A. Introduction
Thank you for choosing the D1718ES portable DVD player. The main
features include a 7" Wide Screen (16:9Aspect Ratio) Liquid Crystal
Display (LCD) monitor and a DVD player. The unit applies the latest
state of the art electronics and is designed for use in hotels, offices
or your home. The unit is constructed to provide years of reliable,
trouble-free service, and is compact so that you can take it with you
anywhere and is designed forquick and easy installation. Please read
the entire instruction manual supplied with this product prior to using.
The documentation will assist you in installing the system properly to
obtain the best equipment performance. Please save this manual for
later use.
B. Cautions and Warnings
1. Placement
To prevent fire or electric shock, do not expose this appliance to
rain or moisture. Do not place the set on an unstable cart, stand,
tripod, bracket or table to prevent it from falling. Keep the unit away
from strong magnets, heatsources, direct sunlight, excessive dust.
If the unit is brought directly from a cold to a warm location, mois-
ture may condense inside the unit. When you move it from a cold
to a warm location, wait for about one hour before operating the
unit, or remove the disc and leave the unit turned on until the mois-
tureevaporates.
2. Installation
Ensure that the D1718ES is used in accordance with the instruc-
tions and illustrations provided in this manual.
3. Objects and Liquids
Do not push objects of any kind into the unit through openings; do
not spill or spray liquid of any kind on or in the system (this may
result in a fire or electric shock). Do not place anything heavy on
the unit. To ensure proper ventilation and proper operation, never
cover or block the slots and openings with a cloth or other material.
4. Disassembly
3
Do not attempt to disassemble the cabinet. There is a risk of elec-
tric shock and/or exposure to Laser Radiation. Contact qualified
service personnel if your system is in need of repair.
5. Cleaning Unit
When cleaning, make sure the system is unplugged from the power
source. Do not use liquid cleaners or aerosol cleaners. Use a cloth
lightly dampened with water for cleaning the exterior of the system
only.
6. Disc
Do not use irregularly shaped discs such as heart or star-shaped
discs as they may cause the unit to malfunction. Do not stick paper,
tape or glue on the disc. Do not expose the disc to direct sunlight
or heat sources. Do not touch the surface of disc. Handle the disc
by its edge. Clean the disc by wiping the disc from the center out
with a cleaning cloth. Remove the disc from the unit and store it in
its case after playing. Some playback operations of discs may be
intentionally fixed by software producers. Since this unit plays discs
according to the disc contents the software producers designed,
some playback features may not be available. Also refer to the in-
structions supplied with the discs.
7. Regional Coding
Both the DVD player and disc are coded by region. These
regional codes must match in order for the disc to play. If the
codes don’t match, the disc won’t play. This unit’s code is region
1. DVD’s with other regional codes cannot be played in this unit.
4
C. Contents
1. 1 x7’’ LCD Monitor & DVD Player Combo
2. 1 x7” LCD Monitor
3. 2 xAC to DC Adapter
4. 1 xRemote Control with battery (CR2025)
5. 1 xInstruction Manual
6. 1 xAV Adapter Cable (One to Three Female)
7. 1 x AV Adapter Cable (One to Three Male)
8. 1 xY Type DC Power Adapter
9. 1 xRechargeable Battery
10. 1 x Mounting Bag With Straps for the Monitor
11. 1 x Carry Bag With Straps
D. Powering and installation
1. Powering the system indoors (Refer to Figure 1)
Plug one end of the AC to DC adapter into the DC 9V jack on the
right side of the main unit, then plug the other end into a 120V
AC power outlet.
The monitor can also be powered in the same manner.
2. Powering the system in a car (refer to Figure 2)
Plug one end of the DC power adapter into the DC 9V jack
on the main unit, then plug the other end into the vehicle power
socket.
