This is the Internet version of the user’s guide. © Print only for private use.
P910i
User Guide
This is the Internet version of the user’s guide. © Print only for private use.
Contents
Entering text with the flip closed..................................... 32
P910i locks....................................................................... 37
OVERVIEW
Introduction................................................................. 9
Getting to know your P910i...................................... 10
P910i package................................................................... 10
P910i overview................................................................. 11
SIM card ........................................................................... 12
Battery .............................................................................. 12
Care instructions............................................................... 13
First time start-up.............................................................. 14
Turning your P910i on and off ......................................... 14
Importing phone book entries........................................... 14
Flip closed mode............................................................... 15
Flip open mode ................................................................. 16
Flip removed..................................................................... 17
Screen areas ...................................................................... 18
Jog Dial ............................................................................ 19
Keypad functions ............................................................. 20
Indicators and status bar icons.......................................... 21
Memory Stick ................................................................... 22
Connecting the accessories............................................... 24
Services............................................................................. 25
Applications - overview.................................................... 25
Updating the software....................................................... 28
General functions.............................................................. 28
Phone.......................................................................... 40
Call handling with the flip closed.................................... 40
Call handling with the flip open ...................................... 43
Handling two or more calls.............................................. 45
Call list and call log ......................................................... 47
Hints and smart functions ................................................ 48
Preferences....................................................................... 53
MEDIA
CommuniCorder....................................................... 59
Recording video clips ...................................................... 59
Taking pictures ................................................................ 61
Camera settings................................................................ 63
Pictures and Image editor........................................ 64
Pictures ............................................................................ 64
Image editor ..................................................................... 66
Video .......................................................................... 68
Video clips ....................................................................... 68
Streaming......................................................................... 70
Preferences....................................................................... 71
3
This is the Internet version of the user’s guide. © Print only for private use.
Music player............................................................... 73
Playing sound files............................................................ 73
Managing sound files........................................................ 74
Calendar .................................................................. 108
Creating calendar entries................................................ 108
Managing calendar entries ............................................. 109
Sending and receiving calendar entries.......................... 110
Preferences..................................................................... 110
Internet....................................................................... 77
Using the browser view .................................................... 78
Preferences........................................................................ 83
Creating task entries....................................................... 111
Managing task entries .................................................... 112
Moving task entries........................................................ 112
Sending and receiving task entries................................. 113
Preferences..................................................................... 113
Games ......................................................................... 85
Chess................................................................................. 85
Solitaire............................................................................. 86
BUSINESS
Jotter ........................................................................ 114
Creating and editing notes ............................................. 114
Drawing pictures............................................................ 115
Managing notes.............................................................. 115
Sending and receiving notes .......................................... 115
Messages..................................................................... 87
Folders in Messages.......................................................... 88
The accounts in Messages ................................................ 89
Handling text messages .................................................... 89
Handling multimedia messages ........................................ 90
Handling email.................................................................. 94
More about messaging...................................................... 98
TOOLS
Sound recorder........................................................ 116
Making sound recordings............................................... 116
Using sound recordings as ring signals.......................... 117
Sending sound recordings.............................................. 117
Contacts.................................................................... 101
Using Contacts with the flip closed................................ 101
Using Contacts with the flip open .................................. 103
Creating and editing contacts.......................................... 104
Managing contacts.......................................................... 106
Making an owner card .................................................... 107
Preferences...................................................................... 107
Calculator ................................................................ 118
Time.......................................................................... 119
Setting time and date...................................................... 119
Specifying workdays...................................................... 120
4
This is the Internet version of the user’s guide. © Print only for private use.
Setting locations ............................................................. 120
Setting number formats .................................................. 120
Setting alarms ................................................................. 121
Synchronization and backup ................................. 139
Local synchronization.................................................... 139
Remote synchronization ................................................ 141
Backing up data ............................................................. 142
Common viewer and editor functions ............................ 122
Quickword ...................................................................... 123
Quicksheet ..................................................................... 123
Quickpoint ...................................................................... 124
Pdf+ .............................................................................. 125
SETTINGS
Personalizing your P910i........................................ 144
Themes........................................................................... 144
Changing your application shortcuts ............................. 144
Setting a background picture ......................................... 144
Setting the light intensity ............................................... 144
Setting a screen saver..................................................... 145
Adding images to your Contacts.................................... 145
Ring signals.................................................................... 145
Alarm tones and sound notification............................... 146
File manager ............................................................ 126
Online services......................................................... 128
ADVANCED FUNCTIONS
PC Suite and Content and Application ................. 129
Sony Ericsson PC Suite.................................................. 129
Content and Application CD .......................................... 130
Control panel........................................................... 147
The Device tab
Installing applications............................................. 131
Installing applications on your P910i............................. 131
Removing applications from your P910i........................ 133
Sony Ericsson Update Service........................................ 133
Application shortcuts ..................................................... 147
Display........................................................................... 147
Flight mode.................................................................... 149
International................................................................... 149
Locks.............................................................................. 149
Sounds and alerts ........................................................... 149
Text input....................................................................... 151
Themes........................................................................... 151
Time & date ................................................................... 152
Connecting to other devices.................................... 134
Connection via SyncStation............................................ 134
Connection via Infrared port........................................... 135
Connection via Bluetooth wireless technology .............. 136
5
This is the Internet version of the user’s guide. © Print only for private use.
User greeting................................................................... 153
REFERENCE
The Connections tab
Troubleshooting ...................................................... 178
Bluetooth......................................................................... 153
Cable............................................................................... 154
GSM Networks............................................................... 154
Internet accounts............................................................. 155
Messaging accounts........................................................ 159
WAP accounts ................................................................ 165
Guidelines for safe and efficient use...................... 184
Limited warranty............................................................ 186
FCC Statement............................................................... 188
Declaration of Conformity............................................. 188
Terms and definitions............................................. 189
Technical data ......................................................... 197
Index......................................................................... 201
The Other tab
Certificate manager......................................................... 166
Flip settings..................................................................... 167
Format disk..................................................................... 167
IP Security manager........................................................ 167
Language selection ......................................................... 167
Master reset..................................................................... 168
Secure tokens.................................................................. 168
Storage manager ............................................................. 169
WIM PIN settings........................................................... 170
Getting started with Internet and Messages......... 171
Introduction..................................................................... 171
Automatically set up service provider and messaging ... 172
Manually set up service provider.................................... 172
Manually set up messaging............................................. 173
Setting up WAP accounts ............................................... 174
Using your P910i as a modem........................................ 174
GPRS - connection information...................................... 176
6
This is the Internet version of the user’s guide. © Print only for private use.
Sony Ericsson P910i
Java and all Java-based trademarks and logos are trademarks or registered
trademarks of Sun Microsystems, Inc. in the U.S. and other countries.End-user
license agreement for Sun™ Java™ J2ME™:
User Guide
Second edition (December 2004)
This User Guide is published by Sony Ericsson Mobile Communications AB,
without any warranty. Improvements and changes to this User Guide necessitated
by typographical errors, inaccuracies of current information, or improvements to
programs and/or equipment, may be made by Sony Ericsson Mobile
Communications AB at any time and without notice. Such changes will, however,
be incorporated into new editions of this User Guide.
©Sony Ericsson Mobile Communications AB, 2004. All rights reserved.
Publication number: EN/LZT 162 02 R2A
The Bluetooth™ word mark and logos are owned by the Bluetooth SIG, Inc. and
any use of such marks by Sony Ericsson is under license.
Symbian and all Symbian-based marks and logos are trademarks of Symbian
Limited.
1. Restrictions: Software is confidential copyrighted information of Sun and title to
all copies is retained by Sun and/or its licensors. Customer shall not modify,
decompile, disassemble, decrypt, extract, or otherwise reverse engineer Software.
Software may not be leased, assigned, or sublicensed, in whole or in part.
2. Export Regulations: Software, including technical data, is subject to U.S. export
control laws, including the U.S. Export Administration Act and its associated
regulations, and may be subject to export or import regulations in other countries.
The Customer agrees to comply strictly with all such regulations and
acknowledges that it has the responsibility to obtain licenses to export, re-export,
or import Software. Software may not be downloaded, or otherwise exported or
re-exported (i) into, or to a national or resident of, Cuba, Iraq, Iran, North Korea,
Libya, Sudan, Syria (as such listing may be revised from time to time) or any
country to which the U.S. has embargoed goods; or (ii) to anyone on the U.S.
Treasury Department's list of Specially Designated Nations or the U.S. Commerce
Department's Table of Denial Orders.
Memory Stick™, Memory Stick Duo™ and Memory Stick PRO Duo™ are
trademarks of Sony, its parent and/or its affiliates.
Beatnik is a trademark of Beatnik, Inc.
T9™ Text Input is a trademark or a registered trademark of Tegic Communications
T9™ Text Input is licensed under one or more of the following: U.S. Pat. Nos.
5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554; Canadian Pat. No.
1,331,057, United Kingdom Pat. No. 2238414B, Hong Kong Standard Pat. No.
HK0940329; Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463
(96927260.8) DE/DK, FI, FR, IT, NL, PT, ES, SE, GB; and additional patents are
pending worldwide.
3. Restricted Rights: Use, duplication or disclosure by the United States
government is subject to the restrictions as set forth in the Rights in Technical Data
and Computer Software Clauses in DFARS 252.227-7013(c) (1) (ii) and FAR
52.227-19(c) (2) as applicable.
Copyright © SyncML initiative Ltd. (1999-2002). All rights reserved.
Portions of software © PacketVideo Corporation (USA) 1999, 2002. PacketVideo,
pvPlayer and the PacketVideo logo are trademarks of PacketVideo Corporation.
All rights reserved.
Quicksheet, Quickpoint, Quickoffice and Quickword are either trademarks or
registered trademarks of Cutting Edge Software, Inc.
Adobe and Acroba are either trademarks or registered trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
Microsoft Outlook, Visual Basic, Windows and PowerPoint are either registered
trademarks or trademarks of Microsoft Corporation in the Unites States and/or
other countries
Other product and company names mentioned herein may be the trademarks of
their respective owners.
Any rights not expressly granted herein are reserved.
Apple is a trademark of Apple Corporation, Inc.
AppForge is a trademark of AppForge, Inc
Lotus Notes and Lotus Organizer are trademarks of International Business
Machines Corporation in the United States, other countries, or both.
This product contains software copyright © Beatnik, Inc.
1996-2002.
Note Some of the services in this User Guide are not supported by all networks.
This also applies to the GSM International Emergency Number 112. Please contact
your network operator or service provider if you are in doubt whether you can use
a particular service or not.
7
This is the Internet version of the user’s guide. © Print only for private use.
Important
Your mobile phone has the capability to load, store and forward additional content,
e.g. ring tone melodies. The use of such content may be restricted or prohibited by
rights of third parties, including but not limited to restriction under applicable
copyright laws. You, and not Sony Ericsson, are entirely responsible for additional
content that you download to or forward from your mobile phone. Prior to your use
of any additional content, please verify that your intended use is properly licensed
or is otherwise authorized. Sony Ericsson does not guarantee the accuracy,
integrity or quality of any additional content or any other third-party content.
Under no circumstances will Sony Ericsson be liable in any way for your improper
use of additional content or other third party content.
8
This is the Internet version of the user’s guide. © Print only for private use.
OVERVIEW
Introduction
For ease of reference the Getting to know your P910i chapter
gives a quick overview of the main functions of the phone,
shortcuts and general information.
The P910i also contains an organizer,
which includes contacts, a calendar,
notes and email, all of which can be
quickly and efficiently synchronized
with a PC. The email application
supports attachments. Viewers let you
read and edit documents in various
formats such as Microsoft® Word and
Excel®.
Your P910i combines advanced business and entertainment
features in one intuitive device.
Its camera lets you take pictures and record video clips wherever
you are and use them in a wide range of applications. The
pictures can be used in the Picture Phone Book, where they can
be used to identify callers.
With Sony Ericsson Update Service
you can keep your phone updated with
the latest P910i software.
MMS (Multimedia Messaging Service) allows you to send and
receive messages that include pictures, sound, text and voice
notes.
The complete P910i documentation
consists of the following parts:
The P910i features advanced entertainment functionality that
offers high quality MP3 music and widescreen format video
clips and 3D games. New content can be downloaded quickly
and easily from Internet sites or transferred to the phone via
Bluetooth™ Wireless Technology, an infrared port or a cable.
Extra memory is available through a Memory Stick™ , which
also serves as a convenient way to exchange content and
applications such as Java™ games.
•
•
•
•
•
Quick Guide
User Guide
Instruction for removing the flip
Help texts in the P910i
Complementary information on the Internet, refer to
www.SonyEricsson.com
The P910i can be used as a corporate phone with PBXes such as
Ericsson MD110.
Introduction
9
This is the Internet version of the user’s guide. © Print only for private use.
Getting to know your P910i
P910i package
A
B
C
D
E
F
P910i with stylus
Battery
M
Travel charger
SyncStation
A
Stereo headset
P910i
Protective carry case and strap
Extra stylus
G
H
J
Memory Stick
F
B
Memory Stick adapter
Flip replacement cover
Flip replacement tool set
User documentation package
Two CDs, Sony Ericsson PC Suite and Content and Application
K
L
D
M
N
L
N
K
C
Note The design of the charger will differ depending on the
market.
H
Note If your package does not include all the listed items above,
please contact your retailer.
J
E
G
Note Before you can use your P910i you need to insert the SIM
card, and insert and charge the battery. Always detach the
charger before you insert or remove the SIM card.
10
Getting to know your P910i
This is the Internet version of the user’s guide. © Print only for private use.
P910i overview
A
B
F
A
D
C
G
E
F
D
H
I
B
G
C
E
A
B
C
D
E
F
G
H
I
Stylus
A
B
C
D
E
F
Indicator light for Bluetooth wireless technology (blue)
Screen
External antenna connector
CommuniCorder
Flip with keypad and keyboard
Battery compartment
Connector for accessories and charger
Connector for stereo headset
Jog Dial
Indicator light for network and battery (green/red)
CommuniCorder activation and shutter release
Internet button for activation of the browser
Slot for Memory Stick
G
Infrared port
On/Off button
Getting to know your P910i
11
This is the Internet version of the user’s guide. © Print only for private use.
SIM card
Battery
When you register as a subscriber with
a network operator, you receive a SIM
(Subscriber Identity Module) card. The
SIM card contains a computer chip that
keeps track of your phone number, the
services included in your subscription
and your phone book information,
among other things.
provided for at least 4 hours. Use the supplied charger. See
‘Charging the battery’ on page 13.
Insertion and removal
To insert the battery
1. Ensure that the flip is closed.
A PIN (Personal Identity Number)
code is supplied with the SIM card
from your operator and must be entered
when switching on the P910i.
2. Remove the battery cover by
sliding it downwards.
3. Place the battery in the battery
compartment and close the
cover.
Open the battery cover by pressing sligthly on its upper part and
slide it down the P910i. Insert the SIM card as shown in the
picture.
To remove the battery
1. Ensure that your P910i is
turned off.
Some subscriptions are limited to call only predefined numbers,
so-called Fixed Dialling Numbers (FDN). To avoid problems
when travelling abroad, these predefined numbers should be
defined as international numbers starting with +, for example
+4613244500. In order to speed up calling while at home, the
same numbers can also be added in the national number format,
for example 013244500.
Note It is important that you always turn off your P910i before
removing the battery. Failure to do so can result in loss of
information.
2. Remove the battery cover by sliding it downwards.
3. Use your fingernail at the lower left-hand edge of the battery
to gently lift the lower edge of the battery outwards.
For more information. see ‘Copying contacts to and from the
SIM card’ on page 106.
4. Take out the battery.
12
Getting to know your P910i
This is the Internet version of the user’s guide. © Print only for private use.
4. Wait approximately 4 hours or
Charging the battery
until the battery meter on the
•
When the battery needs to be charged, a beep is heard. The
indicator light (on the top of your P910i) flashes red and a
battery low message appears on the screen.
screen is full and the indicator
on the top of the P910i shows
a steady green light.
•
The battery can be charged whenever you want. The P910i
performance is not affected. However, using your P910i
while charging increases the charging time.
5. Remove the charger by tilting
the plug upwards.
Tip You can also use other battery chargers that have been
supplied with other Sony Ericsson mobile phones using the same
connector plug, for example, T300 or P900.
To charge the battery
The P910i can be charged either when it is switched on or off.
1. Make sure the battery is inserted in your P910i and the cover
is closed.
Note When the battery is completely discharged, or new, it may
take up to 30 minutes before the battery icon
screen.
appears on the
2. Connect the charger to
the P910i at the base of
the phone by the flash
symbol. The charger
plug flash symbol must
face upwards.
Care instructions
Your P910i is a highly sophisticated electronic device. To get
the most out of it, please make sure that you follow this advice:
3. Connect the charger to the mains.
•
•
•
Keep the P910i in its protective carry case when not using it.
Use a lightly moistened cloth when you clean the screen.
Use only the stylus provided to tap the screen.
Charging is indicated by the battery icon
on the screen
pulsing continuously, and the indicator at the top of the P910i
showing a steady red light (or green, if the P910i is switched
on).
See also ‘Battery Use and Care’ on page 185.
Getting to know your P910i
13
This is the Internet version of the user’s guide. © Print only for private use.
phones is not allowed, or if you want to use the other functions
but do not want incoming calls.
First time start-up
Please read ‘Guidelines for safe and efficient use’ on page 184
before you start using your P910i.
will proceed slowly.
Importing phone book entries
You may want to import existing contact information from
When you start your P910i for the first time
another mobile phone to your P910i. You can do this in several
ways:
1. Press the On/Off button to turn on your P910i, keeping the flip
closed. The language selection dialog opens.
•
Beam the phone book entries from the other phone by
2. Select one of the languages from the list. Read more about
infrared or Bluetooth wireless technology and save the set to
Contacts. See ‘Creating and editing contacts’ on
page 104.
selecting a language in ‘Language selection’ on page 167.
3. Open the flip. Press the On/Off button again. The Setup Wizard
starts and guides you through the essential settings.
•
phone with Microsoft Outlook or Lotus Notes in a PC. Then
4. The Power menu opens. Select Phone on.
5. Enter your PIN when the dialog box appears and press
synchronize this information with
Contacts.
. Press
to delete a digit.
Note When you synchronize Contacts with your PC, the SIM
information will not be synchronized. You might get two versions
of the same contact. See ‘Synchronization and backup’ on
page 139.
Turning your P910i on and off
By default the Power menu prompts you to choose normal
operation or Flight mode each time you press the On/Off button.
These settings can be turned off. See ‘To use the Power menu’
on page 49.
•
Phone book entries stored on your SIM card are accessible
through Contacts. Select SIM in the folders menu to the
right in the menu bar to see the list of entries in your SIM
phone book. These entries can be imported to
See ‘Copying contacts to and from the SIM card’ on
page 106.
Contacts
.
In Flight mode the phone radio transmitter and Bluetooth
functions are switched off, but you can still use the other
14
Getting to know your P910i
This is the Internet version of the user’s guide. © Print only for private use.
D
E
Shortcut to the Calendar application
Flip closed mode
Shows all applications available in flip closed mode
With the keypad flip closed, the P910i can be used as a
conventional mobile phone using the keypad to dial and the Jog
Dial to navigate. For more information please see ‘Jog Dial’ on
page 19 and ‘Keypad functions’ on page 20.
C
B
D
A
You can open the flip at any time to continue working. Many
more functions are available when the flip is open.
Applications
CommuniCorder
Sony Ericsson
E
1
2
3
4
5
6
7
8
Music player
Messages
Contacts
Calendar
Tasks
Standby view
11:20am
Call list
21/066/2004
Applications
Jotter
The standby view shows shortcuts to the most commonly used
applications. Choose which shortcuts you want to use in
standby. See ‘Personalizing your P910i’ on page 144.
Sound recorder
Selecting and starting applications
Rotate the Jog Dial to select an application. Press the Jog Dial
1
2
3
4
5
6
7
8
9
CommuniCorder
Music player
Messages
Contacts
Calendar
Tasks
inwards or
to start the application.
Tip When
view is selected, it is also possible to start an
Jotter
Sound recorder
application by pressing its specific number.
Connections
Closing applications
The current application automatically closes and the data is
saved when you return to the standby view or switch to another
application. To return to standby, press and hold
Jog Dial backwards.
Touch the Jog Dial to see the shortcut icons
A
B
C
Shortcut to the Messages application
Shortcut to the Contacts application
Shortcut to the Call list application
or press the
Getting to know your P910i
15
This is the Internet version of the user’s guide. © Print only for private use.
Options menu
Press
or press the Jog Dial forwards to open the standby
C
D
E
B
options menu to get access to keylock, battery status, accepted
callers and more.
F
CommuniCorder
Pictures
A
Video
Music player
Internet
Flip open mode
Messages
Contacts
Phone
Applications Edit
All
When the flip is opened, the large touch-screen is revealed. You
use the stylus to tap the screen to navigate and enter data. There
is also a handwriting recognition feature, so that you can use the
stylus to write on the screen.
CommuniCorder
Pictures
Video
Calendar
Music player
Tasks
Jotter
Messages
Contacts
Phone
Control panel
Calculator
Quicksheet
A
B
C
D
E
F
Shortcut to the Messages application
Shortcut to the Contacts application
Shortcut to the Phone application
Calendar
Tasks
Jotter
Quickword
Pdf+
Sound recorder
Controlpanel
Calculator
PDF
Shortcut to the Calendar application
Shortcut to the Internet application
Shows all applications available in flip open mode
File manager
Storage wizard
Remote Sync
Demo
GPRS data log
Chess
You can change the shortcuts A-E. See ‘Changing your
application shortcuts’ on page 144.
Solitaire
i
Online services
Time
16
Getting to know your P910i
This is the Internet version of the user’s guide. © Print only for private use.
The Jog Dial provides further navigation and selection
capability. Closing the flip generally ends an activity and saves
You can use a virtual flip when the real flip is removed. Tap the
the data. Multimedia phone calls and data sessions will,
Virtual flip
Enable virtual flip checkbox in
settings and select the check box to activate it. When the virtual
Control Panel > Other > Flip
however, continue.
flip is enabled,
flip is open. Select
is shown on the status bar when the virtual
to ‘close’ the virtual flip.
Navigation
When the flip is open, the application shortcut icons shown in
the flip closed mode move to the top row in the flip open screen.
You navigate by using the stylus and tapping selected items and
by using the Jog Dial, see ‘Jog Dial’ on page 19.
When the virtual flip is closed, the virtual flip keypad is shown.
Select to ‘open’ the virtual flip.
Flip removed
The flip can also be removed, which makes the organizer
applications easier to access. When the flip is removed, the
P910i works in flip open mode.
Note Turn off the P910i before you remove the flip to avoid to
damage your phone.
To remove and attach the flip, refer to the separate instructions.
Note Please note that Sony Ericsson does not accept any
liability for lost parts or product defects resulting from any
disassembly or modification of the product.
Getting to know your P910i
17
This is the Internet version of the user’s guide. © Print only for private use.
B Menu bar Usually contains two menus on the left, and a folder
Screen areas
menu on the right. The two left-hand menus contain:
• the application menu, whose name is always the
same as the application. It contains the system
When the flip is closed, you use the keyboard and the Jog Dial.
When the flip is open the screen is touch-sensitive. The screen is
divided into a number of areas: see the figure and table below.
services used by most applications, such as Find
,
A
Send as, and Delete
• the edit menus contain editing items such as Cut
Preferences and Help.
.
E
F
I
n
te
r
t
B
11:03
,
John Smith
+4613244500 (h)
Copy Paste, Zoom,
,
With the flip closed, the menu bar often shows the
function of the key.
C Application Applications use this central area of the screen to
C
B
C
area
display the essential information.
Many of the applications are based on two standard
view layouts: a list view and a detail view.
Sony Ericsson
End call
D
E
D Button bar An application view displays a button bar that
contains useful controls and shortcuts. Not all
application views require a button bar.
E Status bar Displays device status information such as: signal
strength, battery and device information, settings for
sounds and time, on-screen keyboard, as well as
temporary indicators such as missed calls and unread
messages.
Item
Description
A Application Displays six icons for quick and easy access to the
picker most common applications. These can be customized.
F Title bar
Displays the name of the active application.
18
Getting to know your P910i
This is the Internet version of the user’s guide. © Print only for private use.
Jog Dial
Action
Function
Up
Rotate the Jog Dial Scrolls items in a list up/to the left, increases
up
volume during a call, moves back a page when
playing a multimedia message.
Rotate the Jog Dial Scrolls items in a list down/to the right,
down
decreases volume during a call, moves forward
a page when playing a multimedia message.
Down
Press the Jog Dial
inwards
Selects a highlighted item, dials selected phone
numbers. Generally the same action as
in flip closed.
Press the Jog Dial
backwards
Goes back to the previous screen, dismisses
dialogs, and sends a busy signal to the calling
party when you receive a call. It will not end a
Inwards
call. Always the same action as
closed and in flip open.
in flip
Press the Jog Dial
forwards
Flip closed: Brings up the Options menu. Press
and hold takes you to the Applications list.
Flip open: Toggles the Application, Edit and
Category menus. Press and hold takes you to
the Application launcher.
Backwards
Forwards
Getting to know your P910i
19
This is the Internet version of the user’s guide. © Print only for private use.
Key
Function
Keypad functions
STAR
Key
Function
• Enter the character
*.
• Press and hold to enter a
p
(pause) character.
OK
• Press to switch between different input modes
(Abc, 123 ... ). This is useful when writing SMS
or similar texts.
• Press and hold to change between T9 and
multitap.
• Enter selected function, indicated on the display
above the key.
BACK
• Return to previous menu.
• Reject an incoming call.
• Press and hold to return to Standby.
HASH
• Enter the character #.
CLEAR
• Press and hold to see a list with special
characters.
• Terminate the input of PIN and security codes.
• Retrieve a phone number from the SIM card
phone book. Enter the number of the memory
• Delete entered characters/digits from the screen
one by one.
• Press and hold to delete an entire row of entered
characters/digits.
• Delete an entry from Contacts, Calendar, Tasks,
Sound Recorder, and Messages.
• Press and hold to disconnect the microphone
(mute function) when a call is in progress.
• Mute the ring signal during an incoming call.
• Pause/play the melody when the Music player is
open.
position and then press
.
-
NUMERIC KEYS
• Enter the digits 0 to 9.
• Enter associated characters or perform associated
functions. See ‘Shortcuts’ on page 42.
• Press and hold digits 1 to 9 to open Contacts.
• Press and hold to put the P910i into silent mode,
when in the standby view.
OPTIONS
• Open the menu with different options for
different applications.
• Press and hold to open Applications.
20
Getting to know your P910i
This is the Internet version of the user’s guide. © Print only for private use.
Icon
Function
Indicators and status bar icons
Calls screened
These icons appear in the flip closed standby screen or in the
status bar when the flip is open. When the flip is open, you can
often tap the icons to get more detailed information or start an
application.
SMS notification
MMS notification
Email notification
SMS overflow
Time
Icon
Function
Signal strength, GPRS avialable
Signal strength, GPRS not avialable
Battery strength
Time, alarm set
Keylock
Bluetooth on
Bluetooth discoverable
Bluetooth headset connected
Infrared on
Magic word
Keyboard
Multimedia volume
Speakerphone
Muted microphone
Silent mode
GPRS active
GPRS data transfer in progress
Ongoing data call
Ongoing call
Home network
Voicemail notification
Missed call
Divert all calls notification
Getting to know your P910i
21
This is the Internet version of the user’s guide. © Print only for private use.
Note Insert the Memory Stick correctly to avoid damage to your
P910i or the Memory Stick.
Memory Stick
Memory Sticks provide a convenient way of increasing the
The Memory Stick supplied with the P910i may or may not be a
version that contains the lock function. Remember, you can
overwrite existing files without the lock function.
storage space in the phone. You can use both Memory Stick
Duo™ and Memory Stick PRO Duo™ in your P910i. Memory
Sticks used in P800 or P900 can be used in P910i but you cannot
use a P910i Memory Stick PRO Duo™ in P800 or P900. You can
save pictures, video clips, music, and voice recordings as well as
computer data and applications on a Memory Stick and use it to
store or transfer the contents for many different purposes. These
include:
To remove the Memory Stick
Press the edge of the Memory Stick using your fingernail or the
stylus to release it. You hear a click as it jumps out of the slot.
Note Be careful not to drop the Memory Stick when removing it.
•
•
•
•
•
•
Storing backup copies of important files.
Renaming a Memory Stick
Storing media for personalizing your P910i.
Storing media for use when composing MMS messages.
Storing installation files for new applications.
Transferring data between the P910i and a PC or Mac.
Providing storage for third-party applications.
You can rename a Memory Stick to give it a name that is
meaningful to you. The name you set will be shown in the
divider between internal and external storage in the folder menu.
See ‘Folders’ on page 28. There are two ways to rename a
Memory Stick:
To insert the Memory Stick
•
Select
See ‘Format disk’ on page 167.
Select
Control Panel > Other > Format disk and tap Rename.
1. Open the cover for the Memory
Stick slot.
•
File manager > File > Format disk and tap Rename
.
2. Insert the Memory Stick in the
slot, with the connector side
towards the back (see picture).
Make sure it is securely inserted.
A click should be heard.
Renaming will not erase any data.
Copying and moving data
For information on how to copy and move data to and from the
Memory Stick, refer to ‘Folders’ on page 28.
22
Getting to know your P910i
This is the Internet version of the user’s guide. © Print only for private use.
Compatibility
Formatting a Memory Stick
The P910i defines its own folder structure on a Memory Stick.
New Memory Sticks are normally automatically formatted first
Each application has its own set of folders. A folder created in
time they are inserted in a phone. The phone stops working
one application is not visible in another.
during the formatting and it can take some time.
Other devices must access the same folder structure to interact
Note Do not remove a Memory Stick during formatting. If
with the P910i files. If you are using a PC, this is easily done by
removed it will be unusable.
browsing to the required folder on the Memory Stick.
If you need to reformat a Memory Stick, select
> Other > Format disk and tap Format, or select
File > Format disk and tap Format. When you format a Memory
Stick, you delete all the information on it, including any
applications that you may have installed.
Control Panel
File manager >
Memory Stick enabled devices which do not allow you to
browse and manage a folder structure may not be able to share
data directly with the applications in your P910i (for example,
Memory Stick enabled digital cameras). However, the File
Manager can access these files and move them into the correct
folders for use by the applications. When your P910i is
connected to your PC, you also have access to the P910i folder
Sharing data with other devices
Your P910i uses the shorter Memory Stick variants, Memory
Stick Duo and Memory Stick PRO Duo.
structure as well as other Memory Stick content in My P910i
.
Personal computer support
Memory Stick adapter
Both PCs and Apple computers may be enabled for Memory
Stick use via built-in Memory Stick slots, floppy disk adapters,
PC card adapters, and Memory Stick enabled mouses. (Memory
Stick adapter required.)
Use the Memory Stick adapter when using your Memory Stick
in a device equipped with a regular sized Memory Stick, for
example a personal computer. Insert your Memory Stick
according to the picture on the adapter.
For more information about Sony Memory Stick, visit
Warning! Do not insert a Memory Stick adapter without a
Memory Stick into a Memory Stick slot. This may damage the
product. Always insert the adapter in the slot with the connector
end (marked with a triangle) first.
www.memorystick.com.
Getting to know your P910i
23
This is the Internet version of the user’s guide. © Print only for private use.
A
The travel charger is connected to the SyncStation or to the P910i.
Note The design of the charger will differ depending on the
market.
Connecting the accessories
E
C
B
C
D
The USB connector from the SyncStation is connected to a PC.
The headset is connected to the P910i.
Other accessories can be connected to the connector at the base of
the P910i.
E
A car holder can be connected to the antenna connector at the rear.
Note Remove the plastic plug before connecting the P910i to the
car holder.
B
D
The wrist strap is threaded through
the holes next to the connector at
the bottom of the P910i.
A
24
Getting to know your P910i
This is the Internet version of the user’s guide. © Print only for private use.
You can uninstall the demo application and also reinstall it from
the Content and Application CD. See ‘Removing applications
from your P910i’ on page 133 for how to uninstall the demo
Services
You need the following services to use the P910i functions:
application and ‘Installing applications on your P910i’ on
page 131 for how to reinstall it.
To use...
You need...
phone services
text messaging (SMS)
GSM subscription
GSM subscription
To start the demo
multimedia messaging (MMS) MMS account, GSM data subscription
1. Select the Applications icon
.
email
email account, GSM data subscription
2. Select the Demo icon
and the demo starts.
Internet
Internet account, WAP account (only
for WAP 1.x services), GSM data
subscription
To stop the demo
Tap the screen or rotate the Jog Dial to stop the demo.
The demo also stops when any other dialog is opened.
data communication
GSM data subscription
Please consult your network operator and Internet service
provider about the services that are available to you.
Note When the flip is open, an incoming text or MMS message
will not stop the demo.
The Demo application can be launched also when the P910i is
started without a SIM card inserted. When the P910i asks you to
insert the SIM card, just press OK. If the flip is closed, open it.
Applications - overview
You can start applications in different ways. Select icons in the
standby view (flip closed) and in the application picker (flip
Phone
open) to start the most important ones. Select
applications.
to list all
This is the mobile phone application. When the flip is opened,
select
to start it.
Demo application (Not in all phone versions)
The Demo application shows some of the most common
functions in your P910i. You can release this application to
remove memory.
Getting to know your P910i
25
This is the Internet version of the user’s guide. © Print only for private use.
Call list
Music player
The call list displays the most recent calls, either outgoing,
incoming or missed. In flip closed, press the Jog Dial or
to call the selected entry. To view the call list when the flip is
open, open Phone and tap the call list icon.
Plays music tracks and other audio files. You can download
these from the Internet or transfer them from your PC. The
player supports the most common sound formats. You can save
music tracks on the Memory Stick.
CommuniCorder
Internet (flip open only)
For taking video clips and still pictures. In CommuniCorder
view, the screen becomes a viewfinder. Press the
CommuniCorder button or the Jog Dial to start recording or take
a photo. Alternatively tap the red button at the bottom of the
screen.
The Internet browser can access both Web and WAP pages. It
can also download images, video clips, audio files, and Java
applications.
Messages
You can read, create, send and delete text (SMS), multimedia
(MMS) and email messages in this view.
Pictures (flip open only)
Manages your pictures. You can take pictures with
CommuniCorder, or receive them via email, Bluetooth wireless
technology and infrared communication. Download via the
Internet browser, or transfer them from your PC. With the image
editor you can also edit your pictures.
Contacts
Displays a list of your contacts. Select a contact to view
associated contact data.
Calendar
Video (flip open only)
The Calendar view displays entries for the current day. Use the
Jog Dial to get more information about a selected entry or to
change days.
Plays video clips. You can record video clips with
CommuniCorder, download them from Internet or transfer them
from your PC. You can stream video and audio from the
Internet.
Tasks
Keeps track of your tasks. Set due date, alarm, priority, and so
on, for all your tasks and let your P910i remind you in time.
26
Getting to know your P910i
This is the Internet version of the user’s guide. © Print only for private use.
Quicksheet,
Quickword,
Quickpoint,
File manager (flip open only)
You can handle the content and organization of media, both in
the P910i and on the Memory Stick.
PDF
Pdf+ (flip open only)
Use them to view and edit various types of documents.
Quickpoint- and Pdf-documents cannot be edited.
Storage Wizard (flip open only)
Helps you to release memory. The icon
bar when the memory is running short. Tap it to start the Storage
Wizard.
appears in the status
Jotter
Displays a list of stored entries. In detailed view, the complete
entry is displayed.
Remote Sync (flip open only)
Control panel (flip open only)
Performs synchronization over the air. Using GPRS, the P910i
can be continuously connected to the remote synchronization
server. Remote Sync works equally well over CSD or HSCSD.
Contains all settings that are system-wide and affect more than
one application. This is the main view to use when initially
setting up your P910i.
Online services
i
Note Settings for Flight mode and P910i locks are located
Your service provider may offer different services, for example,
weather forecasts, financial information or newsletters. Contact
your service provider for more information.
under Control panel > Device
Calculator (flip open only)
A standard 10-digit calculator. You can add, subtract, multiply,
divide, calculate square roots and percentages.
GPRS data log (flip open only)
A list of GPRS Internet accounts. Open an account to view your
logged GPRS traffic, including your costs. The P910i creates a
new data log when a connection to an account is created.
Sound recorder
You can use your P910i as a sound recorder.
Connections (flip closed only)
Time (flip open only)
Set the way you communicate with your PC or other devices.
Select between infrared, Bluetooth wireless technology and
cable. In the cable menu, you can also select whether the P910i
synchronizes with a PC or acts as a wireless modem.
Shows time and date. You can set your current location and
another. You can also set different alarms.
Getting to know your P910i
27
This is the Internet version of the user’s guide. © Print only for private use.
a handheld device. If you make it a habit to set up specific
Updating the software
folders to suit your needs and use them to categorize all your
With Sony Ericsson Update Service you can keep your phone
information, working with it becomes easy.
updated with the latest P910i software. See “Sony Ericsson
Update Service” on page 133 how to download the software
from the Internet.
Each application has its own set of folders. A folder created in
one application is not visible in another.
