SL56
User Guide
Guide De L'Utilisateur
Guia Para El Usuario
ts
Insert SIM card/battery ........... 17
Switching on your phone
so
t the
this
uide
Security .................................... 23
Writing/
Receive MMS ..........................56
Read MMS ..............................56
Lists .......................................57
Speakerphone ........................ 28
Swap ..................................... 28
Multi Party ............................. 30
See also Index at the end of this User Guide
2
Contents
Ten Driving Safety Tips ...........139
Intellectual Property ...............141
Index .......................................142
Network ................................. 87
Appointments ........................ 96
Tasks ..................................... 98
Notes ..................................... 99
See also Index at the end of this User Guide
3
Safety precautions
re-
NOTE:
Caution! SIM card may be
removed. Small parts could be
swallowed by children.
Review these operating instructions and
safety precautions carefully before use.
Do not use mobile phone in hos-
pitals or in the vicinity of medical
devices, such as pacemakers or
hearing aids. Mobile phones
may interfere with the operation
of these devices. Keep a mini-
mum distance of 6–8" between
pacemaker and mobile phone.
When using the mobile phone
hold it to the ear farthest from
the pacemaker.
Do not exceed the mains volt-
age (V) specified on the power
supply unit.
Do not use an optical magnifier
to look at the activated infrared
interface [Class 1 LED product
(classification as per
IEC 60825-1)].
Only use original Siemens bat-
teries (100% mercury-free) and
charging devices. Use of non-
Siemens batteries and/or charg-
ing devices may cause explo-
sion resulting in serious injury or
property damage.
Always use the handsfree kit to
make calls while driving
(p. 131).
Turn off mobile phone while
aboard any aircraft. To prevent
accidental activation, see (p. 92).
It is recommended that you
open the phone only to replace
the battery (100% mercury-free)
or SIM card. Do not open the
battery under any circum-
stances. Any other changes to
this device may invalidate the
FCC authorization required for
operation of the unit, and are
strictly prohibited.
Do not use mobile phone near
gas stations, fuel depots, chem-
ical plants or blasting opera-
tions. Mobile phones may cause
interference with the operation
of technical installations.
The ring tone and hands-free
speaker arereproducedthrough
the earpiece. Never hold the
handset to your ear when the
handset is ringing or when using
the hands-free speaker mode.
Seriousand permanentdamage
could occur to your hearing!
Dispose of used batteries and
phones in accordance with
applicable laws and safety regu-
lations.
4
Safety precautions
Mobile phones may interfere
with the operation of nearby
TVs, radios or PCs.
For body worn operation, this
mobile phone has been tested
and meets FCC RF exposure
guidelines when used with a
carry accessory that contains no
metal and that positions the
handset at least 0.001 cm from
the body. Use of other carry
accessories may not ensure
compliance with FCC RF expo-
sure guidelines.
Only use original Siemens
accessories in order to avoid
possible injury and property
damage and to ensure compli-
ance with applicable laws and
regulations.
Improper use invalidates the warranty!
5
Safety Information
for-
Driving
Important
Read this information before using
your wireless handheld phone.
Laws pertaining to the use of mobile
phones while driving vary signifi-
cantly from state-to-state and some-
times even from locality-to-locality
within states. For example, some
areas may allow persons to use their
mobile phones only if they employ a
hands-free device, and some areas
may prohibit the use of mobile
phones entirely. Accordingly, Sie-
mens recommends that persons
check the laws for the areas in which
they drive or will be driving. For
areas where the use of mobile
phones while driving is permitted,
Siemens encourages persons to use
their phones responsibly and to
employ hands-free devices. Also, if
using your phone while driving,
please:
As this mobile phone is equipped
with a fixed (non-retractable)
antenna, some paragraphs in the
below text may not be applicable.
Antenna care
Use only the supplied or an approved
replacement antenna. Unauthorized
antennas, modifications, or attach-
ments could damage the phone and
may violate FCC regulations.
Phone operation
Normal position
Hold the phone as you would any
other telephone with the antenna
pointed up and over your shoulder.
• Give full attention to driving – driving safely
is your first responsibility;
Tips on efficient operation
• Use hands-free operation, if available;
For your phone to operate most effi-
ciently:
• Pull off the road and park before making or
require.
• Extend your antenna fully (if applicable).
• Review the Ten Driving Safety Tips set
forth on p. 139.
• Do not touch the antenna unnecessarily
when the phone is in use. Contact with the
antenna affects call quality and may cause
the phone to operate at a higher power
level than otherwise needed.
6
Safety Information
For vehicles equipped with
Air Bags
Persons with pacemakers
• should ALWAYS keep the phone more
than six inches from their pacemaker
when the phone is turned ON;
An air bag inflates with great force.
DO NOT place objects, including
either installed or portable wireless
equipment, in the area over the air
bag or in the air bag deployment
area. If in-vehicle wireless equip-
ment is improperly installed and the
air bag inflates, serious injury could
result.
• should not carry the phone in a breast
pocket;
• should use the ear opposite the pace-
maker to minimize the potential for interfer-
ence;
• should turn the phone OFF immediately if
there is any reason to suspect that interfer-
ence is taking place.
Electronic devices
Hearing Aids
Most modern electronic equipment
is shielded from radiofrequency (RF)
signals. However, certain electronic
equipment may not be shielded
against the RF signals from your
wireless phone.
Some digital wireless phones may
interfere with some hearing aids. In
the event of such interference, you
may want to consult your service
provider or your hearing aid manu-
facturer to discuss alternatives.
Pacemakers
Other Medical Devices
The Health Industry Manufacturer’s
Association recommends that a min-
imum separation of six inches (6”) be
maintained between a handheld
wireless phone and a pacemaker to
avoid potential interference with the
pacemaker. These recommenda-
tions are consistent with the inde-
pendent research by and recommen-
dations of Wireless Technology
Research.
If you use any other personal medi-
cal devices, consult the manufactur-
ers of your devices to determine if
they are adequately shielded from
external RF energy. Your physician
may be able to assist you in obtain-
ing this information.
Turn your phone OFF in health care
facilities when any regulations
posted in these areas instruct you to
do so. Hospitals or health care facili-
ties may be using equipment that
could be sensitive to external RF
energy.
7
Safety Information
Vehicles
Potentially explosive atmo-
spheres
RF signals may affect improperly
installed or inadequately shielded
electronic systems in motor vehicles.
Check with the manufacturer or its
representative regarding your vehi-
cle. You should also consult the
manufacturer of any equipment that
has been added to your vehicle.
Turn your phone OFF when in any
area with a potentially explosive
atmosphere and obey all signs and
instructions. Sparks in such areas
could cause an explosion or fire
resulting in bodily injury or even
death.
Areas with a potentially explosive
Posted Facilities
Turn your phone OFF in any facility
where posted notices so require.
atmosphere are often but not always
clearly marked. They include: fueling
areas such as gasoline stations;
below deck on boats; fuel or chemi-
cal transfer or storage facilities; vehi-
cles using liquefied petroleum gas
(such as propane or butane); areas
where the air contains chemicals or
particles, such as grain, dust or metal
powders; and any other area where
you would normally be advised to
turn off your vehicle engine.
Airplanes
FCC and Airline Regulations prohibit
using your phone while in the air.
Turn your phone OFF before board-
ing an airplane.
Check and comply with the policy of
your airline regarding the use of your
phone while the airplane is on the
ground.
Emergency calls (SOS)
Your wireless phone can be used to
make emergency calls. You can
make an emergency call from the
main display screen. Enter the local
emergency number such as 911 and
Blasting areas
To avoid interfering with blasting
operations, turn your phone OFF
when in a “blasting area” or in areas
posted: “Turn off two-way radio.”
Obey all signs and instructions.
A
then press the key.
This phone, like any wireless phone,
operates using radio signals, wire-
less and landline networks, and user-
programmed functions. Because of
this, connections in all conditions
cannot be guaranteed. Therefore,
you should never rely solely on any
wireless phone for essential commu-
8
Safety Information
nications (for example, medical
emergencies). Remember - to make
or receive any calls, the phone must
be switched on and be used in a ser-
vice area that has adequate signal
strength. Emergency calls might not
be possible on all wireless phone
networks or when certain network
servicesorphonefeaturesare in use.
Check with local service providers
regarding their network features.
Always make certain that your
phone is properly charged before
attempting any emergency calls. If
you allow your battery to discharge,
you will be unable to receive or make
calls, including emergency calls. You
must then wait a few minutes after
the charging begins to place any
emergency calls.
When making an emergency call,
remember to give all of the neces-
sary information as accurately as
possible. Remember that your wire-
less phone might be the only means
of communication at the scene of an
accident, therefore you should not
terminate the call until given permis-
sion to do so.
9
SAR (Cell Phone Designation)
ll
RF EXPOSURE /SPECIFIC
power level, the actual SAR level of
the phone while operating can be
ABSORPTION RATE (SAR)
esig-
INFORMATION
well below the maximum value. This
is because the phone is designed to
operate at multiple power levels so
as to use only the power required to
reach the network. In general, the
closer you are to a wireless base sta-
tion, the lower the power output.
Before a phone model is available for
sale to the public, it must be tested
and the manufacturer must certify to
the FCC and Industry Canada that it
does not exceed the limit estab-
lished by each government for safe
exposure. The tests are performed in
positions and locations (e.g., at the
ear and worn on the body), reported
to the FCC and available for review
by Industry Canada. The highest SAR
value for this model phone when
testest for use at the ear is
THIS SIEMENS SL56 PHONE MEETS
THE GOVERNMENT'S REQUIRE-
MENTS FOR EXPOSURE TO ELECTRO-
MAGNETIC FIELDS.
Your cell phone is a radio transmitter
and receiver. It is designed and man-
ufactured not to exceed the emission
limits for exposure to radio fre-
quency (RF) energy established by
the Federal Communications Com-
mission (FCC) of the U.S. Govern-
ment and by Health Canada. These
limits are part of comprehensive
guidelines and establish permitted
levels of RF energy for the general
population. The guidelines were
developed and confirmed by inde-
pendent scientific organizations
through periodic and thorough eval-
uation of scientific studies*. The
standards include a substantial
safety margin designed to assure the
safety of all persons, regardless of
age and health.
The exposure standard for cell
phones employs a unit of measure-
ment known as the Specific Absorp-
tion Rate, or SAR. The SAR limit
established by the FCC and by Health
Canada is 1.6 W/kg**. Tests for SAR
are conducted using standard oper-
ating positions accepted by the FCC
and by Industry Canada with the
phone transmitting at its highest cer-
tified power level in all tested fre-
quency bands. Although the SAR is
determined at the highest certified
1.20 W/kg***
and when worn on the body+ is
1.11 W/kg***
Additional information on Specific
Absorption Rates (SAR) can be found
on the Cellular Telecommunications
Internet Association (CTIA) web-site
at www.phonefacts.net or the Cana-
dian Wireless Telecommunications
Association (CWTA) website
www.cwta.ca.
SAR information on this Siemens
SL56 phone is on file with the FCC
and can be found under the Display
Grant section of
http://www.fcc.gov/oet/fccid
after searching on FCC ID PWX-SL56.
10
SAR (Cell Phone Designation)
While there may be differences
between the SAR levels of various
phones and at various positions, all
Siemens products meet the govern-
mental requirements for safe RF
exposure.
+
For body worn operation, this
mobile phone has been tested
and meets FCC RF exposure
guidelines when used with a
carry accessory that contains no
metal and that positions the
handset at least 0.001 cm from
the body. Use of other carry
accessories may not ensure
compliance with FCC RF expo-
sure guidelines.
*
The World Health Organization
(WHO, CH-1211 Geneva 27,
Switzerland), on the basis of the
actual knowledge, does not see
any necessity for special precau-
tionary measures when using
cell phones.
Further information:
www.who.int/peh-emf,
www.mmfai.org,
www.my-siemens.com.
** averaged over 1 g of tissue.
***SAR values may vary depending
on national requirements and
network bands. SAR information
for different regions can be
found at www.my-siemens.com
11
Overview of the phone
w of
e
c Loudspeaker
d Display icons
Signal strength/GPRS available/battery level.
e Control key
See next page.
_
ª
g
Service provider
f Input keys
Numbers, letters.
04/25/2003 12:30
d
Menu
g Microphone
h Integrated antenna
Do not interfere unnecessarily with the phone
above the battery cover. This reduces the sig-
nal quality/signal strength.
i Dictation key
(in standby mode):
Hold down: record.
Press briefly: play back.
j Plus/minus side key
• During a call: volume loud-quiet.
• In menus, lists and WAP pages: scroll up
and down.
• In standby mode:
Press side key at top briefly: show profile
selection. Hold down key at bottom: start
voice control.
k Infrared interface
(IrDA, e.g. for communication between
PC/PDA and cell phone).
l Device interface
Connection for charger, headset etc.
12
Overview of the phone
c Soft keys
The current functions of these keys are shown
in the bottom line of the display as §text§ or
symbols (e.g. d).
_
ª
g
d Control key
In the main menu:
Service provider
04/25/2003 12:30
I
Navigation.
In lists and menus:
d
Menu
G
Scroll up/down.
Select function.
Menu level back.
D
C
During a call:
D
Open call menu.
In standby mode:
E
Voice control (hold down).
Open Address/Phonebook.
Open menu.
F
D
C
GPRS info.
A
e
Call key
Dial phone number/name displayed, take
calls. Shows last 10 phone numbers dialed in
standby mode.
13
Overview of the phone
B On/Off/End key
c
• Switched off: hold down to switch on.
• During a conversation or in an application
(except for Surf&Fun): press briefly
to finish.
• In menus: press briefly to go back a level.
Hold down to go back to standby mode.
• In standby mode: if the keylock is disabled,
hold down to switch off the phone if the key-
pad is closed.
_
ª
g
Service provider
04/25/2003 12:30
d
Menu
• Keylock in standby mode, keypad closed:
press briefly to lock keypad.
Press briefly and confirm with §OK§ to
unlock the keypad.
*
d
Hold down
• In standby mode: switch all audible signals
on/off (except alarm).
• For incoming calls: only switch off ring
tones.
#
e
Hold down
• In standby mode: Lock or unlock keys.
Note
Your phone's display is delivered with a protective film.
Remove this film before getting started.
14
Overview of the phone
Open keypad:
• Light on.
• Keypad unlocked.
• Opening melody on (if set).
• The call is accepted.
• Alarm sound off (appointment, alarm).
Close keypad:
• Back to standby mode.
• Light off.
• Keypad locked (if set).
• Closing melody on (if set).
• The call is ended.
• The call is rejected.
• Alarm sound off (appointment, alarm).
15
Display symbols (selection)
sym-
ec-
Display symbols
No network access.
²
Signal strength.
Charging.
_
h
d
Function activated/deactivated.
Phonebook/Addressbook.
p,o
N
Battery charging status.
ABC/
Abc/
abc
Indicates whether upper or lower-
case letters are active.
Standard directory
(Phonebook/Addressbook).
è
Text input with T9.
Call lists.
Z
™
ꢀ
Surf & Fun.
Organizer.
É
IrDA activated.
ç
]
~
[
IrDA during transmission.
Activated and available.
Registered.
¬
Messages.
Profile.
«
ª
Extras.
GPRS Download.
WAP online.
©
File system.
Settings.
Ñ
Ê
m
n
WAP via GPRS online.
WAP No network.
Headset mode.
Ë
All calls are forwarded.
Ringer off.
Ì
j
ꢀ
k
Short ring (beep) only.
±
Auto answer feature on.
Ringer only if caller is stored in the
Phonebook/Addressbook, or is a
member of a group.
l
Organizer/Extras symbols
Memo.
u
Call.
Ø
Ö
v
Alarm set.
Alarm clock activated.
Appointment.
w
µ
Dictating mach./Voice memory.
Key lock activated.
x
{
Phone numbers/names:
On the SIM card.
Birthday.
¢
¡
v
Alarm clock/stopwatch.
y/æ
On the SIM card (PIN 2 protected).
In the phone memory.
16
Display symbols (selection)
Soft keys
]
Message received.
\
ꢁ
—
–
Voice mail received.
Data received.
Picture received.
Melody received.
Unanswered call.
ꢂ
Store in Phonebook/Address-
book.
ꢃ
Retrieve from Phone/Address-
book.
·
Change Phonebook/Address-
book.
O
17
Getting started
• Insert the battery in the lower edge
,
q
Insert SIM card/battery
then press downwards until it engages.
r
The service provider supplies you
with a SIM card on which all the
important data for your line is
stored. If the SIM card has been
delivered in credit-card size, snap the
smaller segment out and remove
any rough edges.
r
q
• Press the lock n, then remove the battery
upwards in the direction of the arrow
.
o
n
Remove SIM card
o
Remove the battery. First push the
SIM card gently through the slot
s
for the holder and at the same time
lift it up slightly on the other side.
t
Then remove the SIM card
completely.
s
• Insert the SIM card in the opening with the
contact area facing downwards and push
gently until it engages below the holder
(make sure the angled corner is in the cor-
t
rect position ).
p
Additional information
Always switch off the phone before remov-
ing the battery!
Only 3V SIM cards are supported. Please
contact your service provider, if you have
an older card.
p
Functions with SIM card..................p. 122
18
Getting started
Charge icon not visible
Charge battery
If the battery is totally discharged, no
charge icon is displayed when the
charger is plugged in. It will appear
after two hours at most. In this case
the battery is fully charged after
3–4 hours.
The battery is not fully charged
when delivered. Plug charger cable
into the bottom of the phone, plug
power supply unit into a power
socket power socket and charge for
at least two hours.
Only use the charger provided!
Display while in service
Charge level display during opera-
tion (empty-full):
a d g
A beep sounds when the battery is
nearly empty. The battery level is
only shown correctly during an
unbroken charging/discharging
cycle. You should therefore not
remove the battery unnecessarily and
where possible not finish the loading
process early.
Display when charging is in progress
h
During charging.
Charging time
An empty battery is fully charged
after about 2 hours. Charging is only
possible within the temperature
range 41 °F to 104 °F. At 41 °F above
or below, the charge icon blinks as a
warning. The mains voltage speci-
fied on the power supply unit must
not be exceeded.
Additional information
periods. This is normal and not dangerous.
Outside your own home network.....p. 118
Performance....................................p. 119
19
Switch on, off/PIN entry
n,
ntry
Activate/deactivate
Switching on your phone
Hold down On/Off/End key
to switch on or off.
for the first time
B
Contrast
Enter PIN
Set display contrast.
G
The SIM card can be protected with a
4–8 digit PIN.
Time/Date
Open keypad. Enter the
J
The clock can be set to the right time
once at start-up.
PIN using the number
keys. The characters
****
§Yes§
Press.
are shown, to ensure that
nobody can read your PIN
on the display. Correct
errors with §Clear.
Open keypad. First enter
the date (day/month/
year), then the time
(12 hours, including
seconds).
J
Please enter your
§OK§
Press. The time and date
are updated.
PIN:
* * * *
Time Zones
Clear
OK
Set the time zone for your area.
§OK§
Confirm entry with right
soft key. Logging on to
the network will take a
few seconds.
Select the required time
F
zone from list ...
... press to set.
Additional information
Additional information
If the battery is removed for longer than
seconds, the clock must be reset.
Additional clock settings....................p. 82
Change PIN ......................................p. 23
Other network ...................................p. 88
SIM card problems.......................... p. 120
Clear SIM card barring......................p. 24
20
Switch on, off/PIN entry
Phonebook or Addressbook
Emergency number
(SOS)
You can choose whether you want
to use the Phonebook on the SIM card
or the internal Addressbook as stan-
dard.
Only to be used in real emergencies!
By pressing the soft key §SOS§, you
can make an emergency call on any
network without a SIM card and with-
out entering a PIN (not available in
all countries).
You can copy the SIM card Phone-
book to the Addressbook on the
phone. Please do not interrupt this pro-
cedure. During this time do not accept
the display.
To copy data on the SIM card at a
p. 117) and copy these with the
options menu p. 37).
_
g
Service provider
04/25/2003
12:30
You can change the standard phone-
book at any time (p. 35).
d
Menu
When the name of the service pro-
vider appears on the display, the
phone is in standby mode and ready for
use. If you now close the keypad, the
phone remains in standby mode.
Signal strength.
_
Strong receive signal.
^
A weak signal reduces the
call quality and may lead
to loss of the connection.
Change your location.
The left soft key may have different
functions pre-assigned.
Hold down the On/Off/End
B
key to return to standby
mode from any situation.
Additional information
SIM services (optional)...........p. 109
}
21
General instructions
This corresponds to:
User guide
The following symbols are used to
explain operation:
ons
_
g
n
Service provider
Enter numbers or letters.
J
04/25/2003
12:30
Menu
On/Off/End key.
d
B
Call key.
A
Press the control key on the
side indicated.
D
§Menu§
Open menu.
Soft keys.
< >
From standby mode: press
right soft key.
Displays a soft-key function.
§Menu§
Function dependent on ser-
Messages
5
É
L
vice provider, may require
o
è Z
special registration.
]
ç ~
Ñ m
[
Menu controls
The steps needed to reach a function
are shown in a condensed form in this
user guide, e.g. to display call list for
missed calls:
Favorit.
Select
§Menu§KZKMissed Calls
E
Call Log ZSelect.
