Siemens EMOTY CX70 User Manual

mobile

Issued by

Information and Communication mobile

Haidenauplatz 1

D-81667 Munich

Rights of modification reserved.

Siemens Aktiengesellschaft

www.siemens-mobile.com

Designed for life

CX70

CXT70

CXV70

Table of Contents

Con-

Safety precautions ..................... 3

Telephone list (schematic) ......... 5

Display symbols ......................... 7

Getting started ........................... 9

Inserting the SIM card/

Phonebook ...............................35

Ne w entry ..............................3 5

Call (search for an entry) ........3 6

Change entry .........................3 6

<Special books> .....................3 7

Call records ...............................38

Durat/charges ...........................39

Camera .....................................4 0

Photo mode ...........................4 0

Video mode ............................41

Inbox ........................................4 2

SMS ...........................................4 3

Write/send ..............................4 3

Read .......................................45

Setting ...................................47

MMS .........................................4 9

Create ...................................4 9

Templates ..............................5 1

Sending an MMS ....................5 2

Receiving an MMS ..................5 3

Reading an MMS ....................54

Se tting ...................................5 5

E-mail ........................................5 7

Write ......................................5 7

Receive/read ...........................58

Se tting ...................................5 9

battery ..................................... 9

Charging the battery .............. 10

Changing CLIPIt™ covers ........ 11

Switching phone on and off/

entering PIN ............................. 12

Enter PIN ............................... 12

Emergency number (SOS) ....... 12

General instructions ................ 13

Standby mode ....................... 13

Signal strength ...................... 13

Digital Rights Mgmt. (DRM) ..... 13

Main menu ............................ 13

Standard functions .................. 15

Highlighting mode ................. 16

Menu speed dialling ............... 16

Security .................................... 17

Codes .................................... 17

Preventing accidental

end

activation ............................... 18

Text entry ................................. 19

Calling ...................................... 23

My phone ................................. 29

Default book ............................ 30

Addressbook ............................ 31

New entry .............................. 31

Change entry ......................... 33

Dialling an entry .................... 33

Groups ................................... 34

Inst. message ...........................61

St art menu .............................6 1

Contact lists ...........................6 2

Start chat ...............................65

Msg. history ...........................66

Setting ...................................66

See also Index at the end of this User Guide

Table of Contents

Voice message/mailbox ........... 68

CB services ............................... 69

Surf & fun ................................. 70

Internet ................................ 70

Bookmarks ............................. 72

Emoty .................................... 72

Games and Applications ......... 73

Downl. assist. ......................... 73

Setup ........................................ 75

Profiles .................................. 75

Themes .................................. 77

Dynamic light ........................ 78

Display ................................... 79

Ringtones .............................. 81

Phone Pilot ............................ 83

Call setup ............................... 84

Phone setup ........................... 86

Clock ..................................... 88

Connectivity .......................... 89

Security ................................. 93

Network ................................ 95

Accessories ............................ 97

My menu .................................. 98

Fast access key ......................... 99

Organiser ............................... 101

Calendar .............................. 101

Appointments ...................... 102

Tasks ................................... 103

Notes ................................... 104

Missed appts. ....................... 104

Dictat.machine .................... 105

Time zones .......................... 106

Extras ......................................107

Walky Talky ..........................1 07

SIM services (optional) .........1 12

Alarm clock ..........................112

Sound recorder .....................113

Calculator .............................1 14

Unit converter ......................1 15

Stopwatch ............................1 16

Countdown ..........................1 16

Remote synchronisation .......1 17

Device manag. .....................1 18

Media player ...........................1 20

My stuff ..................................1 21

Mobile Phone Manager ..........1 23

Questions & Answers .............1 25

Customer Care ........................1 28

Care and maintenance ...........1 30

Product data ...........................1 31

Quality ....................................1 32

Accessories .............................133

Guarant ee certificate (UK) .......1 35

Guarantee certificate (IRL) .......136

SAR – European Union

(RTTE) .....................................1 38

SAR – International

(ICNIRP) ..................................139

Menu tree ...............................140

Index .......................................146

See also Index at the end of this User Guide

Safety precautions

Information for parents

Please read the operating instructions and safety precautions carefully before use.

Explain the content to your children and the hazards associated with using the phone.

Remember to comply with

legal requirements and local re-

strictions when using the

phone. For example, in aero-

planes, petrol stations, hospi-

tals or while driving.

Only use original Siemens bat-

teries (100 % mercury-free) and

charging devices. Otherwise

you risk serious damage to

health and property. The battery

could explode, for instance.

Mobile phones can interfere

with the functioning of medical

devices such as hearing aids

or pacemakers. Keep at least

20 cm between phone and

pacemaker. When using the

mobile phone hold it to the ear

which is further away from the

pacemaker. Fo r more informa-

tion consult your doctor.

Do not use an optical magnifier

to look at the activated infrared

interface [Class 1 LED product

(classification as per

IEC 60825-1)].

Small parts such as the

SIM card, sealing stop, lens ring

and lens cap can be dismantled

and swallowed by small chil-

dren. The phone must therefore

be stored out of the reach of

small children.

Ringtones (p. 81), info tones

(p. 86) and handsfree (p. 25)

talking are reproduced through

the loudspeaker. Do not hold

the phone to the ear when it

rings or when you have

switched on the handsfree func-

tion. Otherwise you risk serious

permanent damage to your

hearing.

The mains voltage specified on

the power supply unit (V) must

not be exceeded. Otherwise

the charging device may be

destroyed.

Do not open the phone. Only re-

placing the battery or SIM card

is permissible. You must not

open the battery under any cir-

cumstances. Any other chang-

es to this device are strictly

prohibited and will invalidate the

operating licence.

Safety precautions

Important

Please dispose of unwanted

batteries and phones as permit-

ted by the laws in your country.

The phone may cause interfer-

ence in the vicinity of TV sets,

radios and PCs.

Use only Siemens original ac-

cessories. This will avoid poten-

tial risks to health or property

and ensure compliance with all

relevant regulations.

Improper use will invalidate the guarantee!

These safety instructions also apply to

Siemens original accessories.

Improved data transmission

In order for your phone to be able to trans-

mit data at higher speeds, it is necessary to

have a good connection to the network.

Transmitting data can be delayed by the

process of establishing a connection. To

comply with guidelines on the effects of ra-

dio waves, you should keep the phone a

distance of 22 mm from your body while

transmitting data.

Telephone list (schematic)

A Call key

Dial phone number/name displayed/

highlighted, take calls. Show last phone

numbers dialled in standby mode.

On/Off/End key

• Switched off: Press and hold to

switch on.

Service provider

• During a conversation or in an appli-

cation: press briefly to finish.

• In menus: Press briefly to go back

a level. Press and hold to go back to

standby mode.

• In standby mode: Press and hold to

switch off phone.

01.10.2004 10:10

NewMMS

Joystick

Press the joystick down verti-

cally to start an application or

function (p. 14).

In standby mode:

Open main menu.

Open user profiles.

Soft keys

Open Phonebook/Address-

book.

The current functions of this key are

shown in the bottom line of the display

Inbox open

as §Text§/symbol (e.g.

Start the camera.

5 Additional key for WAP access

In lists, messages and menus:

(if required, and no other default setting

is made).

Scroll up and down.

Back one level.

During a call:

Set volume.

Call options.

Telephone list (schematic)

1 Integrated antenna

Do not obstruct the phone above the

battery cover unnecessarily. This

reduces the signal quality.

LED for Dynamic Light (p. 78)

3 Loudspeaker

4 Display

Service provider

5 Infrared interface (IrDA)

6 Input keys

01.10.2004 10:10

7 * Ringtone

NewMMS

• Press and hold in standby mode:

Switch all audible signals on/off

(except alarm).

• Press and hold on incoming call:

Switch off ringtone for this call only.

Key lock

Press and hold in standby mode:

Switch key lock on/off.

9 Connection socket

For charger, headset, flash, etc.

: Connection for external antenna

Camera lens

Mirror (depending on telephone

model)

Display symbols

Display symbols (selection)

Alarm set

T9Abc

Signal strength

Keypad locked

Charging

Auto answer feature on

Text input with T9

Activated and available

Registered

Battery charge level, e.g. 50 %

Phonebook

Records

Surf & fun

Service supplier portal

Temporarily interrupted

Browser Offline

Organiser

Browser online

Messages

Browser via GPRS online

Browser no network

IrDA activated

Camera

Extras

File management

IrDA transmission

Settings

Events (selection)

All calls are diverted

SMS memory full

Ringing tone off

MMS memory full

Phone memory full

No network access

Missed call

Short ring (beep) only

Ringer only if the caller is stored

in the Phonebook.

Memory assistant

Display symbols

Message symbols (selection)

Camera symbols

Unread

Switches between

photo and video

Ñ Ò

Read

{

Brightness

Draft

Zoom factor

Sent

White balance

Flash connected

MMS not sent

MMS received

MMS read

MMS with DRM contents (p. 13)

E-mail forwarded

E-mail with attachment

Voice mail received

Getting started

Inserting the SIM card/

battery

The service provider supplies you with

a SIM card on which all the important

data for your line is stored. If the SIM

card has been delivered in credit-card

size, snap the smaller segment out

and remove any rough edges.

• Insert the battery sideways into

^{the phone}4, then press it down-

^wards5 until it engages.

Additional information

Please switch off your phone before

removing the battery!

Only 3 V SIM cards are supported. Please

contact your service provider if you have an

older card.

SIM card problems ..........................p. 126

^{• Press the grooved area}1, then

push cover towards the front in the

^{direction indicated by the arrow}2.

• To remove, press the retaining tab

on the side of the battery, then lift

the battery out.

• Place the battery cover, then push

^{it towards the front}6, until it

clicks into place.

• Place the SIM card in front of the

slot with the contact surface fac-

ing downwards. Then press the

^{SIM card slightly to push it in}3

(ensure that the chamfered corner

is in the correct position).

Getting started

reduce the phone’s standby time.

Avoid placing the phone in the sun

or on a heater.

Charging the battery

Call time: 100 to 330 minutes

Stand-by time: 60 to 300 hours

The battery is not fully charged when

delivered. Plug charger cable into the

bottom of the phone, plug power

supply unit into a mains power socket

and charge for at least two hours.

Charge icon not visible

If the battery has been discharged

fully, the charge icon is not immedi-

ately visible when the power supply

is plugged in. It will appear after up

to two hours. In this case the battery

is fully charged after 3 to 4 hours.

As an alternative, the battery can be

charged via the USB port (see

Accessories, p. 133).

Only use the plug-in power supply

included in delivery!

Display while in service

Charge level display during opera-

tion (empty–full):

Display during charging.

Charging time

V W X

A beep sounds when the battery is

nearly empty. The charge level of the

battery is only displayed correctly

after an uninterrupted charging/dis-

charging cycle. You should therefore

not remove the battery unnecessarily

and where possible not finish the

charging process prematurely.

An empty battery is fully charged

after about 2 hours. Charging is only

possible within a temperature range

of +5 °C to 45 °C. If the temperature

rises/falls 5 °C above/below this, the

charge symbol flashes a warning.

The mains voltage specified on the

power supply unit must not be

exceeded.

Additional information

The power supply unit heats up when used

for long periods. This is normal and not

dangerous.

If the battery is removed for longer than

30 seconds, the clock must be reset.

Operating time

The operating time depends upon

the respective conditions of use.

Extreme temperatures considerably

Getting started

Assembling the phone

Remove the old keypad mat and

Changing CLIPIt™

covers

You can use CLIPIt™ covers (accesso-

ries) to adjust the appearance of

your phone according to your per-

sonal taste.

^{insert the new keypad mat}3 into

the faceplate. Take care that it is cor-

rectly positioned.

Please switch the phone off before

changing the keypad mat or face-

plate.

Dismantling the phone

Remove battery cover (see p. 9). To

remove the faceplate, insert the key

into the opening, apply slight

^pressure1 and turn it at the same

^time2 to open the lock.

Insert the phone into the bottom of

the faceplate

and then push it in

carefully until it clicks into position

CLIPit™ Covers

The new keypad has an additional key

beneath the joystick to permit direct access

to the Internet information from the service

provider.

Switching phone on and off/entering PIN

Switching phone on and Switching on your phone

off

for the first time

Press and hold the On/

Off/End key.

Time/date

During commissioning, set the clock

so that it displays the correct time.

You will not have to make this set-

ting again.

Enter PIN

The SIM card can be protected with

a 4 to 8-digit PIN.

Press this key, then select

§Change§.

Enter the PIN using the

number keys. The charac-

First enter the date (day/

month/year), then the

time (24 hours, including

seconds).

ters

appear to

****

ensure nobody can read

your PIN on the display.

Correction with ] .

Press this key. The time

Confirm by pressing the

joystick. Logging on to

the network will take

a few seconds.

and date are updated.

Time zones

Set the time zone you

are in.

Additional information

Change PIN.......................................p. 17

Clear SIM card barring ......................p. 18

Select a city in the desired

time zone .

§Options§ Use Set time zone to save.

Emergency number

(SOS)

Copying SIM addresses

The first time the SIM card is

inserted, the entries on it can be cop-

ied to the Addressbook. Please do not

interrupt this procedure. During this

time, do not accept incoming calls. Fol-

low the instructions in the display.

Only to be used in real emergencies!

By pressing the soft key §SOS§ you can

make an emergency call on any net-

work without a SIM card and without

entering a PIN (not available in all

countries).

You can also copy data from the

SIM card at a later time (p. 36).

General instructions

Standby mode

Main menu

The phone is in standby mode and is

ready for use when the name of the

service provider appears on the

display.

The main menu is displayed graphi-

cally with symbols:

Call up from standby

mode.

Press and hold the On/Off/

Select the application

symbols.

End key to return to

standby mode from any

situation.

Start an application.

Main menu options

Signal strength

§Options§

Open menu.

Strong signal strength.

[

Different functions are available

depending on the context:

A weak signal reduces the

call quality and may lead

to loss of the connection.

Change your location.

Big letters

Selection between two

font sizes.

Illumination

Set display light brighter/

darker.

Digital Rights Mgmt.

(DRM)

Help

Display of a help text.

Remember that your telephone has

digital rights management. The use

of downloaded pictures, sounds or

applications can be restricted by the

suppliers, e.g. copy protection, use

for a limited period of time only,

number of times it can be used etc.

(see also p. 74).

List output of the menu.

Entering letters will ac-

cess a function directly.

General instructions

Symbols

The following symbols are used to

explain operation:

User guide

Menu controls

The steps needed to reach a function

are shown in a condensed form in the

user guide, e. g. to display call list for

missed calls in condensed form:

Enter numbers or

letters.

On/Off/End key.

C ¢ ¢Calls missed

Call key

< >

This comprises the following steps:

Soft keys

Open the main menu.

Displays a soft-key function.

§Menu§

Select , then function

Calls missed.

Press the joystick vertically,

e.g., to call up the menu.

D F E

Confirm.

Press the joystick in the

direction indicated.

Function dependent on

service provider, may

require special registration.

Press joystick

The symbol in the centre of the

lower line of the display shows the

current function when the joystick is

pressed down vertically.

Display menu

Take photos

Zoom

Call, accept call

Standard functions

Option menus

Text input T9 preferred: Activate/

(p. 19)

deactivate T9 input.

Functions which appear repeatedly

in the options menu are listed here.

Input language: Select

language for text.

§Options§ Open menu.

Rename

Capacity

Attributes

Rename selected entry.

Display memory capacity.

Edit

Open the entry to edit.

Display entry.

View

Display properties of the

highlighted object.

Delete/

Delete all

Delete entry/delete all

entries after confirmation.

Help

Display help text.

New entry

Send...

Create new entry.

Selecttransmissionservice

and medium for sending or

printing.

Reply/

Reply to all

The sender becomes the

recipient, "Re." is placed in

front of the subject matter

and the received text is

transferred into the new

message.

Save

Store entry.

Save to 9

Save recipients in the cur-

rent address directory.

Sort

Set sort criteria (alphabeti-

cal, type, time).

Standard functions

Highlighting mode

With some applications (e.g. Phone-

book/Addressbook) one or more

entries in a list can be highlighted to

carry out a function jointly.

Menu speed dialling

All menu functions are numbered

internally. A function may be

selected directly by entering these

numbers in sequence.

§Options§

E.g., write new SMS (from standby

mode):

Open menu.

Mark

Activate highlighting

mode.

Press this key to display

the main menu.

If a non-highlighted entry is selected,

this can be highlighted:

Press this key for

Messages.

§Mark§

The current entry is high-

lighted.

Press this key to

Write message.

If a highlighted entry is selected, the

highlighting can be deleted:

Press this key for SMS.

§Unmark§ Dehighlight the current

entry.

Additional highlighting functions:

Mark all

Highlight all entries.

Unmark all

Delete highlighting on all

marked entries.

Delete

marked

All selected entries are

deleted.

Security

The phone and SIM card are pro-

tected against misuse by several

security codes.

C ¢_¢T_Cod¢_esSecurity

¢Select function.

Keep these confidential numbers in

a safe place where you can access

them again if required.

PIN control

The PIN is usually requested each

time the phone is switched on. You

can deactivate this feature but you

risk unauthorised use of the phone.

Some service providers do not

Codes

Protects your SIM card (per-

sonal identification number).

permit deactivating the control.

§Select§

Press this key.

PIN2

This is needed to set the charge

detail display and to access

additional functions on special

SIM cards.

Enter PIN.

Confirm input.

PUK

PUK2

Key code. Used to unlock

SIM cards after the wrong PIN

has been entered repeatedly.

§Change§ Press this key.

Confirm.

Phone

code

Protects your phone. Must be

entered at the first security

setting.

