V27m
27” Multimedia Function Display
Operating Instructions
Operating Instructions
Audio Settings (applicable to all modes)..........................19
Function settings .............................................................20
3
China RoHS Regulation Marking Requirements.....................27
4
Important safety notes
Read these notes before operating the device.
1. Read these notes.
2. Follow these notes.
3. Heed all warnings.
4. Operate as per instructions.
5. Do not use this apparatus near water (for example, near the bathtub, kitchen
sink, washbasin, washing machine, in a humid basement, or near the swimming
pool). If the unit is accidentally splashed, please disconnect the power plug
immediately and contact the authorized distributor.
6. Only use a dry cloth for cleaning. Always unplug the monitor power cable before
cleaning.
7. Do not allow any hard object to touch the screen as this may cause permanent
damage.
8. Do not obstruct the vents and install the device in accordance with the
manufacturer’s instructions.
9. Do not install the device near heat sources such as electric heaters, radiators,
ovens or any other heat source including amplifiers.
10. Always use a polarized plug, or a plug with a ground connection. Polarized plugs
have one wide and one narrow flat pin. Grounded plugs have two flat pins and
one round grounding pin. The wider flat pin and round grounding pin are
designed for safety. If the provided plug does not fit your outlet socket, consult
an electrician for a replacement of the obsolete socket.
11. Protect the power cord from being trodden upon or pinched, particularly near the
plug and the point where it exits the apparatus.
12. Only use accessories specified by the manufacturer.
13. Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or supplied with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid the device being tipped
over.
14. Use the correct power source as indicated on the label. Consult the distributor or
the local power company if you are not sure about the power provided to your
home.
15. Unplug the monitor during thunderstorms or if it will not be used for a long time.
5
16. All servicing must be carried out by professional service personnel. Servicing is
required if the device does not work normally, or has been damaged in some
way. For example, if the power cord has been damaged, if liquid has been
spilled on it, it has been exposed to rain or moisture, or it has been dropped.
17. The product may contain lead or mercury. Environmental factors should be
taken into account when you dispose these materials. For disposal or recycling
information, contact the local authority or Electronic Industries Alliance:
18. Damage requiring servicing: Consult a professional service technician under
any of the following circumstances:
A. The power cord or plug has been damaged.
B. Foreign objects or liquid have entered the monitor.
C. The monitor has been rained on.
D. Operation seems to be abnormal or has changed significantly.
E. The monitor has been dropped or its casing has been damaged.
19. Dimensions/stability: All monitors must conform to recommended international
standards in terms of casing design dimensions and stability. Do not push the
monitor on the front of the casing or at the top, it may overturn and be damaged.
Do not put electronic devices or toys on the casing, these may fall and be
damaged, or cause personal injury.
20. Foreign articles and liquid: Do not allow foreign articles or liquid to enter the
casing through the ventilation slots.
6
Connection and preparation of the monitor
Parts list
AOC V27m
Bracket
Base + Screws
Cleaning cloth
Power cord
VGA cable
Operating Instructions
CD-ROM
Warranty card
Quick Installation Guide
HDMI cable
Audio cable
Screws
7
Connection and preparation of the monitor
Installation of the base
Take the monitor and the base out of the carton and assemble them, as
shown in the figure below:
1. Place the monitor face down on a soft cloth or pad on the table. Tighten
the screws in the base to secure the base and bracket.
2. Inset the base into the hole on the bottom of the monitor.
Disassembly of the base
Inset a screw driver into the base mounting hole, press it downwards, and
pull out the base.
8
Connection and preparation of the monitor
Stand the monitor on a stable surface.
1. Choose a position for the monitor that has good ventilation and make
sure the ventilation holes on the cover are clear of obstruction.
2. Ensure the LCD monitor has 15cm of clearance on all sides to provide
proper ventilation.
3. Do not place the LCD monitor near a radiator or other powered devices.
4. Do not use open flames, such as candles, near the monitor to prevent
accidents.
5. Keep the monitor away from high temperatures, direct sunlight, rain or
moisture.
6. To prevent the monitor from tipping over secure it to the table as shown
below.
9
Connection and preparation of the monitor
Installing the monitor on the wall
The monitor conforms to the wall-mounted VESA standard. Please refer to
the instructions for product specifications and details.
To ensure your own safety and that of the monitor, use only the specified
wall-mounting bracket. Please note that wall mounting must be done by a
professional technician.