Press top of control key.
22
General instructions
2 Call Log
Missed Calls
Office
+55523765489
Carol
Z
r
p
É
è
Z
ç ] ~
Ñ m
[
View
Options
Favorit.
Select
Scroll to the required
entry.
§Select§
Press.
F
Press right soft key to open the
Call Log submenu.
Press control key at the bot-
tom to scroll down.
Call Log
2-1
Z
q
Missed Calls
+55523765489
Carol
Z
Z Missed Calls
Z Received Calls
Z Dialed Calls
s
Service provider
Select
View
Options
§Select§
Press.
§View§
Press.
Press right soft key to open the
Missed Calls list.
Press left soft key to show
phone number with date, time
and number of calls.
n View
Carol
t
+55523765489
04/25/2003 12:30
§5§
OK Options
23
Security
§Select§
Press.
Codes
The phone and SIM card are pro-
tected against misuse by several
security codes.
J
Enter PIN.
Confirm input.
§OK§
§Change§ Press.
Keep these confidential numbers in a
safe place where you can access them
again if required.
§OK§
Confirm.
Change PIN
You can change the PIN to any
4–8 digit number you find easier to
remember.
PIN
Protects your SIM card (per-
sonal identification number).
PIN2
This is needed to set the charge
detail display and to access
additional functions requiring
special SIM cards.
J
§OK§
J
Enter current PIN.
Press.
PUK
PUK2
Key code. Used to unlock SIM
cards after the wrong PIN has
been entered repeatedly.
§OK§ Enter new PIN.
§OK§ Repeat new PIN.
,
J
,
Phone
code
Protects your phone. Must be
entered at the first security
setting.
Change PIN2
(display only if PIN 2 is available).
Proceed as with Change PIN.
§Menu§KmKSecurity
KSelect function.
PIN Control
The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature but you
risk unauthorized use of the phone.
Some service providers do not per-
mit deactivating the control.
24
Security
§Menu§KmKSecurity
KCodes
Chg.Phonecode
L
You define and enter the phone
code (4–8 digits) when you call up a
phone-code protected function for
the first time. It is then valid for all
phone-code protected functions.
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN), provided by
your service provider with the SIM
card, according to instructions. If the
PUK (MASTER PIN) has been lost,
please contact your service provider.
Additional information
Screensaver......................................p. 75
Keylock .............................................p. 78
Further security settings....................p. 86
25
My phone
e
Change your phone to match your
Where do I get what?
You can order additional ring tones,
logos and screensavers on the Inter-
net and receive them by SMS/MMS:
personal requirements.
Ring tones
Assign individual ring tones to caller
groups or for special dates (p. 77).
Animations, screensavers,
logos, applications
Adjust your phone in the following
ways to give it a personal touch and
Or you can download them direct via
WAP:
wap.my-siemens.com
Animations
Siemens City Portal
Choose a start-up and closing anima-
tion (p. 75) as well as a personal
greeting (p. 75).
Further applications, games and ser-
vices for your mobile phone (e.g. a
Photo Logo Composer to create per-
sonal pictures for your Addressbook)
can be found at:
Screensaver
Choose an analog clock or a personal
picture (p. 75).
(Provider) logo
The Siemens City Portal also provides
a list of countries in which these ser-
vices are available.
Choose an individual picture (p. 74)
Background image
Favorites
Create your own menu with fre-
quently used functions, phone num-
bers or WAP pages (p. 93).
Choose your own permanent back-
ground image (p. 74).
Applications
Download your own applications
from the Internet (p. 71).
Color scheme
Choose a color scheme for the entire
service system (p. 74).
26
Calling
Dialing with number keys Redial previous numbers
The phone must be switched on
(standby mode) and the keypad
must be open.
To redial the phone number last
called:
A
Press Call key twice.
Enter number (always
J
with area code, if neces-
To redial other numbers that were
dialed previously:
sary with international
dialing code).
A
Press the Call key once.
§Clear§ A short press clears
the last digit, a long press
clears the entire phone
number.
Pick out the required
phone number from the
list, then press ...
G
Press the Call key. The dis-
played phone number is
dialed.
A
A
... to dial.
Additional information
ꢃ Save phone number in Address-
End call
book/Phonebook .....................p. 36, p. 39
Press End key briefly. The
§Options§ Call lists............................p. 44
y menu§ Call menu.........................p. 30
§Forward§ Set forward......................p. 79
§Speaker.§ Speakerphone ................p. 28
Microphone on/off .............................p. 30
Voice dialing......................................p. 42
Auto Key Lock ...................................p. 78
B
call is ended. Press this
key even if the person on
the other end of the line
has hung up first.
Or
Close keypad.
Set volume
Using the plus/minus side key (press
top/bottom), adjust the volume
(only possible during a call).
Phone number transmission off/on
(Hide ID)............................................p. 79
International dialing codes...............p. 117
Phone number memo......................p. 119
Control codes (DTMF).....................p. 115
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.
27
Calling
When the number is busy Accept call
If the number called is busy or can-
not be reached because of network
problems, several options are avail-
able (depending on the service pro-
vider). An incoming call or any other
use of the phone interrupts these
functions.
The phone must be switched on
(standby mode). An incoming call
will interrupt any other use of the
phone.
If the keypad is closed, press the soft
key §Mute§ to disable the ringer for the
current call.
Either
i
Automatic Redial previous num-
bers
§Auto Dial§ Press. The phone number
is automatically dialed ten
times at increasing time
intervals. End with:
+5552764556
Reject
Answer
§Answer§ Press.
B End key.
Or
Or
A
Press.
Call back
Or
Open keypad.
L
§Call back§ Press. Your phone rings
when the busy number is
free. Press the Call key to
dial the number.
The phone number is displayed if
transmitted by the network. If the
caller's name appears in the Phone-
book or Addressbook, this will
appear instead of the number. If set,
a picture can be displayed instead of
the bell icon (p. 39).
Reminder
§Prompt§ Press. A beep reminds you
to redial the displayed
phone number after
Warning!
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ring tones!
15 minutes.
28
Calling
Use the plus/minus side key to regu-
Reject call
late volume.
§Reject§
Press. The call will be for-
warded if this has been
set previously (p. 79).
§Speaker.§ Deactivate.
Warning!
Or
To avoid damage to hearing always deac-
tivate "handsfree talking" before holding
the phone to your ear! This will avoid dam-
age to hearing!
You may notice a decrease in the overall
talk/standby time depending on the amount
of time the speakerphone is used.
B
Press briefly.
Or
Close keypad.
Additional information
ꢂ Missed calls............................... p. 44
Accept call using any key.................. p. 78
Switch off ringer ..............................p. 120
y menu§ Call menu ..........................p. 30
Swap
L
Speakerphone
You can put the phone aside during
a call. You can then hear the caller
via the loudspeaker.
Establish a second connection
You can call another number during
a call.
y menu§ Open call menu.
_
g
Hold
The current call is put on
hold.
v
v
Carol
_
g
Speaker. %menu
Connection put on hold
§Speaker.§ Activate handsfree
talking.
Back
§Yes§
Switch on.
Now dial the new number (Phone-
book/Addressbook F).
_
g
Speaker. %menu
29
Calling
When the new connection is estab-
lished:
Accept the waiting call by
pressing §Yes§.
Or
y menu§ Open call menu.
End the second call also
by pressing §No§.
Swap
Swap back and forth
between the calls.
• Reject waiting call
• End current call
§Reject§
Reject the waiting call.
End the current call and
B
press §Yes§. You are now
Or
connected to the caller.
§Forward§ The waiting call is for-
warded, for example,
to mailbox.
• End both calls
Close keypad.
• Accept the waiting call and end the
current call
Incoming calls during a call
During a call, you may be advised
that there is another call waiting.
You will hear a special tone during
this service with your service pro-
vider and set your phone accordingly
(p. 79).
End the current call.
B
§Answer§ Accept new call.
• End both calls
Close keypad.
You have the following
options:
• Accept the waiting call
§Swap§
Accept the waiting call
and put the current call on
hold. To swap between
the two calls, proceed as
above.
End call
B
Press the End key
.
The following is dis-
played: "Return to call on
hold?"
30
Calling
Multi Party
Call menu
L
Call up to 5 parties one by one and
link them together in a conference
call. Some of the functions described
may not be supported by your ser-
vice provider or may have to be
enabled specially. You have estab-
lished a connection:
The following functions are only
available during a call:
Swap
(p. 28)
(p. 28)
Hold
Microphone
Switch microphone on/off. If
switched off, the person on
the other end of the line
y menu§ Open menu and select
Hold. The current call is
put on hold.
Now dial a new number.
Also: *hold down.
J
When the new connec-
Speaker-
phone
(p. 28)
tion is established ...
y menu§ ... Open menu and select
Multi Party. The held call is
joined.
Volume
Adjust handset volume.
(See above)
Multi Party
Send DTMF
Repeat procedure until all partici-
pants are linked together (up to
5 participants).
(p. 115)
Durat/Char-
ges
Display call duration and
(if set, p. 46) costs accuring
during the connection.
End
All calls in the conference
Calltransfer
L
The original call is con-
nected to the second one.
For you, both calls are now
ended.
B
finish simultaneously
when the End key is
pressed.
Main Menu
Call Status
Or
Close keypad.
Access to main menu.
List all held and active calls
(e.g. conference call partici-
pants).
31
Text entry
y
Press once/repeatedly:
. ,? ! ’ " 0 - ( ) @ / : _
0
Enter text without T9
Press number key repeatedly until
the required letter appears. The cur-
sor will jump forward after a brief
interval. Example:
Hold down: Writes 0.
Writes blank. Press twice
= jumps a line.
1
Press briefly once for a,
2
twice for b etc. The first
letter in each name is
automatically written in
upper case.
Special characters
Press briefly. The symbols
chart is displayed:
*
Hold down to write the
number, in this case 2.
1
)
¿
’
¡
:
_
*
;
.
,
?
!
+
-
"
/
(
)
$
£
~
Ξ
Ä,ä/1-9
Special letters and num-
bers are displayed after
the relevant letters.
¤
{
¥
}
€
@ \
&
|
#
^
Ω
[
]
%
Λ
<
π
=
>
§
Γ
∆
Θ
§Clear§
Press briefly to delete the
letter before the cursor,
hold down to erase the
whole word.
Σ
Φ
Ψ
1) Line skip
G, H Navigate to character.
Move the cursor
(forwards/back).
H
§Select§
Press.
Press briefly: Swap
#
T9
between abc, Abc, abc,
Input menu
With text input:
T9
T9
Abc, ABC, 123. Status
shown in top line of dis-
play.
Hold down. The input
*
Hold down: All input modes
are displayed.
menu is displayed:
Text Format (SMS only)
Input language
Mark Text
Press briefly: Select special
characters.
*
Hold down: Open input
menu.
Copy
32
Text entry
Write a word using T9
Since the display changes as you pro-
ceed
Text input with T9
"T9" deduces the correct word from
the individual key entries by making
comparisons with an extensive dic-
tionary.
it is best if you finish a word without look-
ing at the display.
Simply press the keys once only
where the relevant letter is located.
For "hotel", for example:
Activate, deactivate T9
§Options§ Open text menu.
T9 Input Select.
press briefly for T9Abc then type
#
T9 Preferred
Select.
468 3 5
§Change§ Activate T9.
Press. A blank ends a
1
word.
Select Input language
Select the language in which you
want to compose your message.
Do not use special characters such as
Ä but write the standard character,
e.g. A; T9 will do the rest for you.
§Options§ Open text menu.
Additional information
T9 Input Select.
Entering a period finishes a
0
Input language
word, if it is followed by a
blank. Within a word, a period
represents an apostrophe or
hyphen:
Select.
§Select§
Confirm, the new lan-
guage is set. Languages
with T9 support are
e.g. §provider.s§ = provider’s.
Go to the right: Ends the word.
D
marked by the T9 symbol.
Press briefly: Swap between
T9 language versions
#
abc, Abc, ABC, T9abc, T9Abc,
T9ABC, 123. Status shown in
If you want to load a dictionary in another
language, you will find a large selection to
download from the Internet as well as
installation instructions under:
top line of display.
are displayed.
*
characters (p. 31).
Hold down: Open input menu
(p. 31).
33
Text entry
T9 word suggestions
Correct a word
If several options are found in the
dictionary for a key sequence
(a word), the most probable is dis-
played first. If the word you want has
not been recognized, the next sug-
gestion from T9 may be correct.
Words written with T9:
Move left or right,
H
word by word, until
the required word is
§highlighted§.
Scroll through the T9
»
The word must be §highlighted§.
Then press
word suggestions again.
§Clear§
Deletes the character to
the left of the cursor and
displays a new possible
word!
again. The displayed word
»
is replaced with a differ-
ent word. If this word is
also incorrect,
Words not written with T9:
press again. Repeat until
»
Move letter by letter to
the correct word is dis-
E
the left/right.
played.
§Clear§
Deletes the letter to the
left of the cursor.
If the word you want is not in the dic-
tionary, it can also be written with-
out T9.
Letters are inserted at the
cursor position.
J
™
SMS
At 8 we are
1
___
748
Additional information
Within a "T9 word", individual letters may
not be edited without first removing T9. In
most cases it is better to rewrite the com-
plete word.
Spell
»
To add a word to the dictionary:
®
T9 Text Input is licensed under one or more of
§Spell§ Select.
the following: U.S. Pat. Nos. 5, 818, 437, 5, 953,
541, 5, 187, 480, 5, 945, 928, and 6, 011, 554;
Canadian Pat. No. 1,331,057; United Kingdom
Pat. No. 2238414B; Hong Kong Standard Pat. No.
HK0940329; Republic of Singapore Pat. No.
51383; Euro. Pat. No. 0 842 463 (96927260.8)
DE/DK, FI, FR, IT, NL, PT, ES, SE, GB; and addi-
tional patents are pending worldwide.
The last suggestion is deleted and
the word may now be entered with-
out T9 support. Press §Save§ to add it
automatically to the dictionary.
34
Text entry
Text Modules
Text modules can be stored in the
phone for adding to your SMS mes-
sages.
Write text modules
§Menu§K]KText Modules
§Options§ Select New Text.
Write text module.
J
§Options§ Select Save.
Accept the default name
or give it a new name,
then save with §OK§.
Use text modules
Write message.
J
§Options§ Open text menu.
Select Text Modules.
G
Select text module from
the list.
G
§Select§
§Select§
Confirm. The text module
is displayed.
Confirm. The text module
is inserted in the message
to the right of the cursor.
35
èDefault Book
KSelect function.
ult §Menu§Kè
Businesscard
Create your own business card. Send
this by SMS or infrared to another
GSM phone or to a suitable PC/
printer.
Show Entries
Entries in the standard directory
(Addressbook or Phonebook) are
shown for selection.
If no business card has been created
yet, you will be asked for your input.
Select a name with the
first letter and/or scroll.
G
/
J
Move from field to field to
G
A
The number is dialed.
will find explanations of
these input fields on p. 39
and p. 40.
<New Entry>
Last name:
First name:
Phone:
E-mail 2:
URL:
Company:
Street:
Create new entry in standard
directory.
Phonebook (see p. 36)
Phone/office:
Phone/mobile: ZIP code:
Addressbook (see p. 39)
Fax:
Fax 2:
E-mail:
City:
Country:
Birthday:
Default Book
Select either Phonebook or Address-
book as your standard directory.
Your preference should be for the
Addressbook, because more entries
and functions (e.g. pictures, birth-
days, several phone numbers per
entry, etc.) are possible.
§Save§
Press.
Additional information
The content of the business card corre-
sponds to international standards (vCard).
·
Copy numbers from Address-
book/Phonebook.
Select Phonebook or
F
Addressbook.
§Options§ See Addressbook menu,
§Select§
Set as standard.
(p. 41).
Groups
(see p. 43)
Service numbers
(see p. 119)
36
Phonebook
ook Entries in the Phonebook (on the SIM
card) are managed separately from
those in the Addressbook. You can
however exchange data between
the Phonebook and the Address-
book.
Name:
Enter first and/or last names.
Location:
Default: SIM
Select the storage loca-
H
tion such as SIM or
<New Entry>
Protected SIM (p. 38).
If the Phonebook is set as standard
(Addressbook as standard, p. 35):
Record no.:
Each entry is automatically assigned
a record number. You can also dial
using the record number (p. 37).
Open Phonebook (in
F
standby mode).
NPhonebook
<Special Books>
<New Entry>
Carol
Ú
Change the record num-
H
ber.
§Save§
Press to store the new
entry.
O
Select
Additional information
<New Entry> Select.
Press.
D
OTemporary swap
§+List International dialing code....p. 117
Store control codes .........................p. 115
to Addressbook .................................p. 39
§Select§
Select input fields.
G
Fill in the input fields
J
<Special Books>:
described below. The
maximum number of let-
ters available is displayed
at the top of the screen.
Assign important phone numbers to group,
<SIM Phonebook> (p. 38),
<Protected SIM> (p. 38),
<Service Numb.> (p. 119).
Number:
Always enter phone number with
prefix.
37
Phonebook
Call (search for an entry) Phonebook menu
The following functions are avail-
able, depending on the current situ-
ation. Some functions may be
applied to the current entry as well
as multiple highlighted entries:
Open Phonebook.
F
Select a name with the
first letter and/or scroll.
/
G
J
Number is dialed.
A
§Options§
Open menu.
Call using record no.
A record number is automatically
assigned to every new entry in the
Phonebook.
View
Display entry.
Edit
Open the entry to edit.
Create new entry.
New Entry
Enter record number.
J
Copy Into 9
Copy new entry/entries into
Address book.
Press.
#
Copy All
to9
Copy all entries into
Address book.
Press.
A
Delete
Delete entry.
Change entry
Delete All
Delete all entries after con-
firmation.
Select entry in Phone-
G
book.
Mark
Activate selection mode,
the entry currently selected
is selected (p. 117).
§Options§ Press and select Edit.
Select input field.
G
Mark All
entries are selected
(p. 117).
Edit.
J
§Save§
Press.
Send/Print...
Import
(p. 114)
Import entries and appoint-
ments via IrDA in vCard
format.
Capacity
Display maximum and
available capacity.
Addressbook
bookThe Addressbook can store up to
§Group§
Entries can be organized
500 entries, each with a variety of
telephone and fax numbers as well
as additional address details. These
entries are managed separately from
those in the Phonebook in the phone
memory. However you can
by groups (p. 43). Select
with §Change§.
Make further entries field
by field.
D
Phone:
Company:
exchange data between the
Addressbook and the Phonebook on
the SIM card.
Phone/office:
Street:
Phone/mobile: ZIP code:
Fax:
City:
Fax 2:
E-mail:
E-mail 2:
Country:
Birthday:
Reminder:
Picture:
<New Entry>
If the Addressbook has been selected
as standard:
Open Addressbook (in
F
URL: (Internet
address)
standby mode).
Group:
Picture
NAddressbook Ú
<Groups>
§Select§ Assign an individ-
ual picture to an Address-
book entry. It is displayed
if you are called by the
corresponding phone
number (see p. 112).
<New Entry>
Carol
Import
Select
§Select§
Press.
All fields
š
New Entry
Last name:
§Smith§
fields if the display was
previously reduced (see
p. 41, Addressbook
menu, Field Setup).
First name:
Clear
Save
§Save§
Save the entry.
Enter first and/or last
name.
J
40
Addressbook
Additional information
<Groups> Group functions (p. 43).
NDoe, John
§Doe, John
Birthday After entering the date of birth,
the "reminder box" can be
activated. Now you can enter
the date and time of the
¿ 055512389
v
0555987654
Change
reminder in the organizer cal-
endar.
Copy data from another
·
§Import§
Select input field.
F
§Edit§
The phone is ready to receive
multiple vCard entries via IrDA
(p. 114).
Copy international dialing
code from the list (p. 117).
Open entry.
Make changes.
J
§+List§
§Options§
See p. 41.
§Save§
Save setting.
O
Temporarily switch to Phone-
book.
Right soft key:
When you jump from line to line while read-
ing, the right soft key changes depending
on the type of data. Press this key to acti-
vate the relevant application:
Synchronizing with a PC
Using XTNDConnect® PC (p. 123) you can
synchronize your Addressbook with
Using Remote Sync. you can synchronize
your mobile with an organizer stored on the
Internet (p. 108).
§VoiceDial§ Voice dialing menu.(p. 42).
§E-mail§
§Link§
Create e-mail. (p. 59).
Visit URL (p. 68).
§Show§
Display respective picture.
Read/change an entry
Open Addressbook
F
(in standby mode).
Select required entry.
G
§View§
Press.
41
Addressbook
Copy to SIM
Call, search for an entry
Copy entry/entries with
name and selected phone
number to SIM card.
Open Addressbook (in
standby mode).
F
Delete
Delete entry.
Select a name with the
first letter and/or scroll.
G
/
J
Delete All
firmation.
A
The number is dialed.
Mark
If an Addressbook entry has several
numbers stored:
Switch on highlighting
mode (p. 117).
Mark All
NDoe, John
Activate highlighting mode,
all entries are highlighted
(p. 117).
¿ 0555123454
v
0555987654
À 0555222345
Filter
Display only those
Addressbook entries with
the following criteria:
• Voice dialing
• E-mail
• URL
• Birthday
Select
G
A
Select phone number.
