SGH-a227 Series
P O R T A B L E
M O B I L E
User Manual
Q u a d - B A N D
P H O N E
Please read this manual before operating your
phone, and keep it for future reference.
GH68-17739A Rev. 1.0
Printed in Korea
®
Openwave is a registered Trademark of Openwave, Inc.
®
RSA is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Quick Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Set Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Set Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Section 5: Entering Text ...............................................22
Changing the Text Input Mode . . . . . . . . . . . . . . . . . . . . . . . . 22
1
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Index .............................................................................. 97
2
Section 1: Getting Started
This section describes how to start using your phone by
activating your service and setting up your voice mail.
3. Lift the bottom of the battery and then lift it up and away.
Activating Your Phone
When you subscribe to a cellular network, a plug-in SIM card is
provided loaded with your subscription details, such as your PIN
and other optional services.
Removing the Battery
4. With the battery in position on the phone, place the cover
1. If necessary, power-off the phone by holding down the
key until the power-off image displays.
back on the handset and slide it in until it clicks.
Installing the SIM Card
2. Remove the battery by sliding the battery cover away, as
shown.
Important!: The plug-in SIM card and its contacts can be easily damaged by
scratches or bending. Use caution when inserting or removing
the card and keep all SIM cards out of reach of children.
3
Make sure the gold contacts of the card face into the phone, then
slide the SIM card into the socket.
2. Press the battery down until it clicks into place. Make
sure that the battery is properly installed before
switching on the phone.
Removing the SIM Card
3. With the battery in position on the phone, place the
To remove the SIM card, slide it away from socket. See the
following illustration.
cover back on the handset and slide it in until it clicks.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. Use the
travel adaptor to charge the battery, and use only Samsung
approved batteries and chargers.
Installing the Battery
1. Align the battery tabs with the slots at the bottom of the
phone.
Getting Started
4
2. Plug the adaptor into a standard AC wall outlet. When
charging is finished, unplug the adaptor from the power
outlet.
Note: You must fully charge the battery before using your phone for the first
time. A fully discharged battery requires up to 4 hours of charge time.
Note: For connection to an electrical supply not located in the U.S., you must
use an adaptor of the proper configuration for the power outlet. Use of
the wrong adaptor could damage your phone and void your warranty.
1. Plug the connector of the travel adaptor into the jack on
the side of the phone.
3. Remove the adaptor from the charger port.
Note: You must unplug the adaptor before removing the battery from the
phone during charging to avoid damage.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain, a warning tone sounds and the “Battery Low” message
repeats at regular intervals on the display. The backlight turns off
to conserve the remaining battery power.
When the battery level becomes too low, the phone automatically
turns off.
5
Powering On or Off the Phone
1. Open the phone. Press and hold the
phone power-on screen displays.
Setting Up Your Voice Mail
key until the
If your service provider did not pre-configure your voicemail
number before accessing the server. Your service provider
can give you the number.
2. If the phone asks you to enter a password, enter a
password and press the OK soft key or the
more information, refer to “Change Phone Password” on
page 54.) The password is preset to “00000000” at the
factory.
key. (For
To access you voice mail from your keypad, use the following
steps:
1. Open the phone open to access your keypad.
2. From the Idle screen, press and hold the
key.
3. If the phone asks for a PIN, enter the PIN and press the OK
- or -
soft key or the
key.
3. In Idle mode, press the Menu soft key to access Menu
4. The phone searches for your network and after finding it,
the Idle screen displays. Now, you can make or receive
calls.
mode.
4. Highlight Recent Calls and press the
key.
key.
5. Highlight Voice Mail and press the
Note: The display language is preset to Automatic at the factory. To change
the language, use the Language menu. (For more information, refer to
“Language” on page 48.)
6. Highlight Connect to Voice Server and press the Select
soft key or the key.
5. When you wish to switch off the phone, press and hold the
7. When connected, follow the voice prompts from the voice
key until the power-off image displays.
mail center.
Getting Started
6
Changing the Voice Mail Number
9. Press the Select soft key or the
key to save your
changes.
Your SIM card gives you default service number of the voice mail
center. However, you may need to change the number. Use the
following procedures to change your voice mail number.
10. Press the
or
key to return to Idle mode.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Highlight Recent Calls and press the Select soft key or the
key.
3. Highlight Voice Mail and press the Select soft key or the
key.
4. Highlight Voice Server Number and press the Select soft
key or the
key.
5. Highlight Voicemail and press the Options soft key. Edit is
highlighted.
6. Press the Select soft key or the
key to modify the
number.
7. Highlight Edit Number and enter your new Voice Server
number. To edit the Voice Server Name, highlight Change
Name and enter your new Voice Server name.
8. Press the Options soft key. Save is highlighted.
7
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
displays the screen and the icons that are displayed when the
phone is in use.
Open View of Your Phone
The following illustrations show the main elements of your
phone:
Features of Your Phone
13. Earpiece
Your phone is lightweight, easy-to-use and offers many
significant features. The following list outlines a few of the
features included in your phone.
1. Display
User friendly, menu driven access to features and options.
•
•
•
Text message capability
Speakerphone capability
12.WAP Browser/Menu Confirm key
Featured applications provide alarms, calculator, converter, and world
time.
11. Navigation keys
2. Soft key (right)
2. Soft key (left)
3. Send key
10. Power on/off/Menu exit key
9. Clear key
4.Volume/Menu Navigation key
5.Voicemail key
6. Alphanumeric keypad
8. Special Function keys
7. Microphone
Understanding Your Phone
8
Keys
6. Alphanumeric keypad: Use these keys to enter numbers,
letters and characters.
The following list correlates to the open and front view
illustrations.
7. Microphone: The Microphone allows the other callers to
1. Display: This screen displays all the information needed to
hear you clearly when you are speaking to them.
operate your phone.
8. Special Function keys: Press the Asterisk/Shift key-
2. Soft key: Performs the functions indicated by the screen
[ ] character for calling features. In text mode,
enters the
*
text on the bottom of the display.
press and hold the
symbol input type.
[ ] character to change the to
pound #
3. Send key: Allows you to place or receive a call. In standby
mode, press the key once to access the Recent Call log. If
you press and hold the key down, you will initiate the most
recent call from the Recent Call log.
Pound/Space/Silent Mode key-enters
[ ] character for calling features. In text entry
the pound #
mode, press to enter a space between characters. In Idle
mode, press and hold to place handset in Silent mode.
4. Volume/Menu Navigation key: Allows you to adjust the
ringer volume in standby mode or adjust the voice volume
during a call. The volume key can also be used to scroll up
or down to navigate through the different menu options. To
mute the ringer during an incoming call, press the volume
key up or down. You can reject the call by pressing and
holding the down key.
9. Clear key/Calendar key: Deletes characters from the
display when you are in text entry mode. When in a main
menu, press to return to the previous menu. Press to
display the Calendar on the main screen.
10. Power on/off/Menu Exit key: Ends a call. Press and hold
this key for a few seconds to power your phone On or Off.
While in the main menu, it returns the phone to standby
mode and cancels you input. When you receive an
incoming call, press to reject call.
5. Voicemail key: Press and hold the
key to
automatically dial your voicemail.
9
11. Navigation keys: This key allows you to scroll through
phone menu options and provides a shortcut to phone
functions from standby mode.
Keys
The following list correlates to the open and front view
illustrations.
1. Front LCD: Your phone has an external display on the front
of the phone. It indicates when you have an incoming call
or message. It also displays date, time, reception, battery
power, and any icons associated with alerts, such as
messages, or a set alarm.
12. WAP Browser/Menu confirm key: When navigating
through a menu accepts the highlighted choice in the
menu. If you press once in Idle mode, the WAP browser
will launch.
13. Earpiece: Used to listen to audio from your phone.
2. Power interface Connector/Headset jack: The power
interface connector is used to plug in the charging
accessories and the headset.
Closed View of Your Phone
Backlight
A backlight illuminates the display and the keypad when you
press any key or open the phone. It turns off when no keys are
pressed within a given period of time, or dims the light,
depending on the settings in the Backlight menu.
Understanding Your Phone
10
Icons
Internal Display Layout
The display has 3 areas:
1. The top line of your phone’s
main display contains icons
that indicate network status,
battery power, signal
Showsthereceivedsignalstrength.Thegreaterthenumber
of bars, the stronger the signal.
1
2
E
Appears when a new text message has been received.
Appears when a new voice mail has been received.
Appears when you set an alarm to ring at a specified time.
Appears when you there is no network coverage available.
Appears when a call is in progress.
strength, connection type,
and more.
3
Menu Options
2. The center portion of the main display shows information
such as call progress information, messages, and photos.
The bottom line of the main display shows current soft key
functions. The sample screen shows that pressing the Left
soft key ( ) will show the Main Menu. Pressing the
Right soft key ( ) will launch the Options menu.
Appears when incoming call Alert Type is set to Vibration.
Appears when an incoming call Alert Type is set to Vibration
Then Melody.
Appears when an incoming call Alert Type is set to Vibration
And Melody.
Appears when Silent Mode or Vibration is active.
11
Appears when Silent Mode, Mute is active.
Soft Keys
The roles of the soft keys vary depending on the function you are
currently using; the labels on the bottom line of the display just
above each key indicate their current role.
Shows the level of your battery. The more bars you see, the
more power you have remaining.
Left Soft Key
Selecting Options
Some functions of the left soft key are as follows.
•
In the Idle screen, press the Menu
(
left) soft key
to open the
To view the various functions and options available and to select
the one you want:
Menu screen.
•
When in a menu mode the left soft key
function is Select
.
•
•
Press the Right Soft Key.
Right Soft Key
To select the function displayed or the option highlighted, press the
Select soft key or the
To view the next function or highlight the next option on a list, press the
Down Navigation key or the key on the left side of the phone.
To move back to the previous function or option on a list, press the Up
Navigation key or the key on the left side of the phone.
key.
Some functions of the right soft key are as follows:
•
•
•
•
•
In the Idle screen, press the right soft key
menu.
to launch the Options
•
When in a menu mode the right soft key
function is Back
.
Navigation Key
To move back up one level in the menu structure, press the Back soft
key.
Use the directional keys on the Navigation key to browse menus,
sub menus, and lists. Press the up or down navigation when
jumping to highlighted links on the web.
To exit the menu structure without changing the settings, press the
key.
Command Keys
Functions for the soft keys are defined by what appears above
each in the display. There are two soft keys, the left soft key
and the right soft key
.
Understanding Your Phone
12
Each key also acts as a shortcut to launch applications.
Clear Key
The clear key
is used to erase or clear numbers, text, or
to return to a
previous menu or to return to standby mode from any menu.
symbols from the display. You can also use
•
If you enter an incorrect character, briefly press
(and delete) the character.
to backspace
IM
•
•
•
To erase the entire sentence, press and hold
.
To back up one menu level, briefly press
Press the key to display the Calendar.
.
End Key
The End key
calls, and return to the standby mode.
is used to turn on/off your phone, disconnect
Send Key
The Send key
recall the last number(s) dialed, received, or missed.
is used to answer calls, dial calls, and to
•
•
•
Press and hold the End key
to turn on your phone.
Briefly press
Press
once to disconnect a call.
•
•
•
•
Press
once to answer calls.
to return to standby mode from any menu, or to cancel
Enter a number and briefly press
to make a call.
the last input.
Press
to pick up a waiting call.
in standby mode to display a list of recent calls to
Briefly press
and from your phone.
•
Press
twice in standby mode or press and hold to call the most
recent number.
13
Section 3: Call Functions
This section describes how to make or answer a call. It also
includes the features and functionality associated with making or
answering a call.
•
To clear the whole display, press and hold the
key.
2. Press the
key to return to the Idle screen.
Ending a Call
Making a Call
When the Idle screen displays, enter the area code and phone
When you want to finish your call, briefly press the
key.
Redialing the Last Number
number, and press the
key.
All incoming, outgoing and missed calls are listed in the Recent
Calls Menu. If the number or caller is listed in your Contacts List,
the name associated displays.
Making an International Call
1. Press and hold the
key. The + character appears.
2. Enter the country code, area code, and phone number.
Press the key.
To access the Recent Calls menu:
1. From the Idle Screen, press
Menu. Use the
Correcting a Dialed Number
Navigation keys to highlight Recent Calls and press
Use the following steps to correct a mis-typed entry prior to
initiating the call.
Select.
2. Use the Up and Down navigation keys to scroll through the
Recent Calls options. Choose from All Calls, Missed Calls,
Calls Made, Calls Received, Voice Mail, Speed Dial List,
Contact List, Delete All, Call Time, Data Volume, Data
Call Time and Call Costs.
1. After dialing a number
•
•
To clear the last digit displayed, press the
key.
To clear another digit in the number, press the Left or Right
navigation key until the cursor is immediately to the right of the digit
to be cleared. Press the
key.
•
To enter a missing digit press the Left or Right navigation key until
the cursor is in position and enter the digit.
-OR-
Call Functions
14
From the Idle Screen, press the
key to display a list
Answering a Call
of the most recent numbers used in the order you dialed or
received them.
When a call is received the phone rings and displays the caller’s
phone number, or name if stored in the Contacts List.
1. From the Idle Screen press the
key or the Accept
3. Use the Up and Down navigation keys to scroll through the
soft key to answer the incoming call.
numbers until the number you want highlights.
