Verizon LG TM510 User Manual

1 8

2 0 0 2 . 0 D 3 A . T E :

P / N : M M B B 0 0 2 7 4 0 1

) 4 1 ( .

L G - T M 5 1 0

G u í a d e l u s u a r i o

C D M A / A M P S / P C S

T E L É ^GF O N O D E M O D O T R I P L E D E

CDMA/AMPS/PCS TRI MODE PHONE

User Guide

LG-TM510

Phone components

The following shows the key components of your

IMITED WARRANTY STATEMENT

mobile phone.

1. WHAT THIS WARRANTY COVERS:

LG offers you a limited warranty that the enclosed subscriber unit and

its enclosed accessories will be free from defects in material and

workmanship, according to the following terms and conditions:

The limited warranty for the product extends for ONE (1) year

beginning on the date of purchase of the product.

Earpiece

Cellcase

The limited warranty extends only to the original purchaser of the

product and is not assignable or transferable to any subsequent

purchaser/end user.

This warranty is valid only for the original purchaser of the product

during the warranty period as long as it is in the U.S., including

Alaska, Hawaii, U.S. Territories, and Canada.

The external housing and cosmetic parts are free of defects at the

time of shipment and, therefore, shall not be covered under these

limited warranty terms.

LCD Screen

Antenna

Upon request from LG, the consumer must provide information to

prove the date of purchase.

The customer shall bear the cost of shipping the product to the

Customer Service Department of LG. LG shall bear the cost of

shipping the product back to the consumer after completion of

service under this limited warranty.

Lamp

Soft Key1

Soft Key2

Message Key

Mouse Key

2. WHAT THIS WARRANTY DOES NOT COVER:

Defects or damages resulting from use of the product in other than

its normal and customary manner.

Side Keys

Defects or damages from abnormal use, abnormal conditions,

improper storage, exposure to moisture or dampness, unauthorized

modifications, unauthorized connections, unauthorized repair,

misuse, neglect, abuse, accident, alteration, improper installation,

or other acts which are not the fault of LG, including damage

caused by shipping, blown fuses, and spills of food or liquid.

Breakage or damage to antennas unless caused directly by defects

in material or workmanship.

Headset Jack

Alphanumeric

Keypad

Buzzer

Scroll Keys

That the Customer Service Department at LG was not notified by

consumer of the alleged defect or malfunction of the product

during the applicable limited warranty period.

Microphone

Products which have had the serial number removed or made

illegible.

This limited warranty is in lieu of all other warranties, express or

implied either in fact or by operations of law, statutory or

Please refer to the overview descriptions of each

special feature on Page 9.

otherwise, including, but not limited to, any implied warranty of

marketability or fitness for a particular use.

10 Driver Safety Tips

Your wireless phone gives you the powerful ability to

communicate by voice almost anywhere, anytime. An important

responsibility accompanies the benefits of wireless phones, one

that every user must uphold.

Damage resulting from use of non-LG approved accessories.

All plastic surfaces and all other externally exposed parts that are

scratched or damaged due to normal customer use.

Products operated outside published maximum ratings.

Products used or obtained in a rental program.

Consumables (such as fuses.)

3. STATE LAW RIGHTS:

When operating a car, driving is your first responsibility. When

using your wireless phone behind the wheel of a car, practice

good common sense and remember the following tips:

No other express warranty is applicable to this product. THE

DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE

IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED TO

THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG

INFOCOMM INC. SHALL NOT BE LIABLE FOR THE LOSS OF

USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY

OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, ARISING

OUT OF THE USE OF, OR INABILITY TO USE, THIS PRODUCT

OR FOR ANY BREACH OF ANY EXPRESS OR IMPLIED

WARRANTY, INCLUDING THE IMPLIED WARRANTY OF

MARKETABILITY APPLICABLE TO THIS PRODUCT.

1. Get to know your wireless phone and its features such as speed

dial and redial. Carefully read your instruction manual and

learn to take advantage of valuable features most phones offer,

including automatic redial and memory. Also, work to

memorize the phone keypad so you can use the speed dial

function without taking your attention off the road.

Some states do not allow the limitation of incidental or consequential

damages or limitations on how long an implied warranty lasts; so

these limitations or exclusions may not apply to you. This warranty

gives you specific legal rights and you may also have other rights

which vary from state to state.

2. When available, use a hands-free device. A number of hands-

free wireless phone accessories are readily available today.

Whether you choose an installed mounted device for your

wireless phone or a speaker phone accessory, take advantage of

these devices if available to you.

4. HOW TO GET WARRANTY SERVICE:

3. Position your wireless phone within easy reach. Make sure you

place your wireless phone within easy reach and where you can

reach it without removing your eyes from the road. If you get

an incoming call at an inconvenient time, if possible, let your

voicemail answer it for you.

To obtain warranty service, please call the following telephone

number from anywhere in the continental United States:

Tel. 1-800-793-8896

www.lgeservice.com

Please call or write for the location of the LGE authorized service

4. Suspend conversations during hazardous driving conditions or

situations. Let the person you are speaking with know you are

driving; if necessary, suspend the call in heavy traffic or

hazardous weather conditions. Rain, sleet, snow and ice can be

hazardous, but so is heavy traffic. As a driver, your first

responsibility is to pay attention to the road.

center nearest you and to obtain warranty claim procedures.

Electronics Service

201 JAMES RECORD ROAD, HUNTSVILLE, AL 35824

5. Do not take notes or look up phone numbers while driving. If

you are reading an address book or business card, or writing a

to-do list while driving a car, you are not watching where

you are going. It is common sense. Don t get caught in a

dangerous situation because you are reading or writing and not

paying attention to the road or nearby vehicles.

10. Call roadside assistance or a special wireless non-emergency

assistance number when necessary. Certain situations you

encounter while driving may require attention, but are not

urgent enough to merit a call for emergency services. But you

can still use your wireless phone to lend a hand. If you see a

broken-down vehicle posing no serious hazard, a broken

traffic signal, a minor traffic accident where no one appears

injured or a vehicle you know to be stolen, call roadside

assistance or other special non-emergency wireless number.

6.Dial sensibly and assess the traffic; if possible, place calls when

you are not moving or before pulling into traffic. Try to plan

your calls before you begin your trip or attempt to coincide

your calls with times you may be stopped at a stop sign, red

light or otherwise stationary. But if you need to dial while

driving, follow this simple tip -- dial only a few numbers,

check the road and your mirrors, then continue.

For more information, please call to 888-901-SAFE, or visit our

website www.wow-com.com

7. Do not engage in stressful or emotional conversations that may

be distracting. Stressful or emotional conversations and driving

do not mix; they are distracting and even dangerous when you

are behind the wheel of a car. Make people you are talking

with aware you are driving and if necessary, suspend

conversations which have the potential to divert your attention

from the road.

8. Use your wireless phone to call for help. Your wireless phone

is one of the greatest tools you can own to protect yourself and

your family in dangerous situations -- with your phone at your

side, help is only three numbers away. Dial 911 or other local

emergency number in the case of fire, traffic accident, road

hazard or medical emergency. Remember, it is a free call on

your wireless phone!

9. Use your wireless phone to help others in emergencies. Your

wireless phone provides you a perfect opportunity to be a

Good Samaritan in your community. If you see an auto

accident, crime in progress or other serious emergency where

lives are in danger, call 911 or other local emergency number,

as you would want others to do for you.

Provided by the Cellular Telecommunications Industry

Association

THIS PHONE MEETS THE GOVERNMENT’S

REQUIREMENTS FOR EXPOSURE TO RADIO

WAVES.

Before a phone is available for sale to the public, it must

be tested and certified to the FCC that it does not exceed

the limit established by the government-adopted

requirement for safe exposure. The tests are performed in

positions and locations (e.g., at the ear and worn on the

body) as required by the FCC for each model. The highest

SAR value for this phone when tested for use at the ear is

1.42mW/g and when worn on the body, as described in

this user guide, is 1.33mW/g. (Body-worn measurements

differ among phone models, depending upon available

accessories and FCC requirements.) While there may be

differences between the SAR levels of various phones and

at various positions, they all meet the government

requirement for safe exposure.

Your wireless phone is a radio transmitter and receiver. It

is designed and manufactured not to exceed the emission

limits for exposure to radio frequency (RF) energy set by

the Federal Communications Commission of the U.S.

Government. These limits are part of comprehensive

guidelines and establish permitted levels of RF energy for

the general population. The guidelines are based on

standards that were developed by independent scientific

organizations through periodic and thorough evaluation of

scientific studies. The standards include a substantial

safety margin designed to assure the safety of all persons,

regardless of age and health.

The FCC has granted an Equipment Authorization for this

phone with all reported SAR levels evaluated as in compliance

with the FCC RF emission guidelines. SAR information on this

phone is on file with the FCC and can be found under the

Display Grant section of http://www.fcc.gov/oet/fccid after

searching on FCC ID BEJTM510.

The exposure standard for wireless mobile phones

employs a unit of measurement known as the Specific

Absorption Rate, or SAR. The SAR limit set by the FCC is

1.6W/kg. Tests for SAR are conducted using standard

operating positions specified by the FCC with the phone

transmitting at its highest certified power level in all tested

frequency bands. Although the SAR is determined at the

highest certified power level, the actual SAR level of the

phone while operating can be well below the maximum

value. This is because the phone is designed to operate at

multiple power levels to use only the power required to

reach the network. In general, the closer you are to a

wireless base station antenna, the lower the power output.

Additional information on Specific Absorption Rates (SAR)

can be found on the Cellular Telecommunications Industry

Association (CTIA) website at http://www.wow-com.com

In the United States and Canada, the SAR limit for mobile

phones used by the public is 1.6 watts/kg (W/kg) averaged

over one gram of tissue. The standard incorporates a

substantial margin of safety to give additional protection for

the public and to account for any variations in

measurements.

SUBJECT

The LG-TM510 phone has been designed to operate

on the latest digital mobile communication technology,

Code Division Multiple Access (CDMA). CDMA digital

technology has greatly enhanced voice clarity and can

provide a variety of advanced features. Currently,

CDMA mobile communication technology has been

commercially used in Cellular and Personal

Communication Service (PCS).

The difference between them is the operating frequency

spectrum. Cellular uses 800 MHz and PCS uses 1.9

GHz. The LG-TM510 phone can operate on both

frequencies, so it is referred to as a dual-band phone.

Also, the LG-TM510 phone works on Advanced Mobile

Phone Service (AMPS). We call it a tri-mode phone. If

one of the Cellular, PCS, and AMPS base stations is

located nearby, the call fail rate of the tri-mode phone is

less than a dual-band phone or a single-band phone.

CDMA technology adopts DSSS (Direct Sequence

Spread Spectrum.) DSSS enables the phone to keep

communication discreet and allows one frequency

channel to be used by multiple users in the same

specific area, resulting in increased capacity 10 times

more compared to the analog mode currently used.

Soft/Softer Handoff, Hard Handoff, and Dynamic RF

power control technologies are combined into this

phone to reduce interruptions in a middle of a call.

Cellular and PCS CDMA network consists of MSO

(Mobile Switching Office), BSC (Base Station Controller),

BTS (Base station Transmission System), and MS

(Mobile Station). The following table lists some major

CDMA Standards.

Introduction

Highlights

Congratulations! Your new mobile phone will change your

way of communicating and is a compact, lightweight

personal communication system with added features for

the person on the go. Our advanced digital mobile

communication technology has the following features:

Designator

TIA/EIA/IS-95-A

ANSI J-STD-008

TIA/EIA/IS-634

TIA/EIA/IS/651

TIA/EIA/IS-41-C

TIA/EIA/IS-124

TIA/EIA/IS-96-B

TIA/EIA/IS-99

Description

Protocol between MS and BTS for Cellular & AMPS

Protocol between MS and BTS for PCS

MAS-BS

CDMA Standard

Basic air interface

Large, easy-to-read, 5-Line, backlit LCD with status

icons.

