s
Be inspired
Insert SIM card/battery ............. 9
Switching on your phone
User guide ............................. 13
<New entry> .......................... 25
Call (search for an entry) ........ 26
Change entry ......................... 26
messages ...............................49
Lists .......................................53
3
Safety precautions
Note for parents
ons
Read the operating instructions and safety precautions carefully before use.
Explain to your children the contents and the hazards associated with using the phone.
The SIM card may be removed.
Caution! Small parts could be
swallowed by children.
When in a hospital, switch off
your phone. Mobile phones can
interfere with the functioning of
medical devices such as
hearing aids or pacemakers.
Keep at least 20cm/9 inches be-
tween phone and pacemaker.
When using the mobile phone,
hold it to the ear that is farther
away from the pacemaker. For
doctor.
The voltage (V) specified on the
power supply unit must not be
exceeded.
Do not view the activated infra-
red interface [Class 1
LED product (classification
under IEC 60825-1)] with
an optical magnifier.
Always use the handsfree kit
(p. 104) with an external anten-
na for calls while driving! !
Only use original Siemens bat-
teries (100% mercury-free) and
charging devices. Otherwise,
considerable health risks and
damage to the product cannot
be excluded: the battery could
explode, for instance.
Mobile phones must be
switched off at all times in an air-
craft. To prevent accidental acti-
vation, see (p. 72).
Switch off near service stations,
fuel depots, chemical plants or
blasting operations. Mobile
phones can interfere with the
tions.
You may only open the phone
to replace the battery (100%
mercury-free) or SIM card. You
must not open the battery under
any circumstances. Any other
changes to this device are
strictly prohibited, as they will
invalidate the type approval cri-
teria required for operation of
the unit.
The ringtone (p. 89), info tones
(p. 89) and handsfree talking
are reproduced through the
loudspeaker. Do not hold the
phone to the ear when it rings or
when you have switched on the
handsfree function (p. 20).
Otherwise, there is a risk of seri-
ous lasting damage to hearing.
4
Safety precautions
Please note:
Safely dispose of used batteries
and phones according to the le-
gal regulations.
Mobile phones can interfere
with the operation of nearby
TVs, radios or PCs.
Only use original Siemens ac-
cessories to avoid possible
damage to health and property
and to comply with the existing
regulations.
Improper use invalidates the warranty!
5
SAR (Specific Absorption Rate)
THIS SIEMENS S55 PHONE MEETS
tiple power levels so as to use only
THE GOVERNMENT’S REQUIRE-
MENTS FOR EXPOSURE TO RADIO
WAVES.
the power required to reach the net-
work. In general, the closer you are
to a wireless base station antenna,
the lower the power output.
on
Your wireless Siemens S55 phone is
a radio transmitter and receiver. It is
designed and manufactured not to
exceed the emission limits for expo-
sure to radiofrequency (RF) energy
set by the Federal Communications
Commission of the U.S. Govern-
ment. These limits are part of com-
prehensive guidelines and establish
permitted levels of RF energy for the
general population. The guidelines
are based on standards that were de-
veloped by independent scientific
organizations through periodic and
thorough evaluation of scientific
studies. The standards include a sub-
stantial safety margin designed to
assure the safety of all persons, re-
gardless of age and health.
Before a phone model is available for
sale to the public, it must be tested
and certified to the FCC that it does
not exceed the limit established by
the government-adopted require-
ment for safe exposure. The tests are
performed in positions and locations
(for example, at the ear and worn on
the body) as required by the FCC for
each model. The highest SAR value
for this Siemens S55 phone when
tested for use at the ear is 0.52 W/kg,
and when worn on the body, as de-
scribed in this user guide, is
0.36 W/kg. (Body-worn measure-
ments differ among phone models,
depending upon available accesso-
ries and FCC requirements.) While
there may be differences between
the SAR levels of various phones and
at various positions, they all meet
the government requirement for
safe exposure.
The exposure standard for wireless
mobile phones employs a unit of
measurement known as the Specific
Absorption Rate, or SAR. The SAR
limit set by the FCC is 1.6 W/kg.*
Tests for SAR are conducted using
standard operating positions speci-
fied by the FCC with the phone trans-
mitting at its highest certified power
level in all tested frequency bands.
Although the SAR is determined at
the highest certified power level, the
actual SAR level of the phone while
operating can be well below the
maximum value. This is because the
phone is designed to operate at mul-
The FCC has granted an Equipment
Authorization for this Siemens S55
phone with all reported SAR levels
evaluated as in compliance with the
FCC RF emission guidelines. SAR in-
formation on this Siemens S55
phone is on file with the FCC and can
be found under the Display Grant
section of
http://www.fcc.gov/oet/fccid
after searching on FCC ID PWX-S55.
6
SAR (Specific Absorption Rate)
For body worn operation, to main-
tain compliance with FCC RF expo-
sure guidelines, use only Siemens
approved accessories. When carry-
ing the phone while it is on, use the
specific Siemens belt clip that has
been tested for compliance.
Use of non-Siemens-approved acces-
sories may violate FCC RF exposure
guidelines and should be avoided.
* In the United States and Canada, the SAR
limit for mobile phones used by the public is
1.6 watts/kg (W/kg) averaged over one gram
of tissue. The standard incorporates a sub-
stantial margin of safety to give additional
protection for the public and to account for
any variations in measurements.
Additional information on Specific Absorp-
tion Rates (SAR) can be found on the Cellu-
lar Telecommunications Industry
Association (CTIA) web-site at:
http://www.wow-com.com
For SAR information in other regions please
look under product information at:
www.my-siemens.com
7
Overview of phone
w of
c Integrated antenna
Do not interfere with the phone unnecessarily
above the battery cover. This reduces the
signal strength.
d Loudspeaker
_
ª
g
Service provider
e Display indicators
Signal strength/GPRS available/battery level.
f Control key
11/05/02
New SMS
12:30
Menu
See next page
g Input keys
Numbers, letters
h Microphone
i Plus-Minus key
• During a call:volume loud-quiet.
• In menus, lists and WAP pages: scroll up
and down.
• In standby mode:
ÒPress key briefly: displays current profile.
ÓHold key down: start voice control.
j Dictation key
(in standby mode):
Hold down: record.
Press briefly: play back.
k Infrared interface
(IrDA, e.g. for PC/PDA communication with
mobile phone).
l Device interface
Connection for charger, headset, etc.
8
Overview of phone
c Soft keys
The current functions of these keys are dis-
played in the bottom line of the display as
§text§A/icons
d
Call key
Dial phone number/name selected, take calls.
Display last calls in standby mode.
_
ª
g
Service provider
e Control key
In lists and menus:
11/05/02
New SMS
12:30
Menu
G
Scroll up/down.
Select function.
Menu level back.
D
C
During a call:
D
Open call menu.
In standby mode:
E
Voice command.
Open Address/Phonebook.
Open menu.
F
D
Info (e.g. GPRS information).
CB On/Off/End key
f
• Switched off: hold down to switch on.
• During a conversation or in an application:
press briefly to finish.
• In menus:press briefly to go back one level.
• In standby mode: hold down to switch off
phone.
*
g
Hold down
• In standby mode: switch all audible signals
on/off (except alarm).
• For incoming calls: switch off ringtones only.
#
h
Hold down
In standby mode: switch key lock on/off.
9
Getting started
• Insert battery into the phone side-
Insert SIM card/battery
ways p, then press downwards
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
, until it engages.
q
q
p
• Remove the cover upwards, in the
direction of the arrow n.
r
• To remove, push down the
retaining flap r, and then lift
out battery.
n
• Insert cover in the lower edge
,
s
then press downwards , until it
t
engages.
• Insert SIM card in the opening
with contacts pointing downwards
and push gently until it engages
(make sure the angled corner is in
t
s
the correct position ).
o
o
Note
Always switch off phone before removing
the battery!
Only 3V SIM cards are supported. Please
contact your service provider if you have an
older card.
Functions with SIM card.............page 121
10
Getting started
Charge icon not visible
Charge battery
If the battery is totally discharged, no
charge icon is displayed when the
charger is plugged in. It will appear
after two hours at most. In this case
the battery is fully charged after
3-4 hours.
The battery is not fully charged
when delivered. Plug charger cable
into the bottom of the phone, plug
power supply unit into a power sock-
et and charge for at least two hours.
Only use the charger provided!
Display while in service
Charge level display during opera-
tiona(empty-fuldl): g
A beep sounds when the battery is
nearly empty. The battery level is
only shown correctly during an un-
broken charging/discharging cycle.
You should therefore not remove the
battery unnecessarily and where possi-
ble not finish the loading process early.
Display when charging is in progress
h
During charging.
Charging time
An empty battery is fully charged
after about 2 hours. Charging is only
possible in an ambient temperature
of 41 °F to 104 °F (the charge icon
flashes as a warning when the tem-
perature is 41 °F above/below this
range). The voltage specified on the
power supply unit must not be ex-
ceeded.
Note
periods. This is normal and not dangerous.
Performance...............................page 118
Battery quality statement............page 114
To obtain maximum performance
from the battery, it must be fully
charged and then emptied at least
five times.
Note
Your phone's display is delivered with a protective film.
Remove this film before getting started.
In rare cases, the static discharge may cause discoloration at the edges of the display. How-
ever this will disappear within 10 minutes.
11
Switch on, off / PIN entry
n, off Activate/deactivate
Switching on your phone
ry
Hold down On/Off/End key
for the first time
B
to switch on or off.
Contrast, time/date
Enter PIN
Set display contrast.
G
The SIM card can be protected with a
4-8 digit PIN.
Set time/date (page 93).
Enter the PIN using the
J
Phonebook or Addressbook
number keys. Input is
You can choose whether you want
to use the Phonebook on the SIM card
or the internal Addressbook as stan-
dard.
shown as a series of aster-
isks; if you make a mis-
take, press §Clear§.
You can copy the SIM card Phone-
book to the Addressbook on the
phone. Please do not interrupt this pro-
cedure. During this time, do not accept
on the display.
Please enter
your PIN:
* * * *
Clear
OK
To copy data on the SIM card at a lat-
and copy these with the function
Copy into 9 (Phonebook options
menu page 26).
§OK§
Confirm entry with right
soft key. Logging on to
the network will take a
few seconds.
12
Switch on, off / PIN entry
Standby mode
_
g
Service provider
11/05/2002
12:30
My menu
Menu
When the name of the service pro-
vider appears on the display, the
phone is in standby mode and ready
for use.
The left soft key may have different
functions pre-assigned.
Press the On/Off/End key
B
repeatedly to return to
standby mode from any
situation.
Note
_
Signal strength..............page 119
SIM services (optional)........page 80
}
§SOS§..........................................page 115
Change PIN .................................page 15
Other network ............................page 102
SIM card problems.....................page 119
Clear SIM card barring.................page 16
13
General instructions
This corresponds to:
User guide
The following icons are used to ex-
plain operation:
ons
_
g
n
Service provider
Enter numbers or letters.
J
11/05/2002
My menu
12:30
Menu
On/Off/End key.
B
Call key.
A
Press control key on the side
indicated.
D
§Menu§
Open menu.
Soft keys
< >
From standby mode: press
right soft key.
Displays a soft-key function.
§Menu§
Function dependent on ser-
SMS
L
vice provider, may require
o
É
ꢀ Z
special registration.
ꢁ ] ~
Ñ m
[
Menu controls
The steps needed to reach a function
are shown in a condensed form in this
user guide, e.g. to display call list for
missed calls:
My menu
Select
§Menu§KRecordsKCalls missed
E
Records ZSelect.
Press top of control key.
14
General instructions
ZRecords
Z Calls missed
r
p
É
ꢀ Z
Office
ꢁ ] ~
+55523765489
Carol
Ñ m
[
My menu
View
Options
Select
Scroll to the required
entry.
§Select§
Press.
F
Press right soft key to open the
Records submenu.
Press control key at the bot-
tom to scroll down.
Z Records
Calls missed
Calls received
Calls dialed
q
Z Calls missed
+55523765489
Carol
s
Garage
Select
View
Options
§Select§
Press.
§View§
Press.
Press right soft key to open the
Calls missed list.
Press left soft key to show
phone number with date, time
and number of calls.
N View
Carol
t
+55523765489
11/05/2002 12:30
§5§
Call OK
15
Security
§Select§
Press.
Codes
The phone and SIM card are protect- J
Enter PIN.
Confirm input.
ed against misuse by several security
codes.
§OK§
§Change§ Press.
Keep these confidential numbers in a
safe place where you can access them
again if required.
§OK§
Confirm.
Change PIN
You can change the PIN to any 4-8
digit number you find easier to re-
member.
PIN
Protects your SIM card (person-
al identification number).
PIN2
This is needed to set the charge
detail display and to access ad-
ditional functions requiring spe-
cial SIM cards.
J
§OK§
J
Enter current PIN.
Press.
PUK
PUK2
Key code. Used to unlock SIM
cards after the wrong PIN has
been entered repeatedly.
§OK§ Enter new PIN.
§OK§ Repeat new PIN.
,
J
,
Phone
code
Protects your phone.
Must be entered at the first
security setting.
Change PIN2
(display only if PIN 2 is available).
Proceed as with Change PIN.
§Menu§KSetupKSecurity
Kthen select function
PIN control
The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature but you
risk unauthorized use of the phone.
Some service providers do not per-
mit deactivation of the control.
16
Security
Chg.phonecode
Prevent accidental
You define and enter the phone
phone code-protected function for
the first time (e.g. Babysitter
page 22). It is then valid for all
phone code-protected functions.
After three incorrect entries the
phone is locked. If this happens
please contact Siemens Service
(page 127).
Even if PIN entry is deactivated (see
page 15), confirmation is required to
switch on phone.
This prevents the phone from being
switched on accidentally, e.g. when
carried in a pocket or while you are
on an aircraft.
Hold down.
B
Clear SIM-card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN), provided by
your service provider with the SIM
card, according to instructions. If the
PUK (MASTER PIN) has been lost,
please contact your service provider.
Please confirm switch on
OK
Press.
Cancel
Note
The phone switches on.
Screensaver.................................page 86
Key lock ....................................... page 90
Further security settings.............page 100
§Cancel§
Press or take no action.
The switching-on opera-
tion is broken off.
17
My phone
e
Change your phone to match your
Where do I get what?
personal requirements.
You can order additional ring tones,
logos, animations and screensavers
on the Internet and receive them by
SMS/MMS:
Ring tones
Assign individual ring tones to caller
groups or for special dates
(page 89).
Animations, screensavers,
logos, applications
Adjust your phone in the following
ways to give it a personal touch and
Or you can download them direct via
WAP:
wap.my-siemens.com
Animations
Choose a start-up and closing anima-
tion (page 87) as well as a personal
greeting (page 87).
Siemens City Portal
Additional applications, games and
services for your mobile phone (e.g.
a Photo Logo Composer to create
personal pictures for your Address
Book) can be found at:
Screensaver
Choose an analog clock or a personal
picture (page 86).
(Provider) logo
The Siemens City Portal also provides
a list of countries in which these ser-
vices are available.
Choose a personal picture (display in
standby mode).(page 87)
Background image
Choose your own permanent back-
ground image (page 86).
My menu
Create your own menu with fre-
quently used functions, phone num-
bers or WAP pages (page 83).
Applications
Download your own applications
from the Internet.(page 68)
Color scheme
Choose a color scheme for the entire
service system (page 86).
18
Calling
Dialing with number keys Redialing
The phone must be switched on
(standby mode).
To redial the phone number last
called:
Enter number (always
J
Press Call key twice.
A
with area code, if neces-
sary with international
dialing code).
To redial other numbers that were
dialed previously:
§Clear§ A short press clears
the last digit, a long press
clears the entire phone
number.
Press the Call key once.
A
Select required phone
number from list, then
press ...
G
Press the Call key. The dis-
played phone number is
dialed.
A
A
... to dial.
Note
End call
ꢂ Save phone number
Press End key briefly. The
B
(Phonebook.)................................page 25
call is ended. Press this
key even if the person on
the other end of the line
has hung up first.
º Save phone number
(Addressbook)..............................page 28
§Options§ Call lists.......................page 33
; menu§ Call menu....................page 22
§Forward§ Set call forwarding......page 90
§Handsfr.§ Handsfree ..................page 20
Microphone off .............................page 22
Voice dialing.................................page 31
Set volume
Use the left side key to
change volume (only
possible during a call).
ÒÓ
If a car kit is used, its volume setting
will not affect the usual setting on
the phone.
(Hide ID).......................................page 90
International dialing codes..........page 116
Phone number memo.................page 118
Control codes (DTMF)................page 114
19
Calling
When a number is busy
Accept call
If the number called is busy or can-
not be reached because of network
problems, several options are avail-
able (depending on the service pro-
vider). An incoming call or any other
use of the phone interrupts these
functions.
The phone must be switched on
(standby mode). An incoming call
will interrupt any other use of the
phone.
i
Either
+5552764556
Automatic redial of last number
§Auto dial§ Press. The number is auto-
matically redialed for up
Reject
Reply
Press.
§Reply§
to 15 minutes at increas-
ing intervals. End with:
or
A
Press.
B End key.
The phone number is displayed if
transmitted by the network. If the
or
Call back
caller's name appears in the Phone-
book or Addressbook, this will ap-
pear instead of the number. If set, a
picture can be displayed instead of
the bell icon (page 28).
§Call back§ Press. Your phone rings
when the busy number is
free. Press the Call key to
dial the number.
Note
Reminder
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid your hearing possibly being
damaged by a loud ringtone.
§Prompt§ Press. A beep reminds
you to redial the dis-
played phone number
after 15 minutes.
20
Calling
Use the left side key to
regulate volume.
ÒÓ
Reject call
§Reject§
Press. The call will be for-
warded if this has been
set previously (page 90).
§Handsfr.§ Deactivate.
Note
or
Always deactivate "handsfree talking"
before holding the phone to your ear. This
will avoid damage to your hearing.
B
Press briefly.
Note
ꢃ Missed calls.......................... page 33
Accept call using any key............. page 90
Switch off ringer .........................page 119
Hold call
You can call another number during
a call.
Handsfree
; menu§ Open call menu
You can put the phone aside during
a call. You can then hear the caller
via the loudspeaker.
Hold
The current call is put on
hold.
_
g
_
g
Connection put on hold
v
v
Carol
Back
Handsfr. %menu
Now dial the new number
§Handsfr.§ Activate handsfree
(Phonebook/Addressbook F).
talking.
When the new connection is estab-
lished:
§Yes§
Switch on.
; menu§ Open call menu.
_
g
Swap
Swap back and forth
between the calls.
Handsfr. %menu
21
Calling
Call waiting/Swap
Conference
L
L
vice with your service provider and
set your phone accordingly
Call up to 5 parties one by one and
link them together in a conference
call. Some of the functions described
may not be supported by your ser-
vice provider or may have to be en-
abled specially. You have established
a connection:
(page 90). During a call, you may be
advised that there is another call
waiting. You will hear a special tone
during the call. You have the follow-
ing options:
; menu§ Open menu and Hold
select. The current call
is put on hold.
Accept the waiting call
§Swap§
Accept the waiting call
and put the current call on
hold To swap between
the two calls, proceed as
above.
Now dial a new number.
J
When the new connec-
tion is established ...
; menu§ ... open menu and
Conference select. The call
on hold is added in.
End the current call:
Press. The following is dis-
played: "Return to call on
hold?"
Repeat procedure until all
participants are linked together
(max. 5 participants).
B
§Yes§
or
Return to held call.
End
All calls in the conference
§No§
The held call is ended.
B
finish simultaneously
when the End key is
pressed.
Reject waiting call
§Reject§
Reject the waiting call.
or
§Forward§ The waiting call is for-
warded, for example, to
mailbox.
End current call
End the current call.
B
§Reply§
Accept new call.
22
Calling
Call menu
The following functions are only
available during a call:
Babysitter
If this is active, only one number can
be dialed.
Switch on
Swap
(page 21)
(page 21)
§Menu§KSetupKSecurity
KBabysitter
Hold
§Select§
Press.
Microphone
Switch microphone on/off. If
switched off, the person on
the other end of the line
Enter phone code:
J
The phone code (4 to 8 digits) is
set by you and entered at the first
security setting.
Also: *hold down.
Handsfree
Volume
(page 20)
Please don't forget the number!
Adjust handset volume.
(See above)
§OK§
Confirm input.
Conference
Durat/
set, page 34) costs accru-
ing during the connection.
charges
from Addressbook
(page 29) or Phonebook
(page 26) or enter new
number.
Send DTMF
(page 114)
Call trans-
fer L
The original call is connect-
ed to the second one.
For you, both calls are now
ended.
§OK§
Confirm "On".
Main menu
Call status
Access to main menu.
List all held and active calls
(e.g. conference call partici-
pants ).
23
Calling
Use
_
g
Service provider
11/05/2002
12:30
Carol
Use the right soft key and
hold it down to dial (e.g.
Carol's phone number).
Switch off
#
J
§OK§
Hold down.
Enter phone code.
Confirm input.
§Change§ Press.
§OK§
Confirm "Off".
