Advantech Computer Monitor ADAM 4561 User Manual

ADAM-4561  
1-Port Isolated USB to  
RS-232/422/485 Converter  
User Manual  
Product Warranty (2 years)  
Advantech warrants to you, the original purchaser, that each of its prod-  
ucts will be free from defects in materials and workmanship for two years  
from the date of purchase.  
This warranty does not apply to any products which have been repaired or  
altered by persons other than repair personnel authorized by Advantech,  
or which have been subject to misuse, abuse, accident or improper instal-  
lation. Advantech assumes no liability under the terms of this warranty as  
a consequence of such events.  
Because of Advantech’s high quality-control standards and rigorous test-  
ing, most of our customers never need to use our repair service. If an  
Advantech product is defective, it will be repaired or replaced at no  
charge during the warranty period. For out-of-warranty repairs, you will  
be billed according to the cost of replacement materials, service time and  
freight. Please consult your dealer for more details.  
If you think you have a defective product, follow these steps:  
1.  
Collect all the information about the problem encountered. (For  
example, CPU speed, Advantech products used, other hardware  
and software used, etc.) Note anything abnormal and list any  
onscreen messages you get when the problem occurs.  
2.  
3.  
Call your dealer and describe the problem. Please have your man-  
ual, product, and any helpful information readily available.  
If your product is diagnosed as defective, obtain an RMA (return  
merchandize authorization) number from your dealer. This allows  
us to process your return more quickly.  
4.  
5.  
Carefully pack the defective product, a fully-completed Repair and  
Replacement Order Card and a photocopy proof of purchase date  
(such as your sales receipt) in a shippable container. A product  
returned without proof of the purchase date is not eligible for war-  
ranty service.  
Write the RMA number visibly on the outside of the package and  
ship it prepaid to your dealer.  
iii  
Declaration of Conformity  
CE  
This product has passed the CE test for environmental specifications  
when shielded cables are used for external wiring. We recommend the use  
of shielded cables. This kind of cable is available from Advantech. Please  
contact your local supplier for ordering information.  
CE  
This product has passed the CE test for environmental specifications. Test  
conditions for passing included the equipment being operated within an  
industrial enclosure. In order to protect the product from being damaged  
by ESD (Electrostatic Discharge) and EMI leakage, we strongly recom-  
mend the use of CE-compliant industrial enclosure products.  
FCC Class A  
Note: This equipment has been tested and found to comply with the limits  
for a Class A digital device, pursuant to part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference when the equipment is operated in a commercial environ-  
ment. This equipment generates, uses, and can radiate radio frequency  
energy and, if not installed and used in accordance with the instruction  
manual, may cause harmful interference to radio communications. Opera-  
tion of this equipment in a residential area is likely to cause harmful inter-  
ference in which case the user will be required to correct the interference  
at his own expense.  
ADAM-4561 User Manual  
iv  
FCC Class B  
Note: This equipment has been tested and found to comply with the limits  
for a Class B digital device, pursuant to part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses  
and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
Technical Support and Assistance  
Step 1. Visit the Advantech web site at www.advantech.com/support  
where you can find the latest information about the product.  
Step 2. Contact your distributor, sales representative, or Advantech's cus-  
tomer service center for technical support if you need additional  
assistance. Please have the following information ready before  
you call:  
- Product name and serial number  
- Description of your peripheral attachments  
- Description of your software (operating system, version, appli-  
cation software, etc.)  
- A complete description of the problem  
- The exact wording of any error messages  
v
Safety Instructions  
1.  
2.  
3.  
Read these safety instructions carefully.  
Keep this User's Manual for later reference.  
Disconnect this equipment from any AC outlet before cleaning.  
Use a damp cloth. Do not use liquid or spray detergents for clean-  
ing.  
4.  
For plug-in equipment, the power outlet socket must be located  
near the equipment and must be easily accessible.  
5.  
6.  
Keep this equipment away from humidity.  
Put this equipment on a reliable surface during installation. Drop-  
ping it or letting it fall may cause damage.  
7.  
8.  
9.  
The openings on the enclosure are for air convection. Protect the  
equipment from overheating. DO NOT COVER THE OPENINGS.  
Make sure the voltage of the power source is correct before con-  
necting the equipment to the power outlet.  
Position the power cord so that people cannot step on it. Do not  
place anything over the power cord.  
10. All cautions and warnings on the equipment should be noted.  
11. If the equipment is not used for a long time, disconnect it from the  
power source to avoid damage by transient overvoltage.  
12. Never pour any liquid into an opening. This may cause fire or elec-  
trical shock.  
13. Never open the equipment. For safety reasons, the equipment  
should be opened only by qualified service personnel.  
14. If one of the following situations arises, get the equipment checked  
by service personnel:  
a. The power cord or plug is damaged.  
b. Liquid has penetrated into the equipment.  
c. The equipment has been exposed to moisture.  
d. The equipment does not work well, or you cannot get it to work  
according to the user's manual.  
e. The equipment has been dropped and damaged.  
f. The equipment has obvious signs of breakage.  
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT  
WHERE THE STORAGE TEMPERATURE MAY GO BELOW -  
ADAM-4561 User Manual  
vi  
20° C (-4° F) OR ABOVE 60° C (140° F). THIS COULD DAM-  
AGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A  
CONTROLLED ENVIRONMENT.  
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS  
INCORRECTLY REPLACED. REPLACE ONLY WITH THE  
SAME OR EQUIVALENT TYPE RECOMMENDED BY THE  
MANUFACTURER, DISCARD USED BATTERIES ACCORD-  
ING TO THE MANUFACTURER'S INSTRUCTIONS.  
The sound pressure level at the operator's position according to IEC 704-  
1:1982 is no more than 70 dB (A).  
DISCLAIMER: This set of instructions is given according to IEC 704-1.  
Advantech disclaims all responsibility for the accuracy of any statements  
contained herein.  
vii  
ADAM-4561 User Manual  
viii  
ADAM-4561 User Manual  
x
2
1
Overview  
Chapter 1 Overview  
1.1 Introduction  
Advantechs ADAM-4561 allows PC users to connect their serial devices  
to systems that use USB interface. By attaching the ADAM-  
4561 to a PC, it will no longer be necessary to open the chassis or turn off  
the PC to install the hub. With the ADAM-4561, the user instantly gets one  
extra high-speed RS-232/422/485 ports. In addition, since the power is  
derived from the USB port, there are not any cumbersome power adapters.  
This makes the ADAM-4561 especially suitable for printers, POS system  
and industrial control devices.  
Compliant with USB v1.1, the ADAM-4561 features a lot of powerful func-  
tions such as high-speed 115.2 Kbps, support for various operat- ing sys-  
tems, independent RS-232/422/485 port and more. By simply plugging in a  
USB hub, theADAM-4561 eliminates configuration issues associated with  
expensive, antiquated card solutions. This eliminates the need to remove  
the PC cover and or to reboot the operating system during installation.  
The user only installs the driver, and follows the on-screen instructions.  
This reduces a lot of program- mingtime.  
The USB interface, now standard on virtually all new PCs, offers signifi-  
cant advantages over earlier bus types. A signal USB interface can con-  
nect up to 127 devices at data rates up to 12 Mbps. This kind of easy and  
convenient connectivity means that your network can grow with your  
needs.  
ADAM-4561 User Manual  
2
   