For each application there is a default Unfiled folder. Since there
is no way of seeing on your P910i, whether a file in an Unfiled
folder is located on your P910i or on a Memory Stick, we
recommend that you move files to your own folders as soon as
possible.
General functions
Application launcher views
Every item created in an application is always assigned to a
single folder, by default the folder as displayed in the list view.
•
•
List view (small icons appear in one column)
Icon view (large icons appear in two columns)
In list view, the folder menu is used to organize your entries. In
detail view, the folder menu allows you to change the folder of
the current item.
Folders
Using the folder menu
In the applications that use folders you can see the folder menu
to the right in the menu bar.
Folders are used to organize information, for example contacts,
jotter entries, or task lists. You might want to organize your
contacts in business and personal folders.
When a Memory Stick is available in the P910i, the folders on it
are shown in the folder menu under the divider. If you rename
the disk (see ‘Renaming a Memory Stick’ on page 22) the
divider will show the new name.
Folders are also used when managing files of different types on
your P910i and Memory Stick. You might want to move or copy
sound files into a sound track folder to store on a Memory Stick.
As you may notice, if you connect your P910i to a PC and view
the contents of your P910i in My P910i, it is easier to get an
overview of a folder and file structure on a large screen than on
In list view, there is a super-folder called All, which, when
selected, displays items from all folders (in
Contacts, the All
28
Getting to know your P910i
This is the Internet version of the user’s guide. © Print only for private use.
folder does not display the entries in the SIM phone book). All is
the default value in list views and when an application is first
launched.
To copy a file to another folder
1. Open the file in detail view. In the folder menu, select the
destination folder. Select Copy to in the main application
menu; for example Music or Pictures
.
Use the Edit Folders menu item to:
2. Select the destination Folder from the list and tap Copy.
•
Rename a folder, or move a folder to or from the Memory
Stick. Select the folder you want to move or rename, tap Edit
type the name of the new folder, and choose a Location from
,
Tip To delete multiple files in an application you can use
Storage manager. See ‘Deleting or copying general files’ on
page 169.
the list. Tap Done
To add a new folder. Tap Add, enter a folder Name and choose
Location from the list Tap Done
.
•
•
a
.
.
Managing your files
To delete a folder. Select the folder you want to delete and tap
Delete. A folder can only be deleted if it is empty. Not all
folders can be deleted.
Using the File Manager, you can handle the content and
organization of media, both in the P910i and on the Memory
Stick. See ‘File manager’ on page 126.
You can also use the Storage manager in the Control Panel. See
‘Storage manager’ on page 169.
To copy all the files in a folder to another folder
1. From within an application such as Pictures or Video, select a
folder from the folder menu. From the application menu, first
Zooming
select Select all and then Copy
.
You can change the size of the screen fonts. Choose between
2. Select the destination Folder from the list and select Copy.
Small, Medium or Large. From the menu bar, tap Edit > Zoom.
To move a file from one folder to another
Open the file in detail view. In the folder menu, select the
destination folder.
Automatic saving
When you work in an application and leave it, your work is
automatically saved.
Getting to know your P910i
29
This is the Internet version of the user’s guide. © Print only for private use.
To send an item using Send as
Find
1. Enter the Send as menu in the specific application.
The Find function searches through all the items stored in an
application. The standard Find dialog contains a single text edit
box with two buttons, Find and Cancel. Selecting Find starts the
search, while Cancel closes the Find dialog.
2. Depending on the application and item, you can choose
between the following transfer methods:
•
•
•
•
•
Text message (using SMS): P910i will create a new text
message. Add the mobile number of the recipient and tap
In some applications, for example Messages, Find may be more
advanced:
Send
.
Email: the P910i will create a new message with the item
included as an attachment. Complete with address and
•
The size of each message is so large that you may want to
restrict the search to the current message only.
subject, and tap Send
.
•
Folders are potentially more significant, so you may want to
restrict the search to the current folder only.
Multimedia message (using MMS): the P910i will create a new
message with the item included as an attachment. Complete
the message and tap Send
.
Sorting your files
Infrared: align the infrared port of the P910i with the infrared
port of the other device. Select Send. Messages on screen will
tell you when the information has been transferred.
You can sort the files you have stored in your P910i. By sorting
your files, you choose in which order you want the files to be
displayed on the screen. You can choose between sorting by, for
example type, size, date, or name.
Bluetooth wireless technology: the P910i will search the local
area for Bluetooth devices that are set to be visible. These
will be presented in a list. Select a device to which the item is
to be sent and select Send. Progress messages will tell you
when the information has been transferred.
Note Sort is not included in all applications.
Sending and receiving items
From many applications it is possible to exchange items like
appointments, contacts and images.
Tip The other devices must have Bluetooth wireless technology
enabled. You can select Refresh to perform a new search if, for
example, a destination device was not enabled at first.
30
Getting to know your P910i
This is the Internet version of the user’s guide. © Print only for private use.
To handle items received in email and multimedia messages
•
•
Memory Stick (expansion memory).
1. Tap the notification icon
, or
SIM card, for phone numbers and associated names. See
open Messages and select MMS or an email inbox.
2. Open the message.
‘Copying contacts to and from the SIM card’ on page 106.
•
Other memory-expansion alternatives available on the
market.
3. Select the attachments tab.
4. Select the required attachment. The attachment or a summary
of the attachment will be displayed.
Getting help and setting zoom
From the menu bar tap Edit > Help to get to the P910i help system
or set the zoom level. The help system uses two views:
5. Select Save to save the item. You may optionally display the
received item within the related application.
•
The Topics view shows all available topics, for example both
specific application topics and general topics.
See ‘Messages’ on page 87 for more information.
To receive beamed items
•
The Detail view presents the title and text of a single topic.
1. Ensure that infrared or Bluetooth wireless technology is
activated and, for infrared, that the infrared ports are aligned.
The Topics view allows you to select a topic, which opens the
detail view and displays the selected topic.
2. The received item will be notified by a dialog box listing the
item(s) received. When using Bluetooth you will also be
asked to accept or reject the connection.
In many dialog boxes you can select the Help icon
upper right corner.
in the
3. Select View to view item. Select Done to save the item in the
Settings
Beamed inbox in Messages. Select Delete to delete the item.
For settings that are application-specific, tap Edit > Preferences in
the application menu bar. For generic settings, use Control panel
.
Methods for storing data
Your P910i can store data in different ways:
•
Internal memory. Used for storing pictures, messages, music,
applications, and so on.
Getting to know your P910i
31
This is the Internet version of the user’s guide. © Print only for private use.
•
Press
mode.
to switch between the input types in text edit
Entering text with the flip
closed
Inserting symbols
When you are editing text you can press
on the application, choose Add symbol or Text options > Add symbol
to select an item from the symbol selector table. Use the Jog
With the flip closed, you use the keypad keys to enter text, for
example, when writing a text message. When you press a key, a
pre-edit box with the different characters on that key is shown in
the title area:
and, depending
Dial to select the row and press
row to select a symbol and press
. Then scroll within the
.
If the same key is pressed again, the next character in the pre-
edit box will be selected.
T9® text input
The
key deletes the character to the left of the cursor. If
continuously pressed, the
and then whole words.
key deletes several characters
You can use T9™ Text Input when writing, for example text
messages and email. The T9 Text Input method uses a built-in
dictionary to recognise the most commonly used word for each
sequence of key presses. This way, you press each key only
once, even when the letter you want is not the first letter on the
Types of text input
There are four text input types:
key. Press and hold
to change input method.
•
Abc – initial uppercase letter, the rest lowercase. Default for
each new text edit field.
123 – numeric entry only
ABC – uppercase entry
abc – lowercase entry
The following example shows how to start writing a text.
•
•
•
To enter letters using T9 Text Input
1. Select, for example, Messages > Create SMS
.
2. For example, if you want to write the word ‘Jane’, press
.
When you are editing text you can:
During text entry, a suggestion list with word candidates are
presented. The most frequently used word is highlighted.
•
Press
input type.
and select Text options > Input type to select text
3. If the word is the word you want:
32
Getting to know your P910i
This is the Internet version of the user’s guide. © Print only for private use.
– Press
or
to accept and add a space.
•
Use T9 Use multitap, to switch between T9 Text Input and
/
multitap text input
If the word is not the one you want:
•
•
Add symbol, adds symbols and punctuation marks.
– Scroll with the Jog Dial up or down to view alternative
Input type, changes the text input type between Abc
,
abc, ABC
words (candidates). Press
add a space.
to accept the word and
and 123
.
•
Copy all Paste, to copy all text to the clipboard, and for
/
If you do not find the word you want:
– Press to go to a list of options.
pasting the copied text to the place of the text cursor.
– Select Text options > Spell word
.
Entering text with the flip open
– Edit the word using multitap text input and press OK.The
word is added to the user dictionary. The next time you
enter the word, it will appear as one of the alternative
words.
There are three ways of entering text with the flip open:
•
Use the on-screen keyboard
screen.
located at the bottom of the
4. Continue writing your message.
•
•
Write directly on the screen using the stylus.
Use the keyboard on the inside of the flip.
Press
to enter a full stop. To enter other punctuation
and use the Jog Dial.
marks, press
If you press
and select Text options when writing, you get
a list of options:
•
•
•
•
Spell word, to edit the entered word.
My words, to view the user dictionary.
Language, to change language.
Show suggestion list Hide suggestion list, to switch the
/
candidates window on and off.
Getting to know your P910i
33
This is the Internet version of the user’s guide. © Print only for private use.
On-screen
keyboard
When you need to edit text,
tap the keyboard icon in the
status bar and then select
characters. Tap Done when
ready.
Handwriting recognition
Handwriting recognition
translates stylus gestures
C
a
l
e
nd
a
rEdit
Unfiled
Weekly meeting
C
o
tactsEdit
n
Unfiled
into letters, numbers or
other characters, and
displays these characters
as text. Handwriting
recognition is only active
in places where text can
be input.
Jane
First name
Last name
Job title
Jones
Type
Appointment
Graphic Desig
Description
Done
Tap
> Setup to change
Phone (w)
Phone (h)
Mobile (w)
Ring tone
Email (w)
Fax (w)
Weekly meeting
language for the keyboard.
At the bottom left of the
keyboard you can choose
between three keyboard
layouts with different
character sets.
1
q
2
w
a
3
e
s
4
r
5
t
6
y
g
7
u
h
8
i
9
o
0
p
The text mode screen is
split into an upper and a
lower part, by an arrow
in the middle of the right
edge. Write lowercase
letters below the arrow
and uppercase letters in
line with it. Write
Default n...
cap
d
f
j
k
l
z
x
c
v
b
n
m
.
abc aeo 123
,
? @
Web
abc - standard characters
àëó - international characters
numbers above the arrow.
123 - numeric characters and currencies
Mark text by putting the stylus on the text, wait a moment, and
drag the stylus over the text.
The current input field is shown to the left in the top bar of the
keyboard. Tap the arrows or rotate the Jog Dial to change the
input field. The keyboard top bar also contains a drop-down
Note Most letters can be written using different stroke styles.
See the tables below. The style does not determine case. The
position on the screen decides case.
menu with Cut
,
Copy and Paste. When copying or cutting, the text
must be selected first.
34
Getting to know your P910i
This is the Internet version of the user’s guide. © Print only for private use.
Letters
Accented letters
Lowercase letters are written below the arrow and uppercase
letters in line with the arrow.
Write the character as described above, then write the accent
above the arrow. Other such characters, for example, ö and ü,
follow the same principle.
.
a
b
c
d
e
f
n
o
p
q
r
,
?
!
Note Start each stroke at the dotted end.
1
2
Numbers
Numbers are written above the arrow.
&
2
1
@
=
.
0
1
s
t
8
9
+
1
g
or
*
'
2
h
i
u
v
w
x
y
z
"
,
2
3
4
5
6
2
1
*
/
2
1
2
1
j
1
2
1
2
k
l
m
\
(
)
7
Note Start each stroke at the dotted end.
Note Start each stroke at the dotted end.
Getting to know your P910i
35
This is the Internet version of the user’s guide. © Print only for private use.
Extended characters
Press the space key to enter a character space to the right of the
cursor. Press and hold the space key to move the cursor forward
by inserting 6 space characters at a time.
To write symbols and characters that are not shown in these
tables, please consult the Extended characters section of the
Handwriting recognition help topic in your phone.
Note When typing, press the keys one after another. Not, for
CAPS
example,
and simultaneously.
E
Flip keyboard
Using the CAPS key
Located on the inside of the flip,
the keyboard is similar in design
to that of a standard computer
keyboard.
CAPS
The
key is used to capitalize or 'caps-lock' characters on
the keyboard.
CAPS
•
Press
once followed by, for example, 'E' to write a
capital letter. Any additional keys pressed will be displayed
in lowercase.
With the flip open you use the
keyboard keys to enter text, for
example, when writing a text
message. When you press a key,
CAPS
•
Press
twice for caps-lock. Any additional keys pressed
CAPS
will be displayed in uppercase until
remove caps-lock.
is pressed again to
if there are additional characters
associated with that key, then these will be shown in a pre-edit
Using the 123 key
The key is used to access the coloured characters and
numbers on the keyboard keys.
box in the title area:
e 'e ee é è e ê
If the same key is pressed again, the next character in the pre-
edit box will be selected. You can also use the Jog Dial to run
through and select characters in the pre-edit box. (The pre-edit
box will be displayed on screen for as long as you have the key
depressed.) When the key is released, the highlighted character
will be selected after approximately 1 second.
•
Press
once followed by, for example,
E
to type the
number
3. Any additional keys pressed will display the
standard characters on the keys.
•
Press
twice to lock the coloured characters and
numbers. Any additional keys pressed will type the coloured
Press
to delete the character or spaces to the left of the
characters or numbers until
is pressed again.
cursor. Press and hold
whole words.
to delete several characters and then
36
Getting to know your P910i
This is the Internet version of the user’s guide. © Print only for private use.
Inserting symbols
SIM card lock
There are a number of ways to insert symbols with the P910i
The SIM card lock protects your SIM card, not the P910i,
keyboard.
against unauthorized use. It is unlocked by the PIN and PUK
codes which you receive from your service provider.
•
Press the
or
keys to show additional symbols in the
pre-edit box in the title area.
You can choose to have to unlock the SIM card every time you
turn the P910i on, or to have the SIM card unlocked.
•
•
Use the
to access the coloured symbols on the keys.
Holding down the
key for a short time will generate the
Your PIN (Personal Identification Number) code consists of four
to eight digits. If you activate the SIM card lock, the P910i will
ask for the PIN code every time you turn it on. You unlock the
SIM card by entering the PIN code.
symbol selector table. To select a symbol use the Jog Dial by
first scrolling through the rows, and select the row by
pressing the Jog Dial inwards. Then use the Jog Dial to scroll
within the row, and selecting the symbol by pressing the Jog
Dial inwards.
To activate the SIM card lock
See “Flip settings” on page 167 how to specify which keyboard
your P910i has.
1. Select
2. Select a lock option.
3. Select Done
Control panel > Device > Locks.
.
An error message informs you if a wrong PIN code has been
entered. Usually, the SIM card will be blocked after three wrong
attempts (the number of attempts is SIM-card dependent), and
you need to enter the PUK code to unblock it.
P910i locks
Use the SIM card lock and the device lock to protect your SIM
card and your P910i from unauthorized use. Use the keylock to
prevent the keys from being accidentally pressed.
The PUK code consists of eight digits. When you have entered
the right PUK code you must enter a new PIN code. You have
ten attempts to enter the PUK code. If all ten attempts fail, the
Note You can usually make an emergency call without
unlocking the P910i.
Getting to know your P910i
37
This is the Internet version of the user’s guide. © Print only for private use.
SIM card will be disabled and you need to contact your network
operator.
The default device lock code is 0000.
To activate the device lock
You cannot change the PUK code.
1. Select
2. Select a lock option.
3. Select Done
Control panel > Device > Locks.
PIN2
Some functions on the SIM card can be protected by a
secondary code feature. Some SIM cards do not have a PIN2
lock.
.
You can choose to have the P910i locked every time you turn it
on, locked when the SIM card has been changed, or unlocked.
The PIN2 lock cannot be deactivated. The code can be changed
by a user who knows the old code.
It is also possible to use the device lock in combination with the
screen saver. Just mark the checkbox
Control panel > Device >
Display > Screen > Screen saver device lock to have the device lock
activated when the screen saver goes on.
Device lock
The device lock protects your P910i and the data in it against
unauthorized use.
Note When using the screen saving device lock, make sure you
have set the device lock to activate at Power on. Otherwise your
P910i will be unprotected after Power on, until the screen saver
goes on.
If the device lock is set to When SIM changed, it means that the
P910i is not normally locked. However, if the SIM has been
changed, the P910i asks you to enter the code to unlock the
P910i before you can use it. This means that if someone steals
your P910i and puts another SIM card into it, they will not be
able to use it.
Note You will not be able to browse the contents of your P910i
from a PC, or synchronize items using the SyncStation, when the
P910i device lock is enabled and active.
Note Your operator can block your SIM, if you report that your
phone has been stolen.
The device lock is not on when you buy your P910i. You can
change the device lock code to any four to eight digit personal
code.
38
Getting to know your P910i
This is the Internet version of the user’s guide. © Print only for private use.
with the flip removed. When this setting is active, the screen
will automatically become locked after a period of inactivity.
Change code
To change a code
To activate or change the screen lock
1. Select
Control panel > Device > Locks.
1. Select
> Settings > Screen > Automatic input lock.
2. Select Change Codes.
2. Select a lock time or Off
.
3. Select the code you want to change.
4. First enter the old code, then the new one. (To ensure that
you have typed the new code correctly you have to enter it
twice.)
To lock the screen
Select
> Lock screen.
To unlock the screen
Push the Jog Dial Forwards > Inwards or Backwards > Inwards
.
Automatic keylock
This option locks the keys on your P910i when the flip is closed.
This is to protect the device if the keys are accidentally pressed.
When this setting is active, the keypad will become
automatically locked after a period of inactivity.
To activate or change the keylock
Select
Control panel > Device > Locks.
To unlock the keys
Select
>
.
Screen lock
This option locks the screen of your P910i. This is to protect the
device if the screen is accidentally pressed in flip open mode or
Getting to know your P910i
39
This is the Internet version of the user’s guide. © Print only for private use.
Phone
The Phone application is easy for the beginner, yet powerful for
the advanced user. It can be used together with the other
functions of the P910i, including applications from developers
outside Sony Ericsson.
•
Flight mode which enables the P910i to be used as a PDA in
situations where radio transmitters may not be used. The
GSM and Bluetooth transmitters (and receivers) are switched
off.
The phone includes useful features such as:
With the flip closed you can access most of the functions using
the Jog Dial and the keypad. More advanced tasks such as
handling a conference calls or using other applications during a
call are best handled with the flip open.
•
•
•
Personalized ring types.
Picture phone book.
Quick access back to the entries in Contacts, making it easy
to try an alternative number or send a message if the contact
is unavailable or busy.
Some options may be hidden or not available depending on your
subscription.
•
•
Voice-dialling – make a call by saying the contact’s name.
Voice answer – an incoming call may be answered or sent a
busy signal, using the words recorded for ‘answer’ and
‘busy’.
Call handling with the flip
closed
With the flip closed, you can use either the keypad or the Jog
Dial to handle calls.
•
Incoming call acceptance limit – specify those who should be
able to reach you.
•
•
Access to other applications while talking on the phone.
Outgoing calls
Office handsfree (speakerphone) which starts when you open
the flip, making it easy to access applications such as
Calendar and Jotter while talking.
To make a call
Enter the phone number on the keypad and press the Jog Dial or
press
.
40
Phone
This is the Internet version of the user’s guide. © Print only for private use.
•
Press
delete all characters
Press and hold
Press and select Hide my number when you have
entered the phone number, if you do not want to show your
phone number to the party you are calling. Select Show my
number, if you want to show it.
to delete a typed character. Press and hold
to
To make a call using Contacts
.
1. Select
on the standby screen.
•
•
to insert the international call prefix
+.
2. Press the Jog Dial or
.
3. Scroll the list by rotating the Jog Dial and select a contact.
4. Scroll by rotating the Jog Dial and select the desired number.
5. Press the Jog Dial or
.
For more information, see ‘Contacts’ on page 101.
If the called party is busy, a dialog box appears from which you
can set your P910i to automatically retry to connect.
To make a call using voice control
To make a call using Speed dial
Speed dial is a fast way to call one of your special numbers. See
‘Set up speed dial numbers’ on page 48.
1. There are various ways to make a call using voice control.
– Press and hold the Jog Dial.
– Press and hold
.
1. Press the key corresponding to the number of the speed dial
contact.
– Say the ‘Magic word’.
– Press the call button on the headset.
The speed dial name is shown above the
key. If a
When the Magic word function is active, the
appears in the status bar.
icon
picture is attached to the speed dial, the picture is also shown.
2. Press
.
2. When you hear a short tone, say the voice command linked to
the number you want to call. The P910i will connect you
with the matching contact.
To make a call using the Call list
1. Select
2. Press the Jog Dial or
3. Scroll the list by rotating the Jog Dial and select an entry.
4. Press the Jog Dial or
on the standby screen.
.
You can use voice control when the P910i is handheld, used
with a handsfree set (car or portable), or with a Bluetooth
.
Phone
41
This is the Internet version of the user’s guide. © Print only for private use.
wireless technology headset. Magic word cannot be used
together with a Bluetooth wireless technology headset.
•
Press and hold any of the keys from
your Contact list. Press again to reach the next letter.
Additional key presses will add letters to your search.
to
to open
Read more about this in ‘Voice control’ on page 53.
•
•
Press any digit followed by
in the SIM phone book.
to reach a phone number
To make an emergency call
Enter the emergency number on the keypad and press
the Jog Dial.
or
Press
for the last dialled number.
Incoming calls
Usually, but not always, no SIM card or PIN code is required for
emergency calls and you will be able to make the call as long as
you have coverage from a GSM network. Check with your local
provider to find out if emergency calls are possible without a
SIM card, and which emergency call numbers are supported.
When you receive a call, the name of the caller will be displayed
received from the network. If there is an associated picture it
will also be shown in a small or large version. See ‘Incoming
call picture’ on page 53.
To end a call
Press
, or press the Jog Dial.
You can select whether an ongoing program will remain active
when you get an incoming call or if the Phone program shall
interrupt it. For settings see “Incoming call behaviour” on page
57.
Shortcuts
•
Press and hold
to dial your voicemail. With the flip
open, select Phone > Call voice mail
.
To handle an incoming call
See ‘Voicemail’ on page 56 on how to set up voicemail.
You can press
to answer the call or answer by voice
control, see ‘Voice control’ on page 53.
•
•
Press any of the keys from to followed by
to call a speed dial number.
twice to call the last dialled number.
You can press
ring signal.
to reject a call and press
to silence the
Press
An incoming call will bring up the following options:
1 Answer – Answer the call.
•
42
Phone
This is the Internet version of the user’s guide. © Print only for private use.
•
•
2 Send Busy – Reject the call. The calling party will hear a
busy tone and the call will be logged as a rejected call.
•
Transfer sound – Transfer the call to a Bluetooth wireless
technology headset.
3 Mute – Silence the ring signal. The calling party will not
notice that you have silenced the call. The call will be logged
as a missed call.
•
Turn On/Off tones – You can send DTMF tones with the
keypad, ‘Controlling tone-based services’ on page 49.
•
•
•
Microphone mute On/Off – Turn the microphone on or off.
If a large picture of the caller fills the screen, you can press
or use the Jog Dial to access the menu with the options
above.
Copy number – Copy a phone number to the clipboard.
Paste number – Paste a copied number to be used for the next
call.
•
•
Speakerphone On/Off – You can use the P910i as a
speakerphone. See ‘Speakerphone’ on page 48.
Options during or directly after a call
Use the Jog Dial to change the phone volume during a call.
Applications – Open another application, and, for example,
paste a copied phone number into a Jotter entry.
Press
to get a list of call handling options. The list will
vary depending on the situation. Options that concern two or
more active calls are described in ‘Handling two or more calls’
on page 45.
Press and hold
Shortly press
to mute the microphone during a call.
again to reactivate the microphone.
•
•
End call – End the active call.
Call handling with the flip open
New call/Hold call/Retrieve call – Put the active call on hold /
retrieve the held call. This is useful if you want to make a
new call during a call.
You use the stylus and the virtual keypad to handle calls with the
flip open.
•
•
Add to contacts – Create a new Contacts entry if the phone
number of the active call is known, and not already stored in
Contacts.
Outgoing calls
To make a call
Show contact – Display the entry in Contacts, if any, that
corresponds to the phone number of the active call.
1. Select
opened.
in the application picker. The Speed dial view is
Phone
43
This is the Internet version of the user’s guide. © Print only for private use.
2. Tap
on the button bar.
To make a call using the Call list
1. Select from the button bar.
3. Enter the numbers with the virtual keypad and tap
keypad, or press the Jog Dial inwards.
on the
2. Select an entry by rotating the Jog Dial and pressing it
inwards. You can also tap the entry using the stylus.
To delete a typed character - tap
. If you do not want to
show your phone number to the party you are calling, select
Phone > Hide my number after you have entered the digits.
Select Show my number, if you want to show it.
3. Select
.
To make a call using the Contact list
1. Select in the application picker.
If a call is not successfully connected, the P910i can be set to
automatically retry to connect the call. When a retry is
successful, the P910i alerts you with a single ring signal.
2. Select an entry by rotating the Jog Dial and pressing it
inwards.
3. Select a phone number by rotating the Jog Dial.
To make a call using Speed
dial
P
h
o
ne
E
it
d
Speed dial is a fast way to call
one of your special numbers.
See ‘Set up speed dial
numbers’ on page 48. This is
the default phone view.
You can also tap the contact and/or number using the stylus.
Sony Ericsson
1
2
3
To make a call using voice control
You use the voice control in the same way as with the flip
closed. See“To make a call using voice control” on page 41.
John
4
Sandra
5
Susan(w)
6
1. Select
bar.
on the button
To end a call
Select End call, or press the Jog Dial.
Mike
7
Julia(h)
8
Robert
9
2. Use the Jog Dial or tap with
the stylus to select an entry.
Incoming calls
Elizabeth
Empty
Empty
When you receive a call, if the calling party is found in
Contacts, the name of the caller will be displayed. If there is a
44
Phone
This is the Internet version of the user’s guide. © Print only for private use.
picture, it will also be shown in a small or large version. See
‘Incoming call picture’ on page 53.
•
Add to contacts – Create a new Contacts entry. This option
appears automatically after a call if the phone number of the
call is known, and not already stored in Contacts. See ‘Add to
contacts’ on page 54.
To handle an incoming call
Use the screen buttons to select what to do.
•
Show contact – Display the entry in Contacts, if any, that
corresponds to the phone number of the active call.
•
•
Answer – Answer the call.
•
•
Copy number – Copy a phone number to the clipboard.
Send Busy – Reject the call. The calling party will hear a busy
tone and the call will be logged as a rejected call.
•
notice that you have silenced the call. The call will be logged
as a missed call.
Tap
to make the following adjustments:
•
Call volume – Adjust the volume in the phone. This is easier to
do with the Jog Dial.
You can also answer by voice control, see ‘Voice control’ on
page 53.
•
•
Vibrating alert – Set when the vibrating alert should be active.
Silent mode – All sounds, for example ring signals, will be
turned off.
Options during or after a call
•
•
Speakerphone – Activate the P910i as a speakerphone.
There are several options available, depending on the situation.
You can access some of them using the screen buttons, by
tapping the field with the calling party details, or on the menus.
Mute microphone – Turn the microphone on or off.
Options that concern two or more active calls are described in
‘Handling two or more calls’ on page 45.
Handling two or more calls
During a call, you can make a second call, or answer an
incoming call. The ongoing call is put on hold and the new call
becomes active. The held call is shown with a grey background.
•
•
End call – End the active call.
New call/Hold call/Retrieve call – Put the active call on hold/
retrieve the held call.
If someone calls when a call is on hold, you will be asked if you
want to release the held call and answer the incoming call.
Phone
45
This is the Internet version of the user’s guide. © Print only for private use.
When an active call is finished, you are asked to retrieve the
held call. If you do not respond within a few seconds, the held
call will also be finished.
With the flip open, choose options by tapping the screen
buttons, by tapping the field with the other party’s details, or
selecting from the menus.
To make and handle a new call during a call
Conference calls
A conference call can be started Phone Edit
when you have an active call
and a held call.
Press
to get a list of call
handling options with the flip
closed.
P
h
o
ne
E
it
d
11:03
11:03
1
2
3
John Smith
(w)
John Smith
–
–
–
End active call – End the
active call, the held call
becomes active.
Tom Clark (w)
Ann Jones (h)
0123456789012(h)
The conference call view is
automatically displayed
whenever a party has been
added to the conference.
Switch calls – Switch
between the active and
held call.
Anne Jones (w)
End conference
New call
If an incoming call is answered
during a conference call, the
conference call will be put on
hold.
End active call
Switch calls
Start conference call / Add to
conference call – Join the
two calls for a conference
call.
Hide parties
Start conference call
Note Conference calls are only
available if they are supported
by your subscription.
–
Transfer calls – Connect
the held call to the active
call and disconnect yourself from the call.
–
–
Release all – End both calls.
To start a conference call
With one active call and one held call, tap the Start conference call
button, or select Phone > Start conference call from the menu.
Show contact – Display the entry in Contacts, if any, that
corresponds to the phone number of the active call.
46
Phone
This is the Internet version of the user’s guide. © Print only for private use.
To add a new conference party
To view the Call list with the flip closed:
1. Press
1. During a conference call, tap New call and make a new call.
.
2. Select Add to conference
.
2. Select Call list.
or
To manage a conference call
Use the screen buttons:
1. Select
2. Press
on the standby screen to open the Call list.
and select which calls in the list you want to
•
•
End conference – End the conference for all parties.
display. The currently selected view is not shown as an
option.
Show / Hide parties – Switch between the standard call control
view and conference call view.
Tip With the flip closed you can press
call list. Press twice to call the last number used in the P910i.
once to view the
To speak privately to a specific conference party
Tap a party in the list to get the following options:
To view the Call log with the flip open:
•
Extract party – Make the selected party the active call, the rest
of the parties will be put on hold.
1. In the Phone application, select
from the button bar.
•
Release party – End the conference call for the selected party.
2. Select a listed call to see more detailed information about it.
To delete calls from the Call list
Call list and call log
•
•
To delete all calls, select Phone > Delete all calls.
The Call list available with the flip closed shows calls made,
To delete old calls, select Phone > Delete entries older than >
Enter a date > Delete
received, rejected, or missed. with the last dialled call at top.
•
To delete one call, open the detailed view on the call > Phone
> Delete this entry.
The Call log available with the flip opened keeps track of date,
time, length, and cost information (if available) for each call. It
shows all calls in order with the most recent call at the top.
Phone
47
This is the Internet version of the user’s guide. © Print only for private use.
Set up speed dial numbers
Speed dial is a fast way to call one of nine selected phone
numbers. The view contains nine speed dial positions. Each
Hints and smart functions
Speakerphone
speed dial entry consists of a picture or an icon, and a name or a
If you open the flip during a call, the speakerphone function is
activated and the volume will increase. This lets you continue
the conversation while using other functions of the P910i.
number. The names, numbers and pictures shown in the Speed
dial view are derived from the Contacts application, see
‘Contacts’ on page 101. If the contact has a picture stored then
this picture is used. A default icon is used if the contact does not
have a stored picture.
Close the flip or tap
to switch off the speakerphone.
Note The speakerphone does not work while the phone is in
silent mode.
To set a Speed dial number
1. Select
from the button bar.
Warning! The volume may be uncomfortably loud at the
higher volume levels if the phone is close to your ear. Exposure
to excessive volume may damage hearing.
2. Select an empty position.
3. Select the desired contact.
4. Edit the name tag if desired.
Silent mode
5. Select Done
.
In silent mode all audible ring and alarm signals are turned off.
To edit or delete a Speed dial number
1. Select on the button bar.
When the flip is closed, press
and select Turn on silent to
put the phone in silent mode. Press
and select Turn off
silent to turn off silent mode. When the flip is open, tap the
sounds icon in the status bar to open a dialog where you can
switch silent mode on or off.
2. Select Edit > Edit speed dial
.
3. Select the contact to edit or delete.
4. To change the name, enter the new name.
The vibrating alert still works in silent mode if not deactivated.
To delete a contact, tap Delete.
5. Select Done
.
48
Phone
This is the Internet version of the user’s guide. © Print only for private use.
2. On the Power menu, select the option you want.
Flight mode
3. Press the Jog Dial,
, or tap Done.
Note The phone and other communication functions must never
be used in an aircraft unless otherwise instructed by the aircraft
personnel. If the use of equipment without a radio transmitter is
permitted, you can turn on the flight mode on the product. Doing
so turns off the radio function.
To set flight mode on or off
1. Select Control panel > Device > Flight mode.
2. Select Flight mode now / Phone on now
3. Tap Done
.
.
In flight mode the radio function is turned off so that it does not
disturb sensitive equipment, for instance in an aeroplane or in a
hospital. You cannot make and receive calls, but most of the
other functions in the P910i are available.
Controlling tone-based services
You can use your P910i to control phone banking services or
other tone-based services that use DTMF (Dual Tone Multi
Frequency).
A Power menu asks you if you want to start the P910i in normal
mode or flight mode each time you turn on the P910i. See
‘Flight mode’ on page 149 on how to activate and deactivate
this Power menu.
The P910i provides different ways of sending tones during a
call:
Note You must set the Power menu before the flight.
•
•
Pressing keypad keys during an active call.
Including a tone sequence in the call setup. Enter the phone
To use the Power menu
The Power menu has the following options:
number, then press and hold
represented by the character
to insert a pause,
. Continue to enter your
p
•
•
•
Phone on – Start the P910i in the normal way.
Flight mode – Start the P910i in flight mode.
Power off – Turn the P910i off.
numbers for the tone-based code. Finally make the call by
pressing
.
Hyperlinks in Messaging and Jotter
When you write text in Messaging and Jotter, your P910i
interprets a number as a phone number. If you select that
To set flight mode on and off when Power menu is selected
1. Press the On/Off button.
Phone
49
This is the Internet version of the user’s guide. © Print only for private use.
number, you have the possibility to, for example, call the
number or send an SMS to it.
Note You should not store any personal codes in your P910i, in
case your phone is stolen or lost.
Your P910i also recognises email addresses and URLs. If you
select an email address you have almost the same possibilities as
for the phone number. If you select an URL, your have the
possibility to start the Internet browser which opens the
corresponding Internet page.
Support for TTY
Teletype (TTY) accessory, text phone, is an aid for people with
speech impairments.
To use the TTY device together with the P910i
•
Write digit sequences into
a Contact entry for the
service. Each digit
1. Connect the TTY device to the accessories connector at the
base of the P910i.
C
o
tactsEdit
n
Unfiled
Bank
2. In Phone, go to Edit > Preferences > TTY Accessory and select
sequence to be sent as
+4613244500 p1#1234567890
p10#0#34#56789 balance (w)
p30#1234#56 account 1 (w)
p10#1#5678901 account 2 (w)
p20#123456789 (w)
the check box to set the P910i into TTY mode.
tones must begin with
space will end the tone
p. A
Refer to the TTY device user manual to find out how to use the
device. It may be necessary to use an adapter between the TTY
device and the P910i.
sequence and you can add
a comment after the space.
Once your call to the
service has been
established and you want
to send one of your pre-
programmed digit
sequences, choose Show
contact on the Phone menu
to get back to the Contact
card with the tone
You can still make normal calls with the P910i in TTY mode but
other accessories such as handsfree will not work properly.
Do not open the flip during a TTY call. It will impair the quality
of the connection.
Note Support for voice carry over (VCO) and hearing carry
over (HCO) is handled through the TTY device and not through
the phone.
sequences.
50
Phone
This is the Internet version of the user’s guide. © Print only for private use.
Support for ALS
Corporate phone
services in P910i
Alternate line service (ALS) allows you to have two lines, and
two phone numbers, in one subscription. If you are not
subscribed to ALS, these dialogs and settings are hidden.
PhoneEdit
02:00
?
The P910i can be used in a
corporate environment like
centrex, mobile centrex and
corporate switchboards (PABX)
equipped with a mobile
extension facility (like Ericsson
MD110 or Ericsson
Corporate call
John Smith
Using ALS, you can select which line to use for outgoing calls.
You can use the first line for any function, while the second line
can be used for speech only.
+442745551409 (w)
End call
New call
Call back
Intrude
Incoming calls can be received at both lines at any time. The
name of the line is shown and the ring signal defined for the line
is used.
BusinessPhone).
Programmable feature
buttons
To select a line for outgoing calls
More
The preset line is shown by the icon in the status bar. If you want
to use the other line:
Used in a corporate
environment, the P910i provides
programmable feature buttons
for easier use of corporate phone services. When, for example,
you call someone who does not answer, you can press the button
Call Back to have the corporate system call you back as soon as
he is free.
•
With the flip closed, press
Switch to line 2 depending on the previously preset line.
With the flip open, tap and select Switch to line 1 or Switch
to line 2 depending on the previously preset line.
and select Switch to line 1 or
•
2
Phone
51
This is the Internet version of the user’s guide. © Print only for private use.