Note
Change phone code.....................page 16
24
Phonebook or Addressbook
ok §Menu§KPhonebook/Addressbook
book
§Menu§KPhonebook/Addressbook
If no business card has been created,
you will be asked for input.
(Standard directory)
KBusinesscard
KSelect function.
Show entries
Entries in standard directory
(Addressbook or Phonebook)
are shown.
Move from field to field to
G
put in your details.
Name:
Fax 2:
URL:
First name:
Select a name with the
Phone/mobile: Street:
G
/
J
first letter and/or scroll.
Phone/office:
Phone:
ZIP code:
City:
A
The number is dialed.
Fax:
E-mail:
E-mail 2:
Country:
Birthday:
Company:
<New entry>
Create new entry in standard
directory.
§Save§
Press.
Phonebook (see page 25)
Note
Addressbook (see page 28)
The content of the business card corre-
sponds to international standards (vCard).
Preferred directory
Select either Phonebook or Address-
book as your standard directory.
Copy numbers from Address-
book/Phonebook.
§Options§ See Addressbook menu
Phonebook or Addressbook
select.
F
(page 30).
§Select§
Set as standard.
Groups
(see page 32)
Businesscard
Create your own business card. Send
this by SMS, infrared or Bluetooth™
to another GSM phone or to a suit-
able PC/printer.
Service numbers
(see page 118)
25
Phonebook
ok Entries in the Phonebook (on the SIM
Name:
Enter first and/or last names.
card) are managed separately from
those in the Addressbook.
You can, however, exchange data
between the Phonebook and the
Addressbook.
Location:
Default: SIM
Select the storage
location such as SIM or
<New entry>
Protected SIM (page 27).
If the Phonebook is set as standard
(Addressbook as standard, page 24):
Record no.:
Each entry is automatically assigned
a record number. You can also dial
using the record number (page 26).
Open Phonebook (in
F
standby mode).
NPhonebook
<Special books>
<New entry>
Carol
Ú
Changing the record
H
number.
§Save§
Press to store the new
entry.
O
Select
Note
Select <New entry>.
D
G
J
OTemporary swap to Addressbook
(page 28).
Select input fields.
dialing code................................page 116
Store control codes ....................page 114
Text entry ...................................page 109
personal phone numbers (page 117),
VIP: Assign important phone numbers to
group, <Service numb.>: see page 118.
Fill in the input fields de-
scribed below. The maxi-
mum number of letters
available is displayed at
the top of the screen.
Number:
Always enter phone number with
prefix.
26
Phonebook
Call (search for an entry) Phonebook menu
The following functions are avail-
Open Phonebook.
F
able, depending on the current situ-
ation. Some functions may be ap-
plied to the current entry as well as
multiple highlighted entries:
/
Select a name with first
letter and/or scroll.
G
J
Dial number.
A
View
Open menu.
Display entry.
Icons in the open entry
¢,¡
Storage location (page 27)
Change
New entry
Open the entry to edit.
Create new entry.
Call using record no.
Copy into 9
Copy new entry/entries into
Addressbook.
A record number is automatically
assigned to every new entry in
Phonebook.
Delete
Delete entry.
Delete all
Delete all entries after con-
firmation.
Enter record number.
J
Mark
Activate highlighting mode,
the entry currently selected
is highlighted (page 116).
Press.
#
Press.
A
Mark all
all entries are highlighted
(page 116).
Change entry
Select entry in
G
Send/Print...
Import
(page 105)
Phonebook.
Import entries and appoint-
ments via IrDA/Bluetooth™
in vCard format.
§Options§ Press and Change select.
Select input field.
G
Capacity
Display maximum and
available capacity.
Edit.
J
§Save§
Press.
28
Addressbook
bookThe Addressbook can store up to
500 entries, each with a variety of
telephone and fax numbers as well
as additional address details. These
entries are managed separately from
those in the Phonebook in the phone
memory. However you can ex-
change data between the Address-
book and the Phonebook on the SIM
card.
§Group§
Entries can be organized
by groups (page 32).
Select with §Change§.
Make further entries, field
by field.
D
Phone/mobile: URL:
Phone/office:
Phone:
Fax:
Street:
ZIP code:
City:
Fax 2:
Country:
Birthday:
Company:
<New entry>
If the Addressbook has been selected
as standard:
E-mail:
E-mail 2:
Open Addressbook
F
Bitmap
(in standby mode).
§Select§ Assign an individ-
ual picture to an Address-
book entry. This picture
will appear in the display
when there is a call from
this particular number
NAddressbook
Ú
<Groups>
<New entry>
Carol
(see Filesystem, page 84).
Import
Select
Input fields
Select <New entry>.
Select the individual fields
that you want.
D
J
NAddressbook
Last name:
§Smith§
§Setup§ Press, then mark
the selected input fields.
§Save§
Save the new entry.
First name:
Clear
Save
Enter first and/or last
name.
29
Addressbook
Note
RSmith, John
§Smith§, John
<Groups> Group functions (page 32).
Birthday After entering the date of birth,
the "reminder box" can be ac-
tivated. Now you can enter the
date and time of the reminder
in the organizer calendar.
Group: §No group§
¿ 055512345
Change
Save
Copy data from another Ad-
¹
§Import§
§Change§ Open entry.
dressbook entry.
Make changes.
The phone is ready to receive
multiple vCard entries via IrDA
or Bluetooth™ (page 105).
Copy international dialing
code from the list (page 116).
§Options§
See below.
§OK§
Save the setting.
§+List§
Right soft key:
O
Temporarily switch to the
Phonebook.
When you jump from line to line while read-
ing, the right soft key changes depending
on the type of data: Press this key to acti-
vate the relevant application:
Synchronizing with a PC
Using XTNDConnect® PC (page 122) you
can synchronize your Addressbook with
Using Remote sync. you can synchronize
your mobile with an organizer stored on the
Internet (page 79).
§VoiceDial Voice dialing menu (page 31).
§E-mail§
§Link§
Create e-mail (page 55).
Visit URL (page 65).
§Show§
Display corresponding picture.
Read/change an entry
Open Addressbook
F
(in standby mode).
Select required entry.
G
§View§
Press.
30
Addressbook
Filter
Display only those Address-
book entries with the follow-
ing criteria:
Call (search for an entry)
Open Addressbook
F
(in standby mode).
• Voice dialing
• E-mail
Select a name with the
first letter and/or scroll.
G
/
J
• URL
• Birthday
• Bitmap
A
The number is dialed.
Copy to SIM
Copy entry/entries with
name and selected phone
number to SIM card.
If an Addressbook entry has several
numbers stored:
RAddressbook
Delete
Delete entry.
¿ 0555123454
Delete all
confirmation.
v
0555987654
À 0555222345
Mark
Switch on highlightingmode
(page 116).
Select
Mark all
Activate highlighting mode,
all entries are highlighted
(page 116).
G
A
Select phone number.
The number is dialed.
Voice dialing
Apply voice dialing to an
entry (page 31).
Addressbook menu
Send/Print...
Import
(page 105)
Depending on the actual situation,
different functions will be offered.
These functions can be applied to
the entry currently selected as well
as to multiple selected entries:
Import entries via IrDA/
Bluetooth™ in vCard
format.
As buisi-
nessc.
Define an entry as your own
business card.
§Options§
View
Open menu.
Display entry.
Capacity
Display maximum and free
capacity.
Change
New entry
Move
Open entry for changes.
Create new entry.
Assign entry to a group.
31
Addressbook
Voice dialing menu
Depending on the actual situation,
different functions will be offered.
Voice dialing
Dial numbers by voice command. Up
to 20 recorded names for voice dial-
ing or voice commands (page 78)
can be saved on the mobile (not on
the SIM card).
§Options
Play
Open menu.
Play back a voice command.
New
Record a new voice
command.
Record
Open Addressbook
Delete
F
Delete voice command from
an entry.
(in standby mode).
Select a name with the
first letter and/or scroll.
G
/
J
Delete all
After confirmation delete all
voice commands for this
entry.
§Options§
Voice dialing
Select.
.
Open menu
Apply voice dialing
Long press on bottom of
Choose phone numbers,
if there are more than
one.
Ó
F
left side key (in standby
mode).
Now say the name. The number is
dialed.
§Record§ Press.
§Start§
Start recording.
Note
A short signal sounds. Now speak
the name. After a second beep and
message in the display, repeat
the name. A beep now confirms
the recording, which is saved
automatically.
Noisy environments may adversely affect
voice recognition. If recording was unsuc-
cessful, press the side key again and re-
peat the name.
32
Groups
9 groups are preset in your phone to
enable you to arrange your Address-
book entries clearly. You can rename
seven groups.
Group menu
§Options§
Open menu.
Open
selected group.
§Menu§KAddressbookKGroups
§View Addressbook,
page 29.
§Options See page 30.
or
Open Addressbook
F
(in standby mode).
Group
symbol
Assign a symbol to a group,
see below.
<Groups> Select (the number of en-
tries is listed behind the
group name).
Rename
group
Change name of group.
£ Groups
Move
Transfer one or more high-
lighted entries from one group
to another.
VIP
(5)
(23)
(11)
Hobby
Business
Delete all
After confirmation, delete all
members of the current
group.
Open
Options
VIP
Select.
Group symbol
Assign a symbol to a group that ap-
pears on the display when one of its
members calls you.
§Options§
Open menu.
Rename group
a name.
Select group.
G
Note
• SMS to group (page 46).
• Special cases:
§Options
Open menu.
Group symbol
Select.
No group: Contains all Addressbook
entries that do not belong to a group
(name cannot be changed).
Receiving: Contains vCard Addressbook
entries received by IrDA or SMS (name
cannot be changed).
Choose a symbol.
Confirm.
H
§OK§
33
Records
Your phone stores the phone num-
Calls received
L
bers of calls for convenient redialing.
Accepted calls are listed.
Requirement:
§Menu§KRecords
The network supports the
"Caller Identity" feature.
§Select§
G
§Select§
G
A
Press.
Select call list.
Press.
Calls dialed
Access to the last numbers dialed.
Fast access in standby
A
Select phone number.
Dial phone number.
mode.
Erase records
The contents of all call lists are
deleted.
or
§View§
Display information on
the phone number.
Call list menu
The call list menu can be called up if
an entry is highlighted.
10 phone numbers can be stored in
each call list:
§Options§ Open list menu.
Calls missed
L
View
View entry.
The phone numbers of calls that you
have received but not answered are
stored for call back purposes.
Correct no.
Load number to display
and edit there if
necessary.
Icon for missed call (in
ꢃ
standby mode). Press the
control key (on the left) to
display phone number.
Save no.to
9
Store entry in the Address-
book/Phonebook.
Delete
Delete entry after
confirmation.
Requirement: The network supports
the "Caller Identity" feature.
Delete all
Delete all entries in call list
after confirmation.
Note
Durat/charges ..............................page 34
34
Durat/charges
You can display charge details and
the duration of different types of
calls while you speak, as well as set-
ting a unit limit for outgoing calls.
A/c limit
L
(PIN 2 query)
Special SIM cards allow you or the
service provider to define a credit or
a period, after which the phone is
barred for outgoing calls.
§Menu§KRecordsKDurat/charges
Select type of call:
Last call
§Change§ Press, enter PIN 2.
A/c limit Activate.
All calls
Remain. units
Enter number of units.
J
§Select§
Display the data.
§OK§
Confirm.
When displayed, you may do the fol-
lowing:
Then confirm the credit or reset the
counter. The status display for pre-
paid cards may vary, depending on
the service provider.
§Reset§
§OK§
Clear display.
End display.
All calls
Charge sett.
Total cost, incoming and outgoing
calls.
§Menu§KRecordsKDurat/charges
KCharge sett.
Incoming calls
Costs for incoming calls are also cal-
culated/communicated.
Conv.
(PIN 2 query)
L
Enter the currency in which the
charge details are to be shown.
Auto display
Call duration and call charges are au-
tomatically displayed for each call.
Personal rate
(PIN 2 query)
L
Enter the charges per unit/period.
35
Organizer
r
Weekly overview
Calendar
Tu
Nov 2002
W45
§Menu§KOrganizerKCalendar
M
T
W
T
F
S
S
You can enter appointments and
tasks in the Calendar. It offers a
• monthly overview,
• weekly overview,
Day
Agenda
Scroll by the hour from
0:00 to 24:00 hours.
G
Time and date must be set for the
Calendar to work correctly
(page 93).
H
Scroll between days.
§Day§
Display the daily over-
view.
Monthly overview
Tu
Nov 2002 W45
Daily overview
Tu
Nov 2002
W45
Week
Agenda
Scroll between weeks.
Scroll between days.
Display weekly view.
G
H
§Week§
Month
Agenda
Each day is divided into six blocks of
four hours (morning + afternoon).
§Agenda§ List of the day's appoint-
H
Scroll between days.
ments and tasks.
Note
Note
Appointments are displayed
by vertical bars.
Time overlaps in appointment
entries are highlighted.
Calendar days in bold face indicate ap-
pointments or birthdays (page 37) on this
day.
You can use the plus-minus side keys on
the phone to scroll between the months or
weeks depending on the current overview.
36
Organizer
Agenda
Delete
Delete selected entry.
§Agenda§ Select in the current over-
Delete all
Delete all entries after
confirmation.
view.
Delete untill
Delete all entries prior to a
certain date.
Tu
11/05/2002
<New entry>
Delete done
Mark
Delete all completed tasks.
q 20:00 Movie
w
v
i
13:00 Garage
Activate highlighting mode,
the currently selected entry
View
Options
Mark all
all entries are highlighted
(page 116).
Appointments (page 37) and, where
applicable, any open tasks (page 39)
for the current day are displayed in
chronological order in the agenda.
Send/Print...
Import
(page 105)
<New entry>
Create new entry as appointment or
as task.
Import tasks and appoint-
ments via IrDA/Bluetooth™
in vCal format.(page 108)
Capacity
Display available capacity.
Calendar options
Different functions are provided, de-
pending on the Calendar item select-
ed or the current organizer function:
§Options§ Open menu.
View
Display entry.
Activate/
Deactivate
Switch alarm on/off.
Done
Change task to
"completed."
Change
New entry
Open entry to make
changes.
Create new entry as
Appointment (page 37) or
Task (page 39).
37
Organizer
Note
Alarm
For additional Calendar settings, see below
under Setup.
§Menu§KOrganizerKAlarm
All appointment entries are dis-
Appointment with "alarm activated".
Appointment with "alarm deactivated".
i
played in chronological order. If an
alarm is missed, it appears in the list
of missed appointments (page 41).
j
o Task.
r Priority task.
List according to type
Types
p Task completed.
q Task deadline exceeded.
Synchronize with PC
Appointment types are
displayed.
With XTNDConnect® PC (page 122) you
can synchronize your appointments with
your phone with an organizer stored on the
Internet (page 79). For this a time zone
must be set (page 93).
Select appointment type.
G
§Select§
Show all appointments of
the selected type.
Enter new appointment
Select <New entry>.
G
Calendar settings
Make the entries field by
field.
F
§Menu§KOrganizerKSetup
§Edit§
Browse through displays
in the selection fields.
Birthdays
Birthdays (and other events) are
shown in bold face.
Y New entry
Type:
§Memo§
Description:
Begin of week
You can set which weekday is listed
first on the left in the monthly and
weekly overviews.
Edit
Save
38
Organizer
Type:
Alarm:
Memo.
§On§
Activate alarm.
u
Description with up to
50 characters.
Enter start time of
the alarm before the
appointment.
J
H
Call.
v
w
Select:
Enter phone number.
Shown with alarm.
Minutes, Hours, Days.
Meeting.
Reoccurrence:
Select a timeframe for repeating the
appointment:
Description with up to
50 characters.
Speech memo.
None, Daily, Weekly, Monthly, Annual.
Enter a parameter for repeating:
Forever, Until, Occurrences (number)
x
Recording a voice memo
at the end of input proce-
dure (see also page 42).
If Weekly is selected, certain week-
days can be highlighted.
Description:
Display in the agenda list.
§Save§
Save the appointment.
The alarm is automatically
activated. If Speech memo
dictating machine is
started for recording
(page 42).
Location:
Location of appointment, e.g. meet-
ing room.
Start date:
Start time:
End date:
End time:
39
Organizer
Alarm
Tasks
When the set date and time are
sual alarm. If an alarm is missed it ap-
pears in the list of missed appoint-
ments (page 41).
§Menu§KOrganizerKTasks
Like an appointment, a task is dis-
played in the agenda of the selected
day. However, unlike an appoint-
ment it does not require a time.
When this is the case, the task ap-
pears daily at the top of the list until
it is marked completed.
Alarm type Memo/Meeting: the text is
shown in the display.
Alarm type Call: the phone number is
displayed for dialing.
Y Tasks
Alarm type Speech memo: to display,
press the key on the right side of the
phone.
Types
<New entry>
o 11/05
21:15 w
§Pause§
The alarm stops for
5 minutes.
Select
§Off§
The alarm is stopped.
List according to type
Note
Types
Types of appointments
are displayed.
An alarm sounds even when the phone is
switched off (the phone does not switch to
standby mode). To deactivate it, press
any key.
Select appointment type.
G
Display indicating that alarms are set:
Show entries for the se-
lected type.
Alarm.
y
Appointments.
u
Deactivate all alarms....................page 72
Set alarm tone..............................page 88
Clock............................................ page 93
§Options§......................................page 36
Select <New entry>.
Select task type (see ap-
pointments, page 37).
G
Description:
Display the list.
Status:
Choose between: Done or Outstanding
40
Organizer
Priority:
Notes
Select between 1 (high) - 5 (low).
Default is 3.
§Menu§KOrganizerKNotes
Use your phone as a notepad.
Use date
å Notes
When Yes is selected, the following
<New entry>
Shopping list
Flight number
option is provided.
Expire time:
Enter date and time.
Select
Alarm:
Enter a time (0-99) and a time unit
(minutes, hours, days) at which an
audible/visual notification of an im-
pending task should be made.
New entry
Select <New entry>.
G
Enter text, 150 characters
maximum.
§Save§
Save task.
J
§Options§ Open menu.
Save
Store entry.
Text entry menu
§Options§ Open menu.
Save
Store entry.
T9 input
(page 110)
T9 preferred: Activate/
deactivate T9.
Input language:
Select language for text.
Line feed
Delete text
Send
Enter line break.
Delete note.
Send entry as SMS
message.
41
Organizer
Display entry
Note
Protect confidential data with phone code
Select entry.
Open note.
G
(page 15).
We recommend that you do not store any
passwords (PIN, TAN etc.) as notes.
§View§
Notes menu
A total of 500 entries can be stored
(appointments, tasks, notes) in the
organizer.
§Options§ Open menu.
Enter special characters.............page 109
View
Display entry.
Confidential
Protect note with phone
code (page 15).
Missed appointments
§Menu§KOrganizerKMissed alarms
Change
New entry
Delete
Display entry for editing.
Create new note.
Delete entry.
Events with an alarm to which
you have not reacted are listed
for reading.
Y Missed alarms
Delete all
Delete all notes after
confirmation.
j
11/03
21:15 w
q 11/05
12:30
18:00
u
v
Delete untill
Mark
certain date.
j
11/05
View
Options
Switch to highlighting mode
(page 116).
Missed appointments menu
§Options§ Open menu.
Mark all
Activate highlighting mode,
all entries are highlighted
(page 116).
View
Display entry.
Delete entry.
Send
Send entry as SMS
message.
Delete
Delete all
Import
Import notices via IrDA/
Bluetooth™ in vNotes
format (page 108).
Delete all entries after
confirmation.
Send/Print...
(page 105)
Capacity
Display available capacity.
42
Organizer
Control using the side keys
In standby mode, the operation is
made quickly and simply via the
side key.
Dictating machine
Use the dictating machine to record
short voice memos.
• Use your phone as a dictating ma-
chine when on the move.
ÒLoud
Record/play
back
as a note for others.
(dictation key)
ÓQuiet
• Add a voice memo to an alarm in
the Calendar (page 38).
• Record a call - useful for remem-
bering numbers or addresses.
Note
New recording
The use of this feature may be subject to le-
gal restrictions under criminal law.
It is important to inform the other party to
the conversation in advance if you want to
record the conversation, and to keep such
recordings confidential.
Hold down the dictation key
throughout the recording. The maxi-
mum possible recording period is
shown. Recording starts after a short
beep.
You may only use this feature if the other
party to the conversation agrees.
Pause
For a recording pause release the
dictation key for a maximum of 10
seconds. If you press the key again,
recording is resumed, otherwise it
will finish.
Save
Releasing the dictation key for long-
er than 10 seconds will finish the re-
cording.
§Stop§
End recording.
Recording is automatical-
ly saved with a time
stamp.
§Save§
§Save§
Name recording.
Save recording.
43
Organizer
Play back
Dictating machine
New
Customer query
Shopping
x
In standby mode, press dictation key
briefly. If the Options menu is set up
accordingly, Handsfree will be offered
(see following).
Play
Options
Operation with display keys
New recording
G
Select recording.
Press.
§Menu§KOrganizer
§Play§
KDictating machine
The list of recordings is opened.
Dictating machine menu
New
§Record§ Start recording
§Pause§ Recording pause.