When the monitor is mounted on a wall it must be possible to access the
connectors at the back. At least 6cm of clearance will be needed between
the monitor and the wall to ensure that there is enough space to insert the
connection cables.
It is important that air should flow freely through the ventilation slots
wherever the monitor is installed.
Do not install the monitor in a confined space.
Power connection
Insert one end of the power cord into the “Power Input” socket on the back
and plug the other end into a 220V power socket.
The monitor consumes a small amount of power in standby mode.
But it should be unplugged from the power socket if it is not to be used for
some time.
10
Turning the LCD Monitor On or Off
1. To turn on:
Connect the AC power to the monitor. Press the power button on the control
panel, and the indicator light will turn blue. After a few seconds the monitor
will be operating normally.
2. To turn off:
Press the power button on the control panel, to turn the monitor off.
3. Indicator status:
①. In normal operating mode, the monitor indicator light will be blue.
②. In standby mode, the light will be orange.
③. In power-off mode, the monitor indicator light will flash blue three times
and then go off.
11
Control Panel and Interface
Side panel
Volume +
Volume -
Menu
Source
Signal Source: Press button to enter the interface of signal source
selections and press again to select the source needed.
when menu is unavailable on display.Once menu occur,
this key is used for confirmation purpose and select to
confirm target you needed.
Menu:
Press to enter or exit the menu.
▲ ▼:
When the menu appears on the screen, use these two
buttons to select the desired option.
Volume:
With the menu displayed on the screen, press these two
buttons to select the desired option. When no OSD
menu is displayed on the screen, the controls will adjust
sound volume.
12
Source Interface
A device with multiple sources can be connected to your monitor. The figure
below shows how to connect.
Tip: If you want to wall mount your monitor, all cables must be connected to
the monitor connectors first.
Whenever an external device is connected to your monitor, please make
sure the monitor is turned off.
When connecting an external device, connect the cable to the connector
with the same color.
PC Signal and
PC Audio Input
Component Input
Earphone Jack
Video/S-Video Input
13
Source Interface
Video/S-Video Input:
Connect the Video or S-Video cable to the DVD player, CD player, Video
Recorder, or Camcorder, etc.
Audio Input: Connect the audio sources (e.g., computer, DVD player, CD
player, Video Recorder, or Camcorder) to the Audio Input connector.
Tip: Audio is shared between S-Video and Video.
14
Source Interface
Auxiliary Component Input:
Connect the auxiliary source audio and video (e.g., computer, DVD player,
CD player, Video Recorder, or Camcorder) to the Component Input
connector.
HDMI Input:
Connect the HDMI source (e.g., computer, DVD player, CD player, Video
Recorder, or Camcorder) to the HDMI Input connector.
15
Source Interface
PC Signal and PC Audio Input:
Connect the PC to the PC input connector on the back of the monitor with a
VGA cable. Also connect the audio cable between PC Audio Input of the
monitor and the PC audio connector.
Earphone Jack:
Earphones can be connected to the Earphone jack.
16
Using the Menu
1. Press the Menu button to display the menu.
2. Select the menu option to be adjusted using the Up or Down key.
3. Enter the submenu by pressing the VOL Up key. Enable or adjust the
function selected by pressing the VOL Up and Down key. The selected
option will be highlighted.
4. Press the Menu button again to exit the menu.
Source Menu
Press Source button to enter the Source menu, including PC, HDMI, Video,
S-video, Component.
17
Using the Menu
Video Settings
Brightness
Contrast
This adjusts the brightness of the screen backlight. The
adjustment range is between 0 and 100.
This adjusts the screen contrast. The adjustment range is
between 0 and 100.
Color Saturation This adjusts the screen color intensity. The adjustment range
is between 0 and 100. This control is not available in PC and
Component modes.
Sharpness
This adjusts the sharpness of the picture. The adjustment
range is between 0 and 100.
Color
Temperature
This option provides four color temperature settings: Normal,
Warm, Cold, and User Setting.
DNR
This control is not available in PC mode.
Image Mode
This option provides four settings: Soft, Standard, Vivid, and
User Setting.
DCR
Enable/disable Dynamic Contrast Ratio.
Restore the video settings to factory mode.
Reset
18
Using the Menu
Audio Settings (applicable to all modes)
Sound Quality Switches between the five audio modes.
Bass
This is used to adjust the bass strength.
This is used to adjust the treble strength.
