C.313
PROFESSIONAL TABLETOP CD PLAYER
MP3
USER MANUAL
CONTROL OVERVIEW
MP3
1. CTN/SGL – Toggles between Continuous and Single play modes.
Continuous mode operates like a normal CD player, playing the entire
disc without stopping. Single mode only plays one track at a time,
returning to the Cue point when the track is completed. The LCD will
display “SINGLE” when in that mode.
5. TIME – Switches the time value displayed in the LCD between elapsed
track time, remaining track time, and the total remaining time for the
entire disc. Markers next to the time readout indicate which of these
modes is enabled.
6. PITCH RANGE INDICATORS – Indicates the pitch range in percent as
2. BROWSE – This encoder enables you to browse the tracks on your CD
without actually selecting each one as you go down the list. Turn the
encoder to browse, and push on the encoder to select. This function
works with both MP3 and audio discs.
selected by #8.
7. KEY LOCK BUTTON – Enables the key lock function, which allows the
tempo or BPM of the music to be altered without affecting the key.
This button is illuminated when enabled.
3. LCD DISPLAY – Shows various information on the status, modes, and
functions of the unit.
8. PITCH RANGE BUTTON – Selects between a pitch range of +/- 8, 16,
25, or 100%. When Playing MP3 files, the range is limited to 8% and
16%.
4. FOLDERS – In the same fashion that you BROWSE (#2) tracks, you
can use this encoder to browse a list of folders. Scrolling the encoder
will browse the list of folders. Pushing the encoder will enter and exit
the folder. Use it together with the BROWSE encoder to browse and
select tracks.
9. PITCH LOCK BUTTON – When illuminated, the pitch control is locked
at 0%, regardless of the pitch slider’s position.
4
LCD DISPLAY
30. TRACK – Indicates the current track selected or being played.
31. CD/MP3 – Indicates whether the current disc is a standard audio disc
or an MP3 disc.
32. PITCH VALUE – Shows the percentage of the pitch slider.
33. LOCK – Shows when Pitch Lock and/or Key Lock are active.
34. SINGLE – Controlled by the CTN/SGL button, this indicates when the
unit is set to play just one track at a time. When this is not illuminat-
ed, the CD will play continuously through all tracks.
35. A.CUE – Indicates when Auto Cue is active. To activate Auto Cue,
press and hold the SGL/CTN button.
36. LOOP – Indicates when the CD is in loop mode.
37. RELOOP – Indicates when there is a previously set loop, and that the
loop is ready to be played again.
38. PLAY – Indicates when the unit is currently playing a CD.
39. PAUSE – Indicates the unit is in CUE or PAUSE mode.
40. CUE – Indicates the unit is at a cue point and is ready to play.
43. TIME BAR – Shows a proportionate visual representation of the time
remaining or time elapsed.
41. WHEEL INDICATOR – This is a visual representation of a vinyl mark-
er, which is traditionally used to mark the location of a certain sound
or cue point on a vinyl record. Here, it indicates the play position,
rotates during playback in either direction, and stops during cue or
pause mode. It also indicates the speed of the forward and reverse
search operation.
44. TIME DISPLAY – Displays the time of track(s) currently selected in
increments of Minutes, Seconds, and Frames.
45. TEXT – The text portion of the display (the bottom row) is mainly used
to display MP3 file names or CD text information. It is also used to dis-
play various messages, such as effects parameter settings and more.
See operating instructions for further explanation.
42. ANTI SHOCK AND BUFFER INDICATOR – Indicates the current sta-
tus of the buffer memory. This is represented on the display by a
bucket being filled or emptied. The bucket itself represents the instant
start function (which works by buffer memory). If the bucket is flash-
ing, the instant start is not available. Each bar within the bucket rep-
resents 2 seconds of anti shock protection. There is up to 10 seconds
of anti shock protection available.
46. ELAPSED / TOTAL / REMAIN – Indicates whether the time shown on
the display refers to total remaining time or track remaining time. If
either of these are not illuminated, this indicates elapsed track time.
SETUP
CHECKING THE CONTENTS – Check that the carton contains all of the
following items.
• Tabletop CD player unit
• Printed user’s manual
• One RCA cable
• One power cable
• One fader start / relay cable
INSTALLING THE UNIT
• Place the unit on a flat, level surface.
• Be sure the player is in a well-ventilated area where it will not be
exposed to direct sunlight, high temperatures, or high humidity.
• Try to place the unit as far as possible from Tvs and tuners, as the unit
may cause undesirable interference.
• The player will work normally when the unit is within 15 degrees of the
vertical plane. If the unit is tilted excessively, discs may not load or
unload properly, or playback may be adversely affected.
CAUTION
CONNECTIONS
• Be sure to use the supplied cables. Using other types of cables may result
in unit damage.
