.
2) Place.the.handset.in.the.base.charging.cradle.to.begin.registration.
3) While.the.handset.is.registering,.HANDSET.REGISTERING.will.appear.in.the.LCD..When.REGISTRATION.
COMPLETE.is.displayed;.the.handset.has.been.registered.to.the.base..If.REGISTRATION.FAILED.appears,.
please.try.these.steps.again.
Registering.Other.Compatible.Handsets.
ꢀ) With.the.base.in.standby,.press.[Registration].key.on.the.bottom.of.the.base.for.5.seconds.until.the.charge/
in use LED flashes.
2) On.the.handset,.press.and.hold.[#].until.you.hear.a.beep..
3) While.the.handset.is.registering,.HANDSET.REGISTERING.will.appear.in.the.LCD..When.REGISTRATION.
COMPLETE.is.displayed;.the.handset.has.been.registered.to.the.base..If.REGISTRATION.FAILED.appears,.
please.try.these.steps.again.
23
Resetting.the.Handsets
If you want to register a handset to a different base or replace a handset with another one, you must first clear the
existing.registration.data..To.clear,.please.follow.these.steps:.
Are You Sure?
Yes
ꢀ) Press.the.MENU.soft.key..Select.the.DEREGISTERATION.submenu.
2) ARE.YOU.SURE?.appears..Move.the.cursor.to.select.YES..Press.the.OK.soft.
BACK
DELETE
OK
key.
To.clear.other.handset.information,.please.follow.these.steps:
ꢀ) From.the.handset,.press.and.hold.[ ].and.[#].for.more.than.5.seconds..Select.the.
Deregister HS
Yes
No
DEREGISTER.HS.submenu.
2) Move.the.cursor.to.select.the.handset.ID.to.be.de-registered.from.the.list,.and.
BACK
DELETE
OK
then.press.the.OK.soft.key.
3) DEREGISTER.HS.appears..Move.the.cursor.to.select.YES..Press.the.OK.soft.key.
4) ARE.YOU.SURE?.appears..Move.the.cursor.to.select.YES,.and.then.press.the.OK.soft.key..You.will.hear.a.
confirmation tone.
Base.Unavailable.(Handset.Only)
To.clear.the.base.registration.data.in.the.handset,.please.follow.these.steps:
Base Unavailable
Yes
No
ꢀ) Press.and.hold.[ ].and.[#].for.more.than.5.seconds..Select.the.BASE.UNAVAIL-
ABLE.submenu.
BACK
DELETE
OK
2) BASE.UNAVAILABLE.appears..Move.the.cursor.to.select.YES,.and.then.press.the.
OK.soft.key..
3) ARE.YOU.SURE?.appears..Move.the.cursor.to.select.YES..Press.the.OK.soft.key.
24
Setting.up.the.Phonebook.
Your.phone.allows.you.to.store.up.to.2.numbers.per.name.and.up.to.ꢀ00.names.in.your.phonebook.in.the.handset..
Your.phone.shares.memory.between.your.phonebook.and.CID.entries..Once.you.store.ꢀ00.phonebook.entries,.CID.
information.will.not.be.stored.and.will.only.display.at.time.of.new.incoming.calls..When.Phonebook.entries.are.full,.
you.will.hear.a.beep.and.MEMORY.FULL.appears..You.cannot.store.any.additional.names.and.numbers.unless.you.
delete.some.of.the.existing.ones.
You.can.also.use.the.Phonebook.or.speed.dial.locations.to.store.a.group.of.numbers.(up.to.32.digits).that.you.may.
need.to.enter.once.your.call.connects..This.is.referred.to.as.Chain.Dialing.
Creating.Phonebook.Entries
To.store.names.and.numbers.in.your.Phonebook,.please.follow.these.steps:
<Phonebook>
Total: 0
ꢀ) When.the.phone.is.in.standby.mode,.press.[ ].(on.the.left.side.of.the.four-way.key).
2) To.create.a.new.phonebook.entry,.press.the.NEW.soft.key..Edit.Name.appears.
Search[A‑Z/
OPTIONS
/
NEW
]
BACK
3) Enter.the.name.for.this.entry.(Edit.Name)..
Use.the.keypad.to.enter.a.name.for.this.entry;.the.name.can.contain.up.to.ꢀ6.
enter.a.name.for.this.entry,.your.phone.will.store.this.entry.as.No.Name..Press.the.
OK soft key when you are finished.
Edit Name
。
。
BACK
OK
4) Enter.the.number.for.this.entry.(Edit.Number.1)..
Edit Number 1
Once.you.have.stored.a.name,.EDIT.NUMBERꢀ.appears.next..Use.the.number.
keypad,.[right].or.[left].on.the.four-way.function.key,.or.the.DELETE.soft.key.to.
enter.the.phone.number.ꢀ;.the.phone.number.can.contain.up.to.32.digits..If.you.
need.the.phone.to.pause.between.digits.when.it’s.dialing.(for.example,.to.enter.an.
BACK
OK
extension.or.an.access.code),.press.[redial/pause].to.insert.a.two-second.pause..You.will.see.a.P.in.the.
display..You.can.also.use.more.than.one.pause.together.if.two.seconds.is.not.long.enough..Each.pause.
counts.as.one.digit..Press.the.OK soft key when you are finished. .
EDIT.NUMBER.2.appears.next..Use.the.same.procedure.when.entering.the.phone.number.ꢀ.to.enter.the.
phone.number.2..Press.the.OK soft key when you are finished.
25
5) Assign.a.personal.ring.tone.for.this.entry.(Personal.Ring)..
Personal Ring
No Selection
Flicker
You.can.attach.a.personalized.ring.tone.to.each.phonebook.entry;.the.phone.will.
use.this.ring.tone.when.this.person.calls..Move.the.cursor.to.highlight.one.of.the.
20.different.ring.tone.options..As.you.highlight.each.ring.tone,.you.will.hear.a.
sample.of.that.tone..When.you.hear.the.ring.tone.you.want.to.use,.press.the.OK.
BACK
DELETE
OK
soft.key..If.you.do.not.want.to.use.a.personal.ring.tone.for.this.phonebook.entry,.select.the.NO.SELECTION.
option,.and.the.phone.will.use.your.standard.ring.tone.setting..
6) Assign.this.entry.to.a.Speed.Dial.number.(Speed.Dial)..
Speed Dial
No lection
Your.phone.has.ꢀ0.speed.dial.numbers,.0.to.9..Move.the.cursor.to.select.the.
SPD1:Empty
DELETE
speed.dial.number.you.want.to.assign.to.this.phonebook.entry,.and.press.the.OK.
soft.key..Select.NO.SELECTION.if.you.do.not.want.to.assign.this.entry.to.a.speed.
BACK
OK
dial.number..Press.the.OK.soft.key.
7) You will hear a tone confirming that the new phonebook entry has been stored, and DONE! appears in the
display..
Note:.When.the.shared.memory.is.full,.the.oldest.Caller.ID.message.is.overwritten.
Finding.a.Phonebook.Entry
Phonebook.entries.are.stored.in.alphabetical.order..To.scroll.through.the.phonebook,.press.[ ].and.then.press..
[
].or.[ ].on.the.four-way.function.key..Press.and.hold.[ ].or.[ ].on.the.four-way.function.key.to.scroll.through.the.
display.quickly..When.viewing.the.phonebook.entry,.use.the.[→].soft.key.or.[right].on.the.four-way.function.key.to.
display.the.DIAL.NUMBER.2..To.show.the.personal.ring.and.speed.dial,.press.the.[→].soft.key.or.[right].on.the.four-
way.function.key.
You.can.also.use.the.letters.on.the.number.keys.to.jump.to.a.name.that.starts.with.that.letter..Press.[ ].and.a.num-
ber.key.(0,.2-9) once for the first letter, twice for the second letter, and so on. The phonebook jumps to the first entry
that.begins.with.the.letter.you.entered;.you.can.then.use.[ ].or.[ ].on.the.four-way.function.key.to.scroll.to.other.en-
tries..For.example,.to.search.for.an.entry.beginning.with.the.letter.M,.press.6.once.
To.close.the.phonebook,.press.[ ].on.the.handset..If.you.are.looking.up.a.phonebook.entry.during.a.call.and.want.to.
close.the.phonebook,.press.the.BACK.soft.key.instead.of.[ ]..
26
Editing.Phonebook.Entries
ꢀ) Press.[ ].to.open.
2) Use.[ ].or.[ ].on.the.four-way.function.key.to.scroll.through.the.phonebook.entries..When.you.come.to.the.
entry.you.want.to.edit,.press.the.OPTIONS.soft.key.
3) Move.the.cursor.to.select.EDIT.SELECTION.submenu..Press.the.OK.soft.key.
4) Follow.the.steps.for.Creating.a.Phonebook.Entry.on.page.25..If.you.do.not.wish.to.change.the.information.at.
any.step,.simply.press.the.OK.soft.key.to.go.to.the.next.step.