If the Any Key option in the Call Answer menu is
4. To dial the highlighted number, press the
key.
activated, you can press any key to answer a call except
Making a Call from the Contacts List
the
key and the Reject soft key.
You can store phone numbers that you use regularly on the SIM
card or in the phone’s memory. These entries are collectively
called the Contacts List.
If the Flip Open option in the Call Answer menu is
activated, you can answer the call simply by opening the
phone.
Once you have stored a number in the Contacts List, you can
dial it by pressing a few keys using the Speed Dial feature.
Note: To reject an incoming call, press and hold the Volume keys on the left
side of the phone before opening the phone. A quick press of side
volume key silences ringer on incoming call.
For further details about the Contacts List feature, see “Finding
a Contacts List Entry” on page 26.
Adjusting the Call Volume
During a call, if you want to adjust the earpiece volume, use the
Volume keys on the left side of the phone.
2. End the call by closing the phone or by pressing the
key.
Press the
to decrease the level.
key to increase the volume level and the
key
Note: You can answer a call while using the Contacts List or menu features.
After ending the call, the phone returns to the function screen you
were using.
In Idle mode, you can also adjust the ringer volume using these
keys.
15
Deleting a Missed Call
Recent Calls
The phone stores the numbers of the calls you’ve dialed,
received, or missed in the Recent Calls menu. If the number or
caller is listed in your Contacts List, the name associated
displays.
To delete a missed call entry, use the following steps:
1. Immediately after missing a call, press the View soft key.
2. Press the Options soft key and highlight Delete. Press the
Select soft key, or the
key.
Viewing Missed Calls
3. At the “Delete?” prompt, press the Yes soft key to confirm
The number of calls you have missed displays on the Idle screen
when a call is missed. To view the number details, use the
following steps:
deletion or No to cancel.
You can press the
feature.
key at any time to exit the Missed Call
1. If the phone is closed, open the phone.
Call Time
2. Press the View soft key. The most recent missed call
1. From the Idle Screen, press
Navigation keys to highlight Recent Calls and press
Select soft key or the key.
Menu. Use the
displays.
Note: If there is a voicemail sent by the same number, associated icons
display and can be selected.
2. Highlight Call Time and press the Select soft key or the
3. To scroll through the missed calls, press the Up or Down
key.
navigation key.
3. The following options that are available.
• Last Call Time: shows the length of time for the last call.
• Total Sent: shows the total length of time for the calls made.
• Total Received: shows the total length of time for the calls
received.
Call Functions
16
4. Press the Reset soft key.
• Total Volume: shows the Sent
,
Received, and Total volume of
data from the phone.
5. At the “Are You Sure?” prompt, press the Yes soft key to
4. Press the Back soft key or the
key to end.
confirm the reset or No to cancel.
Data Call Time
1. From the Idle Screen, press
6. Enter your password. Press the OK soft key. At the
“Confirm New Password”, re-enter the same password
and press the OK soft key.
Menu. Use the
Navigation keys to highlight Recent Calls and press
Select soft key or the key.
2. Highlight Data Call Time and press the Select soft key or
the key.
Note: You are only required to set the password 1 time. After the initial setup,
you can enter the password to reset the call times.
7. Press the Back soft key or the
key to end.
3. The following options are available:
• Last Data Call: shows the time used for the last data call sent or
Data Volume
1. From the Idle Screen, press
received.
Menu. Use the
• Total Data Call: shows the total time used to send or receive data.
Navigation keys to highlight Recent Calls and press
Select soft key or the key.
2. Highlight Data Volume and press the Select soft key or
the key.
4. Press the Back soft key or the
key to end.
Silent Mode
Silent mode is convenient when you wish to stop the phone from
making noise, in a theater for example.
3. Use the Up and Down navigation keys to view the
In Idle mode, press and hold the
Activated” message and the
key until the “Silent Mode
Silent Mode icon displays.
following information:
• Recent Volume: shows the Sent
,
Received, and Total data size
used.
17
In Silent Mode, your phone will vibrate and light up the external
LCD display or just light the external LCD display depending on
the setting in the Silent Mode feature.
To make a call while you have a call in progress:
1. Place the call on hold using the previous procedures, and
enter the phone number that you wish to dial or look it up
in the Contacts List.
To exit and reactivate the previous sound settings, press and hold
the
key again until “Silent Mode Deactivated” displays. The
Silent Mode icon no longer displays.
2. Press the
key to dial the second call.
Options During a Call
Your phone provides a number of control functions that you can
use during a call.
When you have an active call and a call on hold, you may switch
between the two calls, changing the one on hold to active and
placing the other on hold. To switch between the two calls,
simply press the Swap soft key. The current call is placed on
hold and the call on hold is reactivated so that you can continue
conversing with that person.
Speakerphone Key
During a call, press the speakerphone key
to activate the
speakerphone operation. Use the volume keys (located on the left
side of your phone) to adjust the volume.
In Call Options
During a call, press the Options soft key to access the following:
Putting a Call on Hold
•
•
Hold: Places the call on hold.
New Call: places the current call on hold and allows you to enter and
dial another number.
You can place the current call on hold whenever you want. You
can also make another call while you have a call in progress if
your network supports this service.
•
•
Contacts List: access the Contacts List information.
Message: allows you to send a message from My Messages, or to
create a new text message.
To put a call on hold:
1. While on a call, press the left soft key Options. Highlight
Hold and press the Select soft key. The call is on hold.
•
•
Calendar: allows you to access the Calendar feature.
Mute Keypad Tone: mute the key tones when on the call.
2. You can reactivate the call whenever you want, by pressing
the Resume soft key.
Call Functions
18
•
Send DTMF: sends DTMF (Dual Tone Multi-Frequency) tones to the
contacts you have selected.
Muting or Sending Key Tones
These options allow you to turn the key tones off or on. If the
Mute Keypad Tone option is selected, your phone does not
transmit the DTMF (Dual Tone Multi-Frequency) tones of the keys,
which allows you to press keys without hearing annoying key
tones during a call.
If you are in a multi-party call, the following options also display:
•
•
•
Swap: allows you to switch between the two active calls.
Join: joins the calls you have established with your phone.
Split: when a multiparty call is in progress, the split option will
eliminate the two calls into their original calls.
Note: To communicate with answering machines or computerized telephone
•
Remove: when a multiparty call is in progress, the remove option will
display the phone numbers. Highlight the number to be removed to
end that call.
systems, the Send DTMF option must be selected.
Searching for a Number in Contacts List
•
End Held Call: ends the call that is placed on hold.
You can search for a number in Contacts List during a call.
When you want to finish, end each call normally by pressing the
key.
1. Press the Options soft key.
2. Press the Down key to highlight the Contact List option.
Switching off the Microphone (Mute)
Press the Select soft key or the
key.
You can temporarily switch your phone’s microphone off, so that
the other person cannot hear you.
3. Enter the first few letters of the name to display entries
listed starting with the first entry matching your input.
Example: You wish to say something to person in the room, but do not want
4. Use the Navigation keys to select an entry.
the person on the phone to hear you.
key.
During a call, to switch the microphone off temporarily:
For further details about the Contacts List feature, see “Finding
a Contacts List Entry” on page 26.
1. Press the
Mute. Unmute displays.
2. Press the
Unmute to deactivate the Mute function.
19
Call Waiting
The Call Waiting feature allows you to answer an incoming call
while you have a call in progress, if this service is supported by
the network, and you have set the Call Waiting-Voice Calls
Menu to Activate. You are notified of an incoming call by a call
waiting tone.
To answer a call while you have a call in progress:
1. Press the
key or the Accept soft key to answer the
incoming call. The first call is automatically put on hold.
2. To switch between the two calls, press the Swap soft key.
To end a call on hold, press the Options soft key or the
and select the End Held Call option. Press the key.
To end the current call, press the key.
key
Call Functions
20
Section 4: Menu Navigation
Menu Navigation
Menus and sub-menus can be accessed by scrolling using the
Navigation keys or by using the shortcut keys.
5. To exit the menu without changing the settings, press the
key.
Using Shortcuts
Accessing a Menu Function by Scrolling
Numbered menu items, such as menus, sub-menus, and options
can be quickly accessed by using their shortcut numbers. In
Menu mode, Main Menus can be accessed by pressing the
number keys (1 to 9) corresponding to their location on the
1. In Idle mode, press the Menu soft key to access Menu
mode. Scroll using the Navigation keys to reach a main
menu Settings for example. Press the Select soft key or
screen. In menu mode, press the
key for item 11, and the
key for item 10, the
key for item 12.
the
key to enter the menu.
2. If the menu contains sub-menus, press the Menu >
Example: Accessing the Language menu.
Settings > Set Phone and by press the Select soft key or
the
key. If the menu that you have selected contains
1. Press the Menu soft key.
further options, repeat this step.
2. Press the
3. Press the
4. Press the
key for Settings.
key for Set Phone.
key for Language. The available
3. To scroll through the menus, press the Up or Down
navigation key or the Volume key (located on the left side
of your phone). Press the Select soft key, or the
key to
languages are displayed.
make your selection.
4. To return to the previous menu level, press the Back soft
key, the key.
21
Section 5: Entering Text
This section outlines how to select the desired text input mode
when entering characters into your phone. This section also
describes how to use the T9 predictive text entry system to
reduce the amount of key strokes associated with entering text.
ABC Mode
This mode allows you to enter letters by pressing the key
labeled with the letter you want. Press the key once, twice,
three, or four times until it displays.
Changing the Text Input Mode
The Text Input option switches the key entry functions from T9
Numeric Mode
This mode allows you to enter numbers.
Mode, ABC Mode, Numeric Mode, and Symbols Mode.
T9 Mode
Symbols Mode
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more
than one letter; for example, pressing the 5 key can enter
J, K, or L. However, the T9 mode automatically compares
the series of keystrokes you make with an internal
linguistic dictionary to determine the most likely word,
thus requiring far fewer keystrokes than the traditional
Alphabet mode.
This mode allows you to enter symbols, such as
punctuation marks.
When you are in a field that allows characters to be entered, you
will notice the text input mode indicator on the display.
Text Input
Mode Indicator
Entering Text
22
1. To change the text input mode, press the Options (left) soft
key ( ).
2. Scroll to the Input Method options and press the Select
(left) soft key ( ) or the key.
3. Select one of the following options:
Enter a Word in T9 Mode
1. In T9 mode, begin entering a word by pressing the 2 to 9
keys. Press each key only once for each letter. The built-in
dictionary lists words that match the keystrokes you have
entered.
ab
Ab
AB
T9ab
T9Ab
T9AB
Numeric
Symbols
Example: To enter “Hello”, press
,
,
,
,
.
The word that you are typing appears in the display. It may
change with each key that you press.
Tip: You can also change between:
- ABC mode and T9 mode by pressing and holding the
2. Enter the whole word before editing or deleting the
key.
keystrokes.
- Abc/ABC/abc/123 or T9Ab/T9AB/T9ab/123 by short pressing the
3. When the word displays correctly, continue to step 5.
key.
4. If the word doesn’t display correctly, press the
key to
- ABC mode/T9 mode/Numeric mode and Symbol mode (SYM) by
pressing and holding the
key.
display alternative word choices for the keys that you have
pressed.
Using T9 Mode
T9 Predictive Text input mode is based on a built-in dictionary.
Example: Both “Of” and “Me” have the
and
keys. The phone
displays the most commonly used choice first.
5. Insert a space by pressing the
key and start entering
the next word.
23
Add a New Word into the T9 Dictionary
Using Alphabet Mode
1. After pressing the keys corresponding to the word you
To use the Alphabet Mode use the
your text.
to
keys to enter
want to add, press the
words.
key to display the alternative
1. Press the key labeled with the letter you want:
•
•
•
Once for the first letter
Twice for the second letter
And so on
2. When the last alternative word is displayed, Spell displays.
Press the Spell soft key or the key.
3. Enter the word you want to add using ABC mode.
4. Press the Add soft key or the key.
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key, just
wait for a few seconds for the cursor to move to the right
automatically, and then select the next letter.
The word is added to the T9 dictionary and becomes the
first word for the associated keypress series.
Note: This feature may not be available for some languages.
Keys
.
, ‘ - ? ! @ : / 1
•
To enter periods, hyphens, colons, or parenthesis, press the
key. T9 mode applies grammar rules to ensure that correct
punctuation is used.
•
•
•
•
•
A B C 2 a b c 2
D E F 3 d e f 3
G H I 4 g h i 4
•
•
To shift case in T9 mode, use the
key. There are 3 cases: Initial
capital, Capital lock, and Lower case.
You can move the cursor by using the Left and Right keys. To delete
letters, press the
display.
key. Press and hold the
key to clear the
J K L 5 j k l 5
Entering Text
24
Entering Symbols
Symbol mode enables you to insert symbols and punctuation
marks into text.
M N O 6 m n o 6
P Q R S 7 p q r s 7
T U V 8 t u v 8
•
•
•
•
•
1. To enter symbol mode press and hold the
key.
2. To select a symbol, press the corresponding number key.
W X Y Z 9 w x y z 9
3. To display more symbols, press the Up or Down navigation
key.
+ = < >
£ $ % & ¥ ¤ 0
4. To clear the symbol(s), press the
key. When the input
field is empty, this key returns the display to the previous
mode.
5. To insert the symbol(s) into your message, press the OK
soft key or the
key.
Using Numbers
Number mode enables you to enter numbers into a text message.
