* Some of the contents of this manual may differ from your phone,
depending on the software installed or your service provider.
Printed in Korea
Code No.:GH68-04973A
English. 06/2004. Rev 1.0
World Wide Web
http://www.samsungmobile.com
Contents
Important Safety Precautions .......................... 7
Unpacking ........................................................ 9
Your Phone..................................................... 10
Phone Layout.......................................................... 10
Display................................................................... 13
Service Light........................................................... 16
Getting Started............................................... 18
Charging the Battery................................................ 20
Call Functions................................................. 23
Making a Call .......................................................... 23
Viewing Missed Calls ................................................ 27
Quickly Switching to Silent Mode................................ 29
Selecting Functions and Options..................... 30
Phone Book .................................................... 32
Storing a Number with a Name.................................. 32
Using Phone Book Entry Options................................ 35
Searching for and Dialling a Number in Phone Book...... 36
Editing a Caller Group .............................................. 38
Speed-dialling ......................................................... 39
Deleting All of the Phone Book Entries ........................ 41
Checking the Memory Status..................................... 42
Using the Service Dialling Numbers............................ 43
Entering Text.................................................. 44
Changing the Text Input Mode................................... 45
Using T9 Mode ........................................................ 46
Using Alphabet Mode................................................ 48
Using Number Mode................................................. 49
Using Symbol Mode.................................................. 49
3
Contents
Options During a Call...................................... 50
Using the Menu Functions ......................................... 51
Muting or Sending Key Tones .................................... 53
Sending a Sequence of DTMF Tones ........................... 53
Using the SMS Service.............................................. 54
Call Waiting ............................................................ 55
Making a Multi-party Call .......................................... 55
Accessing a Menu Function by Scrolling ...................... 58
Text Messages................................................ 66
Voice Mail (Menu 1.8)................................................ 75
Broadcast (Menu 1.9)................................................ 76
Multimedia Messages ..................................... 78
Inbox (Menu 2.1) ..................................................... 78
Outbox (Menu 2.2) ................................................... 81
Draft (Menu 2.3) ...................................................... 82
Write New (Menu 2.4) ............................................... 83
Templates (Menu 2.5) ............................................... 87
Delete All (Menu 2.6) ................................................ 88
Memory Status (Menu 2.7) ........................................ 88
Setup (Menu 2.8) ..................................................... 89
MMS Profile (Menu 2.9) ............................................. 90
Call Records ................................................... 92
Missed Calls (Menu 3.1)............................................. 92
Received Calls (Menu 3.2).......................................... 93
Dialled Calls (Menu 3.3) ............................................ 93
Delete All (Menu 3.4) ................................................ 94
Call Time (Menu 3.5)................................................. 95
Call Cost (Menu 3.6) ................................................. 96
4
Contents
Camera........................................................... 97
Sound Settings............................................. 106
Extra Tones (Menu 5.9)........................................... 110
Phone Settings............................................. 111
Infrared Activate (Menu 6.1).................................... 111
Display Settings (Menu 6.2)..................................... 112
Greeting Message (Menu 6.3)................................... 114
Own Number (Menu 6.4) ......................................... 115
Language (Menu 6.5).............................................. 115
Security (Menu 6.6)................................................ 116
Extra Settings (Menu 6.7)........................................ 120
Short Cut (Menu 6.8) .............................................. 121
Reset Settings (Menu 6.9) ....................................... 121
Organiser ..................................................... 122
Alarm (Menu 7.1) ................................................... 122
Calendar (Menu 7.2) ............................................... 124
Time & Date (Menu 7.3) .......................................... 126
Calculator (Menu 7.4).............................................. 128
To Do List (Menu 7.5) ............................................. 129
Voice Memo (Menu 7.6)........................................... 132
Currency Exchange (Menu 7.7)................................. 134
5
Contents
Network Services ......................................... 135
Caller ID (Menu 8.5) ............................................... 141
Band Selection (Menu 8.7)....................................... 143
Funbox ......................................................... 144
Solving Problems.......................................... 156
Access Codes................................................ 159
Phone Password .................................................... 159
PUK ..................................................................... 160
PIN2 .................................................................... 161
PUK2 ................................................................... 161
Barring Password................................................... 162
Health and Safety Information ..................... 163
SAR Certification Information .................................. 163
Precautions When Using Batteries............................ 164
Road Safety.......................................................... 166
Operating Environment........................................... 166
Electronic Devices.................................................. 167
Potentially Explosive Environments .......................... 169
Emergency Calls.................................................... 170
Other Important Safety Information......................... 171
Care and Maintenance............................................ 172
Glossary ....................................................... 174
Index ........................................................... 180
Quick Reference Card................................... 185
6
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching Off When Refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching Off in an Aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch your phone off near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
7
Important Safety Precautions
Sensible Use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency Call
Ensure the phone is switched on and in service. Key
in the emergency number for your present location,
then press the
key. You must deactivate any
unnecessary features before you can make an
emergency call. Give all the necessary information
as accurately as possible. Do not cut off the call
until given permission to do so.
Water Resistance
Your phone is not water-resistant. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories
could damage your phone and may be dangerous.
Qualified Service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see “Health
and Safety Information” on page 163.
CAUTION
RISK OF EXPLOSION IF A BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS.
8
Unpacking
Your package contains the following items:
Travel Adapter
User’s Manual
Handset
Battery
Note: The items supplied with your phone may be
different, depending upon your country or
service provider.
You can obtain the following accessories for your
phone from your local Samsung dealer:
• Standard/slim batteries
• Simple hands-free kit
• Travel adapter
• Ear-microphone
• Data Kit
• Hand strap
• Battery charger
9
Your Phone
Phone Layout
The following illustrations show the main elements
of your phone:
Earpiece
Folder
Display
Navigation (Up/
Down/Left/Right)
keys
WAP browser
key
Soft key (right)
Soft key (left)
Power on/off /
menu exit key
Volume/menu
Cancel/
correction key
Alphanumeric
keys
browse keys
Dial/menu
confirmation key
IrDA port
Microphone
area
Special
function keys
Ear-microphone
jack
Antenna
Camera
Camera key
External display
Service light
10
Your Phone
Key(s) Description
In Menu mode, scrolls through the
menu options and Phone Book.
In Idle mode, allows you to access your
favourite menu options directly. For
further details about shortcuts, see
page 121.
In Menu mode, the Left key returns to
the previous menu level and the Right
key selects the current menu.
When entering text, moves the cursor
to the left and right respectively.
In Idle mode, the Left key allows you to
quickly access the Text Messages
menu and the Right key allows you to
access the Voice Memo menu.
Performs the functions indicated by the
text above them, on the bottom line of
the display.
(soft keys)
In Idle mode, launches the WAP
(Wireless Application Protocol) browser.
Deletes characters from the display.
In Menu mode, returns to the previous
menu level.
Makes or answers a call.
In Idle mode, recalls the last number
dialled or received when held down.
In Menu mode, selects a menu function
or stores information that you have
entered, such as a name in the phone
or SIM memory.
11
Your Phone
Key(s) Description (continued)
Ends a call. Also switches the phone on
and off when held down.
In Menu mode, cancels your input and
returns to Idle mode.
In Idle mode, accesses your voice mail
when held down.
Enters numbers, letters and some
special characters.
Enters special characters.
Performs various functions.
(on the right side of the phone)
In Idle mode, accesses the Camera
menu to allow you to use the camera
application. Turns the camera on when
held down.
In Capture mode, works as a camera
shutter.
(on the left side of the phone)
During a call, adjusts the earpiece
volume.
In Idle mode, with the folder open,
adjusts the keypad tone volume. With
the folder closed, turns the external
display on when held down.
In Menu mode, scrolls through the
menu options and Phone Book.
12
Your Phone
Display
Display Layout
The display has three areas:
Icons
Text and
graphic area
Soft key indicators
Menu
Name
Area
Description
First line
Displays various icons. See
page 14.
Middle lines
Displays messages, instructions
and any information that you
enter, such as the number you are
dialling.
Last line
Shows the current functions
assigned to the two soft keys.
13
Your Phone
Icons
Icon Description
Shows the received signal strength. The
greater the number of bars, the stronger
the signal.
Appears when a call is in progress.
Appears when you are out of your service
area. When it displays, you cannot make or
receive a call.
Appears when you are connected to the
GPRS network.
Appears when you are out of your home
area and have logged onto a different
network; for example, when travelling in
other countries.
Appears when a new text message has
been received.
Appears when a new voice mail message
has been received.
Appears when a new multimedia message
has been received.
Appears when you set an alarm to ring at a
specified time.
Appears when Silent mode is active or
when you set the Alert Type menu (Menu
5.3) so that the phone vibrates when you
receive a call. For further details, see
page 29 and page 107 respectively.
14
Your Phone
Icon Description (continued)
Appears when the IrDA port is active. For
details, see page 111.
Appears when Mute mode is active.
Shows the level of your battery. The more
bars you see, the more power you have
remaining.
Backlight
The backlight illuminates the display and the
keypad. When you press any key or open the folder,
the backlight turns on. It turns off when no keys are
pressed within a given period of time, depending on
your setting in the Back Light menu (Menu
6.2.4). The display turns off after one minute to
conserve your battery power.
To specify the length of time the backlight is active,
set the Back Light menu. See page 113 for further
details.
15
Your Phone
External Display
Your phone has an external display on the folder. It
indicates when you have an incoming call or a
message. It also alerts you at the specified time
when you have set an alarm by turning on its
backlight and showing the corresponding icon on it.
You can select a colour of the image to be displayed
in the Front LCD menu (Menu 6.2.2). See
page 113 for further details.
When the folder is closed, press and hold one of the
Volume keys on the left side of the phone to turn
the display on. You can press the Camera key on
the right side of the phone to take a photo using the
external display.
Service Light
The service light is on the folder. It flashes when
services are available on the phone.
To activate or deactivate the service light, set the
Service Light menu (Menu 6.2.5). See page 113
for further details.
Service light
16
Getting Started
Installing the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available and so on.
Important! The plug-in SIM card and its contacts
can be easily damaged by scratches or
bending, so be careful when handling,
inserting or removing the card.
Keep all SIM cards out of the reach of
small children.
1. If necessary, switch off the phone by holding
down the
displays.
key until the power-off image
2. Remove the battery. To do so:
➀
Slide the battery lock towards the top of the
phone and hold it in that position.
➀
Lift the battery away, as shown.
➀
➀
18
Getting Started
3. Slide the SIM card into the SIM card socket, as
shown, so that it locks the card into position.
Make sure the gold contacts of the card face into
the phone.
Note: When you need to remove the SIM card,
slide it upwards, as shown, and take it out
of the socket.
4. Replace the battery so that the tabs on the end
align with the slots at the bottom of the phone.
19
Getting Started
5. Press the battery down until it clicks into place.
Make sure that the battery is properly installed
before switching the power on.
Charging the Battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter comes with your phone for
charging the battery. Use only approved batteries
and chargers. Ask your local Samsung dealer for
further details.
The travel adapter allows you to use the phone
while the battery is charging, but this causes the
phone to charge more slowly.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
200 minutes.
1. With the battery in position on the phone, plug
the connector of the travel adapter into the jack
at the bottom of the phone.
20
Getting Started
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter
from the power outlet and disconnect it from the
phone by pressing the buttons on both sides of
the connector and pulling the connector out.
➀
➀
➀
Note: You must unplug the adapter before removing
the battery from the phone during charging;
otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, a warning tone sounds and a
message repeats at regular intervals on the display.
When this happens, your phone turns off the
backlight to conserve the remaining battery power.
When the battery level becomes too low, the phone
automatically turns off.
21
Getting Started
Switching the Phone On or Off
1. Open the folder.
2. Press and hold the
switches on.
key until the phone
3. If the phone asks you to enter a password, enter
the password and press the OK soft key. It is
preset to “00000000” at the factory. For further
details, see page 159.
4. If the phone asks for a PIN, enter the PIN and
press the OK soft key. For further details, see
page 160.
The phone searches for your network and, after
finding it, the idle screen appears on the display.
Now, you can make or receive a call.
Note: The display language is preset to English at
the factory. To change the language, use
the Language menu (Menu 6.5). For
further details, see page 115.
5. When you wish to switch the phone off, press
and hold the
displays.
key until the power-off image
22
Call Functions
Making a Call
When the idle screen displays, enter the area code
and phone number, then press the key.
Note: When you activate the Auto Redial option in
the Extra Settings menu (Menu 6.7), the
phone automatically redials up to ten times if
the person does not answer the call or is
already on the phone. See page 120 for further
details.
Making an International Call
1. Press and hold the
0
key.
The character appears.
+
2. Enter the country code, area code and phone
number and press the
key.
Correcting the Number
To clear
Press the
C key.
the last digit
displayed
any other digit in Left or Right key until the
the number
cursor is immediately to the
right of the digit to be cleared.
Press the
C
key. You can also
insert a missing digit simply by
pressing the appropriate key.
the whole display
C
key and hold it for more
than one second.
23
Call Functions
Ending a Call
When you want to end your call, briefly press the
key or close the folder.
Redialling the Last Number
The phone stores the numbers you’ve dialled,
received or missed if the caller is identified. See
“Call Records” on page 92 for further details.
To recall any of these numbers:
1. If you have typed characters on the display,
press the
key to return to Idle mode.
2. Press the
key to display a list of the last
numbers in the order you made or received
them.
3. Use the Up and Down keys to scroll through the
numbers until the number you want highlights.
4. T
o
Press the
dial the number
edit the number
key.
Options soft key and
select Edit. Change the
number, referring to
“Correcting the Number”
on page 23.
delete the number
Options soft key and
select Delete
.
delete all of the
numbers on the
Call Log list
Options soft key and
select Delete All. For
details, see page 94.
24
Call Functions
Making a Call from Phone Book
You can store the phone numbers that you use
regularly in the SIM card or the phone’s memory,
which are collectively called Phone Book. Simply
select a name to recall the associated number. For
further details about the Phone Book features, see
page 32.
Adjusting the Volume
During a call, if you want to adjust the earpiece
volume, use the Volume keys on the left side of the
phone.
Press the
key to increase the volume level and the
key to decrease the level.
In Idle mode, you can also adjust the keypad tone
volume using these keys.
25
Call Functions
Answering a Call
When somebody calls you, the phone rings and
displays the incoming call image.
When the caller can be identified, the caller’s phone
number or name, if stored in your Phone Book,
displays.
1. If necessary, open the folder. Press the
key or
the Accept soft key to answer the incoming call.
When the Anykey Answer option in the Extra
Settings menu (Menu 6.7) is activated, you
can press any key to answer a call except for the
key and the Reject soft key. See
page 120.
When the Active Folder option in the Extra
Settings menu (Menu 6.7) is activated, you
can answer the call simply by opening the folder.
See page 120.
Note: To reject the call, press and hold one of the
Volume keys before opening the folder, or
press the Reject soft key or
key.
2. End the call by closing the folder or pressing the
key.
Note: You can answer a call while using Phone Book
or menu features. After ending the call, the
display returns to the function screen you were
using.
26
Call Functions
Viewing Missed Calls
When you are unable to answer a call for any
reason, you can find out who called you so that you
can call the person back.
The number of calls you missed displays on the idle
screen immediately after a call is missed.