The number is dialed.
• Bitmap
Business-
card
Addressbook menu
Define an entry as your
own business card.
Depending on the actual situation,
different functions will be offered.
These functions can be applied to
the entry currently selected as well
as to multiple selected entries:
Voice dialing
Apply voice dialing to an
entry (p. 42).
Send/Print...
Import
(p. 114)
Import entries via IrDA™ in
vCard format.
§Options§
.
Open menu
Capacity
Display maximum and
available capacity.
View
Display entry.
Edit
Open the entry to edit.
Create new entry.
Assign entry to a group.
Field Setup
Select input fields for new
entry.
New Entry
Move to ...
42
Addressbook
Voice dialing menu
Depending on the actual situation,
different functions will be offered.
Voice dialing
Dial numbers by voice command. Up
to 20 recorded names for voice dial-
ing or voice commands (p. 107) can
be saved on the cell phone (not on
the SIM card).
§Options§
Play
Open menu.
Play back a voice command.
New
Record a new voice com-
mand.
Record
Open Addressbook (in
Delete
F
Delete voice command from
an entry.
standby mode).
Select a name with the
first letter and/or scroll.
G
/
J
Delete All
After confirmation delete all
voice commands for this
entry.
§Options§
Voice dialing
Select.
.
Open menu
Apply voice dialing
Hold down the plus/minus side key (in
Choose phone numbers,
if there are more than
one.
F
standby mode).
Now say the name. The number is
dialed.
§Record§ Press.
§Start§
Start recording.
Additional information
A short signal sounds. Now speak
the name. After a second beep
and message in the display, repeat
the name. A beep now confirms the
recording, which is saved automati-
cally.
Noisy environments may affect voice rec-
ognition. If attempt was unsuccessful,
press the side key once more and repeat
the name.
43
Groups
9 groups are specified in your phone,
Group menu
to enable you to arrange your
Addressbook entries clearly. You can
rename seven groups.
§Options§
Open menu.
Open
Display all members of the
selected group.
Open Addressbook (in
F
standby mode).
§View Addressbook p. 40.
§Options See p. 41
<Groups> Select (the number of
entries is listed behind the
group name).
Group
Symbol
Assign a symbol to a group,
see below.
Rename
Group
Change name of group.
NGroups
t
Leisure
Private
(5)
(23)
(11)
Move
Transfer one or more high-
lighted entries from one group
to another.
Ã
Ä Business
Open
Options
Delete All
After confirmation, delete all
members of the current
group.
Select group.
Open menu.
G
§Options§
Group Symbol
Assign to a group a symbol that
appears on the display when one of
its members calls you.
Rename Group
Select and give group a
name.
Additional information
Select group.
G
No Group: Contains all Addressbook
entries that do not belong to a group (name
cannot be changed).
§Options§
Open menu.
Received: Contains vCard Addressbook
entries received by IrDA or SMS (name
cannot be changed).
Group Symbol
Select.
Choose a symbol.
Confirm.
SMS to group.................................... p. 49
H
§OK§
44
ZCall Log
og Your phone stores the phone
Received Calls
L
numbers of calls for convenient
redialing.
Accepted calls are listed.
Requirement:
§Menu§K
§Select§
G
§Select§
G
A
Z
The network supports the "Caller
Identity" feature.
Press.
Dialed Calls
Access to the last numbers dialed.
Select call list.
Press.
Fast access in standby
mode.
A
Select phone number.
Dial phone number.
Clear Log
The contents of all call lists are
deleted.
Or
Call list menu
The call list menu can be called up if
an entry is highlighted.
§View§
Display information on
the phone number.
10 phone numbers can be stored in
each call list:
§Options§ Open list menu.
View
Missed Calls
View entry.
L
The phone numbers of calls that you
have received but not answered are
stored for call back purposes.
Correct No.
Load number to display
and edit there if neces-
sary.
Icon for missed call (in
ꢂ
Copy Into 9
Delete
Store entry in the Address-
book/Phonebook.
standby mode). Press the
control key (on the left) to
display phone number.
Delete entry after confir-
mation.
Requirement: The network supports
the "Caller Identity" feature.
Delete All
Delete all entries in call list
after confirmation.
45
]Voice mail/Mailbox
ce §Menu§K]KMsg. Setup
Save call forward number
KVoice Message
box
Calls are forwarded to this phone
number.
Most service providers supply an
external voice mail service. A caller
may leave a voice message for you in
this mailbox
§Menu§KmKPhone Setup
KCall Forward
Ke. g. UnansweredKSet
• if your phone is switched off or not ready to
receive,
Enter call forward number.
§OK§
Registration with net-
work. Forward will be
• if you do not want to answer,
• if you are making a phone call (and Call
onds.
Waiting is not activated, p. 79).
If voice mail is not part of your ser-
vice provider's package, you will
need to register and settings may
have to be made manually. The fol-
lowing description may vary slightly,
depending on the service provider.
Further information on call forward
can be found on p. 79.
Listen to
A new voice mail can be announced
as follows, depending on the service
provider:
Settings:
The service provider supplies you
with two phone numbers:
L
Icon plus beep.
\
Or
A text message
]
Save mailbox number
Call this phone number to listen to
the voice mails left for you.
announces a new voice
mail.
Or
]
§Menu§K KMsg. Setup
You receive a call with an automatic
announcement. Call your mailbox
and play the message(s) back.
KVoice Message
/
Select number from
Phonebook/Addressbook
or enter/change it.
J
·
Hold down (if necessary
1
enter mailbox number
once only). Confirm with
§OK§ or §Mailbox§ depending
on your service provider.
§OK§
Confirm.
Away from your home network you
may have to dial a different mailbox
number and enter a password before
you can listen to any messages.
46
ZDurat/Charges
You can display charge details and
the duration of different types of
calls while you speak, as well as set-
ting a unit limit for outgoing calls.
Acct. Limit
L
(PIN 2 prompt)
Special SIM cards allow you or the
service provider to define a credit or
a period after which the phone is
barred for outgoing calls.
§Menu§K KDurat/Charges
Z
Select type of call:
Last Call
§Change§ Press, enter PIN 2.
Acct. Limit Activate.
All Calls
Remain. units
Enter number of units.
J
§Select§
Display the data.
§OK§
Confirm.
Once displayed you can:
Then confirm the credit or reset the
counter. The status display for pre-
paid cards may vary, depending on
the service provider.
§Reset§
§OK§
Clear display.
End display.
Charge Setting
Auto Display
Call duration and call charges are
automatically displayed for each call.
Z
§Menu§K KDurat/Charges
KCharge Setting
Conv.
L
L
(PIN 2 prompt)
Enter the currency in which the
charge details are to be shown.
Personal Rate
(PIN 2 prompt)
Enter the charges per unit/period.
47
]SMS
S
You can transmit and receive very
§OK§
Confirm. Send the SMS to
the service center for
transmission. The sent
SMS is saved in the "Sent"
list.
long messages (up to 760 charac-
ters) on your phone. These are
automatically composed of several
"normal" SMS messages (note higher
charges).
§OK§
Return to Edit mode.
Additionally you can insert pictures
and sounds in an SMS.
Display in the uppermost line:
Depending on the service provider,
e-mails and faxes can also be sent -
and e-mails received via SMS
SMS
747
™
1
We start at 8
(change setting if necessary, p. 63).
T9 active.
™
abc/Abc/
ABC/123
Switch between upper-case/
lower-case letters and digits.
Writing and sending text
SMS
1
Display title.
Number of SMS messages
required.
Text input using "T9"
J
747
Number of characters still
available.
(p. 31) allows you to cre-
ate longer messages very
quickly using just a few
key strokes.
Additional information
Insert pictures & sounds into text ......p. 48
SMS profile........................................p. 63
A Message type, Validity period,
Service Center may be requested....p. 63
SMS status report............................p. 120
Enter special characters....................p. 31
§Clear§ Press briefly to
delete letter by letter,
hold down to delete an
entire word.
A
Press.
/
Dial number or pick out
Addressbook.
·
J
§Groups§ SMS to group
(p. 49).
48
]SMS
Text menu
Picture&Sound
Insert pictures and sounds into
message.
§Options§ Open text menu.
Send
Save
Enter recipient's phone num-
ber/select from Phonebook/
Addressbook, then send.
Write message.
J
§Options§ Open text menu at the
end of a word.
Save composed text in draft
list.
Select Picture&Sound.
G
Picture&
Sound
Add pictures, animations
and sounds into message
(see following text).
The menu contains:
Fix animations
Fix sounds
Text
Modules
Insert text module (p. 34).
Select section.
G
Format
Line Feed
Small font, Medium font,
Large font
Underline
Left, Right, Center (align)
§Select§
Confirm.
The first entry of the
selected section is
displayed.
Mark Text (highlight text
Scroll to entry required.
F
using control key)
When Fix animations/Fix sounds:
Delete Text
Delete the whole text.
§Select§
the selection is added to
the SMS.
Insert
From...
Insert entry from Phone-
book/Addressbook.
T9 Input
(p. 31)
T9 Preferred: Activate/
Additional information
Playback only occurs if the destination
phone supports the EMS standard (p. 116).
In input mode, when sound is selected, it is
shown as a bell.
deactivate T9.
Input language: Select lan-
guage for text.
Print via
IrDA
Send SMS message to a
suitable printer.
Send via ...
Select an SMS profile for
transmission (p. 63).
49
]SMS
SMS to group
Read SMS
You can send an SMS message as a
"circular" to a recipient group.
Display indicates a new
]
SMS.
§Options§ Open menu.
_
g
Send
Select.
Service provider
§Groups§ Press. The Addressbook is
opened in highlighting
04/25/2003
12:30
Menu
mode (p. 117). There are
the following options:
]
• Highlight individual entries.
<
Press the left soft key to
read SMS message.
• <Groups> Select, open a group and high-
light individual entries/all entries there.
• <Groups>Select. Select a group.
Date/time
04/25/2003
55536989876
Are we meeting tomorrow?
Reply Options
23:45
§Send§
Press. The first of the
highlighted recipients is
displayed. If this recipient
has several phone num-
bers, one number can be
selected.
Tel. no./sender
Message
Scroll through message
line by line.
§Skip§ Skip recipient.
F
§Send§
Transmission is started
after confirmation.
§Reply§
See below.
§Options§ see p. 51.
Additional information
Pictures and sounds in SMS .............p. 48
T
Message memory full ..............p. 118
Use §highlighted§ phone number/
e-mail address/WAP address..........p. 119
50
]SMS
Reply menu
Lists
All SMS messages are archived in
four different lists, according to their
status:
§Reply§
Open reply menu.
Write mess.
Create a new reply
text.
Inbox
Edit
Edit received SMS or
add new text.
§Menu§K]KInboxKSMS
The list of received SMS messages is
displayed.
Answer is YES
Answer is NO
Add YES to the SMS.
Add NO to the SMS.
]
Inbox
ƒ 0555123454
Call back
Delay
Thank you
Add a standard text as
a reply to the SMS.
… Carol
… Mike
When the SMS has been edited in
the edit mode, it can be saved or
sent with §Options§.
View
Options
Drafts
§Menu§K]KDraftKSMS
Ring tones, icons ...
The list of not yet transmitted SMS
messages is displayed.
You can receive ring tones, icons,
screensavers, animations and infor-
mation on applications (p. 72) with
an SMS in which a link is displayed.
Please highlight this link and, by
download.
Unsent
§Menu§K]KUnsentKSMS
The list of concatenated SMS mes-
sages not yet completely sent is
displayed. Transmission can be
restarted.
Please ensure that the HTTP profile
(p. 73) and the connection (p. 84)
are configured.
Sent
§Menu§K]KSentKSMS
The list of sent SMS messages is
displayed.
51
]SMS
Lists menu
Archive
Each list offers different functions:
§Menu§K]KSMS Archive
The list of SMS messages stored in
the phone is displayed.
§Options§ Open menu.
View
View entry.
Ñ\SMS
INBOX
DRAFT
UNSENT
Reply
Directly answer incoming
SMS messages.
Delete
Delete selected SMS
messages.
Options
Select
Delete All
Send
Delete all SMS messages
after confirmation.
Unread
…
ƒ
Dial number or select from the
Phonebook, then send.
Read
Draft
Sent
Edit
Open SMS message to edit.
‚
„
Capacity
Display free capacity on SIM
card/phone. In case of seg-
ments: number of concate-
nated SMS messages.
Entry on SIM card.
¢
x
Concatenated message.
Set as
Unread
Mark message as unread.
Different functions are available,
depending on context:
Save
No.to 9
Copy a highlighted phone
number to Phone/Address-
book.
Archive menu
§Options§ Open menu.
Archive
Move SMS message to
archive.
View
Send
View entry.
Print via
IrDA
Send SMS message to a suit-
able printer.
Dial number or select from
the Phonebook, then send.
Send via
...
Select an SMS profile for
transmission (p. 63).
Edit
Open edit mode for
changes.
Save No.to
9
Copy a highlighted phone
number to Phone/Address-
book.
52
]SMS
Paste
Transfer content of tempo-
rary memory to current
folder.
Delete
Delete All
Mark
Delete current entry.
Delete all entries.
See highlighting mode
(p. 117).
Mark All
All entries highlighted, see
highlighting mode (p. 117).
New Folder
Create a new folder and
give it a name (only one
folder depth available).
Rename
Change highlighted entry.
Print via
IrDA
Send SMS message to a
suitable printer.
Sort
Set sort criteria (alphabeti-
cal, type, time).
Attributes
Drive Info
Display information on file
or folder selected.
Display the capacity used
and available.
For further services, see File Manager,
p. 112.
53
]MMS
S
The Multimedia Messaging Service
Music is sent and received in a MIDI
enables you to send texts, pictures
(also photos) and sounds in a com-
bined message to another mobile
phone or to an e-mail address. All
elements of an MMS message are
merged to form a "slide show".
file, single tones/sounds in an AMR
file. Up to 48 KB can be played back.
Navigation
Scroll line by line with the
G
control key.
Scroll page by page with the plus/
minus side key, by pressing top/bot-
tom.
Depending on your phone's settings,
you will receive either the complete
message automatically or notifica-
tion that an MMS has been saved in
the network, giving sender and size
details. You may then download it to
your phone to read it.
§Menu§K]KNew MMS
Ÿ
MMS editor
To:
Ask your service provider whether
this service is available. You may
need to register for this service
separately.
Subject: 1
Options
º
Input fields:
Writing/sending MMS
messages
To:
·/JPhone number/
e-mail address of recipi-
ent(s).
An MMS consists of the address
header and the content.
Subject: Enter MMS heading (up to
40 characters)
An MMS message can consist of a
series of pages, each one of which
sounds and pictures.
Picture:
list is opened for selection
(see also File Manager,
p. 112).
Texts can be written with the help of
T9 (p. 31).
Text:
§Edit§ Press. Write text with
the help of T9. Text menu,
see p. 54.
Pictures and graphics that have been
digital cameras can be attached in
JPEG, WBMP, GIF or GIF format. See
also File Manager, p. 112.
Tones/Alerts:
is opened for selection
(see also File Manager,
p. 112).
54
]MMS
Slide duration
Check MMS
Enter length of display for
individual pages (mini-
mum 0.1 seconds).
Check the MMS message before
sending it:
§Options§ Open menu.
Attach other pages
Preview Slide
§Options§ Open menu.
View a single page.
New Slide Select.
Prev. Message
Additional information
Play back the whole MMS
in the display. Press any
key to break off.
No more than 20 phone numbers/
addresses, (of 50 characters each) can be
addressed.
Send MMS.
§Options§ MMS main menu............... p. 54
Attach business card
§Options§ Open menu.
§Options§ Open menu.
Send
Select.
Extras
Select.
Text menu
F
Scroll to Businesscard.
·
Attach business card.
§Options§ Open menu.
Attach appointment
Line Feed
Save
Start new line.
§Options§ Open menu.
Save MMS text.
Extras
Select.
Insert text
Delete Text
Insert text module (p. 34).
Delete the whole text.
F
Scroll to Appointment.
é
Import appointment from
calendar.
T9 Input
(p. 31)
T9 Preferred: Activate/
deactivate T9.
Input language: Select
language for text.
MMS menu
Different functions are available,
depending on the context:
55
]MMS
§Options§ Open menu.
T9 Input
T9 Preferred: Activate/
(p. 31)
deactivate T9.
Insert Line
Save
Extend address field by
one line.
Input language: Choose
language in which the
text is to be written.
Store MMS in the draft
list.
Attributes
Extras
Show Date:, Size:, Prio-
rity: of MMS.
Send
Send MMS.
Enter other features of
MMS and attach
Businesscard and
Appointment.
Insert From...
Insert number from
Phonebook/Address-
book and appointments/
tasks.
Delete Text
New Slide
Delete the whole text.
Insert new page behind
current one.
Delete Item
Delete Slide
Preview Slide
Slide List
Delete element on a
page.
Delete page currently
displayed.
Playback of complete
page.
Display pages available
for selection.
Prev.
Message
Playback of complete
MMS. Press any key to
break off.
56
]MMS
Attachment
Receive MMS
‰
A single MMS can contain several
attachments.
Indicates reception or
notification of an MMS.
§Options§ Open menu.
_
g
Attachment
Service provider
Select.
Select attachment.
04/25/2003
12:30
G
Menu
‰
§Open§
The attachment is opened
with the available applica-
tion.
<
Press the left soft key to
read the MMS.
§Save§
The attachment is saved
under a name.
Depending on the setting, (p. 64)
the
Pictures and sounds
• complete MMS is received.
Pictures and sounds received in an
MMS can be saved separately. To do
this, stop the MMS by pressing any
key, or alternatively scroll through to
the required page.
• the notification is opened. Press §Recei-
ving§ to receive the complete MMS.
Press any key to break off function.
Read MMS
§Options§ Open menu.
§Play§
Automatic presentation
of the MMS. Use any key
to cancel.
Content
Select.
Proceed as for attach-
ments, as described
above. Show as icons at
the top of every page.
Scroll page by page with
the control key.
G
Scroll page by page with the plus/
minus side key, by pressing top/bot-
tom.
Functions for editing MMS can be found
under §Options§.
Call up individual pages
directly by number key.
J
57
]MMS
Lists menu
Lists
Each list offers different functions:
All MMS messages are saved in four
different lists:
§Options§ Open menu.
Inbox
Play
Play back MMS.
§Menu§K]KInboxKMMS
Change
Open edit mode for
changes.
The list of MMS messages and notifi-
cations received is displayed. To
receive an MMS subsequently, open
notification and press §Receiving§.
Reply
Send
Reply to MMS immediately.
Send MMS.
Draft
Receive
MMS
Start inward transmission
of MMS when only notifica-
tion is highlighted (p. 64).
§Menu§K]KDraftKMMS
The list of stored drafts is displayed.
Receiv.all
MMS
Start receipt of all MMS
messages.
Unsent
Forward
Forward MMS to new
recipients.
§Menu§K]KUnsentKMMS
The list of the MMS messages not yet
completely transmitted is displayed.
Delete
Delete selected MMS
messages.
Sent
Delete All
Delete all entries after
confirmation.
§Menu§K]KSentKMMS
The list of sent MMS messages is
displayed.
Set as
Unread
Mark MMS as unread.
Save No.to
9
Copy phone number/e-mail
address into Phonebook/
Addressbook.
Attributes
Information on MMS is dis-
played:
• Sender
• Arrival time
• Subject
• Size
• Priority
58
]MMS
Capacity
Size of current MMS as well
as capacity still available
are shown.
Preview
Slide
Play back current page.
Slide List
Attachment
Content
Display pages available for
selection.
Open list of attachments
received.
Selection of page contents
to be archived, such as pic-
ture or sound.
Save
Store MMS in outbox list.
Icon:
Meaning
MMS unread
‰
MMS read
‡
MMS draft
†
ꢄ
Ý
Þ
MMS sent
MMS read and forwarded
MMS read with dispatched
confirmation
Notification unread
Notification read
Û
Ü
59
]E-mail
(client). You can use it to create and
receive e-mails.
ail Your phone has an e-mail program
Add attachments
A file from the file system (e.g. ring
tone) can be inserted in an e-mail as
an attachment (p. 112).
The content received in an e-mail is
saved in the File Manager in one of
the MyData\sub folders.
§Attach.§
Open file system.
Select file to be inserted.
Highlight file.
The content used to create an e-mail
has to come from the MyData folder
in the File Manager.
§Mark§
§OK§
Copy file as an
attachment.
Write/send e-mails
E-mail editor menu
§Menu§K]KNew E-mail
§Options§ Open menu.
Enter e-mail address
Insert Line
Delete Line
Extend address field by
one line.
/
To: E-mail address of
J
·
recipient(s).
Cc: E-mail address for the
copy recipient.
Delete line in address field.
T9 Input
(p. 31)
T9 Preferred: Activate/
deactivate T9.
Input language: Select
language for text.
Bcc: E-mail address for
blind copy recipients (the
other recipients are not
shown the Bcc recipient).
Insert
From...
Insert entry from Phone-
book/Addressbook.
Attach.: See below.
* Press briefly to write special charac-
Attach.
Save
(see above).
ters such as @ (p. 31).