Storing.Caller.ID.or.Redial.Numbers.in.the.Phonebook
You.can.store.Caller.ID.records.or.redial.numbers.in.the.phonebook.so.you.can.use.them.later..Go.to.the.Caller.ID.or.
redial.list.and.select.the.number.you.want.to.store..(If.the.Caller.ID.information.did.not.include.the.number,.then.you.
will.not.be.able.to.store.it.)
ꢀ) When.the.phone.is.in.standby,.press.[ ].(on.the.right.side.of.the.four-way.key).to.open.the.Caller.ID.list.or..
[redial/pause].to.open.the.redial.list.
2) Use.[ ].or.[ ].on.four-way.function.key.to.scroll.through.the.Caller.ID.records.or.redial.numbers..When.you.
come.to.the.information.you.want.to.store,.press.the.STORE.soft.key..<.ADD.TO.PHONEBK.>.appears.
3) Move.the.cursor.to.select.NEW.ENTRY.submenu.for.new.entry,.or.STORE.&.EDIT.for.addition.to.an.existing.
phonebook.location..Press.the.OK.soft.key..
For.the.additional.phone.number,.if.the.phone.location.is.already.full,.THIS.PERSON’S.PHONE.NUMBER.
MEMORY.IS.FULL..appears.in.the.display..The.number.will.not.be.stored.
Note:.
• If.the.Caller.ID.message.was.received.as.a.private.or.unknown.number,.or.the.message.does.not.have.the.
number,.you.cannot.store.the.message.in.the.phonebook..If.it.was.received.as.private.or.unknown.name,.the.
message.will.be.stored.as.<NO.NAME>.
• If.the.memory.is.full,.the.oldest.Caller.ID.message.will.be.erased.from.the.Caller.ID.list.when.you.store.a.Call-
er.ID.message.in.the.phonebook..
27
Erasing.Phonebook.Entries
You.can.erase.individual.phonebook.entries.or.erase.all.the.phonebook.entries.at.once.
<Options>
Delete Selection
ꢀ) When.the.phone.is.in.standby,.press.[ ]..
2) Use.[ ].or.[ ].on.four-way.function.key.or.the.number.keypad.to.select.desired.
BACK
DELETE
OK
phonebook.entry,.then.press.the.OPTIONS.soft.key.
3) Move.the.cursor.to.select.DELETE.SELECTION..Press.the.OK.soft.key.
4) ARE.YOU.SURE?.appears.in.the.display..Select.YES,.and.then.press.the.OK.soft.key.
5) You will hear a confirmation tone, and DELETED! appears in the display.
Deleting.All.Phonebook.Entries.
ꢀ) When.the.phone.is.in.standby,.press.[ ]..Press.the.OPTIONS.soft.key.
2) Move.the.cursor.to.select.DELETE.ALL,.and.press.the.OK.soft.key.
3) ARE.YOU.SURE?.appears.in.the.display..Select.YES.and.then.press.the.OK soft key. You will hear a confir-
mation.tone,.and.DELETED!.appears.in.the.display..
Copying.Phonebook.Entries.to.another.Station
You.can.transfer.stored.phonebook.entries.from.one.handset.to.another.without.having.to.re-enter.names.and.
numbers..You.can.transfer.one.phonebook.entry.at.a.time.or.all.phonebook.entries.at.once.
ꢀ) When.the.phone.is.in.standby,.press.[ ]..
<Options>
CopSelection
2) Use.[ ].or.[ ].on.four-way.function.key.or.the.number.keypad.to.select.desired.
Edit Selection
BACK
phonebook.entry,.then.press.the.OPTIONS.soft.key.
DELETE
OK
3) Move.the.cursor.to.select.COPY.SELECTION..Press.the.OK.soft.key..TO.WHICH.
UNIT?.will.appear..
4) Scroll.through.the.list.until.the.station.you.wish.to.copy.listings.to.is.highlighted..Press.the.OK.soft.key..
The.phonebook.entries.will.be.transferred.to.the.designated.handset..During.the.copy.process,.the.receiving.handset.
shows.RECEIVING.and.the.Banner.name.of.the.sending.handset..When.the.transfer.is.completed,.DONE!.appears.
28
Copying.all.the.phonebook.entries.at.once:
ꢀ) When.the.phone.is.in.standby,.press.[ ]..Press.the.OPTIONS.soft.key.
2) Move.the.cursor.to.select.COPY.ALL..Press.the.OK.soft.key..TO.WHICH.UNIT?.will.appear.
3) Scroll.through.the.list.until.the.station.you.wish.to.copy.listings.to.is.highlighted..Press.the.OK.soft.key..
4) ARE.YOU.SURE?.appears..Select.YES.or.NO..Press.the.OK.soft.key..
The.phonebook.entries.will.be.transferred.to.the.designated.handset..During.the.copy.process,.the.receiving.
handset.shows.RECEIVING.and.the.Banner.name.of.the.sending.handset..When.the.transfer.is.completed,.
DONE!.appears.
Note:.
• If.your.Phonebook.contains.ꢀ00.entries,.you.cannot.store.any.new.phonebook.entries..You.will.hear.a.
beep,.and.NOT.ENOUGH.MEMORY.IN.RECEIVING.UNIT.appears.on.the.display.
• If.the.selected.handset.is.out.of.range.or.data.transfer.is.canceled,.UNAVAILABLE.appears.in.the.display..
Phonebook.listings.will.not.be.transferred.
29
Customizing.Your.Phone
Changing.the.Handset.Banner
Each.handset.will.display.a.banner.name.once.it.is.registered.to.the.base..
Banner Display
Moms'phone #1
The.default.banner.is.Handset.#ꢀ,.Handset.#2,.etc..You.can.change.the.name.your.
phone.displays.by.changing.the.banner.display..If.you.have.more.than.one.handset,.you.
can.use.the.banner.name.to.identify.your.handset.during.handset-to-handset.functions.
like.intercom.and.DirectLink..The.banner.lets.you.customize.the.name.your.handset.dis-
����������
BACK
DEETE
OK
plays..The.name.will.be.displayed.on.the.LCD.screen.during.Standby,.Intercom,.Intercom.Hold,.Room/Baby.Monitor,.
and.Copy.Phonebook.operations..The.banner.name.will.be.displayed.on.the.receiving.handset.as.well.
ꢀ) Press.the.MENU.soft.key..
2) Select.the.HANDSET.SETUP.menu,.and.then.the.BANNER.DISPLAY.submenu.
3) Use.the.keypad.or.the.DELETE.soft.key.to.enter.or.edit.the.banner.name..(See.page.ꢀꢀ.for.detailed.instruc-
tions.on.entering.text.)
4) Press.the.OK soft key. You will hear a confirmation tone.
30
Selecting.a.Ring.Tone
You.may.choose.from.ꢀ0.melodies.or.ꢀ0.tones.for.your.phone’s.primary.ring.tone..Each.station.can.use.a.different.
ring.tone.or.melody..The.available.ring.tones.are.listed.below:
Melodies
Ringers
Flicker
Beethoven’s.Symphony.#9.[Beethoven9]
For.Elise.[Elise]
Clatter
We.Wish.You.A.Merry.Christmas.[Merry-.Xmas]
Home.Sweet.Home.[Hm.Swt.Hm]
Lorri.Song.#6.[Lorri.Song]
Soft.Alert
Wake.Up
Lighting.Bug
Bebop.(Beep.Boop)
Tone.Board
Chirp
When.the.Irish.Eyes.Are.Smiling.[Irish.Eyes]
Aura.Lee
Let.Me.Call.You.Sweet.Heart.[Sweetheart]
Star.Spangled.Banner.[Star.Spngl]
Old.MacDonald.[Old.MacDld]
Party.Clap
Reminder
ꢀ) Press.the.MENU.soft.key..Select.the.HANDSET.SETUP.menu,.and.then.the.RINGER.TONES.submenu.
2) Move.the.cursor.to.highlight.a.ring.tone..As.each.ring.tone.is.highlighted,.you.will.
Ringer Tones
hear.a.sample.of.the.ring.tone.
Clatter
3) When.you.hear.the.tone.you.want.to.use,.press.the.OK.soft.key..You.will.hear.a.
BACK
DELETE
OK
confirmation tone.
3ꢀ
Activating.AutoTalk
AutoTalk
AutoTalk.allows.you.to.answer.the.phone.simply.by.removing.the.handset.from.the.cra-
On
Off
dle..You.do.not.have.to.press.any.keys.to.answer.the.call.
BACK
DELETE
OK
ꢀ) Press.the.MENU.soft.key.
2) Select.the.HANDSET.SETUP.menu,.and.then.the.AUTOTALK.submenu.
3) Select.ON.or.OFF,.and.press.the.OK soft key. You will hear a confirmation tone.
Activating.Any.Key.Answer
Any Key Answer
Off
Any.Key.Answer.allows.you.to.answer.the.phone.by.pressing.any.key.in.the.number.key-
pad.