Single Monitor
Main Unit
Figure 1
5
E. Vehicle Installation
Installing the DVD Player and monitor onto a car seat
(Refer to Figures 3 through 5)
Carry Bag Opened
Carry Bag Closed
Elastic
Straps
Vehicle Headrest
Headrest Strap
Seat Back
Strap
Vehicle Seat
Back
Figure 3
1). Unfold the carry bag, and place the DVD player on the bag
beneath the elastic straps. Ensure that the unit’s corners are
secured by the elastic straps.
2). Secure the upper portion of the carry bag to headrest support
bars using the headrest strap. Adjust the headrest strap until the
bag is firmly secured.
3). Secure the lower portion of the carry bag to the vehicle seat back
using the seat back strap. Adjust the seat back strap until the
bag is firmly secured.
7
Installing the monitor
Option 1 Vehicle Headrest (Refer to Figure 4)
Figure 4
Slide the Monitor into the pouch and attach the Velcro straps to se-
cure the Monitor in the pouch. Loop the strap of the pouch around the
headrest and pull the end of the strap while holding the buckle to
secure the pouch to the headrest
Option 2 Flat Surface (Refer to Figure 5)
Figure 5
Rotate the base of Monitor backward and place on a flat surface.
Adjust the screen for a proper viewing angle. This can be done with
the Monitor inside or outside the pouch.
8
F. Controls, Indicators, and Connectors
1. Unit View (Refer to Figure 6)
Figure 6
1) Menu Button
2) Up/Down/Left/Right/OK
Buttons
8) Power On/Off Switch
9) Brightness Up/Down Control
10) Volume Up/Down Control
11) Headphone Jack 1
12) Headphone Jack 2
13) E-Port
14) AV In/Out Switch
15) AV In/Out Jack
16) DC Input Jack
3) Open Button
4) Previous/Next/Pause/
Stop/Play Buttons
5) Screen Mode Button
6) Remote Sensor
7) Power Indicator
9
3. Remote Control View (Refer to Figure 8)
1) Setup Button
2) Up Button
3) Previous Button
4) Enter Button
5) Reverse Scan /Left Button
6) Down Button
7) Numeric Keypad
8) Display Button
9) Zoom Button
10) Subtitle Button
11) Next Button
12) A-B Repeat Button
13) Forward Scan /Right Button
14) 1/All Repeat Button
15) Stop Button
16) Menu Button
17) Audio Button
18) Angle Button
19) Play/Pause Button
Figure 8
G. Loading and Playing a Disc
a. After connecting power to the unit, power on the DVD player with
the power switch. The power indicator will light.
b. Open the disc tray by pressing OPEN , and place a disc into the
tray with the label side facing up.
c. Close the tray by pressing the “PRESS” button.The unit will load
the disc and start playing.
d. Rotate the BRIGHTNESS and VOLUME controls to adjust the
LCD’s brightness and the DVD player’s volume.
e. To stop playing a disc, press STOP.
f. To turn off the DVD player, slide the POWER ON/OFF to OFF.
The DVD player’s POWER indicator turns off.
11
H. SETUP
Press ‘SETUP’ to display the Main screen of the SETUP Menu on the
screen. Press ‘SETUP’ again to exit the SETUP Menu and the unit
will resume it’s last playback mode.
Main Setup Menu Screen
1) Press ‘SETUP’, the ‘General Setup Page’ will display on screen.
a).Select ‘TV Display’ using the UP/DOWN button, and then press
RIGHT to enter the submenu. Select the TV display mode on the
screen using UP/DOWN, and press ENTER to confirm the set-
ting. Press LEFT to return.
* Normal/PS: When the player is connected to a normal TV, and
a wide picture is shown on the full screen.
* Normal/LB: When the player is connected to a normal TV, and
a wide picture is shown on the screen with a black strip at both
the top and bottom of the screen.
* Wide: When the player is connected to a wide screen TV, a
wide picture is shown on the full screen.
