JPM814A
JPM816A
JPM818A
JPM820A
Feed-Through CAT6 Patch Panels
No punchdowns needed with this feed-through
panel.
• Unique design features RJ-45 plugs on both sides of the patch panel.
• Feed-through connectors provide super-easy cable management.
• Perfect for voice and data transmission up to 1 Gbps.
Overview
Specifications
The Feed-Through CAT6 Patch Panels meet Category 6
performance requirements and provide patching without
punching down the wires to the ports. These sturdy panels
install in relay racks or communications cabinets.
Standards — Category 6
Connectors — JPM814A: (24) shielded RJ-45 on front,
(24) shielded RJ-45 on back;
JPM816A: (48) shielded RJ-45 on front,
(48) shielded RJ-45 on back;
JPM818A: (24) unshielded RJ-45 on front,
(24) unshielded RJ-45 on back;
JPM820A: (48) unshielded RJ-45 on front,
(48) unshielded RJ-45 on back
After ordering a CAT6 Patch Panel, you should have received
the following items:
• (1) CAT6 Patch Panel
• (1) cable management bar for JPM814A and JPM818A, or
(2) cable management bars for JPM816A and JPM820A
Size — JPM814A, JPM818A: 1.75"H (1U) x 19"W x
4.5"D (4.4 x 48.3 x 11.4 cm);
• (4) 10-32 cuphead screws
• (4) 12-24 cuphead screws
• This users’ manual
JPM816A, JPM820A: 3.5"H (2U) x 19"W x 4.5"D
(8.9 x 48.3 x 11.4 cm)
Weight — JPM814A: 1.485 lb. (0.675 kg);
JPM816A: 2.78 lb. (1.265 kg);
If anything is missing or damaged, please contact Black Box at
724-746-5500.
JPM818A: 1.18 lb. (0.54 kg);
JPM820A: 2.18 lb. (0.993 kg)
For installation instructions, turn this page over…
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
Customer
Support
Information
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
|