To view the missed call immediately:
1. If the phone is closed, open the folder.
2. Press the View soft key.
The number for the most recent missed call
displays, if available.
3. To
scroll through the
Press the
Up or Down key.
missed calls
call the number
displayed
key.
edit or delete a missed Select soft key. See
call number below.
Editing a Missed Call Number
Note: When the number for the missed call is not
available, the Edit option does not display.
1. Press the Options soft key.
2. Press the Up or Down key to highlight the Edit
option.
27
Call Functions
3. Press the Select soft key.
4. Change the number.
5. To
call the number
store the number
Press the
key.
Save soft key and enter
the name and location.
For further details, see
page 32.
Deleting a Missed Call
1. Press the Options soft key.
2. If necessary, press the Up or Down key to
highlight the Delete option.
3. Press the Select soft key.
You can press the
key at any time to exit the
Missed Call feature.
Note: You can access the Missed Call feature at any
time by selecting the Missed Calls menu
(Menu 3.1). For further details, see page 92.
28
Call Functions
Quickly Switching to Silent Mode
Silent mode is convenient when you wish to stop
the phone from ringing, in a theatre for example.
In Idle mode, press and hold the
key until the
“Silent Mode” message and the Vibration icon (
display.
)
In Silent mode, your phone changes the sound
settings as follows:
Option
New Setting
Alert Type (Menu 5.3
)
Vibration
Keypad Tone (Menu 5.4
Message Tone (Menu 5.5
)
Off
)
Light + Vibration
Folder Tone (Menu 5.6
)
Off
Off
Off
Power off tone
Extra Tones (Menu 5.9
)
To exit and reactivate the previous sound settings,
press and hold the key again until “Exit Silent
Mode” appears. The Vibration icon ( ) no longer
displays.
Notes
:
• When you turn the phone off, Silent mode is
automatically deactivated.
• Activating Silent mode will not turn off the camera
shutter sound.
29
Selecting Functions
and Options
Your phone offers a set of functions that allow you
to customise it. These functions are arranged in
menus and sub-menus, accessed using the two soft
keys marked
and
. Each menu and sub-menu
allows you to view and alter the settings of a
particular function.
The roles of the soft keys vary according to the
function you are currently using; the labels on the
bottom line of the display just above each key
indicates its current role.
Example:
Menu
Name
Press the left soft
key to access Menu
mode.
Press the right soft
key to access the
Phone Book feature.
30
Selecting Functions and Options
To view the various functions and options available
and to select the one you want:
1. Press the appropriate soft key.
2. To
select the:
Press the
Select soft key or
• function displayed
• option highlighted
the Right key.
view the next function Down key or key on
or highlight the next
option on a list
the left side of the
phone.
move back to the
previous function or
option on a list
Up key or
the left side of the
phone.
key on
move back up one
level in the structure
Left key,
C key.
soft key or
exit the structure
without changing the
settings
key.
In some functions, you may be asked for a
password or PIN. Enter the code and press the OK
soft key.
Note: When you access a list of options, your phone
highlights the current option. If, however, there
are only two options, such as On
/Off or
Enable Disable, your phone highlights the
/
option that is not currently active so that you
can select it directly.
31
Phone Book
You can store phone numbers and their
corresponding names in both your SIM card and
your phone’s memories. They are physically
separate but are used as a single entity, called
Phone Book.
Storing a Number with a Name
There are two ways to store a number:
• Using the Save soft key in Idle mode
• Using the New Entry option in the Phone Book
menu
Storing a Number in Idle Mode
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in Phone Book.
1. Enter the number you want to store.
Note: If you make a mistake while entering a
number, correct it using the
further details, see page 23.
C
key. For
2. When you are sure that it is correct, press the
Save soft key.
3. Select an icon to identify the category of the
number to be stored. Three categories are
available:
•
•
•
: Mobile phone number
: Office number
: Home number
To select the category, press the Left or Right
key and press the Select soft key.
32
Phone Book
4. Select a memory location, either SIM or Phone
by pressing the Up or Down key and press the
Select soft key.
,
Note: When you change phones, any numbers
stored in your SIM card memory are
automatically available with the new phone,
whereas any numbers stored in the phone’s
memory must be reentered.
5. Enter a name and press the OK soft key.
For further details about how to enter
characters, see page 44.
6. If you do not want to save the number and
name in the suggested location, press the
C
key
to clear the location number and enter another
location by pressing the number keys.
7. Press the OK soft key to store the name and
number.
After storing, the phone displays the Phone Book
entry or name you just created.
8. To
use the entry options
Press the
Options soft key. For
further details, see
page 35.
return to the idle
screen
key.
33
Phone Book
Storing a Number Using the Phone Book
Menu
1. When the idle screen displays, press the Name
soft key.
2. Scroll to New Entry by pressing the Up or Down
key and press the Select soft key.
3. Select an icon to identify the category of the
number to be stored by pressing the Left or
Right key, and press the Select soft key.
Note: The E-mail icon (
) is available in this
step. It allows you to save an e-mail
address instead of a phone number.
4. Select a memory location, either SIM or Phone
by pressing the Up or Down key and press the
Select soft key.
,
Note: When you are saving an e-mail address,
SIM is not available.
5. Enter a name and press the OK soft key.
For further details about how to enter
characters, see page 44.
6. Enter the number or address you want to store
and press the Save soft key.
7. Continue the procedure from step 6 on page 33
to store the number.
34
Phone Book
Using Phone Book Entry Options
While accessing any Phone Book entry, press the
Options soft key to access the options for the
entry.
To
Press the
select the
Select soft key or the Right
highlighted option
key.
highlight a different Up or Down key until the
option
option you want is
highlighted.
The following options are available:
Paste: allows you to paste the number into the
normal dialling mode. Use this option to dial a
number similar to one in Phone Book, such as a
different extension in the same office.
Use the
see page 23 for further details. When you are ready
to dial, press the key.
C
key to change the number as required;
Edit allows you to edit the name and/or number.
:
Photo Caller ID: allows you to assign one of the
photos you took using the camera as a caller ID
image to be displayed when you receive a call
from the selected number. For details about
camera feature, see page 97.
Delete: allows you to delete the selected number
from Phone Book. You are asked to confirm that you
wish to delete the name and number by pressing
the Yes soft key.
35
Phone Book
Copy: allows you to copy the number to another
location. You can select the memory and the
location number.
Caller Group: allows you to organise your Phone
Book entries in caller groups so that the phone
alerts you in a specific way when a person from one
of your groups calls you. Select one of the ten
groups available.
To remove an entry from a group, select the No
Group option.
For further details about how to change caller group
properties, see page 38.
Add Entry: allows you to add a new number to the
currently selected name.
Searching for and Dialling a Number
in Phone Book
After storing numbers in Phone Book, you can
search for them in two ways; by name and by caller
group.
Searching for a Number by Name
1. When the idle screen displays, press the Name
soft key.
2. Press the Select soft key when Search
highlights. You are asked to enter a name.
3. Enter the first few letters of the name that you
want to find.
The Phone Book entries are listed, starting with
the first entry matching your input.
36
Phone Book
4. To
Press the
view the highlighted View soft key.
entry
select a different
entry
Up or Down key until
the entry you want
highlights.
look for a name
starting with a
different letter
key labelled with the
letter you want.
5. Once you have found the entry, press the
key
to dial the number, or press the Options soft
key to access the Phone Book entry options; for
further details, see page 35.
Searching for a Number by Caller Group
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Group Search by pressing the Up or
Down key and press the Select soft key. You are
asked to enter a group name.
3. Enter the first few letters of the group name that
you want to find.
The caller groups are listed, starting with the
first group matching your input.
4. If necessary, scroll to a group by pressing the Up
or Down key and press the View soft key.
The Phone Book entries in the caller group are
listed.
37
Phone Book
5. To
Press the
view the highlighted View soft key.
entry
select a different
entry
Up or Down key until
the entry you want
highlights.
6. Once you have found the entry, press the
key
to dial the number, or press the Options soft
key to access the Phone Book entry options; for
further details, see page 35.
Editing a Caller Group
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Group Edit by pressing the Up or
Down key and press the Select soft key.
3. Scroll through the group list by pressing the Up
or Down key.
4. When the group you want highlights, press the
Options soft key.
5. Select each option and change the settings, as
you want. The following options are available:
•
Call Ring Tone: allows you to set a ring tone
to be used when you receive a voice call from
a person in the group.
•
SMS Tone: allows you to set a ring tone to be
used when you receive a message from a
person in the group.
38
Phone Book
•
•
Graphic: allows you to set a graphic icon to be
displayed when you receive a voice call from a
person in the group.
Group Name: allows you to assign a name to
the group. For further details about how to
enter characters, see page 44.
6. When you are finished, press the
C
or
key.
Speed-dialling
Once you have stored phone numbers in Phone
Book, you can set up to eight speed-dial entries and
then dial them easily whenever you want, simply by
pressing the associated number key.
Setting Up Speed-dial Entries
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Speed Dial by pressing the Up or
Down key and press the Select soft key.
3. Select the key where you wish to assign the
speed-dialling number, from the
2
to
9
keys,
and press the OK soft key.
Note: Memory location 1 is reserved for your Voice
Mail server number.
If you have already assigned a number to the
key, the Options soft key replaces the OK soft
key. Go to step 6.
4. Select a Phone Book entry from the list and
press the View soft key.
39
Phone Book
5. Select a number, if the entry has more than one,
by pressing the Up or Down key and press the
Select soft key.
6. Once you have assigned a number to the key,
you can use the following options by pressing
the Options soft key:
•
•
•
Change: allows you to assign a different
number to the key.
Delete: allows you to clear the setting so that
no number is assigned to the key.
Delete All: allows you to clear the settings for
all the keys so that no numbers are assigned
to any of the keys.
•
Number: allows you to view the number
assigned to the key.
7. When you are finished, press the
C
or
key.
Speed-dialling from Phone Book
To speed-dial the numbers assigned to the
keys, press and hold the appropriate key.
2
to
9
40
Phone Book
Deleting All of the Phone Book
Entries
You can delete all your entries from your phone’s
memory, your SIM card or both.
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Delete All by pressing the Up or Down
key and press the Select soft key.
3. To place a check mark by the memory location
you want to empty, All SIM or Phone, press
,
the Mark soft key.
You can remove the check mark by pressing the
Unmark soft key.
4. Press the Delete soft key to delete the entries in
the selected memory location.
5. Enter the phone password and press the OK soft
key.
Note: The password is preset to “00000000” at
the factory. To change this password, see
page 117.
6. When the confirming message appears, press
the Yes soft key.
To cancel the deletion, press the No soft key.
7. When you are finished, press the
C
or
key.
41
Phone Book
Checking the Memory Status
You can check how many names and numbers are
stored in Phone Book, in both the SIM card’s and
phone’s memory. You can also see the capacity of
both memory location.
1. When the idle screen displays, press the Name
soft key.
2. Select the Memory Status option by pressing
the Up or Down key and press the Select soft
key.
3. Press the Up or Down key to view the number of
existing and total entries available in the SIM
card and phone’s memory.
4. When you are finished, press the
C
or
key.
42
Phone Book
Using the Service Dialling Numbers
You can view the list of Service Dialling Numbers
(SDN) assigned by your service provider. These
numbers include emergency numbers, directory
enquiries and voice mail numbers.
1. When the idle screen displays, press the Name
soft key.
2. Select the SDN option by pressing the Up or
Down key and press the Select soft key.
3. Scroll through the numbers by using the Up or
Down key.
4. To dial the number displayed, press the Dial soft
key.
Note: This option is available only when your SIM card
supports Service Dialling Numbers.
43
Entering Text
When using your phone, you will often need to
enter text, such as when storing a name in Phone
Book, creating your personal greeting or scheduling
events on your calendar. You can enter
alphanumeric characters by using your phone’s
keypad.
Your phone has the following text input modes:
• T9 mode
This mode allows you to enter words with only
one keystroke per letter. Each key on the keypad
has more than one letter; for example, when you
press the
5
key once, J, K or L displays. T9 mode
automatically compares your keystrokes with an
internal linguistic dictionary to determine the
correct word, thus requiring far fewer keystrokes
than the traditional Alphabet mode.
• Alphabet mode
This mode allows you to enter letters by pressing
the key labelled with the letter you want. Press
the key once, twice, three or four times until it
displays.
• Number mode
This mode allows you to enter numbers.
• Symbol mode
This mode allows you to enter various symbols
and special characters.
44
Entering Text
Changing the Text Input Mode
When you are in a field that allows characters to be
entered, you will notice the text input mode
indicator on the display.
Example: Writing a text message
Write New
Text input
mode indicator
Options
To select
Press the right soft key
until
T9 mode
displays. See page 46.
displays. See page 48.
displays. See page 49.
Alphabet mode
Number mode
Symbol mode
the symbol list displays.
See page 49.
Note: Additional text input modes may be available,
depending on your country.
45
Entering Text
Using T9 Mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes. This
text input mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word
by pressing the
2
to
9
keys. Press each key only
once for each letter.
Example: To enter “HELLO” in T9 mode,
press the and keys.
4,
3,
5,
5
6
The word that you are typing appears on the
display. It may change with each key that you
press.
2. Enter the whole word before editing or deleting
the keystrokes.
3. When the word displays correctly, go to step 4.
If not, press the
0
key or the Up or Down key
repeatedly to display alternative word choices
for the keys that you have pressed.
Example: Both “OF” and “ME” use the
6
and
3
keys. The phone displays the most
commonly used choice first.
Note: Depending on your country, the 0 key may
be not available for scrolling alternative
word choices.
4. Insert a space by pressing the
entering the next word.
key and start
46
Entering Text
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the
word you want to add, press the , Up or Down
key to display the alternative words.
0
2. When you press the
0, Up or Down key at the
last alternative word, the display shows Add on
the bottom line. Press the Add soft key.
3. If necessary, clear the word using the
C
key and
enter the word you want to add using Alphabet
mode. See page 48.
4. Press the OK soft key.
The word is added to the T9 dictionary and
becomes the first word for the associated
keypress.
Note: This feature may not be available for some
languages.
• To enter periods, hyphens or apostrophes, press
the
1
key. T9 mode applies grammar rules to
ensure that the correct punctuation is used.
Example: The key is used twice to display two
1
punctuation marks:
L
E
T
’
S
E
A
T
.
• To shift the case in T9 mode, use the
key.
There are three cases; Capital lock ( ), Lower
case ( ) and Initial Capital ( ).
• You can move the cursor by using the Left and
Right keys. To delete letters, press the
C
key.
Press and hold the key to clear the display.
C
47
Entering Text
Using Alphabet Mode
Use the
1
to
0
keys to enter your text.
1. Press the keys labelled with the letter you want:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
wait for a few seconds for the cursor to move to
the right automatically, and then select the
next letter.
Refer to the table below for further details about the
characters available:
Characters in the Order Displayed
Key
Upper Case
Lower Case
Space
Note: The characters available in Alphabet mode may
be different, depending upon your country.
48
Entering Text
• To insert a space, press the
key.
• To shift the case in Alphabet mode, use the
key. There are three cases; Capital lock ( ),
Lower case ( ) and Initial Capital ( ).
• You can move the cursor by using the Left and
Right keys. To delete letters, press the
C
key.
Press and hold the key to clear the display.
