0RELOHꢀ3KRQH
7ꢁꢂ/;
8VHU·Vꢀ*XLGH
ꢀꢁꢂꢃꢄꢄꢅꢆꢇꢈ
Table of Contents
Setting the Display Language . . . . . . . . . . . . . . . . . . . . . 22
Setting the Ring Sound . . . . . . . . . . . . . . . . . . . . . . . . . 22
Setting the Ring Volume . . . . . . . . . . . . . . . . . . . . . . . . 23
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
International Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Caller Number Identification . . . . . . . . . . . . . . . . . . . . . 27
Low Battery Power Alert . . . . . . . . . . . . . . . . . . . . . . . . 27
Security Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Document Conventions . . . . . . . . . . . . . . . . 1
Guidelines for Safe and Efficient Use . . . . . 3
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Product Care and Operation . . . . . . . . . . . . . . . . . . . . . . .6
Battery Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Getting Started. . . . . . . . . . . . . . . . . . . . . . . . 9
Attaching Your Standard or Swivel Belt Clip . . . . . . . . . . .9
Connecting and Removing Your Battery . . . . . . . . . . . . .10
Charging Your Battery . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Selecting Your Charger . . . . . . . . . . . . . . . . . . . . . . . . . .11
Using Menus . . . . . . . . . . . . . . . . . . . . . . . . 29
Opening Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Opening Submenus . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Changing Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Exiting the Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Quick Menu Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Menu Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Learning About Your Mobile Phone. . . . . . 15
Highlights of Your Mobile Phone . . . . . . . . . . . . . . . . . .15
The Parts of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . .16
Phone Display Icons and Display Indicators . . . . . . . . . .17
Key Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Display Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Menu Descriptions . . . . . . . . . . . . . . . . . . . 31
Accessing Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Phone Lists Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Basic Operations . . . . . . . . . . . . . . . . . . . . . 21
Summary of Basic Operations . . . . . . . . . . . . . . . . . . . . .21
Turning Your Phone On and Off . . . . . . . . . . . . . . . . . .22
Messages Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Call Manager Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Sounds Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Profiles Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Manual Installation of Your Modem Driver or Voice
Call Dialer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Problems You Can Solve . . . . . . . . . . . . . . 67
Displayed Messages and Explanations . . . . . . . . . . . . . . . 67
Problems and Possible Solutions . . . . . . . . . . . . . . . . . . . 67
Using the Phonebook . . . . . . . . . . . . . . . . . 45
Storing a Phone Number and Name . . . . . . . . . . . . . . . . 45
Recalling a Phone Number or Name . . . . . . . . . . . . . . . 47
Editing a Phone Number . . . . . . . . . . . . . . . . . . . . . . . . 48
Erasing a Phone Number . . . . . . . . . . . . . . . . . . . . . . . . 48
Phone Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Message Services . . . . . . . . . . . . . . . . . . . . 51
Text Message Service . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Text Message Memory . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Data, Fax, and Internet Calls. . . . . . . . . . . . 57
Differences Between Data, Fax, and Internet Calls . . . . . 57
Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Setting Up Your Computer . . . . . . . . . . . . . . . . . . . . . . 58
Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Achieving Best Performance . . . . . . . . . . . . . . . . . . . . . . 61
Installing Your Modem Driver From Your Compact
Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Document Conventions
• Menu names are shown in the following
• When this guide instructs you to press a key, press
typeface: MENUS.
and release the key.
• Submenu names are shown in the following type-
• When this guide instructs you to press and hold a
face: Submenu Names.
key, press and hold the key for one to two seconds.
• Keys names are shown in the following typeface:
• Press the down arrow when you see this symbol
&/5.
(Ô).
• Text that is seen in the phone’s display is shown in
• Press the up arrow when you see this symbol (Ñ).
the following typeface: di spl ays.
• Your phone is at the Standby screen when it is
powered On and a call is not in progress.
ꢀ
The quick access shortcuts to your
phone menu and settings are identified
using the hourglass symbol.
Document Conventions
1
ꢀ
'RFXPHQWꢁ&RQYHQWLRQV
Guidelines for Safe and Efficient Use
The mobile phone is one of the most exciting and inno-
vative products ever developed. Your phone can help you
to stay in touch with your office, your home, emergency
services and others.
industry reviewed the available body of research to
develop the ANSI Standard (C95.1).
The design of your phone complies with the FCC guide-
lines (and those standards).
* American National Standards Institute: National Coun-
cil on Radiation Protection and Measurements; Interna-
tional Commission on Non-Ionizing Radiation Protection.
Safety
Exposure to Radio Frequency Signals
Antenna Care
Your wireless handheld portable telephone is a low
power radio transmitter and receiver. When it is ON, it
receives and also sends out radio frequency (RF) signals.
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the phone and may violate
FCC regulations.
In August, 1996, the Federal Communications Com-
mission (FCC) adopted RF exposure guidelines with
safety levels for handheld wireless phones. Those guide-
lines are consistent with the safety standards previously
set by both US and international standards bodies:
Phone Operation
NORMAL POSITION: Hold the phone as you would
any other telephone with the antenna pointed up and
over your shoulder.
• ANSI C95.1 (1992)*
• NCRP Report 86 (1986)*
• ICNIRP (1996)*
TIPS ON EFFICIENT OPERATION: For your phone
to operate most efficiently:
• Extend your antenna fully (where applicable).
Those standards were based on comprehensive and peri-
odic evaluations of the relevant scientific literature. For
example, over 120 scientists, engineers, and physicians
from universities, government health agencies, and
• Do not touch the antenna unnecessarily when the
phone is in use. Contact with the antenna affects
call quality and may cause the phone to operate at a
higher power level than otherwise needed.
Guidelines for Safe and Efficient Use
3
• Call roadside assistance or a special wireless non-
emergency assistance number when necessary.
Driving
Check the laws and regulations on the use of wireless
telephones in the areas where you drive. Always obey
them. Also, if using your phone while driving, please:
Electronic Devices
Most modern electronic equipment is shielded from RF
signals. However, certain electronic equipment may not
be shielded against RF signals from your wireless phone.
• Give full attention to driving - driving safely is your
first responsibility.
• Use handsfree operation, if available.
• Pull off the road and park before making or answer-
ing a call if driving conditions so require.
Pacemakers
The Health Industry Manufacturers Association recom-
mends that a minimum separation of six (6”) inches be
maintained between a handheld wireless phone and a
pacemaker to avoid potential interference with the pace-
maker. These recommendations are consistent with the
independent research by and recommendations of Wire-
less Technology Research.
In addition, Ericsson suggests the following safe driving
tips if you are using your phone while driving:
• Get to know your wireless phone and its features
such as speed dial and redial.
• Position your wireless phone
within easy reach.
Persons with pacemakers:
• Suspend conversations during
hazardous driving conditions or
situations.
• Should ALWAYS keep the phone more than six
inches from their pacemaker when the phone is
turned ON.
• Do not take notes or look up
• Should not carry the phone in a breast pocket.
phone numbers while driving.
• Should use the ear opposite the pacemaker to mini-
mize the potential for interference.
• Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling
into traffic.
• If you have any reason to suspect that interference is
taking place, turn your phone OFF immediately.
• Do not engage in stressful or emotional conversa-
tions that may be distracting.
Hearing Aids
• Use your wireless phone to call for help.
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
• Use your wireless phone to help others in emergen-
cies.
ꢂ
*XLGHOLQHVꢁIRUꢁ6DIHꢁDQGꢁ(IILFLHQWꢁ8VH
want to consult your service provider (or call the cus-
tomer service line to discuss alternatives).
Blasting Areas
To avoid interfering with blasting operations, turn your
phone OFF when in a “blasting area” or in areas posted:
“Turn off two-way radio.” Obey all signs and instruc-
tions.
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if it is ade-
quately shielded from external RF energy. Your physician
may be able to assist you in obtaining this information.
Potentially Explosive Atmospheres
Turn your phone OFF when in any area with a poten-
tially explosive atmosphere and obey all signs and
instructions. Sparks in such areas could cause an explo-
sion or fire resulting in bodily injury or even death.
Turn your phone OFF in health care facilities when any
regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may be using equip-
ment that could be sensitive to external RF energy.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include fueling
areas such as gasoline stations; below deck on boats; fuel
or chemical transfer or storage facilities; vehicles using
liquefied petroleum gas (such as propane or butane);
areas where the air contains chemicals or particles, such
as grain, dust, or metal powders; and any other area
where you would normally be advised to turn off your
vehicle engine.
Vehicles
RF signals may affect improperly installed or inade-
quately shielded electronic systems in motor vehicles.
Check with the manufacturer or its representative
regarding your vehicle. You should also consult the man-
ufacturer of any equipment that has been added to your
vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place
objects, including both installed or portable wireless
equipment, in the area over the air bag or in the air bag
deployment area. If in-vehicle wireless equipment is
improperly installed and the air bag inflates, serious
bodily injury could result.
notices so require.
Aircraft
FCC regulations prohibit using your phone while in the
air. Switch OFF your phone before boarding an aircraft.
Guidelines for Safe and Efficient Use
5
• Make sure the electric cord is located so that it will
not be stepped on, tripped over, or otherwise sub-
jected to damage or stress.
Product Care and Operation
Ericsson suggests you read and observe the following for
• To reduce risk of electric shock, unplug the unit
from the power source before attempting any clean-
ing. Once unplugged, use a soft cloth lightly damp-
ened with water for cleaning.
safe care and operation of your phone:
• Do not allow children to play with your phone.
They could hurt themselves or others, or could acci-
dentally damage the phone. Your phone may con-
tain small parts that could be detached and create a
choking hazard.
• DANGER - Never alter the AC cord or plug. If the
plug will not fit into the outlet, have a proper outlet
installed by a qualified electrician. Improper con-
nection can result in risk of electric shock.
• Do not expose your mobile phone to moisture or
extreme temperatures.
• Don’t continue to twist the antenna after it has
been inserted. Excess twisting will damage the
antenna.
• Only Ericsson original accessories are recom-
mended. Failure to use them may result in loss of
performance or product damage, and will void the
warranty.
• Be cautious if removing your antenna. A detached
antenna may be a choking hazard for children.
• Do not attempt to disassemble the product. Doing
so will void warranty. This product does not con-
tain consumer serviceable components. Service
should only be performed by Authorized Service
Centers.
How to use your phone for optimum performance with
minimum power consumption:
• Hold the phone as you would any other telephone.
While speaking directly into the mouthpiece, angle
the antenna in a direction up and over your shoul-
der. If the antenna is extendable/retractable, it
should be extended during a call.
• Do not allow objects to fall on, or liquids to spill on
products.
• Connect AC (power supply) only to designated
• Do not hold the antenna when the phone is in use.
Holding the antenna affects call quality, may cause
the phone to operate at a higher power level than
needed and shortens talk and standby times.
power sources as marked on the product.
• To reduce risk of damage, remove the electrical cord
from the outlet by pulling the AC adapter rather
than the cord.
ꢃ
*XLGHOLQHVꢁIRUꢁ6DIHꢁDQGꢁ(IILFLHQWꢁ8VH
• Do not let the metal contacts on the battery touch
another metal object such as keys in your pocket.
This could short-circuit and damage the battery.
Battery Information
New Batteries
• Do not attempt to take a battery apart.
The battery packaged with your phone is not fully
charged. For maximum battery capacity, use your
charger to condition the battery.
• Do not expose a battery to open flame. This could
cause the battery to explode.
• Turn your phone OFF before removing the battery.
• Use only the AC/DC adapter supplied with your
battery charger. Using a different adapter could be
dangerous and will void your phone warranty.
Recycling Your Battery
Your phone manufacturer is a member of the Recharge-
able Battery Recycling Corporation (RBRC), a non-
profit service organization designed to assist in the recy-
cling of rechargeable batteries. Many areas require the
recycling of rechargeable batteries. In the U.S., call 1-
800-822-8837 to find out how to recycle your battery.
Outside the U.S., contact your local retailer for recycling
instructions.
• Never charge a battery when the ambient room
temperature is below 50° F (10°C) or above 105°F
(40°C).
• Do not allow the battery to be placed into the
mouth. Battery electrolytes may be toxic if swal-
lowed.
Battery Use and Care
Conditioning Your Battery
A rechargeable battery has a long service life if treated
properly. A new battery, or one that has not been used
for a long period of time, should be conditioned before
using your phone. Avoid recharging a fully-charged or
almost fully-charged battery. This can result in the mem-
ory effect, which causes the battery to charge to less than
its full capacity. If your phone shuts off due to low bat-
tery power, you should charge the battery within 24
hours for the battery to reach full capacity.
To condition your battery, do the following:
ꢀꢁ Charge the battery until it is fully charged.
A
appears in the right side of the display on
your phone when the battery is fully charged.
ꢂꢁ Disconnect the charger and leave your phone ON
until the battery is completely discharged.
A beep will sound warning you that your battery is
almost discharged. Wait until your phone turns OFF.
Your battery is now completely discharged.
• Do not leave your battery where it may be sub-
jected to extremely hot or cold temperatures. This
could reduce the battery’s capacity.
Guidelines for Safe and Efficient Use
7
Note! The time required to discharge a battery varies based on
the type of battery and the number and duration of
your calls.
ꢃꢁ Completely discharge the battery and fully charge it,
three times in succession to, complete the battery
conditioning procedure.
ꢄ
*XLGHOLQHVꢁIRUꢁ6DIHꢁDQGꢁ(IILFLHQWꢁ8VH
Getting Started
Complete the following procedures to set up your
mobile phone for the first time:
ꢃꢁ While making sure that the screw is going through
both the plastic clip and through the metal support
guide, insert the screw into the opening on the back
of the phone.
• Review the document conventions used in this
guide by referring to the “Document Conventions”
chapter.
ꢄꢁ Using a small Philips head
screwdriver, turn the screw
clockwise until it is secure as
shown in the following illus-
tration. Do not over tighten
the screw.
• Attach the belt clip to the phone by referring to the
Attaching the Belt Clip to Your Phone section in
this chapter.
• Fully charge and condition your battery by refer-
ring to the Charging Your Battery section in this
chapter.
ꢅꢁ Inserting the two smaller prongs first, replace the
flexible rubber plug at the top of the clip.
• Turn your phone On by referring to the “Basic
Operations” chapter.
Swivel Belt Clip
ꢀꢁ Align the screw-in tab
Push to
release phone
between the two guides on
Attaching Your Standard or Swivel Belt Clip
the back of the phone, with
the thicker end on top.
Your Ericsson mobile phone is equipped with either a
standard or swivel belt clip:
ꢂꢁ Using a screwdriver, attach
the tab to the phone.
ꢃꢁ Place the swivel belt clip on
Standard Belt Clip
your belt or waistband.
ꢀꢁ Remove the belt clip from the plastic bag.
ꢄꢁ Slide your phone, with tab, into the swivel belt clip.
To remove, press the release mechanism on the top
of the clip and slide the phone up and out of the
clip.
ꢂꢁ Remove the flexible rubber plug from the top of the
clip.
Getting Started
9
ꢅꢁ Lift the battery up and out of
Connecting and Removing Your Battery
the battery cavity.
ꢀꢁ Place the battery over the back
of the phone. The label on the
battery should face down.
Charging Your Battery
ꢂꢁ Insert the top portion of the
battery into the phone. The
tab on the bottom of the bat-
tery should be pointing
toward the bottom of the
phone.
To charge your battery, complete the appropriate charg-
ing procedure described in this section.
