AT T E6014B User Manual

Quick start guide  
5.8 GHz Cordless  
Telephone/Answering  
System E6012B/  
E6013B/E6014B/  
E3813B  
with caller ID/call waiting  
TONE  
MUTE  
REDIAL  
DELETE  
PAUSE  
Installation and setup  
After battery installation, the battery may have enough charge to allow some  
calls. For best performance, place the handsets in the telephone base or the  
charger and allow to charge for 16 hours before use.  
You can keep the battery charged by returning the handsets to the telephone  
base or the charger after use. When the battery is fully depleted, a recharge  
takes about 12 hours. The average talk time on a fully charged battery is  
about eight hours, and the standby time is approximately five days. Actual  
battery life depends on usage conditions and age of battery.  
1. Plug the battery securely  
into the plug inside the  
handset battery compart-  
ment, matching the color-  
coded label.  
2. Place the battery  
and wires neatly inside  
the compartment.  
3. Slide battery compartment  
cover towards the center  
until it clicks into place.  
4. The battery may have  
enough charge to allow  
for some calls. For best  
performance, place hand-  
set in telephone base or  
charger to charge for at  
least 16 hours before first  
use.  
To replace the battery,  
press in and push outward  
on the tab to open the bat-  
tery compartment cover.  
Lift out the old battery  
and disconnect it from the  
compartment. Follow the  
instructions on this page to  
install and charge the new  
battery.  
TONE  
MUTE  
REDIAL  
DELETE  
PAUSE  
Caution: Use only the supplied rechargeable battery or replacement battery (model 27910,  
part number 89-0099-00-00) or equivalent. To order a replacement battery, visit our website  
Quick reference guide  
CENTER  
RIGHT  
Handset  
UP  
CID  
Press to display caller ID  
information.  
LEFT  
DOWN  
PHONE/FLASH  
Press to make or  
MENU/SELECT  
answer a call. During  
a call, press to receive  
an incoming call if call  
waiting is activated.  
Press to display the menu. Once  
in a menu, press to select an item  
or save an entry or setting. Press  
or  
to scroll up or down  
while in menus. While entering  
names or numbers, press  
to move the cursor.  
or  
MUTE/DELETE  
While on a call, press to  
mute microphone. While  
reviewing the call log,  
DIR  
Press to display directory entries.  
press to delete an individu-  
al entry, or press and hold  
to clear the caller ID log.  
While predialing, press to  
delete digits from a string.  
OFF/CLEAR  
Press to cancel an operation, back  
up to the previous menu, or exit  
the menu display.  
SPEAKER  
REDIAL/PAUSE  
Press to activate hand-  
Press to view redial memory. While  
entering numbers, press and hold  
to insert a dialing pause.  
TONE  
set speakerphone.  
Press again to resume  
normal handset use.  
MUTE  
REDIAL  
PAUSE  
DELETE  
INT  
Press to initiate an intercom con-  
versation or transfer a call.  
Feature menu  
shows a highlighted item  
Feature menu  
Using menus  
DIRECTORY  
DIRECTORY  
Press  
to scroll through menu items.  
CALL LOG  
SETTINGS  
Press MENU/SELECT to select or modify a  
highlighted item.  
Press  
OFF/CLEAR to cancel an opera-  
SOUNDS  
tion, back up to the previous menu, or  
exit the menu display  
DISPLAY  
RINGER VOLUME  
Menu  
NOTE: For more information,  
please refer to the user’s manual.  
Quick reference guide  
Telephone base  
CHARGE/IN USE  
• Flashes when another telephone  
on the same line and on steady  
when one of the handsets is in use.  
VOICEMAIL  
Flashes when you have  
new voice mail (requires  
voice mail service from  
your local telephone com-  
pany.  
• On steady when the answering  
system is answering an incoming  
call.  
• Flashes while an incoming call is  
ringing.  
HANDSET LOCATOR  
• On steady when the handset is  
properly positioned to charge in the  
telephone base.  
Press to make handsets  
beep.  
SETUP  
Press to hear setup  
options.  
ANNC  
Press to review or record  
announcement; press  
again to quit.  
MESSAGE COUNTER  
Number of messages (or  
during playback, message  
number currently playing).  
RECORD  
Press to record a memo  
or after pressing ANNC  
to record an outgoing  
announcement.  
CLOCK  
Press to review or set  
clock.  
X/DELETE  
ANSWER ON  
Press to delete message  
currently playing; press  
and hold to delete all  
old messages.  
Press to turn answering  
system on or off.  
VOLUME  
/REPEAT  
Press to repeat mes-  
sage; press twice to  
play previous message.  
Press to adjust playback  
volume.  
PLAY/STOP  
/SKIP  
Press to start or stop  
message playback.  
Press to skip message.  
NOTE: For more information, please refer to the user’s manual.  
Copyright © 2006 Advanced American Telephones. All rights reserved.  
AT&T and the Globe symbol are trademarks of AT&T Knowledge Ventures,  
licensed to Advanced American Telephones. Printed in China. Issue 2 AT&T 12/06.  
96-006310-010-100  

HP Hewlett Packard 2209T User Manual
Hotpoint Cooktop CH 10755 GF S User Manual
Hobart CG711 User Manual
Hitachi T 19WX User Manual
Emerson HKTV13 User Manual
Cypress CY7C1525JV18 User Manual
BenQ Computer Monitor G925HDA User Manual
Atlantis Land A04 WI2202 User Manual
Asus VIA K8T800 User Manual
AMD 790GX User Manual