TV Display Screen
12
b).Select ‘Angle Mark’ using the UP/DOWN buttton, and then press the
RIGHT button to enter the submenu. Choose Angle Mark on or off
using the UP/DOWN button and then press ENTER to confirm the
setting. Press the LEFT button to return.
Angle Mark Screen
* On: The screen will show the angle mark icon. (*If an angle
option is available).
Off: The screen will not display the Angle Mark
NOTE: Not all discs contain the features above. The above
features are disc dependent.
c). Select ‘Screen Saver’ using the UP/DOWN button.
Screen Saver Screen
*On: Enable screen saver
*Off: Disable screen saver (off)
*NOTE: The DVD player will enter the Screen Saver mode after ap-
proximately five minutes if the same image remains on the screen.
13
d). Select ‘Last Memory’ by UP/DOWN button.
State
Last Memory Screen
*On: The unit will return to the last position on the disc.
*Off: The unit will not return to the last position on the disc.
2) Select ‘Video Quality Setup’ by using the LEFT/RIGHT button, press
ENTER to enter the video quality setup page.
Video Quality Setup Menu Screen
a).Select ‘Brightness’ by using the UP or DOWN button, then press
ENTER. You can change the Brightness by pressing the LEFT or
RIGHT button. To exit Brightness Setting, press ENTER again to
return the main Menu.
Brightness Screen
14
b).Select ‘Contrast’ by using the UP or DOWN button, then press ENTER.
You can adjust the Contrast by pressing the LEFT or RIGHT button.
To exit ‘Contrast’ Setting, press ENTER again to return the main Menu.
c).Select ‘Hue’ by using the UP or DOWN button, then press ENTER.
You can adjust the Hue by pressing the LEFT or RIGHT button.
Hue Screen
To exit ‘Hue’ Setting, press ENTER again to return the main Menu.
d).Select ‘Saturation’ by using the UP or DOWN button, then press EN-
TER. You can adjust the Saturation by pressing the LEFT or RIGHT
button.
To exit ‘Saturation’ setting, press ENTER again to return to the main
Menu.
15
3).Select ’Password’ using the LEFT or RIGHT button, then press the
ENTER button to enter ’Password Setup Page’.
Password Change Menu Screen
Press ENTER to enter the Password Change Page. Input the Old
Password or the Default Password, the New Password, and the Con-
firmed New Password. Press ENTER to confirm the change.
Password Change Menu Screen
NOTE: The default password is 3308.
4).With no disc inside the player select ’Preference’ using the LEFT or RIGHT
button, then press ENTER to enter the preference page.
a. Select ‘Audio’ using the UP/DOWN button, then press RIGHT to
enter the submenu. Select the audio language you desire using the
UP or DOWN button, then press ENTER to confirm the setting.
Press LEFT to return.
Preference Audio Language Screen
16
b. Select ‘Subtitle’ the using the UP or DOWN button, then press RIGHT
to enter the submenu. Select the desired subtitle language or Sub-
title Off using the UP or DOWN button, then press ENTER to con-
firm the setting. Press LEFT to return.
Preference Subtitle Language Screen
c. Select ‘Disc Menu’ using the UP or DOWN button, then press
RIGHT to enter the submenu. Select the Disc Menu Language
you desire using the UP or DOWN button, then press ENTER
to confirm the setting. Press LEFT to return.
Preference Disc Menu Language Screen
Note: Language and subtitle selection is only available for discs that
are recorded in the above listed languages. If the selected language
is not available, the player will play and display on the screen the origi-
nal recorded language contained in the disc.
17
d. Select ‘Parental’ using the UP or DOWN button, then press RIGHT to
enter the submenu.
Parental Preference Screen
Select the parental level you desired using the UP or DOWN button
for discs with lock-out function or multiple rating levels. These are
listed from the lowest level (1 Kid Safe) to the highest level (Adult).
Enter a 4 digit password, then press ENTER to confirm the parental
level setting.