PCSC-RS

Network

Service

Intersystem operations

Nom-signaling data comm.

Speech CODEC

Paging, messaging, voicemail, and caller ID.

18-key keypad.

Long battery standby and talk times.

Assign data and fax

Short message service

Packet data

Menu-driven interface with prompt for easy

operation and configuration.

TIA/EIA/IS-637

TIA/EIA/IS-657

TIA/EIA/IS-97

Cellular base station

Cellular mobile station

PCS personal station

PCS base station

Any key answer, auto redialing, one touch and

speed dialing with 199 memory locations.

TIA/EIA/IS-98

Performance

ANSI J-STD-018

ANSI J-STD-019

TIA/EIA/IS-125

Multi language (two languages: English and

Spanish.)

Speech CODEC

Optional accessories (see pages 72~73)

TSB -74: Protocol between an IS-95A system and

ANSI J-STD-008

Those guidelines are consistent with the safety standard

previously set by both U.S. and international standards bodies.

The design of this phone complies with the FCC guidelines

and these international standards.

Important Information

This user guide provides important information on the

use and operation of the phone. For best performance

and to prevent any unanticipated damage to, or misuse

of, the phone, please carefully read all of the information

in this manual prior to use. Any unapproved change or

modification will void your warranty.

CAUTION

Use only the supplied and approved antenna. Use of

unauthorized antennas or modifications could impair call quality,

damage the phone, or result in violation of FCC regulations.

Do not use the phone with a damaged antenna. If the damaged

antenna comes into contact with skin, a minor burn may result.

Contact your local dealer for replacement of the antenna.

Check Accessories

Your mobile phone comes with standard accessories of

a one-slot desktop charger and a rechargeable battery.

Please make sure that those accessories are included.

Body-worn Operation

This device was tested for typical body-worn operations with the

back of the phone kept

with FCC RF exposure requirements, a minimum separation

distance of inches (2 ) must be maintained between the

inch (2 ) from the body. To comply

user’s body and the back of the phone, including the antenna,

whether extended or retracted. Third-party belt-clips, holsters,

and similar accessories containing metallic components should

not be used. Body-worn accessories that cannot maintain

inch (2 ) separation distance between the user’s body and the

back of the phone, and have not been tested for typical body-

worn operations may not comply with FCC RF exposure limits

and should be avoided.

Before You Start

Safety Instructions

WARNING! To reduce the possibility of electric shock, do not

expose your phone to high humidity areas, such as the bathroom,

swimming pool, etc.

IMPORTANT! Please read the SAFETY AND GENERAL

INFORMATION on page 75 prior to using your phone.

Vehicle Mounted External Antenna

(optional, if available)

A minimum separation distance of 8 inches (20 ) must be

maintained between the user/bystander and the vehicle mounted

external antenna to satisfy FCC RF exposure requirements.

FCC RF Exposure Information

WARNING! Read this information before operating the phone

In August 1996, the Federal Communications Committee

(FCC) of the United States with its action in Report and Order

FCC 96-326 adopted an updated safety standard for human

exposure to radio frequency (RF) electromagnetic energy

emitted by FCC regulated transmitters.

For more information about RF exposure, visit the FCC website

at www.fcc.gov

FCC Part 15 Class B Compliance

Contents

This device and its accessories comply with part 15 of

FCC rules. Operation is subject to the following two

conditions: (1) This device and its accessories may not

cause harmful interference, and (2) this device and its

accessories must accept any interference received,

including interference that cause undesired operation.

Introduction

Highlights

Important Information

Check Accessories

Before You Start

FCC RF Exposure Information

Chapter 1. Getting Started

Cautions

Caution For Battery Use

Do not disassemble.

Do not short-circuit.

Do not expose to high temperature: 60 C (140 F)

Do not incinerate.

Phone Overview

Onscreen Icons

Battery Disposal

Entering Information Using T9 Text Input

Using the Battery

Must be recycled or disposed of properly.

Chapter 2. Basic Functions

Turning the Phone On and Off

Making a Call

Caution For Adapter/Charger Use

Using the wrong battery adapter/charger may

damage your phone and void your warranty. The

battery may burst, causing injury and damage.

Correcting Dialing Mistakes

Receiving Calls

The adapter/charger is intended for indoor use only.

Using Quick Mode

Call Waiting

Do not expose the battery adapter/charger to direct

sunlight or use it in any place with high humidity, such

as the bathroom.

Mute

Redialing Calls

Adjusting the Volume

Power Save Mode

Signal Strength

Emergency Dialing

Mini Display

Old Text

Outbox

Speed Dialing

Erase Message

Setting

Caller ID

Phone Book Features

Chapter 3. Menu Features

Browser Msg., Browser Set

Chapter 6. Functions Used During a Call

Mute

General Guidelines to MENU Access and Settings 32

Sound

Memo

Display

System

Features

Utility

Recording

Key Tone

Voice Privacy

Chapter 7. MiniBrowser

Overview

Security

Accessing the MiniBrowser

Chapter 8. Accessories

Chapter 9. Appendix

Voice Service

Browser Start

Chapter 4. Book Features

Call History

Chapter 10. Safety Guidelines

Safety Information

Phone Book

Scheduler

FDA Consumer Update

Scheduler Item Descriptions

Scheduler

Chapter 11. Frequently Asked Questions

Wake Up

My Phone#

Chapter 5. Message Features

Voice

Send Message

New Text

Phone Overview

Chapter 1. Getting Started

Function

Key Description

The red light is illuminated when you turn the power on, when

you have incoming calls or messages.

Lamp

Cautions

Displays messages and indicator icons.

Use to place or answer calls.

Using the phone in proximity to receiving equipment

(i.e., TV or radio) may cause interference.

LCD Screen

Keep your phone in a safe place when not in use.

Use to turn power on/off and to disconnect a call.

Use to return to the previous menu.

Only use the batteries, antennas, and chargers

provided by LG. Using unauthorized accessories could

void your warranty.

Use to quickly access

text and voicemail notification

Mouse Key

Cellcase

messages.

calendar, outgoing call log,

phonebook Find Name.

Only authorized personnel should service the phone

and its accessories. Faulty installation or service may

result in an accident and may void your warranty.

Close the cellcase to end a call in progress.

Open the cellcase to answer an incoming call.

Soft Key 1

Do not hold the antenna while the phone is in use.

Soft Keys

Use to display the function setting menu.

Do not use the phone in designated No Cellular

Phone Use areas, such as near blasting areas or in

medical facilities.

Soft Key 2

Use to go back one level in a menu.

Side Keys

Use to adjust key beep volume (in standby mode) and

earpiece volume (during a call).

Do not expose the phone to high temperature or

humidity.

Use to scroll through the memory locations and menu items.

- In standby mode, set the manner mode by pressing

(for 2 seconds)

- In standby mode, set the lock mode by pressing

3 seconds)

Avoid getting your phone wet. If the phone gets wet,

turn the power off immediately and remove the

battery. If the phone malfunctions, return it to the

dealer for service.

Scroll Keys

. (for

Alphanu-

meric Keypad

Use the keys to enter numbers, characters and choose menu

items.

Avoid shock or impact on the phone.

Use to backspace and delete a single space or character.

Press and hold to delete entire words.

When manual mode is selected from Voice Setup menu, if

Clear Key

you press

, your phone will prompt you to speak a

voice command. You can then access the programmed

phone number. (This feature is available only when voice

command is programmed.)

Onscreen Icons

Entering Information Using T9 Text Input

The phone screen displays several icons which appear

You can edit the Banner, Scheduler, Short Message

when the phone is powered on.

and Phone Book using T9 Text Input.

Key Functions

Icon

Description

(Up and Down): Press to scroll and select a mode

through menus.

Displays the current signal strength received

by the phone as indicated by the number of

bars on the screen.

(1) You can scroll through the modes using (Down)

key in the following order: T9En

Spc T9HLP T9En

Eng

123

No service

(2) You can scroll through the modes using (Up) key

in the following order: T9En T9HLP Spc

123 Eng T9En

The phone is not receiving a system signal.

In use

A call is in progress.

No icon indicates the phone is in standby mode.

Within Phone book, you can change mode by pressing

Soft Key 2.

Digital indicator

Digital service is available.

- SHIFT key (

): Used to change the letter case.

Analog indicator

Analog service is available.

(Type Text): In T9 mode, press one key per

letter to enter text.

Indicates that a text message or voicemail has

been received.

(Type Numbers): In 123 (Numbers) mode, press

once to enter numbers.

Roaming

(Next) In T9 mode, press to display other matching

The phone is outside of its home service area.

words.

Charge level

Indicates battery charge level.

(Punctuation): In T9 mode, press to insert punctuation

into a word and to complete a sentence.

(Shift): Press to change the letter case.

(Space): Press to complete a word or punctuation

and insert a space.

(Clear): Press to backspace and delete a single

space or character. Press and hold to delete entire

words.

Initial Cap (T9En/Eng)

Input mode

Text Input provides five modes for entering text,

numbers, special characters, and punctuation.

Only the first letter is capitalized.

Caps Lock (T9EN/ENG)

T9En (T9) Mode

Press

to change letter case to Caps Lock.

Type text using one keystroke per letter. The default is

T9 mode.

All subsequent letters are capitalized.

Lowercase (T9en/eng)

Eng (Multi-tap) Mode

Press

again to change letter case to lowercase.

Use ENG mode to add words to the T9 database.

Examples Using T9 Text input

123 (Numbers) Mode

Typing In T9 Mode

Type numbers using one keystroke per number.

To change to 123 mode in a text entry field, press

until 123 mode is displayed.

To type a new message, follow these steps:

1. Press :

2. Press :

3. Press :

4. Press :

to change letter case, if necessary.

Spc (Special Characters) Mode

Insert special characters and punctuation.

to complete the word and add a space.

You may use any of the 33 special characters. Enter

the number next to the character you want to insert. In

Spc mode press Mouse Key (

the following characters:

) to cycle through

5. Display : Call the office

Using the NEXT Key

’

(

)

[

;

After you have finished typing a word, if the word

displayed is not the word you want, press

additional choices.

to display

”

}

]

{

For example, follow these steps:

1. Press :

T9HLP (T9Help) Mode

2. Display : Good

Display T9 Help Text.

3. Press :

Changing Letter Case

4. Display : Home, Gone, Hood......

These are three options for selecting letter case:

Adding Words to the T9 Database

Using the Battery

Charge the battery fully before the initial use of

the phone.

If a word is not in the T9 database, add it using Eng

(Multi-tap) mode text entry. The word is automatically

added to the T9 database when you return to T9 mode.

For example, follow these steps:

The phone comes with a rechargeable battery. Charge

the battery fully prior to using. Keep the battery

charged while not in use in order to maximize talk time

and standby time when using the phone.

1. Press :

mode

to change letter case to Eng (multi-tap)

Installing the Battery

2. Press :

To install the battery, insert the bottom of the battery

into the opening on the back of the phone. Then,

push the battery down until the latch clicks.

3. Display : Imt

4. Press :

to change letter case to T9 mode and

then, the word of Imt will be added to the T9 database.

5. Press :

to erase the existing word of Imt

6. Press :

7. Display : got

8. Press :

9. Display : imt

Examples Using Eng (Multi-tap) Text Input

Removing the Battery

To type a new message in Eng (Multi-tap) Mode, follow

these steps:

Turn the power off. (If power is on, a loss of stored

numbers and messages may occur.)

Lift the removal button to detach the battery.