T9 helps you write e-mails (p. 31).
Save in draft list.
Send
server and send e-mail. If
necessary, select different
access (p. 84).
Subject: Enter e-mail
J
heading (up to
200 characters).
Content: Enter text.
Send Later
J
Transfer to outbox list to be
sent later.
§Options§ Open menu.
Send
Send e-mail.
60
]E-mail
Receive e-mail
§Menu§K]KInbox
Before an e-mail can be read, it must
be retrieved from the server. The ser-
vice provider is dialed with the
default access profile (p. 84) and all
e-mails are transmitted to the inbox
list.
Read new e-mail
§Menu§K]KInboxKE-mail
KReceive E-mail
Select e-mail.
G
§View§
The e-mail is displayed.
Switch between small,
normal and large font
sizes.
#
Scroll line by line with the
control key.
Additional information
The e-mail client always receives complete
messages including header, content and, if
applicable, attachments. You can restrict
the size of the received messages (p. 65).
Scroll page by page with
the plus/minus side key,
by pressing top/bottom.
A maximum of 50 e-mails can be stored in
the phone. E-mail size is limited to 99 KB.
The left soft key offers different
functions depending on which text
area you have selected:
Synchronizing with a PC
With XTNDConnect® PC (p. 123) you can
synchronize your incoming/outgoing
e-mails with Outlook® or Lotus Notes™.
E-mail addresses/phone
ꢃ
numbers in the message
are §highlighted§ and can be
stored in the Address-
book.
E-mail with attach-
ment
Meaning
A Dial phone number or
start new e-mail.
Unread
Read
Draft
ꢅ ”
‹ ꢆ
Š ꢇ
Œ “
§Save§
Save attachment
(e.g. bitmap).
§Reply§
§Link§
Reply to sender.
Start WAP browser and
visit URL (p. 69).
Sent
61
]E-mail
Read menu
Lists
All e-mails are stored in four differ-
§Options§ Open menu.
ent lists:
Reply
The original e-mail is
retrieved. The sender is
entered as recipient and
can be changed as can the
header and CC.
Inbox
§Menu§K]KInboxKE-mail
The list of received e-mails is
displayed.
Reply to all
Forward
As above, but all recipients
are listed in the "Send to"
field.
Select e-mail.
G
§View§
The e-mail is displayed for
reading.
The original e-mail is
retrieved. Enter the new
recipient to whom it should
be forwarded.
Draft
§Menu§K]KDraftKE-mail
Change
To edit, open e-mail in edit
mode.
The list of draft e-mails is displayed.
Delete
Delete selected e-mail.
Unsent
Delete All
Delete all e-mails in the
inbox or outbox.
§Menu§K]KUnsent
KE-mail
Font size
Select font size.
The list of not yet transmitted e-
mails is displayed.
Save attach.
The attachment is stored in
the file system (File Man-
ager, p. 112).
§Menu§K]KUnsent
KSend E-mail
Send all e-mails queued for transmis-
sion to the server.
§Menu§K]KUnsent
KSnd/Rec. Mail
Transmit all e-mails queued for
transmission to the server and
receive all new e-mails from the
server.
62
]E-mail
Sent
Sort
Sort
• by subject
• by sender
• by recipient
• by date/time
• by status
§Menu§K]KSentKE-mail
The list of transmitted e-mails is
displayed.
Lists menu
Each list offers different functions:
Not all sort criteria are possi-
ble in all lists.
§Options§ Open menu.
Send E-
mail
Establish connection with
server and send e-mails.
View
(p. 60)
Receive
E-mail
Establish connection with
server and receive incoming
e-mails.
Change
Reply
Edit e-mail.
The original e-mail is
retrieved. The sender is
entered as recipient and can
be changed as can the
header and CC.
Snd/Rec.
Mail
Establish connection with
server, send e-mails and
receive incoming e-mails.
Reply to all
Forward
As above, but all recipients
are listed in the "Send to"
field.
The original e-mail is
retrieved. Enter the new
recipient to whom it should
be forwarded.
Delete
Delete selected e-mail in
phone.
Delete All
Delete all e-mails in phone.
63
]Message profiles
ssag SMS profile
Status
You will receive confirmation
whether delivery of a mes-
sage has been successful or
unsuccessful. This service
may be subject to a charge.
s
Report
§Menu§K]KMsg. SetupKSMS
L
Up to 5 SMS profiles can be set.
The transmission characteristics of
an SMS are defined in these. The pre-
setting depends on the SIM card
inserted.
Direct
Reply
L
The reply to your SMS mes-
sage is handled via your ser-
vice center when Direct
Answer is activated (for infor-
mation please contact your
service provider).
G
Select profile.
§Options§ Open menu.
SMS via
GPRS
L
GPRS (if available).
Requirement: GPRS is acti-
vated (p. 83). Ensure that
your service provider offers
this function.
Change Sett.
Select.
Service
Center
Enter or change the service-
center phone numbers as
supplied by service provider.
Send &
Save
Recipient
Sent SMS messages are
saved in the Sent list.
Enter the standard recipient
for this transmission profile or
select from Phonebook.
Activate profile
Message
type
Manual
The message type is
requested for each message.
Standard text
Normal SMS message.
New
G
Select profile.
§Activate§ Press to activate profile.
You may need to obtain the
required code number from
your service provider.
Validity
period
Select the period in which the
service center is to try to
deliver the message:
Manual, 1 hour, 3 hours,
6 hours, 12 hours, 1 day,
1 week, Maximum
*) Maximum period that the
service provider permits.
64
]Message profiles
Retrieval
MMS profile
Receive complete MMS or
only notification of arrival.
Automatic
Receive complete MMS
immediately.
Auto.homenet
§Menu§K]KMsg. SetupKMMS
A number of MMS profiles can be
selected. The transmission charac-
teristics of an MMS are defined in
these.
Receive complete MMS
immediately in home net-
work
G
Select profile.
§Options§ Open menu.
Manual
Only the notification is
received.
Change Sett.
Select.
MMS
MMS relay URL, e.g.
http://www.webpage.com
Expire
Time
Select the period in which
the service center is to try to
deliver the message:
Manual, 1 hour, 3 hours,
6 hours, 12 hours, 1 day,
1 week, Maximum*, New
RelaySrv.
IP Settings
IP address: Enter IP
address.
Port: Enter port number.
2nd IP address: Enter IP
address.
*) Maximum period that the
service provider permits.
2nd Port: Enter port num-
Def.
Send priority:Normal, High,
ber.
Priority
Low
These settings can be differ-
browser.
Def.
Duration
Length of display for an
MMS page (standard
requirement).
Conn.pro-
file:
Select or set access profile
(p. 84).
Activate profile
G
Select profile.
§Activate§ Press to activate profile.
65
]Message profiles
Accounts
E-mail settings
5 accounts can be defined. If no
§Menu§K]KMsg. Setup
access data have been defined for
the account, the entry card is dis-
played.
KE-mail
KSelect function.
Before using this service, you must
set the server access and your e-mail
options. The data for these may
already have been entered. If not,
your service provider will supply you
with the relevant information. See
also on the Internet at:
Alternatively:
§Options§ Press.
Change Sett.
Select, then:
User settings
Provider
Select provider.
Your name.
Additional information
User name:
E-mail addr.: *
Your service provider must support the
following protocols for successful data
exchange with the e-mail server:
Your e-mail address,
e.g.:[email protected]
POP3, IMAP4 and SMTP or eSMTP.
E-mails will be MIME-encoded for
transmission.
Encryption of e-mail transmission (SSL,
APOP) is not possible at present.
Reply-t.addr.:
Additional e-mail
address for replies.
User ID: *
Your user ID.
Password: *
Your password.
*Your service provider will supply you with this
information.
Mail settings
Downl. only
mails smaller
than
Set maximum size for
incoming e-mails.
<10> KB
Leave copy on
server?
E-mails remain on the
server after they have
been retrieved.
Types
POP3 or IMAP4.
POP3 server: *
Enter Internet address if
the server type is POP3
and SMTP.
66
]Message profiles
POP3 Port: *
(Default: 110)
IMAP4 *
Enter Internet address if
the server type is IMAP4
and SMTP.
IMAP4 Port: *
SMTP server: *
SMTP port: *
(Default: 143)
Enter Internet address.
(Default: 25)
SMTP
Authentic.:
Authentication: Yes/No
SMTP
Password:
A user password will be
required if "Authentica-
tion" is set to Yes.
*Your service provider will supply you with this
information.
§OK§
Save and activate
settings.
Gen. Setting
Enter the preset default of an e-mail
address for blind-copy recipient
(Bcc).
Activate profile
G
Select profile.
§Activate§ Press to activate profile.
67
]CB Services
Ser- §Menu§K]KMsg. Setup
Channel: Select
KCB Services
§Options§ Open list menu.
Some service providers offer infor-
mation services (info channels, cell
broadcast). If reception is activated,
your "Topic List" will supply you with
messages on the activated topics.
If a topic is selected in the list you
can view it, activate/deactivate it,
edit it or delete it.
Auto Display
CB messages are displayed in
Broadcast
standby mode, longer messages are
scrolled automatically. This display
can be activated/deactivated for all
or only new messages.
You can activate and deactivate the
Cell Broadcast (CB) service. If the CB
service is activated, standby time for
the phone will be reduced.
For "full page view":
Read New CB
All unread CB messages are dis-
played.
#
press
, then §View CB§.
Topic Index
L
The list of topics is displayed
Topic List
for you to choose from. If nothing is
displayed, you must enter the chan-
nel numbers (ID) manually (Topic
List). Please contact your service pro-
vider for details.
Add an unrestricted number of top-
ics to this personal list from the topic
index (Topic Index).You can preset 10
entries with their channel number
(ID) and, if necessary, their names.
CB Languages
New Topic Select.
Receive Cell Broadcast messages in
only one specific language or in all
languages.
• If no topic index (Topic Index) is available,
enter a topic with its channel number and
confirm with §OK§.
Displays
• If the topic index has already been trans-
mitted, select a topic and confirm with
§OK§.
p,o Topic activated/deactivated.
New messages received on
…
the topic.
ƒ
Messages already read.
68
ÉSurf & Fun
&
Start menu
Internet browser (WAP)
Get the latest information from the
Internet that is specifically adapted
to the display options of your phone.
In addition, you can download
games and applications to your
phone. Internet access may require
registration with the service
provider.
Homepage
The connection to the pro-
vider's portal is set up. This
may be defined or pre-set
by your service provider.
Bookmarks
Resume
Up to 50 URLs stored in
the phone for fast access.
Call up recently visited
pages that are still in
memory.
The content downloaded during a
WAP session is saved in the File Man-
ager in one of the protected non-
MyData folders. This content can be
used by the phone, but cannot be
forwarded out of the phone.
Inbox
Inbox for messages from
the WAP server (WAP
push).
Profiles
The list of profiles is dis-
played for activation/set-
ting (p. 70).
Internet access
L
Exit browser
É
§Menu§K KInternet
Close browser and clear
down connection.
"Internet" may be replaced by a
name provided by the Service Pro-
which WAP access should be made
(see Browser menu, Setup, Start with...,
p. 69).
Additional information
Operating instructions .....................p. 121
End connection
For example the start menu appears:
Hold down to clear down
B
the connection and to
Í Start menu
É
close the browser.
1 Homepage
2 Bookmarks§§§§§§§§§§§§§§§§§§§§§§§§§§§§§
3 Resume
Your Internet browser is licensed by:
Select
Select required function.
Confirm.
G
§Select§
69
ÉSurf & Fun
Browser menu
More ... (in menu)
If the browser is active, the menu
can be activated as follows:
Profiles
The list of profiles is dis-
played for activation/setting
(p. 70).
Press
A
Setup
Font size
Protocol parameters
• Push
• Push can force online
• Timeout for unanswered
network requests
or
E
Íconfirm.
Homepage
The connection to the pro-
vider's portal is set up. This
may be defined or pre-set
Security
• Secure prompt
• Current certificate
• CA certificates
• Private Key PINs
• Encryption
Bookmarks
Up to 50 URLs stored in the
phone for fast access
(p. 122).
Resume
Go to...
Call up most recently vis-
ited page still in memory.
Start with...
• Start menu
• Browser menu
• Homepage
• Resume
• Bookmarks
Picture&Sound
• Picture
Enter URL to access WAP
page directly, e.g.
wap.my-siemens.com
Select from list of most
recently visited WAP
addresses.
• Dithering
Reload
Inbox
Reload page.
• Tones/alerts
Reset
Restart session and clear
cache.
Inbox for messages from
the WAP server
(WAP push).
About
Openwave
Display browser version.
Disconnect
End connection.
Save picture
More ...
Save a picture on the page.
See below.
Exit browser
Close browser and clear
down connection.
70
ÉSurf & Fun
§Select§
Activate. The current pro-
file is selected.
Notes
Í
Browser menu.
Offline.
Online.
GPRS Online.
No network.
Select special characters,
such as @, ~, \, see p. 31.
or
Set WAP profile
É
Up to 5 WAP profiles can be set (if
not barred by provider). The entries
may vary depending on the service
provider:
Ê
Ë
Ì
*
0
G
Select profile.
§Edit§
Open to make settings.
press repeatedly for:
. ,? ! @ / & ~ + - =
Profile name
Enter/change name.
WAP param.
IP address:
Port:
L
WAP profiles
É
Enter IP address.*
Enter port number.*
§Menu§K KInternetKProfiles
The name "Internet" may be replaced
by a name provided by the Service
Provider.
Homepage:
Enter homepage, if not set
by the service provider.
Preparation of the phone for WAP
Internet access depends on the cur-
rent service provider:
GPRSlinger
time
Time in seconds after which
a connection should be
ended if no input or data
exchange takes place.
• The settings have already been installed
by provider. You can start immediately.
CSD linger-
time
Time in seconds after which
a connection should be
exchange takes place.
• Access profiles for a number of providers
have already been set. Then select and
activate profile.
• The access profile must be set manually.
Conn.
Profile
Select or set access profile
(p. 84).
If necessary, check with your service
provider for details.
*) depends on service provider, if necessary
enter 2nd IP address and 2nd port
Activate WAP profile
§Save§
Save settings.
You can change the current profile
each time you access the Internet.
G
Select profile.
71
ÉSurf & Fun
Games and applications
Games & More
Applications and links that are
already stored on the phone are
Download games and other applica-
tions. You are advised about relevant
applications on the Internet.
found unÉder:
§Menu§K KGames & More
Once you have selected a game or
application you can start to down-
load it immediately. Then you can
use the application.
§
\
¦Application
§
Game
Most applications include
instructions.
É MySiemens
Options
Select
Additional information
To download applications, the WAP
profile (p. 70), HTTP profile (p. 73) and
access (p. 84) must be configured.
Java™ information.......................... p. 118
Sounds (ringer)/silent alert on/off......p. 76
Different functions are available
depending on which entry is high-
lighted:
§
Carry out game/application offline
§Select§
Loadable application can
Applications and games can be
found at:
¦Load game/application online
wap.my-siemens.com
or on the Internet at:
§Select§
Only description file
(p. 118); application has
still to be loaded.
ÉLoad link (optional)
§Internet§ The selected Internet
page is loaded.
72
ÉSurf & Fun
Receive information
Delete All
Delete all applications/fold-
ers after confirmation.
If information required, say, by an
application that has already been
installed, is received via SMS, the ¦
symbol appears in the display. By
pressing the left soft key, the rele-
vant application is started and the
information is processed.
Rename
Move
Rename highlighted appli-
cations/folders.
Move applications between
folders.
HTTP
Profile
The list of profiles is dis-
played for activation/setting
(p. 73).
Additional information
The following key control is used for many
games (virtual joystick):
Reinstall
More Info
Reinstall an application
(update).
Download further instruc-
tions via Internet (WAP), if
available.
1 3
2
4
6
5
Details
Show details of the applica-
tion/folder (name, version,
size, path, producer, date).
7 9
8
Sort
Set sort criteria (alphabeti-
cal, time).
Games&More menu
All functions required for editing and
managing your applications and
folders are found in the Options
menu:
Capacity
Display maximum and
available capacity.
§Options§ Open menu.
Start
Start application.
Download
An application is down-
loaded from the Internet
and installed.
New Folder
Delete
Create and name new
folder.
Delete selected application/
folder.
73
ÉSurf & Fun
HTTP Profile
WAP can be used to download applications from
É
§Menu§K KGames & More
the Internet. Downloading or running applications
will not affect or change the software already
installed on your Java™-enabled cell phone.
Siemens excludes all warranty and liability claims
in respect of or in connection with any applica-
tions subsequently installed by the customer and
any software not included in the original delivery
package. This also applies to functions enabled
subsequently at the customer's instigation. The
purchaser bears sole risk for the loss of, damage
to, and any defects arising in, this device or the
applications or software and for any direct dam-
age or consequential damage of whatever nature
resulting from the use of these applications or
software. For technical reasons, such applica-
tions or software and subsequent enabling of cer-
tain functions are lost in the event of the device
being replaced/re-supplied and may be lost if it is
repaired. In these cases the purchaser will need
to download the application again or re-enable it.
Siemens does not warranty or guarantee or
accept any liability for the customer's ability to
download or enable applications again or to do so
free of charge.
§Options§ Open menu
G
Select HTTP Profile.
Preparation of the phone depends
on current service provider:
• The settings have already been installed
by provider. You can start immediately.
• Access profiles have already been set by
your provider. Then select and activate
profile.
• The access profiles have to be set manu-
ally.
If necessary, check with your service
provider for details.
74
mSetup
up
Logo
Display
§Menu§KmKDisplay
Choose picture to be displayed
instead of the provider logo.
KSelect function.
Color Scheme
Language
Select color scheme for the whole
service system.
Set the language of the display text.
When "automatic" is set, the lan-
guage of your service provider is
used. If a language that you do not
understand happens to be set, the
phone can be reset to the language
of your service provider with the fol-
lowing input (in standby mode):
Activate color scheme
Select color scheme.
G
§Select§
Activate.
Load color scheme
Up to three color schemes can be
included in the selection list. These
can be loaded by WAP, for example.
*
T9 Input
(see also p. 32)
§Options§
Open menu.
T9 Preferred
Load
Select color scheme.
Activate/deactivate intelligent text
entry.
Input language
Select language for text entry. Lan-
guages with T9 support are marked
by the T9 symbol.
Background
Set background graphic for display.
75
mSetup
Screensaver
Shutdn. Anim.
The screensaver shows a picture in
the display when a period set by you
has elapsed. The function is ended
by an incoming call or by pressing
any key.
Select animation to be shown when
phone is switched off.
Own Greeting
Enter greeting to be displayed
instead of animation when phone is
switched on.
Enable
Activate/deactivate
screensaver.
§Edit§
J
§OK§
Activate/deactivate.
Style
Analog Clock, Bitmap
or Energy Saving.
Delete old message and
create new message.
Picture
Select picture in file
system.
Confirm changes.
Preview
Timeout
Display screensaver.
Big Letters
You can choose between two font
sizes for the display.
Set period after which the
screensaver starts.
Security
Phone-code protected ter-
mination of screensaver.
Illumination
Set display light brighter/darker. The
darker the setting the longer the
standby time.
Auto Key
Lock
The keypad is locked
when the screensaver
starts.
Press the control key
repeatedly to adjust up or
down.
G
screensavers and animations by
SMS (p. 47), MMS (p. 53) or WAP (p. 68).
See also My phone (p. 25).
Contrast
Set display contrast.
Press the control key
repeatedly to adjust up or
down.
G
Start Anim.
Select animation to be shown when
phone is switched on.
76
mSetup
Volume
Tones/Alerts
§Menu§KmKTones/Alerts
You can set the tones to match your
needs.
Set different volumes for types of
call/functions.
KSelect function.
Select:
G
d Calls
Ringer Setting
On/Off
Group Calls
Other Calls
Alarms
Activate/deactivate all
tones.
Beep
Reduce ring tone to a
short signal (beep).
Alarm Clock
Messages
Additional information
Cell Broadcast
Start Melody
End Melody
Applications
k
Display: Beep.
Display: Ringer off.
j
Switch off ringer ..............................p. 120
Vibrating Alert
ProSlide (common setting for
opening and closing melody)
Press. The ring tone is
played.
To avoid the disturbance caused by a
ringing phone, you can activate the
silent alert function as an alterna-
tive. The silent alert can also be acti-
vated in addition to the ringer (e.g.
in noisy environments). This func-
tion is deactivated when the battery
is charged.
§Select§
Set volume.
Confirm.
G
§OK§
Additional information
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ring tones!
If two independent phone numbers are reg-
istered on your phone, you can set different
volumes for them (p. 120).
77
mSetup
§Menu§KmKTones/Alerts
Call Screening
L
KSelect function.
Only calls from phone numbers that
are in the Phonebook/Addressbook
or in a group are signaled audibly or
by silent alert. Other calls are merely
displayed.
Ringtones
Set different ring tones for types of
call/functions.
Select:
If you do not accept these calls, they
are forwarded to your mailbox
(if set, p. 79).
G
d Calls
Group Calls
Other Calls
Alarms
l
Display in standby mode:
when call screening is
activated.