Change PIN

You can change the PIN to any

4 to 8-digit number you find easier

to remember.

Enter current PIN.

Press this key.

_J_,C

Enter new PIN.

Re-enter new PIN.

Security

C ¢_¢T_Cod¢_esSecurity

¢Select function.

Change PIN2

Preventing accidental

activation

Even if PIN use is deactivated (p. 17)

confirmation is required to switch on

the phone.

(Display only if PIN2 is available).

Proceed as with Change PIN.

This prevents accidental activation

of the phone, e.g. when you are

carrying it in a bag or when you are

travelling in an aircraft.

Chg.phonecode

(Change phone code)

You define the phone code (4–8 dig-

its) when you call up a phone-code

protected function for the first time

(e.g. Direct call, p. 27). It is then valid

for all phone-code protected func-

tions.

Following the third unsuccessful

attempt, access to the phone code

and the functions that use it is

denied. Contact the Siemens Service

(p. 128).

Press down.

Press. The phone switches

on.

§Cancel§

Press or take no action.

The phone does not

switch on.

Connecting to Windows

PCs

You can connect your phone using

IrDA or a data cable (accessories,

p. 133) to a Windows® PC. The

Windows® PC program MPM (Mobile

Phone Manager, p. 123) enables you

to backup data on your Windows®

PC and to synchronise the

Addressbook with Outlook®, Lotus

Notes™ and other Siemens phones

(as well as Gigaset). You can

Clearing SIM card barring

If the PIN is entered incorrectly three

times, the SIM card is barred. Enter

the PUK (MASTER PIN) provided by

your service provider with the

SIM card in accordance with the

instructions. If the PUK (MASTER PIN)

has been lost, please contact your

service provider.

download the Mobile Phone

Manager from the Internet at

www.siemens-mobile.com/cx70

Text entry

Press briefly: Special char-

acters are shown.

Text entry without T9

Press number key repeatedly until

the required letter appears. After a

brief interval the cursor will advance.

Example:

Press and hold: Open input

menu.

Press once/repeatedly:

. , ? ! ’ " 0 + - ( ) @ / : _

Press once briefly to type

the letter a, twice to type

b etc.

Press and hold: Writes 0.

Writes blank. Press twice

= jumps a line.

Press and hold to write the

number.

Ä, ä, 1–9 Umlauts and numbers are

displayed after the rele-

vant letters.

Special characters

Press briefly. The symbols

chart is displayed

Press briefly to delete the

]

letter before the cursor,

press and hold to erase the

whole word.

)

’

;

)

{

(

[

]

}

€

∆

Move the cursor

(forwards/back).

Θ Λ

Press briefly: Swap

between abc, Abc, abc,

Φ Ψ Ω

Abc, ABC, 123. Status

1) Line break

shown in top line of dis-

play.

Navigate to characters.

Confirm.

Press and hold: All input-

variants are displayed.

§Select§

Text entry

§Select§

Confirm, the new lan-

guage is set. Languages

with T9 support are

marked with the

Input menu

With text input:

Press down: The input

T9 symbol.

menu is displayed:

Text format (SMS only)

Input language

Mark

Writing with T9

Since the display changes as you

proceed,

Copy/Insert

it is best if you finish a word without look-

ing at the display.

Simply press the keys once only

where the relevant letter is located.

For "hotel", for example:

Text entry with T9

"T9" deduces the correct word from

the individual key entries by making

comparisons with an extensive dic-

tionary.

Press briefly for ^T9Abc then

4 6 8 3 5

Activate, deactivate T9

§Options§ Open text menu.

Text input Select.

A blank ends a word.

Do not use special characters such as

Ä but rather use the standard charac-

ters, e.g. A; T9 will do the rest for

you.

T9 preferred

Select.

§Change§ Activate T9.

Select input language

Select the language in which you

want to compose your message.

T9 Text Input is licensed under one or more of

the following:

U.S. Pat. Nos. 5,818,437, 5,953,541,

5,187,480, 5,945,928 and 6,011,554;

Canadian Pat. No. 1,331,057;

United Kingdom Pat. No. 2238414B;

Hong Kong Standard Pat. No. HK0940329;

Republic of Singapore Pat. No. 51383;

Euro.Pat. No. 0 842 463 (96927260.8)

DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;

and additional patents are pending worldwide.

§Options§ Open text menu.

Text input Select.

Input language

Select.

Text entry

T9 word suggestions

Correct a word

If several options are found in the

dictionary for a key sequence

(a word), the most probable is dis-

played first. If the word you want has

not been recognised, the next sug-

gestion from T9 may be correct.

Move left or right, word

by word, until the

required word is

§highlighted§.

Scroll through the T9

word suggestions again.

The word must §highlighted§ be dis-

played. Then press

]

Deletes the character to

the left of the cursor and

displays a new possible

word!

again. The displayed word

is replaced with a differ-

ent word. If this word is

also incorrect, press

Additional information

Within a "T9-word", individual letters may

not be edited without first removing the

T9-status. In most cases it is better to

rewrite the complete word.

again. press until the cor-

rect word is displayed.

If the word you want is not in the dic-

tionary, it can also be written with-

out T9.

Set a full stop. The word is

concluded if it is followed by

a space. Within a word, a full

stop represents an apostro-

phe or hyphen:

To add a word to the dictionary:

§Spell§

Select.

e.g. §provider.s§ = provider’s.

The last suggestion is deleted and

the word may now be entered with-

out T9 support. Press §Save§ to add it

automatically to the dictionary.

Moving the cursor to the right

ends the word.

Press briefly: Switch

between: abc, Abc, ^T9abc,

^T9Abc, 123. Status shown in

top line of display.

Press and hold: All input

modes are displayed.

Press briefly: Select special

characters (p. 19).

Press and hold: Open input

menu (p. 20).

Text entry

Use text modules

Text modules

Text modules can be stored in the

phone for adding to your messages

(SMS, MMS, e-mail).

Write message

(SMS, MMS, e-mail).

§Options§ Open text menu.

§Insert§

Select.

Write text modules

Select Text modules.

C ¢M ¢Text modules

§Options§ Select New text.

Select text module from

the list.

Write text module.

§Select§

Confirm. The text module

is displayed.

§Options§ Open menu and select

Save. Accept the specified

name or allocate a new

one.

Confirm. The text module

is inserted in the message

to the right of the cursor.

Save.

Calling

Dialling with number

keys

The phone must be switched on

(standby mode).

Set volume

Regulate the volume

(only possible during

a call).

If a Car Kit is used, its volume setting

will not affect the usual setting on

the phone.

Enter the number (always

with prefix/international

dialling code).

]

A short press clears

Redial previous numbers

the last digit, a long press

clears the entire phone

number.

To redial the phone number last

called:

Press the Call key. The dis-

played phone number is

dialled.

Press the Call key twice.

To redial other numbers that were

dialled previously:

End call

Press the Call key once.

Press the End key briefly.

Press this key even if the

person on the other end

of the line has hung up

first.

Pick out the phone

number from the list.

Press this key to select the

phone number.

Calling

Reminder

If the number is busy

§Prompt§ A beep reminds you to

redial the displayed

phone number after

15 minutes.

If the called number is busy or can-

not be reached because of network

problems several options are availa-

ble (depending on the service pro-

vider). An incoming call or any other

use of the phone interrupts these

functions.

Additional information

Store phone number in the

Addressbook/Phonebook.

Either

§Handsfr.§ Handsfree switch on (play-

back from loudspeaker).

Auto redial

Always switch off "handsfree

talking" before holding the

phone to your ear! Otherwise,

you will damage your hearing!

§Auto dial§ The phone number is

automatically dialled ten

times at increasing time

intervals. End with:

Press and hold to switch

microphone off.

B End key.

International dialling codes

Press and hold until a "+" is

displayed.

Call back

§Country§ Press and select country.

§Call back§ Your phone rings when

the busy number is free.

Press the Call key to dial

the number.

Phone number memo

You can enter a phone number during the

call. The person to whom you are speaking

can hear these entries. When the connec-

tion has ended you can save or dial the

phone number.

Calling

Accept call

The phone must be switched on. An

incoming call will interrupt any other

use of the phone.

Handsfree

You can put the phone aside during

a call. You can then hear the caller

via the loudspeaker.

§Handsfr.§ Activate handsfree

Press.

talking.

Switch on.

Press.

Use the joystick to adjust

the volume.

A phone number and the name of

the caller transmitted by the net-

work will be displayed if the number

is saved in the Phonebook/Address-

book. A picture of the caller may also

be displayed (p. 32).

§Handsfr.§ Deactivate.

Warning!

Always switch off "handsfree talking"

before holding the phone to your ear! Oth-

erwise, you will damage your hearing!

Reject call

Swapping between

2 calls

§Reject§

Press.

Establish a second connection

You can call another number during

a call.

Press briefly.

Warning!

Please make sure you have accepted the

call before holding the phone to your ear.

This will avoid damage to your hearing from

loud ringtones.

§Options§ Open call menu.

Hold

The current call is put on

hold.

Additional information

Now dial the new phone

number or

Press and hold to switch off

the ringing tone and vibration.

§Options§, select the Phone-

book, Addressbook, or

phone number.

Missed call display.

When the new connection is

established:

§Swap§

Swapping between calls.

Calling

Incoming calls during a call

Ending call(s)

You may need to register for this serv-

ice with your service provider and set

your phone accordingly (p. 84). Dur-

ing a call, you may be advised that

there is another call waiting. You will

hear a special tone during the call.

You have the following options:

Press the End key.

After the Return to held call? display,

you have the following selection:

§Yes§

You accept the call on

hold.

§No§

You end the 2nd call.

•

Accept the waiting call in addition

to the first

Conference

§Swap§

Accept the waiting call,

putting the current call on

hold to do so.

Call up to 5 parties one by one and

link them together in a multiparty

call. Some of the functions described

may not be supported by your serv-

ice provider or may have to be ena-

bled specially.

Always proceed as above to swap

between the two calls.

• Reject the waiting call

§Reject§

Press.

A connection has already been

established:

§Options§ Open menu and select

Hold. The current connec-

tion is maintained.

§Divert§

The waiting call is divert-

ed, for example, to the

mailbox.

Now dial a new number.

When the new connec-

tion is established ...

•

Accept the waiting call and end the

current call

End the current call.

§Options§ … open menu and select

Conference. The held call is

joined.

Accept new call.

Repeat procedure until all partici-

pants are linked together (up to

5 participants).

End

All calls in the multiparty

conversation are ended

when the End key is

pressed.

Calling

Call options

The following functions are only

available during a call:

Direct call

If this is active, only one number can

be dialled.

§Options§ Open menu.

Switch on

C ¢_¢DT_ire¢_ctS_cae_lc_lurity

Hold

Maintain current call.

Micro-

phone on

If switched off, the person

on the other end of the line

cannot hear you (muting).

Confirm selection.

Also: Press and hold

Enter phone code.

Handsfree

Volume

Call via the loudspeaker.

Adjust handset volume.

Phonebook/Addressbook.

When first prompted you define and

enter the phone code (4–8 digits).

Default

book

Confirm selection.

Please do not forget this code (p. 17)!

Conference

(p. 26)

Select phone number

from the Phonebook/

Addressbook or enter it.

Time/

Display duration of call up

to now and (if set) the

charges incurred while the

call is in progress.

charge

Confirm.

Send DTMF

Enter tone sequences

(numbers) for remote

inquiries to an answering

machine.

Apply

§Carol§

To dial the phone number

(e.g. Carol’s phone num-

ber), press and hold the

right display key.

Call

transfer=

Connect current call to a

second call. For you, both

calls are now ended.

Switch off

Main menu

Call status

Access to the main menu.

List all held and active calls

(e.g. participants in a con-

ference).

Press down:

Enter phone code.

Confirm input.

Calling

Using the Phonebook/

Addressbook

Store phone numbers and control

codes (DTMF codes) in the Phone-

book/Addressbook in the same way

as a normal entry.

Tone sequences (DTMF)

You can, for example, enter control

codes (numbers) for remote access

to an automatic answering machine

while another connection exists. These

entries are transmitted directly as

DTMFcodes (control codes).

Enter phone number.

§Options§ Open menu.

Press until a "+" appears in

the display (wait for the

connection to be estab-

lished).

Send DTMF

Select.

Enter DTMF codes

(numbers).

If necessary, wait again

for three seconds at a

time for the receiver to

process the entries safely.

Enter a name.

§Save§

Store entry.

You may also store just the DTMF

codes (numbers) and then send

them during the call.

My phone

Adjust your phone according to your

own wishes in the following ways to

give it a personal touch:

Where do I get what?

You can purchase additional ring-

tones, logos, animations and Java

applications from your service pro-

vider or directly from Siemens.

Ringtones (p. 81)

Assign individual ringtones to caller

groups or special dates

Service supplier portal

Pictures (p. 121)

Depending on your service provider,

you will find direct access to his por-

tal on your telephone via menu

items or bookmarks. Please contact

your service provider for more infor-

mation on these services.

Assign individual pictures or photos

to your Addressbook entries.

Animations (p. 80)

Choose a start-up and closing anima-

tion as well as a personal greeting.

Screensaver (p. 79)

Choose an analogue or digital clock,

or a personal picture.

Siemens Mobile Portal

You will find additional ringtones,

logos, animations and screensavers

as well as more application, games

and services in the Internet at this

address:

(Operator) Logo (p. 79)

Choose an individual picture (to be

displayed in standby mode)

www.siemens-mobile.com

Wallpaper (p. 79)

Choose your own permanent back-

ground image.

Or you can download them directly

via WAP:

wap.siemens-mobile.com

Colour scheme (p. 79)

Select a colour scheme for the user

interface.

You will also find a service for saving

data here as well as a list of the coun-

tries in which these services are

available.

Applications (p. 73)

Download your own applications

from the Internet.

My menu

Create your own menu with fre-

quently (p. 98) used functions,

phone numbers or WAP pages.

Default book

C ¢L ¢Select function.

Phonebook

The Phonebook is located on the

SIM card. Only one phone number

can be entered per entry. The Phone-

book on the SIM card can easily be

transferred into a different

telephone.

Show entries

The entries in the standard directory

(Addressbook or Phonebook) are

shown.

Select a name with the

first letter and/or scroll.

Business card

Create your own business card to

sent to a different GSM-phone. If no

business card has been created yet,

you will be asked for your input.

New entry

Create new entry.

Addressbook (see also p. 31)

Phonebook (see also p. 35)

Move from field to field to

enter your details.

§Save§

Press.

Default book

You can set a particulary directory as

your preferred one to use.

Additional information

The content of the business card corre-

sponds to international standards (vCard).

The selected standard book is

opened in standby mode with the

joystick.

Copy numbers from Address-

book/Phonebook.

Open Phonebook or

Addressbook.

Groups

See p. 34.

Addressbook

In the Addressbook, a lot of data can

be recorded for each entry and addi-

tional functions such as pictures,

birthdays, chat can be used.

See p. 37.

Addressbook

The Addressbook can store up to

1000 entries, each with a variety of

telephone and fax numbers as well as

additional address details. These

entries are managed separately from

those in the Phonebook in the phone

memory. However, you can exchange

data between the Addressbook and

the Phonebook on the SIM card.

Possible input fields

Last name:

URL:

First name:

Com. services >>

Group:

Phone number:

Phone no./office: Company:

Phone no./mobile: Address: >>

Fax:

Birthday: >>

Picture:

Fax 2:

New entry

The address book is set as standard:

E-mail address:

E-mail 2:

All fields

Open Addressbook

(in standby mode)

Additional information

Group: Allocation to a group

(p. 34).

Display input fields.

Select requiredinput

fields.

Address: Extension to enter the

complete address:

Fill in input fields. The

maximum number of

characters available is

shown at the top of the

display.

Street:, Post code:, City:,

Country:

Com. services

Information if the entry is

being used as a chat room

contact (p. 61) or for

At least one name must

be entered. Always enter

phone number with

prefix.

Walky talky (p. 107) :

Nickname:, Walky Talky ID:,

Walky Talky type:,

WV user ID:, ICQ number:,

AIM screen name:

Addressbook

Birthday: After activation, the date

Display/find entry

of birth is entered.

Open Addressbook

Reminder: The telephone

reminds you one day

before the birthday at the

time entered.

(in standby mode).

Select required entry.

Display.

Picture:

Assign a picture to the

entry. It is displayed if you

are called by the corre-

sponding phone number.

Display options

§Options§ The options menu only

ever offers the functions

for the currently selected

input field.

All fields/Reduced fields

Display of number of

input fields.

§Save§

Save the entry.

Move to ...

Allocate current or high-

lighted entries to a group.

Additional information

Temporary switch to

Phonebook.

View

Display an allocated pic-

ture.

Copy to SIM

Copies name and one

phone number to the

SIM card (Phonebook).

Synchronisation

The Siemens MPM (Mobile Phone Mana-

ger, p. 123) makes it possible to manage

the Addressbook using Windows^®PCs.

Using Remote syncr. you can synchronise

your mobile with an organiser stored on the

Internet (see also p. 117).

New SMS,

New MMS,

New e-mail

Create a message with the

selected entry.

Browser

Start WAP browser and

visit URL.

Inst. mes-

sage

Begin chat p. 61.

Talk to

Start Walky Talky session

(p. 108).

(For standard functions see p. 15)

Addressbook

Change entry

Address book options

Open Addressbook

Depending on the actual situation,

different functions will be offered.

These functions can be applied to

the entry currently selected as well

as to multiple selected entries:

(in standby mode).

Select required entry.

Press.

§Edit§

§Options§ Open menu.

Select input field.

Open entry.

§Edit§

Move to ...