NOTE: The level of 8 Adult is the factory default.
e. Select ‘Default’ using the UP or DOWN button, then press RIGHT to
enter the submenu. Press ENTER to make the setting return to the
factory-set mode.
NOTE: The parental setting is not affected by the default reset
function.
Loading Factory Setting Screen Display
NOTE: The Default Password is 3308. This password is always ef-
fective even after you have selected your own password and changed
it. To avoid the possibility of others using the default password to set
the parental level and change the password, you can record this
default password in another area and delete it from this manual. Some
discs can be limited depending on the age of users while some discs
cannot.
18
1. Basic Operation
Turn the unit on/off
Remove/load the disc
POWER
OPEN
PLAY
SLOW
PAUSE
STOP
Start Play/Execute item or setting
Play at 1/2, 1/4, 1/8 or 1/16 times speed
Still Picture
(1 time) Stop at the present playing point /
(2 times) Stop playing
SKIP+(NEXT)
Go to the next chapter, track or scene dur-
ing play back
Go back to the previous chapter, track or
scene during playback
SKIP-(PREVIOUS)
FORWARD
REVERSE
Scan forward at 2, 4, 8,16 or 32 times speed
Scan backward at 2, 4, 8, 16 or 32 times
speed
LEFT/RIGHT/UP/DOWN Used for Menu Navigation
Execute item or confirm setting
Select item or setting
Return
Display the main menu of the disc
Repeat playing title, chapter, or track
RepeataspecificportionfrompointAtopoint
B of the disc
ENTER
NUMBERS
RETURN
MENU
REPEAT
A-B
DISPLAY
Display information (title, chapter, track,
time, etc.).
Change the viewing angles on the scene
Select the subtitle language and turn it on/
off
ANGLE
SUBTITLE
Select the audio language
Enlarge an image to 2, 3, or 4 times the
original size.
AUDIO
ZOOM
Display the setup menu to select and set
items, and exit the setup menu.
SETUP
19
2. MENU
A DVD is divided into sections called titles and chapters. When you
play a DVD, a root menu of the disc will appear on the screen of your
TV or Monitor. The contents of the menu vary from disc to disc. Press
MENU during playback to display the menu. Some DVDs only allow
you to select disc playback options using the DVD root menu.
3. DISPLAY
1. PLAYING TIME AND REMAINING TIME
a. During playback press the ‘DISPLAY’ button to display the cur-
rent Title Number (1), the total Number of Titles (2), the current
Chapter Number (3), the total Number of Chapters (4), and the
Playing elapsed Time for the title (5). The heading will disappear
automatically after 3 seconds if the ‘Display’ button is not pressed.
Title, Chapter Number, and Time Screen Display
b. Press ‘DISPLAY’ again to display the RemainingTime of the title.
The heading will disappear automatically in 3 seconds.
Title Remaining Time Screen Display
16
c. Press ‘DISPLAY’ a 3rd time to display the Elapsed Time for the
chapter. The heading will disappear automatically in 3 seconds.
Chapter Elapsed Time Screen Display
d. Press ‘DISPLAY’ a 4th time to display the Remaining Time for the
chapter. The heading will disappear automatically in 3 seconds.
Chapter Remaining Time Screen Display
e. Press ‘DISPLAY’ a 5th time to exit, ‘DISPLAY OFF’ will be dis-
played and will disappear automatically in 3 seconds.
2. ANGLE
During playback of a disc, press ‘ANGLE’ to display the available angles
for discs containing multi-angles*, with the current angle number (1)
and the total number of angles (2) displaying. Press ‘ANGLE’ to se-
lect another angle, then press again to exit and return to the normal
viewing angle. The angle mark will disappear automatically if the
‘ANGLE’ button is not pressed again in 3 seconds.
*NOTE: Not all discs contain this feature.
