Asus Asus 29 Frameless Ultra Wide Monitor PB298Q User Manual

PB298Q  
LCD Monitor  
User Guide  
Notices  
Federal Communications Commission Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions:  
This device may not cause harmful interference, and  
This device must accept any interference received including  
interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance  
with manufacturer’s instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment to an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
As an Energy Star® Partner, our company has determined  
that this product meets the Energy Star® guidelines for energy  
efficiency.  
Canadian Department of Communications Statement  
This digital apparatus does not exceed the Class B limits for radio  
noise emissions from digital apparatus set out in the Radio Interference  
Regulations of the Canadian Department of Communications.  
This class B digital apparatus complies with Canadian ICES-003.  
iii  
Safety information  
Before setting up the monitor, carefully read all the documentation that  
came with the package.  
To prevent fire or shock hazard, never expose the monitor to rain or  
moisture.  
Never try to open the monitor cabinet. The dangerous high voltages  
inside the monitor may result in serious physical injury.  
If the power supply is broken, do not try to fix it by yourself. Contact a  
qualified service technician or your retailer.  
Before using the product, make sure all cables are correctly connected  
and the power cables are not damaged. If you detect any damage,  
contact your dealer immediately.  
Slots and openings on the back or top of the cabinet are provided for  
ventilation. Do not block these slots. Never place this product near or  
over a radiator or heat source unless proper ventilation is provided.  
The monitor should be operated only from the type of power source  
indicated on the label. If you are not sure of the type of power supply to  
your home, consult your dealer or local power company.  
Use the appropriate power plug which complies with your local power  
standard.  
Do not overload power strips and extension cords. Overloading can  
result in fire or electric shock.  
Avoid dust, humidity, and temperature extremes. Do not place the  
monitor in any area where it may become wet. Place the monitor on a  
stable surface.  
Unplug the unit during a lightning storm or if it will not be used for a  
long period of time. This will protect the monitor from damage due to  
power surges.  
Never push objects or spill liquid of any kind into the slots on the  
monitor cabinet.  
To ensure satisfactory operation, use the monitor only with UL listed  
computers which have appropriate configured receptacles marked  
between 100 ~ 240V AC.  
The socket-outlet shall be installed near the equipment and shall be  
easily accessible  
If you encounter technical problems with the monitor, contact a  
qualified service technician or your retailer.  
iv  
Care & Cleaning  
Before you lift or reposition your monitor, it is better to disconnect the  
cables and power cord. Follow the correct lifting techniques when  
positioning the monitor. When lifting or carrying the monitor, grasp the  
edges of the monitor. Do not lift the display by the stand or the cord.  
Cleaning. Turn your monitor off and unplug the power cord. Clean the  
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains  
may be removed with a cloth dampened with mild cleaner.  
Avoid using a cleaner containing alcohol or acetone. Use a cleaner  
intended for use with the LCD. Never spray cleaner directly on the  
screen, as it may drip inside the monitor and cause an electric shock.  
The following symptoms are normal with the monitor:  
The screen may flicker during the initial use due to the nature of the  
fluorescent light. Turn off the Power Switch and turn it on again to  
make sure that the flicker disappears.  
You may find slightly uneven brightness on the screen depending on  
the desktop pattern you use.  
When the same image is displayed for hours, an afterimage of the  
previous screen may remain after switching the image. The screen will  
recover slowly or you can turn off the Power Switch for hours.  
When the screen becomes black or flashes, or cannot work anymore,  
contact your dealer or service center to fix it. Do not repair the screen  
by yourself!  
Conventions used in this guide  
WARNING: Information to prevent injury to yourself when trying to  
complete a task.  
CAUTION: Information to prevent damage to the components  
when trying to complete a task.  
IMPORTANT: Information that you MUST follow to complete a  
task.  
NOTE: Tips and additional information to aid in completing a task.  
v
Where to find more information  
Refer to the following sources for additional information and for product  
and software updates.  
1. ASUS websites  
The ASUS websites worldwide provide updated information on ASUS  
hardware and software products. Refer to http://www.asus.com  
2. Optional documentation  
Your product package may include optional documentation that may  
have been added by your dealer. These documents are not part of  
the standard package.  
vi  
1.1  
Welcome!  
Thank you for purchasing the ASUS® LCD monitor!  
The latest widescreen LCD monitor from ASUS provides a crisper,  
broader, and brighter display, plus a host of features that enhance your  
viewing experience.  
