Samsung A640 User Manual

Sprint PCS Vision® Phone A640 by Samsung®

www.sprint.com

and other trademarks are trademarks of Sprint Nextel.

Printed in Korea.

Table of Contents

Welcome to Sprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii

Your Phone’s Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii

Section 1: Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1A. Setting Up Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Getting Started With Sprint PCS Service . . . . . . . . . . . . . . . . . . . . . .4

Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Sprint PCS Account Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Section 2: Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2A. Your Phone: The Basics . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Front View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Viewing the Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Turning Your Phone On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Using Your Phone’s Battery and Charger . . . . . . . . . . . . . . . . . . . . 24

Navigating Through Phone Menus . . . . . . . . . . . . . . . . . . . . . . . . . 28

Displaying Your Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Making and Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

2B. Controlling Your Phone’s Settings . . . . . . . . . . . . . . . . 47

Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Location Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Airplane Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

TTY Use With Sprint PCS Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Updating Phone Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Phone Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Call Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

2C. Setting Your Phone’s Security . . . . . . . . . . . . . . . . . . . . 69

Accessing the Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Using Your Phone’s Lock Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Lock Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Using Special Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Erasing Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Erasing My Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Erasing Voice Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Erasing Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Erasing Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Resetting Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Security Features for Sprint PCS Vision . . . . . . . . . . . . . . . . . . . . . . 77

2D. Controlling Your Roaming Experience . . . . . . . . . . . . . 79

Understanding Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Setting Your Phone’s Roam Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Using Call Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Data Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

2E. Managing Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Viewing History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Call History Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Making a Call From Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Saving a Phone Number From Call History . . . . . . . . . . . . . . . . . . 88

Prepending a Phone Number From Call History . . . . . . . . . . . . . 89

Erasing Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

2F. Using Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Finding Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Contacts Entry Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Adding a Phone Number to a Contacts Entry . . . . . . . . . . . . . . . . 96

Editing a Contacts Entry’s Phone Number . . . . . . . . . . . . . . . . . . . 96

Assigning Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Selecting a Ringer Type for an Entry . . . . . . . . . . . . . . . . . . . . . . . . . 98

Wireless Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Dialing Sprint PCS Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

2G. Using the Phone’s Scheduler and Tools . . . . . . . . . . . 103

Using Your Phone’s Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Using Your Phone’s Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Using Your Phone’s Memo Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Using Your Phone’s Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

2H. Using Your Phone’s Voice Services . . . . . . . . . . . . . . . 113

Activating Voice Recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Using Voice Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Using Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Voice Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

Phone Status Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

My Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

2I. Using the Built-in Camera . . . . . . . . . . . . . . . . . . . . . . 125

Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126

Storing Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Sending Sprint PCS Picture Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Managing Sprint PCS Picture Mail . . . . . . . . . . . . . . . . . . . . . . . . . 136

Order Prints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Settings and Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

2J. Using Sprint PCS Ready Link . . . . . . . . . . . . . . . . . . . . . 143

Getting Started With Sprint PCS Ready Link . . . . . . . . . . . . . . . . 144

Making and Receiving a Sprint PCS Ready Link Call . . . . . . . . . 146

Adding and Editing Ready Link Contacts . . . . . . . . . . . . . . . . . . . 154

Erasing Ready Link List Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161

Updating Sprint PCS Ready Link Lists . . . . . . . . . . . . . . . . . . . . . . . 162

Managing Sprint PCS Ready Link Settings . . . . . . . . . . . . . . . . . . 163

2K. Using Bluetooth® Wireless Technology . . . . . . . . . . . 167

Turning Bluetooth On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168

Using the Bluetooth Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . 169

Bluetooth Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

Pairing Bluetooth Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172

Section 3: Sprint PCS Service Features . . . . . . . . . . . . .175

3A. Sprint PCS Service Features: The Basics . . . . . . . . . . . 177

Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178

Using SMS Text Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186

Using SMS Voice Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189

Using Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191

Responding to Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192

Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192

Using Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193

3B. Sprint PCS Vision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195

Sprint PCS Vision Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196

Getting Started With Sprint PCS Vision . . . . . . . . . . . . . . . . . . . . 196

Accessing Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203

Downloading Premium Services Content . . . . . . . . . . . . . . . . . . 206

Exploring the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210

Sprint PCS Vision FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215

3C. Sprint PCS Voice Command . . . . . . . . . . . . . . . . . . . . . 217

Getting Started With Sprint PCS Voice Command . . . . . . . . . . 218

Creating Your Own Address Book . . . . . . . . . . . . . . . . . . . . . . . . . . 219

Making a Call With Sprint PCS Voice Command . . . . . . . . . . . . 220

Accessing Information Using Sprint PCS Voice Command . . 221

Section 4: Safety and Warranty Information . . . . . . .223

4A. Important Safety Information . . . . . . . . . . . . . . . . . . . 225

General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226

Maintaining Safe Use of and Access to Your Phone . . . . . . . . . 227

Using Your Phone With a Hearing Aid Device . . . . . . . . . . . . . . 229

Caring for the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231

Radiofrequency (RF) Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232

Owner’s Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233

Phone Guide Proprietary Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . 234

4B. Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . . . . . . 235

Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241

Welcome to Sprint

Sprint is committed to bringing you the best wireless

technology available. We built our complete, nationwide

network from the ground up, so all your services – whether

it’s Voicemail, Caller ID, email, or Sprint PCS® Picture Mail –

will work the same wherever you go on the Nationwide

Sprint PCS® Network.

This guide will familiarize you with our technology and your

new phone through simple, easy-to-follow instructions. It’s

all right here – from setting up your account passwords and

voicemail to using the most advanced features of your phone.

Welcome and thank you for choosing Sprint.

Introduction

This Phone Guide introduces you to Sprint PCS Service and all

the features of your new phone. It’s divided into four

sections:

ࡗ

Section 1: Getting Started

Section 2: Your Phone

Section 3: Sprint PCS Service Features

Section 4: Safety and Warranty Information

Throughout this guide, you'll find tips that highlight special

shortcuts and timely reminders to help you make the most of

your new phone and service. The Table of Contents and Index

will also help you quickly locate specific information.

You'll get the most out of your phone if you read each section.

However, if you'd like to get right to a specific feature, simply

locate that section in the Table of Contents and go directly to

that page. Follow the instructions in that section, and you'll

be ready to use your phone in no time.

Due to updates in phone software, this printed guide

may not be the most current version for your phone.

Visit www.sprint.com and sign on to My PCS to access

the most recent version of the phone guide.

Phone

Guide

Note:

Please refer to the Important Safety Information section

on page 225 to learn about information that will help

you safely use your phone. Failure to read and follow the

Important Safety Information in this phone guide may

result in serious bodily injury, death, or property

damage.

WARNING

Your Phone’s Menu

The following list outlines your phone’s menu structure. For

more information about navigating through the menus,

please see “Navigating Through Phone Menus” on page 28.

CONTACTS (RIGHT SOFTKEY)

PRESS MENU TO DISPLAY THE FOLLOWING:

VOICE KIT

1: Voice Service

1: Digit Dialing

4: Sound

2: Sensitivity

5: Voice Launch

3: Choice Lists

6: About

2: Voice Memo

1: Record

2: Review

MESSAGING

1: Send Message

1: Text Message

4: VoiceSMS

2: Picture Mail

2: Outbox

3: Handwr. Msg

3: Drafts

2: Text Message

1: Inbox

4: Send Text

3: Picture Mail

1: Inbox

2: Send Picture

3: Send Handwr. Msg

4: VoiceSMS

5: IM & Email

1: PCS Mail

4: Yahoo!

2: AOL

5: Earthlink

3: MSN

6: Other

iii

6: Voicemail

1: Call Voicemail

2: Clear Envelope

7: Chat & Dating

8: Settings

1: Notification

1: Message and Icon

2: Icon only

2: Sending Options

1: Priority (Normal/Urgent)

3: Preset Messages

2: Call Back #

1: Can’t talk right now. Send me a message.

2: Call me

3: Where are you?

6: Let’s get lunch.

8: I’ll be there at

10: I love you!

13: [Empty]

4: Can you pick up

7: The meeting has been cancelled.

9: What time does it start?

11: [Empty]

14: [Empty]

17: [Empty]

20: [Empty]

5: Meet me at

12: [Empty]

15: [Empty]

18: [Empty]

16: [Empty]

19: [Empty]

4: Edit Signature (On/Off)

5: Message Alerts

1: Alert Volume

1: Voicemail

2: Alert Type

1: Voicemail

3: Reminder

1: Off

2: Text Message

2: Once

3: Picture Mail

3: Every 2 min

6: Save in Outbox (Yes/No)

7: Auto Erase (Yes/No)

8: VoiceSMS Options

1: Speakerphone (On/Off)

2: From Name

TOOLS

1: Bluetooth

2: Today

3: Scheduler

4: Task List

5: Countdown

6: Memo Pad

7: World Time

1: Options (DST Setting)

8: Alarm Clock

1: Alarm #1

2: Alarm #2

3: Alarm #3

9: Calculator

0: Set Time (displayed when there is no time information)

PICTURES

1: Camera

Press the right softkey while in camera mode to view the following

options:

1: Self Timer

1: Off

2: 5 Sec

3: 10 Sec

2: Fun Tools

1: Fun Frames

1: Off

2: Love Letter

3: Merry Christmas

4: Movie Star

7: Memories

10: Love

5: Top Secret

8: Robinhood

11: Stars

6: Dollar

9: Roses for Love

12: Beans

2: Color Tones

1: Auto

4: Warm

2: Sepia

5: Cool

3: Mono

3: Controls

1: Brightness

2: White Balance

1: Auto

4: Tungsten

2: Sunny

5: Fluorescent

3: Cloudy

6: Manual

4: Settings

1: Resolution

1: High: 640x480

2: Quality

2: Med: 320x240

2: Normal

3: Low: 224x168

3: Economy

3: Off

1: Fine

3: Shutter Sound

1: Shutter 1-6

2: Say Cheese

4: Auto Erase (On/Off)

5: View Mode (Full Screen/Wide Screen)

5: Review Pictures

2: My Pictures

1: In Camera

3: Online Albums

1: View Albums

2: Saved to Phone

2: Upload Picture

4: Order Prints

5: Settings and Info

1: Account Info

2: View Mode (Full Screen/Wide Screen)

CALL HISTORY

1: Outgoing Calls

2: Incoming Calls

3: Missed Calls

4: Recent Calls

WEB

SETTINGS

1: Display

1: Screen Saver

1: Preset Image

1: Red Flower

4: Pattern

7: Video

2: Reflection

5: Skyscraper

8: Launch Pad

11: Dual Clock

3: Sandglass

6: Sprint

9: World Time

12: Analog Clock

10: Calendar

2: My Content

3: My Albums

2: Menu Style

1: Grid style 1

3: Incoming Call

1: With Caller ID

2: Grid style 2

3: List style

1: Preset Animation

2: My Content

3: My Albums

2: No Caller ID

1: Preset Animation

2: My Content

3: My Albums

4: Dialing Font

1: Color

1: Basic

2: Rainbow

3: Monochrome

4: Hyphenate

2: Size

1: Large

2: Medium

3: Small

5: Greeting (Sprint/Custom)

6: Backlight

1: Main Display

1: Flip open

4: 8 seconds

2: 30 seconds

3: 15 seconds

2: Keypad

vii

1: Flip open

4: 8 seconds

2: 30 seconds

5: Off

3: 15 seconds

3: Pwr Save Mode (On/Off)

4: Brightness

1: Lowest

4: High

2: Low

5: Highest

3: Med

2: Sounds

1: Ringer Type

1: Voice Calls

1: With Caller ID

1: Single Tones

4: My Contents

2: Ring Tones

3: Melodies

2: No Caller ID

1: Single Tones

4: My Contents

2: Ring Tones

2: Ready Link

1: Default

2: Sound 1-6

3: Messages

1: Voicemail

4: Schedule

2: Text Message

2: Ring Tones

3: Picture Mail

3: Melodies

1: Single Tones

4: My Contents

5: Roam Ringer (Normal/Distinctive)

2: Volume

1: Ringer

1: Ringer Off

2: 1-Beep

3: Level 1 - 8

4: Always Vibrate

2: Speakerphone (Level 1-8)

3: Text Message

1: Use Ringer Vol.

2: Separate Vol.

3: Always Vibrate

viii

4: Picture Mail

1: Use Ringer Vol.

5: Voicemail

2: Separate Vol.

3: Always Vibrate

1: Use Ringer Vol.

6: Alarms

1: Use Ringer Vol.

7: App. Volume

1: Volume

1: Use Ringer Vol.

2: Game Vibrate (On/Off)

8: Ready Link

1: Use Ringer Vol.

2: Separate Vol.