Note! Fully charge the battery before you use your phone.
The label on your phone box identifies the charger and
battery included in the package.
ꢃꢁ Press down until you hear a
click.
Note! Never attach the charger to a phone that does not have a
battery installed.
Charge-Only Mode
If your phone is Off, attaching the charger will cause the
phone to activate in charge-only mode. When this mode
is activated the message &HARGINGꢀONLY appears in
the display. Your phone is now fast (rapid) charging the
battery.
ꢄꢁ Remove the battery by push-
ing in on the tab of the bat-
tery with your thumb.
Note!
You cannot make or receive calls when your phone is in
charge-only mode.
Slow (Trickle) Charging a Deeply Discharged Battery
The battery may become deeply discharged (for exam-
ple, when the battery is stored for a long period). As a
ꢅꢆ
*HWWLQJꢁ6WDUWHG
result, the phone may not activate charge-only mode
when the charger is connected.
Rapid Charger
The rapid charger supplies power
to charge your battery while the
battery is attached to your phone.
If your phone is On, it can receive
calls while using the rapid charger.
ꢀꢁ Attach the charger to the phone for several hours to
slowly (trickle) charge the battery.
ꢂꢁ After trickle charging the battery for several hours
the phone should activate the charge-only mode
automatically.
ꢃꢁ Continue charging the phone until the battery is
To charge your battery using the
rapid charger:
fully charged.
Note! If the phone is powered On, the battery icon is replaced
ꢀꢁ Plug the charger into a standard
by the
icon once the battery is fully charged.
wall electrical outlet.
Note! If the phone is in charge-only mode, Chargi ng Com-
pl eteappears in the display when the battery is fully
charged.
ꢂꢁ Hold the phone with the dis-
play and keypad facing up.
ꢃꢁ Hold the small plug on the
charger cord so the lightning
bolt symbol is up.
Selecting Your Charger
ꢄꢁ Align the small plug on the
charger cord with the connec-
tor on the bottom of your phone. The connector on
the phone is above the lightning bolt symbol.
Your phone is packaged with one of the following bat-
tery chargers:
Note! Do not twist while inserting or removing the small
• Rapid charger
• Travel charger
• Desktop charger
plug on the charger cord!
ꢅꢁ Press the plug into the connector until the plug
“snaps” into place.
Note! To disconnect the charger, lift the plug connected to the
phone upwards and pull it out.
Getting Started
11
ꢆꢁ Continue charging the phone until the battery is
Note! Do not twist while inserting or removing the small
fully charged.
plug on the charger cord!
Note! If the phone is powered On, the battery icon is replaced
ꢅꢁ Align the small plug on the charger cord with the
connector on the bottom of your phone. The con-
nector on the phone is above the lightning bolt sym-
bol.
by the
icon once the battery is fully charged.
Note! If the phone is in charge-only mode, Chargi ng Com-
pl eteappears in the display once the battery is fully
charged.
ꢆꢁ Press the plug into the connector until the plug
“snaps” into place.
Travel Charger
Desktop Charger
The travel charger supplies power to charge your battery
while the battery is attached to your phone. If your
phone is On, it can receive calls while using the travel
charger.
The desktop charger can charge a battery attached to
your phone (standing in the front compartment of the
charger) and a separate battery (in the rear compartment
of the charger). The desktop charger can also condition
the separate battery by discharging the battery com-
pletely before beginning the charging cycle.
To charge your battery using the travel charger:
ꢀꢁ Connect
the appro-
priate AC
Connecting the Power Cord to the Desk-
top Charger
To connect the charger plug to the desktop charger:
power cord
and phone
charging
cord to the
travel charger.
ꢀꢁ Using the lightning bolt symbols as your guide,
align the small plug on the power cord with the
receptacle on the back of the desktop charger (see
diagram on previous page).
ꢂꢁ Plug the AC power cord into a standard electrical
wall outlet.
ꢂꢁ Hold the small plug with the lightning bolt symbol
facing up, and press the plug into the receptacle on
the back of the desktop charger until the plug
“snaps” into place.
ꢃꢁ Hold the phone with the display and keypad facing
up.
ꢄꢁ Hold the small plug on the charger cord so the light-
ning bolt symbol is up (see diagram on previous
page).
ꢅꢀ
*HWWLQJꢁ6WDUWHG
Note! Do not twist while inserting or removing the small
Charging a Separate Battery
ꢀꢁ Insert the battery into
the rear compartment of
plug on the charger cord!
ꢃꢁ Plug the AC adapter on the power cord into a wall
the desktop charger.
outlet.
ꢂꢁ The desktop charger’s
rear indicator light
comes on red when the
battery is properly
seated in the rear com-
partment.
Charging a Battery Attached to Your
Phone
If your phone is On, you can make and receive calls
while using the desktop charger.
To charge the battery using
the desktop charger:
ꢃꢁ Remove the battery from the desktop charger when
the rear indicator light turns green, which indicates
that the battery is fully charged.
ꢀꢁ Insert your phone into
Note! You can charge two batteries at the same time (one bat-
tery attached to your phone and placed in the front
compartment and another battery in the rear compart-
ment).
the front compartment of
the desktop charger.
The light on the right front corner of the desktop
charger comes on red when the phone is properly
seated in the desktop charger, and the phone’s dis-
play indicates that the battery is charging.
Conditioning Your Battery
The rear slot of the desktop charger can be used to con-
dition a battery by fully discharging the battery and then
charging the battery to full capacity. Conditioning helps
prevent the memory effect that can result from repeat-
edly charging a battery before the battery is fully dis-
charged.
ꢂꢁ Remove your
phone from the
desktop charger
when the light
turns green,
which indicates
that the battery
attached to your
phone is fully
charged.
Note! Only the rear slot on the desktop charger can be used to
condition a battery.
ꢀꢁ Insert the battery into the rear compartment of the
desktop charger.
Getting Started
13
ꢂꢁ Press the light on the right rear side of the desktop
charger. The light remains a steady orange while the
desktop charger discharges the battery. It can take
anywhere from two to six hours to discharge the
battery, depending on the battery type.
Note! The light turns a steady red when the desktop charger
begins charging the battery.
ꢃꢁ Remove the battery from the desktop charger when
the light turns green, which indicates that the bat-
tery is fully charged.
ꢅꢂ
*HWWLQJꢁ6WDUWHG
Learning About Your Mobile Phone
Your mobile phone offers the latest in TDMA technol-
ogy, operating in digital and analog modes.
• Speed dial for 99 phone numbers
• Super dial for 9 phone numbers
• 40-number incoming call log
• 40-number outgoing call log
Highlights of Your Mobile Phone
• 25 Ring Sounds (with musical ring options)
• Text message service with quick call-back
• Storage for 2KB of text messages
• Quick access to voice mail service
• Storage for two calling card numbers
• Customizable greeting
Design
• Small, contoured, and light-weight
• Full graphics display
• Active flip (answers and ends calls)
• Easy-to-use keypad layout
• Auto Area Code for roaming
• Side keys for ringer mute and volume control
• Menu navigation keys (Ñ Ô) on the keypad
• Adjustable ring volume
• Time/Date function (system dependent)
• Call restriction capability
• Call duration reminder
• Vibrating call alert
• Security PIN code (four digits)
• Digital voice encryption
• Missed calls indicator
• Voice mail waiting icon that displays the number of
new voice mail messages
• Nine user-definable profiles
• Call Screening
• Lighted display
• Phone Groups for phonebook organization
• Data/Fax capability (with an accessory package)
• Phone menu available in up to five languages
Features
• Storage for 250 phone numbers
Learning About Your Mobile Phone
15
The Parts of Your Phone
The following is a list of the terms used in this user’s
guide to describe your Ericsson mobile phone:
1
ꢀꢁ Antenna
2
ꢂꢁ Indicator Light
ꢃꢁ Earpiece
3
4
ꢄꢁ Upper Side Key
ꢅꢁ Lower Side Key
ꢆꢁ Display
5
6
7
8
10
ꢇꢁ <(6 Key
9
11
ꢈꢁ 12 Key (press and hold to turn power On or Off)
ꢉꢁ Down Arrow
ꢀꢊꢁ Up Arrow
12
13
ꢀꢀꢁ Clear (&/5) Key
ꢀꢂꢁ Keypad
ꢀꢃꢁ Battery
ꢀꢄꢁ Charger and Handsfree Connectors
ꢀꢅꢁ Flip
14
15
ꢅꢃ
/HDUQLQJꢁ$ERXWꢁ<RXUꢁ0RELOHꢁ3KRQH
ꢅꢁ Active Profile Icon shows if a user-customizable
profile has been activated (Normal, Data/Fax,
Handsfree, Meeting, Weekend, or Travel). Profiles
are used to turn on/off certain phone settings to suit
a particular environment.
Phone Display Icons and Display Indicators
Phone Display Icons
The following icons are used to display the status of your
ꢆꢁ Battery Icon shows the relative strength of your
battery. A full icon indicates a fully-charged battery.
If the phone is connected to external power and the
battery is charging, the display will alternate
phone:
ꢀꢁ Voice Mail Waiting Icon
1
5
2
3
4
ꢂꢁ New Text Mail Icon
ꢃꢁ Keypad Locked Icon
ꢄꢁ Ringer Silent Icon
ꢅꢁ Active Profile Icon
ꢆꢁ Battery Icon
between the battery icon (
power icon ( ).
) and the external
8
7
6
ꢇꢁ Digital/Analog Channel Indicator shows whether
the phone is currently operating in digital or analog
mode.
ꢇꢁ Digital/Analog Channel Indicator
ꢈꢁ Signal Strength Icon shows the relative signal
strength from the mobile system. More bars indicate
a stronger signal.
ꢈꢁ Signal Strength Icon
Display Indicators
Indicator Light Functions
ꢀꢁ Voice Mail Waiting Icon indicates the number of
The color and state of the indicator light on top of your
phone indicates the following conditions:
voice mail messages that have not been heard.
ꢂꢁ New Text Mail Icon indicates the number of text
messages that have not been read.
• Slow Flashing Green: Phone is in standby mode.
ꢃꢁ Keypad Locked Icon indicates that pressing the
keys on the keypad has no effect. This eliminates the
possibility of accidentally pressing keys.
• Rapid Flashing Green: Phone is receiving a call.
• Steady Green: Phone is receiving power from an
external source, such as a travel charger.
ꢄꢁ Ringer Silent Icon indicates that your phone will
not make any keypad or ringing sounds. If activated,
the vibrator will continue to operate.
• Flashing Red: Low battery power alert.
• Flashing Orange: Phone is in standby mode, and
the vibrate alert is set to Vibrate Only.
Learning About Your Mobile Phone
17
Key Functions
• Press and hold from the Standby screen to enter
the quick-access menu for profile activation.
• Press to enter the main menu.
• Press to scroll up through menus and menu set-
ting selections when your phone is in menu
mode, or to scroll through stored numbers when
you are recalling numbers from your phonebook.
• Press to scroll up through messages when view-
ing text messages.
Up
Arrow
• Press to answer a call.
• Press to make a call after entering a phone num-
ber.
• Press to store menu settings.
• Press (from the Standby screen) for the outgoing
call log.
YES
• Press and hold to scroll up through a message,
one screen at a time, when viewing text messages.
• Press and hold to move the cursor to the left
while in number-edit mode (for example, in the
Outgoing/Incoming Call Logs, and in the Call-
back Number screen).
• Press and hold after entering a phone number to
make a calling card call.
• Press and hold (during a call) to send displayed
numbers as tones.
• Press to bypass preset stops in stored number
sequences.
• Press to enter incoming call log if missed calls
text indicator is displayed.
• Press and hold from the Standby screen to recall
a phone number from your Phonebook.
• Press to enter the main menu.
• Press to scroll down through menus and menu
setting selections when your phone is in menu
mode, or to scroll through stored numbers when
you are recalling numbers from your phonebook.
• Press to scroll down through messages when
viewing text messages.
Down
Arrow
• Press and hold to turn your phone On or Off.
• Press to end a call.
• Press to exit a menu without saving changes
made in the menu.
• Press during an incoming call to mute the ringer.
• Press to clear the current display text.
• Press to return to the Standby screen.
NO,
Power On,
Power Off
• Press and hold to scroll down through a message,
one screen at a time, when viewing text messages.
• Press and hold to move the cursor to the right
while in number-edit mode (for example, in the
Outgoing/Incoming Call Logs, and in the Call-
back Number screen).
ꢅꢄ
/HDUQLQJꢁ$ERXWꢁ<RXUꢁ0RELOHꢁ3KRQH
• Press the upper side key to temporarily mute the
ring tone when receiving a call.
• Press to increase the earpiece volume during a
call.
• Press to illuminate the back light (when the flip
is open).
• Press to erase the last digit entered on the display.
• Press and hold to clear all digits or letters you
entered.
• Press and hold to delete numbers in the Phone
Lists.
• Press and hold during a call to mute the micro-
phone. After the microphone is muted, press and
hold to disable the microphone mute.
• Press to delete a selected text message when you
are reading text messages.
CLR
Upper
Side
Key
• Press the lower side key to temporarily mute the
ring tone when receiving a call.
• Press to decrease the earpiece volume during a
call.
• Press to illuminate the back light (when the flip
is open).
Lower
Side
Key
• Press and hold for quick access to voice mail.
• Press keys 1-9 for digit entry.
Note! The upper and lower side keys are only par-
tially enabled when the flip on your phone
is closed. This conserves battery power by
preventing accidental key presses when your
phone is not in use.
• Press and hold keys 1-9 for Super Dial.
• Press keys 1-9 for text-entry into the Phone Lists
or to customize the greeting.
• Press * to toggle between uppercase and lower-
case letters while entering text.
Digit
Keys
• Open to answer calls and close to end calls (if the
answer option is set to flip/yes or flip/any key).
• If the flip is not enabled, close the flip to mute
the microphone during a call. After the micro-
phone is muted, open the flip to disable the
microphone mute and continue your call.
• Press # to enter symbols while entering text.
Flip
Learning About Your Mobile Phone
19
Display Messages
The phone is locked to prevent unauthorized use.
The keypad is locked to prevent accidental use.
The following are common display messages on your
mobile phone:
Your phone is receiving a call.
The icon in the upper right corner of the display
indicates that a profile is active (in this case, the
Handsfree profile is indicated by the "car" icon).
Your phone is dialing the number shown in the dis-
play.
You attempted to call a phone number that is
restricted in the Lock Dial submenu.
You have an active call.
The phone is in charge-only mode and will not
make or receive calls.
The battery is reaching its lowest operational power
level.
Battery charging is finished.
The phone ringer is muted.
The phone is searching for a mobile system.
The number of calls you have not answered.
The microphone is muted.
You have an active data/fax call.