Treble
Equalizer
The sound adjustment range is 0 to 60. During adjustment from 30
to 0, the sound from the right channel will gradually decrease until it
disappears. During adjustment from 30 to 60, the sound from the left
channel will gradually decrease until it disappears.
Reset
Restore the audio settings to factory mode.
19
Using the Menu
Function settings
Menu Language
Aspect Ratio
This sets the language used for the OSD. There are 24
available languages including English and Simplified Chinese.
4:3
16:9
Movie (This control is not available in PC mode.)
Panorama (This control is not available in PC mode.)
Sleep Timer
This sets the interval before your monitor will automatically
enter standby mode.
OSD Position
This changes the OSD menu display position with 9 options
available.
OSD Transparency This adjusts the transparency of the OSD menu. The
adjustment range is between 0 and 100.
Display Time
This adjusts the display time (in seconds) of the OSD menu.
The adjustment range is between 0 and 60.
Power Saving
Enable/disable Power Saving.
Power-On Recall: Enable/disable Power-On Recall.
Reset
Restores function settings to the factory default.
20
Tips
Do not use any hard object to wipe the screen as this may cause permanent
damage.
Unplug the monitor before cleaning the screen. Clean the screen and casing
with a clean soft cloth to remove dust. Do not use liquid cleaning agents or
aerosols.
Do not allow liquids to enter the LCD display as this may cause damage to
its internal parts.
Mobile phones
Keep all mobile phones away from the monitor. The radio signals from the
phone may cause image deformation and distort the sound. The monitor
may behave abnormally or it may even be damaged.
Waste disposal instructions
We attach great importance to environmental protection. This monitor
contains recoverable and reusable materials.
There are professional companies that dismantle discarded electronic
equipment to recover recyclable material. This minimizes waste and also the
amount of material that needs final disposal. The lamp tubes of this product
contain mercury. Please dispose of this product in accordance with local
laws and regulations.
21
Product Specifications
Model
V27m
Panel Size (Diagonal)
Native Resolution
686mm (27”)
1920 x 1080
Viewing Angle
Horizontal 170° / Vertical 160° (Typ.)
Brightness
300cd/m2
Contrast Ratio
60000:1
Speaker Output
3W x 2
Available Voltage Range
Power Consumption (Load)
AC100~240V 50/60Hz
≦60W
≦1W
Power Consumption (Idle)
Dimension (W x H x D)
(with base and bracket)
680 x 546 x 262mm
Not included
Wall-mount Accessories
Wall-mount Dimension
100 x 100mm
M4 x 4 pcs (screws)
Environmental Requirements
Operating Temperature
Humidity
0℃ ~ 35℃
20% ~ 80%
-20℃ ~ 50℃
10% ~ 90%
Storage Temperature
Humidity
22
Supported Resolution
Default PC Mode
Standard Resolution
H. Frequency(kHz) V. Frequency(kHz)
VGA
VGA
VGA
VGA
640×480 @60Hz DMT
640×480 @67Hz MAC
640×480 @72Hz DMT
640×480 @75Hz DMT
31.469
35.000
37.861
37.500
31.469
35.156
37.879
48.077
46.875
49.725
48.363
56.476
60.023
60.241
67.500
60.000
63.981
79.976
55.935
59.940
66.667
72.809
75.000
70.087
56.250
60.317
72.188
75.000
74.500
60.004
70.069
75.029
74.927
75.000
60.000
60.02
Dos-mode 720×400 @70Hz DOS
SVGA
SVGA
SVGA
SVGA
SVGA
XGA
800×600 @56Hz DMT
800×600 @60Hz DMT
800×600 @72Hz DMT
800×600 @75Hz DMT
832×624 @75Hz
1024×768 @60Hz DMT
1024×768 @70Hz DMT
1024×768 @75Hz DMT
1024×768 @75Hz MAC
1152×864 @75Hz DMT
1280×960 @60Hz DMT
1280×1024 @60Hz DMT
1280×1024 @75Hz DMT
XGA
XGA
XGA
***
***
SXGA
SXGA
75.025
59.887
59.901
WXGA+ 1440×900 @60Hz CVT16:10
WXGA+ 1440×900 @60Hz RB CVT16:10 55.469
23
Supported Resolution
Standard Resolution
H. Frequency(kHz) V. Frequency(kHz)
WSXGA 1680X1050 @60Hz CVT16:10 65.290
1680X1050 @60Hz RB
59.954
59.883
60.000
59.94
WSXGA
64.674
67.500
31.469
CVT16:10
HD
1920×1080@60Hz
480P@60Hz for SDTV Digital
only
SD
576P@50Hz for SDTV Digital
only
SD
HD
HD
HD
HD
HD
HD
31.250
45.000
37.500
33.750
28.125
67.500
56.250
50.000
60.000
50.000
60.000
50.000
60.000
50.000
720P@60Hz for HDTV Digital
only
720P@50Hz for HDTV Digital
only
1080i@60Hz for HDTV Digital
only
1080i@50Hz for HDTV Digital
only
1080P@60Hz for HDTV Digital
only
1080P@50Hz for HDTV Digital
only
24
Troubleshooting
Before calling our Customer Service, check this troubleshooting list to
understand the symptoms and solutions to your problems.