BACK
DELETE
OK
ꢀ) Press.the.MENU.soft.key..
2) Select.the.HANDSET.SETUP.menu,.and.then.the.ANY.KEY.ANSWER.submenu.
3) Select.ON.or.OFF,.and.then.press.the.OK soft key. You will hear a confirmation tone.
32
Using.your.Phone
From.a.cordless.handset
From.a.handset.speaker.phone
ꢀ) Remove.the.handset.from.the.charging.cradle.
2) Press.[ /flash].
ꢀ) Remove.the.handset.from.the.charging.cradle.
2) Press.[ ].
3) Listen.for.the.dial.tone.
4) Dial.the.number.
3) Listen.for.the.dial.tone.
4) Dial.the.number.
Making.a.
call
OR
OR
ꢀ) Remove.the.handset.from.the.charging.cradle.
2) Dial.the.number..
ꢀ) Remove.the.handset.from.the.charging.cradle.
2) Dial.the.number..
3) Press.[ /flash].
3) Press.[ ].
ꢀ) Pick.up.the.handset..(If.AutoTalk.is.on,.the.
phone.will.answer.when.you.remove.the.hand-
set.from.the.charging.cradle.)
ꢀ) Pick.up.the.handset.
2) Press.[ ].
Answering.a.
call
2) Press.[ /flash]...
(If.Any.Key.Answer.is.on,.you.can.also.press.
any.key.in.the.number.keypad.).
Hanging.up
ꢀ) Press.[ ].
ꢀ) Press.[ ].
33
Making.a.call.from.the.Phonebook
ꢀ) When.the.phone.is.in.standby,.press.[ ].to.open.the.phonebook.
2) Scroll.through.the.list.with.the.[ ].or.[ ] on the four-way function keys until you find the phonebook entry you
3) Press.[ /flash].on.the.handset.
Or.
ꢀ) Press.[ /flash].on.the.handset.
2) Press.[ ].to.open.the.phonebook.
3) Scroll.through.the.list.with.the.[ ].or.[ ] on the four-way function keys until you find the phonebook entry you
4) Press.the.DIAL.soft.key.to.dial.the.number.
tone
To.insert.a.ꢀ.in.front.of.a.phonebook.number.to.enable.long.distance.dialing,.press.[ ]..
Making.a.call.with.Speed.Dial
ꢀ) When.the.phone.is.in.standby,.press.and.hold.the.number.key.[0]-[9].until.the.assigned.phonebook.entry.ap-
pears.in.the.display.
2) Press.[ /flash].or.[ ].on.the.handset.to.dial.the.number.
Switching.to.the.Handset.Speakerphone.during.a.Call
To.switch.a.normal.call.to.the.speakerphone,.press.[ ].on.the.handset..To.switch.from.a.speakerphone.call.to.a.nor-
mal.call,.press.[ ].
34
Using.Caller.ID,.Call.Waiting.and.Redial.Lists
If.you.subscribe.to.Caller.ID.from.your.phone.company,.your.phone.will.show.you.the.caller’s.phone.number.and.
name.(if.available).whenever.a.call.comes.in..If.you.subscribe.to.both.Call.Waiting.and.Caller.ID,.the.phone.also.
shows.you.the.name.and.the.number.of.any.call.that.comes.in.while.you.are.on.the.line.
Note:
• If.you.answer.a.call.before.the.Caller.ID.message.is.received.(for.example,.before.the.second.ring),.the.Caller.
ID.message.will.not.appear.
• When.the.call.is.received.via.a.Telephone.Company.that.does.not.offer.Caller.ID.service,.the.caller’s.phone.
number.and.name.will.not.appear..(This.includes.some.international.calls.)
• When.the.Call.is.via.a.private.branch.exchange.(PBX),.the.caller’s.phone.number.and.name.may.not.appear.
Using.the.Caller.ID.List.
You.can.store.up.to.ꢀ00.Caller.ID.numbers.in.each.handset..Your.phone.shares.memory.between.your.Phonebook.
and.Caller.ID.entries..When.the.shared.memory.is.full.and.when.you.store.a.new.phonebook.entry,.the.oldest.Caller.
ID.message.is.overwritten..Once.you.reach.your.maximum.phonebook.entries.of.ꢀ00,.Caller.ID.information.will.not.
be.stored.(but.it.will.still.display.when.the.call.comes.in)..
To.open.the.Caller.ID.list,.press.[ ].(on.the.right.side.of.the.four-way.key)..The.phone.will.show.the.total.number.of.
stored.Caller.ID.records..Use.[ ].or.[ ] to scroll through the list, or enter a letter on the keypad to jump to the first
caller.ID.name.that.starts.with.that.letter..To.scroll.quickly.through.the.list,.press.and.hold.[ ].or.[ ].on.the.four-way.
function.key.
Note:.The.number.of.calls.from.the.same.Caller.ID.will.appear.next.to.the.time.to.indicate.that.this.is.an.unread.mes-
sage..Once.you.view.the.new.message,.the.number.will.disappear.
35
Making.a.call.from.a.Caller.ID.Record
ꢀ) When.the.phone.is.in.standby,.press.[ ].(on.the.right.side.of.the.four-way.key).to.open.the.Caller.ID.list.
2) Use.[ ].or.[ ] to find the Caller ID record you want to dial.
tone
3) To.add.(or.delete).a.“ꢀ”.at.the.beginning.of.the.displayed.phone.number,.press.[ ]..To.add.(or.remove).the.
stored.area.code.to.the.displayed.phone.number,.press.[#]..
4) Press.[ /flash].or.[ ].on.the.handset.to.dial.the.number.
Or
ꢀ) Press.[ /flash].or.[ ].on.the.handset.
2) Press.[ ].to.open.the.Caller.ID.list.
3) Use.[ ].or.[ ] to find the Caller ID record you want to dial.
tone
4) To.add.(or.delete).a.“ꢀ”.at.the.beginning.of.the.displayed.phone.number,.press.[ ]..To.add.(or.remove).the.
stored.area.code.to.the.displayed.phone.number,.press.[#].
5) Press.the.DIAL.soft.key.to.dial.the.number.
Deleting.Caller.ID.Numbers.
To.delete.only.one.Caller.ID.number,.go.to.the.Caller.ID.list.and.select.the.number.you.want.to.delete..Press.the.DE-
LETE soft key. When the phone asks you to confirm, select YES.
To.delete.all.the.Caller.ID.numbers,.go.to.the.Caller.ID.list.and.press.the.DELETE.soft.key..Select.YES.when.asked.
if.you.want.to.DELETE.ALL..
Note:.When.you.delete.a.Caller.ID.number,.you.delete.it.permanently.
36
Using.Call.Waiting.and.Call.Waiting.Deluxe
If.you.have.Call.Waiting.service.and.a.second.call.comes.in.when.you.are.on.the.phone,.a.call.waiting.tone.will.
sound..Press.[ /flash].on.the.handset.to.accept.the.waiting.call..There.is.a.short.pause,.and.then.you.will.hear.the.
new.caller..To.return.to.the.original.caller,.press.[ /flash].on.the.handset.
Note:.You.must.subscribe.through.your.telephone.provider.to.receive.Call.Waiting.services.
Your.phone.gives.you.new.options.for.Call.Waiting.Deluxe..At.the.touch.of.a.button,.you.can.place.the.caller.on.hold,.
send.them.to.your.voice.mail.service,.or.conference.them.into.your.current.call..You.must.subscribe.to.Call.Waiting.
and.Call.Waiting.Deluxe.to.use.these.features..Not.all.features.are.available.in.all.areas..Check.with.your.telephone.
provider.for.details.
Note:.
• To.active.features,.select.the.CALL.WAITING.submenu.and.the.CALL.WAIT.DELUXE.submenu.to.ON..See.
• If.you.don’t.choose.a.CWDX.option.within.30.seconds,.the.phone.returns.to.the.call.
• To.return.to.the.call,.press.the.BACK.soft.key.
ꢀ) When.you.receive.a.Call.Waiting.call,.press.the.CWDX.soft.key.
2) Move.the.cursor.or.use.the.number.keypad.[1-7].to.select.an.option.
2:Tell Busy
Ask.to.Hold.—.A.prerecorded.message.states.that.user.will.be.available.shortly,.
and.the.call.is.place.on.hold.
3:Forward
BACK
DELETE
OK
Tell.Busy.—.A.prerecorded.message.tells.the.caller.you.are.busy,.and.the.waiting.
call.is.disconnected.
Forward.—.The.caller.is.sent.to.your.voice.mail.box,.if.available.
Answer/Drop.— Disconnects the first call, and connects to the new caller.
Conference.— Starts a conference call with your first and second callers.
Drop.First/Drop.Last.— During a conference call, allows you to choose to drop the first or last caller.
3) Press.the.OK soft key. A confirmation screen will appear, and the phone returns to the call.