Press the keys corresponding to the digits you want to enter.
25
Section 6: Understanding Your Address Book
This section allows you to manage your daily contacts by storing
their name and number in your Contacts List. Contacts List
entries can be sorted by name, or entry.
3. Highlight Contact List and press the Select soft key or the
key.
4. Enter the first few letters of the name.
Using Contacts List
Dialing a Number from Contacts List
5. The Contacts List entries are then listed, starting with the
first entry matching your input.
Once you have stored phone numbers in the Contacts List, you
can dial them easily and quickly by using the location numbers
that were assigned to them in the Contacts List.
6. To select a different entry, press the Up or Down
navigation key until the entry you want is highlighted.
7. Once you have found the entry, press the
key to dial
Tip: To quickly access your Contact List press the Down Navigation key.
the number, or press the Options soft key to access the
Finding a Contacts List Entry
Contacts List entry options.
You can store phone numbers and their corresponding names in
your SIM card and phone’s memories. They are physically
separate but are used as a single entity, called Contacts List.
Using Contacts List Entry Options
To access any Contacts List entry, press the
key.
To access the options, press the Options soft key. The following
options are available:
Depending on your particular SIM card, the maximum number of
phone numbers the SIM card can store may differ.
–
–
–
Edit: allows you to edit the name and the number assigned to this
contact. Press the key to save.
Send Message: allows you to send a text or multimedia message to
this contact.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, and press the Select soft key or
the
key.
Call: allows you to place a call to this Contact.
Understanding Your Address Book
26
–
–
Copy to Phone/SIM: allows you to copy the contact information to the
Phone or the SIM card (depending on the initial storage location).
Send Business Card via: allows you to set the Business Card
information for this entry in a Text or Multimedia message.
Assign Speed Dial: allows you to set the speed dial key for this entry.
Delete: allows you to delete the selected Contacts List entry.
Add to Reject List: allows you to add the contact to an automated reject
list.
5. Enter the contact First Name.
6. Highlight Last Name and enter the contact Last Name, if
desired.
–
–
–
7. Select a phone category from the following category types:
•
•
•
•
•
•
Mobile: assigns the number entered to the Mobile entry.
Home: assigns the number entered to the Home entry.
Office: assigns the number entered to the Office entry.
Fax: assigns the number entered to the Fax entry.
Highlight a desired option and press the Select soft key or the
key.
Other: assigns another phone number for the contact entry.
Email: allows you to enter an Email address for the contact.
Adding a New Contact
Use the following steps to add a new Contact.
Storing a Number in the Phone’s Memory
1. When the Idle screen displays, press the Menu soft key.
8. Enter the contact Number, Email address, Graphic ID,
Ringtone, Group or Notes and press the
the information.
key to save
2. Highlight Address Book, press the Select soft key or the
Tip: To change text entry mode press the
key. For further details about
key.
how to enter characters, see “Using Alphabet Mode” on page 24.
3. Scroll to Add New Contact by pressing the Up or Down
navigation key and press the Select soft key or the
key.
9. The View screen appears in the display. Use the Up and
Down navigation keys to choose one of the following
options:
4. Highlight Phone and press the Select soft key or the
•
•
Mobile: allows you assign a cellular phone number for this contact.
key.
Home: allows you assign a home phone number for this contact.
27
•
•
•
•
•
Office: allows you assign an office phone number for this contact.
Fax: allows you assign a fax number for this contact.
• Add to Reject List: allows you to add a contact’s phone number to
a rejection list.
11. To return to the Idle screen, press the
key.
Other: allows you enter other number for this contact.
Email: allows you to assign the e-mail information to this contact.
Storing a Number in the SIM Card
1. When the Idle screen displays, press the Menu soft key.
Graphic ID: allows you to associated a graphic with the recipients
number.
2. Highlight Address Book, press the Select soft key or the
•
•
•
Ringtone: allows you to set a ringtone that identifies this recipient.
key.
Group: allows you to assign this recipient to a caller Group.
3. Scroll to Add New Contact by pressing the Up or Down
navigation key and press the Select soft key or the
key.
Notes: allows you to compose miscellaneous notes and save them
with this entry.
10. Press the Options soft key to display the following options:
•
Edit: allows you to edit the name and number assigned to this
4. Highlight SIM Card and press the Select soft key or the
contact.
key.
•
•
•
Send Message: allows you to send a message to this contact.
5. Enter the following information for the New Contact.
Call: allows you to place a call to this contact.
•
•
Name: allows you to enter a name for the number entered.
Copy to: allows you to copy the contact information from the
Phone, SIM Card, SIM Card(FDN) card.
•
•
•
Send Business Card via: allows you to set the Business Card
Tip: To change text entry mode, press and hold the
capitalization, momentarily press the key. For further details about
how to enter characters, see “Entering Text” on page 22.
key. To change
information for this entry in a Text or Multimedia message.
Assign Speed Dial: allows you to set the speed dial key for this
entry.
•
Location: allows you to assign a location number on your SIM for
the number being entered.
Delete: allows you to delete the selected Contacts List entry.
Understanding Your Address Book
28
•
Memory Status: shows the number assigned to the SIM memory
key. The contact entry information is displayed.
card.
2. Press either the Dial soft key or the
key to initiate the
6. Press the Save soft key or the
key to save each entry.
call.
7. Press the Options soft key to display the following options:
Speed Dial
•
Edit: allows you to edit the name and number assigned to this
contact.
Once you have stored phone numbers from your Contacts List,
you can set up to 8-speed dial entries and then dial them easily
whenever you want, simply by pressing the associated numeric
key.
•
•
•
Send Message: allows you to send a message to this contact.
Call: allows you to place a call to this contact.
Copy to Phone: allows you to copy the contact information from
the Phone.
In Idle mode, to speed dial the numbers assigned to keys (2 to 9),
press and hold the appropriate key.
•
•
•
Send Business Card via: allows you to set the Business Card
information for this entry in a Text or Multimedia message.
Setting Up Speed Dial Entries
1. When the Idle screen displays, press the Menu soft key.
Assign Speed Dial: allows you to set the speed dial key for this
entry.
2. Highlight Address Book, press the Select soft key or the
Delete: allows you to delete the selected Contacts List entry.
key.
• Add to Reject List: allows you to add a contact’s phone number to
a rejection list. Your handset will automatically reject and send an
automated voice mail. The message the caller receives is that your
number is unavailable.
3. Scroll to Contact List by pressing the Up or Down
navigation key, press the Select soft key or the
4. Select an available entry and press the key.
key.
8. To return to the Idle screen, press the
key.
5. Press the Options soft key and scroll to Assign Speed
Dialing a Number from the SIM Card
Dial by pressing the Up or Down navigation key, then
1. In Idle mode, enter the SIM location number assigned to
press the Select soft key or the
key.
the phone number you want to dial and press the
29
6. Highlight the key into which you wish to assign the speed-
6. Highlight Contact or FDN Contact and press the Select
dialing number (from the 2 to 9 keys), and press the Select
soft key.
soft key or the
key. Your selection is saved.
7. Find and highlight a contact to be assigned to this key and
press the Options soft key.
Note: Memory location 1 is reserved for your Voice mail server number.
8. Highlight Select and press the Select soft key.
Changing a Number Assigned to a Key
9. When you are finished, press the
key to return to Idle
1. When the Idle screen displays, press the Menu soft key.
mode.
2. Highlight Address Book, press the Select soft key or the
Deleting Speed Dial Entries
key.
1. When the Idle screen displays, press the Menu soft
3. Scroll to Speed Dial List by pressing the Up or Down
key.
navigation key, press the Select soft key or the
key.
2. Highlight Address Book, press the Select soft key or
the
key.
4. Highlight the entry you wish to change and press the
3. Scroll to Speed Dial List by pressing the Up or Down
navigation key, press the Select soft key or the
key.
Options soft key.
•
View: allows you to view the number and name assigned to this
key.
4. Select the key with the number assigned that you want
•
Change: allows you to select a new number and assign it to this
key.
to remove and press the Options soft key.
5. Highlight Remove and press the Select soft key. A
“Remove?” prompt displays. Press Yes to continue or
No to cancel.
• Call: allows you to call the selected contact.
Remove: allows you to delete the number assigned to this key.
•
5. To edit an assigned speed dial number, highlight Change
6. When you are finished, press the
key to return to
and press the Select soft key.
Idle mode.
Understanding Your Address Book
30
Changing My Own Phone Number
Finding My Own Phone Number
1. When the Idle screen displays, press the Menu soft key.
This function is a memory aid, which you can use to check your
own phone number if you need to do so.
2. Highlight Address Book, press the Select soft key or the
You can assign a name to each of your own phone numbers
registered on your SIM card. You can also edit the names and
numbers. Any changes made here do not in any way affect the
actual subscriber numbers on your SIM card.
key.
3. Scroll to Own Number by pressing the Up or Down
navigation key and press the Select soft key or the
key.
1. When the Idle screen displays, press the Menu soft key.
4. Highlight Phone Number, your mobile number displays in
2. Highlight Address Book, press the Select soft key or the
a pop up.
key.
5. Press the Options soft key to display the following options:
3. Scroll to Own Number by pressing the Up or Down
navigation key and press the Select soft key or the
key.
•
•
Edit: allows you to change the Name and Number in this field.
Remove: allows you to Empty this field.
6. To edit an assigned Own Number field, highlight Edit and
press the Select soft key or the key.
4. Highlight Phone Number, your mobile number displays in
a pop up.
7. To enter additional numbers in the 2, 3, and 4 fields, press
5. When you are finished, press the
key to return to Idle
the Options soft key, highlight Add, and press the Select
mode.
soft key or the
8. Press the
key.
key to Save.
31
FDN List
Management
FDN (Fixed Dial Number) mode, if supported by your SIM card,
allows you to restrict your outgoing calls to a limited set of phone
numbers.
The Management option allows you to copy and view the
memory status for the Phone and SIM entries on your phone.
Default Saving
You can set the Address Book to automatically save new Contact
List entries Phone or SIM card or to prompt you where to save
each new entry.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
1. When the Idle screen displays, press the Menu soft key.
3. Scroll to FDN List by pressing the Up or Down navigation
2. Highlight Address Book and press the Select soft key or
key and press the Select soft key or the
key.
the
key.
4. Press the Options soft key and highlight Add. Press the
3. Scroll to Management by pressing the Up or Down
navigation key and press the Select soft key or the
key.
key.
5. Enter your PIN2 number. (You can obtain your PIN2 from
your service provider.)
4. Scroll to Default Saving by pressing the Up or Down
navigation key and press the Select soft key or the
key.
The following options are available:
Note: Contact your service provider for your PIN2 number.
5. Highlight the memory location you want to receive new
Contacts List entries and press the Select soft key or the
key.
•
•
Disable: you can call any number.
Enable: you can only call phone numbers stored in SIM card.
Understanding Your Address Book
32
6. Available options are: Phone, SIM Card, or Ask on Saving.
•
•
•
•
Copy: allows you to copy all ticked numbers to the Phone or SIM
Card.
7. When you are finished, press the
key to return to Idle
Tick All: allows you to select all Contact List entries for copying to
the Phone or SIM Card.
mode.
Untick All: allows you to unselect all Contact List entries from
copying to the Phone or SIM Card.
Copy All to
You can copy all entries from the SIM card to the Phone, or from
the Phone to the SIM card, using the Copy All to option.
Select Language: allows you to select a language for all ticked
numbers to the Phone or SIM Card.
1. When the Idle screen displays, press the Menu soft key.
7. Highlight Copy and press the
key.
2. Highlight Address Book, press the Select soft key or the
Sort by Contacts
key.
The Sort by contacts option allows you to sort contacts by First
name or Last name.
3. Scroll to Management by pressing the Up or Down
navigation key and press the Select soft key or the
key.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
4. Scroll to Copy All to by pressing the Up or Down
navigation key and press the Select soft key or the
key.
key.
3. Scroll to Management by pressing the Up or Down
navigation key and press the Select soft key or the
key.
5. Highlight Phone or SIM Card and press the Select soft key
or the
key. Contact List appears with all numbers to be
4. Scroll to Sort by Contacts and press the Select soft key or
copied “ticked”.
the
key.
6. Press the Options soft key to display the following options:
33
5. Highlight First Name or Last Name and press the Select
Note: Highlighting All and press the
key checks/unchecks all locations
soft key.
at the same time.
6. When you are finished, press the
key to return to Idle
6. Press the Delete soft key to delete all Contact entries from
mode.
the checked memory location(s).
Delete All
7. At the “Delete?” confirmation screen, press the Yes soft
key to continue, or the No soft key to cancel. When
deleting either a Phone or SIM entry, you are first asked for
password information before completing the deletion
process.
You can delete All, Phone, SIM, and SIM (FDN) entries from your
phone’s memory.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
8. At the “Enter Password” screen, enter your password and
3. Scroll to Management by pressing the Up or Down
navigation key and press the Select soft key or the
key.
press the OK soft key to continue.
9. If you’ve chosen to delete SIM(FDN) information, enter the
PIN2 password and press the OK soft key or the
key.
4. Highlight Delete All and press the Select soft key or the
10. When you are finished, press the
key to return to Idle
key.
mode.
5. Select a memory location by first highlighting the location
Note: PIN2 is assigned by the carrier at time of activation.
you want to empty and then pressing the
a check mark.
key to place
•
You can remove the check mark by pressing the
key.