C
Using Number Mode
Number mode enables you to enter numbers into a
text message. Press the keys corresponding to the
digits you want to enter.
Using Symbol Mode
Symbol mode enables you to insert symbols into a
text message.
To
Press the
select a symbol
corresponding number
key.
display more symbols
clear the symbol(s)
Up or Down key.
C
key. When the input
field is empty, this key
returns the display to the
previous mode.
insert the symbol(s)
into your message
OK soft key.
cancel your input and
return to the previous
mode
Back soft key.
49
Options During a Call
Your phone provides a number of control functions
that you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if your network supports this
service.
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want,
by pressing the Unhold soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or
look it up in Phone Book.
For details about searching for a number in
Phone Book, see page 36.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or,
1. Put the current call on hold by pressing the Hold
soft key.
2. Make the second call in the normal way.
50
Options During a Call
When you have an active call and a call on hold, you
may switch between the two calls, changing the one
on hold to active and placing the other on hold.
To switch between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other person.
When you want to finish, end each call normally by
pressing the
key.
Using the Menu Functions
During a call, you can access the main menu
functions.
1. Press the Options soft key.
2. Press the OK soft key when the Menu option
highlights.
3. Press the Up or Down key to scroll through the
menu list.
Note: You cannot use some menus during a call.
They are deactivated on this list.
4. When the menu you want highlights, press the
Select soft key.
5. If the selected menu has sub-options, repeat
steps 3 and 4.
For further details about the menu functions
available, see the list on page 60.
51
Options During a Call
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s
microphone off so that the other person on the
phone cannot hear you.
Example: You wish to say something to another
person in the room but do not want the
person on the phone to hear you.
To switch the microphone off temporarily:
1. Press the Options soft key.
2. Press the Down key to highlight the Mute
option.
3. Press the OK soft key.
The other person can no longer hear you.
To switch the microphone back on:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight the
Unmute option.
3. Press the OK soft key.
The other person can hear you again.
52
Options During a Call
Muting or Sending Key Tones
These options allow you to turn the key tones off or
on. If the Mute Keys option is selected, your phone
does not transmit the DTMF (Dual Tone Multi-
Frequency) tones of the keys, which allows you to
press keys without hearing annoying key tones
during a call.
Note: To communicate with answering machines or
computerised telephone systems, the Send
Keys option must be selected.
Sending a Sequence of DTMF Tones
You can send the DTMF tones after entering the
entire numbers you need to send.
This option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
To send the DTMF tones:
1. When you are connected to the teleservice
system, press the Options soft key.
2. Press the Down key to highlight the Send DTMF
option.
3. Press the OK soft key.
4. Enter the number you want to send and press
the OK soft key.
The tones are sent.
53
Options During a Call
Searching for a Number in Phone
Book
You can search for a number in Phone Book during
a call.
1. Press the Options soft key.
2. Press the Down key to highlight the Phonebook
option.
3. Press the OK soft key.
The Phone Book entries are listed.
4. Enter the name that you wish to find.
If you enter the first few letters of the name, the
Phone Book entries are listed, starting with the
first entry matching your input.
5. To view the highlighted entry, press the View
soft key.
For further details about the Phone Book feature,
see page 32.
Using the SMS Service
If you receive an SMS (Short Message Service)
message during a call, the Message icon (
)
flashes on the display. The SMS Service option
enables you to read the message. You can also
write a new text message.
For further details about the SMS service, refer to
page 66.
54
Options During a Call
Call Waiting
You can answer an incoming call while you have a
call in progress, if your network supports this
service and you have set the Call Waiting menu
(Menu 8.3) to Activate; see page 139. You are
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the Swap
soft key.
3. To end the call on hold, press the Options soft
key and select the End Held Call option.
To end the current call, press the
key.
Making a Multi-party Call
A multi-party call is a network service that allows
up to six people to take part simultaneously in a
multi-party or conference call. For further details
about subscribing to this service, contact your
service provider.
Setting up the Multi-party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
3. To join the first participant to the multi-party
call, press the Options soft key and select the
Join option. Press the OK soft key.
55
Options During a Call
4. To add a new person to the multi-party call, call
the person in the normal way and press the
Options soft key. Select the Join option and
press the OK soft key.
You can add incoming callers by answering the call,
pressing the Options soft key, and selecting the
Join option. Repeat as required.
Having a Private Conversation With One
Participant
1. Press the Options soft key and choose the
Select One option. Press the OK soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing
the Up or Down key, and press the Select soft
key or the
key.
3. When the Private option highlights, press the
OK soft key.
Now you can talk privately to that person. The
other participants can still converse with each
other.
4. To return to the multi-party call, press the
Options soft key and select the Join option.
Press the OK soft key.
All the multi-party call participants can now hear
each other.
56
Options During a Call
Dropping One Participant
1. Press the Options soft key and choose the
Select One option. Press the OK soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing
the Up or Down key, and press the Select soft
key or the
key.
3. Press the Down key to select the Remove
option and press the OK soft key.
The call ends with that participant, but you can
continue to talk to the others.
4. When you want to end the multi-party call, close
the folder or press the
key.
57
Using the Menus
The phone offers a range of functions that allow you
to tailor it to your needs. These functions are
arranged in menus and sub-menus.
The menus and sub-menus can be accessed by
scrolling using the Navigation keys or by using the
shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access
Menu mode.
2. Scroll using the Up or Down key to reach a main
menu, Phone Settings for example. Press the
Select soft key or the Right key to enter the
menu.
3. If the menu contains sub-menus, Language for
example, you can access them by scrolling using
the Up or Down key and pressing the Select
soft key or the Right key.
If the menu that you have selected contains
further options, repeat this step.
4. To
scroll through the
Press the
Up or Down key, or use
the Volume keys.
menus
confirm the chosen
setting
Select soft key or the
Right key.
return to the previous
menu level
soft key or the Left
key.
exit the menu without
changing the settings
key.
58
Using the Menus
Using Shortcuts
The menu items, such as menu, sub-menus and
options, are numbered and can be accessed quickly
by using their shortcut numbers. The shortcut
number is shown at the bottom right next to the
soft key on the display. Simply press the Menu soft
key and enter the number of the menu you want.
Notes
:
• The numbers assigned to each menu are indicated
on the list on page 60. They may not match the
menu number on the phone, depending on the
services supported by your SIM card.
• For the menu number 10, use the
0
key.
Example: Accessing the Language menu.
1. Press the Menu soft key.
2. Press the
3. Press the
6
5
key for Phone Settings
.
key for Language
.
The languages available display.
59
Using the Menus
List of Menu Functions
The following list shows the menu structure
available and indicates the number assigned to
each option and the page where you can find a
description of each feature.
Note: If you use a SIM AT card that provides
additional services, the SIM AT menu displays
when you press the Menu soft key to enter
Menu mode. For further details, see your SIM
card instructions.
1. Text Messages (see page 66)
1.1 Inbox
1.2 Outbox
1.3 Write New
1.4 Templates
1.5 Settings
1.5.1 Setting 1*
*
1.5.2 Setting 2
1.5.3 Common Settings
1.6 Delete All
1.7 Memory Status
1.7.1 SIM Memory
1.7.2 PHONE Memory
1.7.3 CB Memory
1.8 Voice Mail
1.8.1 Connect to Voice Server
1.8.2 Voice Server Number
1.9 Broadcast
1.9.1 Read
1.9.2 Receive
1.9.3 Channel List
1.9.4 Language
* Shows only if supported by your SIM card.
60
Using the Menus
2. Multimedia MSGs. (see page 78)
2.1 Inbox
2.2 Outbox
2.3 Draft
2.4 Write New
2.5 Templates
2.6 Delete All
2.7 Memory Status
2.8 Setup
2.8.1 Delivery Report
2.8.2 Read Reply
2.8.3 Auto Download
2.8.4 Message Acceptance
2.8.5 Hide ID
2.8.6 Expiry Date
2.8.7 Delivery Time
2.8.8 Priority
2.8.9 Report Allowed
2.8.0 Page Duration
2.9 MMS Profile
3. Call Records (see page 92)
3.1 Missed Calls
3.2 Received Calls
3.3 Dialled Calls
3.4 Delete All
3.5 Call Time
3.5.1 Last Call Time
3.5.2 Total Sent
3.5.3 Total Received
3.5.4 Reset Timers
3.6 Call Cost*
3.6.1 Last Call Cost
3.6.2 Total Cost
3.6.3 Max Cost
3.6.4 Reset Counters
3.6.5 Set Max Cost
3.6.6 Price/Unit
* Shows only if supported by your SIM card.
61
Using the Menus
4. Camera (see page 97)
4.1 Take Photos
4.2 My Photos
4.3 Take Videos
4.4 My Videos
4.5 Delete All
4.6 Memory Status
5. Sound Settings (see page 106)
5.1 Ring Tone
5.2 Ring Volume
5.3 Alert Type
5.4 Keypad Tone
5.5 Message Tone
5.5.1 SMS Tone
5.5.2 SMS-CB Tone
5.5.3 MMS Tone
5.6 Folder Tone
5.7 Power On/Off
5.8 Alert on Call
5.9 Extra Tones
6. Phone Settings (see page 111)
6.1 Infrared Activate
6.2 Display Settings
6.2.1 Wallpaper
6.2.2 Front LCD
6.2.3 Menu Style
6.2.4 Back Light
6.2.5 Service Light
6.2.6 Graphic Logo
6.3 Greeting Message
6.4 Own Number
6.5 Language
62
Using the Menus
6. Phone Settings (continued)
6.6 Security
6.6.1 PIN Check
6.6.2 Change PIN
6.6.3 Phone Lock
6.6.4 Change Password
6.6.5 SIM Lock
6.6.6 Privacy
6.6.7 FDN Mode*
6.6.8 Change PIN2
*
6.7 Extra Settings
6.8 Short Cut
6.9 Reset Settings
7. Organiser (see page 122)
7.1 Alarm
7.1.1 Once Alarm
7.1.2 Daily Alarm
7.1.3 Morning Call
7.1.4 Remove Alarm
7.1.5 Autopower
7.2 Calendar
7.3 Time & Date
7.3.1 Set Time
7.3.2 Set Date
7.3.3 World Time
7.3.4 Time Format
7.4 Calculator
7.5 To Do List
7.6 Voice Memo
7.6.1 Record
7.6.2 Memo List
7.6.3 Delete All
7.6.4 Memory Status
7.7 Currency Exchange
* Shows only if supported by your SIM card.
63
Using the Menus
8. Network Services (see page 135)
8.1 Call Diverting
8.1.1 Divert Always
8.1.2 Busy
8.1.3 No Reply
8.1.4 Unreachable
8.1.5 Cancel All
8.2 Call Barring
8.2.1 All Outgoing
8.2.2 International
8.2.3 International Except to Home
8.2.4 All Incoming
8.2.5 Incoming While Abroad
8.2.6 Cancel All
8.2.7 Change Barring Password
8.3 Call Waiting
8.4 Network Selection
8.5 Caller ID
8.6 Closed User Group
8.6.1 Index List
8.6.2 Outside Access
8.6.3 Default Group
8.6.4 Deactivate*
8.7 Band Selection
* Shows only if the Closed User Group Feature is active.
64
Using the Menus
9. Funbox (see page 144)
9.1 WAP Browser
9.1.1 Home
9.1.2 Favorite
9.1.3 http://
9.1.4 Settings
9.1.5 Clear Cache
9.1.6 Push Message
9.2 Games & More
9.3 Sounds
9.4 Images
9.5 Delete All
9.6 Memory Status
9.6.1 Games
9.6.2 Sounds & Images
65
Text Messages
Short Message Service (SMS) allows you to send
and receive short text messages to and from other
GSM mobile phones. In addition, your phone
supports the Enhanced Messaging Service (EMS),
which enables you to include photos, melodies, and
animated images in your messages. To use this
feature, you must subscribe to your service
provider’s message service.
The Text Message icon ( ) appears when you have
received new text messages. If the memory is full,
an error message displays and you will be unable to
receive any new messages. Use the Delete option
in each message box to delete unwanted messages.
Note: In Idle mode, you can quickly access the Text
Message menu by pressing the Left soft key.
Inbox (Menu 1.1)
This message box is used to store any messages
that you have received.
When you enter this menu, the list of messages in
the box displays with the senders’ phone numbers
or names, if available in your Phone Book.
1. Select a message from the list and press the
Select soft key to read the message contents.
2. To scroll through the contents, press the Up or
Down key.
3. To scroll to the previous or next message, press
the
or
key.
66
Text Messages
While reading a message, you can choose the
following options by pressing the Options soft key:
Delete: allows you to delete the message.
Send: allows you to send/resend the message. For
further details about how to send a message, see
page 69.
Text Reply: allows you to reply to the sender.
Call Back: allows you to call the sender back.
Cut Address: allows you to extract the sender’s
number and URL, e-mail addresses or phone
numbers from the message text.
Move to Phone: allows you to move the message
from the SIM card to the phone’s memory. This
option is only available for messages stored in the
SIM card.
Move to SIM: allows you to move the message
from the phone’s memory to the SIM card. This
option is only available for messages stored in the
phone’s memory.
Select Objects: allows you to save media items,
such as sounds or images, from the message into
your phone. You can then use these items when
writing a message. For details, see page 71.
67
Text Messages
Outbox (Menu 1.2)
This message box is used to store any messages
that you have already sent or will send.
When you enter this menu, a list of messages in the
box displays with the recipients’ phone numbers or
names, if available in your Phone Book.
1. Select a message from the list and press the
View soft key to read the message contents.
2. To scroll through the contents, press the Up or
Down key.
3. To scroll to the previous or next message, press
the
or
key.
While reading a message, you can choose the
following options by pressing the Options soft key:
Delete: allows you to delete the message.
Send: allows you to send/resend the message. For
further details about how to send a message, see
page 69.
Cut Address: allows you to extract the destination
number and URL, e-mail addresses or phone
numbers from the message text.
Move to Phone: allows you to move the message
from the SIM card to the phone’s memory. This
option is only available for messages stored in the
SIM card.
Move to SIM: allows you to move the message
from the phone memory to the SIM card. This
option is only available for messages stored in the
phone’s memory.
68
Text Messages
Select Objects: allows you to save media items,
such as sounds or images, from the message into
your phone. You can then use these items when
writing a message. For details, see page 71.
Write New (Menu 1.3)
In this menu, you can write and send text
messages.
Notes
:
• In Idle mode, you can quickly access this menu by
pressing and holding the Left soft key.
• When you add media items to the message, the
number of characters you are allowed to enter
decreases.
Creating a Simple Text Message
1. Create your message.
Note: For further details about entering
characters, see page 44.
2. When you finish entering the message, press
the Options soft key. The following options are
available:
•
Send Only: allows you to send the message.
The message is then deleted after sending.
•
Save and Send: allows you to first save a
copy of the message and then sends the
message. You can read the message in your
Outbox.
•
Save Only: allows you to save the message to
be sent at a later time. You can read the
message in your Outbox.
69
Text Messages
• For further details about Text Formatting
,
Add Objects
,
Add Templates
,
Add
Phonebook
,
Add Bookmark and Language
options, see page 70.
3. Select Send Only or Save and Send, and press
the Select soft key.
If you want to just save the message, select
Save Only. After saving the message, the
phone returns to the Text Messages menu.
4. If you select a save option, choose the memory
location and press the OK soft key.