1. Press :

to change letter case to Eng mode

2. Press :

to change to ENG Caps Lock mode

3. Press :

4. Display : LG

Battery Charge Level

Red light indicates the battery is being charged.

Green light indicates the battery is fully charged.

The battery charge level is shown on the top right of

the LCD screen.

Charge time will vary, depending upon battery level.

Maximum charge time for a fully discharged battery

will not exceed 3 hours.

Caring for the Battery

When the battery charge level becomes low, the low

battery sensor will alert you in three ways: Sounding

an audible tone, blinking the battery icon outline, and

displaying LOW BATTERY WARNING! If the battery

charge level becomes exceedingly low, the phone will

automatically power off and any function in progress

will not be saved.

1. To recharge the battery, you do not need to wait

until the battery is completely discharged.

2. Use only LG batteries and chargers. LG’s chargers

are designed to maximize battery life.

3. Do not disassemble or short-circuit the battery.

4. Keep the metal contacts of the battery clean.

Using the Desktop Charger

5. Replace the battery when it no longer provides

acceptable performance. The battery may be recharged

five hundred times before it needs replacing.

The desktop charger has a slot for recharging batteries.

The slot accommodates the phone and battery for

charging.

6. Recharge the battery if it has not been used for a

long time to maximize the battery life.

Warning! Use only the desktop charger provided with the

phone. Using the wrong charger may cause damage to

your phone or battery.

7. Do not expose the battery charger to direct sunlight or

use it in high humidity areas, such as the bathroom.

1. Plug the charger into a wall outlet.

8. Do not leave the battery in hot or cold places; this may

deteriorate the battery performance.

The phone must be charged from a

110V power source only.

2. Insert the phone with an installed

battery, or a battery alone, into the slot

of the charger.

If the phone is locked, enter the lock code.

Chapter 2. Basic Functions

Call Failed indicates that the call did not go through

This phone has been restricted on the display

screen means that outgoing call restricted mode

is turned on.

Turning the Phone On and Off

Turning the Phone On

1. Install a charged battery or connect the phone to an

external power source such as the cigarette lighter

adapter or hands-free kit.

If you want to turn off this function, take the

following steps.

6 Security

No Ok

Lock code insert

2. Press

for a few seconds until the red light on

Restrict

the middle of the phone flashes.

4. Press

to disconnect the call.

Fully extend the antenna for the best performance.

Correcting Dialing Mistakes

If you make mistakes in dialing a number, press

As with any other radio device, avoid any unnecessary

contact with the antenna while your phone is on.

once to erase the last entered digit or hold down

for at least two seconds to delete all digits, or simply

press Soft Key 2 Back to exit dialing state.

Turning the Phone Off

1. Press and hold

until the display screen turns

off, then release the key.

2. Protect the antenna by pushing it back into the phone,

if extended.

Receiving Calls

1. When the phone rings, open cellcase, or if cellcase

is open, press any key (except

answer.

) to

Making a Call

When you make a call, follow these simple steps:

To mute the ringer during a call, press

Keys(

or vibrating.

or Side

) once. The current call will stop ringing

1. Make sure the phone is turned on.

If not, press

2. Enter the phone number, with area code, if needed.

3. Press

2. Press

to disconnect the call.

In call waiting mode, the present call is put on hold as

you answer another incoming call.

This service is provided by your service provider.

To release Lock Mode

When the call waiting function is activated, your phone

will beep if you have an incoming call. Your phone may

also display the incoming caller’s identification.

Press Soft Key 1Unlock , then enter password

(4 digits).

Lock code (password) is commonly the last 4 digits of

your phone number.

Using Quick Mode

Manner Mode

Use Manner Mode in a public place.

Call Waiting

Your service provider may offer a call waiting function.

When using your phone, you may hear two beeps

indicating another incoming call. When call waiting is

enabled, you may put the active call on hold while you

answer the other incoming call. Check with your service

provider regarding this function.

1. Hold down

for 2 seconds and Manner Mode

will be activated.

When Manner Mode is set, Manner Mode is displayed

on the LCD screen.

When Manner Mode is set, the key tone does not

sound and the phone is automatically set to vibrate

mode for incoming calls.

1. Press

2. Press

to receive a waiting call.

again to switch between calls.

To release Manner Mode, press

again until

Mute

Normal Mode Entered! is displayed.

This function prevents your voice from being transmitted,

but you can still hear the other party.

Lock Mode

Use to prevent others from using your phone.

1. Press Soft Key 1 Menu and

during a call.

1. In standby mode, to activate Lock Mode, press

(for 3 seconds).

2. To release Mute, press Soft Key 1 Menu and

again.

Lock Mode Setting! will be displayed.

Redialing Calls

Power Save Mode

When the phone is in an area without service for 15

minutes, it stops searching for service and enters into

Power Save Mode. When your phone activates this

feature, Power Save is displayed on the screen. The

phone automatically checks for service periodically or

you can check manually by pressing any key.

1. Press

to redial the last number in call history.

You can also redial any of the last 10 numbers

you have dialed. The last 10 numbers are stored

in the call history list. (See the Recent Call

History List on page 49.)

Adjusting the Volume

Signal Strength

The volume key on the top of left side (Side Keys) of

the phone can be used to adjust earpiece, ringer, and

key beep volumes. The upper key is used to increase

and the lower key is used to decrease the volume.

The call quality depends on the signal strength in your

area. The current signal strength is displayed on LCD in

the upper left hand corner; the more bars, the better the

signal strength. If the signal quality is poor, move to an

open area. If you are in a building, the reception may be

better near a window. For maximum reception, make

sure that the antenna is fully extended.

You may adjust the earpiece volume during a call.

To adjust the ringer volume through the main

menu. Select Soft Key 1 Menu , select Sound,

then select Ring&Vib Vol. If you adjust the ringer

to a minimum the ringer will be muted and the

LCD displays -Ringer Off-.

Emergency Dialing

You can place calls to emergency number 911 - even

The key beep volume is adjusted through Menu

feature.

if your phone is locked or restricted.

1. Press

then

1. Press and hold

(for more than 3 seconds).

If you have this feature, the phone number of the caller

will be displayed on the screen. If the screen reads,

Number is Unavailable then the caller has a call block

feature on his/her phone.

Mini Display

The small LCD on the outside of the cellcase is called

the Caller ID LCD. It displays the latest of the following

information until the cellcase is open. Once the cellcase

is opened, the main LCD displays the event status.

The name of the caller will appear on the screen

if the name and phone number of the person

calling is stored in the Personal Phone Directory

of your phone.

Caller ID LCD will display the following information:

- Time and date.

- Caller’s information. (name or number)

- Number of missed calls.

- Number of new messages.

Phone Book Features

You can store up to 198 entries in the phone book

with easy access to your most frequently dialed phone

numbers. (Entry 9 is reserved for emergency calls.)

- No service status and sleep mode.

Speed Dialing (see Dialing from Phone

Book on page 28)

Personal Phone Book Memory

Speed dialing is a convenient feature, allowing you to

make phone calls quickly and easily. Your phone

recalls the phone number from your personal directory,

displays it briefly, and then dials it.

The phone has 198 personal phone book memory

locations where you can store up to 5 phone numbers

with 32-digit capacity on each phone number. (Entry 9

is reserved for emergency calls.)

1. Enter memory location number 1 to 199, except for

9. (Entry 9 is reserved for emergency calls.)

Saving Numbers in Your Personal Phone Book

Memory locations 1 through 8 should be used for one-

touch dialing for your most frequently used phone

numbers.

2. Press

. The phone will recall the number

from memory, display it, and then dial it.

1. Enter phone number you want to save (up to 32

digits).

Caller ID

2. Press Soft Key 1Opt , then a sub-menu will appear.

You can only use this feature if your service provider

has this option available and has set up the feature on

your phone.

3. Select Save on the sub-menu.

4. The phone prompts you for the memory location

where the number will be saved. Press Soft Key

1 Next to store the number automatically in the

first available memory location. You also have

the option to enter a specific three-digit memory

location number.

7. Press Soft Key 1 View to see specifics in that

memory location, or press to place the call.

Retrieving Telephone Numbers

Retrieving Phone Numbers Using Memory Location.

Press Soft Key 2 Book on the initial display and select

Phone Book; Find Entry will be followed by an

inquiry of Entry #. Type in the Entry # of the desired

phone number.

(Entry 9 is reserved for emergency calls.)

5. Select your desired label, such as Home, Office,

Mobile, Pager, Data /Fax using

To search telephone numbers, enter specific number(s)

in the initial display and press Soft Key 1 Ok . By

selecting Find on the sub-menu, the Entry List will

appear. Information linked to the entry will appear upon

selecting a telephone number for which details are

desired.

6. Enter a name for the phone number (up to 16

characters). If you do not want to enter a name, go to

the next step.

7. Press Soft Key 1 Save . A confirmation prompt Saved!

Thanks! displays on the phone.

Retrieving Numbers

How do I add phone numbers, names, and email

address to a previously saved number in my

Personal Phone Book

Retrieving by Name Search

1. Press Soft Key 2 Book .

2. Press Phone Book.

3. Press Find Name.

1. Press Soft Key 2 Book .

2. Press Phone Book, Find Entry.

3. Enter the memory location number or press Soft Key

1 to View the entire phone book. Use the navigation

key to select entry and press Soft Key 1.

4. Enter the character(s) that you want to search

for.

5. Press Soft Key 1 Find .

4. Highlight the desired Phone Number using the

navigation key to add or edit the location then press

Soft Key 1 View .

The phone searches for names with that character

string. (Searches will ignore difference between

uppercase and lowercase letters.)

5. If you want to add the new number to the same

6. You will see a list of matches.

location, use

Home).

to highlight the label (Example

Three-Touch Dialing (Speed Dialing) This dialing

feature enables you to dial numbers in your phone

book through three keys (for locations 100 to 199).

6. Use

then select another location such as Office,

Mobile, Pager, Data/Fax, E-Mail.

7. Use

, then enter the new number or email

1) Press the first and second digits.

address for the new location.

2) Press and hold the key of the third digit.

8. Press Soft Key 1 Save .

Dialing from a Memory List

Dialing from Phone Book

1) From a memory list, press the scroll keys to go to the

memory location you want.

You can place a call from any memory location either

by speed dialing or by pressing

the memory location.

while looking up

2) Press

Dialing from a Memory Location

One-Touch Dialing One-touch dialing is a convenient

feature which enables you to dial frequently used

numbers in your personal Phone Book by pressing a

key (for memory locations 1 through 8).

On viewing and checking the memory location to

call, press

Advanced Phone Book Features

For locations 1 to 8, you can use one-touch dialing (if

enabled, see One-Touch on page 39) by pressing and

holding down the key corresponding to the memory

location. (Entry 9 is reserved for emergency calls.)

You can edit existing phone numbers and add the

appropriate suffix. (For instance, calling an automated

answering machine or placing credit card calls.)

Enter the phone number and press Soft Key 1 Opt .

Then select from the following using

Press the corresponding key to the memory location,

then press

For Hard Pause (H)

The phone pauses until you press Soft Key 1

Resume to send the next number.

Two-Touch Dialing (Speed Dialing) This dialing

feature enables you to dial numbers in your phone

book through two keys (for locations 10 to 99).

For Time Pause (T)

The phone will pause for 2 seconds before sending

the next set of numbers.

1) Press the first digit.

2) Press and hold the key of the second digit.

Most automated answering machines require

several timed pauses.

1) Press the first and second digits, then press

1. After you choose the type of pause, enter the

additional number(s) (e.g., your pin number or credit

card number.)

2. Select Soft Key 1 Opt . Then press Save to save this

number with pauses.