ꢀꢆ
/HDUQLQJꢁ$ERXWꢁ<RXUꢁ0RELOHꢁ3KRQH
8
Basic Operations
Summary of Basic Operations
To Do This:
Press This:
<(6
Call the phone number shown in the display
<(6
Recall a last dialed phone number from the
Outgoing Log
To Do This:
Press This:
Turn your phone On
Press and hold 12
Press and hold 12
Lower side key
Upper side key
<(6 or open the flip
12 or close the flip
Ñ or Ô
Save the text message you are reading
Select a highlighted menu setting
Turn Keypad Lock On or Off
Turn Phon e Sil en t O n o r Off
Press and hold <(6
Turn your phone Off
<(6
Decrease ear volume during a call
Increase ear volume during a call
Answer a call
Ñ or Ô then *
Ñ or Ô then #
Call the phone number in the display using Press and hold <(6
End a call
calling card
Access the main menu
Send DTMF tones during a call
Mute your voice during a call
Press and hold <(6
Access the main menu during call
Go back one level in menu mode
Exit menu mode from any menu level
Scroll through menus or menu settings
Erase the last digit or letter entered
Erase all digits or letters entered
Enter Incoming Log
Ñ or Ô
Press and hold &/5
or close the flip (if it is not
enabled)
12
&/5
Mute the ringer when a call is received
Quick access to phonebook
12 or either side key
Press and hold Ô
Press and hold Ñ
Ñ or Ô
&/5
Quick access to profile activation
Quick access to voice mail
Press and hold &/5
<(6 from the Missed Calls
Indicator screen
Press and hold
Basic Operations
21
Latin American Spanish, Brazilian Portuguese, and
Hebrew.
Turning Your Phone On and Off
Note! The available languages may vary by region.
After you have installed a fully charged battery in your
phone, turn your phone On by pressing and holding 12
until your phone sounds a beep.
ꢆꢁ Press <(6 to select the language.
Sel ecti on Stored!appears in the display.
Note! If you have the vibrate option activated, the phone will
ꢇꢁ Press 12 to return to the previous screen.
also briefly vibrate.
ꢈꢁ Press &/5 to return to the Standby screen.
To turn your phone Off, press and hold 12 until your
phone sounds a beep and turns off.
Setting the Ring Sound
Setting the Display Language
To select the ring sound for your mobile phone:
Ñ or Ô ꢁꢃꢂ
You can set the language used to display the menus for
your mobile phone.
ꢀ
To change the display language:
ꢀꢁ Turn your p hone On.
ꢂꢁ Press Ñ or Ô from the Standby screen to access the
ꢀ
Ñ or Ô ꢀꢃꢁ
main menu.
ꢃꢁ Press ꢁ to display the SOUNDS Menu.
ꢄꢁ Press ꢂ to display the Ring Sound submenu.
ꢅꢁ Ri ng Soundappears in the display.
ꢀꢁ Turn your p hon e O n .
ꢂꢁ Press Ñ or Ô from the Standby screen to access the
main menu.
ꢆꢁ Press the Ñ or Ô repeatedly until the appropriate
ring sound is highlighted. You will hear two ring
cycles of the each ring sound as you scroll through
the list of ring sounds.
ꢃꢁ Press ꢀ to display the SETTINGS menu.
ꢄꢁ Press ꢁ to display the Language submenu.
ꢅꢁ Press the Ñ or Ô repeatedly until the appropriate
language option is highlighted. The language
options are American English, Canadian French,
ꢀꢀ
%DVLFꢁ2SHUDWLRQV
ꢇꢁ When the appropriate ring sound is highlighted,
press <(6. Sel ecti on Stored!appears in the
display.
Making a Call
ꢀꢁ Enter the phone number you want to call by press-
ꢈꢁ Press 12 to return to the previous screen.
ing the numeric keys. The phone number is shown
in the display.
ꢉꢁ Press &/5 to return to the Standby screen.
Note! You can press &/5 to erase one or more digits in the dis-
play, or press and hold &/5 to erase all digits.
Setting the Ring Volume
ꢂꢁ Press <(6. Connecti ng is shown in the display
while your phone accesses the mobile network.
To select the ring volume for your mobile phone:
Ô or Ñ ꢁꢃꢄ
ꢃꢁ When the call is connected, I n Usewill display on
your screen and your call timer will indicate the
duration of your call. The phone number that you
dialed will remain on your screen.
ꢀ
ꢀꢁ Turn your p hon e O n .
ꢂꢁ Press Ñ or Ô from the Standby screen to access the
main menu.
ꢃꢁ Press ꢁ to display the SOUNDS Menu.
ꢄꢁ Press ꢄ to display the Ring Volume submenu.
ꢅꢁ Ri ng Vol umeappears in the display.
ꢄꢁ When you finish your conversation, press 12 or
close the flip to end the call.
ꢆꢁ Press the Ñ or Ô repeatedly until the appropriate
ring volume is highlighted. You will hear two ring
cycles of the currently selected ring sound as you
scroll each volume selection.
Auto Retry
If you try to place a call and the mobile network is not
available, your phone automatically redials the phone
number every 15 seconds for three minutes if the Auto
Retry feature is enabled. See the section on Auto Retry
in the “Menu Descriptions” chapter.
ꢇꢁ When the appropriate ring volume is highlighted,
press <(6. Sel ecti on Stored!appears in the
display.
ꢈꢁ Press 12 to return to the previous screen.
ꢉꢁ Press &/5 to return to the Standby screen.
Basic Operations
23
Note! Do not use the 12 key to mute the ringer if the flip is
closed and active. Opening the flip will answer the call.
Pressing 12 will end the call.
Answering a Call
When your phone
receives a call, the ring
tone sounds (unless you
Muting the Microphone During a Call
have disabled it through
To mute the microphone during a call, press and hold
the SOUNDS menu),
the &/5ꢀkey.
the words I ncomi ng Cal l flash in the display, the dis-
play and keypad back light flash, and the indicator light
on top of the phone rapidly flashes green. If you have
Caller Number Identification (Caller ID) service from
your service provider, the caller's phone number is
shown in the display. If the caller's phone number is
stored in the phonebook, the name stored with the
phone number is also shown when the call is received.
Mi c Mutedappears in the display when the call is
muted. Repeat this procedure to return to your call.
Note! If your flip has not been set to answer or end the call,
then closing the flip mutes the call, and opening the flip
disables the mute and resumes your call.
Increasing or Decreasing Ear Volume During a Call
ꢀꢁ Open the flip to answer the call. If the flip has been
deactivated in the ANSWER OPT menu, answer
the phone by opening the flip and pressing <(6.
The words I ncomi ng Cal l are replaced by the
call timer display.
To adjust the ear volume during a call:
• Press the upper side key to increase the ear volume.
• Press the lower side key to decrease the ear volume.
ꢂꢁ When you finish your conversation, press 12 or
Call Waiting
close the flip to end the call.
If you have call waiting service from your service pro-
vider, press <(6 to answer a call when you receive the call
waiting signal. You can switch between the two calls by
pressing <(6. Do not press 12 until you are ready to end
both calls.
Temporarily Muting the Ring Tone
To temporarily mute the ring tone without answering
the call, press either the upper or lower side key, or if the
flip is open, press 12ꢅ
I ncomi ng Cal l is still shown in the display, and you
can still answer the call by opening the flip or by press-
ing <(6.
ꢀꢂ
%DVLFꢁ2SHUDWLRQV
You can delete a phone number from the Outgoing Log
by pressing and holding &/5 while the phone number is
shown in the display.
Unanswered Calls
Your phone's display shows the number of calls you have
received but did not answer. You can clear the number
from the display by pressing any key or by turning the
phone Off.
Super Dial
The Super Dial feature, when enabled through the
CALL MANAGER menu, lets you use one-touch dial-
ing for phone numbers stored in phonebook positions 1
through 9.
If Caller Number Identification is available from your
carrier, unanswered calls will be stored in the Incoming
Log of the PHONE LISTS menu. To quickly access
your Incoming Log, press <(6 from the Missed Call
Indicator screen shown below.
To use Super Dial, press and hold the numeric key (ꢆꢃꢇꢃꢈ)
that corresponds to the phonebook position containing
the phone number you want to call. For example, if you
want to call the phone number stored in phonebook
position 7, press and hold ꢉ.
Note! When the flip is open, pressing the upper or lower side
key will turn on the back light without clearing the dis-
play. This is useful at night when checking for missed
calls.
Speed Dial
The Speed Dial feature, when enabled through the
CALL MANAGER menu, lets you quickly dial a phone
number stored in your phonebook.
Redialing the Last Phone Number You Called
Your telephone temporarily stores phone numbers you
have previously called. To view these phone numbers,
press <(6ꢀfrom the Standby screen. The last phone
number you called is shown in the display. Press Ñ or Ô
to scroll through the other phone numbers. You can
place a call to a phone number shown in the display by
pressing <(6. You can also view the last phone numbers
you called through the Outgoing Log of the PHONE
LISTS Menu.
To use Speed Dial, enter the number of the phonebook
position containing the phone number you want to call,
then press <(6. For example, if you want to call the
phone number stored in phonebook position 12, press ꢆ,
press ꢂ and press <(6. Positions 1-99 can be used to store
Speed Dial phone numbers.
Stop and Pause Dialing
Stop and pause dialing lets you enter groups of numbers
with stops and pauses between each group of numbers.
This feature is useful when you need to dial a phone
Basic Operations
25
number and then another number, such as an access
number for an answering machine or voice mail system.
You can also store groups of numbers, which can include
stops and pauses in a phonebook position. You can then
dial the numbers by entering the phonebook position
and pressing <(6 until the phone dials the phone num-
ber.
Stop Dialing
A stop causes the phone to stop transmitting numbers
until you press <(6. You can enter a stop in a series of
digits by pressing and holding ꢊ until
display.
is shown in the
Emergency Calls
Your phone was programmed with an emergency num-
ber (911) when it was manufactured. The programmed
emergency number can be dialed and called at any time,
if there is an emergency system available, regardless of
any call restrictions you have set through the CALL
MANAGER menu.
Pause Dialing
A pause temporarily suspends transmitting numbers for
approximately two seconds before sending the next
series. You can enter a pause in a series of digits by press-
ing and holding ꢋ until
is shown in the display.
For example, if your office has a voice mail system that
requires you to dial a phone number, followed by your
extension, followed by an access code, you could enter
Note! The Keypad Lock feature prohibits emergency number
access (911) until unlocked.
A representative from your service provider or the retail
outlet where you purchased your phone should be able
to change the emergency number in your phone if a 911
system is not available in your service area.
the following: 555-1111 2222 33333 where 555-
1111 is the phone number to enter your voice mail sys-
tem.
is a stop. 2222 is your extension.
is a pause.
33333 is your access code.
If police, fire, or medical help is needed, dial 911 or your
emergency number and press <(6. Tell the dispatcher
that you are calling from a mobile phone. Mobile 911
calls do not automatically provide emergency personnel
with your name, location, or phone number. The dis-
patcher will want to know the following:
When you press <(6, your phone dials the phone num-
ber and then stops transmitting tones. When your voice
mail system asks for your extension you would press <(6
to transmit your extension. The access code is sent after
the pause. If the timing in your voice mail system
requires a pause longer than two seconds, you could
enter a stop instead of the pause, or use multiple pauses.
ꢀꢁ Your name and mobile phone number.
ꢂꢁ The nature of the emergency.
ꢀꢃ
%DVLFꢁ2SHUDWLRQV
ꢃꢁ If police, fire, or medical assistance is needed.
Low Battery Power Alert
ꢄꢁ The exact location of the emergency, including cross
streets, mileposts, or landmarks.
The low battery alert sounds when your battery is reach-
ing its lowest operational power level. The words Low
Batteryflash in the display, and the indicator light on
top of your phone flashes red. When this happens, leave
your phone turned on. The phone discharges the battery
and then automatically turns off. You should charge the
battery within 24 hours after a complete discharge so
that the battery can charge to full capacity.
ꢅꢁ How many people are involved, their condition, and
if help is being administered.
International Calls
If allowed by your service provider, you can place inter-
national calls with your phone just as you would from
any other phone. If you have difficulty completing inter-
national calls, check with your service provider for infor-
mation.
Security Code
Your phone has a security code that you must enter to
gain access to certain functions, such as call restrictions
and calling card numbers. The factory-programmed
code is 0000. You can change this code to provide maxi-
mum security for your phone. See the section on your
security code in the “Menu Descriptions” chapter. If you
forget your security code, contact your service provider
for assistance.
Caller Number Identification
If your service provider has Caller Number Identifica-
tion (Caller ID) service, your phone shows the phone
number of an incoming call in the display. Also, if the
phone number is one that you have stored in your
phonebook with a name, the name is shown with the
phone number when your phone rings. If the Caller ID
information is not available, the message NO I Dis
shown in the display. The word Pri vatemay be
shown if the Caller ID is restricted by the service pro-
vider.
Basic Operations
27
ꢀꢄ
%DVLFꢁ2SHUDWLRQV
Using Menus
Read this chapter thoroughly to understand how to use
ꢀꢁ Press Ñ or Ô from the Standby screen to access the
your phone’s menus, how to navigate through the menu
main menu.
system, and how to change the menu settings.
ꢂꢁ Press <(6 from the main menu when the menu that
you want to open is highlighted.
Your phone's menus are an easy way for you to:
ꢃꢁ Press Ñ or Ô to scroll through the list of submenus.
• Store and recall phone numbers from your phone-
book
ꢄꢁ When the submenu that you want to open is high-
lighted, press <(6. The list of settings for the sub-
menu appears in the display.
• Read text messages and check voice mail
• Set up call features
ꢅꢁ You can scroll through the list of settings by pressing
• Change ring sound and other sound settings
• Change other settings for your phone
Ñ or Ô.
ꢆꢁ To back up to the list of submenus, press 12. Press-
ing 12 from a list of submenu settings returns you
to the main menu list. Pressing &/5 from any menu
level, exits the menu and returns your phone to the
Standby screen.
Opening Menus
Press Ñ or Ô from the Standby screen to access the main
menu.
Changing Settings
Press 12 to return to the pervious screen.
Press &/5 to return to the Standby screen.
Open the menus as described in the previous section,
then:
ꢀꢁ Press Ñ or Ô to scroll through the list until the set-
Opening Submenus
ting you want to change is highlighted.
ꢂꢁ Press <(6. The choices available for the setting are
To open one of the submenus:
shown in the display. The currently active choice is
Using Menus
29
indicated by a filled radio button ( ). Some set-
tings have two choices, such as On and Off for the
Speed Dial setting in the CALL MANAGER
menu. Other settings have a list of choices, such as
the Ring Volume setting in the SOUNDS menu.
Quick Menu Access
If you know the numbers associated with the menu you
want to change, you can quickly access that submenu
and setting by pressing Ñ or Ô, followed by the number
of the main menu, and then the number of the sub-
menu.
ꢃꢁ Press Ñ or Ô to scroll through the list of choices
until the choice you want is highlighted. If the set-
ting has only two choices, press either of these keys
to toggle between the two choices. The active choice
is indicated with a filled radio button.
For example, suppose you want to change the sound the
keys on your phone make when you press them. If the
SOUNDS menu is number 5, and the Key Sound sub-
menu is number 6, you could press Ñ or Ô, then ꢁ, thenꢃ
ꢌ to go directly to the choices for Key Sound.
ꢄꢁ Press <(6 to store the choice you selected or press 12
if you want to exit the menus without storing any
changes you have made. If you store your changes,
Sel ecti on Stored!will appear briefly in the
display. The list of submenus is then shown in the
display.
Quick access shortcuts to your phone’s menus and sub-
menus are identified using the hourglass symbol (ꢀ).
Menu Overview
Exiting the Menu
An illustration of your phone’s menu system is shown on
the inside of the front cover of this user’s guide.
Press 12 at any menu level to go back one level. To exit
to the Standby screen, continue pressing 12. Pressing
&/5ꢀfrom any menu level returns your phone to the
Standby screen.
A summary of the basic operations for your phone is
provided in this user’s guide in the “Basic Operations”
chapter.