Allocate current or high-

lighted entries to a group.

Copy to SIM

Copies name and number

to the SIM card (Phone-

book).

Make changes.

Save.

§Save§

Filter

Only those entries which

match the filter criteria are

displayed.

Dialling an entry

Open Addressbook

(in standby mode).

Import

Sort

Set up readiness to receive

for a Phonebook entry via

IrDA (p. 89) or SMS (p. 43).

Select a name with the

first letter and/or scroll.

Specify sorting criteria for

output of the Addressbook

entries.

The number is dialled.

If there are several numbers in the

address book entry, these are

offered for selection.

Enter search term.

(For standard functions see p. 15)

Select phone number.

The number is dialled.

Addressbook

Ringing tone for group

Assign a ringtone to a group that

plays when one of its members calls

you.

Groups

Nine groups are specified in your

phone to enable you to arrange your

Addressbook entries clearly. You can

rename seven groups.

C ¢_¢T_Gro¢_upR_ci_an_llg_stones

Open Addressbook

(in standby mode).

Select group.

<Groups> Select (the number of

entries is listed behind the

group name).

Confirm. If a ringtone has

already been set, it will be

played. Otherwise, the

ringtone list will be dis-

played and you can select

one.

Select group.

Groups menu

§Options§

Open menu.

I _{If necessary, select}

a ringtone.

Rename

group

Change name of group.

Confirm.

Group

symbol

Assign a symbol to a group.

The symbol must then appear

in the display when one of the

group members calls.

Additional information

No group: Contains all Addressbook

entries that do not belong to a group (name

cannot be changed).

Received: Contains Addressbook entries

received by IrDA (p. 89) or SMS (p. 43)

(name cannot be changed).

Phonebook

Entries in the Phonebook (on the SIM

card) are managed separately from

those in the Addressbook. You can,

however, exchange data between

the Phonebook and the Address-

book.

Group:

Important phone numbers are com-

bined together in a group (VIP). This

is independent of the Addressbook

groups.

Location:

Default SIM

New entry

If the Phonebook has been selected

as standard:

Special SIM cards can save phone

numbers in a protected area

(Protected SIM) (PIN2 required).

Open Addressbook

(in standby mode).

Record number:

Each entry is automatically assigned

a record number. You can also dial

using the record number.

Select <New entry>.

Display input fields.

§Save§

Press to store the new

entry.

Select input field.

Additional information

Fill in input fields. The

maximum number of

characters available is

shown at the top of the

display.

Temporary switch to

Addressbook.

§Country§

International dialling code ................... p. 24

Functions related to Text entry ..........p. 19

Phone number:

Always enter phone number with

prefix. An entry is not saved without

a phone number.

Name:

Enter first and/or last names.

Phonebook

Call (search for an entry) Phonebook options

Open Phonebook.

The following functions are

available, depending on the current

situation.

^JI

Select a name with the

first letter and/or scroll.

§Options§

Open menu.

Number is dialled.

Copy into 9

Copy all highlighted

entries to the Address-

book.

Call using record no.

A record number is automatically

assigned to every new entry in

Phonebook.

Copy all to 9

Copy all entries to the

Addressbook.

Delete all

The entire Phonebook

is deleted. PIN-pro-

tected

Enter record number.

Press.

Import

Set up readiness to

receive for a Phone-

book entry via IrDA

(p. 89) or SMS (p. 43).

Press.

Change entry

(For standard functions see p. 15)

Select entry in

§Edit§

Phonebook.

Press.

Select desired input field.

Make changes.

Press.

§Save§

Phonebook

There might be phone numbers

saved in your Phonebook that have

been provided by your service pro-

vider. They may be used to call local

or national information services or to

use services offered by your service

provider.

Open Addressbook

(in standby mode).

Select.

Enter "own" phone numbers in Phone-

book (e.g., fax) for information. These

numbers can be changed, deleted

and also sent as an SMS message.

Phone number extensions in the

Phonebook

Digits may be replaced by a "?" when

phone numbers are entered in the Phone-

book/Addressbook:

Display the phone numbers saved in

the VIP group.

Press down:

These wildcards must be replaced with

numbers before dialling (e.g., with the

extension numbers in a phone system).

Entries stored in the Phonebook on

the SIM card can also be used on

other GSM phones.

To make a call, select the phone number

from the Phonebook/Addressbook.

Press.

Replace "?" with numbers.

Number is dialled.

On special SIM cards, phone num-

bers can be stored in a protected

location. PIN2 is required for editing.

Call records

The phone number of a caller is dis-

played if

Up to 500 entries are stored in

the records:

• the caller has switched off the

Incognito function and

Calls missed

The phone numbers of calls that you

have received but not answered are

stored for call back purposes.

• the network supports the "Caller

Identity" function.

Alternatively, a caller’s name is dis-

played if it is stored in the Phone-

book/Addressbook.

Icon for missed call (in

standby mode). Press the

display key beneath the

symbol to call up the Inbox

(p. 42).

Your phone stores the phone num-

bers of calls for convenient redial-

ling.

Calls received

Accepted calls are listed.

C ¢

Calls dialled

Access to the last numbers dialled by

you.

Select record.

Open call list.

Fast access in standby

mode.

Select phone number.

Dial phone number.

Delete records

The records are deleted.

§View§

Display information on

the phone number.

Call list menu

The records menu can be called up if

an entry is highlighted.

§Options§ Open menu.

Copy into 9/

Copy to SIM

Copy the currently

selected phone number

into the preferred

directory.

(For standard functions see p. 15)

Durat/charges

You can display the charges and

duration during a call. You can set

a unit limitation for outgoing calls.

Account limit

(PIN2 prompt)

Special SIM cards allow you or the

C ¢ ¢Durat/charges

service provider to define a credit or

a period after which the phone is

barred for outgoing calls.

Last call

All outg. calls

All incoming

Remain. units

Charge sett.

§Edit§

Press.

Enter PIN2.

Account limit

Switch on.

Select.

Enter number of units.

Open report or settings.

Reset the selected report.

§Reset§

§OK§

Confirm.

Then confirm the credit or reset the

counter. The status display for pre-

paid cards may vary depending on

the service provider.

Charge sett.

Open menu.

Auto display

Call duration and charges are

automatically displayed.

Currency

Edit your currency.

Personal rate

(PIN 2 prompt)

Enter the currency as well as the

charge per unit and time.

Camera

You can view photos/videos

recorded on the integrated camera

immediately,

the selected resolution. In video

mode, the recording time already

used and the maximum recording

time still available is shown here.

• use the photo as a background

image, logo, a switch on/off

animation or a screensaver.

è Camera

Ù Ú

• send the photo/video via MMS or

e-mail.

Switch on

C ¢

Premium

Ò ì Options

Starts camera in standby

mode.

Switch over to single

image

Photo mode

and video recording.

Takes a photo.

The current (preview) image is dis-

played. You will see the following in

the first line from left to right:

Displays the preview

image of the next photo.

The photo is saved with a name, the

date and the time. To enter the

name, see Setup in the options

menu.

Brightness

Zoom factor.

White balance.

Flash connected.

Settings prior to taking a photo:

Setting the brightness.

In the top right-hand corner of the

preview image, the number of pho-

tos which can still be taken in the

selected resolution is displayed. This

number varies considerably from

motif to motif (storage space

Sets the zoom factor.

required). Beneath the preview

image, you will find a reference to

Camera

Image resolution

A setting can be made for the quality

of the image regardless of the pre-

view image resolution.

Camera options

The following functions are available,

depending on the current situation.

§Options§ Open menu.

Premium:

High:

Medium:

Wallpaper:

640 × 480 (VGA)

320 × 240 (QVGA)

160 × 120 (QQVGA)

132 × 176

Settings

• Name for recordings

• Image resolution.

Pictures

Displays list of photos.

Display the video list.

see also Add contact

(p. 62).

Enter welcome text.

memb.

Search for group member.

Delete group

Delete group.

Invite

Invitation to the contacts

in your own group to Inst.

Message.

Delete

member

Delete contact from the

group member list.

Add group

Add new group.

Search group

Search for group on the

server (no longer in the

"administered groups"

list).

Inst. message

Creating a new contact list

The current contact list is displayed.

§Options§ Open menu.

Contact list options

§Options§ Open menu.

Details =

Additional information

about the contact or the

group.

Contact lists

Available contact lists are

displayed.

My settings

Information on your cur-

rent personal status

(p. 67).

§Options§ Open menu.

Create

Contact list ID:

Give the contact list its

Select.

Manage

Functions for managing

a contact or a group.

own, specific name.

Contact lists

Block list

Display contact lists for

selection.

Name:

Allocate self-explanatory

names.

Display all blocked con-

tacts. Can be unblocked.

Confirm.

Appl. settings

Suspend

Set the application

(p. 67).

Terminate the applica-

tion, the server remains

connected.

Logout

Help

Log off from the server

and return to start menu.

Display help text.

Inst. message

Options (individual contact)

§Options§ Open menu.

Start chat

A contact list must be displayed.

Select a contact or

a group.

Send sound

Select and send a melody/

tone from the list (DRM

p. 13).

Startcommunicationwith

the contact.

Send

picture =

Select and send a picture

from the list (DRM p. 13).

The page is displayed.

During Inst. Message with

a group, the name of the

sender is placed in front

of each contribution.

Send any

Details

Send any file.

Information about the con-

tact (if this is authorised by

him).

Open editor.

Write text

Clear all

Delete all texts in the cur-

rent Inst. Message.

Block

contact

Send text. The text

appears in the chat soon

afterwards.

No more messages are

received from the contact

and the contact receives

no status information from

you.

Naturally, you can also receive mes-

sages from contacts whom you do

not know. This will be pointed out to

you in the display, and you can

either switch to Inst. Message or

ignore/block the contact.

This function works for all

your lists.

Inst. message

Options (group contact)

§Options§ Open menu.

Setting

C _¢¢_SM_etup¢Inst. message

Leave group

Details

Exit group.

¢Select function.

Information about the

group:

Account

The list of available accesses is

displayed.

Group ID:, Name:, Topic:,

Owner:

Clear all

Delete all texts in the cur-

rent Inst. Message.

Select an access to estab-

lish a connection.

_/C

Receiving objects

You will be informed in the display if

sounds or pictures are sent to you

during a dialogue.

<New entry>/Account sett.

Set up an access or

change the settings as

specified by the service

provider. Depending on

the service provider, the

settings may not be

changeable.

§Receive§ Accept object.

§Reject§

Reject object.

Name:

URL:

Name of the access.

Msg. history

Enter URL, e.g.

www.abc.com

C _¢¢M_Msg.¢_hisI_tn_os_rt_y. message

User ID:

Enter a non-ambiguous

user (login) name.

The messages from the last meeting

are displayed. You can read and

delete the contributions.

Password:

Enter password (shown

as a series of asterisks).

Requirement: The server must be

disconnected, see Suspend (p. 64)

and Automatic login: (p. 67).

Inst. message

My settings

Appl. settings

Information on your current per-

sonal status:

Settings for the application used:

Automatic

Auto-reconnect to the

last access to be used.

Alias:

Your own alias by which

you can be found on the

server.

Timeout:

Time without action after

which the application is

terminated. However, the

server remains con-

nected.

AIM screen

name:

Name to be displayed in

the group.

Mood:

Information about your own

mood, e.g.

Message info:/

Online info:

Signal the receipt of mes-

sages: Yes/No

Happy, Sad, Sleepy, etc.

Signal given as:

• Sound

• Silent alert

• Pop-up

Popup windows

authorised: Yes/No

Status text:

Availability:

Random text information,

e.g. “Am at home”.

Availability:

Available, Not available,

Discreet

Mobile:

Enter the phone number

with internal extension

code.

§Options§ For each setting, specify

who is allowed to view

your personal informa-

tion:

Public

All contacts.

Private

Contacts designated as

Friend: (p. 62).

Hidden

Nobody.

Voice message/mailbox

C ¢M ¢Setup¢Voice message

Save call divert number

Most service providers provide

a mailbox in which a caller can leave

a voice mail for you if

Calls are diverted to this phone

number.

C _¢¢_Dive¢_rtPhone setup

• if your phone is switched off or

not ready to receive,

¢^{e. g. Unanswered}¢Set

• if you do not want to answer,

Enter phone number.

• if you are making a phone call

(and if Call waiting (p. 84) is not

activated).

§OK§

Registration with the net-

work is confirmed a few

seconds later.

If the voice mail service is not part of

your service provider's standard

package, you will need to register for

it, and possibly make the settings

manually. The following sequence

may vary from service provider to

service provider.

Listening to message

A new voice message can be

announced as follows, depending on

the service provider:

Icon plus beep.

Setup

Notification via SMS.

The service provider supplies you

with two phone numbers:

Save mailbox number

You call this phone number to listen

to the voice mails left for you.

You receive a call with an automatic

announcement.

Call your mailbox and play the mes-

sage(s) back.

C _¢¢_VM_oice¢_mS_ese_stu_ap_ge

Press and hold (if neces-

sary enter mailbox

number once only). Con-

firm with §OK§ and §Mailbox§

depending on your serv-

ice provider.

Select number from

Phonebook/Addressbook

or enter/change it.

§OK§

Confirm.

CB services

C _¢¢_CM_{B se}¢_rviS_ce_et_sup

Topic

Select

§Options§ Open list menu.

Some service providers offer infor-

mation services (info channels, Cell

Broadcast). If reception is activated,

your Topic list will supply you with

messages on the activated topics.

If a topic is selected in the list you

can view it, activate/ deactivate it,

edit it or delete it.

CB languages

Receive Cell Broadcast messages in

only one specific language or in all

languages.

CB messages are displayed in

standby mode, longer messages are

scrolled automatically.

Displays

Receive CB

Topic activated/deactivated.

You can activate and deactivate the Ö,Õ

CB service. If the CB service is acti-

New messages received on

the topic.

vated, standby time for the phone

will be reduced.

Messages already read.

Topic list

You can add any topics to this per-

sonal list from the topic index. You

can preset 10 entries with their

channel numbers (ID) and, if applica-

ble, with their names.

New topic Select.

• If no topic index is available, enter

a topic with its channel number

and confirm with §OK§.

• If the topic index has already been

transmitted, select a topic and

activate it with §Options§.

Surf & fun

Get the latest information from the

Internet that is specifically adapted

to the display options of your phone.

In addition, you can download

games and applications to your

phone. Internet access may require

registration with the service pro-

vider.

Browser menu

§Options§ Open menu.

Homepage

Call up the pre-set

homepage for the current

profile.

Bookmarks

• List bookmarks

Display list of book-

marks stored in the

phone.

Access to the service

provider

Direct call-up of the browser with

the URL from your service provider.

• Bookmark site

The current page is

saved as a bookmark.

Go to...

Enter URL for direct dial

to an Internet address,

e.g. wap.siemens-

mobile.com

Internet

C ¢ ¢Internet

Reload

Reload current page.

The browser is activated with the

pre-set option as soon as you call up

the function (Browser settings,

S. 71; may be specified/pre-assigned

by service provider).

Show URL

Display the URL of the

page currently loaded for

sending via SMS/MMS/

e-mail.

History

Display last Internet sites

to be visited.

Disconnect

File

Disconnect the Internet.

Save object on the current

page or save the com-

plete page; display saved

pages.

Setup

Set or reset browser

(p. 71).

Exit browser

Close the browser.

Surf & fun

End connection

Browser settings

Press and hold to clear

down the connection and

close the browser.

C ¢ ¢Internet

§Options§ Open menu.

Setup

Select.

Navigation in the browser

• Select a link.

Browser

Set start option as well as

• Settings, status on/off.

handling of pictures and

sounds plus send options.

• Press briefly: back a page.

Profiles

The list of profiles is dis-

played for activation/set-

ting. For more information,

contact your service

provider.

• One input field/link forward/back.

• Scroll one line.

Display symbols in the browser

(selection)

Protocol

parameters

Set protocol parameters,

push messages and abort

time as well as handling of

cookies.

Connect

Network

No network

Security

Context

GPRS online

Set encryption.

Reset session; delete

cache, history and cookies.

Enter special characters

* ^,0

Select important special

characters.

Profiles

Preparation of the phone for Internet

access depends on the service pro-

vider concerned:

Your Internet browser is licensed by:

Profile pre-set

In most cases, access profiles have

already been created for one or more

service provider(s).

Select profile.

Activate profile.

Surf & fun

Set profile manually

Save

You will receive the necessary data

from the service provider or via the

"Setting Configurator" (p. 125) at:

www.siemens-mobile.com/

Bookmark site

The current page is saved

in the phone as a

bookmark.

mobilescustomercare

Bookmark options

§Options§ Open menu.

Edit

§Options§ Open menu.

Start processing. For the

Internet-specific settings

below, pleasecontactyour

service provider.

Here you will find functions for

changing and managing bookmarks

and their folders. This includes edit-

ing individual entries with the corre-

sponding URLs as well as deleting

and moving them to other folders.

Delete

Delete selected profile.

Bookmarks

C ¢ ¢Bookmarks

Display URL/call up page

Emoty

If your phone is equipped with an

Emoty CLIPit™ cover, you can

List bookmarks

transmit emotions. Various figures

are animated with the integrated

pressure, touch, and vibration

sensors. The animations can be sent

as MMS. You will find extensive

information in the Emoty userguide.

Display list of bookmarks

stored in the phone.

Select bookmark.

Call up URL.

Surf & fun

Download new

Games and Applications

Select a service provider

or URL.

Games and applications are offered

on the Internet. Once downloaded,

these are available to you via the

telephone. Most applications include

instructions. Some applications and

games are already pre-installed on

your telephone. You will find these

listed here:

Start WAP browser and

visit URL.