To report that you are busy, click
(in standby mode) the PBX icon
> Command to send a
command to the PBX, such as In
meeting until..., Course, or
Business trip. The switchboard
operator can then answer
incoming callers that you are
busy and when you will be back.
All those commands that you
used to dial to the corporate
switch can now be replaced by a
command button with clear text.
When storing numbers in Contacts you should use the
international number format, starting with . This allows you to
use Contacts when you are outside the corporate telephony
environment, when you are abroad, and when you are sending
SMS or MMS messages.
+
P
h
o
ne dit
E
Commands
Select command
Meeting
Incoming calls via the PBX may be routed to the P910i as well
as to your desk phone, and you can answer in either telephone.
When talking on the P910i, you may hand over the call to the
desk phone by calling that phone, answering it and hanging up
the P910i. You can also hand over a call from the desk phone to
your P910i.
Business trip
Sick leave
Corporate voicemail
Lunch
Gone for the day
Vacation
Course
Configuring corporate phone service
Cancel
Your corporate phone administrator can program feature
buttons, call routing, and commands in your phone via a
settings file. Contact him to receive a user guide valid for the
company and the configuration file, either via email or down
load from the intranet.
Using corporate phone
service
To place an internal call, dial an internal (short) number or an
external (long) number. The phone sets up the call through the
corporate switch, so that during the call you can utilize all
corporate features like call back, interrogation, conference and
switchboard operator services. When dialling an external
number, you do not need to dial the external line prefix; it is
added automatically.
See “Corporate phone services” on page 57 on how to install
corporate phone service.
For more information on corporate telephony go to
www.SonyEricsson.com/professionalsolutions
Note When travelling abroad, use your phone as a normal GSM
phone, entering Phone > Edit > Preferences> Calling Cards and set
the calling card to Call directly
.
52
Phone
This is the Internet version of the user’s guide. © Print only for private use.
magic word you can also press and hold the Jog Dial or press the
handsfree set call button.
Preferences
In this menu you can change the settings for the phone options.
Note Magic word is not supported with the Bluetooth headset/
car kit in the P910i. Instead of magic word, push the button on
the Bluetooth headset. After a confirmation tone, you should say
the name.
(Settings on your P910i that are system-wide and affect more
than one application are made from the Control panel, see
‘Control panel’ on page 147).
To set the phone preferences
•
•
Voice dialling – Select or unselect the checkbox.
1. In the Phone program select Edit > Preferences.
2. Select the item to set up.
Magic word – Select the cases where you want to use the
magic word when you use voice dialling. You must,
however, record a magic word before you can select to use it.
Using Magic word will increase battery drain.
Incoming call picture
•
•
Voice answer – Select or unselect the checkbox. Tap On if you
want to answer or reject incoming calls by voice commands.
You must first record voice commands for Answer and Busy.
If an incoming caller has a picture stored in Contacts it will be
shown on the screen. Select the checkbox to show a large
version of the picture over the whole screen.
Play caller name – If you have recorded a name for a person in
Contacts, the P910i will tell you the person’s name when he
or she calls you. This is useful when using your P910i
together with a handsfree.
Voice control
The voice control option lets you manage calls using your voice.
With Voice answer you can use words recorded for ‘answer’ and
‘busy’ to answer or send a busy signal to an incoming call. With
Voice dialling, you can make a call by saying the contact’s
name.
•
Voice commands – A list of the voice commands. A balloon
means that a voice command is recorded for the command.
To record a voice command
A magic word ensures that the P910i will not call somebody
whose name has just been mentioned by chance.
1. Select one of the options, Magic word Answer, or Busy and tap
,
Record
.
Say the ‘magic word’ and then the name of the person you want
to call, and the P910i will try to call the person. Instead of the
Phone
53
This is the Internet version of the user’s guide. © Print only for private use.
2. Say the magic word, the answer command or the busy
command after the tone.
•
Answering mode – Select the option you want.
–
–
Normal – Answer calls as normal.
If you are recording a magic word, make sure that you
choose a long unusual word, which can easily be
distinguished from ordinary background speech.
Any key – Press any key (except
) on the keypad to
answer.
–
After 5 seconds – P910i answers automatically after five
3. Select Play to check the quality of your recording.
seconds.
4. Select Done to exit.
You can also select to use a Bluetooth headset as the preferred
sound device. See ‘Pairing’ on page 136 for information on how
to establish connection with the headset.
You are advised to record voice commands in a quiet
environment to maximize recognition.You also have to select
the voice commands carefully, so it does not activate by mistake
from environment sounds.
•
Bluetooth: Preferred Handsfree – Select the option you want.
–
Phone – Use the keypad to manage incoming and outgoing
To record voice commands for individual contacts, see
calls.
‘Creating and editing contacts’ on page 104.
–
Headset – Use the headset or the keypad to manage
incoming and outgoing calls.
Add to contacts
Divert calls
You can divert incoming calls to another number if for any
reason you are unable to answer them.
This is a function for adding called and calling parties to
Contacts. After a call has ended, if the phone number is not
already stored in the Contacts, you are asked if you would like to
add it.
To divert calls
Set the function On or Off
.
1. Select the type of call you want to divert.
2. Specify the phone number you want to divert to.
Handsfree
Specify how to manage calls when the P910i is used with a
handsfree kit connected.
3. Select Done
.
54
Phone
This is the Internet version of the user’s guide. © Print only for private use.
The settings are stored in the network. Tap Refresh to receive the
current settings.
Call waiting
Use these settings to control how P910i handles incoming calls
during an ongoing call.
Tip Normally the data/fax options should not be changed.
•
•
On – You will be alerted by incoming calls.
Accept calls
You can specify who should be able to call you. All other callers
will be rejected. Your options are:
Off – The P910i sends a busy tone to the calling party.
Restrict calls
–
–
All callers – Everybody can phone you.
You can set restrictions for calls made from or to your P910i.
You can, for example, protect it from being used for long-
distance calls.
Listed callers only – Only people on the Accept callers list
can phone you.
–
–
–
Contacts – Only people in your Contacts address book can
phone you.
To restrict incoming calls
1. Select the Incoming tab.
2. Set restrictions for:
– All incoming calls.
Speed dial list – Only people in your Speed dial list can
phone you.
No one – No one can phone you. You can still receive
messages such as SMS, MMS and email.
– Incoming calls when roaming. Use this to avoid costs for
incoming calls when travelling abroad.
To add a contact to the Accepted list
To restrict outgoing calls
1. Select Add new.
1. Select the Outgoing tab.
2. Select Lookup and choose a contact, or write the name and
number of the contact.
2. Set restrictions for:
3. Select Done
.
– All outgoing calls.
– Outgoing international calls.
– Outgoing international calls except to your home country.
Tap a contact on the list to remove it.
Phone
55
This is the Internet version of the user’s guide. © Print only for private use.
•
Access tab:
Voicemail
–
–
Name – Enter a name for the calling card account.
For easy voicemail access, enter the number of your voicemail
box.
Access number – Enter the phone number of the calling
card server.
With the flip closed, press and hold
to call this number.
–
–
Verification code – Enter the verification code.
With the flip open, select Phone > Call voice mail
.
International prefix – Enter the international prefix used by
the server.
Note It is possible to include DTMF tones in the number. Insert
before the tones.
a
p
•
Set up tab:
–
Sending order
–
Number then code means that the P910i,
after you have connected to the server, first sends the
phone number you have entered, and then sends the
verification number. Code then number means the opposite
order.
Calling cards
Calling cards are used together with some phone services, which
means that calls are set up via a calling card server. These
settings specify how P910i handles calling cards. Most Calling
card settings are protected by the Device lock, see ‘Device lock’
on page 38.
Delay for number/code – Set a time delay between the
moment the calling card answers the call and the P910i
starts sending tones.
–
Calling card mode – Select how to use the selected calling
Some international calling card services instruct their users to
select a language by pressing a digit. When using the P910i
calling card feature, you can insert such a digit in one of these
places:
card.
–
–
Calling cards – A list of your calling cards.
Selected card – Select which of your calling cards you
want to use.
•
Immediately after the access number, but preceded by a
pause sign,
Please consult your calling card supplier for more details.
p
.
•
•
In the verification code.
To create a new calling card
Select New and enter the account information.
In the phone number that you dial.
56
Phone
This is the Internet version of the user’s guide. © Print only for private use.
Corporate phone services
GPRS Alert
You set up corporate phone services by importing a .pbx type
If you make a new telephone call you can interrupt an ongoing
settings file from your corporate IT-manager. This file can be
GPRS session, for example, an incoming email. Select the check
received via email, stored on the Memory Stick or downloaded
box to get a warning in such a case.
from Internet.
Note Make sure the file is authentic before you import it.
TTY Accessory
Select the check box when you want to use the P910i together
To set up corporate phone services
with a TTY accessory. Teletype (TTY) accessory, text phone, is
1. Place the file in the Document > Unfiled folder of the P910i or
an aid for deaf and speech-impaired people.
the Memory Stick.
2. Select Edit > Preferences > Calling cards and enter your device
AoC - Call meter settings
lock code.
Advice of Charge allows you to keep track of the cost of calls
3. Tap Import
.
and to stop the P910i from making chargeable calls when a
certain credit limit has been exceeded. The Advice of Charge
option only appears in the list if it is supported by your current
subscription.
4. Select the settings pbx file and tap Import
.
5. Select the card among the imported cards in the Selected card
control.
6. Activate the card by setting the Calling Card Mode to either
If the credit is limited, a Low credit warning is displayed, when
there is approximately thirty seconds of credit left. When the
credit runs out, Credit expired is displayed and ongoing,
chargeable calls are stopped.
Always use calling card or Prompt before call
.
Incoming call behaviour
When you answer a call when the flip is open the default
behaviour is for the P910i to switch to the phone program.
Select the check box if you prefer to stay in the ongoing
program when you answer a call with the flip open.
Please refer to the Help system for detailed information about
the Call meter settings.
Note PIN2 is required from your network operator for storing
any changes you make to the Call meter settings.
Phone
57
This is the Internet version of the user’s guide. © Print only for private use.
Not all networks provide charging information to the phone
during a call. If your network provides this service and your
subscription is for Advice of Charge Charging, you cannot make
or receive any chargeable calls if you are roaming in a network
that does not provide charging information.
ALS settings (subscription dependent)
Use Alternate Line Service to make calls on two lines with
separate phone numbers. Some of the phone settings are used on
a per line basis. In most cases, the settings displayed apply to the
selected line. This is then indicated in the dialog title bar. In
other cases, the lines correspond to separate settings or tabs in
the dialogs.
To set the line tags
1. Select the ALS settings dialog.
2. Edit the names for line 1 and 2.
3. Tap Done
.
58
Phone
This is the Internet version of the user’s guide. © Print only for private use.
MEDIA
CommuniCorder
With the built-in CommuniCorder camera you can record video
clips and take pictures, view them on your phone screen and
send them directly to friends or colleagues via multimedia
messaging. You can also send the video clips and pictures you
have saved in your P910i via messaging, infrared
communication or Bluetooth wireless technology to, for
example, a PC. It is also possible to exchange video clips and
pictures between the P910i and the Web.
Still camera
Still camera
Still camera
Indoor
Set for indoor light
Set for outdoor light
Outdoor
Message
picture
Set for picture size 160x120
pixels
Video camera Message
video
Set for video clips to be
appended to messages
The pictures in your P910i can be set as background, wallpaper,
or they can be added to the contacts in your phone book. See
‘Personalizing your P910i’ on page 144 to find out more about
using pictures.
Recording video clips
You can record a video clip with the flip open as well as closed.
To record a video clip
A button
on the camera activates the
1. Press the camera button
application.
to activate the CommuniCorder
CommuniCorder application and acts as the
shutter release when taking pictures.
2. Rotate, if required, the Jog Dial to the Video mode or
Message video if the video clip is to be sent in an MMS.
The Jog Dial is used to set the
CommuniCorder working mode:
3. Press again to start recording. The status indicator flashes red
during the recording.
Video camera Video
Automatic setting
4. Press the Jog Dial to stop recording. The video clip is
Still camera
Still camera
Auto
Automatic setting
automatically saved in Video
.
Night
Set for dark environment
CommuniCorder
59
This is the Internet version of the user’s guide. © Print only for private use.
You can also press the Jog Dial, or, when the flip is open, tap the
To delete a video clip you have just recorded in flip closed,
capture button
video clip.
at the bottom of the screen to record a
select Delete clip from the flip closed context menu.
To manage video clips, tap
to go directly to Video. See
By default the video clips you record are stored internally in the
Unfiled folder. Tap the folder menu to the right in the menu bar to
change the storage location to another location, for example, on
a Memory Stick. See ‘Folders’ on page 28 for more information
on using folders.
‘Video’ on page 68 for more information.
Delay timer
CommuniCorder has a delay timer with a delay of 1-25 seconds.
The delay time is the time between the moment you activate the
shutter release and the moment when the recording starts.
To send a video clip you have just recorded in flip closed, select
Send as MMS from the flip closed context menu. In flip open, tap
To set the delay time
.
1. Tap CommuniCorder > Preferences.
Note Most operators only accept video clips of 10 seconds
length or 95 KB size.Use the Message video mode, or the Video
limit setting in Video mode to limit the file size.
2. Tap
and set the desired delay time
To record video with delay timer
Open the flip to access the full range of CommuniCorder
settings. With the flip open, the CommuniCorder is activated by
1. Tap CommuniCorder > Delay timer.
2. Press the camera button. The timer beeps for the set time and
a timer icon is shown before the recording is started.
selecting
>
.
To delete the last video clip
When the delay timer is set, you will see the timer status icon
.
1. Select CommuniCorder > Delete clip
.
2. Confirm the delete operation.
3. Tap CommuniCorder > Delay timer to deactivate the timer.
60
CommuniCorder
This is the Internet version of the user’s guide. © Print only for private use.
a Memory Stick. See ‘Folders’ on page 28 for more information
on using folders.
Video status
Above the viewfinder, you will find the video status. Icons show
whether the CommuniCorder is ready or busy, video quality, and
audio quality. A number indicates how much time you have left.
The calculation is based on the current settings plus available
space on the storage location you have selected (internal or the
Memory Stick).
To send a picture you have just taken in flip closed, select Send
as MMS from the flip closed context menu. In flip open, tap
.
Open the flip to access the full range of CommuniCorder
settings. With the flip open, you activate the CommuniCorder
by selecting
>
or pressing the camera button
.
Taking pictures
To view the last picture
You can take a picture with the flip open as well as closed.
1. Select CommuniCorder > View picture
.
2. Select Done to return.
To take a picture
1. Press the camera button
application.
to activate the CommuniCorder
To delete the last picture
1. Select CommuniCorder > Delete picture
.
2. Rotate, if required, the Jog Dial to the desired mode.
2. Select Delete to delete the picture.
3. Press again to capture the image on the screen. The picture is
To delete a picture you have just taken in flip closed, select
Delete picture from the flip closed context menu.
automatically saved in Pictures
.
You can also press the Jog Dial, the
flip is open, tap the capture button
screen to take a picture.
button, or when the
at the bottom of the
To manage or edit the picture, tap
See also ‘Pictures and Image editor’ on page 64.
to go directly to Pictures
.
By default the pictures you take are stored internally in the
Unfiled folder. Tap the folder menu to the right in the menu bar to
change the storage location to another location, for example, on
CommuniCorder
61
This is the Internet version of the user’s guide. © Print only for private use.
status, picture size and picture quality. A number indicates how
many pictures you have left. The calculation is based on the
current settings plus available space on the storage location you
have selected (internal or the Memory Stick).
Delay timer
CommuniCorder has a delay timer with a delay of 1-25 seconds.
The delay time is the time between the moment you activate the
shutter release and the moment when the picture is taken.
To set the delay time and the picture freeze time
1. Tap CommuniCorder > Preferences.
2. Tap
and set the desired delay time.
In this dialog box you can also set the picture freeze time. This
specifies the time the picture stays unchanged in the screen after
you have taken it.
To take a picture with delay timer
1. Select
>
.
2. Tap CommuniCorder > Delay timer.
3. Press the camera button. The timer beeps for the set time and
a timer icon is shown before the picture is taken.
When the delay timer is set, you will see the timer status icon
.
4. Tap CommuniCorder > Delay timer to deactivate the timer.
Image status
Above the viewfinder, you will find the image status. Icons
show whether the CommuniCorder is ready or busy, delay timer
62
CommuniCorder
This is the Internet version of the user’s guide. © Print only for private use.
The icons in the upper right corner of the main view reflect the
Camera settings
quality and size settings of the pictures and video clips and also
You may want to change some of these settings if, for example
the sound quality of video clips.
you are taking a picture in daylight or in dark surroundings. You
can also choose what resolution, size and quality, you want for
the pictures you take.
To restore default CommuniCorder preferences
1. Tap CommuniCorder > Preferences
2. Tap Default
3. Tap Yes
.
Note Depending on which mode you are using, some settings
may be fixed (and not user adjustable).
.
.
To change preferences for the camera
1. Tap CommuniCorder > Preferences
.
2. Select the setting you want to change:
Move the slider to change the brightness of the picture.
Move the slider to change the contrast.
Turn the backlight On when the light behind the subject is
brighter than the light in front of the subject.
Turn the flicker free function On to reduce the effects of
flicker from, for example, fluorescent light.
Choose white balance according to the lighting conditions
you are in when taking the picture.
For pictures, choose quality and size. The picture sizes,
640x480, 320x240 and 160x120, are displayed in pixels.
For video, choose quality for video and audio.
Larger size and higher quality use more memory.
Choose delay time and freeze time for the still camera, and
delay time and Video limit for video.
CommuniCorder
63
This is the Internet version of the user’s guide. © Print only for private use.
Pictures and Image editor
In Pictures you can manage all pictures saved in your P910i.
The pictures can be taken using the CommuniCorder or received
via Messages, Bluetooth wireless technology or infrared
communication. They can also be downloaded via the browser
or transferred from your PC via a cable. Your P910i supports
JPEG, GIF, MBM, PNG, WBMP and BMP picture formats. In
the Image editor you can perform basic editing of JPEG
pictures.
The thumbnail view gives an overview of all the pictures in your
P910i while the list view shows a more compact list. At the
bottom of the screen you can see how many pictures you have
saved in the current folder.
Tip To take a new picture, tap
to go to the CommuniCorder
.
Move among the pictures with the arrow buttons or Jog Dial.
You can search for specific pictures and sort your pictures by
name, date, size or type. Tap Edit to choose how to sort the
pictures.
Pictures
P
i
c
t
uresEdit
All
You can send the pictures to
others, add them to the contacts
in your phone book, or use one as
a background image (wallpaper)
or screensaver.
Detail view
Tap a picture or select it with the Jog Dial to open it. Specify in
Edit > Preferences if pictures should open in detail view or full
screen view.
Brioney
Mer de gla...
In the detail view, you can rename your pictures and sort them
into folders. This makes it easier for you to keep track of your
pictures. Read more about organizing files in ‘Folders’ on
page 28.
Thumbnail and list
views
Tap
and
to change
Wakeboard
Mont Blanc
between the thumbnail view and
the list view.
12 pictures (890Kb)
64
Pictures and Image editor
This is the Internet version of the user’s guide. © Print only for private use.
To rename a picture
Zooming pictures, widescreen and full
screen
P
i
c
t
uresEdit
Photos
1. Select Pictures > Rename picture
.
From the detail view of the picture you can:
2. Enter a picture name > Done
.
•
•
Tap
and
to zoom in and out.
Note Two or more pictures
cannot have the same name.
Tap and drag the zoomed picture to view specific details in
the picture.
At the bottom of the screen you
can see the picture information,
for example, the size of the
picture and the date the picture
was taken.
•
Tap a picture to display it in widescreen. Tap it again to
display it in fullscreen. Tap and drag the picture to view
specific details. Tap once more to zoom in. Return to the
detail view by tapping, or pressing the Jog Dial backwards.
JPG-0002
10:15am,21/06/04
•
Rotate the Jog Dial to browse the pictures in widescreen
view.
Use
move between the pictures in the
current folder. takes you back
to the thumbnail or list view.
and
or the Jog Dial to
Moving, copying and deleting
From the detail view of the picture you can:
Sending and receiving pictures
•
Select a folder from the folders menu to move the picture to
that folder (internal or on a Memory Stick). See ‘Folders’ on
page 28 for more information.
Select Pictures > Send as to send pictures to other phones or to a
PC via multimedia messaging, IR or Bluetooth. See ‘Sending
and receiving items’ on page 30. You can also save pictures that
you have received via email and multimedia messages. See
‘Incoming multimedia messages’ on page 91 and ‘Receiving
attachments’ on page 96.
•
Select Pictures > Copy to to copy the picture to another folder
(internal or on a Memory Stick).
•
•
Select Pictures > Delete picture to delete it.
Select Pictures > Copy picture to copy the picture to a clipboard
Pictures in JPEG can also be imported/exported from/to a
memory card.
so that you can paste it into an item in another application.
Note Pictures with Forward lock cannot be sent further.
Pictures and Image editor
65
This is the Internet version of the user’s guide. © Print only for private use.
To copy, delete or move multiple pictures
Editing pictures
Editing is controlled from the toolbar below the picture. Tapping
the tool icons will bring up a palette with choices:
•
In the thumbnail and list views, select the check boxes beside
the picture names. Then select Pictures > the command you
want.
Zoom in
•
To copy and delete pictures you can also use the Storage
Manager found in the Control panel. For more information,
refer to ‘Folders’ on page 28.
Zoom out
Select colour Select one of the 16 colours
Select pen
Select one of the 4 pen sizes
Image editor
Select
Select one of the tools:
drawing tool - Pen for freehand drawing
- Undo last action
Using the Image editor, you
can edit JPEG images.
- Undo all actions
Image editor Edit
- Add text
- Crop picture
You can
•
•
crop and resize the pictures
- Resize picture
Select rotation Select rotation – clockwise or anti-clockwise
rotate them by 90° at a
time
You can save the edited image by selecting Image editor > Done
.
•
write and draw on them,
using different colours
Copy and paste by selecting Edit > Copy and Edit > Paste. You can
only copy and paste whole pictures.
To start the Image editor
From a picture opened in
Pictures, select Edit > Edit
If you make an error when editing the picture, you can undo the
last change by Edit > Undo. You can also undo all actions since
the picture was saved, by selecting Edit > Undo all
.
picture
.
66
Pictures and Image editor
This is the Internet version of the user’s guide. © Print only for private use.
To zoom in and out
•
You can return to the text editor by tapping on the text item.
This is not available in all formats.
Note As soon as you tap outside the text item, the text is merged
•
•
Tap
to zoom in.
with the picture and cannot be edited or moved.
Tap and drag the zoomed picture to view specific details in
the picture.
To crop a picture
1. Tap
and select the cropping tool
.
•
•
Tap
to zoom out.
A frame with 8 handles is placed around the picture.
Select Edit > Zoom, and select between Fit to screen and Full
2. Tap and drag one of the handles to define how the picture
should be cropped.
size
.
To draw on a picture
1. If desired, tap
2. If desired, tap
3. Tap anywhere, except on the handles, to crop the picture.
and select the desired colour.
To resize a picture
and select the desired pen size.
and select the pen tool .
1. Tap
and select the resizing tool
.
3. Tap
A frame with four handles is placed around the picture.
4. Draw with the stylus on the picture.
2. Tap and drag one of the handles to define the new size of the
picture.
To add text to a picture
When you lift the stylus, the picture will be resized.
1. Tap
and select the text tool
.
2. Tap the place where the text should be put on the picture.
3. Enter the text in the text field.
4. If required, change the text properties, using the choices on
the text, style and colours tabs.
5. Tap Done to place the text on the picture.
•
You can move the text on the picture by tapping and dragging
on the text.
Pictures and Image editor
67
This is the Internet version of the user’s guide. © Print only for private use.
Video
You can play video clips that are recorded with the
CommuniCorder, stored in your P910i or streamed. A video clip
Video clips
is a short video sequence. You can also play audio-only material
which is encapsulated within an MPEG file or streamed. You
can download video clips from an Internet site or transfer them
from a PC via a cable, or from a Memory Stick. You can also
exchange video clips with other phones or PCs via infrared
communication, Bluetooth wireless technology or multimedia
messaging.
Playing video clips
The Video player opens in the list view. In this view, you get an
overview of all the MPEG-4 video clips in your P910i. You can
search for specific video clips, zoom the video clip names and
sort them by name, date, or size. At the bottom of the screen you
can see how many video clips you have saved in your P910i.
You do not have to download a complete video clip to be able to
view it. You can use the streaming function and view the video
clip from the Web site where it is located. The video clip is
played with only a short time delay.
To view a video clip
1. Select
>
Video.
2. Select a video clip in the list.
The video player supports files in the MPEG-4 file format, for
example name.mp4.
Warning! The volume may be uncomfortably loud at the
higher volume levels if the phone is close to your ear, or if you
are using the stereo headset. Exposure to excessive volume
levels may damage hearing.
You can store video clips both internally and externally. You can
also copy them between the internal memory and the Memory
Stick. See ‘Folders’ on page 28.
While a video clip plays, tap the screen to display the video clip
in widescreen. Tap the screen again to go back. Specify the
To adjust the volume
Rotate the Jog Dial up to increase the volume, and down to
decrease the volume.
screen orientation in Edit > Preferences > Display
.
68
Video
This is the Internet version of the user’s guide. © Print only for private use.
To copy, delete or move multiple video clips
In this view you can send,
rename, delete or move your
video clips. Only the video
clips saved in your P910i or
on the Memory Stick (that is
not streamed) can be handled
in the detail view.
•
In the list view, select the video clips you want to delete,
move or copy, by selecting the check boxes beside the picture
names. Then select Video > the command you want.
V
i
d
e
o E
d
i
t
Sports
Diving in the ocean
•
To delete you can also use the Storage manager found in the
Control panel. For more information, refer to ‘Folders’ on
page 28.
To rename a video clip
To sort the video clips
Select Edit and choose how you want to sort the video clips in
the current folder.
1. Select Video > Rename clip
.
2. Enter a video clip name
>
Done
.
Two or more video clips
cannot have the same
name.
Press the camera button
CommuniCorder application.
view.
or select
to activate the
Playing
0:09
takes you back to the list
Tip Use the Folder function
to organize all your video
clips.
Managing video clips
The detail view is intended for managing one clip at a time. You
can play and pause the clip by tapping and , and stop by
tapping
To copy the current video clip to another folder, select Video >
Copy to, then select a folder from the list.
.
To view the video clip information
The slider under the video area shows the current play position
within the clip. Tap and drag the slider to move to another
position.
Select Video > Info
.
Video
69
This is the Internet version of the user’s guide. © Print only for private use.
To delete a video clip
Streaming
1. Select the video clip you want to delete.
Streaming is a data transfer method making multimedia
2. Select Video > Delete clips
.
available in real-time. You can, for example, listen to audio and
watch video almost at the same time as it is sent.
Saving video clips
The data in the file is divided into small packets that are sent in a
continuous flow, a stream.You can then begin viewing the file
from the beginning as the rest of the packets are sent. The short
delay at the start is to enable a small amount of data to be
buffered.
When you play video clips that you have received via email or
multimedia messaging, or that you have downloaded to your
P910i from the Web, the viewer detail view is automatically
launched. From the viewer detail view you can then save the
video clip to your P910i.
Your P910i can receive streaming multimedia.
To save a video clip from another application
Applications
1. Select the video clip you want to save.
Streaming applications can be classified into on-demand and
live applications.
2. Select Video > Save clip
.
3. Select the folder you want to save the video clip in > Save
.
Examples of on-demand applications are:
Sending and receiving video clips
You can send and receive video clips using Video > Send as. See
‘Sending and receiving items’ on page 30.
•
•
•
•
•
Streaming of music.
Streaming of news (video and audio).
Streaming of movie trailers.
Streaming and download of video.
Live streaming of music or video (broadcast).
70
Video
This is the Internet version of the user’s guide. © Print only for private use.
How to connect to a streaming service
Preferences
•
If you know the URL of the streaming service:
When you view a video clip in full screen mode, you can select
the orientation of the picture
1. Select Video > Open location
.
2. Enter the URL of the streaming service, or select a service
from the drop-down list.
To change the orientation of the picture in full screen mode
1. Select Edit > Preferences
.
3. Tap Done
.
2. Select the Display tab.
•
If you do not know the URL of the streaming service:
3. Tap Left-handed or Right-handed orientation > Done
.
1. Open Internet and browse to the site where the service is.
When you view a video clip from a Web site, using the
streaming function, a media buffer is used to provide a steady
flow of data. Increasing the size of the media buffer may
improve the play-back of the video clip.
2. Select the item you want to play, for example a video.
The site server will download part of the video to the P910i
buffer memory. This will take a short while. When the buffer
memory is filled, the Video player will open the detail view,
described above, and play the video seamlessly.
To change the media buffer size
1. Select Edit > Preferences
.
2. Select the Buffering tab.
3. Select Custom setting and move the slider left or right > Done
.
When you download a video clip to your P910i, it is saved in the
download cache memory. When this memory is full, you have to
empty it to be able to download new video clips to your P910i.
To clear the download cache
1. Select Edit > Preferences
.
2. Select the Buffering tab.
Video
71
This is the Internet version of the user’s guide. © Print only for private use.
3. Select Clear Cache > Done
.
When you view a video clip from a Web site, you may have to
set the proxy settings.
To change the proxy settings
1. Select Edit > Preferences
.
2. Select the Proxy tab.
•
If the proxy settings set in the control panel are to be used,
tap Automatic configuration
.
•
If the manual settings are to be used, enter the relevant
information.
72
Video
This is the Internet version of the user’s guide. © Print only for private use.
Music player
Your P910i has mobile music in the form of a stereo music
player. With the music player you can listen to single music
tracks or entire folders with tracks. You can download tracks to
your P910i from a PC, the Internet or Memory Stick, and create
different folders with tracks. Your P910i supports a number of
different sound files, including the popular MP3 format. See
‘Technical data’ on page 197 for more information on supported
file types.
If you navigate to the standby screen while you play music, you
can press
to pause. Press it again to play.
Press
to go back to the standby screen and launch another
application. The music will still play. If this application requires
dedicated audio, the playback will be paused.
If you use the Music player a lot, it can be useful to create flip
closed and flip open shortcuts to it. This way you can quickly
access the Music player when you for example want to adjust
the volume or change track folder. Refer to ‘Application
shortcuts’ on page 147 for more information.
You can store sound files both internally and on the Memory
Stick. You can also copy them between the internal memory and
the Memory Stick. See ‘Folders’ on page 28.
Jog Dial control
Rotate the Jog Dial to select a sound track. Press it inwards to
play. Press it again to stop.
When you receive a phone call while listening, the playback will
be paused. When you end the call, you must navigate back to the
Music application to restart playing.
Tip To listen to more music you can store music on several
To adjust the volume
Memory Sticks and carry them with you.
Rotate the Jog Dial up to increase the volume, and down to
decrease the volume.
Warning! The volume may be uncomfortably loud at the
higher volume levels if the phone is close to your ear, or if you
are using the stereo headset. Exposure to excessive volume
levels may damage hearing.
Playing sound files
You can play MP3 music both in flip closed and in flip open. In
flip closed, with the Jog Dial, select
select the track you want to play. Press
commands.
, select Music player, and
to find other
Music player
73
This is the Internet version of the user’s guide. © Print only for private use.
To play a list randomly
Track-folder view
Select Music > Random
.
This view is intended for
playing entire folders with
MP3 files. In the track-folder
Music Edit
All
Sony Ericsson
Managing sound files
view you can
Play,
Pause, and
Stop the
0:00/3:35
playback of the current folder,
and see the duration of the
track. Selecting a track and
File list view
In the file list view you can
see how many tracks you
have in the current folder.
Tapping a file name will open
the detail view, and allow you
to play and manage that file.
Music Edit
All
Aeroplane
tapping
will play the
Aeroplane
Beautiful Night
Rooster
Song for you
Sony Ericsson theme
Standing Still
Beautiful Night
Rooster
selected track and all the
following tracks in the folder.
Use the slider to move
forwards and backwards in
the track. Select Music >
Manage tracks to move to the
file list view.
Song for you
Sony Ericsson theme
Standing Still
Stuck with You...
Walk on
To copy, delete or move
multiple files, select the files
you want to delete, move or
copy, by selecting the check
boxes beside the file names.
Then select Music > the
Loop and random
With the loop function you can decide if you want to listen to
the tracks in the current folder only once, or if you want to loop
them until you manually stop the play-back. Select the random
function to play the tracks randomly.
command you want.
8 tracks (6806 KB)
To delete you can also use the
Storage manager found in the
Control panel. For more information, refer to ‘Folders’ on
page 28.
To loop a list
Select Music > Loop
.
Tap
to move directly to the track-folder view.
74
Music player
This is the Internet version of the user’s guide. © Print only for private use.
To delete a track from the P910i
Detail view
1. Select Music > Delete track
.
The detail view is intended for managing one file at a time. Tap
a file name to open the detail view. You can also play and pause
2. Select Yes
.
the file by tapping
and
.
Viewer
In the detail view you can move tracks between your different
folders using the folder function, or rename or delete them.
If you play sound tracks remotely, for example music on an
Internet site, a view similar to the detail view displays. The
commands you find in this view are similar to those in the Detail
view.
The detail view displays the
name of the track, the artist’s
name, the album title, the
track number, the copyright
year, the sound file type and
the duration of the track.
Music Edit
Aeroplane
Artist:
Unfiled
Managing track folders
In the track-folder view, the Music player plays the MP3 files of
the selected folder. (With one exception, the All folder. If you
select this folder, all MP3 files in all music folders will be
played.) Using the folder function you can create new folders
for sound tracks. You can create folders on the Memory Stick.
You can also use several Memory Sticks for your music, for
example.
Album:
Note The amount of
information displayed
depends on how much
information is available on
the sound file.
Filename:
Aeroplane
Date and Size:
6:02pm, 21/06/04
2107KB
Duration:
3:35
Move between the tracks in
the current folder using the
In any Music player view, you can create a new folder using the
Edit Folders command in the folder menu. Then you move or
copy your sound files to the new folder. You can add more
folders with sounds as long as there is memory available. You
can also sort the files using commands in the Edit menu.
0:00
and
buttons.
To rename a track
1. Select Music > Rename track
.
2. Enter a track name and tap Done
.
Two or more tracks cannot have the same name.
Music player
75
This is the Internet version of the user’s guide. © Print only for private use.
Preferences
You can choose if you want all types of sound files to be
displayed in the file list view, or if you want to display only a
certain type of sound file.
To select sound file types
1. Select Edit > Preferences from the file list view.
2. Check the boxes next to the sound files you want to include
in the track folders and tap Done
.
Saving sound files
When you receive sound files in other applications, such as
email and multimedia messages, you activate the viewer in your
P910i. From the viewer you can then save the sound file
to your P910i.
To save a track from another application
1. Tap the save (floppy disk) icon or select Music and tap Save
.
2. Select the folder you want to save the track in and tap Save
.
Sending and receiving sound files
You can send and receive sound files using Send as. See
‘Sending and receiving items’ on page 30.
76
Music player
This is the Internet version of the user’s guide. © Print only for private use.
Internet
You use
Internet, the P910i browser, to:
services it might be necessary to set up a WAP account in the
Control panel as well. See ‘Getting started with Internet and
Messages’ on page 171.
•
•
•
Connect to the Internet to view and access Web and WAP
pages.
Receive and view Push messages from your WAP service
provider.
To start the browser Start the browser by:
– pressing the Internet button.
Download Java applications, images and audio.
– selecting
in the application picker.
in the application
– selecting
launcher
The browser can open Web pages that use Java script or frames,
but functions that use Java script in the Web page will not work
properly.
.
– selecting a URL in another application.
Note If required, you have to enter your username and
password to log in to your Internet account.
You can save bookmarks to viewed pages, to be able to access
them easily. You can also save pages in the P910i for off-line
viewing.
While opening a page, the P910i might not receive incoming
calls. However, when the page is properly opened you can
receive a call and the page will still be open.
The browser uses folders for categorising information. The
folders used are bookmarks, saved pages, signed documents,
and Push messages.
The application has two views:
Push messages is a service that gives you notifications about, for
example, weather forecasts, sport results, and stock quotes. The
notification is sent to you as a message that contains a WAP link
to the site with the information you subscribe to.
Browser view The base view of the application, where you can
view Web and WAP pages.
Bookmarks
view
A list view where you can save shortcuts:
• to Web and WAP sites on the Internet
• to locally stored pages
Before you can use Internet, you need to set up an Internet
account in the Control panel. If you intend to use certain WAP
• to documents digitally signed by you.
Internet
77
This is the Internet version of the user’s guide. © Print only for private use.
Browser view options
Using the browser view
•
Internet menu
The P910i can display the
Internet page in normal view
or full screen view. Use the
Internet button to change
between the views. In full
screen view, press the Jog Dial
forwards to display a menu
with the most frequently used
commands.
–
–
–
–
Open page – Enter the URL, or select from the drop-down
list.
0:03
K
J
A
B
Add to bookmarks – Enter the name of the bookmark and
select the folder to save it in.
I
n
te
r
ne
t
dit
E
Save page – Enter the name of the page and select the
folder to save it in.
Send as – Send the current URL via text or multimedia
message, email, Infrared, or Bluetooth wireless
technology.