Alarm Clock
Messages
Key Tones
You can set the type of acoustic key
tone:
Cell Broadcast
Start Melody
End Melody
Open ProSlide
Close ProSlide
Click or Tone or Still
Minute Beep
During a call, you will hear a beep
after every minute as a reminder of
the time elapsed. The recipient does
not hear this beep.
§Select§
Press. The melody is
played.
Choose ring tone.
Confirm.
Info Tones
Set service and alarm tones:
G
§OK§
Activate/deactivate tones.
Extended If switched on, a wider
range of service tones is
available, e.g.:
Individual ring tones can be sent to you via
SMS (p. 47) or you can download them via
WAP (p. 68). See also My phone (p. 25).
• End of menu,
• Network connection broken.
78
mSetup
Key Tones
Keys
§Menu§KmKKeys
You can set the type of acoustic key
tone:
KSelect function.
Click or Tone or Silent
Any to Answer
Incoming calls can be accepted by
pressing any key.
(except
).
B
Auto Key Lock
If activated, the keypad is locked
automatically if no key has been
pressed for one minute in standby
mode. This prevents the phone from
being used accidentally. However,
you can still be called and you can
still make an emergency call.
ProSlide Lock
Enable/disable automatic keylock
when closing keypad. The keys are
alwaysunlockedautomatically when
opening the keypad.
Additional information
The keypad can also be directly locked and
unlocked in idle state.
as follows.
Hold down.
#
79
mSetup
Unanswered
Phone Setup
L
Select Unanswered
(includes the Not reach-
G
§Menu§KmKPhone Setup
KSelect function.
able, No reply, Busy condi-
tions, see below).
Call Waiting
L
§Select§
Press.
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it (see
also p. 29).
Set
Select.
Enter the phone number
to which the caller will be
forwarded (if not already
done)
J
Hide ID
L
When you make a call, your phone
number can be displayed on the
recipient's display (depending on the
service provider).
Or
·
Select this phone number
from the Addressbook/
Phonebook or via §Mailbox§.
To suppress this display, you can
enable the "Hide ID" mode for all sub-
sequent calls or just for the next call.
You may need to register separately
with your service provider for these
functions.
§OK§
Confirm. After a short
pause, the setting is con-
firmed by the network.
All calls
All calls are forwarded.
L
Call Forward
You can set the conditions under
which calls are forwarded to your
mailbox or other numbers.
n
Icon in top line of display
in standby mode.
Not reachable
Forward occurs if phone is switched
off or is out of range.
Set up call forward (example):
The most common condition for call
forward is:
80
mSetup
No reply
Clear All
L
A call is only forwarded after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
All set diversions are cleared.
Additional information
Note that the forward is stored in the net-
work and not in the phone (for example
when the SIM card is changed).
Busy
Forward occurs if a call is in progress.
If Call Waiting is activated (p. 79), you
will hear the call waiting tone during
a call.
Check condition or delete it
First select the condition.
§Select§
Check Status
Select.
Press.
Receiving Fax
Fax calls are forwarded to a
number with a fax connection.
L
Or
Delete
Select.
Receiving Data
L
Reactivate forward
Data calls are forwarded to a
phone number with a PC connec-
tion.
The last forward has been stored. Proceed
as with "Set forward". The stored phone
number is displayed. Confirm phone num-
ber.
Status Check
Edit phone number
Proceed as with "Set forward". When the
stored number is displayed:
You can check the current forward
status for all conditions.
After a short pause, the current situ-
ation is transmitted by the network
and displayed.
§Delete§
Press. The phone number is
deleted.
Enter new number and confirm.
p
Condition set.
Not set.
o
Display if status is
unknown (e.g. with a new
SIM card).
s
81
mSetup
§Menu§KmKPhone Setup
Auto Off
KSelect function.
The phone switches off each day at
the set time.
Fact. Settings
The phone is reset to the default val-
ues (factory setting) (does not apply
to SIM card or network settings).
Activate:
§Time§
Press.
Enter time
J
(24-hour clock).
Alternative input in standby mode:
A
# 9 9 9 9 #
§OK§
Confirm.
*
Deactivate:
§Manual§ Press.
§OK§ Confirm.
Defrag FileSys
(Phone code protected)
Format
The file system memory is formatted
and all data that has been saved is
deleted, including Addressbook, ring
tones, organizer entries, etc. Save
important data in advance (p. 123).
Clean Up
The file system is defragmented.
Phone Identity
The phone identity number (IMEI) is
displayed. This information may be
useful for customer service.
Alternative input in standby mode:
# 0 6 #
*
Check software version p. 120.
82
mSetup
§Options§
Set
.
Open menu
Clock
§Menu§KmKClock
Set time zone.
KSelect function.
Rename
Assign a new name to time
zone.
Time/Date
The clock must be set to the right
time once at start-up.
DST
Activate/deactivatedaylight
saving. When daylight sav-
ing is activated a sun icon
appears on the display.
§Edit§
Press.
Auto Time-
The time zone is switched
automatically to local time
by the network.
First enter the date (day/
month/year), then the
time (12 hours, including
seconds).
J
zone
L
View
Display the selected time
zone with name and date.
Additional information
Date Format
DD.MM.YYYY or MM/DD/YYYY
If the battery is removed for longer than
approx. 30 seconds, the clock must be
reset.
Setting date format:
Time Format
Format 24h or Format 12h.
DD:
Day (2-digit)
MM:
Month (2-digit)
Show Clock
YYYY: Year (4-digit)
Activate/deactivate time display in
standby mode.
Time Zones
Set the time zone for your area.
Select the required time
F
zone from list ...
§Set§
... press to set.
83
mSetup
Data Counter
Connectivity
Display of information on connec-
tion status.
§Menu§KmKConnectivity
KSelect function.
GPRS
IrDA
L
Your phone has an infrared inter-
face. You can use this to exchange
data (Addressbook entries, business
card, SMS, organizer entries) with
other devices that are also equipped
with an infrared interface.
(General Packet Radio Service)
GPRS is a new method for transmit-
ting data faster in the cell phone net-
work. Use GPRS and if the network
has sufficient capacity, you can be
connected to the Internet perma-
nently. Only the actual transmission
time is charged by the network
operator.
The infrared interface is on the right
side of the phone. The distance
between the two devices must not
exceed 30 cm. The infrared windows
of the two devices should be placed
as close to one another as possible.
Some service providers do not yet
support this service.
§Yes§ / §No§ Activate or deactivate
§Change§ Activate/deactivate IrDA.
GPRS function.
Shown on the display:
Shown in display:
ꢉ
When activated.
«
ª
ꢈ
Activated and available.
Logged on.
¬
During the transfer.
Connection briefly lost.
84
mSetup
For GPRS
§Menu§KmKConnectivity
(General Packet Radio Service)
KSelect function.
GPRS settings
Data Services
Select.
For the MMS, WAP and Mail,Java,Rms
applications at least one connection
profile must be set up and activated.
You can activate GPRS for the profile
can only start to use GPRS once you
have activated GPRS on your phone
(p. 83).
G
Select profile.
§Options§ Open menu.
§Edit§
Press.
Change Sett.
APN:
Select, then:
Enter service provider
address.
For CSD (Circuit Switched Data)
CSD settings
Login name:
Password:
Enter login name.
Select.
Enter password (shown
as a series of asterisks).
If it has not been pre-installed, enter
the data or enter the required set-
tings (your service provider will sup-
ply you with information on this):
DNS1 / DNS 2:
(optional).
§Save§
Save settings.
§Edit§
Press.
Enter ISP number.
HTTP Profile
Preparation of the phone depends
on current service provider:
Dial-up
number
Call type:
• The settings have already been installed
by your provider. You can start immedi-
ately.
Select ISDN or analog.
Enter login name.
Login name:
Password:
Enter password (shown
as a series of asterisks).
• Access profiles have already been set by
your provider. Then select and activate
profile.
DNS1 / DNS 2:
(optional).
• The access profiles must be set manually.
§Save§
Save settings.
If necessary, check with your service
provider for details.
85
mSetup
§Menu§KmKConnectivity
Send Voice/Fx
L
KSelect function.
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Fax/Data Mod.
Fax/data mode using a PC
While the connection is being set up,
the following function is available
for two seconds:
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
fax and data communication must
be available on your PC and there
must be a connection to the phone.
§Voice/fx§ Switch to Send Voice/Fx
mode; you may now send
a fax.
Voice/Fax Rec
(Only if no special fax or data number
is available).
Start the required communication
program on your PC and select the
function on the phone during the call
(the PC will take over the connec-
tion).
Fax and data services must be
enabled by the service provider.
There are variations in fax and data
reception, depending on the net-
work. Please ask your service pro-
vider about this.
§Change§ Set the required mode.
Rec Fax/Data
L
End transmission
End transmission with PC software
Your service provider has given
you a number for telephoning and a
fax/data number.
and/or press
.
B
The call is signaled by a special ring
tone and the type of call (fax or data)
is displayed.
Authentication
§Edit§
Activate encrypted WAP
dial-up (CHAP Challenge
Authentication Proce-
dure) or deactivate it (PAP
Personal Authentication
Procedure).
Now start the communication pro-
gram in your PC to receive the fax/
data.
86
mSetup
§Menu§KmKSecurity
Security
§Menu§KmKSecurity
The phone and SIM card are pro-
tected against misuse by several
security codes.
KSelect function.
Barrings
Barring restricts the use of your SIM
card (this is not supported by all ser-
vice providers). You need a 4-digit
password which your service pro-
vider will give you. You may need to
register each barring separately with
your service provider.
KSelect function.
L
Codes
PIN Control, Change PIN, Change PIN2,
Chg.Phonecode (p. 24).
All outgoing
All outgoing calls except emergency
number 911 are barred.
Only ‚
(PIN 2 protected)
L
Dialing options are restricted to SIM-
protected phone numbers in the
Phonebook. If only area codes are
entered, relevant phone numbers
can be added to these manually
before dialing.
Outgo internat
Only national calls can be made.
Out.int.x home
International calls are not permitted.
However, you can make calls to your
home country when abroad.
If the SIM card does not support PIN
2 input, the whole Phonebook can be
protected with the phone code.
All incoming
The phone is barred for all incoming
calls (forwarding of all calls to mail-
box provides a similar effect).
This SIM Only
(Phone code protected)
L
When roaming
By entering a phone code, the phone
can be linked to a SIM card. Opera-
tion using a different SIM card is not
possible without knowing the phone
code.
You do not receive calls when you
are outside your home network. This
means that no charges are incurred
for incoming calls.
If the phone is to be used with a dif-
ferent SIM card, enter the phone
code when requested.
87
mSetup
Status Check
Network
The following information can be
displayed after a status check:
§Menu§KmKNetwork
KSelect function.
p
Barring set.
Line
L
o
Barring not set.
This function is only displayed if it is
supported by the service provider.
Two separate phone numbers must be
registered on the phone.
Status unknown (e.g.
new SIM card).
s
Clear All
All barrings are deleted. A password
which the service provider will give
you is needed for this function.
Select
Select phone number in current use.
Display current phone
‘
Additional information
number.
Settings for phone numbers ............p. 120
Block line
(Phone code protected)
You may limit usage to one phone
number.
Network Info
The list of GSM networks currently
available is displayed.
Indicates forbidden ser-
²
vice providers (depending
on SIM card).
88
mSetup
Your service provider is displayed:
Choose Network
L
§List§
Display list of preferred
networks.
Network search is restarted. This is
useful if you are not on your home
network or want to register on a dif-
ferent network. The network list is
rebuilt when Auto Network is set.
Create new entry:
• Select empty line, press §Entry§, then
select another entry from the list of service
providers and confirm.
Auto Network
L
Change/delete entry:
Activate/deactivate, see also Choose
Network above. If "Automatic net-
work" is activated, the next network
on the list is dialed in ranking order
of your "preferred networks". Alter-
natively select a different network
manually from the list of the avail-
able GSM networks.
• Select entry, press §Change§, then select
another entry from the list of service pro-
viders and confirm or press §Clear§.
Band selection
Select either GSM 900, GSM 1800 or
GSM 1900.
L
Pref. Network
L
Fast Search
When this function is active, net-
work reconnection is speeded up
(and standby time is reduced).
Enter your preferred service provid-
ers here for when you leave your
home network (e.g. if there are dif-
ferences in price).
Additional information
If the signal strength of the preferred net-
work is inadequate when you switch on the
phone, the phone may register in a different
network. This can change when the tele-
phone is next switched on or if another net-
work is selected manually.
89
mSetup
§Menu§KmKNetwork
Accessories
KSelect function.
§Menu§KmKAccessories
User Group
KSelect function.
L
Depending on service provider, you
can create groups with this service.
These can have access to internal
(company) information, for exam-
ple, or special tariffs apply. The
details can be clarified with your ser-
vice provider.
Car Kit
Only in combination with an original
Siemens handsfree Car Kit (p. 131).
The profile is activated automatically
as soon as the phone is inserted into
the cradle.
User-definable settings
Auto Answer
(factory default: off)
Calls are accepted automatically
after a few seconds. Eavesdropping
is possible!
Active
Activate/deactivate function. "User
group" must be deactivated for nor-
mal phone use (phone code, p. 23).
Select Group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are
obtained from your service provider.
Message in display.
±
Auto Off
Outgo. Access
(factory default: 2 hours)
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
The phone is powered by the car's
power supply. You can adjust the
time between switching off the igni-
tion and the automatic switching off
of the phone.
Car Loudspk.
Choose a different audio setting if
desired for your Car Kit.
Preferred Grp
If activated, only calls within this
standard user group can be made
(depending on the network
configuration).
90
mSetup
Automatic settings:
ProSlide
• Permanent illumination: switched on.
• Key lock: switched off.
§Menu§KmKProSlide
KSelect function.
• Charging the phone battery.
Volume
• Automatic activation of the Car Kit profile
when phone is inserted in cradle.
Adjust the volume of the music
when opening and closing the
keypad.
Headset
Only in conjunction with an original
Siemens headset (p. 130). The pro-
file is automatically activated when
headset is plugged in.
Open. Melody
Set the music to be played when the
keypad is opened.
User-definable settings
Auto Answer
(factory default: off)
Closing Melody
Set the music to be played when the
keypad is opened.
Calls are accepted automatically
after a few seconds (except where
the ringer is switched off or set to
beep). You should therefore be
wearing the headset.
ProSlide Lock
Enable/disable automatic keylock
when closing keypad. The keys are
alwaysunlockedautomaticallywhen
opening the keypad.
Eavesdropping is possible!
Automatic setting
Accept call with Call key or PTT key
(Push To Talk), even when key lock is
activated.
Auto answer
If you do not notice that your phone has
accepted a call, there is the danger that the
caller may eavesdrop.
91
~Profiles
phone profile in order, for example,
to adapt the phone to the surround-
ing level of noise.
iles Several settings can be stored in a
Setup
Edit a default profile or create a new
personal profile:
• Five standard profiles are provided with
default settings. They can however be
changed:
G
Select profile.
§Options§ Open menu.
Normal Env.
Quiet Env.
Noisy Env.
Car Kit
Change Sett.
displayed:
Ringer Setting....................................p. 76
Volume..............................................p. 76
Ringtones..........................................p. 77
Vibrating Alert....................................p. 76
Call Screening...................................p. 77
Info Tones .........................................p. 77
Key Tones .........................................p. 77
Illumination........................................p. 75
Big Letters .........................................p. 75
Headset
• You can set two personal profiles
(<No Title>).
• The special profile Aircraft Mode is fixed
and cannot be changed, (p. 92).
Activate
§Menu§K~
Select default profile or
G
When you have finished setting a
function, return to the profile menu
where you can change a further
setting.
personal profile.
§Activate§ Activate profile.
¾
½
¾
Normal Env.
Quiet Env.
Noisy Env.
Activate
Options
½
Active profile.
92
~Profiles
Profile menu
Aircraft Mode
All alarms (appointments, alarm
clock) are deactivated. This profile
cannot be modified. The phone will
switch off if you select this profile.
§Options§ Open menu.
Activate
Activate selected
profile.
Change Sett.
Copy From
Rename
Change profile
settings.
Activate
Scroll to Aircraft Mode.
G
Copy settings from
another profile.
§Select§
Activate profile.
Change personal pro-
file (except default
profiles).
A security prompt must be
confirmed.
The phone switches itself
off automatically.
If a Siemens original Car Kit is used
(p. 131) the profile is activated auto-
matically as soon as the phone is
inserted into the cradle (p. 89).
Normal operation
When you switch on your phone
again, the previously set profile will
be reactivated automatically.
Headset
used (p. 130), the profile is activated
automatically as soon as the headset
is used (p. 90).
93
Favorites
s
§Menu§
Press.
Change Sett.
§Favorit.§ Press.
You can replace each entry (1–10)
with another entry from the selec-
tion list of Favorites.
Create your own menu with fre-
quently used functions, phone num-
bers or WAP pages.
Select the required entry.
G
The list of 10 possible entries is pre-
set. You can, however, change it as
you want.
§Options§ Press.
Change Sett.
Select.
For fast access from standby mode you can
set the function Favorites on the left soft
key (p. 110).
§Set§
Press.
Select the new entry from
the selection list.
G
§Set§
Press.
Activate
If you have selected a phone number
or a WAP favorite as a new entry, the
corresponding application is started.
Select the required entry.
G
§Select§
Press.
Or
Reset All
§Options§ Press.
Reset All Select.
§Options§ Press.
Activate Select.
§Select§
Press.
After confirmation and entering the
phone code, the default entries are
reset.
Or
If the entry selected is
a phone number, you
can also call it with the
Call key.
A
94
çOrganizer
a-
Weekly overview
Calendar
Tu
Aug 2003 W32
§Menu§KçKCalendar
M
T
W
T
F
S
S
You can enter appointments and
tasks in the Calendar. It offers a
• monthly overview,
• weekly overview,
• daily overview.
Day
Agenda
Scroll by the hour from
0:00 to 24:00 hours.
Time and date must be set for the
Calendar to work correctly (p. 82).
H
Scroll between days.
Monthly overview
§Day§
Display the daily over-
view.
Tu
Aug 2003 W32
Daily overview
Tu
Aug 2003
W32
Week
Agenda
G
Scroll between weeks.
Scroll between days.
Display weekly view.
Month
Agenda
H
Each day is divided into six blocks of
four hours (morning + afternoon).
§Week§
§Agenda§ List of the day's appoint-
H
Scroll between days.
ments and tasks.
Additional information
Additional information
Calendar days in bold face indicate
appointments or birthdays (p. 96) on this
day.
You can use the plus/minus side key on the
phone to scroll between the months or
weeks depending on the current overview.
Appointments are displayed
by vertical bars.
Time overlaps in appointment
entries are highlighted.
95
çOrganizer
Agenda
Delete Until
Delete all entries prior to a
certain date.
§Agenda§ Select in the current over-
view.
Delete done
Mark
Delete all completed tasks.
Tue 04.25.2003
<New Entry>
Activate highlighting mode,
the entry currently selected
q 20:00 Cinema
w
v
i
Mark All
all entries are highlighted
(p. 117).
View
Options
Appointments (p. 96) and where
applicable any open tasks (p. 98) for
the current day are displayed in chro-
nological order in the agenda.
Send/Print...
Import
(p. 114)
Import tasks and appoint-
ments via IrDA in vCal for-
mat (p. 114).
<New Entry>
Create new entry as appointment or
as task.
Capacity
Display available capacity.
Options
Different functions are provided,
depending on the Calendar item
selected or the current organizer
function:
§Options§ Open menu.
View
Done
Display entry.
Change task to "com-
pleted".
Edit
Open the entry to edit.
New Entry
Create new entry as
Appointment (p. 96) or
Task (p. 98).
Delete
Delete selected entry.
Delete All
Delete all entries after
confirmation.
96
çOrganizer
Additional information
For additional Calendar settings, see below
under Setup.
Appointments
§Menu§KçKAppointments
All appointment entries are dis-
played in chronological order. If an
alarm is missed it appears in the list
of missed appointments (p. 100).
Appointment with "alarm activated".
Appointment with "alarm deactivated".
i
j
o Task.
r Priority task.
List according to type
Types
p Task completed.
q Task deadline exceeded.
Synchronizing with a PC
Types of appointments
are displayed.
With XTNDConnect® PC (p. 123) you can
synchronize your appointments with
your phone with an organizer stored on the
Internet (p. 108). For this a time zone must
be set (p. 82).
Select appointment type.
G
§Select§
Show all entries for the
selected type.
Enter new appointment
Select <New Entry>.
G
Make the entries field by
field.
Calendar settings
F
§Menu§KçKCalend. Setup
§Edit§
Browse through displays
in the selection fields.
Show Birthday
Birthdays (and other events) are
shown in bold face.
Y New Entry
Type:
§Memo§
Description:
Begin of Week
You can set which weekday is listed
first on the left in the monthly and
weekly overviews.
Change
Save
97
çOrganizer
Type:
Alarm:
Memo.
§ON§
Activate alarm.
u
Description with up to
50 characters.
Enter start time of the
J
alarm before the appoint-
ment.
Speech Memo.
x
Select:
Record a voice memo at
the end of the input pro-
cedure (see also p. 101).
Minutes, Hours, Days.
Reoccurrence:
Select a timeframe for repeating the
appointment:
Call.
v
w
Enter phone number.
Shown with alarm.
