TOASTER OVEN / ROTISSERIE
INSTRUCTION MANUAL
TOSTADOR-ASADOR / HORNEADOR
MANUAL DE INSTRUCCIONES
Model Number / No. de Modelo:
MK42SSP
(Unit appearance may vary)
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications without
notice.
La sección en español empieza en la página 14
Avanti Products, A Division of The Mackle Co., Inc.
P.O. Box 520604 - Miami, Florida 33152
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electrical shock, or
injury when using your appliance, follow these
basic precautions:
WARNING
When using electrical appliances, basic safety precautions should always be followed including
the following:
READ ALL INSTRUCTIONS, PRODUCT LABELS AND WARNINGS BEFORE USING THE
APPLIANCE.
Do not touch hot surfaces, use handles or knobs. Always use oven mitts when handling hot materials
and allow metal parts to cool before cleaning. Allow the unit to cool thoroughly before putting in or
taking off parts.
When the unit is not in use and before cleaning, unplug the appliance from the wall outlet. Make sure
the appliance is turned off before unplugging.
To protect against risk of electrical shock, do not immerse the appliance in water or any other liquids.
Don’t leave children alone or unattended where the appliance is hot or in operation. This appliance is
not designed to be used by children.
Never use your appliance for heating the room. Your oven is not designed to heat your kitchen.
Do not operate this or any appliance with a frayed or damaged cord or plug, after the appliance
malfunctions, is dropped or has been damaged in any manner.
Do not use attachments not recommended by the manufacturer; they may cause fire, electric shock
or personal injury.
Do not use outdoors or for commercial purposes.
Do not use this appliance for other than its intended use.
Do not let the cord dangle over the edge of a tabletop, countertop or to touch hot surfaces.
Do not place the appliance near a hot gas, electric burner or in a heated oven.
Extreme caution should be used when using containers constructed of other than metal or glass.
A fire may occur if the appliance is covered or touching flammable materials, including curtains,
draperies, walls, etc., when in operation. Do not store any items on top of the appliance when in
operation.
Do not store any materials, other than manufacturer’s recommended accessories in this unit when
not in use.
Do not place any flammable materials in the appliance, such as paper, cardboard, plastic or any
materials that may catch fire or melt.
Never clean the appliance with flammable liquids. The fumes can create a fire hazard or explosion.
Do not cover the appliance with metal foil. This will cause overheating of the appliance.
Oversized foods or metal utensils must not be inserted in the appliance as they may create a fire or
risk of electrical shock.
Do not clean with metal scouring pads. Pieces can break off the pad and touch electrical parts
involving a risk of electrical shock.
When broiling, use extreme caution when removing tray or disposing of hot grease.
To turn this appliance off, return all controls to the “0” / “OFF” position, then remove the plug from
wall outlet.
Cooked food can be very hot, especially pastry filling. Handle with care.
Never pick up a flaming pan. Turns the controls off. Smother a flaming pan on a surface unit by
covering the pan completely with a well fitting lid.
Do not use water on grease fires. Flaming grease outside a pan can be put out by covering it with
baking soda, multipurpose dry chemical, or fire extinguisher. Flame in the oven can be smothered
completely by closing the oven door and turning the oven off or by using baking soda, multipurpose
dry chemical, or fire extinguisher.
This Unit Is For Household Use Only
- SAVE THESE INSTRUCTIONS -
3
HELP US HELP YOU...
Read this guide carefully.
Write down the model and serial numbers.
You'll find them on a label located on the back
side of the unit.
It is intended to help you operate and maintain
your new appliance properly.
Please write these numbers here:
Keep it handy to answer your questions.
If you don't understand something or you need
more assistance, please call:
____________________________________
Date of Purchase
Avanti Customer Service
800-220-5570
____________________________________
Model Number
Keep proof of original purchase date (such as
your sales slip) with this guide to establish the
warranty period.
____________________________________
Serial Number
Use these numbers in any correspondence or
service calls concerning your appliance.
If you received a damaged appliance,
immediately contact the dealer (or builder) that
sold you the appliance.
Save time and money. Before you call for
service, check the Problem Solver Guide. It lists
causes of minor operating problems that you
can correct yourself.