37
Redialing.a.Number
You.can.quickly.redial.the.last.3.numbers.dialed.on.each.handset..
ꢀ) With.the.phone.in.standby,.press.the.REDIAL.soft.key.or.[redial/pause].on.the.handset.to.open.the.redial.list..
2) Use.[
/
].to.scroll.through.the.redial.list..
3) When you find the number you want to dial, press [ /flash].or.[ ].on.the.handset.to.dial.the.number.
Or
ꢀ) Press.[ /flash].or.[ ].on.the.handset.to.dial.the.number.
2) Press.[redial/pause].on.the.handset.to.open.the.redial.list..
3) Use.[
4) Press.the.DIAL.soft.key.to.dial.the.number.
Note:.
/
].to.scroll.through.the.redial.list..
• If the number exceeds 32 digits, only the first 32 digits are retained in redial memory.
• If.the.redial.memory.is.empty,.you.will.hear.a.beep.
Deleting.a.Redial.Record
If.you.want.to.delete.a.phone.number.from.the.redial.list,.follow.the.steps.below:
ꢀ) With.the.phone.in.standby,.press.the.REDIAL.soft.key.or.[redial/pause].on.the.handset.
2) Use.[
/
].to.scroll.through.the.redial.list.
3) When you find the redial number you want to delete, press the DELETE.soft.key.
4) Select.YES,.and.press.the.OK.soft.key..The.redialed.number.is.deleted.
38
Adjusting.the.Ringer,.Earpiece.and.Speaker.Volume
Adjusting.the.Ringer.Volume.
You.can.choose.from.three.ringer.volume.settings.on.the.handset.(off,.low,.and.high)..
With.the.phone.in.standby,.use.[
/
].on.the.four-way.function.key.to.adjust.the.ringer.
volume.
Adjusting.the.Speaker.Volume.
Ear.speaker:.You.can.choose.from.six.volume.levels.for.the.earpiece.speaker..To.ad-
just.the.earpiece.volume.while.on.a.call,.press.[ ].(to.make.it.louder).or.[ ].(to.make.
it.softer)..
def
1
abc
jkl
3
2
Speaker:.You.can.choose.from.six.volume.levels.for.the.handset.speakerphone..To.
adjust.the.speaker.volume.while.on.a.call,.press.[ ].(to.make.it.louder).or.[ ].(to.
make.it.softer)..
mno
T-coil.(Handset.only)
The.T-coil.feature,.used.by.hearing.aid.users,.reduces.the.magnetic.noise.interference.generated.by.digital.cordless.
phones..Individuals.using.hearing.aides.will.turn.off.the.hearing.aid.microphone.to.avoid.interference.issues.and.turn.
on.T-coil..By.toggling.back.and.forth.between.T-coil.on/off.and.the.hearing.aid.microphone.on/off,.you.avoid.exces-
sive.interference.and.are.able.to.hear.clearly.with.the.hearing.aid.device.
ꢀ) Press.the.MENU.soft.key..
2) Select.the.HANDSET.SETUP.menu,.and.then.the.T-COIL.submenu.
3) Move.the.cursor.to.select.ON.or.OFF.
4) Press.the.OK soft key. You will hear a confirmation tone.
Note:.Using.the.T-coil.feature.may.shorten.your.battery’s.talk.time,.please.set.to.off.when.not.using.this.feature.
39
Finding.a.Lost.Handset
To.locate.a.misplaced.handset,.press.[find hs].on.the.base.when.the.phone.is.in.standby..All.registered.handsets.
will.beep.for.60.seconds,.and.PAGING.appears.on.the.handset.display..To.cancel.paging,.press.any.key.on.the.
found.handset.or.press.[find hs].on.the.base..
Note:.If.the.battery.pack.is.completely.drained,.the.handset.will.not.beep.when.paging.
Using.Hold,.Conference.and.Transfer
Placing.a.Call.on.Hold
ꢀ) During.a.call,.press.[int’com/hold].on.the.handset.to.place.the.caller.on.hold..If.you.leave.a.caller.on.hold.for.
more.than.ten.seconds,.the.display.screen.will.read,.HOLD.
2) To.return.to.the.party.on.hold,.press.[ /flash].or.[ ].on.a.handset..The.phone.will.return.to.the.holding.party..
Note:
• You.can.only.place.a.caller.on.hold.for.5.minutes..Once.5.minutes.has.passed,.that.party’s.line.will.be.discon-
nected.and.the.phone.will.return.to.standby.
• While.a.call.is.on.hold,.Caller.ID.and.Call.Waiting.cannot.be.received.
Conferencing
If.you.have.more.than.one.handset,.up.to.three.people.can.participate.in.a.conference.call..A.three-way.conference.
call.consists.of.an.outside.line.and.two.handsets..You.can.easily.join.a.call.already.in.progress..
ꢀ) Press.[ /flash].or.[ ].to.join.the.call..
2) To.hang.up,.return.the.handset.to.the.cradle.or.press.[ ].on.the.handset..The.other.party.will.still.be.connect-
ed.to.the.call.
40
Transferring.a.Call
Hold/Transfer
All
Handset
You.can.transfer.a.call.from.one.station.to.another.
ꢀ) During.a.call,.press.[int’com/hold].
#2
BACK
DELETE
OK
2) Use.[ ].or.[ ].to.select.the.station.you.want.to.transfer.the.call.to,.then.press.the.
OK.soft.key...
The.call.will.automatically.be.placed.on.hold,.and.a.paging.tone.sounds..To.cancel.the.transfer,.press.[ /flash].
or.[ ].on.the.initiating.station.
3) When.another.station.accepts.the.transferred.call,.you.will.be.disconnected..If.you.want.to.rejoin.the.call,.
press.[ /flash].or.[ ].on.the.handset.again.
Answering.a.Transferred.Call.
When.a.station.receives.a.call.transfer,.it.sounds.a.paging.tone.and.shows.the.ID.of.the.station.that.is.paging..To.ac-
cept.the.call.transfer:.
ꢀ) Press.[ /flash],.[int’com/hold],.or.the.ANSWER.soft.key.from.the.handset.
2) To.speak.to.the.caller,.press.[ /flash].or.[ ].on.the.receiving.handset.
If you have multiple handsets, only the first handset to answer the transfer page will be connected to the call. If the
transfer.page.is.not.picked.up.within.one.minute,.the.operation.will.be.canceled.
4ꢀ
Using.Special.Features
Muting.the.Ringer.(One.Call.Only)
While.a.handset.is.ringing,.press.[ ].or.the.MUTE.soft.key.on.the.handset.to.mute.the.ringer.for.this.call..The.phone.
will.ring.again.normally.on.the.next.call..(The.handset.must.be.off.the.cradle.to.mute.the.ringer.)
Muting.the.Microphone
Mute.turns.off.the.microphone.so.the.caller.can.not.hear.you..The.display.shows.the.MUTE.ON.icon.while.the.micro-
phone.is.muted..
ꢀ) While.you.are.on.a.call,.press.the.MUTE.soft.key.
2) MUTE.ON.will.appear.in.the.display.for.2.seconds,.but.the. .icon.will.appear.and.remain.in.the.display.until.
に
the.feature.is.turned.off.
3) To.cancel.muting,.press.the.MUTE.soft.key.again..MUTE.OFF.appears.and. .disappears.in.the.display.
に
Privacy.Mode
If.you.don’t.want.another.station.to.interrupt.you.while.on.a.call,.you.can.turn.on.privacy.mode..As.long.as.your.sta-
tion.is.in.privacy.mode,.other.stations.won’t.be.able.to.join.your.call.or.make.any.calls.of.their.own.
ꢀ) While.on.a.call,.press.the.PRIVACY.soft.key.
2) PRIVACY.MODE.ON.will.appear.in.the.display.for.2.seconds,.but.the. .icon.will.appear.and.remain.in.the.dis-
play.until.the.feature.is.turned.off..Other.stations.will.not.be.able.to.make.a.call.and.their.display.will.list.UN-
AVAILABLE..
To.turn.Privacy.off,.press.the.PRIVACY.soft.key.again..PRIVACY.MODE.OFF.appears.
42
Using.the.DirectLink.Feature
A.pair.of.handsets.(or.two.pairs.of.handsets.at.one.time).can.function.as.two-way.radios..This.fea-
ture.is.called.DirectLink.and.will.not.interfere.with.the.base’s.ability.to.make.or.receive.telephone.
calls.while.in.use..To.activate,.you.must.set.both.handsets.to.the.DirectLink.feature..While.using.
this.feature,.these.two.handsets.will.not.be.able.to.make.or.receive.normal.phone.calls.until.this.
operation.is.canceled;.however,.other.handsets.will.function.normally..
Note:.If.the.party.is.out.of.range,.NO.SIGNAL.appears.in.the.display.and.the.operation.will.be.
canceled.
ꢀ) Press.the.MENU.soft.key..Select.DIRECTLINK.MODE.menu.