With these features, you can enjoy the convenience and delightful visual  
experience that the monitor brings you!  
1.2  
Package contents  
Check your package for the following items:  
LCD Monitor  
Monitor Base and Stand  
Quick Start Guide  
Warranty Card  
1x Power Cord  
1x DVI Cable (Dual Link)  
1x HDMI Cable  
1x DisplayPort Cable  
1x Audio Cable  
1x Cable Clip  
4x Screws  
If any of the above items is damaged or missing, contact your retailer  
immediately.  
ASUS LCD Monitor PB298Q  
1-1  
1.3  
Monitor introduction  
1.3.1  
Front view  
1
2
4
5
6
7
3
1.  
QuickFit Button:  
This is a hotkey to activate the QuickFit function designed for alignment.  
The QuickFit function contains 7 pages of common grid patterns, paper  
sizes, and photo sizes. See page 1-5 for details.  
2.  
Button:  
Use this hotkey to switch from six video preset modes ({Scenery Mode},  
{Standard Mode}, {Theater Mode}, {Game Mode}, {Night View Mode},  
and {sRGB}) with SPLENDID™ Video Intelligence Technology.  
Exit the OSD menu or go back to the previous menu as the OSD menu is  
active.  
3.  
Button:  
Press this button to decrease the value of the function selected or move  
to the next function.  
This is also a hotkey for Volume adjustment.  
4.  
Button:  
Press this button to enter the OSD menu.  
Press this button to enter/select the icon (function) highlighted while the  
OSD is activated.  
1-2  
Chapter 1: Product Introduction  
5.  
Button:  
Press this button to increase the value of the function selected or move to  
the previous functions.  
This is also a hotkey for Brightness adjustment.  
6.  
7.  
Input Select Button:  
Use this hotkey to switch from input signal.  
Power Button/Power Indicator:  
Press this button to turn the monitor on/off.  
The color definition of the power indicator is as the below table.  
Status  
White  
Amber  
OFF  
Description  
ON  
Standby mode  
OFF  
ASUS LCD Monitor PB298Q  
1-3  
1.3.2  
Back view  
7
3
4
5
6
1
2
1. AC-in Port  
2. DisplayPort  
3. DVI Port  
4. HDMI Port  
5. Audio-in Port  
6. Earphone-out Port  
7. Kensington Lock Slot  
1-4  
Chapter 1: Product Introduction  
 
1.3.3  
QuickFit function  
The QuickFit function contains three patterns: (1) Grid (2) Paper size (3)  
Photo size.  
1. Grid pattern: Facilitates designers and users to organize content and  
layout on one page and achieve a consistent look and feel.  
Alignment Grid  
EXIT  
QuickFit  
2. Paper size: Provides users to view their documents in real size on the  
screen.  
Letter  
EXIT  
QuickFit  
3. Photo size: Provides photographers and other users to accurately  
view and edit their photos in real size on the screen.  
2x2  
8x10  
4x6  
3x5  
5x7  
EXIT  
QuickFit  
EXIT  
QuickFit  
ASUS LCD Monitor PB298Q  
1-5  
 
2.1  
Assembling the base and stand  
To assemble the base and stand:  
1. Carefully put the front of the monitor face down on a clean table.  
2. Attach the stand to the monitor, use a screwdriver (not included) and  
4 screws taken out of the package to lock the stand to the monitor  
tightly.  
3. Attach the base to the stand.  
4. Use your fingers to lock the base to the stand tightly.  
2
3
1
4
We recommend that you cover the table surface with soft cloth to prevent  
damage to the monitor.  
5. Insert the cable-clip to the slots on the stand. Adjust the monitor to  
the angle that is most comfortable for you.  
5
2-1  
Chapter 2: Setup  
2.2  
Connecting cables  
Connect the cables you need based on the introductions on chapter 1.3.2,  
page 1-4.  
2.3  
Detaching the base and stand  
To detach the base and stand:  
1. Disconnect power and signal cables. Carefully put the front of the  
monitor face down on a clean table.  
2. Use your fingers to loosen the screw that lock the the base.  
3. Detach the base from the stand.  
4. Loosen 4 screws that locked the stand.  
We recommend that you cover the table surface with soft cloth to prevent  
damage to the monitor.  
Hold the base while removing the screw.  
4
3
1
2
ASUS LCD Monitor PB298Q  
2-2  
2.4  
Adjusting the monitor  
For optimal viewing, we recommend that you look at the full face of the  
monitor, then adjust the monitor to the angle that is most comfortable  
for you.  