IF YOU NEED SERVICE
NEXT, if you are still not pleased, write all the
details, including your telephone number, and
send it to:
We're proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are some
steps to follow for further assistance.
Customer Service
Avanti Products
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased. In
most cases, this will solve the problem.
10880 NW 30 Street
Miami, FL 33172 USA
4
PARTS AND FEATURES
1
2
3
4
5
6
7
8
Glass Door
Door Handle
Housing
Power Cord
Temperature Selector Knob
Function Selector Knob
Timer Selector Knob
Power Indicator Light
9
Foot (Total 4)
Oven Rack
10
11
12
13
14
15
16
Bake / Broil / Drip Pan (Total 2)
Rotisserie Rod
Rotisserie Forks (Total 2)
Rotisserie Fork Screws (Total 2)
Rotisserie Handle
Tray Handle
5
INSTALLATION INSTRUCTIONS
Before Using Your Appliance
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
2 Bake/Broil/Drip Pan
1 Oven Rack
1 Tray Handle
• 1 – Rotisserie Rod
• 2 – Rotisserie Forks with Screws
• 1 – Rotisserie Handle
1 Instruction Manual
Remove all the items inside your oven and clean the interior surface with lukewarm water using a soft
cloth.
Do not attempt to repair or replace any part of your oven unless it is specially recommended in this
manual.
This appliance requires 1700W and should be the only appliance operating on the circuit.
NOTICE
BEFORE YOU USE THIS OVEN FOR THE FIRST TIME: THE HEATING ELEMENTS HAVE A
PROTECTIVE COATING, WHICH MUST BE BURNED OFF BEFORE USE. TO DO THIS, OPEN
THE OVEN DOOR AND SET THE TEMPERATURE TO MAX. LEAVE THE APPLIANCE
SWITCHED ON FOR APPROXIMATELY 15 MINUTES. IT IS IMPORTANT TO ENSURE
ADEQUATE VENTILATION DURING PERIOD AS A BURNING SMELL IS NORMAL DURING
THIS PROCESS.
Installation of Your Appliance
Select a location for the appliance. The location should be in an open area on a flat counter where the
plug will reach an outlet.
When positioning the appliance, it should be set on a flat, steady surface.
Do not block air vents. If they are blocked during operation, the oven may overheat and eventually
cause the appliance failure.
Keep the appliance away from hot air, steam or splashing liquids when choosing a place to locate it,
otherwise, the unit’s operation may be adversely affected, causing it to break down.
Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption.
Plug the appliance into an exclusive properly installed grounded wall outlet. Any questions
concerning power should be directed toward a certified electrician or an authorized Avanti Products
service center.
Do not place anything on the top of the broiler oven and automatic toaster.
Keep the appliance at least 5 inches away from rear wall to ensure the proper ventilation.
Electrical Connection
The appliance has a polarized plug (One blade is wider than the other), to reduce the risk of electric
shock, this plug is intended to fit into the polarized outlet only one way. If the plug does not fit fully
into the outlet, reserve the plug. If it still does not fit, contact a qualified electrician. Do not attempt to
modify the plug in any way.
A short power cord is provided to reduce the hazards resulting from entanglement or tripping over a
longer cord. An extension cord may be used with care, however, be sure the marked electrical rating
is at least as great as the rating of this appliance. The extension cord should be positioned such that
it does not drape over the counter or tabletop where it can be pulled on by children or tripped over.
The electrical rating of this appliance is listed on the bottom panel of the appliance.
6
OPERATING YOUR APPLIANCE
Control Panel
TEMPERATURE CONTROL KNOB
Turn the knob clockwise to select the desired
temperature up to MAX. To switch off the heating
elements of oven turn the temperature control to
the “0” setting position.
FUNCTION SELECTOR KNOB
There are five (5) functions:
Select the appropriate function for your use.
CONVECTION BAKE
CONVECTION BROIL
BAKE BROIL
BROIL ROTISSERIE
CONVECTION
ROTISSERIES
TIMER SELECTOR KNOB
You can set cooking time up to 60 minutes. It will
automatically turn the oven
at the end of the
cooking time selected with the sound of a bell
signal.