2) Press.the.OK.soft.key..The.display.shows.TO.ENTER.DIRECTLINK.MODE.PRESS..
[ENTER].
3) Press.the.ENTER soft key. You will hear a confirmation tone, and DIRECTLINK MODE
COMPLETE.appears.in.the.display.
To enter
DirectLink mode
press [ENTER]
BACK
DELETE
ENTER
43
Making.a.DirectLink.Call
ꢀ) To.call.another.handset.with.DirectLink,.press.the.DirectLink.soft.key..
2) Move.the.pointer.to.select.the.handset.you.want.to.call,.and.press.the.OK.soft.key..If.the.handset.is.out.of.
range.or.not.in.DirectLink.operation,.the.display.shows.OUT.OF.RANGE.
To.exit.DirectLink,.press.the.CANCEL.soft.key.
3) On.the.receiving.handset,.press.the.ANSWER.soft.key.or.[ /flash].
Exiting.a.DirectLink.Call.
To.exit.the.DirectLink.feature.and.return.to.standby,.press.the.CANCEL.soft.key.and.then.press.the.OK.soft.key..DI-
RECTLINK.MODE.CANCEL.appears.in.the.display.
Intercom
Making.an.Intercom.Page
You.can.use.the.intercom.to.talk.to.another.station.without.using.the.phone.line..
ꢀ) With.the.phone.in.standby,.press.[int’com/hold].on.the.handset.
2) Use.[ ].or.[ ].to.select.the.handset.you.want.to.talk.with,.and.then.press.the.OK.soft.key..If.you.select.ALL,.
all.other.registered.handsets.will.be.paged..An.intercom.tone.sounds..To.cancel.intercom,.press.[ ].on.either.
handset.
44
Answering.an.Intercom.Page
When.the.intercom.page.tone.sounds,.the.display.will.show.the.ID.of.the.station.that.is.
paging..
Intercom
「「 Handset #1
ANSWER
ꢀ) Press.[ /flash],.[int’com/hold],.or.the.ANSWER.soft.key..Or.press.a.number.key,.
tone
[
],.or.[#].(when.Any.Key.Answer.is.enabled),.or.pick.up.the.handset.from.the.
cradle.(when.AutoTalk.is.on).
2) To.hang.up.an.intercom.page,.press.the.END.soft.key.or.[ ].on.either.handset.
Note:.
• If.the.party.is.busy,.the.handset.returns.to.standby..
• If.the.party.is.out.of.range,.UNAVAILABLE.appears.in.the.display.and.the.operation.will.be.canceled.
• If.you.receive.an.outside.or.intercom.call.or.page.while.selecting.the.other.handset,.the.operation.is.canceled.
• If.you.do.not.select.a.handset.within.30.seconds,.the.operation.will.be.canceled..
• If.the.party.does.not.answer.within.one.minute,.the.operation.is.canceled.
Room/Baby.Monitor
This.feature.allows.you.to.monitor.sounds.in.another.room..Place.a.
handset.in.the.room.you.wish.to.monitor;.it.will.function.as.a.micro-
phone..Another.handset.can.be.set.to.function.as.a.remote.speaker,.al-
lowing.you.to.monitor.sounds.in.the.room..
ꢀ) Press.the.MENU.soft.key.and.enter.the.Room.Monitor.menu..TO.
WHICH.UNIT?.appears.
2) Select.the.handset.you.want.to.monitor.by.using.[ ].or.[ ].
45
3) Press.the.OK.soft.key..MONITOR.appears,.and.you.hear.sounds.in.the.room.
To which unit?
Handset #3
where.the.handset.is.installed.
4) To.turn.off.the.Room.Monitor,.press.the.END.soft.key.or.[ ].on.either.handset.or.
BACK
DELETE
OK
return.the.handset.to.the.cradle.
If.you.want.to.prevent.other.handsets.from.monitoring.the.station,.press.the.MENU.soft.
key.on.the.handset..Select.the.HANDSET.SETUP.menu,.and.then.the.ROOM.MONITOR.
submenu..Select.OFF.and.press.the.OK.soft.key.
Monitoring
」」 Handset #2
END
Note:.
• This.feature.only.works.when.both.handsets.are.within.range.of.the.base.
• If.the.party.is.out.of.range,.UNAVAILABLE.appears.in.the.display.and.the.operation.will.be.canceled.
• While.a.pair.of.handsets.is.in.Room/Baby.Monitoring,.they.cannot.be.used.to.make.or.receive.calls;.however,.
other.handsets.can.still.make.and.receive.calls.normally.
Tone.Dialing.Switch.Over
If.your.telephone.company.requires.pulse.dialing,.you.can.switch.to.tone.dialing.after.the.call.connects..This.feature.
is.useful.when.you.need.tone.dialing.to.use.automated.menu.systems,.such.as.telephone.bank.tellers,.telephone.
prescription refills, customer support menus, etc. If your phone is set to pulse dialing, make your call normally. Once
tone
your.call.connects,.press.[ ].on.the.handset..Any.digits.you.enter.from.then.on.will.be.sent.as.tone.dialing..When.
this.call.ends,.the.phone.automatically.returns.to.pulse.dialing.
46
Installing.the.Optional.Headset
Your.phone.may.be.used.with.an.optional.headset..To.use.this.feature,.insert.the.head-
set.plug.into.the.headset.jack..Your.phone.is.ready.for.hands-free.conversations...
Seven-Digit.Dialing
If.you.can.make.a.local.call.by.dialing.only.7.digits.(instead.of.ꢀ0),.you.can.program.
your.local.area.code.into.your.phone..If.you.get.a.call.from.within.your.area.code,.you’ll.
only.see.the.7-digit.phone.number..If.you.get.a.call.from.outside.your.area.code,.you’ll.
see.all.ꢀ0.digits..To.enter.an.area.code,.follow.the.steps.below:
ꢀ) Press.the.MENU.soft.key..Select.the.GLOBAL.SETUP.menu,.and.then.the.AREA.CODE.submenu.
2) Use.the.number.keypad.(0-9).to.enter.a.3-digit.area.code..If.an.area.code.has.already.been.stored,.it.will.ap-
pear.in.the.display..Press.the.DELETE.soft.key.to.delete.the.stored.code,.and.then.enter.a.new.one.
3) Press.the.OK soft key. You will hear a confirmation tone.
47
Maintenance
Specifications
Operating.Temperature
0°.C.to.50°.C.(32°.F.to.ꢀ22°.F)
Base:.AD-800
AC.Adapter.Part.Number
Input.Voltage
Charging.Cradle:.AD-0005
Base:.ꢀ20V.AC,.60.Hz
Charging.Cradle:.ꢀ20V.AC,.60.Hz
Base:[email protected]
Output.Voltage
Charging.Cradle:[email protected]ꢀ0mA
Battery.Part.Number
Capacity
BT-446
Notes:
• Use.only.the.supplied.AD-800.and.AD-0005.AC.adapters.
• Do.not.use.any.other.AC.adapter.
• Do.not.place.the.power.cord.where.it.creates.a.trip.hazard.or.where.it.could.become.chafed.and.create.a.
fire or electrical hazard.
• Do.not.place.the.base.in.direct.sunlight.or.subject.it.to.high.temperatures.
48
Battery.Replacement.and.Handling.
With.average.use,.your.phone’s.battery.should.last.approximately.one.year..To.order.replacement.batteries,.please.
contact.Uniden’s.Parts.Department..The.contact.information.is.listed.on.the.back.cover.page..
Cleaning.the.Battery.Contacts
To.maintain.a.good.charge,.clean.the.charging.contacts.on.the.handset.
once.a.month..Dampen.a.cloth.with.plain.water..Gently.rub.the.damp.cloth.
over.the.charging.contacts.until.all.visible.dirt.is.removed..Dry.the.contacts.
thoroughly.before.returning.the.handset.to.the.charging.cradle.
Caution:.Do.not.use.paint.thinner,.benzene,.alcohol,.or.other.chemical.
products..Doing.so.may.discolor.the.surface.of.the.telephone.and.damage.
the finish.
Warning
To avoid the risk of personal injury or property damage from fire or electrical shock, use only Uniden AD-800 (9V
350mA).and.AD-0005.AC.adapters.and.Uniden.BT-446.battery.pack.with.your.phone..
Caution:.
• Use only the specified Uniden battery pack BT-446.
• Do.not.remove.the.batteries.from.the.handset.to.charge.them..
• Never throw the battery into a fire, disassemble, or heat them.
• Do.not.remove.or.damage.the.battery.casing..
• A.replacement.Uniden.adapter.or.battery.may.be.purchased.by.calling.Uniden’s.Parts.department..See.back.
49
Low.Battery.Alert.
When.the.battery.pack.is.very.low,.the.phone.is.programmed.to.eliminate.functions.in.or-
der.to.save.power..When.Low.Battery.appears.in.the.display.and.the.phone.is.in.standby,.
none.of.the.keys.will.operate..If.you.are.on.a.call,.complete.your.conversation.as.quickly.
as.possible,.and.return.the.handset.to.the.charging.cradle.