End recording.
Select.
§Options§ Open menu.
Play
Play recording back.
§Stop§
Handsfree
Activate/deactivate play-
back in handsfree mode.
Recording is automatical-
ly saved with a time
stamp.
New record
Delete
Start new recording.
§Save§
§Save§
Name recording.
Save recording.
Delete selected recording.
Delete all
Delete all entries after con-
firmation.
or
Rename
§Play§
Play back recording
before storing it.
Replace time/date stamp of
recording with a name.
Display
Time zones
§Menu§KOrganizer
KDictating machine
Set the time zone for where you cur-
rently are.(page 93)
The list of recordings is opened.
44
SMS
You can transmit and receive very
long messages (up to 760 charac-
ters) on your phone: these are auto-
matically composed from several
"normal" SMS messages (note higher
charges).
§OK§
Confirm. Send SMS to ser-
vice center for transmis-
sion. The sent SMS is
saved in the "Sent" list.
§OK§
Return to Edit mode.
Display in the uppermost line:
In addition, you can insert pictures
and sounds in an SMS.
SMS
™
1
739
Depending on the service provider,
and e-mails received via SMS
(change setting if necessary,
page 59).
We start at 8
T9 active.
™
abc/Abc/
ABC/123
Switch between upper-
case/lower-case letters
and digits
SMS
1
Writing and sending text
Display title.
Number of SMS messages
required.
739
Number of characters still
available.
Text input using "T9"
J
(page 110) allows you to
create longer messages
very quickly, using just a
few key strokes.
Note
Insert pictures & sounds into text .page 45
SMS profile...................................page 59
Validity period, Service center
will be requested ........................ page 59
SMS status report.......................page 119
Enter special characters.............page 109
§Clear§ Press briefly to de-
lete letter by letter, hold
down to delete an entire
word.
A
Press.
/
Dial number or select
book.
J
N
§Groups§ SMS to group
(page 46).
45
SMS
Text menu
Picture&Sound
Insert pictures and sounds into
message.
§Options§ Open text menu.
Send
Save
Enter recipient's phone num-
ber/select from Phonebook/
Addressbook, then send.
Compose message.
J
§Options§ Open text menu at the
end of a word.
Save composed text in draft
list.
Select Picture&Sound
G
Picture&
Sound
Add pictures, animations
(see following text).
The menu contains:
Fix animations
Fix sounds
Insert text
Format
Insert text blocks
(page 110).
Own animat.
Own pictures
Own sounds
Line feed
Small font, Medium font,
Large font
Underline
Left, Right, Center (align)
Select range.
G
§Select§
Confirm.
Mark text (highlight text
using control key)
The first entry of the se-
lected range is displayed.
Delete text
Delete the whole text.
F
Scroll to entry required.
Insert
from...
Insert entry from Phone-
book/Addressbook.
When Fix animations/Fix sounds:
§Select§
the selection is added to
the SMS.
T9 input
(page 109)
T9 preferred: Activate/
deactivate T9.
Input language:
Select language for text.
When Own animat./Own pictures/
Own sounds:
§Load§
the selection is displayed/
played back.
Print via
IrDA
Send SMS to a suitable
printer.
§Select§
the selection is added to
the SMS.
Send via ...
Select an SMS profile for
transmission (page 59).
46
SMS
Note
Read SMS
Playback only occurs if the destination
phone supports the EMS standard
(page 115).
In input mode, when sound is selected, it is
shown as a wildcard.
Display indicates a new
]
SMS.
_
g
Service provider
SMS to group
11/05/2002
12:30
You can send an SMS message as a
"circular" to a recipient group.
]
Menu
§Options§ Open menu.
Press the left soft key to read
message.
Send
Select.
§Groups§ Press. The Addressbook is
opened in highlighting
Date/time
11/05/2002
55536989876
Are we meeting tomorrow?
Reply Options
23:45
Tel. no./sender
Message
mode (page 116). There
are the following options:
• Highlight individual entries.
• <Groups> Select, open a group
and highlight individual entries/all
entries there
Scroll through message
line by line.
F
• <Groups> Select. Select a group.
§Reply§
See below.
§Send§
Press. The first of the
highlighted recipients is
displayed. If this recipient
has several phone num-
bers, one number can be
selected.
§Options§ (see page 48).
Note
Pictures and sounds in SMS ........page 45
T
Message store full.............page 117
Use §highlighted§ phone number/e-mail
§Skip§ Skip recipient.
§Send§
Transmission is started af-
ter confirmation.
address/WAP address ...............page 118
47
SMS
Reply menu
Lists
All SMS messages are archived in dif-
ferent lists, according to their status:
§Reply§
Open reply menu.
Write mess.
Create a new reply
text.
Inbox
§Menu§KMessagesKInboxKSMS
Change
Edit received SMS or
add new text.
The list of received SMS messages is
displayed.
Answer is YES
Answer is NO
Add YES to the SMS.
Add NO to the SMS.
]
SMS Inbox
ƒ In the next week
… Tomorrow, please brin
… Call me!
Call back
Delay
Thanks
Add a standard text as
a reply to the SMS.
View
Options
When the SMS has been edited in
the edit mode, it can be saved or
sent with §Options§.
Draft
§Menu§KMessagesKDraftKSMS
Ringtones, icons ...
The list of the not yet transmitted
SMS messages is displayed.
You can receive ringtones, icons,
screensavers and animations via an
SMS in which a link is shown. Please
highlight this link and by pressing
Unsent
§Menu§KMessagesKUnsent KSMS
The list of the concatenated SMS
messages not yet completely sent
is displayed. Transmission can be
restarted.
Please ensure that the HTTP profile
(page 70) and the connection
(page 98) are configured.
Sent
§Menu§KMessagesKSent KSMS
The list of sent SMS messages is
displayed.
48
SMS
Lists menu
Each list offers different functions:
Archive
§Menu§KMessagesKArchive
The list of SMS messages stored in
the phone is displayed.
§Options§ Open menu.
View
View entry.
A:\SMS
INBOX
DRAFT
UNSENT
Reply
Directly answer incoming
SMS messages.
Delete
Delete all
Send
Delete selected SMS mes-
sages.
Options
Select
Delete all SMS messages af-
ter confirmation.
Unread
…
ƒ
Dial number or select from
Phonebook, then send.
Read
Draft
Sent
Change
Open SMS message to edit.
‚
„
Capacity
Display free capacity on SIM
card/phone. In case of seg-
ments: number of concatenat-
ed SMS messages.
Entry on SIM card.
¢
X
Concatenated message.
Mark
a.unread
Mark message as unread.
Different functions are available, de-
pending on context:
Save
no.to 9
Copy a highlighted phone
number to Phone/Address-
book.
Archive menu
§Options§ Open menu.
Archive
Move SMS message to ar-
chive.
View
Send
View entry.
Print via
IrDA
Send SMS message to a suit-
able printer.
Dial number or select from
the Phonebook, then send.
Send via
...
Select an SMS profile for
transmission (page 59).
Change
Open editor for changes.
Picture&
Sound
Save pictures or tones from
the SMS.
For further services, see Filesystem,
page 84.
49
MMS
The Multimedia Messaging Service
enables you to send texts, pictures
(including photos) and sounds in a
combined message to another mo-
bile phone or an e-mail address. All
elements of an MMS message are
merged to form a "slide show".
New MMS
Create MMS
MMS templ. 1
MMS templ. 2
Select
Depending on your phone's settings,
you will receive either the complete
message automatically or notifica-
tion that an MMS has been saved in
the network, giving sender and size
details. You may then download it to
your phone to read it.
Select Create MMS.
G
Enter MMS address
/
To: Phone number/e-mail
address of recipient(s).
J
N
N
/
Cc: Phone number/e-mail
address for recipient of
copy.
J
Ask your service provider whether
this service is available. You may
need to register for this service sepa-
rately.
Subject: Enter MMS head-
er (up to 40 characters).
J
Select priority:
Low, Medium, High
G
Writing/sending MMS
messages
G
Delivery time: Yes/No
If Yes, enter date and
time.
§Menu§KMessagesKNew MMS
An MMS message includes address
header and content. Standard mes-
sages are available, which you can
change as you like.
RYou may attach your
business card.
If applicable, import
Calendar.
Y
§Options§ MMS main menu
(page 51).
Note
No more than 20 phone numbers/
addresses, (of 50 characters each) can be
addressed.
50
MMS
Music
§Insert§
Create MMS content
The music list is opened
for selection (see also
Filesystem page 84).
An MMS message can consist of a se-
ries of pages, each one of which may
sounds and pictures.
Slide duration
Texts can be written with the help of
Enter length of display
J
T9 (page 110).
for individual pages
(Minimum 0.1 seconds).
Pictures and graphics produced with
accessories such as digital cameras
can be attached in JPEG, BMP,
WBMP, PMG or GIF format. See
also Filesystem, page 84.
ÒÓ
G
Scroll page by page with
the left side key.
Scroll line by line with the
control key.
Music is sent and received in a MIDI
file, single tones/noises in an AMR
file. Up to 16 KB can be played back.
Check MMS
Check the MMS message before
sending it:
§Options§ Open menu.
§Options§ Open menu.
New slide Select.
The following input is possible on
each page:
Preview slide
View a single page.
Picture/animation
Preview
Play back the whole MMS
in the display.
§Insert§
The picture list is opened
for selection (see also
Filesystem, page 84).
Press any key to break off.
Scroll down with left side
key or control key.
Text
§Edit§
Write text with the help of
T9. Text menu see below.
To send MMS
§Options§ Open menu.
Send
Select.
51
MMS
Text menu
Delete slide
Delete page currently
displayed.
§Options§ Open menu.
Preview slide
Slide list
Playback of complete
page.
Line feed
Save
Start new line.
Display the pages avail-
able for selection.
Save MMS text.
Insert text
Insert text block
(page 110).
Preview
Playback of complete
MMS. Press any key to
break off.
Delete text
Delete the whole text.
T9 input
(page 109)
T9 input
(page 109)
T9 preferred: Activate/
deactivate T9.
T9 preferred: Activate/
deactivate T9.
Input language: Choose
language in which the text
is to be written.
Input language: Select
language for text.
MMS menu
Different functions are available,
depending on context:
§Options§ Open menu.
Insert line
Extend address field by
one line.
MMS editor
Save
Open MMS to edit.
Store MMS in the draft list.
Send MMS.
Send
Insert from...
Insert number from
Phonebook/Addressbook
and appointments/tasks.
Delete text
New slide
Delete the whole text.
Insert new page behind
current one.
Remove Item
Delete element on a page.
52
MMS
Attachment
A single MMS can contain several
attachments.
Receive/read MMS
Indicates reception or no-
‰
tification of an MMS.
§Options§ Open menu.
_
g
AttachmentSelect.
Service provider
Select attachment.
G
11/05/2002
12:30
Menu
§Open§
The attachment is
opened with the available
application.
‰
To read the MMS press the left
soft key.
§Save§
The attachment is saved
under a name.
Depending on the setting, (page 60)
the
Content
Pictures and sounds received in an
MMS can be saved separately. To do
this, stop the MMS by pressing any
key, or alternatively scroll through to
the required page.
• complete MMS is played back or
• the notification is opened.
§Receiving§ Press to receive the
complete MMS.
Press any key to break off
function.
§Options§ Open menu.
Content
Select.
ÒÓ
G
J
Scroll down page by page
with the left side key.
Continue as with attach-
ment above.
Scroll line by line with the
control key.
Call up individual pages
directly by number key.
53
MMS
Lists menu
Each list offers different functions:
Lists
All MMS messages are saved in
various lists:
§Options§ Open menu.
Inbox
Play
Play back MMS.
§Menu§KMessagesKInboxKMMS
Change
Open edit mode for
changes.
The list of MMS messages and notifi-
cations received is displayed. To re-
ceive an MMS subsequently, open
notification and press §Receiving§.
Reply
Reply to MMS immediately.
Receive
MMS
sion of MMS when notifica-
tion is highlighted
Draft
(page 60).
§Menu§KMessagesKDraftKMMS
The list of stored drafts is displayed.
Receiv.all
MMS
Start receipt of all MMS
messages.
Unsent
Forward
Forward MMS to new
recipients.
§Menu§KMessagesKUnsentKMMS
The list of the MMS messages not yet
completely transmitted is displayed.
Delete
Delete selected MMS
messages.
Delete all
Delete all entries after
confirmation.
Sent
§Menu§KMessagesKSentKMMS
Mark a.un-
read
Mark MMS as unread.
The list of sent MMS messages is
displayed.
Save no.to
9
Copy phone number/e-mail
address into Phonebook/
Addressbook.
Attributes
Information on MMS is
displayed:
• Sender
• Arrival time
• Subject
• Size
• Priority
54
MMS
Capacity
Size of current MMS as well
as capacity still available
are shown.
Preview
slide
Play back current page.
Slide list
Attachment
Content
Display pages available for
selection.
Open list of attachments
received.
Selection of page contents
to be archived, such as
picture or sound.
Save
Store MMS in outbox list.
Icon:
Importance:
MMS unread
‰
MMS read
‡
MMS draft
†
ꢄ
Ý
Þ
MMS sent
MMS read and forwarded.
MMS read with dispatched
confirmation.
Notification unread.
Notification read.
Û
Ü
55
E-mail
Your phone has its own e-mail client.
You can use it to create and receive
e-mails.
Add attachments
A file from the file system (e.g. ring-
tone) can be inserted in an e-mail as
an attachment (page 84).
Write/send e-mails
§Attach.§
Open file system.
Select file to be inserted.
Highlight file.
§Menu§KMessagesKNew e-mail
G
Enter e-mail address
§Mark
§OK§
/
To: E-mail address of
recipient(s).
J
N
Copy file as an
attachment.
Cc: E-mail address for the
copy recipient.
E-mail editor menu
Bcc: E-mail address for
blind copy recipient.
§Options§ Open menu.
Insert line
Delete
Extend address field by one
line.
*
Press briefly to write special charac-
ters such as @ (page 109).
T9 helps you write e-mails (page 110).
Delete line in address field.
T9 input
(page 109)
T9 preferred: Activate/
deactivate T9.
Input language:
Select language for text.
Subject: Enter e-mail
header (up to
200 characters).
J
Insert from...
Insert entry from Phone-
book/Addressbook.
Content: Enter text.
J
Attach.
See above.
§Options§ Open menu.
Save
Save in draft list.
Send
Send e-mail.
Send e-mail
Establish connection with
server and send e-mail. If
necessary, select different
access (page 98).
Send later
Transfer to outbox list to be
sent later.
56
E-mail
Receive e-mail
Read new e-mail
§Menu§KMessagesKInbox
§Menu§KMessagesKInboxKE-mail
KReceive e-mail
Select e-mail.
G
Before an e-mail can be read, it must
be retrieved from the server. The ser-
access profile and all e-mails are
transmitted to the inbox list
(page 98).
§View§
The e-mail is displayed.
Switch between small,
normal and large font
sizes.
#
Scroll line by line with the
control key.
G
Note
applicable, attachments. You can restrict
the size of the received messages
(page 61).
A maximum of 50 e-mails can be stored in
the phone. E-mail size is limited to 99 KB.
ÒÓ
Scroll page by page with
the left side key.
The left soft key offers different
functions depending on which text
segment has been selected:
E-mail addresses/phone
º
Synchronizing with a PC
numbers in the message
are §highlighted§ and can be
stored in the Address-
book.
With XTNDConnect® PC (page 122) you
can synchronize your incoming/outgoing e-
mails with Outlook® or Lotus Notes™.
A
Dialphonenumberor
start new e-mail.
E-mail
with
attachment
Importance
§Save§
Save attachment
(e.g. bitmap).
Unread
Read
Draft
ꢅ ”
‹ ꢆ
Š ꢇ
Œ “
§Reply§
§Link§
Reply to sender.
Start WAP browser and
visit URL (page 65).
Sent
57
E-mail
Read menu
Depending on the situation, differ-
ent functions are available.
Lists
All e-mails are stored in various lists:
Inbox
§Options§ Open menu.
§Menu§KMessagesKInboxKE-mail
Reply
The original e-mail is re-
trieved. The sender is en-
tered as recipient and can
be changed as can the
header and CC.
The list of received e-mails is
displayed.
Select e-mail.
G
§View§
The e-mail is displayed for
reading.
Reply to all
Forward
As above, but all recipients
are listed in "Send to" field.
The original e-mail is re-
trieved. Enter the new recip-
ient to whom it should be
forwarded.
Draft
§Menu§KMessagesKDraftKE-mail
The list of draft e-mails is displayed.
Change
To edit, open e-mail in edit
mode.
Unsent
Delete
Delete selected e-mail.
§Menu§KMessagesKUnsent KE-mail
The list of not yet transmitted e-
mails is displayed.
Delete all
Delete all e-mails in the in-
box or outbox.
Font size
§Menu§KMessagesKUnsent
Transfer to server all e-mails waiting
for transmission.
Select font size.
KSend e-mail
Save attach.
The attachment is stored in
the file system (Filesystem,
page 84).
§Menu§KMessagesKUnsent
KSend/rec. mail
Transfer to server all e-mails waiting
for transmission and receive all new
e-mails from server.
58
E-mail
Sent
Send e-mail
Establish connection with
server and send e-mails.
§Menu§KMessagesKSentKE-mail
Receive e-
mail
Establish connection with
server and receive
incoming e-mails.
The list of transmitted e-mails is
displayed.
Send/rec.
mail
List menu
Each list offers different functions:
Establish connection with
server, send e-mails and
receive incoming e-mails.
§Options§ Open menu.
View
(page 56)
Change
Reply
Edit e-mail.
The original e-mail is re-
trieved. The sender is en-
tered as recipient and can be
changed, as can the header
and CC.
Reply to all
Forward
As above, but all recipients
are listed in the "Send to"
field.
The original e-mail is re-
trieved. Enter the new recipi-
ent to whom it should be
forwarded.
Delete
Delete selected e-mail in
phone.
Delete all
Sort
Delete all e-mails in phone.
Sort
• By subject
• By sender
• By recipient
• By date/time
• By status
Not all sort criteria are possi-
ble in all lists.
59
Message profiles
Validity
period
SMS profile
Select period in which the ser-
vice center should try to deliv-
§Menu§KMessagesKSetupKSMS
er the message:
Up to5 SMS profiles can be set. The
transmission characteristics of an
SMS are defined in these. The pre-
setting depends on the SIM card
inserted.
Manual, 1 hour, Three
hours, Six hours, 12 hours,
1 day, 1 week, Maximum*
*Maximum period that the
service provider permits.
Status re-
G
Select profile.
You will receive confirmation
whether delivery of a mes-
sage has been successful or
unsuccessful. This service
may be subject to a charge.
port L
§Options§ Open menu.
Change sett.
Select.
Direct re-
ply L
The reply to your message is
handled via your service cen-
ter when Direct reply is acti-
vated (for information please
contact your service provider).
Service
center
Enter or change the service-
center phone numbers as
supplied by service provider.
Recipient
Enter the standard recipient
for this transmission profile or
select from Phonebook.
SMS via
GPRS
L
GPRS (if available).
Requirement: GPRS is acti-
vated (page 94). Ensure that
your service provider offers
this function.
Message
type
Manual
The message type is request-
ed for each message.
Standard text
Normal SMS message.
Fax
Save aft.
send
Sent SMS messages are
saved Sent in the list.
Transmission via SMS.
E-mail
Transmission via SMS.
New
Activate profile
G
Select profile.
§Activate§ Press to activate profile.
You may need to obtain the
required code number from
your service provider.
60
Message profiles
Relayserv-
er
MMS profile
MMS relay URL, e.g.
http://www.webpage.com
§Menu§KMessagesKSetup KMMS
A number of MMS profiles can be se-
lected. The transmission characteris-
tics of an MMS are defined in these.
IP settings
1. IP address:
Enter IP address.
2. IP address:
Enter IP address
1. Port: Enter port number.
2. Port: Enter port number.
G
Select profile.
§Options§ Open menu.
These settings can be differ-
ent from those of the WAP
browser.
Change sett.Select.
Validity
period
Select the period in which
the service center should try
to deliver the message:
Conn.pro-
file:
Select or set connection
profile (page 98).
Manual, 1 hour, Three
hours, Six hours, 12
hours, 1 day, 1 week, Max-
imum*
*) Maximum period that the
service provider permits.
Activate profile
G
Select profile.
§Activate§ Press to activate profile.
Def.
priority
Send priority: Medium,
High, Low
Default
duration
Length of display for an
MMS page (standard
requirement).
Retrieval
Receive complete MMS or
only notification of arrival.
At once
Receive complete MMS
immediately.
Auto.homenet
Receive complete MMS im-
mediately in home network
Manual
Only the notification is re-
ceived.
61
Message profiles
E-mail access
5 access profiles can be defined.
If no access data have been defined
for the profile, the entry card is
displayed.
E-mail profile
§Menu§KMessagesKSetup KE-mail
KSelect function.
Before using this service, you must
set the server access and your e-mail
options. The data for these may al-
ready have been entered. If not, your
service provider will supply you with
the relevant information. See also
the Internet at:
Alternatively:
§Options§ Press.
