Mac User Guide
DriveStation Combo
USB 2.0 and Firewire Hard Drive
Package contents:
• Main Unit (DriveStation)
• Power Cord
• USB Cable
• 1394/FireWire Cable
• DriveNavigator Installation CD
• User Guides
v1.1
DriveStation Setup
Press the power switch on the back of DriveStation to the OFF position. Plug
DriveStation’s power cord into a power outlet. Then, connect a USB or firewire
cable into a matching port on the back of DriveStation.
Connect the USB or firewire cable to your Mac or other device you are adding
the DriveStation to.
3
DriveStation Setup
Flip the power switch on the back of the DriveStation to the ON (“I”) position.
Your Mac will detect the new drive and place an icon on your desktop.
Your DriveStation is now ready for use! Double-click on the icon to open the hard
drive.
4
Technical Specifications
USB Standards:
USB Specification Rev. 2.0
Data Transfer Speed:
Max 480 Mb/s (USB 2.0 Interface)
Max 400 Mb/s (FireWire 400 interface)
Max. 11 milliseconds
Seek Time:
Transmission Speed:
Power Consumption:
Power Supply:
Max. 480 Mbps
Max. 25W, Average 17W
AC100V-240V 50/60Hz (autosensing)
1.77 x 6.41 7.86 inches (45 x 163 x 200 mm.)
2.8 lbs. (1.27 kg)
Dimensions:
Weight:
Operating Environment:
5 - 35 degree C
20-80% humidity (non-condensing)
Mac OS 9, Mac OSX
Mac OS Compatability:
Technical Support
Technical support contact information is on the back page of this
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
5
USA/Canada Technical Support is available 24 hours a day, 7 days a week
toll-free: 866-752-6210
email: [email protected]
Europe Technical Support is available between 9am-6pm (Monday-Thursday) (GMT)
and 9am-4:30pm on Fridays.
email: [email protected]
phone (UK only): 087 12 50 12 60*
phone: +353 61 70 80 50
*Calls cost 8.5p per minute
©2005-2006, Buffalo Inc.
|