H
G
C
Sony Ericsson
D
E
–
–
Find – Enter text and search for the text in the page.
A
B
C
D
E
F
Internet menu.
Find next – Search for the next occurrence of the search
text.
Edit menu.
Go to the next page.
Go to the previous page.
–
–
–
–
–
–
Scan text – Go to the area with the greatest amount of text.
Back – Move bact to the previously viewed page.
Reload page – Reload the page.
F
Shift between the browser view and the bookmarks view.
Disconnect or get information about the connection.
Go to the home page.
Load all images – Load all images of the page.
Page information – Show the page information.
Bookmarks – Open the bookmark view.
G
H
J
Stop loading the page.
A secure connection is established.
Progress bar, shows the loading progress.
•
Edit menu
K
–
–
–
Cut – Cut out the marked information from an input field.
Copy – Copy the marked information.
Copy all – Copy all information on the page.
78
Internet
This is the Internet version of the user’s guide. © Print only for private use.
–
–
–
–
–
–
Paste – Paste the copied text into the selected field.
Full screen – Expand the browser view.
–
Scan text function – Press the Jog Dial inwards (when no
link is selected) to scan the page for text. The screen will
navigate to the area with the greatest amount of text.
Repeat the operation to find the next greatest area of text
Narrow layout – Adjust web page to screen witdh.
Zoom – Select zoom level: Small, Medium or Large.
Preferences – Set the preferences of the browser.
Help – View help on Internet.
–
Short forwards – In Normal view, change between the
Internet and the Edit menus. In full screen view, show a
menu with the most frequently used commands.
•
Internet button
Context-sensitive menus
The context-sensitive menu is opened when you keep the stylus
pressed on a link or a picture.
–
Full screen – When you have opened an Internet page,
press the Internet button to display the page in full screen.
–
Normal browser view – Press the Internet button again to go
•
Text link and picture link
back.
–
–
–
Open link – Open the active link.
•
•
Handles on the screen – Use the handles on the screen to scroll:
Link information – Show information on the link.
–
Scroll up and down – Tap the handle to the right of the
Add to bookmarks – Add the active link URL to the
bookmark list.
screen and drag it up or down.
–
Scroll left and right – Tap the handle at the bottom of the
•
Loaded picture (with or without link)
screen and drag it to the left or to the right.
–
–
–
Save image – Save the picture in the P910i.
Jog Dial
Copy image – Copy the picture to the clipboard.
–
One hand navigation – In an open page, rotate the Jog Dial
View image – View the picture adapted to the screen
(enlarged or reduced).
slowly to go to next link. Press the Jog Dial inwards to
select the link.
–
Send image as – Send the picture as text or multimedia
message, email, infrared, or Bluetooth wireless
technology.
–
Scroll up and down – In an open page, rotate the Jog Dial
fast to scroll up and down.
Internet
79
This is the Internet version of the user’s guide. © Print only for private use.
•
•
Not loaded picture (with or without link)
To navigate through recently opened pages
–
Load image – Load the picture.
1. Select
2. Select
to move back to previously viewed pages.
to move forwards again.
Voice call link
–
–
–
–
Call – Place a call according to the link.
To save a page for off-line browsing
New SMS – Send an SMS message according to the link.
New MMS – Send an MMS message according to the link.
New contact – Create a contact with the link information.
1. Select Internet > Save page
.
2. Change the page name, if required, and select a folder to save
it in.
•
Mail to link
3. Select Done.
–
–
–
New email – Send an email according to the link.
New MMS – Send an MMS message according to the link.
To create a bookmark to the open page
New contact – Create a contact with the link information.
1. Select Internet > Add to bookmarks.
2. Change the bookmark name, if required, and select a folder
to save it in.
Icons within a page
Picture not loaded (can be loaded manually).
3. Select Done.
Damaged picture (not possible to load).
To download and upload files, for example, applications
Note If images are not loaded, select the picture icons
•
•
When you select a link to a downloadable file, for example,
applications, images and so on, information on the file is
displayed.
or select Internet > Load all images.
To open a specific Web page
Select Yes to start the download.
1. Select Internet > Open page.
2. Enter the page URL or select a previously viewed page from
the drop-down list.
When you select a link for uploading a file, a form for
submitting the file is displayed.
3. Select Open.
Select the file and select Yes to start the upload.
80
Internet
This is the Internet version of the user’s guide. © Print only for private use.
To view information on the open page
User authentication request
Whenever a user authentication is requested, you have the
possibility to either select a certificate and confirm the user
authentication, to select to continue anonymously or to cancel
the connection.
1. Select Internet > Page information.
2. Select the Content tab to view the page information.
3. Select the Connection tab to view information on the
connection.
If Connect anonymously has been set, the browser will instead
automatically try to connect anonymously.
4. Select the Certificates button to view the information on:
– Server
– User
Using the bookmark view
To disconnect from the Internet
A
1. Select the connection icon (HSCSD/CSD
in the status bar.
or GPRS
)
B
A
B
C
D
Folder menu.
Edit menu.
C
D
I
n
te
r
ne
t
E
dit
All
2. Select Disconnect from the pop-up menu
Search Internet
My home page
SonyEricsson
News
Internet menu.
3. The dialog Do you want to disconnect, Yes/No appears.
4. Select Yes
Select an icon to view
information on the bookmark.
.
Webmail
E
Project home
711 time table
CSS fonts
E
F
Checked bookmarks can be
deleted from the Internet
menu.
WIM Access
When the browser requires access to the WIM card, for
example, when establishing a secure connection, you have to
enter the correct PIN. For more information, please contact your
service provider or IT department.
F
Select the bookmark text to
open the page.
G
G
H
Select to go to the home page.
H
Signing documents
You have to enter the signing PIN each time a signing operation
is going to be performed.
Shift between browser and
bookmarks views.
Internet
81
This is the Internet version of the user’s guide. © Print only for private use.
Bookmark view options
Icons
Bookmark
•
Internet menu
–
–
–
Open page – Enter the URL, or select from the drop-down
list.
Saved page
Push message from the WAP service provider
Signed document
New bookmark – Enter the URL, the name of the bookmark
and select the folder to save it in.
Delete – Delete the selected bookmark.
To open a bookmark
•
Edit menu
1. Select the bookmark text.
2. The bookmarked item is opened.
–
–
Edit – Edit the selected bookmark.
Sort by date / name – Sort the entries. (Available for Push
messages and Signed documents only.)
To view bookmark information
–
–
–
Zoom – Select zoom level: Small, Medium or Large.
Preferences – Set the preferences of the browser.
Help – Open the help for Internet.
1. Select the check box of the preferred bookmark.
2. Select Edit > Edit
.
Information on the bookmark is shown. From the
information screen you can:
•
Folders menu
–
–
All – Show all bookmarks in the list.
– Edit the bookmark.
Bookmarks – Show the bookmarks in the Bookmarks
folder.
– Delete the bookmark.
– Send the bookmark as an email, SMS message, Bluetooth
wireless technology, infrared, or MMS message.
–
–
–
Saved pages – Show all saved pages.
Unfiled – Show the bookmarks that are not in a folder.
Edit folders – Categorize your bookmarks in folders
(business, personal and so on).
To delete several bookmarks
1. Select the check box of the bookmarks to delete.
2. Select Internet > Delete.
The contents in the Folders menu can change depending on the
pages and bookmarks stored in the P910i.
3. Select Yes to confirm.
82
Internet
This is the Internet version of the user’s guide. © Print only for private use.
Basic settings
Preferences
– Enter the URL for the page to be shown when the browser
The browser is initially set up to work, but you have to set up
is started from the Internet button; either a page stored in
the P910i or a page on the Internet.
your own account. A simple way of setting up an Internet
account is to use the Web phone setup-message generator on
www.SonyEricsson.com. See also ‘Internet accounts’ on
page 155 for more information.
– Select the WAP account to be used when the home page is
loaded. The accounts are set up in the control panel.
– Select if a new page should be displayed over the whole
The easiest way to set up Internet and WAP accounts is to ask
screen.
your Internet service provider to send you an auto setup message
– Select if you want to use a vertical scroll bar to scroll the
containing the required setup information. The accounts will
pages up and down. Otherwise you can use the Jog Dial.
then be set up automatically on your P910i. To guarantee the
– Select if images should be loaded. If images are not
integrity of the settings, a PIN may be used.
loaded, the page will be loaded faster. Non-loaded images
example on-line banking, can only be accessed from a particular
WAP account. See ‘WAP accounts’ on page 165 for more
information.
can be loaded manually when viewing the page.
– Select if sounds should be played when the page is
opened.
– Select if animations should be played when the page is
opened.
Note Proxy settings for MMS messages, and for a WAP gateway
should be set in the WAP accounts. Other proxy settings should
be set in the Internet accounts.
Security settings
– Select if you want to save signed documents.
– Select if you want to connect without giving away your
identity.
1. Select Edit > Preferences
.
– Select if you want to connect using the WIM card.
– Select if you want to allow cookies.
2. Perform the setup according to the following:
Internet
83
This is the Internet version of the user’s guide. © Print only for private use.
Advanced settings
– Select if you want to be able to receive messages from
your WAP service provider.
– Select if you want to automatically open the URL in WAP
Push messages.
– Select if you want to remove out-of-date messages
automatically.
– Select a sound that notifies you when a Push message
arrives.
– Set the size of the cache memory. The cache is the part of
the memory where viewed pages are stored. Stored pages
will load faster when you visit them again.
– Select Clear history to empty the list of pages visited and
cookies stored.
– Select Clear cache to empty the cache memory.
84
Internet
This is the Internet version of the user’s guide. © Print only for private use.
Games
–
Played – Select if you want to play locally against your
Chess and the card game Solitaire.
P910i or against another P910i user.
More games are available on the Content and Application CD in
your original P910i box. You can also install games from other
developers, see ‘Installing applications’ on page 131.
3. Tap Play to start the game.
To play Chess
1. Select the piece you want to move.
The square where it is standing will now be marked with a
triangle.
Chess
You can play Chess against the P910i, or against another P910i
user via SMS.
2. Select the square to which you want to move the piece and
the piece will move to it.
Please read the help texts for detailed information on how to set
up and play Chess.
Closing the flip closes the game temporarily and saves the
session status. Your opponent will be sent an end-of-game text
message.
To start a new game
1. Select Chess > New game to initiate a game.
2. Enter details as desired in the New game dialog. You can
return to these details later.
–
Name – Give the game a name so you can return to it later
if you have to interrupt it.
–
–
–
Notes – Write a note about the game.
You play – Choose to play white or black.
Against – Select the level of your opponent.
Games
85
This is the Internet version of the user’s guide. © Print only for private use.
•
Aces are low and may not be played onto kings. Jokers can
be played onto any card and any card can be played onto a
joker.
Solitaire
Solitaire is a card game played with a standard deck of 52 cards
and up to 4 Jokers.
The purpose of Solitaire is to remove all the cards from the piles
to the layout card while scoring as many points as possible.
Play Solitaire
Solitaire is only available with the flip open.
Points are awarded for playing pile cards and bonus points are
awarded for unbroken, ascending or descending runs of four or
more rank cards.
1. Select the icon for Solitaire.
The game will either start with a new game or with the layout
for an earlier, interrupted game. (the game data is saved on
return to desktop, when the flip is closed or when the battery
is low).
When you cannot play any more cards and cards still remain in
the piles, the game is over. If all the pile cards are removed,
bonus points are awarded and the hand is won. You are then
challenged to play a Higher/Lower game to acquire more bonus
points. After the challenge, the game continues and a new hand
is dealt with one less Joker.
2. Select the card you want to move and it will be higlighted.
3. Select the card to which you would like to move the
higlighted card.
To restart the game during a game
Select Solitaire > New game.
Rules
When the game starts, 35 cards are dealt from the deck into
7 piles of 5 cards. A further card is then dealt face up from the
layout card.
To undo/redo a move
Select Edit > Undo move / Redo move.
•
•
Cards can only be played from the bottom of the piles.
To play a pile card it must have a face value of one more or
one less than the layout card.
86
Games
This is the Internet version of the user’s guide. © Print only for private use.
BUSINESS
Messages
With
types of messages:
Messages you can create, send, and receive different
– Files for exchanging electronic business cards (vCard)
and calendar information (vCal).
•
•
Auto setup files for OTA (Over The Air) configuration.
SMS (Short Message Service) messages are text
messages sent and received via the network operator's
message centre. When a text message has pictures,
sounds, melodies and animations inserted, it becomes
an EMS (Enhanced Message Service).
Beamed messages. These are files received via infrared or
Bluetooth wireless technology.
The different types of messages are handled by separate
messaging accounts. Select
Messaging accounts to see the details of the messaging accounts
Control panel > Connections >
MMS (Multimedia Message Service) messages.
A multimedia message can contain text, graphics,
animations, photographic images, audio clips and ring
melodies.
on your P910i.
You can have any number of email accounts - a typical
configuration will be one business and one personal account.
When you set up a synchronization with your PC, an account for
synchronized email is automatically created on your P910i.
Email messages. Your P910i mail client supports POP3
and IMAP4 mail servers, MIME attachments and
SMTP for sending mail.
You also use Messages to receive:
With the flip closed, text and multimedia messages can be sent
and received using the Jog Dial and the keypad. More advanced
tasks are, however, best handled with the flip open.
•
Area Information messages.These are text messages
broadcast to all subscribers in a network area, for example
local road reports or local taxi phone numbers. (Area
Information services are not available from all operators).
Before using Messages
Before you can send and receive any messages (except for SMS)
you need to set up the necessary accounts.
•
BIO (Bearer Independent Object) messages. There are
different types of messages:
– Setup (email, Internet, WAP accounts).
– Email notifications.
Messages
87
This is the Internet version of the user’s guide. © Print only for private use.
A simple way of setting up an Internet, email, or MMS account
is to ask your service provider to send you a message that
contains the required information to create an account
automatically on your P910i. You can also use the Web phone
setup-message generator on www.SonyEricsson.com. Received
auto-setup messages are stored in the Auto setup inbox.
To save an email message to Outbox
1. After composing your message, select Send.
2. Select Save to outbox.
Messages that you send from an email synchronization account
are always saved to Outbox and sent from your PC after your
next synchronization.
See ‘Getting started with Internet and Messages’ on page 171.
Draft
Folders in Messages
Draft contains messages that are not ready to be sent.
Messaging accounts can have the following folders: Inbox
,
To store a new message in Draft
Outbox Draft, Sent, and folders you can create yourself, local
,
Create the message and exit without selecting Send
.
folders. You can also subscribe to folders based on a server
account.
To move a message from Outbox to Draft
Open the Outbox message list, select the message, and select
Message > Move to draft
.
Inbox
Inbox contains received messages. You can reply to, forward,
and delete messages, but not edit them.
Sent
Sent contains messages you have sent from your P910i.
Tip Regularly delete old messages from your Sent folder,
especially those with attachments, to clear storage space.
Outbox
Outbox contains messages that are ready to be sent. If you are
creating several messages, and not using GPRS, you can reduce
connection time by saving them to Outbox and then connect and
send them all at the same time.
88
Messages
This is the Internet version of the user’s guide. © Print only for private use.
command to download messages from the folders you have
subscribed to.
Local folders
To create a new folder
1. From the folder menu, select Edit folders
2. Tap Add
3. Name the folder.
4. Tap Done
.
The accounts in Messages
.
When you open Messages, a list of your accounts appears.
The top items in the list, Create SMS, and Create MMS, are
.
shortcuts for directly creating new messages.
Remote folders
An asterisk next to an account indicates that a message has
arrived since you last opened the accounts inbox.
If you have selected connection type IMAP for your email
account, you can subscribe to remote folders on your email
server. (To select connection type, see “Email account basic tab
settings” on page 160.) By default you subscribe to an Inbox
folder.
Handling text messages
A text message is sent via SMS (Short Message Service). It can
contain up to 160 characters (70 characters if you use non-Latin
characters). If you create a longer message it will be sent as two
(or more) separate messages (concatenated), but will usually be
received as one message. If you add pictures, sounds and other
items to your message it becomes an EMS message.
Note If you change connection type, your Inbox will be emptied.
Use the Get&send command to download your messages again.
See “Get and send” on page 98.
To subscribe to a new remote folder
1. From the folder menu, select Subscribe
2. Select the check box for the folders you wish to subscribe to.
3. Tap Done
.
Text messages can be sent to one or more people (not more than
thirty, we recommend), and you can request a delivery report
when your text messages have been delivered to the recipients.
The delivery report arrives on your P910i as a text message.
.
The new folders are shown in the folder list. Your subscribed
folders will be shown in a flat structure, that is, subfolders will
be shown on the same level as main folders. Use the Get&send
Messages
89
This is the Internet version of the user’s guide. © Print only for private use.
If you leave the message before sending it, it will automatically
be stored in the Draft folder (unless you edit a message which
was already located in Outbox).
•
Tap
to insert a sound. The sounds last used appear.
– Tap More to get more sounds to use.
a
•
•
Tap
Tap
to write bold text.
a
Tip To enter several addresses manually (without using
Contacts) in a text message, multimedia message or in an email:
enter a comma between each address.
to change the size of the text you write.
To format the text in the message using EMS features
1. Highlight the text you want to format.
2. Tap Edit > Format text.
To write and send a text message
1. In
Messages select Create SMS. (You can also select SMS >
tap Message > New.)
3. Tap General tab to change the Alignment and Font
.
2. Enter the recipient’s number or select To and select recipient
4. Tap Style tab to check the character style check boxes: bold,
or recipients from your contact list and select Done.
italic, underline, or strike through.
3. Write your message.
5. Select Done
.
4. Go to the address tab
delivery report or not.
and specify whether you want a
a
You can also use the icons
and
described above.
a
To save a received EMS item
5. Tap Send.
1. Tap the item.
To add an EMS item to your text message
Use the icons at the bottom of the screen to select the type of
item you wish to add.
2. Select Edit > Save object
.
•
•
Tap
Tap
to insert one of the smilies that appear.
Handling multimedia messages
to insert a picture or an animation. The pictures and
MMS (Multimedia Messaging Service) messages can include
pictures, animations and sound, organized like a slide
presentation with time-based control of the playback.
Composing a multimedia message is like building a small slide
animations last used appear.
– Tap More to get more pictures and animations to use.
– Tap New to draw a picture of your own.
90
Messages
This is the Internet version of the user’s guide. © Print only for private use.
presentation. A typical page will consist of a picture, some text
and sound. Refer to Technical data, section ‘MMS’ on page 199
for supported file types that you can add.
The first time a multimedia message is opened it plays
automatically. The next time you open the message you can
play it by pressing the Play Button (flip open) or by choosing
Play from the menu (flip closed).
You can take a picture with the CommuniCorder and send it as a
multimedia message using the Send as command from Pictures.
Multimedia messages can be sent to a mobile phone or an email
account.
To forward an MMS
1. Open the message.
2. From the Message menu, select Forward
3. On the address tab, select To and enter the recipient’s
mobile number or email address.
4. Select Send
.
How a recipient receives an MMS you send depends on your
MMS service and how the receiving phone complies to MMS
specifications. Phones can, for example, only receieve pictures
of a maximum size, video and sound.
.
Your P910i can help you to create messages which conform to
standard and therefore are more likely to reach recipients. Set
the Content alert to warn or restrict you. See “MMS Advanced
settings tabs” on page 163.
To store a received MMS item, for example a picture
1. Open the message.
2. Select the picture you want to save.
3. Select Save picture or select Edit > Save picture
.
Tip To enter several addresses manually (without using
Contacts) in a text message, multimedia message or in an email:
enter a comma between each address.
4. Select the storage location.
5. Select Save
.
You can store items both internally and externally. You can also
copy them between the internal memory and the Memory Stick.
See ‘Folders’ on page 28.
Incoming multimedia messages
To play a received multimedia message
•
Open the MMS inbox and select the new message.
Creating and sending multimedia messages
You can create multimedia messages in the P910i but you can
also use the MMS editor on the Content and Application CD.
Messages
91
This is the Internet version of the user’s guide. © Print only for private use.
To create a new multimedia message
1. In
Message > New. or open an existing message and select
6. Select Edit > Background colour to give the message a
background colour.
Messages select Create MMS. (You can also select MMS >
7. Tap
to add a new page to the multimedia message in
Message > New ).
which you can insert items.
2. From the Select template dialog, tap the name of the template
you want and tap Select. The Blank template will open a blank
message.
8. Select Edit > Page order to change the page order in the
message.
To enter the recipient’s phone number
3. The first page of the new
message is now displayed.
1. Select the
address tab.
M
e
s
sag
e
Edit
Draft
Select an item from the
menu that appears.
2. Select To and select the recipient from Contacts.
or:
2
1/1
Tap
if it does not open
automatically If you
to open the menu
Select the line beside To and enter the recipient’s mobile
number or email address.
CommuniCorder
Add video
.
To insert an attachment
select Add scribble the
Image editor presents a
white background onto
which manual graphics
can be added. The Image
Editor includes controls
for pen, crop, colour,
scale, rotate and pen
width.
Add picture
Add scribble
Add text
1. While creating your multimedia message, select the
attachment tab, select Add
.
Add sound
2. Select the type of attachment you want to add.
3. Select the attachment.
Add recording
Paste
To send the multimedia message
Send
Tap Send
.
4. Tap
audio or voice to the page. Tap the page to return to it.
5. Tap if you want to change the time this page should be
shown. Default time is 5 seconds.
again to add text,
Preferences to a multimedia message
Select Edit > Preferences to set the preferences to a multimedia
message. The following settings are available:
92
Messages
This is the Internet version of the user’s guide. © Print only for private use.
•
•
•
Hide number – Prevent your phone number from being
displayed in the recipient’s phone. (Subscription dependent).
To edit item time
For each item in a page, it is possible to set the time when the
item appears and for how long it is displayed or played.
Read report – Request a receipt when the recipient has opened
your message.
1. Select the item so it is highlighted
Delivery report – Request a receipt when the message has been
delivered to the recipient’s phone.
2. Select Edit time
3. Set the Start, which is the number of seconds before the item
appears after the start of the page. The default is 0, meaning
show or play immediately.
Editing multimedia messages
Here you can see the first
page with an inserted
picture.
4. The default Duration is for the item to continue for the
remaining duration of the page. To change this, un-check
Page time and change the duration to the required value in
seconds. Start time + duration cannot exceed total page time.
If you have added video or sound and the page time is longer
than the video or sound play time, the video or sound will
only play once (it will not be repeated in leftover page time).
M
e
s
sag
e
Edit
Draft
5
1/1
10kb
To delete, replace or edit an
inserted item
Select the inserted item and
choose an action.
You can also tap
settings for all items in a page. Tap the time bar to adjust the
time settings for each item.
, or select Edit > Page time to see the time
While editing an image you
can add scribble, resize, crop
or rotate your image or add
text. To undo your changes,
select Edit > Undo all.
Edit picture
Edit time
Delete
Copy
To add or delete a template
•
To make a template from a message, select Save as template,
give the template a name, and tap Done
Note If you have accepted
changes by selecting Done,
you will not be able to undo
them.
.
Send
•
To delete a template, tap the name of the template you want
in the Select template dialog and tap Delete
.
Messages
93
This is the Internet version of the user’s guide. © Print only for private use.
To set the download method for receiving multimedia
messages, manual or automatic
To enter addresses from Contacts when writing an email
1. Select To:
•
In
Control panel, select Connections > Messaging accounts >
2. In the Select contact dialog select the check box for each entry
MMS > Automatic.
you want to send the email to.
–
–
–
Off means that only headers will be downloaded and can
be viewed.
3. Select Done.
Tip To enter several addresses manually (without using
Contacts) in a text message, multimedia message or in an email:
enter a comma between each address.
Home only means the same as for On below, but is only
valid in your home country.
On means that the multimedia message is downloaded and
can be read like any other message. There is no
intermediate step.
Sending email
To send an email message
Select Send > Send immediately
.
Handling email
If your P910i is connected to the Internet when you send an
email, it will be sent immediately and your P910i will remain
connected to the Internet. If not, your P910i will connect to the
Internet and then send the email.
Writing email
To write a new email
Tip If you are creating several messages, and not using GPRS,
you can reduce connection time by saving them to Outbox and
then connect and send them all at the same time.
Select an email account and select Message > New
.
If you leave the message before sending it, it will automatically
be stored in the Draft folder (unless you edit a message which
was already located in Outbox).
To save an email message and send it later
Select Send > Save to outbox
.
To mark an email as urgent
On the
address tab, select High in the Priority list.
94
Messages
This is the Internet version of the user’s guide. © Print only for private use.
To move an email message from Outbox to Draft
Calendar, Contacts, Tasks, and Jotter. You can use this service if
In your list of Outbox messages, tap to the left of the email (a tick
Send as is available in the application’s main menu.
appears), and select Message > Move to draft
.
To attach a Calendar entry to an email message
1. Open the entry in Calendar and select Calendar > Send As.
2. Select Email > Done.
If you leave the message before sending it, it will automatically
be stored in the Draft folder (unless it was created from Outbox).
Setting email preferences
Select Edit > Preferences to open the preferences dialogue.
3. Complete the email message and select Send
.
To attach a Contact to an email message
–
–
Email account – The email account you are currently using.
1. Open the contact details for the contact you wish to send and
Always attach your card – The entry in Contacts specified as
My card will be attached to your email messages.
select Contacts > Send as.
2. Select Email > Done.
–
–
Always reply with history – The contents of the email you
replay to is included in your new email.
3. Complete the email message and select Send.
Signature – The signature you write here ends your email
messages.
Receiving email
Email must be fetched from the email server on the Internet or at
your office. This can be done manually using the Get & send
function or automatically by requesting the P910i to check for
new email at certain times.
Adding attachments
To attach an entry to an email message
1. On the
attachment tab, select Add.
When you forward an email, you can choose whether or not to
forward the attachment. Large attachments increase the size of
an email and consequently the connection time needed to send
it.
2. Select the type of attachment you want to add, and select the
item.
‘Send as’ email
You can send an open entry as an attachment to a new email
from multimedia applications, document editors, Internet,
Messages
95
This is the Internet version of the user’s guide. © Print only for private use.
Receiving attachments
To specify a size limit for email, above which you only receive
a header
Any attachments to an email message are displayed on the
tab. The icon next to an attachment in the list identifies the
type of attachment.
1. Select
Control panel > Connections > Messaging accounts >
Email (select the email account) > Edit.
To view an attachment you need a viewer for that type of
file.Your P910i comes with pre-installed viewers for Microsoft
Word, Excel, and Adobe Acrobat (PDF) files.
2. Select Inbox.
3. Select an option from the Download list.
In your list of messages, headers are denoted by
.
To save an attachment, for example a picture
To download the full message
1. Open the email message and select the
tab.
1. In your list of messages, select the header.
2. Tap the attachment, which opens the Pictures application.
3. Select Pictures > Save
.
3. Select Yes
.
4. Select the location where you want to store the message.
5. Select Save
.
To download a series of messages
1. In your list of messages, select the check box to the left of
each entry (a tick appears).
You can store items both internally and externally. You can also
copy them between the internal memory and the Memory Stick.
See ‘Folders’ on page 28.
2. Select Get & Send
.
Downloading
Deleting messages
You can choose not to download large messages and receive just
a header instead. A header contains the subject line, sender’s
details, and date, but not the full message.
You can delete messages both locally and in your email server.
To delete a message locally
1. In your list of messages, select the check box to the left of the
message header.
2. Select Message > Local delete.
96
Messages
This is the Internet version of the user’s guide. © Print only for private use.
3. Select Yes
.
is not connected before sending an email, it will connect and
send the message, and then disconnect.
The message body and attachments are deleted but the heading
remains. You can download the message again later.
Note You can send text messages while connected to the
Internet. If your connection is CSD or HSCSD it must be
disconnected before you can make or receive a phone call.
If your connection is GPRS, it may be suspended to enable a
phone call to be made or received. You may need to repeat the
data activity (Web page fetch, get email) after the call has
ended.
To delete a message both locally and in your email server
1. In your list of messages, select the check box to the left of the
message header.
2. Select Message > Delete message.
3. Select Yes
.
If your P910i cannot connect to the email account, automatic
The message is deleted in your P910i and in your email server
and will no longer be visible in your message list.
download will fail, and
account.
will be displayed next to the email
Downloading email automatically
You can schedule your email messages to be downloaded
automatically at certain times.
A scheduled download will fail if your P910i is engaged in a
voice call. It may fail if it is connected to another ISP, that is,
through a different Internet account than specified for the email
account.
To download your email automatically
If email messages are not downloaded because a scheduled
download fails, they will be downloaded during the next
successful connection.
1. In Control Panel, select Connections > Messaging accounts >
Email.
2. Select the required email account and select Edit.
3. Select Inbox > Schedule.
4. Set time or interval for scheduled download and select Done
.
Disconnecting and connecting
If your P910i is already connected to the Internet when you send
an email, it will remain connected after sending it. If your P910i
Messages
97
This is the Internet version of the user’s guide. © Print only for private use.
Note If the email account is set up to access the mail server
through a Secure access connection (see ‘Secure tokens’ on
More about messaging
page 168) you must have the flip open when you use Get&send
.
If the flip is closed you will see an error message.
Finding messages
In both the list of accounts and list of messages, Find searches
through the subject lines, senders’ details, the text of the
message, and dates.
Mark read and unread
Use commands on the Edit menu to mark your received
messages read or unread. You can also make P910i show just
In an open message, Find searches through the text of the
message and highlights the text it finds.
unread messages. If you have selected connection type IMAP for
your email account, the read or unread status will be updated for
the messages on the server the next time you use the Get&send
command.
You can only search through email messages that have been
fully downloaded.
If you have changed the read or unread status for the messages
on the server, for example from your PC, the read and unread
status will change accordingly on your P910i.
Get and send
To get and send messages for one specific account
To select connection type, see “Email account basic tab
settings” on page 160.
1. Select
Messages.
2. Select the desired account (MMS or email for example).
Note If you change connection type, your Inbox will be emptied.
Use the Get&send command to download your messages again.
3. Select Get&send.
To get and send messages for all your accounts
1. Select
Messages.
Full screen view
2. Select Message > Get&send. Any unsent messages in your
Outbox will now be sent and new messages not yet
downloaded will be downloaded to your P910i.
Use the command Edit > Full screen to view your email messages
and MMS in full screen. You can also edit email in full screen.
Set your P910i to open email messages in full screen view by
default, see “Email account Inbox tab settings” on page 161,
98
Messages
This is the Internet version of the user’s guide. © Print only for private use.
and to play received MMS in full screen by default, see “MMS
3. The dialog Do you want to disconnect from Internet?, Yes/No
Advanced settings tabs” on page 163.
appears.
4. Select Yes
.
Saving contact details
If your service provider or network is
unavailable
When you receive a message, you can save the contact details of
the person who sent you the message.
Sometimes a message cannot be sent because your P910i cannot
connect to a network. Please check that the Messaging Account
and Internet Account information in the Control Panel is correct.
To save the sender’s details
On the message’s
Note If you save an address from an email message
synchronized from your company PC, the corporate version of
the address, rather than the full Internet email address, will be
saved to Contacts. If the corporate version of the address is not
an Internet address (an X.400 address, or just the sender's
name, for example), you can use it to send email from your
synchronized account, but you cannot use it in email that you
send directly from your P910i.
If you have both GPRS and Dial-Up Internet accounts, try
sending the email message using an account of the other type.
GPRS Internet accounts use the GPRS network and Dial-Up
Internet accounts use the GSM network.
Synchronized email
When you set up a synchronization with your PC, an account for
synchronized email messages is automatically created on your
P910i and indicated by
. You can have more than one
Connecting and disconnecting from the
Internet
account for synchronized email, but only one per PC. If you
send an email as PC mail, the mail will be sent via the PC when
you have synchronized your P910i with the PC.
To disconnect from the Internet
If you set up a POP or IMAP account which accesses the same
mail server, the two accounts will contain the same messages.
Note that there is no connection between the accounts; the
copies in each account are separate.
1. Select the connection icon (HSCSD/CSD
in the status bar.
or GPRS
)
2. Select Disconnect from the pop-up menu
Messages
99
This is the Internet version of the user’s guide. © Print only for private use.
Area information
Area information messages are text messages that are sent to all
subscribers in a certain network area, for example, a local traffic
report. When you receive an area information message, the
message automatically appears on the screen. When you dismiss
the information, it will be stored in the Area info Inbox until it is
replaced by a new message received on the same channel.
Please consult your service provider for more information about
the availability of area information services and area
information channel numbering. See ‘‘Area tab’ on page 164 for
more information.
100
Messages
This is the Internet version of the user’s guide. © Print only for private use.
Contacts
Contacts is like an address book, in which you can store names,
phone numbers, email addresses and other useful information,
including photos.
Menus
In both list view and detail view, you can use
some of the P910i’s contact functions. The options will vary
depending on the situation.
to access
The information stored in the SIM is also accessible. SIM
entries can be copied to Contacts and Contacts entries can be
copied to the SIM. Some SIM cards have Information numbers
and Service numbers stored on the SIM card by the operator.
These numbers are useful for service and information, and are
accessible from the SIM within Contacts.
Menu options in list view
•
•
SIM – Display the contacts of the SIM card.
Send my card – Send your owner card (See ‘Making an owner
card’ on page 107) via infrared or Bluetooth wireless
technology.
You can synchronize the contents in Contacts with one of the
PIM applications in your PC supported by the P910i. See
‘Synchronization and backup’ on page 139.
•
•
Find – Search for a specific contact.
Undo delete – Restore the last deleted contact. Will appear
only if there is something to undo.
•
# Applications – Access the application list view.
Using Contacts with the flip
closed
Menu options in detail view
Menu options in detail view: (availability depends on the type of
contact detail, for example mobile number, that is highlighted.)
With the flip closed, you can make calls and send text or
multimedia messages.
•
•
•
Send SMS – Send a multimedia message to the active contact
Send MMS – Send a text message to the active contact.
Call – Call the active contact.
Contacts has two views when the flip is closed:
An alphabetical list of contacts. The list view is the
starting point for finding a contact.
List view
The details for a contact.
Detail view
Contacts
101
This is the Internet version of the user’s guide. © Print only for private use.
•
Send as – Send the active contact using infrared or Bluetooth
wireless technology.
3. Select a contact and press the Jog Dial or press
the detail view for a contact.
to open
•
•
Delete contact – Delete the active contact.
To return to the list view, press
.
# Applications – Will access the application list view.
Note To make a call to a contact in the SIM, select SIM from the
options menu. If there are service numbers or information
numbers stored on the SIM card, you can also access them.
Menu options in SIM
•
•
View all – Switch to Contacts list.
To make a call
Service numbers – Display the service numbers on the SIM
card. This option is only displayed if there are service
numbers stored on the SIM card.
1. Select a phone number.
2. Press the Jog Dial or press
.
•
•
•
Information numbers – As for service numbers above.
Find – Search for a specific contact.
or
1. Select a phone number.
# Applications – Will access the application list view.
2. Select Call from the options menu.
To send a text message
Selecting a contact with the flip closed
1. Select a phone number.
To select a contact
2. Select Send SMS from the options menu.
1. Select
.
To send a multimedia message
1. Select a phone number.
2. Then either:
– Scroll down to the desired contact.
2. Select Send MMS from the options menu.
– Press a number key. The first contact corresponding to the
first letter of the key appears. To search further, continue
to enter the letters with the keys.
– Select Find from the menu and search for the contact.
102
Contacts
This is the Internet version of the user’s guide. © Print only for private use.
To add a contact
The details for a contact.
Detail view
Edit view
Contact details, displayed in a way that allows you
to add and change the information.
You can create a new contact using information from a recently
received voice call or message. See also ‘Add to contacts’ on
page 54.
Tabs at the bottom of the list view provide a fast way to locate
information. To highlight the first entry that begins with the first
letter on a tab, select the tab once. To highlight the first entry
that begins with the next letter on the tab, select the tab again,
and again for the third letter on the tab.
1. Select Yes when asked to add to contacts.
2. Enter contact name and edit the number, if required.
To delete a contact
abc def ghi jkl mno pqr stu v-z
1. Select the contact.
2. Select Delete contact from the options menu.
Making a call with the flip open
•
To open Contacts
options menu.
Tap
or select Contacts in the Application launcher
.
To make a call
Using Contacts with the flip
open
1. If required, change folder from the Folders menu.
2. Scroll down to the desired contact.
Open the flip and tap
launcher
or select Contacts in the Application
If the contact list is long, first select a tab at the bottom of the
view.
to open Contacts.
Contacts has three views when the flip is open:
3. Select the contact to display the contact details.
4. Depending on what you want to do, make one of the
following choices:
An alphabetical list of contacts. The list view is the
starting point for finding a contact.
List view
– Select
– Select
or
or the phone number to make a call.
or the email address to send an email.
Contacts
103
This is the Internet version of the user’s guide. © Print only for private use.
– Select
– Select
– Select
or the URL to open a Web page.
to send a multimedia message.
to send a text message.
Note Save mobile numbers as mobile numbers. Otherwise they
will not be available when addressing text messages.
To add a field to a contact
1. Select the contact.
Using service and information numbers
2. Select Edit > Edit contact.
3. Select Edit > Add field.
To call an Information number or Service number on the SIM
card
4. Select the field to be added from the drop-down list.
5. Select Add.
1. Select SIM in the folders menu.
2. Select Contacts > Information numbers / Service numbers and
select a phone number or select a sub-category and then a
phone number.