21
Angle Screen Display
3. SUBTITLE
During disc playback press ‘SUBTITLE’ to select the subtitle language
you desire*, with the current Subtitle Language Number (1) and the
total Number of Subtitle Languages (2) displayed. If there are mul-
tiple languages press ‘SUBTITLE’ again to select another subtitle lan-
guage. To turn subtitles OFF, press the‘SUBTITLE’ button until ‘SUB-
TITLE OFF’ is displayed. The Subtitle display will disappear automati-
cally if the ‘SUBTITLE’ button is not pressed again within 3 seconds.
Subtitle Screen Display
* Some DVDs only allowaccessto thisfunctionthroughthe DVDmenu.
22
4. AUDIO
During playback press ‘AUDIO’ to select the audio language you
desire*, with the current Audio Channel Number (1) and the total num-
ber of Audio Channels (2) displayed. Press AUDIO again to select
another audio language. The audio display will disappear automati-
cally if the ‘AUDIO’ button is not pressed within 3 seconds.
Audio Language Screen Display
* Some DVDs only allow access to this function through the DVD
menu.
5. ZOOM
During playback press ‘ZOOM’ to enlarge the picture by 2x, 3x or 4X
with the current zoom multiple. (1) Press “zoom”one time, the
picture will be enlarged 2X. (2) Press “zoom” a second time, the
picture will be enlarged 3X. (3) Press “zoom” a 3rd time, the picture
will be enlarged 4X. (4) Press “zoom” a 4th time, the picture will re
turn to normal size.
Zoom Screen Display
23
6. A-B REPEAT
a. During playback press first time ‘A-B’ to set the Starting Point A.
A-B Repeat Starting Point Screen Display
b. Press ‘A-B’second time to set the Ending Point B and the layer will
repeatedly play the part between Point A and Point B.
A-B Repeat Ending Point Screen Display
c. Press A-B a third time to cancel A-B repeat and resume normal
playback.
A-B Repeat Cancelled Screen Display
24
7. REPEAT
a. During playback press ‘REPEAT’ once to repeatedly play the cur-
rent chapter.
Chapter Repeat Screen Display
b. During playback press ‘REPEAT’ again to repeatedly play the current
title.
Title Repeat Screen Display
c. During playback press ‘REPEAT’ a 3rd time to repeat all Chapters
and Titles.
All Repeat Screen Display
25
d. Press “REPEAT” a 4th time, to resume normal play.
Repeat Off Screen Display
4. PLAYING AUDIO CDS
When playing an audio CD press the DISPLAY button on the remote to
view time information. The options below show you what information is
available using this function.
a. The current track and playing timeof that track will be displayed on
the screen.
Single Elapsed Screen Display
b.Press ‘DISPLAY’ one time and Single Remain appears along with
the current track playing and the amount of time left.
Single Remain Screen Display
26
c. Press ‘DISPLAY’ a 2nd time and Total Elasped appears along with the
current track playing and the total time that the CD has been playing.
Total Elapsed Screen Display
d. Press ‘DISPLAY’ a 3rd time and Total Remain appears along with the
current track playing and the amount of time remained on the CD.
Total Remain Screen Display
e. Press ‘DISPLAY’ a 4th time and “ Display Off” will appear momentarily
then disappear. The CD time Information will not be displayed.
USING THE REPEAT FEATURE
The default mode for the Repeat feature is Off. Pressing REPEAT
consecutively changes the repeat options:
• Track- repeats the track that is playing.
• All- repeats the disc that is playing.
• Off
As you toggle through the options, the repeat option changes. The selected
repeat option loops repeatedly until you turn it off.
27
5. PLAYING MP3 DISCS
MP3 is a format for storing digital audio. An audio CD-quality song is
compressed into the MP3 format with very little loss of audio quality
while taking up much less disc space. CD-R /RW discs that have
been encoded in MP3 format are compatible with this system.