Understanding Your Address Book
34
Memory Status
You can check how many names and numbers are stored in the
Contacts List, in both SIM card, the phone memory, and SIM
(FDN). You can also see the capacity of both memories.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Management by pressing the Up or Down
navigation key and press the Select soft key or the
key.
4. Scroll to Memory Status by pressing the Up or Down
navigation key and press the Select soft key or the
key.
5. When you are finished viewing your phone’s Memory
Status, press the
key to return to Idle mode.
35
Section 7: Messaging
This section describes how to send or receive different types of
messages. It also includes the features and functionality
associated with messaging.
Creating and Sending New Messages
Text Messages
Your phone supports the following message services:
Tip: Press the Up Navigation key to access the New Message screen.
•
Short Message Service (SMS): allows you to send and receive short
text messages to and from other mobile phones.
1. In Idle mode, press the Menu soft key to access Menu
mode.
•
Enhanced Messaging Service (EMS): allows you to attach simple
pictures, melodies, and animated images to your text messages. To
use this feature, you must subscribe to your service provider’s
message service.
2. Highlight Messaging and press the Select soft key or the
key.
3. Highlight Create New Message and press the Select soft
•
Multimedia Messaging Service (MMS), allows you to include pictures,
melodies, and animated images in your messages. To use this feature,
you may need to subscribe to your service provider’s message service.
key or the
4. Highlight Text Message and press the Select soft key or
the key.
key.
The Message icon (
) displays when you receive new text
messages. When the memory is full, an error message displays
and you cannot receive any new messages. Use the Delete
option in each message box to delete obsolete messages.
more information on entering text into your new message,
see “Entering Text” on page 22.
6. When you have finished writing your message, press the
Options soft key. Choose from the following options:
Messaging
36
•
•
Insert: allows you to add text from any of 10 preset Templates,
Contacts List entry information, or Favorite web sites you have
stored on your phone to your message text.
7. Press the Send To soft key or the
key.
8. Use the keypad to enter up to 20 phone numbers, or press
the Options soft key to select from Contact List, Recent
Recipients, Group, FDN Contacts or Save to (Drafts or My
Folder).
Add Media: allows you to attach pictures, animation, or melody to
your message.
Note: Adding media will send the message as a Multimedia Message
9. Press the Send soft key to send the message.
–
–
Picture: allows you to attach a picture file to your message.
Multimedia Messages
1. In Idle mode, press the Menu soft key to access Menu
Animation: allows you to attach an animation file to your message.
Select between Emotions or My Animations.
–
Melody: allows you to attach a melody file to your message. Select
between Preset Melodies and My Melodies.
mode.
2. Highlight Messaging and press the Select soft key or the
•
•
•
•
Attach: allows you to attach a business card, task, or various
key.
appointment types to the message..
Save to: allows you to save the text message to the Drafts box or to
your My Folder.
3. Highlight Create New Message and press the Select soft
key or the
key.
Select Language: allows you to set the language to English,
Français, or Español.
Note: When creating a message, enter a subject, a picture, a graphic, or an
audio file and press the key.
Input Method: allows you to the text input method to ab, Ab, AB,
T9ab, T9Ab, T9AB, Numeric, or Symbols. (For more information
about text input methods, see “Entering Text” on page 22.)
4. Highlight Multimedia Message and press the Select soft
key or the key. Subject appears highlighted.
•
Text Style: allows you to set the Text Size, Text Style, Bold, Italic,
and Alignment for the text entered.
5. Press the Options soft key to view the following options:
• Back: returns to the Messaging menu with the option to save the
message to the Drafts folder.
• Subject
37
–
–
–
–
–
Add: allows you to add a subject to the message.
Highlight and select Add to choose from images in the
Preview: allows you to preview your messages before sending.
Save to: allows you to save the message to Drafts or My Folder.
Add Page: allows you to add pages to your message.
Downloaded Graphics folder.
7. To add an audio file, use the Up or Down Navigation key
highlight Audio and press the Options soft key to view the
Edit Page: allows you to edit the Duration, Move Page Forward, Move
Page Backward.
following options:
–
–
Attach: allows you to attach a business card, task, or various
appointment types to the message..
• Audio
–
Add: allows you to add newly recorded audio file, a previously recorded
audio file, or a downloaded audio file.
Send settings: allows you to select the Delivery Report, Read Reply,
Priority, Expiration, and Delivery After.
–
–
–
–
Preview: allows you to preview your messages before sending.
Save to: allows you to save the message to Drafts or My Folder.
Add Page: allows you to add pages to your message.
6. To add a picture, Use the Up or Down Navigation key to
highlight Graphics and press the Options soft key to view
the following options:
Edit Page: allows you to edit the Duration, Move Page Forward, Move
Page Backward.
• Graphics
–
–
Attach: allows you to attach a business card, task, or various
appointment types to the message..
–
–
–
–
–
Add: allows you to add a photo you have downloaded.
Preview: allows you to preview your messages before sending.
Save to: allows you to save the message to Drafts or My Folder.
Add Page: allows you to add pages to your message.
Send settings: allows you to select the Delivery Report, Read Reply,
Priority, Expiration, and Delivery After.
Highlight and select the Add option.
Edit Page: allows you to edit the Duration, Move Page Forward, Move
Page Backward.
•
•
Highlight and select Record Audio to launch the Audio Recorder.
–
–
Attach: allows you to attach a business card, task, or various
appointment types to the message..
Highlight and select Recorded Audio to select a audio previously
recorded.
Send settings: allows you to select the Delivery Report, Read Reply,
Priority, Expiration, and Delivery After.
•
Highlight and select Downloaded Audio to choose from the
downloaded audio files.
Messaging
38
8. To add message text, use the Up or Down Navigation key
highlight Message and press the Options soft key to view
the following options:
•
•
Save to
(
Drafts
/
My Folder
)
Change Recipient
(
Cc Bcc
/
)
10. When you have finished entering destination numbers,
press the Send soft key.
• Message
–
–
–
–
–
Add: allows you to add message text.
Receiving and Retrieving New Messages
View a Text Message
Preview: allows you to preview your messages before sending.
Save to: allows you to save the message to Drafts or My Folder.
Add Page: allows you to add pages to your message.
Text messages from other phones are delivered directly to your
phone. Use the following steps to view them.
Edit Page: allows you to edit the Duration, Move Page Forward, Move
Page Backward.
1. In Idle mode, press the Menu soft key and highlight
–
–
Attach: allows you to attach a business card, task, or various
appointment types to the message.
Messaging. Press the Select soft key or the
key.
2. Highlight Inbox and press the Select soft key or the
key. The message list opens. The icons on the left of the
number indicates the message type.
Send settings: allows you to select the Delivery Report, Read Reply,
Priority, Expiration, and Delivery After.
9. Press the Send To soft key to enter a contact. Press the
Options soft key to choose from:
•
: Indicates a Text (SMS/EMS) message.
3. Select a text message on the list. The message content
• Contact List
• Group
displays.
•
•
•
•
FDN Contacts
Recent Recipients
Common Address
Send
4. Press the Up or Down navigation key to scroll through the
message screen.
5. When you have finished, press the
key.
39
Multimedia Messages
•
•
Sort by: allows you to sort by Date, Read/Unread, Sender, Type,
Size, or Subject.
Multimedia messages will be stored in the Inbox of the message
server and the server will alert you to new messages. Therefore
you need to retrieve new messages to your phone and read them
on the phone.
Lock/Unlock: allows you to lock the message to prevent deletion.
4. To scroll through the message, press the Up or Down key.
5. When you have finished, press the
key.
Retrieving a Multimedia Message
Viewing a Multimedia Message
1. In Idle mode, press the Menu soft key and highlight
When a new Multimedia message comes in, the display shows
the Multimedia Message icon (
with the sender’s number.
) and a text notification along
Messaging. Press the Select soft key or the
key.
2. Highlight Inbox and press the Select soft key or the
key. The message list opens. The icons on the left of the
number indicates the message type.
1. Press the View soft key to view brief information about the
message, such as the sender’s number, the message size,
and the subject.
The icons on the left of the number indicate the message
type.
If you want to view the message later in the Inbox, press
the Exit soft key.
•
: Indicates a Multimedia (MMS) message.
2. To view the message, press Option-Retrieve or the
key.
3. Select a multimedia message on the list. The message
3. Press the Options soft key or the
key to access the
content displays.
following options:
4. Press the Left or Right key to scroll through the message
screen. Press the Up or Down key to scroll to other pages,
if the message has more than one page.
•
•
•
View: allows you to view to the message.
Retrieve: retrieves messages from the network.
Delete: allows you to delete the selected message or multiple
messages.
5. When you have finished, press the
key.
Messaging
40
Options for a Message
Multimedia Message Option
Need text for multimedia message option.
Using Message Options
While viewing the contents of the Inbox, press the Options soft
key to access the following options:
•
•
•
•
•
•
•
•
Reply via: allows you to reply to the message.
Reply to all: reply to all the message recipients.
Call Back: allows you to call back the originator of the message.
Forward: allows you to forward the message.
Delete: allows you to delete the message.
Move to My Folder: moves message to My Folder.
Add to Block List: allows you to add the number to the caller Block List.
Extract Address: extracts information from the text message such as:
phone number, email address, or URL and then provides that
information in a listing.
Options for the Inbox
•
•
•
•
•
•
View: allows you to view the message.
Reply via: allows you to reply to the message.
Reply to All: reply to all the message recipients.
Call Back: allows you to call back the originator of the message.
Forward: allows you to forward the message.
Delete: allows you to delete the Selected message or Multiple
messages.
•
•
•
Save Media: saves the multimedia attachments (Graphic, Audio, vCard
and vCalendar).
Lock/Unlock: allows you to lock and unlock the message to prevent
deletion.
•
•
•
•
Move to My Folder: allows you to move the message to the folder
labeled My Folder
.
Properties: shows date from/to CC, size, priority and class for the
Sort by: allows you to sort the messages in your inbox using the (Date,
Read/Unread, Sender, Type, Size and Subject)
Lock/Unlock: allows you to lock and unlock the message to prevent
deletion.
message.
Deleting Messages
You can delete the messages in each message folder(s)
individually or all at one time. You can also delete all of your
messages at one time.
Properties: shows date from/to CC, size, priority and class for the
message.
1. In Idle mode, press the Menu soft key to access Menu
While viewing the content of a single message, press the
Options soft key to access the following options:
mode.
41
2. Highlight Messaging and press the Select soft key or the
2. Highlight Messaging and press the Select soft key or the
key.
key. Highlight Templates and press the Select soft
key or the
key.
3. Using the Up or Down navigation key highlight Delete All
and press the Select soft key or the
key.
3. Highlight a template and press the Options soft key to
access the following options:
4. Select the message folders you want to empty by using the
Navigation keys to highlight the folder and press the
key to mark the folder for deletion.
•
Send via: allows you to send a Text Message or Multimedia
Message using the template.
•
•
Edit: allows you to change the template.
•
To delete all of the messages in all folders, select All Messages
5. Press the Delete soft key.
6. At the “Delete?” confirmation screen, press the Yes soft
key or the key to confirm deletion or press the No soft
.
Delete: deletes the Selected template or Multiple templates.
4. When you have finished, press the
key.
Settings
You can set up various options for using messaging services.
1. In Idle mode, press the Menu soft key to access Menu
mode.
key to cancel deletion.
7. When you have finished, press the
key.
Using Message Templates
2. Select Messaging and highlight Messaging Settings.
Your phone has message templates to allow you to retrieve them
when creating a message. You can change the templates as your
preferences or send a message immediately.
3. Press the Select soft key or the
Text Messages
key.
•
:
–
Send Settings: allows you to set the options for sending text
messages. Choose from the following options: Reply Path, Delivery
1. In Idle mode, press the Menu soft key to access Menu
mode.
Report, Validity Period
,
Message Type, Service Center or Email
Gateway
.
Messaging
42
–
Block Number: allows you to Save the Block Number list, add
numbers from the Contact List or FDN Contacts, or Delete Selected or
All Block Numbers from the list.
•
•
Push Messages: allows you to set the following push message
options: Receive and Service Center
.
Broadcast Messages: allows you to set the following broadcast
message options: Read Activation Channel List Language
•
Multimedia Messages:
,
,
,
.
–
Send Settings: allows you to set options for sending multimedia
messages. Choose from the following options: Delivery Report
Reply Priority Expiration, and Delivery After
Memory Status
You can check the amount of the memory being used and the
memory remaining for Phone and the SIM card.
,
Read
,
,
.
–
Receive Settings: allows you to set the options for receiving
multimedia messages. Choose from the following options:
The display shows the total space including the used and free
space. You can also view how much space is currently occupied
by each message box.
Anonymous Reject
Read Report, and Message Reception
Profiles: allows you to select an MMS profile and to configure profile
settings. Choose from the following options: Profile Name Server
URL Proxy, and GPRS Settings Proxy Address Proxy Port APN
Login ID Password).
Block Number: allows you to Save the Block Number list, add
,
Ads allowed, Send Delivery Report, Send
.
–
,
,
(
,
,
,
,
–
–
–
numbers from the Contact List or FDN Contacts, or Delete Selected or
All Block Numbers from the list.
Message Class: allows you to set MMS receive message class
options. Choose from the following options: Text Only
Imaging, or Moderate Imaging
Creation Mode: allows you to set MMS receive message creation
options. Choose from the following options: Warning Free, and
Restricted
,
Small
.