Symptoms
Items to be inspected and measures to be taken
Check whether the power cord of the monitor is plugged into
the outlet.
Unplug the monitor from the mains, wait for 60 seconds,
plug it into the outlet again and turn it on.
No power
There is no need to take any action because the LCD panel
A static colored spot is manufactured using high technology to display the refined
appears on your TV picture details. Sometimes an inactive pixel can be
screen.
displayed as a static red, blue, green or black spot on the
screen. This will not affect monitor performance.
No image
Adjust the contrast and brightness settings.
Normal image but no Turn up the volume
sound
Check that a proper source is selected.
Normal sound but
poor color
Adjust the contrast, saturation and brightness settings.
When an external device (such as S-VHS video recorder or
camcorder) is connected, the image quality may be poor.
Turn off other external devices for the time being.
Poor image quality
This may be caused by electronic interference such as a
hair dryer or nearby fluorescent tube. Turn off the device.
Horizontal dotted line
Check that the VGA connection is secure.
VGA mode does not Check that a proper signal source is selected.
work
Check if you have selected the correct resolution for the PC.
Check the video card settings of the PC.
In VGA mode, black
bars appear on the
top and bottom of the
VGA display
Set the PC refresh rate to 60Hz.
25
Glossary
Audio/video input
These connectors (RCA-type plug) are located on the back of the monitor. It
is specially designed to be used with a video recorder (or other accessories)
to receive higher image resolution and sound.
S-Video input
Connects directly to high resolution video sources, such as a Super VHS
recorder, disc player etc. and provides better image resolution and definition.
Component signal input
Allows the monitor to connect directly to high resolution video sources, such
as the component signal input of a DVD player and digital television. It
provides better image resolution and definition.
Menu
This is the function control list displayed on the monitor and used for
adjustments.
Sleep timer
The monitor can be set to turn off after a fixed amount of time using this
feature.
26
China RoHS Regulation Marking Requirements
According to China's "Management Methods for Controlling Pollution by Electronic
Information Products" or commonly referred to as China RoHS, the following lists the
names and content of the toxic or hazardous substances or elements that may be
contained in this product.
Products applicable to this table
Display (LCD or CRT), flat panel TV (LCD and Plasma), and monitor
Toxic and Hazardous Substances or Elements
Toxic and Hazardous Substances or Elements
Lead Mercury Cadmium Hexavalent Polybro-minated
Polybro-
Part Name
(Pb)
(Hg)
(Cd)
Chromium
biphenyls (PBB)
minated
diphenyl ethers
(PBDE)
(Cr6+
)
Casing
O
X
O
O
O
O
O
O
O
O
O
O
CRR Display
LCD Display/ Lamp
Tube
X
X
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Plasma Display
Circuit Board
Assembly*
Power Adapter
Power Cord/Cable
Remote Control
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
* The circuit board assembly includes the printed circuit board and its components, such as resistors,
capacitors, integrated circuits, connectors, etc.
O: Indicates that the toxic and hazardous substances contained in all of the homogeneous material for this
part is below the “Limit Requirements Standard for the Toxic and Hazardous Substances in Electronic
Information Products.”.
X: Indicates that this toxic and hazardous substance contained in at least one of the homogeneous materials
used for this part is above the “Limit Requirements Standard for the Toxic and Hazardous Substances in
Electronic Information Products;” however, the part marked with “X” complies with the EU RoHS Regulations
(exempted).
This mark indicates the period (10 Years) that the toxic and hazardous
substances or elements contained in this electronic information product will not
leak or change under normal operating conditions. No serious damage to
persons, property, or environment will occur when this product is used.
27
|