Change sett.
Select, then:
User settings
Provider
Select supplier.
Your name.
Note
Login name:
E-mail addr.: *
Your service provider must support the fol-
lowing protocols for successful data ex-
change with the e-mail server:
Your e-mail address,
e.g.:[email protected]
POP3, IMAP4 and SMTP or eSMTP.
E-mails will be MIME-encoded for trans-
mission.
Encryption of e-mail transmission (SSL,
APOP) is not possible at present.
Reply-t.addr.:
Additional e-mail ad-
dress for replies.
User ID: *
Your user ID.
Password: *
Your password.
Server sett.
Downl. only
mails smaller
than
Set maximum size for in-
coming e-mails.
<10> KB
Leave copy on
server?
E-mails will remain on the
server after retrieval or
will be deleted.
POP3 server: *
POP3 Port: *
Enter Internet address if
the server type is POP3
and SMTP.
(standard value: 110)
* Your service provider will supply you with this in-
formation.
62
Message profiles
IMAP4 *
Enter Internet address if
the server type is IMAP4
and SMTP.
IMAP4 Port: *
(Standard value: 143)
Enter Internet address.
SMTP server: *
SMTP port: * (default value: 25)
SMTP Authen-
tic.:
Authentication: Yes/No
SMTP
Password:
A user password will be
required if "Authentica-
tion" is set on Yes.
* Your service provider will supply you with this in-
formation.
§OK§
Save and activate
settings.
General sett.
Enter the preset default of an e-mail
address for blind-copy recipient
(Bcc).
Activate profile
G
Select profile.
§Activate§ Press to activate profile.
63
Voice mail/mailbox
ail/ §Menu§KMessagesKSetup
Save call fowarding number
KVoice message
Calls are forwarded to this phone
number.
Most service providers supply an ex-
ternal voicemail service. A caller can
leave a voice message for you using
this service if
§Menu§KSetupKMobile
KForwarding
Ke.g. UnansweredKSet
• your phone is switched off or not
ready to receive,
Enter call forwarding number.
§OK§
Registration with net-
work. Forwarding will
be confirmed in a few
seconds.
• or you are making a phone call
(and Call Waiting is not activated,
page 21).
Further information on call forward-
ing can be found on page 90.
If voice mail is not part of your ser-
vice provider's package, you will
need to register and settings may
have to be made manually. The fol-
lowing description may vary slightly,
depending on the service provider.
Listen to
A new voice mail can be displayed as
follows:
L
\
Icon plus beep.
Settings:
The service provider supplies you
with two phone numbers:
or
A text message announc-
es a new voice mail or
]
Save mailbox number
Call this phone number to listen to
voice mails left for you.
you receive a call with an automatic
announcement.
Call your mailbox and play the
message(s) back.
§Menu§KMessagesKSetup
KVoice message
Hold down (if necessary
1
/
Select number from
Phonebook or enter/
change it.
J
N
enter mailbox number
once only). Confirm with
§OK§ or §Mailbox§ depending
on your service provider.
§OK§
Confirm.
Away from your home network you
may have to dial a different Mailbox
number and enter a password before
you can listen to any messages.
64
Cell broadcast
§Menu§KMessagesKCell broadcast
Selection from a list
st
Some service providers offer infor-
mation services (info channels). If re-
ception is activated, your "Topic list"
will supply you with messages on
the activated topics.
§Options§ Open list menu.
If a topic is selected in the list you
can view it, activate/ deactivate it,
edit it or delete it.
Auto display
Broadcast
CB messages are displayed in stand-
by mode, longer mesages are
scrolled automatically. This display
can be activated/deactivated for all
or only new messages.
You can activate and deactivate the
Cell Broadcast (CB) service. If the CB
service is activated, standby time for
the phone will be reduced.
Read new CB
All unread CB messages are
displayed.
To "full page view":
#, then press §View CB§.
Topic index
L
Topic list
The list of topics is displayed
for you to choose from. If nothing is
displayed, you must enter the chan-
nel numbers (ID) manually (Topic
list). Please contact your service pro-
vider for details.
Add an unrestricted number of top-
ics to this personal list from the topic
index (Topic index).You can preset
10 entries with their channel
numbers (ID) and, if necessary,
their names.
CB languages
New topic
Receive Cell Broadcast messages in
only one specific language or in all
languages.
New topic Select.
• If no topic index (Topic index) is
available, enter a topic with its
channel number and confirm
with§OK§.
Displays
p,o Topic activated/deactivated.
New messages received on
…
the topic.
• If the topic index has already been
transmitted, select a topic and
confirm with §OK§.
ƒ
Messages already read.
65
Surf & fun
n
Start menu
Internet browser (WAP)
Get the latest WAP information from
the Internet, specifically adapted to
the display options of your phone.
You can also download games and
applications onto your phone. Inter-
net access may require registration
with the service provider.
Home
The connection to the pro-
vider's portal is set up. This
may be defined or pre-set
by your service provider.
Bookmarks
Resume
Up to 50 URLs are stored
in the phone for fast
access.
Call up recently visited
pages that are still in
memory.
Internet access
L
§Menu§KSurf & funKInternet
The browser is activated as soon as
you call up the function. The func-
tions of the soft keys vary, depend-
ing on the internet page, for exam-
ple "link" or "menu." The contents of
the option menus are also variable. If
necessary, set the way in which WAP
access should be made (see Browser
menu, Setup, Start with..., page 66).
Inbox
Inbox for messages from
WAP server (WAP push).
Profiles
The list of profiles is dis-
played for activation/set-
ting (page 67).
Exit browser
Note
Close browser and clear
down connection.
For example, the start menu
appears:
Additional operational advice .....page 120
End connection
Í Start menu
1 Home
2 Bookmarks
3 Resume
É
Hold down to clear down
B
the connection and to
close the browser.
Select
Select required function
Confirm.
G
§Select§
66
Surf & fun
Browser menu
More ...
If the browser is active, the menu
can be activated as follows:
Profiles
The list of profiles is dis-
played for activation/setting
(page 67).
Press
A
Reset
Setup
Restart session and clear
cache.
or
Font size
Protocol parameters
• Push
• Push can force online
• Timeout for unanswered
network requests
E
Í confirm.
Home
The connection to the pro-
vider's portal is set up. This
may be defined or pre-set by
Security
Bookmarks
Up to 50 URLs are stored in
the phone for fast access
(page 121).
• Connection prompt
• Secure prompt
• Current certificate
• CA certificates
• Private Key PINs
• Encryption
Resume
Go to...
Call up most recently visited
page still in memory.
Enter URL to access WAP
page directly, e.g.
Start with...
• Start menu
• Browser menu
• Home
• Resume
• Bookmarks
wap.my-siemens.com
Select from list of most re-
cently visited WAP address-
es.
Inbox
Inbox for messages from
WAP server (WAP push).
Show URL
Reload
Show URL of current page.
Reload page.
About
Openwave
Display browser version.
Disconnect
More ...
End connection.
See below.
Your Internet browser is licensed by:
Exit brows-
er
Close browser and clear
down connection.
67
Surf & fun
Activate WAP profile
Notes
Í
You can change the current profile
each time you access the Internet.
Browser menu
Offline.
Online.
GPRS Online.
No network.
Select special characters,
such as @, ~, \, see page 109
or
É
Ê
Ë
Ì
*
0
G
Select profile.
Activate. The current pro-
file is highlighted.
Set WAP profile
Up to 5 WAP profiles can be set
(if not barred by provider). The en-
tries may vary depending on service
provider:
press repeatedly for:
. ,? ! @ / & ~ + - =
WAP profiles
G
Select profile.
§Menu§KSurf & funKInternet
§Edit§
Open to make settings.
KProfiles
Profile name
Enter/change name.
Preparation of the phone for WAP In-
ternet access depends on the current
service provider:
WAP param.
IP address:
L
• Settings have already been in-
stalled by provider. You can start
immediately.
Enter IP address.*
Enter port number.*
Port:
• Access profiles for a number of
providers have already been set.
Select profile and activate.
Homepage:
Enter homepage, if not set
by the service provider.
Linger time:
Time in seconds after which
a connection should be end-
ed if no input or data ex-
change takes place.
• Access profile must be set
manually.
If necessary, check with service
provider for details.
Account
sett.
Selection or ending of ac-
cess profile (page 98).
* depends on service provider, if necessary,
enter 2nd IP address and 2nd port
§Save§
Save settings.
68
Surf & fun
Games and applications
Applications and links that are
already stored on the phone are
found under:
Games & more
Download games and other applica-
tions. You are advised about relevant
applications on the Internet.
§Menu§KSurf & funKGames & more
Once you have selected a game or
application, you can start to down-
load it immediately. Then you can
use the application.
Games & more
¦Application
§
Game
É MySiemens
Most applications include instruc-
tions.
Options
Select
Note
To download applications, the WAP profile
(page 67), HTTP profile (page 70) and ac-
cess (page 98) must be configured.
Different functions are available
depending on which entry is high-
lighted:
Java™ information.....................page 117
§
Carry out game/application offline
Sounds (ringer)/
silent alert on/off...........................page 88
§Select§
Executable application
can be started immedi-
Applications and games can be
found at:
¦Load game/application online
wap.my-siemens.com
or on the Internet at:
§Select§
Only description file
(page 117); application
has still to be loaded.
ÉLoad link (optional)
§Internet§ The selected Internet
page is loaded.
69
Surf & fun
Receive information
Delete all
Delete all applications/
folders after confirmation.
If information required by an appli-
cation that has already been in-
stalled is received via SMS, the ¦
symbol appears in the display. By
pressing the control key (on the left),
the relevant application is started
and the information is processed.
Rename
Move
Rename highlighted
applications/folders.
Move applications between
folders.
HTTP
profile
The list of profiles is dis-
played for activation/setting
(page 70).
Note
The following key control is used for many
games (virtual joystick):
Reinstall
More Info
Reinstall an application
(update).
Download further instruc-
tions via Internet (WAP),
if available.
1 3
2
6
9
4
7
5
8
Details
Show details of the applica-
tion/folder (name, version,
size, path, producer, date).
Sort
Set sort criteria (alphabeti-
cal, time).
Games&More menu
All functions required for editing and
managing your applications and
folders are found in the Options
menu:
Security
Prompts before download-
ing applications:
Confirm everytime
Confirm once
§Options§ Open menu.
No confirmation
Capacity
Display maximum and
available capacity.
Start
Start application.
Download
An application is download-
ed from the Internet and in-
stalled.
New folder
Delete
Create and name new
folder.
Delete selected application/
folder.
70
Surf & fun
HTTP profile
WAP can be used to download applications from
the Internet. Downloading or running applications
will not affect or change the software already in-
stalled on your Java™-enabled mobile phone.
Siemens excludes all warranty or liability claims
with respect to or in connection with applications
or software that were installed subsequently by
the customer, and were not included in the origi-
nal delivery package. This also applies to func-
tions enabled subsequently at the customer's
instigation. The purchaser bears sole risk for the
loss of, damage to, and any defects arising in, this
device or the applications or software and for any
direct damage or consequential damage of what-
ever nature resulting from the use of these appli-
cations or software. For technical reasons, such
applications or software and subsequent en-
abling of certain functions will be lost in the event
of the device being replaced/re-supplied and may
be lost if it is repaired. In these cases, the pur-
chaser will need to download the application
again or re-enable it. Siemens does not warranty
or guarantee or accept any liability for the cus-
tomer's ability to download or enable applications
again or to do so free of charge.
§Menu§KSurf & funKGames & more
§Options§ Open menu.
G
Select HTTP profile.
Preparation of the phone depends
on current service provider:
• The settings have already been in-
stalled by provider. You can start
immediately.
• Access profiles have already been
set by your provider. Then select
and activate profile.
• The access profile must be set
manually.
provider for details.
Provider
Select or set access profile
(page 98).
Linger
time:
Enter time in seconds after
which a connection should be
ended if no input or data ex-
change takes place.
71
Profiles
A profile allows several settings to be
Setup
made with one function in order, for
example, to adapt the phone to the
surrounding level of noise.
Edit a default profile or create a new
personal profile:
• Five standard profiles are provided
with default settings. They can
however be changed:
G
Select profile.
§Options§ Open menu.
Normal envi.
Quiet environ.
Noisy environ.
Car Kit
Change sett.
played:
Ringer setting ..............................page 88
Volume ........................................page 88
Silent alert ...................................page 88
Call screening ..............................page 89
Info tones .....................................page 89
Key tones .....................................page 89
Illumination...................................page 87
Big letters .....................................page 87
GPRS...........................................page 94
Headset
• You can set two personal profiles
• The special profile Aircraft mode is
fixed and cannot be changed,
(page 72).
Activate
§Menu§KProfiles
When you have finished setting a
function, return to the profile menu
where you can change an additional
setting.
Select default profile or
G
personal profile.
§Select§
Activate profile.
¾
½
¾
Normal envi.
Quiet environ.
Noisy environ.
Options
Select
½
Active profile.
72
Profiles
Profile menu
Aircraft mode
All alarms (appointments, alarm
clock) are deactivated. This profile
cannot be modified. The phone is
switched off when you select this
profile.
§Options§ Open menu.
Change sett.
Copy from
Rename
Change profile
settings.
Copy settings from
another profile.
Activate
Change personal pro-
file (except default
profiles).
Scroll to Aircraft mode.
G
§Select§
Activate profile.
A security prompt must be
confirmed.
If a Siemens original Car Kit is used,
automatically as soon as the phone
is inserted into the cradle
The phone switches itself
off automatically.
Normal operation
(page 104).
The next time you switch on the
phone and return to normal opera-
tion, the profile set previously will be
activated automatically.
Headset
If an original Siemens headset is
used, (page 129), the profile is acti-
vated automatically as soon as the
headset is used (page 104).
73
Extras
Alarm clock
Calculator
§Menu§KExtras
Enter number
(max. 8 digits).
J
KSelect function.
The alarm will ring at the time you
set, even when the phone is
switched off.
Select calculator.
y Alarm clock
Repeat procedure with
other numbers.
z 07:30
J
Mo Tu We Th Fr Sa Su
Result is displayed.
#
Edit
On
Calculator functions
§. = + - * /§ Press the right soft key re-
§On§ / §Off§ Activate/deactivate the
peatedly.
alarm.
±
Toggle between "+" and "-".
Convert to percentage.
Save the number displayed.
Retrieve the number saved.
Exponent (max. two digits).
Setting
§Edit§
%
Ï
Ð
e
Display selected time and
days for alarm calls:
Set time for the alarm call
(hh:mm).
Special keys:
*
H
Navigate to days.
Set decimal point.
Add (hold down).
0
§Edit§
§OK§
Set days for alarm calls.
Confirm settings.
Note
y
Alarm clock switched on.
Alarm clock active
(display in standby mode).
y
z
Alarm clock switched off.
74
Extras
Calculator functions
Currency converter
§§. =§§
Press right soft key
repeatedly:
§Menu§KExtrasKCurrency converter
You may calculate the exchange
rates between three different
currencies.
Ð
Recall a saved number from
calculator.
Convert
Enter the currency
Any combination of calculations may
be carried out between the curren-
cies entered.
If no currency has yet been entered,
press §OK§ for first input.
Otherwise:
Select a combination of
G
§Options§
New entry Select, then if:
Only euro currencies:
Open menu
currencies from the list.
§Select§
J
Confirm.
•
Enter figure
(max. 12 digits).
§List§
Press and select 1st euro
currency:
Result is displayed.
#
§Select§§
F
§List§
Confirm.
§Repeat§ Repeat conversion
with other data.
Select next field.
Calculator menu
Press and select 2nd euro
currency.
§Options§
Open menu.
§Select§
§OK§
Confirm.
Confirm.
Start
Enter value to be
calculated.
•
Euro currencies and/or other
currencies:
New entry
Change
Delete
Enter two new currencies.
Change the two currencies.
Delete the two currencies.
Enter symbols for the
currencies.
J
§OK§
Confirm.
Delete all
Delete all currency pairs
after confirmation.
Enter exchange rate. Save
with §Options§ and §OK§.
J
75
Extras
Stopwatch menu
Stopwatch
§Menu§KExtrasKStopwatch
§Options§ Open menu.
Two intermediate times can be
recorded and saved.
Save
Record the time(s) mea-
sured and assign an icon to
them.
Stopwatch
ç
Reset
Reset stopwatch.
00:00:00,000
Stopwatch
list
Display the stored times.
View Display the stored
times and intermediate
times.
Start
Options
Rename Rename stored
§Reset§
#
Reset to zero.
Start/stop.
entry.
Delete Delete entry.
Delete all Delete list.
Intermediate time.
*
Control using side keys:
Start/stop
Intermed. time
Ò
(
Key at top)
76
Extras
Countdown
Camera (Accessories)
ately view, save and send photos you
have taken with the QuickPic IQP-
5002 camera (page 129).
§Menu§KExtrasKCountdown
A set time elapses. The last 3 sec-
onds are indicated by a beep. At the
end a special beep sounds.
Shots can be taken in two different
formats:
§Set§
Set period of time.
Start counter.
160x120 pixels, memory size up
to 6 KB to send as picture
message(page 49).
§Start§
§Stop§
§Edit§
Interrupt counter.
Change period of time.
• High resolution: VGA
640x480 pixels, memory size of
one shot up to 40 KB - e.g. for
further editing on PC. To allow the
picture to be viewed on the phone
display, a QQVGA picture is creat-
ed for every VGA shot.
§Reset§
Reset counter to starting
time.
§Camera§ Press when the camera
has been attached
(in standby mode).
or
§Menu§KExtrasKCamera
First, the number of shots still avail-
able is shown (dependent on resolu-
tion chosen).
§OK§
Confirm.
The last shot taken is shown.
G
Scroll through photos.
77
Extras
Shot
Camera menu
A shot (especially in high resolution)
requires a few seconds to be pro-
cessed.
§Options§ Open menu.
Use flash
Use flashlight (only when
camera is plugged in)
Ò
Press side key on left; a
new shot is taken, shown
in the display and auto-
matically saved.
Full screen
Delete
Switch to full screen mode.
Delete current picture after
confirmation.
Flashlight
The flash function can be activated/
deactivated in the options menu.
Delete all
Move
Delete all pictures after con-
firmation.
Move currently selected pic-
ture to another folder (if nec-
essary, first choose
resolution). See also file
system, page 84.
If the flash is switched on, a com-
mand is given to charge the flash-
light before taking a shot:
Press left side key briefly;
Ò
Move all
See above.
the flashlight is charged.
Send via ...
Send picture by:
MMS or E-mail.
Press the left side key
again; the shot will be tak-
en with flash.
Ò
Info
Display number of shots still
available.
Note
Setup
Set resolution:
Low
Photograph without flash when the
function Use flash is switched on:
Ò
Hold down left side key. The
charging process for the flash-
light is omitted and a shot is
taken immediately.
High & Low
Note
If the memory is full or the camera is not
attached:
§Delete§
Delete picture currently
shown.
78
Extras
Voice command menu
Voice command
Highlight required entry.
G
Functions can be started by a voice
command. Up to 20 voice recordings
for voice dialing or voice commands
can be saved in the phone (not on
SIM card!).
§Options§
Open menu.
Playing
Play back the recording be-
longing to the entry.
Record
New
Start new recording for an
entry.
sample
§Menu§KExtrasKVoice command
Delete
Delete entry.
A list with available functions is
displayed.
Delete all
Delete all recordings.
G
Select a function.
§Record§ Press.
§Yes§
Confirm selected
function.
§Start§
Start recording.
A short signal sounds. Now say the
command corresponding to the
function: repeat this when prompted.
Apply
Ó
Hold down bottom of
left side key
(in standby mode).
A short signal (beep) sounds and a
prompt appears in the display. Now
say the function.
Noisy environments may affect
recognition.
79
Extras
Server sett.
Remote synchronization
Sync. mode
Fast: Only data that has
changed will be synchro-
nized in both directions.
Slow: All data will be
synchronized in both direc-
tions.
§Menu§KExtrasKRemote sync.
You can use this function remotely
to access externally filed data (ad-
dresses, calendar, etc.) and synchro-
nize these with the data on your
phone. The data can, for example,
be saved on a company computer or
the Internet.
Provider
Select or set the connection
profile (page 98).
Server-
Name
E.g. http://sync.yourcompa-
ny.com/
Syncronize
§Sync§
Computer is selected and
synchronization started.
Server port
Enter port number, e.g. 80.
Login
name:
Enter user name
(Login name).
Sync. setting
§Setup§
Start synchronization.
Password:
Enter password (shown as
a series of asterisks).
Sync. Profile
HTTP au-
thent.
Depends on server
provider.
A number of profiles can be defined.
G Select profile.
§Options§ Open menu.
Change Select.
HTTP name:
Enter user name.
Enter passwort.
HTTP
passw.:
Address
path
Index name with path
details:
Highlight database areas to be
synchronized:
• Addresses
• Calender
• Tasks
Addresses
Calendar
Tasks
• Notes
§Save§
Save settings.
Notes
80
Extras
Activate remote sync. profile
L
SIM services
(optional)
Sync. setup
Select.