If you receive a call while you are in one of the menus,
the phone automatically exits menu mode to allow you
to answer the call.
ꢇꢆ
8VLQJꢁ0HQXV
Menu Descriptions
The main menu has six icons that display the top-level
ꢀꢁ Press Ñ or Ô to scroll through menus, functions in
menu options. The corresponding option title of the
selected option is displayed below the menu tabs when
highlighted. Each menu is represented by an icon.
menus, and settings in a function.
ꢂꢁ Press <(6 to select the menu, function, or setting
that is highlighted.
ꢃꢁ Press 12 to go back one level in the menu structure.
ꢄꢁ Press &/5 to exit the menus completely.
Option 1 is the PHONE LISTS menu.
Option 2 is the MESSAGES menu.
Option 3 is the CALL MANAGER menu.
Option 4 is the SETTINGS menu.
Option 5 is the SOUNDS menu.
Phone Lists Menu
ꢀ
Ñ or Ô 1
The PHONE LISTS menu contains the following
choices for storing, organizing, and recalling Phone Lists
and call information.
Option 6 is the PROFILES menu.
Note! The profile icon ( ) refers to submenus that are pro-
file-dependent. Profile-dependent submenus may be
customized for every profile to suit a particular environ-
ment. Refer to “Profiles Menu” on page 43.
Add Entry
The Add Entry submenu allows you to store a phone
number and an accompanying name in your phone-
book.
Accessing Menus
Recall Entry
The Recall Entry submenu allows you to recall a phone
number by the name stored with the phone number or
by the phonebook position number. You can also access
Press Ñ or Ô to access the menus:
Menu Descriptions
31
the Recall Entry submenu by pressing and holding Ô
from the Standby screen.
Incoming Log
If you have Caller ID service from your service provider,
the Incoming Log submenu lists the last 40 calls
received with caller ID (the latest call appears first). To
dial the phone number shown in the display, press <(6.
Phone Groups
The Phone Groups submenu allows you to organize the
members of your phonebook into categories. Each cate-
gory can then have a ring sound associated with it and
can be used for call screening if your network supports
Caller ID. Refer to the Screen Calls section later in this
chapter for more information about call screening. The
10 options for Phone Groups are Personal, Family,
Friends, Business, Work, Team, School, Group A,
Group B, and Group C.
If Caller Number Identification is available from your
carrier, unanswered calls will be stored in the Incoming
Log of the PHONE LISTS menu. To quickly access
your Incoming Log, press <(6 from the Missed Call
Indicator screen shown below.
Use the Ñ or Ô keys to scroll through the last 40
received calls. If the received number is stored in the
phonebook with a name, the name is also shown in the
display.
Outgoing Log
The Outgoing Log submenu allows you to view and
edit the last 40 phone numbers that you have called. The
cursor is at the left and can be moved by pressing and
holding the Ñ or Ô key. The Outgoing Log submenu
lists the last 40 numbers dialed. The most recently dialed
number appears first.
You can also access the Outgoing Log by pressing <(6
from the Standby screen. Use the Ñ or Ô keys to scroll
through the last 40 numbers dialed. If the last dialed
number is stored in the phonebook with a name, the
name is also shown in the display. To dial the phone
number shown in the display, press <(6.
The cursor is at the left and can be moved by pressing
and holding the Ñ or Ô key.
Calling Card 1 and Calling Card 2
The Calling Card 1 and Calling Card 2 submenus
allow you to store calling card numbers to use for mak-
ing long distance calls.
32
Menu Descriptions
Note! You will be prompted to enter your security code to
enter the Calling Card 1 and Calling Card 2 sub-
menus.
ꢀꢂꢁ Press <(6 to store the number.
Changing the Domestic or International
Calling Pattern
Setting Up Your Calling Cards
To set up your calling cards, make sure you have the
Calling Card Access Numbers (numbers provided by
your long distance carrier) and the Verification Numbers
(numbers you must enter to allow the calling card call to
be completed)
If your long distance carrier requires a unique dialing
sequence, you may need to change the calling pattern.
The calling pattern determines when the numbers are
transmitted by your phone. The default calling pattern
is:
• Access number
• Stop
To set up your calling cards, complete the following
steps.
• Verification number
• Stop
ꢀꢁ Press Ñ or Ô from the Standby screen to access the
main menu.
• Area code and phone number
To change the calling pattern:
ꢂꢁ Press <(6 when the PHONE LISTS menu is high-
lighted.
ꢃꢁ Press Ñ or Ô until the Calling Card 1 or Calling
ꢀꢁ After Step 11 under Setting Up Your Calling Cards,
press Ô until Domesti cor I nternati onal is
highlighted.
Card 2 submenu is highlighted.
ꢄꢁ Press <(6 to open one of the Calling Card sub-
menus.
ꢂꢁ Press <(6 to select the highlighted option.
You are prompted to enter your security code.
ꢃꢁ Press Ô to scroll through the calling pattern order.
ꢅꢁ Press Ñ or Ô until Veri f Numberis highlighted.
ꢆꢁ Press <(6 to select Veri f Number.
ꢇꢁ Enter the calling card verification number.
ꢈꢁ Press <(6 to store the number.
ꢄꢁ To change the calling pattern order, press Ô until
the the setting you want to change is highlighted.
ꢅꢁ Press ꢆ to scroll through the options for that setting.
ꢆꢁ When you have the calling pattern order you want,
press <(6 to store the selection.
ꢉꢁ Press Ô to highlight Access Number.
ꢀꢊꢁ Press <(6 to select Access Number.
ꢀꢀꢁ Enter the calling card access number.
Menu Descriptions
33
ꢆꢁ Press <(6 to select the card you want to use.
Placing a Calling Card Call
ꢀꢁ Enter or recall the phone number you want to call.
Phone Number
ꢂꢁ Press and hold <(6. The calling card number and
the active calling card are shown in the display.
The Phone Number submenu is used to display the
mobile phone number(s) that are programmed into your
phone.
The currently active phone number will be selected
when you enter the Phone Number submenu. To select
a different phone number, press Ñ or Ô until the num-
ber you want to select is highlighted. Press <(6 to select
the phone number.
ꢃꢁ Release the key after the number has been displayed.
ꢄꢁ If you are using stops between numbers, you must
press <(6 or any number key to send the next
sequence of numbers. If you use pauses, the num-
bers are sent automatically after the specified length
of time chosen in the Domestic or International
calling pattern.
Note! Contact your service provider to determine if your
phone supports multiple phone numbers/subscriptions.
The ability to add a second subscription is an optional
feature that may be allowed by your service provider. If
available, this offers you the option of adding a second
telephone number to your mobile phone so that it will
be more useful in areas to which you frequently roam.
Your second subscription may be obtained from your
current mobile service provider or from a second service
provider. It is particularly useful where international
roaming is not yet available. If you have multiple sub-
scriptions, you may switch phone numbers by doing the
following:
Default Card
The Default Card submenu allows you to assign one
calling card as your default calling card. To select which
calling card is your default calling card, do the following:
ꢀꢁ Press Ñ or Ô from the Standby screen to access the
main menu.
ꢂꢁ Press <(6 when the PHONE LISTS menu is high-
lighted.
ꢃꢁ Press Ñ or Ô until Default Card is highlighted.
ꢀꢁ Press Ñ or Ô from the Standby screen to access the
ꢄꢁ Press <(6 to open the Default Card submenu.
main menu.
ꢅꢁ Press Ñ or Ô until Card One or Card Twois
highlighted (the current selection will be indicated
by a filled radio button).
ꢂꢁ Press <(6 when the PHONE LISTS menu is high-
lighted.
ꢃꢁ Press Ñ or Ô until Phone Number is highlighted.
34
Menu Descriptions
ꢄꢁ Press <(6 to open the Phone Number submenu.
New Messages
The New Messages submenu allows you to view your
unread text messages if you have text message service
from your service provider. A number and the text mes-
ꢅꢁ Press Ñ or Ô until the appropriate phone number is
highlighted.
ꢆꢁ When the appropriate phone number is high-
sage icon ( ) appear in the Standby screen to indicate
the number of new unread text messages.
lighted, press <(6 to switch to that phone number.
ꢇꢁ Press 12 to return to the previous screen or press
&/5ꢃto return to Standby screen.
Old Messages
Erase All
Note! You can store specific voice mail access numbers for each
mobile phone number. Calls or edits to your voice mail
access number apply to the currently selected mobile
phone number only.
The Old Messages submenu allows you to view your
saved or previously read text messages if you have text
message service from your service provider.
Memory Used
The Erase All submenu allows you to erase all of your
previously-read unsaved text messages. You can use this
submenu if you have text message service from your ser-
vice provider.
The Memory Used submenu is used to display the
number of phonebook positions that are occupied and
the number of phonebook positions that are available.
Note! You will be prompted to enter your security code to
enter the Erase All submenu.
Messages Menu
Memory Used
ꢀ
Ñ or Ô 2
The Memory Used submenu displays the percentage of
the phone’s memory that is occupied and the percentage
of the phone’s memory that is available.
The MESSAGES menu contains choices for specifying
and accessing message services that may be available
from your service provider (for example, text messages
and voice mail).
Voice Mail
The Voice Mail submenu allows you to enter and access
your voice mail access number, if you have voice mail
service from your service provider.
Menu Descriptions
35
• Flip/<(6 key - Open the flip or press <(6ꢃto answer
calls.
Call Manager Menu
• Flip/Any key - Open the flip or press any key to
answer calls.
ꢀ
Ñ or Ô 3
• Any key - Press any key to answer calls.
• Auto answer - Call will be answered automatically
(available only with a handsfree device).
The CALL MANAGER menu allows you to view infor-
mation and establish dialing and answering preferences
for your phone (some selections available in this menu
are dependent on your service provider). It also enables
you to view and edit system options and call statistics.
Auto Area
The Auto Area submenu allows you to store an area
code that will be automatically added to the 7-digit
phone number you are dialing. Enter the area code on
the display, then select Onto activate the feature.
Last Call
The Last Call submenu indicates the approximate dura-
tion of the last call, in minutes and seconds. It resets
after 999 minutes.
The two settings for this function are On and Off. The
area code is automatically added to the phone number
you are calling when Auto Area is set to On, and you
are not in your home system.
Call Totals
The Call Totals submenu shows you the total number
of calls and the total hours and minutes that have been
used. The Call Totals timer can be reset by pressing Ô
until Reset?appears in the display. When prompted
by Reset?press <(6. Counter has been reset!
appears in the display.
Auto Prefix
The Auto Prefix submenu allows you to store a 1- to
12-digit prefix which is automatically added to the
dialed phone number. When you dial a 4- or 5-digit
phone number, the prefix is automatically added to the
phone number.
Answer Option
In order to send a number to office extensions, store the
3-digit prefix in the Auto Prefix submenu. You only
need to dial the last 4 or 5 digits of the phone number.
The Answer Opt submenu allows you to select one of
the following methods for answering calls:
•
<(6 key - Press <(6 to answer calls.
36
Menu Descriptions
For example, if you save 123 as the auto prefix and the
function is On, you can call 123-7654 by simply dialing
7654. The prefix 123 is automatically added to the
phone number after you press <(6 to dial the phone
number. The auto prefix is not added for phone num-
bers longer than 5 digits.
menu varies according to country. Selections for this
function include:
• If you select No restri cti ons, your phone has
no outgoing call restrictions.
• If you select Restri ct al l di al i ng, your
phone will only allow dialing of emergency phone
numbers.
Auto Retry
• If you select Al l ow onl y l ocal +800#, your
phone will only allow dialing of phone numbers
with up to seven digits and phone numbers with 10
or more digits that begin with 800, 888, or 877.
The phone will not allow operator access.
The Auto Retry submenu, when enabled, repeats a call
attempt every 15 seconds for up to three minutes if the
call cannot be delivered through the mobile system. The
two options for the Auto Retry submenu are On and
Off.
• If you select Al l ow onl y phonebook, your
phone will only allow calls to phone numbers stored
in your phonebook. Phone numbers cannot be
stored in your phonebook while this restriction is
enabled.
Speed Dial
Super Dial
The Speed Dial submenu allows you to dial a phone
number stored in a phonebook position by entering the
1- or 2-digit position and pressing <(6. The two
options for Speed Dial are On and Off.
• If you select Restri ct i nternati onal , your
phone will not allow dialing of phone numbers that
begin with 0, 01, and 011. The phone will not
allow operator access.
The Super Dial submenu allows you to dial a phone
number stored in phonebook positions 1 through 9 by
pressing and holding the numeric key corresponding to
the phonebook position. The two options for Super
Dial are On and Off.
• If you select Restri ct 900#, your phone will
not allow you to dial phone numbers with 10 or
more digits that begin with 900. The phone will
not allow operator access.
• If you select Restri ct cal l i ng card, your
phone will not allow the use of calling card num-
bers stored in the Calling Card 1 or Calling Card
2 submenus.
Lock Dial
The Lock Dial submenu is used to limit outgoing calls.
The functionality of the dialing options in the LOCKS
Menu Descriptions
37
Note! You will be prompted to enter your security code to
Power On Lock
enter the Lock Dial submenu.
The PowerOn Lock submenu restricts you from mak-
ing calls each time you turn the phone on. To unlock
the phone, enter the security code.
Lock Receive
The Lock Recv submenu allows you to restrict incom-
ing phone calls. The two options are Allow and Restrict.
If Restrict is selected, the phone does not ring for incom-
ing calls.
If a call is received while PowerOn Lock is active, you
must enter your security code to answer the call.
Note! You will be prompted to enter your security code to
enter the PowerOn Lock submenu.
Note! You will be prompted to enter your security code to
enter the Lock Recv submenu.
Keypad Lock
The Keypad Lock submenu restricts you from using the
keypad. The keypad remains locked until you do one of
the following:
Settings Menu
• Turn the phone off by pressing and holding 12,
and then turn the phone back on by again pressing
and holding 12.
ꢀ
Ñ or Ô 4
• Press Ñ or Ô, highlight the on or off setting you
want to choose, and press <(6 to select.
Security Code
The SecurityCode submenu allows you to gain access to
certain functions, such as call restrictions and calling
card numbers. The factory-programmed code is 0000.
You can change this code to provide maximum security
for your phone. If you forget your security code, contact
your service provider for assistance.
• Receive a call (after the call is completed, the key-
pad is returned to the locked state).
Note! The Keypad Lock feature prohibits emergency number
access (911) until unlocked.
ꢀ
Ñ or Ô and * toggles Keypad Lock
on and off.
Note! You will be prompted to enter your security code to
enter the SecurityCode submenu.
38
Menu Descriptions
If Voice Privacy is requested but not granted, your
phone sounds a warning tone indicating that Voice Pri-
vacy is not active. The tone sounds at the beginning of
the call, and then every 30 seconds during the call, as a
reminder. The three settings for the Voice Privacy func-
tion are On-no warn, On-warning, and Off.
Time/Date
Language
The Time/Date submenu allows you to retrieve the time
and date from the system, if this feature is available from
the service provider.
The Language submenu allows you to select the display
language used in the phone display. The languages vary
between markets. Your mobile phone supports Ameri-
can English, Canadian French, Latin American Spanish,
Brazilian Portuguese, and Hebrew.
Back Light
Contrast
Use the Back Light submenu to set the display and key-
pad backlighting to stay Off or to automatically turn On
for 20 seconds when a call is received or a key is pressed.
