SuperSpeed USB 3.0
2-Port ExpressCard™
User Manual
8820-00417 F4U024
InTrodUCTIon
Table of Contents
seCTions
1
2
3
4
Welcome to Belkin SuperSpeed Connectivity!
Thank you for purchasing the Belkin SuperSpeed USB 3 0 2-Port ExpressCard
Now you can upgrade your laptop to the latest USB technology, for better speed and performance You will be ready to take advantage of
a host of new SuperSpeed USB 3 0 products!
Connecting your USB 3 0 products to your computer with the ExpressCard will allow them to work much faster than ever before This
includes your hard drives, thumb drives, video cameras, and more Your current or legacy-generation USB devices will continue to
work as they always have, and in some cases, even better Just follow the simple installation instructions in this User Manual to get your
ExpressCard set up and working well—then, enjoy the speed and convenience of Belkin USB 3 0 connectivity!
SuperSpeed USB 3.0 2-Port ExpressCard™
1
InTrodUCTIon
Table of Contents
seCTions
1
2
3
4
features
Package Contents
• Single chip NEC µPD720200F1USB 3.0 host controller
• Supports ExpressCard form-factor design
• 2 SuperSpeed USB 3.0 ports
• One - Belkin SuperSpeed USB 3.0 2-Port ExpressCard
• One - Power Adapter
• One - User Manual
• Simultaneous connection capability for low-, full-, high-, and
SuperSpeed USB devices
• One - Driver Installation CD
• Auto-detection of new devices as they are connected, along
with the speed of each device
• Backward-compatibility with legacy USB devices (1.1, 2.0)
• Plug-and-play technology
System requirements
• A Pentium® class PC with one available ExpressCard slot and a
CD-ROM drive
• Windows® XP (SP3), Windows Vista® (SP1), or Windows 7
operating system
USB Specifications
• Intel Extensible Host Controller Interface (xHCI) revision
0 96 compliant
• Current: 900mA per port
• USB 3.0 revision 1.0-compliant
• USB-IF Certified
SuperSpeed USB 3.0 2-Port ExpressCard™
2
InSTallaTIon
Table of Contents
seCTions
1
2
3
4
Installation is composed of three parts: Install Drivers, Install Hardware, and Initialize Drivers with Hardware.
Driver installation is recommended prior to installing the ExpressCard into your laptop computer. Please refer to the section that
corresponds to your operating system
Windows XP
1. Insert the Driver Installation CD into your CD-ROM drive and the installation wizard should start immediately. If it does not, please open
“My Computer” and right-click on your CD-ROM drive and select “Explore”. Then double-click “Setup” to start the installation wizard.
2. Using the default options, complete the install wizard.
3. Once the installation is complete, click the “Start” button in the lower, left-hand corner of your Windows desktop display. Next, click
“Shutdown” and then select “Shutdown” from the drop-down menu
4 Follow the hardware installation steps for the ExpressCard in the next section
SuperSpeed USB 3.0 2-Port ExpressCard™
3
InSTallaTIon
Table of Contents
seCTions
1
2
3
4
Windows Vista and Windows 7
1. Insert the Driver Installation CD into your CD-ROM drive and the installation wizard should start immediately. If it does not, click
the Start icon, click “Computer”, right-click on your CD-ROM drive, and select “Explore”. Then double-click “Setup” to start the
installation wizard.
2. Using the default options, complete the install wizard.
3. Once the installation is complete, click the “Start” button in the lower, left-hand corner of your Windows desktop display, and then
select “Shutdown”
4 Follow the hardware installation steps for the ExpressCard in the next section
SuperSpeed USB 3.0 2-Port ExpressCard™
4
InSTallaTIon
Table of Contents
seCTions
1
2
3
4
Hardware Installation
1 Locate your computer’s ExpressCard slot
2. Insert the ExpressCard into the slot. Apply pressure as needed until the Card is fully seated.
3 The ExpressCard will be detected and hardware will be installed automatically Installation is now complete
note: Depending on the speed of your computer, it may take up to 30–60 seconds for the ExpressCard to be detected.