• Make sure that the unit and any other equipment in the signal chain are
turned off prior to making any connections.
• To avoid severe damage to the unit, be sure the power is OFF when mak-
ing any connections.
• Connect the RCA cable to the rear of the unit and to the input on your
mixer.
• Connect the power cable to the rear of the unit and to a proper AC out-
let.
6
OPERATING INSTRUCTIONS
Browsing
UPDATING FIRMWARE
• Turn the BROWSE encoder to browse the list of tracks on the CD.
• While the track number is flashing, push down on the encoder to select
the track.
• If it is an MP3 disc with folders, use the FOLDER encoder to browse fold-
ers as desired.
Checking Firmware Version
• Turn the unit off.
• Hold down the sample MODE while powering up the unit.
• Release MODE to go back to the normal playback mode.
• Pushing down on the encoder will enter or exit folders.
Updating The Firmware
STARTING PLAYBACK
Firmware updates may, as necessary, become available from Stanton’s
ed to create a bootable CD. We recommend using Magic ISO Maker
Press the PLAY/PAUSE button during the pause or cue mode to start
playback. The PLAY/PAUSE button illuminates with a solid green light
during playback.
• Once you have burned a bootable disc from the ISO file, insert the CD
into the C.313. The display will read UPDATE, then SUCCESS.
• The unit will automatically eject the CD once the update is complete.
• Turn the unit off and back on to complete the update process.
STOPPING PLAYBACK
There are two ways to stop playback. Press the PLAY/PAUSE button dur-
ing playback to pause at that point, or press the CUE button during play-
back to return to the position at which playback started.
OPENING AND CLOSING
Press the OPEN/CLOSE button to open or close the disc tray, or press the
PLAY button and the disc tray will close automatically. If the tray is not
closed after 60 seconds it will close automatically and enter pause mode.
The disc tray cannot be opened during playback. This prevents playback
from being interrupted if the OPEN/CLOSE button is pressed accidental-
ly. Stop playback by engaging cue or pause mode, and then press the
OPEN/CLOSE button.
CUEING
Cueing is the action of preparing tracks for playback. When the CUE but-
ton is pressed, playback returns to the cue point and enters pause mode.
When the PLAY/PAUSE button is pressed during the cue mode, playback
starts. Playback can also be resumed from cue mode by pressing the
PLAY/PAUSE while holding the CUE button. This same action can be per-
formed on the memory pads.
LOADING DISCS
Auto Cue
Hold a disc by its edges and place on the disc tray with the label side fac-
ing up. Do not touch the play surface (glossy side). CAUTION: DO NOT
place foreign objects on the disc tray and do not place more than one disc
on the tray at a time. Doing so may result in malfunction and damage of
the unit. DO NOT push the disc tray in manually, as this may also result
in malfunction and damage.
• The unit’s Auto-Cue function will automatically set the first cue point at
the beginning of each track. To return to that cue point, simply press the
cue button. To save that cue point, hit save and press any pad. If the
pad already has a cue point, it will be replaced.
• To turn Auto Cue on and off, hold down the SGL/CTN button. When
Auto-Cue is on, the display will show A.Cue
Setting Cue Points
DO NOT POWER OFF UNIT WHILE DISC IS INSERTED
Removing the disc from the drive before powering off will insure
that the laser pick-up remains properly calibrated over time.
There are several ways to set and recall cue points, either in real-time to
enhance a performance and create cool effects, or offline for fine adjust-
ments.
• During playback, press any empty memory pad to set a cue point on the
fly. The pad’s indicator will flash red while saving the cue point, and then
turn to green to show it is ready for playback. Press it again to return to
the cue point in real-time. Once the cue has been recalled, the indicator
will turn red to show playback was started from that cue point.
• During pause, use the jog wheel to find the right cue point. The unit will
repeat the same frame over and over, creating a stutter effect. This func-
tion is called Frame Search. While the CUE button is flashing, press it to
select the cue point
BURNING CD-R’s CD-RW’s
When burning CD-R’s or CD-RW’s for the C313, it is
strongly recommended to set your burner at 8x write
speed. You can change the write speed within your CD
burning software. Check the following links for specific
instructions:
• During playback press the IN button to create a cue point on the fly. To
save it to a pad, press SAVE, then press the desired pad.
HINT: Anytime the CUE button is flashing, it means it is ready to save
a new cue point.
SELECTING TRACKS
Whether using MP3 or standard audio discs, tracks can be selected in
one of two ways:
Searching
• Select the desired track by pressing the back or forward Search (21) but-
tons to move to the previous or next track. When a new track is selected
during playback, playback begins as soon as the track selection is com-
pleted.
7
FACTORY SETTINGS
RELAY PLAY USING TWO PLAYERS
To return to factory settings…
• Power off the unit
• Press and hold the CLEAR button as you power up the unit
• The display will read clearALL, release the CLEAR button
When both CD players are connected to each other via their FADER
START / RELAY jacks, the players can work in unison by playing tracks
one after another from both units.