5. Enter a destination number and press the OK
soft key.
The message is sent.
Note: When the phone fails to send the message, it
asks you if you want to retry. Press the OK soft
key to confirm. Otherwise, press the Exit soft
key to return to the Write New screen.
Creating a Message Using the Options
1. Create a message.
2. Press the Options soft key.
3. Select one of the following options by using the
Up and Down keys and pressing the Select soft
key:
•
Text Formatting: allows you to format the
style of the text.
For the Size attribute, Normal Large and
,
Small sizes are available. For the Underline
and Strikethrough attributes, select On or
Off
.
These attributes can be combined.
70
Text Messages
•
•
Add Objects: allows you to add a sound,
melody, picture or animated image to the
message. Select the category of the object to
be added. In each category, you can select
from the various factory-set items or choose
an item received from other sources, such as
the Internet or other phones.
Add Templates: allows you to apply one of
the preset message templates to the text.
Select one of five messages stored in the
Templates menu (Menu 1.4). For further
details, see page 72.
•
•
•
Add Phonebook: allows you to add a Phone
Book entry to your message. Select one from
the list.
Add Bookmark: allows you to add a web
page address stored in your Favorite list
(Menu 9.1.2). Select one from the list.
Language: allows you to change the language
to be used in T9 input mode. Select the
language to be used.
4. Complete the message, and send or save it by
following the procedure from step 2 on page 69.
71
Text Messages
Templates (Menu 1.4)
Using this menu, you can preset a maximum of five
messages that you most frequently use.
Select an empty location or one of the message
templates and press the Select soft key.
The following options are available:
Edit: allows you to write a new message or edit the
message.
Note: For further details about how to enter
characters, see page 44.
Send Message: allows you to retrieve the
message. Once you have completed the message,
you can send, save and send, or simply save it. For
further details about how to send a message, see
page 69.
Delete: allows you to delete the message. You are
asked to confirm the deletion by pressing the Yes
soft key.
Settings (Menu 1.5)
In this menu, you can set up default message
information. A setting group is a collection of
settings required to send messages. The number of
setting groups available depends on the capacity of
your SIM card.
Notes
:
• The setting options available in this menu may be
different, depending on your service provider.
• The last setting you accessed is automatically
activated for sending messages.
72
Text Messages
Setting x (where
x
is the setting group number):
each group has its own sub-menu.
Service Centre: allows you to store or change the
number of your message centre, which is required
when sending messages. You must obtain this
number from your service provider.
Default Destination: allows you to store the default
destination number. The number automatically
displays on the Destination screen when you create
a message.
Default Type: allows you to set the default message
type to Text Fax, Email or Paging. The network
,
can convert the messages into the selected format.
Default Validity: allows you to set the length of time
your text messages are stored in the message
centre while attempts are made to deliver them.
Setting Name: allows you to give a name to the
setting group currently being defined.
Common Settings: The following options are
available:
Reply Path: allows the recipient of your message to
send you a reply through your message centre, if
your network supports this service.
Delivery Reports: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered.
Bearer Selection: allows you to choose either GSM
or GPRS, depending on your network.
73
Text Messages
Character Support: allows you to choose a
character type from GSM-Alphabet Uni-code or
,
Automatic. If you select Uni-code and your
recipient’s phone does not support it, your recipient
may not be able to read your message.
Delete All (Menu 1.6)
This menu allows you to delete all of the text
messages in each message box. You can also
delete all of your messages at one time.
To
Press the
select a message box Up or Down key. To delete
to clear
all of your messages,
select All Messages
.
place a check mark
Mark soft key.
remove a check
mark
Unmark soft key.
delete the marked
messages
Delete soft key.
When a confirming message displays, press the Yes
soft key to confirm.
Memory Status (Menu 1.7)
This menu shows the memory status and how many
messages are currently stored in the SIM card,
PHONE and CB (Cell Broadcast).
74
Text Messages
Voice Mail (Menu 1.8)
This menu allows you to access your voice mailbox,
if your network supports this service.
The following options are available:
Connect to Voice Server: before using the Voice
Mail feature, you must enter the voice server
number obtained from your service provider; see
menu option
1.8.2. You can then select this option
and press the OK soft key to listen to your
messages.
You can quickly connect to the voice server by
pressing and holding the
1
key in Idle mode.
Voice Server Number: allows you to change the
voice mail server number, if necessary.
To
Press the
enter the server
number
corresponding numeric
keys.
correct a digit
C
key.
move the cursor to the
left or right without
clearing a digit
Left or Right key.
Note: Voice Mail is a network feature. Please contact
your service provider for further details.
75
Text Messages
Broadcast (Menu 1.9)
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Cell Broadcast (CB) messages display as
soon as they are received, provided that:
• the phone is in Idle mode.
• the Receive option is set to Enable
.
• the message channel is currently active on the
channel list.
The following options are available:
Read: lets you view the received message. The
Volatile box displays the messages from the
network, but erases its contents as soon as the
phone is switched off. Scroll through the message
by using the Up and Down keys. While reading a
message, press the Save soft key to store the
message in the Archive box for later retrieval.
Receive: allows you to enable or disable the
reception of broadcast messages.
Channel List: allows you to indicate the channels
from which you wish to receive broadcast
messages. The following options are available:
Select: use to enable or disable channels on the list
by marking or unmarking them respectively. A
check mark displays in front of each selected
channel.
Add Channel: use to enter the ID and title for a new
channel.
Delete: use to remove a channel from the list.
Edit: use to change the ID and title of an existing
channel.
76
Text Messages
Language: allows you to select your preferred
language to display the cell broadcast messages.
Please contact your service provider for further
details.
77
Multimedia Messages
Multimedia Message Service (MMS) is a messaging
service very similar to the Short Message Service
(SMS). It provides automatic and immediate
delivery of personal multimedia messages from
phone to phone or from phone to e-mail.
In addition to the familiar text content of text
messages, multimedia messages can contain
images, graphics, voice and audio clips. An MMS
message is a multimedia presentation in a single
entry. It is not a text file with attachments.
Using the MMS feature, your phone can receive and
send messages that contain multimedia files, such
as your photos, sounds and images you downloaded
from the Internet and voice memos you recorded.
This function is available only if it is supported by
your service provider. Only phones that offer
multimedia message features can receive and
display multimedia messages.
Inbox (Menu 2.1)
Viewing a Message When You Receive it
When a new multimedia message comes in, the
display shows the MMS Message icon (
) and a
text notification along with the sender’s number.
1. Press the Select soft key to view brief
information about the message, such as the
sender’s number, the message size and the
subject.
If you want to view the message later in the
Inbox, press the Exit soft key.
78
Multimedia Messages
2. To scroll through the message information, press
the Up or Down key.
3. Press the Options soft key to use the following
options:
•
Retrieve: retrieves the message from the
MMS server.
•
•
Delete: deletes the message.
More Properties: shows you detailed
information about the message.
4. To read the message, press the Select soft key
when Retrieve is highlighted.
Your phone retrieves the message contents from
the server and displays it.
5. To scroll through the message, press the Up or
Down key.
6. When you are finished, press the
key.
Viewing a Received Message in the Inbox
When you access the Inbox menu (Menu 2.1), a
list of multimedia messages you received displays
with the senders’ phone numbers, if they are
available in your Phone Book, or subjects. The icons
on the left tell you the status of the messages.
•
•
: Messages that have been opened.
: Messages that are unopened.
1. Select a message on the list and press the
Select soft key.
The message displays and scrolls to the next
page, if it has one, after a specified time; for
details about setting the time, see page 89.
79
Multimedia Messages
2. Press the OK soft key to go to the message view
screen.
Or, the display automatically switches to the
screen.
3. To scroll through the message, press the Up or
Down key.
If the message has more than one page, you
can scroll through the pages by using the Left
and Right keys.
While viewing a message, you can choose the
Message options by pressing the Options soft key.
If you are viewing a new message, the options are
the same as when you view a message as soon as it
is received. See the previous section.
When you are reviewing a message retrieved from
the MMS server, the following options are available:
Delete: deletes the message.
Reply: allows you to reply to the sender by sending
a text or multimedia message.
Call Back: allows you to call the sender back.
Cut Address: allows you to extract the sender’s
number or e-mail address and URL, other e-mail
addresses or phone numbers from the message
text.
Forward: allows you to forward the message to
another person.
Save Picture: allows you to save an image from
the message into your phone. Images are stored in
the Images folder (Menu 9.4).
80
Multimedia Messages
Save Sound: allows you to save a sound from the
message into the Sounds folder (Menu 9.3).
Properties: shows you information about the
message, such as the subject, sender’s e-mail
address or phone number, message size, recipient’s
e-mail address or phone number, its priority and the
time and date when the message was received.
Outbox (Menu 2.2)
When you access this menu, the list of multimedia
messages that you sent or saved displays. The
icons on the left tell you the status of each
message.
•
•
•
•
•
: Messages currently being sent
: Messages sent
: Messages your phone couldn’t send
: Messages to be sent
: Messages deferred
1. Select a message on the list and press the
Select soft key.
The message displays and scrolls to the next
page, if it has one, after a specified time; for
details about setting the time, see page 89.
2. Press the OK soft key to go to the message view
screen.
Or, the display automatically switches to the
screen.
81
Multimedia Messages
3. To scroll through the message, press the Up or
Down key.
If the message has more than one page, you
can scroll through the pages by using the Left
and Right keys.
While viewing a message, you can choose the
following options by pressing the Options soft key:
Delete: deletes the message.
Cut Address: allows you to extract the destination
numbers or e-mail addresses and URL, e-mail
addresses or phone numbers from the message
text.
Send: allows you to resend the message.
Edit Message: allows you to change the message
contents, sound, photo or text.
Properties: shows you information about the
message, such as the status, subject, sender’s e-
mail address or phone number, message size, and
the time and date when the message was sent.
Draft (Menu 2.3)
After creating a multimedia message, you can store
it in this message box to be sent at a later time.
For further details about viewing a message, see
“Outbox” on page 81.
82
Multimedia Messages
Write New (Menu 2.4)
This menu allows you to create a new multimedia
message and send to one or multiple destinations.
Creating and Sending a Multimedia
Message
1. Enter the subject of your message and press the
OK soft key.
For further details about entering characters,
see page 44.
2. When Add Here highlights, press the Options
soft key and add the message contents using
one of the following options:
•
Add Text: enter the message text and press
the OK soft key.
•
Add My Photo: allows you to add a photo
taken from using the camera on your phone.
Select Take a Photo to take a new photo, or
Select a Photo to add one of the photos
stored in the phone. For further details about
using the camera, see page 97.
•
•
Add Picture: allows you to add a photo stored
in the Images folder (Menu 9.4). Choose a
photo and press the Select soft key. You can
add downloaded images if they are in correct
format and your service provider supports
them.
Add Sound: allows you to add a sound file.
Select Record to record a new voice memo.
You can add downloaded sounds if your
service provider supports them.
83
Multimedia Messages
•
•
Send: allows you to send the message. Use
this option when you have finished creating
the message.
Save: saves the message in the Draft
(Menu
2.3) or Templates Menu 2.5) box for later
(
use. This option is activated after you add
contents to the message.
•
•
•
Settings: allows you to change the message
settings. For further details about each setting
option, see page 89. After changing the
settings, you need to press the
soft key or
the key to go to back to the options screen.
C
Add Destination: allows you to enter
destination numbers or addresses. See steps 6
to 11. After adding them, you need to press
the
soft key or the
C
key to go to back to
the options screen.
Preview: shows your message as it will
display on the recipient’s phone.
Note: You can add text, an image and a sound
only once for each page.
3. Repeat step 2 until you finish creating your
message.
4. If you want to change the added items, press
the Up or Down key to highlight one and press
the Options soft key.
Note: The options available are different,
depending on whether the item you select
on the message screen is text, an image, a
sound or the Page field.
The following options are available:
•
Edit Text/Picture/Sound: allows you to
change the text or replace the image or sound
with another one.
84
Multimedia Messages
•
Add Page: allows you to add more pages.
After you add a page, the display shows you
the current page number and the memory
space used for the page. You can move to
each page using the Left or Right key on the
message screen.
•
•
Delete: deletes the item from your message.
Duration: allows you to set when an image or
a sound displays on the message presentation
screen and how long it will display for. When
the message is opened, the display shows the
item after a specified time in Set Start Time
and scrolls to the next item after a specified
time in Set Duration
Send: allows you to send the message.
Save: saves the message in the Draft
.
•
•
(Menu
2.3) or Templates
(Menu 2.5) box for later
use.
•
Settings: allows you to change the message
settings. For further details about each setting
option, see page 89.
•
•
Add Destination: allows you to enter
destination addresses. See steps 6 to 11.
Preview: shows your message as it will
display on the recipient’s phone.
5. When you have finished creating the message,
choose Send from the options and press the
Select soft key.
6. Select a destination type, To Cc or Bcc, and
,
press the Select soft key.
85
Multimedia Messages
7. Choose one of the following options and press
the Select soft key:
•
•
•
Phone Number: allows you to enter the
phone number you want.
E-Mail: allows you to enter the e-mail address
of the recipient.
Phone Book: allows you to retrieve a number
from your Phone Book.
8. Enter a number or an e-mail address, or select
a number from Phone Book.
9. When the correct number or address displays,
press the OK soft key.
10. To add a destination, press the Select soft key
when Add Destination highlights. Repeat from
step 7.
If you want to edit the destinations, select one
and press the Select soft key. You can change
or delete it.
11. To enter additional numbers or addresses to the
other destination types, press the
C
key or the
soft key and repeat steps 6 through 10.
You can enter up to 10 destinations each for To
,
Cc and Bcc
.
12. When you are finished entering the
destinations, select Send Message and press
the Select soft key.
Your phone sends the message.
86
Multimedia Messages
Templates (Menu 2.5)
This menu stores messages you saved as templates
so that you can use them to make new messages.
1. Scroll through the template list using the Up and
Down keys.
2. When the message template you want
highlights, press the Select soft key.
3. Press the OK soft key to use the following
options, or the display automatically shows the
options after a specified time:
•
Edit Message: allows you to send a message
using the template. For further details about
how to send a message, see page 83.
•
Delete: allows you to delete the message. You
are asked to confirm the deletion by pressing
the Yes soft key.
4. Press the
key to return to Idle mode.
87
Multimedia Messages
Delete All (Menu 2.6)
This menu allows you to delete all of the multimedia
messages in each message box. You can also delete
all of your messages at one time.
To
Press the
select a message box Up or Down key. To delete
to clear
all of your messages,
select All Messages
.
place a check mark
Mark soft key.
remove a check
mark
Unmark soft key.
delete the marked
messages
Delete soft key.
When a confirming message displays, press the Yes
soft key to confirm.
Memory Status (Menu 2.7)
You can check the amount of the memory being
used and the memory remaining for multimedia
messages.
Each time you press the Next soft key, the display
shows the total space, including the used and free
space. It also shows how much space is currently
occupied by each message box.
88
Multimedia Messages
Setup (Menu 2.8)
You can change the default settings for sending or
receiving multimedia messages.
The following options are available:
Delivery Report: when this option is enabled, the
network informs you whether or not your message
has been delivered.
Read Reply: when this option is enabled, your
phone sends a request for a reply along with your
message to the recipient.