No, Daily, Weekly, Monthly, Annual.
Enter a parameter for repeating:
Forever, Until, Occurrences (number)
Meeting.
Description with up to
50 characters.
If Weekly is selected, certain week-
days can be highlighted.
Description:
Display in the agenda list.
§Save§
Save the appointment.
The alarm is automatically
activated. If Speech Memo
dictating machine is
started for recording
(p. 101).
Location:
Location of appointment, e.g. meet-
ing room.
Start date:
Start time:
End date:
End time:
98
çOrganizer
Alarm
Tasks
When the set date and time are
visual alarm. If an alarm is missed it
appears in the list of missed appoint-
ments (p. 100).
§Menu§KçKTasks
A task is displayed like an appoint-
ment in the agenda of the selected
day. However, unlike an appoint-
ment it does not require a time.
When no time is entered the task
appears at the top of the list every
day until it is marked as completed.
Alarm type Memo/Meeting: the text is
shown in the display.
Alarm type Call: the phone number is
displayed for dialing.
ç Tasks
Alarm type Speech Memo: playback
with dictation key.
<Types>
<New Entry>
§Pause§
The alarm stops for
5 minutes.
o 04.25
21:15 w
Select
§Off§
The alarm is stopped.
Additional information
Display indicating that alarms are set:
List according to type
<Types> Types of appointments
Alarm clock.
Appointment.
An alarm sounds even when the phone is
switched off (the phone does not switch to
standby mode). Press any key or close and
open the keypad to disable it.
Ö
are displayed.
Ø
Select appointment type.
§Select§
Show entries for the
selected type.
Set alarm tone...................................p. 76
Clock................................................. p. 82
§Options§...........................................p. 95
Enter new task
Select <New Entry>.
G
Select appointment type
(see appointments,
p. 96).
G
Description:
Display in the list.
Status:
Choose between: Done or Outstanding
99
çOrganizer
Priority:
New entry
Select between 1 (high) – 5 (low).
Default is 3.
§Select§
Press.
Enter text, 150 characters
maximum.
Date in use:
When Yes is selected, the following
option is provided.
J
§Options§ Open menu.
Due date:
Save
Store entry.
Enter date.
Text entry menu
Due time:
Enter time.
§Options§ Open menu.
Alarm:
Save
Store entry.
Enter a time (0–99) and a time unit
(minutes, hours, days) at which an
audible/visual notification of an
impending task should be made.
T9 Input
(p. 32)
T9 Preferred: Activate/
deactivate T9.
Input language: Select
language for text.
§Save§
Save task.
Line Feed
Enter line break.
Delete note.
Notes
Delete Text
§Menu§KçKNotes
Send via
SMS
Send entry as SMS
message.
Use your phone as a notepad.
Insert From...
Insert phone number from
Addressbook.
ç Notes
<New Entry>
Shopping list
Flight number
Select
100
çOrganizer
Display entry
Additional information
Protect confidential data using a phone
code.
We recommend that you do not store any
passwords (PIN, TAN etc.) as notes.
Select entry.
Open note.
G
§View§
Notes menu
A total of 500 entries can be stored
(appointments, tasks, notes) in the orga-
nizer.
§Options§ Open menu.
Enter special characters....................p. 31
View
Display entry.
Confidential
Protect note with phone
code (p. 23).
Missed Alarms
§Menu§KçKMissed Alarms
Edit
Display entry for editing.
Create new note.
Delete entry.
Events with an alarm to which you
have not reacted are listed for
reading.
New Entry
Delete
Y Missed Alarms
Delete Until
Delete all entries prior to a
certain date.
j
03.03
21:15 w
q 03.05
12:30
18:00
u
v
Delete All
Mark
mation.
j
03.05
View
Options
Switch to highlighting mode
(p. 117).
Missed Alarms menu
Mark All
Activate highlighting mode,
all entries are highlighted
(p. 117).
§Options§ Open menu.
Send via
SMS
Send entry as SMS mes-
sage.
View
Display entry.
Delete entry.
Delete
Delete All
Capacity
Display available capacity.
Delete all entries after con-
firmation.
Send/Print...
(p. 114)
101
çOrganizer
Control using the side keys
Voice Memo
The voice functions can be con-
trolled quickly and easily in standby
mode using the side keys.
Use the dictating machine to record
short voice memos.
• Use your phone as a dictating machine
when on the move.
Record/play
back
(dictation key)
for others.
• Add a voice memo to an alarm in the Cal-
endar (p. 97).
Loud
• Record a call - useful for remembering
numbers or addresses.
Quiet
Warning!
New recording
The use of this feature may be subject to
restrictions under criminal law.
Please inform the other party to the conver-
sation in advance if you want to record the
conversation and please keep such record-
ings confidential.
Press the dictation key for the dura-
tion of the recording. The maximum
possible recording period is shown.
Recording starts after a short beep.
Pause
You may only use this feature if the other
party to the conversation agrees.
Release the dictation key for a maxi-
mum of 10 seconds to pause record-
ing. If you press the key again,
recording is resumed, otherwise it is
stopped.
Save
Recording is stopped if you release
the dictation key for more than
10 seconds.
§Stop§
End recording.
Recording is automati-
cally saved with a time
stamp.
§Save§
§OK§
Name recording.
Save recording.
102
çOrganizer
Play back
Voice Memo
x
In standby mode, press the dictation
key briefly. If the Options menu is
set up that way, Speakerphone will be
offered.
<New Record>
Customer query
Shopping
Select
Operation with soft keys
New recording
G
Select recording.
Press.
§Menu§KçKVoice Memo
§Play§
The list of recordings is opened.
Voice Memo menu
<New Record>
Select.
§Options§ Open menu.
§Record§ Start recording
§Pause§ Recording pause.
Play
Play recording back.
§Stop§
End recording.
Speaker-
phone
Activate/deactivate play-
back in handsfree mode.
Recording is automati-
cally saved with a time
stamp.
New Record
Delete
Start new recording.
Delete selected recording.
§Save§
§OK§
Name recording.
Save recording.
Delete All
Delete all entries after
confirmation.
Or
§Play§
Rename
It can be generic renaming
of a file instead of specific
renaming from time/date
stamp.
Play back recording
before storing it.
Play back
§Menu§KçKVoice Memo
Time Zones
The list of recordings is opened.
§Menu§KçKTime Zones
Set the time zone for where you cur-
rently are (p. 82).
103
[Extras
[
as §Menu§K
Calculator
KSelect function
Enter number (up to
8 digits).
J
Alarm Clock
The alarm will ring at the time set by
you, even when the phone is
switched off.
Select calculator
function.
Setting
Repeat procedure with
other numbers.
§Change§ Display selected time and
J
days for alarm calls:
Set time for the alarm call
(hh:mm).
Result is displayed.
#
Calculator functions
H
Navigate to the days.
§. =§+ - * /§ Press the right soft key
repeatedly.
§Change§ Set days for alarm calls.
±
%
Toggle between "+" and "-".
Convert to percentage.
§OK§
Confirm settings.
y Alarm Clock
Ï
Save the number displayed.
Retrieve the number saved.
Exponent (max. two digits).
Ð
z 07:30
e
Mo Tu We Th Fr Sa Su
Special keys:
*
Edit
On
Set decimal point.
Add (hold down).
0
§On§ / §Off§ Activate/deactivate the
alarm.
Additional information
y
Alarm clock switched on.
Alarm clock switched off.
Screen display in standby
mode: Alarm clock activated.
z
Ö
104
[Extras
[
§Menu§K
Currency Conv
Any combination of calculations can
be carried out between the curren-
cies entered.
L
KSelect function.
L
Stopwatch
Two intermediate times can be
recorded and saved.
Select a combination of
G
currencies from the list.
§Start§
J
Confirm.
Stopwatch
æ
Enter amount
(up to 12 digits).
00:00:00:000
Result is displayed.
#
§Repeat§ Repeat conversion
Start
Options
with other data.
§Reset§
#
*
Reset to zero.
Start/stop.
Calculator menu
§Options§
.
Open menu
Start
Enter value to be
calculated.
Intermediate time.
Control using side keys:
New Entry
Change
Delete
Enter two new currencies.
Change the two currencies.
Delete the two currencies.
Start/stop
(dictation key)
Delete All
Delete all currency pairs
after confirmation.
Intermed. time
plus/minus
(
)
side key top
105
[Extras
Stopwatch menu
Camera (Accessories)
ately view, save and send photos you
have taken with the Mobile Camera
IQP-511 (p. 130).
§Options§ Open menu.
Save
Record the time(s) mea-
sured and assign a name to
them.
Shots can be taken in two different
formats:
Reset
Reset stopwatch.
• Low resolution: QQVGA 160x120 pixels,
memory size up to 6 KB to send as a pic-
ture message (p. 53).
Stopwatch
List
Display the stored times.
View Display the stored
times and intermediate
times.
Rename Rename stored
entry.
Delete Delete entry.
Delete All Delete list.
• High resolution: VGA 640x480 pixels,
memory size of one shot up to 40 KB - e.g.
for further editing on PC. To allow the pic-
ture to be viewed on the phone display, a
QQVGA picture is created for every VGA
shot.
§Camera§ Press when the camera
has been attached (in
standby mode).
L
Countdown
A set time elapses. The last
Or
3 seconds are indicated by a beep. At
the end a special beep sounds.
[
§Menu§K KCamera
First the number of shots still avail-
able is shown (depends on resolu-
tion chosen).
§Set§
Set period of time.
Start counter.
§Start§
§Stop§
§OK§
Confirm.
Interrupt counter.
The last shot taken is shown.
§Change§ Change period of time.
G
Scroll through photos.
§Reset§
Reset counter to starting
time.
106
[Extras
Shot
Camera menu
A shot (especially in high resolution)
requires a few seconds to be pro-
cessed.
§Options§ Open menu.
Use Flash
Use flashlight (only when
camera is plugged in)
Press the plus/minus side key at the top.
You will hear an advisory tone when
the exposure time has expired. The
photo is shown on the display and
saved automatically.
Full screen
Delete
Switch to full screen mode.
Delete current picture after
confirmation.
Delete All
Move
Delete all pictures after
confirmation.
Flash
The flash function can be activated/
deactivated in the option menu.
Move currently selected
picture to another folder
(if necessary, first choose
resolution). See also File
Manager, p. 112.
If the flash is switched on from
"Options", the flash is charged
before taking a picture:
Press the plus/minus side key at the top
Move all
See above.
briefly. The flash is loaded.
Send via ...
Send picture by:
MMS (only low resolution),
e-mail, IrDA.
Press the plus/minus side key at the top
again. The photo is taken with the
flash.
Info
Display number of shots
still available.
Additional information
Photograph without flash when the function
Use Flash is switched on:
Hold down the plus/minus side key at the
top. The charging process for the flashlight
is omitted and a shot is taken immediately.
Setup
Set resolution:
Low
High & Low
Set display:
Full screen
107
[Extras
Voice command
Additional information
If the memory is full or the camera is not
attached:
Functions can be started by a voice
command. A maximum 20 voice
recordings for voice dialing or voice
commands can be saved in the
phone (not on SIM card!).
§Delete§
Delete picture currently
shown.
#
*
Toggle between reduced/full
screen.
Set display lighting.
Record
[
§Menu K KVoice command
A list with the functions available is
displayed.
G
Select a function.
§Record§ Press.
§Yes§
Confirm selected
function.
§Start§
Start recording.
A short signal sounds. Now say the
command corresponding to the
function and repeat it when
prompted.
Apply
Hold down the plus/minus side key at
the bottom (in standby mode).
A short signal (beep) sounds and a
prompt appears in the display. Now
say the function.
Noisy environments may affect voice rec-
ognition.
108
[Extras
Voice command menu
Remot[e synchronization
§Menu§K KRemote Sync.
Highlight required entry.
G
§Options§
Play
You can use this function remotely
to access externally filed data
(addresses, calendar, etc.) and syn-
chronize these with the data on your
phone. The data can, for example,
be saved on a company computer or
the Internet.
.
Open menu
Play back the recording
belonging to the entry.
New
sample
Start new recording for an
entry.
Delete
Delete entry.
Synchronize
Delete All
Delete all recordings.
§Start§
Computer is selected and
synchronization started.
Sync. setting
§Setup§
Start synchronization.
Sync. Profile
A number of profiles can be defined.
G
Select profile.
§Options§ Open menu.
Change Sett.
Select.
Highlight database areas to be
synchronized:
Calendar
Contacts
Notes
Tasks
Server Setting
Different functions are offered
depending on the situation:
109
[Extras
Activate remote sync. profile
Sync. mode
Sync. setup Select.
Fast: Only data that has
changed will be synchro-
nized in both directions.
Slow: All data will be syn-
tions.
Sync. Profile
Select.
G
Select profile.
§Activate§ Activate. The current pro-
Provider
Home
Select or set access profile
(p. 84).
file is selected.
Additional information
On the Internet under
e. g. http://
www.my-siemens.com/
s56sync
Port:
Enter port number, e.g. 80.
L
SIM services
(optional)
Login
name:
Enter user name (Login
name).
Password:
Enter password (shown as
a series of asterisks).
Your service provider may offer spe-
cial applications such as mobile
banking, stock prices, etc. via the
SIM card.
Calendar
path
Folder name with
path details.
Address
path
Notes path
Task path
If you have such a SIM card, the SIM
services will appear in the main
menu under "Extras" or directly
above the control key (on the left).
HTTP
Depends on server pro-
vider.
Symbol for SIM services.
}
authent.
Where there are several applications,
these are displayed in a SIM services
menu.
§Save§
Save settings.
§Menu§K KSIM services
[
With the SIM services menu, your
phone is ready to support future
additions in your service provider's
user package. For further informa-
tion, please contact your service pro-
vider.
110
ess The left soft key and the number
keys 2 to 9 (speed dialing numbers)
can each be assigned an important
phone number or a function. The
phone number can then be dialed or
the function started at the touch of a
button.
Drafts.................................................p. 50
T9 Input .............................................p. 74
IrDA...................................................p. 83
Remote Sync...................................p. 108
Phonebook........................................p. 36
Addressbook .....................................p. 39
Businesscard.....................................p. 41
Calendar............................................p. 94
Appointments ....................................p. 96
Tasks.................................................p. 98
Agenda..............................................p. 95
Notes.................................................p. 99
Camera (Accessories).....................p. 105
<Empty>
Additional information
The left soft key may already have a
function allocated by your service provider
(e.g. access to }SIM card services). It
may not be possible to modify this soft key
assignment.
The left soft key may also sometimes be
replaced automatically by ]/\to
access a new message.
Key assignments available:
Internet (WAP) ..................................p. 68
Phone number ..................................p. 39
Alarm Clock.....................................p. 103
New SMS..........................................p. 47
Illumination........................................p. 75
Hide ID..............................................p. 79
Missed Calls......................................p. 44
Received Calls..................................p. 44
Inbox (SMS)......................................p. 50
Favorites ...........................................p. 93
Call Screening...................................p. 77
File Manager...................................p. 112
ProSlide ............................................p. 90
Bookmarks........................................p. 68
Games & More..................................p. 71
Call Forward......................................p. 79
New MMS .........................................p. 53
New E-mail........................................p. 59
Assign a function/phone number to
the left soft key for fast access.
_
g
Service provider
04/25/2003
23:45
Internet
Menu
list.
• Assign a new application (e.g.
New SMS) to the soft key.
111
Fast access key
• Special case Phone Number. Pick out a
name (e.g. "Carol") from the Phonebook/
Addressbook to assign to the soft key.
Special case Bookmarks.
Scroll to a URL in the
bookmark list for assign-
ment to the key.
§Select§
Confirm setting.
§Select§
Confirm setting.
Apply
Apply
The setting "Carol" is used here only
as an example.
Select a stored phone number or
start a stored application (e.g. New
SMS).
§Carol§
Hold down.
In standby mode:
3
Press briefly.
Speed dialing keys
The assignment of the number key 3
is displayed above the right soft key
e.g.:
speed dialing numbers for fast
ments see p. 110. Number key 1 is
reserved for the mailbox number
(p. 45).
§New SMS§ Hold down.
Or simply
Hold down.
3
Edit
In standby mode:
Press a number key
J
(2–9). If the key is not yet
assigned:
§Set§
Press.
Or
§New SMS§ Press briefly (if New SMS is
assigned for example).
§Edit§
Scroll to application in the
list.
Special case Phone
Number. Pick out a name
from the Phonebook/
Addressbook for assign-
ment to the key.
112
ÑFile Manager
Man- To organize your files, you can use
the file system like a PC file manager.
The file system assigns special fold-
ers to different data types.
Index structure
The file system assigns special fold-
ers to different data types.
In order to protect content from
being copied, two types of folders
have been created: 1) Unprotected
folders titled MyData and its sub-
folders and 2) Protected folders.
ion
(anim)
*.gif
Camera Photos (p. 105)
*.jpg
*.col
Color
Color scheme
scheme (p. 74)
Data stored in the MyData folders
can be sent out of the phone using
MMS or email.
Data
objects
Inbox
Data that is received using WAP will
be automatically stored in a pro-
tected folder based on the type of
content, sound, graphic, etc.
Internet Browser files
(miscellaneous)
Misc
Other files
*.*
Pictures Pictures (p. 53)
*.bmp
*.jpg
*.gif
§Menu§KÑ
A list of the folders and files is
displayed.
*.png
Sms
Sub-folders:
*.smo
*.smi
Navigate through this list using the
control key:
Inbox:
Incoming mail
Scroll up and down.
G
Draft:
Drafts
Go back from folder.
C
Unsent:
Unsent SMS
messages
Sent:
Sent SMS
messages
§Open§
Open folder or execute
file with related applica-
tion
or
with unknown file types:
Highlight file.
Tones&
Alerts
*.mid
*.amr
*.mmf
Ring tones, melo-
dies and sounds
§Mark§
Text
Text files
*.txt
Text
modules
Text modules
*.tmo
113
ÑFile Manager
File system menu
Voice
memo
Voice recordings
*.vmo
§Options§ Open menu
Java
Applications
Data.
Download link.
*.jad
*.jar
*.db
Open
Move
Open folder.
Place highlighted file or folder
in temporary memory.
MyData
Copy
Paste
Copy highlighted file to tem-
porary memory.
Transfer content of tempo-
rary memory to current
folder.
Delete
Delete All
Mark
Delete current entry.
Delete all entries.
See highlighting mode
(p. 117).
Mark All
All entries highlighted, see
highlighting mode (p. 117).
New
Folder
Create a new folder and give
it a name (only one folder
depth available).
Rename
Sort
Change highlighted entry.
Set sort criteria (alphabetical,
type, time).
Attributes
Drive Info
Display information on file or
folder selected.
Display the capacity used
and available.
114
Print via.../Send via ....
../ The phone provides you with several
Set import mode on receiving
phone.
methods for sending, receiving or
printing texts and data via different
transmission routes. Access to these
functions is available in the option
menu of the relevant application.
These menu items can vary depend-
ing on the application. Please make
sure you use the ANSI character set
for transmission purposes. Your
printer has to be set to the correct
conversion table (code page) in
order to display special characters
correctly.
....
To receive via IrDA
Please turn on IrDA to receive (p. 83).
Via SMS/vCard
Phonebook and Addressbook entries
as well as appointments can be sent
as an SMS to other suitable cell
phones.
With larger items, several SMS mes-
sages may be generated and sent as
a concatenated message.
IrDA (Infrared)
Activate IrDA, p. 83.
Application option:
Send/Print...KVia IrDA
Via SMS/Text
Business cards, Addressbook entries
or appointments can be sent as text
messages by SMS (this may result in
several being generated).
§Send§
The data is sent via the
selected transmission
route.
Import
§Print§
The data is sent to the
connected printer.
Enable transmission to receive sev-
eral objects in succession via IrDA.
All via IrDA
Data objects
Files received via IrDA or SMS are
stored in the file system (p. 112).
Application option:
Send/Print...KAll via IrDA
All entries from the Phonebook,
Addressbook and organizer are sent
or printed via the infrared port.
§Send§
§Print§
See above.
See above.
115
Notes A-Z
Z
Control codes (DTMF)
Copy protection
Applications can be copy-protected.
Applications protected in this way
can only be executed on specially
designated devices. It is possible,
however, to create a backup copy of
these applications on the PC at any
time using the "Siemens Data Suite"
(p. 123).
Sending control codes
You can enter control codes (digits)
during a call so that an answering
machine can be controlled remotely.
These digits are directly transmitted
as DTMF tones (control codes).
y menu§ Open call menu.
Send DTMF
Dial-up access CSD
Select.
(Circuit Switched Data)
Use the Phonebook
Save phone numbers and control
codes (DTMF tones) in the Phone/
Addressbook like a normal entry.
Data transfer is made via a data con-
nection to a default IP address of
your network provider or service pro-
vider. This connection can be used
for the exchange of data (e.g. for
access to the Internet or for down-
loading games and applications as
well as for using WAP services).
Enter phone number.
J
Press until a "+" appears
on the display (pause for
connection setup).
0
As long as this connection is estab-
lished for using services or down-
loading applications from the Inter-
net, charges for the connection
accrue according to the price list of
your network provider or service
provider.
Enter DTMF signals
(digits).