3: Always Vibrate

3: Alerts

1: Minute Beep (On/Off)

2: Service (On/Off)

3: Connect (On/Off)

4: Sig. Fade Tone (On/Off) 5: Power On/Off (On/Off)

4: Key Tone

1: Tone Type

1: DTMF

2: Xylophone

2: Level 1 - 8

3: Simple

2: Tone Level

1: Keytone off

3: Tone Length (Short/Long)

5: TTS

1: TTS Mode (Enable/Disable)

2: TTS Volume (Silence All/Level 1-8)

3: Bluetooth

1: Enable (On/Off)

2: Visibility

1: Always visible

3: Device name

2: Visible for 3min

3: Hidden

4: Device Info

4: PCS Vision

1: Enable Vision

5: Ready Link

2: Net Guard (On/Off)

3: Update Profile

1: Enable/Disable (Enable/Disable)

2: Restart Ready Link (Yes/No)

3: List Update

4: R-Link Guard (On/Off)

5: Sounds

1: Tones (Default/Sound 1-6) 2: Notifications (Off/Once/Repeat)

3: Missed Call Alert (Off/Once/Repeat/Continuous)

6: Speakerphone (On/Off)

7: Default View (Personal List/Personal Groups)

8: Help

4: Help

6: Wireless Backup

1: Subscribe

2: Alert (On/Off)

3: Learn More

7: Voice Service

1: Digit Dialing

1: Adapt Digits

2: Sensitivity

1: Commands

2: Reset Digits

2: Names

3: Choice LIsts

1: Name Dialing

4: Sound

2: Digit Dialing

2: Digits

3: Contacts

3: Names

1: Prompts

4: Name Settings

5: Voice Launch

1:Talk Key

2: Talk Key and Flip Open

6: About

8: Security

1: Lock Phone

1: Unlocked

2: On power-up

3: Lock now

2: Lock Service

1: Voice (Lock/Unlock) 2: PCS Vision (Lock/Unlock)

3: Camera (Lock/Unlock) 4: Ready Link (Lock/Unlock)

3: Change Lock

4: Special #

1: Empty

2: Empty

3: Empty

5: Erase

1: Erase Contacts (Yes/No)

3: Erase Voice Memo (Yes/No)

5: Erase Messages (Yes/No)

2: Erase My Contents (Yes/No)

4: Erase Pictures (Yes/No)

6: Default Settings (Yes/No)

7: Reset Phone (Yes/No)

8: Reset Picture Account (Yes/No)

9: Roaming

1: Set Mode

1: Automatic

2: Call Guard (On/Off)

3: Data Roaming (On/Off)

0: Launch Pad

2: Roaming only

3: Sprint

1: Up Key

1: Contacts

2: Messaging

3: Text Inbox

4: VoiceSMS Inbox

7: My Content

10: Voice Memo

13: Calculator

16: Missed Alerts

5: Send Message

8: Web

11: Scheduler

14: Display

6: Send VoiceSMS

9: Voice Service

12: Alarms

15: Ringer Type

2: Down Key

1: Contacts

2: Messaging

5: Send Message

8: Web

11: Scheduler

14: Display

3: Text Inbox

4: VoiceSMS Inbox

7: My Content

10: Voice Memo

13: Calculator

16: Missed Alerts

6: Send VoiceSMS

9: Voice Service

12: Alarms

15: Ringer Type

3: Left Key

1: Contacts

2: Messaging

5: Send Message

8: Web

11: Scheduler

14: Display

3: Text Inbox

4: VoiceSMS Inbox

7: My Content

10: Voice Memo

13: Calculator

16: Missed Alerts

6: Send VoiceSMS

9: Voice Service

12: Alarms

15: Ringer Type

4: Right Key

1: Contacts

2: Messaging

5: Send Message

8: Web

11: Scheduler

14: Display

3: Text Inbox

4: VoiceSMS Inbox

7: My Content

10: Voice Memo

13: Calculator

16: Missed Alerts

6: Send VoiceSMS

9: Voice Service

12: Alarms

15: Ringer Type

*: Others

1: Call Setup

1: Abbrev. Dial (On/Off)

2: Contact Match (On/Off)

3: Restriction

1: Outgoing Call (Allow all / Contacts only / Special# only)

4: Call Answer

1: Any key

2: Talk key

3: Flip open

5: Auto Answer (CarKit/Headset) (Yes/No)

2: Language

1: English

2: Español

3: Airplane Mode (On/Off)

4: Location (On/Off)

xii

5: Key Guard (On/Off)

6: Audio Routing

1: Normal

2: Headset Only

2: Ready Link

2: TTY + Hear

7: Headset Mode

1: Voice Call

3: Button Off

3: TTY + Talk

8: TTY Mode

1: TTY off

4: TTY Full

9: Update Phone SW

#: Phone Info

1: Phone Number

3: Version

2: Icon Glossary

4: Advanced

MY CONTENT

1: Games

1: Get New Games

3: Midnight Pool

5: Tetris Demo

2: My Content Manager Games

4: Ms. PAC-MAN DEMO

6: World Poker Tour Demo

7: ZUMA Demo

2: Ringers

1: Get New Ringers

3: Ringers Preview

2: My Content Manager Ringers

3: Screen Savers

1: Get New Screen Saver

3: Screen Saver Preview

2: My Content Manager Screen Saver

4: Applications

1: Get New Applications

3: eBay Trial

2: My Content Manager Applications

4: ToneMaker

5: Weatherbug Free Trial

6: Instant Msg.

5: Messaging

1: Get New Messaging

2: My Content Manager Messaging

CONTACTS

1: Find

xiii

2: Add New Entry

3: Speed Dial #s

4: Group

1:Unassigned

3: Friends

5: VIPs

2: Family

4: Colleague

6: Empty

5: My Name Card

6: Wireless Backup

1: Subscribe

2: Alert (On/Off)

3: Learn More

7: Services

1: Account Info

2: Customer Service

3: Dir Assist

4: Sprint Operator

5: Sprint Voice Command

IN USE MENU

Press Options (right softkey) to display the following options:

1: Key Mute

4: 3-Way Call

7: Tools

2: Call History

5: Messaging

8: Phone Info

3: Contacts

6: Voice Memo

xiv

Section 1

Getting Started

Section 1A

Setting Up Service

In This Section

ࡗ

Getting Started With Sprint PCS Service

Setting Up Y o ur Voicemail

Sprint PCS Account Passwords

Getting Help

Setting up service on your new phone is quick and easy. This

section walks you through the necessary steps to unlock your

phone, set up your voicemail, establish passwords, and

contact Sprint for assistance with your Sprint PCS Service.

Section 1A: Setting Up Serv ice

Getting Started With Sprint PCS Service

Determining if Your Phone is Already Activated

If you purchased your phone at a Sprint Store, it is probably

activated, unlocked, and ready to use. If you received your

phone in the mail, it probably has been activated; all you

need to do is unlock it.

If your phone is not activated, please refer to the activation

card included with your phone.

Unlocking Your Phone

To unlock your phone, follow these easy steps:

1. Press

to turn the phone on.

2. Press Unlock (

To select a softkey, press the softkey button directly below the

softkey text that appears at the bottom left and bottom right

of your phone’s display screen. Softkey actions change

according to the screen you’re viewing and will not appear if

there is no corresponding action available.

Note:

3. Enter your four-digit lock code. (For security purposes,

the code is not visible as you type.)

If you can’t recall your lock code, try using the last four digits

of either your Social Security number or wireless phone

number or try 0000 or NATL (6285). If none of these work, call

Sprint Customer Service at 1-888-211-4PCS (4727).

Tip:

Section 1A: Setting Up Serv ice

Setting Up Your Voicemail

All unanswered calls to your phone are automatically

transferred to your voicemail, even if your phone is in use or

turned off. Therefore, you will want to set up your voicemail

and personal greeting as soon as your phone is activated.

To set up your voicemail:

1. From standby mode, press and hold

2. Follow the system prompts to:

Ⅲ

Create your passcode

Record your name announcement

Record your greeting

Choose whether or not to activate One-Touch

Message Access (a feature that lets you access

messages simply by pressing and holding

bypassing the need for you to enter your passcode)

Voicemail Passcode

Note:

If you are concerned about unauthorized access to your

voicemail account, Sprint recommends you enable your

voicemail passcode.

For more information about using your voicemail, see “Using

Voicemail” on page 178.

Section 1A: Setting Up Serv ice

Sprint PCS Account Passwords

As a Sprint PCS customer, you enjoy unlimited access to your

personal account information, your voicemail account, and

your Sprint PCS Vision® account. To ensure that no one else

has access to your information, you will need to create

passwords to protect your privacy.

Account Password

If you are the account owner, you'll have an account password

to sign on to www.sprint.com and to use when calling Sprint

Customer Service. Your default account password is the last

four digits of your Social Security number. If you are not the

account owner (if someone else receives the invoice for your

Sprint PCS Service), you can get a sub-account password at

www.sprint.com.

Voicemail Password

You'll create your voicemail password (or passcode) when you

set up your voicemail. See “Setting Up Your Voicemail” on

page 178 for more information on your voicemail password.

Sprint PCS Vision Password

With your A640 by Samsung, you may elect to set up a

Sprint PCS Vision password. This optional password may be

used to authorize purchase of Premium Services content and

to protect personal information on multi-phone accounts.

For more information, or to change your passwords, sign on

to www.sprint.com or call Sprint Customer Service at

1-888-211-4PCS (4727).

Section 1A: Setting Up Serv ice

Getting Help

Visit www.sprint.com

You can go online to:

ⅷ

Access your account information

ⅷ

Check your minutes used (depending on your

Sprint PCS service plan)

ⅷ

View and pay your bill

Make your life easier by enrolling in Sprint PCS online

billing and automatic payment

ⅷ

Purchase accessories

Shop for the latest phones

View available Sprint PCS service plans and options

Learn more about Sprint PCS Vision and other great

products like Sprint PCS Picture Mail, games, ringers,

screen savers, and more

Reaching Sprint Customer Service

You can reach Sprint Customer Service many different ways:

ⅷ

Dial

on your wireless phone.

ⅷ

Sign on to your account at www.sprint.com.

Call us toll-free at 1-888-211-4727 (Consumer customers)

or 1-888-788-4727 (Business customers).

ⅷ

Write to us at Sprint Customer Service, P.O. Box 8077,

London, KY 40742.

Section 1A: Setting Up Serv ice

Receiving Automated Invoicing Information

For your convenience, your phone gives you access to

invoicing information on your Sprint PCS account. This

information includes balance due, payment received,

invoicing cycle, and an estimate of the number of minutes

used since your last invoicing cycle.

To access automated invoicing information:

ᮣ

Press

This service may not be available in all Affiliate areas.

Note:

Sprint 411

You have access to a variety of services and information

through Sprint 411, including residential, business, and

government listings; movie listings or showtimes; driving

directions, restaurant reservations, and major local event

information. You can get up to three pieces of information

per call, and the operator can automatically connect your call

at no additional charge.

There is a per-call charge to use Sprint 411 and you will be

billed for airtime.

To call Sprint 411:

ᮣ

Press

Section 1A: Setting Up Serv ice

Sprint Operator Services

Sprint PCS Operator Services provides assistance when

placing collect calls or when placing calls billed to a local

telephone calling card or third party.

To access Sprint Operator Services:

ᮣ

Press

For more information or to see the latest in products and

services, visit us online at www.sprint.com.

Section 1A: Setting Up Serv ice

Section 2

Your Phone

Section 2A

Your Phone: The Basics

In This Section

ࡗ

Front View of Your Phone

Viewing the Display Screen

Features of Your Phone

Turning Your Phone On and Off

Using Your Phone’s Battery and Charger

Navigating Through Phone Menus

Displaying Your Phone Number

Making and Answering Calls

Entering Text

Your phone is packed with features that simplify your life and

expand your ability to stay connected to the people and

information that are important to you. This section will guide

you through the basic functions and calling features of your

phone.

Section 2A: Yo ur Phone: The Basics

Front View of Your Phone

1. Speaker

2. Display Screen

22. Navigation Key

3. Ready Link Key

4. Headset Jack

5. Left Softkey

21. Right Softkey

20. Menu/OK Key

19. END/POWER Key

18. Speakerphone/

Voice Signal Key

6. TALK Key

7. Volume Key

17. BACK/CLEAR Key

16. Camera Key

8. Voicemail Key

9. Numeric Keypad

10. Shift/Asterisk Key

15. Space/Pound Key

14. Plus Code

Dialing Key

13. Microphone

12. Power Interface

Connector

11. Standard Interface/

Accessory Connector

Section 2A: Your P hone: The Basics

Key Functions

1. Speaker allows you to hear the other caller and the

different ring tones or sounds offered by your phone.

2. Display Screen displays all the information needed to

operate your phone, such as the call status, the

contacts, the date and time, and the signal and battery

strength.

3. Ready Link Key press to activate Ready Link mode.

4. Headset Jack allows you to plug in an optional headset

for convenient, hands-free conversations.

5. Left Softkey allows you to select softkey actions or menu

items corresponding to the bottom left line on the

display screen.

6. Talk Key allows you to place or receive calls, answer Call

Waiting, use Three-Way Calling, or activate Voice Dial.

7. Volume Key allows you to adjust the ringer volume in

standby mode (with the flip open) or adjust the voice

volume during a call. The volume key can also be used to

scroll up or down to navigate through the different

menu options. To mute the ringer during an incoming

call, press the volume key up or down.

8. Voicemail Key allows you to press and hold to

automatically dial your voicemail.

9. Numeric Keypad allows you to enter numbers, letters,

and characters.

10. Shift/Asterisk Key enters the asterisk [*] character for

calling features. In text entry mode, press to change the

capitalization mode.

11. Standard Interface/Accessory Connector allows you to

connect optional charging accessories and accessory

cables to your phone.

Section 2A: Yo ur Phone: The Basics

12. Power Interface Connector allows you to plug in the travel

charger that was included with your phone.

13. Microphone allows other callers to hear you clearly

when you are speaking to them.

14. Plus Code Dialing Key automatically dials the

international access code for the country in which you

are located (for instance, 011 for international calls

placed from the United States).

15. Space/Pound Key enters the pound [#] character for

calling features. In text entry mode, press to enter a

space.

16. Camera Key allows you to capture a picture when you

are in camera mode.

17. Back/Clear Key deletes characters from the display in

text entry mode. When in a menu, press the Back key to

return to the previous menu. This key also allows you to

return to the previous screen in a Sprint PCS Vision

session.

18. Speakerphone/Voice Signal Key in stand-by mode, press

and hold to launch voice signal. Press once to display

the recent call log. If the flip is closed, press and hold

with the Ready Link key to disable/enable the key guard.

While on a call, press to turn speakerphone on or off.

19. End Key/Power ends a call. Press and hold this key for

two seconds to turn your phone on or off. While in the

main menu, it returns the phone to standby mode and

cancels your input. When you receive an incoming call,

press to enter silent mode and mute the ringer.

20. Menu/OK allows you to access the menu screen. It also

allows you to accept choices when navigating through a

menu.

Section 2A: Your P hone: The Basics

21. Right Softkey allows you to select softkey actions or

menu items corresponding to the bottom right line on

the display screen.

22. Navigation Key scrolls through the phone’s menu

options and acts as a shortcut key from standby mode.

Ⅲ

Press Up to access Missed Alerts.

Press Down to access My Content.

Press Right to access the Web.

Press Left to access Send Message.

(Keys can be reassigned to create customized

shortcuts.)

Viewing the Display Screen

Your phone’s display screen provides a wealth of information

about your phone’s status and options. This list identifies the

symbols you’ll see on your phone’s display screen:

To view a list of your phone’s icons and descriptions, from the

main menu select Settings > Phone Info > Icon Glossary.

Tip:

indicates that your Sprint PCS Vision connection

is active.

indicates that you are sending information.

indicates that you are receiving information.

indicates that your Sprint PCS Vision connection

is dormant or inactive.

indicates Ready Link is being used.

indicates Ready Link is disabled.

indicates Ready Link/Speaker On is enabled.

