Apple Product Environmental Specification
Product: Apple Cinema Display, 30" Flat Panel
Model Number: M9179 (Agency Number A1083)
Date: 10/14/04
This list of environmental attributes can be used as a guide to determine product compliance with various regional, country, and industry
sector product environmental criteria. The environmental criteria listed is based on programs such as ECMA, IT ECO (formerly SITO),
Blue Angel, ENERGY STAR®, and TCO.
Each criteria listed includes a reference to the section of the Eco-label specification where it is described.
Note: Not all environmental criteria apply to all products.
This environmental specification is provided for informational purposes only. Nothing contained within shall be construed as a warranty,
expressed or implied, with respect to the product.
Page
2
Table of Contents:
1.0
2.0
Environmental policy & environmental management
An environmental policy and environmental management system (EMS) demonstrates the commitment, purpose,
objective and mission of a company. Apple has established an internal EMS, and has certified its facilities in
Sacramento, CA, Ireland, and Singapore to ISO 14001.
Environmentally conscious design
2
Environmentally conscious design is the systematic approach of identifying and incorporating product features
and functions with respect to environmental, health and safety objectives throughout all stages of a product’s life.
Apple has established a process where we address these issues in the design, development, manufacture, use,
and end-of-life of our products.
3.0
4.0
5.0
Banned/restricted materials
3
4
4
Some materials that have traditionally been used in electronic products have been determined to be
environmental or health hazards. The use of these materials has been banned or restricted by legislation or
ecolabels.
Batteries
Apple uses rechargeable batteries to provide power for notebooks, develops power management software and
energy saving features to obtain maximum efficiency, and avoids batteries that contain lead, cadmium and/or
mercury.
Energy consumption
The use of energy-efficient products results in savings in energy costs and the reduction of pollution resulting
from the generation of electricity. Apple promotes energy conservation in its product design and performance
including our participation in the ENERGY STAR® program and no-load power consumption programs such as
the EU Code of Conduct for external power supplies, and the U.S. Federal Energy Management Program. The
energy data listed reflects standard configurations only. Other configurations may yield different energy values.
6.0
7.0
Emissions
4
5
Apple products are tested and certified to international standards to assure the safe use of our products.
Electrical Safety, EMC, and connection to telephone network
The safe use of Apple products is of foremost concern. Therefore, Apple tests and certifies our products to
international standards to assure their safe use.
8.0
9.0
Ergonomics
5
5
5
Visual ergonomics is an important concern to computer users. It affects user comfort and performance. Apple
designs, tests and certifies our displays to meet stringent visual ergonomics (front of screen) criteria. In addition,
our displays have the capability of tilting and swiveling to adjust to user needs.
Packaging and documentation
Apple evaluates the environmental attributes of our packaging for hazardous materials as well as the
minimization of the quantity and weight of the packaging materials. These considerations enable and promote
recycling of packaging materials for our customers.
10.0
Recycling
Apple designs its products with specific features and functions that promote the ease of recyclables. In addition,
in specific countries, Apple has established takeback/recycling programs to assist customers.
11.0
12.0
Additional Attributes
5
6
Additional Information/Notes
1
Requirement
met
IT
Blue
TCO '03
ECMA
ECO Angel
APES
(Apple's Product Environmental Specifications)
Not
Yes No
rel.
Desktop Desktop
('02)
(6/99)
5.2
CPUs
Display
Information on the ability to change/upgrade components is
2.24
X
4.5
included in the product documentation
Design allows for installation, expansion exchange, upgrade, or
attachment of a mass storage unit
2.25
P6.10 4.4, C.3
P1.1
5.2
3.0
Banned/restricted materials
3.1 CFCs and HCFCs are not present in the product
X
X
No substances included in annex A, B or C of the Montreal Protocol
on Substances that Deplete the Ozone Layer are used in the
manufacture of the printed wiring boards, assembly of the Printed
3.2
5.8
Wiring Boards and final assembly of the product
3.3 Asbestos, PCB and PCT are not present in the product.
X
X
5.8
5.8
Mercury is not present in the product (with the exception of mercury
3.4
P1.2
in flat panel backlighting)
Connections to be separated during disassembly of FPD must be
easy to take apart in order to not damage the mercury lamps. This
means that gluing and welding must not be used to bond parts and
make removal of the lamps complicated.
3.5
X
A.6.3.2
A.6.3.2
Mercury (Hg) in flat panel display backlight bulb(s):
__1.8_ mg (minimum)
3.6 __3.0_ mg (average)
« Values
P6.17
P6.12
__3.5_ mg (maximum)
__16_ number of backlight bulbs
Brominated and chlorinated flame retardants, PBB and PBDEs are
3.7 not present in mechanical plastic parts heavier than
X 25 g / ___ 50 g
X
X
X
5.8
5.8
No PCB (polychlorinated biphenyls) or PCT (polychlorinated
terphenyls) are present in product
3.8
The base material of Printed Wiring Board must not contain any
3.9 PBB (polybrominated biphenyls), PBDE (polybrominated diphenyl
ethers) or chlorinated paraffins
3.1.2.2
Plastic components weighing more than 25 grams shall not contain
3.10 flame retardants that contain organically bound chlorine or bromine.