Only description file

The description file is

loaded for information

purposes only. The appli-

cation/game itself must

be loaded separately.

www.siemens-mobile.com/cx70

Requirements

or complete download

WAP profile (p. 71) and the access

(p. 90) must be configured.

The application/game is

completely loaded.

Download

Select the correct access depending

on whether you are loading games

or applications:

Apply

Remember that applications/games

may be protected (DRM, p. 13).

C ¢O¢Games

The executable applica-

tion is saved on the tele-

phone and can be started

immediately .

C ¢O¢Applications

In addition to URLs and service pro-

viders for the download, any availa-

ble applications/games and folders

will be displayed.

Downl. assist.

C ¢O¢Downl. assist.

You will not be left on your own dur-

ing the download!

Surf & fun

Options

Additional information

You can use WAP to download applications (e.g.

ringtones, games, images, animations) from the

Internet. Downloading or running applications will

not affect or change the software already

Processing and administering your

applications and folders:

Move

Move applications between

folders.

installed on your Java™-enabled mobile phone.

Siemens excludes all warranty and liability claims

in respect of or in connection with any applica-

tions subsequently installed by the customer and

any software not included in the original delivery

package. This also applies to functions enabled

subsequently at the customer's instigation. The

purchaser bears sole risk for the loss of, damage

to, and any defects arising in, this device or the

applications and for any direct damage or conse-

quential damage of whatever nature resulting

from the use of this application.

New folder

Reinstall

Create and name new

folder.

Reinstall an application

(update).

Security

Reinstall

Select a safety level.

Repeat after transmission

error.

For technical reasons, such applications and sub-

sequent enabling of certain functions are lost in

the event of the device being replaced/re-sup-

plied and may be lost if it is repaired.

Attributes

Show details of the applica-

tion/folder (name, version,

size, path, producer, date).

In such cases, the buyer is required to download

or release the application again. Please ensure

that your phone has Digital Rights Management

(DRM) so that individual applications downloaded

via WAP are protected from unauthorised repro-

duction. These applications are then exclusively

intended for your phone and cannot be trans-

ferred from this even to create a backup.

HTTP

Display profile list for

activation/setting

profile

(For standard functions see p. 15)

Siemens does not warranty, guarantee or accept

any liability for the customer's ability to download

or enable applications again or to do so free of

charge. If technically possible, back up your

applications to a Windows PC using the

"Mobile Phone Manager", p. 123,

www.siemens-mobile.com

Setup

Profile settings

Edit a default profile or create a new

personal profile:

Profiles

C ¢T¢Profiles

Several settings can be stored in

a phone profile in order, for exam-

ple, to adapt the phone to the sur-

rounding level of noise.

Select profile.

§Options§ Open menu.

Change sett.

• Five standard profiles are provided

with default settings. They can be

changed however:

Select.

The list of available functions is dis-

played.

Normal environment

Quiet environment

Noisy environment

Car Kit

When you have finished setting

a function, you return to the profile

menu where you can change

a further setting.

Headset

Additional information

• You can set two personal profiles

(<Name>).

• Calling up the list in standby mode:

Profile list is displayed.

• The active profile is marked with ·.

• The special profile Aircraft mode is

fixed and cannot be changed.

Switching on a profile

Select default profile or

personal profile.

Switch on profile.

Setup

Profile-Optionen

Aircraft mode

§Options§ Open menu.

All alarms (appointments, alarm

clock) are deactivated. This profile

cannot be modified.

Activate

Activate selected profile.

Change profile settings.

Change sett.

Copy from

Switch on

Scroll to Aircraft mode.

Copy settings from

another profile.

Confirm selection.

Rename

Change personal profile

(except default profiles).

Confirm safety inquiry

again in order to activate

the profile. The phone

switches itself off auto-

matically.

Car Kit

If an original Siemens Car Kit is used,

the profile is switched on automati-

cally as soon as the phone is inserted

into the cradle (see also accessories,

p. 133).

Normal mode

When you switch on your phone

again, the previously set profile will

be reactivated automatically.

Headset

The profile is only switched on auto-

matically if an original Siemens

headset is used (see also accessories,

p. 133).

Setup

Activate new topic

Themes

C ¢T¢Themes

Select topic.

Load a completely new user inter-

face in your telephone. With the

press of a key, various functions are

re-organised based on a topic, e.g.

Display topic preview.

Activate new topic.

• switch on/off animation,

• background image,

• screensaver,

• switch on/off melody,

• additional animations.

Topic files are compressed to save

memory space. After a download

(p. 73) or a call from My stuff, these

are automatically unzipped when

activated.

Additional information

It is possible that the existing settings could

be overwritten.

Setup

§Change§ Display the possible

Dynamic light

rhythms.

¢T¢Dynamic light

C _{¢Select function.}

Select them from several

flash rhythms.

The LEDs beneath the top of the

phone are used to optically signal

various functions.

Allocate selection.

Play demo

All flash rhythms are displayed in

sequence.

Show effects

Switch on function.

§Cancel§

Terminate.

Select

You can set the optical signals for the

following functions:

Standby

Net search

d Calls

Group calls

Other calls

During a call

Incoming msgs

Appointments

CarKit conn.

Low battery

During on/off

Soundplayer

Setup

Wallpaper

Set wallpaper graphic for display.

Display

C _¢¢_ST_ele¢_ctD_fi_us_npl_ca_ty_ion.

Logo

Language

Choose graphic to be displayed

instead of the provider logo.

Set the language of the display text.

When "automatic" is set, the lan-

guage of your home service provider

is used.

Colour skin

Select colour scheme, incl. back-

ground image for the entire user

interface

If a language that you do not under-

stand happens to be set, the phone

can be reset to the language of your

home service provider with the fol-

lowing input (in standby mode):

Screensaver

The screensaver shows a picture in

the display when a period set by you

has elapsed. An incoming call and

pressing any key will end the func-

tion except if the safety function is

activated.

_{# 0 0 0 0 #}A

Text input

T9 preferred

Activate/deactivate intelligent text

entry.

Preview

Display the screensaver.

Input language

Style

Select language for text entry. Lan-

guages with T9 support are marked

with the T9 symbol.

Select Analogue clock, Digital clock,

Bitmap, Energy saving

Bitmap

Select image in the My stuff.

Setup

Timeout

Own greeting

Set period after which the screen-

saver starts.

Enter greeting to be displayed

instead of animation when phone is

switched on.

Security

To terminate the screensaver, the

telephone code is requested.

Big letters

You can choose between two font

sizes for the display.

Auto key lock

Automatic keypad locking if no key

has been pressed for one minute in

standby mode.

Illumination

Set display light brighter/darker. The

darker the setting the longer the

standby time.

Unlocking:

Press and hold.

Press the joystick repeat-

edly at the top/bottom to

adjust up or down.

Note

The screensaver Digital clock reduces the

phones standby time.

Start up anim.

Select animation to be shown when

phone is switched on.

Shutdn anim.

Select animation to be shown when

phone is switched off.

Setup

Volume

Set different volumes for types of

call/functions.

Ringtones

C _¢¢_ST_ele¢_ctR_fi_un_ngt_co_tn_ioe_ns_.

Select

Set the tones on the telephone to

suit your requirements.

Incoming call

Walky Talky

Messages

CB services

Alarm clock

Organiser

Ringer setting

On/off

Activate/deactivate all

tones.

Beep

Reduce ringtone to

a short signal (beep).

System

Silent alert

The ringtone is sounded

again.

To avoid the disturbance caused by

a ringing phone, you can activate the

silent alert function as an alternative.

The silent alert can also be activated

in addition to the ringtone (e.g. in

noisy environments). This function is

deactivated when the battery is being

loadedandaccessoriesareconnected

(except the headset).

Set volume.

Confirm setting.

Additional information

Please make sure you have accepted the

call before holding the phone to your ear.

This will avoid damage to your hearing from

loud ringtones.

Select one of several dif-

ferent silent alerts.

Setup

More melodies

Allocating a ringtone

Allocate further ringtones for:

Messages

A ringtone which has already been

selected will be played or the list of

possible ringtones will be displayed

for selection.

Alarm clock

Organiser

d Calls

Startup melody

Allocate a single ringtone to all

phone numbers in the Addressbook.

Shutdown mel.

or record new ones with:

Sound recorder (p. 113)

Group calls

Allocate a different ringtone to each

group.

Other calls

Allocate one ringtone to the remain-

ing callers.

Walky Talky

Assign one ringtone to a Walky Talky

connection.

Setup

Install

Phone Pilot

You can download additional figures

on the Internet.

C _¢¢T_Sele¢_ctP_fh_uo_nn_ce_tiP_oi_nlo_.t

Select entry in the list or

Your Phone Pilot accompanies you

Inbox.

with instructions for many actions

you can perform with your phone. It J

reminds you of important deadlines

or birthdays.

When installing a new

Phone Pilot you can give it

its own name.

A Phone Pilot is in the phone by

§Yes§

Activate.

default and cannot be deleted.

Activate/deactivate

Off

You can deactivate Phone

Pilot function.

Standard Select the included

"standard figure".

If you have additional figures down-

loaded, you can also install, activate,

or delete them:

Select entry.

Activate.

Setup

Condition set.

Not set.

Call setup

C _¢¢_ST_ele¢_ctC_fa_ul_nl s_ce_tt_ioup_n.

Display if status is

unknown (e.g. with a new

SIM card).

Hide ID

Clear all

All set diversions are cleared.

When you make a call, your phone

number can be displayed on the

recipient's display (depending on the

service providers).

Set up call divert (example)

To suppress this display, you can

enable the "Hide ID" mode for all sub-

sequent calls or just for the next call.

You may need to register separately

with your service provider for these

functions.

The most common condition for call

divert is, for example:

Unanswered

Select Unanswered.

(Includes the conditions

Not reachable, No reply,

Busy, see below)

Call waiting

If you are registered for this service,

you can check whether it is set and

you can activate/deactivate it.

Set

Confirm.

Select.

Ï /J

Confirm.

Divert

You can specify the conditions under

which calls should be diverted to

your mailbox or other numbers.

Select or enter the phone

number to which the calls

are to be diverted.

Status check

§Mailbox§ Use existing mail-

box phonenumbers, or

enter them if necessary.

You can check the current divert sta-

tus for all conditions. After a short

pause, the current situation is trans-

mitted by the network and displayed.

Confirm. After a short

pause, the setting is con-

firmed by the network.

Setup

All calls

All calls are diverted.

Additional information

Note that the divert is stored in the network

and not in the phone (e.g., when the

SIM card is changed).

Icon in the top line of the

display in standby mode.

Reactivate divert

Not reachable

The last divert has been stored. Proceed

as with "Set divert". The stored phone

number is displayed. Confirm number.

Divert occurs if phone is switched off

or is out of range.

No reply

Call screening

A call is only diverted after a delay

that is determined by the network.

The period can be set to a maximum

of 30 seconds in 5 second intervals.

Only calls from phone numbers that

are in the Phonebook/Addressbook

or in a group are signalled. Other

calls are only displayed.

Busy

Divert occurs if a call is in progress.

If Call waiting is activated (p. 84), you

will hear the call waiting tone during

a call (p. 26).

Any key answ.

Incoming calls can be accepted by

pressing any key (except for B ).

Receiving fax

Fax calls are diverted to a number

with a fax connection.

Minute beep

During the call, you will hear a beep

after each minute as a reminder of

the time elapsed. The recipient does

not hear this beep.

Receiving data

Data calls are diverted to a phone

number with a PC connection.

Setup

Phone identity

The phone identity number (IMEI) is

displayed. This information may be

useful for customer service.

Phone setup

C _¢¢T_Sele¢_ctP_fh_uo_nn_ce_tis_oe_ntu_.p

Key tones

Set the type of acoustic key

acknowledgement.

§More§

Press several times to

display additional

information about the

device.

Info tones

Device check

Set service and alarm tones:

After the last information page,

a self-test as well as individual test

are offered. If you select Selftest, all

individual test are carried out.

On/off

Activate/deactivate tones.

Extended If switched on, a wider

range of service tones is

available, e.g.: end of

Software version

menu reached, network

connection interrupted.

Display the software version for your phone

in standby mode:

# 0 6 #, then press §More§.

Automatic switch off

The phone switches off each day at

the set time.

Memory assis.

The memory assistant will help you if

there is insufficient phone memory.

If necessary, it is automatically

started by applications.

Activate

§Time§

Press.

Enter time

(24-hour clock).

After the capacity has been checked,

all files and folders are displayed

with their size and you can view,

open or delete them as necessary.

Deactivate

Confirm.

§Manual§ Press.

Confirm.

Setup

File system

Master reset

Reset phone to default values (fac-

tory setting). This does not affect the

SIM card or the network settings.

Format

(Phone-code protected)

The telephone memory is formatted

and all saved data such as ringtones,

pictures, games, etc. is deleted. For-

matting can last longer than one

minute.

Alternatively enter in standby mode:

# 9 9 9 9 #

Clean up

Creating more memory by deleting

temporary, non-required files.

Setup

§Options§

Open menu.

Clock

C _¢¢_ST_ele¢_ctC_fl_uo_nck_ction.

Time/date

The clock must be set correctly once

at start-up.

Set time

zone

Set time zone.

Auto time

Have the time zone auto-

matically set by the net-

work.

zone

Search city

Help

Search for a city.

§Change§ Press.

Operating instructions.

First enter the date (day/

month/year), then the

time (hours/minutes/

seconds).

Date format

Select the display format for the

date.

Additional information

If the battery is removed for longer than

30 seconds, the clock must be reset.

Time format

Select 24h or 12h.

Buddhist year

Switch to the Buddhist year (not on

all phone models).

Time zones

The time zone can be selected in the

world map or a city list:

Show clock

World map

Select the desired time

zone.

Activate/deactivate time display in

standby mode.

City list

Auto time zone

The time is set automatically.

Select a city in the

selected time zone.

Setup

GPRS info

Display of information on connec-

tion status.

Connectivity

C _¢¢_ST_ele¢_ctC_fo_un_nn_ce_tc_ioti_nvi_.ty

IrDA

GPRS

Your phone has an infrared inter-

face. With this interface, you can

(General Packet Radio Service)

exchange data such as pictures, ring-

tones, Addressbook entries, busi-

ness cards or organiser data with

other appliances which also have an

infrared interface.

Switch GPRS on/off

GPRS is a new method for transmit-

ting data faster in the mobile net-

work. Use GPRS and if the network

has sufficient capacity, you can be

connected to the Internet perma-

nently. Only the actual transmission

time is charged by the network oper-

ator. Some service providers do not

yet support this service.

The infrared interface is on the right

side of the phone. The distance

between the two devices must not

exceed 30 cm. The infrared windows

in both appliances must be aligned

as accurately as possible with each

other.

Shown in the display:

Activated and

available.

Shown on the display:

IrDA activated.

Registered.

During transmission.

Temporarily interrupted.

Setup

Select CSD settings, and/or

GPRS settings.

Data services

Basic setting and activation of the

connection profiles for data trans-

mission such as MMS, WAP.

§Edit§

Select service and enter

data (see below).

§Save§

Save settings.

The phone default setting varies

from service provider to service pro-

vider.

CSD (Circuit Switched Data)

Dial-up

number:

Enter ISP number.

• The settings have already been

implemented by the provider. You

can start immediately.

Call type:

Select ISDN or

analogue.

• Access profiles have already been

created by your provider. Then

select and activate profile.

Enter login name.

Password:

Enter password (shown

as a series of asterisks).

• The access profiles must be

configured manually. In this case,

you will receive the necessary

data from the service provider or

via the "Setting Configurator" at

(p. 125):

DNS1 / DNS 2:

(optional).

GPRS (General P acket Radio Service)

You can only start to use GPRS once

you have activated GPRS on your

phone (p. 89).

www.siemens-mobile.com/

mobilescustomercare

APN:

Enter service provider

address.

Select profile

Select the profile.

Enter login name.

Confirm selection.

Password:

Enter password (shown

as a series of asterisks).

Set profile

DNS 1 (opt.):

DNS 2 (opt.):

(optional).

Select the profile.

§Options§

Open menu.

§Edit§

Open the selection.

Setup

HTTP profile

Authentication

The phone default setting varies

from service provider to service pro-

vider.

Activate or deactivate encrypted

WAP dial-up (CSD connections only).

Fax/data

Fax/data mode using a PC

With the phone and a connected PC,

you can transmit and receive faxes

and data. Appropriate software for

fax and data communication must

be available on your PC and there

must be a connection to the phone.

• The settings have already been

implemented by the provider. You

can start immediately.

• Access profiles have already been

created by your provider. Then

select and activate profile.

• The access profiles must be con-

figured manually.

Fax and data services must be ena-

bled by the service provider. There

are variations in fax and data recep-

tion, depending on the network.

Please ask your service provider

about this.

If necessary, check with your service

provider for details. You will find the

current settings for the service pro-

vider in the Internat at this address:

www.siemens-mobile.com/

mobilescustomercare (p. 125).

Send voice/fax

Make the settings.

Set this function on the phone before

transmission so that you can switch

from voice mode to fax mode.

Setup

Rec. voice/fax

(Only if no special fax or data number

is available).

Start the required communication

program on your PC and select the

function on the phone during the call

(the PC will take over the connection).

End transmission

End transmission with PC-software

and/or press

Rec fax/data

Your service provider has given you

a number for telephoning and

a fax/data number.

The call is signalled by a special ring-

ing tone and the type of call (fax or

data) is displayed. Now start the

communication program in your PC

to receive the fax/data.

Setup

Only ‚

(PIN 2 or phone code protected)

Security

C ¢_¢ST_ele¢_ctS_fe_uc_nu_cri_tt_iy_on.