To add a DTMF tone sequence
1. Select a field and set it to Phone (h)
.
Add a new field if necessary.
3. Select Call
.
2. Enter a
p
and then the tone digits. Enter a to insert a pause.
p
It is necessary to start the tone sequence with a p so the
phone recognises it as a tone sequence.
Creating and editing contacts
You can sort the contacts according to first name, last name or
company. The contact entries can also be filtered by folder, such
To send a DTMF tone sequence during a call
1. During a call, open the contact’s detail view.
as Business or Personal
.
2. Tap
at the tone sequence.
To create a new contact
Read more about DTMF tones in ‘Controlling tone-based
services’ on page 49.
1. Select Contacts > New
.
2. Enter the desired information. When applicable, select from
the drop-down menus.
To add a voice dialling command
Contacts with a voice dialling command are shown in Voice
commands in the folders menu.
104
Contacts
This is the Internet version of the user’s guide. © Print only for private use.
1. Select
at the bottom of the screen.
To personalize the ring melody for a contact
Contacts with a personalized ring melody are shown in Personal
ring type in the folders menu.
2. Select a number.
3. Tap the Record button and record a voice command after the
tone.
1. Against Ring Tone, select Find sound from the drop-down
menu.
4. Tap Play to check the quality of the recording.
2. If required, change folder.
3. Select the required sound.
•
To remove a voice command, select the Del button.
To add a note to a contact
1. Select
4. Tap
and
to preview the sound.
.
5. Tap Select to set this sound for the contact.
2. Enter the text.
Note The selected ring melody will only be played if the
network provides a CLI (Calling Line Identity) to enable the
contact to be identified, otherwise the Default Melody will be
played.
3. If you do not want the note to be included when you send,
beam, or synchronize the contact, select the Private check
box.
Note If the ring melody selected for this contact is later deleted
To add a photo or other picture to a contact
or moved, the Default Melody will be played.
1. Select the photo view tab
2. Tap the picture space.
3. If required, change folder.
4. Select the picture to use.
5. Tap the Select button.
.
To change the details of a contact
1. Select a contact.
2. Select Edit > Edit contact, or tap the tab.
3. Change the desired information. When applicable, select
from the drop-down menus.
•
To change a picture, select the picture and select Replace
image.
To delete a contact
•
To remove a picture, select the picture and select Delete image.
1. Select the contact.
Contacts
105
This is the Internet version of the user’s guide. © Print only for private use.
2. Select Contacts > Delete contact.
4. Follow the instructions, for example, select a folder or a
sending method.
To create or edit a contact on the SIM card
5. Tap Done or Yes to confirm the action.
1. Select SIM from the Folders menu.
To search for an entry containing specific text
1. Select Contacts > Find.
2. Create or edit the contact as described above.
All options are, however, not available for the SIM card
contacts.
2. Enter the text string you wish to search for.
4. When the search is complete, all results will be displayed.
Managing contacts
You can use Contacts manager to move contacts between the
folders, send contacts as a Vcard to another device, or to delete
them. You can also send or delete contacts on the SIM card with
Note Searching is not case sensitive and you do not have to
enter an entire word to locate a matching entry.
the Contacts manager
.
Copying contacts to and from the SIM card
You can also copy information between the contacts list and the
SIM card.
See ‘Sending and receiving items’ on page 30 for information
about how to receive contacts from another device.
To move, send or delete a contact
To copy contacts from the SIM card
1. Select Contacts > Contacts manager
.
1. Select SIM in the folders menu to the right in the menu bar.
2. Select the contacts you want to manage.
2. Select Edit > Copy all to Contacts for copying all SIM entries
or
(If required, change folder from the Folders menu. Selecting
All will show all the contacts from all the folders except the
SIM. Clicking the Select all check box will select all the
contacts in the current folder.)
Tap a SIM entry to open it and select Edit > Copy to Contacts to
copy the selected SIM entry.
3. Select Send / Move / Delete
.
To copy contacts to the SIM card
1. Select a contact.
106
Contacts
This is the Internet version of the user’s guide. © Print only for private use.
2. Select Edit > Copy to SIM card
.
Preferences
3. If the contact has multiple phone numbers, each number will
be created as a separate entry in the SIM phone book.
Contacts tab
4. Select Done
.
To sort the contact list and show the preferred phone number
1. Select Edit > Preferences
.
Making an owner card
2. Select the desired sorting option (first name, last name or
You can create an electronic business card, containing your
contact details, including notes and a photo. You can then send
this card to another device.
company) and tap Done.
3. If you want a phone number to be shown next to the name in
list view, select Show preferred phone number
.
If no preferred number has been set up for the contact, the
To create your owner card
1. Select Contacts > New and enter your details.
4. Select Done.
2. Select Contacts > Set as my card
.
Tip You can also create an owner card by viewing the detail
view of a contact and selecting the menu option Set as my card
To change the preferred phone number
.
1. Select a contact.
2. Select Edit > Edit contact
.
To send your owner card
3. Select Edit > Show in list.
4. Select the number to be shown from the list.
5. Tap Done.
1. Open the list view, and then select Contacts > Send my card
.
2. Send the card using Send as
.
Read more about sending items in ‘Sending and receiving items’
on page 30.
Note If no number appears, ensure that Show preferred phone
number is checked in preferences.
To view or edit your owner card
•
Select Contacts > View my card.
Contacts
107
This is the Internet version of the user’s guide. © Print only for private use.
Calendar
The Calendar function helps you to keep track of appointments
and events, and you can also set reminder alarms for the entries.
Creating calendar entries
A reminder is denoted by a
.
To create a new calendar entry
1. Select Calendar > New and enter a short description of the
Different views
entry. This is the description you see in the calendar.
You can see your Calendar entries in three views with the flip
open: Day, Week and Month. With the flip closed you will see
the Day view.
2. Tap Unfiled (the folder menu) in the menu bar and select a
folder to store the entry in.
3. Continue to enter information for the items on the detail
page.
To change view in flip open
–
Type - Specify if the entry is an appointment, reminder or
all day event.
•
•
•
•
Tap
Tap
Tap
Tap
to display the Day view.
to display the Week view.
–
Date - Select the date to get a calendar where you can set a
date for the entry.
to display the Month view.
to navigate to the present day in the displayed view.
–
–
Time - Set start and end time for the entry.
If you tap an entry in week view, the subject and time for that
entry are shown.
Location - Specify a location or select a location you have
used before.
–
–
Alarm - Select the check box if you want your P910i to
alert you about the entry with a sound. Select the time and
date that appears for your settings.
To navigate backwards or forwards in the current view
Tap the left and right arrows in the button bar at the bottom of
the screen. You can also rotate the Jog Dial.
Repeat - Specify if you want to repeat the entry or not.
Read more about this below.
To navigate to a specific date in the current view
Tap the day, week or month heading at the top of the display to
show a calendar pop-up in which you can select a specific date.
108
Calendar
This is the Internet version of the user’s guide. © Print only for private use.
–
Private - Select the check box to prevent the item from
being viewed by others than yourself if you synchronize
your calendar with, for example, your PC.
Managing calendar entries
To find a certain entry
4. Select the note page tab to write a note for this entry.
5. Select to save and close the entry.
1. Select Calendar > Find
.
2. Enter a search word in the menu that appears.
3. Select where to search (Everywhere, Future, Past).
4. Select Find. A result list is then displayed.
5. Select an entry on the result list to open it.
You should delete old entries regularly to release memory.
To create re-occurring entries
1. When the entry is open, select Repeat
.
– Set repeating to Daily Monthly by date, Monthly by
,
Weekly
,
To delete an entry
day
,
Yearly by date or Yearly by day.
Open the entry and select Calendar > Delete entry
.
–
–
Interval - Specify how often the event will happen, for
example, by selecting Weekly and Interval 2 means that the
event will go off every two weeks on the specified day.
A deleted entry may be restored with Edit > Undo delete
.
To delete all entries in a period of time
Forever/Until - Set the time limit for the alarm or select
forever.
1. Select Calendar > Remove entries
.
2. Select the time period and select Done. All entries from that
2. Select days - Weekly repeated events can be set to occur twice
or more in a week. For example, eating lunch with a friend
Tuesday and Friday every week.
time period are deleted from the Calendar.
Note Repeated entries will not be deleted.
Note You cannot repeat All Day Events
To copy, cut or paste an entry
1. Open the entry.
To edit an entry
2. Select Edit > Copy entry/ Cut entry.
3. Go to the day where you want to place the entry.
4. Select Paste entry.
1. Open the entry by tapping it in the calendar.
2. Make the changes in accordance with the instructions above.
Calendar
109
This is the Internet version of the user’s guide. © Print only for private use.
To move a Calendar item to Tasks
2. Select the General tab, and fill in the required details.
1. Open the entry and select Calendar > Move to Tasks
.
To customize the alarm settings
1. Select Edit > Preferences.
2. Select the Alarm tab.
2. The entry is moved, not copied.
If you move an entry with an alarm, the alarm will also sound in
Tasks.
Now, you can change the Alarm precedes event by setting - the
To cut or copy Calendar entries to the Tasks application
1. Open the entry and select Edit > Cut entry or Copy entry.
2. Open Tasks.
length of time before an entry that the alarm goes off.
To assign colours to your entries using the folders
1. In Calendar, select the folders menu to the right in the menu
3. Select Edit > Paste entry.
bar and select Edit folders.
2. Select a folder and select Edit or create a new folder by
selecting Add
3. Select the colour box and select colour for that folder and
select Done
.
Sending and receiving calendar
entries
.
You can send and receive calendar entries using Send as. See
Entries in a folder with a specific colour appear in that colour in
Day and Week views (but not in Month view) so that you can
see the pattern of events in your diary. Reminders appear as
whatever the folder colour.
‘Sending and receiving items’ on page 30.
Preferences
You can customize the calendar views and alarm settings to suit
your own needs.
Saving changes
If you leave Calendar while editing an entry, your changes will
be saved automatically.
To customize the calendar view, General tab
1. Select Edit > Preferences.
110
Calendar
This is the Internet version of the user’s guide. © Print only for private use.
Tasks
With the Tasks function you can make a list of things you need
to do. The folders help you to separate different types of
activities.
–
–
–
Completed – Select the check box when the task is
done.This can also be done directly in the Tasks list.
Priority – Set a priority for the task. You can sort the tasks
by priority.
You can move entries between Tasks and the Calendar, which is
useful when you come to schedule a Tasks entry. You can also
send an entry via text message, infrared, Bluetooth wireless
technology, multimedia message or email.
Due date – Select the check box to set a deadline for the
task. Select the date that appears to get a calendar where
you can set a due date.
–
–
Alarm – Select the check box if you want your P910i to
alert you about the task. Select the time and date that
appears for your settings.
Creating task entries
Private – Select the check box to prevent the task from
being visible by others, when synchronized with shared
calendars or tasks in other devices, for example your PC.
The Tasks list shows a short description of the task. Select a task
to see its full information.
A task entry consists of two pages. One detail page where you
set the properties for the task, and one page where you can add
notes.
4. Select the note page tab to write a note for this entry.
5. Select to save and close the task.
Note Delete will delete the whole task entry.
To create a new task entry
1. Select Tasks > New and enter a short description of the task.
To edit an entry
This is the description you see in the task list.
1. Open the entry by tapping it in the Tasks list.
2. Make the changes according to the instructions above.
2. Select Unfiled (the folder menu) in the menu bar and select a
folder to store the task in.
3. Continue to enter information for the items on the detail
page.
Tasks
111
This is the Internet version of the user’s guide. © Print only for private use.
To restore a deleted entry
Managing task entries
Select Edit > Undo delete.
To open an existing entry
Select the entry in the Tasks list.
To delete all completed entries
In your Tasks list, select Tasks > Delete completed
.
To mark an entry as completed
Note When you delete All Completed Entries, they are deleted
Select the check box to the left of the entry in the Tasks list.
permanently and cannot be restored.
To sort the entries
Select Edit > Sort on priority or Sort on date
.
Moving task entries
To find a certain entry
To move an entry to the Calendar
1. Select Tasks > Find
.
Open the entry and select Tasks > Move to Calendar. The entry is
moved, not copied.
2. Enter a search word.
3. Select in which folder to search or use the default value
To copy a task entry to Calendar
All folders
.
1. Open the entry and select Edit > Copy entry
.
4. Select Find. A result list is then displayed.
2. Open Calendar.
5. Select an entry on the result list to open it.
3. Enter the day you wish the task to appear.
4. Select Edit > Paste entry in Calendar.
To make a copy of an entry or paste an entry
1. Open a task and select Edit > Copy entry.
2. In list view, select Edit > Paste entry.
Note If you move or copy an entry to the Calendar, it will lose
the priority it was assigned in Tasks.
If you do not set a due date for the task entry, the current date
will be used for the new Calendar entry. If you move or copy an
entry with an alarm, the alarm will also be moved to the
Calendar.
To delete an entry
Open the entry in the task list and then select Delete
.
112
Tasks
This is the Internet version of the user’s guide. © Print only for private use.
Sending and receiving task
entries
You can send and receive task entries using Send as. See
‘Sending and receiving items’ on page 30.
Preferences
Select Edit > Preferences to change the settings. The following
settings are available.
–
Display due dates – Select whether or not to display them in
the Tasks list.
–
Display completed – Select whether or not to display them
in the Tasks list. This will not delete the completed tasks.
Tasks
113
This is the Internet version of the user’s guide. © Print only for private use.
Jotter
The Jotter works as a notebook where you can write notes and
draw pictures. The folders help you to separate different types of
notes.
To edit a note while working with it
•
For text, select Edit > Revert.
The text returns to its original state. All changes are lost.
A Jotter entry consists of two pages. One text page and one
drawing page. With the flip closed, you can read and edit your
notes, but you cannot view or edit pictures.
•
For sketches, select Edit > Undo.
This choice removes your last pen stroke. If you change your
mind, select Edit > Redo
.
When opening Jotter you will see a list of entered notes, with the
first words of each text note. Select a note to see its full
information or edit it.
To create a new note from text or sketches copied from another
application
Open the list of notes and select Edit > Paste
.
Note If you paste a sketch over an existing sketch, the existing
sketch will be deleted.
Creating and editing notes
Create a note with the flip closed (text only)
To create a new note
1. Select Applications >Jotter with the flip closed.
1. Open Jotter and select Jotter >New.
The new note will automatically start as a text note. Select
2. If you have previous notes stored, these will now be listed.
Use the Jog Dial to select a previous note in order to open it.
to get bold text and
to create a bullet list.
A
3. Press
if you want to create a new note. Select New.
2. Select Unfiled (the folder menu) in the menu bar and select a
Insert your text by using the keypad.
folder to store the jotter in.
3. Select the drawing page tab to draw a sketch for this note.
4. Select
to save and close the note.
114
Jotter
This is the Internet version of the user’s guide. © Print only for private use.
Edit a note with the flip closed
Managing notes
1. Select Applications >Jotter with the flip closed.
2. Use the Jog Dial to select a previous note in order to open it.
3. Press . Select Edit. Insert your text using the keypad.
To delete a note
1. Select the note in the notes list.
The note opens.
2. Select Jotter > Delete note
.
Drawing pictures
You can draw with different
nib widths and colours. The
Sending and receiving notes
main window is the ‘paper’
where you can draw with
your stylus in the same way
as you draw with an ordinary
pen.
Jotter Edit
Unfiled
You can send and receive notes using Send as. See ‘Sending and
receiving items’ on page 30.
Note Selecting Send as SMS will send the text only.
Select
to change colour.
to change the
Select
virtual nib.
Select
to activate the
eraser. Tap the eraser again to
re-activate the pen.
All jotter files (both text and
drawings) are automatically
stored in the P910i. The list
view will be presented to you as soon as you start the Jotter
application.
Jotter
115
This is the Internet version of the user’s guide. © Print only for private use.
TOOLS
Sound recorder
In Sound recorder you can record and listen to your own sound
recordings. You can also send your recordings to other devices
via Bluetooth wireless technology, infrared communication,
email or multimedia message, and use a sound recording as a
ring signal.
3. Select
to finish the recording.
Key functions
Select... To...
start recording a sound.
Each memo is identified by the date and time it was recorded
and by its position in the list of sound recordings.
listen to the current sound recording.
stop the current sound recording.
go to the previous sound recording in the list.
go to the next sound recording in the list.
Making sound recordings
To record and save a sound recording
1. Select
>
> New.
To delete a sound recording
1. Select a sound recording you want to delete.
A new sound recording is created.
2. Select and start recording after the beep.
3. Select to finish the recording.
2. Select Delete recording > Yes
.
The new sound recording is automatically saved in the list of
sound recordings with the current date and time.
To append to the end of a previous sound recording
1. Select the required recording.
2. Select
and start recording after the beep.
116
Sound recorder
This is the Internet version of the user’s guide. © Print only for private use.
Using sound recordings as ring
signals
You can set a sound recording as a ring signal.Your sound
recordings will appear in the list of sounds that can be selected
as ring signals. They will take the form voicenote and a number,
for example voicenote1470
.
To set a sound recording as a ring signal see ‘Sounds and alerts’
on page 149.
You can send Sound recorder recordings via Bluetooth wireless
technology, infrared communication, email or as a multimedia
message.
To send a sound recording
1. Select Sound recorder > Send as
.
2. Select how you want to send the sound recording. See ‘To
send an item using Send as’ on page 30 for more
information.
Note All other sound media on your P910i is handled via the
Music player application. You can send sound items from
Music player and all received sound items are played using Music
player
.
Sound recorder
117
This is the Internet version of the user’s guide. © Print only for private use.
Calculator
The Calculator is a standard 12-digit calculator. You can add,
subtract, multiply, divide, calculate square roots and
Key functions
mr
m+
m-
Tap once to retrieve a value from the memory and enter it
into the screen.
Tap twice to clear the memory.
percentages. It also has a memory function.
To use the calculator
Tap once to store an entered value in the memory.
If you have already entered a value in the memory, tap once
to add the value on the screen to the value in the memory.
1. Select
>
.
2. Enter the calculations by tapping the digits.
Tap once to subtract the entered value from the value in the
memory. The memory is adjusted but not displayed.
All calculations, except percentage calculations, are performed
in the order they are entered, for example: 5+5x5=50, not 30.
Tap once to delete the last digit you entered.
Tap once to reset the screen to 0.
Percentage calculations are performed backwards. To calculate,
for example, 10% of 50, enter 50x10%. The result is displayed
when you tap the %-key.
C
You can copy and paste values to and from other applications by
selecting Calculator > Copy or Paste
.
Values stored in the memory are retained while using other
applications.
118
Calculator
This is the Internet version of the user’s guide. © Print only for private use.
Time
The time and date are always displayed on the flip closed
standby screen. You can customize the display of times and
dates throughout your P910i. You can set your current location
and another location of your choice. It is also possible to set
three different alarms.
Use the am/pm box to switch between am and pm. (This is
only possible if you use the 12-hour time format.) Confirm
by tapping outside the time picker.
6. Select Done
.
Format
Setting time and date
You can specify how you want the time and date to be displayed
on the screen, and if you want to use the 12- or 24-hour time
format.
To set the current time and date
1. Select
>
.
To set the time and date display format
2. Tap the clock, or select Time > Set time & date, to view the
1. Select
>
.
current time and date settings.
2. Tap the clock, or select Time > Set time & date, to view the
3. Tap the Date box, then use the arrows to set the current year
and month. Then select the current day.
current time and date settings.
3. Select Format
.
4. Tap Summertime, then select the check box next to the zone
that currently has summer time and tap Done. This is only
required if you are currently in a country/region with summer
time.
4. Tap the Date Format box and choose a format.
5. Tap the Date Separator box and choose a separator.
6. Select a Time format
.
5. Tap the time box, then tap the upper half of the hour or
minute box to increase the number displayed, or the lower
half to decrease the number.
7. Tap the Time separator box and choose a separator.
8. Select Done
.
Time
119
This is the Internet version of the user’s guide. © Print only for private use.
To set the locations
Specifying workdays
1. Select
>
.
You can specify what days you work, if, for example, you want
to set an alarm that sounds only on workdays. You can also
specify the first day of your week to customize the display of
both Week and Month views in Calendar.
2. Tap Time > Set location
.
3. Tap the Current Country/Region box and select the country/
region you are in at that moment.
4. Tap the Current City box and select the city you are in at that
moment. If the city you are in is not listed, select the city
closest to you.
To specify your workdays
1. Select
>
.
2. Tap the clock, or select Time > Set time & date, to view the
5. Tap the Other Country/Region box and choose a country/
region.
current time and date settings.
3. Select Workdays
.
6. Tap the Other City box and choose a city.
4. Select the check boxes next to the days you normally work.
7. Tap Done
.
5. Select First day of week and choose a day.
6. Tap Done
.
Setting number formats
You can choose how you want the measurements and numbers
in your P910i to be displayed in all your applications. Distances
can be displayed using the imperial or the metric system and
different punctuation marks can be used as separators.
Setting locations
Specify the country/region and city you are currently in. The
city you select will be displayed next to the clock in Time.
If you are away from home, for example travelling in another
country/region, it can be useful to know what the time is in your
home country/region as well as the country/region you are in.
The city you select as Other City will be displayed below the
clock in Time.
To set the number details
1. Select
>
.
2. Select Time > Set location
.
3. Select Numbers
.
120
Time
This is the Internet version of the user’s guide. © Print only for private use.
4. Choose separators and symbol positions from the drop-down
lists. You can tap the keyboard icon to find currency
symbols.
To set a new alarm
1. Select
>
.
2. Select one of the alarm slots.
5. Tap Done
.
3. Select Time and choose at what time you want the alarm to go
off. Confirm by tapping outside the time picker.
4. Select When and choose how often you want the alarm to go
Setting alarms
off:
You can set up to three different alarms in your P910i. You can
choose to activate one of the preset alarms, or set a new alarm
with your own definitions.
–
Once The alarm will go off once only, at a time more than
24 hours from now but within the next eight days.
–
–
–
–
Next 24 hours Within the next 24 hours.
Daily Every day at the specified time.
You can choose to set a silent alarm, where only a message is
displayed when it goes off, or you can set a sound alert.
Workdays Every workday at the specified time.
Weekly Every week at the specified time.
Alarms requires that the P910i is turned on. If you want to get
alarms in an environment where radio transmitters are not
allowed, you can set the P910i to flight mode, see ‘Flight mode’
on page 49.
5. Select Alarm sound and choose a sound.
6. Select Message and choose a preset message or write a new
one.
Note If you have connected a stereo headset to the P910i, the
alarm will only be heard in the headset.
7. Tap Done
.
8. Make sure the check box next to the alarm is selected.
To activate an existing alarm
When the alarm goes off, select Snooze to postpone the alarm for
five minutes or Silence to turn off the alarm sound. To turn off
•
Select the check box in the alarm slot.
status bar on the screen.
is displayed on the
the alarm completely, tap Done
.
Time
121
This is the Internet version of the user’s guide. © Print only for private use.
Your phone contains the following viewers and editors:
Common viewer and editor
functions
•
•
•
•
Quickword™ – view and edit Microsoft Word documents
Quicksheet™ – view and edit Microsoft Excel documents
Quickpoint™ – view Microsoft Power Point presentations
Pdf+ – view Adobe™ Acrobat™ (PDF) documents
To open a document from an email or Internet page
Select the document link. The document viewer opens the
document in the detail view.
When the flip is open there are two views:
To open a document from the list view
An alphabetical list of files, for selecting a file to
view.
List view
1. Select the Application launcher icon
2. Select, for example, the Quickword icon
3. If required, change folder.
.
The contents of a file, for viewing and editing the
file.
Detail view
.
The applications are also started automatically when selecting
and opening attachments to messages.
4. Scroll to the desired file and select the file name.
5. The document is shown in the detail view.
To save documents to another location (internal or on the
Memory Stick) you use folders, see ‘Folders’ on page 28.
The functions available differ depending on the document type.
Common functions are similar between the applications and are
described first.
Please read the help texts for detailed information about the
viewers and editors.
122
Viewers and editors – Quickoffice
This is the Internet version of the user’s guide. © Print only for private use.
Quickword
Quicksheet
To save and copy the document to a specific folder
To save and copy the document to a specific folder
1. In the list view, select Quickword > Copy
.
1. In the list view, select Quicksheet > Copy
.
2. Select where to save the document, and select Copy
.
2. Select where to save the document, and select Copy
.
To edit a document
To edit a document
In the detail view, from the toolbar at the bottom of the screen,
The first time you edit a document (in native Microsoft Excel
format) transferred to your P910i, you have to rename it. When
you select OK, your P910i copies the document with the new
name.
select the edit icon
.
The first time you edit a document (in native Microsoft Word
format) transferred to your P910i, you have to rename it. When
you select OK, your P910i copies the document with the new
name.
At the bottom of the screen you find the spreadsheet character
input field, and icons for performing the most common
spreadsheet functions.
In the toolbar you find icons for performing the most common
word-processing functions.
When you have edited the document and leave it, your P910i
saves it automatically.
When you have finished editing and leave the document, your
P910i saves it automatically.
Viewers and editors – Quickoffice
123
This is the Internet version of the user’s guide. © Print only for private use.
Show previous slide.
Quickpoint
Store large presentations on the Memory Stick to leave the
phone memory available for running applications. Animations
and embedded objects will be shown as plain text.
Expand the current slide (in Outline view).
Collapse the current slide (in Outline view).
Zoom in (in Slide view).
To handle a presentation file
Zoom out (in Slide view).
1. Highlight the presentation file in List view
.
2. Select the required command from the Quickpoint menu.
Viewing a presentation
The presentation opens by default in Outline view where the
outline of the whole presentation appears. You can shift to Notes
view where you can see the notes to each slide, or to Slide view
to show the slides.
Navigate through the presentation with the stylus and the Jog
Dial. Change the type of viewing from the toolbar at the bottom
of the screen. The commands are also available from the menus:
Outline view. Show the slide headings and the sub texts.
Notes view. Show notes added to a slide.
Slide view. Show the presentation.
Switch between fullscreen view and normal view.
Show next slide.
124
Viewers and editors – Quickoffice
This is the Internet version of the user’s guide. © Print only for private use.
Wrap the document, that is the text is displayed in a format
which fits the screen. Images and line drawings are not visible
in this view.
Pdf+
To save and copy a received document
Unwrap the document.
1. In the detail view, from the toolbar at the bottom of the
Search.
screen, select the save icon
.
2. Name the document, select where to save it, and select Save
.
Search for links.
To move a document
In the detail view, from the folder menu, select a new folder.
To view a document
Change the type of viewing from the toolbar at the bottom of the
screen:
Bookmarks view. Select a heading to go to the corresponding
page. You can also use the Jog Dial to select a bookmark, and
then use the icon below to go to the corresponding page.
Go to the selected page.
Return to the page view.
Go to previous page.
Go to next page.
Full screen.
To return to the normal view, select the icon and de-select
Full screen.
Viewers and editors – Quickoffice
125
This is the Internet version of the user’s guide. © Print only for private use.
File manager
With the File manager you can view, rename, copy, move, and
delete files and folders on the P910i. You can also add folders,
send files and rename and format the Memory Stick.
also format the Memory Stick, see ‘Formatting a Memory Stick’
on page 23.
To move within the folder structure
Initially, the root view is shown, with the sub folders:
•
•
To move up in the hierarchy - tap the top folder.
•
•
•
Audio, where all audio files are stored.
To view the contents of a folder or a file - tap the top folder.
Folders are opened in the file manager while other files are
opened in the applicable application.
Document, where different document files are stored.
Image, where all images, pictures as well as drawings, are
stored.
To add a folder
•
•
Other, where all files not applicable for the other folders are
stored.
1. Select File > New folder
.
2. Type a folder name and tap Done
.
Video, where all video clips are stored.
Using the folder menu, you can select between the internal
storage and the external storage, that is, the Memory Stick. The
path to the selected folder is shown at the top of the window.
To copy or move one or more folders or files
1. Select the folders or files to handle.
2. Select the required activity from the File menu.
Note There is an important distinction between External media
3. Select the destination and tap Done
.
and External other External other lets you view folders that have
.
been placed on the Memory Stick by other equipment, such as
digital cameras. This is the only place where these folders can
be viewed.
From the file manager it is possible to reach the Control Panel
storage manager, see ‘Storage manager’ on page 169. You can
126
File manager
This is the Internet version of the user’s guide. © Print only for private use.
To delete one or more folders or files
Note Only empty folders can be deleted.
1. Select the folders or files to delete.
2. Select File > Delete
.
3. Tap Delete
.
To change properties for one or more folders or files
1. Select the folders or files to change.
2. Select File > Properties
.
3. Change the properties, as required.
4. Tap Done
.
File manager
127
This is the Internet version of the user’s guide. © Print only for private use.
Online services
Online services is a customized service offered by a network
i
operator. This function is network- or subscription-dependent.
Online services provides a mechanism that allows applications
that exist on the SIM to interact and operate with the P910i. It
may provide services ranging from weather forecasts to the
latest information from the stock market.
Online service are placed on your SIM card by your operator.
Note Contact your operator to find out which services are
available for your account.
Note If this service is available on your SIM, the Online
services application will appear in the application list under a
name defined by the SIM provider. However, the icon used to
represent the Online services application
will not change.
i
128
Online services
This is the Internet version of the user’s guide. © Print only for private use.
ADVANCED FUNCTIONS
PC Suite and Content and Application
Installation of the Sony Ericsson PC Suite
The Sony Ericsson PC Suite programs can be used with
Windows ME, 98, 2000 and XP.
Sony Ericsson PC Suite
The Sony Ericsson PC Suite CD delivered with your P910i
contains a set of useful applications:
When inserting the CD in the PC, a start menu is automatically
shown. Select language and then start the Sony Ericsson PC Suite
Setup. Follow the instructions in the installation wizard.
•
Synchronization – Synchronization of Calendar, Notes,
Contacts and Tasks against Microsoft Outlook, Lotus Notes
and Lotus Organizer.
•
•
Backup and Restore – Make safety copies of your data via
SyncStation.
If the start menu is not automatically shown, use the Run
command in the Windows Start menu to start Start.exe from your
CD drive.
File Manager – Transfer files (images, documents, music) via
Windows® Explorer between your P910i and PC.
By default the Sony Ericsson PC Suite is accessed from
•
•
Install software – Install applications in the P910i.
Start menu > Programs > Sony Ericsson > P910i.
Download Language – Change the language in the P910i.
Additional languages are downloaded from
www.SonyEricsson.com/support
The Setup application also can be used later to add or delete
components.
You can download the latest PC Suite software from
www.SonyEricsson.com/support
•
•
Dial-Up Networking Wizard – Wizard for GPRS and HSCSD
settings for using your P910i as a modem.
Drivers – Drivers for modem and the USB cable connected
SyncStation.
Refer to the online help for each specific application.
PC Suite and Content and Application
129
This is the Internet version of the user’s guide. © Print only for private use.
Content and Application CD
The Multimedia for P910i CD contains a number of applications
and files to be installed in, or downloaded to, your P910i and
used together with its applications.
•
•
•
•
•
•
•
Games
Audio files
Pictures
Video clips
MMS templates
MMS editor
Image editor
Opening the Content and Application CD
When you insert the CD in the PC, a start menu opens
automatically. Select an item from the menu and follow the
instructions on the PC screen.
If the start menu is not automatically shown, use the Run
command in the Windows Start menu to start CDBrowser.exe from
your CD drive.
130
PC Suite and Content and Application
This is the Internet version of the user’s guide. © Print only for private use.
Installing applications
It is possible to install new applications in your P910i. These
applications can be obtained in several ways, for example:
Applications which are not approved by Sony Ericsson are not
guaranteed to work correctly or securely, and users install them
at their own risk. Product failures caused by applications not
approved or made for Sony Ericsson will not be covered by your
warranty.
•
•
•
•
•
from the Internet.
from a CD.
from a Memory Stick.
as an email attachment.
from other devices.
Installing applications on your
P910i
There are two types of installation files for applications:
•
SIS (Symbian Standard Installation) made for P910i or other
Sony Ericsson devices.
Installation file security
Installation files in SIS format are typically used for installation
of Epoc or PersonalJava™ applications or other content into the
P910i file system.The vendor who prepared the SIS file decides
where in the file system the various content of the SIS file will
be installed. This means that you need to decide if you trust that
the SIS file does not contain harmful content. If you are certain
of the origin of the SIS file you can take an installation decision
based on what you know about that vendor. Your P910i supports
cryptographic verification of vendor identity.
•
MIDP JAR (Mobile Information Device Profile Java
Archive).
Note SIS and JAR files are installation packages containing one
or more files.
Programs made for the Sony Ericsson P800 and P900 series can
also be used in the P910i.
This chapter also applies to other types of software to install, for
example, system components and add-ons.
During installation the P910i verifies a digital signature and
certificate in the SIS file against a root certificate in the phone.
Successful verification means that you can trust the origin of the
Applications from developers outside Sony Ericsson, so-called
third-party developers, might be possible to install in the P910i.
Installing applications
131
This is the Internet version of the user’s guide. © Print only for private use.
SIS file and that the content has not been modified after it was
created. If the SIS file does not contain a digital signature you
will be given a warning about the problem but you can still
decide to proceed with the installation at your own risk. In
general, it is recommended that you install only from SIS files
where the vendor identity and file integrity can be verified.
4. Select target drive (phone memory or Memory Stick).
Download to the P910i begins.
5. Installation starts when the download is complete.
From the P910i
Program packages, for example, games, can also be downloaded
to your P910i from the Internet or from a Memory Stick. When
downloading a file from the Internet, the installation will start
automatically when the file is completely downloaded to your
P910i. The procedure below describes installation of application
packages transferred to the P910i but not yet installed.
Note Installation of uncertified applications may cause your
system to crash and all your data will then be lost.
MIDP applications run in a protected environment with no
access to sensitive information so no signatures are required for
MIDP JAR files.
See ‘To download and upload files, for example, applications’
on page 80 for information about how to download files from
the Internet.
From a PC
Sony Ericsson PC Suite must be installed in your PC and the
P910i must be connected to the PC via SyncStation, infrared, or
Bluetooth wireless technology in order to install applications
from your PC.
Installing applications in the P910i
1. Select
.
2. From the menu, select Applications > Install
.
Installing applications from your PC
3. Select the software from the list.
1. Connect your P910i to the PC via SyncStation, infrared or
Bluetooth wireless technology. When connected, an icon is
shown in the status area to the right in the taskbar on the PC.
4. Select Install. If the software is certified, an information
dialog will be shown with the name of the software, version
and supplier. Select Install again.
2. Start the PC software Install Software and select the
application (.sis file) to install. You can also open a .sis file
directly in your PC.
5. Now, depending on the software, you may be prompted to
replace a previous installation, select language, memory
location and select other installation options.
3. Confirm to install the application in the P910i.
132
Installing applications
This is the Internet version of the user’s guide. © Print only for private use.
SyncStation and an Internet-connected PC (preferably via
broadband).
Removing applications from
your P910i
To update the P910i software
It is sometimes necessary to remove installed applications and
1. Connect the SyncStation to your PC and place your P910i
user data to free up memory.
into it.
Removing applications in the P910i
1. Select
2. Visit Sony Ericsson P910i support site on
www.SonyEricsson.com/support
.
3. Select Sony Ericsson Update Service and follow the
instructions on how to proceed with the update sequence.
2. From the menu, select Applications > Uninstall
.
3. Select the application to be uninstalled.
Answer Yes when you are asked if you want to install the Sony
Ericsson Update Service PC program.
4. Select Uninstall
5. Tap Yes to confirm.
6. Select Done
.
Note User data can be lost when the software is updated.
Always back up the phone before updating.
.
Tip See also ‘Master reset’ on page 168 and ‘Storage manager’
on page 169 in Control Panel for more options regarding removal
of applications and user data.
Some removed applications can be reinstalled from the Sony
Ericsson PC Suite CD or the Content and Application CD.
Sony Ericsson Update Service
With Sony Ericsson Update Service you can keep your phone
updated with the latest P910i software. When a new software
version is available, you can download and install it using the
Installing applications
133
This is the Internet version of the user’s guide. © Print only for private use.
Connecting to other devices
Your P910i can be connected to other devices with similar
interfaces such as PCs, other P910is and handheld computers.
PC connectivity software
Your P910i is delivered with a CD, Sony Ericsson PC Suite.
This software must be installed in the PC you want to connect
to. See ‘Installing applications’ on page 131 for more
information. You do not need to install the Sony Ericsson PC
Suite if you only want to perform beaming with the PC or use a
cordless headset.
The connection can be made via:
•
Bluetooth wireless technology (not together with
Windows 98)
•
•
Cable
Infrared (IrDA)
Note To save the battery, turn off Bluetooth wireless technology
and infrared when you do not need them.
Connection via SyncStation
Note Install the Sony Ericsson PC Suite before you connect the
SyncStation.
Depending on the type of connection you have chosen, you can
use your P910i to perform various tasks, for example:
Connect the SyncStation to your PC with the USB cable. A
wizard helps you to install the USB cable the first time. The
Sony Ericsson PC Suite CD contains the necessary software.
•
Sending and receiving files via infrared or Bluetooth wireless
technology – ‘beaming’.
•
Making Backup/Restore and Synchronization of your data
and file transfer (cable, infrared and Bluetooth wireless
technology).