Your service provider may offer spe-
cial applications such as mobile
banking, share prices, etc. via the
SIM card.
Sync. Profile
Select.
G
Select profile.
If you have such a SIM card, the SIM
services will appear in the main
menu under "Extras" or directly
above the control key (on the left).
§Select§
Activate. The current
profile is selected.
Symbol for SIM services.
}
Where there are several applications,
these are displayed in a SIM services
menu.
§Menu§KExtrasKSIM services
With the SIM services menu, your
phone is ready to support future ad-
ditions in your service provider's user
package. For further information,
please contact your service provider.
81
Fast access key
ess The left soft key and the number
Left soft key
keys 2 to 9 (speed dialing numbers)
can each be assigned an important
phone number or a function. The
phone number can then be dialed or
the function started at the touch of a
button.
For fast access, a function/phone
number may be assigned to the
left soft key.
Change
Note
_
g
The left soft key may already have a func-
tion allocated by your service provider (e.g.
access to }SIM card services). It may not
be possible to modify this soft key assign-
ment.
Service provider
11/05/2002
23:45
Internet
Menu
The left soft key may also sometimes be
replaced automatically by ]/\to
access a new message.
Key assignments available:
§Edit§
Scroll to application in list.
Internet (WAP) .............................page 65
Phone number .............................page 28
Alarm clock ..................................page 73
New SMS.....................................page 44
Illumination...................................page 87
Hide ID.........................................page 90
Calls missed.................................page 33
Calls received ..............................page 33
Inbox (SMS).................................page 47
My menu ......................................page 83
Call screening ..............................page 89
Filesystem....................................page 84
• Assign a new application (e.g.
New SMS) to the soft key.
name (e.g. "Carol") from the
Phonebook/Addressbooktoassign
to the soft key.
Confirm setting.
Apply
The setting "Carol" is used here only
as an example.
§Carol§
Hold down.
82
Fast access key
Apply
Speed dialing keys
Select a stored phone number
or start a stored application
(e.g. New SMS).
speed dialing numbers for fast ac-
see page 81. Number key 1 is re-
served for the mailbox number
(page 63).
In standby mode:
Press briefly.
3
The assignment of the number key 3
is displayed above the control key
(to right) e.g.:
Edit
In standby mode:
§New SMS§ Hold down.
Press a number key (2- 9).
J
Or simply
If the key is not yet
assigned:
Hold down.
3
§Set§
Press.
or
§New SMS§ Press briefly (if, for examp-
le New SMS is assigned).
§Edit§
Scroll to application in
the list.
Special case Phone
number. Pick out a name
from the Phonebook/
Addressbook for assign-
ment to the key.
Special case Bookmarks.
Scroll to a URL in book-
mark list for assignment
to the key.
§Select§
Confirm setting.
83
My menu
§Menu§KMy menu
Change sett.
Createn menu with frequently used
functions, phone numbers or WAP
pages.
You can replace each preset entry
(1-10) with another entry from the
selection list of My menu.
The list with 10 possible entries is
preset. You can, however, change it
as much as you want.
Select the required entry.
G
§Options§ Press.
Note
Change sett.
For fast access from standby mode you can
set the functionMy menu on the left soft
key (page 81).
Select.
§Set§
Press.
Select the new entry from
G
the selection list.
Activate
§Set§
Press.
Select the required entry.
G
If you have selected a phone number
or a WAP favorite as a new entry, the
corresponding application is started.
§Select§
Press.
or
§Options§ Press.
Reset all
Activate Select.
§Options§ Press.
Reset all Select.
§Select§
Press.
or
After confirmation and entering the
phone code, the default entries are
reset.
If the entry selected is a
phone number, you can
also call it with the Call
key.
A
84
Filesystem
m
To organize your files, you can use
the file system like a PC file manager.
The file system assigns special fold-
ers to different data types.
Internet Browser files
(miscellaneous)
Misc
Sms
Other files
*.*
Sub-indexes:
*.smo
*.smi
§Menu§KFilesystem
Inbox:
Incoming mail
Draft:
Drafts
A list of the folders and files is
displayed.
Navigate through this list using the
control key:
Unsent:
Unsent
Scroll up and down.
G
SMS messages
Sent:
Sent
SMS messages
Go back from folder.
C
§Open§
Open folder or execute
file with related
application
Sounds
Text
*.mid
*.amr
*.mmf
Ringtones, melo-
dies and sounds
or
Text files
*.txt
with unknown file types:
Highlight file.
Text
mod-
ules
Text modules
*.tmo
§Mark§
Index structure
ers to different data types.
Voice
memo
Voice recordings
*.vmo
Anima- Animations
tion (page 87)
(anim)
*.gif
Camera Photos (page 76)
*.col
Colour Color scheme
scheme (page 86)
Pic-
tures
Pictures (page 50) *.bmp
*.jpg
*.gif
*.png
Data
objects
Inbox
85
Filesystem
File system menu
§Options Open menu
Open
Mark
Open folder.
See highlighting mode
(page 116).
Mark all
Move
All entries highlighted, see
highlight mode (page 116).
Place highlighted file or folder
in temporary memory.
Copy
Copy highlighted file into
temporary memory.
Paste
Transfer content of tempo-
rary memory to current
folder.
Delete
Delete current entry.
Delete all entries.
Delete all
New folder
Create a new folder and give
it a name (only one folder
depth available).
Rename
Sort
Change highlighted entry.
Set sort criteria
(alphabetical, type, time).
Attributes
Drive info
Display information on file or
folder selected.
Display capacity used and
available.
86
Setup
Logo
Display
Choose picture to be displayed in-
stead of the provider logo.
§Menu§KSetupKDisplay
KSelect function.
Language
Color scheme
Select color scheme for the whole
service system.
Set display text language. When "au-
tomatic" is set, the language of your
service provider is used. If a lan-
guage that you do not understand
happens to be set, the phone can be
reset to the language of your service
provider with the following input (in
standby mode):
Activate color scheme
Select color scheme.
G
§Select§
Activate.
Load color scheme
A
# 0 0 0 0 #
Up to three color schemes can be in-
cluded in the selection list. These can
be loaded by WAP, for example.
*
T9 input
T9 preferred
§Options§
Open menu.
Activate/deactivate intelligent text
entry.
Load
Select color scheme.
Screensaver
Input language
The screensaver shows a picture on
the display after a specified period of
time. The function is ended by an in-
coming call or by pressing any key.
Select language for text entry. Lan-
guages with T9 support are marked
by the T9 icon.
Background
Note
Set background graphic for display.
screensavers and animations by SMS
(page 44), MMS (page 49) or WAP
(page 65). See also My phone (page 17).
87
Setup
Screensaver Menu
Own greeting
Enter greeting to be displayed in-
stead of animation when phone is
switched on.
Enable
Activate/deactivate screen-
saver.
Style
Analog clock or Bitmap.
§Edit§
J
§OK§
Activate/deactivate.
Bitmap
Select picture in file
system.
Delete old message and
create new message.
Preview
Timeout
Display screensaver.
Confirm changes.
Set period after which the
screensaver starts.
Big letters
Choose between two font sizes for
display.
Security
Phone-code protected ter-
mination of screensaver.
Illumination
Switch display illumination on/off or
set on Automatic (switched off in-
creases standby time).
Start anim.
Select animation to be shown when
phone is switched on.
Shutdn animat
Select animation to be shown when
phone is switched off.
Contrast
Set display contrast.
Press the control key re-
peatedly to adjust display
contrast up or down.
G
88
Setup
Volume
Set different volumes for types of
call/functions.
Audio
§Menu§KSetupKAudio
KSelect function
You can set the tones to match your
needs.
Select:
G
d Calls
Group calls
Ringer setting
On/Off
Activate/deactivate all
tones.
All calls
Alarm
Alarm clock
Messages
Cell broadcast
Beep
Reduce ringtone to a
short signal (beep).
Note
k
j
Display: Beep.
Display: Ringer off.
§Select§
Press.
Set volume.
G
Switch ringtones on/off...............page 119
Display for rising
volume.
Silent alert
To avoid the disturbance caused by a
ringing phone, you can activate the
silent alert function as an alterna-
tive. The silent alert can also be acti-
vated in addition to the ringer (e.g.
in noisy environments). This func-
tion is deactivated when the battery
is charged.
§Select§
Confirm.
Note
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid your hearing possibly being
damaged by a loud ringtone.
Silent alert is activated automatically
if the maximum volume has been set
for the ringtone. This is to remind
you not to hold the ringing phone to your
ear, so that avoid damaging your
hearing.
If two independent phone numbers are reg-
istered on your phone, you can set different
volumes for them (page 120).
89
Setup
§Menu§KSetupKAudio
If you do not accept these calls, they
are forwarded to your mailbox
(if set, page 90).
KSelect a function.
Melodies
Set different ringtones for types of
call/functions.
Note
l
Display:
Filter switched on.
Select:
G
Key tones
How to enter the type of acoustic
key tone:
d Calls
Group calls
All calls
Alarm
Click or Tone or Still
Minute beep
During a call, you will hear a beep af-
ter every minute as a reminder of the
time elapsed.
Alarm clock
Messages
Cell broadcast
§Select§
Press.
Info tones
Set service and alarm tones:
Choose ringtone.
Confirm.
G
§Select§
On/Off
Activate/deactivate tones.
Extended If switched on, a wider
range of service tones is
available, e.g.:
Note
SMS (page 44) or you can download them
via WAP (page 65).
• End of menu,
• Maximum text length reached,
• Network connection broken.
See also My phone (page 17).
Call screening
L
Only calls from numbers in the
Phonebook/Addressbook or in a
group will be signaled audibly or by
silent alert. Other calls are merely
displayed.
90
Setup
Keys
Mobile
§Menu§KSetupKKeys
§Menu§KSetupKMobile
KSelect a function
Any to answer
KSelect function.
Call waiting
L
You can press any key to accept an
incoming call.
you can check whether it is set and
you can activate/deactivate it (see al-
so page 21).
(except
).
B
Auto key lock
Hide ID
L
When the key lock is activated, the
keypad locks automatically if no key
has been pressed for one minute in
standby mode. This prevents the
phone from being used accidentally.
You can, however, still receive calls
and still make an emergency call.
When you make a call, your phone
number can be displayed on the re-
cipient's display (depending on ser-
vice providers).
To suppress this display, you can ac-
tivate the "Hide ID" mode for the
next call or for all subsequent calls.
You may need to register separately
with your service provider for these
functions.
The keypad can also be directly
locked and unlocked
as follows.
Hold down.
#
Forwarding
Key tones
You can set the conditions under
which calls are forwarded to your
mailbox or other numbers.
You can set the type of acoustic key
tone:
Click or Tone or Still
Set up call forwarding (example):
The most common condition for call
forwarding is:
91
Setup
Unanswered
No reply
L
A call is only forwarded after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Select Unanswered.
G
(covers the Not reachable,
No reply, Busy conditions,
see right).
Busy
Forwarding occurs if a call is in
progress. If Call waiting is activated
(page 21), you will hear the call
waiting tone during a call.
§Select§
Set
Press.
Select.
Enter the phone number
to which the caller will be
forwarded (if not already
done).
J
Receiving fax
L
Fax calls are forwarded to a
number with a fax connection.
or
·
Receiving data
L
select this phone number
from the Addressbook/
Phonebook or via §Mailbox§.
Data calls are forwarded to a
phone number with a PC connec-
tion.
§OK§
Confirm. After a short
pause, the setting is con-
firmed by the network.
Check status
You can check the current forward
status for all conditions.
All calls
All calls are forwarded.
L
After a short pause, the current situ-
ation is transmitted by the network
and displayed.
n
Icon in top line of display
in standby mode.
p
Condition set.
Not set.
o
Not reachable
Display if status is un-
known (e.g. with a new
SIM card).
s
Forwarding occurs if phone is
switched off or is out of range.
92
Setup
Clear all
§Menu§KSetupKMobile
L
KSelect function.
All set diversions are cleared.
Fact. settings
Note
Note that the forward is stored in the net-
work and not in the phone (for example
when the SIM card is changed).
The phone is reset to the default val-
ues (factory setting) (does not apply
to SIM card or network settings).
Check condition or delete it
First select the condition.
Alternative input in standby mode:
A
# 9 9 9 9 #
*
§Select§
Check status
Select.
Press.
Format filesys
or
(Phone code protected)
Delete
Select.
The file system memory is formatted
and all data that has been saved is
ringtones, organizer entries, etc.
Save important data in advance
(page 122).
Reactivate forward
The last forward has been stored.
Proceed as with "Set forward".
The stored phone number is displayed.
Confirm phone number.
Edit phone number
Proceed as with "Set forward". When the
stored number is displayed:
§Delete§
Press. The phone number is
deleted.
Enter new number and confirm.
93
Setup
§Menu§KSetupKMobile
Clock
KSelect function.
§Menu§KSetupKClock
Phone identity
The phone identity number (IMEI) is
displayed. This information may be
useful for customer service.
KSelect function
Time/date
The clock must be set to the right
time once at start-up.
# 0 6 #
§Edit§
Press.
*
Checking software version
page 119.
First enter the date (day/
month/year), then the
time (24 hours, including
seconds).
J
Auto off
The phone switches off each day at
the set time.
Note
If the battery is removed for longer than
30 seconds, the clock must be reset.
Setting date format:
Activate:
§Time§
Press.
DD:
MM:
Day (2-digit)
Month (2-digit)
Enter time
J
(24-hour clock).
YYYY: Year (4-digit)
§OK§
Confirm.
Time zones
Deactivate:
Set the time zone for your area.
§Manual§ Press.
§OK§ Confirm.
Select the required time
F
zone from list ...
§Set§
... press to set.
94
Setup
§Options§
Open menu.
Connectivity
DST
Activate/deactivatedaylight
saving time. When daylight
saving time is activated, a
sun icon appears on the
display.
§Menu§KSetup KConnectivity
KSelect function.
GPRS
L
(General Packet Radio Service)
View
Display the selected time
zone with name and date.
GPRS is a new method for transmit-
ting data faster in the mobile net-
work. If you use GPRS and if the net-
work has sufficient capacity, you can
be connected to the Internet perma-
nently. Only the actual transmission
time is charged by the network oper-
ator.
Set
Set time zone.
Rename
Assign a new name to time
zone.
Auto time-
The time zone is switched
automatically to local time
by the network.
zone
L
Some service providers do not yet
support this service.
Format date
§Yes§ / §No§ Activate or deactivate
DD.MM.YYYY or MM/DD/YYYY
GPRS function.
Auto display
Activate/deactive time display in
standby mode.
Shown in display:
«
ª
ꢈ
Activated and available.
Logged on.
Buddhist year
Switch to the Buddhist date (not on
all model variants).
Connection briefly lost.
GPRS info
Display of information on connec-
tion status.
95
Setup
§Menu§KSetup KConnectivity
Bluetooth™
Bluetooth™ is a short-range radio
the options menu of the relevant de-
vice to send data by this route
(page 106).
KSelect function.
IrDA
Your phone has an infrared inter-
face. You can use this to exchange
data (Addressbook entries, business
card, SMS, organizer entries) with
other devices that are also equipped
with an infrared interface.
You can activate/deactivate
Bluetooth™, give your phone a
Bluetooth™ name, and manage the
list of known Bluetooth™ devices.
The infrared interface is on the left
side of the phone. The distance be-
tween both devices must not exceed
30 cm. The infrared window of each
of the two devices should be placed
as close to one another as possible.
Shown in the display
ß
Bluetooth™ activated.
Bluetooth™ visible for others.
Data transfer with
Bluetooth™.
Call made via Bluetooth™.
â
á
§Edit§
Activate/deactivate IrDA.
ã
Shown on the display:
Bluetooth™
ꢉ
When activated.
During the transfer.
You must activate Bluetooth™ to es-
tablish a Bluetooth™ connection be-
tween your mobile phone and other
Bluetooth™ devices.
¬
If IrDA is activated, Bluetooth™ is de-
activated and vice versa.
§Edit§
Activate/deactivate.
My BT name: When you ac-
tivate your phone for the
first time, you can assign
it a name.
If Bluetooth™ is activated, IrDA
(infrared) is inactive and vice versa.
96
Setup
Visib.t.others
Known devices
If this function is activated, then the
address of this device or its
You can include in this list a maxi-
communicate regularly. This simpli-
fies connection setup when sending
(page 106).
Bluetooth™ name is transmitted if
requested by other Bluetooth™ de-
vices. Your phone can be "seen" by
other Bluetooth™ devices. Under
these circumstances, data can be
sent or received.
Displays in devices list:
ä
µ
à
Confidential and linked.
Confidential, not linked.
Linked.
§Edit§
Press.
Visibility is set to: Off
Add new device to list:
Your phone cannot be "seen" by oth-
er Bluetooth™ devices. Known devic-
es such as Bluetooth™ headsets and
Car Kits continue to function.
§Menu§KSetup KConnectivity
KBluetooth
§Options§ Open menu.
Automatic: Your phone is "visible" to
other Bluetooth™ devices for several
minutes. A prompt then asks if the
"visibility" should be continued.
Known devices
Select. The list of known
devices is displayed.
G
Select <New entry>.
Visibility is set to: On
Your phone can be "seen" by other
Bluetooth™ devices as long as
Bluetooth™ is activated.
Either
§Select§
List of most recently con-
nected devices is shown.
§Options§
Open menu.
Select entry and confirm
§Select§.
G
Activate/
Deactivate
Activate/deactivate
Bluetooth™.
Known
devices
See below.
My BT name
Assign a name to the
phone that will appear on
the other party’s display. If
the phone does not have a
Bluetooth™ name, it will
use its own device ad-
dress, which cannot be
changed.
97
Setup
or
Lists menu
§Accessories§
§Options§ Open menu.
Search for Bluetooth™
headsets, along with de-
vices that use the "open
speech protocol" for a
Bluetooth™ connection,
e.g. Car Kit, certain PCs.
The number of devices
found (a maximum of 10)
is shown.
Rename
Rename the device.
New
entry
The list of most recently con-
nected devices is shown.
Delete
Delete device from the list of
known devices.
Delete all
Delete all entries from the
list of known devices after
confirmation.
§View§ Display of devices
found so far. If the device
you are looking for is not
on the list, repeat the pro-
cedure with §Options§ and
§Repeat§.
G
Select device.
§Select§
The device is immediately
added to the list.
or
§Select§
prompt to enter
password.
Enter password for
headset.
J
§OK§
Confirm. The device is
added to the list of known
devices as a trusted item.
Note
Whether a password is necessary or not
depends on the setting of the other
Bluetooth™ device.
Only one headset and one Car Kit can be
present on the list at one time.
98
Setup
GPRS settings
Data services
(General Packet Radio Service)
§Menu§KSetup KConnectivity
KData services
You can activate GPRS for the profile
can only start to use GPRS once you
have activated GPRS on your phone
(page 94).
KSelect function.
For the MMS, Wap and Mail,Java,Rms
applications, at least one connection
profile must be set up and activated.
If it has not been pre-installed, enter
the data or enter the required set-
tings (your service provider will sup-
ply you with information on this):
§Options Open menu.
§Edit§
Select.
APN:
Enter service provider
address.
CSD settings
(Circuit Switched Data)
§Options Open menu.
Login name:
Password:
Enter login name.
Enter password (shown
as a series of asterisks).
§Edit§
Select.
Enter ISP number.
DNS1 / DNS 2:
(optional).
Dial-up
number
§Save§
Save settings.
Call type:
Select ISDN or ana-
logue.
Login name:
Password:
Enter login name.
Enter password (shown
as a series of asterisks).
DNS1 / DNS 2:
(optional).
§Save§
Save settings
99
Setup
§Menu§KSetup KConnectivity
KData services
Send vce/fax
L
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
KSelect function.
Fax/data mode using a PC
While the connection is being set up,
the following function is available
for two seconds:
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
fax and data communication must
be available on your PC and there
must be a connection to the phone.
§Voice/fx§ Switch to Send vce/fax
mode; you may now send
a fax.
Fax and data services must be en-
abled by the service provider. There
are variations in fax and data recep-
tion, depending on the network.
Please ask your service provider
about this.
Voice/fax rec
(Only if a special fax or data number
is not available).
Start the required communication
program on your PC and select the
function on the phone during the call
(the PC will take over the connec-
tion).
§Edit§
Set the required mode.
Rec fax/data
Your service provider has given
L
End transmission
End transmission with PC software
and/or press
you a number for telephoning and a
fax/data number.
.
B
The call is signaled by a special ring-
tone and the type of call (fax or data)
is displayed.
Authentication
§Edit§
Activate encrypted WAP
dial-up (CHAP Challenge
Authentication Proce-
dure) or deactivate it (PAP
Personal Authentication
Procedure).
Now start the communication pro-
gram on your PC to receive the fax/
data.
100
Setup
§Menu§KSetupKSecurity
Security
KSelect a function
§Menu§KSetupKSecurity
Last 10 only
(Phone code protected)
KSelect a function
Both phone and SIM card are pro-
tected against misuse by several
security codes.
Calls are limited to the call list of "di-
aled numbers" (page 33). This list
can be specially filled with phone
numbers:
First delete call list, then create "new
entries" by dialing the phone num-
bers and ending the call before a
connection is made.
