Belkin P74782UK User Manual

Wireless Optical  
Desktop Kit  
Introduce wireless freedom to your desktop  
User Manual F8E883uk-BNDL  
1
___  
2
___  
3
___  
4
___  
5
___  
6
___  
7
Table of Contents  
1
___  
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Compatible Equipment . . . . . . . . . . . . . . . . . . . . 3  
Operating Systems . . . . . . . . . . . . . . . . . . . . . . . 3  
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . 3  
2. Quick Installation Guide . . . . . . . . . . . . . . . . . . . . 4  
2
___  
3
___  
4
___  
3. Software Installation for  
5
___  
Windows 98, Me, 2000, and XP . . . . . . . . . . . . . . . 5  
4. USB Standard Keyboard Hot Key Functions . . . . 6  
5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
6
___  
7
6. Uninstallation process for  
Windows 98, Me, 2000, and XP . . . . . . . . . . . . . . . 9  
7. Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Introduction  
1
Congratulations and thank you for purchasing the  
Wireless Keyboard and Optical Mouse bundle from  
Belkin. We appreciate your business and are sure  
you will enjoy years of reliable use with these high-  
quality, input devices. Please review this entire  
User Manual so you can be sure to get the most  
reliable performance from your new equipment.  
2
___  
3
___  
4
___  
5
___  
6
___  
7
2
Introduction  
1
Compatible Equipment  
2
___  
Works with all Pentium® processor based PCs.  
3
NOTE: Use of these products on a desk made  
of iron, or other metal, will negatively impact the  
operation of your Wireless Keyboard and Mouse.  
___  
4
___  
5
Operating Systems  
___  
Windows® XP, Me, 2000, 98 SE  
6
___  
7
Package Contents  
Wireless Keyboard  
Wireless Optical Mouse  
Receiver  
2 AAA batteries  
2 AA batteries  
User Manual  
Drver CD  
Please read the instructions for installing,  
operating, and using the wireless desktop.  
3
Quick Installation Guide  
1
___  
1. Be sure that your computer is turned on. If you  
are running Windows 98SE, Me, or 2000, you  
will need to keep your old keyboard and mouse  
connected for installation.  
2
3
___  
2. Connect only the receiver to your  
4
computer through the USB port.  
___  
5
___  
Note: When connecting the USB cable to your  
computer, Windows will start a New Hardware  
Wizard. In Windows XP, it will complete the Wizard  
automatically. In Windows 98, Me, and possibly 2000,  
you will need to follow through the New Hardware  
Wizard with your old keyboard and mouse.  
6
___  
7
3. Install the batteries into your Keyboard and  
Mouse. Please make sure you follow the  
indication on the inside compartment for correct  
positioning of the batteries.  
4. Press the receiver button.  
5. Press the reset button on the mouse.  
6. Press the receiver button again.  
7. Press the connect button on the  
keyboard. The connect button is the  
green lighted button indicated on your  
keyboard by the word "connect".  
4
Software Installation For Windows  
98SE, ME, 2000, and XP  
1
___  
Note: The Keyboard and Mouse should now be functioning.  
If they are not, repeat the setup instructions and refer to the  
“Troubleshooting” section for help. When the Mouse and  
Keyboard are operational, the software can be installed.  
2
___  
3
Warning: It is recommended that you uninstall any  
previously installed keyboard and mouse software  
prior to installing your new Belkin software.  
4
___  
5
___  
1. Be sure your computer is powered on.  
2. Insert the CD into your computer’s  
6
___  
CD-ROM drive.  
3. If you have not previously installed Keyboard and  
Mouse software, click “OK” and the installation  
will begin. Follow the on-screen instructions.  
7
4. Upon completion of installation, you will  
be prompted to restart your computer.  
You must restart at this time in order  
for the software to function.  
5
USB Standard Keyboard Hot Key Functions  
1
___  
2
___  
3
___  
4
5
___  
6
___  
7
6
Troubleshooting  
1
___  
The Keyboard and/or Mouse is/are not  
detected or do not work after installation.  
2
___  
3
___  
• Make sure the receiver cable is plugged  
into the computer’s USB port.  
4
___  
• For optimal performance, place the receiver  
at least eight inches (20cm) away from the  
computer monitor, the computer, any external  
storage devices, or other electrical devices.  
5
6
___  
• Make sure you have properly installed  
the batteries. Test the batteries to make  
sure they are not dead (you can do this  
by installing them into another device).  
7
• You may have other system devices that  
are conflicting with the Mouse and/or the  
Keyboard. Check the IRQ/address setting of these  
devices for conflicts and change the settings  
as required. Please refer to your computer  
documentation or the manufacturer’s technical  
support for assistance in making these changes.  
7
Troubleshooting  
1
___  
• Make sure you have properly established  
communication/ synchronization between the  
receiver and the Mouse and Keyboard.  
2
___  
3
• If the Keyboard and/or Mouse are not working,  
make sure that the LED on the Keyboard and/or  
Mouse start flashing when you push any of the  
Keyboard keys, Mouse buttons, or move the  
Mouse. If the LED does not flash, check to make  
sure you have installed the batteries correctly.  
___  
4
___  
5
6
• When the Keyboard or Mouse LEDs are flashing,  
the LED on the receiver should also flash to  
indicate they are speaking to each other. If the  
LED on the receiver does not flash, it means that  
the devices have not connected properly. Repeat  
step 4 to 7 of the quick installation guide.  
___  
7
• If your Mouse pointer becomes choppy on-  
screen or the Keyboard does not register  
keystrokes, replace batteries with a fresh set.  
• If your Cursor is controlled by another system in an  
office or multi-user environment, try to unload the  
batteries, insert them again after 2 minutes and repeat  
step 3 to step 7 of the quick installation guide.  