Dialling options are restricted to

SIM-protected phone numbers in the

Phonebook. If only area codes are

entered, relevant phone numbers

can be added to these manually

before dialling.

Auto key lock

If activated, the keypad is locked

automatically if no key has been

pressed for one minute in standby

mode. This prevents the phone from

being used accidentally. However,

you can still be called and you can

still make an emergency call.

If the SIM card does not support

PIN 2 input, the whole Phonebook

can be protected with the phone

code.

Additional information

The keypad can also be directly locked and

unlocked in idle state.

This SIM only

(Phone-code protected)

The phone can be connected to

In each case:

a SIM card when the phone code is

entered. Unless the phone code is

known the phone will not operate

with a different SIM card.

Press and hold.

Direct call

(Phone-code protected)

If the phone is to be used with a dif-

ferent SIM card, enter the phone

code when requested.

Only one phone number can be

dialled (see also p. 27).

Codes

Description, see p. 17:

PIN control, Change PIN, Change PIN2,

Chg.phonecode

Setup

When roaming

Barrings

You do not receive calls when you

are outside your home network. This

means that no charges are incurred

for incoming calls.

Barring restricts the use of your SIM

card (not supported by all service

providers). You need a 4-digit net-

work password for network barring.

Your service provider will give you

this password. You may need to be

registered separately for each

barring.

Status check

The following information can be

displayed after a status check:

Barring set.

All outgoing

All outgoing calls except emergency

numbers are barred.

Barring not set.

Status unknown

(e. g. new SIM card).

Outgoing intl.

(International outgoing)

Only national calls can be made.

Clear all

All barrings are deleted. A password

which the service provider will give

you is necessary for this function.

Out.int.x.home

(International outgoing without

home country)

International calls are not permitted.

However you can make calls to your

home country when abroad.

All incoming

The phone is barred for all incoming

calls (forwarding of all calls to mail-

box provides a similar effect).

Setup

Network info

The list of GSM networks currently

available is displayed.

Network

C _¢¢_ST_ele¢_ctN_fe_ut_nw_co_tr_ik_on.

Indicates non-authorised

service providers

(depending on SIM card).

Line

This function is only displayed if it is

supported by the service provider.

Two separate phone numbers must be

registered on the phone.

Choose netwrk

Network search is restarted. This is

useful if you are not on your home

network or want to register on a dif-

ferent network. The network list is

rebuilt when Auto network is set.

Select line

Select the currently used phone

number.

Display current phone

number.

Protected

Auto network

Activate/deactivate, see also "Choose

netwrk" above. If "Automatic net-

work" is activated, the next network

on the list is dialled in ranking order

of your "preferred networks". Other-

wise a different network can be

selected manually from the list of

the available GSM networks.

(Phone-code protected)

You may limit usage to one phone

number.

Additional information

Special settings may be made for each

phone number (e.g., melody, call divert

etc.) To do this, first switch to the required

phone number.

Pref. network

Enter your preferred service provid-

ers here for when you leave your

home network (e.g. if there are dif-

ferences in price).

Switch from phone number/connection in

standby mode:

Press.

§Line 1§

Press.

Your service provider is displayed:

§List§

Display list of preferred

networks.

Setup

Create/change entry:

User group

<Empty> or select an existing entry,

then select a new service

provider in the list and

confirm.

Depending on service provider, you

can create groups with this service.

These can have access to internal

(company) information, for exam-

ple, or special tariffs apply. The

details can be clarified with your

service provider.

Record new service provider (last

entry in the list):

Furth.network

Active

Select, enter the provider data and

save it.

Activate/deactivate function. "User

group" must be deactivated for nor-

mal phone use.

Additional information

If you are outside your home network, your

phone automatically dials another GSM

network.

If the signal strength of the preferred net-

work is inadequate when you switch on the

phone, the phone may register in a different

network. This can change when the tele-

phone is next switched on or if another net-

work is selected manually.

Select group

You can select or add groups other

than preferred groups (see below).

Code numbers for the groups are

obtained from your service provider.

All outgoing

In addition to network control for a

user group, it is possible to set

whether outgoing calls outside the

group are permitted. If the function

is deactivated, only calls withinthe

group are permitted.

Band selection

Select either GSM 900, GSM 1800 or

GSM 1900. Make sure that your ser-

vice provider supports the selected

band.

Pref. group

If activated, calls may only be made

within this standard user group

(depending on the network configu-

ration).

Fast search

When this function is active, net-

work reconnection is speeded up

(standby time is reduced).

Setup

Automatic settings

Accessories

C _¢¢_ST_ele¢_ctA_fc_uc_ne_cs_ts_io_or_nie_.s

• Permanent illumination:

switched on.

• Key lock: switched off.

Car Kit

• Charging the phone battery.

Only in combination with an original

Siemens handsfree Car kit (see

accessories). The car kit profile is

activated automatically as soon as

the phone is inserted into the cradle.

• Auto. activation of the Car Kit

profile when phone is inserted

in cradle.

Headset

Auto answer

(factory default: off)

Calls are accepted automatically

after a few seconds. Eavesdropping

is possible!

Only in conjunction with an original

Siemens headset (see accessories). If

an original Siemens Headset is used

the profile is automatically activated

when the headset is plugged in.

Auto answer

(factory default: off)

Shown on the display.

Calls are accepted automatically

after a few seconds (except where

the ringer is switched off or set to

beep). You should therefore be

wearing the headset.

Automatic switch off

(factory default: 2 hours)

The phone is powered by the car's

power supply. You can adjust the

time between switching off the igni-

tion and the automatic switching off

of the phone.

Automatic setting

Accept call with Call key or PTT key

(Push To Talk), even when the auto

key lock is activated.

Car loudspk.

Improves playback in certain circum-

stances.

Auto answer

If you do not notice that you phone has

accepted a call, there is the danger that the

caller may eavesdrop.

My menu

Press.

Change menu

§My menu§ Press.

You can replace each entry (1–10)

with another entry from the selec-

tion list.

Create your own menu with fre-

quently used functions, phone num-

bers or WAP pages.

Select the required entry.

The list of 10 entries is preset. You

can, however, change it as you

want.

§Change§ The function list is opened

for selection.

Select the new entry from

the list.

Use

Confirm. The entry is

saved.

Select the required entry.

If Phonebook is selected,

the phone number must

also be selected; if Inter-

net is selected, the book-

mark must also be

Confirm.

If the entry selected is

a phone number, you can

also call it with the Call

key.

selected.

Reset all

(Telephone code required)

§Reset all§ Select. After a safety

query, the pre-assign-

ment is reset.

Fast access key

You can assign one important phone

number of a function to each one of

the two soft keys and number

keys 2 to 9 (speed-dial numbers).

The phone number can then be

dialled or the function can be started

at the touch of a button.

Soft keys

Change

For example, the Internet function is

assigned to the soft key. To change

this (in standby mode):

§Internet§ Press briefly.

§Change§ Scroll to new assignment

in the list.

Service Provider

Confirm.

• Special case Phone number. Pick

out a name from the Phonebook/

Addressbook for assignment to

the key.

01.10.2004

10:10

Internet ì Help

• Special case Bookmark. Scroll to

a URL in the bookmark list for

assignment to the key.

Additional information

The service provider may have already

assigned functions to a soft key (e.g

access to "SIM services" or direct call-up of

the Internet portal). It may not be possible

to modify this key assignment.

Apply

In standby mode:

Application

The "Internet" is just used as an

example here.

The left soft key may sometimes be

replaced automatically by p /À to

access a new message for example.

§Internet§ Press and hold, the appli-

cation is started.

Phone number:

The setting "Carol" is used here only

as an example.

§Carol§

Press and hold, the phone

number is dialled.

100

Fast access key

Apply

Speed keys

Select a stored phone number or

start a stored application (e. g.

Internet).

Number keys 2 to 9 can be used as

speed dialling numbers for fast

access. Number key 1 is reserved for

the mailbox phone number (p. 68)

and number key 0 is reserved for

switching over two connections dur-

ing use (p. 95).

In standby mode:

Press briefly.

The assignment of the number key 3

is displayed above the right soft key

e.g.:

Change

In standby mode:

§Internet§ Press down.

number key briefly press

(e.g. 3).

Or simply

This number is still free:

Press and hold.

§Set§

Press.

Select a new function

from the list and confirm

with §OK§.

An assignment has

already been made to this

key (assignment dis-

played above the right

soft key):

§Change§

Press briefly.

Scroll to application in the

list.

Confirm.

• Special case Phone number. Pick

out a name from the Phonebook/

Addressbook for assignment to

the key.

• Special case Bookmark. Scroll to

a URL in the bookmark list for

assignment to the key.

Organiser

101

Organiser

Daily view

Special displays:

Calendar

C ¢Q¢Calendar

Description of appointment.

Navigation:

You can enter appointments in the

calendar. Time and date must be set

for the Calendar to work correctly.

One day forward/back.

The calendar offers you three views:

To the start/end of the day

or next/last entry.

Monthly view

Special colour coding:

Calendar setup

Day with entries for appointments,

day-long appointments, weekend

C ¢Q¢Calendar setup

Start of day:

Navigation:

Hour when the working day begins.

One day forward/back.

Start of week:

Weekday on which the monthly and

weekly view on the left starts

One week forward/back.

Daily view open.

Set weekend:

Set the days for the weekend.

Weekly view

Special displays:

Show birthdays:

Yes/No.

Appointments are shown as a verti-

cale colour bar on the horizontal

hour division.

Navigation:

One day forward/back.

Forward/backward by the

hour through the day.

102

Organiser

Different input/selection fields are

displayed depending on the type.

The number of fields can be

restricted, see Standard at the end

of the list.

Appointments

C ¢Q¢Appointments

Appointments are displayed in

chronological order in a list.

Description:

Description of appointment.

Enter new appointment

Phone number:

Enter a phone number or select one

from the Addressbook.

Select.

Types:

Memo

Voice memo:

Enter a voice recording, see

Text input for description

Dictat.machine, p. 105.

Voice memo

Location:

Entervoicememo. Shown

with alarm.

Location of appointment.

Call

Whole day:

All-day appointment: Yes/No

Enter phone number to

be displayed with the

alarm.

Start date:

Date when appointment starts.

Meeting

Start time:

Time when appointment starts.

Text input for description

Holiday

End date:

Date when appointment ends.

Enter start and end date.

Birthday

End time:

Time when appointment ends.

Enter name and date.

Organiser

103

Alarm time:

Information on the alarm

When the set date and time are

On/off or Silent alert.

reached there is an audio and a vis-

ual alarm. If an alarm is missed it

appears in the list of missed appoint-

ments (p. 104).

Enter the timespan before

the appointment and

select the time unit:

Minutes, Hours, Days

Alarm type Memo: The text is

displayed.

Reoccurrence:

Select a timeframe for repeating the

appointment:

Alarm type Meeting: The text is shown

in the display.

No, Daily, Weekly, Monthly, Yearly

Enter a parameter for repeating:

Forever, Until, Occurrences (number)

Alarm type Call: The phone number

is displayed and can be dialled

immediately.

Alarm type Birthday: You can send

special birthday greetings by SMS,

MMS, e-mail or a call via §Options§.

If Weekly is selected, certain week-

days can be highlighted.

Standard

With Snooze you can set a repetition

of the alarm.

In the list, select those fields which

are to be offered for future entries.

Additional information

Display above set alarms:

Tasks

C ¢Q¢Tasks

Alarm clock.

A task is displayed like an appoint-

ment in the agenda of the selected

day. However, unlike an appoint-

ment it does not require a time.

When no time is entered the task

appears at the top of the list every

day until it is marked as completed.

Appointment.

An alarm sounds even when the phone is

switched off (except in Aircraft mode,

p. 76). The phone does not go to standby

mode. To deactivate it press any key.

The entries are made in the same

way as Appointments, see this sec-

tion. Then:

104

Organiser

Status:

Missed appts.

Choose between: Done or Outstanding

C ¢Q¢Missed appts.

Priority:

Events with an alarm (Appointments,

Tasks) to which you have not reacted

are listed for reading.

Selection in 5 levels of Lowest bis

Highest.

Use date

If activated with Yes, the following

time-input option is offered.

Organiser options

Depending on the application used

(Calendar, Appointments, Tasks, Notes)

and the current situation, different

functions are offered.

Due date:/Expiry time:

Enter the date and time by when the

task is to be completed.

Alarm: and Standard as for Appoint-

§Options§ Open menu.

ments.

Delete until

Delete all entries prior to

a certain date.

Notes

Delete done

Delete all completed

tasks.

C ¢Q¢Notes

Write and manage brief text notes.

Protect confidential information

using a phone code.

Activate/

Deactivate

Switch alarm on/off.

Confidential

Protect note with phone

code. We recommend that

you do not store any pass-

words (PIN, TAN etc.) as

notes.

Enter a new memo

Write a normal note.

(For standard functions see p. 15)

Write a confidential note.

The phone code is

required.

Enter text. The first line is

displayed later as a "title"

in the notes list.

§Options§ Open menu.

Save

Save note.

Organiser

105

Pause/recording

alternately.

Dictat.machine

C ¢Q¢Dictat.machine

End recording.

Use the dictating machine to record

short voice memos.

The recording is automat-

ically saved with a time

stamp. Rename with

§Options§.

• Use your phone as a dictating

machine when on the move.

• Record a memo as a reminder or

as a note for others.

Playback

Select the desired

recording.

• Add a voice memo to an appoint-

ment in the Calendar.

Playback/pause,

alternately.

• Record a call.

D E

Warning!

Press and hold rapid

rewind and fast forward.

The use of this feature may be subject to

restrictions under criminal law.

Dictating machine options

§Options§ Open menu.

Please inform the other party to the

conversation in advance if you want to

record the conversation and please keep

such recordings confidential.

You may only use this feature if the other

party to the conversation agrees.

Loudspeaker

Playback via the built-in

loudspeaker.

(For standard functions see p. 15)

New recording

Select.

The remaining time avail-

able as well as the record-

ing time are shown in the

display.

A brief tone sounds when

the recording starts. Now

say the text.

106

Organiser

Time zone options

Time zones

§Options§

Open menu.

C ¢Q¢Time zones

Set

Specify the time zone.

The time zone can be selected in the

world map or a city list:

Auto time

The time zone is switched

automatically to local time

by the network.

zone

World map

Select the desired

recording.

Search city

Help

Search for a city.

City list

Operating instructions.

Select a city in the

selected time zone.

Extras

107

Extras

Preparing a session

Walky Talky

This application can be used to

simultaneously connect multiple

subscribers. Like a normal Walky

C ¢ ¢Walky Talky

Select.

Talky, only one subscriber can speak

at a time. The others can only listen

until the speaker allows others to

talk.

The possible functions as well as

already added subscribers are

displayed.

A recipient is selected using their

Walky Talky address (WT ID) or their

phone number. Groups created in

advance (p. 110) can be invited to

a session. Your service provider will

supply you with your own WT

address.

You have several options to combine

the subscribers:

Search and mark recipient

in Addressbook.

Add recipient.

The recipient can also use a mobile

phone, as well as a PC with an

Internet connection and headset

(depending on service provider).

Select a subscriber from

an earlier session.

To use the application, GPRS (p. 89)

must be switched on and Walky Talky

(p. 111) activated.

Enter WT ID of a recipient.

Add entries.

§Select

108

Extras

Additional information

Depending on the setting for Hold mode

(p. 112)

must be pressed and held as

Select group.

long as one speaks.

If the person with speaking rights takes

a long pause, the speaking rights are

automatically released again.

Open

Select and mark recipient.

Add recipient.

§Select

Inviting additional subscribers

You can invite additional subscribers

during a session.

Starting a session

If all the desired subscribers are

combined, start the session:

§Options§ Open menu, select Invite

and mark new subscribers.

The subscribers are dis-

played, and the author-

ised speaker is shown in

bold.

You are being invited

The invitation is shown in a window.

You can accept or refuse this

invitation.

Speaking rights

The list of subscribers is displayed.

The current authorised speaker is

shown in bold.

Accept the invitation.

The list of subscribers is displayed.

Request speaking rights.

Leaving the session and ending

Only if you yourself started the

session.

The delegation of speak-

ing rights is displayed and

then the requester can

talk.

§Options§ Open menu.

Quit session

Returning speaking

rights.

Select. You will leave and

end the current session.

Extras

109

Letting the session run in the

background

Clear

Delete the list except for

the last entry.

The current session remains active in

the background. A phone call ends

the session.

Handsfree

Switch on handsfree

talking (loudspeaker).

Request

pres.

Request information

about the readiness to

receive for a subscriber.

Putting Walky Talky in the background

Press and hold.

Volume

Set volume. I is also

possible.

Using Walky Talky again

(For standard functions see p. 15)

C¢ ¢Walky Talky

Sessions Continue session again.

Sessions

C ¢ ¢Walky Talky¢Sessions

Walky Talky options

§Options§ Open menu.

Display subscriber list for the current

session. The authorised speaker is

shown in bold.

Different functions are offered

depending on the situation.

History view

Session view

Quit session

Display of subscribers in

order of speaking.

Display of subscribers for

the current session.

End session.

Session

details

Start time, Status,

Duration, Type etc.

User details

Display subscriber

properties (see also

My presence, p. 111).

Add to d

Save WT ID in

Addressbook.

Invite user

Add to group

Invite a subscriber to

a session.

Add subscriber to the

group.

110

Extras

Membership:

Set if membership in this

Records

C¢ ¢Walky Talky¢Records

group is open to everyone

(Open) or if the subscriber

is limited to the member

list (Restricted).

Select the list of received and made

WT calls as well as the option to

delete all lists.