Auto Download: you can set whether or not your
phone retrieves new incoming messages from the
MMS server without notifications. When this option
is enabled, the phone automatically retrieves new
messages from the server. As soon as you receive a
message, you can use more options while you are
reading. See page 80 for further details about the
options.
Message Acceptance: you can specify the
category of messages you want to receive.
Hide ID: when this option is enabled, your phone
number does not display on the recipient’s phone.
Expiry Date: you can select the length of time
your messages are stored in the message centre
after they are sent.
Delivery Time: you can set a delay time before the
phone sends your messages.
Priority: you can select the priority level of your
messages.
89
Multimedia Messages
Report Allowed: when this option is enabled, the
sender of an incoming message receives a delivery
report from the network.
Page Duration: you can set the length of time one
page of a outgoing message displays on the message
presentation screen. After a specified time, the
display automatically scrolls to the next page.
MMS Profile (Menu 2.9)
In this menu, you can configure various network
settings that are required when you send or receive
multimedia messages.
Notes
:
• The last profile you accessed is automatically activated
for sending messages.
• If you change the MMS settings without first checking
with your service provider, the MMS feature may not
work properly.
The following options are available for each profile:
Profile Name: enter a name that you wish to assign
to the MMS server.
Connection URL: enter the address of your MMS
server.
Security: select a data transmission mode. Choose
Secure to protect your data against unauthorised
access; otherwise, choose Non-Secure
.
IP Address: enter the gateway address required to
connect to the MMS server.
User Name: enter the user ID required to connect to
the MMS server.
Password: enter the password required to connect
to the MMS server.
90
Multimedia Messages
APN: enter the access point name used for the
address of the MMS server.
For further details, contact your service provider.
91
Call Records
In this menu, you can view the:
• calls you missed, received or dialled.
• length of your calls.
• cost of your calls.
Notes
• You can access the call records of all three types of
calls by pressing the key in Idle mode.
:
• The number of call records the phone can store may
be different depending on your SIM card.
Missed Calls (Menu 3.1)
This menu lets you view the last 20 calls you
received, but did not answer.
The number or name, if available, displays together
with the time and date when the call was received.
By pressing the Options soft key, you can:
• edit the number, if available, and dial it or save it
in Phone Book.
• delete the call from the list.
You can also dial the number by pressing the
key.
92
Call Records
Received Calls (Menu 3.2)
This menu lets you view the last 20 calls you
received.
The number or name, if available, displays together
with the time and date when the call was received.
By pressing the Options soft key, you can:
• edit the number, if available, and dial it or save it
in Phone Book.
• delete the call from the list.
You can also dial the number by pressing the
key.
Dialled Calls (Menu 3.3)
This menu lets you view the last 20 calls you
dialled.
The number or name, if available, displays together
with the time and date when the call was made.
By pressing the Options soft key, you can:
• edit the number and dial it or save it in Phone
Book.
• delete the call from the list.
You can also dial the number by pressing the
key.
93
Call Records
Delete All (Menu 3.4)
This menu allows you to delete all of the records in
each call record. You can also delete all of your call
records at one time.
To
Press the
select a call record to Up or Down key. To delete
clear
all of your call records,
select All Calls
.
place a check mark
Mark soft key.
remove a check
mark
Unmark soft key.
delete the marked
records
Delete soft key.
When a confirming message displays, press the Yes
soft key to confirm.
94
Call Records
Call Time (Menu 3.5)
This menu lets you view the time log for calls made
and received.
service provider may vary, depending on
network features, rounding-off for billing
purposes and so on.
The following time logs are available:
Last Call Time: length of the last call.
Total Sent: total length of all calls made since the
timer was last reset.
Total Received: total length of all calls received
since the timer was last reset.
Reset Timers: option used to reset the call timers.
You must first enter the phone password and then
press the OK soft key.
Note: The password is preset to “00000000” at the
factory. To change this password, see
page 117.
95
Call Records
Call Cost (Menu 3.6)
This network feature lets you view the cost of calls.
This menu may not be available depending on your
SIM card.
The following options are available:
Last Call Cost: cost of the last call you made.
Total Cost: total cost of all calls made since the
cost counter was last reset. If the total cost exceeds
the maximum cost set in the Set Max Cost option,
you can no longer make any calls until you reset the
counter.
Max Cost: maximum cost set in the Set Max Cost
option. See below.
Reset Counters: option used to reset the cost
counter. You must first enter your PIN2 (see
page 161) and then press the OK soft key.
Set Max Cost: option used to enter the maximum
cost authorised for your calls. You must first enter
your PIN2 (see page 161) and then press the OK
soft key.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls. You must first enter your PIN2
(see page 161) and then press the OK soft key.
96
Camera
Using the camera module embedded in your phone,
you can take photos of people or events while on
the move. You can also send photos to other people
in a multimedia message or set one as a wallpaper.
You can also record videos using the phone as a
camcorder.
Note: You can quickly access the Camera menu by
pressing the Camera key ( ) on the right side
of the phone in Idle mode.
CAUTION
:
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are not
allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Take Photos (Menu 4.1)
In this menu, you can take a photo. The camera
produces JPEG photos.
Note: When you take a photo in direct sunlight or in
bright conditions, shadows may appear on the
photo.
Taking a Photo with the Folder Open
1. Accessing the Take Photos menu turns on the
camera on the folder of the phone. Or you can
press and hold the Camera key (
side of the phone in Idle mode.
)
on the right
The image to be captured appears on the
display.
97
Camera
2. Adjust the image by aiming the camera at the
subject.
• Use the Left and Right keys to adjust the
brightness of the image.
• Use the Up and Down keys to zoom in or out.
• Use the Volume keys on the left side of the
phone to flip the image vertically or
horizontally.
• Use the
1
key to switch to Record mode. See
page 103.
• Use the
• Use the
• Use the
2
3
4
key to change the image size.
key to change the image quality.
key to switch to Night Shot mode.
• To use the camera options, press the right soft
key. For details, see page 99.
3. Press the left soft key or Camera key to take the
photo.
4. Press the Save soft key.
To discard the photo and return to Capture
mode, press the Cancel soft key.
5. To
use the photo
Press the
Options soft key. For
further details, see
below.
options
return to Capture
mode
Preview soft key or
key.
C
return to Idle mode
key.
98
Camera
When you press the Options soft key after saving a
photo, the following options are available:
Send: allows you to send the photo using a
multimedia message. For further details, see
page 83.
Set as: allows you to set the image as your
wallpaper for the idle screen or a caller ID image for
Phone Book entries.
Rename: allows you to change the name of the
photo.
Go to My Photos: allows you to view the photos
you took in the My Photos menu (Menu 4.2).
Delete: deletes the photo.
Protection: allows you to protect the photo from
being deleted.
Properties: shows the properties of the photo,
such as the file name, file size, time and date it was
saved, resolution and quality.
Using the Camera options
In Capture mode, you can use various options by
pressing the right soft key.
To
Press the
scroll to an option
Up or Down key.
select the highlighted Select soft key or the
option
Right key.
return to Capture
mode
soft key or
C
key.
99
Camera
The following options are available:
Mode: allows you to take a photo in various modes.
Once you change the mode, its indicator appears at
the top left or centre of the display.
Normal Shot: allows you take a photo in the normal
mode.
Multi Shot: allows you to take a series of action
stills. Select the capture speed, High Speed or
Normal Speed, and the number of photos the
camera will take. When you press the Camera key,
the camera takes photos successively.
After taking photos, press the SaveAll soft key to
save all of them or the Select soft key to save the
selected one(s).
Matrix Shot: allows you to take several stills and
save them in one frame. It will save as one image
consisting of the multiple stills taken.
Night Shot: allows you to take a photo of the best
quality when it is dark.
Effects: allows you to change the colour tone or
apply special effects to the photo.
Frames: allows you to use a decorated frame.
Select a frame from the list using the Navigation
keys.
Timer: allows you to have a delay time before the
camera takes a photo. Select the length of time you
want. When you press the Camera key, the camera
takes the photo after a specified time.
Settings: allows you to change the default settings
for taking a photo.
Photo Size: allows you to select a photo size.
100
Camera
Photo Quality: allows you to change the image
quality.
Shutter Sound: allows you to select a sound when
you press the shutter, the left soft key or Camera
key.
Default Name: allows you to change the default
prefix of the photo name.
Help: shows you the functions of the keys you can
use.
Taking a Photo with the Folder Closed
1. Close the folder.
2. To turn the camera on, press and hold the
Camera key on the right side of the phone.
The image to be captured appears on the
external display.
3. Adjust the image by aiming the camera at the
subject.
• Use the
key on the left side of the phone to
adjust the brightness of the image.
• Use the
key on the left side of the phone to
zoom in or out.
4. Press the Camera key to take the photo.
The photo is automatically saved in the My
Photos menu (Menu 4.2).
101
Camera
My Photos (Menu 4.2)
This menu allows you to review your photos. When
you access this menu, your phone displays them in
Thumbnail mode, which shows photos as small
images.
Scroll through the photos using the Navigation
keys. The
icon indicates that it contains the
photos taken in Multi-shot mode. To view the
photos on the full screen, press the View soft key.
In this mode, you can scroll through the photos
using the Left and Right keys. To go back to
Thumbnail mode, press the Multi soft key.
Press the Options soft key to use the following
options:
Send: allows you to send the photo as a
multimedia message. For further details, see
page 83.
Set as: allows you to set the image as your
wallpaper for the idle screen or a caller ID image for
Phone Book entries.
Rename: allows you to change the name of the
photo.
Delete: deletes the photo.
Protection: allows you to protect the photo from
being deleted.
Properties: shows the properties of the photo,
such as the file name, file size, time and date it was
saved, resolution, quality and protection status.
102
Camera
Take Videos (Menu 4.3)
You can record a video that is currently displayed on
the camera screen and save it as an MJPEG file.
Recording a Video
1. When the camera turns on, adjust the image by
aiming the camera at the subject.
• Use the Left and Right keys to adjust the
brightness of the image.
• Use the Up and Down keys to zoom in or out.
• Use the Volume keys on the left side of the
phone to flip the image vertically or
horizontally.
2. Press the left soft key to start recording.
3. When you are finished, press the left soft key.
The phone automatically stops when the
recording time expires. You can cancel your
recording by pressing the right soft key.
4. Press the Save soft key.
The video is saved and the display returns to
Record mode.
103
Camera
My Videos (Menu 4.4)
When you access this menu, the thumbnail images
of the videos display.
To play a video:
1. Press the Navigation keys to scroll to the video
you want to view.
2. Press the Play soft key to start playing the
video.
3. To
pause the playing
Press the
Pause soft key.
Continue soft key.
resume
stop
Stop soft key or
C
key.
return to Idle mode
key.
Press the Options soft key to use the following
options:
Rename: allows you to change the file name.
Delete: deletes the current video file.
Protection: allows you to protect the video from
being deleted.
Properties: show the properties of the video file,
such as the time and date it was saved, file size,
protection status and playing time.
104
Camera
Delete All (Menu 4.5)
This menu allows you to delete all of your photos or
videos. You can also delete all of them at one time.
To
Press the
select an item to
clear
Up or Down key. To delete
all of contents, select All
.
place a check mark Mark soft key.
remove a check
mark
Unmark soft key.
delete the marked
items
Delete soft key.
When a confirming message displays, press the Yes
soft key to confirm.
Memory Status (Menu 4.6)
You can check the amount of memory being used
and the memory remaining in the camera.
Each time you press the Next soft key, the display
shows the total, free and used space for photos and
videos.
105
Sound Settings
You can use the Sound Settings feature to
customise various settings, such as the:
• ring melody, volume and type.
• sounds made when you press a key, receive a
message, open/close the folder or switch your
phone on or off.
• alert tone made every minute during a call, when
you make an error or when your call is connected
to the system.
Note: When the phone is in Silent mode (see
page 29), you cannot change the sound
settings.
Ring Tone (Menu 5.1)
This menu allows you to select a ring melody.
You can choose between many different melodies. If
you have downloaded sounds from the WAP
browser or the optional EasyGPRS programme, you
can use them in this menu.
Ring Volume (Menu 5.2)
This menu allows you to adjust the ring volume to
one of five levels.
Use the Up and Down keys or the Volume keys on
the left side of the phone to increase or decrease
the volume.
106
Sound Settings
Alert Type (Menu 5.3)
This menu allows you to specify how you are to be
informed of incoming calls or alarms you set.
The following options are available:
Light Only: the service light flashes; the phone
neither rings nor vibrates.
Melody: the phone rings using the selected ring
tone or alarm melody.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
Keypad Tone (Menu 5.4)
This menu allows you to select the tone that the
phone sounds when you press a key.
To turn the sound off, select Off
.
107
Sound Settings
Message Tone (Menu 5.5)
This menu allows you to select how the phone
informs you that a new message has been received.
SMS Tone (Menu 5.5.1)
The following options are available for alerting you
to new SMS messages:
Off: the phone does not use an SMS tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS Tone x: the phone uses one of several SMS
tones.
SMS-CB Tone (Menu 5.5.2)
The following options are available for alerting you
to new cell broadcast (CB) messages:
Off: the phone does not use a CB tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS-CB Tone x: the phone uses one of several CB
tones.
MMS Tone (Menu 5.5.3)
The following options are available for alerting you
to new MMS messages:
108
Sound Settings
Off: the phone does not use an MMS tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
MMS Tone x: the phone uses one of several MMS
tones.
Folder Tone (Menu 5.6)
This menu allows you to select the tone that the
phone sounds when you open or close the folder.
To turn the sound off, select Off
.
Power On/Off (Menu 5.7)
This menu allows you to select the melody that the
phone sounds when it is switched on or off.
To turn the sound off, select Off
.
Alert on Call (Menu 5.8)
This menu allows you to choose whether or not the
phone informs you when you receive a new
message or when an alarm goes off during a call.
Off : the phone doesn’t actively alert you to
incoming messages or alarms. It only displays the
corresponding notification.
On : the phone alerts you with a beep and displays
the corresponding notification.
109
Sound Settings
Extra Tones (Menu 5.9)
You can customise additional tones used for the
phone.
To turn a given
tone
Press the
on
On soft key.
A check mark displays in
front of the option.
off
Off soft key again.
The check mark no longer
displays.
The following options are available:
Error Tone: sets whether or not the phone informs
you when a mistake is made.
Minute Minder: sets whether or not the phone
beeps every minute during an outgoing call to keep
you informed of the length of your call.
Connect Tone: sets whether or not your phone
beeps when your call is connected to the system.
110
Phone Settings
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed in the Phone Settings
menu.
Infrared Activate (Menu 6.1)
This feature allows you to send or receive data
through the infrared port. To use an infrared
connection, you must:
• configure and activate an IrDA-compliant infrared
port on your PC.
• activate the infrared feature on the phone; the
IrDA icon ( ) appears on the top line of the
display.
• align the IrDA port on the phone with the IrDA
port on your computer.
IrDA port
IrDA port
The connection is ready for data transmission.
If there is no communication between your phone
and the IrDA-compliant device within 30 seconds of
activating the feature, it is automatically
deactivated.
Note: For optional performance, use an optional data
link cable. You can purchase one from your local
Samsung dealer.
111
Phone Settings
Display Settings (Menu 6.2)
In this menu, you can change various settings for
the display or backlight.