J
If necessary enter further
0
pauses of three seconds
each to ensure correct
processing at destination.
Enter a name.
J
§Save§
Press.
You can also store just the DTMF
tones (digits) without a phone num-
ber and send these during a call.
116
Notes A-Z
Dial-up access GPRS
(General Packet Radio Service)
Extending numbers in the
Phonebook/Addressbook
L
When entering a phone number in
the Phonebook/Addressbook,
digits can be replaced by a
question mark "?":
GPRS is a new method for transmit-
ting data faster in the cell phone net-
work. If you use GPRS and the net-
work has sufficient capacity, you can
be connected to the Internet perma-
nently.
*
Hold down.
Some service providers do not yet
support this service.
This placeholder must be filled
before dialing (e.g. with the exten-
sion number in a telephone system).
EMS
Select the phone number to call
from the Phonebook/Addressbook:
(Enhanced Messaging Service)
Besides formatted texts, you can also
send
A
Press.
• pictures (bitmaps) up to max.
32 x 32 pixels (black and white),
? to be replaced by digits.
Press, number is dialed.
J
A
• sounds,
• animations (sequence of 4 pictures)
8 x 8 and 16 x 16 pixels (black and white),
using the EMS.
The elements listed above can be
transmitted individually or together
in an SMS.
With EMS, pictures and sounds can
also be sent (e.g. as screensavers
and ring tones).
This can result in messages exceed-
ing the length of a single SMS. In this
case individual text messages are
concatenated to form a single
message.
117
Notes A-Z
Highlighting mode
HTTP
With some applications (e.g.
(Hypertext Transfer Protocol)
Addressbook) one or more entries in
a list can be highlighted, to carry out
a function jointly.
HTTP is the name given to the proto-
col that governs data transmission in
the Internet. Using HTTP connec-
tions you can download applications
and games (Games & More, p. 71) as
well as polyphonic ring tones from
the Internet. Configure an HTTP link
using the HTTP profile (p. 73).
§Options§
.
Open menu
Mark
Activate highlighting
mode.
NAddressbook Ú
o
o
p
Anne
Barbara
Carol
International dialing codes
Many international dialing codes are
stored in your phone. In standby
mode (0not necessary when dial-
ing from the Phonebook):
Mark
Options
Hold down until a "+" is dis-
If an unmarked entry is selected, this 0
played. This replaces the
first two digits of the
international dialing
code.
can be highlighted:
§Mark§
The current entry is high-
lighted.
If a highlighted entry is selected, the
§+List§
Press.
highlighting can be deleted:
Select the required country. The
international dialing code is dis-
played. Now add the national num-
ber (in many countries without the
first digit) and press the Call key.
§Unmark§ Unmark the current entry.
Highlighting function in options
menu:
§Options§ Open menu.
Mark All
Highlight all entries.
Unmark All
Delete highlighting on all
marked entries.
118
Notes A-Z
JAD ¦and JAR §
Java™
Three file types occur when using
Java™:
Java™ allows you to use numerous
games and applications on your cell
phone. You can download these
applications from the Internet and
install them on your cell phone. The
application can be started after
installation. Please refer to the
operating instructions for each
application.
The JAD file (Java Descriptor)
This file contains information on the
application (JAR file) and its address
for downloading. By activating a JAD
file, the connection to the Internet is
established and the executable
application is loaded.
Siemens does not guarantee in the
case of Java applications, however,
that the downloaded and installed
Java application will also work well
with your cell phone (p. 73).
The JAR file (Java archive)
This file contains the executable
application. By activating a JAR file,
the application is started.
Combined files
TMessage memory full
These files result from JAR files being
loaded via JAD files. In this case the
JAD file is inserted into the JAR file.
The display icon is the same as for
JAR files.
The SIM memory is full when the
message icon flashes. No more SMS
messages can be received. Delete or
save messages (p. 51).
Outside your own home network
The following icons appear when using
Java™:
work, your phone will automatically
connect to a different GSM network
(p. 88).
JAD file
¦
§
JAR file
Own numbers
You can enter your "own numbers"
in the Phonebook (e.g. fax) for infor-
mation. These numbers can be
changed or deleted and also sent as
an SMS.
119
Notes A-Z
Performance
Phone number memo
A full battery will deliver between
60 to 175 hours of standby time or
100 to 180 minutes of talktime.
You can type in a phone number on
the keypad during a phone call.
The person you are talking to will
hear this. The number can be stored
or dialed after the current call has
ended.
The length of performance depends
on the operating conditions:
Operation
carried out
Time Decrease in the
(min) standby time by
Quick menu selection
All menu functions are numbered
internally. By entering these num-
bers one after the other, the func-
tion may be started at once.
Calling
1
1
30 - 60 minutes
30 minutes
Display back
light *
e.g. write a new text message:
Network
search
1
5 -10 minutes
§Menu§
Press.
* key input, games, organizer etc.
5
for Messages
for New SMS
Extreme temperatures reduce the
standby time of the phone consider-
ably. Avoid exposing the phone to
direct sunlight or placing it on a
radiator.
1
Service numbers
There may be numbers saved in the
Phonebook (<Special Books>, <Service
Numb.>, p. 36) that were put there by
your service provider. You can call
local or nationwide information ser-
vices or use services of the service
provider.
Phone number/URL in SMS
Phone numbers §highlighted§ in the
text can be dialed or stored in the
Phonebook/Addressbook. URLs
directly and the HTTP download
started. To do this the HTTP profile
(p. 73), or the WAP profile (p. 70)
must be installed and activated.
Set Forward
§Forward§
for example, if the Busy diversion is
set and the function Call Waiting is
activated (see also p. 79).
Press to dial the phone
number/download.
A
120
Notes A-Z
SIM card problems
Software version
You have inserted your SIM card.
Despite this, the following message
appears:
To display the software version of
your phone in standby mode enter:
# 0 6 #, then press §Info§.
*
Please insert your SIM card
Switch ring tones on/off
Please check that the card is correctly
inserted and the contacts are clean;
if necessary, clean them with a dry
contact your service provider.
*
Hold down.
In standby mode
All sounds (including the ring tone)
can be switched off and then on
again. The function will end when
the cell phone is switched off.
See also "Questions & Answers"
p. 124.
SMS Push
During a call:
This function allows you to call up an
Internet address (URL) straight from
a text message. After selecting it, the
URL is highlighted. By pressing the
Call key, the WAP browser is auto-
matically started and the highlighted
Internet address is called up.
Switch off the ring tone only for the
current call/alarm (not if Any to Ans-
wer, p. 78, is active). Accepting or
refusing the call ends this function.
• The call will still be displayed.
• The silent alert remains active if it has
been switched on previously.
SMS status report
• The sound settings will remain
unchanged.
If the phone was unable to send the
message to the service center, a
retry option is available. If this
attempt also fails, contact your ser-
vice provider.
Two phone numbers
L
Special settings can be given to each
phone number (e.g. ring tone, call
forward, etc.). Switch to the
required number first.
The confirmation Message sent! only
indicates transmission to the service
center, which then tries to deliver
the message within a certain time-
frame.
To switch the phone number/line in
standby mode:
0
Press.
Press.
See also "validity period", p. 63.
§Line 1§
121
Notes A-Z
Directly enter Internet address (URL)
WAP
A WAP page must be shown in the
display (online or offline):
(Wireless Application Protocol)
WAP is a technical standard that pro-
vides the basis for connecting
mobile radio networks with the
Internet. WAP allows you to surf the
Internet using a cell phone, down-
load games and applications and to
use WAP services such as news, stock
market data and information ser-
vices.
Open the browser menu.
A
J
Go to URL Select.
Enter URL and confirm.
The connection is
established.
Changing the home page
The address of the homepage is
entered in WAP profiles (p. 70).
Special characters for WAP usage
0
Press repeatedly for:
. ,? ! ’ " 0 - ( ) @ / : _
A WAP page must be shown in the
display (online or offline):
WAP usage
Open the browser menu.
A
Start with...
You can set which functions are to
be displayed after Internet access:
More ...
Profiles
Press.
Select.
Select the profile, for example:
Open the browser menu.
A
e-Commerce
Select.
More ...
Setup
Select.
Select.
§Edit§
The entry card is
displayed.
Start with... Select, then select from
WAP param., then select Home.
the list:
Enter new address. Go to
end of entry card.
Start menu
Browser menu
Home
J
§Save§
Press.
Resume
Bookmarks
122
Notes A-Z
Bookmarks (URLs)
Without SIM card
If you switch on the phone without a
SIM card, you can use some of the
phone functions.
L
The list of bookmarks can con-
tain a maximum of 10 entries or
files. Each file can contain further
bookmarks or files.
§Menu§
Press soft key. The func-
tions are displayed.
Save:
§SOS§
Emergency, SOS.
A
Open the browser menu.
Bookmarks
Select.
Online (save):
Add bookmark The current WAP
address is accepted as a
bookmark.
Offline (save):
(Empty)
§Menu§
G
Select.
Open menu.
New Entry Select, enter
name/header and URL
and confirm.
§Save§
Press.
To use:
A
Open the browser menu.
Bookmarks
Select.
G
Select bookmark/file.
§Go§
The bookmark selected is
dialed.
123
GPRS Modem Assistant
The GPRS Modem Assistant enables
GPRS links to be created from a lap-
top, which gives you Internet access
with a laptop and cell phone while
on the road.
Siemens Data Suite
The phone is supported by
Xtnd Connect Synchronization SW
and a modem assistant SW to use
your phone as a GPRS modem. This
software can also be found on the
Siemens Web site.
te
Synctool
®
(XTNDConnect PC)
With this module you can synchro-
nize the Organizer databases on
your phone with your PC. The soft-
ware synchronizes your phone auto-
®
matically with Outlook or Lotus
Notes™.
A detailed list of the PIM versions
supported can be found in the online
help for the Siemens Data Suite.
124
Questions & Answers
ns &
www.my-siemens.com/customercare anytime. As further help we have listed below some
frequently asked questions and answers.
Problem
Possible causes
Possible solution
Phone cannot On/Off key not pressed long
be switched on. enough.
Press On/Off key for at least two seconds.
Flat battery.
Charge battery. Check charging indicator in display.
Clean contacts.
Battery contacts dirty.
See also below under "Charging
error"
Standby time Frequent use of organizer and
Restrict use if necessary.
too short.
games.
Speed search activated.
Display illumination on.
Deactivate speed search.(p. 88).
Switch off display illumination (p. 75).
Activate key lock (p. 78).
Unintentional keystrokes
(illumination!).
Charging error Battery totally discharged.
(charge icon
not displayed).
1) Plug in charger cable, battery is on charge.
2) Charge icon appears after approx. 2 hours.
3) Charge battery.
Temp. out of range
41 F to 104 F.
Make sure the ambient temperature is right, wait for a
while, then recharge.
Contact problem.
Check power supply and connection to the phone.
Check battery contacts and device interface, clean
them if necessary, then insert battery again.
No mains voltage.
Use different mains power socket, check mains
voltage.
Wrong charger.
Battery faulty.
Use original Siemens accessories only.
Replace battery.
SIM error
SIM card not inserted correctly.
Dirty SIM card contacts.
Check that the SIM card is inserted correctly (p. 17).
Clean SIM card with a dry cloth.
Use 3V SIM cards only.
SIM card with wrong voltage.
SIM card damaged (e.g. broken). Carry out a visual check. Change SIM card at service
provider.
125
Questions & Answers
Problem
Possible causes
Weak signal.
Possible solution
No network
connection.
Move higher, to a window or an open space.
Complain to the service provider.
Outside GSM range.
Invalid SIM card.
New network not authorized. Try manual selection or select a different network
(p. 88).
Network barred.
Try again later.
Network overloaded.
Signal too weak.
Phone loses
network.
(p. 88). Switching phone off and on again can speed
this up.
‘
Calls not possible. Second line set.
New SIM card inserted.
Set first line
(p. 87).
Check for new barrings.
Load credit.
Charge limit reached.
Credit used up.
Certain uses of
phone not possible.
rings (p. 86).
No entries in
Addressbook possi-
ble.
Phonebook is full.
Delete entries in Phonebook or transfer to Address-
book (p. 36).
Voice mail not func- Call forward to mailbox not Set call forward to mailbox (p. 79).
tioning
set.
SMS (text mes-
SMS memory is full.
To free up capacity, delete (p. 51) or file (p. 51) text
messages (SMS).
sage) Tflashing.
Function cannot be Not supported by service
Contact your service provider.
set.
provider or registration
required.
Capacity problems Handset memory full.
with, for example,
Delete files in the relevant areas.
Games & More, ring
tones, pictures,
SMS archive.
No WAP access,
downloading not
possible.
Profile not activated, profile Activate (p. 70), set (p. 70) WAP profile or HTTP pro-
settings wrong/incomplete. file (p. 73). If necessary ask your service provider.
126
Questions & Answers
Problem
Possible causes
Possible solution
Text message cannot Service provider does not support
Contact your service provider.
be sent.
this service.
Phone number for service center not Set service center (p. 63).
set or incorrect.
SIM card contract does not support Contact your service provider.
this service.
Service center overstrained.
Repeat message.
Recipient does not have a compati- Check.
ble phone.
EMS pictures and
Destination phone does not support
sounds not displayed the EMS standard.
at destination phone.
No Internet access
possible.
Incorrect WAP profile set, or wrong Check settings or ask contact service
or incomplete settings.
provider.
PIN error/
PIN2 error.
Three wrong entries.
Enter the PUK (MASTER PIN) supplied
with the SIM card according to the instruc-
tions. If the PUK (MASTER PIN) has been
lost, please contact your service provider.
Phone code error.
Three wrong entries.
Contact Siemens Service (p. 127).
Contact your service provider.
Service provider-
code error.
No authorization for this service.
Too few/too many
menu entries.
deleted by the service provider via
the SIM card.
No fax possible.
Wrong settings in the PC.
Check settings (p. 85).
No authorization for this service.
Charge pulse is not transmitted.
Contact your service provider.
Contact your service provider.
Charge meter does
not work.
Damage
Severe shock.
Remove battery and SIM and re-insert them. Do not dismantle the phone!
Dry connector contacts thoroughly. Stand cell phone upright in an air current. Do
not dismantle the phone!
Reset all settings to factory default (see also p. 81): # 9 9 9 9 # A
*
127
Customer Care
er
Simple, straightforward support for technical and operational queries is available from our
chapter "Questions & Answers" (p. 124).
Abu Dhabi.........................................0 26 42 38 00
Argentina .....................................0 80 08 88 98 78
Australia..........................................13 00 66 53 66
Austria.............................................05 17 07 50 04
Bahrain .....................................................40 42 34
Bangladesh.......................................0 17 52 74 47
Belgium.............................................0 78 15 22 21
Bosnia Herzegovina..........................0 33 27 66 49
Brazil............................................0 80 07 07 12 48
Brunei ..................................................02 43 08 01
Bulgaria................................................02 73 94 88
Cambodia ............................................12 80 05 00
Canada ........................................1 88 87 77 02 11
China ...........................................0 21 50 31 81 49
Croatia ..............................................0 16 10 53 81
Czech Republic...............................02 33 03 27 27
Denmark ..............................................35 25 86 00
Dubai ................................................0 43 96 64 33
Egypt.................................................0 23 33 41 11
Estonia.................................................06 30 47 97
Finland............................................09 22 94 37 00
France.............................................01 56 38 42 00
Germany......................................0 18 05 33 32 26
Greece.........................................0 80 11 11 11 16
Hong Kong...........................................28 61 11 18
Hungary ..........................................06 14 71 24 44
Iceland ...................................................5 11 30 00
India.........................................01 13 73 85 89 - 98
Indonesia .....................................0 21 46 82 60 81
Ireland.............................................18 50 77 72 77
Italy.................................................02 66 76 44 00
Ivory Coast...........................................21 35 02 35
Jordan...............................................0 64 39 86 42
Kenya.....................................................2 72 37 17
Kuwait....................................................2 45 41 78
Latvia .....................................................7 50 11 14
Lebanon...............................................01 44 30 43
Libya ...............................................02 13 50 28 82
Lithuania ...........................................8 52 74 20 10
Luxembourg........................................ 43 84 33 99
Macedonia ...........................................02 13 14 84
Malaysia..........................................03 21 63 11 18
Malta.....................................00 35 32 14 94 06 32
Mauritius ................................................2 11 62 13
Mexico .......................................01 80 07 11 00 03
Morocco...............................................22 66 92 09
Netherlands .................................0 90 03 33 31 00
New Zealand...................................08 00 27 43 63
Nigeria ..............................................0 14 50 05 00
Norway.................................................22 70 84 00
Oman....................................................... 79 10 12
Pakistan..........................................02 15 66 22 00
Philippines ........................................0 27 57 11 18
Poland.............................................08 01 30 00 30
Portugal ............................................8 08 20 15 21
Qatar....................................................04 32 20 10
Romania .........................................02 12 04 60 00
Russia..........................................8 80 02 00 10 10
Saudi Arabia .....................................0 22 26 00 43
Serbia .............................................01 13 22 84 85
Singapore ............................................62 27 11 18
Slovak Republic ..............................02 59 68 22 66
Slovenia............................................0 14 74 63 36
South Africa ....................................08 60 10 11 57
Spain.................................................9 02 11 50 61
Sweden.............................................0 87 50 99 11
Switzerland .....................................08 48 21 20 00
Taiwan ............................................02 23 96 10 06
Thailand............................................0 22 68 11 18
Tunisia .................................................71 86 19 02
Turkey..........................................0 21 65 79 71 00
Ukraine ........................................8 80 05 01 00 00
United Arab Emirates........................0 43 31 95 78
United Kingdom ...........................0 87 05 33 44 11
USA .............................................1 88 87 77 02 11
Vietnam................................................45 63 22 44
Zimbabwe ............................................04 36 94 24
Note: When calling customer service,
please have ready your receipt and the
phone identity number (IMEI, to display
press #06#), software version (to display
*
press #06#, then §Info§ and if available,
*
your Siemens Service customer number
* 0.12 euros/minute
128
Specifications
a-
frequency signal, see the statement
by the FDA at the end of this user
guide.
Exposure to radiofre-
quency signals
Your wireless handheld portable
telephone is a low power radio trans-
mitter and receiver. When it is ON, it
receives and also sends out radiofre-
quency (RF) signals.
Technical data
GSM class
Frequency range: 824 - 894 MHz
GSM class: 1 (1 Watt)
Frequency range: 1,850… 1,990 MHz
4 (2 Watt)
In August 1996, The Federal Com-
munications Commission (FCC)
adopted RF exposure guidelines with
safety levels for hand-held wireless
phones. Those guidelines are consis-
tent with the safety standards previ-
ously set by both U.S. and interna-
tional standards bodies:
Weight:
Size
79 g/2.79 oz.
81.6x44.5x21.9 mm
(63 ccm)
Li-Ion Polymer
Battery:
500 mAh
• American National Standards Institute
(ANSI) C95.1 (1992)
Operating temper- 14 ° F to 131 °F
ature:
• National Council of Radiation Protection
and Measurement (NCRP) Report 86
(1986)
SIM card:
3.0 V
• International Commission of Non-Ionizing
Radiation Protection (ICNIRP) 1996
Trademarks
• Ministry of Health (Canada) Safety Code 6
Those standards were based on com-
prehensive and periodic evaluations
of the relevant scientific literature.
For example, over 120 scientists,
engineers, and physicians from uni-
versities, government health agen-
cies, and industry reviewed the avail-
able body of research to develop the
ANSI standard (C95.1).
CPS is a trademark of Cambridge
Positioning Systems Limited.
The design of your phone complies
with the FCC guidelines (and those
standards). For additional informa-
tion concerning exposure to radio
129
Care and maintenance
d
ance
Your phone has been designed and
The suggestions given above apply
crafted with great care and attention
and should also be treated with care.
The suggestions below will help you
to enjoy your phone for many years.
equally to your phone, battery,
charger and all accessories. If any of
these parts are not working properly,
take them to your nearest qualified
service outlet. The personnel there
will assist you and, if necessary,
repair the device.
• Protect your phone from moisture and
humidity! Precipitation, humidity and liq-
uids contain minerals that will corrode
electronic circuits. Nevertheless, should
your phone become wet, disconnect it
immediately from the power supply and
remove the battery!
Phone ID
You will need the following details if you
lose your phone or SIM card. Please enter
here
the number of the SIM card (on the card):
..............................................................
the 15-digit serial number of the phone
(under the battery):
..............................................................
• Do not use or store the phone in dusty,
dirty areas. Its moving parts may become
damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of elec-
tronic devices, damage batteries and warp
or melt certain plastics.
the Customer Service number of the
service provider:
..............................................................
• Do not store your phone in cold areas.
When the phone warms up again (to its
normal ambient temperature), moisture
can form inside the phone, which may
damage electronic circuit boards.
• Do not drop, knock or shake your phone.
Rough handling can damage internal cir-
cuit boards!
Lost phone
If you lose your phone or SIM card contact
your service provider immediately to pre-
vent misuse.
• Do not use abrasive chemicals, cleaning
solvents, or strong detergents to clean the
phone!
130
Accessories
ries
Basics
Li-Ion Polymer Battery 500 mAh EBA-520
Data/Applications
Data Cable DCA-500
Spare battery.