Low Battery
The.battery.pack.needs.to.be.charged.when.the.empty.battery.icon.appears.
Talk.and.Standby.Times
With.average.use,.your.handset.battery.provides.approximately.5.hours.of.talk.time.and.approximately.7.days.of.
standby.time..When.your.handsets.are.not.being.used.and.are.left.off.of.their.charging.cradles,.the.battery.will.grad-
ually.discharge..You.can.achieve.optimum.battery.life.and.performance.by.returning.the.handset.to.the.charging.
cradle.after.each.use..If.the.handset.is.left.off.of.the.charging.cradle,.the.actual.talk.time.duration.will.be.reduced.re-
spective.to.the.amount.of.time.the.handset.is.off.of.the.charging.cradle..
50
Troubleshooting
Resetting.the.Handset
You.may.need.to.reset.your.handset.in.the.following.instances:.
• You.lose.a.handset.and.purchase.a.new.one..When.you.try.and.register.to.your.existing.base.you.get.regis-
tration.failure..
• You.are.unable.to.register.any.handsets.to.the.base..
• You.had.a.base.which.needed.to.be.exchanged.by.the.manufacturer..When.you.register.your.existing.hand-
sets.to.the.base,.the.handsets.say.#3.and.#4,.but.you.only.have.2.handsets.
• When.you.are.instructed.to.by.the.one.of.the.manufacturer’s.call.center.representatives..
To.reset,.do.the.following:.
ꢀ) Press.and.hold.[ ].and.[#].for.more.than.5.seconds..Select.DEREGISTER.HS..
2) WHICH.HANDSET?.appears..Select.the.handset.that.you.want.to.de-register,.and.press.the.OK.soft.key.
3) ARE.YOU.SURE?.appears..Select.YES,.and.press.the.OK soft key. You will hear a confirmation tone. The
handset.will.clear.its.registration.information.from.the.base,.and.then.delete.its.own.base.information.
MODELS.VARY!.PLACE.HANDSET.ON.THE.BASE.FOR.REGISTRATION.OR.REFER.TO.OWNER’S.MANUAL..To.
If.the.handset.cannot.contact.the.base,.it.will.display.OUT.OF.RANGE..Make.sure.the.handset.is.in.range.of.the.
base.and.the.base.is.connected.to.power.
Note:.It.is.also.possible.to.reset.the.handset.back.to.its.original.factory.settings..All.changes.including.Caller.ID.infor-
mation.will.be.erased..For.more.information.on.resetting.the.handset.back.to.factory.settings.and.when.you.need.to.
do.this,.see.www.uniden.com.or.call.our.Customer.Service.Hotline..See.back.cover.page.for.contact.information.
5ꢀ
Resetting.the.Handset.without.the.Base
If.your.original.base.is.not.available.for.some.reason.(for.example,.it.is.lost.or.somehow.incapacitated),.you.can.still.
reset.the.handset.and.use.it.with.another.base..
ꢀ) Press.and.hold.[ ].and.[#].for.more.than.5.seconds..
2) Move.the.cursor.to.select.the.BASE.UNAVAILABLE.and.then.press.the.OK.soft.
Base Unavailable
Yes
No
key..BASE.UNAVAILABLE.appears.
3) Move.the.cursor.to.select.YES,.and.then.press.the.OK.soft.key..ARE.YOU.SURE?.
BACK
DELETE
OK
appears..
4) Move.the.cursor.to.select.YES,.and.then.press.the.OK.soft.key...
You will hear a confirmation tone. The handset will delete its own base information without trying to contact
the.base..When.the.base.information.is.deleted,.the.handset.displays.MODELS.VARY!.PLACE.HANDSET.
ON.THE.BASE.FOR.REGISTRATION.OR.REFER.TO.OWNER’S.MANUAL..Register.the.handset.to.the.new.
Changing.the.Digital.Security.Code
The digital security code is an identification code used to connect the handset and the base. Your unit ships from the
manufacturer.with.a.preset.security.code..Resetting.this.code.is.not.normally.necessary..In.the.rare.situation.that.you.
suspect.another.cordless.telephone.is.using.the.same.security.code.or.if.you.are.instructed.to.change.this.code.by.a.
manufacturer’s.Call.Center.Representative,.you.can.change.the.code.by:
ꢀ. Perform.“Resetting.the.Handset”.for.all.of.your.handsets..
Traveling.Out.of.Range
During.a.call,.if.you.move.your.handset.too.far.away.from.your.base,.noise.may.increase..If.you.pass.the.range.limits.
of.the.base,.you.will.hear.a.beep.and.see.OUT.OF.RANGE.on.the.display,.and.then.the.handset.returns.to.standby..
52
Common.Issues
If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve
Symptom
Suggestion
The.charge/in.use.LED.won’t.
illuminate.when.the.handset.is.
placed.in.the.cradle..
• Make.sure.the.AC.adapter.is.plugged.into.the.base.or.the.charger.(if.you.
have.more.than.one.handset).and.wall.outlet.
• Make.sure.the.handset.is.properly.seated.in.the.cradle.
• Make.sure.the.charging.contacts.on.the.handset.are.clean..
The.audio.sounds.weak.
• Move.the.handset.and/or.base.away.from.metal.objects.or.appliances.and.
try.again.
• Make.sure.that.you.are.not.too.far.from.the.base..
Can’t.make.or.receive.calls.
• Make.sure.that.you.are.not.too.far.from.the.base..
• Make.sure.the.line.is.not.in.use..If.an.outside.call.is.already.using.a.line,.
you.cannot.use.that.line.to.make.another.outside.call.
• Check.both.ends.of.the.base.telephone.line.cord.
• Make.sure.the.AC.adapter.is.plugged.into.the.base.and.wall.outlet.
• Disconnect.the.AC.adapter.and.the.backup.battery.and.reconnect.
The.handset.doesn’t.ring.or.
receive.a.page.
• Make.sure.that.you.are.not.too.far.from.the.base..
• Charge.the.battery.in.the.handset.for.at.least.ꢀ5-20.hours.by.placing.the.
handset.on.the.base.or.charging.cradle.
Severe.noise.interference.
• Keep.the.handset.away.from.microwave.ovens,.computers,.remote.control.
toys,.wireless.microphones,.alarm.systems,.intercoms,.room.monitors,.
fluorescent lights, and electrical appliances.
• Move.to.another.location.or.turn.off.the.source.of.interference..
53
Symptom
Suggestion
The.Caller.ID.does.not.
display..
• The.call.was.placed.through.a.switchboard..
• Call.your.telephone.provider.to.verify.your.Caller.ID.service.is.current..
There.may.be.a.problem.with.your.Caller.ID.service..
You.cannot.register.the.
handset.at.the.base..
• Charge.the.battery.pack.in.the.handset.for.ꢀ5-20.hours.
• Make.sure.if.you.have.not.stored.ꢀ0.handsets.already.
The.handset.doesn’t.commu-
nicate.with.other.handsets..
• Make.sure.that.you.have.registered.all.handsets..
An.extra.handset.can’t.join.the.
conversation.
• Make.sure.there.are.not.2.handsets.already.using.the.conference.feature..
• Make.sure.that.another.station.is.not.in.privacy.mode..
The.Room.Monitor.feature.
does.not.work..
• Make.sure.to.place.the.handset(s).within.the.range.of.the.base.
• Make.sure.that.Room.Monitor.feature.is.turned.on..
54
Liquid.Damage.
Moisture.and.liquid.can.damage.your.cordless.phone..Follow.the.suggestions.below.if.your.phone.gets.wet:.
Exterior
If.the.handset.or.base.is.exposed.to.moisture.or.liquid,.but.only.the.exterior.plastic.housing.is.affected,.wipe.off.the.
liquid,.and.use.as.normal.
Interior
If.moisture.or.liquid.has.entered.the.plastic.housing.(i.e..liquid.can.be.heard.in.the.phone.or.liquid.has.entered.the.
handset.battery.compartment.or.vent.openings.on.the.base):
Handset:
ꢀ. Remove.the.battery.cover.and.leave.it.off.for.ventilation..
2. Disconnect.the.battery.pack..Leave.the.battery.cover.off.and.the.battery.pack.disconnected.for.at.least.3.
days..
3. Once.the.handset.is.completely.dry,.reconnect.the.battery.pack.and.the.battery.cover..
4. Recharge.the.handset's.battery.pack.for.ꢀ5.to.20.hours.before.using..
IMPORTANT:.You.must.unplug.the.telephone.line.while.recharging.the.battery.packs.to.avoid.charge.interruption..
Base:.
ꢀ. Disconnect.the.AC.adapter.from.the.base,.cutting.off.electrical.power..
