2402 Digital Telephone
User’s Guide
555-233-789
Issue 1
October 2003
Contents
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Call Appearance and Call Identification Displays . . . . . 10
Status Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Call-Handling Features . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Getting Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Personalized Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Performing a Self Test . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using Selected Voice Features . . . . . . . . . . . . . . . . . . . . 17
How to Access a Voice Feature . . . . . . . . . . . . . . . . . . 17
Tones and Their Meaning. . . . . . . . . . . . . . . . . . . . . . . . . 24
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3
4
Overview
The 2402 Digital Telephone is a two-line digital telephone for use with an
Avaya call processing system. This guide covers how to use your new 2402
Digital Telephone. This document is intended for telephone users who have a
2402 on their desks. It is not intended to be a technical reference guide for
System Administrators or telephone technicians.
Safety Information
Your 2402 telephone has been manufactured according to industry standards
for quality and safety assurance. When using your telephone, follow
recommended safety precautions to reduce the risk of fire, electric shock, and
personal injury. See the 2400 Series Telephone Installation and Safety
Instructions that were packaged with your telephone.
5
TABLE 1 The 2402 Telephone Components
The following items correspond to the numbers in Figure 1.
1) Call appearance buttons — For
8) Drop button — Disconnects the
accessing incoming/outgoing lines.
current call. If you are on a conference
call, press this button to drop the last
person you added to the conference.
2) Display — This area shows status
for the call appearances, the caller ID
information for a call, the current date
and time, and information provided by
the Avaya call processing system.
9) Redial button — Dials the last
number you dialed.
3) Message lamp — This lamp is lit
when a message has arrived in your
voice mailbox. By default, this lamp
flashes to alert you to incoming calls.
You can retrieve messages using the
button.
10) Dialpad — Standard 12-button pad
for dialing telephone numbers.
4) Messages button
retrieving messages.
— For
11) Volume control buttons — For
adjusting speaker, handset, or ringer/
button click volume depending on
which component is in use.
5) Hold button — For placing calls on 12) Mute button
— For turning
hold.
off the handset microphone. When the
Mute feature is active, the associated
lamp turns on and the person at the
other end of the call cannot hear you.
6) Transfer button — For transferring 13) Feature button
— For
calls.
using features that your system
manager has administered on your
2402 telephone.
7) Conference button — For
14) Speaker button
— For
conferencing calls.
accessing the built-in one-way speaker.
The lamp associated with this button
turns on when the speaker is active.
7
Headsets
To make or answer a call with a headset, you must take the handset offhook.
To disconnect, you must hang up the handset.
Headsets consist of a headpiece (1 in Figure 2 below) and modular base unit
(2). The base unit plugs into the Handset jack (3).
1
CONFERENCE
3
2
FIGURE 2 The Headset Attached to a 2402 Telephone
The following headsets can be used with the 2402 telephone:
—
—
—
—
—
—
—
—
—
—
—
Starset top H31
Mirage top H41
Mirage top H41N
Supra Monaural top H51
Supra Monaural NC top H51N
Supra Binaural top H61
Supra Binaural NC top H61N
Encore Monaural Voice Tube H91
Encore Monaural NC top H91N
Encore Binaural Voice Tube H101
Encore Binaural NC top H101N
8
—
—
—
—
Tristar Voice Tube top H81
Tristar Noise Canceling top H81N
Duoset (Supra Starter) Voice Tube H141 Headband only
Duoset (Supra Starter NC) Noise Canceling top H141N
Headband only
—
—
Duoset (Earset Starter) Voice Tub top H141 Earhooks only
Duoset (Earset Starter NC) Noise Canceling top H141N
Earhooks only
—
—
Duoset (Starter Special VT) Voice Tube top H141
Headband & Earhooks
Duoset (Starter Special NC) Noise Canceling top H141N
Headband & Earhooks
2402 Telephone User Checklist
The remainder of this guide contains procedures for using the 2402 telephone.
The following table directs you to sections explaining specific activities you
may want to perform.