Hold the base to prevent the monitor from falling when you change its  
angle.  
You can tilt the monitor from -5˚ to +20˚, swivel from -60˚ to +60˚, and  
lift the monitor’s height for about 150mm.  
-5° ~ +20°  
60°  
60°  
150mm  
It is normal that the monitor slightly shakes while you adjust the viewing angle.  
It is not recommended to have the monitor tilted under the pivot mode.  
2-3  
Chapter 2: Setup  
3.1  
OSD (On-Screen Display) menu  
3.1.1  
How to reconfigure  
PB298  
Splendid  
Color  
Scenery Mode  
Standard Mode  
Theater Mode  
Game Mode  
Image  
Sound  
Input Select  
Night View Mode  
sRGB  
System Setup  
Move  
Menu  
Exit  
1. Press the  
button to activate the OSD menu.  
2. Press and to navigate through the functions. Highlight and  
activate the desired function by pressing the button. If the  
function selected has a sub-menu, press and again to navigate  
through the sub-menu functions. Highlight and activate the desired  
sub-menu function by pressing the  
button.  
3. Press and to change the settings of the selected function.  
4. To exit the OSD menu, press the  
to adjust any other function.  
button. Repeat step 2 and step 3  
3.1.2  
OSD function introduction  
1. Splendid  
This function contains six sub-functions that you can select for your  
preference. Each mode has the Reset selection, allowing you to  
maintain your setting or return to the preset mode.  
PB298  
Splendid  
Color  
Scenery Mode  
Standard Mode  
Theater Mode  
Game Mode  
Image  
Sound  
Input Select  
Night View Mode  
sRGB  
System Setup  
Move  
Menu  
Exit  
ASUS LCD Monitor PB298Q  
3-1  
Scenery Mode: This is the best choice for scenery photo displaying with  
SPLENDID™ Video Intelligence Technology.  
Standard Mode: This is the best choice for document editing with  
SPLENDID™ Video Intelligence Technology.  
Theater Mode: This is the best choice for movie watching with  
SPLENDID™ Video Intelligence Technology.  
Game Mode: This is the best choice for game playing with SPLENDID™  
Video Intelligence Technology.  
Night View Mode: This is the best choice for playing dark-scene game  
or watching dark-scene movie with SPLENDID™ Video Intelligence  
Technology.  
sRGB Mode: This is the best choice for viewing photos and graphics  
from PCs.  
In the Standard Mode, the {Saturation}, {Skin Tone}, {Sharpness}, and  
{ASCR} functions are not user-configurable.  
In the sRGB Mode, the {Saturation}, {Color Temp.}, {Skin Tone},  
{Sharpness}, {Brightness}, {Contrast}, and {ASCR} functions are not user-  
configurable.  
2. Color  
Select the image color you like from this function.  
PB298  
Splendid  
Color  
Brightness  
Contrast  
Saturation  
Hue  
90  
80  
Image  
Sound  
50  
50  
Input Select  
Color Temp.  
Skin Tone  
Gamma  
User Mode  
Natural  
2.2  
System Setup  
Color Reset  
Move  
Menu  
Exit  
Brightness: The adjusting range is from {0} to {100}. The  
button  
is also a hotkey to activate this function.  
Contrast: The adjusting range is from {0} to {100}.  
Saturation: The adjusting range is from {0} to {100}.  
Hue: Shift the image color between green and purple.  
Color Temp.: Contain three preset color modes ({Cool}, {Normal},  
{Warm}) and one {User Mode}.  
3-2  
Chapter 3: General Instruction  
Skin Tone: Contain three color modes including {Reddish}, {Natural},  
and {Yellowish}.  
Gamma: Set the color mode to {2.2} or {1.8}.  
Color Reset:  
Current mode color reset:  
Reset the color settings of current color mode to the factory default  
value.  
All modes color reset:  
Reset the color settings of all color modes to the factory default  
value.  
In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-  
configurable; the adjusting range is from {0} ~ {100}.  
3. Image  
Set the image related setting from this menu.  
PB298  
Splendid  
Color  
Sharpness  
Trace Free  
Aspect Control  
ASCR  
50  
60  
Image  
Sound  
Full  
OFF  
Input Select  
System Setup  
Move  
Menu  
Exit  
Sharpness: Adjust the picture sharpness. The adjusting range is from {0}  
to {100}.  