Section 2A: Yo ur Phone: The Basics

indicates that position location is active.

indicates that position location is inactive.

indicates that your phone is in Web security

mode.

indicates that your phone is roaming.

indicates that you have voicemail, text, numeric

pages, or Wireless Application Protocol (WAP)

messages waiting. Press

briefly to see a list of

pending messages or press and hold to dial your

voicemail box.

indicates that there is an unread message in

your inbox.

indicates that the text message has been read.

indicates that there is an unread urgent message in

your inbox.

indicates that you have read the urgent message.

indicates that there is an unread URL message.

indicates that you have read the URL message.

indicates that there is an unread urgent URL

message.

indicates that you have read the urgent URL

message.

indicates that the message was sent.

indicates that the message failed to be sent.

indicates that you have a pending message.

Section 2A: Your P hone: The Basics

indicates that the message is a draft.

indicates that there is an unread Text VoiceSMS

message in your inbox.

indicates that the Text VoiceSMS message has been

read.

indicates that there is a new SMS Voice message in

your inbox.

indicates that you have listened to the SMS Voice

message.

indicates that your message is locked.

indicates that your phone is in vibrate all mode.

indicates that the TTY option is on.

indicates that your phone has a ringer volume set

and the vibrate option is checked.

indicates that the ringer is set at a level

between 1 - 8 or that 1-Beep is selected.

indicates that your ringer is turned off and the

vibrate option is checked.

indicates that your phone’s ringer is turned off and

the vibrate option is not checked.

indicates that an alarm is set on your phone.

tells you a call is in progress.

means your phone cannot find a signal.

displays your current signal strength. The more

lines you have, the stronger your signal.

Section 2A: Yo ur Phone: The Basics

shows your current battery charge strength. (Icon

shows fully charged in idle mode.)

shows your current battery charge strength. (Icon

shows fully discharged in idle mode.)

indicates that the camera is enabled.

indicates that the self-timer function is enabled.

With the self-timer enabled, a set amount of time

is required prior to taking a picture.

indicates that the brightness has been set

manually.

indicates that the white balance setting

automatically adjusts for the conditions.

indicates that the white balance has been set to

Sunny. This is used for taking pictures outdoors on

bright sunny days.

indicates that the white balance has been set to

Cloudy. This is used for taking pictures outdoors

under cloudy conditions.

indicates that the white balance has been set to

Tungsten. This is used for taking pictures indoors

under normal lighting conditions.

indicates that the white balance has been set to

Fluorescent. This is used for taking pictures indoors

under fluorescent lighting conditions.

indicates that the white balance has been set to

Manual. This is used for taking pictures indoors.

Section 2A: Your P hone: The Basics

indicates that a picture has been assigned a

function. An example may be Picture ID, Screen

Saver, or Incoming Call.

indicates that a picture has been saved to your

phone.

indicates that a picture has been uploaded to an

online album or folder.

indicates that a picture has been downloaded to

from an online album or folder.

indicates that Bluetooth technology is connected.

indicates that Bluetooth technology is enabled.

Display indicators help you manage your roaming charges by

letting you know when you’re off the Nationwide Sprint PCS

Network. (For more information, see Section 2D: Controlling

Your Roaming Experience, on page 79.)

Note:

Features of Your Phone

Congratulations on the purchase of your phone. The A640 by

Samsung is lightweight, easy-to-use, and reliable, and it also

offers many significant features and service options. The

following list previews some of those features and provides

page numbers where you can find out more:

ⅷ

Dual band/tri-mode capability allows you to make and

receive calls while on the Nationwide Sprint PCS Network

and to roam on other analog and 1900 and 800 MHz

digital networks where Sprint has implemented roaming

agreements (page 79).

Section 2A: Yo ur Phone: The Basics

ⅷ

Sprint PCS Ready Link® provides instant walkie-talkie–

style communication between two or more Ready Link

users (up to six on a group call) (page 143).

ⅷ

Sprint PCS Vision provides access to the wireless Internet

in digital mode (page 195).

Sprint PCS® Mail (page 204), SMS Text Messaging (page

186), and SMS Voice Messaging (page 189) provide quick

and convenient messaging capabilities.

ⅷ

Sprint PCS® Voice Command lets you dial phone numbers

by speaking someone’s name or the digits of that person’s

phone number (page 217).

Games, ringers, screen savers, and other applications can

be downloaded to make your phone as unique as you are

(page 206). Additional charges may apply.

ⅷ

The Contacts list allows you to store up to 299 entries,

with up to five phone numbers per entry (page 91).

The built-in Scheduler offers several personal information

management features to help you manage your busy

lifestyle (page 103).

ⅷ

Your phone is equipped with a Location feature for use in

connection with location-based services that may be

available in the future (page 57).

Your phone’s external LCD display allows you to monitor

the phone’s status and to see who’s calling without

opening the phone.

ⅷ

T9 Text Input lets you quickly type messages with one

keypress per letter (page 43).

Speed dial lets you dial phone numbers with one or two

keypresses (page 41).

Section 2A: Your P hone: The Basics

Turning Your Phone On and Off

Turning Your Phone On

To turn your phone on:

ᮣ

Press and release

Once your phone is on, it may display “Looking for Service,”

which indicates that your phone is searching for a signal.

When your phone finds a signal, it automatically enters

standby mode – the phone’s idle state. At this point, you are

ready to begin making and receiving calls.

If your phone is unable to find a signal after 15 minutes of

searching, a Power Save feature is automatically activated.

When a signal is found, your phone automatically returns to

standby mode.

In Power Save mode, your phone searches for a signal

periodically without your intervention. You can also initiate a

search for Sprint PCS Service by pressing any key (when your

phone is turned on).

The Power Save feature helps to conserve your battery power

when you are in an area where there is no signal.

Note:

Turning Your Phone Off

To turn your phone off:

ᮣ

Press and hold

for two seconds until you see the

powering-down animation on the display screen.

Your screen remains blank while your phone is off (unless the

battery is charging).

Section 2A: Yo ur Phone: The Basics

Using Your Phone’s Battery and Charger

Use only Sprint-approved or manufacturer-approved

batteries and chargers with your phone. The failure to use

a Sprint-approved or manufacturer-approved battery and

charger may increase the risk that your phone will

overheat, catch fire, or explode, resulting in serious bodily

injury, death, or property damage.

Warning!

Sprint- or manufacturer-approved batteries and accessories

can be found at Sprint Stores or through your phone’s

manufacturer, or call 1-866-343-1114 to order. They’re also

available at www.sprint.com – click the Wireless link under

“Personal,” and then click Accessories under “Shop Sprint PCS

Online.”

Section 2A: Your P hone: The Basics

Battery Capacity

Your phone is equipped with a Lithium Ion (Li-Ion) battery. It

allows you to recharge your battery before it is fully drained.

The battery provides up to 3.8 hours of continuous digital talk

time.

When the battery reaches 5% of its capacity, the battery icon

blinks. When there are approximately two minutes of talk

time left, the phone sounds an audible alert and then powers

down.

Long backlight settings, searching for service, vibrate mode,

and browser use affect the battery’s talk and standby times.

Note:

Tip:

Be sure to watch your phone’s battery level indicator and

charge the battery before it runs out of power.

Installing the Battery

To install the Li-Ion battery:

1. Insert the battery into the opening on the back of the

phone at a 45-degree angle, making sure to line up the

gold contacts. Gently press down until it snaps into

place.

2. Install the protective cover by lining up the tabs at a

and gently press up until the cover snaps into place.

Section 2A: Yo ur Phone: The Basics

Removing the Battery

To remove your battery:

1. Remove the protective cover by pressing down on the

back of the cover and sliding it towards the back of the

handset.

2. Grip the battery at the bottom and pull up and out at a

45-degree angle.

Charging the Battery

Your phone’s Li-Ion battery is rechargeable and should be

charged as soon as possible so you can begin using your

phone.

Keeping track of your battery’s charge is important. If your

battery level becomes too low, your phone automatically

turns off and you will lose all the information you were just

working on. For a quick check of your phone’s battery level,

glance at the battery charge indicator located in the upper-

right corner of your phone’s display screen. If the battery

charge is getting too low, the battery icon (

the phone sounds a warning tone.

) blinks and

Always use a Sprint-approved desktop charger, travel charger,

or vehicle power adapter to charge your battery.

Using the wrong battery charger could cause damage

to your phone and void the warranty.

Warning:

Section 2A: Your P hone: The Basics

Using the Travel Charger

To use the travel charger provided with your phone:

ᮣ

Plug the round end of the AC adapter into the phone’s

power interface connector and the other end into an

electrical outlet.

Ⅲ

A charging icon located in the top right corner of the

outside LCD lets you know the battery is charging.

Ⅲ

An onscreen indicator lets you know that the battery

is charged.

It takes about three hours to fully recharge a completely

rundown battery.

UL Certified Travel Adapter

The Travel Adapter for this phone has met UL 1310 safety

requirements. Please adhere to the following safety

instructions per UL guidelines.

FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY

LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE

PROPERTY DAMAGE

IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE

INSTRUCTIONS.

DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

CAREFULLY FOLLOW THESE INSTRUCTIONS. FOR CONNECTION

TO A SUPPLY NOT IN THE U.S.A., USE AN ATTACHMENT PLUG

ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER

OUTLET.

Section 2A: Yo ur Phone: The Basics

Navigating Through Phone Menus

The navigation key on your phone allows you to scroll

through menus quickly and easily. The scroll bar at the right

of the menu keeps track of your position in the menu at all

times.

To navigate through a menu, simply press the navigation key

up or down. If you are in a first-level menu, such as Settings,

you may also navigate to the next or previous first-level menu

by pressing the navigation key right or left.

For a diagram of your phone’s menu, please see “Your Phone’s

Menu” on page iii.

Selecting Menu Items

As you navigate through the menu, menu options are

highlighted. Select any numbered option by simply pressing

the corresponding number on the phone’s keypad. You may

also select any item by highlighting it and pressing

For example, if you want to view your last incoming call:

1. Select Menu ( ) to access the main menu.

2. Select Call History by pressing

and pressing

3. Select Incoming Calls by pressing

it and pressing

or by highlighting it

or by highlighting

. (If you have received any calls, they

are displayed on the screen.)

For the purposes of this guide, the above steps condense into

“Select Menu > Call History > Incoming Calls.”

Note:

Section 2A: Your P hone: The Basics

Backing Up Within a Menu

To go to the previous menu:

ᮣ

Press

To return to standby mode:

Press

ᮣ

Displaying Your Phone Number

Just in case you forget your phone number, your phone can

remind you.

To display your phone number:

ᮣ

Select Menu > Settings > Phone Info > Phone Number.

(Your phone number and other information about your

phone and account will be displayed.)

To select Menu, press the menu key. To select menu options

(such as Settings, above), highlight the option and press OK.

(If the menu options are numbered, you may also select an

option simply by pressing the corresponding number key.)

Note:

Section 2A: Yo ur Phone: The Basics

Making and Answering Calls

Holding Your Phone

Since the antenna has been integrated into the design of the

phone, it is important not to block the reception path

accidentally to ensure the strongest signal possible is

achieved. The orbital internal antenna is located near the

hinge of your handset.

ATTENTION

Incorrect

Correct

Obstructing the internal

antenna could inhibit

call performance.

Section 2A: Your P hone: The Basics

Making Calls

Placing a call from your phone is as easy as making a call from

any landline phone. Just enter the number, press

you’re on your way to clear calls.

, and

To make a call using your keypad:

1. Make sure your phone is on.

2. Enter a phone number from standby mode. (If you make

a mistake while dialing, press

a time. Press and hold

to erase one digit at

to erase the entire number.)

3. Press

Call Guard is enabled, press

“Using Call Guard” on page 82.)

4. Press or close the phone when you are finished.

. (To make a call when you are roaming and

and then . See

To redial your previous call, press TALK twice.

Tip:

You can also place calls from your phone by using the

Contacts menu (page 93), Sprint PCS Voice Command

(page 217), speed dialing numbers from your

Contacts (page 40), using Voice Dial (page 115), and using

your Call History listings (page 88).

Section 2A: Yo ur Phone: The Basics

Dialing Options

When you enter numbers in standby mode, select

Options (

) to see the following dialing options.

To initiate an option, press the corresponding softkey button.

ⅷ

4-Digit Dial dials the four digits displayed onscreen.

Dial dials the number or digits displayed.

Send Msg allows you to send text messages, picture

messages, SMS Voice messages, or handwritten

messages, with attachments to the number being dialed.

ⅷ

Save allows you to enter a seven- or ten-digit number

(phone number and area code) and press Options (right

softkey) > Save to save the phone number in your

Contacts. (See “Saving a Phone Number” on page 37.)

Find allows you to enter a digit or string of digits, press

Options (right softkey), and then press Search to display

Contacts entries that contain the entered numbers. (See

“Finding a Phone Number” on page 38.)

ⅷ

Hard Pause allows you to enter a hard pause. To continue

dialing, you must press a key. (See “Dialing and Saving

Phone Numbers With Pauses” on page 39.)

2sec Pause allows you to enter a two-second pause. The

phone will pause and then continue dialing without any

additional keys being pressed. (See “Dialing and Saving

Phone Numbers With Pauses” on page 39.)

Section 2A: Your P hone: The Basics

Answering Calls

To answer an incoming call:

1. Make sure your phone is on. (If your phone is off,

incoming calls go to voicemail.)

2. Press

to answer an incoming call. (Depending on

your phone’s settings, you may also answer incoming

calls by opening the phone or by pressing any number

key. See “Call Answer Mode” on page 66 for more

information.)

Your phone notifies you of incoming calls in the following

ways:

ⅷ

The phone rings and/or vibrates.

The backlight illuminates.

The screen displays an incoming call message.

If the incoming call is from a number stored in your Contacts,

the entry’s name is displayed. The caller’s phone number may

also be displayed, if available.

If Call Answer is set to Talk Key, the following options are also

displayed. To select an option, press the corresponding

softkey button.

ⅷ

Answer to answer the call.

ⅷ

Ignore to send the call to your voicemail box.

To quiet the ringer, press the back, end, or volume key.

Tip:

Section 2A: Yo ur Phone: The Basics

Answering a Roam Call With Call Guard Enabled

Call Guard is an option that helps you manage your roaming

charges when making or receiving calls while outside the

Nationwide Sprint PCS Network. Please see Section 2D:

Controlling Your Roaming Experience for more information

about roaming.

To answer a call when you are roaming and Call Guard is enabled:

ᮣ

Select Answer to answer the call. (See “Using Call

Guard” on page 82 for additional information.)

When your phone is off, incoming calls go directly to

voicemail.

Note:

Ending a Call

To disconnect a call when you are finished:

ᮣ

Close the phone or press

Missed Call Notification

When an incoming call is not answered, the Missed Call log is

displayed on your screen.