The two settings for Back Light are Auto and Off.
Greeting
The Greeting submenu allows you to enter a three-line,
42-character message (14 characters per line) that dis-
plays when you turn the phone On. The greeting func-
tion is automatically turned off if no characters are
entered. Use the keypad to enter letters, numbers, and
symbols. Refer to the section Entering Letters and Sym-
bols in the "Using the Phonebook" chapter for more
information.
Use the Contrast submenu to change the phone display
contrast setting. The five settings for the Contrast func-
tion are Very Light, Light, Medium, Dark, and Very
Dark.
System Select
The System Select submenu allows you to prioritize and
manually select the systems from which you can obtain
service. This can include your public home system as
well as private and residential systems. This function is
particularly useful if you have access to more than one
mobile system. Only systems that are currently available
can be selected. This varies depending on your geo-
graphic location. The following submenus are used to
customize your System Select options:
Voice Privacy
The Voice Privacy submenu allows you to request voice
privacy service if your service provider offers digital voice
encryption.
Voice Privacy service is not available in all areas. If voice
privacy is active, the digital voice privacy indicator text,
, is shown in the display.
Menu Descriptions
39
Find Network
Private Network
Your phone should be configured by your service pro-
vider for optimal network selection during roaming. If
your service provider allows, you can override the pre-
configured selection by doing the following:
Priority
Priority allows you to change the priority of the system
types for which your phone searches. Your default prior-
ity is (1) Public, (2) Private, and (3) Residential. This
means that your phone will look for service on a public
system first, followed by a private system, followed by a
residential system.
ꢀꢁ Press Ñ or Ô from the Standby screen to highlight
the SETTINGS menu.
ꢂꢁ Press <(6 to open the SETTINGS menu.
ꢃꢁ Press Ñ or Ô until the System Select submenu is
To reset your Priority options, do the following:
highlighted.
ꢀꢁ Press Ñ or Ô from the Standby screen to highlight
ꢄꢁ Press <(6 to open the System Select submenu.
ꢅꢁ Press Ñ or Ô until Find Network is highlighted.
ꢆꢁ Press <(6 to select Find Network.
the SETTINGS menu.
ꢂꢁ Press <(6 to open the SETTINGS menu.
ꢃꢁ Press Ñ or Ô until the System Select submenu is
ꢇꢁ Press Ñ or Ô until the desired system is highlighted.
highlighted.
ꢈꢁ When the desired system is highlighted, press <(6 to
ꢄꢁ Press <(6 to open the System Select submenu.
ꢅꢁ Press Ñ or Ô until Priority is highlighted.
ꢆꢁ Press <(6 to select Priority.
switch to that system.
ꢉꢁ Press 12 to return to the previous screen or press
&/5 to return to the Standby screen.
ꢇꢁ Press Ñ or Ôꢃto highlight a specific service.
Home Only
ꢈꢁ Press ꢆ to set the priority of the highlighted item to
first. Press ꢂ to set the priority of the highlighted
item to second. Press ꢄ to set the priority of the
highlighted item to third.
The availability of the Home Only menu item is depen-
dent on your cellular provider’s phone setup. Home
Only allows your phone look only for your home cellu-
lar system when you turn on the phone. The phone does
not search for other systems if your home system is not
available.
Search
Search allows you to manually switch to another system.
Your phone will begin to search for all systems that have
been programmed into your phone. Once the search is
complete, you will be provided with a list of available
40
Menu Descriptions
and unavailable systems. If you want to switch to
another system, do the following:
ꢅꢁ Press Ñ or Ô until Add Systems is highlighted.
ꢆꢁ Press <(6ꢃto select Add Systems.
ꢀꢁ Press Ñ or Ô from the Standby screen to highlight
ꢇꢁ Press Ñ or Ô until the system that you want to add
the SETTINGS menu.
to your phone’s memory is highlighted.
ꢂꢁ Press <(6 to open the SETTINGS menu.
ꢈꢁ Press <(6 to add the highlighted system to your
phone’s memory.
ꢃꢁ Press Ñ or Ô until the System Select submenu is
highlighted.
Note! You can press 12 at any time to stop the Search and
return to the Standby screen.
ꢄꢁ Press <(6 to open the System Select submenu.
ꢅꢁ Press Ñ or Ô until Manual Search is highlighted.
ꢆꢁ Press <(6ꢃto select Manual Search.
Sounds Menu
ꢇꢁ Press Ñ or Ô until a specific system is highlighted.
ꢈꢁ Press <(6 to select the highlighted system.
ꢀ
Ñ or Ô 5
Note! You can press 12 at any time to stop the Search and
return to the Standby screen.
The SOUNDS menu contains the following choices for
setting the different volumes and sounds for ringing,
keypad, earpiece, and handsfree kits.
Add Systems
Add Systems allows you to add new systems to the pro-
grammed list of systems. When this feature is selected,
the phone will begin searching for all systems that are
available. To add one of the systems to your phone’s
memory, do the following:
Phone Silent
When Phone Silent is enabled, your phone does not
make any keypad or ringing sounds. The icon ( ) is
shown in the display when the phone is in silent mode.
The vibrator will continue to operate when Phone
ꢀꢁ Press Ñ or Ô from the Standby screen to highlight
the SETTINGS menu.
ꢂꢁ Press <(6 to open the SETTINGS menu.
ꢃꢁ Press Ñ or Ô until the System Select submenu is
highlighted.
ꢄꢁ Press <(6 to open the System Select submenu.
Menu Descriptions
41
Silent is selected. The two options for Phone Silent are
adjust the volume during a call by using the side volume
keys. There are six volume levels.
On or Off.
Key Sound
ꢀ
Ñ or Ô and # toggles Phone Silent
The Key Sound submenu allows you to choose the
sound made when you press keys. The four options for
Key Sound are Click, Continuous, Burst, or Silent.
on and off.
Ring Sound
Ring Volume
The Ring Sound submenu allows you to choose the
type of sound or melody for the ringer. Each sound or
melody is demonstrated as you scroll through the selec-
tions. There are 25 pre-defined ring sounds.
Access Tone
The Access Tone submenu allows you to sound three
short beeps to indicate your outgoing call has been con-
nected to the mobile system. The two options for Access
Tone are On and Off.
The Ring Volume submenu allows you to set the level
of the ring volume from Extra-Low, Low, Medium,
High, Escalating, or Off. The Escalating volume setting
rises in steps from the lowest to the highest level as the
phone continues to ring.
Minute Alert
Tone Send
The MinuteAlert submenu, when turned On, times
your calls by sounding a short beep in the ear piece or
handsfree loudspeaker about 10 seconds before each full
minute during a call. The two options for MinuteAlert
are On and Off.
Vibrate
The Vibrate submenu allows you to enable vibrating call
alert for incoming call notification. The three options
for Vibrate are Vibrate Only, Ring/Vibrate, and Ring
Only.
The Tone Send submenu, when enabled, allows your
phone to send DTMF tones during a call. This allows
operations like electronic banking and other DTMF
tone-operated activities. The two options for Tone Send
are On and Off. When Tone Send is turned Off, your
phone does not send DTMF tones. The two options for
Tone Send are On and Off.
Ear Volume
The Ear Volume submenu allows you to adjust the vol-
ume of the earpiece using the menu setting. You can also
42
Menu Descriptions
The PROFILES menu contains the following Profile
Message Alert
The Msg Alert submenu allows you to turn On or Off
the tone that sounds when an incoming text message or
a message waiting signal is received. The two options for
Msg Alert are On and Off.
selections: Normal ( ), Data/Fax ( ), Handsfree
(
), Meeting (
), Weekend (
, and Profile
), Travel (
.
),
Profile , Profile
Activate
Profiles Menu
Use the Activate submenu to select an operating profile
for your mobile phone. These profiles include Normal,
Data/Fax, Handsfree, Meeting, Weekend, Travel, Profile
1, Profile 2, and Profile 3.
ꢀ
Ñ or Ô 6
Once you have activated a profile, you can customize
any or all profile-dependent settings. The profile-depen-
dent settings apply only to the active profile. Non pro-
file-dependent settings (for example, language) apply to
all profiles.
Your Ericsson mobile phone has nine user-customizable
profiles which allow you to adapt to several different
operating environments throughout the entire day. Your
phone has been designed to allow you to easily switch
into and out of each profile. Many features located
throughout your menu are profile settings. These set-
tings are indicated by the profile icon ( ). Each profile
feature can be set to a different value for every profile.
Note! When you use your Ericsson vehicle or portable hands-
free kit, the handsfree profile (
) is automatically acti-
vated. When you connect your phone to a data or fax
device, the Data/Fax profile ( ) is automatically acti-
vated.
In Normal profile, for example, you can program your
phone’s Ring Volume, Ear Volume, and Key Sound
volume to a moderate level. In Meeting profile, however,
you can change these settings to lower values or even
turn them off completely. When you attend a meeting,
you can quickly change from Normal profile to Meeting
profile.
Screen Calls
Use the Screen Calls submenu to specify groups of call-
ers that will be restricted from ringing through on the
phone. In the Screen Calls submenu, you will see a list
of your phonebook groups and you can choose to silence
the ringer for a particular group or groups of callers.
Press * or # to put a checkmark into the box next to the
Note! Your current profile is indicated by the icon in the upper
right corner of the Standby screen.
Menu Descriptions
43
return the phone to its factory settings. Your security
code is not reset.
desired group ( ). Once you have selected all the
groups to be screened, press <(6 to exit.
Note! You will be prompted to enter your security code to
Screen calls is a profile-dependent feature. You can spec-
ify groups of callers that will be restricted from ringing
through in each of the 9 profiles.
enter the Reset Profile submenu.
Reset Menu
Next Call Type
Use the Reset Menu submenu to return all menu selec-
tions to the original factory settings. The Reset Menu
function will return all profile features and non-profile
features to their factory settings. Press <(6 to return the
phone to its factory settings. Your security code is reset
to the original factory setting (0000).
Use the NextCallType submenu to specify what type of
call you will receive next. The three options for Next-
CallType are Voice call, Data call, and Fax call. For
example, if someone calls you to let you know that they
are going to send you a fax, you can plug your phone
into your personal computer, set the NextCallType to
Fax call, and you are ready to receive the fax.
Note! You will be prompted to enter your security code to
enter the Reset Menu submenu.
Note! If you are having problems receiving a data or fax call, be
sure to set your NextCallType to Data call or Fax call.
For more information on connecting your mobile phone
to your computer and initiating a fax call, refer to the
“Data, Fax, and Internet Calls” chapter.
Note! If NextCallType is set to Fax call or Data call, your
phone will not receive voice calls. The NextCallType
setting is valid until the next incoming call is received.
After the call is received, the NextCallType setting
defaults to Voice call.
Reset Profile
Use the Reset Profile submenu to quickly return the
currently active profile to its original factory settings for
every profile feature throughout the menus. Press <(6 to
44
Menu Descriptions
Using the Phonebook
You can store phone numbers and associated names in
Storing a Phone Number Using the Phone Lists Menu
your phone’s phonebook to use for Recall Dialing,
Speed Dial, and Super Dial. Each phone number you
store can be up to 32 digits in length, and any names
you store can be up to 24 characters in length.
ꢀ
Ñ or Ô ꢆꢆ
ꢀꢁ Press Ñ or Ô from the Standby screen to access the
Note! When accessing the PHONE LISTS menu, the maxi-
mum of 250 phone numbers that your phone can store
is based on each phone number containing 12 digits and
having a 20-character name stored with the phone num-
ber. Storing longer phone numbers and names reduces
the amount of memory available and the actual phone
numbers you can store. You can view the number of
phonebook positions available through the PHONE
LISTS menu.
main menu.
ꢂꢁ Press Ñ or Ô until the PHONE LISTS menu is
highlighted.
ꢃꢁ Press <(6 to open the PHONE LISTS menu.
ꢄꢁ Press Ñ or Ô until the Add Entry submenu is high-
lighted.
ꢅꢁ Press <(6 to select the Add Entry submenu. The
next open phonebook position is shown in the dis-
play.
Storing a Phone Number and Name
There are three ways to store a phone number and name
in your phonebook:
ꢆꢁ Enter a name you want associated with this phone
number (refer to Entering Letters and Symbols in
this chapter).
• Store a phone number using the PHONE LISTS
menu.
ꢇꢁ Press Ô to move the cursor to the Number:line in
the display.
• Store a phone number already shown in the display.
ꢈꢁ Enter the phone number you want to store.
• Store a phone number in secure memory.
ꢉꢁ Press <(6 to store the phone number. Stored I n
phonebookis shown in the display.
Using the Phonebook
45
ꢀꢊꢁTo store a number in a specific position, press Ô to
access the position field. Enter the number of the
phonebook position to which you want the entry
stored. Press <(6 to store the number in that particu-
lar position.
Note! Character sets vary according to language selection.
Storing a Phone Number Already Shown in the Display
ꢀ
Ñ or Ôꢃꢆꢆ
Entering Letters and Symbols
ꢀꢁ With the phone number shown in the display, press
Press the appropriate key, 0-9, #, or * repeatedly until
the desired letter, character, or digit appears in the dis-
play. For example, to enter an A, press the numeric key 2
once. To enter a B, press the numeric key 2 twice.
Ô to access the main menu.
ꢂꢁ Press Ñ or Ô until the PHONE LISTS menu is
highlighted.
ꢃꢁ Press <(6 to open the PHONE LISTS menu.
Press this
ꢄꢁ Press Ô until the Add Entry submenu is high-
1
2
3
4
5
6
7
8
9
0
*
Space 1
lighted.
A B C 2 À Á Â Ã Ç
D E F 3 È É Ê Ë
G H I 4 Í Î Ï
J K L 5
ꢅꢁ Press <(6 to select Add Entry. The phone number is
shown in the Number: line of the Add Entrydis-
play.
ꢆꢁ If you want to enter a name to be associated with this
M N O 6 Ñ Ó Ô Õ
P Q R S 7
phone number, enter it now on the Name:line.
ꢇꢁ Press <(6 to store the phone number in the phone-
book.
T U V 8 Ù Ú Û Ü
W X Y Z 9
Specifying a Phonebook Position
0
If you want to store a phone number in a specific phone-
book position, follow the previous steps for entering the
phone number and name, then press Ô to move the cur-
sor to the Posi ti on:line. The phone number is
stored in the next available phonebook position unless
you enter a different phonebook position number.
Toggles between upper and lower-
case.
#
, . ? - ( ) ‘ “ ! ; : # @ & $ % + - * / | = <
>
Note! The * key toggles between upper and lowercase letters.
ꢂꢃ
8VLQJꢁWKHꢁ3KRQHERRN
Phone numbers stored in positions 1 through 9 can be
used with the Super Dial feature.
ꢃꢁ Press <(6 to open the PHONE LISTS menu.
ꢄꢁ Press Ñ or Ô until the Recall Entry submenu is
highlighted.
All 1- and 2-digit phonebook positions can be used with
the Speed Dial feature.
ꢅꢁ Press <(6 to open the Recall Entry submenu. You
can recall a phone number in Phonebook by the
position number or by name.
Storing a Phone Number in Secure Memory
ꢆꢁ To recall by name, enter the letters of the name in
the Name:line. You can enter just a few letters of the
name or the complete name. If you enter just a few
letters, the phone finds the first name in the phone-
book that matches the letters you entered. Then you
can scroll through an alphabetical list of names to
find the one you are looking for.