Wallpaper (Menu 6.2.1)
This menu allows you to change the background
image or the colour of the text to be displayed in
Idle mode.
The following options are available:
Wallpaper List: you can select a background
image to be displayed on the idle screen.
To change the background image:
1. Scroll through the list by pressing the Up or
Down key.
You have various preset images available. You
can also select a blank background or any
images downloaded from the Internet, WAP
browser and optional EasyGPRS programme or
received in messages. Once you have set a
photo as the wallpaper, it displays as My Photo
on this list.
2. Press the Select soft key when the image you
want highlights.
3. When the image displays, press the Select soft
key to display it on the idle screen.
Text Display: you can specify whether or not the
phone displays the time and date on the idle
screen.
Text Color: you can select the colour of the text to
be displayed on the idle screen.
112
Phone Settings
Front LCD (Menu 6.2.2)
This menu allows you to select a colour for the
default image to be displayed on the external
display.
Menu Style (Menu 6.2.3)
This menu allows you to select the menu display
style. You can choose either Bar Style or Page
Style
.
Back Light (Menu 6.2.4)
You can select the length of time the backlight is on
for. The backlight turns on when you press a key,
when you open the folder or when you receive a call
or message and remains on for the specified length
of time.
Service Light (Menu 6.2.5)
This menu allows you to select whether or not the
service light is used. It also allows you to select a
colour in which it flashes.
Select one of the seven colour settings. When the
phone is ready for use, the service light flashes in
the chosen colour.
If you do not wish to use the service light,
select Off
.
113
Phone Settings
Graphic Logo (Menu 6.2.6)
This menu allows you to display your service
provider’s logo instead of its name.
Off: the service provider’s name displays in Idle
mode.
On: the service provider’s logo stored in your phone
displays in Idle mode; if no logo has been stored,
the service provider’s name displays.
Greeting Message (Menu 6.3)
This menu allows you to set a greeting to be
displayed briefly when the phone is switched on.
To
Press the
C key and hold it down
until the message is
cleared.
clear the existing
message
enter a new
message
appropriate alphanumeric
keys.
change the text
input mode
right soft key.
For further details about how to enter characters,
see page 44.
114
Phone Settings
Own Number (Menu 6.4)
This function is a memory aid, which you can use to
check your own phone numbers if you need to do so.
You can:
• assign a name to each of your own phone
numbers registered on your SIM card.
• edit the names and numbers.
Any changes made here do not in any way affect
the actual subscriber numbers on your SIM card.
Language (Menu 6.5)
You can select a display language. When the
language option is set to Automatic, the language
is automatically selected according to the language
of the SIM card used.
Note: Depending upon your country, service provider
or software version of the phone, the
Automatic option may not display.
115
Phone Settings
Security (Menu 6.6)
The Security feature enables you to restrict the use
of your phone by others and restrict the types of
calls made.
Various codes and passwords are used to protect
the features of your phone. They are described in
the following sections. Also see pages 159-162.
PIN Check (Menu 6.6.1)
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
The following options are available:
Disable: the phone connects directly to the
network when you switch it on.
Enable: you must enter the PIN each time the
phone is switched on.
Change PIN (Menu 6.6.2)
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature
is enabled. You must enter the current PIN before
you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
116
Phone Settings
Phone Lock (Menu 6.6.3)
When the Phone Lock feature is enabled, the phone
is locked and you must enter an 8-digit phone
password each time the phone is switched on.
The password is preset to “00000000” at the
factory. To change the phone password, see the
Change Password menu (Menu 6.6.4).
Once the correct password has been entered, you
can use the phone until you switch it off.
The following options are available:
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you are required to enter the phone
password when you switch the phone on.
Change Password (Menu 6.6.4)
The Change Password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
117
Phone Settings
SIM Lock (Menu 6.6.5)
When the SIM Lock feature is enabled, your phone
only works with the current SIM. You must enter
the SIM lock code to use a different SIM card.
Once you have entered the lock code, you are
asked to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock
code.
Privacy (Menu 6.6.6)
Using this menu, you can lock your media contents,
such as multimedia messages, photos, videos,
voice memos, images and sounds. Once you have
locked the contents, you must enter the phone’s
password to access the associated menus.
To
Press the
select an item to
lock
Up or Down key. To lock all
of the contents, select All
.
place a check mark
Mark soft key.
remove a check
mark
Unmark soft key.
lock the marked
items
OK soft key.
When the phone asks for the password, enter the
password and press the OK soft key.
Note: The password is preset to “00000000” at the
factory. To change this password, see
page 117.
118
Phone Settings
FDN Mode (Menu 6.6.7)
FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The following options are available:
Disable: you can call any number.
Enable: you can only call phone numbers stored in
Phone Book. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu does not display.
Change PIN2 (Menu 6.6.8)
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu does not display.
119
Phone Settings
Extra Settings (Menu 6.7)
You can turn the automatic redialling or answering
features on or off.
To turn a feature Press the
on
off
On soft key.
A check mark displays in
front of the option.
Off soft key.
The check mark no longer
displays.
The following options are available:
Auto Redial: when this option is checked, the
phone makes up to ten attempts to redial a phone
number after an unsuccessful call.
Note: The interval between two attempts varies.
Active Folder: when this option is checked, you
can simply open the folder to answer a call.
When it is unchecked, you must open the folder and
press a key to answer a call, depending on the
setting of the Anykey Answer option. See below.
Anykey Answer: when this option is checked, you
can answer an incoming call by pressing any key,
except the
key and the Reject soft key. To
reject the call, press the
soft key.
key or the Reject
When this option is unchecked, you can only press
the key or Accept soft key.
120
Phone Settings
Short Cut (Menu 6.8)
The Navigation keys can be used as shortcut keys.
In Idle mode, they allow you to access specific
menus directly.
The Left and Right keys are fixed as a shortcut to
the Text Messages menu and the Voice Memo
menu. In this menu, you can change the shortcuts
assigned to the Up and Down keys.
To assign a shortcut to a key:
1. Select the key to be used as a shortcut key by
pressing the Up or Down key and press the
Select soft key.
2. Select the menu to be assigned to the key by
pressing the Up or Down key.
Note: To deactivate a shortcut key, select the
None option.
3. Press the Select soft key to save the selection.
Reset Settings (Menu 6.9)
You can easily reset your phone to its default
settings. To reset your phone:
1. Select the Reset Settings menu.
2. Enter the 8-digit phone password and press the
OK soft key.
Note: The password is preset to “00000000” at the
factory. To change this password, see
page 117.
121
Organiser
The Organiser feature enables you to:
• set an alarm so that the phone rings at a specific
time, such as reminding you of an appointment.
• view the calendar and organise your schedule.
• set the current time and date.
• define a list of things to do.
• record voice memos.
• use the phone as a calculator for basic
mathematical equations or currency exchange
operations.
Alarm (Menu 7.1)
This feature allows you to:
• set the alarm to ring at a specific time.
• set the phone to switch on automatically and ring
the alarm even if the phone is switched off.
The following options are available:
Once Alarm: the alarm rings only once and is then
deactivated.
Daily Alarm: the alarm rings every day at the
same time.
Morning Call: the alarm rings to wake you up in
the morning.
To set an alarm:
1. Choose the type of alarm to be set and press the
Select soft key.
122
Organiser
2. Enter the time for the alarm to sound.
Note: Your phone is preset to use 24-hour format.
To change the format, see page 127.
If you want to use the alarm options, press the
Options soft key. The following options are
available:
•
Remove Alarm: deactivates the current
alarm.
•
Alarm Tone: allows you to select the alarm
melody.
3. Press the OK soft key.
4. If you select Morning Call in step 1, choose the
repeat option, Monday to Friday or Monday
to Saturday, and press the Select soft key.
To stop the alarm when it rings, press one of the
volume keys or press the Exit soft key.
Remove Alarm: deactivates all alarm settings.
Autopower: when this option is set to Enable, the
alarm rings at the specified time, even if the phone
is switched off.
If the menu option is set to Disable and the phone
is switched off at the specified time, the alarm does
not ring.
123
Organiser
Calendar (Menu 7.2)
With the Calendar feature, you can:
• consult the calendar to check your memos.
• write memos to keep track of your schedule.
• set an alarm to act as a reminder.
Consulting the Calendar
When you select the Calendar menu (Menu 7.2),
the calendar displays with today’s date highlighted.
The following options are available when you press
the Options soft key:
Search All: displays all of the memos, starting with
the oldest regardless of the day. To scroll through
the memos, press the Left or Right key.
Delete All: allows you to delete all of the memos.
You are asked to confirm your action.
Go to Date: allows you to go to a specific date.
Exit: exits the Calendar feature and returns to Idle
mode.
Writing a Memo
You can make up to 30 memos for one day.
To write or edit a memo on a specific date:
1. Select a date on the calendar, using the
Navigation keys.
Note: To skip to the previous or next month,
press the Volume keys on the left side of
the phone.
124
Organiser
2. Press the Select soft key.
An empty memo screen displays allowing you to
enter your memo.
3. Enter your memo and then press the OK soft
key.
Note: For further details about how to enter
characters, see page 44.
You are asked if you wish to set an alarm.
4. If you want an alarm to ring on the chosen day,
press the Yes soft key.
Otherwise, press the No soft key. The memo is
saved.
5. If you pressed the Yes soft key, enter the time
for the alarm and press the OK soft key.
Note: Your phone is preset to use 24 hour format.
To change the format, see page 127.
You can also select the melody for the alarm by
pressing the Melody soft key.
The colour of the date on the calendar changes to
green to indicate that a memo exists for that date.
Viewing a Memo
When you select a day for which a memo already
exists on the calendar, the latest memo for that day
displays.
If more than one memo is stored, press the Left or
Right key to scroll to the previous or next memo.
Press the New soft key to add a new memo for the
day.
125
Organiser
You can use the following options by pressing the
Options soft key:
Edit: allows you to change the memo text.
Alarm: allows you to set an alarm to ring at a
specified time to remind you of the memo. If you
set the alarm earlier, you can change or delete it.
Delete: allows you to delete the memo.
Copy to: allows you to copy the memo to another
date.
Move to: allows you to change the date of the
memo.
Time & Date (Menu 7.3)
This menu allows you to change the current time
and date displayed. You can also find out what time
it is in another part of the world.
The following options are available:
Set Time: allows you to enter the current time. You
can choose the time format in the Time Format
menu (Menu 7.3.4).
Note: Before setting the time, you must specify your
time zone in the World Time menu (Menu
7.3.3). See the following page.
Set Date: allows you to enter the day, month and
year.
126
Organiser
World Time: allows you to find out what time it is
in another part of the world, using the Left and
Right keys.
The screen shows the:
• city name.
• current time and date.
• time difference between the selected city and
your city if you have set the local time (see below
for further details).
To select your time zone:
1. Select the city corresponding to your time zone
by pressing the Left or Right key one or more
times.
The local time and date display.
2. Press the Set soft key.
Time Format: allows you to change the time
format to 24 Hours or 12 Hours
.
127
Organiser
Calculator (Menu 7.4)
With this feature, you can use the phone as a
calculator. The calculator provides basic arithmetic
functions; addition, subtraction, multiplication and
division.
1. Enter the first number using the numeric keys.
Notes
• To delete mistakes or clear the display, press the
key.
:
C
• To include a decimal point or a bracket, press the
left soft key until the symbol you want displays.
2. Press the right soft key until the arithmetic
symbol you want appears:
+
(addition),
(division).
-
(subtraction), (multiplication),
/
3. Enter the second number.
4. To view the result, press the
key.
5. Repeat steps 1 to 4 as many times as required.
128
Organiser
To Do List (Menu 7.5)
This feature allows you to:
• enter a list of tasks to be done.
• assign a priority and a deadline to each task.
• sort the tasks by priority and status mark.
Creating the To Do List
1. Press the New soft key.
2. Enter the first task.
Note: For further details about how to enter
characters, see page 44.
3. Press the OK soft key.
4. Select a priority status of high, normal or low
priority using the Up and Down keys and press
the Select soft key.
5. Enter your deadline and press the OK soft key.
If you do not want to set a deadline, press the
Skip soft key.
Editing the To Do List
When you select the To Do List menu (Menu 7.5),
the current contents display with a check mark,
indicating whether tasks have been done, and its
priority level;
for Low.
for High,
for Normal and
129
Organiser
Action
Procedure
View the details for
a specific task
➀
➀
➀
Highlight the task.
Press the View soft key.
Scroll through the tasks
using the Up and Down
keys, if necessary.
Change the status
of a specific task
➀
➀
Highlight the task.
Press the
key to mark
the task as completed as of
the current time and date.
or
➀
➀
➀
➀
Highlight the task.
Press the Options soft key.
Select the Mark option.
Select the appropriate
status (Done or Undo).
Create a new task
➀
➀
➀
Press the Options soft key.
Select the New option.
Enter the text, priority and/
or deadline for the task.
Edit an existing
task
➀
➀
➀
➀
Highlight the task.
Press the Options soft key.
Select the Edit option.
Change the text, priority
and/or deadline for the
task.
Sort the existing
tasks by priority or
status
➀
➀
➀
Press the Options soft key.
Select the Sort option.
Select the sort criterion
(
High
,
Low, Done or
Undo).
130
Organiser
Action
Procedure
Copy a task
➀
➀
➀
➀
Highlight the task.
Press the Options soft key.
Select the Copy option.
Change the text, priority
and/or deadline for the
task.
Copy a task to the
calendar
➀
➀
➀
Highlight the task.
Press the Options soft key.
Select the Copy to
Calendar option.
➀
Change the text and
deadline for the task and
set the alarm.
Delete a task
➀
➀
➀
Highlight the task.
Press the Options soft key.
Select the Delete option.
Delete all tasks
➀
➀
Press the Options soft key.
Select the Delete All
option.
➀
Confirm the deletion by
pressing the OK soft key.
Exit the To Do list
➀
➀
Press the Options soft key.
Select the Exit option.
131
Organiser
Voice Memo (Menu 7.6)
You can record voice memos. After recording, you
can send the memo to other people using the
Multimedia Message Service.
Note: In Idle mode, you can quickly access this menu
by pressing the Right soft key.
Record (Menu 7.6.1)
This menu allows you to record a new memo. When
you select this option, the display shows the 30-
second timer.
Note: In Idle mode, you can quickly access this menu
by pressing and holding the Right soft key.
1. To start recording, press the Record soft key.
2. Record a memo by speaking into the
microphone.
3. When you press the Stop soft key, or if the
recording time expires, the following options
display:
•
•
Replay: plays back your memo.
Re-record: discards the memo and enables
you to record another one.
•
•
Save: allows you to save the memo.
Quit: cancels your recording and exits the
Record menu.
4. To save the memo, choose Save from the
options and press the Select soft key.
132
Organiser
5. Press the
C
key to clear the default name, if
necessary, and enter a name for the memo.
For further details about how to enter
characters, see page 44.
6. Press the OK soft key.
The memo is saved and then the display shows
the memo information.
7. Press the Options soft key to use the following
memo options:
•
Send: allows you to send the memo to other
people by using the MMS feature. Follow the
procedure on page 83.
•
•
Rename: allows you to change the memo’s
name.
Delete: deletes the memo.
8. To exit, press the
C
or
key.
Memo List (Menu 7.6.2)
This menu shows your voice memo list. Scroll to a
memo and press the Options soft key. The
following options are available:
Play: plays the memo.