To
See
Understand call appearance
displays
“Call Appearance and Call
Identification Displays” on page 10
Handle calls (that is, answer and
make calls, hold calls, transfer
calls, redial numbers, set up
conference calls, etc.)
“Call-Handling Features” on page 12
Retrieve voice mail messages
“Getting Messages” on page 15
Change ring pattern and visual ring
settings
“Personalized Settings” on page 16
Check lamp and display
component status
“Performing a Self Test” on page 17
Use features that your system
manager has administered on your
2402 telephone or has supplied
you with the required feature
access codes.
“Using Selected Voice Features” on
page 17
9
Call Appearance and Call
Identification Displays
The 2402 displays the status of the two call appearances, the caller ID
information, the current date and time, and information provided by the Avaya
call processing system.
The date and time information is provided by your call processing system. This
information is displayed on the top line of the display when the telephone is
idle.
Note: After initially plugging in a 2402 telephone or after a power outage, it
may take several minutes before the time and date appear on the
screen. If the date and time displayed are incorrect, contact your
system manager.
The 2402 has two call appearances, which are accessed by pressing the a
and b buttons located to the left of the display.
When you receive or make calls, the available call identification information is
displayed with the corresponding call appearance letter on the first line of the
display. Even though information is displayed for one call appearance at a
time, a status icon will be displayed next to the corresponding call appearance
button to show the status of each appearance when there is activity on both.
For example, if call appearance a is hold, and you are active on a call on call
appearance b, the hold icon will appear next to button a, the active icon will
appear next to button b, and the available call identification information for the
active call (call appearance b) will appear on the first line of the display. (See
Figure 3.)
b=97325558641
FIGURE 3 Sample Display with Two Calls
When you dial an extension, that number is shown and then replaced by the
called party’s name and extension. The call identification information
associated with an extension is provided by the call processing system. When
a call is received from another extension, the caller’s name is shown;
when a call is received from outside, the calling number (if available),
“OUTSIDE CALL,” or a trunk identifier is shown.
When a call arrives at the 2402 telephone, the bell icon blinks on the
corresponding call appearance (see “Status Icons” on page 11). After you
answer the call, the active call icon is displayed.
10
Status Icons
The icons displayed on the call appearances of your 2402 telephone are
explained in the following table. These icons replace the functionality of the
green lamps and equivalent flash rates.
Status Icons
Icon
Definition
Ringing
An incoming call is waiting to be answered.
See “Tones and Their Meaning” on page 24
for information about the corresponding
audio alert.
Active
The call you are currently handling.
On hold
A call currently on hold.
On soft hold
A call put on hold during a transfer or
conference.
Feature
pending
Your request is being processed but is not
immediately available.
11
Call-Handling Features
This section provides the procedures for handling calls with the 2402
the Overview for the Avaya Communication Manager Software (555-233-767)
for alternate procedures.
Answer a call
When a call arrives at your 2402 telephone, you hear a ringing tone and a
blinking bell icon appears on the associated call appearance. In addition, call
Identification Displays” on page 10, earlier in this guide, for details).
To answer an incoming call
Do one of the following:
•
If you are not active on another call, answer the call using your
handset.
•
If you are active on a call already, place the active call on hold (see
“Hold” on page 12), and then answer the incoming call by pressing
the ringing call appearance button.
Make a call
You can make calls from the 2402 telephone using a variety of methods.
To make a call manually
1. Go off hook using the handset or speaker.
2. When you hear dial tone, enter the extension or telephone number
using the dialpad. If you used the speaker, you must use the handset to
talk.
If you are calling an external number, be sure to include the required code
(for example, “9”) to access an outside line.
To have the 2402 telephone make a call automatically
Press
to have the 2402 telephone dial the last number that you
dialed.
Hold
The Hold feature puts a call on hold until you can return to it.
To put a call on hold
Press
.
To return to the held call
Press the call appearance button of the held call.
Note: Your system manager may have administered the Unhold feature. In
this case, you can return to the held call by pressing
.
12
.
Redial
The Redial (or Last Number Dialed) feature automatically redials the last
number you dialed (up to 24 digits).