To display the Missed Call entry from the notification screen:

ᮣ

Highlight the entry and press

number, press .)

. (To dial the phone

To display a Missed Call entry from standby mode:

1. Select Menu > Call History > Missed Calls.

2. Highlight the entry you wish to view and press

Section 2A: Your P hone: The Basics

Calling Emergency Numbers

You can place calls to 911 (dial

and press

even if your phone is locked or your account is restricted.

When you place an emergency call, your phone automatically

enters Emergency mode.

Note:

During an emergency call, press Options (right softkey) to

display your options. To select an option, highlight it and

press

ⅷ

Unlock Phone to unlock your phone (appears only if the

phone is locked).

To close the pop-up menu (appears only if the phone is

unlocked), press the

key.

Press Options (right softkey) and then Phone Info & Phone

Number to display your phone number during an emergency

call.

Tip:

To exit Emergency mode:

1. Press

to end a 911 call.

2. Press

until Emergency mode is exited.

Section 2A: Yo ur Phone: The Basics

In-Call Options

Pressing Options (right softkey) during a call displays a list of

features you may use during the course of a call. To select an

option, press the corresponding keypad number or highlight

the option and press

. The following options are available

through the Options menu:

Due to higher volume levels, do not place the phone

near your ear during monitor use.

Warning!

ⅷ

Key Mute/Unmute allows you to mute the microphone on

your handset so the caller is unable to hear any sound.

Call History checks your call log for Outgoing, Incoming,

Missed, and Recent calls. You can also erase the logs from

this menu.

ⅷ

Contacts accesses the Contacts menu.

3-Way Call allows you to talk to two different people at the

same time. (For more information, see “Making a Three-

Way Call” on page 192.)

ⅷ

Messaging accesses the Messaging menu options.

Voice Memo allows you to record incoming audio from

your conversation. (For more information, see “Voice

Memos” on page 120.)

ⅷ

Tools accesses the Tools menu options.

Phone Info displays the following menu options:

Ⅲ

Phone Number

Icon Glossary

Version

Advanced

During a call, the left softkey button functions as the Mute

button. Press it to mute the phone’s microphone for privacy.

Press it again to Unmute the phone.

Section 2A: Your P hone: The Basics

End-of-Call Options

After receiving a call from or making a call to a phone number

that is not in your Contacts, the phone number and the

duration of the call are displayed. The right softkey displays

the Next > Save option. Select this option if you wish to add

the new number to your Contacts. (See “Saving a Phone

Number” below.)

After receiving a call from or making a call to a phone number

that is already in your Contacts, the entry name and phone

number and the duration of the call are displayed. Highlight

the desired entry and press the Right Softkey to display the

option Next > Call Again.

The End-of-Call options are not displayed for calls identified

as No ID or Restricted.

Note:

Saving a Phone Number

Your phone can store up to five phone numbers in each

Contacts entry for up to a total of 299 phone numbers. Each

entry’s name can contain up to 20 characters. Your phone

automatically sorts the Contacts entries alphabetically. (For

more information, see Section 2F: Using Contacts on page

91.)

To save a number from standby mode:

1. Enter a phone number and press

2. Select New Entry or Existing Entry and press

The New Entry screen does not display for the first entry saved

in the Contacts. Skip to step 3 if you are entering the first

number in the Contacts.

Note:

Section 2A: Yo ur Phone: The Basics

If Existing Entry was selected, press OK to launch the Find

screen. Locate the desired contact and add the additional

number to the selected entry.

Note:

3. Use your navigation key to select a label (Mobile, Home,

Work, Pager, or Others) and press

4. Enter a name for the entry using the numeric keys. After

pressing a key for the first letter, press to select the

desired entry method T9(English), Alpha, Symbol, or

Number. (See “Entering Text” on page 42.)

5. When you have finished entering the name, press

return to the Contacts entry.

6. Press

for Done to save the entry.

Finding a Phone Number

You can search Contacts entries for phone numbers that

contain a specific string of numbers.

To find a phone number:

1. While in standby mode, enter three or more of the last

digits of the phone number. (The more numbers you

enter, the more specific the search becomes.)

2. Press Options (

) and select Find. (All Contacts entries

matching the entered numbers will be displayed.)

3. To display the Contacts entry that contains the phone

number you entered, highlight the entry and press

To dial the number, press

Section 2A: Your P hone: The Basics

Dialing and Saving Phone Numbers With Pauses

You can dial or save phone numbers with pauses for use with

automated systems, such as voicemail or credit card billing

numbers.

There are two types of pauses available on your phone:

ⅷ

Hard Pause sends the next set of numbers when you press

the left softkey button.

ⅷ

2-sec Pause automatically sends the next set of numbers

after two seconds.

You can have multiple pauses in a phone number and

combine two-second and hard pauses.

Note:

To dial or save phone numbers with pauses:

1. Enter the phone number.

2. Press Options (

) and select either Hard Pause or 2sec

Pause.

3. Enter additional numbers.

4. Press

– or –

Press Options (

) > Save to save the number in your

Contacts.

When dialing a number with a hard pause, press Talk to send

the next set of numbers.

Note

Section 2A: Yo ur Phone: The Basics

Plus (+) Code Dialing

When placing international calls, you can use Plus Code

Dialing to automatically enter the international access code

for your location (for example, 011 for international calls

placed from the United States).

To make a call using Plus Code Dialing:

1. Press and hold

until a “+” appears on your phone

display.

2. Dial the country code and phone number you’re calling

and press . (The access code for international dialing

will automatically be dialed, followed by the country

code and phone number.)

Dialing From the Contacts List

To dial directly from a Contacts entry:

1. Select Menu > Contacts > Find.

Press Contacts (right softkey) to list entries.

Shortcut:

2. Highlight the entry you want to call and press

– or –

To dial another number from the entry, highlight the

name and press

call, and press

, highlight the number you wish to

Section 2A: Your P hone: The Basics

Using Speed Dialing

You can store up to 98 numbers in your phone’s speed dial

memory to make contacting friends and family as easy as

pressing a button or two. With this feature, you can dial

speed dial entries using one keypress for locations 2-9 or two

keypresses for locations 10-99.

To use One-Touch Dialing for speed dial locations 2-9:

ᮣ

Press and hold the appropriate key for approximately

two seconds. The display confirms that the number has

been dialed when it shows the name and number of the

speed dial.

To use Two-Touch Dialing for speed dial locations 10-99:

1. Press the first digit.

2. Press and hold the second digit for approximately two

seconds. The display confirms that the number has been

dialed when it shows the name and number of the

speed dial.

Speed dialing is not available when you are roaming; when

you are roaming off the Nationwide Sprint PCS Network, you

must always dial using 11 digits (1 + area code + number).

Note:

Section 2A: Yo ur Phone: The Basics

Entering Text

Selecting a Character Input Mode

Your phone provides convenient ways to enter words, letters,

punctuation, and numbers whenever you are prompted to

enter text (for example, when adding a Contacts entry or

when using Sprint PCS Mail and SMS Text Messaging).

To change the character input mode:

1. When you display a screen where you can enter text,

press the right softkey to change the character input

mode.

2. Select one of the following options:

Ⅲ

T9(English) to enter text using a predictive text

entering system that reduces the number of keys

that need to be pressed while entering a word

(see page 43).

Ⅲ

Alpha to cycle through the alpha characters

associated with the letters on the keypad

(see page 44).

Ⅲ

Symbol to enter symbols (see page 45).

Number to enter numbers by pressing the numbers

on the keypad (see page 45).

Ⅲ

Preset Msg to enter preprogrammed messages (see

page 45).

Recent Msg to enter a message from a list of

previous messages.

Emoticons to enter “emoticons” (see page 45).

When entering text, press the * (Shift) key to change letter

capitalization (Abc > ABC > abc).

Tip:

Section 2A: Your P hone: The Basics

Entering Characters Using T9 Text Input

T9 Text Input lets you enter text in your phone by pressing

keys just once per letter. (To select the T9 Word mode when

entering text, see “Selecting a Character Input Mode” on

page 42.)

T9 Text Input analyzes the letters you enter using an intuitive

word database and creates a suitable word. (The word may

change as you type.)

To enter a word using T9(English) Text Input:

1. Select the T9(English) character input mode. (See

“Selecting a Character Input Mode” on page 42.)

2. Press the corresponding keys once per letter to enter a

word. (For example, to enter the word “Bill,” press

.) (If you make a mistake, press

to erase a single character. Press and hold

delete an entire entry.)

If the word you want is not displayed after you have entered

all the letters, press to scroll through additional word

selections. To accept a word and insert a space, press

Section 2A: Yo ur Phone: The Basics

Entering Characters by Tapping the Keypad

To enter characters by tapping the keypad:

1. Select the Alpha mode. (See “Selecting a Character Input

Mode” on page 42.)

2. Press the corresponding keys repeatedly until the

desired letter appears. (For example, to enter the word

“Bill,” press

times, and

mistake, press

and hold

twice,

three times,

three

three times again.) (If you make a

to erase a single character. Press

^{to delete an entire entry}.)

By default, the first letter of an entry is capitalized and the

following letters are lowercased. After a character is entered,

the cursor automatically advances to the next space after two

seconds or when you enter a character on a different key.

Characters scroll in the following order:

. ,@ 1 ?! * # /

A B C 2

T U V 8

W X Y Z 9

D E F 3

G H I 4

Space

Shift

J K L 5

M N O 6

P Q R S 7

Entering Numbers, Symbols, Smileys, and Preset

Messages

To enter numbers:

ᮣ

Select the Number mode and press the appropriate key.

(See “Selecting a Character Input Mode” on page 42.)

To enter symbols:

Select the Symbol mode. (See “Selecting a Character

ᮣ

Input Mode” on page 42.) To enter a symbol, press the

appropriate key indicated on the display.

To enter “emoticons” (smileys):

ᮣ

Select the Emoticons mode and press the

appropriate key. (See “Selecting a Character Input

Mode” on page 42.)

To enter preset messages:

1. Select the Preset Msg mode. (See “Selecting a Character

Input Mode” on page 42.)

2. Scroll to the desired preprogrammed message and

press

Preset messages make composing text messages even easier

by allowing you to enter preset messages, such as “Meet me

at,” “Let’s get lunch,” or a customized preset message of your

own. (For more information on preset messages, please see

“Managing Preset Messages ” on page 60.)

Note:

Section 2A: Yo ur Phone: The Basics

Section 2B

Controlling Your Phone’s Settings

In This Section

ࡗ

TTY Use With Sprint PCS Service

Updating Phone Software

Phone Setup Options

Call Setup Options

Using the menu options available on your phone, you can

customize your phone to sound, look, and operate just the way

you want it to. This section describes how you can change your

phone’s settings to best suit your needs. Take a few moments

to review these options and to adjust or add settings that are

right for you.

Section 2B: Controll ing Your Phone’s Settings

Sound Settings

Ringer Types

Ringer types help you identify incoming calls and messages.

You can assign ringer types to individual Contacts entries,

types of calls, and types of messages.

ⅷ

Preprogrammed Ringers include a variety of standard

ringer types.

Vibrating Ringer alerts you to calls or messages without

disturbing others.

Downloaded Ringers can be downloaded right to your

phone. (See “Downloading Premium Services Content” on

page 206.)

Selecting Ringer Types for Voice Calls

Your phone provides a variety of ringer options that allow you

to customize your ring and volume settings. These options

allow you to identify incoming calls by the ring.

To select a ringer type for voice calls:

1. Select Menu > Settings > Sounds > Ringer Type >

Voice Calls.

2. Select With Caller ID or No Caller ID.

3. Select Single Tones, Ring Tones, Melodies, or My Contents

and press

. (The list of ringers or videos is displayed.)

4. Use your navigation key to scroll through the available

ringers. A sample ringer will sound as you highlight

each option.

5. Press

Section 2B: Controlli ng Your Phone’s Settings

Selecting Ringer Types for Messages

To select a ringer type for messages:

1. Select Menu > Settings > Sounds > Ringer Type >

Messages.

2. Select Voicemail, Text Message or Picture Mail.

3. Select Single Tones, Ring Tones, Melodies, or My Contents

and press

. (The list of preprogrammed ringers is

displayed.)

4. Use your navigation key to scroll through the available

ringers. A sample ringer will sound as you highlight

each option.

5. Press

to assign the desired ringer.

Selecting Ringer Types for Scheduled Events

To select a ringer type for scheduled events:

1. Select Menu > Settings > Sounds > Ringer Type > Schedule.

2. Select Single Tones, Ring Tones, Melodies, or My Contents

and press

. (The list of preprogrammed ringers is

displayed.)

3. Use your navigation key to scroll through the available

ringers. A sample ringer will sound as you highlight

each option.

4. Press

to assign the desired ringer.

Section 2B: Controll ing Your Phone’s Settings

Selecting Ringer Types for Roam Ringer

To select a ringer type for roam ringer:

1. Select Menu > Settings > Sounds > Ringer Type >

Roam Ringer.

2. Select Normal or Distinctive and press

Selecting a Key Tone

Your phone offers a number of options for selecting the

audible tones accompanying a keypress. (Longer tone lengths

may be better for tone recognition when dialing voicemail or

other automated systems.)

To select a key tone:

1. Select Menu > Settings > Sounds > Key Tone.

2. Select Tone Type and press

3. Select DTMF, Xylophone, or Simple and press

Key Tone Level

Your phone allows you to set the desired volume level of the

key tones.

To set the key tone level:

1. Select Menu > Settings > Sounds > Key Tone > Tone Level.

2. Press

left or right until you hear the desired tone

level and press

Section 2B: Controlli ng Your Phone’s Settings

Key Tone Length

The key tone length allows you to choose between short or

long tones when pressing a key. Longer tone lengths may be

better for tone recognition when dialing voicemail or other

automated systems.

To set the key tone length:

1. Select Menu > Settings > Sounds > Key Tone >

Tone Length.

2. Select Short or Long and press

Adjusting the Phone’s Ringer Volume

You can adjust your phone’s ringer volume to suit your needs

and your environment.

To adjust your phone’s ringer volume:

1. Select Menu > Settings > Sounds > Volume.

2. Select Ringer.

3. Use the navigation key to choose a volume level and

select Done (

). (Select Always Vibrate to make the

ringer vibrate at any volume level.)

You can adjust the ringer volume in standby mode (or the

earpiece volume during a call) by using the volume key on the

left side of your phone.