Adding an Area Code to a Number from the Call

History Log

Prepend can be used to add an area code to a phone

number in your call history log. To add the number and

make a call, select Soft Key 2 Book , press 1 for Call

History, select the phone number to be prepended,

press Soft Key 1 to select Opt , select View, type in the

area code and press send.

3. The phone prompts you for the memory location where

the number will be saved. Press Soft Key 1 Next to

automatically store the number in the first available

memory location. You also have the option to enter a

specific three-digit memory location number.

You cannot save the phone number from the

prepend stage. However, once you have made

your call, you can go to Call History and save

the number; the area code will be attached.

(Entry 9 is reserved for emergency calls.)

4. Select your desired label type, such as Home, Office,

Mobile, Pager, Data /Fax using

5. Enter a name for the phone number (up to 16

characters). If you do not want to enter a name, go to

the next step.

6. Press Save. A confirmation prompt Saved! Thanks!

displays on the phone.

(

)

Ring Type Menu

Select one of four ring types (Ring, Vibrate, Vib+ Ring,

and Lamp) with , or

Chapter 3. Menu Features

General Guidelines to MENU

Access and Settings

(

)

Ring & Vibrate Volume Menu

1. Press Soft Key 1Menu . The three menu items will

appear on the display screen.

Adjust the volume of the ringer using

, or

2. Press

features.

, or

to go through the list of menu

When lamp is selected, the message Ring Type is Not

Adjustable is displayed on the screen.

3. Press the corresponding number to the menu item

you want to select. Then the sub-menu list will

appear on the screen.

Ringer Off on the screen

1. Press Soft Key 1 Menu , then press number

Sound.

4. Press the appropriate key to select the sub-menu

you want to access.

2. Press number

Ring & Vib Vol. Increase

the volume of the ringer using the

3. Press Soft Key 1 Ok .

button.

5. Select preferred settings, using

Press Soft Key 2 Back to go one step backward

while accessing menu or selecting settings.

, or

Also make sure the Ring Type (Menu

) has not been set to Lamp.

then

6. Press Soft Key 1Ok to save the settings or Soft

Key 2 Back to cancel without saving.

(

)

Key Tone Menu

Set Key Tone length and touch tone playback speed.

(

)

Sound Menu

Normal: Sends out a tone for a fixed period of

time.

(

)

Ring Sound Menu

Long: Sends out a continuous tone for as long

as you keep the key pressed.

Press Soft Key 1 Menu . Press

Sound, then select

, or until you

Ring Sound. Press

Use the volume buttons on the side of the phone

to increase and decrease the volume.

find the sound you desire. Then press Soft Key 1 Ok to

save the ring sound.

(

)

3. Service Menu

Dual-Tone Multi Frequency (DTMF). Signaling by

the simultaneous transmission of two tones, one

from a group of low frequencies and another

from a group of high frequencies. Each group of

frequencies consists of four frequencies. Setting

Key Beep length to Long will extend the DTMF

If on, alerts you when service changes.

When you enter a service area, the phone displays

Entering Service Area message.

When you leave a service area, the phone displays

Leaving Service Area message.

tone. Press MENU, then

and press

(

)

4. Call Connect Menu

Using

select Long. Press Soft Key 1 Ok .

Alert tone notifies the user of the time when the call

is connected.

(

)

Key Volume Menu

Adjust the key beep volume (made when pressing the

key).

Display (Menu

)

(

)

Earpiece Volume Menu

(

)

Backlight Menu

Adjust the earpiece volume during a call by pressing

the Side Keys.

Choose the settings of the LCD and keypad backlight.

10 seconds turns the backlight off 10 seconds after the

last key was pressed. 30 seconds turns the backlight

off 30 seconds after the last key was pressed. On

When Cellcase open means that the backlight is

always on while cellcase is open. Always off means

that the backlight is never on.

(

)

Alerts Menu

One of the four Alert options could be turned on.

Press Soft Key 1 Menu . Press

Sound. Press

Alerts.

Check each option and turn it off if desired.

(

)

(

)

Banner Menu

1. Fade Menu

Set an alert to inform you when you have lost a call or

lose services.

Press Soft Key 1 Menu .

Then press

Display. Press

Banner. Press Soft

Key 1 Opt . Select Edit. Then enter the string of characters

you want to be displayed (up to 16 characters). Then press

Soft Key 1 Save .

(

)

2. Minute Menu

Alerts you 10 seconds before the end of every minute

during a call.

(

)

Theme Menu

(

)

Auto NAM Menu

You can set up the screen displayed on the LCD screen

in standby mode. (Default, Star theme)

Allows the phone to automatically switch to one of the

programmed telephone numbers if it is operating in

the corresponding service provider area.

(

)

Language Menu

(

)

Force Call Menu

Set the Multi-language feature to your language

preference.

Makes next call in analog mode. You have 30 seconds

to place an analog call. This feature is typically used for

data applications.

1. Press Soft Key 1 Menu .

Then

Display.

2. Press

Language.

(

)

Serving System Menu

Select the language then press Soft Key 1 Ok .

(English/Spanish)

You can identify the channel number of the system

which is served and SID Number.

(

)

Version Menu

This information is only for technical support.

View the software and PRL version.

Features (Menu

)

(

)

Data/Fax Menu

System (Menu

)

In Data/Fax setting, data and faxes can be transmitted.

(

)

System Select Menu

Wireless data communication services refer to utilization

of subscriber terminals for access to Internet with

personal computer or laptops at 8 Kbps or at maximum

of 13 Kbps.

Choose setting to control which cellular company your

phone uses. Leave this setting as default unless you

want to alter the system selection (as instructed by your

service provider).

Select Menu, then press

Features and then

Home is B (Automatic_B, Automatic_A, Home only)

is displayed.

Data/Fax.

Your service provider needs to activate your Data

Mode to be able to use the Data/Fax option. (Requires

Data Connection Kit)

(

)

Set NAM Menu

Select the phone’s NAM (Number Assignment Module)

if the phone is registered with multiple service providers.

Data In: This setting enables the subscriber terminal

to receive data calls.

Fax In: This setting enables the subscriber terminal to

receive fax transmittals.

The Data Connection Kit-your wireless connection

to the Internet and other dial-up networking

functions. This Kit lets you connect your PC,

Windows CE, or Palm OS device to your LG

wireless phone freeing you from having to locate a

telephone outlet. You can send or receive an e-

mail, a fax, or access the Internet any time, any

where.

(

)

One-Touch Menu

Enable/Disable one-touch dialing.

(

)

Voice Privacy Menu

Set the voice privacy feature for CDMA calls as Enhanced

or Standard CDMA offers inherent voice privacy. Check

with your service provider for availability of the enhanced

voice privacy mode.

(

)

Auto Answer Menu

Select the ring type before the phone automatically

answers a call. This feature is most commonly used with

the hands-free kit.

(

)

Audio AGC

Enable/Disable the function of Audio AGC system.

This feature provides a better audio experience by

enabling the Audio Gain Control (AGC) system to control

the dynamic range and volume of the sending and

receiving voice across different levels of speaker and

environments.

To enable / disable this function, Press Soft Key 1

Menu, then press

Press Soft Key 1 Menu .

Then press

Features. Press

Auto Answer.

Select an option and press Soft Key 1 Ok .

Off

after 1 ring (or melody 5 seconds)

after 3 rings (or melody 10 seconds)

MACHINE Enable

Features then press

Audio

AGC.

When you have an incoming call, the phone automatically

responds with a pre-recorded voice message and records

the caller's message after 3 rings.

(

)

Utility ^Menu

(

)

Country Code Menu

Auto Answer only works when the cellcase is

open.

You can search for the national code of all countries in

the world. (total 123 countries)

(

)

Auto Retry Menu

(

)

Calculator Menu

Set the length of time the phone waits before automatically

redialing a number when the attempted call fails.

You can calculate simple mathematics.

(To the second decimal place)

off / every 10 seconds / every 30 seconds / every 60

seconds

For example: 25 100=2500

the call restriction to Yes or No (using

). Press Soft

1) Press

2) Select

3) Press

4) Select

and

(multiplication) using

, and , in order.

using Soft Key 1.

in order.

Key 1 Ok .

If you set it to Yes you can only place calls to emergency

numbers and phone numbers stored in the memory

locations.

Then you will see the result of the calculation, 2500.

You can still receive calls in the restrict mode.

(

)

Clear Call

(

)

Security Menu

Allows you to delete all the telephone numbers saved

in the Call History.

Press Soft Key 1 Menu and select

your default lock code (last four digits of mobile phone

number or 0000). Select New Lock Code. Enter the

Security. Enter

Press Soft Key 1 Menu . Press

Security. Then

new four-digit lock code of your choice. For confirmation,

the phone will prompt you to enter the New Lock Code

again.

enter the four-digit lock code. Press

Clear Call.

Select Yes using

. then press Soft Key 1 Ok .

(

)

Clear Data Menu

(

)

Lock Mode

Deletes all information saved in memory locations (001-

199), schedule and message. (Entry 9 is reserved for

emergency calls.) Be careful since any deleted information

is not recoverable.

Helps you to protect your phone from unauthorized use

and once the phone is locked, the phone is restricted

from making most calls until the lock code is entered.

You can still receive phone calls and make emergency

calls while your phone is locked. Never means that the

phone is never locked. When locked, you can only

make emergency calls or receive incoming calls. On

power up means that the phone is locked when it is

turned on. Always means that the phone is always

locked.

(

)

Emergency # Menu

Allows you to enter 3 emergency numbers (Edit

enter number Save ). You can call these

numbers and 911 even when the phone is locked or

restricted.

(

)

New Lock Code Menu

New Lock Code allows you to enter a new four-digit lock

code number. For confirmation, it will ask you to enter

the new lock code twice. This is the same number as

the pin code.

(

)

Restrict

Press Soft Key 1 Menu . Press

four-digit lock code. Then press

Security. Enter the

Restrict. Then set

To record a message:

(

)

Voice Service Menu

1. Press Soft Key 1 Menu , then press

Voice Service.

Allows you to use two voice-activated functions or

record conversations. By saying a programmed word,

you can make a call from your personal phone book.

When you have an incoming call, you can say a

programmed word to answer the call or send it directly

to your answering machine. Voice Service also enables

you to record phone conversations.

2. Press

Voice Memo, Record.

3. Press Ok to record voice and follow voice prompts.

4. Press any key to stop your recording.

To Play a Voice Memo:

1. Press Soft Key 1 Menu , then press

2. Press Voice Memo, Playback.

The most recent voicemail appears on the top.

Voice Service.

- Voice Dialing

You can make a call by simply saying the programmed

word.

(Example: 01:17:00 000.1 V Voice or R Recorded.)

- Voice Recording

3. Select Opt then Replay.

You can recorde conversations over the phone.

- Voice Memo

From the main menu you can also hold down

until you get to playback Record.

Allows you to leave yourself a voice message.

- Auto Answering Machine (Voicemail)

(

)

Training Menu

Allows you to set your phone to direct incoming calls

to voicemail.

Voice Command allows you to answer or send the

call to the answering machine.

To set up Voice Command:

(

)

Voice Memo Menu

There are 2 options, playback or record. In playback

mode, you will have a list of recorded messages and

1. Press

Voice Service, then

Training.

2. Practice the voice command (Yes/No).

you can hear all recorded messages by pressing

3. When you receive a call, you say Yes, the call is

connected and say No the bell rings continuously.

This option is available only when phone is connected

to the hands-free kit.

Saving Phone Numbers With Voice Dialing

Voice Service uses the pre-programmed message

and the caller can leave the message in voicemail

when you are not available to answer the phone.

You can play back the message later.

1. Enter the phone number that you want to save (up

to 32 digits).