Codes
PIN control, Change PIN, Change PIN2,
Chg.phonecode, (page 15).
Babysitter
This SIM only
(Phone code protected)
L
Only one phone number can be di-
aled. Hold down the right soft key
(page 22).
By entering a phone code, the phone
can be linked to a SIM card. Opera-
tion using a different SIM card is not
possible without knowing the phone
code.
Only ,
(PIN 2 protected)
L
Dialling options are restricted to SIM-
protected numbers in the Phone-
book. If only area codes are entered,
relevant phone numbers can be add-
ed to these manually before dialing.
If the phone is to be used with a dif-
ferent SIM card, enter the phone
code when requested.
2 input, the whole Phonebook can be
protected with the phone code
(page 25).
101
Setup
Status check
Barrings
L
The following information can be
displayed after a status check:
Barring restricts the use of your SIM
card (this is not supported by all ser-
vice providers). You need a 4-digit
password, which your service pro-
vider will give you. You may need to
p
Barring set.
o
Barring not set.
Status unknown
(e.g. new SIM card).
register each barring separately with s
your service provider.
Clear all
All outgoing
All barrings are deleted. A password
which the service provider will give
you is needed for this function.
All outgoing calls except emergency
numbers 999 and 112 are barred.
Outgo internat
Only national calls can be made.
Out.int.x home
International calls are not permitted.
However, you can make calls to your
home country when abroad.
All incoming
The phone is barred for all incoming
calls (forwarding of all calls to mail-
box provides a similar effect).
When roaming
You do not receive calls when you
are outside your home network. This
means that no charges are incurred
for incoming calls.
102
Setup
§Menu§KSetupKNetwork
Network
KSelect function.
§Menu§KSetupKNetwork
Choose network
KSelect function
Network search is restarted. This is
useful if you are not on your home
network or want to register on a dif-
ferent network. The network list is re-
built when Auto network is set.
Line
L
This function is only displayed if it is
supported by the service provider.
Two separate phone numbers must be
registered on the phone.
Auto network
Select
Activate/deactivate, see also Choose
network above. If "Automatic net-
work" is activated, the next network
on the list is dialed in ranking order
of your "preferred networks". Alter-
natively select a different network
manually from the list of the avail-
able GSM networks.
Select phone number in current use.
Display current phone
number.
‘
Note
Settings for phone numbers.......page 120
Block line
(Phone code protected)
Pref. network
You may limit usage to one phone
number.
Enter your preferred service provid-
ers here for when you leave your
home network (e.g. if there are dif-
ferences in price).
Network info
The list of GSM networks currently
available is displayed.
Note
Indicates forbidden ser-
²
If the signal strength of the preferred net-
work is inadequate when you switch on the
phone, the phone may register in a different
network. This can change when the tele-
phone is next switched on or if another net-
work is selected manually.
vice providers (depending
on SIM card).
103
Setup
Your service provider is displayed:
§Menu§KSetupKNetwork
KSelect function
§List§
Display list of preferred
networks.
User group
L
Create new entry:
Depending on service provider, you
can create groups with this service.
These can have access to internal
(company) information, for exam-
ple, or special tariffs may apply.
Check with your service provider
for details.
• Select empty line, press §Entry§,
then select another entry from the
list of service providers and con-
firm.
Change/delete entry:
• Select entry, press §Change§, then
select another entry from the list
of service providers and confirm or
press §Clear§.
Activate
Activate/deactive function.
"User group" must be deactivated
for normal phone use (phone code,
page 15).
Band selection
Select either GSM 900, GSM 1800 or
GSM 1900.
L
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are ob-
tained from your service provider.
Fast search
When this function is active, net-
work reconnection is speeded up
(and standby time is reduced).
Outgo. access
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
Preferred grp
If activated, only calls within this
standard user group can be made
(depending on the network
configuration).
104
Setup
Automatic settings:
Accessories
• Permanent illumination:
switched on.
§Menu§KSetupKAccessories
KSelect function.
Car Kit
• Key lock: switched off.
• Charging the phone battery.
Only in combination with an original
Siemens handsfree Car Kit
(page 130). The profile is activated
automatically as soon as the phone
is inserted into the cradle.
• Automatic activation of the Car Kit
profile when phone is inserted in
cradle.
Headset
User-definable settings
Auto answer
(factory default: off)
Calls are accepted automatically af-
ter a few seconds. Eavesdropping is
possible!
Only in conjunction with an original
Siemens headset (page 129). The
profile is automatically activated
when headset is plugged in.
User-definable settings
Auto answer
(factory default: off)
Indication in display.
±
Calls are accepted automatically af-
ter a few seconds (except where the
ringer is switched off or set to beep).
You should therefore be wearing the
headset.
Auto off
(factory default: 2 hours)
The phone is powered by the car's
power supply. The time between
switching off the ignition and deacti-
vation of the phone can be adjusted.
Eavesdropping is possible!
Automatic setting
Accept call with Call key or PTT key
(Push To Talk) when key lock is
activated.
Automatic answer
If an incoming call is not noticed, there is a
risk of eavesdropping by the caller.
105
Print via.../Send via ....
../ The phone provides you with several
Infrared (IrDA)
methods for sending, receiving or
printing texts and data via different
transmission routes. Access to these
functions is available in the option
menu of the relevant application.
These menu items can vary depend-
ing on the application.
....
By IrDA
Application option:
Send/Print... KIrDA
§Send§
The data are sent via the
selected transmission
route.
§Print§
The data are sent to the
connected printer.
All via IrDA
Application option:
Send/Print... KAll via IrDA
All entries from the Phonebook, Ad-
dressbook and organizer are sent or
printed via the infrared port.
§Send§
§Print§
See above.
Set import mode on receiving phone
(page 108).
Receive via IrDA
Please turn on IrDA to receive
(page 95).
106
Print via.../Send via ....
To send via Bluetooth™
Bluetooth™
Send/Print...KBluetooth
Bluetooth™ is a short-range radio
link. It permits wireless communica-
tion between different terminal de-
vices equipped with Bluetooth™
such as phones, phone accessories,
printers and PCs.
If Bluetooth™ is not yet activated,
confirm the query with §Yes§. IrDA
may need to be deactivated
(for settings see page 95).
The following options are now
available:
Known devices
A list of known devices is shown. Use
this function when you are sure that
the device sought is within reception
range.
G
Select device.
Send.
§Select§
Display in device list:
Every Bluetooth™ device has a
unique address and a name. This
guarantees a connection between
the intended communication part-
ners. The security concept is based
on a password that both devices ex-
change when they connect for the
first time. These "trustworthy" part-
password prompt is not required for
future connections. For settings, see
page 95.
ä
µ
à
Confidential and linked.
Confidential, not linked.
Linked.
Note
In some countries, there may be restrictions
on the use of Bluetooth™ devices. Check
with the relevant authorities.
107
Print via.../Send via ....
Search device
Device addr.
Search for Bluetooth™ devices.
The device just found is shown in
the display.
You can directly enter the device ad-
dress in order to set up a connection.
J
Enter device address.
Send.
• Device sought is found:
§OK§
§View§
Search is ended and de-
vices that have been
found are displayed.
Last connect.
The list of most recently connected
devices is shown.
G
Select device.
Send.
G
Select device.
Send.
§Select§
• More than 10 devices found:
§OK§
The search will finish when 10 devic-
es have been found. If the device
you are looking for is not on the list
displayed:
To receive via Bluetooth™
Bluetooth™ must be activated
(page 95). Received files are indicat-
ed by an icon above the left soft key.
§Options§ Open menu.
• Known device:
Retry
Repeat search. If the de-
vice you are looking for is
found, continue as above.
If the sender is a device that is on the
list of known devices, data will be re-
ceived immediately.
• If time limit is exceeded:
• Unknown device:
The search is ended if the maximum
amount of time available is
exceeded.
With an unknown device it may be
necessary to enter a password. This
password will not be saved and can
be reset with each new connection.
Enter password.
J
§OK§
Start transmission.
108
Print via.../Send via ....
The unknown device can be added
to the list of known devices.
Import
Enable transmission for several
objects via IrDA or Bluetooth™ one
after the other.
§OK§
Confirm query.
Shown in the display:
ß
Bluetooth™ switched on.
Bluetooth™ visible to others.
Bluetooth™ with data transfer.
Call takes place via
Bluetooth™.
Files received via Bluetooth™, IrDA
or SMS are stored in the file system
(page 84).
â
á
ã
SMS
Phonebook and Addressbook entries
and appointments can be sent as an
SMS to other suitable mobile
phones.
With larger items, several SMS mes-
sages may be generated and sent as
a concatenated message.
SMS as text
Business cards, Addressbook entries
or appointments can be sent as text
messages by SMS (this may result in
several being generated).
109
Text entry
y
Press once/repeatedly:
. ,? ! ’ " 0 - ( ) @ / : _
0
Enter text without T9
Press number key repeatedly until
the required letter appears. The cur-
sor will jump forward after a brief in-
terval. Example:
Hold down: Writes 0.
Writes blank. Press twice
= jumps a line.
1
Press once briefly for a,
2
twice for b etc. The first
letter in each name is
automatically written in
UPPER CASE.
Special characters
Press briefly. The symbols
chart is displayed:
*
Hold down to write the
number.
1
)
¿
’
¡
:
_
*
;
.
,
?
!
+
-
"
/
(
)
$
Ä,ä/1-9
Numbers and letters with
accents are displayed af-
ter the relevant letters.
¤
{
¥
}
£
~
€
@ \
&
|
#
^
Ω
[
]
%
Λ
<
Π
=
>
§
Γ
∆
Θ
Ξ
§Clear
Press briefly to delete the
letter before the cursor,
hold down to erase the
whole word.
Σ
Φ
Ψ
1) Line skip
G, H
Move the cursor
(forwards/back).
H
#
Navigate to symbol.
Press.
Press briefly: Move back
§Select§
and forth between abc,
T9
T9
Abc, abc, Abc, 123.
Status shown in top line
of display.
Input menu
With text input:
Hold down: All input modes
Hold down. The input
*
are displayed.
menu is displayed:
Format (SMS only)
Input language
Mark text
Press briefly: Select special
symbols (page 109).
*
Hold down: Open the input
menu.
Copy/Add
110
Text entry
Predef. text
Text input with T9.
Text blocks can be stored in the
phone for adding to your SMS mes-
sages.
"T9" deduces the correct word from
the individual key entries by making
comparisons with an extensive
dictionary.
Write text blocks
§Menu§KMessagesKPredef. text
§Options§ Select New entry.
Activate, deactivate T9
§Options§ Open text menu.
T9 input Select.
Write text block.
J
T9 preferred
Select.
§Options§ Select Save.
§Edit§
Activate T9.
Accept the default name
or give it a new name,
then save with §OK§.
Select Input language
Select the language in which you
want to write.
Use text blocks
§Options§ Open text menu.
Write message.
J
T9 input Select.
§Options§ Open text menu.
Input language
Select.
Select Insert text.
G
§Select§§
Confirm; the new lan-
guage is set. Languages
with T9 support are
Select text block from
the list.
G
marked by the T9 symbol.
§Select§
§Select§
Confirm. Text block is
displayed.
T9 language versions
If you want to load a dictionary in another
language, you will find a large selection to
download, plus related installation instruc-
tions, in the Internet under:
Confirm. The text block is
inserted to the right of the
cursor, in the message.
111
Text entry
Write a word using T9
T9 word suggestions
Since the display changes as you
proceed
If several options are found in the
dictionary for a key sequence
(a word), the most probable is dis-
played first. If the word you want has
not been recognized, the next sug-
gestion from T9 may be correct.
it is best to finish a word without looking
at the display.
Simply press the keys once only
where the relevant letter is located.
For "hotel," for example, type:
The word must be §highlighted§. Then
press again. The displayed
»
press T9Abc briefly then
#
word is replaced with a
different word. If this
word is also incorrect,
468 3 5
Press. A blank ends a
press again. Repeat
»
1
word.
until the correct word is
displayed.
Do not use special characters such as
Ä. Instead, write the standard char-
acter, e.g. A, and T9 will do the rest
for you.
If the word you want is not in the
dictionary, it can also be written
without T9.
Note
™
SMS
At 8 we are
1
___
748
Entering a period finishes a
0
word, if it is followed by a
blank. Within a word, a period
represents an apostrophe or
hyphen:
Spell
»
e.g. §provider.s§ = provider’s.
Move to the right. Ends a word.
D
To add a word to the dictionary:
Press briefly: Switch be-
§Spell§ Select.
#
tween: abc, Abc, T9abc,
The last suggestion is deleted and
the word may now be entered with-
out T9 support. Press §Save§ to add it
automatically to the dictionary.
T9Abc, digits. Status indicator
in the top line of the display.
Hold down: All input modes
are displayed.
*
symbols (page 109).
Hold down: Open input menu
(page 109).
112
Text entry
Correct a word
Words written using T9:
Move left or right,
H
word by word, until
the required word is
§highlighted§.
Scroll through the T9
»
word suggestions again.
§Clear§
Deletes the character to
the left of the cursor and
displays a new possible
word!
Words not written using T9:
Move letter by letter to
H
the left/right.
§Clear§
Deletes the character to
the left of the cursor.
Characters are inserted at
the cursor position.
J
Note
Within a "T9 word", individual letters may
not be edited without first removing T9. In
most cases it is better to rewrite the com-
plete word.
®
T9 Text Input is licensed under one or more of
the following: U.S. Pat. Nos. 5, 818, 437, 5, 953,
541, 5, 187, 480, 5, 945, 928, and 6, 011, 554; Ca-
nadian Pat. No. 1,331,057; United Kingdom Pat.
No. 2238414B; Hong Kong Standard Pat. No.
HK0940329; Republic of Singapore Pat. No.
51383; Euro.Pat. No. 0 842 463 (96927260.8) DE/
DK, FI, FR, IT, NL, PT, ES, SE, GB; and additional
patents are pending worldwide.
113
Display symbols (selection)
Display indicators
ª
©
Ê
Registered.
Signal strength.
_
h
d
n
GPRS Download.
WAP Online.
n)
Charging.
Loading status, e.g. 50%.
All calls are fowarded.
Ringer off.
WAP via GPRS Online.
WAP No network.
Headset mode.
Ë
Ì
j
ꢊ
k
Short ringtone (beep) only.
±
Auto answer feature on.
Ringer only, if caller is stored in
the Phonebook/Addressbook.
Organizer/Extras icons
l
Memo.
u
i
Alarm set.
Call.
v
Alarm active.
y
Appointment.
w
µ
Key lock activated.
Phone numbers/names:
On the SIM card
Dictating mach./voice memory.
x
{
t
Birthday.
¢
¡
Important event.
Alarm clock/stopwatch.
On the SIM card
(PIN 2 protected).
y/ç
Soft keys
]
In phone memory.
v
²
Message received.
Voice mail received.
Unanswered call.
No network access.
\
ꢃ
Function activated/deactivated.
Phonebook/Addressbook.
p,o
N
Store in Phonebook/
Addressbook.
ꢂ
º
ABC/
Abc/abc
Indicates whether upper- or low-
er-case letters are active.
Retrieve from Phonebook/
Addressbook.
·
¹
Text input with T9.
™
ꢉ
IrDA activated.
Change Phonebook/
Addressbook.
O
IrDA during transmission.
Bluetooth™ activated.
Activated and available.
¬
ß
«
114
Notes A-Z
Z
Press until a "+" appears
on the display (pause for
connection setup).
Battery quality statement
0
The capacity of your mobile phone
battery will reduce each time it is
charged/emptied. Storage at too
high or low temperatures will also
result in a gradual capacity loss. As a
result the operating time of your mo-
bile phone may be considerably re-
duced, even after a full recharge of
the battery.
Enter DTMF signals
(digits).
J
If necessary enter further
pauses of three seconds
each to ensure correct
processing at destination.
0
Enter a name.
Press.
J
Regardless of this, the battery has
been designed and manufactured so
that it can be recharged and used for
six months after the purchase of
your mobile phone. After six
months, if the battery is clearly suf-
fering from loss of performance, we
recommend that you replace it.
Please buy only Siemens original bat-
teries.
§Save§
You can also store just the DTMF
tones (digits) without a phone num-
ber and send these during a call.
Dial-up access CSD
(Circuit Switched Data)
Data transfer is made via a data con-
nection to a default IP address of
your network provider or service pro-
vider. This connection can be used
for the exchange of data (e.g. for ac-
cess to the Internet or for download-
ing games and applications as well
as for using WAP services).
Control codes (DTMF)
Sending conrol codes
You can enter control codes (digits)
during a call so that an answering
machine can be controlled remotely.
These digits are directly transmitted
as DTMF tones (control codes).
As long as this connection is estab-
lished to use services or to download
applications from the Internet,
charges for the connection accrue
according to the price list of your
network provider or service provider.
; menu§ Open call menu.
Send DTMFSelect.
Use the Phonebook
Save phone numbers and control
codes (DTMF tones) in the Phone/
Addressbook like a normal entry.
Enter phone number.
J
115
Notes A-Z
With EMS, pictures and sounds can
Dial-up access GPRS
(General Packet Radio Service)
L
also be sent (e.g. as screensavers
and ringtones).
GPRS is a new method for transmit-
ting data faster in the mobile net-
work. If you use GPRS and if the net-
work has sufficient capacity, you can
be connected to the Internet perma-
nently.
This can result in messages exceed-
ing the length of a single SMS. In this
case individual text messages are
concatenated to form a single
message.
Some service providers do not yet
support this service.
Extending numbers in the
Phonebook/Addressbook
When entering a phone number in
the Phonebook/Addressbook, digits
can be replaced by a question
mark "?":
Emergency number (SOS)
Only to be used in real emergencies!
By pressing the soft key, §SOS§ you
can make an emergency call on any
network without a SIM card and
without entering a PIN (not available
in all countries).
#
Hold down.
This space must be filled in before
dialing.
Select the phone number to call
from the Phonebook/Addressbook:
EMS
(Enhanced Messaging Service)
Besides (formatted) texts, you can
also send
A
Press.
Replace "?" with digits.
Press, number is dialed.
J
• pictures (bitmaps) up to max.
32 x 32 pixels (black and white),
A
• sounds,
• animations (sequence of 4 pic-
tures) 8 x 8 and 16 x 16 pixels
(black and white),
using the EMS.
The elements listed above can be
transmitted individually or together
in an SMS.
116
Notes A-Z
Highlighting mode
HTTP
With some applications (e.g. Ad-
dressbook) one or more entries in a
list can be highlighted to carry out a
function jointly.
(Hypertext Transfer Protocol)
HTTP is the name given to the proto-
col that governs data transmission in
tions you can download applications
and games (Games & More,
tones from the Internet. Configuring
an HTTP link using the HTTP profile
(page 70).
§Options§
Open menu.
Mark text Activate marking mode.
NAddressbook
o
o
p
Anne
Barbara
Carol
International dialing codes
Mark text
Options
Many international dialing codes are
stored in your phone. In standby
mode (0not necessary when dial-
ing from the Phonebook):
If an unmarked entry is selected, this
can be highlighted:
Hold down until a "+" is
0
§Mark text§ The current entry is high-
displayed. This replaces
the first two digits of the
international dialing
code.
lighted.
If a highlighted entry is selected, the
highlighting can be deleted:
§Unmark§ Unmark the current entry.
§+List§
Press.
Highlighting function in options
menu:
Select the required country. The in-
ternational dialing code is displayed.
Now add the national number
(in many countries without the first
digit) and press the Call key.
§Options§
Mark all
Open menu.
Highlight all entries.
Unmark all
Delete highlighting on all
marked entries.
117
Notes A-Z
JAD ¦and JAR §
Java™
Three file types occur when using
Java™:
Java™ allows you to use numerous
games and applications on your mo-
bile phone. You can download these
applications from the Internet and
install them on your mobile phone.
The application can be started after
installation. Please refer to the
operating instructions for each
application.
The JAD file (Java Descriptor)
These files contain information on
the application (JAR file) and their
address for downloading. By activat-
ing a JAD file, the connection to the
Internet is established and the exe-
cutable application is loaded.
Siemens does not guarantee that
the downloaded and installed Java
applications will work well with your
mobile phone (page 70).
The JAR file (Java archive)
This file includes the executable ap-
plication. By activating a JAR file, the
application is started.
TMessage memory full
Combined files
The SIM memory is full when the
message icon flashes. No more SMS
messages can be received. Delete or
save messages (page 48).
These files result from JAR files being
loaded via JAD files. In this case the
JAD file is inserted into the JAR file.
The display icon is the same as for
JAR files.
Outside your own home network
The following icons appear when using Ja-
va™:
network your phone will automati-
cally dial a different GSM network
(page 102).
JAD file
¦
§
JAR file
Own numbers
You can enter your "own numbers"
in the Phonebook (e.g. fax) for infor-
mation. These numbers can be
changed or deleted and also sent
as an SMS.
118
Notes A-Z
To do this the HTTP profile
Performance
A full battery will deliver between
60 to 300 hours of standby time or
100 to 360 minutes of talktime.