Send: allows you to send the memo to other people
by using the MMS feature. See page 83 for further
details about sending a message.
Rename: allows you to change the memo’s name.
Properties: displays information about the memo,
such as the name, date when the memo was made,
recording duration and memory size.
Delete: deletes the memo.
133
Organiser
Delete All (Menu 7.6.3)
In this menu, you can delete all of your voice
memos.
When the confirming message appears, press the
Yes soft key. To cancel the deletion, press the No
soft key.
Memory Status (Menu 7.6.4)
You can check the amount of the memory for voice
memos.
The display shows the total, used and free space
including the number of memos you recorded and
the total number of memos you can record.
Currency Exchange (Menu 7.7)
Using this menu, you can figure out currency
conversions.
1. Enter the current exchange rate of your source
currency and press the OK soft key.
You can insert a decimal point by pressing
the
key.
2. Enter the amount to convert and press the OK
soft key.
The amount you entered and its equivalent
value display.
3. Press the Exit soft key to exit the currency
convertor.
134
Network Services
These menu functions are network services. Please
contact your service provider to check their
availability and then subscribe to them, if you wish.
Call Diverting (Menu 8.1)
This network service enables incoming calls to be
rerouted to a number that you specify.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
You can use the following options to divert voice
calls and/or data calls:
Divert Always: all calls are diverted.
Busy: calls are diverted when you are already on
another call.
No Reply: calls are diverted when you do not
answer the phone.
Unreachable: calls are diverted when you are not
in an area covered by your service provider.
Cancel All: all call diverting options are cancelled.
135
Network Services
To set your call diverting options:
1. Select a call diverting option by pressing the Up
or Down key, and then press the Select soft
key.
2. Select the type of calls, voice or data, by
pressing the Up or Down key, and then press the
Select soft key.
The current status displays. If the option has
already been set, the number to which the calls
are diverted displays.
3. To
activate call
Press the
Activate soft key. Go to
diverting
step 4.
change the number Change soft key. Go to
to be called
step 4.
deactivate call
diverting
Remove soft key.
4. Enter the number to which the calls are to be
diverted and press the OK soft key.
To enter an international code, press the
until the sign displays.
0
key
+
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can deactivate all call diverting settings by
selecting the Cancel All option.
136
Network Services
Call Barring (Menu 8.2)
The call barring network service allows you to
restrict your calls.
You can use the following options to restrict voice
calls and/or data calls:
All Outgoing: calls cannot be made.
International: international calls cannot be made.
International Except to Home: when abroad,
calls can be made only to numbers within the
current country and to your home country, which is
the country where your home network provider is
located.
All Incoming: calls cannot be received.
Incoming While Abroad: calls cannot be received
when you are using your phone outside of your
home service area.
Cancel All: all call barring settings are deactivated;
calls can be made and received normally.
To set your call barring options:
1. Select a call barring option by pressing the Up or
Down key, and then press the Select soft key.
2. Select the type of calls, voice or data, by
pressing the Up or Down key, and then press the
Select soft key.
3. Press the Activate soft key to confirm your
settings.
137
Network Services
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
To deactivate specific call barring settings:
1. Select the call barring option to be deactivated.
2. Select the type of calls to which this option
applies.
3. Press the Deactivate soft key.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can also deactivate all call barring settings by
selecting the Cancel All option.
Change Barring Password: you can set and
change the call barring password obtained from
your service provider using this option. You must
enter the current password before you can specify a
new one.
Once you have entered a new password, you are
asked to confirm it by entering it again.
138
Network Services
Call Waiting (Menu 8.3)
This network service informs you when someone is
trying to reach you during another call.
You can specify individual call waiting options for
voice calls and/or data calls.
To set your call waiting options:
1. Select the type of calls, voice or data, to which
you want to apply the call waiting option by
pressing the Up or Down key, and then press the
Select soft key.
The screen informs you whether call waiting is
activated or deactivated.
2. You can activate or deactivate the call waiting
feature as necessary by using the Activate or
Deactivate soft key respectively.
To return to the previous screen, press the Exit
soft key.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
139
Network Services
Network Selection (Menu 8.4)
The Network Selection feature enables you to
automatically or manually select the network used
when roaming outside of your home area.
Note: You can select a network other than your home
network only if there is a valid roaming
agreement between them.
To automatically or manually select the network
when roaming:
1. When Network Selection displays, press the
Select soft key.
2. Press the Up or Down key until the appropriate
option highlights and then press the OK soft
key.
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to step 3.
3. Press the Up or Down key until the network you
want highlights and then press the OK soft key.
You are connected to that network.
140
Network Services
Caller ID (Menu 8.5)
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow the user to change
this setting.
The following options are available:
Default: the default setting provided by the
network is used.
Hide Number: your number does not display on
the other person’s phone.
Send Number: your number is sent each time you
make a call.
Closed User Group (CUG) (Menu 8.6)
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
can create up to ten user groups.
For details about how to create and use a closed
user group, contact your service provider.
Example: A company lends SIM cards to its
employees and wants to restrict outgoing
calls to members of the same team.
Activating a Closed User Group
If you select the Closed User Group menu, you
can enter the CUG function. You can now access the
following options after pressing the Select soft key:
141
Network Services
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears.
Add a new CUG index as advised by your service
provider or delete a group.
To
Press the
scroll through the Up or Down key.
existing CUG
indexes
add a new CUG
index
Options soft key, select the
Add option and enter the
index.
delete a CUG
index
Options soft key and select
the Delete option.
activate a CUG
index
Options soft key and select
the Activate option.
Outside Access: lets you enable or disable calls to
numbers other than those in the Closed User Group.
This feature depends on the nature of your CUG
subscription. Please check with your service
provider.
Default Group: you may set a default CUG with
your service provider. If you have done so, you can
enable the Default Group option on your phone.
When making a call, you are given the option of
using your default CUG, instead of selecting one
from the list.
Deactivate: deactivates the CUG function. This
menu appears only when the default group is
enabled or a CUG index is selected.
142
Network Services
Band Selection (Menu 8.7)
For the phone to make and receive phone calls, it
must register with one of the available networks.
Your phone can handle any of the following types of
networks:
• Combined GSM 900/1800
• GSM 1900
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you must remember to change to an
appropriate band.
1. When Band Selection displays, press the
Select soft key.
2. Press the Up or Down key until the appropriate
option highlights and press the OK soft key.
3. When the display confirms the network band
you selected, press the Yes soft key.
To cancel the selection, press the No soft key.
When you select a new band, your phone displays a
confirmation message and then automatically
searches for all of the available networks. Your
phone registers with a preferred network within the
band.
143
Funbox
The Funbox menu contains several fun options.
WAP Browser (Menu 9.1)
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to access
and navigate the Wireless Web using your phone.
Home (Menu 9.1.1)
Selecting this menu connects the phone to the
network and loads the homepage of the Wireless
Web service provider. You can also press the
in Idle mode.
key
The contents of the WAP Browser startup homepage
depends on your Wireless Web service provider. To
scroll through the screen, use the Up or Down keys.
Note: To access the startup homepage from any other
screen in the WAP browser, use the Home
option. For further details about the WAP
Browser menus, see page 146.
Exiting the WAP Browser
To exit the browser at any time, simply press and
hold the
key.
144
Funbox
Navigating the WAP Browse
r
To
Press the
scroll through and Up or Down key until the
select browser
items
symbol
points to the item,
and then press the Select
soft key to confirm the
selection.
return to the
previous page
Back soft key or the
C
key.
return to the
key for more than 2
startup homepage seconds and select the Home
option. For further details
about this option, see
page 146.
Entering Text in the WAP Browser
When you are prompted to enter text, the current
text input mode is indicated on the screen. To
change the text input mode, press the
or more times.
key one
The following modes are available:
Upper-case character mode
(A): allows you to
enter upper-case English characters.
Lower-case character mode ): allows you to
enter lower-case English characters.
T9 mode T9): allows you to enter English
characters by pressing one key per letter. In this
mode, you can use only the key to display
(a
(
0
alternative words. To change the case, press the
key.
Number mode
(1): allows you to enter numbers.
145
Funbox
Selecting and Using Browser Menu Options
Various menu options are available when you are
using the WAP Browser to navigate the Wireless
Web.
To access a menu option:
1. Press and hold the
A menu list displays.
key.
2. Highlight a menu by pressing the Up or Down
key.
3. Select an option by pressing the Select soft key.
4. If necessary, select a secondary option using the
Up or Down keys, and press the Select soft key
to confirm.
Note: The menus may vary, depending on your
version of the WAP browser.
The following options are available:
Reload: reloads the current page.
Home: takes you back at any time to the home
page of the Wireless Web service provider.
Goto URL: allows you to manually enter the URL
address of a Web page. After entering an address,
press the OK soft key to go there directly.
Show URL: displays the URL address of the Web
page to which you are currently connected. It also
enables you to set the current site as the startup
home page.
146
Funbox
To
Press the
set the current
page as your
Options soft key and select
the Save to Home option.
startup home page
set a bookmark for Option soft key and select
the current page
the Save to Bookmark
option.
cancel your setting Back soft key.
Edit Home: allows you to change the startup home
page manually. Enter the URL and press the OK soft
key. For further details about entering text, see
page 145.
Clear Cache: deletes the information stored in the
cache, which stores the most recently accessed
Web pages.
Inbox: allows you to read messages received from
a web server.
Favorite (Menu 9.1.2)
This menu allows you to store the URL addresses of
up to ten of your favourite web sites. You can
access this menu directly by pressing and holding
the
key while using the WAP browser.
To store a URL address:
1. Select an empty location and press the Select
soft key.
2. Enter the address and press the Enter soft key.
For further details about how to enter
characters, see page 44.
147
Funbox
3. Enter a name for the favourite item and press
the Enter soft key.
After saving favourite items, you can use the
following options by pressing the Select soft key:
Goto URL: quickly takes you to the site.
Edit: allows you to edit the address and name.
Delete: deletes the address.
http:// (Menu 9.1.3)
This menu allows you to manually enter the URL
address of the Web site that you wish to access.
For further details about how to enter characters,
see page 44.
Settings (Menu 9.1.4)
This menu allows you to set up five proxy servers
for the WAP browser. Contact your service provider
for details about your Settings options.
For each server, the following options are available:
Profile Name: enter a name that you wish to
assign to the HTTP server.
Homepage URL: set the address of your startup
homepage. When the default homepage displays,
you can delete it using the
own choice.
C
key and enter your
Security: select a data transmission mode. Choose
Secure to protect your data against unauthorised
access; otherwise, choose Non-Secure
.
148
Funbox
Bearer: select a bearer to be used for each type of
network address accessed; GPRS or Data. The
remaining options depend on the Bearer setting.
When the bearer is set to GPRS
:
IP Address: enter the WAP gateway address
required to connect to the Internet.
User Name: enter the User ID required to connect
to the GPRS network.
Password: enter the password required to connect
to the GPRS network.
APN: enter the access point name used for the
address of the GPRS network gateway.
When the bearer is set to Data
:
IP Address: enter the WAP gateway address
required to connect to the Internet.
Login Name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up Number: enter the PPP server phone
number.
Data Call Type: select a data call type; Analogue
or ISDN
.
Note: The WAP browser settings may vary, depending
on the service provider. Contact your service
provider for further details.
149
Funbox
Clear Cache (Menu 9.1.5)
You can clear the information stored in the cache,
the phone’s temporary memory which stores the
most recently accessed Web pages.
Press the Yes soft key to confirm the deletion.
Otherwise, press the No soft key.
Push Message (Menu 9.1.6)
In this menu, you can receive and access web
messages from the server.
The following options are available:
Inbox: allows you to read the messages received
from a web server.
Receive: allows you to set whether or not your
phone receives web messages.
Delete All: allows you to delete all of the web
messages.
150
Funbox
Games & More (Menu 9.2)
You can download MIDlets (Java applications
running on mobile phones) from various sources
using the WAP Browser and store them in your
phone.
When you access the Games & More menu, the list
of the default games appears. Once you have
downloaded games, they are added to the list.
Note: Java services may not be available, depending
upon your service provider.
Launching a MIDlet
Note: The procedure explained below is for the
default games. For downloaded games, the
procedure may be different.
1. Scroll to the MIDlet you want on the Games list
and press the Launch soft key.
2. On the startup screen of the MIDlet, scroll to an
option using the Navigation keys.
The following options are available:
•
•
START GAME: starts a new game.
CONTINUE: allows you to continue the last
game you played.
•
HIGH SCORE: shows the high score table.
This option may not be available for some
games.
•
•
HOW TO PLAY: shows how to play the game
and the key functions for the game.
OPTION: allows you to switch the game
sound on or off.
151
Funbox
3. Press the
key to confirm your selection.
While you are playing a
game, to
Press the
adjust the sound volume
Volume keys.
stop the game and return
to the startup screen
C
key.
exit the game
key.
Viewing MIDlet Information
1. Scroll to the MIDlet you want and press the Info
soft key.
The display shows information about the MIDlet,
such as the file size, application version and its
vendor.
2. To scroll to other MIDlet information, press the
Navigation keys.
3. If you want to delete the MIDlet, press the
Delete soft key and then press the Yes soft key
to confirm the deletion.
Note: When you select the default games from
the list, the Delete option is not available,
so that you cannot delete them.
4. To exit and return to the Games list, press the
Back soft key or the
C
key.
152
Funbox
Entering Text
If you need to enter text while using a MIDlet, you
can use the following input modes:
Upper-case character mode
(A): allows you to
enter upper-case English characters.
Lower-case character ): allows you to enter
lower-case English characters.
Number mode ): allows you to enter numbers.
(a
(1
Symbol mode: allows you to enter symbols. After
highlighting a symbol by pressing the Navigation
keys, press the
T9 mode T9): allows you to enter English
characters by pressing one key per letter. In this
key to insert it.
(
mode, you can change the case by pressing the
key.
0
To change the text input mode, press the
until the appropriate indicator appears on the soft
key area of the display.
key
Changing the DNS Settings
The DNS (Domain Name Server) is the server that
assigns the Java server domain name to an IP
address. The DNS setting is preset at the factory,
but sometimes you may need to change it at your
service provider’s instructions.
1. Scroll to Setting on the Games list and press
the Select soft key.
2. Enter the primary address using the number
keypad and press the OK soft key.
3. Enter the secondary address and press the OK
soft key.
153
Funbox
Sounds (Menu 9.3)
In this menu, you can view the list of sounds
downloaded from a web server or received in
multimedia messages. You can set the downloaded
sounds as the current ring tone or send them to
other phones.
By pressing the Options soft key, you can use the
following options:
Rename: allows you to change the name of the
sound.
Delete: deletes the sound.
Set as Ring Tone: sets the sound as your ring
tone.
Images (Menu 9.4)
In this menu, you can view the list of photos
downloaded from a web server or received in
messages. You can set the downloaded photos as
the current background image or send them to
other phones.
If you set a photo as your wallpaper, it displays as
My Photo on the list.
By pressing the Options soft key, you can use the
following options:
Rename: allows you to change the name of the
image.
Delete: deletes the image.
Set as Wallpaper: sets the image as your
wallpaper for the idle screen.