2. Disconnect.the.telephone.cord.from.the.base..
3. Let.dry.for.at.least.3.days.
CAUTION:.DO.NOT.use.a.microwave.oven.to.speed.up.the.drying.process..This.will.cause.permanent.damage.to.
the.handset,.base.and.the.microwave.oven..After.following.these.steps,.if.your.cordless.telephone.does.not.work,.
55
Precautions!.
Before.you.read.anything.else,.please.observe.the.following:
Warning!.
Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical
shock,.or.damage.to.the.unit,.DO.NOT.expose.this.unit.to.rain.or.moisture..
Rechargeable.Nickel-Metal-Hydride.Battery.Warning.
• This.equipment.contains.a.rechargeable.Nickel-Metal-Hydride.battery..
• The rechargeable batteries contained in this equipment may explode if disposed of in a fire.
• Nickel.is.a.chemical.known.to.state.of.California.to.cause.cancer..
• Do.not.short-circuit.the.battery..
• Do.not.charge.the.rechargeable.battery.used.in.this.equipment.in.any.charger.other.than.the.one.designed.
to charge this battery as specified in the owner’s manual. Using another charger may damage the battery or
cause.the.battery.to.explode..
Rechargeable.Batteries.Must.Be.Recycled.or.Disposed.of.Properly.
The exclamation point within an equilater-
al triange is intended to alert the user to the
presence of important operating and mainte-
nance (servicing) instructions in the literature
accompanying the appliance.
!
56
Uniden.works.to.reduce.lead.content.in.our.PVC.coated.cords.in.our.products.and.accessories.
Warning!.
The.cords.on.this.product.and/or.accessories.contain.lead,.a.chemical.known.to.the.State.of.California.to.cause.birth.
defects.or.other.reproductive.harm..Wash.hands.after.handling.
Important.Safety.Instructions.
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire,
electric.shock.and.injury.to.persons,.including.the.following:.
ꢀ. Do.not.use.this.product.near.water,.for.example,.near.a.bath.tub,.wash.bowl,.kitchen.sink.or.laundry.tub,.in.a.
wet.basement.or.near.a.swimming.pool..
2. Avoid.using.a.telephone.(other.than.a.cordless.type).during.an.electrical.storm..There.may.be.a.remote.risk.of.
electric.shock.from.lightning..
3. Do.not.use.the.telephone.to.report.a.gas.leak.in.the.vicinity.of.the.leak..
4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may
explode..Check.with.local.authorities.for.possible.battery.disposal.instructions..
5. Do.not.disassemble.any.component.of.this.product..
SAVE.THESE.INSTRUCTIONS
CAUTION.
Risk.of.explosion.if.battery.is.replaced.by.an.incorrect.type..Dispose.of.used.batteries.according.to.the.instructions..Do.not.open.or.mutilate.the.battery,.
and.disconnect.the.battery.before.shipping.this.product..
57
The.FCC.Wants.You.To.Know.
Please.follow.instructions.for.repairing,.if.any.(e.g..battery.replacement.
section);.otherwise.do.not.substitute.or.repair.any.parts.of.the.device.
except as specified in this manual. Connection to party line service is
subject.to.state.tariffs..Contact.the.state.public.utility.commission,.public.
service.commission.or.corporation.commission.for.information..This.
equipment.is.hearing.aid.compatible.
This. equipment. complies. with. Part. 68. of. the. FCC. rules. and. the.
requirements.adopted.by.the.ACTA..On.the.bottom.of.this.equipment.is.
a label that contains, among other information, a product identifier in the
format.US:AAAEQ##TXXXX..If.requested,.this.number.must.be.provided.
to.the.telephone.company.
Should.you.experience.trouble.with.this.equipment,.please.contact.
Uniden.customer.service.at.800-297-ꢀ023..If.the.equipment.is.causing.
harm.to.the.telephone.network,.the.telephone.company.may.request.that.
you.disconnect.the.equipment.until.the.problem.is.resolved..
An applicable Universal Service Order Codes (USOC) certification for the
jacks.used.in.this.equipment.is.provided.(i.e.,.RJꢀꢀC).in.the.packaging.
with.each.piece.of.approved.terminal.equipment..A.plug.and.jack.used.
to.connect.this.equipment.to.the.premises.wiring.and.telephone.network.
must.comply.with.the.applicable.FCC.Part.68.rules.and.requirements.
adopted.by.the.ACTA..A.compliant.telephone.cord.and.modular.plug.is.
provided.with.this.product..It.is.designed.to.be.connected.to.a.compatible.
modular.jack.that.is.also.compliant..See.installation.instructions.for.
details.
NOTICE:.According.to.telephone.company.reports,.AC.electrical.surges,.
typically.resulting.from.lightning.strikes,.are.very.destructive.to.telephone.
equipment.connected.to.AC.power.sources..To.minimize.damage.from.
these.types.of.surges,.a.surge.arrestor.is.recommended.
Changes.or.modifications.to.this.product.not.expressly.approved.by.
Uniden,.or.operation.of.this.product.in.any.way.other.than.as.detailed.by.
the.owner’s.manual,.could.void.your.authority.to.operate.this.product.
The.REN.is.used.to.determine.the.number.of.devices.that.may.be.
connected.to.a.telephone.line..Excessive.RENs.on.a.telephone.line.
may.result.in.the.devices.not.ringing.in.response.to.an.incoming.call..In.
most but not all areas, the sum of RENs should not exceed five (5.0).
To.be.certain.of.the.number.of.devices.that.may.be.connected.to.a.line,.
as.determined.by.the.total.RENs,.contact.the.telephone.provider..For.
products.approved.after.July.23,.200ꢀ,.the.REN.for.this.product.is.part.
of the product identifier that has the format US:AAAEQ##TXXXX. The
digits.represented.by.##.are.the.REN.without.a.decimal.point.(e.g.,.03.is.
a.REN.of.0.3)..For.earlier.products,.the.REN.is.separately.shown.on.the.
label.
This.device.complies.with.part.ꢀ5.of.the.FCC.rules..Operation.is.subject.
to.the.following.two.conditions:.(ꢀ).This.device.may.not.cause.harmful.
interference,.and.(2).This.device.must.accept.any.interference.received,.
including.interference.that.may.cause.undesired.operation..Privacy.of.
communications.may.not.be.ensured.when.using.this.phone.
To.insure.the.safety.of.users,.the.FCC.has.established.criteria.for.
the.amount.of.radio.frequency.energy.various.products.may.produce.
depending.on.their.intended.usage..This.product.has.been.tested.
and.found.to.comply.with.the.FCC’s.exposure.criteria..For.body.worn.
operation,.the.FCC.RF.exposure.guidelines.were.also.met.when.used.
with.the.Uniden.accessories.supplied.or.designed.for.this.product..Use.
of.other.accessories.may.not.ensure.compliance.with.FCC.RF.exposure.
guidelines.and.should.be.avoided.
If.this.equipment.causes.harm.to.the.telephone.network,.the.telephone.
company.will.notify.you.in.advance.that.temporary.discontinuance.
of.service.may.be.required..But.if.advance.notice.isn’t.practical,.the.
telephone.company.will.notify.the.customer.as.soon.as.possible..Also,.
you will be advised of your right to file a complaint with the FCC if you
believe.it.is.necessary.
The.telephone.company.may.make.changes.in.its.facilities,.equipment,.
operations. or. procedures. that. could. affect. the. operation. of. the.
equipment..If.this.happens.the.telephone.company.will.provide.advance.
notice.in.order.for.you.to.make.necessary.modifications.to.maintain.
uninterrupted.service.
58
Radio.Interference.
I.C..Notice
Radio.interference.may.occasionally.cause.buzzing.and.humming.in.
your.cordless.handset,.or.clicking.noises.in.the.base..This.interference.
is.caused.by.external.sources.such.as.TV,.refrigerator,.vacuum.cleaner,.
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If
these.noises.continue.and.are.too.distracting,.please.check.around.your.
home.to.see.what.appliances.may.be.causing.the.problem..In.addition,.
we.recommend.that.the.base.not.be.plugged.into.a.circuit.that.also.
powers.a.major.appliance.because.of.the.potential.for.interference..Be.
certain.that.the.antenna.on.the.unit.is.fully.extended.when.needed..In.
the.unlikely.event.that.you.consistently.hear.other.voices.or.distracting.
transmissions.on.your.phone,.you.may.be.receiving.radio.signals.from.
another.cordless.telephone.or.other.source.of.interference..If.you.cannot.
eliminate.this.type.of.interference,.you.need.to.change.to.a.different.
channel.
Terminal.Equipment
NOTICE:.This.equipment.meets.the.applicable.Industry.Canada.Terminal.
Equipment Technical Specifications. This is confirmed by the registration
number. The abbreviation, IC, before the registration number signifies
that.registration.was.performed.based.on.a.Declaration.of.Conformity.
indicating that Industry Canada technical specifications were met. It does
not.imply.that.Industry.Canada.approved.the.equipment.