Put your P910i in the SyncStation. A new wizard starts which
helps you to connect your P910i if this is the first time.
appears in the status area to the right on the taskbar when
the P910i is connected.
You can even use your P910i as a modem for Dial-Up
Networking using cable, infrared and Bluetooth wireless
technology. With Bluetooth wireless technology, you can for
example, connect a cordless headset.
When connecting via cable, the P910i can be set in PC Connect
mode or Modem mode. The setting is made in Control panel >
Connections > Cable, see ‘Cable’ on page 154.
134
Connecting to other devices
This is the Internet version of the user’s guide. © Print only for private use.
Set the P910i in PC connect mode for
3. Set the port state to On or On for 10 minutes.
You can also change the infrared port state with the flip closed,
in the Connections application.
•
•
•
Synchronization.
Installation of software.
Backup and restore.
To activate the infrared port on the PC
1. Right click
in the status area to the right on the taskbar.
Set the P910i in Modem mode when using
2. Select Properties
•
•
P910i as a modem.
3. Select the Infrared check box
4. Click Close
Dial-up network wizard.
.
You should disable the USB cable connection in these two
cases. In your PC select Start > Settings > Control Panel > Phone
Monitor Options > COM Ports and disable the COM port to
which the cable is connected.
Note Clear the Infrared check box when ready.
Send and receive
You can send items via the infrared port, beam, in any
application if there is a Send as command. To send, select
Infrared. If you receive a beamed item, a dialog box appears with
Connection via Infrared port
three options: Delete
opens the associated application which shows the item; Done
saves it in the Beamed folder in Messages
,
View or Done. Delete deletes the item; View
When connecting via the infrared port, make sure that both
devices are placed within one metre from each other and that the
infrared ports have a free line of sight between them.
.
Both your P910i and the device you connect to must have their
infrared ports activated before communication can begin.
To activate the infrared port on the P910i
1. Go to Control panel > Connections > Infrared
.
2. Set the P910i to PC connect or Modem as required.
Connecting to other devices
135
This is the Internet version of the user’s guide. © Print only for private use.
set if your P910i should be Visible by other devices or not. See
‘Bluetooth’ on page 153 for more information on Bluetooth
Connection via Bluetooth
wireless technology settings.
wireless technology
You can connect your P910i to other products equipped with
Bluetooth wireless technology, for example PCs, car handsfree
devices, or other mobile phones, and exchange data. Since
Bluetooth wireless technology is radio-based, there does not
have to be a free line of sight between transmitting and receiving
devices. This means that your P910i can stay in your pocket
while communicating. However, items between transmitting and
receiving devices might weaken the signal.
The Bluetooth wireless technology operation mode can also be
changed with the flip closed, through the Connections
application. When the Bluetooth wireless technology is
activated,
appears on the screen and the left indicator light
on top of your P910i flashes blue.
Pairing
To let your P910i initiate pairing with another device, such as
a headset
Connection to another device can be made within a range of up
to 10 metres. Obstructions between the transmitting devices will
have an effect on the performance. For all tasks, except
1. In Control panel > Connections> Bluetooth > Settings, set Bluetooth
beaming, it is necessary that you first set up a permanent and
trusted relationship between your P910i and the other device.
This process is called pairing (other documentation may refer to
it as bonding). The paired devices are remembered by your
P910i even after you have turned it off so you do not need to
repeat the process for every connection with those devices. The
reason for pairing is to simplify future connections and to make
them secure – only paired devices can connect to your P910i.
to On. Make sure Visible to other devices is selected.
2. Set the other device to be on or discoverable.
3. In the Devices tab, tap Add. Your P910i searches for all
devices in the vicinity and lists them.
– All enabled devices that are visible to others within range,
are shown with their name and icon. You can use Show: to
restrict the list to one category (only PC, for example).
– Paired devices that are within range are shown with
regular text.
Activating Bluetooth wireless technology
Activate Bluetooth wireless technology on your P910i in Control
panel > Connections > Bluetooth > Settings. Set Bluetooth to On, and
– Non-paired devices that are within range are shown with
their names in italics.
136
Connecting to other devices
This is the Internet version of the user’s guide. © Print only for private use.
– Devices that are within range but unknown are shown
with a preset name.
To let a headphone initiate pairing with your P910i
1. Check that the device you want to pair with your P910i:
– Is on and within range.
4. Select the device you want your P910i to pair with, and enter
a passcode when asked for it. When the passcode is accepted,
the pairing process is complete, see ‘Passcodes’ on page 138.
– Has its Bluetooth function activated and that it is in
visible mode.
5. If in the future you want to allow a paired device to connect
to your P910i without you explicitly approving each
connection, you should select Control panel > Connections >
Bluetooth > Devices, then select a device and the check box
2. In Control panel > Connections > Bluetooth > Settings, set
Bluetooth to On
.
3. Follow the headphone’s manual to initiate pairing on the
headphone.
Allow to connect without confirmation
.
4. In the Devices tab tap Add. Your P910i searches for all devices
in the vicinity and lists them.
To let another device initiate pairing with your P910i
5. When asked for a passcode, enter the headphone’s passcode
on your P910i.
1. In Control panel > Connections > Bluetooth > Settings, set
Bluetooth to On
.
6. If in the future you want to allow the headphone to connect to
your P910i without you explicitly approving each
2. Follow the other device’s manual to initiate pairing.
3. When asked for a passcode, enter the same on both devices.
connection, you should select Control panel > Connections >
Bluetooth > Devices, select the headphone and the check box
4. If in the future you want to allow a paired device to connect
to your P910i without you explicitly approving each
Allow to connect without confirmation
.
connection you should select Control panel > Connections >
Bluetooth > Devices, select a device and the check box Allow to
To remove a paired device from your P910i
Select a device in the list and select Remove
connect without confirmation
.
.
Tip You can change the name of a paired device. When you pair
with other Bluetooth wireless technology enabled phones, it is
very useful to include the user's name as part of the device
name. This will make it very easy to beam information to the
desired recipients.
Connecting to other devices
137
This is the Internet version of the user’s guide. © Print only for private use.
Shared folder, a request dialog is shown, where you can Accept or
Reject the transfer.
Passcodes
Passcodes ensure that the device you pair with really is the
device you think it is. A passcode is a set of numbers and/or
letters (at least four characters) that you agree to exchange with
the owner of the other device. Simply agree a passcode with the
other user and each enter the same code into both devices when
asked for it. The actual code is up to you; the important thing is
that you both enter the same code. Accessories like headsets
often have a default passcode, usually ‘0000’, see the specific
user guide.
Send and receive
You can send items via Bluetooth wireless technology in any
application if there is a Send as command. To send, select
Bluetooth. If you receive an item via Bluetooth wireless
technology, a dialog box appears with three options: Delete
Delete deletes the item; View opens the associated
application which shows the item; Done saves it in the Beamed
folder in Messages
,
View
or Done
.
.
Bluetooth share
You can make it possible for other users to transfer items from
your P910i. To make an item accessible, select Send as >
Bluetooth Shared. The item is then copied to the Shared folder,
accessible by other users. When a user requests to access your
138
Connecting to other devices
This is the Internet version of the user’s guide. © Print only for private use.
Synchronization and backup
With Sony Ericsson PC Suite installed in your PC, your P910i
can synchronize with the following PC applications, also called
Personal Information Managers (PIMs):
Note If you have imported SIM phone book entries into Contacts
in your P910i, these entries will not be synchronized with the
corresponding entries in your PC when synchronizing your
P910i and PC. You will instead get duplicates in your P910i.
•
•
•
•
Lotus® Organizer® 5 & 6, 6.5
Lotus Notes® 5.0, 6
Microsoft Outlook 98, 2000, 2002, 2003
Microsoft Windows Address Book
Local synchronization
Bluetooth
Synchronization is divided into local and remote. Local
synchronization is performed directly to a connected PC while
remote synchronization is done over the air with a remote server
in, for example, a corporate network.
Irda
The manual describes the easiest way to perform the tasks but
you can also carry out most of them by selecting Start > Programs
> Sony Ericsson > P910i in the PC and then select the desired
command.
Cable
Local synchronization is done with either cable, infrared or
Bluetooth wireless technology. The functionality is the same.
Refer to the online help find in Help in the menu bar in the PC
software to get more information about synchronization and
backup. You can also take a look on Global support area at
www.SonyEricsson.com
Email, Contacts, Calendar, Tasks, and Jotter notes (only text)
can be synchronized locally.
Synchronization and backup
139
This is the Internet version of the user’s guide. © Print only for private use.
To make a manual synchronization
Local synchronization settings
1. Connect your P910i via cable, infrared or Bluetooth wireless
technology. For more information, see ‘Connecting to other
devices’ on page 134.
Local synchronization is initiated from the PC and all settings
are made in the P910i PC software (included on the Sony
Ericsson PC Suite CD).
2. In the PC, click on
on the PC taskbar and select
The easiest way to synchronize is to set the Synchronization to
automatically make a synchronization every time your P910i is
connected.
Synchronise
.
The synchronization starts.
3. After a short time, the PC application you want to
synchronize with might ask you to allow the P910i access to
it. Answer Yes and the synchronization continues.
To make the synchronization settings
In the PC, click on
in the status area to the right in the
taskbar on the PC and select Sync Station Settings
.
A dialog appears where you can make the synchronization
settings. Click Help in the dialog to get more information about
the settings.
Making a local synchronization
To make an automatic synchronization
1. Connect your P910i via SyncStation, infrared or Bluetooth
wireless technology. For more information, see ‘Connecting
to other devices’ on page 134.
2. Synchronization starts automatically.
3. After a short time, the PC application you want to
synchronize with might ask you to allow the P910i access to
it. Answer Yes and the synchronization continues.
140
Synchronization and backup
This is the Internet version of the user’s guide. © Print only for private use.
Remote synchronization settings
Remote synchronization
Remote synchronization takes place over the air and is the ideal
To configure the remote synchronization server
way to keep the P910i up-to-date while on the move. Using
GPRS, the P910i can be continuously connected to the remote
synchronization server.
In Applications, select
Remote Sync > Edit > Preferences and fill
in the following parameters:
– Server address
– Username
– Password
GPRS, HSCSD
or CSD
You might also need to fill in whether to use transport login
under the Protocol tab. Contact your corporate information
services help desk or your service provider for information on
these parameters.
PIM Application
Sync Server
Firewall
You also need to have at least one configured Internet account
that remote sync can use to connect, see ‘Internet accounts’ on
page 155.
Internet/Intranet
To select items to synchronize
1. In Remote Sync, select one item in the list you want to be
synchronized.
Synchronization services may be offered by mobile operators,
third-party service providers and as added capability to
corporate PIM applications.
2. Select the Enable task check box.
3. Fill in the Task name or leave default.
4. Fill in the Server database (contact your corporate
Contacts, Calendar, and Tasks can be synchronized remotely.
information services help desk or your service provider).
5. The item you selected to be synchronized is now above the
divider in the list. (Disabled items are below the divider.)
Synchronization and backup
141
This is the Internet version of the user’s guide. © Print only for private use.
6. Repeat for other items.
Note Backup and restore does not work via infrared or
Bluetooth wireless technology.
Making a remote synchronization
Performing a backup
Open Applications > Remote Sync and tap the Sync button.
To make a backup
When ready, the Task status column shows today's date for all
successfully synchronized items.
1. Turn on your P910i and connect it to the PC via cable.
2. In the PC, click on
on the PC taskbar and select Back up
and restore
.
Backing up data
3. Select your P910i in the menu that appears. Several P910is
can be backed up to the same PC.
You can use the P910i Backup and Restore PC software to back up
the contents stored in your P910i to your computer. Keeping
backups of your P910i contents on your computer means that
you have a separate copy of the contents of the P910i, which can
be restored into the P910i. Backups should be made on a regular
basis. See the online help for P910i Backup and Restore for more
information on how to use the application.
4. Select Backup and choose what to back up: P910i and/or
Memory Stick.
5. Click Yes and follow the instructions in the PC and in the
P910i.
6. The backup is complete.
Note All user data will be deleted when the P910i software is
upgraded by a Service Partner. Always back up your data before
handing over the P910i for upgrading, so that you can restore it
afterwards
Preconditions
The Sony Ericsson PC Suite must be installed in the PC and the
P910i must be connected to the PC via cable.
142
Synchronization and backup
This is the Internet version of the user’s guide. © Print only for private use.
Restoring data
Lost data or accidentally deleted information in your P910i can
be restored from an earlier backup. A backup from the phone
can only be restored to the phone, and a backup from a Memory
Stick can only be restored to a Memory Stick.
To restore a backup
1. Turn on your P910i and connect it to the PC via cable.
2. In the PC, click on
on the PC taskbar and select Back up
and restore
.
3. Select your P910i in the menu that appears. Several P910is
can be backed up to the same PC.
4. Select one of the backups in the list of previously saved
backups and click Restore
.
5. Click Yes and follow the instructions in the PC and in the
P910i.
6. The restore is complete.
Note Everything in your P910i will be overwritten by the
chosen backup. Once you have clicked Yes to start the restore,
you cannot cancel the procedure.
Note If you have used your Secure Tokens (Secure Access files)
since you made your backup, you must reconfigure these. If you
restore another P910i, you must reconfigure your Secure
Tokens. For more information see ‘Secure tokens’ on page 168.
Synchronization and backup
143
This is the Internet version of the user’s guide. © Print only for private use.
SETTINGS
Personalizing your P910i
There are a number of ways you can give your P910i a personal
Setting a background picture
touch and change its settings to suit your requirements.
You can change the background image (wallpaper) for the
standby screen in
Control panel > Device > Display. You can use
any image stored internally or on a Memory Stick.
Themes
Tip More background images can be found on the Multimedia
P910i CD, delivered with your P910i.
Themes control the colour of screen and text, the icons, and the
background picture, the wallpaper. Sound themes control the
notification alerts. Some themes are pre-loaded in the P910i.
Extra themes can be found on the Content and Application CD
where you also can use the themes editor to modify the themes
or create new ones.
downloading, MMS, beaming using Bluetooth or infrared, or
transferring them using a cable from your PC.
Background picture images are 208 x 144 pixels and the picture
can be seen in the standby screen. (Any chosen picture will be
scaled to fit the screen). The images can be JPEG, GIF, BMP,
WBMP, MBM or PNG format.
To change the theme, select
see ‘Themes’ on page 151
Control panel > Device > Themes,
.
Changing your application
shortcuts
Setting the light intensity
You can set the maximum and minimum display light intensity.
This is useful to save the battery or protect your night sight
when driving a car. See “Power tab” on page 148.
You can change and rearrange the five shortcuts to applications,
shown in the standby screen when the flip is closed, and the five
first shortcuts in the Application picker area in flip open (not the
Application launcher
be hidden, if you wish.
). The flip closed shortcuts can even
144
Personalizing your P910i
This is the Internet version of the user’s guide. © Print only for private use.
If your network operator provides a CLI (Calling Line Identity)
Setting a screen saver
service, your P910i can display the contact’s picture together
You can set a screen saver picture to be displayed after a period
with the other information when an incoming call is received
of inactivity. See ‘Display’ on page 147. Keylock and device
with a CLI matching that contact (not all numbers can be
lock may be used in combination with the screen saver. When
displayed). The contact’s picture is also displayed when you
make a call to that person.
activate keys and/or enter the device lock code.
To choose the contact’s picture size
The images can be JPEG, GIF (including animated), BMP,
WBMP, MBM or PNG format. Image format for the screen
saver is 208 x 320 pixels.
1. Select
Phone > Edit >Preferences > Incoming call picture.
box.
Note Using animated GIF uses more power.
3. Tap Done
.
Adding images to your
Contacts
Ring signals
Your P910i can play both iMelody format and polyphonic ring
signals in WAV, AU, AMR, MIDI, RMF, and MP3 sound file
formats. When you choose a ring signal, your P910i will scan
the internal and Memory Stick storage and present you with a
list of ring signals that are in these formats. Recordings you
have made using Sound Recorder can also be selected.
You can store a picture with
each entry in Contacts. See
11:03
‘Creating and editing
contacts’ on page 104.
J
+
ohn
S
4613244500
mith
(h)
Pictures are easily taken
using the CommuniCorder
(see ‘CommuniCorder’ on
page 59) though of course
other images can be used.
Ring signals can be added by downloading from the Internet,
beaming using infrared or Bluetooth wireless technology file
transfer from a PC and by using a Memory Stick. Extra ring
signals can be found on the Content and Application CD. You
E
nd call
Personalizing your P910i
145
This is the Internet version of the user’s guide. © Print only for private use.
can add as many ring signals as desired, subject only to
available storage space.
Tasks
Set a sound for reminder alarms. See ‘Preferences’
on page 113.
Messages
Set a different sound for each type of message as
notification of a new message:
See ‘Sounds and alerts’ on page 149.
Tip Sound Recorder recordings are listed as voicenote and a
number, for example voicenote1470.
A ring signal may be selected for an entry in Contacts, so that
the caller can be identified by the ring signal that is played. See
will be played using the Multimedia volume setting. The ring
volume setting will not effect the sound volume.
Note The mobile network must provide the CLI (Calling Line
Identity) of the caller to enable the contact to be identified.
You may change the default ring signal that is played in all other
cases. To do this, see ‘Sounds and alerts’ on page 149.
Note If your P910i finds that you have renamed, moved or
deleted a ring signal, it will play the default instead.
Alarm tones and sound
notification
You can choose different sounds for alarms and notifications in
these applications:
Time
See ‘Setting alarms’ on page 121.
Calendar
Set a sound for reminder alerts, see ‘Preferences’
on page 110).
146
Personalizing your P910i
This is the Internet version of the user’s guide. © Print only for private use.
Control panel
The Control Panel is the location for all the main settings on
your P910i that are system-wide and affect more than one
application. This is the main place to go to initially set up your
P910i, and to change settings at any point thereafter. To access
and ‘Navigation’ on page 17. You can change the five shortcuts
shown. If you feel that the flip closed shortcuts obscure your
background, you can choose to have them hidden when you do
not need them.
it, select
Applications >
Control panel.
To change an application shortcut
Tip You can find settings that apply to a single application in
the Preferences menu of the application, for example: Phone > Edit
> Preferences, CommuniCorder > CommuniCorder > Preferences,
Internet > Edit > Preferences.
1. In the Application shortcuts dialog, select the Flip open or Flip
closed tab depending on the shortcuts you intend to change.
2. Select the icon you wish to change. The name of the
application is shown in the Set application pick list.
The sections below describe the settings available for each of
the default items in the Control panel.
3. Choose the application you want to replace it with from the
list.
To hide the flip closed application shortcuts when your P910i
is inactive
Clear the Shortcuts always displayed check box.
The Device tab
The device tab contains settings related to the behaviour of your
P910i device itself.
Display
Use the Display settings to control the screen and power
functions of your P910i.
Application shortcuts
Use this dialog to configure the application shortcuts shown in
the flip closed standby view, and the Application picker
shortcuts in the flip open mode. See ‘Standby view’ on page 15
Control panel
147
This is the Internet version of the user’s guide. © Print only for private use.
screen ensures that the correct item is activated. Tap Calibrate
screen and follow the instructions.
Wallpaper tab
You can set a picture to be the background, wallpaper, for the
standby screen.
Power tab
1. Select if the flip closed or flip open wallpaper should be
You can set if the power save should switch off the screen, blank
changed.
the screen or show a clock on the screen. You can also set the
power save time between 1 and 30 minutes.
2. Tap the image showing the current picture.
3. Browse to see picture files available on your P910i.
If you set times for both screen saver and power saver, the
4. Select a picture and tap Select
.
power saver time will commence after the screen saver is
displayed.
Read more about background in ‘Personalizing your P910i’ on
page 144.
You can set the screen light settings for handheld use and car
use.
Screen tab
You can set a picture to be the screen saver.
Auto
Light switches on when you tap the screen, press a key, or
receive an incoming call
On
Off
Light is always on
Light is always off
1. Select a picture for the screen saver.
2. Set the activation time for the screen saver.
If you select the Screen saver device lock check box the device
lock will activate when the delay runs out. Read more about the
device lock in ‘Device lock’ on page 38.
Select Adjust brightness to set to set the normal (max) and
dimmed (min) light intensity for handheld use and car use. The
Brightness box works as a slider.
If you set a time for the Automatic Input Lock, the keyboard lock
will activate when the time runs out. Read more about the
automatic keylock in ‘Automatic keylock’ on page 39.
Occasionally you may find that you tap one item (for example a
button or menu option) but another is activated. Calibrating the
148
Control panel
This is the Internet version of the user’s guide. © Print only for private use.
On the Location tab
Flight mode
•
Set Current country/region and Current city to your current
In flight mode the radio function is turned off. You cannot make
and receive calls but most of the other functions in the P910i are
available.
location.
•
Set Other country/region and Other city to an alternative
location (for example your home location if you are abroad).
Use these settings to turn the flight mode on or off and also to
activate the Power menu. When activated, the Power menu will
ask you if you want to start the P910i in normal mode or flight
mode each time you turn on the P910i. Also, when you press the
On/Off button when your P910i is on, the Power menu will ask
you if you want to turn off the P910i, or switch to another mode.
If the city you want is not listed, select another city in the
desired time zone.
On the Numbers tab
Set the decimal separator and thousands separator you desire.
To activate the Power menu
Select the Prompt me... check box and tap Done
.
Locks
Locks contains options for activating the locks on the device,
the SIM card and the keys on the keypad, and for changing the
lock codes, see ‘P910i locks’ on page 37.
To cancel the selection of Power menu
Clear the Prompt me... check box and tap Done
.
International
Sounds and alerts
Use these settings to set the locations shown in
Time, as well
Use these settings to control sounds and alerts of your P910i.
as the units for distances, numerical separators, and how
currency values should be shown.There are two tabs: Location
and Numbers.
•
•
•
Calls tab – Sets ring tones and volume.
Messages tab – Sets notification alerts for messages.
Other tab – Sets button and screen clicks, reminders, alarms,
and other notifications.
Control panel
149
This is the Internet version of the user’s guide. © Print only for private use.
You can choose to use any sound recording or audio file. You can
Calls tab
select ring signals that are stored on your phone or on a Memory
These settings set incoming call alerts. For more information see
Stick. If the selected file is later deleted or moved, the Default
‘Ring signals’ on page 145.
Melody will be played instead.
You may personalize the ring melodies further for individual
contacts, see ‘To change the details of a contact’ on page 105.
To listen to the selected ringtone or alert
1. Tap the icon to listen to the signal.
•
•
Ring (voice) – Select a ring signal for incoming voice calls.
2. Tap again to stop playback.
Ring (voice) line 2 – Select a ring signal for incoming voice
calls.
To change the default ring tone or alert
•
•
Ring (data) – Select a ring signal for incoming data calls.
1. Tap the drop-down menu.
2. Select Default Melody for the P910i default or Find sound to
Ring volume – Set the preferred sound level for handheld,
handsfree and car use.
select a new one.
3. If required, change folder.
4. Select the required sound
•
Increasing ring – Select the checkbox to use increasing ring
signals. This disables the other volume settings.
5. Tap
and
to preview the sound.
Messages tab
6. Tap Select to set this sound.
These settings set messaging alerts.
Warning! The volume may be uncomfortably loud at the
higher volume levels if the phone is close to your ear. Exposure
to excessive volume may damage hearing.
•
Display notification message – Select the check box to receive
notification of a received message.
•
•
•
SMS – Select an alert for received SMS messages.
Email – Select an alert for received Email messages.
MMS – Select an alert for received MMS messages.
To set vibrating alert, silent mode, speakerphone, or mute the
microphone
•
Tap the volume icon on the status bar.
150
Control panel
This is the Internet version of the user’s guide. © Print only for private use.
•
•
Area info – Select an alert for received area information
messages.
Use the settings on the Primary
set methods for entering text in your P910i.
,
Alternative and Flip Closed tabs to
Auto setup – Select an alert for auto setup messages.
Primary
The method that you select here is activated
automatically when you need to enter text into your
P910i.
Other tab
Alternative
Flip closed
These settings set button and screen clicks, reminders, alarms,
and other notifications.
tap
at the bottom of the screen.
The method that you select here is activated when you
need to enter text with the flip closed.
•
Button click – Select the sound used when you press a key on
the keypad.
If you load other text input software, select it and adjust its
settings here.
•
•
Screen tap – Select the sound used when you tap the screen.
Key press – Select the sound used when you press a key on
the keyboard on the flips inside.
Themes
•
•
Reminder – Select an alert to be played for reminders.
You can set the look of the user interface by changing the theme.
Voice messages – Select an alert to be played for voice
messages.
•
•
To change the theme, select a theme from the list. The picture
shows the flip closed standby background. Tap Select
.
•
Default alarm – Select the default alarm sound.
To listen to a theme sound, select the event from the drop-
down list. Tap the icon to play. Tap again to stop playback.
Text input
•
•
To send a theme, select the theme and tap Send as
.
There are several standard ways of entering text in your P910i.
See ‘Entering text with the flip closed’ on page 32 and ‘Entering
text with the flip open’ on page 33.
To delete a theme, select the theme and tap Delete
.
Control panel
151
This is the Internet version of the user’s guide. © Print only for private use.
2. Select the am/pm box.
Time & date
This is only possible if you use the 12-hour time format.
Adjusting the time and date here sets these throughout your
P910i.
3. Confirm by tapping outside the time picker.
If the locations you have set under
Control panel >
The dialog has three tabs. You can set:
International are in a country/region that currently has
summertime (daylight saving time), you can adjust the time and
date.
Time & date
The current time and date. Here you can also turn
Summertime (daylight saving time) on or off for your
location.
Format
Specify how you want the time and date to be displayed
on the screen.
To turn daylight saving time on
1. On the Time &date tab, select Summertime, select the check
Workdays
Specify the days in your working week.
boxes for the zones that currently have daylight saving time.
2. Select Done
.
Note These settings are also available in the
Time
application.
Format tab
Time & date tab
You can specify how you want the time and date to be displayed
on the screen, and if you want to use the 12-hour (am/pm) or 24-
hour time format.
To set the current date
1. On the Time & date tab, select the date. A calendar view opens.
To set the time and date display format
1. Select Date format and choose a format.
2. Select Date separator and choose a separator.
Tap the arrows to set the current year and month.
2. Select the current date.
To set the current time
3. Select a Time format
4. Select Time separator choose a separator.
5. Select Done
.
1. On the Time & date tab, select the time. Select the upper half of
the hour or minute box to increase the number displayed, or
the lower half to decrease the number.
.
152
Control panel
This is the Internet version of the user’s guide. © Print only for private use.
connecting to other devices using Bluetooth wireless technology
in ‘Connection via Bluetooth wireless technology’ on page 136.
Workdays tab
You can specify what days you work, if, for example, you want
to set an alarm that sounds only on workdays. You can also
specify the first day of your week to customize the display of
both Week and Month views in Calendar.
Bluetooth settings are shown on two tabs:
Settings
Devices
• A device name for your P910i.
• Bluetooth on or off.
• If it should be visible to other Bluetooth equipped
devices.
User greeting
A list of all the Bluetooth-enabled devices that your
P910i is paired (bonded) with.
Your P910i can show a user greeting on the standby screen when
you turn it on. Use this dialog to turn this function on or off. You
can define your own user greeting text (up to 32 characters).
• To change the name of a device, and to allow for
connection without confirmation, select the name in
the list.
• To remove a device from the list, select the name and
select Remove
• To locate other devices in the vicinity, and add them to
the list, tap Add
.
.
The Connections tab
The connections tab contains settings related to how your P910i
communicates with other devices.
Tip You will probably find that the preset name of your P910i,
and of devices you pair it with, are not very meaningful or easily
recognisable. It is a good idea to change these names to
something more useful. The name you choose for your P910i
appears on any devices you pair it with.
Bluetooth
Bluetooth wireless technology uses radio waves to enable
wireless connections between your P910i and other Bluetooth-
enabled devices. This method of linking works well at a range of
up to 10 metres. Obstructions between the transmitting devices
will have an effect on the performance. Read more about
See ‘Pairing’ on page 136 for instructions on how to connect to
another device using Bluetooth wireless technology.
Control panel
153
This is the Internet version of the user’s guide. © Print only for private use.
•
Set the baud rate, parity, number of stop bits, character length
and type of flow control required for the connection. When
connecting your P910i via the SyncStation to a USB port on
your PC, use the following (default) settings:
Security
On the Settings tab you can set the Bluetooth security related
settings of your P910i.
Bluetooth on
All Bluetooth wireless technology functionality from
your P910i works. Visibility according to the Visible
to other devices setting.
Set Bluetooth to Off if you do not use Bluetooth, it
will decrease battery drain. Bluetooth will
automatically switch on if you use Send as >
Bluetooth from the applications
Baud rate
115200
None
1
8
Parity
Stop bits
Character length
Flow control
CTS/RTS
Tip You can set the cable connection mode when the flip is
closed by selecting
Visible to
other devices
Selected: All Bluetooth wireless technology
functionality from your P910i works.
Cleared: All Bluetooth wireless technology
functionality from your P910i works but you cannot
receive beamed items, and other devices cannot
initiate pairing with your P910i.
Applications >
Connections >
Cable.
GSM Networks
This option lets you choose what network to use when you are
outside your operator’s area. Choose if you want to search for a
new network or use a preferred one. You can also make a list of
preferred networks.
Cable
Use Cable to set the cable connection mode and the connection
parameters used when communicating through your P910i's
cable port.
•
•
•
Search mode – Select between automatic or manual search for
a network.
•
Set the cable connection mode. Please note that you must set
the mode to Modem when using the P910i as a modem and
when using the DUN (Dial-up Networking) Wizard.
Select network – Tap the button to get a list of available
networks.
New search – Tap the button to search for available networks.
154
Control panel
This is the Internet version of the user’s guide. © Print only for private use.
•
Preferred list – Show the networks that your P910i will search
for when you are outside your home network.
P910i automatically uses to access the Internet. You need to set
up an Internet account before you can:
Note Your operator may not allow you to access all available
networks.
•
•
Access Web pages and download multimedia messages.
Set up an email account to send and receive email messages.
To add a network to the preferred list
Tip A simple way of setting up an Internet account is to ask
your service provider to send you a message that contains the
required information to create an account automatically on your
P910i.
1. Tap Add network
.
2. Select a network from the displayed list.
3. Select a position in the Preferred list and tap Done
.
Dial-Up
:
For Dial-Up (CSD, Circuit Switched Data)
connections, you are charged for the length of
time that you are connected to the Internet.
Infrared
Use this setting to control the state of the infrared port of your
P910i.
High-Speed Dial-Up
:
For High-Speed Dial-Up (HSCSD, High Speed
Circuit Switched Data) connections you are
charged for the length of time you are
Set the infrared status to PC connect or Modem, as required.
connected but you can increase the connection
speed so that information is transferred faster.
You can set it Off On or On for 10 minutes. Read more about
connecting to other devices using infrared in ‘Connection via
Infrared port’ on page 135.
,
The service must be included in your
subscription and billing rates from your
network operator may increase as you increase
the connection speed.
Internet accounts
GPRS
:
For a GPRS connection you are charged for the
amount of information you view, download, or
send.
You access the Internet using an Internet Service Provider (ISP),
who supplies you with account details including: a username, a
password, and the phone number or Web site address that your
The dialog has two tabs: Accounts and Other.
Control panel
155
This is the Internet version of the user’s guide. © Print only for private use.
Accounts tab
New
GPRS account
The Internet accounts dialog lists all the Internet accounts that
have been set up on your P910i.
For some accounts you may need to make advanced settings,
provided by your ISP. Select Advanced and enter settings on the
tabs as described below
You can add a New account to the list and Edit or Delete an
existing account.
GPRS Advanced tabs
Server
User name and password
If you want to select an Internet account every time you connect
to the Internet, select the Show connection dialog check box. This
may be useful if you use different Internet accounts for
Normally, you do not have to enter a username and
password when you connect to a GPRS account.
However, some service providers may require you to
enter these details.
Internet and
Messages.
If you select the Username and password required
check box, but do not enter a username and
password, you will be prompted to enter these when
the P910i connects.
Whenever you connect to the Internet, your Preferred account is
the account that your P910i prompts you to use.
To create a new Internet account
Address
1. On the Accounts tab, select New
.
Enter the Internet address of your access point. The
address is supplied by your service provider.
2. Give the account a name. This will be the name shown in
your list of accounts. (In dialogs that appear while a
connection is being established the text -GPRS is
automatically added to names of GPRS accounts.)
3. Choose the Connection type for the type of account that you
want to create, GPRS or Dial-Up.
4. Continue entering settings as required. These will differ
depending on the type of account: GPRS, Dial-Up or High-
Speed Dial-Up:
156
Control panel
This is the Internet version of the user’s guide. © Print only for private use.
GPRS Advanced tabs
GPRS Advanced tabs
Log in
The settings on this tab deal with IP and DNS
addresses.
Authentication is used by some network operators to
identify the mobile phone connecting to their GPRS
network. There are different methods, or protocols,
for doing this.
The DNS address uniquely identifies your Internet
Service Provider (ISP)'s computers, which your
P910i uses to connect to the Internet. Your P910i can
normally fetch these addresses automatically from
most ISPs.
If, after setting up an Internet account, you cannot
connect to the Internet and you suspect these
addresses are incorrect, ask your ISP for their
primary and secondary DNS addresses.
An IP address consists of four 3-digit boxes and valid
input is between 000 and 255 in each box.
Normal: PAP (Password Authentication Protocol).
The user's username and password are transmitted
over the network in an unencrypted form.
Secure: CHAP (Challenge Handshake
Authentication Protocol). The user's username and
password are never transmitted over the network.
None: No authentication is required by the network
operator.
QoS
Check with your network operator before changing
any of the QoS (Quality of Service) settings.
Proxy
Other
A proxy server is a computer connected between
your P910i and the computer you communicate with.
This arrangement can be used for connections to
Remote Sync servers, or within a company network.
If this setting is needed, your company's Information
Services department or Remote Sync provider must
give you instructions.
The settings Precedence Delay, Peak rate, and Mean
,
rate are all by default set to Subscribed, which means
that your operators default QoS (Quality of Service)
values will apply. Reliability is set as Class 3 by
default.
New
Dial-Up or High-Speed Dial-Up account
If your ISP supports Point to Point Protocol (PPP)
extensions, you can select the Enable PPP extensions
check box. PPP extensions allow your P910i to
provide features such as encryption, which increases
the security of your Internet connection.
Your Internet Service Provider (ISP) supplies you with your User
name, your Password, and their Phone number, which your P910i
dials to connect to the Internet. If you have a High-Speed Dial-
Up account with your network operator you can increase the
speed of your connection by making settings on the Speed tab
under Advanced
.
Control panel
157
This is the Internet version of the user’s guide. © Print only for private use.
Tip To avoid having to change the phone number when you
travel abroad: enter the international dialling prefix (for
example '+') and the appropriate country code for your ISP.
Dial-Up and High-Speed Dial-Up Advanced tabs
Select the check box Post connect terminal if:
• The login script of the account that you are setting up
requires that you input certain information or you will
need to respond to prompts from the Internet accounts.
You are connecting to a Dial-Up account that uses Secure
Access generated by a separate smart card or password
generator.
For some accounts you may also need to make advanced
settings.
Select Advanced and enter settings on the tabs as described
below
Proxy
Speed
For an explanation of these settings, see Proxy in the
‘GPRS Advanced tabs’ on page 156.
Dial-Up and High-Speed Dial-Up Advanced tabs
Log in
The settings on this tab deal with IP and DNS addresses.
For an explanation of these settings, see Log in in the
‘GPRS Advanced tabs’ on page 156.
You can only increase the speed of your connection if you
have a High-Speed Dial-Up account with your network
operator.
Script
As an alternative to entering your username and password
to access the Internet you may need to use a login script
stored on your P910i. Although uncommon, scripts may
be required by your Internet Service Provider (ISP).
Select the Use login script check box and enter the script
Secure
To enable secure access for this Internet account you
must link it to a vendor-associated Secure Token in this
dialog:
1. Select the Enable secure access check box.
To create or delete Secure Tokens on your P910i, select
text in the Script editor
.
Control panel > Other >Secure tokens
.
If you select the check box Plain text authentication
(required by some ISPs), the security of your connection
will decrease during the connection process. Once you
are connected, the security of your connection will be
restored.
2. Select the vendor and token names of the Secure Token
that you want to link to this account from the drop-down
lists.
Other
If your Internet Service Provider (ISP) supports Point to
Point Protocol (PPP) extensions, you can select the
Enable PPP extensions check box. PPP extensions allow
your P910i to provide features such as encryption, which
increases the security of your Internet connection.
158
Control panel
This is the Internet version of the user’s guide. © Print only for private use.
To edit an Internet account
not receive incoming calls. As soon as the transfer stops
(Icon: ) incoming calls will be accepted.
1. On the Accounts tab, select the account in the list.
2. Select Edit
3. Change your settings as desired.
4. Select Done
.
Setting the Preferred mode lets you choose how you want to use
your P910i:
.
•
Select GPRS only if you do not want to be disturbed by
incoming phone calls while browsing the Web. All incoming
voice (and GSM data) calls are rejected. If you disconnect
from the Internet, incoming calls can be received. Outgoing
calls are possible, except during data transfer. This mode is
useful if you are using sensitive Internet services, such as
banking.