2. Press Soft Key 1 Opt , then a sub-menu will appear.

To activate this option:

3. Select Save on the sub-menu.

1. Press Soft Key 1 Menu. Then press

2. Press Auto Answer then use

Answer Machine.

3. Press Soft Key 1 Ok .

Features.

4. The phone prompts you for the memory location

where the number will be saved. Press Soft Key 1

Next to automatically store the number in the first

available memory location. You also have the option

to enter a specific three-digit memory location

number. (Entry 9 is reserved for emergency calls.)

and select

(

)

Undo Train Menu

5. Select your desired label type, such as Home,

Allows you to delete the recorded voice command from

the practice.

Office, Mobile, Pager, or Data/Fax using

6. Enter a name for the phone number (up to 16 characters).

If you do not want to enter a name, go to the next step.

(

)

Voice Setup Menu

There are three options (Manual, Auto, and Disable)

for Voice Dialing. On manual mode, press to

7. If you want the number with Voice Dialing, use

to highlight No Voice. Use

then select Voice

start this feature. On auto mode, this feature will be

available upon opening the cellcase. In Disable mode,

voice dialing is disabled when you press

disabled message will be displayed on the screen.

press Soft Key 1 Save .

8. Press Soft Key 1 Ok to enter Voice Training.

9. A prompt will announce Name Please. Say the

name and label associated with the phone number.

10. A second prompt is given. Again repeat the name

and label associated with the phone number. A

confirmation prompt is given Added, then Saved

successfully displays on the phone.

(You may store up to 20 phone numbers with Voice

Dialing.)

Adding the Voice Dialing Feature on a Previously

Saved Number

Using the Voice Dialing Feature When Making a

Call

1. Press Soft Key 1 Menu, then press number

Voice

1. Press Soft Key 1 Book .

Service.

2. Press Phone Book, Find Entry.

2. Press number

3. Use then select one of the three options (Manual,

Auto, and Disable) for Voice Dialing.

Voice Set up.

3. Phone will prompt you to select an entry by displaying

Enter Entry # on the display screen.

4. Enter the entry. If you press Soft Key 1 Ok without

selecting any entry, you may view the entire list saved

in your phone book.

On Manual Mode, press

to start this feature.

On Auto Mode, this feature will be available upon

5. Highlight the desired Phone Number using

opening the cellcase.

add the Voice Dialing feature and then press Soft

Key 1 View .

On Disable Mode, Voice Dialing is disabled when you

press

, the message will be displayed on the

6. If you want the number with Voice dialing, use

screen.

to highlight No Voice. Use the

then select Voice

To record the voice command, Press

while in

press Soft Key 1 Save .

the hands-free kit and record the voice command

as per your preference.

7. Press Soft Key 1 Ok to enter Voice Training.

8. A prompt will announce Name Please, say the name

When you hear Incoming call answer? in hands-

free kit, if the user says yes the call is connected,

say no the bell rings.

and label associated with the phone number.

9. A second prompt is given. Again, repeat the name

and label associated with the phone number. A

confirmation prompt is given Added then Saved

successfully displays on the phone (You may store

up to 20 phone numbers with Voice Dialing.)

Browser Start (

)

Press and hold down

or press Soft Key 1 Menu .

Then press

Browser Start.

See Chapter 7, MiniBrowser on page 65~71.

( Book

)

3. Roam Calls

Chapter 4. Book Features

Allows you to keep a running count of the time you

spend making calls in non-service area. To reset the

call timer, press Soft Key 1 Opt , and then select Soft

Call History (Book

)

Allows you to view the 30 most recently dialed phone

numbers. Once you exceed the 30-number storage

limit, the oldest call history record is overwritten. These

calls are divided into 3 types of calls.

Key 1 Sel after selecting Zero using

( Book

)

4. All Calls

Allows you to keep a running count of the time you

spend making all calls either in your service area or in

non-service area. Resetting the call timer is not possible.

Outgoing (Book

)

Allows you to view list of the last 10 outgoing calls you

made. From the list you may place a call by pressing

Recent Call History List

Allows you to view the 30 most recent phone numbers.

Speed dialing for the phone numbers in Call History is

available.

Incoming (Book

Allows you to view list of the last 10 incoming calls.

From the list you may place a call by pressing

)

1. Press Soft Key 2 Book .

2. Press Call History.

Missed (Book

)

Allows you to view list of the last 10 missed calls. From

3. Example: Press Outgoing.

the list you may place a call to these numbers by pressing

4. Press

, or

to scroll through the last ten

calls and scroll to the number you want to call.

Call Information (Book

)

5. Press

to place a call or choose View of Soft

Key 1 Opt to see the details of the call. Press

Soft Key 1 Opt and select Save to save the

number in a memory location. (If you need further

information, please refer to pages 25~26.)

( Book

)

1. Last Call

Displays the time of last call made.

( Book

)

2. Home Calls

Allows you to keep a running count of the time you

spend making calls in your service area since last reset.

To reset the call timer, press Soft Key 1Opt , then select

Soft Key 1 Sel after selecting Zero using

(Book

)

Phone Book

Add Entry (Book

)

You can save telephone numbers, pager numbers,

and so on, up to 198 entries (Entry 9 is reserved for

emergency calls.)

Find Entry (Book

)

1. Press Soft Key 2 Book .

2. Press Phone Book, Find Entry.

1. Press Soft Key 2 Book .

3. Your phone will prompt you to enter an entry

number.

2. Press Phone Book, Add Entry.

3. Enter the phone number, then press Soft Key 1

Next .

4. Enter an entry number. If you press Soft Key 1 Ok

without selecting an entry, you may view the entire

list saved in your phone book.

4. Select the memory location number.

5. Select the desired phone label using

6. Enter Name.

While you are viewing an entry, you may move to

another entry by pressing Up/Down(

)key. If

To enter an E-mail address, select E-mail from

you press Soft Key 1 Opt , you can save or erase.

label, press

addresses.

to move to the available E-mail

Find Name (Book

1. Press Soft Key 2 Book .

)

7. You may select the desired ID ring type, secret,

and voice recognition option using

2. Press number

Phone Book. Press number

8. Press Soft Key 1 Save when you are done.

Phone Type

Find Name.

3. Enter the letter(s) that you want to search for. (At

least three letters are required for a quick search.)

Then press Soft Key 1 Find . You will see a list of

matching names displayed on the screen. If the

name is found, the name will be displayed and if

the name is not found, Not Found message will

appear.

Home

Office

Mobile

Pager

Entry of Home Phone Number

Entry of Office Phone Number

Entry of Mobile Phone Number

Entry of Pager Number

Data/Fax Entry of Data/Fax Number

E-Mail Entry of E-mail Address

On Find Name menu, you can change mode by

pressing

(T9En -> Eng -> 123 -> Spc -> T9HLP)

Scheduler Item Descriptions

Find E-mail (Book

)

1. Press Soft Key 2 Book .

(Book

Scheduler

2. Press Phone Book, Find E-mail.

Current date/year is displayed.

3. Enter the E-mail address you want to search for

and press Soft Key 1 Find . If the E-mail address

is found, the E-mail address will be displayed and

if the E-mail address is not found, Not Found

message will appear.

After selecting the required date, press Soft Key 1.

The selected schedule of date/year will appear on

the display screen (this function is available on Add

Event and View Daily menu only).

Date/Time Edit - Time display is a 24-hour clock

setting (i.e., 6:30am = 06:30, 1:30pm = 13:30)

Select the item you want to view using

4. After selecting the E-mail address to edit from E-mail

list, press Soft Key 1 View , and the phone book

entry will be displayed.

Using

, select the day.

Press Soft Key 1 (above the

key,) then select

Add Event. Change to the desired schedule time and

press Soft Key 1 Ok . Type the description, then press

Soft Key 1 Opt then Save.

5. After selecting E-mail label, press

the available entry to edit or delete.

to move to

6. To save, press Soft Key 1 Save .

This option is available in digital areas only. If you

are in an analog area, you will get an error

message No Time Info Is Available while you are

attempting to set up a schedule.

To delete E-mail address: Move to the phone

book from either Find E-mail or Find Entry and

after selecting the E-mail label, press

move to the memory location, press and hold

for a while to delete E-mail address and

press Soft Key 1 Save to confirm.

( Book

(Soft Key 1)

)

Add Event

Date/Time Edit.

After editing the date and time, press Soft Key 1

Ok .

Scheduler

Enter items for Scheduler.

Scheduler helps you to create and manage your agenda.

Your schedule is stored by date and your phone lets you

know when an agenda item comes due. You may also

take advantage of the Scheduler Wake up function.

Select Save in Soft Key 1 Opt .

This option is available in digital areas only. If you

are in an analog area, you will get an error message

Sys-Time Error Don’t Set Alert Time while you are

attempting to set up an Alarm.

( Book

(Soft Key 1)

)

View Daily

All events of the selected date are displayed.

You may select either Edit or Erase.

( Book

(Soft Key 1)

)

( Book

Set Alarm

)

View All

All stored entries are displayed.

You may select either Edit or Erase.

Current time is displayed upon entering menu.

Set time for alarm and press Soft Key 1 Save .

At alarm time Wake Up is displayed and an alarm

will sound.

( Book

(Soft Key 1)

)

Erase All

To delete information, scroll to Yes and press Soft

Ringing (or vibration) will stop when any key is

pressed or cellcase is opened.

Key 1 Ok .

All items in Schedule will be deleted.

Ring volume is controlled according to the setting

in reception mode. However, ringing (or vibration)

will not be heard when reception mode is set to

Lamp.

( Book

(Soft Key 1)

)

Erase Old

To delete information, scroll to Yes and press Soft

Key 1 Ok .

Set Alarm-Time display is a 24-hour clock setting

(i.e., 6:30am = 06:30, 1:30pm = 13:30).

Past Scheduler items are deleted.

( Book

)

Erase Alarm

( Book

)

Wake Up

Alarm will be deleted.

1. Press Soft Key 2 Book , then

Wake up.

2. Press Set Alarm, then set time for alarm.

(

)

My Phone# Book

3. Press Soft Key 1 Save .

To view your phone number:

This option does not work if your Ring Type (Menu

Press Soft Key 2 Book and then press number

My Phone#. The number will be displayed on the

screen.

Sound, then

Ring Type) has been set to Lamp.

New Message Alert

Chapter 5. Message Features

Text message, page, and voicemail box become available

There are four ways your phone alerts you of new

messages.

as soon as the power is on. You can access these types

1. The phone displays the message on the screen.

2. One of four types is heard (if selected.)

3. The red light blinks.

of messages using the Message Key

. In addition, you

can make a call to the callback number by pressing

during a message check.

4. The message icon is displayed on the display screen

. In the case of an urgent message, the icon will

flash and an asterisk mark will be displayed on both

sides of the message.

The phone can store up to 30 messages (One voice

message, 29 text messages.) with 245 characters per

message. Your service provider may not provide the above

features.

Character limits: The LG-TM510 supports up to 245

characters per message including header information. Limits

to available characters per message may exist, please check

with your service provider for system capabilities.

If you receive the same message twice, your

phone deletes the older one and the new one

is stored as DUPLICATE.

The message information stored is determined by phone

mode and service capability. You can check types of

(

)

Voice

messages by pressing the Message Key

Allows others to view the voice messages recorded in

the voicemail box.

Types of Menu

If the callback number is available, press

a call to the callback number.

, to place

Voice: Shows the number of messages in voicemail.

Send Msg

New Text: Newly received text messages.

Old Text: Opened but not erased text messages.

Outbox: Informs the status of the saved message.

Erase Msgs: Deletes all stored messages.

Setting: Selects alert type for new message(s).

Browser Msg

Checking of Voicemail Box

1. Press

2. Select

3. Press

(

Voice.