(page 70), or the WAP profile
(page 67) must be installed and
activated.
Press to dial the phone
A
The length of performance depends
on the operating conditions:
number/download.
Quick menu selection
Operation Time Decrease in the
carried out (mins) standby time by
All menu functions are numbered in-
ternally. By entering these numbers
one after the other, the function
may be started at once.
Calling
1
1
30 - 60 minutes
30 minutes
Display
back light *
E.g. to write a new text message:
Network
search
1
5 - 10 minutes
§Menu§
Press.
5
for Messages
for New SMS
* key input, games, organizer, etc.
1
If the phone is exposed to extreme
heat, standby time is reduced con-
siderably. Avoid exposing the phone
to direct sunlight or placing it on a
radiator.
Service numbers
There may be numbers saved in the
Phonebook (<Special books>, <Service
numb.>, page 25) that were put there
by your service provider. You can call
local or nationwide information ser-
vices or use services of the service
provider.
Phone number memo
You can type in a phone number on
the keypad during a phone call. The
person you are talking to will hear
this. The number can be stored or di-
aled after the current call has ended.
Set Forward
§Forward§
Phone number/URL in SMS
for example, if forwarding Busy
(page 90) is set and the Call waiting
(page 90) function is activated.
Phone numbers §highlighted§ in the
text can be dialed or stored in the
Phonebook/Addressbook. URLs
(Internet addresses) can be called
up directly and the HTTP download
started.
119
Notes A-Z
The confirmation Message sent! only
Signal strength
indicates transmission to the service
center, which then tries to deliver
the message within a certain time-
frame.
<
>
Strong signal.
A weak signal reduces the
call quality and may lead
to loss of connection.
Change your location.
See also "validity period", page 59.
Software version
To display the software version of
your phone in standby mode enter:
SIM card problems
You have inserted your SIM card.
Despite this, the following message
appears:
# 0 6 #, then press §Info§.
*
Please insert your SIM card
Please ensure that the card is correct-
ly inserted and the contacts are
clean; if necessary, clean them with
please contact your service provider.
Switch ringtones on/off
*
Hold down.
In standby mode
All sounds (including the ringtone)
can be switched off and then on
again.
See also "Questions & Answers"
page 124.
During a call
SMS Push
Switch off the ringtone only for the
current call/alarm (not if "Any key
answer" page 90 is active):
Accepting or refusing the call ends
this function.
This function allows you to call up an
Internet address (URL) straight from
a text message. After selecting it, the
URL is highlighted. By pressing the
Call key, the WAP browser is auto-
matically started and the highlighted
Internet address is called up.
• The call will still be displayed.
• The silent alert remains active if it
has been switched on previously.
SMS status report
• The sound settings will remain
unchanged.
If the phone was unable to send the
message to the service center, a
retry option is available. If this at-
tempt also fails, contact your service
provider.
The function will end when the mo-
bile is switched off.
120
Notes A-Z
Two phone numbers
WAP usage
L
Special settings can be given to each
phone number (e.g. ringtone, call
forwarding etc.). Switch to the re-
quired number first.
Start with...
You can set which functions are to
be displayed after Internet access:
Open the browser menu.
A
To switch the phone number/line in
standby mode:
More ...
Setup
Select.
Select.
0
Press.
Press.
§Line 1§
Start with... Select, then select from
the list:
WAP
Start menu
Browser menu
(Wireless Application Protocol)
WAP is a technical standard that pro-
vides the basis for connecting mo-
bile radio networks with the Inter-
net. WAP allows you to surf the
Internet using a mobile phone,
download games and applications
and to use WAP services such as
news, stock market data and infor-
mation services.
Home
Resume
Bookmarks
Directly enter Internet address (URL)
A WAP page must be shown in the
display (online or offline):
Open the browser menu.
A
Special characters for WAP usage
0
Press repeatedly for:
. ,? ! ’ " 0 - ( ) @ / : _
Go to URL
Select.
Enter URL and confirm.
J
The connection is
established.
121
Notes A-Z
Changing the home page
Online (save):
The address of the homepage is set
in WAP parameters (page 67).
Add bookmark
The current WAP address
is accepted as a book-
mark.
A WAP page must be shown in the
display (online or offline):
Offline (save):
Open the browser menu.
A
(Empty)
§Menu§
G
Select.
More ...
Profiles
Press.
Open menu.
Select.
New entry Select, enter
name/header and URL
and confirm.
Select the profile, for example:
e-Commerce
Select.
§Save§
Press.
§Edit§
The entry card is
displayed.
To use:
WAP param.,
then select Home
A
Open the browser menu.
Bookmarks Select.
Enter new address. Go to
end of entry card.
J
G
Select bookmark/file.
§Save§
Press.
§Go§
The bookmark selected is
dialed.
Bookmarks (URLs)
The list of bookmarks can con-
L
tain a maximum of 10 entries or
files. Each file can contain further
bookmarks or files.
Without SIM card
If you switch on the phone without a
SIM card, you can use some of the
phone functions.
Save:
§Menu§
Press soft key. The func-
tions are displayed.
A
Open browser menu.
BookmarksSelect.
§SOS§
Emergency, SOS.
122
Siemens Data Suite
Siemens Data Suite is a software pack-
age on the CD-ROM enclosed in this
pack. You can use it to increase the
functionality of your mobile togeth-
er with a Windows® PC. Phone and
PC are connected with one another
via infrared (IrDA) or Bluetooth™ link
or a data cable.
Synctool
te
®
(XTNDConnect PC)
With this module you can synchro-
nize the organize databases on your
phone with your PC. The software
synchronizes your phone automati-
®
cally with Outlook or Lotus Notes™.
Siemens Data Suite contains the mod-
ules described briefly below. You will
find detailed information in the on-
line help on the CD-ROM.
A detailed list of the PIM versions
supported can be found in the online
help in the Siemens Data Suite.
Bitmap Editor
Data Exchange Software
The Data Exchange software works
with Windows® Explorer like an ex-
tra drive, and mirrors the contents of
the file system (page 84) on your
phone.
of the network operator's logo
(page 87).
• Create a screensaver (page 86) on
the PC and transfer this to your
phone.
You have these options:
• Access the data in the applications
on the phone and synchronize
these with the PC by easy drag and
drop.
• Convert voice phone messages
into the well-known WAV format.
Warning!
When you access the file system, please
ensure that no files are deleted that are es-
sential to running applications on the mo-
bile phone, e.g. the "Licenses" index.
123
Siemens Data Suite
Contacts management
Messenger
With Contacts Management you can
organize the contacts from your
phone's Addressbook and Phone-
book and even synchronize these
with other phones (including your
With Messenger you have the conve-
nient option of organizing your SMS
activities from your PC:
• Save your text messages on your
PC in order to free up memory on
your phone.
®
Siemens DECT handset) or Outlook
on your PC.
• You can write messages with your
PC and send them by phone.
You can create new entries on your
PC, delete or change entries, and
copy these onto your phone. If you
that meet the EMS standard can
be included in SMS messages
(page 115).
®
don't have Outlook on your PC, it is
possible to import or export a text
file.
Ringtone Editor
You can create your own ringtones
with the Ringtone Editor (MIDI files).
GPRS Modem Assistant
The GPRS Modem Assistant enables
a GPRS link to be created from a lap-
top, which gives you Internet access
with laptop and mobile while on the
road.
124
Questions & Answers
s &
If you have questions relating to use of your handset, we are ready to help you at our website
www.my-siemens.com/customercare around the clock. For your information we have list-
ed below some frequently asked questions and answers.
Problem
Possible causes
Possible solution
Phone cannot On/Off key not pressed long
be switched on. enough.
Press On/Off key for at least two seconds.
Battery empty.
Charge battery. Check charging indicator in display.
Clean contacts.
Battery contacts dirty.
See also below under "Charging
error"
Standby time is Frequent use of organizer and
Restrict use if necessary.
too short.
games.
Speed search activated.
Display illumination on.
Deactivate speed search (page 103).
Switch off display illumination (page 87).
Unintentional keystrokes (illumi- Activate key lock (page 90).
nation!).
Charging error Battery totally discharged.
(charge icon
not displayed).
1) Plug in charger cable, battery is on charge.
2) Charge icon appears after approx. 2 hours.
3) Charge battery.
Temp. out of range
41 °F to 104 °F.
Make sure the ambient temperature is right, wait for a
while, then recharge.
Contact problem.
Check power supply and connection to the phone.
Check battery contacts and device interface, clean
them if necessary, then insert battery again.
No power supply.
Wrong charger.
Battery faulty.
Use different power socket, check power supply.
Only use original Siemens accessories.
Replace battery.
SIM error
SIM card not inserted correctly.
Dirty SIM card contacts.
Check that the SIM card is inserted correctly (page 9).
Clean SIM card with a dry cloth.
SIM card with wrong voltage.
Use 3V SIM cards only.
SIM card damaged (e.g. broken). Carry out a visual check. Change SIM card at service
provider.
125
Questions & Answers
Problem
Possible causes
Possible solution
No network
connection.
Weak signal.
Move higher, to a window or an open space.
Outside GSM range.
Invalid SIM card.
Complain to the service provider.
New network not authorized. Try manual selection or select a different network
(page 102).
Network barred.
Try again later.
Network overloaded.
Signal too weak.
Phone loses
network.
(page 102). Switching phone off and on again can
speed this up.
Calls not possible. Second line set.
New SIM card inserted.
Set first line‘(page 102).
Check for new barrings.
Load credit.
Charge limit reached.
Credit used up.
Certain uses of
phone not possible.
Call restrictions in place
(page 101).
No entries in Ad-
dressbook possible.
Phonebook is fulll.
Delete entries in Phonebook or transfer to Address-
book (page 25).
Voice mail not
functioning
Call forwarding to mailbox
not set.
Set call forwarding to mailbox (page 90).
SMS (text mes-
SMS memory is full.
To free up capacity, delete (page 48) or file (page 48)
text messages (SMS).
sage) Tflashing.
Function cannot be Not supported by service
Contact your service provider.
set.
provider or registration re-
quired.
Capacity problems Handset memory full.
with, for example,
Delete files in the relevant areas.
Games & More,
ringtones, pictures,
SMS archive.
No WAP access,
downloading not
possible.
Profile not activated, profile Activate (page 67), set (page 67) WAP profile or
settings wrong/incomplete. HTTP profile (page 70). If necessary ask your service
provider.
126
Questions & Answers
Problem
Possible causes
Possible solution
Text message cannot Service provider does not support
Contact your service provider.
be sent.
this service.
Phone number for service center not Set service center (page 59).
set or incorrect.
SIM card contract does not support Contact your service provider.
this service.
Service center overloaded.
Repeat message.
Recipient does not have a compati- Check.
ble phone.
EMS pictures and
Destination phone does not support
sounds not displayed the EMS standard.
at destination phone.
No Internet access
possible.
Incorrect WAP profile set, or wrong Check settings or ask contact service
or incomplete settings.
provider.
PIN error/
PIN2 error.
Three wrong entries.
Enter the PUK (MASTER PIN) supplied
with the SIM card according to the instruc-
tions. If the PUK (MASTER PIN) has been
lost, please contact your service provider.
Phone code error.
Three wrong entries.
Contact Siemens Service (page 127).
Contact your service provider.
Service provider
Code failure.
No authorization for this service.
Too few/too many
menu entries.
deleted by the service provider via
the SIM card.
No fax possible.
Wrong settings in the PC.
Check settings (page 99).
No authorization for this service.
Charge pulse is not transmitted.
Contact your service provider.
Contact your service provider.
Charge meter does
not work.
Damage
Severe shock.
Remove battery and SIM and re-insert them. Do not dismantle the phone!
connector contacts thoroughly. Stand mobile upright in an air current. Do not dis-
mantle the phone!
Reset all settings to factory default (see also page 92): # 9 9 9 9 # A
*
127
Customer Care
r
Simple, straightforward support for technical and operational queries is available from our
"Questions & Answers" section, page 124.
If repair work is necessary please contact one of our service centres. In some countries repair
and replace services are impossible where the products are not sold through our authorised
dealers.
Abu Dhabi.........................................0 26 42 38 00
Argentina .....................................0 80 08 88 98 78
Australia..........................................13 00 66 53 66
Austria.............................................05 17 07 50 04
Bahrain .....................................................40 42 34
Bangladesh.......................................0 17 52 74 47
Belgium.............................................0 78 15 22 21
Bolivia ...............................................0 21 21 41 14
Bosnia Herzegovina..........................0 33 27 66 49
Brazil............................................0 80 07 07 12 48
Brunei ..................................................02 43 08 01
Bulgaria................................................02 73 94 88
Cambodia ............................................12 80 05 00
Canada ........................................1 88 87 77 02 11
China ...........................................0 21 50 31 81 49
Croatia ..............................................0 16 10 53 81
Czech Republic...............................02 33 03 27 27
Denmark ..............................................35 25 86 00
Dubai ................................................0 43 96 64 33
Egypt.................................................0 23 33 41 11
Estonia.................................................06 30 47 97
Finland............................................09 22 94 37 00
France.............................................01 56 38 42 00
Germany *....................................0 18 05 33 32 26
Greece.........................................0 80 11 11 11 16
Hong Kong...........................................28 61 11 18
Hungary ..........................................06 14 71 24 44
Iceland ...................................................5 11 30 00
India.............................22 24 98 70 00 Extn: 70 40
Indonesia .....................................0 21 46 82 60 81
Ireland.............................................18 50 77 72 77
Italy.................................................02 66 76 44 00
Ivory Coast...........................................05 02 02 59
Jordan...............................................0 64 39 86 42
Kenya.....................................................2 72 37 17
Kuwait....................................................2 45 41 78
Latvia .....................................................7 50 11 18
Lebanon...............................................01 44 30 43
Libya ...............................................02 13 50 28 82
Lithuania ...........................................8 52 74 20 10
Luxembourg........................................ 43 84 33 99
Macedonia ...........................................02 13 14 84
Malaysia....................................+ 6 03 77 12 43 04
Malta.......................................+ 35 32 14 94 06 32
Mauritius ................................................2 11 62 13
Mexico .......................................01 80 07 11 00 03
Morocco...............................................22 66 92 09
Netherlands .................................0 90 03 33 31 00
New Zealand...................................08 00 27 43 63
Nigeria ..............................................0 14 50 05 00
Norway.................................................22 70 84 00
Oman....................................................... 79 10 12
Pakistan..........................................02 15 66 22 00
Paraguay ..........................................8 00 10 20 04
Philippines ........................................0 27 57 11 18
Poland.............................................08 01 30 00 30
Portugal ............................................8 08 20 15 21
Qatar....................................................04 32 20 10
Romania .........................................02 12 04 60 00
Russia..........................................8 80 02 00 10 10
Saudi Arabia .....................................0 22 26 00 43
Serbia .............................................01 13 22 84 85
Singapore ............................................62 27 11 18
Slovak Republic ..............................02 59 68 22 66
Slovenia............................................0 14 74 63 36
South Africa ....................................08 60 10 11 57
Spain.................................................9 02 11 50 61
Sweden.............................................0 87 50 99 11
Switzerland .....................................08 48 21 20 00
Taiwan ............................................02 23 96 10 06
Thailand............................................0 22 68 11 18
Tunisia .................................................71 86 19 02
Turkey..........................................0 21 65 79 71 00
Ukraine ........................................8 80 05 01 00 00
United Arab Emirates........................0 43 31 95 78
United Kingdom ...........................0 87 05 33 44 11
USA .............................................1 88 87 77 02 11
Vietnam................................................45 63 22 44
128
Customer Care
Zimbabwe ............................................04 36 94 24
Note
When calling customer service, please
have ready your receipt and the phone
identity number (IMEI, to display press
#06#), the software version (to display
*
press #06#, then §Info§) and if available,
*
your Siemens Service customer number.
129
Accessories
ries
Basics
Li-Ion Battery 700mAh EBA-510
Data/Applications
Data Cable DCA-500
L36880-N5601-A100
L36880-N5601-A110
Spare battery.
For connecting the phone to the serial
RS232 port of the PC.
Travel Charger
ETC-500 (Euro): L36880-N5601-A104
ETC-510 (UK): L36880-N5601-A105
Travel charger with an extended input volt-
age range of 100-240V.
Data Cable USB DCA-510
L36880-N5601-A111
For connecting the phone to the USB port of
the PC. With load function.
SyncStation DSC-500
L36880-N5601-A103
Desk Top Charger EDC-510
L36880-N4501-A101
Table cradle for your mobile phone. Allows
data exchange and simultaneously charges
the phone via the power supply unit. Fea-
tures a desktop charger, a data cable (USB)
and a Y adapter.
The desktop charger enables convenient
charging of the mobile phone and an addi-
tional battery.
Headset PTT HHS-510
L36880-N5601-A108
Headset with PTT key to activate voice rec-
ognition and to accept and end calls.
Innovations
QuickPic Camera IQP-500
Carry Set FCS-510
L36880-N5601-A119
Includes a belt clip and a retaining clip for
discreetly fastening the mobile phone on
clothes or in a bag.
L36880-N5701-A109
Camera that plugs into the mobile phone. Al-
lows you to take photos and send them via
the mobile phone to other mobile phones us-
ing MMS or via email to a PC. Integrated
flashlight that can be switched on or off as
required.
Carrying Cases
A range of carrying cases is available at spe-
cialty shops or you can visit the Siemens Mo-
bile Store online:
Headset PTT Bluetooth™ HHB-500
L36880-N5701-A107
Smart and convenient headset with no
cable to get in the way. Can be used on any
phone that supports the Bluetooth™ head-
set profile.
Original Siemens Accessories
130
Accessories
Car Kit Professional Voice
Car Solutions
HKV-510 (English): L36880-N5701-A102
HKV-520 (French): L36880-N5701-A103
HKV-500 (German): L36880-N5701-A101
Handsfree kit with voice recognition, capaci-
ty for more than 150 names. Electronics box
with connection for fax and e-mail transmis-
sion via your notebook. Includes all compo-
nents needed for installation. An individual
antenna solution can be obtained from your
specialist dealer.
Car Charger ECC-500
L36880-N5601-A106
Charger for the cigarette lighter socket in the
car.
Car Kit Portable HKP-500
L36880-N5601-A109
Handsfree kit with integrated loudspeaker
and microphone and auto answer feature.
Simply plug into the cigarette lighter socket.
Ideal for easy transfer between vehicles.
Car Kit Upgrade HKO-500
L36880-N5701-A104
Mobile Holder for upgrading your handsfree
Car Kit Comfort and Car Kit Voice I.
Mobile Holder HMH-500
L36880-N5601-A116
Cradle without antenna port.
Mobile Holder Antenna HMH-510
L36880-N5601-A117
Mobile holder for connecting an external an-
tenna. Ideal in combination with Headset
PTT or Car Kit Portable.
Car Kit Upgrade HKO-510
L36880-N5701-A105
Mobile Holder for upgrading your handsfree
Car Kit Voice II.
Optional Car Kit accessories
Car Handset HKO-550:
L36880-N3015-A123
VDA Adapter Cable HKO-560:
L36880-N4001-A121
Car Data Adapter HKO-530:
L36880-N5701-A108
Push To Talk Key HKO-520:
L36880-N4501-A135
Basic Car Pack HKB-500
L36880-N5601-A118
Allows in-car charging of your mobile phone
as well as handsfree talking. Contains a Car
Charger, a Headset PTT and a Y adapter.
Car Kit Comfort HKC-501
L36880-N5701-A100
Handsfree kit with first-class digital call qual-
ity and supreme ease of use. Includes all
components needed for installation. An indi-
vidual antenna solution can be obtained
from your specialist dealer.
Products can be obtained in specialty shops
or you can visit the Siemens Mobile Store
online:
Original Siemens Accessories
131
Specifications
a-
The design of your phone complies
Exposure to
with the FCC guidelines (and those
standards). For additional informa-
tion concerning exposure to radio
frequency signal, see the statement
by the FDA at the end of this user
guide.
radiofrequency signals
Your wireless handheld portable
telephone is a low power radio trans-
mitter and receiver. When it is ON, it
receives and also sends out radiofre-
quency (RF) signals.
Technical data
In August 1996, The Federal Com-
munications Commission (FCC)
adopted RF exposure guidelines with
safety levels for hand-held wireless
phones. Those guidelines are consis-
tent with the safety standards previ-
ously set by both U.S. and interna-
tional standards bodies:
GSM class:
4 (33 dBm - 850 MHz)
1 (30 dBm -
1.900 MHz)
BlueTooth™ class: 2 (1 mW)
Frequency range: 824 - 894 MHz
1.850 - 1.990 MHz
• American National Standards In-
stitute (ANSI) C95.1 (1992)
2.402-2.4835 GHz
• National Council of Radiation Pro-
tection and Measurement (NCRP)
Report 86 (1986)
Weight:
83 g / 2.96 oz.
Dimensions:
101x44/41x21 mm
(69 ccm)
• International Commission of Non-
Ionizing Radiation Protection (IC-
NIRP) 1996
LiIon battery:
700 mAh
Operating temper- 14 °F to 131 °F
ature:
• Ministry of Health (Canada) Safety
Code 6
SIM card:
plug-in 3 V / 1.8 V
up to 300 hours
up to 6 hours
Those standards were based on com-
prehensive and periodic evaluations
of the relevant scientific literature.