Trace Free: Speed up the response time by Over Drive technology. The  
adjusting range is from lower {0} to faster {100}.  
Aspect Control: Adjust the aspect ratio to {Full}, {4:3}, {OverScan},  
{1:1}. The {OverScan} is available only for HDMI source.  
ASCR: Turn on or off the dynamic contrast ratio function.  
ASUS LCD Monitor PB298Q  
3-3  
4. Sound  
Adjust the sound settings to your preference.  
PB298  
Splendid  
Color  
Volume  
Mute  
50  
OFF  
Image  
Sound  
Source  
DisplayPort  
Input Select  
System Setup  
Move  
Menu  
Exit  
5. Input Select  
Select the input source from DVI, HDMI, or DisplayPort.  
PB298  
Splendid  
Color  
DVI  
HDMI  
Image  
Sound  
DisplayPort  
Input Select  
System Setup  
Move  
Menu  
Exit  
6. System Setup  
Adjust the system configuration.  
PB298  
Splendid  
Color  
Splendid Demo Mode  
ECO Mode  
OFF  
OFF  
Image  
Sound  
OSD Setup  
Key Lock  
Input Select  
Information  
Language  
English  
ON  
System Setup  
Power Indicator  
All Reset  
Move  
Menu  
Exit  
3-4  
Chapter 3: General Instruction  
Splendid Demo Mode: Activate the demo mode for the Splendid  
function.  
ECO Mode: Activate the ecology mode for power saving.  
OSD Setup: Adjust the horizontal postition ({H-Position}), vertical  
position ({V-Position}), {OSD Timeout}, {DDC/CI}, and {Transparency}  
of the OSD screen.  
Key Lock: Select {On} to lock all the button functions (including the  
Power Button).  
Press and hold the  
Key Lock function.  
key for 5 seconds to enable or disable this  
Information: Show the monitor information.  
Language: Select OSD language.  
Information: Display the monitor information.  
Power Indicator: Turn the power LED indicator on/off.  
All Reset: Select {Yes} to revert all settings to the factory default mode.  
ASUS LCD Monitor PB298Q  
3-5  
3.2  
Model  
Specifications  
PB298Q  
29” W (73.025 cm)  
2560 x 1080  
Panel Size  
Max. Resolution  
Brightness (Typ.)  
Intrisinc Contrast Ratio (Typ.)  
Dynamic Contrast Ratio (Typ.)  
Viewing Angle (CR=10)  
Color Saturation (NTSC)  
Display Colors  
300 cd/m2  
1000:1  
80,000,000:1  
178°(H) / 178°(V)  
72% sRGB  
16.7 Millions  
Response Time (Typ.)  
DisplayPort input  
HDMI input  
5 ms (Gray to Gray)  
Yes  
Yes  
DVI input  
YES (Dual Link)  
Yes (3 W x 2)  
Yes (3.5 mm Mini-jack)  
Speaker  
Earphone  
Power On: < 55 W  
Energy Star: < 31 W  
Standby: < 0.5 W  
Power Off: < 0.5 W  
Power Consumption  
Power Saving Mode  
Power Off Mode  
Tilt  
< 0.5 W  
< 0.5 W  
-5° ~ +20°  
Swivel  
-60° ~ +60°  
Height Adjustment  
Phys. Dimension (WxHxD)  
Box Dimension (WxHxD)  
Net Weight (Esti.)  
Gross Weight (Esti.)  
Voltage Rating  
150 mm  
700 x 376(lowest) x 218 mm  
804 x 437 x 253 mm  
8.5 kg  
11.7 kg  
AC 100 ~ 240 V  
Energy Star 6.0, UL/cUL, CB, CE, EuP, FCC,  
CCC(5,000m), BSMI, Gost-R, C-Tick, VCCI, RoHS,  
WEEE, Windows 7 and 8 WHQL, TCO 6.0,  
EPEAT Gold, PSE, HDMI1.4, DP1.2  
Regulation approvals  
*Specifications are subject to change without notice.  
3-6  
Chapter 3: General Instruction  
3.3  
Troubleshooting (FAQ)  
Problem  
Possible Solution  
button to check if the monitor is in the  
Power LED is not ON  
Press the  
ON mode.  
Check if the power cord is properly connected to  
the monitor and the power outlet.  
The power LED lights amber and  
there is no screen image  
Check if the monitor and the computer are in the  
ON mode.  