154
Funbox
Delete All (Menu 9.5)
This menu allows you to delete all of the
downloaded items in the Games, Sounds and
Images folders. You can delete all of the items at
one time.
To
Press the
select a folder to
clear
Up or Down key. To delete
all of your items, select
All
.
place a check mark
Mark soft key.
remove a check
mark
Unmark soft key.
delete the marked
items
Delete soft key.
When a confirming message displays, press the Yes
soft key to confirm.
Memory Status (Menu 9.6)
You can check the amount of the memory being
used and the memory remaining for games or
sounds and images.
Games: the display shows the total, used and free
space and the number of games you downloaded.
Sounds & Images: the display shows the total,
used and free space, including each space used for
sounds and images.
155
Solving Problems
If you are experiencing problems with your phone,
perform the following simple checks, before
contacting a service professional. This may save
you the time and expense of an unnecessary
service call.
When you switch your phone on, the
following messages may appear:
Insert SIM Card
• Check that the SIM card is correctly installed.
Phone Locked Enter Password
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
(PIN) supplied with the SIM card.
• The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN Check menu
(Menu 6.6.1).
Enter PUK
• The PIN code was entered incorrectly three times
in succession and the phone is now blocked.
Enter the PUK supplied by your service provider.
156
Solving Problems
“No service,” “Network failure” or “Not
done” displays
• The network connection was lost. You may be in a
weak signal area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was
not dialled
• Have you pressed the
key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Your correspondent cannot reach you
• Is your phone switched on (the
for more than one second)?
key pressed
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Your correspondent cannot hear you
speaking
• Have you switched off the microphone?
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
157
Solving Problems
The phone starts beeping and
“**Warning** Low Battery” flashes on
the display
• Your battery is insufficiently charged. Recharge
the battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
); the number of bars indicates the signal
strength from strong ( ) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
No number is dialled when you recall a
Phone Book entry
• Check that the number has been stored correctly,
by using the Phone Book Search feature.
• Re-store the number, if necessary.
If the above guidelines do not help you to solve
the problem, take note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung after-
sales service.
158
Access Codes
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorised use.
When requested for any of the codes explained
below, enter the appropriate code (displayed as
asterisks) and press the OK soft key. If you make a
mistake, press the
C
key one or more times until
the incorrect digit is cleared and then continue
entering the correct code.
The access codes, except for the PUK and PUK2
codes, can be changed using the Security menu
(Menu 6.6). See page 116 for further details.
Important! Avoid using access codes resembling
emergency numbers, such as 112, so
that you do not accidentally dial an
emergency number.
Phone Password
The Phone Lock feature uses the phone password to
protect your phone against unauthorised use. The
phone password is supplied with the phone and is
preset to “00000000” at the factory.
To
See
activate/deactivate the page 117 (Menu 6.6.3).
Phone Lock feature
change the phone
password
page 117 (Menu 6.6.4).
159
Access Codes
PIN
The
Personal
Identification
Number or PIN (4 to
8 digits) protects your SIM card against
unauthorised use. It is usually supplied with the
SIM card.
If you enter an incorrect PIN three times in
succession, the code is disabled and cannot be used
until you re-enable it by entering the PUK (see
below).
To
See
activate/deactivate the page 116 (Menu 6.6.1).
PIN Check feature
change the PIN
page 116 (Menu 6.6.2).
PUK
The 8-digit PUK (
PIN
Unblocking
Key) is required to
change a disabled PIN. The PUK may be supplied
with the SIM card. If not, or if you have lost it,
contact your service provider.
To re-enable your PIN:
1. Enter the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the OK
soft key.
3. When the Confirm New PIN message displays,
enter the same code again and press the OK
soft key.
If you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid. Contact
your service provider for a new card.
160
Access Codes
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions, such
as setting the maximum cost of a call. These
functions are available if supported by your SIM
card.
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, see page 119 (Menu 6.6.8).
PUK2
The 8-digit PUK2 (
PIN
Unblocking
Key
2), supplied
with some SIM cards, is required to change a
disabled PIN2. If you lose the code, contact your
service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the
OK soft key.
3. When the Confirm PIN2 message displays,
enter the same code again and press the OK
soft key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your service
provider for a new card.
161
Access Codes
Barring Password
A 4-digit barring password is required when you use
the Call Barring function. You can obtain the
password from your service provider when you
subscribe to this function.
You can change this password in the Call Barring
menu (Menu 8.2). See page 138 for further
details.
162
Health and Safety
Information
SAR Certification Information
This phone meets European Union (EU)
requirements concerning exposure to radio waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured so as not
to exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
The exposure standard for mobile phones employs
a unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by
the EU Council is 2.0W/kg.*
The highest SAR value for this model phone was
0.981 w/kg.
* The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of body
tissue. The limit incorporates a substantial margin of safety to
give additional protection for the public and to account for any
variations in measurements. The SAR values may vary,
depending on national reporting requirements and the
network band.
163
Health and Safety Information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
network. In general, the closer you are to a base
station, the lower the power output of the phone.
Precautions When Using Batteries
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge, the type of battery and the
charger used. The battery can be charged and
discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and
standby time) is noticeably shorter than normal,
it is time to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
164
Health and Safety Information
approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
165
Health and Safety Information
Road Safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, make sure that you are
following the special regulations in a given area or
country.
Operating Environment
Remember to follow any special regulations in force
in any area and always switch your phone off
whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
166
Health and Safety Information
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
• Should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that interference
is taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
167
Health and Safety Information
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch your phone off
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted
notices require you to do so.
168
Health and Safety Information
Potentially Explosive Environments
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
the areas below decks on boats, chemical transfer
or storage facilities, vehicles using liquefied
petroleum gas, such as propane or butane, areas
where the air contains chemicals or particles, such
as grain, dust or metal powders, and any other area
where you would normally be advised to turn off
your vehicle engine.
169
Health and Safety Information
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary
by location.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
170
Health and Safety Information
Other Important Safety Information
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone equipment
in your vehicle is mounted and operating
properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Switch your phone off before boarding an aircraft.
The use of wireless phones in an aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
171
Health and Safety Information
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that corrode electronic
circuits.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
172
Health and Safety Information
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
173
Glossary
To help you understand the main technical terms
and abbreviations used in this booklet, and to take
full advantage of the features of your mobile phone,
here are a few definitions:
Active Folder
Ability to answer a call simply by opening the
phone.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call Waiting
Informs you that you have an incoming call when
you are engaged on another call.
Caller Line Identification Services (Caller ID)
Services allowing subscribers to view or block the
telephone numbers of callers.
174
Glossary
EMS (Enhanced Message Service)
An adaptation of the Short Message Service (SMS)
that allows you to send and receive ring tones and
the service provider’s logo, as well as combinations
of simple media to and from EMS-compliant
handsets. Because EMS is based on SMS, it can use
SMS centres the same way that SMS does. EMS
works on all Global System for Mobile
communications (GSM) networks. EMS senders can
use text, melodies, photos, sounds, and animations
to enhance the expressive power of messages that
are limited by the display constraints of mobile
devices.
GPRS (General Packet Radio Service)
New non-voice value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS provides continuous
connection to the Internet for mobile phone and
computer users. It is based on the Global System
for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message
Service (SMS).
GSM (Global System for Mobile
Communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
175
Glossary
Java
Programming language generating applications that
can run on all hardware platforms, whether small,
medium or large, without modification. It has been
promoted for and geared heavily to the Web, both
for public Web sites and Intranets. When a Java
program runs from a Web page, it is called a Java
applet. When it is run on a mobile phone or pager, it
is called a MIDlet.
MMS (Multimedia Message Service)
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd
Generation Partnership Program (3GPP). For phone
users, MMS is similar to Short Message Service
(SMS)-it provides automatic, immediate delivery of
user-created content from phone to phone. The
message addressing used is primarily phone
numbers, thus the traffic goes from phone to
phone. MMS also provides support for e-mail
addressing, so that messages can be sent by e-
mail. In addition to the text content of SMS, MMS
messages can contain still images, voice or audio
clips, and also video clips and presentation
information.
Multi-party Calling
Ability to establish a conference call involving up to
five additional parties.
Phone Password
Security code used to unlock the phone when you
have selected the option to lock it automatically
each time it switches on.
176
Glossary
PIN (Personal Identification Number)
Security code that protects the phone against
unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
Proxy SeMrver
A proxy server resides between a Web client, such
as a web browser, and a real Web server and acts
as an intermediary between them. When some
people browse a web site, their browser is not
actually connecting to the web server. The request
from their browser goes to a proxy server, and the
proxy server makes the request to the web server.
A proxy server can improve performance for groups
of users because it caches the results of all requests
for a certain amount of time. If a user requests a
web page that it already loaded for another user, it
reloads the page instead of forwarding the request
to the Web server, which can be a time-consuming
operation.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
177
Glossary
SDN (Service Dialling Numbers)
Telephone numbers supplied by your network
provider and giving access to special services, such
as voice mail, directory inquiries, customer support
and emergency services.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited or
sent.
Soft Keys
Two keys marke
d
and
on the phone, the
purpose of which:
• varies according to the function that you are
currently using.
• is indicated on the bottom line of the display just
above the corresponding key.
178
Glossary
Tri Band
Ability to handle any of the following types of
network; GSM 900, GSM 1800, combined GSM 900/
1800 and GSM 1900 MHz bands, for greater call
success and wider roaming.
Your phone automatically searches for the last
network used. If, for any reason, this network is
unavailable, your phone will attempt to register
with a different network.
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
179
Index
Caller groups
editing • 38
searching • 37
Caller ID • 141
Calls
A
Access codes • 159
Active folder • 120
Alarm • 122
Alert type • 107
Alphabet mode, text input •
48
answering • 26
barring • 137
diverting • 135
ending • 24
holding • 50
making • 23
redialling • 24
rejecting • 26
Answering
call • 26
second call • 55
Anykey answer • 120
Auto redial • 120
waiting • 55
Camera
options • 99
,
139
B
Background image • 112
Backlight
description • 15
time, set • 113
Band selection • 143
Barring, calls • 137
Battery
playing videos • 104
recording videos • 103
taking photos • 97
viewing photo • 102
CB(CellBroadcast)messages
•
76
Characters, enter • 44
Charging battery • 20
Closed User Group (CUG) •
141
charging • 20
installing • 19
low indicator • 21
precautions • 164
removing • 18
Conference call • 55
Connect tone • 110
Cost, calls • 96
Broadcast messages • 76
Browser, WAP • 144
Currency exchange • 134
C
D
Calculator • 128
Calendar memos
copying • 126
deleting • 126
viewing • 125
writing • 124
Date, set • 126
Deleting
calendar memo • 126
call record • 92
multimedia message •
80, 82
Call back, message • 67
Call costs • 96
Call records
phonebook • 35
photo • 102
task • 131
dialled • 93
text message • 67
,
68
missed • 27 92
,
video • 104
received • 93
Call time • 95
voice memo • 133
Delivery reports, message •
73
180
Index
Dialled calls • 93
Display
I
Icons, description • 14
Images, downloaded • 154
Inbox, messages
backlight • 15
external • 16
icons • 14
multimedia • 78
text • 66
layout • 13
settings • 112
Diverting, calls • 135
DNS settings • 153
DTMF tones, send • 53
Infrared, connect • 111
International calls • 23
Internet • 144
J
E
Java service • 151
Earpiece volume • 25
Emergency calls • 170
EMS (Enhanced Message
Service) • 66
K
Error tone • 110
Key volume • 25
Keypad tones
selecting • 107
sending • 53
Keys
External display • 16
F
description • 11
location • 10
FDN (Fixed Dial Number)
mode • 119
Folder tone • 109
Forwarding, multimedia
message • 80
Front LCD • 16
Funbox • 144
L
Language, select • 115
Last number, redial • 24
Locking
media contents • 118
phone • 117
SIM card • 118
G
Games • 151
Graphic logo • 114
Greeting message • 114
Low battery indicator • 21
M
H
Memory status
camera • 105
downloaded items •
155
Health and safety • 163
Holding, call • 50
multimedia messages
• 88
phonebook • 42
text messages • 74
181
Index
Menus
P
accessing • 58
Password
list • 60
Message tone • 108
Messages
call barring • 138
phone • 117 159
Phone
,
162
,
cell broadcast • 76
care and maintenance
• 172
greeting • 114
multimedia • 78
text • 66
voice • 75
web • 150
display • 13
icons • 14
keys • 11
layout • 10
MIDlets, launch • 151
Minute minder • 110
Missed calls • 27 92
MMS (Multimedia Message
Service) • 78
Morning call • 122
locking • 117
password • 159
resetting • 121
switching on/off • 22
unpacking • 9
,
Phonebook
Multimedia messages
creating/sending • 83
copying • 36
deleting • 35
editing • 35
options • 35
,
41
deleting • 80
editing • 82
reading • 78
setting • 84
,
82
,
81
searching/dialling • 36
speed-dialling • 39
storing • 32
Multi-party calls • 55
Muting
Photos
all sounds • 29
key tones • 53
microphone • 52
deleting • 102
taking • 97
viewing • 102
PIN
N
Names
changing • 116
description • 160
PIN2
entering • 44
changing • 119
description • 161
searching/dialling • 36
Network band, select • 143
Network selection • 140
Network services • 135
Numbers, phone
Power on/off tone • 109
Privacy • 118
Problems, solve • 156
PUK • 160
searching/dialling • 36
storing • 32
PUK2 • 161
R
O
Received calls • 93
Received messages
multimedia • 78
text • 66
On/off switch, phone • 22
Organiser • 122
Outbox, messages
multimedia • 81
text • 68
Recording
videos • 103
voice memos • 132
Own number • 115
182
Index
Redialling
automatically • 120
Templates
multimedia • 87
manually • 24
Resetting phone • 121
Ring tone • 106
text • 72
Text input mode • 45
Text message
Ring type • 107
creating/sending • 69
Ring volume • 106
Road safety • 166
Roaming • 140
deleting • 67
,
68
68
reading • 66
,
setting • 72
Text, enter • 44
Time format • 127
Time, set • 126
To do list • 129
Tone
S
Safety
information • 163
precautions • 7
Scheduler • 124
SDN (Service Dialling
Numbers) • 43
Searching, phonebook • 36
Security, calls • 116
Sent messages
connect • 110
error • 110
folder • 109
keypad • 107
message • 108
minute minder • 110
power on/off • 109
ring • 106
multimedia • 81
text • 68
Travel adapter • 20
Service light • 16
Silent mode • 29
SIM card
,
113
U
installing • 18
locking • 118
User group • 141
SMS
V
Using • 54
SMS (Short Message Service)
Inbox • 66
Outbox • 68
Soft keys • 30
Sound settings • 106
Sounds, downloaded • 154
Speed-dial • 39
Switching on/off
microphone • 52
phone • 22
Vibration • 107
Video
deleting • 104
playing • 104
recording • 103
Voice mail • 75
Voice memo
deleting • 133
playing • 133
recording • 132
Voicemail server • 75
Volume, adjust
earpiece • 25
keypad tone • 25
ring • 106
T
T9 mode, text input • 46
Tasks, to do list
creating • 129
editing • 129
183
Index
W
Waiting call • 139
Wallpaper • 112
WAP browser
access • 144
cache, clear • 150
favourite • 147
World time • 127
Writing messages
multimedia • 83
text • 69
184
186
|