• Set both players to single play mode (the SINGLE indicator will be illu-
minated in the LCD displays).
WARNING: Restoring factory settings will delete cue point memory.
• Begin playback on the first player.
FADER START
• When the first track ends, playback will automatically start on the sec-
ond player and the first player will automatically enter standby mode.
• When the track on the second player ends, the first player will play the
next track. The players will continue to perform continuous relay play
until stopped or until the last track is played.
By connecting the CD player to a mixing board that has the fader start fea-
ture, the crossfader will engage playback or cue mode depending on its
location. If the CD player is connected to the left side of the crossfader,
playback will start once the fader is moved from the left most position
towards the right. The CD player will re-cue itself when the crossfader is
brought back to the left most position. Two CD players can be hooked up
in this fashion to work on both sides of the crossfader.
• You can set a cue point on the standby player to jump directly to that
point.
SLEEP
The C.313 will automatically go into sleep mode after 15 minutes of inac-
tivity. Press either the Play or Cue button to wake it up.
SPECIFICATIONS
1. APPLICATION Model C.313
2. POWER SOURCE
US: 120V, 60Hz, AC 15W
EU: 230V, 50Hz, AC 15W
JP: 100V, 50/60Hz, AC 15W
UK/AUS: 240V, 50Hz, AC 15W
3. DIMENSIONS
4. WEIGHT
318 (W)x 358 (D)x 109.5 (H) mm
4.3 Kgs
5. AUDIO CHARACTERISTICS
(1) Frequency Response
(2) Output Level
20Hz to 20kHz +0/-1.5 dB
+6dBV
(3) THD+N
(4) S/N Ratio (ref: fullscale)
<0.015% @ 1kHz
88dB
6. SEARCHING TIME (TEST DISC: TCD-792)
ITEM
TYPICAL
LIMITS
4sec
6sec
CONDITION
(1)
(2)
Short access time 2sec
Long access time 4sec
Play next track
Track 1 ->Track 20
Track 20 ->Track 1
7. PLAYABILITY
ITEM
TYPICAL
1mm
1mm
75um
140um
LIMIT
CONDITION
TCD-725
TCD-725
TCD-725
TCD-712 W/O TRACK JUMP
TCD-731R
(1)
(2)
(3)
(4)
(5)
Interruption
Black dot
Finger prints
Eccentricity
Vertical deviation 1mm
0.7mm
0.6mm
65um
140um
0.5mm
9
WARRANTY & RETURN POLICY
Warranty
Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge, repair
or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective
in material or workmanship for a period of one (1) year following the date of original purchase. Exceptions to this warranty are as noted below:
The warranty for mechanical parts which are subject to wear and tear are limited to the earlier to occur of thirty (30) days following the date of original
purchase or the following number of cycles: Faders - 15,000; Rotary potentiometers - 10,000; and Switches - 10,000.
Stanton will warrant all replacement parts and repairs for ninety (90) days from the date of original shipment. Repairs made necessary by reason of mis-
use, alteration, normal wear, or accident are not covered under this warranty.
Returns
Authorized Stanton dealers are only authorized to sell and distribute merchandise within a specific country. All goods requiring warranty repair or replace-
ment must be returned (freight prepaid if not hand-delivered) to the authorized Stanton dealer from whom the merchandise was purchased and in the
same country where the merchandise was purchased. For purposes of purchases made via the Internet, the merchandise must be returned to the author-
ized Stanton dealer in the country where the authorized Stanton dealer which sold the merchandise to purchaser is located and not the authorized Stanton
dealer in the country where the purchaser is located or the country in which the merchandise was received. Any returns to a non-authorized dealer or to
an authorized Stanton dealer not in the same country as the merchandise was intended to be sold or as set forth above will void this warranty.
To initiate a warranty repair, you must contact the authorized Stanton dealer from whom you purchased the merchandise, and follow such authorized
Stanton dealer’s return policy.
Stanton assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the merchandise.
Stanton’s liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party, or product liability, and relating
to the merchandise shall not exceed the price received by Stanton from your purchase of such merchandise. In no event will Stanton be liable for any
special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence
of Stanton or otherwise. To the extent permitted by law and except as otherwise provided above, Stanton disclaims any express or implied warranties of
merchantability or fitness for a particular purpose.
The above warranty provides you with specific legal rights. You may also have additional rights, which are subject to variation from state to state and
country to country.
If there is a dispute regarding the warranty of merchandise that does not fall under the warranty conditions stated above, please include a written expla-
nation with the merchandise when returned pursuant to the terms and conditions set forth herein.
Stanton Magnetics, Inc, 3000 SW 42 St. Hollywood, Florida 33312.
10
|