For connecting the phone to the serial
RS232 port of the PC.
Travel Charger
Travel Charger ETC-520
Travel charger with an extended input volt-
age range of 100–240 V.
Data Cable USB DCA-510
For connecting the phone to the USB port of
the PC. With load function.
Headset PTT HHS-510
SyncStation DSC-500
Headset with PTT key to activate voice rec-
ognition and to accept and end calls.
Table cradle for your cell phone. Allows data
exchange and simultaneously charges the
phone via the power supply unit. Features a
desktop charger, a data cable (serial) and a
Y adapter.
Original Siemens Accessories
Innovations
Mobile Camera IQP-511
Camera that plugs into the cell phone.
Allows you to take photos and send them via
the cell phone to other cell phones using
MMS or via email to a PC. Integrated flash-
light that can be switched on or off as
required.
131
Accessories
Car Solutions
Car Charger ECC-500
Charger for the cigarette lighter socket in
the car.
Portable Car Kit HKP-500
Handsfree kit with integrated loudspeaker
and microphone and auto answer feature.
Simply plug into the cigarette lighter socket.
Ideal for easy transfer between vehicles.
Mobile Holder HMH-520
Cradle without antenna port.
Basic Car Pack HKB-500
Allows in-car charging of your cell phone as
well as handsfree talking. Contains a Car
Charger, a Headset PTT and a Y adapter.
Car Kit Plus HKC-511
Handsfree kit with first-class digital call qual-
ity and supreme ease of use. Compatible
with SL56 by using Mobile Holder HMH-520.
Products can be purchased through opera-
tors or by visiting my-siemens.com/us.
Original Siemens Accessories
132
U.S. FDA
A
been done to address these ques-
tions, no clear picture of the biologi-
cal effects of this type of radiation
has emerged to date. Thus, the avail-
able science does not allow us to
conclude that mobile phones are
absolutely safe, or that they are
unsafe. However, the available sci-
entific evidence does not demon-
strate adverse health effects associ-
ated with the use of mobile phones.
The U.S. Food and Drug Admin-
istration's (FDA) Center for
Devices and Radiological Health
Consumer Update on Mobile
Phones
FDA has been receiving inquiries
about the safety of mobile phones,
including cellular phones and PCS
phones. The following summarizes
what is know – and what remains
unknown – about whether these
products can pose a hazard to
health, and what can be done to
minimize any potential risk. This
information may be used to respond
to questions.
What kinds of phones are in question?
Questions have been raised about
hand-held mobile phones, the kind
that have a built-in antenna that is
positioned close to the user's head
during normal telephone conversa-
tion. These types of mobile phones
are of concern because of the short
distance between the phone's
antenna — the primary source of the
RF — and the person's head. The
exposure to RF from mobile phones
in which the antenna is located at
greater distances from the user (on
the outside of a car, for example) is
drastically lower than that from
hand-held phones, because a per-
son's RF exposure decreases rapidly
with distance from the source. The
safety of so-called "cordless phones,"
which have a base unit connected to
the telephone wiring in a house and
which operate at far lower power
levels and frequencies, has not been
questioned.
Why the concern?
Mobile phones emit low levels of
radio frequency energy (i.e., radio
frequency radiation) in the micro-
wave range while being used. They
also emit very low levels of radio fre-
quency energy (RF), considered non-
significant, when in the stand-by
mode. It is well known that high lev-
els of RF can produce biological dam-
age through heating effects (this is
how your microwave oven is able to
cook food). However, it is not known
whether, to what extent, or through
what mechanism, lower levels of RF
might cause adverse health effects
as well. Although some research has
133
U.S. FDA
How much evidence is there that hand-
safety of mobile phones. This
held mobile phones might be harmful?
research has resulted in two findings
in particular that merit additional
study:
Briefly, there is not enough evidence
to know for sure, either way; how-
ever, research efforts are on-going.
The existing scientific evidence is
conflicting and many of the studies
that have been done to date have
suffered from flaws in their research
methods. Animal experiments inves-
tigating the effects of RF exposures
characteristic of mobile phones have
yielded conflicting results. A few ani-
mal studies, however, have sug-
gested that low levels of RF could
accelerate the development of can-
cer in laboratory animals. In one
study, mice genetically altered to be
predisposed to developing one type
of cancer developed more than
twice as many such cancers when
they were exposed to RF energy
compared to controls. There is much
uncertainty among scientists about
whether results obtained from ani-
mal studies apply to the use of
mobile phones. First, it is uncertain
how to apply the results obtained in
rats and mice to humans. Second,
many of the studies showed
increased tumor development used
animals that had already been
treated with cancer-causing chemi-
cals, and other studies exposed the
animals to the RF virtually continu-
ously – up to 22 hours per day.
1. In a hospital-based, case-control
study, researchers looked for an
association between mobile phone
use and either glioma (a type of
brain cancer) or acoustic neuroma (a
benign tumor of the nerve sheath).
No statistically significant associa-
tion was found between mobile
phone use and acoustic neuroma.
There was also no association
between mobile phone use and glio-
mas when all types of gliomas were
considered together. It should be
noted that the average length of
mobile phone exposure in this study
was less than three years.
When 20 types of glioma were con-
sidered separately, however, an
association was found between
mobile phone use and one rare type
of glioma, neuroepithelliomatous
tumors. It is possible with multiple
comparisons of the same sample
that this association occurred by
chance. Moreover, the risk did not
increase with how often the mobile
phone was used, or the length of the
calls. In fact, the risk actually
decreased with cumulative hours of
mobile phone use. Most cancer caus-
ing agents increase risk with
increased exposure. An ongoing
study of brain cancers by the
For the past five years in the United
States, the mobile phone industry
has supported research into the
134
U.S. FDA
National Cancer Institute is expected
to bear on the accuracy and repeat-
ability of these results.1
research recommendations and sci-
entific oversight of new CTIA-funded
research based on such recommen-
dations.
2. Researchers conducted a large
battery of laboratory tests to assess
the effects of exposure to mobile
phone RF on genetic material. These
included tests for several kinds of
abnormalities, including mutations,
chromosomal aberrations, DNA
strand breaks, and structural
changes in the genetic material of
blood cells called lymphocytes. None
of the tests showed any effect of the
RF except for the micronucleus
assay, which detects structural
effects on the genetic material. The
cells in this assay showed changes
after exposure to simulated cell
phone radiation, but only after 24
hours of exposure. It is possible that
exposing the test cells to radiation
for this long resulted in heating.
Since this assay is known to be sensi-
tive to heating, heat alone could
have caused the abnormalities to
occur. The data already in the litera-
ture on the response of the micronu-
cleus assay to RF are conflicting.
Thus follow-up research is neces-
sary. 2
Two other studies of interest have
been reported recently in the litera-
ture:
• Two groups of 18 people were exposed to
simulated mobile phone signals under lab-
oratory conditions while they performed
cognitive function tests. There were no
changes in the subjects' ability to recall
words, numbers, or pictures, or in their
spatial memory, but they were able to
make choices more quickly in one visual
test when they were exposed to simulated
mobile phone signals. This was the only
change noted among more than 20 vari-
ables compared.3
• In a study of 209 brain tumor cases and
425 matched controls, there was no
increased risk of brain tumors associated
with mobile phone use. When tumors did
exist in certain locations, however, they
were more likely to be on the side of the
head where the mobile phone was used.
Because this occurred in only a small num-
ber of cases, the increased likelihood was
too small to be statistically significant.4
In summary, we do not have enough
information at this point to assure
the public that there are, or are not,
any low incident health problems
associated with use of mobile
phones. FDA continues to work with
all parties, including other federal
agencies and industry, to assure that
research is undertaken to provide
FDA is currently working with gov-
ernment, industry, and academic
groups to ensure the proper follow-
up to these industry-funded research
findings. Collaboration with the Cel-
lular Telecommunications Internet
Association (CTIA) in particular is
expected to lead to FDA providing
135
U.S. FDA
the necessary answers to the out-
standing questions about the safety
of mobile phones.
cers by the National Cancer Institute,
as well as the follow-up research to
be sponsored by industry, will begin
to generate this type of information.
What is known about cases of human
cancer that have been reported in users
of hand-held mobile phones?
What is FDA's role concerning the safety
of mobile phones?
Some people who have used mobile
phones have been diagnosed with
brain cancer. But it is important to
understand that this type of cancer
also occurs among people who have
not used mobile phones. In fact,
brain cancer occurs in the U.S. popu-
lation at a rate of about 6 new cases
per 100,000 people each year. At
that rate, assuming 80 million users
of mobile phones (a number increas-
ing at a rate of about 1 million per
month), about 4800 cases of brain
cancer would be expected each year
among those 80 million people,
whether or not they used their
Under the law, FDA does not review
the safety of radiation emitting con-
sumer products such as mobile
phones before marketing, as it does
with new drugs or medical devices.
However, the agency has authority
to take action if mobile phones are
shown to emit radiation at a level
that is hazardous to the user. In such
a case, FDA could require the manu-
facturers of mobile phones to notify
users of the health hazard and to
repair, replace or recall the phones
so that the hazard no longer exists.
Although the existing scientific data
do not justify FDA regulatory actions
at this time, FDA has urged the
mobile phone industry to take a
number of steps to assure public
safety. The agency has recom-
mended that the industry:
phones. Thus it is not possible to tell
whether any individual's cancer
arose because of the phone, or
whether it would have happened
anyway. A key question is whether
the risk of getting a particular form
of cancer is greater among people
who use mobile phones than among
the rest of the population. One way
to answer that question is to com-
pare the usage of mobile phones
among people with brain cancer
with the use of mobile phones
among appropriately matched peo-
ple without brain cancer. This is
called a case-control study. The cur-
rent case-control study of brain can-
• Support needed research into possible
biological effects of RF of the type emitted
by mobile phones;
• Design mobile phones in a way that mini-
mizes any RF exposure to the user that is
not necessary for device function; and
136
U.S. FDA
• Cooperate in providing mobile phone
users with the best possible information on
what is known about possible effects of
mobile phone use on human health.
on conventional phones and reserv-
ing the hand-held models for shorter
conversations or for situations when
other types of phones are not avail-
able.
At the same time, FDA belongs to an
interagency working group of the
federal agencies that have responsi-
bility for different aspects of mobile
phone safety to ensure a coordi-
nated effort at the federal level.
These agencies are:
People who must conduct extended
conversations in their cars every day
could switch to a type of mobile
phone that places more distance
between their bodies and the source
of the RF, since the exposure level
drops off dramatically with distance.
For example, they could switch to:
• National Institute for Occupational Safety
and Health
• a mobile phone in which the antenna is
located outside the vehicle,
• Environmental Protection Agency
• Federal Communications Commission
• a hand-held phone with a built-in antenna
connected to a different antenna mounted
on the outside of the car or built into a sep-
arate package, or
• Occupational Health and Safety Adminis-
tration
• National Telecommunications and Infor-
mation Administration
• a headset with a remote antenna to a
mobile phone carried at the waist.
The National Institutes of Health also
participates in this group.
Where can I find additional information?
For additional information, see the
following websites:
In the absence of conclusive information
about any possible risk, what can con-
cerned individuals do?
• Federal Communications Commission
(FCC) RF Safety Program (select "Infor-
mation on Human Exposure to RF Fields
from Cellular and PCS Radio Transmit-
ters"):
If there is a risk from these products
— and at this point we do not know
that there is — it is probably very
small. But if people are concerned
about avoiding even potential risks,
there are simple steps they can take
to do so. For example, time is a key
factor in how much exposure a per-
son receives. Those persons who
spend long periods of time on their
hand-held mobile phones could con-
sider holding lengthy conversations
http://www.fcc.gov/oet/rfsafety.
• World Health Organization (WHO) Interna-
tional Commission on Non-Ionizing Radia-
tion Protection (select Qs & As):
http://www.who.int/emf
137
U.S. FDA
• United Kingdom, National Radiological
Protection Board:
http://www.nrpb.org.uk
• Cellular Telecommunications Internet
Association (CTIA):
http://www.wow-com.com
• U.S. Food and Drug Administration (FDA)
Center for devices and Radiological
Health:
http://www.fda.gov/cdhr/
consumer/
1 Muscat et al. Epidemiological Study of Cel-
lular Telephone Use and Malignant Brain
Tumors. In: State of the Science Sympo-
sium; 1999 June 20; Long Beach, California.
2 Tice et al. Tests of mobile phone signals for
activity in genotoxicity and other laboratory
assays. In: Annual Meeting of the Environ-
mental Mutagen Society; March 29, 1999,
Washington, DC; and personal communica-
tion, unpublished results.
3 Preece, AW, Iwi, G, Davies-Smith, A,
Wesnes, K, Butler, S, Lim, E, and Varey, A.
Effect of a 915- MHz simulated mobile
phone signal on cognitive function in man.
Int. J. Radiat. Biol., April 8, 1999.
4 Hardell, L, Nasman, A, Pahlson, A,
Hallquist, A and Mild, KH. Use of cellular
telephones and the risk for brain tumors; a
case-control study. Int. J. Oncol, 15:
113-116, 1999.
138
FCC/Industry Canada Notice
us- Your phone may cause TV or radio
interference (for example, when
using a telephone in close proximity
to receiving equipment). The FCC or
Industry Canada can require you to
stop using your telephone if such
interference cannot be eliminated. If
you require assistance, please con-
tact your local service facility.
da
139
Ten Driving Safety Tips
ing
ps
When available, use a hands-free device.
A number of hands-free wireless
phone accessories are readily avail-
able today. Whether you choose an
installed mounted device for your
phone or a speaker phone accessory,
take advantage of these devices if
they are available to you.
Your Siemens wireless phone gives
you the power to communicate by
voice – almost anywhere, anytime.
But an important responsibility
accompanies the benefits of wireless
phones, one that every user must
uphold.
Position your phone within easy reach.
Make sure you place your wireless
phone within easy reach and where
you can grab it without removing
your eyes from the road. If you get
an incoming call at an inconvenient
time, let your voicemail answer it for
you.
When driving a car, driving is your
first responsibility. When using your
wireless phone behind the wheel of
a car, practice good common sense
and remember the following tips:
Suspend conversations during hazard-
ous driving conditions or situations.
Let the person you are speaking to
know you are driving; if necessary,
suspend the call in heavy traffic or
hazardous weather conditions. Rain,
sleet, snow and ice can be hazard-
ous, but so is heavy traffic. As a
driver, your first responsibility is to
pay attention to the road.
Get to know your phone and its features
such as speed dial and redial.
Carefully read your instruction man-
ual and learn to take advantage of
valuable features most phones offer
including, automatic redial and
memory dial – most phones can
store up to 99 numbers in memory
dial. Also, work to memorize the
phone keypad so you can use the
speed dial function without taking
your attention off the road.
Do not take notes or look up phone num-
bers while driving.
If you are reading an address book or
business card while driving a car, or
writing a "to do" list, then you are not
watching where you are going. It’s
common sense. Don’t get caught in a
dangerous situation because you are
reading or writing and not paying
attention to the road or nearby vehi-
cles.
140
Ten Driving Safety Tips
Dial sensibly and assess the traffic.
Use your phone to help others in emer-
gencies.
If possible, place calls when you are
not moving or before pulling into
traffic. Try to plan your calls before
you begin your trip, or attempt to
coincide your calls with times you
may be stopped at a stop sign, red
light or otherwise stationary. But if
you need to dial while driving, follow
this simple tip – dial only a few num-
bers, check the road and your mir-
rors, then continue.
Your wireless phone provides you a
perfect opportunity to be a "good
Samaritan" in your community. If
you see an auto accident, crime in
progress or other serious emergen-
cies where lives are in danger, call 9-
1-1, as you would want others to do
for you.
Call roadside assistance or a special
wireless non-emergency assistance
number when necessary.
Do not engage in stressful or emotional
conversations that may be distracting.
Certain situations you encounter
while driving may require attention,
but are not urgent enough to merit a
call to 9-1-1. But you can still use
your wireless phone to lend a hand.
If you see a broken-down vehicle
posing no serious hazard, a broken
traffic signal, a minor traffic accident
where no one appears injured, or a
vehicle you know to be stolen, call
roadside assistance or other special
non-emergency wireless numbers.
Stressful or emotional conversations
and driving do not mix – they are dis-
tracting and even dangerous when
you are behind the wheel. Make peo-
ple you are talking with aware you
are driving and if necessary, suspend
phone conversations that have the
potential to forward your attention
from the road.
Use your phone to call for help.
Your wireless phone is one of the
greatest tools you can own to pro-
tect yourself and your family in dan-
gerous situations – with your phone
at your side, help is only three num-
bers away. Dial 9-1-1 in the case of
fire, traffic accident, road hazard, or
medical emergency. Remember, it is
a free call on your wireless phone.
“The wireless industry reminds you to
use your phone safely when driving.”
For more information, please call
1 (888) 901-SAFE, or visit our Web site
at: www.wow-com.com
Provided by the Cellular Telecommunica-
tions Internet Association (CTIA)
141
Intellectual Property
ual
parts furnished hereunder with soft-
ware, apparatus or devices not fur-
nished by Siemens, nor will Siemens
have any liability for the use of ancil-
lary equipment or software not fur-
nished by Siemens which is attached
to or used in connection with the
Product, The foregoing states the
entire liability of Siemens with
Intellectual Property Restrictions
All Intellectual Property, as defined
below, which is owned by or other-
wise the property of Siemens Infor-
mation and Communications
Mobile, LLC ("Siemens"), its affili-
ates, partners or suppliers, relating
to the Phone, including but not lim-
ited to accessories, parts or software
relating thereto (the “Phone Sys-
tem”), is proprietary under federal
laws, state laws and International
treaty provisions. Intellectual Prop-
erty includes, but is not limited to,
inventions (patentable or unpatent-
able), patents, trade secrets, copy-
rights, software, computer pro-
grams, and related documentation
and other works of authorship. You
may not infringe or otherwise violate
the rights secured by the Intellectual
Property. Moreover, you agree that
you will not (and will not attempt to)
disassemble, decompile, reverse
engineer, prepare derivative works
from, modify or make any other
effort to create source code from the
software. No title to ownership in
the Intellectual Property is trans-
ferred to you through purchase or
possession of the Phone or its com-
ponents. All applicable rights of the
Intellectual Property shall remain
with Siemens, its affiliates, partners
or suppliers.
respect to infringement of patents
by the Product or any parts thereof.
Laws in the United States and other
countries preserve for Siemens cer-
tain exclusive rights for copyrighted
Siemens software, such as the exclu-
sive rights to reproduce and distrib-
ute copies of such Siemens software.
Siemens software may be used only
in the Product in which the software
was originally embodied when pur-
chased, and such software in such
Product may not be replaced, cop-
ied, distributed. modified in any
way, or used to produce any deriva-
tive thereof. No other use including,
without limitation, alteration, modi-
fication, reproduction, distribution.
or reverse engineering of such Sie-
mens software or exercise of rights
in such Siemens software is permit-
ted. No license is granted by implica-
tion, estoppel or otherwise under
Siemens patent rights or copyrights.
Siemens will have no liability with
respect to any claim of patent
infringement which is based upon
the combination of the Product or
142
A
Bookmarks (WAP)........................68
Addressbook
All calls (call time/charge) ........... 46
All calls (diversion)...................... 79
Archive (SMS)............................. 51
Calculator .................................103
Calls received (call list) ................44
Car kit
Charging battery .........................18
Clock ..........................................82
Color schemes.............................74
clock....................................... 82
B
Battery
insert...................................... 17
performance......................... 119
Big letters (message on display)... 75
CSD .................................. 115, 116
Fast network search ....................88
Flash.........................................106
D
Dial-up access (connection) ........ 84
Display
Games & More ............................71
GPRS
Greeting .....................................75
Driving safety ........................... 139
DTMF tones (control codes) ...... 115
Headset
E
E-mail
Enter text without T9.................. 31
Entry no. (phonebook)................ 36
Extras....................................... 103
Icons...........................................15
Identity number (IMEI) ................81
Illumination (display) ..................75
144
Inbox
MMS
My menu ....................................93
Input language (T9).................... 32
International dialing code ......... 117
J
Notes..........................................99
K
Key lock...................................... 78
L
Limit Durat/charges .................... 46
M
Menu
Phone identity number (IMEI)......81
Phone number extension ..........116
my menu ................................ 93
Messages on the display ............. 15
Microphone on/off...................... 30
Minute beep............................... 77
location...................................38
new entry................................36
Pictures & sounds (SMS)..............48
PIN
Siemens hotline ........................127
SIM card
POP3 .......................................... 65
profile
Prompt ....................................... 27
PUK, PUK2 .................................. 23
Q
R
Reminder.................................... 27
Speed dialing keys.....................111
Standard values ..........................81
Standby mode.............................20
S
Set date/time.............................. 82
Set ringer ................................... 76
Set time/date.............................. 82
146
Stopwatch................................ 104
Switch off phone
parameters..............................70
Warning tones ............................77
manually ................................ 19
Switch on ................................... 19
XTNDConnect® PC.....................123
T
T9
Text entry with T9....................... 32
U
Unanswered calls........................ 79
Upper case, lower case letters..... 31
V
Voice command........................ 107
Volume
handset .................................. 26
profile..................................... 91
ringer ..................................... 76
|