To redial the last number that you dialed
Press
.
.
Speaker (Listen Only)
The Speaker allows you to place calls or access other features without lifting
your handset. However, in order to speak to the other party, you must use the
handset.
To place a call without lifting the handset or to use the speaker with any
feature
1. Press
.
2. Place a call, or access the selected feature.
3. Adjust the speaker volume if necessary.
To raise the volume, press the volume control button
; to lower
the volume, press the volume control button
.
The display shows the volume level. (There are eight volume levels.)
To change from the speaker to the handset
Pick up the handset and talk.
To change from the handset to the speaker
Press
. You can now hang up the handset (within 10 seconds), and
the call will remain active on the speaker. However, in order to talk to the
other party, you must use the handset.
To end a call (while the handset is on-hook and only the speaker is
active)
Press
.
To use the Group Listen feature in which the handset and the speaker
are active at the same time
While you are active on the handset, press
.
13
.
Transfer
The Transfer feature allows you to transfer a call from your telephone to
another extension or outside number.
To transfer the current call to another extension
1. While on a call, press
.
2. When you hear dial tone, dial the number to which the call is to be
transferred.
3. Do one of the following:
•
To transfer the call without announcing it, press
hang up.
again, and
The transfer is complete.
•
To announce the call before transferring it, wait for the called party
to answer. Go to Step 4.
4. When the called party answers, announce the call.
(If the line is busy or if there is no answer, press
. Then, you can
return to the held call by pressing its call appearance button.)
5. Press
again and hang up to complete the transfer.
The “Transfer Completed” message is displayed.
Note: Your system manager may have administered the Transfer-on-Hang-
up feature. In this case, you can transfer a call by pressing
,
dialing the number to which the call is to be transferred, and then
hanging up. To cancel an attempted transfer, press the original call
appearance. If your system has auto-hold activated, use to
cancel a transfer so that the potential transfer recipient is not left on
hold.
14
Conference
The Conference feature allows you to conference up to six parties (including
yourself) on a call.
To add another party to a call
1. Press
.
2. When you hear dial tone, dial the number of the person you want to
add to the call.
3. Wait for an answer.
4. To add the person to the call, press
(If the called party does not answer or does not want to join the
conference, press . Then, you can return to the held call by
again.
pressing its call appearance button.
5. Repeat Steps 1 through 4 for additional conference connections.
To add a held call to an active call
1. Press
.
2. Press the call appearance button (a or b) corresponding to the held
call.
3. Press
again.
To remove the last person added to the conference call
When active on the conference call, press
.
Getting Messages
Message
Your Message lamp turns on when a caller has left a message for you. Press
to retrieve your messages, and follow the prompts.
Note: Certain features must be programmed by your system manager to
activate the
button. Please see your system manager if the
message lamp is not working properly. See Chapter 21, “Features and
Technical Reference,” of the Administrator’s Guide for Avaya
Communication Manager Software, Document No. 555-233-506 for
Message button programming information.
15
Personalized Settings
You can set your preferences for the following:
• ring pattern
• visual ring
Ring Pattern
The Ring Pattern option allows you to choose a personalized ringing pattern
for your telephone. You can choose from among eight different patterns.
To select a personalized ringing pattern
1. While you are on-hook, press
You will hear the current ring pattern.
2. Press again to listen to the next ring pattern. Use
through all eight ringing patterns. If you want to save the ringing pattern
.
to cycle
currently being played, do not press
pattern will be saved automatically.
anymore. The selected ringing
Note: If you go off-hook, receive a call, or lose power during selection,
the process is canceled and you must start again.
Visual Ring
The Visual Ring option allows you to choose a visual alert for incoming calls.
When you enable this option, the telephone rings and the lamp above the
2402 display area flashes when an incoming call arrives. By default, the
Visual Ring option is enabled.
To set the Visual Ring option
1. Press
.
The Feature lamp turns on.
2. Press
.
The Feature lamp turns off.
3. Do one of the following:
•
•
If you want to enable the Visual Ring option, press *.
If you want to disable the Visual Ring option, press #.