The installation procedure is now complete
SuperSpeed USB 3.0 2-Port ExpressCard™
5
InSTallaTIon
Table of Contents
seCTions
1
2
3
4
Verifying Proper Installation (XP)
Verifying Proper Installation (Windows Vista,
Windows 7)
After installation, you may check the Device Manager to confirm
After installation, you may check the Device Manager to confirm
that the ExpressCard has been properly installed
that the ExpressCard has been properly installed
1 Right-click on “My Computer”
1 Click “Start” and right-click “Computer”
2 Select “Properties”
2 Select “Properties”
3. Select the “Hardware” tab and click the “Device
Manager” button
3. Click the “Device Manager” link on the left panel.
4 Expand “Universal Serial Bus Controllers”
4 Expand “Universal Serial Bus Controllers”
5 Look for an entry called “NEC Electronics USB 3 0
5 Look for an entry called “NEC Electronics USB 3 0
Host Controller”
Host Controller”
6 Look for an entry called “NEC Electronics USB 3 0 Root Hub”
6 Look for an entry called “NEC Electronics USB 3 0 Root Hub”
note: If your computer features built-in USB ports, you will see
additional USB controller and root-hub entries in the Device
Manager list
SuperSpeed USB 3.0 2-Port ExpressCard™
6
TroUBlESHooTIng
Table of Contents
seCTions
1
2
3
4
With which operating systems will the ExpressCard work?
Windows XP (SP3), Windows Vista (SP1), and Windows 7
My notebook computer does not detect the ExpressCard.
What should I do?
1 Make sure your computer meets all hardware and
software requirements
What are the hardware requirements for the ExpressCard?
Pentium class computer with one available ExpressCard slot
2 Make sure the ExpressCard is properly seated into the
ExpressCard slot
3 Make sure the power adapter is plugged into your ExpressCard
4 Make sure your operating system has the latest updates and
service packs
SuperSpeed USB 3.0 2-Port ExpressCard™
7
TroUBlESHooTIng
Table of Contents
seCTions
1
2
3
4
My USB device does not work when connected to the Belkin
USB 3.0 ExpressCard. What should I do?
Confirm the correct installation of the Belkin USB 3 0
ExpressCard Confirm the correct installation of your USB device
note: It may be necessary to reinstall the software/drivers for your
USB device when switching USB ports
Will my low-, full-, or high-speed (USB 1.1, 2.0) device run at
SuperSpeed (USB 3.0) on this ExpressCard?
No The ExpressCard will not increase the speed of 2 0 or
1 1 devices
How far away from my computer can a USB 3.0 peripheral
be located?
Which ports are SuperSpeed USB 3.0 ports?
All the ports on the ExpressCard are compatible with Hi-Speed
USB 3 0 and legacy USB
The maximum USB 3 0 cable length is three meters (9 feet)
Anything longer will begin to cause problems due to propagation
delays and compromised signal integrity
SuperSpeed USB 3.0 2-Port ExpressCard™
8
InforMaTIon
Table of Contents
seCTions
1
2
3
4
fCC Statement
Belkin International, Inc., limited lifetime
Product Warranty
What this warranty covers.
Belkin International, Inc (“Belkin”) warrants to the original
purchaser of this Belkin product that the product shall be free of
defects in design, assembly, material, or workmanship
dEClaraTIon of ConforMITY WITH fCC
rUlES for ElECTroMagnETIC CoMPaTIBIlITY
We, Belkin International, Inc , of 501 West Walnut Street,
Compton, CA 90220, declare under our sole responsibility that
the product:
F4U024
What the period of coverage is.
Belkin warrants the Belkin product for the lifetime of the product
to which this declaration relates:
Complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation
What will we do to correct problems?
Product Warranty.
Belkin will repair or replace, at its option, any defective product
free of charge (except for shipping charges for the product)
Belkin reserves the right to discontinue any of its products
without notice, and disclaims any limited warranty to repair or
replace any such discontinued products In the event that Belkin
is unable to repair or replace the product (for example, because it
has been discontinued), Belkin will offer either a refund or a credit
toward the purchase of another product from Belkin com in an
amount equal to the purchase price of the product as evidenced
on the original purchase receipt as discounted by its natural use
CE declaration of Conformity
We, Belkin International, Inc , declare under our sole
responsibility that the F4U024, to which this declaration relates,
is in conformity with Generic Emissions Standard EN55022:1998
Class B, EN50081-1, and with Generic Immunity Standard
EN50082-1:1992.