A phone number stored in secure memory cannot be
recalled unless you enter the correct security code. To
store a phone number in secure memory, follow the pre-
viously described steps for entering a name and phone
number, then press and hold <(6. You will be prompted
to enter your security code. If you enter the correct code,
the phone number is stored, and Saved i n secure
memory!appears in the display.
To search by the position number, press Ô until the
cursor is on the Posi ti on:line and enter the num-
ber. The corresponding name and phone number are
shown in the display.
Recalling a Phone Number or Name
There are two ways you can do this:
ꢀꢁ Recalling a phone number using the PHONE
LISTS menu.
ꢇꢁ You can place a call to the phone number in the dis-
ꢂꢁ Recalling a phone number from secure memory.
play by pressing <(6.
Recalling a Phone Number Using the PHONE LISTS
Menu
ꢀ
Press and hold Ô to access the
Recall Entry submenu.
ꢀꢁ Press Ñ or Ô from the Standby screen to access the
main menu.
ꢂꢁ Press Ñ or Ô until the PHONE LISTS menu is
highlighted.
Using the Phonebook
47
Recalling a Phone Number From Secure Memory
ꢀꢁ Follow the previously described steps for opening
Recal l Entry from the PHONE LISTS menu.
Erasing a Phone Number
ꢀꢁ Press Ñ or Ô from the Standby screen to access the
main menu.
ꢂꢁ Press Ô until the Posi ti on:line is highlighted.
ꢂꢁ Press Ñ or Ô until the PHONE LISTS menu is
ꢃꢁ Enter the position of the phone number stored in
highlighted.
secure memory.
ꢃꢁ Press <(6. The PHONE LISTS menu is shown in
ꢄꢁ Press <(6. Securi ty Code:appears in the display.
the display.
ꢅꢁ Enter your security code.
ꢄꢁ Press Ñ or Ô until the Recall Entry submenu is
ꢆꢁ If you enter the correct security code, the phone
highlighted.
number is shown in the display.
ꢅꢁ Press <(6 to select the Recall Entry submenu. The
phonebook appears in the display.
Editing a Phone Number
ꢆꢁ Press Ñ or Ô until the phone number and name you
want to erase is shown in the display.
ꢀꢁ Recall the phone number. See Recalling a Phone
Number or Name from Your Phonebook in this
chapter.
Note! To search for a specific Phonebook entry, enter the first
letter of the name of the Phonebook entry and press
<(6. This allows you to scroll alphabetically through the
entries for the character entered.
ꢂꢁ When the phone number is shown in the display,
press Ô to move the cursor to the Number:line.
ꢇꢁ Press and hold &/5. Erase Posi ti on 000?
(where 000 is the phonebook position) is shown in
the display.
ꢃꢁ To add digits to the end of the phone number, just
enter the digits.
ꢄꢁ To replace digits, press &/5 to erase the digits you
ꢈꢁ Press <(6 to erase the phone number from the
phonebook. Posi ti on 000 i s erased!is
shown briefly in the display.
want to change and then enter the new digits.
ꢅꢁ Press <(6 to store the altered phone number. The
message Posi ti on 00X i s occupi ed.
Repl ace?appears in the display (where 00Xis the
phonebook position of an existing entry).
ꢆꢁ Press <(6 again to replace the phone number you
previously stored with the modified phone number.
ꢂꢄ
8VLQJꢁWKHꢁ3KRQHERRN
ꢇꢁ Press <(6 to select the Phone Group to which you
Phone Groups
want to assign group options.
ꢈꢁ Press Ñ or Ô until Group Ring is highlighted.
The Phone Groups submenu allows you to organize
your phonebook into groups by assigning individual
phone numbers to 1 of 10 Phone Groups. For each
Phone Group, you may define the group Members and
the group Ring Sound. If you receive a call from a par-
ticular group Member, the group Ring will sound.
Groups are also used in conjunction with the Screen
Calls submenu to allow you to select a group or groups
whose incoming calls will be screened so that the ringer
does not sound. The Screen Calls submenu is part of
the PROFILES menu. Refer to the Screen Calls section
in the “Menu Descriptions” chapter for more informa-
tion on Screen Calls.
ꢉꢁ Press <(6 to select Group Ring.
ꢀꢊꢁPress Ñ or Ô to scroll through the 25 user-selectable
ring types (including musical melody ring options).
The active ring type will be indicated by a filled radio
button ( ).
ꢀꢀꢁPress <(6 to select the Group Ring that you want to
assign to your Phone Group. The selected ring type
will ring only when you receive a call from one of the
group members.
Note! Your service provider must support Caller ID for this
feature to work properly.
ꢀꢂꢁPress 12 to return to the previous screen.
Assigning Group Rings to Your Phone Groups
ꢀꢃꢁPress &/5 to return to the Standby screen.
ꢀꢁ Press Ñ or Ô from the Standby screen to access the
main menu.
Assigning Group Members to Your Phone Groups
ꢂꢁ Press Ñ or Ô until the PHONE LISTS menu is
ꢀꢁ Press Ñ or Ô from the Standby screen to access the
highlighted.
main menu.
ꢃꢁ Press <(6. The PHONE LISTS menu is shown in
ꢂꢁ Press Ñ or Ô until the PHONE LISTS menu is
the display.
highlighted.
ꢄꢁ Press Ñ or Ô until the Phone Groups submenu is
ꢃꢁ Press <(6. The PHONE LISTS menu is shown in
highlighted.
the display.
ꢅꢁ Press <(6 to select the Phone Groups submenu. The
ꢄꢁ Press Ñ or Ô until the Phone Groups submenu is
list of Phone Groups appears in the display.
highlighted.
ꢆꢁ Press Ñ or Ô until the Phone Group that you want
ꢅꢁ Press <(6 to select the Phone Groups submenu. The
to select is highlighted.
list of Phone Groups appears in the display.
Using the Phonebook
49
ꢆꢁ Press Ñ or Ô until the Phone Group that you want
to select is highlighted.
ꢇꢁ Press <(6 to select the Phone Group to which you
want to assign group options.
ꢈꢁ Press Ñ or Ô until Members is highlighted.
ꢉꢁ Press <(6 to select Members.
ꢀꢊꢁPress Ñ or Ô to scroll through your list of phone-
book entries. Select a new member by highlighting
the desired member and pressing the * or # key. The
selected entry will be indicated by a filled checkbox
(
).
ꢀꢀꢁPress <(6 to save your changes.
ꢀꢂꢁPress 12 to return to the previous screen.
ꢀꢃꢁPress &/5 to return to the Standby screen.
ꢈꢆ
8VLQJꢁWKHꢁ3KRQHERRN
Message Services
Text messages and voice mail are the two types of mes-
Emergency Text Messages
sage services your Ericsson mobile phone can support.
The message services are provided by your service pro-
vider and subject to availability.
If your phone is turned On when it receives an emer-
gency message, your phone sounds two brief tones, and
a message appears in the display for a few seconds
prompting you to read the emergency message.
Emergency messages are always shown before urgent and
normal messages, regardless of the order in which the
messages were received.
Text Message Service
Your phone can store a maximum of 2KB of message
text in its memory. The messages can be classified by the
sender using one of the following message types: Nor-
mal, Urgent, and Emergency. A text message can also
contain one or more callback numbers - phone numbers
specified by the person leaving the message.
Urgent Text Messages
The message category assignment and the callback num-
ber capability are dependent on the system used by your
service provider.
If your phone is turned On when it receives an urgent
text message, your phone sounds a brief tone, and a mes-
sage appears in the display.
After a sender leaves a message with your service pro-
vider, the service provider transmits the message to your
phone. If your phone is On, it receives the message. If
your phone is Off, your service provider retains the mes-
sage and transmits it again later.
Normal Text Messages
If your phone is turned On when it receives a normal
text message, your phone sounds a brief tone, and a mes-
sage appears in the display.
When a message is received, your phone lets you skip,
review, save, or delete a text message.
Message Services
51
•
If you do not want to call the displayed callback
phone number, press 12, and resume reading the
actual message.
If there is an error in a callback phone number, you can
edit a callback phone number before you make the call.
Use the cursor, which appears at the left side of the sec-
ond line of the display, to edit a callback phone number.
When editing the phone number, you can:
Text Messages With Callback Numbers
Callback phone numbers are one or more phone num-
bers that are attached to or contained within a text mes-
sage. These phone numbers are specified by the person
sending the message.
• Move the cursor position by pressing and holding
one of the arrow keys.
• Insert a number at the cursor location by pressing a
number key.
• Delete the number at the cursor location by press-
ing &/5.
If you press <(6 while reading a message that contains a
callback phone number, a message appears in the display
prompting you to call the phone number.
• To dial the displayed phone number, press <(6.
Text Message Memory
• To place a calling card call to the displayed phone
number, press and hold <(6.
When the text message icon ( ) is flashing, your text
message memory is full. When the text message memory
is full and a new text message is received, the new text
message overwrites any old text messages that have not
been saved. If your phone’s text message memory is full,
• If you do not want to call the displayed phone
number, press 12, and resume reading the actual
message.
If there are two or more callback phone numbers in a
text message, the up and down arrows (Ñ or Ô) appear
in the top right section of the display.
and all your messages have been saved ( ), you must
delete text messages from your phone’s memory before
you can receive new text messages.
• Scroll through the callback phone numbers by
pressing Ñ or Ô. When the callback phone number
that you want to dial appears, press <(6.
ꢈꢀ
0HVVDJHꢁ6HUYLFHV
ꢂꢁ Display the message line by line by pressing Ñ or Ô.
Status of Text Messages
A text message can have the following status:
ꢃꢁ Display the message three lines at a time by pressing
and holding Ñ or Ô.
• Unread ( ) - The text message has not been read.
Existing unread text messages will not be overwrit-
ten by a new message.
Reading Text Messages During a Call
When you receive a message during a call, your phone
sounds a brief tone and a message appears in the display
prompting you to read the text message (the ability to
receive a text message during a call is operator depen-
dent). To read the text message, do one of the following:
• Read (
) - The text message has been read, but
has not been saved. If your phone’s text message
memory is full, this message will be overwritten by
new text messages.
• Saved ( ) - The text message has been read and
saved. Existing saved text messages will not be over-
written by a new message. If your phone’s text mes-
• Press <(6 to display the incoming message
• Pressꢀ12ꢀto continue talking and have the message
treated as an unread message ( ).
sage memory is full, the text message icon ( ) will
flash. You must delete one or more saved messages
before your phone can receive a new text message.
Note! You cannot receive messages during a call if the text mes-
sage memory is full.
Reading Unread Text Messages
If you have messages that you have not read, a number
Reading Text Messages
and the text message icon appear in the display.
Reading a Text Message Immediately
Upon Receipt
To read the text messages:
When a text message is received by your phone, one or
more tones sound, and a message appears in the display
that notifies you that an emergency, urgent, or normal
message has been received.
ꢀꢁ Press Ñ or Ô from the Standby screen to access the
main menu.
ꢂꢁ Press Ñ or Ô until the MESSAGES menu is high-
lighted.
To read the text message:
ꢃꢁ Press <(6 to open the MESSAGES menu.
ꢀꢁ Press <(6 to read the message, or press 12 to skip
the message. The message is skipped and is kept as
an unread message. It can be reviewed later.
ꢄꢁ Press Ñ or Ô until the New Messages submenu is
highlighted.
ꢅꢁ Press <(6 to open the New Messages submenu.
Message Services
53
ꢆꢁ Press Ñ or Ô until the new message is highlighted.
• To save the text message to memory, press and hold
<(6. The message status is set to saved ( ).
ꢇꢁ Press <(6 to open the message. Once the message is
open, you can scroll through the message one line at
a time by pressing Ñ or Ô. You can also scroll up or
down through the message three lines at a time by
pressing and holding Ñ or Ô.
• To delete the message, press and hold &/5. The
message will be deleted.
• To skip the current message and move to the next
message, press ꢆ. The message status is set to read
(
).
• To return to the previous message, press ꢄ. The
message status is set to read ( ).
Reading Saved Text Messages
ꢀꢁ Press Ñ or Ô from the Standby screen to access the
main menu.
ꢂꢁ Press Ñ or Ô until the MESSAGES menu is high-
lighted.
Voice Mail Service
ꢃꢁ Press <(6 to open the MESSAGES menu.
Your phone can receive voice mail notification when it is
turned On. If your service provider transmits the notifi-
cation and your phone is turned Off, you will receive the
notification the next time you turn your phone On.
ꢄꢁ Press Ñ or Ô until the Old Messages submenu is
highlighted.
ꢅꢁ Press <(6 to open the list of old messages.
ꢆꢁ Press Ñ or Ô until the message you want to read is
Receiving Voice Mail Notification When
Your Phone Is In Standby
If your phone is turned On and is in standby when it
receives a voice mail notice, your phone sounds a brief
tone. If you have previously stored a voice mail access
number, a message similar to the one in this illustration
appears in the display.
highlighted.
ꢇꢁ Press <(6 to open the message.
ꢈꢁ With the message open, scroll through the message
one line at a time by pressing Ñ or Ô. You can also
scroll up or down through the message three lines at
a time by pressing and holding Ñ or Ô.
Saving and Deleting Text Messages
After you have retrieved and read a text message, you can
do the following:
ꢈꢂ
0HVVDJHꢁ6HUYLFHV
To call the phone number shown, press <(6. To make a
credit card call, press and hold <(6. To return to the
Standby screen, press 12.
Note! Once you have stored your voice mail access number,
you can retrieve voice mail messages by pressing and
holding
.
If you have not stored an access number, you will see
Voi ce mai l access number not stored.
when you receive a voice mail notice. After this screen
has been displayed for five seconds, another screen
appears that gives you the opportunity to store an access
number. The phone number is stored as your default
voice mail access number.
ꢀ
Ñ or Ô ꢂꢁ
ꢀꢁ Press Ñ or Ô from the Standby screen to access the
main menu.
ꢂꢁ Press Ñ or Ô until the MESSAGES menu is high-
lighted.
ꢃꢁ Press <(6 to open the MESSAGES menu.
ꢄꢁ To store a home-system access number, press Ñ or
Ô until the Voice Mail submenu is highlighted.
After you store the phone number, a screen appears ask-
ing if you want to call that phone number.
ꢅꢁ Press <(6 to open the Voice Mail submenu.
ꢆꢁ Enter your voice mail phone number on the Num-
ber:line.
Receiving Voice Mail Notification During
a Call
If your phone receives a voice mail notice during a call, a
brief tone sounds and Voi ce mai l recei ved.
briefly appears in the display. After you end your call, a
ꢇꢁ Press <(6. Sel ecti on Stored!appears in the
display.
ꢈꢁ Press 12 twice or press &/5 to return to the Standby
screen.
number and the voice mail icon (
display.
) are shown in the
Retrieving Voice Mail
If there is a number beside the voice mail icon in the dis-
play, you have that many voice mail messages that you
have not heard.
Storing Your Voice Mail Number
It is a good idea to store your voice mail access num-
ber(s) so that a number automatically displays when you
receive a voice mail notice.
To listen to these voice mail messages:
Message Services
55
ꢀꢁ Press Ñ or Ô from the Standby screen to access the
main menu.
ꢂꢁ Press Ô until the MESSAGES menu is highlighted.
ꢃꢁ Press <(6 to open the MESSAGES menu.
ꢄꢁ Press Ñ or Ô until the Voice Mail submenu is high-
lighted.