Tip:

Section 2B: Controll ing Your Phone’s Settings

Adjusting the Phone’s Volume Settings

You can adjust your phone’s volume settings to suit your

needs and your environment.

To adjust your phone’s volume settings:

1. Select Menu > Settings > Sounds > Volume.

2. Select Ringer, Speakerphone, Text Message, Picture Mail,

Voicemail, Alarms, App. Volume, or Ready Link and

press

3. Select Use Ringer Volume to use the ringer settings, or

select Separate Volume.

4. Use the navigation key to choose a volume level and

select Done (

). (Select Always Vibrate to make the

ringer vibrate at any volume level.)

Alert Notification

Your phone can alert you with an audible tone when you

change service areas, once a minute during a voice call, when

the signal fades, when powering your phone on or off, or

when a call has been connected.

To enable or disable alert sounds:

1. Select Menu > Settings > Sounds > Alerts.

2. Select Minute Beep, Service, Connect, Sig. Fade Tone, or

Power On/Off and press

If Power On/Off is selected, choose On or Off and press OK.

Note:

3. Select On or Off and press

Section 2B: Controlli ng Your Phone’s Settings

Silence All

There may be times when you need to silence your phone

entirely. The phone’s Silence All option allows you to mute all

sounds without turning your phone off.

To activate Silence All:

ᮣ

With the phone open, press and hold the volume

key down in standby mode. (The screen will display

“Silence All.”)

To deactivate Silence All:

ᮣ

Press the volume key up repeatedly to select a desired

volume level.

TTS

TTS or Text to Speech allows you to have the menu items read

aloud as they are selected in the menu. When TTS is enabled,

the key tone sound will be turned off.

To enable TTS:

1. Select Menu > Settings > Sounds > TTS > TTS Mode.

2. Press the navigation key up or down to select Enable and

press

To change the volume:

1. Select Menu > Settings > Sounds > TTS > TTS Volume.

2. Press the navigation key left or right to select the

desired volume level and press

Section 2B: Controll ing Your Phone’s Settings

Display Settings

Changing the Text Greeting

The text greeting can be up to 14 characters and is displayed

on your phone’s screen in standby mode. You may choose to

keep the phone’s default greeting (“Sprint”), or you may enter

your own custom greeting.

To display or change your greeting:

1. Select Menu > Settings > Display > Greeting > Custom.

2. Enter a custom greeting using your keypad and press

. (See “Entering T ext” on page 42.) (To erase the

existing greeting one character at a time, press

To erase the entire greeting, press and hold

Changing the Backlight Time Length

The backlight setting lets you select how long the display

screen and keypad are backlit after any keypress is made.

To change the backlight setting:

1. Select Menu > Settings > Display > Backlight >

Main Display.

2. Select a time setting and press

To change the keypad setting:

1. Select Menu > Settings > Display > Backlight > Keypad.

2. Select a time setting and press

Long backlight settings affect the battery’s talk and standby

times.

Note:

Section 2B: Controlli ng Your Phone’s Settings

Changing the Display Screen

Your new phone offers options for what you see on the

display screen and when in standby mode.

To change the display images on main LCD:

1. Select Menu > Settings > Display > Screen Saver.

2. Select Preset Image, My Content, or My Albums and

press

3. Choose the desired image and press

to assign it as a

screen saver.

Changing the Brightness

You can adjust your screen’s brightness to suit your

surroundings.

To adjust the display’s contrast:

1. Select Menu > Settings > Display > Backlight > Brightness.

2. Press your navigation key left or right to adjust the

brightness and press

Changing the Phone’s Menu Style

Your phone allows you to choose how the menu appears on

your display screen.

To select the display’s menu style:

1. Select Menu > Settings > Display > Menu Style.

2. Select Grid style 1 or Grid style 2 to view each main menu

item as a single screen icon, or List style to view the main

menu as a list, and press

Section 2B: Controll ing Your Phone’s Settings

Changing the Font Color

You can customize your phone’s display font by selecting a

color scheme or style to reflect your personality.

To change the display’s theme color:

1. Select Menu > Settings > Display > Dialing Font > Color.

2. Select Basic, Rainbow, Monochrome, or Hyphenate and

press

Changing the Dialing Font

This setting allows you to adjust the display appearance

when dialing phone numbers.

To change the dialing font:

1. Select Menu > Settings > Display > Dialing Font > Size.

2. Select Large, Medium, or Small and press

Section 2B: Controlli ng Your Phone’s Settings

Location Settings

Your phone is equipped with a Location feature for use in

connection with location-based services that may be

available in the future.

The Location feature allows the network to detect your

position. Turning Location off will hide your location from

everyone except 911.

Turning Location on will allow the network to detect your

position using GPS technology, making some Sprint PCS

applications and services easier to use. Turning Location off

will disable the GPS location function for all purposes except

911, but will not hide your general location based on the cell

site serving your call. No application or service may use your

location without your request or permission. GPS-enhanced

911 is not available in all areas.

Note:

To enable your phone’s Location feature:

1. Select Menu > Settings > Others > Location. (The Location

disclaimer is displayed.)

2. Read the disclaimer and press

3. Select On or Off press

When the Location feature is on, your phone’s standby screen

will display the icon. When Location is turned off, the

icon will be displayed.

Section 2B: Controll ing Your Phone’s Settings

Messaging Settings

Staying connected to your friends and family has never been

easier. With your phone’s advanced messaging capabilities,

you can send and receive many different kinds of text

messages without placing a voice call. (For more information,

see “A ccessing Messaging” on page 203.)

Your phone’s messaging settings make text messaging even

faster and easier by letting you decide how you would like to

be notified of new messages, create a signature with each

sent message, and create your own canned messages, to

name just a few.

Setting Message Alerts

When new messages arrive, you can choose to have your

phone notify you by playing an audible alert.

To hear an alert when you receive a new message:

1. Select Menu > Messaging > Settings > Message Alerts.

2. Select Alert Volume, Alert Type, or Reminder and

press

3. Select the desired options and press

Section 2B: Controlli ng Your Phone’s Settings

Deleting Old Messages

You can delete messages that you’ve already read whenever

you like, or you can have your phone delete them

automatically for you when your phone's message memory

becomes full.

To automatically delete read messages:

1. Select Menu > Messaging > Settings > Auto Erase.

2. Select Yes or No and press

Adding a Customized Signature

Each message you send can have a customized signature to

reflect your personality.

To add a customized signature to each sent message:

1. Select Menu > Messaging > Settings > Edit Signature.

2. Select On and press

signature to your outgoing messages, select Off and

press

. (If you do not wish to attach a

3. Enter your signature and press Done (

). (See

“Entering T e xt” on page 42.)

Section 2B: Controll ing Your Phone’s Settings

Managing Preset Messages

Your phone is programmed with 10 preset messages to help

make sending text messages faster and easier. These messages,

such as “Where are you?,” “Let’s get lunch,” and “Meet me at,”

can be customized or deleted to suit your needs. You can even

add your own preset messages to the list (up to 20 messages

total).

To edit or delete a preset message:

1. Select Menu > Messaging > Settings > Preset Messages.

(The list of preset messages is displayed.)

2. To edit or delete a preset message, highlight it and press

Edit (

). (See “Entering Text” on page 42.)

– or –

Select Options(

), and then select Erase to delete the

selected message. Select Yes to confirm. (Select Noto

cancel the deletion.)

To add a new preset message:

1. Select Menu > Messaging > Settings > Preset Messages.

(The list of preset messages is displayed.)

2. To add a new message, select the desired message

location, press Options (

3. Enter your message (see “Entering T ext” on page 42),

and press . (Your new message will be added to the

) and select Add New.

beginning of the list.)

Section 2B: Controlli ng Your Phone’s Settings

Airplane Mode

Airplane Mode allows you to use many of your phone’s

features, such as Games, Notepad, and Voice Memos when

you are in an airplane or in any other area where making or

receiving calls or data is prohibited. When your phone is in

Airplane Mode, it cannot send or receive any calls or access

online information.

To set your phone to Airplane Mode:

1. Select Menu > Settings > Others > Airplane Mode.

2. Read the disclaimer and press

3. Select On or Off and press

While in Airplane Mode, your phone’s standby screen will

display “Phone off.”

TTY Use With Sprint PCS Service

A TTY (also known as a TDD or Text Telephone) is a

telecommunications device that allows people who are

deaf, hard-of-hearing, or who have speech or language

disabilities to communicate by telephone.

Your phone is compatible with select TTY devices. Please

check with the manufacturer of your TTY device to ensure

that it supports digital wireless transmission. Your phone and

TTY device will connect via a special cable that plugs into your

phone's headset jack. If this cable was not provided with your

TTY device, contact your TTY device manufacturer to purchase

the connector cable.

Section 2B: Controll ing Your Phone’s Settings

When establishing your Sprint PCS Service, please call Sprint

Customer Service via the state Telecommunications Relay

Service (TRS) by first dialing

. Then provide

the state TRS with this number: 866-727-4889.

To turn TTY Options on or off:

1. Press Menu > Settings > Others > TTY Mode from standby

mode. (An informational message is displayed.)

2. Press

3. Select TTY Off, TTY + Hear, TTY+ Talk, or TTY Full and

press

In TTY Mode, your phone will display the TTY access icon

when a headset or TTY device is plugged in.

Note:

If TTY mode is enabled, the audio quality of non-TTY

devices connected to the headset jack may be impaired.

911 Emergency Calling

WARNING

Sprint recommends that TTY users make emergency

calls by other means, including Telecommunications

Relay Services (TRS), analog cellular, and landline

communications. Wireless TTY calls to 911 may be

corrupted when received by public safety answering

points (PSAPs), rendering some communications

unintelligible. The problem encountered appears

related to TTY equipment or software used by PSAPs.

This matter has been brought to the attention of the

FCC, and the wireless industry and PSAP community

are currently working to resolve this.

Section 2B: Controlli ng Your Phone’s Settings

Updating Phone Software

The update phone software option allows you to download

and update the software in your phone automatically. Only

the internal software is updated; no Contacts entries or other

information saved to your phone will be deleted.

To update your phone:

1. Press Menu > Settings > Others > Update Phone SW from

standby mode.

2. Follow the onscreen instructions.

Phone Setup Options

Display Language

You can choose to display your phone’s onscreen menus in

English or in Spanish.

To assign a language for the phone’s display:

1. Select Menu > Settings > Others > Language.

2. Select English or Español and press

Section 2B: Controll ing Your Phone’s Settings

Call Setup Options

Call Setup options allow you to set up the following options:

ⅷ

Abbreviated Dial allows you to program a five- or six-digit

prefix for commonly used phone numbers.

ⅷ

Contact Match allows you to turn the Contacts matching

feature on or off.

ⅷ

Restriction allows you to restrict outgoing calls.

Call Answer allows you to set up how you answer

incoming calls.

ⅷ

Auto Answer allows you to answer incoming calls

automatically with the optional hands-free car kit.

Abbreviated Dialing

Abbreviated dialing allows you to program a five- or six-digit

prefix for commonly used phone numbers. When abbreviated

dialing is on, you can enter the last four or five digits of any

phone number that matches the five- or six-digit prefix, and

the number is dialed.

To set up abbreviated dialing:

1. Select Menu > Settings > Others > Call Setup > Abbrev. Dial.

2. Select On or Off and press

3. Input the five- or six-digit prefix (for example, area code

and prefix) and press

Section 2B: Controlli ng Your Phone’s Settings

Making an Abbreviated Dial Call

To make a call:

1. Enter the last four or five digits of the prefix phone

number.

2. Abbrev. Dial is displayed in the lower left corner with the

prefix digits displayed.

If there is more than one Contacts entry that matches the last

four or five digits, a list is displayed which allows you to select

the desired number to call.

Note:

3. Press

to make the call.

Contact Match

With the Contact Match feature, your phone displays the

contact’s name and phone number if the incoming call or

outgoing call is in your Contacts list.

To access Contact Match:

1. Select Menu > Settings > Others > Call Setup >

Contact Match.

2. Select On or Off and press

Section 2B: Controll ing Your Phone’s Settings

Restriction

Allows you to restrict outgoing call options by selecting one

of the following options:

ⅷ

Allow all to allow outgoing calls to be made (no

restrictions).

Contacts only to allow outgoing calls to only those

numbers saved in the Contacts list.

Special# only to allow outgoing calls to only the numbers

set up in the special numbers list. (See “Using Special

Numbers” on page 73.)

To access call restriction:

1. Select Menu > Settings > Others > Call Setup > Restriction.

2. Enter your lock code.

3. Select Outgoing Call and press

4. Select Allow all, Contacts only, or Special# only and

press

Call Answer Mode

You can determine how to answer incoming calls on your

phone, whether by pressing

, by pressing any number key,

or simply by opening the phone.

To set call answer mode:

1. Select Menu > Settings > Others > Call Setup > Call Answer.

2. To select an option, highlight it and press

Ⅲ

Any key to allow an incoming call to be answered by

opening the phone or pressing any key.

Talk key to require

to be pressed to answer all

incoming calls.

Flip open to answer the call when the phone is

opened.

Section 2B: Controlli ng Your Phone’s Settings

Auto Answer Mode

You may set your phone to automatically pick up incoming

calls when connected to an optional hands-free car kit or a

headset.

To set Auto Answer mode:

1. Select Menu > Settings > Others > Call Setup >

Auto Answer.

2. Select Yes to answer calls automatically when the phone

is connected to a hands-free car kit or a headset (sold

separately). Remember, your phone will answer calls in

Auto Answer mode even if you are not present.

Section 2B: Controll ing Your Phone’s Settings

Section 2C

Setting Your Phone’s Security

In This Section

ࡗ

Accessing the Security Menu

Using Your Phone’s Lock Feature

Lock Services

Using Special Numbers

Security Features for Sprint PCS Vision

By using the security settings on your phone, you receive peace of

mind without sacrificing flexibility. This section will familiarize

you with your phone’s security settings. With several options

available, you can customize your phone to meet your

personal needs.

Section 2C: Setting Your Phone’s Security

Accessing the Security Menu

All of your phone’s security settings are available through the

Security menu. You must enter your lock code to view the

Security menu.

To access the Security menu:

1. Select Menu > Settings > Security.

2. Enter your lock code to display the Security menu.

If you can’t recall your lock code, try using the last four digits

of either your Social Security number or wireless phone

number or try 0000 or NATL (6285). If none of these work, call

Sprint Customer Service at 1-888-211-4PCS (4727).

Tip:

Using Your Phone’s Lock Feature

Locking Your Phone

When your phone is locked, you can only receive incoming

calls or make calls to 911, Sprint Customer Service, or special

numbers. (See “Using Special Numbers” on page 73.)