To switch off the oven turn the timer selector to
the “
” setting position.
For cooking times greater than 60 minutes you
can use the “STAY ON” position, the oven will
operate in the selected function until you turn the
TIMER selector knob to the “
” position.
POWER INDICATOR LIGHT
The indicator will come
use.
when the oven is in
7
Using Your Oven
Be sure that the temperature is in the “0” position and the timer control knob is in the “OFF” position
before plugging the cord into the outlet for use and when unplugging the appliance after use.
Preheating The Oven
Turn the function selector control knob to the desired function either CONV. BAKE or CONV. BROIL.
Turn the temperature control knob to the desired temperature.
Turn the timer selector knob to the “20 minutes marking” for the oven to preheat.
NOTE:
For cooking times greater than 60 minutes, you can turn the time control knob in a counter-clockwise
motion to the “STAY ON” position.
When using the “STAY ON” position, the oven will continue to operate in the selected function and
temperature as previously selected until the timer selector knob is turned in a clockwise motion to the
“OFF” position.
Convection Bake
Both the TOP and BOTTOM heating elements are used.
Fan is used continuously (ON)
PREHEATING THE OVEN IS SUGGESTED WHEN USING THIS FUNCTION
Convection baking offers fast and more efficient cooking times when compared to standard conventional
baking. Convection bake provides a better overall and even result as the convection fan continuously
circulates the heated air around the food being cooked giving an even coverage and application of heat.
Convection baking can be used for all types of food but the best results will be seen in the overall taste
and quality of baked goods (breads, cookies etc).
Both the TOP and BOTTOM heating elements will cycle ON and OFF to maintain the appropriate heat
exposure and temperature.
USING THE CONVECTION BAKE FUNCTION
Arrange the food accordingly on the baking rack.
Turn the function selector knob to the Convection Bake function (icon as shown).
Turn the temperature selector knob to the desired oven temperature.
Turn the timer selector knob to the desired cooking time (Maximum 60 minutes).
At the end of the cooking time a bell signal will sound and the oven will turn off automatically.
After the cooking time has finished, open the door completely and carefully remove the food.
8
Convection Broil
Only the TOP heating element is used.
Fan is used continuously (ON)
NO PREHEATING PERIOD IS REQUIRED TO USE THIS FUNCTION
This function is best used to quickly defrost frozen foods or ingredients in preparation for further cooking
either in this oven or by other any other method.
The convection fan circulates the air heated by the TOP heating element (lower wattage output is used in
this function) around the food. This method of defrosting is faster, more efficient, and most importantly
more hygienic than most other forms of defrosting.
USING THE CONVECTION BROIL FUNCTION
Arrange the food on the broiler pan. Place the broiler pan on the oven rack.
Turn the function selector knob to the CONVECTION BROIL function (icon as shown).
Turn the temperature selector knob to the 250ºF oven temperature.
Turn the timer selector knob to the desired cooking time (Maximum 60 minutes).
Always cook food promptly after thawing.
At the end of the cooking time a bell signal will sound and the oven will turn off automatically.
After the cooking time has finished, open the door completely and carefully remove the food.
Bake Broil
Both the TOP and BOTTOM heating elements are used.
Fan is not used (OFF)
NO PREHEATING PERIOD IS REQUIRED TO USE THE TOAST FUNCTION
Both the TOP and BOTTOM heating elements will cycle ON and OFF to maintain the appropriate heat
exposure and temperature.
USING THE BAKE BROIL FUNCTION
Place the bread to be toasted directly on the rack in the center of the oven and close the door.
Turn the function selector knob to the BAKE BROIL function (icon as shown).
Turn the timer selector knob to either the appropriate shade of toast (Light, Medium, or Dark) (icon as
shown) or select the appropriate time cooking time as required (maximum 60 minutes).
At the end of the cooking time a bell signal will sound and the oven will turn off automatically.
After the cooking time has finished, open the door completely and carefully remove the food.
9
Broil Rotisserie
Only the TOP heating element is used.
Fan is not used (OFF)
Rotating Rotisserie is used (ON)
PREHEATING THE OVEN IS SUGGESTED WHEN USING THIS FUNCTION
Rotisserie - Broiling is a method of cooking tender cuts of meat by direct heat under the broil element of
the oven. The direct high heat cooks quickly and gives the food a rich, brown appearance.