(If the callback number is available)

Browser Set

Canned Allows you to record up to 10 of the most

Out of Memory Warning

frequently used words.

No more messages can be received until enough memory

space becomes available.

10 texts: Yes, No, Call me, Need directions, Where

are you?, Will call later, Busy, On my way, Will arrive

15 minutes, Thank you.

At this time, the message NOT ENOUGH MEMORY will

be displayed on the display screen and New Message is

rejected

Send

CB#

Used to send the message.

Used to enter the callback number.

(

)

Send Message

Priority Allows you to designate message priority,

Normal or Urgent.

Send To: This feature has a multiple address send

function, up to 10 different addresses.

Deferred Allows you to delay sending the message

until the programmed time frame.

There are four optional menus of Continue, Next Address,

Previous Address, and Phone Book.

Delaying time frame is as follows: Immediate, After 30

min., After 1 hour, After 2 hours, After 12 hours, After 1

day, and After 2 days.

Continue

Used to save the current address.

Allows you to enter the next sending

address.

Next address

Validity: Indicates the validity of the message delivered

to the Short Message Center (SMC) without being

transmitted to the sending address for certain period of

time. Those messages will be deleted within the

programmed time frame. Validity time frame is as

follows: 30 minutes, 1 hour, 2 hours, 12 hours, 1 day, 2

days, and Continue.

Previous address Allows you to enter the previous

sending address.

Phone book

Allows you to refer to the address in

your phone book.

Msg: Allows you to enter the transmitted message.

Delivery ACK: Allows you to be certain the message

transmission has gone through.

There are four available optional menus of Send, Save,

Option, and Canned.

When all fields are entered, press

message.

to send the

Send

Save

Used to send the message.

If you press

without a sending address, a warning

Used to save sending address, callback

number, user data, current time.

message is displayed on the display screen. When the

message has gone through, a confirmission message

is displayed on the screen. If the message has not

Option Send, CB#, Priority, Deferred, Validity,

Delivery ACK are available options.

Protect? Protects a message even when all the other

messages are deleted. There are two options of

disable and enable. When you select (protect?,) an

will be displayed in front of each message.

gone through, the MSG not Delivered will be displayed

with one of the five failure reasons (Network Problem,

Not available, Invalid address, MSG too long, Not

support, or MSG failed).

Auto Delete Function: If maximum storage capacity

is reached, old messages will be deleted when you

receive a new message. Messages that have been

protected will not be deleted.

(

)

New Text

Reading Newly Received Text Messages

The latest message will be automatically displayed on

the screen. To scroll through the received messages,

(

)

Old Text

1. Press

use the

After reviewing a message, you can go to the next new

message by pressing

(

2. Select

Old Text.

1) Lists messages opened but not deleted by user.

If you press Soft Key 1 Opt , then you can see 5 sub-

menus:

2) The saved messages displayed on the screen

can be selected by pressing

Reply This function sends a reply to the SMS originating

address or E-mail address. If the SMS has both originating

address and E-mail address, the reply will be sent to the E-

mail address only.

(

)

Outbox

Displays the status of the messages recorded in the

Forward Allows you to forward a message to a different

voicemail box.

address or number.

Status

: Save

Erase Deletes a message.

Save addr. Shows the phone number, E-mail list on

the LCD. You can save the phone number on the list

into phone book by pressing Soft Key 1 Save . If you

: Send - Messages saved in Short Message Center

(SMC) have been transmitted.

: Fail

want to place a call to the number, press

: Delivery - Message has been delivered.

You can see up to five E-mail addresses. The address

with @ is considered an E-mail address. On E-mail, if

you press Soft Key 1 Opt , you can save the E-mail

address into new or old entry.

Cancel - Allows you to cancel sending a message.

: Multi - Sending address.

Option menu is available. Option menu includes View,

Erase, and Cancel.

Resend: Allows you to retransmit the selected message.

(

)

Setting

View: Shows the message saved currently.

There are many ways your phone alerts you of a new

voicemail message:

The view menu has three sub-menus of Resend, Open,

and Erase.

By displaying a message on the screen.

By sounding a beep or vibration.

By flashing a lamp.

Resend Allows you to retransmit the selected message.

Open

Used to copy the saved message.

Erase Used to delete the recorded message.

Cancel Used when the message has not gone

through for some reason. If you press Soft Key 1 Save,

the message you tried to transmit is erased.

Alert (

)

Allows you to select the alert type for a new message.

Alert types are 2 Alerts, 4 Alerts, Lamp, and Vibrate.

2Min Alert (

)

(

)

Erase Message

User may select 2-min alert for reminder in case a new

message(s) is not opened.

All the voicemail box messages, text messages, and

pages are deleted when you select 6. Erase Message

from the Message Menu screen. Protected messages

will not be erased.

Default CB# (

)

Enables its own phone number to be verified on call back

menu.

Erase Inbox (

)

Auto Save (

)

Deletes all unprotected records in the inbox.

Setting menu to save sent messages in the outbox

automatically.

Erase Outbox (

)

Allows you to delete all the information saved in the

outbox.

Auto Delete (

)

Setting menu to delete the messages automatically

when you exceed storage limit.

Erase All (

)

Allows you to delete all the information saved in the

outbox and inbox.

(

)

(

)

Browser Msg.

Browser Set

See Chapter 7. MiniBrowser on pages 65~71.

Chapter 6. Functions Used During a Call

(During a call: Menu

)

Mute

Sometimes it is necessary to mute a call so that the

caller does not hear you or certain background

noise. To use this function during a call, press Soft

Key 1 Menu and

To cancel mute, press Soft Key 1 Menu and

again.

(During a call: Menu

)

Memo

Provides a place to take notes. You can use it like a

piece of paper to take a note during a meeting.

(During a call: Menu

)

Recording

Allows you to record the conversation over the phone

by pressing . This operation toggles between

Enable and Disable.

(During a call: Menu

)

Key Tone

Set key beep length and touch tone playback speed.

Normal Sends out a tone for a fixed duration, no

matter how long you press the key.

Long Sends out a continuous tone, as long as

you keep the key pressed.

(During a call: Menu

)

Voice Privacy

Set the voice privacy feature for CDMA calls as

Enhanced or Standard:

CDMA offers inherent voice privacy. Check with your

service provider for availability of the enhanced voice

privacy mode.

Chapter 7. MiniBrowser

The MiniBrowser feature allows you to view Internet

content specially designed for the mobile phone interface.

Access and selections within this feature are service

provider dependent.

For specific information on MiniBrowser access through

your phone, refer to your service provider.

Overview

The MiniBrowser allows the user to use a variety of

Internet services. Using the MiniBrowser on the phone

allows you to:

Send and receive E-mail.

Browse and search the World Wide Web via web

pages specially designed for cellular customers.

Set bookmarks to directly access your favorite sites.

Retrieve information such as stock quotes and flight

schedules from the Internet.

Quality of Browser

Browsing the web via the phone is not like using your

home computer. Site providers have selected only the

critical aspects of their site to present to wireless phone

users and have removed most graphics.

Billing

Each time you start the MiniBrowser, the phone will

connect to the Nationwide Network as necessary, the

phone icon (In Use Icon) will appear on the display

screen, and you will be billed accordingly. Rates will

vary according to your billing plan.

Navigating through the Browser

Each time you start the MiniBrowser you will view a

reminder that you will be billed for the connection time.

If you wish to disable this reminder, follow the steps

below:

While using the MiniBrowser, you will find that on screen

items may be presented in one of the following ways:

numbered options (some options may not be

numbered).

1. Message Menu

Prompt

Browser Set

links (embedded in content).

text or numeric input.

simple text.

2. Disable the reminder by selecting None using

You can act on the options or the links by making use

of Soft Keys. The Soft Keys are just below the display

screen.

Accessing the MiniBrowser

You can access the MiniBrowser by pressing and

holding

item from Main Menu screen.

in the initial screen or by selecting the

Navigator Keys

Scrolling Up/Down by Item

Start MiniBrowser ( Menu

)

You can use your

to scroll through the content if the

1) From the Main Menu, highlight 8. Browser Start

current page does not fit into one screen. The currently

selected item is indicated by a cursor on the screen,

and press Soft Key 1Sel .

2) A reminder of the charge will appear; press Soft

Key 1Yes to launch the MiniBrowser if required.

and the

will also move the cursor.

Fast Scrolling Up/Down

3) After a few seconds, you will see the Home Page.

By pressing and holding

through the menus.

the cursor will scroll quickly

Ending a MiniBrowser Session

You can end a MiniBrowser session by pressing

Scrolling Up/Down by Page

If the prompt To end or Both option is set in the

MiniBrowser Setup, you will be prompted whether you

want to end the browser call. (Message Menu

Press Side Keys to move screen page up and down.

Go to Home Page

Browser Set

Ending Browser calls - Users should be able to end a

browser session by pressing

Prompt

To go back to the Home Page, press and hold

Soft Key 2

View Browser Menu

The Soft Key 2 is used primarily for secondary options

or a menu of secondary options.

Press and hold

MiniBrowser is being used.

to use browser menu when the

Entering Text, Numbers, or Symbols

Clearing out text/number entered

When entering text or numbers, press

When you are prompted to enter text, the current text

entry method will appear under the Soft Key 2 as Alpha,

Smart, Number, or Symbol. (exact label depends on

implementation)

to clear the

last number, letter, or symbol. Press and hold

completely clear the input field.

Selecting and activating items using Soft Keys and/ or

digits

To change the input mode, use Soft Key 2.

To enter an uppercase character, in Alpha or Smart

If the items on a page are numbered, you can use

mode only, press

wish to capitalize.

before selecting the letter you

your keypad (number) keys or

to select an item, or

you can select the items by moving the cursor and

selecting the appropriate Soft Keys.

Initiating a phone call from the MiniBrowser

You may initiate a phone call from the MiniBrowser if

the site you are using supports the feature, (the phone

number may be highlighted and Soft Key 1 will appear

as Call).

Soft Keys

To navigate to different screens or select special

functions, use the Soft Keys. Soft Keys are just below

the display screen. Note that the function associated with

the Soft Keys can change on each page and depends

on each highlighted item.

The browser connection will be terminated when you

initiate the call. After you end the call, your phone will

return to the screen from which you initiated the call.

Soft Key 1

Using Bookmarks

The Soft Key 1 is used primarily for first options or selecting

item but its function may change, depending on the content

displayed.

You can bookmark many individual pages for easy

access at a later time. Bookmarks save you time by

reducing the number of steps it takes to access a desired

page.

To create a bookmark:

Browser Setting (Message Menu

-> Browser Set

)

Go to the page that you want to mark. On the browser

Type of Browser Setting Menu.

menu, select Mark Site or press and hold

Prompt: A prompt will display on the LCD just prior to

launching the browser; this is to inform the user that this

call will incur a usage charge. This step is used to

prevent accidental activation of the browser since all

subscribers will be provided with browser capabilities

automatically.

If the page has a title, it will be automatically used for the

name of the bookmark. When the bookmark is saved

you can change the bookmark name if you want.

Selecting Save will save the name and add the page to

your list of bookmarks.

A message will appear confirming that the bookmark

was added to the list. Select Soft Key 1Ok to return to

the screen that you marked to resume navigation

within the MiniBrowser.

A message is also available to inform the users whether

or not they want to exit the browser after they press

. Users can disable the extra step (or enable if it is

disabled) through a menu option. (To end, None, To start,

and Both.)

The new bookmark is added to the bottom of your

bookmark list.

Alert Sound: There are 3 types of beeps that the user

can assign to a browser message alert; 2 Beeps, 4

Beeps, or Mute.

Finding a Bookmark

From the Home Page or press and hold

the bookmark you want.