Note If you change the Connection type, all account data for that
account will be deleted.
To delete an Internet account
1. On the Accounts tab, select the account in the list.
2. Select Delete
.
•
•
If you select GSM only, your P910i will not be connected to
the GPRS network. If you choose to download email or
browse the Web, your P910i will connect to GPRS only as
long as is needed for the data connection.
3. Select Done
.
Other tab
If you select Automatic, your P910i will let you answer
incoming GSM calls while having normal GPRS
functionality. A GPRS data connection will be temporarily
interrupted by a voice call.
You can use the Dial-up timeout and GPRS timeout settings to set up
your P910i to disconnect automatically from the Internet, if you
are not using it. The connection is broken after the period you
specify has lapsed.
Preferred mode (bearer preference)
Please note that your P910i can be used for either voice (or
GSM data) calls or transferring GPRS data, but not both at the
same time. It may, however, still be connected to GPRS. As an
Messaging accounts
The
Messages application can handle many different types
of messages, but you must first set up accounts and make
settings as described below.
example, during GPRS data transfer (Icon:
) your P910i may
Control panel
159
This is the Internet version of the user’s guide. © Print only for private use.
The Messaging accounts dialog has four tabs, one for each type
of messaging account:
Email tab
The Email tab shows a list of the email accounts on your
P910i.You can add a New account to the list and Edit or Delete an
existing account.
Email
You can have any number of email accounts. To receive
and send email, you must first set up an Internet account
(if one is not already set up). See ‘Internet accounts’ on
page 155.
You can choose one of your email accounts as Preferred. This
will be the email account that your P910i uses when you use
Send as to send an entry as email directly from one of your P910i
applications
SMS
MMS
You can only have one SMS (Short Message Service)
account.The settings on this tab also apply to EMS
(Extended Message Service) messages.
You can only have one MMS (Multimedia Messaging
Service) account. To receive MMS messages you must
up). See‘Internet accounts’ on page 155.
To create a new email account
1. On the Email tab, select New.
2. Enter the following settings on the tabs:
Area
You can only have one Area info account. The number of
Area Information channels that you can subscribe to is
limited by the space on your SIM.
Email account basic tab settings
Account name
Your name
This is the name you give to your email account.
This name appears on your outgoing email
messages.
Tip A simple way of setting up an email or multimedia message
account is to ask your service provider to send you a message
that contains the required information to create an account
automatically on your P910i.
Email address
Your Internet Service Provider (ISP) supplies you
with your email address.
Connection type
Select POP3 or IMAP. POP3 is most common.
IMAP makes it possible to subscribe to server
based folders.
Read more about the different types of messages in ‘Messages’
on page 87.
Internet account
Select the Internet account to access your email
messages.
160
Control panel
This is the Internet version of the user’s guide. © Print only for private use.
Email account Inbox tab settings
Email account Outbox tab settings
Username
Password
Incoming server
address
Outgoing server
address
Your Internet Service Provider (ISP) supplies you
with your username, your password, and its
incoming server address, which identifies the
computer where your incoming email messages
are stored.
Your Internet Service Provider (ISP) supplies you
with its Outgoing server address, which identifies
the computer through which your outgoing email
messages are sent.
Use SMTP
Some SMTP servers might also require
authentication
Open in full
screen
Select to open messages in full screen portrait
view.
authentication when sending email. In that case,
select the check box Use SMTP authentication and
enter your User name and Password
.
Download
If you want to limit the data traffic, you can choose
to receive just Just headers (the sender, subject,
and date only) or set a size limit (if a message is
larger than the Smaller than limit, only the headers
are downloaded). You can download the complete
message later. You can also set a limit to the total
number of messages held in your email account at
any one time.
Use Inbox login
details
If the SMTP server accepts using your Inbox login
information for authentication, select the check
box Use Inbox login details
.
Email account Advanced tab settings
Secure
connection
Your Internet Service Provider (ISP) will tell you
whether you can use either a Secure connection or
Secure password authentication
.
Schedule
Select Schedule to schedule an automatic
download of your incoming email messages.
Messages that are waiting in your Outbox will not
be sent at the same time.
Outgoing mail
port
Normally 25. Do not change unless your ISP
instructs you to.
Use MIME
encoding
MIME encoding is a standard that allows non-
textual information (for example graphics) and
accented characters to be sent in email messages.
If you should not wish to Use MIME encoding
,
clear the check box.
Control panel
161
This is the Internet version of the user’s guide. © Print only for private use.
SMS tab
Email account Advanced tab settings
Incoming mail
port
Normally 110. Do not change unless your ISP
instructs you to.
Use these settings to set up text messaging and EMS
messaging:
Secure
password
authentication
A secure connection means that all information
(including your username, password, and all
messages) is encrypted to maximize security while
you are connected to the Internet. In contrast,
secure password authentication means that only
your password is encrypted.
Messaging accounts SMS tab settings
SMS Service
centre address
The SMS Service centre address is the phone
number where your text messages are stored. It is
normally imported from the SIM card but if that
fails, your network operator can provide you with
the service centre address.
To edit an email account
Character Set
Your network operator may also specify the
Character set
.
1. On the Email tab, select the account in the list.
Messages stored
for
You can set a time limit after which text messages
are deleted from the network by choosing a value
in the Messages stored for list.
2. Select Edit
3. Change your settings as desired.
4. Select Done
.
.
Connection type
Specify if you prefer to use GPRS or GSM
connection as directed by your network operator.
To delete an email account
Tip If you send and receive text messages in several countries,
you can avoid having to change the service centre address when
you travel abroad by entering the international dialling prefix
(for example '+') and the appropriate country code for your
network operator.
1. On the Email tab, select the account in the list.
2. Select Delete
3. Select Yes
.
.
162
Control panel
This is the Internet version of the user’s guide. © Print only for private use.
Advanced settings
Select Advanced to make settings about how your P910i will
send and receive multimedia messages.
MMS tab
Use these settings to set up multimedia messaging:
Messaging accounts MMS tab settings
MMS Advanced settings tabs
Service centre
address
The MMS Service centre address is the URL to the
server on which your multimedia messages are
stored. Your MMS service provider or your network
operator can provide you with the service centre
address.
Send
The values you give these settings will be default for all
multimedia messages that you send. You can of course
choose other values for an individual message in Messages.
You can set the Validity period for your messages, that is,
how long they should be available to the receiver.
Maximum is the default.
WAP account
Automatic
Specify which of your configured WAP accounts
you wish to use.
• WAP accounts are created in Control panel >
Connections > WAP accounts
You can give your messages a Priority of Low
,
Normal
(default) or High
.
You can set Content alert for the multimedia messages you
create to help you check content.
Select between:
•
•
•
Off - automatic download is off, you will receive
notifications of incoming messages and have to
download them manually.
Home only - messages are downloaded
automatically when you are connected to your
home network.
If you select Warning, a warning message is displayed
whenever you add a non-conformant item to a multimedia
message. You have the option to send anyway. If you select
Restricted, the message will not be sent in the situation
described above. Free means no restrictions.
On - messages are also downloaded automatically
when you are roaming outside your home network.
Select the check boxes to provide the function you want:
Hide number prevents the sent message from showing your
number.
Read report requests a read notification from receivers of
your messages.
Delivery report requests a delivery notification from
receivers of your messages.
Reply with history includes the original with your reply.
Set whether or not to have a size limit for incoming
messages:
Download size
and
Smaller than
•
No restrictions - the size of the incoming messages
does not matter, all messages will be received.
Smaller than - messages smaller than the limit will
be received, bigger messages will be deflected.
•
Control panel
163
This is the Internet version of the user’s guide. © Print only for private use.
Area Information is a type of text message that is sent to all
subscribers in a certain network area, for example a local traffic
report.
MMS Advanced settings tabs
Receive
These settings apply to multimedia messages that you
receive.
Select the Play full screen checkbox, when you want to
play MMS messages in full screen.
Select the check boxes to send a notification message to the
sender when a message is:
To enable Cell Information
Select the Cell information check box
To turn Area Information on
• Delivered to you: Allow delivery notification
• Read by you: Allow read notification
1. Check the Area information check box. Received messages
will be automatically stored, and displayed in the list when
dismissed.
You can filter reception of incoming messages by message
type (Advertisements Information) or from senders not
,
listed in Contacts (Anonymous senders). Selecting a check
box will filter out messages of that category.
To receive multimedia messages only from senders listed
in your Contacts, select all other check boxes and clear the
2. The list shows all the channels that you have defined on your
P910i. The check box for each channel shows if it is on
(selected, ready to receive messages) or off (cleared, not
active):
check box for Anonymous senders
.
To add a new channel
Area tab
1. Select New
.
On the Area tab you make settings related to Cell Broadcast
Services. These include both Area Information and Cell
Information services. The availability of Cell and Area
Information Services is operator-dependent.
2. Enter the number of the new channel in the New Channel
dialog. Channel numbers can be from 0 to 999. If there are
too many channels defined, New will be disabled and you will
see a message: Maximum channels on SIM
.
Your network may broadcast the area code as cell information.
Your P910i can display it below the network name in the flip
closed standby view.
Channel numbering is operator-dependent. Please consult
your network operator for information.
To turn a channel on or off
Select the channel in the list and select the check box. To turn it
off, clear the check box.
164
Control panel
This is the Internet version of the user’s guide. © Print only for private use.
To delete a channel
Note You access WAP pages through an Internet Service
Provider (ISP) so, when you create a WAP account, you must
choose one of your existing Internet accounts or first create a
new one.
Select Delete. Since deleting a channel cannot be undone, you
will be asked to confirm the delete. Deleting the channel will
also delete any stored Area Information messages for that
channel in your Area Info Inbox.
To create a new WAP account
1. Enter the name of the WAP account.
2. Select the Internet account you want to use. Preferred
WAP accounts
indicates the account set as preferred in the Internet setup.
Use these settings to set up and manage WAP accounts on your
P910i.
3. If you are going to use a WAP gateway or a proxy, select the
Use Proxy check box.
WAP accounts are intended for multimedia messages and for
accessing the Internet through a WAP gateway. (Such gateways
make use of proxy port 9200-9203.) All other proxy settings
should be included in your Internet accounts.
4. Enter the Address of the gateway or proxy.
5. Enter the Port of the gateway or proxy.
For a WAP gateway use:
–
–
9201 for a normal connection.
For security reasons, some WAP pages and services, for
example online banking, can only be accessed from a particular
WAP account.
9203 for an encrypted secure connection.
6. If the gateway/proxy requires Username and Password, which
is very unusual, fill in the last two fields in the dialog.
The dialog has two tabs: Basic and Preferred.
Preferred tab
Select the check box to set a preferred WAP account. It will be
used when you use the Open page command in the
application and when a page is opened from another P910i
application. If you do not set a preferred WAP account, the
preferred Internet account will be used when connecting to the
Internet.
Basic tab
The dialog shows a list of all the WAP accounts on your P910i.
You can add a New account to the list and Edit or Delete an
existing account.
Internet
Control panel
165
This is the Internet version of the user’s guide. © Print only for private use.
Security information
The Other tab
Security information is displayed when Certificate manager
The other tab contains all settings that are not related to the
cannot be sure of the origin of the page or software. For
device or connections. This is also where settings from system
example, security information will be displayed if:
components and add-ons, developed by third-party developers,
will be found.
•
•
The certificate on a page has expired.
The identity of a software manufacturer cannot be verified.
Security information is also displayed when a certificate on your
P910i has:
Certificate manager
Digital certificates ensure that the Web or WAP pages you visit,
or any software you install, really are created by the person you
expect.
•
•
Expired.
Been revoked by the independent organization that issued it.
Certificates may be present on the pages that you view or the
software that you download. Your P910i compares these
certificates with a set of certificates that are stored in Certificate
manager to ensure the authenticity of the page or software. If the
certificates do not match, your P910i informs you, and gives you
the following choices:
Adding and deleting certificates
Your P910i handles certificates automatically so, most of the
time, you can browse the Internet securely without using
Certificate manager. If you do need to add or delete a certificate,
you will usually be informed by your network operator or
system administrator. You should delete a certificate from
Certificate manager if you are informed, or suspect, that:
•
•
Prevent the page being loaded or the software being installed.
Continue at your own risk.
•
•
The certificate does not belong to the person who supplied it.
The certificates on your P910i have been created and issued by
an independent organization that ensures their authenticity.
The certificate was issued incorrectly by the independent
organization that created it.
166
Control panel
This is the Internet version of the user’s guide. © Print only for private use.
When you format a disk, you delete all the information on it,
including any applications that you may have installed. You also
delete all information placed on it by other devices (these
folders are hidden except in File Manager).
Type of certificate
The type can be either User or Certificate Authority
.
•
User certificates contain your identity. This type of certificate
is used when the server asks for client authentication. The
client application requests you to identify yourself by
choosing a user certificate.
IP Security manager
The IP security manager displays stored policies and only one
policy can be activated at a time.This is used for secure
connections over the Internet, typically to a corporate intranet. If
needed, your company information services department will
supply the necessary information.
•
Certificate Authority certificates contain server details. This
type of certificate is handled by your P910i when the server
only requires server authentication. This means that your
identity remains anonymous.
There are two types of passwords needed:
Flip settings
•
IP security password: is to be set when activating the very
first policy, that is, this password is only set once, but it is
possible to change it later at any time by tapping the
Password button.
Flip keyboard - Specify the keyboard your P910i has on the inside
of the flip.
Enable virtual flip - Select the check box to use of the Virtual flip
when the flip of your P910i has been removed.
•
Activation password: is needed when a policy is activated
for the first time and the supplier of the policy gives this.
Format disk
Language selection
This dialog primarily lets you rename and format any Memory
Stick that you install in your P910i. Your P910i comes with one
Memory Stick.
Use this list of all languages stored on your P910i to change
language. The highlighted entry is the language presently in use.
You can delete all languages except English.
Control panel
167
This is the Internet version of the user’s guide. © Print only for private use.
To conserve storage space only a limited set of languages is
Secure tokens
loaded on your P910i at delivery. When you select one of the
If you need access to a network that requires secure access
languages from the list the unused languages in the set are
(often known as ‘strong authentication’), for example a
corporate intranet, you can set up the Internet account you use to
log in to that network to use secure access and generate the
required one-time password when you make the connection.
deleted from the memory of your P910i. You can, at any time,
download additional languages from
www.SonyEricsson.com/support
Master reset
•
•
SecureID from RSA
Use Master reset to reset your P910i.
SafeWord from Secure Computing
Note All user data, as well as pre-installed media files and
application data files (including, for example, backgrounds,
ring signals and pictures), will be deleted and settings will be set
to the state they were, after you selected the language. The
selected local language will be restored.
It is also possible to add other access systems through third-
party software.
If you have a separate device or application that requires one-
time passwords according to one of these systems, you do not
need a separate hardware token generator (Hard Token). Your
P910i can generate passwords that are not associated with an
Internet account.
backup, see ‘Restoring data’ on page 143.
You can restore media files and application data files from the
Content and Application CD, or from the Web.
You manage secure access in your P910i using Secure Tokens.
Each token is associated with one vendor/system and may be
associated with one or more Internet accounts (or none, when
If you want to keep installed applications, clear the Delete user
installed applications check box.
168
Control panel
This is the Internet version of the user’s guide. © Print only for private use.
you use your P910i as a Hard Token). You can configure as
many tokens as needed.
•
In
Tasks, delete all completed entries by selecting
Tasks > Delete completed in your list of entries.
•
Throughout your P910i, use folders as you create and receive
information to speed up housekeeping later.
Tip Dialog details when using secure access are vendor, system
and network-specific. You should contact the administrator of
the network you wish to access to get the correct information.
Deleting or copying general files
Tap Files to see lists of all stored general file types on your P910i
and the Memory Stick. You can copy files to a specified folder,
delete unwanted files, and launch the appropriate application to
view or play a file in the list.
Storage manager
The list shows the applications on your P910i and the space they
occupy. Tapping the Files button lets you manage general files
stored internally on the P910i or on a Memory Stick.
To delete files or copy files between folders
1. Select Files.
Deleting information from applications
2. Select the Type of file to move or delete.
3. Select the Location folder.
To delete information from an application: select an application
in the list. This application is then displayed. Delete the old or
unwanted entries or information.
4. Tap one or more check boxes to select the files to copy or
delete.
Here are some housekeeping tips for different applications:
5. To copy files, tap Copy and select the destination folder.
•
•
•
Delete any unwanted recordings as even short ones occupy a
lot of space.
To delete files, tap Delete. You will be asked to confirm.
In
Messages, delete any old messages from your Inbox or
Uninstalling applications
If you uninstall an application, you can always reinstall it if you
want to use it later.
Sent folders.
In
Calendar, delete all entries in a specified time period by
selecting Calendar > Remove entries in your list of entries.
Control panel
169
This is the Internet version of the user’s guide. © Print only for private use.
To uninstall applications
Note The PIN-G applies to the whole WIM and any items that
do not have a different PIN. This means that no specific items on
the WIM are linked to PIN-G.
1. Select Uninstall.
A list of applications that can be uninstalled is shown.
You can change status of a PIN:
2. Select the application to uninstall.
3. Select Uninstall.
•
•
Enable PIN A PIN code that is enabled is requested for
authorisation of an operation. To proceed with the operation
you must enter the PIN code.
Note You cannot uninstall the standard applications that come
with your P910i.
Disable PIN A PIN code that is disabled is not requested to
authorize an operation to proceed.
WIM PIN settings
To change the PIN code
WIM (WAP Identity Module) is used for performing security
functions, especially to store and process information needed for
user identification and authentication. It is a tamper-resistant
store for private keys, certificates and other items that may
require a PIN for access or modification.
1. Select the PIN you want to change from the choice list.
2. Select Change PIN
.
If a PIN code has been blocked, you must unblock it before it
can be used again. Select the PIN and select Change PIN
.
The WIM management dialog consists of a PIN choice list and a
WIM items list.
You can select a PIN from the PIN choice list. The WIM items
list changes content dynamically, displaying only the keys that
are protected by the selected PIN and also have an associated
certificate. Other keys that are protected by the selected PIN but
do not have an associated certificate are not shown in the WIM
item list. This is the case when WIM PIN (PIN-G) is selected.
170
Control panel
This is the Internet version of the user’s guide. © Print only for private use.
Getting started with Internet and Messages
Connection type
When your P910i connects to a service provider, it will use a
GSM or GPRS network provided by a network operator. Many
network operators offer both GPRS and GSM services.
Introduction
Before you can use
Internet and
Messages to access the
Internet and send or receive messages, you will need to make
some user-specific settings in the
Control Panel.
The connection type defines which network your account uses
to connect to the Internet. GPRS Internet accounts use the GPRS
network, and Dial-Up Internet accounts use the GSM network.
Service provider
You will need a service provider to connect your P910i to the
network.The service provider could be:
GPRS
If your network operator supports GPRS, a GPRS Internet
account allows you to:
•
An Internet Service Provider (ISP) which connects you to the
Internet.
•
•
An access point provided by your network operator.
•
Remain permanently connected to the Internet without being
charged for connection time. With a GPRS account, you are
charged for the amount of information you view, download
or send when your are connected to the Internet. Check your
operator for details of your subscription.
A private service provider such as your company or your
bank.
You will need to enter specific service provider details into your
P910i to set up an Internet account. It can hold the details of
multiple service providers, for example, you may have separate
Internet and corporate accounts.
•
Avoid having to reconnect to the Internet if the connection is
broken.
Dial-Up
Your network operator or retailer may have pre-installed
services, check with them.
For both Dial-Up and High-Speed Dial-Up accounts, you are
charged for the length of time you are connected. If your
network operator supports them, you can increase your
connection speed (at a cost) by setting up a high-speed account.
Getting started with Internet and Messages
171
This is the Internet version of the user’s guide. © Print only for private use.
Accepting new Internet or Messages
settings
Automatically set up service
provider and messaging
New phone set-up messages will appear in the Auto setup
The easiest way to set up your P910i is automatically, through
your service provider.
account inbox of
Messages. (Phone set-up messages for
email accounts will, however, be found in your SMS message
inbox.)
For
of:
Messages settings your P910i supports automatic setup
When an phone set-up message appears, select it.
•
•
email accounts
A dialog with a brief text and operator message appears on the
screen. You can accept the new settings or leave the message in
MMS message (Multimedia Messaging Service) settings.
the inbox
.
Check your service provider's Web site for information or
contact their support desk and ask about automatic remote
phone set-up of ISP (Internet Service Provider) settings, email
and MMS message settings.
If the name of the new account is the same as that of an existing
account you can choose to create a new account with the same
name or replace the existing account.
Note Never accept remote phone set-up messages if you are not
expecting them or are unsure where they have come from.
If remote phone set-up is possible, they will send you the phone
set-up messages required by SMS message.
Settings valid for your network operator and one or more of
these services may also be available through the phone setup-
message generator at www.SonyEricsson.com/support
Manually set up service
provider
To check that your SMS messaging settings are correct
As an alternative to setting up an Internet account automatically,
1. Select
Control panel > Connections > Messaging accounts >
you can enter the settings manually from
Connections > Internet accounts.
Control panel >
SMS.
2. Check the information, for example the address of the service
centre.
172
Getting started with Internet and Messages
This is the Internet version of the user’s guide. © Print only for private use.
this information from your ISP (Internet Service Provider), or if
you are connecting to a corporate network, your information
services department.
The dialog has four tabs, one for each type of messaging
service:
email
The provider of your email service, or for a corporate
account, your information services manager can provide
you with the necessary details.
All settings are described in ‘Internet accounts’ on page 155.
All settings are described in ‘Email tab’ on page 160.
To set up a new account follow the steps under ‘To create a
new email account’ on page 160.
To set up a new account follow the steps under ‘To create a new
Internet account’ on page 156.
SMS
Short Message Service
message
The necessary settings are usually provided on your SIM
card.
All settings are described in ‘SMS tab’ on page 162.
As an alternative to setting up Messages automatically, you can
MMS
message
Multimedia Messaging Service
Your MMS messaging provider will be able to provide you
with the necessary information.
Before you set up MMS messaging you need to set up an
Internet account in Control panel > Connections > Internet
accounts and a WAP account in Control panel >
Connections > WAP accounts
enter the settings for the messaging services you want to use
yourself from
Control panel > Connections > Messaging
accounts
.
First collect all the information you will need. You can obtain
this information from the following sources:
All settings are described in ‘MMS tab’ on page 163.
•
If your network operator offers an email service you can get
the necessary details from them.
Area
Cell Broadcast Service: Area and Cell information
Your network operator will be able to inform you if these
services are available.
•
•
Your Internet service provider.
Your information services manager in the case of connecting
to the corporate network to access your work email account.
All settings are described in ‘Area tab’ on page 164.
•
Your network operator in the case of SMS message and Cell
Broadcast Services.
Getting started with Internet and Messages
173
This is the Internet version of the user’s guide. © Print only for private use.
First collect all the information you will need. You can obtain
Setting up WAP accounts
this information from the WAP service provider, or if you are
A WAP account (sometimes called a WAP profile) defines a
connecting to a corporate network, your information services
service provider and gateway that should be used when making
manager.
a connection to WAP services. You also need a WAP account
when you use MMS message (Multimedia Messaging Service).
All settings are described in ‘WAP accounts’ on page 165.
To set up a new account follow the steps under ‘To create a new
WAP account’ on page 165.
The WAP gateway sits between your P910i and the WAP site
coding and decoding information. You can set up details of more
than one gateway if necessary, for example one for your MMS
messaging, one to access corporate data over WAP, and another
to access your bank's WAP service.
Using your P910i as a modem
Your P910i contains a complete GSM/GPRS modem, so you
can use it to connect your PC to the Internet or corporate
intranet.Your P910i appears to the laptop like a normal modem.
The easiest way to set up a WAP account on your P910i is
automatically, through your service provider. Check your
service provider's Web site for information or contact their
support desk and ask about automatic setup. You can also find
more information, and settings for many operators on:
http://www.SonyEricsson.com/support.
You link the laptop to your P910i using Bluetooth wireless
technology, infrared, or cable (USB or serial).The connection
over the air can be by any of the bearers that your P910i
supports:
Note You access WAP pages through an Internet Service
Provider (ISP) so, when you create a WAP account, you must
choose one of your existing Internet accounts or first create a
new one.
•
•
•
GPRS
HSCSD (High-speed Circuit Switched Data)
CSD (Circuit Switched Data).
Manually set up a WAP account
Instead of setting up a WAP account automatically, you can
A Windows modem driver file and a PC utility, the Dial-Up
Networking Wizard, is provided on your Sony Ericsson PC Suite
CD. The wizard will help you configure DUN (Dial-Up
enter the settings manually from
Control panel > Connections >
WAP accounts
.
174
Getting started with Internet and Messages
This is the Internet version of the user’s guide. © Print only for private use.
Networking) entries on your PC for GPRS and HSCSD
connections.
must be connected to the PC via cable, infrared or Bluetooth
wireless technology. See ‘Connecting to other devices’ on
page 134.
Once paired with a Bluetooth-enabled laptop, your P910i is
ready to make a connection to the Internet or corporate network.
Since Bluetooth is wire-free and requires no line-of-sight
alignment, you can place the laptop in a comfortable position
and let your P910i remain in your pocket, briefcase, or even be
placed up to 10 metres away.
Make sure that you have any information concerning, for
example, phone numbers, names of servers or domains, that the
server that you want to connect to may require.
To set up a GPRS or HSCSD (High-Speed Circuit Switched
Data) connection using the Dial-Up Networking Wizard
If you wish to use an infrared link, the range is typically up to
one metre. The two infrared ports must be kept in line of sight,
at an angle of no more than approximately 30 degrees.
1. Start the Dial-Up Networking Wizard from the Sony Ericsson
folder of the Start menu on your PC.
2. Choose Create a new Dial-Up connection.
3. Follow the instructions in the wizard.
The Dial-Up Networking Wizard
The wizard simplifies creating GPRS DUN connections by
setting the proper values in the PC DUN entry and linking the
entry to one of the GPRS configurations in your P910i. You can
also view and modify the GPRS settings in the P910i.
To edit a previously created DUN entry
1. Start the Dial-Up Networking Wizard from the Sony Ericsson
folder of the Start menu on your PC.
2. Modify a Dial-Up connection.
For HSCSD DUN entries, the wizard updates the modem
settings such that the specified data rate and type of bearer
(ISDN / Analogue) will be used when you make a DUN
connection.
3. Select the desired connection from the list.
4. Follow the instructions in the wizard.
To define P910i as a modem
To set up a CSD (GSM Data) or HSCSD connection you will
need to install your P910i as a modem manually.
You can view or change the DUN entries created with the
wizard using the standard Windows DUN user interface.
The Dial-Up Networking Wizard software included in the Sony
Ericsson PC Suite must be installed in your PC and your P910i
Getting started with Internet and Messages
175
This is the Internet version of the user’s guide. © Print only for private use.
To set up a Dial-Up entry for CSD or HSCSD
GPRS - connection information
1. On the PC, open the Control Panel.
Icons on the status bar let you overview the information on data
2. Choose to install a new modem.
connection calls.
3. Choose your P910i as the modem.
4. Select the port where the P910i is connected.
A combined signal strength and GPRS signal icon provides
information on the GPRS service status. The GPRS connection
status appears above the signal strength icon. There are three
5. Confirm the selection. A new DUN connection has been
created.
states for the icon, unavailable
attached
, available
and
.
Connecting
The HSCSD/CSD
a data connection. Where GPRS is suspended, for example, the
GPRS suspended state is indicated by a combined icon
There are three states for the GPRS icon: Active
active transferring data (alternates between and
and suspended . Any data transfer either received or sent
and GPRS
icons are displayed during
To connect using a DUN entry created by the wizard
.
1. If you are connecting by cable, set your P910i to Modem cable
,
connection mode, see ‘Cable’ on page 154.
)
2. Use any conventional method to make a connection:
– Click the Desktop shortcut created by the wizard.
– Select the entry from within the system DUN folder.
activates the GPRS active icon for 5 seconds.
Connection information
When you select the data connection icon, during an active data
connection, a menu appears with the choices Information and
– Run an application that has built-in support for using
DUN entries (for example a browser or email client).
Disconnect
.
•
•
Select Information to view information on the connection.
Select Disconnect to end the connection.
176
Getting started with Internet and Messages
This is the Internet version of the user’s guide. © Print only for private use.
To reset the log of an account
GPRS status information
1. Select an account in the list.
When the signal strength icon is selected, network, GPRS status
information and, if applicable, GPRS error text appear.
2. Select GPRS data log > Reset
.
To delete or reset the log of several accounts
GPRS data log
1. Select the check boxes of the accounts in the list to be deleted
or reset.
A new GPRS data log entry is created when a GPRS account
establishes a connection for the first time. It does not wait for
transfer data. If there is an existing data log associated with the
current GPRS connection, this is updated.
2. Select GPRS data log > Reset or GPRS data log > Delete
.
Session data
The GPRS data log shows a list of GPRS Internet accounts.
Where one account is active or suspended, the relevant status
icon is displayed to the left of the account.
When the connection is deactivated, for example when the
current Internet account is disconnected, the total data sent and
received in the last session is displayed.
The information is displayed for a couple of seconds. To dismiss
To view information on an account
the information when the flip is closed, press
.
1. Select an account in the list.
2. Information on the account is shown. The data log is updated
dynamically.
Buttons allow you to delete or reset the current data. These
buttons are disabled during an active or suspended
connection.
To delete the log for an account
1. Select an account in the list.
2. Select GPRS data log > Delete
.
Getting started with Internet and Messages
177
This is the Internet version of the user’s guide. © Print only for private use.
REFERENCE
Troubleshooting
This chapter consists of a selection of suggestions for solving
possible problems with your P910i. If this does not help, please
Start-up problems
try the Knowledge base on the global support site,
www.SonyEricsson.com/support. There you also find other
information that can be helpful.
P910i will not
start
• Handheld phone: recharge or replace the battery.
• Make sure the contacts on the battery and
charger are clean and avoid charging the battery
in extreme temperatures.
Your P910i also contains help files with additional information.
Access help with the menu option Edit > Help or, in many dialog
• Vehicle Handsfree: check that the P910i is
properly inserted into the holder and check the
fuse in the fuse holder (connected to the battery
cable).
boxes, with the help icon
.
To improve performance, you can update the software of your
P910i. See “Sony Ericsson Update Service” on page 133.
Lock problems
If you need to hand in your P910i for repair, please note that you
may lose information and content that you have saved in your
P910i. You are advised to make a copy of such information
(make a backup) before handing your P910i in for repair.
Insert card
• Make sure a SIM card is activated and inserted
into your P910i. See ‘SIM card’ on page 12.
Blocked SIM
card
If your PIN is entered incorrectly three times in a
row, the SIM card will be blocked. You can
unblock it by using your PUK. See ‘SIM card lock’
on page 37.
178
Troubleshooting
This is the Internet version of the user’s guide. © Print only for private use.
Device lock
Phone locked is displayed followed by the prompt
Communication problems
Enter lock code
.
Telephone does • The received signal can be too weak, possibly
Your P910i is locked to prevent unauthorized use.
To unlock the P910i:
• Enter your device lock code, 0000 by default,
not work
because you are being shielded from the signal.
Check your display signal strength indicator.
Move outdoors or up from the ground to obtain a
sufficiently strong signal.
then press
or
.
• Make sure the P910i is not set in Flight mode.
Key symbol
The keypad is locked to prevent unintentional key
action.
• Your P910i might be busy sending or receiving
data or email.
Press
keys.
followed by
to unlock the
• Check the settings for diverting or restricting
calls. See ‘Divert calls’ on page 54, ‘Accept
calls’ on page 55 and ‘Restrict calls’ on page 55.
Indicator light
Flashes red
This indicates that the battery is running low and
soon needs recharging or replacing with a spare.
• With Vehicle Handsfree (VHF) equipment, make
sure that the following are inserted or connected:
Your P910i and its holder, the fuse in the fuse
holder, and/or the external antenna.
• If Emergency calls only is displayed on the
screen, you are not allowed to use the network
within range. You can, however, usually make an
emergency call using the emergency number.
• If No network is displayed on the screen, you are
in an area that is not covered by a network or the
received signal is too weak.
Does not flash
If the indicator light at the top of your P910i does
not flash and no network is displayed there is no
network within range. See ‘Telephone does not
work’ on page 179.
Cannot hear
incoming call
• Increase the ring signal volume.
• Your P910i is set in silent mode.
• Your P910i is set in Flight mode.
Troubleshooting
179
This is the Internet version of the user’s guide. © Print only for private use.
The person I
am talking to
has a problem
hearing what I
am saying
• Make sure you do not cover the microphone
when you talk. You find the microphone at the
bottom of the phone, next to the connector.
Cannot use
e-mail
• Check with your service provider that your
subscription includes email.
• The settings might not be correct. Enter new
settings. Use the phone setup-message generator
for email on www.SonyEricsson.com/support
to send you an auto setup message, or contact
your service provider. See also “Email tab” on
page 160.
• You could be almost out of network range. The
sound improves with a better network
connection.
Cannot use
WAP
• Your subscription does not include WAP. Check
with your service provider.
Fax calls
• Your P910i does not support fax transmission.
Even if your operator subscription supports fax
transmission, fax calls will be rejected. However,
they can be diverted to another number such as
the office fax number, see ‘Divert calls’ on
page 54 for more information.
• The settings are not correct. Enter new settings.
Contact you service provider or visit
www.SonyEricsson.com/support and use the
WAP phone setup-message generator.
Cannot send
nor receive
SMS or MMS
• Your subscription does not include SMS or
MMS. Check with your service provider.
• Make sure potential fax callers do not try to send
a fax to your P910i as they can experience a
number of retries before the fax transmission is
stopped.
• Check with you service provider that you have
number.
• Check the settings in the Control panel. Contact
you service provider or visit
www.SonyEricsson.com/support and use the
MMS phone setup-message generator.
• Make sure that Flight mode is deactivated.
• Phone memory might be full. Delete some
pictures or music, for example.
180
Troubleshooting
This is the Internet version of the user’s guide. © Print only for private use.
Cannot
establish
• Make sure that the devices are correctly paired.
See ‘Connection via Bluetooth wireless
technology’ on page 136.
Problems to connect to a PC or another device
Not possible to • Make sure that the SyncStation and cable is
connection with
a Bluetooth
wireless
technology
handset or
handsfree
establish
correctly connected to the PC.
• Make sure that the handset or handsfree is
charged.
connection
using cable
• Make sure that the correct COM port on the PC
is enabled. Right-click the P910i link symbol in
the PC taskbar, and select Properties. Select the
USB COM port.
• Make sure that the devices are in range with each
other.
• Make sure the device lock is not active.
Cannot find PC • You can find PC software on
• Uninstall Sony Ericsson PC Suite. Connect the
SyncStation with the P910i to the PC. Reinstall
Sony Ericsson PC Suite, following the
installation procedure carefully.
software for
downloading
www.SonyEricsson.com/support and also on
local sites.
Cannot use my • First ask your service provider to enable your
• Check for Sony Ericsson PC Suite updates on
www.SonyEricsson.com/support. If you find
install this instead of the old one.
P910i as a
modem
data connection.
• Then connect your P910i to your PC with cable,
Bluetooth technology, or infrared. See “Using
your P910i as a modem” on page 174,
“Connecting to other devices” on page 134, and
Knowledge base on
Cannottransfer Place the P910i in the SyncStation. In the PC, open
pictures
My P910i and browse through the P910i file
system to find the picture.
www.SonyEricsson.com/support
Cannottransfer • Make sure that Bluetooth wireless technology is
items with
Bluetooth
wireless
activated.
• Make sure that the devices are in range with each
other. Maximum range is 10 metres.
technology
Troubleshooting
181
This is the Internet version of the user’s guide. © Print only for private use.
Cannot
synchronize
with my PC
• Connect to your PC with cable, Bluetooth
technology, or infrared. See “Connecting to
other devices” on page 134.
Storage
Manager
You can also use the storage manager to free up
memory.
• Select
Applications >
Control
• Then install Sony Ericsson PC Suite, and make
necessary settings. See “Synchronization and
backup” on page 139 and the help files in Sony
www.SonyEricsson.com/support
panel > Other > Storage manager.
• A list of all applications and their memory
requirements is shown.
• See ‘Deleting or copying general files’ on
page 169 and ‘Deleting information from
applications’ on page 169.
Memory full
When your P910i has no more space available to
Information in Use the applications to remove unused or old items
save or store information, the icon
is shown in
applications
from the P910i internal memory:
• WAP history or bookmarks.
• Messages.
the status bar. You must then free up memory to
ensure the proper functioning of the P910i.
• Make sure regular backups are made with
Communications Suite to reduce the risk of lost
or corrupted information.
• Contacts.
• Call logs.
• Calendar tasks or appointments.
• Jotter notes.
Storage Wizard
• Tap the icon
in the status bar to start the
Miscellaneous
Storage Wizard, or start it in the application
launcher. Then use the storage wizard to move
items from the P910i internal memory to a
Memory Stick, or remove items from the P910i
memory.
Cannot save on • You might have a Memory Stick with a lock
Memory Stick
switch. Move the switch in the other direction.
• The Memory Stick might be full. Delete some
files on it.
182
Troubleshooting
This is the Internet version of the user’s guide. © Print only for private use.