Playback modes:
Folder (normal playback)
Single
Repeat One (repeat playback of a song)
Repeat Folder (repeat playback of a specific folder)
Insert a MP3 CD, the DVD player will initialize the disc and the directory
(folder) will be shown on the TV screen.
MP3 MENU Screen Display
When a MP3 disc is inserted into the unit, the menu screen appears
automatically. You can use the menu screen to change folders and
songs. The system plays the songs in the order they were burned
onto the disc.
1. Press the
or button to choose a folder from the folder list
on the left side of the screen.
2. Press ENTER to select the highlighted folder. The songs avail-
able under the folder will be listed.
3. Use
or
button to choose a song from the list. Press
ENTER to select and begin playback of the highlighted song.
28
4.Use the
(PREVIOUS) button to move to the beginning of the previous
song.
( NEXT ) button to move to the next song. Press the
USING THE REPEAT FEATURE
The default mode is Folder. Pressing REPEAT consecutively changes
the repeat options:
• Single
• Repeat One
• Repeat Folder
• Folder
As you toggle through the options, the repeat option changes. The
selected repeat option loops repeatedly until you turn it off.
NOTICE
“
” icon in front of a file name indicates that this is a folder, not an
MP3file.
“MP3” icon in front of a file name indicates that this is a MP3 file.
29
6. PLAYING JPEG FILE
1) Load the JPEG Disc into tray.
2) Select JPEG file by pressing “UP/DOWN” button.
3) You can preview the JPEG file by pressing “Play” or “ENTER”.
4) Pressing the “Left Key“ will rotate the picture 90 degrees
counterclocckwise. Pressing the “Right Key“ will rotate the
picture clockwise.
5) When browsing the photos, you can reverse the photo horizontally
by pressing “Up” key,or you can reverse the photos vertically by
pressing “Down” key.
6) When you browse the JPEG file, press “display”, there will be diffe-
rent refresh mode below.
a. Press “display” first time, “WIPE TOP” will display on the screen,
the picture will refresh from top to bottom.
b. Press “display” 2nd time, “WIPE BOTTOM” will display on the
screen, the picture will refresh from bottom to top.
c. Press “display ” 3rd time, “WIPE LEFT” will display on the screen,
the picture will refresh from left side to right side.
d. Press “display ” 4th time, “WIPE RIGHT” will display on the
screen, the picture will refresh from right side to left side.
e. Press “display” 5th time, “DIAGONAL WIPE LEFT TOP” will dis-
play on the screen, the picture will refresh from left top to right
bottom.
f. Press “ display ” 6th time, “DIAGONAL WIPE RIGHT TOP” will
display on the screen, the picture will refresh from right top to left
bottom.
g. Press “display ” 7th time, “DIAGONAL WIPE LEFT BOTTOM”
will display on the screen, the picture will refresh from left bottom
to right top.
h. Press “display ” 8th time, “DIAGONAL WIPE RIGHT BOTTOM”
will display on the screen, the picture will refresh from right bot-
tom to left top.
i. Press “display” 9th time, “EXTEND FROM CENTER H” will dis-
play on the screen, the picture will refresh from horizontal center
to both sides.
j. Press “display” 10th time, “EXTEND FROM CENTER V” will
display on the screen, the picture will refresh from vertical cen-
ter to both sides.
30
k. Press “display” 11th time, “COMPRESS TO CENTER H” will
display on the screen, the picture will refresh from top and bot-
tom to center.
l. Press “display” 12th time, “COMPRESS TO CENTER V” will
display on the screen, the picture will refresh from right and left
to center.
m.Press “display” 13th time, “WINDOW H” will display on the
screen, the picture will refresh from four window’s top side to
bottom side.
n. Press “display” 14th time, “WINDOW V” will display on the screen,
the picture will refresh from four window’s left side to right side.
o. Press “display” 15th time, “WIPE FROM EDGE TO CENTER”
will display on the screen, the picture will refresh from 4 edges to
center.
