Asus Gigabit Ethernet Switch GXD1051 User Manual

QE4028  
GX-D1051  
GX-D1081  
10/100/1000Mbps Gigabit Ethernet Switch  
Quick Start Guide  
Copyright © 2008 ASUSTeK COMPUTER INC. All Rights Reserved.  
Technical specifications  
Data transmission rates  
Ports  
10/100/1000Mbps  
5 RJ-45 10/100/1000Mbps Gigabit Ethernet ports for  
GX-D1051  
8 RJ-45 10/100/1000Mbps Gigabit Ethernet ports for  
GX-D1081  
Protocol  
IEEE 802.3 10Base-T  
IEEE 802.3u 100Base-TX  
IEEE 802.3ab 1000Base-T  
IEEE 802.3x Full duplex flow control  
Jumbo frame support: 12KB for GX-D1051, 16KB  
for GX-D1081  
Performance  
Bandwidth: 10Gbps for GX-D1051, 16Gbps for  
GX-D1081  
Forward rate: 14,800 packets/sec. (10Mbps),  
148,000 packets/sec. (100Mbps),  
1,488,000 packets/sec. (1000Mbps)  
Packet buffer memory: 832K bits for GX-D1051,  
1M bits for GX-D1081  
MAC address table: 1K for GX-D1051,  
4K for GX-D1081  
Switching mode  
Store-and-forward  
Environmental  
Operating temperature: 0ºC-40ºC  
specifications  
Operating humidity: 5%-95% (non-condensing)  
Storage temperature: 0ºC-70ºC  
LED indicators  
Power adapter  
Dimensions  
POWER, Link/Act  
12W, DC external: 12V 1A  
158mm (L) x 98mm (W) x 30mm (H)  
Desktop placement, wall mounting  
CE, FCC, LVD, C-Tick, VCCI  
Placement options  
Safety & EMI  
Quick Start Guide  
3
Hardware  
Front panel  
The front panel of GX-D1051 / GX-D1081 includes LED indicators that show  
realtime status of the switch.  
GX-D1051 front panel  
GX-D1081 front panel  
LED indicators  
LED  
Color  
Status  
ON  
Description  
The switch is ON.  
Green  
POWER  
OFF  
The switch is OFF.  
The corresponding port is connected and a  
valid link is established at 1000Mbps.  
ON  
Green  
Amber  
A valid link is established and data is being  
transmitted or received at 1000Mbps.  
Blinking  
OFF  
No valid link is established.  
Link/Act  
The corresponding port is connected and a  
valid link is established at 10/100Mbps.  
ON  
A valid link is established and data is being  
transmitted or received at 10/100Mbps.  
Blinking  
OFF  
No valid link is established.  
4
Quick Start Guide  
Rear panel  
The rear panel of GX-D1051 / GX-D1081 includes Gigabit Ethernet ports and the  
DC IN input port.  
DC12V  
5
4
3
2
VIP  
GX-D1051 rear panel  
DC12V  
8
7
6
5
4
3
2
VIP  
GX-D1081 rear panel  
Quick Start Guide  
5
Placement options  
DO NOT place any device on top of the switch.  
Leave enough space around the switch for adequate ventilation. Ensure  
that the switch is placed in a location that meets the environmental  
specifications. See page 3 for details.  
Desktop placement  
Put the switch on a flat and stable surface.  
Wall mounting  
Mount the switch on a wall with the supplied mounting screws.  
To mount the switch on a wall:  
1.  
2.  
Secure the two supplied screws into the wall.  
Latch the hooks of the switch onto the screws.  
Bottom Side  
117.0mm  
1
5.3mm  
2.95mm  
Latch the switch  
onto the screws.  
Secure two screws on the wall  
2
18.75mm  
2mm  
Wall mounting  
6
Quick Start Guide  
Connecting to network devices  
Use either cross-over or straight-through cables to connect other  
network devices such as PCs, bridges, switches, hubs, and repeaters.  
The length of the network cables should not exceed 100 meters (328 feet).  
Connecting to end nodes  
The GX-D1051 / GX-D1081 Switch is used as a standalone switch to connect end  
nodes such as PCs and printers and form a small workgroup. With auto MDI/MDIX  
capability, each Ethernet port on this switch automatically detects the type of cable  
plugged to it and adjusts itself to the speed and duplex of the device to which it is  
connected.  
The Link/Act LED lights green / amber or blinks green / amber when a valid link is  
established on the corresponding port.  
Connecting to switches or hubs  
The Gigabit Ethernet ports on this switch act as uplink ports to connect other  
switches or hubs and form a bigger switched network.  
The Link/Act LED lights green / amber or blinks green / amber when a valid link is  
established on the corresponding port.  
Powering on  
To power on the GX-D1051 / GX-D1081 Switch:  
1.  
2.  
Connect the AC power cord to the AC adapter.  
Connect the DC output plug on the AC adapter to the DC IN input port on the  
rear panel of the switch.  
3.  
Plug the AC power cord into a power outlet.  
Quick Start Guide  
7
8
Quick Start Guide  

Hotpoint HW170LIW User Manual
Frigidaire FGGC3645KB User Manual
Fisher VM 6619 User Manual
EVGA nForce e 610i User Manual
Electrolux ES200 User Manual
Dixon RM 35 User Manual
Dell Computer Monitor 1908WFP User Manual
Cypress CY7C1464AV33 User Manual
AT T DECT EL51109 User Manual
Asus A7V8X X User Manual