Tap on display
does not work
Applications
stop responding
• Close the flip and open it again.
Occasionally you may find that you tap one
item (for example a button or menu option)
but another is activated. Calibrating the
screen ensures that the correct item is
activated. Tap Control panel > Device tab >
Display > Screen tab > Calibrate screen and
follow the instructions.
• Turn off the P910i and turn it on again.
• Remove the battery, wait about 10 seconds, and
insert it again.
• Phone memory might be full. Delete some
pictures or music, for example.
• If the problem continues, do a master reset. See
‘Master reset’ on page 168. All data will be lost.
Cannot change • The first time you start the P910i you select a
language
language. All other languages are then deleted, in
order to free memory. You can find all languages
on the Sony Ericsson PC Suite CD. From the CD,
find more languages on
System failure
In the case of a system failure, your P910i will
flash an animated warning. To recover, please
restart the P910i like this:
• Press and hold the On/Off button for at least 10
seconds to turn the P910i off.
www.SonyEricsson.com/support
• Restart as normal: Press the On/Off button to
turn on your P910i.
• When you have installed a new language, you
have to turn your P910i off and then on again for
the change to take effect.
Incorrect
character
appears when
keyboard key is
pressed
• The wrong keyboard type can be specified in the
control panel. Make sure the correct settings are
defined in Control panel > Device tab > Flip
settings > Flip keyboard
.
Troubleshooting
183
This is the Internet version of the user’s guide. © Print only for private use.
Guidelines for safe and efficient use
Please read this information before using your mobile phone.
Radio Frequency (RF) Exposure and SAR
Your mobile phone is a low-power radio transmitter and receiver. When it is turned
on, it emits low levels of radio frequency energy (also known as radio waves or
radio frequency fields).
Note Important: to avoid hearing impairment, answer call or lower volume before
placing this product to your ear.
Recommendations
Governments around the world have adopted comprehensive international safety
guidelines, developed by scientific organizations, e.g. ICNIRP (International
Commission on Non-Ionizing Radiation Protection) and IEEE (The Institute of
Electrical and Electronics Engineers Inc.), through periodic and thorough
evaluation of scientific studies. These guidelines establish permitted levels of radio
wave exposure for the general population. The levels include a safety margin
designed to assure the safety of all persons, regardless of age and health, and to
account for any variations in measurements.
• Always treat your product with care and keep it in a clean and dust-free place.
• Do not expose your product to liquid or moisture or humidity.
• Do not expose your product to extreme high or low temperatures.
• Do not expose your product to open flames or lit tobacco products.
• Do not drop, throw or try to bend your product.
• Do not paint your product.
Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio
frequency energy absorbed by the body when using a mobile phone. The SAR
value is determined at the highest certified power level in laboratory conditions,
but the actual SAR level of the mobile phone while operating can be well below
this value. This is because the mobile phone is designed to use the minimum power
required to reach the network.
• Do not use your product near medical equipment without requesting permission.
• Do not use your product when in, or around aircraft, or areas posted ‘turn off
two-way radio’.
• Do not use your product in an area where a potentially explosive atmosphere
exists.
Variations in SAR below the radio frequency exposure guidelines do not mean that
there are variations in safety. While there may be differences in SAR levels among
mobile phones, all Sony Ericsson mobile phone models are designed to meet radio
frequency exposure guidelines.
A separate leaflet with SAR information for this mobile phone model is included
with the material that comes with this mobile phone. This information can also be
found, together with more information on radio frequency exposure and SAR, on:
www.SonyEricsson.com.
• Do not place your product or install wireless equipment in the area above your
car’s airbag.
• Do not attempt to disassemble your product. Only Sony Ericsson authorized
personnel should perform any service.
Antenna
Only use an antenna that has been specifically designed by Sony Ericsson for your
mobile phone. Use of unauthorized or modified antennas could damage your
mobile phone and may violate regulations, causing loss of performance and SAR
levels above the recommended limits (see below).
Driving
Please check if local laws and regulations restrict the use of mobile phones while
driving or require drivers to use handsfree solutions. We recommend that you use
only Ericsson or Sony Ericsson handsfree solutions intended for use with your
product. Please note that because of possible interference with other equipment,
Efficient use
Hold your mobile phone as you would any other phone. Do not cover the top of the
phone when in use, as this affects call quality and may cause the phone to operate
at a higher power level than needed, thus shortening talk and standby times.
184
Guidelines for safe and efficient use
This is the Internet version of the user’s guide. © Print only for private use.
some vehicle manufacturers forbid the use of mobile phones in their vehicles
unless a handsfree kit with an external antenna supports the installation.
Always give full attention to driving and pull off the road and park before making
or answering a call if driving conditions so require.
Emergency Calls
Mobile phones operate using radio signals, which cannot guarantee connection
under all conditions. Therefore you should never rely solely upon any mobile
phone for essential communications (e.g. medical emergencies).
Emergency calls may not be possible on all cellular networks or when certain
network services and/or mobile phone features are in use. Check with your local
service provider.
Personal Medical Devices
Mobile phones may affect the operation of cardiac pacemakers and other
implanted equipment. Please avoid placing the mobile phone over the pacemaker,
e.g. in your breast pocket. When using the mobile phone, place it at the ear
opposite the pacemaker. If a minimum distance of 15 cm (6 inches) is kept
between the mobile phone and the pacemaker, the risk of interference is limited. If
you have any reason to suspect that interference is taking place, immediately turn
off your mobile phone. Contact your cardiologist for more information.
For other medical devices, please consult the manufacturer of the device.
Battery Use and Care
We recommend that you fully charge the battery before you use your mobile phone
for the first time. The battery can only be charged in temperatures between +5°C
(+41°F) and +45°C (+113°F).
A new battery or one that has not been used for a long time could have reduced
capacity the first few times it is used.
The talk and standby times depend on the actual transmission conditions when
using the mobile phone. If the mobile phone is used near a base station, less power
is required and talk and standby times are prolonged.
A rechargeable battery can be charged and discharged hundreds of times.
However, it will eventually wear out – this is not a defect. When the talk-time or
standby time is noticeably shorter, it is time to replace your battery. Sony Ericsson
recommends that you use only batteries and chargers approved by Sony Ericsson.
Children
DO NOT ALLOW CHILDREN TO PLAY WITH YOUR MOBILE PHONE OR
ITS ACCESSORIES. THEY COULD HURT THEMSELVES OR OTHERS, OR
COULD ACCIDENTALLY DAMAGE THE MOBILE PHONE OR
ACCESSORIES. YOUR MOBILE PHONE AND ITS ACCESSORIES MAY
CONTAIN SMALL PARTS THAT COULD BE DETACHED AND CREATE A
CHOKING HAZARD.
• Warning! May explode if disposed of in fire.
• Use only Ericsson or Sony Ericsson branded original batteries and
chargers intended for use with your mobile phone. Other
chargers may not charge sufficiently or may produce excessive
heat. Using other batteries and chargers could be dangerous.
Disposing of the Product
Your mobile phone should not be placed in municipal waste. Please check local
regulations for disposal of electronic products.
• Do not expose the battery to liquid.
Power Supply
• Do not let the metal contacts on the battery touch another metal
object. This could short-circuit and damage the battery.
Connect the AC power adapter only to designated power sources as marked on the
product. Make sure the cord is positioned so that it will not be subjected to damage
or stress. To reduce the risk of electric shock, unplug the unit from any power
source before attempting to clean it. The AC power adapter must not be used
outdoors or in damp areas. Never alter the cord or plug. If the plug will not fit into
the outlet, have a proper outlet installed by a qualified electrician.
• Do not disassemble or modify the battery.
Guidelines for safe and efficient use
185
This is the Internet version of the user’s guide. © Print only for private use.
• Do not expose the battery to extreme temperatures, and never
above +60°C (+140°F). For maximum battery capacity, use the
battery in room temperature.
authorized distributors or service partners, in the country/region* where you
purchased the Product, will, at their option, either repair or replace the Product in
accordance with the terms and conditions stipulated herein.
Sony Ericsson and its service partners reserve the right to charge a handling fee if a
returned Product is found not to be under warranty according to the conditions
below.
• Turn off your mobile phone before removing the battery.
• Keep out of the reach of children.
Please note that your personal settings/downloads might be lost when the Product
is repaired or replaced.
• Use the battery for the intended purpose only.
• Do not allow the battery to be put into the mouth. Battery
electrolytes may be toxic if swallowed.
Conditions
Disposing of the battery
1. The warranty is valid only if the original proof of purchase issued to the original
purchaser by a dealer authorized by Sony Ericsson for this Product, specifying
the date of purchase and serial number**, is presented with the Product to be
repaired or replaced. Sony Ericsson reserves the right to refuse warranty
service if this information has been removed or changed after the original
purchase of the Product from the dealer.
Please check local regulations for disposal of batteries or call your
local Sony Ericsson Customer Care Centre for information.
The battery should never be placed in municipal waste. Use a
battery disposal facility if available.
2. If Sony Ericsson repairs or replaces the Product, the repaired or replaced
Product shall be warranted for the remaining time of the original warranty
period or for ninety (90) days from the date of repair, whichever is longer.
Repair or replacement may involve the use of functionally equivalent
reconditioned units. Replaced parts or components will become the property of
Sony Ericsson.
Limited warranty
Sony Ericsson Mobile Communications AB, S-221 88 Lund, Sweden, (Sony
accessory delivered with your mobile phone (hereinafter referred to as "Product").
Should your Product need warranty service, please return it to the dealer from
whom it was purchased, or contact your local Sony Ericsson Customer Care Centre
information.
3. This warranty does not cover any failure of the Product due to normal wear and
tear, or due to misuse, including but not limited to use in other than the normal
and customary manner, in accordance with the Sony Ericsson instructions for
use and maintenance of the Product. Nor does this warranty cover any failure
of the Product due to accident, software or hardware modification or
adjustment, acts of God or damage resulting from liquid.
Our warranty
Subject to the conditions of this Limited Warranty, Sony Ericsson warrants this
Product to be free from defects in design, material and workmanship at the time of
its original purchase by a consumer, and for a subsequent period of one (1) year.
4. Since the cellular system on which the Product is to operate is provided by a
carrier independent from Sony Ericsson, Sony Ericsson will not be responsible
for the operation, availability, coverage, services or range of that system.
5. This warranty does not cover Product failures caused by installations,
modifications, or repair or opening of the Product performed by a non-Sony
Ericsson authorized person.
What we will do
If, during the warranty period, this Product fails to operate under normal use and
service, due to defects in design, materials or workmanship, Sony Ericsson
186
Guidelines for safe and efficient use
This is the Internet version of the user’s guide. © Print only for private use.
6. The warranty does not cover Product failures which have been caused by use of
accessories or other peripheral devices which are not Ericsson or Sony
Ericsson branded original accessories intended for use with the Product.
7. Tampering with any of the seals on the Product will void the warranty.
8. THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR
ORAL, OTHER THAN THIS PRINTED LIMITED WARRANTY. ALL
IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL SONY ERICSSON OR ITS
LICENSORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT
LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL
EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW.
Some countries/states do not allow the exclusion or limitation of incidental or
consequential damages, or limitation of the duration of implied warranties, so the
preceding limitations or exclusions may not apply to you.
The warranty provided does not affect the consumer's statutory rights under
applicable legislation in force, nor the consumer's rights against the dealer arising
from their sales/purchase contract.
* European Union (EU)
If you have purchased your Product in an EU country you can have your Product
serviced, under the conditions set out above, within the warranty period in any EU
country where an identical Product is sold by an authorized Sony Ericsson
distributor. To find out if your Product is sold in the EU country you are in, please
call the local Sony Ericsson Customer Care Centre. Please observe that certain
services may not be possible anywhere other than in the country of original
purchase, for example due to the fact that your Product may have an interior or
exterior which is different from equivalent models sold in other EU countries. It
may not be possible to repair SIM-locked Products.
** In some countries/regions additional information is requested. If so, this is
clearly shown on the valid proof of purchase.
Guidelines for safe and efficient use
187
This is the Internet version of the user’s guide. © Print only for private use.
FCC Statement
Declaration of Conformity
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
We, Sony Ericsson Mobile Communications AB of
Nya Vattentornet
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
S-221 88 Lund, Sweden
declare under our sole responsibility that our product
Sony Ericsson type FAB-1021012-BV and FAB-1021012-CN
and in combination with our accessories, to which this declaration relates is in
conformity with the appropriate standards 3GPP TS 51.010-1, EN 301489-7,
EN 300328, EN 301489-17 and EN 60950, following the provisions of, Radio
Equipment and Telecommunication Terminal Equipment directive 99/5/EC with
requirements covering EMC directive 89/336/EEC, and Low Voltage directive 73/
23/EEC.
Environmental information
•Halogenated flame retardants are not used in cabinets or the
printed wiring board of the phone.
Kista, June 2004
Place & date of issue
0682
• Power consumption of charger during standby < 0.3W.
For more environmental information, look at the Environmental Declaration for
P910i at www.SonyEricsson.com
We fulfil the requirements of the R&TTE Directive (99/5/EC).
188
Guidelines for safe and efficient use
This is the Internet version of the user’s guide. © Print only for private use.
Terms and definitions
AU
bps
Format for audio data files .AU files have the suffix .au
Bits per second – rate of data flow.
Bearer
cHTML
Path over which data flows. Specifically in CSD and HSCSD,
the type of phone link from the GSM network to the server –
PSTN or ISDN.
A version of HTML optimised for small devices.
CLI
Calling Line Identity. Shows the number of the person calling
you in your mobile phone display. Your P910i will also display
the name and photograph of the caller if they are in Contacts.
You can then make an informed choice as to whether or not to
take the call. Bear in mind that not all numbers can be displayed.
To use this service, it must be supported by your network.
Bluetooth
Bluetooth wireless technology is a secure, fast radio connection
technology. It is a computing and telecommunications industry
specification that describes how mobile phones, computers, and
personal digital assistants (PDAs) can easily interconnect with
each other and with home and business phones and computers
using a short-range wireless connection.
COM Port
Defines a serial/RS-232 port within the Windows environment.
BMP
CS
Microsoft Windows Bitmap. A graphics format defined by
Microsoft supporting 1, 4, 8 or 24 bit colour depth. No
compression, so files can be large.
Circuit Switched. Connection from A to B which has a fixed
bandwidth and is maintained over a period of time, for example
a voice phone call.
Bookmark
CSD
A URL and header/title stored in the phone, enabling the user to
go directly to a Web or WAP page.
Circuit Switched Data. CSD is a GSM service providing a CS
data connection at a rate of 9.6 or 14.4kbps.
Terms and definitions
189
This is the Internet version of the user’s guide. © Print only for private use.
CSS
GIF
Cascading Style Sheet. A feature of browsers.
Graphics Interchange Format. Format for storing images which
also supports animated images. Highly compressed by limiting
the colour palette to 16 or 256 colours. It is one of the two most
common file formats for graphic images on the World Wide
Web. The other is JPEG.
DTMF
Dual Tone Multi Frequency. A method of coding digits as a
combination of two audible tones.
DUN
GPRS
Dial-Up Networking. The dial-up networking capability in
Windows.
General Packet Radio Services. A radio technology for GSM
networks that adds packet-switching protocols, shorter setup
time for ISP connections, and offers the possibility of charging
by the amount of data sent rather than by connection time.
GPRS promises to support flexible data transmission rates
typically up to 20 or 30 kbps (with a theoretical maximum of
171.2 kbps), as well as continuous connection to the network.
e-GSM
Extended GSM. New frequencies specified by the European
Radio Communications Committee (ERC) for GSM use when
additional spectrum is needed (network-dependent). It allows
operators to transmit and receive just outside GSM's core
900MHz frequency band. This extension gives increased
network capability.
GSM
Global System for Mobile Communications. GSM is the world's
most widely-used digital mobile phone system, now operating
in over 160 countries around the world.
EMS
Enhanced Messaging Service. An extension of SMS enabling
pictures, animations, sound and text formatting to be added to
text messages.
GSM 900
The GSM system family includes GSM 900, GSM 1800 and
GSM 1900. GSM 900 refers to GSM working on a frequency of
900 MHz.
FCC
Federal Communications Commission. US government agency
which regulates radio communications.
190
Terms and definitions
This is the Internet version of the user’s guide. © Print only for private use.
GSM 1800
your local server. The email is received and held for you by your
IMAP server. You (or your client email receiver) can view just
the heading and the sender of the letter and then decide whether
to download the mail.
Also known as DCS 1800 or PCN, this is a GSM digital network
working on a frequency of 1800 MHz. It is used in Europe and
Asia-Pacific.
GSM 1900
IrDA
Also known as PCS. Refers to a GSM system running in the
1900 MHz band. Used in the USA and Canada, for instance.
The Infrared Data Association is dedicated to developing
standards for wireless, infrared transmission systems between
devices. With IrDA ports, a device such as your P910i can
exchange data with other devices without a cable connection.
IrDA requires line-of-sight transmission.
HSCSD
High-Speed Circuit-Switched Data (HSCSD) is circuit-switched
wireless data transmission for mobile users at data rates of up to
64 kbps.
ISDN
Integrated Services Digital Network. Communication protocol
offered by phone companies that permits phone networks to
carry data, voice, and other source traffic. Selecting ISDN for
CSD/HSCSD connections provides quicker call setup.
HTML
Hypertext Markup Language is the set of markup symbols or
codes inserted in a file intended for display on a World Wide
Web browser page. The markup tells the Web browser how to
display a Web page's words and images.
ISP
Internet Service Provider. An organization that provides access
to the Internet.
HTTP
HyperText Transfer Protocol. The communications protocol
used to connect to servers on the World Wide Web. Its primary
function is to establish a connection with a Web server and
transmit HTML pages to the client browser.
JFIF
JPEG File Interchange Format.
JPEG
IMAP4
Joint Photographic Experts Group, best known for the .JPG
format for still image compression.
Internet Message Access Protocol (the latest version is IMAP4)
is a standard client/server protocol for accessing email from
Terms and definitions
191
This is the Internet version of the user’s guide. © Print only for private use.
MBM
MP3
Multiple Bit Map. Symbian OS bitmap format.
MPEG-1 Audio Layer-3 is a standard technology and format for
compression a sound sequence into a very small file (about one-
twelfth the size of the original file) while almost preserving the
original level of sound quality when it is played.
MeT
Mobile Electronic Transactions. An initiative founded by
Ericsson, Nokia and Motorola to establish a secure and
consistent framework for mobile transactions.
MPEG-4
The Moving Picture Experts Group, develops standards for
digital video and digital audio compression. It operates under
the auspices of the International Organization for
Standardization (ISO). MPEG-4 goes far beyond compression
methods. Instead of treating the data as continuous streams,
MPEG-4 deals with audio/video items that can be manipulated
independently, allowing for interaction with the coded data and
providing flexibility in editing. MPEG-4 supports a wide range
of audio and video modes and transmission speeds.
MIDI
MIDI (Musical Instrument Digital Interface) is a protocol
designed for recording and playing back music on digital
synthesizers that is supported by many makes of personal
computer sound cards.
MIME
Multipurpose Internet Mail Extensions. A protocol defining
how messages are sent on the Internet. For example, MIME is
used to describe how attachments are encoded and what type of
data they contain.
OS
Operating System, such as Symbian OS, Linux, Microsoft
Windows.
MMS
Multimedia Messaging Service. Logical extension of SMS and
EMS. MMS defines a service enabling sound, images and video
to be combined into multimedia messages. It supports photo
quality pictures, and sounds in WAV, MIDI, AMR, or Melodies
format.
OTA
Over The Air. A technology for transmission and reception of
application related configuration information in a wireless
communications system.
PC
Personal Computer.
192
Terms and definitions
This is the Internet version of the user’s guide. © Print only for private use.
PCS
POP3
Personal Communications Services, often used to describe GSM
1900 networks.
Post Office Protocol 3 is a standard client/server protocol for
receiving email. The email is received and held for you by your
POP server. Periodically, the P910i Messages application can
check your mail-box on the server and download any mail.
PDA
Personal Digital Assistant. A handheld computer having
functions such as address book, calendar, and so on.
Protocol
In information technology, a protocol is the special set of rules
that end points in a telecommunication connection use when
they communicate. Protocols exist at several levels in a
telecommunication connection.
PDF
Portable Document Format. A format created by Adobe for
storing and distributing documents.
Phone book
QQVGA
A memory in the SIM card where phone numbers can be stored
and accessed by name or position.
Quarter Quarter VGA, 160 x 120 pixels.
QVGA
PIM
Quarter VGA size, typically refers to a portrait oriented screen
240 pixels wide x 320 pixels high.
Personal Information Management. Generic term for
applications such as Contacts, Calendar, Tasks, and so on.
RS232
PIN
A standard for serial transmission between computers and
peripheral devices
A PIN is a personal identification number.
PNG
SC
Portable Network Graphics. Format for storing images on file
with data compression but without lowering of quality (loss of
information).
Service Centre (for SMS).
Service Provider
A company that provides services and subscriptions to mobile
phone users.
Terms and definitions
193
This is the Internet version of the user’s guide. © Print only for private use.
SGML
TCP/IP
A generic markup language for representing documents.
Transmission Control Protocol/Internet Protocol. TCP/IP is the
basic communication language or protocol of the Internet. It can
also be used as a communications protocol in a private network
(either an intranet or an extranet).
SIM
A SIM (Subscriber Identity Module) card is a ‘smart card’,
inserted into GSM phones, that contains your phone account
information. SIM cards can also be programmed to display
custom menus for personalized services, for instance to assist
operators in providing mobile commerce applications.
TLS
Transport Layer Security. Used by Web browsers, for example.
URL
SMIL
Uniform Resource Locator. Points to a service or information on
the Internet, for example: http://www.SonyEricsson.com
Synchronized Multimedia Integration Language. Used by MMS
to describe how media items are to be played.
USB
SMS
Universal Serial Bus. A plug-and-play interface between a
computer and add-on devices (such as audio players, joysticks,
keyboards, phones, scanners, and printers). With USB, a new
device can be added to your computer without having to add an
adapter card or even having to turn the computer off.
Short Message Service. Allows messages of up to 160
characters to be sent and received via the network operator's
message centre to a mobile phone.
SMTP
Simple Mail Transfer Protocol. Protocol used to send email
from an email client via an SMTP server.
USSD
Unstructured Supplementary Services Data. Narrow-band GSM
data service. For example entering *79*1234# might return the
stock price for stock 1234.
SWIM
A SWIM card is a SIM card containing a WIM.
vCal; vCalendar
vCalendar defines a transport and platform-independent format
for exchanging calendar and scheduling information for use in
SyncML
SyncML is a universal protocol for data synchronization,
developed by the SyncML Initiative Ltd.
194
Terms and definitions
This is the Internet version of the user’s guide. © Print only for private use.
PIMs/PDAs and group schedulers. vCalendar is specified by
IETF.
used for Internet access, including email, the World Wide Web,
and newsgroups.
vCard
WAV
vCard automates the exchange of personal information typically
found on a traditional business card, for use in applications such
as Internet mail, voice mail, Web browsers, phone applications,
call centres, video conferencing, PIMs /PDAs, pagers, fax,
office equipment, and smart cards. vCard is specified by IETF.
A Wave file is an audio file format, created by Microsoft, that
has become a standard PC audio file format for everything from
system and game sounds to CD-quality audio. A Wave file is
identified by a file name extension of WAV (.wav).
WBXML
VGA
Wireless Binary Extensible Markup Language.
Video Graphics Array. Graphics standard introduced by IBM,
having a resolution of 640 x 480 pixels.
WIM
The Wireless Identity Module is a data module for electronic
identity certificates. It can contain both trusted and client
certificates, private keys and algorithms needed for WTLS
handshaking, encryption, decryption, and signature generation.
The WIM module can be placed on a SIM card, called a SWIM
card.
VPN
Virtual Private Network. A private network that is configured
within a public network. A VPN appear as private national or
international network to the customer, but physically shares a
backbone trunk with other customers. VPNs enjoy the security
of a private network via access control and encryption, while
taking advantage of the economies of scale and built-in
management facilities of large public networks. Today, there is
tremendous interest in VPNs over the Internet, especially due to
the constant threat of hacker attacks.
WML
Wireless Markup Language. A markup language used for
authoring services, fulfilling the same purpose as HyperText
Markup Language (HTML) does on the World Wide Web
(WWW). In contrast to HTML, WML is designed to fit small
handheld devices.
WAP
Wireless Application Protocol is a specification for a set of
communication protocols to standardise the way that wireless
devices, such as cellular phones and radio transceivers, can be
Terms and definitions
195
This is the Internet version of the user’s guide. © Print only for private use.
WTLS
Wireless Transport Layer Security. Part of WAP, WTLS
provides privacy, data integrity and authentication on transport
layer level between two applications.
W3C
The main standards body for the WWW.
xHTML
Extensible Hypertext Markup Language. A reformulation of
HTML 4.01 in XML. Being XML, means that XHTML can be
viewed, edited, and validated with standard XML tools. At the
same time, it operates as well as or better than HTML 4 in
existing HTML 4 conforming user agents.
XML
Extensible Markup Language. An initiative from the W3C
defining an ‘extremely simple’ dialect of SGML suitable for use
on the WWW.
196
Terms and definitions
This is the Internet version of the user’s guide. © Print only for private use.
Technical data
General
Screen
Product
Size
P910i standard version, Latin character set
115 x 57 x 26 mm
Screen type
Screen size
TFT
Flip closed: 208 x 208 pixels, 40 x 40 mm
Flip open: 208 x 320 pixels, 40 x 61 mm
Weight
155 grams with battery and flip.
Pixel size
0.192 x 0.192 mm, or 132 ppi (Pixels Per Inch)
System and power class E-GSM 900 Class 4
GSM 1800 Class 1
Colour resolution 18-bit (262 144 colours)
GSM 1900 Class 1
Screen surface
Illumination
Touch-sensitive
Antenna
Built in
Variable intensity back-light
Speech Coding
HR, FR, EFR supported where available,
for high speech quality.
Third Party Application Support
SIM Card
Small plug-in card, 3V or 5V type
SDKs
C++, PersonalJava™ , J2ME CLDC/MIDP 2.0,
AppForge™ Microsoft Visual Basic 6 and .NET
Operating System
Symbian OS v7.0 with UIQ user interface
and applications environment
Load formats
C++, Java or VB applications in Symbian SIS
format.
MIDP installation (JAR/JAD) from Browser or
connected PC.
Processor
ARM 9
Internal User storage
For settings, user data (for example images,
contacts, messages) and third-party
applications: up to 64 MB
Security
Support for signed applications.
Additional storage
Memory Stick Duo, up to 128 MB
supported. Memory Stick PRO Duo, up to
1 GB supported. 32 MB Memory Stick
Duo supplied, plus adapter.
Bluetooth wireless technology
Bluetooth compatibility
statement
This product is manufactured to comply
with the Bluetooth specification 1.1.
Operating temperature
–15° to +55° C
Coverage area
Up to 10 metres (33 feet)
Technical data
197
This is the Internet version of the user’s guide. © Print only for private use.
Infrared transceiver
Phone
Data transmission rate
Max speed between phone and IrDA
device (that is a PC or another phone)
SIR: up to 115,200 bps
Personal ring Sound clips as personal ring tones and default ring
tones -
tone:
supported
formats
MP3, AMR, AU, iMelody, MIDI, RMF (Beatnik)
and WAV.
GPRS Maximum Data Rates (kbps)
Integrated CommuniCorder
CS-1
CS-2
CS-3
CS-4
9.05 kbps 13.4 kbps 15.6 kbps 21.4 kbps
Image size
640 x 480 pixels (VGA)
320 x 240 pixels (QVGA)
160 x 120 pixels (QQVGA)
176 x 144 pixels (QCIF) (video)
4 + 1 Rx 36.2
Tx 9.05
53.6
13.4
62.4
15.6
85.6
21.4
Colour depth
24 bit (16 million colours)
Speed achieved depends on the Coding Scheme supported by
the GSM Network.
Storage format
Still pictures: JPEG/JFIF, 3 quality (compression)
levels, user-selectable.
Video: 3GPP/MPEG4 video with AMR sound.
HSCSD Maximum Data Rates (kbps)
9.6 kbps per time slot
2 + 1 Rx 19.2
14.4 kbps per time slot
Pictures (Image viewer)
28.8
14.4
Formats
BMP, GIF (including animated), JPEG, MBM, PNG,
Tx 9.6
WBMP
Sharing via
Infrared, Bluetooth wireless technology, MMS
message, e-mail, PC file transfer, Memory Stick
198
Technical data
This is the Internet version of the user’s guide. © Print only for private use.
Video player
Security
WTLS Class 1, 2, 3
WTLS Cipher RC5 with key length 128
TLS/SSL
File Format MP4 (MPEG4), 3GP (3GPP PSS)
Streaming
transport
RTSP according to 3GPP
TLS Cipher RC4 with key length 128
SignText
WIM
WIM interface including SIM-WIM (SWIM)
15 - 120kbyte user-configurable; 30kbyte default.
Cache
Music player
Content download OMA Download OTA ver 1.0
File Format
MP3, MP4, M4A,WAV, AAC, AU, AMR and
G-MIDI level 1 with 24 voices polyphony, RMF,
iMelody
SMS
Bearer
GSM and GPRS
Concatenated
Up to 255 messages
Integrated browser
Markup languages HTML 3.2 (excluding features not relevant to a
MMS
small screen device)
WML 1.3
WBXML
Image formats
BMP, GIF (including animated), JPG, WBMP,
PNG
xHTML Basic
xHTML Mobile Profile
cHTML
Audio formats
Video formats
3GPP, AMR, AU, iMelody, MIDI, MP3, RMF,
WAV
3GP (3GPP PSS), MP4 (receive only), Packet
video, SDP
WAP version
Scripting
2.0
Compiled WML scripts
WCSS
Style sheets
Images
EMS
BMP, WBMP, GIF (including animated), JPEG,
PNG
Supported items
Sounds, Melodies, Pictures, Animations
Technical data
199
This is the Internet version of the user’s guide. © Print only for private use.
Email
Incoming mail server support POP3, IMAP4
Outgoing mail server support SMTP
Content coding
Security
MIME compliant
SMTP authentication, SSL encrypted
IMAP4 and SMTP
Attachments
Receiving and sending
Document viewer and editor
Microsoft® Word
Microsoft® Excel
Adobe® Acrobat® (PDF)
Note The installed viewer for Microsoft Word documents
cannot be used to view files in Rich Text format (.RTF)
200
Technical data
This is the Internet version of the user’s guide. © Print only for private use.
Index
A
Battery
- charging 13
Call list 47
Cell information 164
Certificate manager 166
Chess 85
Accented letters
- handwriting 2, 35
Accepted callers 55
Accessories 24
Add to contacts 54
Alarm tones 146
Alarms 121
Call waiting 55
Calling cards 56
Calls
- information 185
- inserting 12
- removing 12
CommuniCorder
- conference 46
- diverting 54
- emergency 42
- flip closed 40
- flip open 43
- incoming 44
- international 41
- making 40, 43
- options 43, 45
- preferences 53
- rejecting 42, 45
- restricting 55
- retrying automatically
44
- recording video clips 59
- settings 63
- taking pictures 61
Conference calls 46
Connecting
- bluetooth share 138
- headphone 137
- pairing 136
- passcodes 138
Bookmarks 81
Browser view 78
Browsing the internet 77
ALS
- settings 58
- support 51
- via Bluetooth wireless
technology 136
Antenna 184
- via infrared port 135
- via SyncStation 134
Connection type 171
Connectivity software 134
Contacts 101
AoC - Call meter settings 57
Application shortcuts 144
Applications
C
- flip closed 15
- installing 131
- overview 25
Cable 154
- adding images 145
- creating and managing
contacts 104
Calculator 118
Calendar 108
- creating entries 108
- managing entries 109
- preferences 110
- sending and receiving
entries 110
- removing 133, 169
Area information 164
Attachments 95
- to add a contact 103
- to delete a contact 103
Content and application CD
130
Control panel 147
Corporate phone services 51
- set up 57
- speed dialling 44
- two or more 45
- voice control 53
Camera
- settings 63
Care instructions 184
B
Backgrounds 144, 148
Backing up data 142
Calibrate 148
Call costs 57
Index
201
D
- flip keyboard 36
- flip open 33
- handwriting 34
- keyboard on the screen
34
Handwriting recognition 34
- accented letters 2, 35
- extended characters 36
- letters 2, 35
- signing documents 81
- user authentication
request 81
Data backup 142
Data restore 143
Data storage 31
Date settings 119
Demo application 25
Device lock 38, 179
Dial-Up Networking Wizard
175
Disk formatting 166
Display 147
Disposing of the battery 186
Diverting calls 54
Drawing pictures 115
Driving 184
Introduction to P910i 9
IP security manager 166
- numbers 2, 35
Extended characters
- handwriting 36
Help texts 31
J
I
Jog Dial 19
Jotter 114
F
Icons 21
File manager 126
First time start-up 14
Flip
Image status 62
entries 14
Incoming call picture 53
Incoming calls 44
Increasing ring 150
Indicator light 179
Indicators 21
Infrared 135, 155
Inserting symbols 32
Installing applications 131
International calls 41
International settings 149
Internet 77
- creating and editing
notes 114
- drawing pictures 115
- managing notes 115
- sending and receiving
notes 115
- virtual 17
Flip closed 15
Flip open 16
Folders 28
Folders in Messages 88
Formatting disks 166
DTMF 49
K
- turning on 43
Key functions 118
Key lock 39
Keyboard
- flip keyboard 36
- on screen 34
Keypad functions 20
E
Editing
- spreadsheets 123
- Word documents 123
Efficient use 184
E-mail 87, 94, 160
Emergency calls 42
EMS 89
G
Games 85
General functions 28
Getting help 31
GPRS 171, 176
L
- accounts 155
Languages 167
Letters
- handwriting 2, 35
Light intensity 144
- bookmarks 81
- browser view 78
- browsing 77
Entering text
H
- flip closed 32
Handsfree 54
202
Index
This is the Internet version of the user’s guide. © Print only for private use.
Local synchronization 139
Locations 120
Lock problems 178
Locks 37
Modem 174
Multimedia messages 87, 90
Music player 73
Pdf documents
- viewing 122
Personalizing your P910i
144
Phone book
- importing entries 14
Pictures 64
Ring volume 150
S
SAR 184
N
Screen areas 18
Screen saver 145
Secure tokens 168
Security information 166
Self timer - picture 62
Self timer - video 60
Send as 30
Sending notes 115
Service provider 171
Services 25
- device 38
- key lock 39
- SIM card 37
Navigation 17
Notes 114
- managing 115
- sending and receiving
115
- drawing 115
65
M
Making a call 102
Media buffer 71, 72
Medical Devices 185
Memory Stick Duo 22
- adapter 23
- taking 61
Numbers
- viewing 64
PIN 37
PIN2 38
- formats 120
- handwriting 2, 35
- formatting 166
Messages
Settings 31
PUK 37
O
Off 14
On 14
Online services 128
Options menu 16
Owner card 107
Setup Wizard 14
Shortcuts 170
Silent mode 48
SIM card 12
SIM card lock 37
SMS 87, 89, 162
Solitaire 86
Sony Ericsson Update
Service 133
Sound files
- accounts 89, 159
- attachments 95
- e-mail 94
- MMS 90
- multimedia messages
90
Q
Quickpoint
- viewing 122
R
Radio Frequency 184
Recording sounds 116
Remote synchronization 141
Removing applications 133
Restoring data 143
Restricting calls 55
Retry to call 44
P
- SMS 89
P910i Locks 37
P910i overview 11
P910i package 10
PC connectivity software
134
- text messages 89
Messaging
- accounts 89, 159
MMS 87, 163
Mobile music 73
- loop 74
- managing 74
- playing 73
PC Suite for P910i 129
Ring signals 145
Index
203
Sound notification 146
Sound recorder 116
Sound recordings 116
- sending and receiving
117
T
V
Word documents
- viewing 122
-editing 123
T9® text input 32
Tasks 111
Technical data 197
Text input 32, 149
Text messages 89
Themes 144
Vibrating alert 45, 48, 150
Video 59, 68
Video clips
Z
- downloading 71
- managing 69
- playing 68
Zoom the screen 31
Zooming 29
- using as ring signals
117
Sounds and alerts 149
Speakerphone 48
Speed dial
Time 119
- saving 70
- sending and receiving
70
- alarms 121
- locations 120
- number formats 120
- settings 119
- making a call 44
- set-up 48
Video status 61
Viewing
Spreadsheets
- workdays 120
Time & date settings 166
Tone based services 49
Touchscreen lock 39
Transfer items with Send As
30
Troubleshooting 178
TTY settings 57
TTY support 50
Turning on and off 14
- pdf documents 122
- Quickpoint 122
- spreadsheets 122
- Word documents 122
Virtual flip 17
Voice control 53
- making a call 41
Voice mail 56
Volume
- editing 123
- viewing 122
Standby view 15
Start-up 14
Storage Manager 182
Storage manager 169
Storage Wizard 182
Storing data 31
Streaming 70
- changing 43
Symbols 32
Synchronization
- local 139
U
W
Uninstalling applications
133, 169
Updating the software 133
User greeting 152
Wallpaper 144, 148
WAP accounts 165
Warranty 186
- remote 141
WIM management 170
204
Index
|