ꢅꢁ To dial your voice mail access number, move the
cursor to the Voice Mail submenu and press <(6.
You can make a credit card call by pressing and
holding <(6.
ꢆꢁ If you have not stored your voice mail number, enter
it now.
ꢇꢁ Press <(6 to call your selected access number.
ꢀ
Press and hold
to dial the
access number stored in the voice
mail menu.
ꢈꢃ
0HVVDJHꢁ6HUYLFHV
Data, Fax, and Internet Calls
Your Ericsson mobile phone contains a modem similar
Data Calls
to the modems you use to connect your computer to
your home or office telephone service. Rather than con-
necting to standard telephone lines, however, the
modem in your mobile phone allows you to connect
your computer to the mobile telephone system. In
places where mobile network operators provide the nec-
essary support, you can use your mobile phone to send
or receive faxes, upload or download data files, or access
the Internet. This chapter will assist you with setting up
your computer and phone to handle data, fax, and Inter-
net calls on the mobile network.
Data calls are placed to exchange computer files between
two computers. While the data connection is in place,
files can be transferred between the connected comput-
ers, according to the capabilities of the software in use.
When a data call is made, the connection will remain in
place until it is closed by one of the computers involved.
To make or receive data calls with your Ericsson mobile
phone, you must have a properly configured communi-
cations program running on your computer.
Fax Calls
Note! If digital data/fax/Internet service is not available, you
can purchase an analog modem card that is compatible
with your Ericsson mobile phone and use data/fax func-
tions on the available analog system.
Fax calls are placed to send fax messages. When a fax
message has been sent, your fax software or the originat-
ing fax machine will terminate the call. To make or
receive fax calls with your Ericsson mobile phone, you
must have a properly configured fax program running
on your computer.
Differences Between Data, Fax, and Internet
Calls
Internet Calls
Internet calls are placed to Internet Service Providers
(ISP) when you want to use e-mail or access websites on
the World Wide Web. To make Internet calls, you must
have an account with an ISP and a properly configured
Internet access program (browser) running on your
computer. When your software is installed and set up to
dial your ISP, calls can be made using the normal dialing
Your Ericsson mobile phone can handle data, fax, and
Internet calls, but each type of call requires correspond-
ing software that must be running on your computer.
Data, Fax, and Internet Calls
57
procedure. Once a connection to your ISP is established,
it will remain in place until you disconnect or until it is
automatically disconnected due to the degradation of
signal quality or due to inactivity.
Note! The availability of digital mobile voice service does not
necessarily imply that your mobile service operator sup-
ports digital data operation.
Note! Throughout this chapter, references to data/fax/internet
Setting Up Your Computer
will be referred to as simply data.
To operate properly with the modem in your Ericsson
mobile phone, make sure that your computer has the
following hardware and software:
Before You Start
Before setting up your phone for data operation, do the
following:
• A functional serial port
• An operating system that supports data access soft-
ware, such as Windows 95 or Windows 98
• Make sure that you have the required hardware and
software components.
• Appropriate fax (class 2.0), Internet access, or file
transfer software
Note! You must have an Ericsson DA 18 Phone Book Manager
Accessory Kit, which includes a serial interface cable, to
connect your Ericsson mobile phone to your computer.
The kit also includes a compact disc with the software
required to install your phone as a modem on your com-
puter.
Note! Class “2.0” is different from Class “2”.
Initial Setup
Successful first-time setup of your phone and computer
for data operation involves the following steps:
• Confirm that your mobile service provider supports
digital data services in your planned usage area. If
digital data service is not available, you can pur-
chase an analog modem card that is compatible
with your Ericsson mobile phone and use data
functions on the available analog system.
ꢀꢁ Connect Your Computer to Your Phone
Your Ericsson DA 18 Phone Book Manager Acces-
sory Kit contains a serial interface cable. The cable
has a plug on one end that matches the receptacle
on the bottom of your Ericsson mobile phone. The
other end of the cable has a 9-pin female connector
that matches the standard 9-pin serial interface port
• Verify that you have the necessary subscription.
ꢈꢄ
'DWD+ꢁ)D[+ꢁDQGꢁ,QWHUQHWꢁ&DOOV
connector. Connect one end of the cable to your
Ericsson mobile phone and the other end to the
serial port on your computer.
Operation
Receiving Data and Fax Calls
N
Z
S
O
C
S
E
R
I
When your phone and computer are properly set up,
your phone will go into Data/Fax profile ( )as soon as
your fax or file transfer software is started. You are then
ready to receive data and fax calls. If you do not see the
Data/Fax icon, refer to the Troubleshooting chapter.
N
Z
S
O
C
S
E
R
I
Note! If you are trying to connect to a 25-pin serial interface
port on your computer, you will need an adapter. You
can purchase a 25-pin serial interface port adapter at
most computer supply stores.
Review the instructions from your mobile service pro-
vider that describe the procedures and rules for making
and receiving data calls in your area. If you are having
trouble receiving a data call, you may need to configure
your phone manually to receive a data call. To configure
your phone manually, do the following:
ꢂꢁ Install Your Modem Control Software (driver)
The modem control software (driver) that you need
to use your Ericsson mobile phone is available on
the compact disc included in your DA 18 Phone
Book Manager Accessory Kit. Refer to the Install-
ing Your Modem Driver From Your Compact Disc
section at the end of this chapter for help with
installing drivers for some operating systems. When
the appropriate driver is loaded, refer to the sections
on making and receiving data and fax calls later in
this chapter.
ꢀꢁ Set up your phone and computer as described
above.
ꢂꢁ Press Ñ or Ô from the Standby screen to access the
main menu.
ꢃꢁ Press Ñ or Ô until the PROFILES menu is high-
lighted.
ꢄꢁ Press <(6 to open the PROFILES menu.
ꢃꢁ Set up your data access software according to the
ꢅꢁ Press Ñ or Ô until the NextCallType submenu is
instructions supplied with it.
highlighted.
ꢆꢁ Press <(6 to open the NextCallType submenu.
The current selection is indicated by a filled radio
button.
ꢇꢁ Press Ñ or Ô until the call type for the next call you
will receive is highlighted.
Data, Fax, and Internet Calls
59
ꢈꢁ Press <(6 to select the highlighted call type.
Your Ericsson mobile phone enables you to initiate voice
calls from Windows applications when connected to the
Ericsson Voice Call Dialer. This is particularly useful if
you have contact cards with phone numbers in a contact
management application. You can open a contact card,
click on the phone icon, and originate a call using your
Ericsson mobile phone. Then you simply pick up your
mobile phone and continue the call. The Ericsson Voice
Call Dialer is compatible with most contact manager
software packages. Refer to the “Manual Installation of
Your Modem Driver” or “Voice Call Dialer” section at
the end of this chapter for help with installing this driver
for some operating systems.
ꢉꢁ Sel ecti on stored!appears in the display. Your
phone is now configured to a specific type for your
next incoming call.
Note! The NextCallType setting will be reset to Voice call
after every incoming call. If you plan to receive several
data calls, reset the feature after you complete each call.
Making Data and Fax Calls
When your phone and computer are properly set up,
your phone will go into Data/Fax profile as soon as your
fax or file transfer software is started. You are then ready
to send a fax, or initiate data calls, as with any other
modem.
Disconnecting
Disconnect your Ericsson mobile phone from your com-
puter by disconnecting the cable from your phone and
the serial port from your computer. When your fax pro-
gram is stopped or when your interface cable is discon-
nected, your phone will exit Data/Fax profile and return
to the previously selected profile.
Review the instructions from your mobile service pro-
vider that describe the procedures and rules for making
and receiving data calls in your area.
Note! Your phone will remain in Data/Fax profile until your
phone cable is disconnected.
Note! To avoid unnecessary airtime charges, terminate your
data calls as soon as you have finished transferring files
by pressing the 12 key. Some software can be set to do
this automatically.
Use With Other Ericsson Accessories
Rapid or Travel Charger
To charge your phone’s battery with an Ericsson rapid or
travel charger during data operation, do the following:
Making Voice Calls While Connected to Your Computer
You can originate voice calls while your phone is in
Data/Fax profile and you are not on a data call. You can
receive voice calls if the NextCallType is set to Voice
Call.
ꢀꢁ Plug one end of the cable from your DA 18 Phone
Book Manager Accessory Kit into your phone.
ꢃꢆ
'DWD+ꢁ)D[+ꢁDQGꢁ,QWHUQHWꢁ&DOOV
ꢂꢁ Plug the other end of the cable from your DA 18
Phone Book Manager Accessory Kit into the serial
port on your computer.
ꢃꢁ Plug the charger cable into the bottom of the con-
nector from your DA 18 Phone Book Manager
Accessory Kit cable.
ꢃꢁ Plug the charger cable into the bottom of the con-
nector from your DA 18 Phone Book Manager
Accessory Kit cable.
ꢄꢁ Plug your charger cable into the wall outlet.
ꢅꢁ Insert the phone into the front compartment of
your desktop charger.
ꢄꢁ Plug the charger cable into the wall outlet.
Note! When you remove your phone from your desktop
charger, your phone will exit Data/Fax profile and return
to the previously selected profile. To return your phone
to Data/Fax profile, place your phone in your desktop
charger and restart your data access software.
ERICSSONZ
Z
N
Achieving Best Performance
O
S
S
C
I
R
E
Charging your Battery
Both your Ericsson mobile phone and your laptop com-
puter batteries should be well-charged before starting
data operation. This will help you avoid interruptions
due to loss of power.
Desktop Charger
To charge your phone’s battery with an Ericsson desktop
charger during data operation, do the following:
You may charge your phone’s battery with an Ericsson
charger during data/fax operation as mentioned above.
ꢀꢁ Plug one end of the cable from your DA 18 Phone
Book Manager Accessory Kit into the back of your
desktop charger.
Signal Strength
It is important to maintain a good signal path between
the phone and the mobile telephone system when mak-
ing data calls. Signals will generally be stronger when the
phone is in an upright position. If you are indoors, your
ꢂꢁ Plug the other end of the cable from your DA 18
Phone Book Manager Accessory Kit into the serial
port on your computer.
Data, Fax, and Internet Calls
61
signal will generally be stronger when the phone is near a
window.
Installing Your Modem Driver From Your
Compact Disc
In a Vehicle
Windows 95
It is possible to receive data calls from your vehicle.
Operation from a moving vehicle may not be satisfac-
tory because data may be lost when your call is trans-
ferred from one mobile base station to another. Be sure
to give full attention to driving and pull off the road and
park before making or receiving calls, if driving condi-
tions so require.
Complete the following steps to install the appropriate
modem driver (INF file) on your computer if you are
running Windows 95:
ꢀꢁ Turn On your Ericsson mobile phone.
ꢂꢁ Connect one end of your serial cable to your Erics-
son mobile phone and the other end to your com-
puter’s serial port.
Transmission Disturbances
ꢃꢁ Restart your computer. Windows will autodetect
your Ericsson mobile phone. When your desktop
returns, insert the compact disc from your DA 18
Phone Book Manager Accessory Kit. One of the fol-
lowing screens will appear:
Brief interruptions of mobile telephone signals that
would not be bothersome during a voice call may cause
problems during data operation, depending upon the
error correction capabilities of the software being used.
Such interruptions are uncommon during stationary
operation, but can be caused by vehicles or people pass-
ing nearby, especially in areas of low signal strength. You
can use the signal strength indicator on your phone to
verify that you have a good signal path.
• New Hardware Found
When the New Hardware Found screen appears,
choose Driver from disk provided by your hardware
manufacturer and click OK.
At the Install from Disk screen, type D:\ in the box
then click OK (if your CD-ROM drive is not drive
D, type the correct CD-ROM drive designation).
• Update Device Driver Wizard
When the Update Device Driver Wizard appears,
click Next.
Once Windows has found the driver, click Finish.
ꢃꢀ
'DWD+ꢁ)D[+ꢁDQGꢁ,QWHUQHWꢁ&DOOV
Note! If neither the New Hardware Found nor the Update
Device Driver Wizard screens appear, refer to the Man-
ual Installation Instructions at the end of this chapter.
ꢅꢁ Select Search for the best driver for your device
(recommended) and click Next.
ꢆꢁ Select the appropriate CD-ROM drive and click
Next.
ꢄꢁ When your desktop returns, verify that your modem
is properly installed. From the Start menu on your
Windows desktop, click on Settings, then Control
Panel. Double-click the Modems icon.
ꢇꢁ When Windows is now ready to install the best
driver for this device appears, click Next.
ꢈꢁ When Windows has finished installing the soft-
ware that your new hardware device requires
appears, click Finish.
ꢅꢁ When the Modem Properties screen appears, click
on the description of your modem and click the
Diagnostics tab. Note the COM port to which your
modem is assigned.
ꢉꢁ When your desktop returns, verify that your modem
is properly installed. From the Start menu on your
Windows desktop, click on Settings, then Control
Panel. Double-click the Modems icon.
ꢆꢁ Click OK to proceed.
Windows 98
Complete the following steps to install the INF file on
your computer if you are running Windows 98:
ꢀꢊꢁ When the Modem Properties screen appears, click
on the description of your modem and click the
Diagnostics tab. Note the COM port to which your
modem is assigned.
ꢀꢁ Turn On your Ericsson mobile phone.
ꢀꢀꢁ Click OK to proceed.
ꢂꢁ Connect one end of your serial cable to your Erics-
son mobile phone and the other end to your com-
puter’s serial port.
Manual Installation of Your Modem Driver or
Voice Call Dialer
ꢃꢁ Restart your computer. Windows will autodetect
your Ericsson mobile phone. When your desktop
returns, insert the compact disc from your DA 18
Phone Book Manager Accessory Kit.
Complete the following steps to manually install the
INF file on your computer if you are running Windows
95/98
ꢄꢁ When the Add New Hardware Wizard screen
appears, click Next.
ꢀꢁ Turn On your Ericsson mobile phone.
Note! If the Add New Hardware Wizard screen does not
appear, refer to the Manual Installation Instructions at
the end of this chapter.
Data, Fax, and Internet Calls
63
ꢂꢁ Connect one end of your serial cable to your Erics-
son mobile phone and the other end to your com-
puter’s serial port.
Settings, then Control Panel. Double-click the
Modems icon.
ꢀꢄꢁ When the Modem Properties screen appears, click
on the description of your modem and click the
Diagnostics tab. Note the COM port to which your
modem is assigned.
ꢃꢁ From the Start menu on your Windows desktop,
click on Settings, then Control Panel. Double-click
the Modems icon.
ꢄꢁ Click Add.
ꢀꢅꢁ Click OK to proceed.
ꢅꢁ At the Install New Modem screen, select Other.
Click Next.
Troubleshooting
ꢆꢁ At the next Install New Modem screen, select Don’t
run Hardware Installation Wizard then click Next.
ꢀꢁ You cannot set up or maintain a data/fax session.
This will occur if you are inadvertently originating a
voice call when attempting a data/fax call or if the
data/fax profile icon does not appear on your
phone’s display after you attempt to dial or answer a
data/fax call. To correct the problem, do the follow-
ing:
ꢇꢁ At the next Install New Modem screen, select Don’t
detect my modem, I will select it from a list then
click Next.
ꢈꢁ At the next Install New Modem screen, click on
Have Disk.