Memberlist Add member to the

You can mark subscribers for one

session in the list.

group.

Rejectlist List of subscribers which

may not become mem-

bers of this group.

Start session.

The function Create as group in

§Options§ can be used to combine

entries in the list into a new group.

§Save§

Save group.

List of subscribers with whom

a session is not desired. Invitations

from this list are always refused

automatically.

Groups

C¢ ¢Walky Talky¢Groups

Only your groups are displayed and

can be edited.

List of subscribers whose invitation is

automatically accepted (see also

Auto answer p. 111).

Setting up a new group

Select.

Starting a session (group conversation)

Fill in input fields:

Select group.

Walky Talky ID:

Start session.

Subscriber ID.

Name:

Group name.

Type

Instant or Chat.

Max. users:

Maximum number of

group members ("0"

means "no limit").

Extras

111

Viewing group properties

Settings

Select group.

C¢ ¢Walky Talky

¢Settings

View properties.

Some settings must be made by the

user or can be copied from your

service provider.

§Options§ Open menu.

Add to d

Copy group ID to the

Addressbook.

Select and confirm the

function, area.

Edit

Edit (your own) group.

Dwnl. settings

Download settings from the server

of the service provider.

Copy ID to clip

Save group ID (WT ID)

in the clipboard.

Memberlist

Rejectlist

Display the member list.

WT online

Display the refused

subscribers.

Block WT calls

Allow/block Walky Talky calls.

My presence

C _¢¢_{Presence¢My presence}

¢Walky Talky

Auto answer

Automatically accept invitations

because of the Acceptlist (p. 110).

The following properties (yours) can

be set:

Use Acc.& Rej.

Activate/deactivate the use of

Acceptlist/Rejectlist p. 110/p. 110).

Interruption

Allow, forbid interruption

Mood

Notes

Display your mood.

Note.

Walky Talky

• WT enabled

Activate/deactivate Walky Talky.

• History length:

Number of entries in the list.

• Timeout(min.):

Walky Talky is put in the

background if not used after an

adjustable amount of time.

112

Extras

• Hold mode

SIM services (optional)

_{Depending on the setting,}A

must be pressed and held to

speak.

C ¢ ¢SIM services

Your service provider may offer spe-

cial applications such as mobile

banking, share prices, etc. via the

SIM card.

• Default view

Session view or History view.

• Request pres.

The saved properties are

displayed.

If you have such a SIM card, the

SIM services will appear in the main

menu under "Extras" or directly

above the soft key (on the left).

Server

Settings for the server. Please check

with your service provider.

Symbol for SIM services.

Advanced

Further settings. Please check with

your service provider.

Where there are several applications,

these are displayed in a SIM services

menu. With the SIM services menu,

your phone can support future addi-

tions in your service provider's user

package. For further information,

please contact your service provider.

Additional information

If an accessory such as the car kit is

connected, its PTT key also functions as

a WT-key.

Alarm clock

C ¢ ¢Alarm clock

The alarm will ring at the time set by

you, even when the phone is

switched off.

Activate/deactivate the

alarm.

Switch to time setting.

Extras

113

Set alarm call time

(hh:mm).

Sound recorder

Use the sound recorder to record

noises and tones for use as ring

tones. The tone recording is nor-

Switch to the week days.

Navigate to the various

days.

mally started by other applications/

functions such as "assign ring tone".

Display options: alarm call

time and days.

New recording

Start from main menu

Alarm clock

C ¢ ¢Sound recorder

Select.

§On§

The remaining time avail-

07:30

able as well as the record-

ing time are shown in the

display.

Mo Tu We Th Fr Sa Su

Start it from another application

as follows

Edit ì

Set days for alarm calls.

Press again to delete the

highlighting.

The recording display appears:

A brief tone sounds when

the recording starts.

Press and hold to highlight/

unhighlight all the days.

Pause/record alternately.

§OK§

Confirm setting.

End recording.

The recording is saved

with a timestamp in the

folder Sounds. Rename

with §Options§.

Additional information

Screen display in standby

mode: alarm clock activated.

With Snooze you can set the alarm to

repeat.

§Insert§

Transfer recording into

the application.

114

Extras

Playback

Calculator

Select the desired

recording.

C ¢ ¢Calculator

The calculator can be used in a basic

version and with an advanced range

of functions. The input line and two

calculation lines (including the

matrice with the calculation func-

tions) are located in the top display

half.

Playback/pause,

alternately.

D E

Press and hold rapid

rewind and fast forward.

§Options§ Open menu.

Loudspeaker

Playback via the built-

in loudspeaker.

Enter number(s).

Set as...

Set the recording as

a ringtone.

Navigate functions.

Use function. The result is

calculated and displayed

immediately.

(For standard functions see p. 15)

Basic functions:

+, -, *, /

Basic calculation types.

Result.

1/x

Conversion

Convert to percentage.

Decimal point.

Sign change "+" / "–"

§Options§ Expansion of the range of

functions:

Square root

Square

Exponent.

M+

save displayed number.

Call up saved number.

Insert number from memory.

Extras

115

Example of type Velocity units:

Calculator options

§Options§ Open menu.

Type

Units

Velocity

Kilometres/h, Metres/sec,

Miles/h, Miles/sec, Knots,

Mach

Convert

Call up the unit con-

verter with the current

result.

Clear all

Delete all units.

Convert

Extended mode/

Basic mode

Convert calculation

functions.

Select the source unit/

currency.

(For standard functions see p. 15)

Switch to the input field.

Enter the quantity to be

converted.

Unit converter

C ¢ ¢Unit converter

Switch to the selection

field.

You can convert various measure-

ment units into other measurement

units.

Select the target meas-

urement unit / currency

The result is displayed.

The following types are offered with

various units:

You can use both input fields alter-

nately.

Velocity

Energy

Mass

Special key functions:

Pressure

Time

Volume

Area

Length

Power

Temperature

Currency

Set decimal point.

Change prefix.

Currency

When you call up the function, you

must enter a basic currency into

which the conversions are to be

made.

Enter currency

(e. g. euro)

§Save§

Store entry.

116

Extras

Now enter the name and exchange

rate of the currency to be converted.

Countdown

C ¢ ¢Countdown

§Options§ Open menu.

A set time elapses. The last

Add currency

Set as base

Edit rate

Enter new currency and

exchange rate.

3 seconds are indicated by a beep.

At the end a special beep sounds.

Use entered currency as

basic currency.

Display, also in standby mode.

If no time has been enetered:

Change the exchange

rate of the basic currency.

Open input window

Calc.

Start calculator.

§Edit§

Activate input field.

Set period of time.

Confirm.

(For standard functions see p. 15)

§OK§

Stopwatch

Start.

C ¢ ¢Stopwatch

Two intermediate times can be

recorded and saved.

If a countdown time is specified:

Start countdown.

Display, also in standby mode.

While the time is elapsing:

Start/stop.

Interrupt counter.

Save intermediate time.

Let counter continue

running.

After a stop:

Reset to zero.

§Reset§

Reset counter to starting

time.

Stopwatch options

§Options§ Open menu.

Stopwatch

list

Display saved entries.

(For standard functions see p. 15)

Extras

117

Server sett.

Providers

Remote synchronisation

Display the current service

provider.

C ¢ ¢Remote syncr.

You can use this function remotely

to access externally filed data

(addresses, calendar, etc.) and syn-

chronise these with the data on your

phone. The data can, for example,

be saved on a company computer or

in the Internet.

Homepage

e.g.

www.siemens-mobile.com

Port:

Enter port number, e.g. 80.

Enter user name (Login

name).

www.siemens-mobile.com/syncml

Password:

Enter password (shown as a

series of asterisks).

Syncronise

Calendar

path

Contacts

path

Notes path

Task path

§Sync§

The computer is selected

and synchronisation

started. When completed,

the actions which have

been performed are dis-

played.

HTTP

authenti-

fica.:

Confirmation required; Yes/

No (if No, the input fields are

not visible).

§Next§

Scroll through the various

displays.

Sync. setting

The following settings can be made

prior to synchronisation:

HTTP

Enter name.

name:

HTTP

password:

Enter password.

Sync. profile

You can choose between 5 profiles.

Select profile.

Activate profile.

§Edit§

Set profile

118

Extras

Last sync:

Device manag.

Time of the last synchronisation.

C¢ ¢Device manag.

Sync. mode

• Sync data: Modified data or All data

If you were informed about software

updates by a push message, you can

establish a connection to the

• Sync direction: Two-way,

Mobile update or Server update

provider's server using the Device

manager, so you can download

them. When downloading is

finished, you will be asked to switch

the phone off and on again.

Afterwards, the software of your

phone will be updated. Please follow

the instructions in the display.

Date range

Select On/off

Enter the time in weeks in which

entries (past and future) are to be

synchronised.

Sync items:

The phone default setting varies

from service provider to service

provider:

Highlight database areas to be

synchronised:

Calendar

Addressbook

Notes

• The settings have already been

implemented by the provider. You

can start immediately.

Tasks

• Access profiles have already been

created by your provider. Then

select and activate profile.

Save settings.

• The access profiles must be

configured manually. If necessary,

check with your service provider

for details. You will find the

current settings for the service

provider on the Internet at

www.siemens-mobile.com/

mobilescustomercare

under "FAQ".

Extras

119

Active profile

A standard profile for downloading

the current software of the

operating system is displayed.

§Sync§

Establish a connection to

the active profile.

§Edit§

Call up profile list.

Select profile.

Activate profile.

§Edit§

Set profile.

Last connect.

Display last connection.

120

Media player

Melodies/video

The media playback offers the fol-

lowing functions for melody and

video playback:

Media player

When you are viewing a picture/

video or listening to a melody, the

application starts a media playback.

Play or pause, depending

on the situation.

Scroll to the next media

file.

Set volume.

§Stop§

Pictures

The following functions can be

applied to a displayed picture:

Mute.

Stop function.

End playback.

Zoom function if the dis-

played picture has a

higherresolutionthan the

display. The two soft keys

(+/–) enlarge/reduce the

picture. The joystick

Options

§Options§ Open menu.

Different functions are offered

depending on the starting situation

and the object.

moves the picture detail.

5 Centre the picture.

Switch to full-picture

mode and back again.

0 ^-9

Volume

Set the volume with the

joystick.

Switch on display illumi-

nation (only in full screen

mode).

Set as...

Set picture as Wallpaper,

Logo for example, and

sounds for Incoming call,

Startup melody, for

example.

§Send§

e.g. send via MMS or

e-mail.

Slideshow

Edit

Automatic run-through in

full-picture mode. Individ-

ual picture connection with

joystick.

Access to picture proces-

sing (application must be

loaded).

(For standard functions see p. 15)

My stuff

121

My stuff

To organise your files, you can use

the file system like a PC file manager.

There are some folders in My stuff for

the various data types for this pur-

pose.

Own file options

§Options§ Open menu.

Move

Copy

Paste

Place highlighted file(s)

or folder in temporary

memory.

Remember that pictures and sounds

may be protected (DRM, p. 13).

Place highlighted file(s)

or folder in temporary

memory.

C ¢N

The list of the folders and files is dis-

played.

Transfer content of tem-

porary memory into cur-

rent folder.

Navigation

Select file/folder in lists.

New folder

Thumbn. view

Attributes

Create a new folder and

name it.

The cursor can be moved

freely in the preview.

Switch over to miniature

view.

Open folder or start file

with related application

Display information on

file or folder selected.

The application for the folder cur-

rently selected is loaded.

(For standard functions see p. 15)

The WAP browser is started and the

download page displayed.

122

My stuff

Depending on the service provider, the

structure, content and functionality of My

stuff may vary.

Index structure

Some folders have already been cre-

ated for different data types in My

stuff. These folders cannot be

changed.

Folder

Description

Format

Pictures

bmp

bmx

jpg/jpeg

png

Pictures

gif

Videos

3gp

Videos

Animations

bmx

gif

Switch on/off

animations

Sounds

Themes

mid

amr

wav

Melodies

sdt

Loaded theme

(zipped)

stc

Theme

configuration

(unzipped)

Skins

scs

Loaded user

interfaces.

Games

jar

Java archive

jad

Download info

Applications

Applications,

such as Photo

Editor or

Download

Assistant.

Misc.

html

wml

Internet sites.

Mobile Phone Manager

123

Mobile Phone Manager

The Windows® PC program, MPM

(Mobile Phone Manager) enables

you to use extended phone func-

tions from your PC. Among other

things, you can easily manage your

phone’s Addressbook, as well as

read, store and send SMS and EMS

messages. The phone and PC com-

municate via IrDA or a data cable

(See Accessories, p. 133).

SMS and EMS management

Write EMS and SMS messages from

the convenience of your PC. Use all

the options your PC offers you and

use your sounds and pictures to cre-

ate SMS and EMS messages. You can

read, forward, print, delete and

archive your messages.

Backup and restore

You can download the software

from the Internet:

www.siemens-mobile.com/cx70

Contacts Management

With the back-up function, you can

regularly make a back-up copy of

your phone data on the PC. If you

ever lose the data on your phone or

replace the phone, you can quickly

re-instate all data with the restore

function. Please observe any possi-

ble restrictions for DRM-protected

data.

You can use contacts management

to manage the personal contacts you

have stored in your phone, to add

new ones and to delete and edit

them. You can compare and copy

contacts between your phone, Out-

look®, Lotus Notes™ and other Sie-

mens phones (including Gigaset).

124

Mobile Phone Manager

Bookmark Management

Processing pictures and photos

Use your PC to browse on the Inter-

net and define your preferred Inter-

net sites. Save the Internet addresses

as bookmarks on your phone so that

you can quickly call them up at

a later time when you are on the

move.

Picture/photo processing offers you

the opportunity to conveniently cre-

ate, edit and manage pictures and

photos. Filters and effects are

offered to help you create colourful,

attractive graphics. The user-friendly

interface makes child’s play of trans-

ferring pictures/photos from or to

the mobile phone, and of changing

the graphic settings.

Phone explorer

Ringtone Management

You can use the phone explorer to

read your phone’s file system. Files

such as pictures, sounds and much

more can easily be copied between

the phone and PC by dragging and

dropping.

The sound module allows you to

manage nearly all sound formats

easily and to save them on the

phone. This phone does not support

MP3 functionality.

GPRS modem

The GPRS modem establishes an

Internet connection via your mobile

phone so that you can surf the Inter-

net on your laptop while on the

move and at the touch of a button.

Questions & Answers

125

Questions & Answers

If you have any questions about using your phone, visit us at

www.siemens-mobile.com/mobilescustomercare anytime. For additional help, we have

listed below some frequently asked questions and answers.

Configuration service

To help you set up your mobile phone for the data service WAP, MMS, e-mail and Internet,

you can use a configuration service. This service is used to have the necessary settings for

your mobile phone sent to you by SMS. We recommend that you contact your network

provider who will send you the configuration messages.

As an alternative you can also use the "Setting Configurator" at

www.siemens-mobile.com/mobilescustomercare. Siemens will then send you the

configuration messages. Please follow the instructions contained in those messages.

Problem

Possible causes

Possible solution

Phone cannot be

switched on.

On/Off key not pressed long

enough.

Press On/Off key for at least two seconds.

Flat battery.

Charge battery. Check charging indicator in the dis-

play.

Battery contacts dirty.

Clean contacts.

See also below under “Charging

error”

Too little standby

time.

Frequent use of organiser and Restrict use if necessary.

games.

Fast search activated.

Display illumination on.

Unintentional keystrokes

(illumination!).

Deactivate speed search(p. 96).

Switch off display illumination (p. 80).

Activate key lock (p. 93).

Charging error

(charge icon not

displayed).

Battery totally discharged.

1) Plug in charger cable, battery is on charge.

2) Charge icon appears after approx. 2 hours.

3) Charge battery.

Temperature out of range:

+5 °C to +45 °C.

Make sure the ambient temperature is right, wait for

a while, then recharge.

Contact problem.

Check power supply and connection to the phone.

Check battery contacts and telephone connection

socket, clean them if necessary, then insert battery

again.

No mains voltage.

Use different mains power socket, check mains

voltage.

Wrong charger.

Battery faulty.

Only use original Siemens accessories.

Replace battery.

126

Questions & Answers

Possible causes

Problem

Possible solution

SIM error.

SIM card not inserted correctly. Check that the SIM card is inserted correctly (p. 9).

Dirty SIM card contacts.

SIM card with wrong voltage.

Clean SIM card with a dry cloth.

Use 3V SIM cards only.

SIM card damaged

(e.g. broken).

Carry out a visual check. Change SIM card at serv-

ice provider.

No network connec- Weak signal.

Move higher, to a window or an open space.

Check service provider's coverage area.

Complain to the service provider.

tion.

Outside GSM range.

Invalid SIM card.

New network not authorised.

Try manual selection or select a different network

(p. 95).

Network call barring is set.

Network overloaded.

Signal too weak.

Check network barrings (p. 94).

Try again later.

Reconnection to another service provider is auto-

matic (p. 95). Switching phone off and on again can

speed this up.

Phone loses net-

work.

Calls not possible. Second line set.

New SIM card inserted.

Set first line \ (p. 96).

Check for new barrings.

Reset limit with PIN 2 (p. 39).

Load credit.

Charge limit reached.

Credit used up.

Certain uses of

phone not possible.

Call restrictions are in place.

Barrings can be set by service provider.

Check barrings (p. 94).

Impossible to make Phonebook/Addressbook is full. Delete entries in Phonebook /Addressbook (see

entries in Phone-

Standard functions, p. 15).

book/Addressbook.

Voice message not Call divert to mailbox not set.

functioning.

Set call divert to mailbox (p. 68).

flashes to indi- SMS memory is full.

cate an SMS.