, then select

From the Home Page, press and hold the number

associated with the bookmark in the bookmark list.

Browser Message (Message Menu

)

-> Browser Msg

This will display any browser messages or alerts.

Hands-Free Car Kit (Portable)

Chapter 8. Accessories

There are a variety of accessories available for the

phone. You can select these options according to your

personal communication requirements. Consult your

local dealer for availability.

The hands-free car kit, model PHF-30W,

enables you to attach the phone to the car

providing you with hands-free operation. It

will also charge a completely discharged

battery in 5 hours.

Travel Charger

Hands-Free Car kit (Installed)

This charger, model TC-10W, allows you to

charge the battery. It supports standard

U.S. 120 Volt 60 Hz outlets. An orange light

indicates that it is charging, a green light

indicates charging is complete. It takes 5

hours to charge a completely discharged

battery.

The installed hands-free car kit, model IHF-51W, is

permanently installed in your car, and provides you with

hands-free operation. It will also charge a completely

discharged battery as shown.

Battery (LGLi-AAEM)

Standard battery and Extended battery

are available.

Data Cable Kit

Standard

battery

Extended

battery

Connects your phone to your PC. (Model

KW- )

Desktop Charger

The desktop charger, model DC-41W,

allows you to place the phone in the

stand for charging. It can charge a

completely discharged battery in 3

hours.

Headset

Connects to your phone, allowing hands-

free operation. Includes earpiece,

microphone, and mute key.

Cigarette Lighter Charger

(Model Headset 1000)

You can operate the phone and trickle

charge the phone’s battery from your

vehicle by using the cigarette lighter

charger, model CLC-11W. It takes 5 hours

to charge a completely discharged

battery.

Hand strap

AC Adaptor

Holster

Chapter 9. Appendix

Menu Tree

Chapter 10. Safety Guidelines

Safety Information

Exposure to Radio Frequency Signal

Your wireless handheld portable telephone is a low power radio

transmitter and receiver. When it is ON, it receives and also sends

out radio frequency (RF) signals.

European and international agencies have set standards and

recommendations for the protection of public exposure to RF

electromagnetic energy.

International Commission on Non-Ionizing Radiation Protection

(ICNIRP) 1996

Verband Deutscher Elektrotechnik (VDE) DIN-0848

Directives of the European Community, Directorate General V in

Matters of Radio Frequency Electromagnetic Energy

National Radiological Protection Board of the United Kingdom,

GS 11, 1988

American National Standards Institute (ANSI) IEEE C95.1-1992

National Council on Radiation Protection and Measurements

(NCRP), Report 86

Department of Health and Welfare Canada, Safety Code 6

Those standards were based on comprehensive and periodic

evaluations of the relevant scientific literature. Over 120 scientists,

engineers, and physicians from universities, government health

agencies, and industry reviewed the available body of research to

develop the ANSI Standard (C95.1).

The design of your phone complies with these standards when used

normally. Use only the supplied or an approved replacement

antenna. Unauthorized antennas, modifications, or attachments

could damage the phone and may violate FCC regulations.

Efficient Phone Operation

Normal Position

Hold the phone as you would any other telephone with the antenna

pointed up and over your shoulder.

Tips on Efficient Operation:

For your phone to operate most efficiently;

Persons with pacemakers

Extend your antenna fully

Should ALWAYS keep the phone more than six inches from their

pacemaker when the phone is turned ON

Do not touch the antenna unnecessarily when the phone is in

use. Contact with the antenna affects call quality and may cause

the phone to operate at a higher power level than otherwise

needed.

Should not carry the phone in a breast pocket

Should use the ear opposite the pacemaker to minimize the

potential for interference

For Vehicles Equipped with an Air Bag

If you have any reason to suspect that interference is taking place,

turn your phone OFF immediately.

An air bag inflates with great force. DO NOT place objects, including

both installed or portable wireless equipment, in the area over the air

bag or in the air bag deployment area. If in-vehicle wireless equipment

is improperly installed and the air bag inflates, serious injury could

result.

Hearing Aids

Some digital wireless phones may interfere with some hearing aids.

In the event of such interference, you may want to consult your

hearing aid manufacturer to discuss alternatives.

Batteries

Caution: All batteries can cause property damage, injury, or burns if a

conductive material, such as jewelry, keys, or beaded chains, touches

exposed terminals. The material may complete an electrical circuit

and become quite hot. To protect against such unwanted current

drain, exercise care in handling any charged battery, particularly when

placing it inside your pocket, purse, or other container with metal

objects. Your batteries are packed with a protective battery cover.

When the battery is detached from the phone, please use this cover

for storing your batteries when not in use.

Other Medical Devices

If you use any personal medical device, consult the manufacturer of

your device to determine if they are adequately shielded from external

RF energy. Your physician may be able to assist you in obtaining this

information. Turn your phone OFF in health care facilities when any

regulations posted in these areas instruct you to do so. Hospitals or

health care facilities may be using equipment that could be sensitive

to external RF energy.

Check the laws and regulations on the use of wireless phones in the

areas where you drive. Always obey them.

Vehicles

Also, if using your phone while driving, please:

Give full attention to driving — driving safely is your first responsibility;

Use hands-free operation, if available;

Pull off the road and park before making or answering a call if

driving conditions so require.

RF signals may affect improperly installed or inadequately shielded

electronic systems in motor vehicles. Check with the manufacturer or

its representative regarding your vehicle. You should also consult the

manufacturer of any equipment that has been added to your vehicle.

Most modem electronic equipment is shielded from RF signals.

However, certain electronic equipment may not be shielded against

the RF signals from your wireless phone.

Posted Facilities

Turn your phone OFF in any facility where posted notices so require.

FCC regulations prohibit using your phone while in the air. Turn OFF

your phone before boarding an aircraft.

Pacemakers

The Health Industry Manufacturers Association recommends that a

minimum separation of six (6”) inches be maintained between a

handheld wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations are

consistent with the independent research by and recommendations of

Wireless Technology Research.

To avoid interfering with blasting operations, turn your phone OFF

when in a blasting area or in areas posted Turn off two-way radio.

Obey all signals and instructions.

types of mobile phones are of concern because of the short distance

between the phone’s antenna — the primary source of the RF — and

the person’s head. The exposure to RF from mobile phones in which

the antenna is located at greater distances from the user (on the

outside of a car, for example) is drastically lower than that from

handheld phones, because a person’s RF exposure decreases rapidly

with distance from the source. The safety of so-called cordless

phones, which have a base unit connected to the telephone wiring in a

house and which operate at far lower power levels and frequencies,

has not been questioned.

Turn your phone OFF when in any area with a potentially explosive

atmosphere and obey all signs and instructions. Sparks in such areas

could cause an explosion or fire resulting in bodily injury or even

death.

Areas with a potentially explosive atmosphere are not always clearly

marked. They include fueling areas such as gasoline stations; below

deck on boats; fuel or chemical transfer or storage facilities; vehicles

using liquefied petroleum gas (such as propane or butane;) areas

where the air contains chemicals or particles, such as grain, dust, or

metal powders; and any other area where you would normally be

advised to turn off your vehicle engine.

How much evidence is there that handheld mobile phones might be

harmful?

Briefly, there is not enough evidence to know for sure, either way;

however, research efforts are ongoing.

FDA Consumer Update

The FDA has been receiving inquiries about the safety of mobile

phones, including cellular phones and PCS phones. The following

summarizes what is known — and what remains unknown — about

whether these products can pose a hazard to health, and what can be

done to minimize any potential risk. This information may be used to

respond to questions.

The existing scientific evidence is conflicting and many of the studies

that have been done to date have suffered from flaws in their research

methods. Animal experiments investigating the effects of RF

exposures characteristic of mobile phones have yielded conflicting

results. A few animal studies, however, have suggested that low levels

of RF could accelerate the development of cancer in laboratory

animals. In one study, mice genetically altered to be predisposed to

developing one type of cancer developed more than twice as many

such cancers when they were exposed to RF energy compared to

controls. There is much uncertainty among scientists about whether

results obtained from animal studies apply to the use of mobile

phones. First, it is uncertain how to apply the results obtained in rats

and mice to humans. Second, many of the studies that showed

increased tumor development used animals that had already been

treated with cancer-causing chemicals, and other studies exposed the

animals to the RF virtually continuously — up to 22 hours per day.

Why the concern?

Mobile phones emit low levels of radiofrequency energy (i.e.,

radiofrequency radiation) in the microwave range while being used.

They also emit very low levels of radiofrequency energy (RF),

considered non-significant, when in standby mode. It is well known

that high levels of RF can produce biological damage through heating

effects (this is how your microwave oven is able to cook food).

However, it is not known whether, to what extent, or through what

mechanism, lower levels of RF might cause adverse health effects as

well. Although some research has been done to address these

questions, no clear picture of the biological effects of this type of

radiation has emerged to date. Thus, the available science does not

allow us to conclude that mobile phones are absolutely safe, or that

they are unsafe. However, the available scientific evidence does not

demonstrate any adverse health effects associated with the use of

mobile phones.

For the past five years in the United States, the mobile phone industry

has supported research into the safety of mobile phones. This

research has resulted in two findings in particular that merit additional

study:

In a hospital-based, case-control study, researchers looked for an

association between mobile phone use and either glioma (a type of

brain cancer) or acoustic neuroma (a benign tumor of the nerve

sheath). No statistically significant association was found between

mobile phone use and acoustic neuroma. There was also no

association between mobile phone use and gliomas when all types of

types of gliomas were considered together. It should be noted that the

What kinds of phones are in question?

Questions have been raised about handheld mobile phones,

especially the kind that have a built-in antenna that is positioned close

to the user’s head during normal telephone conversation. These

3. In a study of 209 brain tumor cases and 425 matched controls,

there was no increased risk of brain tumors associated with mobile

phone use. When tumors did exist in certain locations, however, they

were more likely to be on the side of the head where the mobile phone

was used. Because this occurred in only a small number of cases, the

increased likelihood was too small to be statistically significant.

average length of mobile phone exposure in this study was less than

three years.

When 20 types of glioma were considered separately, however, an

association was found between mobile phone use and one rare type

of glioma, neuroepithelliomatous tumors. It is possible with multiple

comparisons of the same sample that this association occurred by

chance. Moreover, the risk did not increase with how often the

mobile phone was used, or the length of the calls. In fact, the risk

actually decreased with cumulative hours of mobile phone use. Most

cancer causing agents increase risk with increased exposure. An

ongoing study of brain cancers by the National Cancer Institute is

expected to bear on the accuracy and repeatability of these results.

4. In summary, we do not have enough information at this point to

assure the public that there are, or are not, any low incident health

problems associated with use of mobile phones. The FDA continues to

work with all parties, including other federal agencies and industry, to

assure that research is undertaken to provide the necessary answers

to the outstanding questions about the safety of mobile phones.

What is known about cases of human cancer that have been reported

in users of handheld mobile phones?

1. Researchers conducted a large battery of laboratory tests to

assess the effects of exposure to mobile phone RF on genetic

material. These included tests for several kinds of abnormalities,

including mutations, chromosomal aberrations, DNA strand breaks,

and structural changes in the genetic material of blood cells called

lymphocytes. None of the tests showed any effect of the RF except

for the micronucleus assay, which detects structural effects on the

genetic material. The cells in this assay showed changes after

exposure to simulated cell phone radiation, but only after 24 hours of

exposure. It is possible that exposing the test cells to radiation for this

long resulted in heating. Since this assay is known to be sensitive to

heating, heat alone could have caused the abnormalities to occur.

The data already in the literature on the response of the micronucleus

assay to RF are conflicting. Thus, follow-up research is necessary.

Some people who have used mobile phones have been diagnosed

with brain cancer. But it is important to understand that this type of

cancer also occurs among people who have not used mobile phones.