1.2 Features:  
• Full compliance with USB v1.1 specifications.  
• RS-232/422/485 port supported  
• Transmission speed up to 115.2 Kbps  
• Isolation protection 3,000 VDC provided  
• Automatic RS-485 data flow control  
• No external power supply necessary; the ADAM-4561 derives its power  
from the USB port.  
• Plug-and-play installation.  
• No additional IRQs or I/O ports required.  
• Hot swap function supported  
• Drivers for Widows 98/ME/2000  
3
Chapter1  
 
1.3 Specifications  
Compatibility: USB v1.1 standard  
Interface: Network: USB  
Serial:3-wire RS-232, RS-422, RS-485  
Port: 1 Independent RS-232/422/485 ports  
Connector: Network:USB-type A connector  
Type A to B cable provided  
Serial: twist-pair cable  
Transmission speed: 75 bps to 115.2 Kbps  
Parity bit: odd, even, none  
Data bit: 5, 6, 7, 8  
Stop bit: 1, 1.5, 2  
RS-232 Signals: Tx, Rx, GND  
Isolation protection: 3,000 V  
Driver Supported: Windows 98/ME/2000  
If you have Linux driver needs, please contact Advantech directly.  
Power Consumption:1.5W@5V(Windows98/ME/200)  
Max. Distance: 15 ft (4.6m)  
Case: ABS+PC with captive mounting hardware  
Placement: DIN-rail, panel mounting, piggyback stack  
Operating Temperature: 0 to 70° C  
Storage Temperature: -25° to 80° C  
Operating Humidity: 20% to 95% (non-condensing)  
Storage Humidity: 0% to 95% (non-condensing)  
1.4 Package Checklist  
• ADAM-4561  
• ADAM CD containing ADAM-4561 User Manual and Driver  
• One Type A to Type B USB cable  
• NYLON DIN-rail Mounting Adapter  
• SECC Panel Mounting Bracket  
ADAM-4561 User Manual  
4
   