Delete (see Standard functions, p. 15) or file SMS

(p. 46).

flashes to indi- MMS memory full.

cate an MMS.

Delete MMS (see Standard functions, p. 15).

flashes to indi- Phone memory full.

cate an MMS.

Delete messages, pictures, videos, games or appli-

cations.

Function cannot be Not supported by service pro- Contact your service provider.

set. vider or registration required.

Capacity problems Phone memory full.

with, for example,

Delete files in the relevant areas. You can use the

memory assistant to delete specific files (p. 86).

Games & More, ring-

tones, pictures, vid-

eos, SMS archive.

Questions & Answers

Possible solution

127

Problem

Possible causes

No WAP access,

downloading not

possible.

Profile not activated, profile set- Activate or set WAP profile (p. 72). If necessary ask

tings wrong/incomplete. your service provider.

Text message can- Service provider does not sup- Contact your service provider.

not be sent.

port this service.

Phone number for service cen- Set service centre (p. 47).

tre not set or incorrectly set.

SIM card contract does not sup- Contact your service provider.

port this service.

Service centre too busy.

Recipient does not have a

compatible phone.

Repeat message.

Check.

EMS pictures &

Destination phone does not sup-

sounds are not dis- port the EMS standard.

played at the desti-

nation phone

No Internet access Incorrect WAP profile set, or

Check WAP settings; (p. 72) contact your service

possible.

wrong or incomplete settings. provider if necessary.

PIN error/

PIN2 error.

Three wrong entries.

Enter the PUK (MASTER PIN) supplied with the

SIM card according to the instructions. If the PUK

(MASTER PIN) has been lost, please contact your

service provider.

Phone code error. Three wrong entries.

Contact Siemens Service (p. 128).

Service provider

Code error.

No authorisation for this service. Contact your service provider.

Too few/too many

menu entries.

Functions may have been

added or deleted by the service

provider via the SIM card.

Check with your service provider.

No fax possible.

Wrong settings in the PC.

Check settings (p. 91).

No authorisation for this service. Contact your service provider.

Charge meter does Charge pulse is not transmitted. Contact your service provider.

not work.

Damage

Severe shock.

Remove battery and SIM and re-insert them. Do not dismantle the phone!

Phone became wet. Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry

connector contacts thoroughly. Stand mobile upright in an air current. Do not disman-

tle the phone!

Reset all settings to factory default p. 87: # 9 9 9 9 #

128

Customer Care

Austria.............................................05 17 07 50 04

Bahrain .................................................... 40 42 34

Bangladesh.......................................0 17 52 74 47

Belgium.............................................0 78 15 22 21

Bolivia ...............................................0 21 21 41 14

Bosnia Herzegovina..........................0 33 27 66 49

Brazil............................................0 80 07 07 12 48

Brunei ................................................. 02 43 08 01

Bulgaria............................................... 02 73 94 88

Cambodia ........................................... 12 80 05 00

Canada ........................................1 88 87 77 02 11

China ...........................................0 21 38 98 47 77

Croatia ..............................................0 16 10 53 81

Czech Republic.................................2 33 03 27 27

Denmark ............................................. 35 25 86 00

Dubai ................................................0 43 96 64 33

Egypt.................................................0 23 33 41 11

Estonia................................................ 06 30 47 97

Finland............................................09 22 94 37 00

France.............................................01 56 38 42 00

Germany *....................................0 18 05 33 32 26

Greece............................................80 11 11 11 16

Hong Kong.......................................... 28 61 11 18

Hungary ..........................................06 14 71 24 44

Iceland .................................................. 5 11 30 00

India.............................22 24 98 70 00 Extn: 70 40

Indonesia .....................................0 21 46 82 60 81

Ireland.............................................18 50 77 72 77

Italy .................................................02 24 36 44 00

Ivory Coast.......................................... 05 02 02 59

Jordan...............................................0 64 39 86 42

Kenya.................................................... 2 72 37 17

Kuwait................................................... 2 45 41 78

Latvia .................................................... 7 50 11 18

Lebanon.............................................. 01 44 30 43

Libya ...............................................02 13 50 28 82

Lithuania ...........................................8 52 74 20 10

Luxembourg........................................ 43 84 33 99

Macedonia .......................................... 02 13 14 84

Malaysia....................................+ 6 03 77 12 43 04

Malta .......................................+ 35 32 14 94 06 32

Mauritius ............................................... 2 11 62 13

Mexico .......................................01 80 07 11 00 03

We offer fast, individual advice! You have

several options:

Our online support on the Internet:

www.siemens-mobile.com/

mobilescustomercare

We can be reached any time, any place.

You are given 24 hour support on all

aspects of our products. Here you will find

an interactive fault-finding system, a com-

pilation of the most frequently asked ques-

tions and answers, plus user guides and

current software updates to download.

When calling customer service, please

have ready your receipt and the phone

identity number (IMEI, to display press

#06#), the software version (to display,

press #06#, then §More§) and if available,

your Siemens Service customer number.

You will also find the most frequently

asked questions and answers in the sec-

tion entitled "Questions & Answers" in this

user guide on p. 125.

You can also get personal advice about our

range of products on our Premium Hotline:

United Kingdom ............................ 0906 9597500

(0.75 £ per minute)

Qualified Siemens employees are waiting to

offer you expert information about our

products and installation.

In some countries repair and replace serv-

ices are impossible where the products are

not sold through our authorised dealers.

If repair work is necessary, please contact

one of our service centres:

Abu Dhabi.........................................0 26 42 38 00

Argentina .....................................0 80 08 88 98 78

Australia..........................................13 00 66 53 66

* 0,12 Euro/min.

Customer Care

129

Morocco...............................................22 66 92 09

Netherlands .................................0 90 03 33 31 00

New Zealand...................................08 00 57 43 63

Nigeria ..............................................0 14 50 05 00

Norway.................................................22 70 84 00

Oman....................................................... 79 10 12

Pakistan..........................................02 15 66 22 00

Paraguay ..........................................8 00 10 20 04

Philippines ........................................0 27 57 11 18

Poland.............................................08 01 30 00 30

Portugal ............................................8 08 20 15 21

Qatar....................................................04 32 20 10

Romania .........................................02 12 04 60 00

Russia..........................................8 80 02 00 10 10

Saudi Arabia .....................................0 22 26 00 43

Serbia .............................................01 13 07 00 80

Singapore ............................................62 27 11 18

Slovak Republic ..............................02 59 68 22 66

Slovenia............................................0 14 74 63 36

South Africa ....................................08 60 10 11 57

Spain.................................................9 02 11 50 61

Sweden.............................................0 87 50 99 11

Switzerland .....................................08 48 21 20 00

Taiwan ............................................02 23 96 10 06

Thailand............................................0 27 22 11 18

Tunisia .................................................71 86 19 02

Turkey..........................................0 21 65 79 71 00

Ukraine ........................................8 80 05 01 00 00

United Arab Emirates........................0 43 66 03 86

United Kingdom ...........................0 87 05 33 44 11

USA .............................................1 88 87 77 02 11

Vietnam...........................................84 89 30 01 21

Zimbabwe ............................................04 36 94 24

130

Care and maintenance

Your phone has been designed and

manufactured to the highest of

standards and should be treated

with great care. The suggestions

below will help you to enjoy your

phone for many years.

• Do not drop, knock or shake your

phone. Rough handling can dam-

age internal circuit boards!

• Do not use harsh chemicals, clean-

ing solvents, or strong detergents

to clean the phone!

• Protect your phone from moisture

and humidity! Precipitation,

The suggestions given above apply

equally to your phone, battery,

charger and all accessories. If any of

these parts are not working properly,

take them to your nearest qualified

service outlet. The personnel there

will assist you and, if necessary,

repair the device.

humidity and liquids contain min-

erals that will corrode electronic

circuits. Should your phone none-

theless become wet, disconnect it

immediately from any power sup-

ply, remove the battery and leave

the open phone to dry at room

temperature!

• Do not use or store the phone in

dusty, dirty areas. Its moving parts

may become damaged.

• Do not store your phone in hot

areas. High temperatures can

shorten the life of electronic

devices, damage batteries and

warp or melt certain plastics.

• Do not store your phone in cold

areas. When the phone warms up

again (to its normal ambient tem-

perature), moisture can form

inside the phone, which may dam-

age electronic circuit boards.

Product data

131

Phone ID

Product data

You will need the following details if you

lose your phone or SIM card:

the number of the SIM card (on the card):

..............................................................

15 digit serial number of the phone

(under the battery):

Declaration of conformity

Siemens Information and Communication

mobile hereby declares that the phone

described in this user guide is in compliance

with the essential requirements and other

relevant provisions of European Directive

1999/5/EC (R&TTE). The declaration of con-

formity (DoC) concerned has been signed.

Please call the company hotline if you

require a copy of the original, or:

..............................................................

the customer service number of the service

provider:

..............................................................

www.siemens-mobile.com/conformity

Lost phone

If you lose your phone or SIM card contact

your service provider immediately to pre-

vent misuse.

Technical data

Operating time

GSM class:

Frequency range: 880–960 MHz

GSM class: 1 (1 watt)

Frequency range: 1,710–1,880 MHz

GSM class: 1 (1 watt)

Frequency range: 1,850–1,990 MHz

4 (2 watt)

The operating time depends upon

the respective conditions of use:

Extreme temperatures considerably

reduce the phone’s standby time.

Avoid placing the phone in the sun

or on a heater.

Call time: 100 to 330 minutes

Standby time: 60 to 300 hours

Weight:

Size:

90 g

101x46x18 mm

(78 ccm)

Action taken

Time Reduction of

(min) stand-by time by

Li-Ion battery:

750 mAh

Calling

30–90 minutes

40 minutes

Operating

temperature:

Light *

–10 °C… +55 °C

3.0 V

Network search

5–10 minutes

SIM card:

* Key input, games, organiser etc.

The SAR value specified on p. 138 does not

apply to phones equipped with "Emoty

CLIPit™ Cover“ (p. 72) or other CLIPit™

covers.

132

Quality

Battery quality statement Display quality declaration

The capacity of your mobile phone

battery will reduce each time it is

charged/emptied. Storage at too

high or low temperatures will also

result in a gradual capacity loss. As

a result the operating time of your

mobile phone may be considerably

reduced, even after a full recharge of

the battery.

For technological reasons, a few

small dots with different colours

may appear in the display in

exceptional cases.

Just remember that the appearance

of brighter or darker dots generally

does not mean that a fault has

occurred.

Regardless of this, the battery has

been designed and manufactured so

that it can be recharged and used for

six months after the purchase of

your mobile phone. After six

months, if the battery is clearly suf-

fering from loss of performance, we

recommend that you replace it.

Please buy only Siemens original

batteries.

Accessories

133

Accessories

Fashion & Carry

Handsfree Portable

CLIPit™ Covers

Headset Basic HHS-500

Changeable top shells as well as keyboards

area available in specialist shops. Alterna-

tively, you can visit our online shop.

Headset without keys; accepting and ending

calls is done using the phone.

Headset HHS-510

Headset with key to accept and end calls.

Headset Purestyle HHS-610

Carrying Cases

A range of carry cases is available at spe-

cialist shops or you can visit the Siemens

Mobile Store online:

High quality headset with button for

accepting and ending calls. An ear hook

which can be adjusted for the left or the right

ear, makes it more comfortable to wear.

Original Siemens Accessories

www.siemens-mobile.com/

shop

USB DCA-510 data cable

For connecting the phone to the USB port of

the PC. With load function.

Energy

Office

Li-Ion Battery (750 mAh) EBA-660

Spare battery.

Data Cable DCA-500

For connecting the phone to the serial

RS232 port of the PC.

Travel Charger

Travel Charger EU ETC-500

Travel Charger UK ETC-510

USB DCA-510 data cable

For connecting the phone to the USB port of

the PC. With load function.

Travel charger with an extended input volt-

age range of 100–240 V.

Data Cable USB DCA-540

Car Charger Plus ECC-600

For connecting the phone to the USB port of

the PC. With load function.

Charger for the cigarette lighter socket in

the car. It is possible to make telephone calls

during charging.

SyncStation DSC-600

Table support for the telephone to facilitate

simultaneous data exchange and telephone

charging. Contains a desktop stand and

a USB data cable.

134

Accessories

Multitainment

Car Solutions

Emoty CLIPit Cover

Mobile Holder HMH-680

Cradle without antenna port.

Mobile Holder HMH-685

The cradle for connecting an external

antenna. Ideal for use with headset PTT or

car kit portable.

This cover is used to "transfer" your

emotions to animated figures via the

integrated pressure, touch, and vibration

sensors. The animations can then be sent as

normal MMS and received from any MMS

compatible phone.

Can also be used as cradle for retrofitting

your handsfree car kit (series 55).

Plug-in Flash IFL-600

Plug-in flash module for taking photos in

areas with low ambient light.

Car Kit Comfort HKC-680

Handsfree kit with first-class digital call qual-

ity and supreme ease of use. Includes all

components needed for installation. The

individual antenna solution is available in

specialist shops.

Car Kit Easy HKP-600

Facilitates convenient handsfree talking with

high call quality. With the integrated, rotating

cradle and the flexible microphone position-

ing, the telephone can be optimally adjusted

to suit any vehicle interior. The power is sup-

plied via the cigarette lighter socket.

Optional Car Kit accessories

Car Data Adapter HKO-690

Phone-In Adapter Cable HKO-570

Products can be obtained in specialist shops

or you can visit the Siemens Mobile Store

online:

Original Siemens Accessories

www.siemens-mobile.com/

shop

Guarantee certificate (UK)

135

Guarantee certificate (UK)

Without prejudice to any claim the user (cus-

tomer) may have in relation to the dealer or

retailer, the customer shall be granted a

manufacturer's Guarantee under the condi-

tions set out below:

• This Guarantee shall apply to new devices

purchased in the European Union. For

Products sold in the United Kingdom the

Guarantee is issued by Siemens plc,

Siemens House, Oldbury, Bracknell,

Berkshire, RG12 8FZ.

• In the case of new devices and their com-

ponents exhibiting defects resulting from

manufacturing and/or material faults within

24 months of purchase, Siemens shall, at

its own option and free of charge, either

replace the device with another device

reflecting the current state of the art, or

repair the said device. In respect of parts

subject to wear and tear (including but not

limited to, batteries, keypads, casings,

small parts on casings, protective cover-

ings where included in the scope of deliv-

ery), this warranty shall be valid for six

months from the date of purchase.

• This Guarantee shall be invalid if the

device defect is attributable to improper

treatment and/or failure to comply with

information contained in the user manuals.

• This Guarantee shall not apply to or

extend to services performed by the

authorised dealer or the customer them-

selves (e.g. installation, configuration,

software downloads). User manuals and

any software supplied on a separate data

medium shall be excluded from the Guar-

antee.

• Any other claims resulting out of or in con-

nection with the device shall be excluded

from this Guarantee. Nothing in this Guar-

antee shall attempt to limit or exclude a

Customers Statutory Rights, nor the man-

ufacturer's liability for death or personal

injury resulting from its negligence.

• The duration of the Guarantee shall not be

extended by services rendered under the

terms of the Guarantee.

• Insofar as no Guarantee default exists,

Siemens reserves the right to charge the

customer for replacement or repair.

• The above provisions does not imply

a change in the burden of proof to the det-

riment of the customer.

To invoke this Guarantee, please contact the

Siemens telephone service. The relevant

number is to be found in the accompanying

user guide.

• The purchase receipt, together with the

date of purchase, shall be required as evi-

dence for invoking the Guarantee. Claims

under the Guarantee must be submitted

within two months of the Guarantee

default becoming evident.

• Ownership of devices or components

replaced by and returned to Siemens shall

vest in Siemens.

136

Guarantee certificate (IRL)

Without prejudice to any claim the user (cus-

tomer) may have in relation to the dealer or

retailer, the customer shall be granted a

manufacturer’s Guarantee under the condi-

tions set out below:

• Devices fitted with accessories not

authorised by Siemens

• This Guarantee shall not apply to or extend

to services performed by the authorised

dealer or the customer themselves (e.g.

installation, configuration, software down-

loads). User manuals and any software

supplied on a separate data medium shall

be excluded from the Guarantee.

• The purchase receipt, together with the

date of purchase, shall be required as evi-

dence for invoking the Guarantee. Claims

under the Guarantee must be submitted

within two months of the Guarantee

default becoming evident.

• Ownership of devices or components

replaced by and returned to Siemens shall

vest in Siemens.

• This Guarantee shall apply to new devices

purchased in the European Union. For

Products sold in the Republic of Ireland the

Guarantee is issued by Siemens Ireland

Limited, Ballymoss Road, Sandyford

Industrial Estate, Dublin 18 - The Republic

of Ireland.

• Any other claims resulting out of or in con-

nection with the device shall be excluded

from this Guarantee. Nothing in this Guar-

antee shall attempt to limit or exclude a

Customers Statutory Rights, nor the man-

ufacturer’s liability for death or personal

injury resulting from its negligence.

• The duration of the Guarantee shall not be

extended by services rendered under the

terms of the Guarantee.

• In the case of new devices and their com-

ponents exhibiting defects resulting from

manufacturing and/or material faults within

24 months of purchase, Siemens shall, at

its own option and free of charge, either

replace the device with another device

reflecting the current state of the art, or

repair the said device. In respect of parts

subject to wear and tear (including but not

limited to, batteries, keypads, casings,

small parts on casings, protective cover-

ings where included in the scope of deliv-

ery), this warranty shall be valid for six

months from the date of purchase.

• This Guarantee shall be invalid if the

device defect is attributable to improper

care or use and/or failure to comply with

information contained in the user manuals.