8
Uninstallation Process For Windows  
98SE, ME, 2000, and XP  
1
___  
1. Select “Setting”.  
2
___  
2. Select “Control Panel”.  
3. Select “Add/Remove Programs”.  
3
___  
4. Select “Belkin Wireless Driver,” then click on  
4
“Add Remove”.  
___  
5. You will be asked if you are sure if you want to  
remove the selected application and all of its  
components. Click on “Yes”.  
5
___  
6
7
The uninstall process will begin. Follow the on-screen  
instructions to complete the process.  
9
Information  
1
FCC Statement  
___  
DECLARATION OF CONFORMITY WITH FCC RULES  
2
___  
FOR ELECTROMAGNETIC COMPATIBILITY  
We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220,  
declare under our sole responsibility that the product:  
3
___  
F8E883-BNDL  
to which this declaration relates:  
4
Complies with Part 15 of the FCC Rules. Operation is subject to  
the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
___  
5
___  
6
CE Declaration of Conformity  
We, Belkin Corporation, declare under our sole responsibility, that the  
F8E883-BNDL to which this declaration relates, is in conformity with EN55022,  
EN61000-3-2, EN61000-3-3, and EN55024.  
___  
7
Caution: Exposure to Radio Frequency Radiation.  
The radiated output power of this device is far below the FCC radio frequency  
exposure limits. Nevertheless, the device shall be used in such manner that the  
potential for human contact normal operation is minimized. When connecting an  
external antenna to the device, the antenna shall be placed in such a manner to  
minimize the potential for human contact during normal operation. In order to avoid  
the possibility of exceeding the FCC radio frequency exposure limits, human proximity  
to the antenna shall not be less than 20cm (8inches) during normal operation.  
Federal Communications Commission Notice  
This equipment has been tested and found to comply with the limits for a Class  
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequency  
energy. If not installed and used in accordance with the instructions, it may cause  
harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try and correct the  
interference by one or more of the following measures  
• Reorient or relocate the receiving antenna.  
• Increase the distance between the equipment and the receiver.  
• Connect the equipment to an outlet on a circuit different from that to which the  
receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
10  
Information  
1
Modifications  
___  
The FCC requires the user to be notified that any changes or modifications to this  
device that are not expressly approved by Belkin Components may void the users  
authority to operate the equipment.  
2
___  
Belkin Corporation Limited Lifetime Product Warranty  
3
Belkin Corporation warrants this product against defects in materials and  
workmanship for its lifetime. If a defect is discovered, Belkin will, at its option,  
repair or replace the product atno charge provided it is returned during the  
warranty period, with transportation charges prepaid, to the authorized Belkin  
dealer from whom you purchased the product. Proof of purchase may be required.  
___  
4
___  
This warranty does not apply if the product has been damaged by accident, abuse,  
misuse, or misapplication; if the product has been modified without the written  
permission of Belkin; or if any Belkin serial number has been removed or defaced.  
5
___  
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU  
OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED.  
BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES,  
INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND  
FITNESSFOR A PARTICULAR PURPOSE.  
6
___  
7
No Belkin dealer, agent, or employee is authorized to make any modification,  
extension, oraddition to this warranty.  
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR  
CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY,  
OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO,  
LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING  
OR REPRODUCING ANY PROGRAM OR DATA STORED IN, OR USED WITH,  
BELKIN PRODUCTS.  
Some states do not allow the exclusion or limitation of incidental or consequential  
damages or exclusions of implied warranties, so the above limitations of exclusions  
may not apply to you.This warranty gives you specific legal rights, and you may  
also have other rights that vary from state to state.  
11  
Information  
1
Canada- Industry Canada (IC)  
The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada.  
This Class B digital complies with Canadian ICES-003.Cet appareil numérique de la  
classe B conforme á la norme NMB-003 du Canada.  
___  
2
___  
Europe-European Union Notice  
Radio products with the CE 0560 or CE alert marking comply  
with the R&TTE Directive (1995/5/EC) issued by the Commission  
of the European Community.  
3
___  
4
___  
Compliance with this directive implies conformity to the following European Norms (in  
brackets are the equivalent international standards).  
5
___  
• EN 60950 (IEC60950) – Product Safety  
• EN 300 328 Technical requirement for radio equipment  
6
• ETS 300 826 General EMC requirements for radio equipment.  
To determine the type of transmitter, check the identification  
label on your Belkin product.  
___  
7
Products with the CE marking comply with the EMC Directive (89/336/EEC) and the Low  
Voltage Directive (72/23/EEC) issued by the Commission of the European Community.  
Compliance with these directives implies conformity to the following European Norms  
(in brackets are the equivalent international standards)  
• EN 55022 (CISPR 22) – Electromagnetic Interference  
• EN 55024 (IEC61000-4-2,3,4,5,6,8,11)- Electromagnetic Immunity  
• EN 61000-3-2 (IEC610000-3-2) - Power Line Harmonics  
• EN 61000-3-3 (IEC610000) – Power Line Flicker  
• EN 60950 (IEC60950) – Product Safety  
Products that contain the radio transmitter are labeled with CE 0560 or  
CE alert markingand may also carry the CE logo.  
12  
1
___  
2
___  
3
___  
4
___  
5
___  
6
___  
7

HP Hewlett Packard HP M500 User Manual
Hanns G HH251HPB User Manual
GE DECT 28129xx5 User Manual
Frigidaire FFEC3025LB User Manual
Fisher Paykel Cooktop CG905D User Manual
Elo TouchSystems 1000 Series User Manual
Eizo Nanao Computer Monitor EV2316W User Manual
Dimplex DS5629 User Manual
BT Freestyle 335 User Manual
Beko BK 6340 Y User Manual