• Rotisserie - Broiling is best suited for meats, fish, and/or poultry in cuts up to 1” thick.
USING THE BROIL ROTISSERIE FUNCTION
Mount the food to be cooked on the rotisserie rod. For best results the food should be placed in the
center of the rod. Secure the food using the rotisserie forks and tighten the fork screws to hold the
item in place while cooking.
Place the broiler pan on the oven rack to collect the natural dripping of grease and juices while
cooking.
Close the door to the first notch leaving approximately a 3 inch gap. This will ensure adequate airflow
during broiling.
Turn the function selector knob to the Broil Rotisserie function (icon as shown).
Turn the temperature selector knob to the desired oven temperature.
Turn the timer selector knob to the desired cooking time (Maximum 60 minutes).
At the end of the cooking time a bell signal will sound and the oven will turn off automatically.
After the cooking time has finished, open the door completely and carefully remove the food.
CONVECTION ROTISSERIE
Both the TOP and BOTTOM heating elements are used.
Fan is used continuously (ON)
Rotating Rotisserie is used (ON)
PREHEATING THE OVEN IS SUGGESTED WHEN USING THIS FUNCTION
Convection Rotisserie offers fast and more efficient cooking times when compared to standard
conventional rotisserie. Convection roasting provides a better overall and even result as the convection
fan continuously circulates the heated air around the food being cooked giving an even coverage and
application of heat. This function also gives you the option to use the rotating rotisserie to provide an
even more efficient application of heat.
USING THE CONVECTION ROTISSERIE FUNCTION
Mount the food to be cooked on the rotisserie rod. For best results the food should be placed in the
center of the rod. Secure the food using the rotisserie forks and tighten the fork screws to hold the
item in place while cooking. Place the broiler pan on the oven rack to collect the natural dripping of
grease and juices while cooking. If you prefer to roast the food in a fixed position (ie in a pan)
If you would prefer to roast the food in a fixed position (ie in a pan), arrange the food on the broiler pan.
Place the broiler pan on the oven rack.
Turn the function selector knob to the Convection Rotisserie function (icon as shown).
Turn the temperature selector knob to the desired oven temperature.
Turn the timer selector knob to the desired cooking time (Maximum 60 minutes).
When broiling, the food should be turned over about half-way during the selected cooking time.
At the end of the cooking time a bell signal will sound and the oven will turn off automatically.
After the cooking time has finished, open the door completely and carefully remove the food.
10
CARE AND MAINTENANCE
Cleaning Your Appliance
Before cleaning your appliance, unplug it and allow it to cool.
Remove the crumb tray, wire rack and drip/baking pan.
Use a damp cloth to wash the inside with warm water and a mild detergent. Do not Immerse in Water!
Abrasive cleaners, scrubbing brushes and chemical cleaners may damage the continuous clean coating
on this unit.
Wash the crumb tray, wire rack, drip/baking pan and metal handling tool with a mild detergent solution.
The glass oven door should be cleaned regularly with a non-abrasive liquid cleaner.
Rinse with a damp cloth and then a dry one.
The outside of the appliance should be cleaned with mild detergent and warm water.
CAUTION
Failure to unplug the appliance could result in electrical shock or personal injury.
Storing Your Appliance
Allow the appliance to cool completely before storing. If storing the appliance for long periods of time
make certain that the appliance is clean and free of food particles. Store the appliance in a dry location
such as on a table or countertop or in a cupboard shelf. Other than the recommended cleaning, no
further user maintenance should be necessary.
11
PROBLEMS WITH YOUR APPLIANCE?
You can solve many common appliance problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling the servicer.
TROUBLESHOOTING GUIDE
PROBLEMS
POSSIBLE CAUSES/SOLUTIONS
Appliance does not operate.
Unit not plugged in. Plug the unit into a 120V AC
electrical outlet.
The circuit breaker tripped or a blown fuse.
Be sure that the temperature, function and timer
selectors are set.
Only one heating element is heating up.
Function setting selection determines which heating
element will operate.