In particular claims under the Guarantee

cannot be made if:

• The device is opened (this is classed as

third party intervention)

• Repairs or other work done by persons

not authorised by Siemens.

• Components on the printed circuit board

are manipulated

• The software is manipulated

• Defects or damage caused by dropping,

breaking, lightning or ingress of mois-

ture. This also applies if defects or dam-

age was caused by mechanical, chemi-

cal, radio interference or thermal factors

(e.g.: microwave, sauna etc.)

Guarantee certificate (IRL)

137

• Insofar as no Guarantee default exists,

Siemens reserves the right to charge the

customer for replacement or repair.

• The above provisions does not imply a

change in the burden of proof to the detri-

ment of the customer.

To invoke this Guarantee, please contact the

Siemens helpdesk on 1850 777 277. This

number is also to be found in the accompa-

nying user guide.

138

SAR – European Union (RTTE)

INFORMATION ON RF EXPOSURE/

SPECIFIC ABSORPTION RATE (SAR)

THIS MOBILE PHONE MEETS THE LIMITS

SET BY THE EU (1999/519/EC) FOR PRO-

TECTION OF THE HEALTH OF THE PUB-

LIC FROM THE EFFECTS OF EXPOSURE

TO ELECTROMAGNETIC FIELDS

only the power required to reach the net-

work. In general, the closer you are to a base

station, the lower the power output.

The highest SAR value for this model phone

when tested for compliance against the

norm is

0.67 W/kg****

These limits are part of comprehensive rec-

ommendations for the protection of the pub-

lic. The recommendations were developed

and confirmed by independent scientific

organisations through periodic and thorough

evaluation of scientific studies*. The limits

include a substantial safety margin designed

to assure the safety of all persons, regard-

less of age and health.

The SAR information can also be found on

the Siemens web site at

www.siemens-mobile.com

While there may be differences between the

SAR levels of various phones and at various

positions, all Siemens products meet the

legal requirements.

The World Health Organization (WHO,

CH-1211 Geneva 27, Switzerland)

states that present scientific information

does not indicate the need for any spe-

cial precautions for use of mobile

phones.

Before a radio equipment may be placed on

the market, compliance with the European

laws and the respective technical limit

requirements must be demonstrated. Only

then the CE mark may be affixed**. The limit

for mobile phones recommended by the

Council of the European Union employs a

unit of measurement known as the Specific

Absorption Rate, or SAR. This SAR limit is

2.0 W/kg***. This corresponds with the

requirements of the International Commis-

sion for Non-Ionizing Radiation Protection

ICNIRP and was adopted into the European

Norm for Mobile Radio Equipment EN

50360. The SAR of mobile phones is deter-

mined in accordance with the European

Norm EN 50361. This involves measuring

the maximum value in all frequency bands of

the mobile phone with the phone transmit-

ting at its highest power level. The actual

SAR level of the phone during normal opera-

tion may be well below the maximum value.

This is because the phone is designed to

operate at multiple power levels so as to use

Further information:

www.who.int/peh-emf

www.mmfai.org

www.siemens-mobile.com

** The CE mark confirms that the product is

in compliance with the legal require-

ments of the European Union as a pre-

requisite for the placing on the market

and the free movement of goods within

the European internal market.

*** averaged over 10 g body tissue.

**** SAR values may vary depending on

national requirements and frequency

bands. SAR information for different

regions can be found at

www.siemens-mobile.com

SAR – International (ICNIRP)

139

SAR – International (ICNIRP)

INFORMATION ON RF EXPOSURE/

SPECIFIC ABSORPTION RATE (SAR)

The highest SAR value for this model phone

when tested for use at the ear is

THIS MOBILE PHONE MEETS THE LIMITS

FOR PROTECTION OF THE HEALTH OF

THE PUBLIC FROM THE EFFECTS OF

EXPOSURE TO ELECTROMAGNETIC

FIELDS

0.67 W/kg***

SAR information can also be found at

www.siemens-mobile.com

While there may be differences between the

SAR levels of various phones and at various

positions, they all meet the international

guidelines for safe RF exposure.

Your mobile phone is a radio transmitter and

receiver. It is designed and manufactured

not to exceed the limits for exposure to radio

frequency (RF) energy recommended by

international guidelines from the Interna-

tional Commission on Non-Ionizing Radia-

tion Protection (ICNIRP). These limits are

part of comprehensive guidelines for the pro-

tection of the public and establish permitted

levels of RF energy for the population. The

guidelines were confirmed by independent

scientific organisations through periodic and

thorough evaluation of scientific studies*.

The limits include a substantial safety mar-

gin designed to assure the safety of all per-

sons, regardless of age and health.

The World Health Organization (WHO,

CH-1211 Geneva 27, Switzerland)

states that present scientific information

does not indicate the need for any spe-

cial precautions for use of mobile

phones.

Further information:

www.who.int/peh-emf

www.mmfai.org

www.siemens-mobile.com

** averaged over 10 g of tissue.

*** SAR values may vary depending on

national requirements and frequency

bands. information for different regions

can be found at

The exposure limit for mobile phones

employs a unit of measurement known as

the Specific Absorption Rate, or SAR. The

SAR limit stated in the international guide-

lines is 2.0 W/kg**. Tests for SAR are con-

ducted in all frequency bands using standard

operating positions with the phone transmit-

ting at its highest power level. The actual

SAR level of the phone during operation can

be well below the maximum value. This is

because the phone is designed to operate at

multiple power levels so as to use only the

power required to reach the network. In gen-

eral, the closer you are to a base station, the

lower the power output.

www.siemens-mobile.com

140

Menu tree

Default book

Show entries

Business card

Groups

Default book

Call records

Calls missed

Calls received

Calls dialled

Delete records

Durat/charges

All calls

All incom.calls

All outgoing

Remain. units

Charge sett.

Currency

Personal rate

Account limit

Auto display

Surf & fun

URL/service provider

Games

Applications

Downl. assist.

Bookmarks

Emoty

Internet

Camera

Messages

Create new

SMS text

MMS

E-mail

Inst. message

Menu tree

141

Messages

Inbox

SMS

MMS

E-mail

WAP push

Retr. e-mail

Send/rec. mail

CB services

Draft

SMS

MMS

E-mail

Unsent

SMS

MMS

E-mail

Retr. e-mail

Send/rec. mail

Sentbox

SMS

MMS

E-mail

MMS templates

SMS archive

Text modules

Message setup

Text zoom

SMS

SMS profiles

SMS signature

MMS

MMS profile:

User settings

Help

142

Menu tree

Messages

Message setup

E-mail

Accounts

General sett.

Help

WAP push set.

Voice message

CB services

Organiser

Calendar

Appointments

Tasks

Notes

Missed appts.

Dictat.machine

Time zones

Calendar setup

Extras

SIM services

Walky Talky

Alarm clock

Sound recorder

Calculator

Unit converter

Stopwatch

Countdown

Device manag.

Remote syncr.

My stuff

Setup

Profiles

Themes

Display

Language

Text input

Wallpaper

Logo

T9 preferred

Input language

Colour skin

Screensaver

Start up anim.

Shutdn anim.

Menu tree

143

Setup

Display

Own greeting

Big letters

Illumination

Dynamic light

Ringtones

Ringer setting

Silent alert

Volume

Incoming call

Walky Talky

Messages

CB services

Alarm clock

Organiser

System

d Calls

Group calls

Other calls

Walky Talky

More melodies

Messages

Alarm clock

Organiser

Startup melody

Shutdown mel.

Sound recorder

Phone Pilot

Call setup

Hide ID

Call waiting

Divert

All calls

Call screening

Any key answ.

Minute beep

Not reachable

No reply

Busy

Receiving fax

Receiving data

Status check

Clear all

144

Menu tree

Setup

Phone setup

Key tones

Info tones

Automatic switch off

Phone identity

Memory assis.

File system

Format

Master reset

Clean up

Clock

Time/date

Time zones

Date format

Time format

Buddhist year

Show clock

Auto time zone

Connectivity

GPRS

GPRS info

IrDA

Data services

HTTP profile

Authentication

Fax/data

Send voice/fax

Rec. voice/fax

Rec fax/data

Security

Auto key lock

Direct call

Only ‚

Codes

PIN control

This SIM only

Change PIN

Change PIN2

Chg.phonecode

Menu tree

145

Setup

Security

Barrings

All outgoing

Outgoing intl.

Out.int.x.home

All incoming

When roaming

Status check

Clear all

Network

Line

Select line

Protected

Network info

Choose netwrk

Auto network

Pref. network

Band selection

Fast search

User group

Active

Select group

All outgoing

Pref. group

Accessories

Car Kit

Auto answer

Automatic switch off

Car loudspk.

Key assignm.

Headset

Auto answer

146

Index

Browser ......................................7 1

Buddh. Date................................88

Business card ..............................3 0

Busy number...............................2 4

Accessories............................... 133

Additional books......................... 37

Addressbook

Dial entry................................ 33

Groups ................................... 34

New entry............................... 31

Read entry .............................. 33

Aircraft mode ............................. 76

Alarm

Alarm clock........................... 112

Type ..................................... 103

Alarm clock .............................. 112

All calls (call time/charge) ........... 39

All calls (diversion) ..................... 85

All incoming (barrings) ............... 94

Answering service (external)....... 68

Any to answer ............................ 85

Appointments .......................... 102

Authentication ........................... 92

Auto display

Clock ...................................... 88

Duration/charges .................... 39

Auto key lock.............................. 93

Auto time zone................... 88, 106

Auto. Network selection ............. 95

Auto. redial ................................ 24

Automobile accessories ............ 134

Calculator .................................1 14

Calendar ...................................1 01

Call

Ac cept/end..............................2 5

Ba rrin g ....................................9 4

Charges...................................3 9

Conference .............................2 6

Divert......................................8 4

End.........................................2 3

Hold........................................2 5

Menu......................................2 7

Reject......................................2 5

Swap (change )........................2 5

Call back .....................................2 4

Call divert ...................................8 4

Call trans fer ................................2 7

Call wai ting........................... 26, 84

Calling ........................................2 3

Calls dialled (call list)...................38

Calls rec eived (call list) ................3 8

Camera.......................................4 0

Car Kit

Accessories ...........................1 34

Se ttin g ....................................9 7

Car kit accessorie s .....................1 34

Care of phon e ...........................1 30

Cell Broa dcast (CB )......................6 9

Central input...............................4 2

Change faceplate ........................1 1

Change keypad mat ....................11

Charge rate.................................39

Charges ......................................39

Band selectio n ............................ 96

Battery

Charge.................................... 10

Insert........................................ 9

Operating time ............... 10, 131

quality declaration ................ 132

Big letters................................... 80

Bookmarks (WAP) ................. 70, 72

Index

147

Charging the battery................... 10

Clock.......................................... 88

Codes......................................... 17

Colour scheme ........................... 79

Conference................................. 26

Connection profiles .................... 90

Contact lis t ................................. 62

Control code (DTMF) .................. 28

Countdown .............................. 116

Credit limit ................................. 39

CSD settings ............................... 90

E-mail

Lists ........................................5 8

Receive/read............................5 8

Se ttings ..................................5 9

Write.......................................5 7

Emergency number.....................12

Emoty.........................................7 2

Extras ............................... 107, 130

Factory settings ..........................8 7

Fast a ccess..................................9 9

Fast se arch..................................9 6

Fax/data mod e ............................9 1

Filter...........................................85

Formattin g (SMS text ).................4 3

Formatting

(telephone memory)....................87

Forwardi ng (call).........................2 7

Frequency rang e .........................9 6

Data connection ......................... 89

Date format................................ 88

Default book .............................. 30

Device manag........................... 118

Dialling code .............................. 23

Dialling with number keys .......... 23

Dictating machine .................... 105

Digital rights management ......... 13

Direct call ................................... 27

Direct reply (SMS)....................... 47

Display

Illuminatio n ............................ 80

Language ............................... 79

Symbols.................................... 7

Divert......................................... 84

Download .................................. 73

DTMF tones

Games and applications ..............73

GPRS...........................................8 9

Groups........................................3 4

Hand set volume..........................2 3

Hand sfree talking........................2 5

Headset

Accessories ...........................1 33

Settin g ....................................9 7

Hide ID .......................................8 4

Highlighting mod e ......................1 6

Hold call ............................... 25, 27

Home network............................95

Hotline .....................................128

(tone sequences)........................ 28

Duration/charges........................ 39

Dynamic Light ............................ 78

148

Index

Mess age memory full ..................4 8

Mess age type..............................4 7

Microp hone on/off ................ 27, 41

Minute beep ...............................85

Missed appointment s ................1 04

Missed calls (call list)...................3 8

MMS

Lists ........................................5 4

Receive ...................................5 3

Send .......................................5 2

Write.......................................4 9

Mobi le Phone Manager .............1 23

Muting (microphone)............ 27, 41

My menu ....................................98

My phone ...................................2 9

Identity number (IMEI)................ 86

IMEI number............................... 86

Inbox.......................................... 53

Info tones................................... 86

Information services (CB)............ 69

Infrared...................................... 89

Infrared (IrDA) ............................ 89

Input language (T9).................... 20

Inst. Message ............................. 61

International dialling code .......... 24

Internet...................................... 70

Kamera ...................................... 40

Key tones ................................... 86

Network

Language ................................... 79

Limit (call time/charge)............... 39

Logo........................................... 79

Loss of phone, SIM car d ............ 131

Ba rrin g ....................................9 4

Connection .............................95

Settings ..................................9 5

Notes........................................1 04

Mailbox...................................... 68

Maintenance of phone.............. 130

Media Player............................. 120

Controls.................................. 14

My men u ................................ 98

Speed dialling......................... 17

Menu speed dialling ................... 16

Menu tree ................................ 140

Message

CB .......................................... 69

E-mail..................................... 57

MMS....................................... 49

SMS.................................. 43, 45

Only ‚ .....................................9 3

Only this SIM ..............................9 3

Operating times

(bat tery) ............................. 10, 131

Organiser..................................101

Own (p hone) numbers................3 7

Own greeting..............................8 0

PC connection.............................1 8

Phon e (settings)..........................8 6

Phone code.................................1 7

Phone data ...............................131

Phone identity number (IMEI)......8 6

Phone number

transmission on/off .....................84

Phone Pilot .................................83

Index

149

Phonebook

Additional books..................... 37

call an entry............................ 36

New entry............................... 35

Protected SIM ......................... 37

VIP numbers ........................... 37

Pictures & sounds (SMS) ............. 44

Change................................... 17

Control ................................... 17

Enter ...................................... 12

Error..................................... 127

PIN2........................................... 17

POP3.......................................... 60

Preferred network....................... 95

Preventing accidental

activation ................................... 18

Product data............................. 131

Profiles

MMS....................................... 55

Phone..................................... 75

SMS........................................ 47

WAP ....................................... 71

Prompt....................................... 24

Provider log o .............................. 79

PUK, PUK2.................................. 17

Safety prec autions ........................3

Screen saver ................................7 9

Second phone numbe r ................9 5

Security ......................................1 7

Service centre (SMS) ...................4 7

Service supplier portal.................2 9

Service tones ..............................8 6

Set time/date ..............................8 8

Settings ......................................7 5

Short message (SMS) ..................4 3

Shown in the displa y .....................7

Shut down animation..................8 0

Siemens City Portal .....................29

Sign al strength ...........................1 3

Silent alert ..................................8 1

SIM card

Clear barring ...........................1 8

Insert ........................................9

Prob lems...............................1 26

SIM services (optional) ...... 111, 112

SMS

Archive ...................................4 6

Lists ........................................4 6

Profiles....................................4 7

Read .......................................4 5

Settings ..................................4 7

Signature ................................4 7

T9 input ..................................2 0

To group .................................4 4

Write.......................................4 3

SMTP ..........................................6 0

SOS ............................................1 2

Sound recorder .........................1 13

Special characters .......................19

Speech time (battery) ...............131

Speed dialling keys....................100

Questions & Answers................ 125

Records ...................................... 38

Redial......................................... 23

Reminder ................................... 24

Remote synchronisation ........... 117

Ringtone setting......................... 81

Ringtones........................34, 81, 83

150

Index

Standard functions ..................... 15

Standby mode ............................ 14

Standby tim e ...................... 10, 131

Start up animation...................... 80

Stopwatch................................ 116

Storage location

(Phonebook) .............................. 35

Surf & fun................................... 70

Swap.......................................... 25

Switch off phone

Automatic............................... 86

Manually ................................ 12

Switch on phone ........................ 12

Symbols ....................................... 7

Synchronisation........................ 117

Validi ty, SMS...............................4 7

Voic e message (mailbox) ............6 8

Volume

Handset volume......................23

Profiles....................................7 5

Ringtone .................................8 1

Walky Talky......................... 82, 107

Wallpaper (display) .....................79

WAP............................................70

WAP push ...................................42

T9 text entry............................... 20

Tasks........................................ 103

Technical data .......................... 131

Text entry

With T9................................... 20

Without T9 ............................. 19

Text module ............................... 20

Time zone s ....................12, 88, 106

Topics ........................................ 77

Unanswere d ............................... 84

Unit converter .......................... 115

Upper and lowercase letters........ 19

User group ................................. 96

Toshiba Scorpio WD2500LPVT User Manual
Toshiba Hard Drive MK6461GSYN User Manual
Tascam CD RW4U User Manual
Sprint Nextel Palm Treo 755P User Manual
Sony MD Walkman MZ R700 User Manual
Roberts Radio CR9901 User Manual
Pioneer DEH 3730MP User Manual
Panasonic CF VFS721 User Manual
Onkyo DV CP701 User Manual
Nokia 6170 User Manual