Quick Start Guide
Model AT5872
5.8 GHz Cordless
Telephone
STEP 2
Install Telephone Base
1. Plugthepoweradapterintoanelectrical
outlet not controlled by a wall switch,
and the connector into the power jack
at bottom of the telephone base.
2. Plug one end of the telephone line
cord into the telephone line jack at the
bottom of the telephone base. Then
plug the other end of the cord into the
modular wall telephone outlet.
Modular telephone
wall jack
Standard electrical
outlet not controlled
by a wall switch
NOTES:
1. Use only the power cord supplied with this product.
2. Be sure to use an electrical outlet not controlled by a wall switch.
STEP 3
Install and Charge Handset Battery
1. Align the two holes in the plug with
the socket pins in the battery
compartment of the handset, then snap
the plug into place.
2. Place the battery in the compartment.
3. Replace cover by sliding it up into place.
4. Place the handset in the telephone
base.
5. Charge the battery for at least 16 hours
before first use.
STEP 4
Making and Answering Calls
Making Calls
1. Press ON on the handset or SPEAKER
on the telephone base and listen
for dial tone.
2. Dial the telephone number.
Answering Calls
Press ON on the handset or SPEAKER
on
the telephone base.
Ending Calls
Press OFFon the handset or SPEAKER
on
the telephone base to end calls.
NOTE: For more information, please refer to user’s manual.
Choose a Location for Your Telephone
For maximum performance of your
cordless telephone system:
1. Choose a central location for your
telephone base.
2. Install your telephone base and
extensionhandsetsawayfromelectronic
equipmentsuchaspersonalcomputers,
television sets and microwave ovens.
3. In locations where there are multiple
cordlesstelephones,separatetelephone
bases as much as possible.
4. Install your telephone equipment away
from heat sources and sunlight.
Choose a central
location
Avoid television sets
and other electronic
equipment
© 2006 Advanced American Telephones. All rights reserved.
AT&T and the Globe symbol are trademarks of AT&T Corp.,
licensed to Advanced American Telephones.
Printed in China. Issue 1 AT&T 10/06
96-006273-010-000
|