When toasting, make sure the oven is not set to
CONV.BROIL or CONV.BAKE setting.
Heating elements are not heating up.
Overcooked/undercooked Foods
Heating elements will cycle
proper heat. Make sure function selector is
positioned to the desired cooking setting.
and
to maintain
Incorrect temperature setting. You may have to
adjust the temperature to desired position.
Rack placement. Rack may need to be adjusted to
accommodate different foods.
Burnt Smell
Food build-up inside appliance, on heating elements
or in drip/baking pan. Refer to “Cleaning Your
Appliance”
SERVICE FOR YOUR APPLIANCE
We are proud of our customer service organization and the network of professional service technicians
that provide service on your Avanti appliances. With the purchase of your Avanti appliance, you can be
confident that if you ever need additional information or assistance, the Avanti Products Customer
Service team will be here for you. Just call us toll-free.
AVANTI PRODUCTS CUSTOMER SERVICES
Product Information
800-323-5029
Part Orders
Whatever your questions are about our products,
help is available.
You may order parts and accessories that will be
delivered directly to your home by personal
check, money order, Master Card, or Visa.
An Avanti Products authorized service center will
provide expert repair service, scheduled at a time
that is convenient for you. Our trained servicers
know your appliance inside and out.
800-220-5570
In-Home Repair Service
800-220-5570
12
YOUR AVANTI WARRANTY
LENGTH OF WARRANTY
WE WILL PAY FOR
FULL ONE YEAR WARRANTY FROM
DATE OF PURCHASE ON ALL PARTS
REPLACEMENT PARTS AND REPAIR
LABOR TO CORRECT DEFECTS IN
EXCEPT GLASS PARTS, AND/OR PARTS MATERIALS OR WORKMANSHIP.
DAMAGED AS A RESULT OF MISUSE
OR LACK OF REASONABLE CARE.
SERVICE MUST BE PROVIDED BY AN
AUTHORIZED SERVICE COMPANY.
FULL 30-DAY WARRANTY FROM DATE REPLACEMENT PARTS AND REPAIR
OF PURCHASE ON GLASS PARTS AND LABOR TO CORRECT DEFECTS IN
FINISH OF PORCELAIN ENAMEL,
MATERIAL OR WORKMANSHIP.
PAINTED OR BRIGHT METAL FINISHED SERVICE MUST BE PROVIDED BY AN
PARTS
AUTHORIZED SERVICE COMPANY.
CARRY IN SERVICE ONLY.
CUSTOMER WILL BE RESPONSIBLE FOR ALL TRANSPORTATION CHARGES TO
AND FROM THE AUTHORIZED SERVICE COMPANY, ALSO MAKE SURE TO SEND
A COPY OF PROOF OF PURCHASE WHEN SENDING THE UNIT FOR SERVICE
REPAIRS.
AVANTI PRODUCTS SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so
this exclusion or limitation may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights that vary from state to state.
This warranty is not valid outside the Continental United States.
13
INSTRUCCIONES EN ESPAÑOL
PARA REDUCIR EL RIESGO DE
PRECAUCIONES IMPORTANTES
INCENDIO, DESCARGA ELECTRICA,
O DAÑO CUANDO ESTE USANDO SU
HORNO SIGA ESTAS INDICACIONES.
CUANDO USE APARATOS ELECTRICOS, SIEMPRE DEBEN TOMARSE ALGUNAS
PRECAUCIONES BASICAS DE SEGURIDAD, INCLUYENDO LAS SIGUIENTES:
Lea todas las instrucciones, las etiquetas en el producto y las advertencias, antes de usar el
horno tostador.
No recomendamos el uso extensiones de cordón eléctrico para operar esta unidad.
No toque las superficies calientes. Siempre use guantes cuando maneje materiales calientes y
permita que las partes metálicas se enfríen antes de limpiar. Permita que la unidad se enfríe
completamente antes de poner o quitar partes.
Desconecte el horno tostador de la toma de corriente cuando la unidad no esté en uso y antes de
limpiarla. Nota: Verifique que el horno tostador esté apagado antes de desconectarlo.
Para protegerse contra una descarga eléctrica, no sumerja el aparato en agua o en otros líquidos.