,
.
• IM: allows you to select the Instant Message service. Choose from
AIM, Windows Live and Yahoo!
43
Section 8: Changing Your Settings
This section explains the sound and phone settings for your
phone. It includes display settings, security settings, and extra
settings associated with your phone.
2. Highlight Settings and press the Select soft key or the
key.
3. Highlight Set Sound and press the Select soft key or the
key. The following options are available. Use the
Down Navigation key to scroll to and set options:
Quick Tips
Quick Tips is a browser-based information service, provided by
AT&T. It contains frequently asked questions about features and
applications and their answers.
Incoming Call
1. In Idle mode, press the Menu soft key and choose the
This menu allows you to make a selection from the following
categories:
Settings menu.
•
Shop Tones: allows you to access the internet to shop for a new
ringtone.
2. Select the Quick Tips options, and press the Select soft
key or the
key.
•
Alert Type: allows you to set the alert default. Choose from Melody,
Vibration, Vibration Then Melody, or Vibration And Melody.
Ring Tone: allows you to select from the default ringtones,
downloaded audio and recorded audio.
The phone opens the MEdia Net browser, and takes you to
the Quick Tips page, which is a free service for AT&T
customers.
•
•
Volume: allows you to set the volume for your ringer to sound when
receiving an incoming call.
Set Sound
You can customize various sound settings.
1. In Idle mode, press the Menu soft key to access Menu
mode.
ᮣ
Press the Left or Right Navigation key to make selection.
Press the Save soft key or the
key to save changes.
Changing Your Settings
44
Keypad Tone
Power On/Off Tone
This menu allows you to select the tone and volume when you
press the keypad.
This menu allows you to enable (Tone 1/Tone 2)/disable (Off) the
melody that the phone sounds when it is switched on and off.
1. Use the Navigation keys to select from On/Off and Key
1. Press the Up or Down Navigation key to make selection.
Tone (Beep, Xylophone).
Press the Save soft key or the
2. To turn off the sound, select Off.
Silent Mode
key to save changes.
2. Use the Navigation keys to increase or decrease the
Volume.
3. Press the Save soft key to keep your settings, or the Cancel
This menu item allows you to select what mode your phone will
soft key to return to the previous screen.
go in when you press and hold the
Vibration or Mute.
key. You can choose
Message Tone
When Vibration is selected your phone will only vibrate.
This menu allows you to select how the phone informs you that a
new Text Message or Multimedia Message has been received.
When Mute is selected your phone will not make a sound or
vibrate.
For each message tone, the following options are available:
3. Press the Up or Down Navigation key to make selection.
•
•
Message Tone: you can select a message tone. (Tones 1-4)
Alert Type: you can select a type of message alert.
4. Press the Save soft key or the
key to save changes.
–
–
–
–
Off: the phone does not use a Message tone.
Melody: the phone sounds the selected message tone.
Vibration: the phone vibrates.
Vibration Then Melody: the phone vibrates then plays the Message
Tone.
Set Display
In this menu, you can change various settings for the display or
backlight.
1. In Idle mode, press the Menu soft key to access Menu
mode.
Press the Left or Right Navigation key to make selection. Press
the Save soft key or the key to save changes.
45
–
–
Text Style: allows you to set the text style for your handset. Choose
from Normal, Outline, or Shadow. Press the Save soft key or the
key to make your selection.
Text Color: allows you to select the color of the text to be displayed on
the Idle screen. Press the Left or Right Navigation keys to make your
2. Select Settings and press the Select soft key or the
key.
3. Select Set Display and press the Select soft key or the
key.
selection. Press the Save soft key or the
selection.
key to make your
The following options are available. Use the Up or Down
Navigation key to scroll to and set options:
•
•
Menu Style: allows you to choose from Grid Menu or List Menu styles.
Pop up List Menu: allows you to turn On or Off the pop-up menus for
Main Display
options with multiple sub menus.
•
Wallpaper: allows you to select the wallpapers.
–
Main Display: allows you to set the wallpaper for the main display.
Press the key to access this option. Choose from the Shop
Graphics, Downloaded Graphics, or the Default Wallpapers. Use the
Left or Right Navigation keys to view all wallpapers. Press the Select
•
•
Dialing Display: Allows you to set the Font Size, the Font Color, and the
Background Color.
Calendar: allows you to turn On or Off the calendar display on the
main display.
soft key or the
Menu Background: press the
key to make your selection.
key to enable the Menu Background
Front Display
–
The front display allows you to set the following settings
Transparency option. The Transparency option allows you to adjust the
amount of picture shown. Choose from 10% - 90% transparency. Press
the Save soft key.
•
•
•
Clock: sets the clock time.
My Image: allows you to set an image to display on the front display.
Screen Slogan: shows the title displayed on your handset. This text
can be changed by the user. Press the Options soft key to select Save
•
Info Display: allows you select the settings for the following:
–
Text Position: allows you to select the position of the text displayed in
Idle mode. Press the Left or Right Navigation keys to make your
selection. Choose from Top, Bottom, or Off. Press the Save soft key or
,
Select Language, or Cancel
.
the
key to make your selection.
Changing Your Settings
46
•
•
Home Zone: allows you to set your a time zone for the handset.
Press the to access the different time zones. When you have
made your selection, press the OK soft key.
Set Time & Date
This menu allows you to change the current time and date
displayed. You can also find out what time it is in another part of
the world.
Time: allows you to enter the current time using your keypad. Press
the Save soft key to save. Use the Up or Down Navigation key to
access the AM/PM option. Use the Left or Right Navigation key to
Note: Before setting the time, you must specify your time zone in the World
select AM or PM. Press the Save soft key or the
selection.
key to save
time menu.
•
•
Date: allows you to enter the current date using your keypad. Press
the Save soft key to save.
1. In Idle mode, press the Menu soft key to access Menu
mode.
Time Format: allows you to change the time format to 12 hours or
24 hours. Use the Left or Right Navigation key to select Time
Format. Press the Save soft key to save.
2. Highlight Settings and press the Select soft key or the
key.
•
Date Format: enter the date format you wish to use when display
the date. Choose from MM/DD/YYYY, DD/MM/YYYY or YYYY/MM/
DD
3. Highlight Set Time & Date and press the Select soft key or
the
key.
4. Press the Save soft key or the
to save your Time &
The following options are available. Use the Down
Date settings.
Navigation key to scroll to and set options:
•
Time Zone Updating: allows you to choose from the following
Note: Automatic updates of time and date does not change the time you have
options, Automatic (connects to the service provider’s network for
set for alarm settings or calendar memos.
time and date), Manual Only, or Prompt First
.
Tip: If Manual Only is selected, the following options are enabled:
47
Shortcuts
Set Phone
Navigation Keys
To customize the settings of your phone use the following steps:
1. In Idle mode, press the Menu soft key to access Menu
mode.
The Shortcuts menu option allows you to change the options
assigned to the Navigation Keys. Press the Options soft key to
Change the assigned shortcut key.
2. Highlight Settings and press the Select soft key or the
Options List
key.
The Options List menu allows you to access the Mobile Email,
Airplane Mode, Applications, Alarm and Calendar. You can also
assign other options to this shortcut list by selecting the <Empty>
option and pressing the Options soft key. Select Define or Remove
All to clear the user defined options.
3. Using the Up or Down Navigation key highlight Set Phone
and press the Select soft key or the
key. The following
options are available:
Language
Light Settings
You can select a display language (English, Français, and Español).
When the language option is set to Automatic, the language is
automatically selected according to the language of the SIM card
used. Depending on your country, service provider, or the
software version of the phone, the Automatic option may not
display.
Important!: Changing light settings may impact the battery life.
Brightness
You can adjust the display brightness for the LCD to see it better
in different lighting conditions.
Press the Save soft key or the
key to save selection.
Press the Left or Right Navigation key or press the Volume keys
to adjust the brightness. Press the Save soft key or the
key
to save selection.
Changing Your Settings
48
Backlight Time
Network Selection (SIM Dependent)
In this menu, you can select the length of time for the Main LCD
backlight On and the Main LCD Dim.
The Network Selection feature enables you to automatically or
manually select the network used when roaming outside of your
home area.
•
Main Display On: Settings available are: 15 seconds, 30 seconds, 1
minute, 3 minutes, and 10 minutes. Press the Save soft key or the
key to save selection.
Note: You can select a network other than your home network only if there is
a valid roaming agreement between the two.
•
Main Display Dim: Settings available are: 15 seconds, 30 seconds, 1
minute, 3 minutes, and Off. Press the Save soft key or the
save selection.
key to
Note: Screen may only be active when roaming outside of your home
country.
Front LCD Contrast
To indicate to automatically or manually select the network to be
used when roaming:
You can adjust the display brightness for the Front LCD to see it
better in different lighting conditions.
1. From the Set Phone menu screen, select Network
Press the Navigation key or press the Up or Down Volume keys
Selection.
to adjust the brightness. Press the Save soft key or the
key
to save selection.
2. Press the Up or Down key until the appropriate option
Greeting Message
highlights, then press the Select soft key or the
key.
This menu allows you to set a greeting to be displayed briefly
when the phone is switched on.
If you select Automatic, you are connected to the first
available network when roaming.
For details about entering characters, see “Entering Text” on
page 22.
If you select Manual, go to step 3.
49
3. Press the Up or Down key until the network you want
highlights and then press the Select soft key or the
key.
General
Show My Number
You can prevent your phone number from being displayed on the
phone of the person being called.
The phone will scan for that network and you will be
connected.
Note: Some networks do not allow you to change this setting.
Airplane Mode
The following options are available:
The Airplane Mode turns your handset off for incoming and
outgoing calls. SMS, MMS, and WAP are not available in Airplane
Mode.
•
•
Set by Network: the default setting provided by the network is used.
Hide Number: your number does not display on the other person’s
phone.
Set Calls
•
Show Number: your number is sent each time you make a call.
This menu option provides the options to answer a call, display a
number, alerts and notifications during calls.
Press the Save soft key to apply changes.
Call Answer
1. In Idle mode, press the Menu soft key to access Menu
The following options are available to answer a call on your
handset.
mode.
2. Highlight Settings and press the Select soft key or the
•
•
Flip Open: allows you to answer the call when you open the phone.
key.
Any Key: allows you to answer the call when you press any key (except
the
key.
3. Select Set Calls and press the
key.
Press the Save soft key to save the selection.
Call Status Tones
The Call Status Tone options are used to notify you for the
Minute Minder (an alert sounds at 1 minute intervals) or the
Changing Your Settings
50
Connection Tone (an alert sounds at the call connection). Use
the key to enable or disable these functions. Press the Save
number. To deactivate, follow the same steps and press the
Deactivate
.
soft key to save the selection.
•
•
Busy: allows you to forward Voice Calls and Data Calls to the
designated number instead of your voice mail number if you are on
another phone call.
Alerts on Call
Use this option to turn On or Off the Alerts on Call option. This will
enable or disable the alert sound. Press the
Save soft key to save the settings.
No Reply: allows you to forward Voice Calls and Data Calls to
the designated number instead of your voicemail number when
there is no answer on your phone. You can choose the time setting
from 5, 10, 15, 20, 25, and 30 seconds).
key or press the
Voice Call
Call Forwarding
•
•
Unreachable: calls are forwarded when you are not in an area
covered by your service provider or when your phone is switched
off.
This network service enables incoming calls to be rerouted to the
number that you specify.
Cancel All: all call forwarding options are canceled.
3. Select the call type, Voice Calls or Data Calls, by pressing
Example: You may wish to forward your business calls to a colleague while
the Up or Down key, and then press the Select soft key or
you are on holiday.
the
key.
To set your call forwarding options:
4. Using the Left or Right Navigation key select Activate.
1. From the Voice Call menu, select Call Forwarding.
Select Deactivate to turn off call forwarding.
2. Select a call forwarding option by pressing the Up or Down
5. Scroll to Forward To, enter or change the number to be
key and then press the Select soft key or the
key. The
called.
following options are available:
•
Forward always: allows you to forward Voice Calls and Data
To enter an international code, press and hold the 0 key
Calls. Press the Select soft key and press the left or right
until the + sign displays.
navigation key to highlight Activate and enter the forwarding
51
6. Press the Select soft key to save changes.
3. Using the Up or Down Navigation key you can Activate or
Deactivate the call waiting feature respectively.
Call Barring (SIM Dependent)
4. Press the Select soft key to apply selection.
The call barring network service allows you to restrict your calls.
This option is SIM dependent and requires a subscription. For
more information, contact your service provider.
Auto Redial
This option allows you to turn Off or On the Auto Redial function.
When the Auto Redial option is enabled, the number will
automatically redial if there is no answer or a busy signal is
reached. Press the Save soft key to save the settings.
Call Waiting
This network service informs you when someone is trying to
reach you during another call.
Set Applications
You can specify individual call waiting options for voice calls and/
or data calls.
The Set Applications feature allows you to configure the
functional parameters for most of the on board applications.
These applications are described in more detail within other
sections of this manual.
To set your call waiting options:
1. From the Voice Call menu screen, select Call Waiting.
2. Select the call type, Voice Calls or Data Calls, to which
the call waiting option is to be applied by pressing the Up
or Down Navigation key and then press the Select soft key
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Settings and press the Select soft key or the
key.
or the
key.