7) When previewing the file, pressing “ANGLE, SUBTITLE, AUDIO,
NUMBER, AB, RETURN, REW/FF, SLOW” a hand icon will appear
on the display meaning that these options are not available.
8) Press “Stop” to browse the JPG file, “SLIDE SHOW” “MENU” will
display on the screen.
9) When browsing the picture, press “Stop” and thumbnail size picture
will be diplayed. You can select the picture you desire by using the
UP/DOWN/LEFT/RIGHT/ENTER key.
10) Press “Play” or “OK”, to preview the left top picture.
7. CONNECTING TO OTHER EQUIPMENT
1. AV Out
Connecting to a TV or another monitor
a. Slide the AV In/Out switch to Out.
b. Connect one end of the supplied audio/video adapter cable (1/8” )
plug into the unit’s DVD’s AV jack, and connect the other end to
the AV INPUT jacks on your TV or Monitor through an optional RCA
cable (white = left channel, red = right channel, Yellow = Video).
31
2. AV In
Connecting to a Game or Camcorder.
a. Slide the AV In/Out switch to In.
b. Connect one end of the supplied audio/video adapter cable (1/8”)
plug into the unit’s DVD’s AV jack, and connect the other end to
the AUDIO OUTPUT jacks on your Game or Camcorder through
an optional RCA cable (white = left channel, red = right channel,
Yellow = Video).
32
3) Optional Game Controller
Please refer to the operation manual provided with the Game
Controller.
*Note: Do not use the “AV Jack” and “E Port” at the same time when
in “AV IN” mode. Unplug the game controller when using the A/V input
jack.
4. Connecting Optional Headphones
Plug the optional headphones into either Headphone 1 jack or
Headphone 2 jack on the right side of the D1718ES.
Plugging into Headphone jack 1 will disable the internal speakers.
33
8. SPECIFICATIONS
Compatible DISC: DVD/CD/MP3
Signal system: NTSC
Panel size: 7 inch
DVD video format: Horizontal 720 pixel, vertical 480 pixel (NTSC)
Frequency response: 20 Hz to 20 kHz
Video output: 1 Vp-p/75 Ohm, unbalanced
Audio output: 1.4Vrms/10kOhm
Audio S/N: Better than 60 dB
Dynamic range : Better than 85 dB
Laser: Semiconductor Laser, Wave Length: 650 nm/795 nm
Power source: DC 9V
Power consumption: 12 W
Operating temperature: 5~35°C
Weight : 0.78 kg
Dimensions (W x D x H):7.87 X 5.92 X1.44inches
200 x 150.5 x 36.5mm
Battery Type: Ni-Mh
Single Monitor
Color System:
NTSC
Screen Size:
7 Inches
480 x 234
Resolution:
Power Supply:
DC 9V-12V
Power Consumption:
Operating Temperature:
Operating Humidity:
Storage Temperature:
Dimensions (W x D x H):
6W, 0.5 Amp
41~104º F (5~40ºC)
10-75%
4~140º F (-20~60ºC)
8.0” x 0.5” x 6.0”
(204 x 151 x 12 mm)
0.72 lbs (0.327kg)
Weight:
34
9. RECHARGEABLE BATTERY INSTALLATION AND USE
The player utilizes a set of long-life Ni-Mh batteries for a portable
power supply. Ni-MH batteries feature high storage capacity and low
level of degradation. This means the Ni-MH batteries do not have
“Memory Effect” and thus can be recharged safely regardless of
whether the battery is fully or only partially discharged. Please fully
charge the battery prior to first use.
NOTE: When the DVD player is used with the battery as a power
source, ensure that the battery has been charged for at least eight
hours prior to connecting it to the DVD player.