To lock your phone:

1. From the Security menu, select Lock Phone.

2. Highlight Lock now and press

lock the next time it is turned on, select On power-up

and press

. (To set your phone to

Section 2C: Setting Your Phone’s Security

Unlocking Your Phone

To unlock your phone:

1. From standby mode, press Talk, Left/Right softkey,

Volume key, or Menu/OK key.

2. Enter your lock code.

Calling in Lock Mode

You can place calls to 911 and to your special numbers when

in lock mode. (For information on special numbers, see

“Using Special Numbers” on page 73.)

To place an outgoing call in lock mode:

ᮣ

To call an emergency number, special number, or Sprint

Customer Service, enter the phone number and press

Changing the Lock Code

To change your lock code:

1. Select Menu > Settings > Security.

2. Enter your lock code. (The Security menu is displayed.)

3. Select Change Lock.

4. Enter your new lock code and press Next (

5. Re-enter your new lock code and press Done (

Section 2C: Setting Your Phone’s Security

Lock Services

This setting allows you to lock voice call functions and

Sprint PCS Vision services. When you enable Lock Services,

you will be unable to make new calls (excluding emergency

numbers) or to access the Vision services until the lock has

been disabled in the Security menu.

Locking Voice Services

1. Select Menu > Settings > Security.

2. Enter your lock code. (The Security menu is displayed.)

3. Select Lock Service and press

4. Select Voice and press

5. Select Lock and press

Locking Sprint PCS Vision

1. Select Menu > Settings > Security.

2. Enter your lock code. (The Security menu is displayed.)

3. Select Lock Service and press

4. Select PCS Vision and press

5. Select Lock and press

Locking Camera

1. Select Menu > Settings > Security.

2. Enter your lock code. (The Security menu is displayed.)

3. Select Lock Service and press

4. Select Camera and press

5. Select Lock and press

Section 2C: Setting Your Phone’s Security

Locking Ready Link

1. Select Menu > Settings > Security.

2. Enter your lock code. (The Security menu is displayed.)

3. Select Lock Service and press

4. Select Ready Link and press

5. Select Lock and press

Using Special Numbers

Special numbers are important numbers that you have

designated as being “always available.” You can call and

receive calls from special numbers even if your phone is

locked.

You can save up to three special numbers in addition to

your Contacts entries. (The same number may be in both

directories.)

To add or replace a special number:

1. Select Menu > Settings > Security.

2. Enter your lock code. (The Security menu is displayed.)

3. Select Special #.

4. Select a location for your entry and press

5. Enter the number and press

There are no speed dial options associated with special

numbers.

Note:

Section 2C: Setting Your Phone’s Security

Erasing Contacts

You can quickly and easily erase all the contents of your

Contacts list.

To erase all the names and numbers in your Contacts:

1. Select Menu > Settings > Security.

2. Enter your lock code. (The Security menu is displayed.)

3. Select Erase > Erase Contacts.

4. If you are certain you would like to erase all of your

Contacts entries, select Yes and press

Erasing My Content

You can use your phone’s security menu to erase all content

you have downloaded to your phone.

To erase all downloads:

1. Select Menu > Settings > Security.

2. Enter your lock code. (The Security menu is displayed.)

3. Select Erase > Erase My Contents.

4. If you are certain that you would like to erase all content

downloaded to your phone, select Yes and press

Section 2C: Setting Your Phone’s Security

Erasing Voice Memos

You can use your phone’s security menu to erase all voice

memos saved in your phone.

To erase all voice memos:

1. Select Menu > Settings > Security.

2. Enter your lock code. (The Security menu is displayed.)

3. Select Erase > Erase Voice Memo.

If you are certain that you would like to erase all voice memos

saved in your phone, select Yes and press

Erasing Pictures

You can use your phone’s security menu to erase all pictures

saved in your phone.

To erase all pictures:

1. Select Menu > Settings > Security.

2. Enter your lock code. (The Security menu is displayed.)

3. Select Erase > Erase Pictures.

If you are certain that you would like to erase all pictures

saved in your phone, select Yes and press

Section 2C: Setting Your Phone’s Security

Erasing Messages

You can use your phone’s security menu to erase all messages

saved in your phone.

To erase all messages:

1. Select Menu > Settings > Security.

2. Enter your lock code. (The Security menu is displayed.)

3. Select Erase > Erase Messages.

If you are certain that you would like to erase all messages

saved in your phone, select Yes and press

Default Settings

The default settings option restores only those options that

were set at the factory, including screen savers and

ringer options.

To reset to default settings:

1. Select Menu > Settings > Security.

2. Enter your lock code. (The Security menu is displayed.)

3. Select Default Settings and press

4. Select Yes and press

5. Select Yes again and press

to confirm.

Section 2C: Setting Your Phone’s Security

Resetting Your Phone

Resetting the phone restores all the factory defaults,

including the ringer types and display settings. (Contacts are

also deleted when resetting your phone.)

Resetting your phone deletes all files that you have

downloaded.

Caution!

To reset your phone:

1. Select Menu > Settings > Security.

2. Enter your lock code. (The Security menu is displayed.)

3. Select Reset Phone and press

4. If you are certain that you would like to restore all the

factory settings, select Yes and press

Security Features for Sprint PCS Vision

Enabling and Disabling Sprint PCS Vision Services

You can disable Sprint PCS Vision services without turning off

your phone; however, you will not have access to all Sprint PCS

Vision services, including Web and messaging. Disabling Sprint

PCS Vision will avoid any charges associated with Vision

services. While signed out, you can still place or receive phone

calls, check voicemail, and use other voice services. You may

enable Sprint PCS Vision services again at any time.

To disable Sprint PCS Vision services:

ᮣ

Select Menu > Settings > PCS Vision > Disable Vision.

(A message will appear.)

Section 2C: Setting Your Phone’s Security

To enable Sprint PCS Vision services:

ᮣ

Select Menu > Settings > PCS Vision > Enable Vision.

(A message will appear.)

Section 2D

Controlling Your Roaming Experience

In This Section

ࡗ

Understanding Roaming

Setting Your Phone’s Roam Mode

Using Call Guard

Data Roaming

Roaming is the ability to make or receive calls when you’re off the

Nationwide Sprint PCS Network. Your new digital dual-band

A640 by Samsung® works anywhere on the Nationwide

Sprint PCS Network and allows you to roam on other 1900

and 800 MHz digital networks where we’ve implemented

roaming agreements with other carriers.

This section explains how roaming works as well as special

features that let you manage your roaming experience.

Section 2D: Controlling Your Roaming Experience

Understanding Roaming

Recognizing the Roaming Icon on the Display Screen

Your phone’s display screen always lets you know when

you’re off the Nationwide Sprint PCS Network. Any time you

are roaming, the phone displays the roaming icon (

Remember, when you are using your phone off the

Nationwide Sprint PCS Network, always dial numbers using

11 digits (1 + area code + number).

Tip:

Unless your Sprint PCS Service Plan includes roaming, you will

pay a higher per-minute rate for roaming calls.

Note:

Roaming on Other Digital Networks

When you’re roaming on digital networks, your call quality

and security will be similar to the quality you receive when

making calls on the Nationwide Sprint PCS Network.

However, you may not be able to access certain features, such

as Sprint PCS Vision.

If you’re on a call when you leave the Nationwide Sprint PCS

Network and enter an area where roaming is available, your

call is dropped. If your call is dropped in an area where you

think Sprint PCS Service is available, turn your phone off and

on again to reconnect to the Nationwide Sprint PCS Network.

Note:

Checking for Voicemail Messages While Roaming

When you are roaming off the Nationwide Sprint PCS

Network, you will not receive on-phone notification of new

voicemail messages. Callers can still leave messages, but you

will need to periodically check your voicemail for new

messages if you are in a roaming service area for an extended

time.

Section 2D: Controlling Your Roaming Experience

To check your voicemail while roaming:

1. Dial 1 + area code + your wireless phone number.

2. When you hear your voicemail greeting, press

3. Enter your passcode at the prompt and follow the voice

prompts.

When you return to the Nationwide Sprint PCS Network,

voicemail notification will resume as normal.

Setting Your Phone’s Roam Mode

Your phone allows you to control your roaming capabilities.

By using the Roaming menu option, you can determine which

signals your phone accepts.

Set Mode

Choose from three different settings on your digital dual-

band phone to control your roaming experience.

To set your phone’s roam mode:

1. Select Menu > Settings > Roaming > Set Mode.

2. To select an option, highlight it and press

Ⅲ

Automatic seeks Sprint PCS Service. When Sprint PCS

Service is unavailable, the phone searches for an

alternate system.

Roaming only forces the phone to seek a roaming

system. The previous setting (Sprint or Automatic) is

restored the next time the phone is turned on.

Sprint allows you to access the Nationwide

Sprint PCS Network only and prevents roaming on

other networks.

Section 2D: Controlling Your Roaming Experience

Using Call Guard

Your phone has two ways of alerting you when you are

roaming off the Nationwide Sprint PCS Network: the

onscreen roaming icon and Call Guard. Call Guard makes it

easy to manage your roaming charges by requiring an extra

step before you can place or answer a roaming call. (This

additional step is not required when you make or receive calls

while on the Nationwide Sprint PCS Network.)

To turn Call Guard on or off:

1. Select Menu > Settings > Roaming > Call Guard.

2. Highlight On or Off and press

Voice dialing and speed dialing are not available when you

are roaming with Call Guard enabled.

Note:

To place roaming calls with Call Guard on:

1. From standby mode, dial 1 + area code + the seven-digit

number and press

2. A message is displayed stating “Roaming rate applies.

Press 1 to call.” To place the call, press

To answer incoming roaming calls with Call Guard on:

1. Press

2. A message is displayed stating “Roaming rate applies.

Press 1 to answer.” To answer the call, press

Section 2D: Controlling Your Roaming Experience

Data Roaming

The data roaming option allows you to send and receive data

while you are out of your normal coverage area. All applicable

charges apply for accessing the available network.

To turn data roaming on or off:

1. Select Menu > Settings > Roaming > Data Roaming.

2. Highlight On or Off and press

Section 2D: Controlling Your Roaming Experience

Section 2E

Managing Call History

In This Section

ࡗ

Viewing History

Call History Options

Making a Call From Call History

Saving a Phone Number From Call History

Prepending a Phone Number From Call History

Erasing Call History

The Call History keeps track of incoming calls, calls made from

your phone, and missed calls. This section guides you through

accessing and making the most of your Call History.

Section 2E: Managi ng Call History

Viewing History

You’ll find the Call History feature very helpful. It is a list of

the last 20 phone numbers (or Contacts entries) for calls you

placed, accepted, or missed. Call History makes redialing a

number fast and easy. It is continually updated as new

numbers are added to the beginning of the list and the oldest

entries are removed from the bottom of the list.

Each entry contains the phone number (if it is available) and

Contacts entry name (if the phone number is in your

Contacts). Duplicate calls (same number and type of call) may

only appear once on the list.

To view a Call History entry:

1. Select Menu > Call History.

2. Select Outgoing Calls, Incoming Calls, Missed Calls, or

Recent Calls and press

3. Highlight the entry you wish to view and press

Section 2E: Managing Call History

Call History Options

For additional information and options on a particular call,

highlight a Call History entry and press

displays the date and time of the call, the phone number (if

available), and the caller’s name (if the number is already in

. This feature

your Contacts). By pressing Options (

), you can select from

the following options:

ⅷ

Call: Speaker to call the highlighted number using the

speakerphone option.

Send Msg to send a Text Msg., Picture, SMS Voice, or Hand

message.

Save to save the number if it is not already in your

Contacts. (See “Saving a Phone Number From Call

History” on page 88.)

ⅷ

Prepend to add numbers to the beginning of the selected

number. (See “Prepending a Phone Number From Call

History” on page 89.)

ⅷ

Erase to delete the entry.

Erase All to delete all entries listed.

You can also view the next Call History entry by pressing the

navigation key right or view the previous entry by pressing

the navigation key left.

Tip:

Section 2E: Managi ng Call History

Making a Call From Call History

To place a call from Call History:

1. Select Menu > Call History.

2. Select Outgoing Calls, Incoming Calls, Missed Calls, or

Recent Calls and press

3. Use your navigation key to select a Call History entry

and press

You cannot make calls from Call History to entries identified

as No Caller ID, Unknown, or Restricted.

Note:

Saving a Phone Number From Call History

Contacts entries can store up to a total of five phone

numbers, and each entry’s name can contain 20 characters.

To save a phone number from Call History:

1. Select Outgoing Calls, Incoming Calls, Missed Calls, or

Recent Calls and press

2. Use your navigation key to select the desired entry and

select Options ( ).

3. Select Save and press

4. Select New Entry and press

5. Select a Type and press

6. Enter a name for the entry using the keypad and

press

Section 2E: Managing Call History

7. Select Done (

) to save and exit.

After you have saved the number, the Find screen is

displayed. (See “Finding Contacts Entries” on page 93.)

You cannot save phone numbers already in your Contacts or

from calls identified as No Caller ID, Unknown, or Restricted.

Note:

Prepending a Phone Number From

Call History

If you need to make a call from Call History and you happen

to be outside your local area code, you can add the

appropriate prefix by prepending the number.

To prepend a phone number from Call History:

1. Select a Call History entry, select the number or the

name and press

2. Press Options (

) and select Prepend.

3. Enter the prefix and press

Erasing Call History

To erase individual Call History entries, see “Call History

Options” on page 87.

To erase Call History:

1. Select Menu > Call History.

2. Select Outgoing Calls, Incoming Calls, Missed Calls, or

Recent Calls and press

3. Press Options ( ) and select Erase for the highlighted

entry or Erase All for all entries and press

Section 2E: Managi ng Call History

Section 2F

Using Contacts

In This Section

ࡗ

Adding a New Contacts Entry

Finding Contacts Entries

Contacts Entry Options

Adding a Phone Number to a Contacts Entry

Editing a Contacts Entry’s Phone Number

Assigning Speed Dial Numbers

Editing a Contacts Entry

Selecting a Ringer Type for an Entry

Wireless Backup

Dialing Sprint PCS Services

Now that you know the basics that make it easier to stay in

touch with people and information, you’re ready to explore your

phone’s more advanced features. This section explains how to

use your phone’s Contacts and helps you make the most of

your contacts and time when you are trying to connect with

the important people in your life.