Supervisión continua es necesaria cuando este o cualquier otro aparato sea usado cerca de niños.
Este aparato no debe ser usado por niños.
No opere este ni ningún otro aparato con un cordón dañado o quemado o después de que el
aparato ha funcionado inadecuadamente o ha sido dañado en cualquier forma.
No utilice accesorios o aditamentos no recomendados por el fabricante, ya que pueden causar
incendios, descargas eléctricas o lesiones personales.
No se use en exteriores o con propósitos comerciales.
No use este aparato más que para lo que ha sido diseñado.
No permita que el cordón cuelgue sobre la orilla de la mesa o del mostrador o toque superficies
calientes.
No lo coloque sobre o cerca de quemadores de estufas de gas o eléctricas, tampoco dentro de un
horno caliente.
Tenga extremo cuidado cuando use recipientes de vidrio o metal.
Puede ocurrir un incendio si el horno tostador está en operación y en contacto o cubierto con
materiales inflamables, incluyendo cortinas, tapicería, paredes, etc. No coloque ningún objeto sobre
el aparato cuando esté en operación.
Cuando esta unidad no esté en operación, no almacene ningún material que no sea un accesorio
recomendado por el fabricante.
No coloque dentro del horno ningún material inflamable como papel, cartón, plástico o cualquier
material que se pueda incendiar o derretir.
No cubra la bandeja para migajas o ninguna parte del horno con papel aluminio o metálico. Esto
puede causar el sobrecalentamiento del aparato.
Los alimentos grandes o utensilios metálicos no deben ser introducidos en el horno tostador ya que
pueden causar incendios o descargas eléctricas.
No limpie con esponjas o fibras metálicas. Se pueden desprender piezas de la esponja o fibra y
tocar partes eléctricas creando el riesgo de descargas eléctricas.
Cuando prepare alimentos, tenga cuidado extremo al remover la bandeja o al desechar la grasa
caliente.
Para apagar este aparato, coloque todos los controles en las posiciones “0” or “OFF”.
-Esta Unidad Es Sólo Para Uso Doméstico-
Para reducir el riesgo de descarga eléctrica, este equipo posee una instalación polarizada, lo cual requiere que la
persona que instale esta unidad la conecte apropiadamente a tierra sin invertir la posición de los cables.
14
PREPARANDO SU HORNO TOSTADOR
Si usted está usando su horno tostador por primera vez, por favor asegúrese de:
Quitar todas las etiquetas de la superficie de su tostador.
Abra la puerta del tostador y saque los documentos impresos y papeles del interior del horno tostador.
Limpie la rejilla, charola y bandeja con agua caliente y una pequeña cantidad de detergente líquido para
lavar platos, utilice una esponja suave y no abrasiva. No sumerja el horno tostador en el agua.
Seque completamente la unidad antes de utilizarla.
AVISO
ANTES DE USAR LA UNIDAD POR PRIMERA VEZ. LOS ELEMENTOS CALENTADORES
TIENEN UNA CAPA PROTECTIVA QUE NECESITA SER QUEMADA ANTES DE USAR EL
HORNO.
PARA REMOVER LA CAPA PROTECTIVA:
ABRA LA PUERTA.
GIRE LA PERILLA DE CONTROL DE TEMPERATURA A 250ºC/480ºF.
GIRE LA PERILLA DE CONTROL DE TIEMPO A 15 MINUTOS.
USTED SENTIRA UN OLOR A QUEMADO, ESTO ES NORMAL.
ASEGURESE TENER VENTILACION ADECUADA MIENTRAS HAGA ESTE PROCESO.
Seleccione un lugar para colocar el horno tostador. El lugar debe ser una área abierta sobre un mostrador
con superficie plana donde el enchufe tenga alcance a una toma de corriente.
Enchufe el cable en un tomacorriente de 120 voltios / 60 ciclos.
CALENTAMIENTO PREVIO DEL HORNO
Coloque la parrilla en la posición deseada antes de calentar el horno tostador.
Gire la perilla de control de temperatura y colóquela en la temperatura deseada.
Gire la perilla selectora en la función deseada.
Gire la perilla del reloj a la posición que aproxima 15 MINUTOS.