If you plan not to use the battery for an extended period of time (one
week or longer), we recommend that you first fully charge the battery
and store it away properly. For longer periods of storage, please re-
charge the battery at least once every two months to maintain the
battery in optimum condition. Do not short the battery terminals, store
the battery in a metal container, or leave the battery in a humid or
damp environment. Ideally, store the battery in an airtight container
with desiccant or other dehumidifying agent. Each full recharge takes
approximately five-hours and one full charge can provide power to
the player for approximately 3 hours.
During recharge, the red indicator will stay on. Once fully recharged,
the red light will turn off.At this point you may remove the wall plug and
stop charging.
Precautions related to Battery Recharge:
1. Once the battery is fully discharged, immediately recharge (regard-
less of whether you plan to use battery or not) in order to maximize
battery life.
2. To charge the battery, please connect the power jack directly into
the DVD player and leave the POWER switch in the off position.
Using and Maintaining your Rechargeable Batteries
1. Please make sure you always use only the AC adapter included
with the player to recharge your batteries.
2. Recharge efficiency will degrade when environmental temperatures
drop below 50oF (10oC) or exceed 95oF (35oC).
35
3. Please remove battery from the player and store it properly if the
player is not to be used for long time. During this period , please
recharge the battery at least once two months to avoid irreparable
damage to the battery. If the battery attached to the player for a long
period, please also recharge the battery at least once two weeks.
Installing the Battery Pack:
1. First, make sure the player is off and that the AC power supply has
been disconnected.
2. Close the player cover.
3. Align the battery pack pins with the holes on the rear of the unit.
4. Push the battery towards the rear of player until it locks into position.
The lock position is indicated by a click. The unit will fit snugly to the
player.
5. Push the battery plug into the DVD player DC input jack.
Removing the Battery Pack:
1. First, make sure the player is off and the battery plug has been discon-
nected.
2. Press the release button on the left of battery and pull the battery
from the back of the unit at the same time.
36
90 DAY LIMITED WARRANTY
Applies to Audiovox Video Products
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of
this product that should this product or any part thereof, under normal use and conditions,
be proven defective in material or workmanship within ninety (90) days from the date of original
purchase, such defect(s) will be repaired or replaced with reconditioned product (at the
Company's option) without charge for parts and repair labor. A game controller, if supplied,
is similarly warranted for ninety (90) days.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered
with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s),
transportation prepaid, to the Company at the address shown below.
This Warranty does not extend to the elimination of externally generated static or noise, to
correction of antenna problems, to costs incurred for installation, removal or reinstallation of
the product, or to damage to digital memory/media devices, gaming devices, discs, speakers,
accessories, or electrical systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the
Company, has suffered or been damaged through alteration, improper installation, mishan-
dling, misuse, neglect, accident, or by removal or defacement of the factory serial number/
barcodelabel(s). THE EXTENT OF THECOMPANY'S LIABILITY UNDERTHISWARRANTYIS
LIMITEDTOTHEREPAIRORREPLACEMENTPROVIDEDABOVEAND,INNOEVENT,SHALL
THECOMPANY'SLIABILITYEXCEEDTHEPURCHASEPRICEPAIDBYPURCHASERFORTHE
PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRAN-
TIES,INCLUDINGANYIMPLIEDWARRANTYOFMERCHANTABILITY,SHALLBELIMITEDTO
THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTYHEREUNDERINCLUDINGANYIMPLIEDWARRANTYOFMERCHANTABILITY
MUSTBEBROUGHTWITHINAPERIODOF24MONTHSFROMDATEOFORIGINALPURCHASE.
INNOCASESHALLTHECOMPANYBELIABLEFORANYCONSEQUENTIALORINCIDENTAL
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED,
WHATSOEVER. No person or representative is authorized to assume for the Company any
liability other than expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion
or limitation of incidental or consequential damage so the above limitations or exclusions may
not apply to you. This Warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
U.S.A. : AUDIOVOX ELECTRONICS CORPORATION, 150 MARCUS BLVD.
HAUPPAUGE, NEW YORK 11788 l 1-800-645-4994
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA
128-5556G
|