2
2
Installation & Setup  
Chapter 2 Installation & Setup  
2.1 Hardware Installation  
2.1.1 Network Architecture  
Traditional serial port communication uses a COM port board that slides  
into one of the slots at the back of your PC. With the ADAM- 4561, you  
can access the COM port from USB ports. The ADAM-4561 can be inte-  
grated into the network architecture of any protocol.  
Note:  
All the operating systems on your host  
mustsupport USB v1.1 standard, such as Win-  
dows 98/ME/2000. USB devices are used in  
“Master-Slave” architecture. Before you use  
ADAM-4561, you must determine the master  
PC  
The following illustration shows the network architecture:  
Figure 2.1: Network Architecture  
ADAM-4561 User Manual  
6
       
2.1.2 Network Connection  
When using the ADAM-4561, you will simply plug one end of USB cable  
(included in package) into ADAM-4561, and the other end into the USB  
hub or your host PC.  
2.1.3 Serial Connection  
The model of the ADAM-4561 that you purchased has 10 pin connec- tor  
for connecting serial ports on the bottom of module. Only one set of  
twisted-pair cables is required to transmit both Data and RTS signals for  
RS-485 interface.  
Note:  
In USB v1.1 standard, If you have used the  
COM3, COM4….. COMn of host PC. When  
you plug ADAM-4561 in the host PC, the COM  
port will be COMn+1.  
Wiring for RS-232 Connection  
Figure 2.2: Wiring of RS-232 Connection  
7
Chapter2  
     
Wiring of RS-485 Connection  
Figure 2.3: Wiring of RS-485 Connection  
Wiring of RS-422 Connection  
Figure 2.4: Wiring of RS-422 Connection  
ADAM-4561 User Manual  
8
   
2.1.4 Jumper Settings  
You can use JP1 on ADAM-4561 to configure serial mode. Please refer to  
the picture below for Jumper JP1 location.  
You can choose “On (RS-422 Master)” or “Auto (RS-422 Slave/RS-485  
Automatic Direction Control)” for serial mode. Please refer to the picture  
below.  
For RS-485, if the JP1 is set to “Auto”, the driver automatically senses  
the direction of the data flow and switches the direction of transmission.  
Handshaking is unnecessary. For RS-422, if the JP1 is set to “Auto”, it  
will become RS-422 slave. If the JP1 is set to “On”, the driver is always  
enabled, and always in high or low status. The user must select the mode  
before beginning RS-422 application.  
9
Chapter2  
 
2.2 Software Installation  
2.2.1 Driver and Utility Installation  
In order to use a PC to control serial devices connected to the ADAM-  
4561, you must first have a host running Windows 98/ME/2000. Follow-  
ing are the installation instructions to set up the ADAM-4561.  
Insert the ADAM Utility CD into the CD-ROM drive on the host PC.  
Plug-in the ADAM-4561 to USB port on your PC. You will see the dialog  
window (as shown by figure below) appearing. Choose “Yes, this time  
only“ to continue the installation.  
Choose “Install from a list or specific location (Advanced)” and then  
click the “Next” button.  
ADAM-4561 User Manual  
10  
   
Choose “Search for the best driver in these locations” and click the  
item “Search removable media (floppy, CD-ROM…)”. Click the “Next  
button” to start the installation.  
11  
Chapter2  
After the installation is complete, you will see the dialog window (shown  
by figure below) appearing. Click the “Finish” button to complete the  
installation.  
Your PC will ask you to reboot your computer. After reboot, you can go  
to device manager. You should see your ADAM-4561 is installed well  
(shown by figure below) and you can use it now.  
ADAM-4561 User Manual  
12  

HP Hewlett Packard 75 User Manual
GE Built In Gas s JGP630 User Manual
Fujitsu Computer Monitor D556Q User Manual
Fisher Paykel GC912M User Manual
Fagor America FAGOR 5HA 196 X User Manual
EVGA nForce 680i SLI User Manual
Electrolux Air O Convect 269503 User Manual
Eiki LC XB33N User Manual
Cypress CY7C1317CV18 User Manual
Black Box Computer Hardware PSD 4 User Manual