ꢉꢁ At the Install from Disk screen, select D:\ at Copy
from Manufacturer’s Disk (if your CD-ROM drive
is not drive D, type the correct CD-ROM drive des-
ignation).
a From the Start menu on your Windows desktop,
click on Settings, then Control Panel.
b Double-click the Modems icon.
c Select the General tab.
d Select Ericsson TDMA Data/Fax Modem from
the pull-down list.
e Click Properties.
f Click General. Make sure that the maximum
speed is set to 19200.
ꢀꢊꢁ At the Install New Modem screen, select Ericsson
Voice Call Dialer, then click Next.
ꢀꢀꢁ Select the COM port to which your Ericsson mobile
phone is connected and click Next.
ꢀꢂꢁ When Your modem has been set up successfully
g Select the Connection tab.
appears, click Finish.
h Click Advanced.
i In the Extra settings box, type the following:
+COS=4,1,2,0; +ES=1,0,1; +DS=0,0,512,6;
ꢀꢃꢁ When your desktop returns, verify that your modem
is properly installed. From the Start menu, click on
ꢃꢂ
'DWD+ꢁ)D[+ꢁDQGꢁ,QWHUQHWꢁ&DOOV
j Click OK to return to the Connection tab.
k Click OK to return to Modem Properties.
l Click Close.
the following:
a Verify that your cellular service provider supports
the over-the-air Privacy service for data/fax calls.
b From the Start menu on your Windows desktop,
click on Settings, then Control Panel.
c Double-click the Modems icon.
d Select the General tab.
e Select Ericsson TDMA Data/Fax Modem from
the pull-down list.
f Click Properties.
Note! If you are using an application that supplies its own box
for entering extra settings, then type the following com-
mand string into that box as well:
+COS=4,1,2,0; +ES=1,0,1; +DS=0,0,512,6;
ꢂꢁ You cannot originate a voice call.
a From the Start menu on your Windows desktop,
click on Settings, then Control Panel.
b Double-click the Modems icon.
c Select the General tab.
g Select the General tab.
h Select the Connection tab.
i Click on Advanced.
d Select Ericsson Voice Call Dialer from the pull-
down list.
j In the Extra settings box, type the following:
+COS=4,1,2,1;
e Click Properties.
f Select the Connection tab.
g Click Advanced.
k Click OK to return to the Connection tab.
l Click OK to return to Modem Properties.
m Click Close.
h Type the following in the Extra Settings box of
the the Advanced Connection Settings window:
*ERVNOK=1
i Click OK to return to the Connection tab.
j Click OK to return to Modem Properties.
k Click Close.
Note! If you are using an application that supplies its own box
for entering extra settings, then type the following com-
mand string into that box as well:
+COS=4,1,2,1; into that box as well.
ꢄꢁ You are having trouble initiating data/fax calls
from your computer.
Note! If you are using an application that supplies its own box
for entering extra settings, then type the following com-
mand string into that box as well:
Check to see if your COM ports are occupied. If so,
you must temporarily disable the software applica-
tions that are using the COM ports.
+COS=4,1,2,0; +ES=1,0,1; +DS=0,0,512,6;
ꢃꢁ You cannot enable over-the-air Privacy for data/fax
calls.
To enable over-the-air Privacy for data/fax calls, do
Data, Fax, and Internet Calls
65
ꢃꢃ
'DWD+ꢁ)D[+ꢁDQGꢁ,QWHUQHWꢁ&DOOV
Problems You Can Solve
Displayed Messages and Explanations
Problems and Possible Solutions
ꢀꢁ The phone does not turn On.
Charge or replace the battery.
The signal is too weak to make a call. Try again
when the signal strength is one bar or stronger.
ꢂꢁ The phone is not ringing when a call is received.
Check the SOUNDS menu to make sure the phone
is not set for Phone Silent. If your phone is not set
for Phone Silent, check Call Screening to make
sure that Call Screening has not been selected for a
particular Phone Group.
Your phone is searching for a mobile service pro-
vider.
ꢃꢁ The phone becomes warm during long calls.
This is not a problem. Because of its size, the phone
may feel slightly warm during extended calls.
You called a number for which you have set call
restrictions.
ꢄꢁ The battery does not seem to charge to full capac-
ity.
You entered an incorrect security code. Enter the
correct security code.
Condition the battery by fully discharging and
charging it three times. Or, if your phone came with
a desktop charger, use the conditioning function on
the desktop charger to condition the battery.
The battery power is low. The indicator light will
flash red. When the phone shuts itself off, replace
the battery with a fully charged one, or use an alter-
nate power source, such as a travel charger.
ꢅꢁ Calls are being dropped.
You are probably in a geographic area with minimal
service. Wait until the signal strength indicator in
your phone's display shows a high relative signal
strength (more bars) before trying a call. Make note
of geographic locations where calls are dropped and
contact your service provider.
Your text message memory is full. Erase some
stored messages to free up memory for new mes-
sages.
3UREOHPVꢁ<RXꢁ&DQꢁ6ROYH
ꢃꢉ
ꢆꢁ The signal strength varies.
This is a common occurrence. Transmitters are set
in geographic areas and coverage is not 100% all of
the time. Signal strength varies as you travel between
cells.
If you need additional information or assistance, or would like to
purchase Original Ericsson Accessories: in the U.S.A., call
1-800-ERICSSON (374-2776).
If you need to speak with someone in Customer Care, call the Customer
Care Center from the following locations:
• In North America, call 1-800-ERICSSON
• In Latin America, call (305) 755-6789
• Elsewhere, call 1-919-472-7908
ꢃꢄ
3UREOHPVꢁ<RXꢁ&DQꢁ6ROYH
Index
$
Caller Number Identification, 32
Calling Cards, 34
Calls
Data Select, 44
Access Tone, 42
Accessories, 68
Answer Option, 36
Antenna, 16
Data/Fax/Internet Calls
Disturbances, 62
Auto Area, 36
Auto Prefix, 36
Auto Retry, 23, 37
Answering, 24
Data, 57
Emergency, 26
International, 27
Internet, 57
Making, 23
Initial Setup, 58
Making, 60
Operation, 59
Preparing For, 58
Receiving, 59
%
Back Light, 39
Battery Information
Battery Location, 16
Charge-Only Mode, 10
Charging, 10
Diagram of Phone, 16
Digit Keys, 19
Display
Muting, 24
Chargers, 11
Diagram, 16
Indicators, 17
Desktop, 12
Conditioning, 13
Connecting, 10
Diagram, 16
Low Power, 27
Removing, 10
Rapid, 11
Travel, 12
Display Language, 22, 39
Document Conventions, 1
Down Arrow Key, 16, 18
CLR Key, 16, 19
Connectors
Charging, 16
Handsfree, 16
Contrast, 39
(
Earpiece, 16
&
Earpiece Volume, 19, 24
Emergency Calls, 26
Erasing Messages, 35
Ericsson Phone
Diagram, 16
Call Manager Menu, 36
Call Totals, 36
Caller ID, 27
Customer Care, 68
'
Caller Identification, 27
Data Calls, 57
Index
69
Display Icons, 17
Display Messages, 20
Highlights, 15
.
Minute Alert, 42
Modem Drivers, 63
Mute
Keypad, 16
Keypad Lock, 38
Illustration, 16
Key Functions, 18
Learning About, 15
Microphone, 19
Ringer, 19
/
Language, 39
Error Messages, 67
Last Call, 36
1
Last Number Dialed, 25
Logs, 32
NO key, 16, 18
)
Fax Calls, 57
Features, 15
Flip, 19
2
Lower Side Key, 16, 19
Old Messages, 35
*
Getting Started, 9
Greeting, 39
Group Rings, 49
0
3
Menu Overview, 30
Menus, 29
Pause Dialing, 25
Phone Display Icons, 17
Phone Groups
Accessing, 31
Call Manager, 35
Messages, 35
,
Assigning Group Members, 49
Group Rings, 49
Submenu, 32
Icons, 17
Incoming Log, 32
Indicator Light, 17
Indicators
Display Icons, 17
Display Indicators, 17
Indicator Light, 16, 17
International Calls, 27
Internet Calls, 57
Opening, 29
Phone Lists, 31
Phonebook, 31
Resetting, 44
Settings, 29
Phone Lists
Adding Entries, 31
Incoming Log, 32
Menu, 31
Sounds, 41
Phone Groups, 32
Recalling Entries, 31
Phonebook
Message Alert, 43
Message Services, 51
Messages Menu, 35
Editing Entries, 48
ꢉꢆ
,QGH[
Entering Letters/Symbols, 46
Erasing Entries, 48
Recalling Names/Numbers, 47
Secure Memory, 47
Greeting, 39
Keypad Lock, 38
Menu, 38
Power On Lock, 38
Ring Sound, 22
Ring Volume, 23
System Select, 39
Voice Privacy, 39
Find Network, 40
Home Only, 40
Private Network, 40
7
Emergency Messages, 51
Reading Text Messages, 53
Saving/Deleting Text Messages, 54
Status of Messages, 53
Urgent Messages, 51
Time/Date, 39
Power, 38
Power On Lock, 38
Power On/Off, 16, 18, 22
Problems You Can Solve, 67
Profiles Menu, 43
Setup
Getting Started, 15
Sounds
5
Access Tone, 42
Ear Volume, 42
Earpiece Volume, 19
Key Sound, 42
Redialing, 25
Reset Menu, 44
Reset Profile, 44
Ring Sound, 22
Ring Volume, 23
Tone Send, 42
Troubleshooting, 67
Menu, 41
Message Alert, 43
Minute Alert, 42
Phone Silent, 41
Ring Sound, 42
Ring Volume, 42
Tone Send, 42
8
Up Arrow Key, 16, 18
Upper Side Key, 16, 19
6
Screen Calls, 43
Security Code, 27, 38
Setting
9
Vibrate, 42
Security Code, 38
Settings
Vibrating Option, 42
Speed Dial, 37
Stop Dialing, 25
Super Dial, 37
Symbols, 46
Voice Mail
Retrieving, 55
Storing Number, 55
Submenu, 35
Voice Privacy, 39
Volume Control, 19
Back Light, 39
Contrast, 39
Display Language, 22
Ear Volume, 24
System Select, 39
Index
71
<
YES Key, 16, 18
ꢉꢀ
,QGH[
ꢊ
ꢀ7ꢀꢁ/;
Select a highlighted Press <(6
Making and Answering Calls
Turn Phone On/Off Press and hold 12
menu setting
During Calls
Decrease ear volume Press lower side key
Answer a Call
*Open flip or press
<(6
End a Call
*Close flip or press
Increase ear volume
Access main menu
Mute your voice
during a call
Mute the ringer when 12 or either side key
a call is received
Work with Phone Lists
Add an entry
Recall an entry
Update Phone Groups Ñ or Ô 1 3
Work with Messages
Read new text
messages
Read old text
messages
Erase text messages
Save the text message Press and hold <(6
you are reading
Press upper side key
Press Ñ or Ô
Press and hold &/5
12
*Flip must be enabled: Ñ or Ô 3 3
Call the number Press <(6
shown in the
display
Activate Speed Dial Ñ or Ô 3 7
Activate Super Dial Ñ or Ô 3 8
Ñ or Ô 1 1
Ñ or Ô 1 2
Access the
outgoing call log
Press <(6
Dial the number
selected from the
outgoing call log
Erase the last digit
or letter entered
Erase all digits or
letters entered
While in Menu Mode
Go back one level Press 12
Return to Standby Press &/5
Scroll through
menu or menu
settings
Press <(6 (again)
Ñ or Ô 2 1
Ñ or Ô 2 2
Ñ or Ô 2 3
Press &/5
Press and hold &/5
Store your voice mail Ñ or Ô 2 5
access number
Quick access to call Press and hold ꢆ
voice mail number
Press Ñ or Ô
AE/LZT 123 5156 R2
Your Phone’s Display
Contrast
Back Light
Key Shortcuts
Access PHONE LISTS menu Ñ or Ô 1
Access MESSAGES menu
Access CALL MANAGER
menu
Access SETTINGS menu
Access SOUNDS menu
Access PROFILES menu
Access Profile Activation
Ñ or Ô 4 9
Ñ or Ô 4 8
Ñ or Ô 4 5
Ñ or Ô 2
Ñ or Ô 3
Language
Your Phone’s Sounds
Phone Silent
Ring Sound
Ring Volume
Vibrate
Ñ or Ô 4
Ñ or Ô 5
Ñ or Ô 6
Ñ or Ô 5 1
Ñ or Ô 5 2
Ñ or Ô 5 3
Ñ or Ô 5 4
Ñ or Ô 5 5
Ñ or Ô 5 6
Press and hold
Ñ
Ear Volume
Key Sound
Recall phone numbers
Press and hold
Ô
Reset Profile
Reset Menu
Ñ or Ô 6 5
Ñ or Ô 6 6
Your Phone’s Security
Lock Dial
Lock Receive
Security Code
Power-On Lock
Keypad Lock
Ñ or Ô 3 9
Ñ or Ô 3 0
Ñ or Ô 4 1
Ñ or Ô 4 2
Ñ or Ô 4 3
Making Emergency Calls
You will be able to dial 911 (or your
emergency number) at any time, regardless
of any call restrictions that you have set.
Making Calling Card Calls
Enter the number you want to call. Press
and hold <(6 until your calling card number
appear in the display. Release <(6 after the
number is displayed.
ꢁꢂꢃꢄꢅꢅꢆꢇꢈ
ꢊ
The T18LX Menu
Ô
<RXꢀFDQꢀTXLFNO\ꢀDFFHVVꢀVHYHUDOꢀFRPꢁ
PRQO\ꢀXVHGꢀPHQXVꢀE\ꢀSUHVVLQJꢀÑꢀRUꢀ
Ôꢂꢀ7KHꢀPHQXVꢀDUHꢀRUJDQL]HGꢀLQꢀDꢀFLUꢁ
FOHꢂꢀꢀ4XLFNO\ꢀDFFHVVꢀPHQXVꢀDQGꢀVHWꢁ
WLQJVꢀXVLQJꢀWKHꢀQXPEHUVꢀWKDWꢀDSSHDUꢀ
QH[WꢀWRꢀHDFKꢀPHQXꢀDQGꢀVHWWLQJꢂꢀ)RUꢀ
H[DPSOHꢃꢀDFFHVVꢀWKHꢀRing Volumeꢀ
VXEPHQXꢀE\ꢀSUHVVLQJꢀÑꢀRUꢀÔꢀDQGꢀ
WKHQꢀHQWHULQJꢀꢁꢀ3ꢂ
1. Activate
2. Screen Calls
3. Next Call Type
4. Reset Profile
5. Reset Menu
Ô
1. Phone Silent
2. Ring Sound
3. Ring Volume
4. Vibrate
5. Ear Volume
6. Key Sound
7. Access Tone
8. Minute Alert
9. Tone Send
0. Message Alert
1. Add Entry
2. Recall Entry
3. Phone Groups
4. Outgoing Log
5. Incoming Log
6. Calling Card 1
7. Calling Card 2
8. Default Card
9. Phone Number
0. Memory Used
1. Security Code
2. Power-On Lock
3. Keypad Lock
4. Time/Date
5. Language
6. Greeting
1. New Messages
2. Old Messages
3. Erase All
4. Memory Used
5. Voice Mail
7. Voice Privacy
8. Back Light
9. Contrast
0. System Select
1. Last Call
2. Call Totals
3. Answer Option
4. Auto Area
5. Auto Prefix
6. Auto Retry
7. Speed Dial
8. Super Dial
9. Lock Dial
0. Lock Receive
|