NOTICE:.The.Ringer.Equivalence.Number.(REN).for.this.terminal.
equipment.is.marked.on.the.equipment.itself..The.REN.assigned.to.
each.terminal.equipment.provides.an.indication.of.the.maximum.number.
of.terminals.allowed.to.be.connected.to.a.telephone.interface..The.
termination.on.an.interface.may.consist.of.any.combination.of.devices.
subject.only.to.the.requirement.that.the.sum.of.the.Ringer.Equivalence.
Numbers of all the devices does not exceed five.
Finally,.it.should.be.noted.that.some.cordless.telephones.operate.at.
frequencies.that.may.cause.interference.to.nearby.TVs.and.VCRs..
To.minimize.or.prevent.such.interference,.the.base.of.the.cordless.
telephone.should.not.be.placed.near.or.on.top.of.a.TV.or.VCR..If.
interference.is.experienced,.moving.the.cordless.telephone.farther.away.
from.the.TV.or.VCR.will.often.reduce.or.eliminate.the.interference..
RADIO.EQUIPMENT
The.term.“IC:”.before.the.radio.certification.number.only.signifies.that.
Industry Canada technical specifications were met.
Cordless.Telephone.Privacy
Operation.is.subject.to.the.following.two.conditions:.(ꢀ).this.device.may.
not.cause.interference,.and.(2).this.device.must.accept.any.interference,.
including.interference.that.may.cause.undesired.operation.of.the.device..
“Privacy.of.communications.may.not.be.ensured.when.using.this.telephone.”
Cordless.telephones.are.radio.devices..Communications.between.
the.handset.and.base.of.your.cordless.telephone.are.accomplished.
by.means.of.radio.waves.which.are.broadcast.over.the.open.airways..
Because. of. the. inherent. physical. properties. of. radio. waves,. your.
communications.can.be.received.by.radio.receiving.devices.other.than.
your.own.cordless.telephone.unit..Consequently,.any.communications.
using.your.cordless.telephone.may.not.be.private.
59
INCLUDING,. BUT. NOT. LIMITED. TO. ANY. IMPLIED.
WARRANTIES.OF.MERCHANTABILITY.OR.FITNESS.FOR.
A. PARTICULAR. PURPOSE.. THIS. WARRANTY. DOES.
NOT.COVER.OR.PROVIDE.FOR.THE.REIMBURSEMENT.
OR. PAYMENT. OF. INCIDENTAL. OR. CONSEQUENTIAL.
DAMAGES.. Some. states. do. not. allow. this. exclusion. or.
limitation.of.incidental.or.consequential.damages.so.the.above.
limitation.or.exclusion.may.not.apply.to.you.
One.Year.Limited.Warranty
Important:. Evidence. of. original. purchase. is. required. for.
warranty. service.. WARRANTOR:. UNIDEN. AMERICA.
CORPORATION. (“Uniden”). ELEMENTS. OF. WARRANTY:.
Uniden.warrants,.for.one.year,.to.the.original.retail.owner,.
this.Uniden.Product.to.be.free.from.defects.in.materials.and.
craftsmanship.with.only.the.limitations.or.exclusions.set.out.
below..WARRANTY.DURATION:.This.warranty.to.the.original.
user.shall.terminate.and.be.of.no.further.effect.ꢀ2.months.
after.the.date.of.original.retail.sale..The.warranty.is.invalid.if.
the.Product.is.(A).damaged.or.not.maintained.as.reasonable.
or.necessary,.(B).modified,.altered,.or.used.as.part.of.any.
conversion kits, subassemblies, or any configurations not sold
by.Uniden,.(C).improperly.installed,.(D).serviced.or.repaired.by.
someone.other.than.an.authorized.Uniden.service.center.for.a.
defect.or.malfunction.covered.by.this.warranty,.(E).used.in.any.
conjunction.with.equipment.or.parts.or.as.part.of.any.system.
not.manufactured.by.Uniden,.or.(F).installed.or.programmed.
by.anyone.other.than.as.detailed.by.the.owner’s.manual.for.
this.product..STATEMENT.OF.REMEDY:.In.the.event.that.the.
product.does.not.conform.to.this.warranty.at.any.time.while.this.
warranty.is.in.effect,.warrantor.will.either,.at.its.option,.repair.or.
replace.the.defective.unit.and.return.it.to.you.without.charge.for.
parts,.service,.or.any.other.cost.(except.shipping.and.handling).
incurred.by.warrantor.or.its.representatives.in.connection.with.
the.performance.of.this.warranty..Warrantor,.at.its.option,.may.
replace.the.unit.with.a.new.or.refurbished.unit..THE.LIMITED.
WARRANTY.SET.FORTH.ABOVE.IS.THE.SOLE.AND.ENTIRE.
WARRANTY.PERTAINING.TO.THE.PRODUCT.AND.IS.IN.
LIEU.OF.AND.EXCLUDES.ALL.OTHER.WARRANTIES.OF.
ANY. NATURE. WHATSOEVER,. WHETHER. EXPRESS,.
IMPLIED.OR.ARISING.BY.OPERATION.OF.LAW,
LEGAL.REMEDIES:.This.warranty.gives.you.specific.legal.
rights,.and.you.may.also.have.other.rights.which.vary.from.
state.to.state..This.warranty.is.void.outside.the.United.States.
of.America. and. Canada.. PROCEDURE. FOR. OBTAINING.
PERFORMANCE. OF. WARRANTY:. If,. after. following. the.
instructions.in.the.owner’s.manual.you.are.certain.that.the.
Product.is.defective,.pack.the.Product.carefully.(preferably.in.
its.original.packaging)..Disconnect.the.battery.from.the.Product.
and.separately.secure.the.battery.in.its.own.separate.packaging.
within.the.shipping.carton..The.Product.should.include.all.parts.
and.accessories.originally.packaged.with.the.Product..Include.
evidence.of.original.purchase.and.a.note.describing.the.defect.
that.has.caused.you.to.return.it..The.Product.should.be.shipped.
freight.prepaid,.by.traceable.means,.to.warrantor.at:.
Uniden.America.Service
4700.Amon.Carter.Blvd.
Fort.Worth,.TX.76ꢀ55
60
M
Index
Making.a.call.from.a.Caller.ID.Re-
E
A
H
B
O
I
Battery.Replacement.and.Handling.
Installing.the.Rechargeable.Battery.
P
C
K
L
R
D
6ꢀ
S
T
V
Voice.Message.Waiting.Indicator.
62
At.Uniden,.we’ll.take.care.of.you!
Thank. you. for. purchasing. a. Uniden. product.. if. you. have. any. questions. or. problems,.
please.do.not.return.this.product.to.the.place.of.purchase.
Our.customer.care.specialists.are.here.to.help.you!.Visit.our.website.at.
www.
Having.Trouble?
or.call.our.Customer.Service.Hotline.at.
,.
uniden.com.
1-800-297-1023
Monday.through.Friday,.7.AM.to.7.PM.or.Saturday/Sunday,.9.AM.to.5.PM,.
CST..The.Customer.Service.Hotline.is.closed.on.holidays.
To.order.headsets,.additional.handsets,.replacement.batteries,.or.other.
Need.A.Part?
accessories,.visit.our.website.at.
.or.call.
,.
www.uniden.com
1-800-554-3988
Monday.through.Friday,.8.AM.to.5.PM,.CST.
If.you.need.special.assistance.due.to.a.disability,.or.have.questions.on.the.
Help.For.Our.
Customers.with.
Special.Needs
accessibility.features.of.this.product,.please.call.
.(voice.or.
1-800-874-9314
TTY).
May.be.covered.under.one.or.more.of.the.following.U.S..patents:
4,797,9ꢀ6.
5,38ꢀ,460
5,574,727.
5,67ꢀ,248.
5,768,345.
5,893,034.
5,987,330.
6,4ꢀ8,209.
6,788,953.
5,426,690.
5,58ꢀ,598.
5,696,47ꢀ.
5,787,356.
5,9ꢀ2,968.
6,044,28ꢀ.
6,6ꢀ8,0ꢀ5.
6,839,550.
5,434,905.
5,650,790.
5,7ꢀ7,3ꢀ2.
5,794,ꢀ52.
5,9ꢀ5,227.
6,070,082.
6,67ꢀ,3ꢀ5.
6,889,ꢀ84.
5,49ꢀ,745.
5,660,269.
5,732,355.
5,80ꢀ,466.
5,929,598.
6,ꢀ25,277.
6,7ꢀ4,630.
6,90ꢀ,27ꢀ.
5,493,605.
5,66ꢀ,780
5,754,407.
5,825,ꢀ6ꢀ.
5,930,720.
6,253,088.
6,782,098.
6,907,094.
5,533,0ꢀ0.
5,663,98ꢀ.
5,758,289.
5,864,6ꢀ9.
5,960,358.
6,3ꢀ4,278.
6,788,920.
6,9ꢀ4,940
63
Memo
64
Memo
65
Memo
66
|