3. Highlight Set Applications and press the Select soft key
The screen informs you whether call waiting is activated or
deactivated.
or the
key.
4. Select the type of application which you want to change.
Select Cancel All to cancel all call waiting features.
•
•
IM Settings
Messaging Settings
Changing Your Settings
52
•
•
Browser Settings
Lock Phone
Record Audio Settings
When the Phone lock feature is enabled, the phone is locked and
you must enter the 4- to 8-digit phone password each time the
phone is switched on.
• Calendar Settings
Address Book Settings
5. Press the Select soft key or the
Security
•
To change the phone password, see “Change Phone Password”
on page 54.
key.
Once the correct password has been entered, you can use the
phone until you switch it off.
The Security feature enables you to restrict the use of your phone
by the others and to restrict the types of calls.
The following options are available:
Various codes and passwords are used to protect the features of
your phone.
•
Off: you are not asked to enter the phone password when you switch
on the phone.
1. In Idle mode, press the Menu soft key to access Menu
•
On: you are required to enter the phone password when you switch on
mode.
the phone.
2. Highlight Settings and press the Select soft key or the
Check PIN Code
key.
When the Check PIN Code feature is enabled, you must enter
your PIN each time you switch on the phone. Consequently, any
person who does not have your PIN cannot use your phone
without your approval.
3. Highlight Security and press the Select soft key or the
key.
The following options are available. Use the Up or Down
Note: Before disabling the PIN Check feature, you must enter your PIN.
Navigation key to scroll to and set options.
The following options are available:
•
Off: you must enter the PIN each time the phone is switched on.
53
Numbers that do not match the conditions in the FDN list will be
restricted. Note: Entering an asterisk (*) is not required for wild card
entries.
•
On: the phone connects directly to the network when you switch it on.
Lock Applications
Using this menu, you can lock the following categories:
•
•
•
•
•
•
All
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display. If the PIN2 code was not provided to you at activation,
please contact your service provider.
Messaging
Recent Calls
Audio
Graphics
Address Book
Change Phone Password
The Change Phone Password feature allows you to change your
current phone password to a new one. You must enter the
current password before you can specify a new one.
Once you have locked the contents, you must enter the phone’s
password to access the associated menus.
Once you have entered a new password, you are asked to
confirm it by entering it again.
Set FDN Mode
Change PIN Code
Set FDN (Fixed Dial Number) mode, if supported by your SIM
card, allows you to restrict your outgoing calls to a limited set of
phone numbers. The following options are available:
This feature allows you to change your current PIN, provided that
the PIN Check feature is enabled. You must enter the current PIN
before you can specify a new one.
•
•
Off: you can call any number.
On: you can only call phone numbers stored in Phone book. You must
enter your PIN2. The following options are available:
Once you have entered a new PIN, you are asked to confirm it by
entering it again.
–
–
Full length entries or wild cards can be entered in to the FDN list.
A full length number with a specific contact name can be entered into
the FDN list.
Change PIN2 Code
The Change PIN2 Code feature allows you to change your current
PIN2 to a new one. You must enter the current PIN2 before you
–
Wildcard entries allow a range of numbers to be dialed with a single
entry: ex. 555 – All dialed numbers that begin with 555 will be allowed.
Changing Your Settings
54
can specify a new one. Once you have entered a new PIN2, you
are asked to confirm it by entering it again.
6. At the “Reset Settings?” prompt, press the Yes soft key
to reset, or the No soft key to cancel. Once your phone has
been reset to its default settings for those selected options,
it will restart itself in order to incorporate the new settings.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
Reset Settings
You can easily reset your phone to its default settings. To reset
your phone:
Note: To completely remove any personal information stored on your device,
see “Precautions for Transfer and Disposal” on page 96.
1. When the Idle screen displays, press the Menu soft key.
Memory Status
2. Highlight Settings and press the Select soft key or the
You can easily check the amount of memory being used for
storing data, such as messages, media, calendar data, or
contacts entries. You can also delete any selected information
from your phone:
key.
3. Highlight Reset Settings and press the Select soft key or
the
key.
1. When the Idle screen displays, press the Menu soft key.
4. Use the Up or Down Navigation key to scroll to and set
2. Highlight Settings and press the Select soft key or the
options. Choose from the following:
key.
•
•
•
•
All
3. Highlight Memory Status and press the Select soft key or
Sound Settings
Display Settings
Phone Settings
the
key.
4. Use the Up or Down Navigation key to view the memory
5. Press the
key to place checkmark adjacent to the
allocation for the following options:
option and pressing the Reset soft key.
•
Shared Memory
55
•
•
•
Messaging
My Stuff
Address Book
Changing Your Settings
56
Section 9: Applications
The topics covered in this section are Games & Apps, My Stuff,
and Tools.
2. Use the Navigation keys to highlight Games & Apps and
press the Select soft key or the key.
3. With the Shop Games option highlighted, press the Select
soft key or the key to launch the WAP browser and
Games & Apps
To access the Games & Apps menu press Menu > Games & Apps
.
The following submenus are listed.
select a file to download. Follow the on-screen options.
The files downloaded will be stored in the My Games &
Apps folder.
Shop Games
ᮣ
Press the Select soft key or the
key to access the online
key to access the online
Games menu.
To access a downloaded or pre-installed game, highlight My
Shop Applications
Games & Apps and press the
the key.
My Stuff
key. Select a game and press
ᮣ
Press the Select soft key or the
Applications menu.
To access preloaded applications and helpful tools. The following
submenus are listed.
My Games & Apps
The Games & Apps menu option allows you to shop using the
WAP browser. You can download new games and applications,
and save them to the My Games & Apps folder. To access the
Games & Apps menu option, use the following steps:
Ringtones / Audio
The Ringtones / Audio menu option allows you to shop tones
using the WAP browser. You can download, record new, and save
to your Downloaded Ringtones folder. To access the Ringtones/
Audio menu option, use the following steps:
1. In Idle mode, press the Menu soft key to access Menu
mode.
1. In Idle mode, press the Menu soft key to access Menu
57
mode.
7. At the “Set as Ringtone?” screen, press either the Yes
soft key (to make the assignment) or press the No soft key
to cancel the selection and return to the previous screen.
2. Use the Navigation keys to highlight My Stuff and press
the Select soft key or the
3. With the Ringtones / Audio option highlighted, press the
Select soft key or the key.
key.
8. From the Ringtone/Audio menu, highlight the Record
Audio option and press
to record a personal audio file.
After recording, press the Options soft key to perform the
4. From the Ringtones/Audio menu, highlight Shop Tones (to
shop for ringtones from the Internet browser),
following:
•
•
•
•
Record: allows you to record a new audio file using the Voice
Downloaded Audio (to select from ringtones downloaded
using the Internet browser), Record Audio (to record a
new audio file), Recorded Audio (to select an existing
recorded audio file), or Default Ringtones (to select from
the pre-loaded ringtones on your phone).
Recorder.
Go to Recorded Audio: allows you to select an existing recorded
audio file.
Send via Multimedia Message: allows you to include a recorded
audio file in an MMS message.
Set as: allows you to set a recorded audio file as a Ringtone, a
5. Highlight an available entry, press the Options soft key and
select Set as to save the selected ringtone as one of the
following:
Caller Ringtone, or an Alarm Tone
.
•
•
•
Delete: allows you to delete a Selected recorded audio file.
Rename: allows you to change the name of a recorded audio file.
•
•
•
Ringtone (the ringtone selected from the default ringtone list)
Caller Ringtone (the ringtone selected for an individual contact)
Alarm Tone
Lock/Unlock: allows you to prevent or permit deletion of a
recorded audio file.
•
Properties: displays the Name, Date, Format, Length, Size, and
Lock/Unlock status of a recorded audio file.
6. Once you have chosen from one of the above options,
press the Select soft key or the key.
Applications
58
Recorded Audio
Graphics
This menu shows a list of saved voice memos. When a voice
memo is recorded and saved, it is stored in the Recorded Audio
folder. To access this menu, use the following steps:
The Graphics menu option allows you to shop graphics using the
WAP browser. You can download new, and save to your
Downloaded Graphics folder. To access the Graphics menu
option, use the following steps:
1. In Idle mode, press the Menu soft key to access menu
1. In Idle mode, press the Menu soft key to access Menu
mode.
mode.
2. Highlight My Stuff and press the Select soft key or the
key. Highlight Ringtones / Audio and press the Select soft
key.
2. Use the Navigation keys to highlight My Stuff and press
the Select soft key or the
key.
3. Highlight Graphics and press the Select soft key or the
3. Highlight Recorded Audio and press the Select soft key or
key.
the
key. A list of voice memos displays.
4. From the Graphics menu, highlight Shop Graphics or
4. Use the Up or Down Navigation key to select a recorded
Downloaded Graphics and press the Select soft key or
memo.
the
key to select from images downloaded using the
5. To play a recording, press the
key.
Internet browser.
6. To exit, press the Back soft key or the
key.
5. From the Graphics menu, highlight Default Wallpapers to
select from the pre-loaded wallpaper on your phone and
press the Select soft key or the
key.
6. Use the Navigation keys to view the available graphics and
wallpapers and press the Save soft key to set the
wallpaper selection.
59
If the recording time expires, the message is automatically
saved. Press the Options soft key to display the following
options:
Applications
Record Audio
Record Audio allows you to record voice memos. It also allows
you to send your audio clip to other people as an attachment of
an MMS message. Recording time is limited to free memory
space available.
•
•
Record: allows you to record another.
Go to Recorded Audio: allows you to go to the recorded
memos.
1. In Idle mode, press the Menu soft key to access menu
• Send via Multimedia Message: allows you to send your memo to
other people by using MMS.
mode.
•
Set as: allows you to set the audio recording as a Ringtone, a
2. Use the Navigation keys to highlight My Stuff and press
Caller Ringtone, or an Alarm Tone.
the Select soft key or the
3. Highlight Applications and press the Select soft key or
the key.
4. Highlight Record Audio and press the Select soft key or
the key.
5. Press the Options soft key and select Record to start
recording, or press the key. Record a memo by
speaking into the microphone.
6. Press the to pause/resume the recording. Press the
Save soft key to stop and save the recording.
key.
•
•
•
•
Delete: allows you to delete the memo.
Rename: allows you to change the name of a voice memo.
Lock/Unlock: allows you to lock or unlock the recorded audio file.
Properties: displays the Name, Date, Format, Length, Size, and
Lock/Unlock status of a voice memo.
7. To exit, press the Back soft key or the
key.
Alarms
This feature allows you to:
•
•
set the alarm to ring at a specific time.
set the phone to switch on automatically and ring the alarm even if the
phone is switched off.
To set the alarm:
Applications
60
1. Highlight Alarms and press the Select soft key or the
or Down Navigation keys to select the day and press the
mark the day. Press the OK soft key to save the changes.
to
key. The following options display:
• Alarm Tone: press the
To set the Alarm Tone, use the Navigation key to select the tone.
Press the Select soft key or the key to make your selection.
key to access the Alarm Tone screen.
•
Wake-up Alarm: the alarm rings to wake you up at the specified
time. This option allows you to set the Snooze option and the days
of the week to be enabled.
• Snooze: use this option to turn on and set the snooze interval.
Choose from Off, 1 Min, 3 Min, 5 Min, 7 Min, or 10 Min.
•
•
•
Alarm 1: primary alarm setting. This option allows you to set the
days of the week for the alarm to sound.
• Repeat: use this option to limit the number of times the alarm
repeats. Choose from 1, 2, 3, 5, or 10.
Alarm 2: secondary alarm setting. This option allows you to set
the days of the week for the alarm to sound.
3. Press the Save soft key to save changes.
Auto Power-u
p: when this option is enabled, the wake-up alarm
will sound even when the phone is powered off.
Tip: To stop the alarm when it rings, open the phone and press any key.
2. Select an alarm type and press the Select soft key or the
key. Set the following options:
Note: Press the OK soft key to turn off the alarm. Press the Snooze soft key
•
Alarm: use the Left or Right Navigation key to turn the Alarm On
to silence the phone for 1, 3, 5, 7, or 10 minutes.
Setting Auto Power-up Alarms
Note: Your phone is preset to a 12-hour format. To change the time format,
see “Set Time & Date” on page 47.
You can set the phone to ring the alarm when the time for an
alarm comes, if the phone is switched off.
• Alarm Time: use the alphanumeric keypad to enter a time for the
alarm to ring.
1. Highlight Alarms and press the Select soft key or the
key. Highlight Auto Power-up and press the Select soft
key.
• AM/PM: use the Left or Right Navigation key to select AM or PM.
• Alarm Day: press the
key to access the Alarm Day screen. To
set the days of the week you wish your alarm to sound, use the Up
61
2. Using the Up or Down Navigation key, highlight On and
4. Enter text in the selected screen and enter the appropriate
information for that selection screen press the Save soft
key.
press the Save soft key or the
key to activate the
Autopower feature.
If the menu option is set to Off, and the phone is switched
The following event types are available:
off at the specified time, the alarm does not ring.
Appointment
To schedule an appointment, use the following options:
3. When you have finished, press the
key.
•
•
•
•
•
Subject: enter the Memo subject using the keypad.
Details: enter the appointment details.
Calendar
The calendar feature allows you to view the Month, Week, and
Day layout views. You can also create Appointment, Anniversary,
Miscellaneous, and Task entries. It also shows any Missed Alarm
Events that have occurred. To access the Calender menu, use the
following steps:
Start Date: enter the start date for the appointment
Start Time: enter the start time for the appointment.