You will hear a confirmation tone.
16
Performing a Self Test
Self Test
The Self Test option, which appears on this screen, verifies the operation of
the 2402 telephone’s lamps and display components. While the telephone is
running in self-test mode, you cannot make and receive calls using the
dialpad and call-handling buttons.
To have the 2402 telephone perform a self test
1. While on-hook, press and hold
The lamps go on steadily, and all the display segments fill in.
2. To end the test, release
.
.
Using Selected Voice Features
The following features are available only if your system manager has
administered them as feature buttons on your 2402 telephone or has supplied
you with the required feature access codes.
How to Access a Voice Feature
When you want to use one of the voice features on the 2402 telephone, you
can access the feature in one of two ways:
•
You can access up to 12 features by pressing
and then the dial pad
key (1 through 9, 0, *, or #) that corresponds to that feature. These features
are administered on your telephone by your system manager. (The red
lamp next to
goes on steadily when the button is pressed to let you
know that your dial pad is now in the Feature selection mode.)
For example, if the Send All Calls feature is assigned to dial pad key 1, you
can press
, and then dial 1 to use this feature.
Note: As your system manager assigns features to the Feature Directory
slots (1 through 9, 0, *, and #), be sure to write the feature in the
Feature Directory table (below). This directory list provides a
convenient quick reference for the 12 features programmed on the dial
pad.
17
Features Administered on 2402 Dial Pad
DialPad
Feature Administered on Dial Pad Key
Key
1
2
3
4
5
6
7
8
9
0
*
#
•
Features other than those assigned to your dial pad keys can be accessed
by dialing a 1-, 2-, or 3-digit feature access code, without using
system manager can supply those access codes for you.
. Your
18
Abbreviated Dialing/Automatic Dialing (AD)
The Abbreviated Dialing (AD) feature allows you to store selected telephone
numbers for quick and easy dialing. Each number can be a complete or
partial telephone number, an extension number, or a trunk or feature access
code and can contain up to 24 digits. Abbreviated Dialing offers four possible
types of lists—Personal, Group, System, and Enhanced, and you can have a
total of three lists. (Of these three lists, you can have only one System List
and one Enhanced List.) You program numbers on a Personal List; numbers
on Group Lists are programmable by the controller of the list; System Lists
and Enhanced Lists are programmable only by the system manager.
To place a call using an AD list button or feature access code
1. Press
and then the appropriate dial pad key on which a list
access code is administered,
or Dial the appropriate AD List code for List 1, or List 2, or List 3.
2. When you hear dial tone, dial the desired list item (1, 2, 3...).
Note: An Enhanced List may also be available; see your system
manager.
You can also program a number on an AD button that is not stored on an AD
list. This Automatic Dialing number can be up to 16 digits.
To program a number on an AD button
Note: The system manager must program a feature button as an AD
button before you can program a number onto it.
1. While off-hook, press
AD Program feature,
and then the dial pad key assigned to the
or While off-hook, dial the Program access code.
You will hear dial tone.
2. Press
and then the dial pad key you wish to program.
For example, to store a number in AD entry F3, press
3.
and then
3. Dial the outside number, extension, or feature access code you want to
store (up to 24 digits).
4. Press # to save the entry.
You will hear confirmation tone and then dial tone.
5. Repeat Steps 2 through 4 to program additional buttons.
6. Hang up to end programming.
19
To call a number using an AD button
While off-hook, press
and then the dial pad key that corresponds to the
AD number you want to call.
You will hear ringback tone.
For example, to call the number stored as AD entry F3, press
, and
then press 3.
Call Forwarding All Calls
The Call Forwarding feature temporarily forwards all your calls to another
extension or to an outside number, depending on your system.
To temporarily redirect all calls to an extension or outside number of
your choice
1. Press
(while off-hook) and then the dial pad key on which the
Call Forwarding features is administered
or Dial the Call Forward feature access code (while off-hook).
2. When you hear dial tone, dial the extension or number where calls will
be sent.