Section 2F : Using Contacts

Adding a New Contacts Entry

Your phone's Contacts list can store up to 299 entries and

each entry’s name can contain 20 characters.

To add a new entry:

1. Select Menu > Contacts > Add New Entry.

Enter the phone number in standby mode and press

OK. Proceed with steps 2-5.

Shortcut:

2. Enter a name for the new entry and press the navigation

key down. (See “Entering T ext” on page 42.)

3. Enter the phone number and press

4. Highlight the desired label entry (Mobile, Home, Work,

Pager, or Others) and press

5. Select Done ( ).

After you have saved the number, the Find entry screen is

displayed. (See “Finding Contacts Entries” on page 93.)

Section 2F: Using Con tacts

Finding Contacts Entries

There are several ways to display your Contacts entries: by

name, by speed dial number, by group, and by voice dial tags.

Follow the steps outlined in the sections below to display

entries from the Contacts menu.

Finding Names

To find Contacts entries by name:

1. Select Menu > Contacts > Find.

2. Scroll through all the entries using your navigation key.

– or –

3. Enter the first letter of a name or part of a name (such

as “ave” for “Dave”). (The more letters you enter, the

more your search narrows.)

4. To display an entry, highlight it and press

5. To dial the entry’s default phone number, press

– or –

To display additional Contacts entries, press the

navigation key left or right.

From standby mode, press Contacts (right softkey) to

display the Contacts menu.

Shortcut:

Section 2F : Using Contacts

Finding Speed Dial Numbers

To find phone numbers you have stored in speed dial locations:

1. Select Menu > Contacts > Speed Dial #s.

2. Scroll through speed dial entries using your navigation

key. Speed dial numbers are displayed in numeric order.

– or –

Enter the number of a speed dial location using your

keypad.

3. To display an entry, highlight it and press

4. To dial the entry’s default phone number, press

Finding Group Entries

To find entries designated as part of a group:

1. Select Menu > Contacts > Group.

2. Scroll through the group titles using your navigation

key. To display entries belonging to a group, highlight

the group and press

3. Navigate through the group to find the desired contact.

4. To dial the entry’s default phone number, press

Section 2F: Using Con tacts

Contacts Entry Options

To access a Contacts entry’s options, highlight the entry and

press Options (

) > Edit. Highlight one of the options listed

below and press

ⅷ

[Contact Name] to edit the contact entry name.

ⅷ

[Add Number] to add a phone number to the entry. (See

“A dding a Phone Number to a Contacts Entry” on page 96.)

ⅷ

[Email] to add an email address to the entry.

[URL] to add a Web site’s URL to the entry.

[Nickname] to add a unique text identifier to the contact.

[Memo] to add a memo to the contact entry.

[Group] to assign the entry to a group.

[Ring] to assign a preprogrammed or downloaded ringer.

[Image] to assign a predefined image to a Contacts entry.

You can view the next entry by pressing the navigation key

right or view the previous entry by pressing the navigation

key left.

Tip:

Section 2F : Using Contacts

Adding a Phone Number to a Contacts

Entry

To add a phone number to an entry:

1. Display a Contacts entry (see “Finding Contacts Entries”

on page 93) and press

2. Press Edit ( ).

3. Highlight the desired label, enter the new phone

number, and press

4. Press Done ( ) to save the new number.

Editing a Contacts Entry’s Phone Number

To edit an entry’s phone number:

1. Display a Contacts entry (see page 93) and press

2. Press Edit ( ).

3. Highlight the number you wish to edit and press

4. Press

to clear one digit at a time, or press and

to erase the whole number.

hold

5. Re-enter or edit the number and press

6. Press Done ( ) to save the number.

Section 2F: Using Con tacts

Assigning Speed Dial Numbers

Your phone can store up to 99 phone numbers in speed dial

locations. For details on how to make calls using speed dial

numbers, see “Using Speed Dialing” on page 41.

Speed dial numbers can be assigned when you add a new

Contacts entry, when you add a new phone number to an

existing entry, or when you edit an existing number.

To assign a speed dial number to a new or existing phone number:

1. Add a phone number to a new or existing Contacts

entry. (See “A dding a New Contacts Entry” on page 92

or “A dding a Phone Number to a Contacts Entry” on

page 96.)

2. Highlight the contact entry and press

3. Select Edit ( ).

4. Highlight the desired number and select Options (

) >

Speed Dial.

5. Select an available speed dial location and press

for Assign.

6. Press Done (

) to return to the Contacts menu.

If you attempt to assign an already in-use speed dial location

to a new phone number, a dialog will appear asking if you

wish to replace the existing speed dial assignment. Select Yes

to assign the location to the new phone number and delete

the previous speed dial assignment.

Note:

Section 2F : Using Contacts

Editing a Contacts Entry

To make changes to an entry:

1. Display a Contacts entry and highlight the name of the

person you wish to edit.

2. Press Edit (

3. Highlight the part of the entry you wish to edit (Name,

Group, Ringer, etc.) and press

4. Edit the desired information and press

5. Press Done ( ) to save your changes.

Selecting a Ringer Type for an Entry

You can assign a ringer type to a Contacts entry so you can

identify the caller by the ringer type. (See “Ringer Types” on

page 48.)

To select a ringer type for an entry:

1. Display a Contacts entry and highlight the name of the

person you wish to edit.

2. Press Edit (

3. Highlight the current ringer type and press

4. Select the desired ringer category and press

down.

5. Press

left or right to scroll through available ringers.

(When you highlight a ringer type, a sample ringer will

sound.)

6. Press

to save the new ringer type.

) to save your changes.

7. Press Done (

Section 2F: Using Con tacts

Wireless Backup

This feature allows you to back up all of your Contacts to the

Sprint Web site and restore them if your phone is lost, stolen,

damaged, or replaced.

To use the wireless backup service, you are required to

activate the service from your phone.

Note:

Wireless backup can also be activated by selecting MENU >

Settings > Wireless Backup and following steps 2–4 below.

Note:

To activate Wireless Backup service:

1. Select Menu > Contacts > Wireless Backup.

2. Select Subscribe. (You will be prompted to confirm your

license status.)

3. Select Yes to continue and follow the onscreen

instructions to purchase the license.

4. Please wait while registering the license. (You will see a

confirmation screen if it has been successfully

registered.)

You can unsubscribe from the wireless backup service only

through the Sprint Web site.

Note:

Section 2F : Using Contacts

To subscribe to the wireless backup service, you will need to

purchase a license to use the wireless backup service via the

Sprint vending machine, accessed through the WAP browser

on your phone The license expires after a set period of time

and must be renewed regularly. As part of the initial

subscription process, a random wireless backup password is

generated. The randomly-generated password will be sent to

the handset as an SMS text message.

(Subscribe Launches the subscription process. If you are

already subscribed to wireless backup, Unsubscribe will be

displayed.)

To deactivate Wireless Backup service:

1. Select Menu > Contacts > Wireless Backup.

2. Select Unsubscribe. (A message will be displayed.)

3. Follow the onscreen instructions to unsubscribe from

the wireless backup service.

Alert

The Alert feature displays an alert each time a wireless

backup update is completed.

To activate the alert:

1. Select Menu > Contacts > Wireless Backup > Alert.

2. Select On or Off and press

Learn More

Learn More displays a short description of the features and

functionality of Wireless Backup.

To view the description:

ᮣ

Select Menu > Contacts > Wireless Backup > Learn More.

100

Section 2F: Using Con tacts

Dialing Sprint PCS Services

Your Contacts list is preprogrammed with contact numbers

for various Sprint PCS Services.

To dial a service from your Contacts:

1. Select Menu > Contacts > Services.

2. Select Account Info, Customer Service, Dir Assist, Sprint

Operator, or Sprint Voice Command.

3. Press

to place the call.

To dial a service from standby mode using your keypad:

1. Dial the appropriate service number:

Ⅲ

Account Info. –

Customer Service –

Dir Assist –

Sprint Operator –

Sprint Voice Command –

2. Press

to place the call.

Section 2F : Using Contacts

101

102

Section 2G

Using the Phone’s Scheduler and Tools

In This Section

ࡗ

Using Your Phone’s Scheduler

Using Your Phone’s Alarm Clock

Using Your Phone’s Memo Pad

Using Your Phone’s Tools

Your phone is equipped with several personal information

management features that help you manage your busy lifestyle.

This section shows you how to use these features to turn your

phone into a time management planner that helps you keep

up with your contacts, schedules, and commitments. It takes

productivity to a whole new level.

Section 2G: Using the Phone’s Schedul er and Tools

103

Using Your Phone’s Scheduler

Adding an Event to the Scheduler

Your Scheduler helps organize your time and reminds you of

important events.

To add an event:

1. Select Menu > Tools > Scheduler.

2. Using your navigation key, highlight the day to which

you would like to add an event and press

Press the navigation key up or down to scroll by week through

the Scheduler.

Tip:

3. Select Options (

) > Add New (

If there are not any events scheduled for the selected day, the

New Event screen is automatically displayed.

Note:

4. Enter a title for the event and press Next (

“Entering T e xt” on page 42.)

). (See

5. Select an initial time and date for the event by entering

the Start time and Date.

Ⅲ

Using your keypad, enter the start time and date for

the event.

6. Select an end time and date for the event by

highlighting the End time and Date.

Ⅲ

Using your keypad, enter the end time and date for

the event.

7. Select an alarm time for the event by highlighting the

alarm field and pressing the navigation key left or right

to select one of the following:

104

Section 2G: Using the Phone’s Scheduler and Tools

Ⅲ

No Alarm, On Time, 10min before, 30min before, or

1 Hr before.

8. Select Done (

) to save and exit.

Event Alerts

There are several ways your phone alerts you to scheduled

events:

ⅷ

By playing the assigned ringer type.

By illuminating the backlight.

ⅷ

Event Alert Menu

When your phone is turned on and you have an event alarm

scheduled, your phone alerts you and displays the event

summary. To silence the alarm and reset the schedule,

press

Viewing Events

To view your scheduled events:

1. Select Menu > Tools > Scheduler.

2. Using your navigation key, select the day for which you

would like to view events and press

. (If you have

events scheduled for the selected day, they will be listed

in chronological order.)

In the Scheduler view, days with events scheduled are

highlighted.

Tip:

3. To display the details of an event listed in the schedule,

highlight it and press

Section 2G: Using the Phone’s Schedul er and Tools

105

Going to Today’s Scheduler Menu

To go to the Scheduler menu for today’s date:

ᮣ

Select Menu > Tools > Today.

Erasing a Day’s Events

To erase a day’s scheduled events:

1. Select Menu > Tools > Scheduler.

2. Using your navigation key, highlight the day for which

you would like to erase events and press

In the Scheduler view, days with events scheduled are

highlighted.

Tip:

3. Press Options (

) and select Erase or Erase All. (An alert

will appear notifying you of the number of events to be

erased.)

4. Select Yes to confirm or No to cancel.

106

Section 2G: Using the Phone’s Scheduler and Tools

Using Your Phone’s Alarm Clock

Your phone comes with a built-in alarm clock with multiple

alarm capabilities.

To use the alarm clock:

1. Select Menu > Tools > Alarm Clock.

2. Select Alarm #1, Alarm #2, or Alarm #3 and press

3. Turn the alarm on or off by highlighting the activation

field.

Ⅲ

Press

left or right to select On or Off .

4. Select a time for the alarm by highlighting the time

field.

Ⅲ

Use your keypad to enter an alarm time.

5. Select a ringer type for the alarm by highlighting the

ringer field and pressing

left or right.

6. Select a repeating status for the alarm by highlighting

the Repeat field.

Ⅲ

Press

Sat&Sun, or Daily .

7. Select Done ( ).

left or right to select Once, MontoFri,

Section 2G: Using the Phone’s Schedul er and Tools

107

Using Your Phone’s Memo Pad

Your phone comes with a memo pad you can use to compose

and store reminders and notes to help keep you organized.

To compose a note:

1. Select Menu > Tools > Memo Pad .

If there are no memos saved yet, the New Memo screen is

automatically displayed.

Note:

2. Select Options (

) and press

for Add New.

3. Type your note using the numeric keypad and press

for Done. (See “Entering Text” on page 42.)

To read a saved note:

1. Select Menu > Tools > Memo Pad.

2. Highlight a note and press

To delete saved notes:

1. Select Menu > Tools > Memo Pad.

2. Highlight a note and select Options (

3. Select Erase or Erase All and press

4. Select Yes and press

If Erase All is selected, all memos saved in your phone will be

erased.

Note:

108

Section 2G: Using the Phone’s Scheduler and Tools

Using Your Phone’s Tools

In addition to helping you be more efficient and organized,

your phone offers useful and entertaining tools.

Using the Calculator

Your phone comes with a built-in calculator.

To use the calculator:

1. Select Menu > Tools > Calculator.

2. Enter the first number using your keypad.

Ⅲ

Press the navigation key up for Multiplication (x).

Press the navigation key down for Division (÷).

Press the navigation key left for Subtraction (-).

Press the navigation key right for Addition (+).

Press

for a decimal point.

Ⅲ

for a negative number.

to clear all numbers.

3. Enter the second number and press

for Equals (=).

Section 2G: Using the Phone’s Schedul er and Tools

109

Task List

This option allows you to manage daily tasks that include

dates, times, and priority levels.

1. Select Menu > Tools > Task List.

If there are no tasks saved, the New Task screen is

automatically displayed.

Note:

2. Select Options (

3. Enter the task name using the keypad and press

4. Select a due time by highlighting the Due Time field.

Using the keypad, enter the due time of the task.

5. Select a due date by highlighting the Due Date field.

Using the keypad, enter the due date of the task.

6. Select a priority level by highlighting the Priority field.

) > Add New .

Ⅲ

Press the navigation key left or right to select Low

or High.

7. Select Done (

) to save and exit.

110

Section 2G: Using the Phone’s Scheduler and Tools

Countdown

This option allows you to enter a timer that counts down to

an event based on a date and time specified.

1. Select Menu > Tools > Countdown.

If there are no countdowns saved, the New Countdown screen

is automatically displayed.

Note:

2. Select Options (

3. Enter the countdown name using the keypad and

press

4. Select a time by highlighting the Input Time field.

Using the keypad, enter the time of the countdown.

5. Select a date by highlighting the Input Date field.

Using the keypad, enter the date of the countdown.

) and press

for Add New.

Ⅲ

6. Select Done (

) to save and exit.

World Time

To view the time in 24 different locations:

1. Select Menu > Tools > World Time.

2. Press the navigation key left or right to scroll through

different cities and time zones.