AM/PM: use the Left or Right Navigation key to select AM or PM for
the start time of the scheduled event and press the Save soft key.
End Date: enter the end date for the appointment.
End Time: enter the end time for the appointment.
AM/PM: use the Left or Right Navigation key to select AM or PM for
the start time of the scheduled event and press the Save soft key.
Location: enter the location of the appointment.
Alarm: allows you to set an alarm for this event. Press the
enter an alarm time in the before field, enter the time increment you
wish for the alarm to sound prior to the appointment. Choose from
min, hour, day, or week.
•
•
•
Note: Press the
key to quickly access the Calendar.
1. From the Idle screen, press Menu > My Stuff > Applications
> Calendar and press the Select soft key or the key.
2. Press the Options soft key, highlight Create, and press the
Select soft key or the key.
3. Highlight the event type you wish to create and press the
Select soft key or the key.
•
•
key to
•
Alarm Tone: allows you to choose from 4 pre-loaded alarm tones.
Press the Select soft key.
Applications
62
•
Repeat: in this field, choose to repeat the alarm every Day, every
Week, or every Month. In the until field, enter the date you wish the
alarm to stop.
•
•
•
•
•
Subject: enter the Subject using the keypad.
Details: enter the details applicable to the miscellaneous entry.
Start Date: enter the start date for the miscellaneous entry.
Start Time: enter the start time for the miscellaneous entry.
AM/PM: use the Left or Right Navigation key to select AM or PM for
the start time of the scheduled event and press the Save soft key.
End Date: enter the end date for the miscellaneous entry.
End Time: enter the end time for the miscellaneous entry.
AM/PM: use the Left or Right Navigation key to select AM or PM for
the end time of the scheduled event and press the Save soft key.
Alarm: allows you to set an alarm for this event. Press the
enter an alarm time in the before field, enter the time increment you
wish for the alarm to sound prior to the event. Choose from min, hour,
day, or week.
When you have finished, press the Save soft key.
Anniversary
To schedule an anniversary use the following options:
•
•
•
•
•
•
Occasion: enter the Anniversary Occasion.
Date: enter the Anniversary Date.
Alarm: allows you to set an alarm for this event. Press the
key to
enter an alarm time. In the before field, enter the time increment you
wish for the alarm to sound prior to the anniversary. Choose from day
or week.
•
key to
•
•
•
•
Alarm Time: enter the Alarm Time using the keypad and press the
Save soft key.
AM/PM: use the Left or Right Navigation key to select AM or PM for
the start time of the scheduled event and press the Save soft key.
Alarm Tone: allows you to choose from 4 pre-loaded alarm tones.
Press the Select soft key.
•
Alarm Tone: allows you to choose from 4 pre-loaded alarm tones.
Press the Select soft key.
When you have finished, press the Save soft key.
Task
Repeat Every Year: press the
key to repeat this anniversary
To schedule an task use the following options:
reminder every year.
•
•
•
Task: enter the task using the keypad.
Start Date: enter the start date for the task entry.
Due Date: enter the date the task is due.
When you have finished, press the Save soft key.
Miscellaneous
To schedule an event use the following options:
63
•
•
Priority: enter the priority of the task, choose from High, Normal, or
Low.
•
Settings: allows you to set the Starting Day (Monday or Sunday) and
Default View by Month Week or Day
,
.
Alarm: allows you to set an alarm for this task. Press the
enter an alarm time. In the before field, enter the time increment you
wish for the alarm to sound prior to the task. Choose from day or
week.
key to
Viewing an Event
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Highlight My Stuff and press the Select soft key.
•
•
Alarm Time: enter the Alarm Time using the keypad.
AM/PM: use the Left or Right Navigation key to select AM or PM for
the end time of the task and press the Save soft key.
Alarm Tone: allows you to choose from 4 pre-loaded alarm tones.
Press the Select soft key.
3. Using the Up or Down Navigation key, highlight
Applications and press the Select soft key.
•
4. Highlight Calendar and press the Select soft key or the
key.
When you have finished, press the Save soft key.
The calendar displays with today date highlighted.
Event Options
The following options display when pressing the Options soft key
5. Select the date of the event(s) you want to view and press
after setting an event.
the
key or use the Navigation keys to move to the date
•
•
•
•
View by: allows you to view the details of the event by Day or Week.
Create: allows you to create a new event.
Go to: allows you to view the calendar Today or on a selected Date
Event List: allows you to view an Appointment Anniversary
Miscellaneous or Task
with an assigned event.
.
Note: The icon categories displayed at the bottom display any events
scheduled for the day you selected.
,
,
.
6. Press the Up or Down Navigation key to scroll to the
•
Delete: this option allows you to delete the Selected event, Periods,
previous or next event.
This Month, or All events from the calendar.
7. When you have finished, press the
key.
Applications
64
Tools
3. Enter the operation for your calculation by pressing the
Navigation keys, according to the illustration on the
display.
The Tools menu includes the calculator, converter, timer,
stopwatch, and world time clock. To access this menu, use the
following steps:
4. Enter the second number.
1. From the Applications menu, highlight Tools and press the
5. To view the result, press the
key.
Select soft key or the
key.
Tip Calculator
The following menu items are displayed:
Tip Calculator automatically calculates the following amounts:
Calculator
•
•
Gratuity (tip)
With this feature, you can use the phone as a calculator. The
calculator provides the basic arithmetic functions (addition,
subtraction, multiplication, and division) and provides a number
of higher-level mathematical functions (logarithmic, factorial, and
trigonometric functions).
Individual payment (for groups)
This tool provides an amount based upon the input entered into
the following fields.
1. In the Tools menu, highlight Tip Calculator and press the
Select soft key or the
key. The Tip Calculator screen
1. Highlight Calculator and press the Select soft key or the
appears in the display with the Bill field highlighted.
key.
2. Use the keypad to enter the total amount of the bill.
2. Enter the first number using the numeric keys.
3. If needed, use the Down Navigation key to highlight the
Note: To include a decimal point, press the
parenthesis, press the key. For higher math functions, press the
Options soft key and select the function you want.
key. To include a
Tip(%) field and enter a tip percentage using the keypad.
4. If needed, use the Down navigation key to highlight the #
paying field.
5. Use the keypad to enter the number of persons paying.
65
The following amounts appear in the screen:
•
•
•
Volume
Area
•
Tip($): the tip amount (based upon the tip percentage and the bill
amount).
Temperature
3. Press the Select soft key or the
key.
•
You pay: the amount you pay or each contributor pays.
Converter
4. Use the Navigation keys to select the Units to be converted
From and To.
The conversion menu provides the following conversion
categories:
Tip: You can swap the selected conversion Units by pressing the Options soft
•
•
•
•
•
•
Currency
Length
key, highlighting the Reverse option and pressing the Select soft key or
the
key.
Weight
5. Enter the quantity you want converted in the upper field.
Volume
Area
The converted quantity appears in the lower field.
Temperature
Note: To include a decimal point, press the
key.
To convert a currency, length, weight, volume, area, or
temperature, do the following:
Currency — Reviewing/Editing Exchange Rates
1. Highlight Converter and press the Select soft key or the
The Currency Converter includes long-term average exchange
rates as default values. To review and/or change a default
exchange rate to the current exchange rate, do the following:
key.
2. Highlight one of the following converters:
1. In the Converter menu, highlight Currency and press the
•
•
•
Currency
Length
Select soft key or the
key.
Weight
Applications
66
2. Press the Options soft key, then highlight Currency Rates
and press the Select soft key or the key. The
7. Press the
key to return to the Converter screen.
Currency — Adding Exchange Rates
Currency Rates list appears in the display.
You can use the Currency Converter to convert from and to
obscure currencies by adding exchange rates for these
currencies. To add a currency and its exchange rate to the
Currency Converter, do the following:
3. If needed, use the Left and Right Navigation keys to
change the base currency for the exchange rate you wish
to change.
1. In the Converter menu, highlight Currency and press the
4. Use the Up and Down Navigation keys to highlight a
Select soft key or the
2. Press the Options soft key, then highlight Currency Rates
and press the Select soft key or the key. The
key.
currency whose exchange rate you wish to change.
5. Press the Options soft key, then highlight Edit or Edit
Name and press the Select soft key or the
key. The
Currency Rates list appears in the display with the Base
Edit or Edit Name screen appears in the display.
currency field highlighted.
6. Change the selected exchange rate value or currency
3. Use the Left and Right Navigation keys to select the Base
identifier with the keypad keys and press the Save soft key
currency for the new currency you are adding.
or the
key. You are prompted to confirm saving your
4. Press the Options soft key, then highlight Add and press
changes.
the Select soft key or the
key. The Add Currency
•
Press the Yes soft key to save your changes and return to the
Currency Rates screen.
screen appears in the display with the Enter New
Currency field highlighted.
•
Press the No soft key to discard your changes and return to the
Edit screen.
5. Enter an identifier of up to 10 characters for the new
currency using the keypad. (See “Using Alphabet Mode”
on page 24 for more information.)
Note: To change any other exchange rates, repeat Steps 3 – 6.
67
6. Press the Down Navigation key to highlight the Enter New
3. Use the Up and Down Navigation keys to highlight the
Rate field.
user-added currency exchange rate to be erased.
7. Enter a decimal exchange rate for the new currency using
4. Press the Options soft key, then highlight Delete and
the keypad.
press the Select soft key or the
key. You are prompted
to confirm the deletion.
Note: Press the
key to enter the decimal point.
Note: The Delete option is not available for preloaded Exchange Rates.
The Enter New Rate field only accepts up to six digits after the
decimal point.
•
•
Press the Yes soft key to erase the selected exchange rate.
8. Press the Save soft key or the
key to save the new
Press the No soft key to keep the selected exchange rate.
exchange rate and return to the Currency Rates screen.
You are returned to the Currency Rates list.
Currency — Deleting Exchange Rates
Timer
You cannot delete the preloaded currencies from the Exchange
Rate list. You can delete a currency that you have added to the
list by doing the following:
You can use this menu to set a countdown timer. To enable the
Timer, use the following options:
1. Press the Set soft key to enter the length of time.
1. In the Converter menu, highlight Currency and press the
2. Enter the time and press the OK soft key.
Select soft key or the
2. Press the Options soft key, then highlight Currency Rates
and press the Select soft key or the key. The
key.
3. Press the
key to start the timer. Press the
key to
stop the timer.
Stopwatch
Currency Rates list appears in the display with the Base
currency field highlighted.
You can use this menu to measure intervals of time for up to 4
separate occurrences. Press the key to start the stopwatch.
Applications 68
Press the
erase all times recorded.
to stop the stopwatch. Press the Reset soft key to
Memory Status
The Memory Status menu option allows you to view the usage
and available memory for My Files
and for Calendar, you can view: Appointments
Miscellaneous and Tasks
World Time
-
Images
,
Sounds and Java
;
,
Anniversaries
,
World Time allows you to view the time of day or night in another
parts of the world. World displays time in the 30 different time
zones around the world.
.
To access the Memory Status option, use the following steps:
1. In Idle mode, press the Menu soft key to access Menu
mode.
1. Highlight World Time and press the Select soft key or the
key.
2. Use the Left or Right Navigation keys to browse cities and
2. Use the Navigation keys to highlight My Stuff and press
times.
the Select soft key or the
key.
3. Press the
key to set a selected city or area as the new
3. Highlight the Memory Status menu option and press the
default time zone. The displayed times will shift to reflect
the time zone selected.
Select soft key. Choose from My Files or Calendar.
4. Press the Back soft key to return to the Memory Status
4. Press the Options soft key and highlight Apply Daylight
menu.
Saving Time. Press the Select soft key and make your
selection by pressing the
5. To save your changes, press the Options soft key and
highlight Save. Press the Select soft key or the key.
key.
69
Section 10: WAP
Your phone is equipped with a WAP (Wireless Application
Protocol) browser which allows you to access Internet specified
for mobile phones. This section explains how to access the WAP
services of your service provider and navigate the WAP browser.
Access a WAP Site
There are several ways to access a WAP site:
•
•
Selecting a link on the browser.
Using a bookmark item in the Favorites folder; use the Favorites
option on the browser menu list or Favorites menu.
Entering a URL address manually; use the Go to URL option on the
browser menu list.
Launching the WAP Browser
•
Tip: In Idle mode, press the
key to launch the WAP browser. You can also
press the Menu soft key to access menu mode.
Navigating the WAP Browser
1. To scroll through browser items, press the Up or Down
navigation keys.
1. From the Idle screen, press Menu and highlight MEdia Net
> MEdia Net Home and press the Select soft key or the
key. Your phone is connected to the network and loads
the homepage of the Wireless Web service provider. The
content of the start-up homepage depends on your
Wireless Web service provider.
2. To select a browser item, press the
key or press the
Select soft key.
3. To return to the previous page, press the
key, or
press the Options soft key and choose Back.
2. To scroll through the screen, use the Up and Down
4. To access the browser menu list, press the Menu soft key.
navigation keys.
5. To return to the start-up homepage, press the Menu soft
3. To exit the browser at any time, simply press the
key and select the MEdia Net Home option.
key.
WAP
70
Entering Text in the WAP Browser
Press the Up Navigation key to highlight the Open Wave icon and
press the Options soft key or the key.