The flame retardant threshold value is 0.5 weight percent.
X
A.6.2.3
A list of all plastic components in the product that weigh >25 grams
shall be given. The list shall include information regarding use of
flame retardants. CAS# and FR type must be provided for flame
retardant concentrations over 0.5 weight percent. Part of the
information can, for secrecy reasons, be sent directly from the
plastic manufacturer to TCO certified lab.
3.11
X
X
A.6.2.4
A.6.2.5
Plastic parts that weight more than 25 grams in the VDU shall not
3.12 contain chlorine or bromine as a part of the polymer; i.e. polyvinyl
chloride (PVC)
No antimony trioxide (Sb2O3) flame retardants are used in plastic
enclosure resins
3.13
X
X
X
No cadmium (Cd) or cadmium compounds & lead (Pb) or lead
3.14
5.8
5.8
compounds are intentionally added to cable enclosures
Cadmium (Cd) and lead (Pb) are not present in mechanical plastic
3.15
parts heavier than
X 25 g / __50g
3.16 Cadmium is not present in the CRT (Cathode Ray Tube)
3.17 No mercury (Hg) or cadmium (Cd) in electronic components
Paint, lacquer, plastic parts, connectors, batteries, and solder in the
X
5.8
5.8
X
A.6.2.1
A.6.2.1
VDU shall not contain cadmium (Cd) or mercury (Hg). The
3.18
X
threshold value per listed part is 2 ppm for mercury and 5 ppm for
cadmium.
Batteries, paint, lacquer, external cables, plastic materials and
3.19 external adaptors belonging to the VDU shall not contain lead (Pb).
The threshold value is 50 ppm per weight per listed part
X
X
A.6.2.2
Paints and inks used in the product are free from cadmium (Cd)
3.20
P1.4
5.8
5.8
and lead (Pb)
Chloroparaffins with chain length 10-13 C atoms, chlorinated
3.21 greater than 50% are not present in mechanical plastic parts
X
heavier than
X 25g / __50g
3
Requirement
met
IT
Blue
TCO '03
ECMA
(6/99)
ECO Angel
APES
(Apple's Product Environmental Specifications)
Not
Yes No
rel.
Desktop Desktop
CPUs
('02)
Display
4
Batteries
Batteries, defined as hazardous in the EU Directive 91/157/EEC
and amendments 98/101/EC, are not used in the product
4.1
X
3.1.4
5.10
4.2 Battery handling information is given in the product documentation
4.3 Batteries may not contain mercury (Hg) or cadmium (Cd)
X
X
3.1.4
3.1.4
5.10
5.8
P2.2
A.6.2.1
The battery chemical composition:
4.4 Logic board/memory/clock battery _____
N/A
X
5.10
Power battery
_____
5
Energy consumption
5.1 Power supply maximum continuous power rating
at 115V/60Hz, and 175 CD/m2
150 W
« Values
« Values
A.7.1
Standby:
84.4 W
Sleep mode:
0.8 W
Off:
0.7 W
at 230V/50Hz, and 175 Cd/m2
« Values
N/A
Standby:
79.3 W
Sleep mode:
Sleep mode:
0.9 W
W
Off:
0.7 W
at 100V/50Hz & 60HZ
X
P8.1 4.1.1.6
5.3
5.3
External power supply (AC adaptor) no-load power consumption
5.2 at 115v/60Hz
at 230v/50Hz
_0.4_ watts
_0.5_ watts
« Values
5.3 Product meets the requirements of ENERGY STAR®
X
X
P8.4 4.1.1.1
External power supply/AC Adaptor meets EU CoC (Code of
5.4
Conduct) criteria
Product meets US FEMP (Federal Energy Management Program)
criteria
5.5
X
X
Information about the energy save function is given in the user
manual
5.6
P8.3
5.3
There shall be a description, from the user's point of view, how the
5.7 VDU is brought into energy mode(s) and how this is indicated on
the VDU.
X
A.7.1
5.8 The sleep mode is activated automatically
X
X
P8.1 4.1.1.2
4.1.1.4
The appliance may be separated from the mains for at least 4
5.9
weeks without damage to the appliance
The computer must be so equipped as to support an operating
system allowing the implementation of power-saving functions. Unit
5.10 must offer at least one power-saving rest mode as a special
operating mode. This mode must activate itself automatically after a
factory pre-set activation time
X
X
4.1.1.2
First step sleep must be ≤15W, readable screen within 3 sec (5 sec
5.11 for AIO). If Sleep ≤5W in second step or in first step then no
wakeup time requirement applies.