For example, over 120 scientists, en-
gineers, and physicians from univer-
sities, government health agencies,
and industry reviewed the available
body of research to develop the ANSI
standard (C95.1).
Standby Time:
Talk Time:
Trademarks
CPS is a trademark of Cambridge
Positioning Systems Limited.
132
Maintenance
nce Maintenance tips
• The SIM card should be treated
with the same care as a cheque
guarantee card. Do not bend or
scratch it or expose it to static
electricity.
• Clean the card with a damp cloth
or an antistatic wipe without
chemical cleaning agents.
• Protect the phone from moisture
and shocks. Do not expose your
phone to direct sunlight.
• Remove the battery if you are not
going to use the phone for ex-
tended periods of time (more than
one month).
Phone ID
You will need the following details if you
lose your phone or SIM card. Please enter
here
the number of the SIM card (on the card):
..............................................................
15-digit serial number of the phone (under
the battery):
..............................................................
Customer Service number of the service
provider:
..............................................................
Lost phone
If you lose your phone or SIM card contact
your service provider immediately to pre-
vent misuse.
133
U.S. FDA
been done to address these ques-
tions, no clear picture of the biologi-
cal effects of this type of radiation
has emerged to date. Thus, the avail-
able science does not allow us to
conclude that mobile phones are ab-
solutely safe, or that they are unsafe.
However, the available scientific evi-
dence does not demonstrate ad-
verse health effects associated with
the use of mobile phones.
The U.S. Food and Drug
Administration's (FDA) Center
for Devices and Radiological
Health Consumer Update on
Mobile Phones
FDA has been receiving inquiries
about the safety of mobile phones,
including cellular phones and PCS
phones. The following summarizes
what is know — and what remains
unknown — about whether these
products can pose a hazard to
health, and what can be done to
minimize any potential risk. This in-
formation may be used to respond
to questions.
What kinds of phones are in question?
Questions have been raised about
hand-held mobile phones, the kind
that have a built-in antenna that is
positioned close to the user's head
during normal telephone conversa-
tion. These types of mobile phones
are of concern because of the short
distance between the phone's an-
tenna — the primary source of the
RF — and the person's head. The ex-
posure to RF from mobile phones in
which the antenna is located at
greater distances from the user (on
the outside of a car, for example) is
drastically lower than that from
hand-held phones, because a per-
son's RF exposure decreases rapidly
with distance from the source. The
safety of so-called “cordless phones,”
which have a base unit connected to
the telephone wiring in a house and
which operate at far lower power
levels and frequencies, has not been
questioned.
Why the concern?
Mobile phones emit low levels of ra-
dio frequency energy (i.e., radio fre-
quency radiation) in the microwave
range while being used. They also
emit very low levels of radio frequen-
cy energy (RF), considered non-sig-
nificant, when in the stand-by mode.
It is well known that high levels of RF
can produce biological damage
through heating effects (this is how
your microwave oven is able to cook
food). However, it is not known
whether, to what extent, or through
what mechanism, lower levels of RF
might cause adverse health effects
as well. Although some research has
134
U.S. FDA
How much evidence is there that hand-
held mobile phones might be harmful?
ty of mobile phones. This research
has resulted in two findings in partic-
ular that merit additional study:
Briefly, there is not enough evidence
to know for sure, either way; howev-
er, research efforts are on-going.
The existing scientific evidence is
conflicting and many of the studies
that have been done to date have
suffered from flaws in their research
methods. Animal experiments inves-
tigating the effects of RF exposures
characteristic of mobile phones have
yielded conflicting results. A few ani-
mal studies, however, have suggest-
ed that low levels of RF could accel-
erate the development of cancer in
laboratory animals. In one study,
mice genetically altered to be predis-
posed to developing one type of can-
cer developed more than twice as
many such cancers when they were
exposed to RF energy compared to
controls. There is much uncertainty
among scientists about whether re-
sults obtained from animal studies
apply to the use of mobile phones.
First, it is uncertain how to apply the
results obtained in rats and mice to
humans. Second, many of the stud-
ies showed increased tumor devel-
opment used animals that had al-
ready been treated with cancer-
causing chemicals, and other studies
exposed the animals to the RF virtu-
ally continuously — up to 22 hours
per day.
1. In a hospital-based, case-control
study, researchers looked for an as-
sociation between mobile phone use
and either glioma (a type of brain
cancer) or acoustic neuroma (a be-
nign tumor of the nerve sheath). No
statistically significant association
was found between mobile phone
use and acoustic neuroma. There
was also no association between
mobile phone use and gliomas when
all types of gliomas were considered
together. It should be noted that the
average length of mobile phone ex-
posure in this study was less than
three years.
When 20 types of glioma were con-
sidered separately, however, an as-
sociation was found between mobile
phone use and one rare type of glio-
ma, neuroepithelliomatous tumors.
It is possible with multiple compari-
sons of the same sample that this as-
sociation occurred by chance. More-
over, the risk did not increase with
how often the mobile phone was
used, or the length of the calls. In
fact, the risk actually decreased with
cumulative hours of mobile phone
use. Most cancer causing agents in-
crease risk with increased exposure.
An ongoing study of brain cancers by
the National Cancer Institute is ex-
pected to bear on the accuracy and
repeatability of these results.1
For the past five years in the United
States, the mobile phone industry
has supported research into the safe-
135
U.S. FDA
2. Researchers conducted a large
Two other studies of interest have
been reported recently in the litera-
ture:
battery of laboratory tests to assess
the effects of exposure to mobile
phone RF on genetic material. These
included tests for several kinds of ab-
normalities, including mutations,
chromosomal aberrations, DNA
strand breaks, and structural chang-
es in the genetic material of blood
cells called lymphocytes. None of
the tests showed any effect of the RF
except for the micronucleus assay,
which detects structural effects on
the genetic material. The cells in this
assay showed changes after expo-
sure to simulated cell phone radia-
tion, but only after 24 hours of expo-
sure. It is possible that exposing the
test cells to radiation for this long re-
sulted in heating. Since this assay is
known to be sensitive to heating,
heat alone could have caused the ab-
normalities to occur. The data al-
ready in the literature on the re-
sponse of the micronucleus assay to
RF are conflicting. Thus follow-up re-
search is necessary. 2
• Two groups of 18 people were ex-
posed to simulated mobile phone
signals under laboratory condi-
tions while they performed cogni-
tive function tests. There were no
changes in the subjects' ability to
recall words, numbers, or pic-
tures, or in their spatial memory,
but they were able to make choic-
es more quickly in one visual test
when they were exposed to simu-
lated mobile phone signals. This
was the only change noted among
more than 20 variables com-
pared.3
• In a study of 209 brain tumor cas-
es and 425 matched controls,
there was no increased risk of
brain tumors associated with mo-
bile phone use. When tumors did
exist in certain locations, howev-
er, they were more likely to be on
the side of the head where the
mobile phone was used. Because
this occurred in only a small num-
ber of cases, the increased likeli-
hood was too small to be
FDA is currently working with gov-
ernment, industry, and academic
groups to ensure the proper follow-
up to these industry-funded research
findings. Collaboration with the Cel-
lular Telecommunications Industry
Association (CTIA) in particular is ex-
pected to lead to FDA providing re-
search recommendations and scien-
tific oversight of new CTIA-funded
research based on such recommen-
dations.
statistically significant.4
In summary, we do not have enough
information at this point to assure
the public that there are, or are not,
any low incident health problems as-
sociated with use of mobile phones.
FDA continues to work with all par-
ties, including other federal agencies
136
U.S. FDA
and industry, to assure that research
is undertaken to provide the neces-
sary answers to the outstanding
questions about the safety of mobile
phones.
called a case-control study. The cur-
rent case-control study of brain can-
cers by the National Cancer Institute,
as well as the follow-up research to
be sponsored by industry, will begin
to generate this type of information.
What is known about cases of human
cancer that have been reported in users
of hand-held mobile phones?
What is FDA's role concerning the safety
of mobile phones?
Some people who have used mobile
phones have been diagnosed with
brain cancer. But it is important to
understand that this type of cancer
also occurs among people who have
not used mobile phones. In fact,
brain cancer occurs in the U.S. popu-
lation at a rate of about 6 new cases
per 100,000 people each year. At
that rate, assuming 80 million users
of mobile phones (a number increas-
ing at a rate of about 1 million per
month), about 4800 cases of brain
cancer would be expected each year
among those 80 million people,
whether or not they used their
Under the law, FDA does not review
the safety of radiation emitting con-
sumer products such as mobile
phones before marketing, as it does
with new drugs or medical devices.
However, the agency has authority
to take action if mobile phones are
shown to emit radiation at a level
that is hazardous to the user. In such
a case, FDA could require the manu-
facturers of mobile phones to notify
users of the health hazard and to re-
pair, replace or recall the phones so
that the hazard no longer exists.
Although the existing scientific data
do not justify FDA regulatory actions
at this time, FDA has urged the mo-
bile phone industry to take a number
of steps to assure public safety. The
agency has recommended that the
industry:
phones. Thus it is not possible to tell
whether any individual's cancer
arose because of the phone, or
whether it would have happened
anyway. A key question is whether
the risk of getting a particular form
of cancer is greater among people
who use mobile phones than among
the rest of the population. One way
to answer that question is to com-
pare the usage of mobile phones
among people with brain cancer
with the use of mobile phones
• Support needed research into pos-
sible biological effects of RF of the
type emitted by mobile phones;
• Design mobile phones in a way
that minimizes any RF exposure to
the user that is not necessary for
device function; and
among appropriately matched peo-
ple without brain cancer. This is
137
U.S. FDA
• Cooperate in providing mobile
phone users with the best possible
information on what is known
about possible effects of mobile
phone use on human health.
hand-held mobile phones could con-
sider holding lengthy conversations
on conventional phones and reserv-
ing the hand-held models for shorter
conversations or for situations when
other types of phones are not avail-
able.
At the same time, FDA belongs to an
interagency working group of the
federal agencies that have responsi-
bility for different aspects of mobile
phone safety to ensure a coordinat-
ed effort at the federal level. These
agencies are:
People who must conduct extended
conversations in their cars every day
could switch to a type of mobile
phone that places more distance be-
tween their bodies and the source of
the RF, since the exposure level
• National Institute for Occupation-
al Safety and Health
drops off dramatically with distance.
For example, they could switch to:
• Environmental Protection Agency
• a mobile phone in which the an-
tenna is located outside the vehi-
cle,
• Federal Communications Com-
mission
• Occupational Health and Safety
Administration
• a hand-held phone with a built-in
antenna connected to a different
antenna mounted on the outside
of the car or built into a separate
package, or
• NationalTelecommunicationsand
Information Administration
The National Institutes of Health also
participates in this group.
• a headset with a remote antenna
to a mobile phone carried at the
waist.
In the absence of conclusive information
about any possible risk, what can con-
cerned individuals do?
Where can I find additional information?
For additional information, see the
following websites:
If there is a risk from these products
— and at this point we do not know
that there is — it is probably very
small. But if people are concerned
about avoiding even potential risks,
there are simple steps they can take
to do so. For example, time is a key
factor in how much exposure a per-
son receives. Those persons who
spend long periods of time on their
• Federal Communications Com-
mission (FCC) RF Safety Program
(select “Information on Human Ex-
posure to RF Fields from Cellular
and PCS Radio Transmitters”):
http://www.fcc.gov/oet/rfsafety.
138
U.S. FDA
• World Health Organization (WHO)
International Commission on
Non-Ionizing Radiation Protection
(select Qs & As):
http://www.who.int/emf
• United Kingdom, National Radio-
logical Protection Board:
http://www.nrpb.org.uk
• Cellular Telecommunications In-
dustry Association (CTIA):
http://www.wow-com.com
• U.S. Food and Drug Administra-
tion (FDA) Center for devices and
Radiological Health:
http://www.fda.gov/cdhr/
consumer/
1 Muscat et al. Epidemiological Study of Cel-
lular Telephone Use and Malignant Brain
Tumors. In: State of the Science Sympo-
sium; 1999 June 20; Long Beach, California.
2 Tice et al. Tests of mobile phone signals for
activity in genotoxicity and other laboratory
assays. In: Annual Meeting of the Environ-
mental Mutagen Society; March 29, 1999,
Washington, DC; and personal communica-
tion, unpublished results.
3 Preece, AW, Iwi, G, Davies-Smith, A,
Wesnes, K, Butler, S, Lim, E, and Varey, A.
Effect of a 915- MHz simulated mobile
phone signal on cognitive function in man.
Int. J. Radiat. Biol., April 8, 1999.
4 Hardell, L, Nasman, A, Pahlson, A,
Hallquist, A and Mild, KH. Use of cellular
telephones and the risk for brain tumors; a
case-control study. Int. J. Oncol, 15: 113-
116, 1999.
139
FCC/Industry Canada Notice
ustry Your phone may cause TV or radio in-
terference (for example, when using
a telephone in close proximity to re-
ceiving equipment). The FCC or In-
dustry Canada can require you to
stop using your telephone if such in-
terference cannot be eliminated. If
you require assistance, please con-
tact your local service facility.
This device complies with part 15 of
the FCC rules. Operation is subject
to the condition that this device
does not cause harmful interfer-
ence.
140
Ten Driving Safety Tips
ng
ps
When available, use a hands-free device.
A number of hands-free wireless
phone accessories are readily avail-
able today. Whether you choose an
installed mounted device for your
phone or a speaker phone accessory,
take advantage of these devices if
they are available to you.
Your Siemens wireless phone gives
you the power to communicate by
voice — almost anywhere, anytime.
But an important responsibility ac-
companies the benefits of wireless
phones, one that every user must
uphold.
Position your phone within easy reach.
Make sure you place your wireless
phone within easy reach and where
you can grab it without removing
your eyes from the road. If you get
an incoming call at an inconvenient
time, let your voice mail answer it for
you.
When driving a car, driving is your
first responsibility. When using your
wireless phone behind the wheel of
a car, practice good common sense
and remember the following tips:
Suspend conversations during hazard-
ous driving conditions or situations.
Let the person you are speaking to
know you are driving; if necessary,
suspend the call in heavy traffic or
hazardous weather conditions. Rain,
sleet, snow and ice can be hazard-
ous, but so is heavy traffic. As a driv-
er, your first responsibility is to pay
attention to the road.
Get to know your phone and its features
such as speed dial and redial.
Carefully read your instruction man-
ual and learn to take advantage of
valuable features most phones offer
including, automatic redial and
memory dial — most phones can
store up to 99 numbers in memory
dial. Also, work to memorize the
phone keypad so you can use the
speed dial function without taking
your attention off the road.
Do not take notes or look up phone num-
bers while driving.
If you are reading an address book or
business card while driving a car, or
writing a “to do” list, then you are not
watching where you are going. It’s
common sense. Don’t get caught in a
dangerous situation because you are
reading or writing and not paying at-
tention to the road or nearby vehi-
cles.
141
Ten Driving Safety Tips
Dial sensibly and assess the traffic.
Use your phone to help others in emer-
gencies.
If possible, place calls when you are
not moving or before pulling into
traffic. Try to plan your calls before
you begin your trip, or attempt to co-
incide your calls with times you may
be stopped at a stop sign, red light or
otherwise stationary. But if you need
to dial while driving, follow this sim-
ple tip — dial only a few numbers,
check the road and your mirrors,
then continue.
Your wireless phone provides you a
perfect opportunity to be a “good
Samaritan” in your community. If
you see an auto accident, crime in
progress or other serious emergen-
cies where lives are in danger, call 9-
1-1, as you would want others to do
for you.
Call roadside assistance or a special
wireless non-emergency assistance
number when necessary.
Do not engage in stressful or emotional
conversations that may be distracting.
Certain situations you encounter
while driving may require attention,
but are not urgent enough to merit a
call to 9-1-1. But you can still use
your wireless phone to lend a hand.
If you see a broken-down vehicle
posing no serious hazard, a broken
traffic signal, a minor traffic accident
where no one appears injured, or a
vehicle you know to be stolen, call
roadside assistance or other special
non-emergency wireless numbers.
Stressful or emotional conversations
and driving do not mix — they are
distracting and even dangerous
when you are behind the wheel.
Make people you are talking with
aware you are driving and if neces-
sary, suspend phone conversations
that have the potential to divert your
attention from the road.
Use your phone to call for help.
Your wireless phone is one of the
greatest tools you can own to pro-
tect yourself and your family in dan-
gerous situations — with your
phone at your side, help is only three
numbers away. Dial 9-1-1 in the case
of fire, traffic accident, road hazard,
or medical emergency. Remember, it
is a free call on your wireless phone.
“The wireless industry reminds you to
use your phone safely when driving.”
For more information, please call
1 (888) 901-SAFE, or visit our Web site
at: www.wow-com.com
Provided by the Cellular Telecommunica-
tions Industry Association (CTIA)
142
Intellectual Property
ual
apparatus or devices not furnished
by Siemens, nor will Siemens have
any liability for the use of ancillary
equipment or software not fur-
nished by Siemens which is attached
to or used in connection with the
Product, The foregoing states the en-
tire liability of Siemens with respect
to infringement of patents by the
Product or any parts thereof.
Intellectual Property Restrictions
All Intellectual Property, as defined
below, which is owned by or other-
wise the property of Siemens Infor-
mation and Communications Mo-
bile, LLC (“Siemens”), its affiliates,
partners or suppliers, relating to the
Phone, including but not limited to
accessories, parts or software relat-
ing thereto (the “Phone System”), is
proprietary under federal laws, state
laws and International treaty provi-
sions. Intellectual Property includes,
but is not limited to, inventions (pat-
entable or unpatentable), patents,
trade secrets, copyrights, software,
computer programs, and related
documentation and other works of
authorship. You may not infringe or
otherwise violate the rights secured
by the Intellectual Property. More-
over, you agree that you will not
(and will not attempt to) disassem-
ble, decompile, reverse engineer,
prepare derivative works from, mod-
ify or make any other effort to create
source code from the software. No
title to ownership in the Intellectual
Property is transferred to you
Laws in the United States and other
countries preserve for Siemens cer-
tain exclusive rights for copyrighted
Siemens software, such as the exclu-
sive rights to reproduce and distrib-
ute copies of such Siemens software.
Siemens software may be used only
in the Product in which the software
was originally embodied when pur-
chased, and such software in such
Product may not be replaced, cop-
ied, distributed. modified in any
way, or used to produce any deriva-
tive thereof. No other use including,
without limitation, alteration, modi-
fication, reproduction, distribution.
or reverse engineering of such Sie-
mens software or exercise of rights
in such Siemens software is permit-
ted. No license is granted by implica-
tion, estoppel or otherwise under Si-
emens patent rights or copyrights.
through purchase or possession of
the Phone or its components. All ap-
plicable rights of the Intellectual
Property shall remain with Siemens,
its affiliates, partners or suppliers.
Siemens will have no liability with re-
spect to any claim of patent infringe-
ment which is based upon the com-
bination of the Product or parts
furnished hereunder with software,
A
Addressbook
type...............................................39
All calls (diversion)..........................91
Archive (SMS)..................................48
Auto display
Camera............................................. 76
CB..................................................64
Time/costs....................................34
Car Kit
B
Close-down animation................... 87
Color scheme .................................. 86
Command (voice control).............. 78
Battery
insert .............................................. 9
Birthday
Addressbook................................29
calendar .......................................37
144
CSD .........................................114, 115
EMS ................................................ 115
D
Driving safety ................................140
DTMF tones (tone code) .............. 114
Duration/costs ................................. 34
GPRS
Headset
Home network .............................. 102
Hotline Siemens............................ 127
HTTP ............................................... 116
E
E-mail
receive.......................................... 56
write .............................................55
Emergency number ......................115
I
MMS
Muting (microphone) .................... 22
Identity number (IMEI)...................93
Inbox
Input language (T9)...................... 110
J
N
K
Network
Key lock............................................ 90
L
Last 10 only ...................................100
O
Only ,
M
Mailbox.............................................63
Menu
Phone (settings) ............................. 90
Phone barring ............................... 100
Phone code...................................... 15
Phone identity number. (IMEI) ..... 93
control.......................................... 13
My menu...................................... 83
Speed dialing............................. 118
Message
146
Index
Phone number transfer on/off....... 90
Phone switches off
Phonebook
SIM card
call ................................................26
PIN
POP3 ................................................. 61
Prefix................................................. 18
Profiles
WAP ..............................................67
PUK, PUK2........................................ 15
problems ........................... 119, 124
Q
R
T9 input ..................................... 110
to group....................................... 46
Remote synchronization ................ 79
Ringtones.........................................89
S
Safety precautions ............................3
profiles......................................... 71
Start menu (WAP) ........................... 65
Stopwatch........................................ 75
Switch off phone
WAP
Welcome text .................................. 87
manual.........................................11
Switch on .........................................11
X
T
T9
Text message (SMS) .......................44
U
Unanswered calls............................91
Upper and lower cases .................109
User group .....................................103
V
Validity
|