HORNEADO CON CONVECCION
Seleccione la posición deseada de la parrilla (consulte la sección de colocación de la parrilla).
Gire la perilla de control de temperatura al nivel deseado.
Gire la perilla selectora de función en la posición de hornear con convección o “CONV BAKE”. Ambos
elementos calentadores, el superior y el inferior y el ventilador interno estarán en funcionamiento.
NOTA – Los elementos calentadores superiores e inferiores se encenderán y apagarán alternadamente
para mantener una temperatura moderada.
Coloque los alimentos en la parrilla metálica o dentro de la bandeja para hornear.
El reloj puede seleccionarse para que esté operando hasta por 60 minutos. Al final del ciclo de cocción,
emitirá una señal auditiva y el horno se apagara automáticamente, usted puede repetir el ciclo de tiempo
si fuera necesario.
Cuando se haya completado el horneado, abra la puerta completamente y saque los alimentos. Cuando
esté descongelando alimentos, no caliente el horno previamente. Gire el control de temperatura y
colóquelo en 250ºF (120ºC).
Permita que cada lado de las carnes o pescados se descongele de 15 a 20 minutos. Siempre cocine los
alimentos inmediatamente después de descongelar.
15
ASADO CON CONVECCION
Seleccione la posición deseada de la parrilla.
Gire la perilla de control de temperatura y colóquela en el nivel de temperatura deseado.
Gire la perilla selectora de función en la posición de asado con convección o “CONV BROIL”.
Gire la perilla del reloj hacia el tiempo deseado.
Solamente el elemento calentador de la parte superior y el ventilador interior estarán en funcionamiento.
Coloque la parrilla para asar, encima de la bandeja para hornear. Luego coloque los alimentos. Sobre la
parrilla para asar.
El reloj puede seleccionarse para que esté operando hasta por 60 minutos. Al final del ciclo de cocción,
emitirá una señal auditiva y el horno se apagará automáticamente. Si la cocción requiere más tiempo
repita el ciclo.
Es recomendable siempre voltear los aumentos a la mitad del ciclo de cocción.
Cuando se haya completado la cocción, abra la puerta completamente y saque los alimentos
cuidadosamente.
HORNEADO / ASADO
NOTA – No es necesario un período de calentamiento previo antes de tostar.
Seleccione la posición deseada de la parrilla.
Gire la perilla selectora de función en la posición de horneado / asado o “BAKE - BROIL”. Gire la perilla
del reloj al tiempo deseado. Ambos elementos calentadores superior y el inferior estarán en
funcionamiento.
Coloque los alimentos en la parrilla metálica.
NOTA – Los elementos calentadores superiores e inferiores se encenderán y apagarán alternadamente
para mantener una temperatura moderada.
Cuando se haya completado el tostado, abra la puerta completamente y saque los alimentos.
ASADO/ROSTISADO
Seleccione la posición deseada de la parrilla. Coloque los alimentos y cierre la puerta colocándola en la
primera parada, dejando aproximadamente un espacio de 3 pulgadas en la parte superior. Esto
asegurará que el aire fluya de manera adecuada durante este proceso.
Gire la perilla de control de temperatura y colóquela en el nivel de temperatura más alto.
Gire la perilla selectora de función en la posición de asado / rostisado o “BROIL – ROTISS”. Gire la
perilla del reloj hacia el tiempo deseado. Solamente el elemento calentador de la parte superior estará en
funcionamiento.
Coloque la bandeja para hornear, encima de la parrilla para asar. El reloj puede seleccionarse para que
esté operando hasta por 60 minutos. Al final del ciclo de cocción, emitirá una señal auditiva y el horno se
apagará automáticamente. Si la cocción requiere más tiempo repita el ciclo.
Cuando se haya completado la cocción, abra la puerta completamente y saque los alimentos
cuidadosamente.
16
ASADO con CONVECCION
Gire la perilla de control de temperatura al nivel deseado.
Gire la perilla selectora de función en la posición de asado con convección o “Convection Rotiss”. Ambos
elementos calentadores, el superior y el inferior y el ventilador interno estarán en funcionamiento.
Coloque los alimentos en la parrilla metálica o dentro de la bandeja para hornear.