3. When you hear confirmation tone, hang up.
To cancel Call Forwarding
Press
(while off-hook) and then the dial pad key on which the Call
Forwarding Cancel feature is administered
or Dial the Call Forward cancel code (while off-hook).
You will hear confirmation tone. Your calls will now ring at your own
telephone.
Call Park
The Call Park feature allows you to put a call on hold at your telephone for
retrieval at any extension.
To park a call at your extension (for retrieval at any extension)
1. Press
.
You will hear dial tone.
2. Enter the Call Park feature access code.
3. When you hear confirmation tone, hang up.
To retrieve a parked call from another extension
1. Pick up the handset or press
.
2. Dial the Answer Back feature access code.
3. When you hear a dial tone, dial the extension at which you parked the
call.
If returning to a call parked at your telephone, dial your own
extension.
20
Call Pickup and Directed Call Pickup
The Call Pickup feature lets you answer a call at your telephone for another
extension in your pickup group. If you can use the Directed Call Pickup
feature, you can pick up a call ringing at a specific extension without the
extension being a member of your pickup group.
To answer a call placed to a member of your pickup group when your
telephone is idle
Press
(while off-hook) and then the dial pad key on which the Call
Pickup feature is administered
or Dial the Call Pickup access code (while off-hook).
The called telephone stops ringing, and you are connected to the
ringing call.
To pick up a call directly for someone else in your office
Note: Again, the Directed Call Pickup feature is designed for covering calls
for associates while they are away from their desk. In this case, you
do not have to be a member of the same pickup group.
1. Press
(while off-hook) and then the dial pad key on which the
Call Pickup feature is administered
or Dial the Directed Call Pickup access code.
2. Dial the extension of the ringing telephone.
The called telephone stops ringing, and you are connected to the
ringing call.
.
Leave Word Calling
The Leave Word Calling (LWC) feature leaves a message for a person at
another extension to call you back. The called party will be able to dial the
message service (for example, an attendant, AUDIX or other voice mail
system, a covering user, etc.) to retrieve a short, standard message which
gives your name and extension, the date and time you called, and the
number of times you called.
To leave a message after dialing an extension (when your call is not
answered, you hear a coverage or busy tone, or you have been put on
hold)
1. Press
and then the dial pad key on which the Leave Word
Calling feature is administered.
2. When you hear confirmation tone, hang up.
Message lamp goes on at the called telephone (if so equipped).
Note: If you hear reorder tone, the message is not stored; try again.
21
To leave a message without ringing an extension
1. Press and then the dial pad key on which the Leave Word
Calling feature is administered
or Dial the Leave Word Calling access code (while off-hook).
2. When you hear dial tone, dial the extension and listen for the
confirmation tone.
Message lamp goes on at the called telephone (if so equipped).
3. Hang up.
To cancel a Leave Word Calling message
Note: You cannot cancel a message left for an AUDIX subscriber.
1. Press
(while on-hook or off-hook) and then the dial pad key on
which the Leave Word Calling Cancel feature is administered
or Dial the Leave Word Calling cancel code (while off-hook).
2. When you hear dial tone, dial the extension and listen for confirmation
tone.
Note: If you hear reorder tone, the message is not canceled; try again.
Send All Calls
The Send All Calls feature temporarily sends all your calls to your voice mail
system or to another extension in the same system. Note that priority calls
and automatic callbacks are not redirected by the Send All Calls feature.
Note: Before you can use this feature, your system manager must provide a
coverage path for your extension.
To send all calls immediately to coverage (except priority calls and
automatic callbacks)
1. Press
(while on-hook) and then the dial pad key on which the
Send All Calls feature is administered
or Dial the Send All Calls access code (while off-hook)
2. If you used a feature access code, listen for confirmation tone.
Note: You hear confirmation tone only when you use a feature access
code.
To cancel Send All Calls
1. Press
(while on-hook) and then the dial pad key on which the
Send All Calls feature is administered
or Dial the Send All Calls cancel code (while off-hook).
2. Listen for confirmation tone.
22
Whisper Page
The Whisper Page feature allows you, if you have appropriate permissions,
to make an announcement to a person at another extension currently on
another call. Only the person at the other extension hears the
announcement; the other person on the call cannot hear the message.