A.7.1
6
Emissions
Alternating Electric Field: Band I: 5 Hz - 2 kHz, ≤ 10 V/m, measured
6.1 30 cm & 50 cm in front of VDU; Band II: 2 - 400 kHz, ≤ 1 V/m,
X
X
A.4.2
A.4.3
measured 50 cm around VDU and 30 cm in front of VDU
Alternating Magnetic Fields: Band I: 5 Hz - 2 kHz, ≤ 200 nT,
6.2 measured 30 cm in front of VDU and at 50 cm around VDU; Band
II: 2 - 400 kHz, ≤ 25 nT measured 50 cm around VDU
4
Requirement
met
IT
Blue
TCO '03
ECMA
(6/99)
ECO Angel
APES
(Apple's Product Environmental Specifications)
Not
Yes No
rel.
Desktop Desktop
CPUs
('02)
Display
7
Electrical safety, EMC and connection to the telephone network
The product is CE-marked. A CE certificate of conformity is
available
7.1
X
P3.4
P3.2
P3.3
P3.1
5.4
The product meets applicable EMC Directive (electromagnetic
compatibility)
7.2
7.3
7.4
X
The product is to be connected to the PTT network and meets the
EU telecommunications Directive
X
Product meets the Low Voltage Directive (LVD) regarding electrical
safety (73/23/EEC &93/68/EEC
X
The VDU shall be certified according to EN 60950 / IEC 60950 for
7.5 electrical safety of information technology equipment including
business equipment
X
A.5.1
8
Ergonomics
The LCD meets the ergonomic requirements of ISO 13406-2 for flat
panel displays
8.1
X
X
12.1
8.2 The LCD panel meets the ergonomic requirements of TCO'03
A.2,A.3
9
Packaging and documentation
9.1 The product package material does not contain heavy metals
9.2 The product package material does not contain CFC/HCFC.
9.3 Product packaging:
X
X
P5.1
P13.1
P13.2
5.8
5.11
Material type: corrugated cardboard
Material type: EPS foam
Weight:
Weight:
2.9 kg
1.8 kg
« Value
« Value
« Value
Material type: Urethane foam
Weight: 0.02 kg
Material type: HDPE/LDPE laminated bag Weight: 0.027 kg
Plastic packaging material is marked according to:
« Value
X
9.4
9.5
13.3
3.1.8
5.11
5.11
DIN 6120 _____ ISO 11469 / ISO 1043 _____ SPI
X
The company participates in/ has its own system for collection and
recycling of packaging material. (Refer to section 13)
X
X
C1.1
9.6 Product plastic packaging is free from polyvinyl chloride (PVC)
P13.5
Packaging is in conformance with national guidelines, regulations
9.7 and/or standards such as those implementing the EU Directive
94/62/EEC and/or the Ordinance on Packaging, as amended
X
5.11
5.12
10
Recycling
The company has a system for reuse/ recycling of the product
and/or consumables. (see item 13)
10.1
X
C2.1
3.1.7
The TCO'03 certificate holder (or his representative, associated
company or affiliate) shall inform its customers of the possibility to
dispose of the VDU by environmentally acceptable recycling. The
information shall be made available to customers in the
10.2 geographical markets in the following way: (1) For VDUs sold within
EU: Customers in at least three countries where the VDU is sold.
(2) For VDUs sold in Asia: For customers in at least one Asian
country. (3) For VDUs sold in America (North and South): For
customers in at least one country or one state in the USA.
X
X
A.6.3.5
Information about the system for reuse/recycling can be found in
10.3
C4.1
3.1.7
5.12
the user manual or specified elsewhere. (see item 13)
11
Additional Attributes
The supply of spare parts for a repair of the product is guaranteed
for at least 5 years from the termination of the production
11.1
X
X
P6.11 3.1.6
3.1.7
5.2
5.2
Information on modularity of design, expansion capacity and
guarantee are included in product documentation
11.2
5
Requirement
met
IT
Blue
TCO '03
ECMA
(6/99)
ECO Angel
APES
(Apple's Product Environmental Specifications)
Not
Yes No
rel.
Desktop Desktop
CPUs
('02)
Display
12
Additional Information/Notes
Product recycling/takeback systems are local and regionalized.
They may not exist, in the same manner, in all
municipalities/countries. See:
12.1
12.2
Apple has established regional systems for packaging
takeback/recycling in those countries with packaging legislation.
CAS
CFC
CRT
EMAS
EMC
EPS
FPD
HCFC
ISO
Chemical Abstract Service
chlorofluorocarbon
cathode ray tube
EU Eco Management and Audit Scheme
electromagnetic compatibility
expanded polystyrene
flat panel display
hydro chlorofluorocarbon
International Organization of Standardization
IT ECO Association of the Swedish IT and Telecom Industry (formerly SITO)
LCD
liquid crystal display
LDPE
MSDS
PBB
PBDE
PCB
PCT
PVC
PWB
SPI
TBBA
VDU
low density polyethylene
material safety data sheet
polybrominated biphenyl
polybrominated diphenyl ether
polychlorinated biphenyl
polychlorinated terphenyl
polyvinyl chloride
printed wiring board
Society of Plastics Industry
tetrabrominated bisphenol A
visual display unit
6
|