In fact, brain cancer occurs in the U.S. population at a rate of about 6

new cases per 100,000 people each year. At that rate, assuming 80

million users of mobile phones (a number increasing at a rate of about

1 million per month), about 4800 cases of brain cancer would be

expected each year among those 80 million people, whether or not

they used their phones. Thus it is not possible to tell whether any

individual’s cancer arose because of the phone, or whether it would

have happened anyway. A key question is whether the risk of getting a

particular form of cancer is greater among people who use mobile

phones than among the rest of the population. One way to answer that

question is to compare the usage of mobile phones among people

with brain cancer with the use of mobile phones among appropriately

matched people without brain cancer. This is called a case-control

study. The current case-control study of brain cancers by the National

Cancer Institute, as well as the follow-up research to be sponsored by

industry, will begin to generate this type of information.

2. The FDA is currently working with government, industry, and

academic groups to ensure the proper follow-up to these industry-

funded research findings. Collaboration with the Cellular

Telecommunications Industry Association (CTIA) in particular is

expected to lead to FDA providing research recommendations and

scientific oversight of new CTIA-funded research based on such

recommendations.

What is the FDA’s role concerning the safety of mobile phones?

Under the law, the FDA does not review the safety of radiation-

emitting consumer products such as mobile phones before marketing,

as it does with new drugs or medical devices. However, the agency

has authority to take action if mobile phones are shown to emit

radiation at a level that is hazardous to the user. In such a case, the

FDA could require the manufacturers of mobile phones to notify users

of the health hazard and to repair, replace, or recall the phones so that

the hazard no longer exists.

Two other studies of interest have been reported recently in the

literature:

Two groups of 18 people were exposed to simulated mobile phone

signals under laboratory conditions while they performed cognitive

function tests. There were no changes in the subjects’ ability to recall

words, numbers, or pictures, or in their spatial memory, but they

were able to make choices more quickly in one visual test when they

were exposed to simulated mobile phone signals. This was the only

change noted among more than 20 variables compared.

Again, the scientific data do not demonstrate that mobile phones are

harmful. But if people are concerned about the radiofrequency energy

from these products, taking the simple precautions outlined above

can reduce any possible risk.

Although the existing scientific data do not justify FDA regulatory

actions at this time, the FDA has urged the mobile phone industry to

take a number of steps to assure public safety. The agency has

recommended that the industry support needed research into

possible biological effects of RF of the type emitted by mobile phones,

design mobile phones in a way that minimizes any RF exposure to

the user that is not necessary for device function, and cooperate in

providing mobile phone users with the best possible information on

what is known about possible effects of mobile phone use on human

health.

Where can I find additional information?

For additional information, see the following websites:

Federal Communications Commission (FCC) RF Safety Program

(select Information on Human Exposure to RF Fields from Cellular

and PCS Radio Transmitters): http://www.fcc.gov/oet/rfsafety

At the same time, the FDA belongs to an interagency working group

of the federal agencies that have responsibility for different aspects

of mobile phone safety to ensure a coordinated effort at the federal

level. These agencies are:

World Health Organization (WHO) International Commission on Non-

Ionizing Radiation Protection (select Q’s &A’s):

http://www.who.int/emf

United Kingdom, National Radiological Protection Board:

http://www.nrpb.org.uk

National Institute for Occupational Safety and Health

Environmental Protection Agency

Cellular Telecommunications Industry Association (CTIA): http://

www.wow-com.com

Federal Communications Commission

Occupational Safety and Health Administration

National Telecommunications and Information Administration

The National Institutes of Health also participates in this group.

U.S. Food and Drug Administration (FDA) Center for Devices and

Radiological Health: http://www.fda.gov/cdrh/consumer/

In the absence of conclusive information about any possible risk, what

can concerned individuals do?

If there is a risk from these products—and at this point we do not

know that there is—it is probably very small. But if people are

concerned about avoiding even potential risks, there are simple steps

they can take to minimize the risk. For example, time is a key factor in

how much exposure a person receives. Those persons who spend

long periods of time on their handheld mobile phones could consider

holding lengthy conversations on conventional phones and reserving

the handheld models for shorter conversations or for situations when

other types of phones are not available.

People who must conduct extended conversations in their cars every

day could switch to a type of mobile phone that places more distance

between their bodies and the source of the RF, since the exposure

level drops off dramatically with distance. For example, they could

switch to a mobile phone in which the antenna is located outside the

vehicle, a handheld phone with a built-in antenna connected to a

different antenna mounted on the outside of the car or built into a

separate package, or a headset with a remote antenna to a mobile

phone carried at the waist.

Q: How do I find out my lock code?

A: The lock code is normally the last four digits of your

mobile phone number or the manufacturer default

number 0000.

Chapter 11. Frequently Asked Questions

Q: How do I record conversation over the phone?

Please check with your service provider for further

details. Each service provider may program this

differently.

A: Hold down the

key while you are on a call.

Q: How many Voice Activated phone numbers can I

store in the phone book memory?

A: Total of 20 voice activated phone numbers.

Q: What is my Pin Code?

A: Check with your service provider.

Q: How much space do I have available for my Voicemail

machine and Voice memos?

A: Total of 2K.

Q:How do I retrieve a new message or page?

A: Press

For voicemail: Press

Press . Then you can check the voicemail box.

For text messages: Press Text.

VoiceMail.

Q: How do I view the outgoing calls, incoming calls

and missed calls?

A: Press Soft Key 2 Book then press number

Call History.

IMPORTANT NOTE: You can only receive messages

or pages if your service provider has activated and set

up this feature.

Q: How do I view all numbers stored in memory?

A: Press Soft Key 2 Book then press number

Phone Book.

Q:How do I send a text message?

A: Press

then select

Select number

Find Entry then press Ok .

The 2-way SMS messaging needs to be set up by

your service provider.

Q: How do I clear the call timer (reset the time used

monthly)?

Q:How many events can I add to the schedule?

A: Total of 47 events.

A: Press Soft Key 2 Book , press

, then select

Select or . Use Soft Key 1 Opt . Then select

Zero to reset the timer.

Q: How do I clear All Calls?

A: This cannot be reset.

TM510 Summary Table

Enable One-Touch (Menu, 4, 4) Press

the first digit and press and hold the

second digit of the memory location

Enable One-Touch (Menu, 4, 4) Press

the first and second digit and press and

hold the third digit of the memory

location

Two-Touch

Speed Dialing

FUNCTIONS

Power On

STEPS

Hold

(for about 2 seconds)

Three-Touch

Speed Dialing

Power Off

Making a call

Phone Number,

Receiving a call Open the cellcase or if the cellcase is

open, Press any key except

Redialing

At Connection Failure,

Volume Adjust

Ringing Sound

Ringing Type

Saving Phone

Numbers

Menu, 1, 3,

Menu, 1, 1,

Menu, 1, 2,

Viewing Your

Phone Number

Call History

Mute

Book, 5

Book, 1

Phone number, Opt, Save, Memory

Menu, 1 while on line

Menu, 2 while on line

Menu, 3 while on line

Location, Next, Select Label,

Name, Save (Max 198)

, Enter

Memo

Recording

conversation

Last Call Time

Saving Phone

Numbers with

Voice Dialing

Phone number, Opt, Save, Memory

Location, Next, Select Label, , Enter

Name, , No Voice, , Voice, Save,

Book, 1, 4, 1, Can’t be Erased

Clear Home Calls Book, 1, 4, 2, Opt, Zero

Ok, Say the Name, Again (Total of 20-

50)

Clear Roam Calls Book, 1, 4, 3, Opt, Zero

All Calls Time

Minute Alert

Book, 1, 4, 4, Can't be Erased

Menu, 1, 7, 2, , Ok

, Ok

Book, 2, 1, Enter Location, or press Ok,

Select location, View, Select the

Adding a Phone

Number to a

Previously

Backlight Setting Menu, 2, 1,

default label (Home, Office...)

Lock

Menu, 6, Lock Code, 1,

Menu, 6, Lock Code, 6,

Code, Re-Enter New Code

Menu, 6, Lock Code, 2,

Menu, 2, 2, Opt, Edit

, Ok

Select the new Label , Select Empty

Saved Entry

New Code

, New

, Enter Number, Save, Default#,Sel.

Book, 2, 1, Enter Location, or press Ok,

Deleting Phone

Numbers

Restrict

, Ok

Select location

Entry , Sel, Yes

, View, Opt, Erase

, Sel

Banner

Force Calls

Menu, 3, 4, Ok (Used in some analog

After Enable One-Touch (Menu, 4, 4)

Hold the last digit 1-8 of the memory

location (Entry 9 is reserved for

emergency calls.)

One-Touch

areas only)

Speed Dialing

Auto Answer

Menu, 4, 2,

, Ok (Works only when

connected to the portable or installed

hands-free kit)

Setting the

Ringer Off

Menu, 1, 3, Increase the Volume

Menu, 4, 2,

, Answer Machine, Ok

Voice service

(uses the pre-programmed message and

the caller can leave a message in

voicemail

Clear Call List

Language

Menu, 6, Lock Code, 3,

, Yes, Ok

Menu, 2, 4,

Spanish)

, Ok (English and

Setting the

Menu, 7, 2,

, Practice the Voice

Voice Command

Version

Menu, 2, 5

Menu, 3, 1,

only)

Command, Yes/No, 3- When you

receive a call, you say Yes, the call is

connected and say No the bell Rings.

(This option is available only when

phone is connected to the hands-free

kit)

System Select

, Ok (Set by provider

, Ok (Requires a data

Set NAM

Menu, 3, 2,

only)

Data/Fax Mode Menu, 4, 1,

cable and data mode needs to be activated

by provider )

Scheduler

Book, 3 This option is available in

digital areas only (Max. 47 events)

Audio AGC

(Audio Gain

Control)

Menu, 4, 6,

, Ok (Provides better

Alarm (Wake Up) Book, 4 This option is available in

audio experience in some environments)

digital areas only (Max 47 events)

Manner Mode

Voicemail

Hold Down

, 1,

Key for 2 Seconds

Calculator

Menu, 5, 2

(Works in digital areas

Menu, 7, 1, 1, Opt, Replay or Hold Down

, 1, Opt, Replay (Max. recording 4

minutes.)

only)

Play Back Voice

Memo, Recording

Conversation or

Voice Messages

Erasing Play Back

Voice Memo or

Recording

Text Message

Send Message

, 3

, 2, Type Phone Number, Opt,

Continue, Sel, Type Message, Opt,

Send

Menu, 7, 1, 1, Opt, Erase, Sel, Ok

Conversation

Start Browser

Menu, 8 or Hold Down 0

Using the Voice Menu, 7, 4,

, Ok (In Manual Mode

Dialing Feature Press

to start this feature or Auto

When Making a Mode. This feature will be available upon

Call

opening the cellcase

Licensed by QUALCOMM Incorporated under one or more of the following Patents;

U.S. Patent No. 4,901,307 U.S. Patent No. 5,056,109 U.S. Patent No. 5,099,204

U.S. Patent No. 5,101,501 U.S. Patent No. 5,103,459 U.S. Patent No. 5,107,225

U.S. Patent No. 5,109,390

Product manufactured or sold in U.S.; “This product is covered by U.S. Pat.

5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending.”

Transcend Information JetFlash 2B User Manual
Sony Ericsson S80 User Manual
Siemens M30 User Manual
Sears 247 780892 User Manual
Samsung SGH S308 User Manual
Samsung SCH A795 User Manual
Samsung Reality SCH u820 User Manual
Samsung Rant SPH m540 User Manual
Samsung GH68 04847A User Manual
Quantum Computer Drive 6 01658 06 User Manual