To make an important announcement to someone at another extension
busy on another call
1. Press
(while off-hook) and then the dial pad key on which the
Whisper Page feature is administered
or Dial the Whisper Page access code.
Both people on the other call hear a beep.
The person whom you have called can press the
Whisper Answer
button
which forms a two-party speaking path with your telephone. The other
call is put on hold and that person cannot hear your conversation.
2. Speak with the person you have called.
Note: If the person whom you have called is not using the telephone at
the time you activate Whisper Page, the call is converted to a
normal call.
Note: Any person in the system with the Whisper Answer button
administered on the telephone can block Whisper Page calls by
Whisper Off
pressing the
button.
23
Tones and Their Meaning
Note: The tables below describe the defaults for each ringing and feedback
tone. Check with your system manager to verify if the descriptions in
the Meaning column are accurate for your system.
Ringing Tones are produced by an incoming call.
Ringing Tones
Rings
Meaning
1 ring
A call from another extension.
2 rings
A call from outside or from the
attendant.
3 rings
A priority call from another extension, or
from an Automatic Callback call you
placed.
◆
ring-ping
(half-ring)
A call redirected from your telephone to
another because Send All Calls or Call
Forwarding All Calls is active.
Feedback tones are those which you hear through the handset, headset, or
the speaker.
Feedback Tones
Tones
Meaning
busy
A low-pitched tone repeated 60 times a
minute; indicates the number dialed is in
use.
call waiting
ringback
A ringback tone with lower-pitched signal at
the end; indicates the extension call is
busy, and the called party has been given a
call waiting tone. If you hear this tone, you
may wish to activate Automatic Callback.
confirmation
Three short bursts of tone; indicates a
feature activation or cancellation has been
accepted.
continued on next page
24
Feedback Tones (continued)
Tones
Meaning
coverage
One short burst of tone; indicates your
call will be sent to another extension
to be answered by a covering user.
dial
A continuous tone; indicates dialing
can begin.
intercept/
time-out
An alternating high and low tone;
indicates a dialing error, a denial of
the service requested, or a failure to
dial within a preset interval (usually
10 seconds) after lifting the handset
or dialing the previous digit.
recall dial
Three short bursts of tone followed by
a steady dial tone; indicates the
feature request has been accepted
and dialing can begin.
reorder
A fast busy tone repeated 120 times a
minute; indicates all trunks are busy.
ringback
A low-pitched tone repeated 15 times
a minute; indicates the number dialed
is being rung.
25
26
Index
F
feature, 21
Feature button, 7
feedback tones, 24
Numerics
2402 telephone
components, 6
display, 7
feedbacktones, 24
ringing tones, 24
Hold button, 7
Hold feature, 12
A
L
Abbreviated Dialing, 19
AD button, 19
Automatic Dialing, 17, 19
C
M
call appearance displays, 10
call appearance/feature buttons, 7
Call Forwarding, 17, 20
call handling features, 12
call identification displays, 10
Call Park, 20
Call Pickup, 21
calls
O
answering, 12
conferencing, 15
holding, 12
options
making, 12
ring pattern, 16
Self Test, 17
redialing, 13
transferring, 14
checklist, 9
Conference button, 7
Conference feature, 15
D
Redial button, 7
Redial feature, 13
ring pattern, 16
ringing, 24
dialpad, 7
Directed Call Pickup, 21
Display, 10
ringing tones, 24
display, 7
Drop button, 7
27
S
safety information, 5
Self Test option, 17
self-test mode, 17
Send All Calls, 22
speaker button, 7
speaker feature, 13
status icons, 11
user checklist, 9
Abbreviated Dialing, 17
Call Park, 20
Call Pickup, 21
T
Leave Word Calling, 21
Send All Calls, 22
Whisper Page, 23
volume control buttons, 7
tones
feedback, 24
Transfer button, 7
Transfer feature, 14
trunk identifier, 10
W
Whisper Page, 23
28
|