Make sure the signal cable is properly connected  
the monitor and the computer.  
Inspect the signal cable and make sure none of the  
pins are bent.  
Connect the computer with another available  
monitor to check if the computer is properly  
working.  
Screen image is too light or dark  
Adjust the Contrast and Brightness settings via  
OSD.  
Screen image bounces or a wave  
pattern is present in the image  
Make sure the signal cable is properly connected to  
the monitor and the computer.  
Move electrical devices that may cause electrical  
interference.  
Screen image has color defects  
(white does not look white)  
Inspect the signal cable and make sure that none of  
the pins are bent.  
Perform Reset via OSD.  
Adjust the R/G/B color settings or select the Color  
Temperature via OSD.  
No sound or sond is low  
Make sure the audio cable is properly connected to  
the monitor.  
Adjust the volume settings of both your monitor and  
computer.  
Make sure the computer sound card driver is  
properly installed and activated.  
ASUS LCD Monitor PB298Q  
3-7  
3.4  
Supported Timing List  
VESA / IBM Modes Support Timing (DVI, HDMI, and DisplayPort inputs)  
Resolution  
Refresh Rate  
Horizontal Frequency  
640 x 350  
640 x 480  
640 x 480  
640 x 480  
720 x 400  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
70 Hz  
60 Hz  
67 Hz  
75 Hz  
70 Hz  
56 Hz  
60 Hz  
72 Hz  
75 Hz  
75 Hz  
60 Hz  
60 Hz  
70 Hz  
75 Hz  
75 Hz  
60 Hz  
60 Hz  
60 Hz  
60 Hz  
75 Hz  
60 Hz  
60 Hz  
75 Hz  
60 Hz  
60 Hz  
60 Hz  
60 Hz  
60 Hz  
31.469 KHz  
31.469 KHz  
35 KHz  
37.5 KHz  
31.469 KHz  
35.156 KHz  
37.879 KHz  
48.077 KHz  
46.875 KHz  
49.725 KHz  
31.02 KHz  
48.363 KHz  
56.476 KHz  
60.023 KHz  
67.5 KHz  
832 x 624  
848 x 480  
1024 x 768  
1024 x 768  
1024 x 768  
1152 x 864  
1280 x 720  
1280 x 800  
1280 x 960  
1280 x 1024  
1280 x 1024  
1366 x 768  
1440 x 900  
1440 x 900  
1680 x 1050  
1680 x 1050  
1920 x 1080  
1920 x 1080  
2560 x 1080  
44.772 KHz  
49.702 KHz  
60 KHz  
63.981 KHz  
79.976 KHz  
47.712 KHz  
55.935 KHz  
49.725 KHz  
65.29 KHz  
64.674 KHz  
67.5 KHz  
66.587 KHz  
66.636 KHz  
CEA-861 Formats Supported Timing (HDMI and DisplayPort input)  
Resolution  
Refresh Rate  
Horizontal Frequency  
640 x 480P  
720 x 480P  
720 x 576P  
59.94 / 60 Hz  
59.94 / 60 Hz  
50 Hz  
31.469 / 31.5 KHz  
31.469 / 31.5 KHz  
31.25 KHz  
1280 x 720P  
1280 x 720P  
1440 x 480P  
1440 x 576P  
1920 x 1080i  
1920 x 1080i  
1920 x 1080P  
1920 x 1080P  
50 Hz  
37.5 KHz  
59.94 / 60 Hz  
59.94 / 60 Hz  
50 Hz  
50 Hz  
59.94 / 60 Hz  
50 Hz  
44.955 / 45 KHz  
31.469 / 31.5 KHz  
31.25 KHz  
28.125 KHz  
33.716 / 33.75 KHz  
56.25 KHz  
59.94 / 60 Hz  
67.433 / 67.5 KHz  
* The modes not listed in the above tables may not be supported. For optimal resolution, we  
recommend that you choose a mode listed in the above tables.  
3-8  
Chapter 3: General Instruction  

Cypress CY7C1917CV18 User Manual
Cypress CY7C1515JV18 User Manual
Cres Cor CO151XWUA5B User Manual
CDA RC 9620 User Manual
Audiovox LCM5043NP User Manual
AT T E5960C User Manual
Asus Maximus Motherboard MAXIMUSVIGENE User Manual
Asus Desktop Motherboard P8Z77 V LE PLUS User Manual
Apex Digital PF2730 User Manual
AMD GEODE LE 366 User Manual