When you are prompted to enter text, the currently active text
input mode is indicated on the screen. To change the text input
Note: The menus may vary, depending on your version of the WAP Browser.
mode, press the
key one or more times.
The following modes are available:
The following options are available:
•
•
Upper-Case Alphabet Mode (A): allows you to enter upper-case
characters.
•
•
•
•
•
Enter URL: enter the URL address of a WAP site. After entering an
address, press the Options soft key and then press GO
.
Lower-Case Alphabet Mode (a): allows you to enter lower-case
characters.
Go to Favorites: shows the bookmarks list. You can bookmark the
current page or access previously bookmarked pages.
Go to Messaging: allows you to create a text message, review text
messages in your Inbox, Outbox, Sent, Draft and My Folder.
Go to My Stuff: allows you to view the items stored in the Ringtones/
Audio and Graphics folders, and view your phones Memory Status.
MEdia Net Home: takes you back at any time to the homepage of the
Wireless Web service provider.
Note: You can enter symbols in upper or lower case alphabet mode by
pressing the 1 key.
•
•
T9 Mode (T9): allows you to enter characters by pressing one key per
letter. In this mode, you can use only the
words. To change case, press the
0
key.
key to display alternative
•
•
Back: returns you to the previous menu.
Number Mode (1): allows you to enter numbers.
Show URL: displays the URL address of the page to which you are
currently connected. It also enables you to set the current site as the
startup homepage.
Selecting and Using Menu Options
Various menus are available when you are using the WAP
Browser to navigate the Wireless Web. To access a menu option,
press the menu soft key. A menu list displays.
•
Reload: reloads the current page.
71
4. Highlight an <Empty> location, and press the Add New
Using Favorites
soft key.
While navigating the WAP browser, you can bookmark the site to
quickly and easily access it at a future time. The URL addresses
of the bookmarked sites are stored in the Favorites folder,
wherein you can use the 4-preset URL addresses and store your
favorite URL addresses.
5. Enter a title of the address in the Name field and press the
Down Navigation key.
6. Enter the URL in the URL field.
Accessing a WAP Site Using Favorites
1. In Idle mode, press the Menu soft key to access Menu
mode.
7. Press the Options soft key, highlight the Save option and
press the Select soft key or the
8. When you have finished, press the
Editing a Bookmark
key.
key.
2. Highlight MEdia Net and press the Select soft key or the
key.
1. From the Favorites list, select the bookmark you want to
3. Select Favorites.
change.
4. Select a bookmark item on the Favorite list.
2. Press the Options soft key and select Edit.
Storing a URL Address
3. Change the address and the name, as you would when
storing a new one.
1. In Idle mode, press the Menu soft key to access Menu
mode.
4. Press the Options soft key and select the Save option.
2. Highlight MEdia Net and press the Select soft key or the
5. When you have finished, press the
key.
key.
3. Select Favorites.
WAP
72
Deleting a Bookmark
1. From the Favorites list, select the bookmark you want to
•
The Current Profile allows you to set the options for current
browser profile. Choose from the following options: MEdia Net or
Profiles 2-5
.
delete.
4. Highlight Profile Settings and press the Select soft key or
the key.
2. Press the Options soft key and select Delete.
3. Press the Up or Down Navigation key and select Selected
Clearing the Cache
The cache is the phone’s temporary memory in which the most
recently accessed WAP pages are stored. You can clear the cache
at anytime.
or All then press the Select soft key or the
4. At the “Delete?” confirmation screen, press the Yes soft
key or the key to confirm deletion or press the No soft
key.
1. In Idle mode, press the Menu soft key to access Menu
key to cancel deletion.
mode.
5. When you have finished, press the
key.
2. Highlight MEdia Net and press the Select soft key or the
Changing the WAP Profiles
key.
You can set up server profiles for the WAP browser.
1. In Idle mode, press the Menu soft key to access Menu
mode.
3. Select Clear Cache.
4. Press the Yes soft key or the
key to confirm the
key.
deletion.
2. Select MEdia Net. Highlight Browser Profiles and press
5. When you have finished, press the
the Select soft key or the
3. To change the current browser profile, highlight Current
Profile and press the Select soft key or the key.
key.
73
6. Select the profile you want. For each profile, the following
options are available:
•
Profile Name: enter a name that you wish to assign to the HTTP
proxy server.
•
Home URL: set the address of your startup homepage. When the
default homepage displays, you can delete it using the
and enter your own choice.
key
•
•
Proxy use: set Enable or Disable with the Left or Right navigation
keys.
GPRS Settings: allows you to choose from the following options:
–
–
–
Proxy Address: enter the Proxy address of the proxy server.
Proxy Port: enter a port number or use default setting.
APN: enter the access point name used for the address of the GPRS
network gateway.
–
–
Login ID: enter the User ID required to connect to the GPRS network.
Password: enter the password required to connect to the GPRS
network.
Note: The WAP settings may vary depending on the service provider.
WAP
74
Section 11: Health and Safety Information
Thissectionoutlinesthesafetyprecautionsassociatedwithusing
yourphone.Thesesafetyprecautionsshouldbefollowedtosafely
use your phone.
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC. For body worn
operation, this phone has been tested and meets FCC RF
exposure guidelines when used with an accessory that contains
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
75
no metal and that positions the handset a minimum of 1.5 cm
from the body.
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
information.
GSM 850
•
•
Head : 1.03 W/Kg
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
Body-worn : 1.28 W/Kg
GSM 1900
•
•
Head : 1.13 W/Kg
Body-worn : 1.28 W/Kg
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE
SAR information on this and other model phones can be viewed
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
Health and Safety Information
76
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
In some cases, other researchers have had difficulty in
reproducing those studies, or in determining the reasons for
inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
Under the law, FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
77
the manufacturers of wireless phones to notify users of the
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
•
•
•
Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals.
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
However, many of the studies that showed increased tumor
development used animals that had been genetically engineered
The National Institutes of Health participates in some interagency
working group activities, as well.
Health and Safety Information
78
or treated with cancer-causing chemicals so as to be pre-
disposed to develop cancer in absence of RF exposure. Other
studies exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions under which
people use wireless phones, so we don't know with certainty
what the results of such studies mean for human health.
provide data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide answers
about some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing agent
and the time tumors develop - if they do - may be many, many
years. The interpretation of epidemiological studies is hampered
by difficulties in measuring actual RF exposure during day-to-day
use of wireless phones.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures. However,
none of the studies can answer questions about long-term
exposures, since the average period of phone use in these
studies was around three years.
Many factors affect this measurement, such as the angle at
which the phone is held, or which model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF). FDA has been a leading participant in the World
Health Organization international Electromagnetic Fields (EMF)
Project since its inception in 1996. An influential result of this
work has been the development of a detailed agenda of research
needs that has driven the establishment of new research
programs around the world. The Project has also helped develop
a series of public information documents on EMF issues.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies can
79
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a
wireless phone causes brain tumors or other ill effects.
•
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
Their recommendation to limit wireless phone use by children
was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
Health and Safety Information
80
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims. According to FTC,
these defendants lacked a reasonable basis to substantiate their
claim.
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that hands-
free kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
81
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
•
•
National Radiation Protection Board (UK):
US Food and Drug Administration
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/1/2006):
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
•
•
•
•
•
•
FCC RF Safety Program:
1. Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
Environmental Protection Agency (EPA):
Occupational Safety and Health Administration's (OSHA):
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
National Institute for Occupational Safety and Health (NIOSH):
World Health Organization (WHO):
International Commission on Non-Ionizing Radiation Protection:
Health and Safety Information
82
3. Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes
from the road. If you get an incoming call at an
7. Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with
aware you are driving and suspend conversations that
have the potential to divert your attention from the road.
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving;
if necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice and even heavy
traffic can be hazardous.
8. Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
or medical emergencies.
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1 or
other local emergency number, as you would want others
to do for you.
5. Do not take notes or look up phone numbers while driving.
Jotting down a "to do" list or flipping through your address
book takes attention away from your primary
responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan calls when your car will be stationary. If you need to
make a call while moving, dial only a few numbers, check
the road and your mirrors, then continue.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see a
broken-down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
83
"The wireless industry reminds you to use your phone safely when
driving."
Exposure to very loud sound has also been associated in some
studies with tinnitus (a ringing in the ear), hypersensitivity to
sound and distorted hearing.
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org
.
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
Provided by the Cellular Telecommunications & Internet
Association.
Responsible Listening
You should follow some commonsense recommendations when
using any portable audio device:
Caution!: Avoid potential hearing loss.
•
Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices).
•
When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
•
Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, you
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
Health and Safety Information
84
•
•
Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
•
Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
Voice: (301) 496-7243
Email: [email protected]
National Institute for Occupational Safety and Health
Hubert H. Humphrey Bldg.
You can obtain additional information on this subject from the
following sources:
200 Independence Ave., SW
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
Voice: (800) 222-2336
Email: [email protected]
Internet: http://www.audiology.org
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger. When connecting
the phone or any accessory to another device, read its user's
guide for detailed safety instructions. Do not connect
incompatible products.
85
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
•
•
Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place.
Should read and follow the directions from the manufacturer of your
implantable medical device. if you have any questions about using
your wireless phone with such a device, consult your health care
provider.
UsingYourPhoneNearOtherElectronicDevices
For more information see:
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
Hearing Aid Compatibility with Mobile Phones
Some digital wireless phones may interfere with some hearing
aids. In the event of such interference, you may wish to consult
your hearing aid manufacturer to discuss alternatives.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Persons who have such devices:
•
Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
Should not carry the phone in a breast pocket;
•
•
Should use the ear opposite the implantable medical device to
minimize the potential for interference;
Health and Safety Information
86
Vehicles
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
Posted Facilities
Switch your phone off in any facility where posted notices require
you to do so.
Potentially Explosive Environments
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
3. Press the
key.
87
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
phone warranty if said accessories cause damage or a defect to
the phone.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
Other Important Safety Information
•
Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
FCC Notice and Cautions
FCC Notice
•
•
•
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
Health and Safety Information
88
•
•
Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
Maintaining Your Phone's Peak Performance
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
If you're inside a building, being near a window may give you
better reception.
•
If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
•
•
•
Do not hold, bend or twist the phone's antenna, if applicable.
Do not use the phone if the antenna is damaged.
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
•
•
Speak directly into the phone's receiver.
Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
89
strength on the cellular network and the parameters set by the
network operator.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
•
•
Follow battery usage, storage and charging guidelines found in the
user’s guide.
Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
•
•
If left unused, a fully charged battery will discharge itself over time.
Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
Battery Precautions
•
Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
•
•
Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
•
•
Never use any charger or battery that is damaged in any way.
Do not modify or remanufacture the battery as this could result in
serious safety hazards.
•
If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
Health and Safety Information
90
•
•
Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
•
Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C (32 °F).
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
•
•
Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
•
•
•
•
•
Keep the phone and all its parts and accessories out of the reach of
small children.
Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
•
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
•
•
Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
•
Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
91
•
•
Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
•
•
•
Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
•
If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
Health and Safety Information
92
Section 12: Warranty Information
Standard Limited Warranty
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
What is Covered and For How Long?
SAMSUNGTELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
Phone
1 Year
Batteries
1 Year
Leather Case
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
93
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-987-
4357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
•
•
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
Warranty Information
94
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
95
Precautions for Transfer and Disposal
Samsung Telecommunications America, LLC
1301 East Lookout Drive
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©
2008 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein St.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Warranty Information
96
Index
Using Numbers 25
Using Symbols 25
Using T9 Mode 23
G
Getting Started
Activating Your Phone 3
Voicemail 6
Call Waiting 20, 52
Charging battery 4
Finding an Entry 26
Converter 66
Accessing a Menu Function 21
Alphabet Mode 22
Audio 57
B
Battery
Charging 4
Installation 4
Low Indicator 5
Removal 3
D
H
Dialing a Number
Contacts List 26
I
C
Call Functions
Answering a Call 15
Making a Call 14
Redialing Last Number 14
Silent Mode 17
K
Keypad Tone 45
L
Icons 11
Display Settings 45
Low battery indicator 5
M
Making a Call
Address Book 15
E
End key 13
Ending a Call 14
Entering Text
Changing the Text Input Mode 22
Using Alphabet Mode 24
97
Messages
Missed Call
Deleting 16
Viewing 16
Phone Safety 85
Powering on/off
Phone 6
Standard Limited Warranty
93
Address Book 27, 28
Phone’s Memory 27
SIM Card 28
R
S
Recent Calls 16
Mute 19
N
T
Security Settings 53
Send key 13
Quick Tips 44
Reset Settings 55
Installation 3
Removal 4
Sound Settings 44
Speakerphone Key 18
Speed Dial
Navigation key 12
T9 Mode 22
Network Services
Enter a word 23
Changing 22
Call Forwarding 51
Numeric Mode 22
O
U
Options
During a Call 18
P
Personal Assistant
Alarm 60
Calculator 65
Calendar 62
Phone
Management 32
Own Phone Number 31
Speed Dial 29
Using Contacts List 26
Understanding Your Phone
Closed View of Your Phone 10
Features of Your Phone 8
Open View of Your Phone 8
Icons 11
Setting Up Entries 29
98
Using Management
Deleting all of the Phone book
Entries 34
Sort by Contacts 33
V
Voice Mail
Changing the Number 7
Setup 6
W
Warranty Information 93
99
|