El reloj puede seleccionarse para que esté operando hasta por 60 minutos. Al final del ciclo de cocción,
emitirá una señal auditiva y el horno se apagara automáticamente, usted puede repetir el ciclo de tiempo
si fuera necesario.
Cuando se haya completado el horneado, abra la puerta completamente y saque los alimentos.
LIMPIEZA DE SU HORNO TOSTADOR
Antes de limpiar su Horno Tostador, desconéctelo y permita que se enfríe. Limpie con un paño suave y
húmedo. No lo sumerja en agua! Asegúrese de usar solamente jabón suave y agua. Los limpiadores
abrasivos, cepillos y limpiadores químicos pueden dañar el acabado de esta unidad. Vacíe la bandeja
para migas frecuentemente para evitar la acumulación de residuos.
ALMACENANDO O GUARDANDO SU HORNO TOSTADOR
Deje que el aparato se enfríe completamente antes de almacenarlo. Si va a almacenar el horno tostador
por períodos prolongados, asegúrese de que no contenga partículas o residuos de alimentos. Almacene
el horno tostador en un lugar seco como encima de una mesa, mostrador, o sobre una repisa. Enrolle el
cordón eléctrico. No es necesario otro tipo de mantenimiento que no sea la limpieza recomendada en
este manual.
17
PROBLEMAS
Cocción excesiva o insuficiente de los alimentos.
POSIBLES CAUSAS/SOLUCIONES
Temperatura o tiempo incorrectos.
Usted debe asegurarse que el botón de
temperatura esté posicionado a la temperatura
deseada.
Debido a que su horno tostador es más
pequeño que los hornos regulares este se
calentará más pronto y generalmente cocinará
en períodos de tiempo más cortos.
Olor a quemado.
Si el olor se ocurre en cuando Ud. usa el horno
por primera vez, esto es normal (Consulte la
sección “Preparando su horno tostador”
Acumulación de residuos de alimentos en el
interior del horno, en los elementos calentadores o
en la parrilla para migas.
Consulte la Sección “Limpieza de Su Horno
Tostador”
El horno no inicia su operación
La unidad está desconectada.
Enchufe el horno tostador en una toma de
corriente eléctrica 120V / 60Hz.
Coloque la perilla de la temperatura en la
posición deseada. Todos los demás controles
deberán estar encendidos.
Solamente un elemento calentador se calienta.
El elemento calentador no se mantiene encendido.
La selección de la función determina cual elemento
calentador operará.
Cuando tueste alimentos, asegúrese de que el
horno no se encuentre en la función de asado.
Los elementos calentadores se encenderán y se
apagarán para mantener la temperatura adecuada.
Asegúrese de que la función seleccionada es
la función que desea utilizar.
18
Registration Information
Thank you for purchasing this fine Avanti product. Please fill out this form and return it to the following
address within 100 days from the date of purchase and receive these important benefits:
Avanti Products, A Division of The Mackle Co., Inc.
P.O.Box 520604 – Miami, Florida 33152
Protect your product:
We will keep the model number and date of purchase of your new Avanti product on file to help
you refer to this information in the event of an insurance claim such as fire or theft.
Promote better products:
We value your input. Your responses will help us develop products designed to best meet your
future needs.
-------------------------------------------------------(detach here)-----------------------------------------------------------------
Avanti Registration Card
Name
Model #
Serial #
Address
Date Purchased
Store / Dealer Name
City
State
Zip
E-mail Address
Occupation
Area Code
Phone Number
Did You Purchase An Additional Warranty
As your Primary Residence, Do You:
Extended
Own
Rent
None
Your Age:
Reason for Choosing This Avanti Product:
Please indicate the most important factors
That influenced your decision to purchase this
product:
under 18 18-25 26-30
31-35
36-50 over 50
Marital Status:
Married Single
Price
Product Features
Is This Product Used In The:
Avanti Reputation
Home
Business
Product Quality
Salesperson Recommendation
Other: ___________________
Friend / Relative Recommendation
Warranty
How Did You Learn About This Product:
Advertising
In-Store Demo
Personal Demo
Other: ___________________
Comments:
19
VER 02-09142010
PRINTED IN CHINA
20
|