SuperSpeed USB 3.0 2-Port ExpressCard™
9
InforMaTIon
Table of Contents
seCTions
1
2
3
4
What is not covered by this warranty?
a The part number of the Belkin product
b Where you purchased the product
c When you purchased the product
d Copy of original receipt
All above warranties are null and void if the Belkin product is not
provided to Belkin for inspection upon Belkin’s request at the
sole expense of the purchaser, or if Belkin determines that the
Belkin product has been improperly installed, altered in any way,
or tampered with The Belkin Product Warranty does not protect
against acts of God such as flood, lightning, earthquake, war,
vandalism, theft, normal-use wear and tear, erosion, depletion,
obsolescence, abuse, damage due to low voltage disturbances
(i.e. brownouts or sags), non-authorized program, or system
equipment modification or alteration
2 Your Belkin Customer Service Representative will then
instruct you on how to forward your receipt and Belkin
product and how to proceed with your claim
Belkin reserves the right to review the damaged Belkin product
All costs of shipping the Belkin product to Belkin for inspection
shall be borne solely by the purchaser If Belkin determines,
in its sole discretion, that it is impractical to ship the damaged
equipment to Belkin, Belkin may designate, in its sole discretion,
an equipment repair facility to inspect and estimate the cost
to repair such equipment The cost, if any, of shipping the
equipment to and from such repair facility and of such estimate
shall be borne solely by the purchaser. Damaged equipment
must remain available for inspection until the claim is finalized.
Whenever claims are settled, Belkin reserves the right to be
subrogated under any existing insurance policies the purchaser
may have
How to get service.
To get service for your Belkin product you must take the
following steps:
1 Contact Belkin Tech Support at the number listed on page 12,
within 15 days of the Occurrence. Be prepared to provide the
following information:
SuperSpeed USB 3.0 2-Port ExpressCard™
10
InforMaTIon
Table of Contents
seCTions
1
2
3
4
How state law relates to the warranty.
This warranty gives you specific legal rights, and you may also
have other rights, which may vary from state to state Some
states do not allow the exclusion or limitation of incidental,
consequential, or other damages, so the above limitations may
not apply to you
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF
BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED
OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING
THE IMPLIED WARRANTY OR CONDITION OF QUALITY,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE
LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.
Some states do not allow limitations on how long an implied
warranty lasts, so the above limitations may not apply to you
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL,
SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE
DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS
OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY
BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
SuperSpeed USB 3.0 2-Port ExpressCard™
11
free Tech Support*
*National call rates may apply
CoUnTrY
nUMBEr
InTErnET adrESS
AUSTRIA
0820 200766
www belkin com/de/
www belkin com/nl/
www belkin com/fr/
BELGIUM
07 07 00 073
CZECH REPUBLIC
DENMARK
FINLAND
239 000 406
www belkin com/uk/
www belkin com/uk/
www belkin com/uk/
www belkin com/fr/
www belkin com/de/
www belkin com/uk/
www belkin com/uk/
www belkin com/uk/
www belkin com/uk/
www belkin com/it/
www belkin com/uk/
701 22 403
You can find additional support information on our
website www belkin com through the tech-support
area If you want to contact technical support by
phone, please call the number you need from this list*
0972519123
FRANCE
08 - 25 54 00 26
0180 - 500 57 09
00800 - 44 14 23 90
06 - 17 77 49 06
800 8534
GERMANY
GREECE
HUNGARY
ICELAND
IRELAND
0818 55 50 06
02 - 69 43 02 51
34 20 80 85 60
ITALY
LUXEMBOURG
NETHERLANDS
NORWAY
0900 - 040 07 90 €0 10 per minute www belkin com/nl/
81 50 0287
www belkin com/uk/
www belkin com/uk/
www belkin com/uk/
www belkin com/
POLAND
00800 - 441 17 37
707 200 676
PORTUGAL
RUSSIA
495 580 9541
0800 - 99 15 21
902 - 02 43 66
07 - 71 40 04 53
SOUTH AFRICA
SPAIN
www belkin com/uk/
www belkin com/es/
www belkin com/uk/
SWEDEN
www belkin com/de/
www belkin com/fr/
SWITZERLAND
08 - 48 00 02 19
UNITED KINGDOM
OTHER COUNTRIES
0845 - 607 77 87
www belkin com/uk/
+44 - 1933 35 20 00
SuperSpeed USB 3.0 2-Port ExpressCard™
12
Belkin Ltd.
Belkin SAS
Belkin GmbH
Hanebergstrasse 2
80637 Munich
Germany
Express Business Park
Shipton Way, Rushden
NN10 6GL, United Kingdom
130 rue de Silly
92100 Boulogne-Billancourt,
France
Belkin Iberia
Belkin Italy & Greece
Via Carducci, 7
Milano 20123
Italy
Belkin B.V.
C/ Anabel Segura, 10 planta baja, Of. 2
28108, Alcobendas, Madrid
Spain
Boeing Avenue 333
1119 PH Schiphol-Rijk,
Netherlands
© 2009 Belkin International, Inc. All rights reserved. All trade names are registered
trademarks of respective manufacturers listed Windows and Windows Vista are
either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries. ExpressCard is a trademark of PCMCIA.
8820-00417 F4U024
|