3. Press Options (

) > DST Setting (

) to turn daylight

saving time on or off.

Section 2G: Using the Phone’s Schedul er and Tools

111

112

Section 2H

Using Your Phone’s Voice Services

In This Section

ࡗ

Activating Voice Recognition

Using Voice Dial

Using Contacts

Voice Memos

Phone Status Information

My Phone Number

Your phone’s Voice Services let you place calls using your voice,

store voice reminders, and record memos right on your phone.

This section includes easy-to-follow instructions on using

voice-activated dialing and managing voice memos.

Section 2H: Using Your Phone’s Voice Services

113

Activating Voice Recognition

Voice recognition allows you to say commands to perform

common functions supported by your phone. There is no

voice training required to use the voice recognition feature.

You simply say the predesignated command displayed on

your screen in a normal tone of voice to perform the desired

function.

To activate voice recognition:

1. Press and hold

. (The phone prompts you

to say a voice command.)

2. Wait for the beep and then say one of the following

commands:

Ⅲ

Voice Dial

Contacts

Voice Memo

Status

My Phone #

When it recognizes one of these commands, the phone

launches the associated application. If the phone does not

hear a command within approximately eight seconds, it

deactivates voice recognition without taking any action.

If you want to use a different button to activate voice

recognition, press the left softkey for Menu and select

Settings. Press 7 for Launch Pad. On this menu, you can

change button assignments, including the button used to

launch “Voice Dial,” which is the voice recognition

application.

Note:

114

Section 2H: Using Your Phone’s Voice Services

Using Voice Dial

Voice Dial allows you to dial any valid seven- or ten-digit

North American phone number or Contacts entry by speaking

the number or name naturally, without pausing.

Tips for using Voice Dial:

ⅷ

Voice Dial works best in quieter environments.

ⅷ

When saying a number (Digit Dialing), speak at a normal

speed and say each digit clearly. There is no need to pause

between digits.

ⅷ

The phone recognizes the digits one, two, three, four, five,

six, seven, eight, nine, and zero or oh. The phone does not

recognize numbers such as “one eight hundred” for “1-

800.” Instead, say “one-eight-zero-zero.”

ⅷ

The phone recognizes only valid seven- or ten-digit North

American phone numbers.

If your phone does not usually recognize you correctly

when you are using Digit Dial, try adapting Digit Dial to

your voice, which can significantly improve accuracy for

some speakers. (See “A dapting Digit Dial” on page 117 for

details.)

To place a call using Voice Dial:

1. Activate voice recognition by pressing and holding

(The phone prompts you for a command.)

2. Say “Voice Dial.” (The phone prompts you to say the

name or number clearly.)

3. Say a valid contact entry or seven- or ten-digit North

American phone number naturally and clearly, or say a

name from your Contacts.

4. If the phone asks you, “Did you say,” followed by the

correct name or number, say “Yes.”

Section 2H: Using Your Phone’s Voice Services

115

5. If the phone asks you, “Did you say,” followed by an

incorrect name or number, say “No.” (If there are other

alternatives, the phone will prompt you with the next

one. You can also select the desired number by using

the navigation key. The phone will then dial the

number.)

Enabling/Disabling Digit Dial Choice Lists

You can customize whether the Digit Dial feature displays the

list of top voice recognition choices or automatically dials the

first number, without displaying a choice list.

To enable or disable choice lists for Digit Dial:

1. Press Menu> Voice Kit > Voice Service.

2. Press

for Settings.

3. Select Choice Lists and press

4. Select Digit Dialing and press

5. Press the navigation key up or down to select Automatic,

Always On, or Always Off and press

116

Section 2H: Using Your Phone’s Voice Services

Adapting Digit Dial

Digit Dialing is speaker-independent, which means that no

training or adaptation is required. Some users with heavy

accents or unusual voice characteristics may find difficulty in

achieving high accuracy with speaker-independent Digit

Dialing, so the Adapt Digits feature allows users to

dramatically improve the digit accuracy through adaptation.

Users who get acceptable digit recognition accuracy will find

no additional benefit to performing the Adapt Digit

adaptation.

After you adapt Digit Dial, your phone will be customized to

your voice. Other people will not be able to use Digit Dial on

your phone unless they reset the phone to factory defaults.

Adapt Digit Dial ONLY if the system frequently misrecognizes

your speech. You can always restore the system to its original

factory setting.

Note:

Adaptation involves recording several digit sequences to

teach the system your voice. The adaptation process takes

about three minutes.

Tips for adapting Digit Dial:

ⅷ

Adapt digits in a quiet place.

Make sure you wait for the beep before starting to speak.

Speak clearly, but say each digit sequence naturally.

If you make a mistake while recording a sequence of

digits, or if there is an unexpected noise that spoils the

recording, you can say “No” or select No when the prompt

asks, “Did the recording sound OK?” You will then be

prompted to rerecord the sequence.

Section 2H: Using Your Phone’s Voice Services

117

To adapt Digit Dial to your voice:

1. Press Menu> Voice Kit > Voice Service.

2. Press

for Settings.

3. Select Digit Dialing and press

4. Select Adapt Digits and press

. (The phone displays

the first digit sequence.)

5. When you are ready to start recording, press

. (The

phone prompts you to say the first sequence of digits.)

6. Wait for the beep, and then repeat the digits using a

normal tone of voice. (The phone plays back your

recording and asks you if the recording sounds OK.)

Ⅲ

If the recording sounds OK (no mistakes and no

background noises), say “Yes.”

Ⅲ

If you need to rerecord the digits to fix any

problems, say “No.” (The phone then prompts you to

say the digits again.)

7. Wait for the beep, and then record the digits again.

(Repeat this step until you are satisfied with the

recording.)

8. After confirming that the recording sounds OK, repeat

the recording process with the next set of digits.

9. Repeat steps 8-10 for another nine sets of digits.

10. When you are finished with a full session, you will reach

a screen that reads, “Adaptation Complete.”

118

Section 2H: Using Your Phone’s Voice Services

Resetting Digit Dial Adaptation

To erase any adaptation and reset Digit Dial to its original state:

1. Press Menu> Voice Kit > Voice Service.

2. Press

for Settings.

3. Select Digit Dialing and press

4. Select Reset Digits and press

5. Press

to select OK.

Using Contacts

Contacts allows you to retrieve contact information for any

entry saved in your Contacts list by saying the full name of

the person.

To retrieve information using Contacts command:

1. Activate voice recognition by pressing and holding

(The phone will prompt you for a command.)

2. Say “Contacts.” (The phone will prompt you to say the

name.)

3. Say the full name of the person, exactly as it is entered

in your Contacts list. (The phone will play the name it

recognized through the earpiece, and then open the

contact information for that name.)

Enabling/Disabling Contacts Choice Lists

You can customize whether the Contacts feature displays a

list of choices for names that sound alike, or brings up

information for the first recognized name without displaying

a choice list.

Section 2H: Using Your Phone’s Voice Services

119

To enable or disable choice lists for the Contacts command:

1. Press Menu> Voice Kit > Voice Service.

2. Press

for Settings.

3. Select Choice Lists and press

4. Select Contacts and press

5. Press the navigation key up or down to select Automatic,

Always On, or Always Off and press . (When choice

lists are enabled for contacts, after you say the name,

the phone will display one or more names on the screen

and prompt you to confirm the name you spoke.)

Ⅲ

If the phone says, “Did you say,” followed by the

correct name, say “Yes.”

Ⅲ

If the phone says, “Did you say,” followed by an

incorrect name, say “No.” The phone then prompts

you with the next name, if there is one. If there are

no more names, the phone will say “Sorry, no match

found.”

Voice Memos

You can use your phone’s voice recognition feature or the

main menu option to record brief memos to remind you of

important events, phone numbers, or grocery list items.

Recording Voice Memos Using Voice Recognition

To record a voice memo using voice recognition:

1. Press and hold

to activate voice recognition. (The

phone prompts you to say a voice command.)

2. Wait for the beep and say “Voice Memo.”

3. Start recording the memo after the beep.

4. Select Finish ( ).

120

Section 2H: Using Your Phone’s Voice Services

Recording Voice Memos Using the Main Menu

Option

To record a voice memo using the main menu option:

1. Press Menu> Voice Kit > Voice Memo.

2. Select Record and press

. (The phone prompts you to

start recording after the beep.)

3. Wait for the beep and then start speaking. (As it is

recording, the phone displays a countdown timer that

shows how many seconds are left for recording.)

4. To pause the memo, select Pause ( ). To resume the

recording, select Resume (

5. To finish recording, select Finish ( ).

To record the other party during a phone call:

1. During a call, select Options ( ).

2. Select Voice Memo (A one-minute counter is displayed

on the screen to indicate the amount of time a single

voice memo can be recorded.)

Only incoming audio is recorded when Voice Memo is

selected during a call.

Note:

3. To pause the memo, select Pause ( ). To resume the

recording, select Resume ( ).

4. To finish recording, select Finish ( ).

A total of 10 one-minute memos can be recorded and saved.

Tip:

Section 2H: Using Your Phone’s Voice Services

121

Reviewing and Erasing Memos

To play the voice memos you have recorded:

1. Press Menu> Voice Kit > Voice Memo.

2. Select Review and press

. (The phone displays a list of

saved memos, with the first one selected.)

3. Highlight the desired memo and press

— or —

Press the number corresponding to the memo you want

to review.

To erase an individual memo:

1. Press Menu> Voice Kit > Voice Memo.

2. Select Review and press

3. Highlight the desired memo to erase and select

Options ( ) > Erase.

4. Select Yes and press

To erase all voice memos:

1. Press Menu> Voice Kit > Voice Memo.

2. Select Review and press

3. Select Erase All and press

4. Select Yes and press

122

Section 2H: Using Your Phone’s Voice Services

Phone Status Information

The voice recognition Status option gives you an update on

your phone's service, signal strength, and battery level.

To retrieve your phone's status information:

1. Press and hold

to activate voice recognition. (The

phone prompts you to say a voice command.)

2. Wait for the beep and say “Status.” (The following chart

outlines the status responses.)

No Coverage - When handset is scanning.

Sprint Coverage - Handset is on a non-roam system.

Digital Roam - Handset is on a digital roam system.

Coverage

High - Number of bars displayed is 4 or more.

Signal Strength

Good - Number of bars displayed is 2/3.

Low - Number of bars displayed is 0/1.

No Signal - Handset is scanning for system.

High - Number of bars displayed in the

battery icon is 3.

Battery

Medium - Number of bars displayed in the

battery icon is 2.

Low - Number of bars displayed in the

battery icon is 1.

Empty - Low battery alert.

Section 2H: Using Your Phone’s Voice Services

123

My Phone Number

You can use your phone’s Voice Services to hear and display

your phone number onscreen.

Getting Your Phone Number

To access your phone number:

1. Press and hold

to activate voice recognition. (The

phone prompts you to say a voice command.)

2. Wait for the beep and say “My Phone Number.”

124

Section 2I

Using the Built-in Camera

In This Section

ࡗ

Taking Pictures

Storing Pictures

Sending Sprint PCS Picture Mail

Managing Sprint PCS Picture Mail

Order Prints

Settings and Info

Your phone’s built-in camera gives you the ability to take full-

color digital pictures, view your pictures using the phone’s display,

and instantly send them to family and friends. It’s fun and as

easy to use as a traditional point-and-click camera: just take a

picture, view it on your phone’s display, and send it from your

phone to up to 10 people.

This section explains the features and options of your

phone’s built-in camera.

Section 2I: Using the Built-in Camera

125

Taking Pictures

Taking pictures with your phone’s built-in camera is as simple

as choosing a subject, pointing the lens, and pressing a

button. You can activate the phone’s camera mode whether

the phone is open or closed.

To take a picture with the phone open:

1. Press Menu > Pictures > Camera (Additional camera

options are available through the camera mode Options

menu. See “Camera Mode Options” on page 128 for

more information.)

To activate camera mode, you can also press the

camera button (see illustration).

Shortcut:

2. Using the phone’s main LCD as a viewfinder, aim the

camera lens at your subject. Press the volume key to

display the image right-side up or upside down.

3. Press

to capture the image. (The picture will

automatically be saved in the In Phone folder.)

Ⅲ

To return to camera mode to take another picture,

press the camera key.

4. Press

for Next:

Ⅲ

Send Msg to send the picture to up to 10 contacts at

one time. (See page 133 for details.)

Ⅲ

Upload to upload the picture you just took to the

Sprint PCS Picture Mail Web site (www.sprint.com/

picturemail). Depending on your settings, you may be

prompted to accept a Sprint PCS Vision connection.

Ⅲ

Assign to assign the picture as a Picture ID, Screen

Saver, or Incoming Call.

126

Section 2I: Using the Bui lt-in Camera

Ⅲ

Erase to delete the picture you just took.

Camera Mode to return to the camera to take

additional pictures.

Ⅲ

Review Pictures to go to the In Phone folder to review

your saved pictures.

Postcard to take a picture of handwritten text and

digitize the writing into your image. Once placed in

the image, you can modify the colors, placement,

and various other features.

Creating Your Sprint PCS Picture Mail Password

The first time you use any of the picture management

options involving the Sprint PCS Picture Mail Web site, you

will need to establish a Sprint PCS Picture Mail password

through your phone. This password will also allow you to sign

in to the Sprint PCS Picture Mail Web site at www.sprint.com/

picturemail to access and manage your uploaded pictures and

albums.

To create your Sprint PCS Picture Mail password:

1. Select Menu > Pictures > Online Albums.

2. Select View Albums or Upload Picture and press

(You will be prompted to Connect/Always Auto-connect.

Enable PCS Vision if necessary and create a Sprint PCS

Picture Mail password for your account by following the

onscreen instructions.)

If your Sprint PCS Service Plan does not include Sprint PCS

Picture Mail, you will first be prompted to subscribe to the

service for an additional monthly charge.

Note:

3. Enter a four- to eight-digit password and press

will be prompted to confirm your password.)

. (You

4. Please wait while the system creates your account.

Section 2I: Using the Built-in Camera

127

Write down your Sprint PCS Picture Mail password in a secure

place.

Tip:

Once you have received confirmation that your account has

been successfully registered, you may upload and share

pictures and access the Sprint PCS Picture Mail Web site.

Camera Mode Options

When the phone is open and in camera mode, press

display additional camera options:

ⅷ

Self Timer to activate the camera’s timer. (See “Setting the

Camera Self-Timer” on page 129.)

ⅷ

Fun Tools to select from the following options:

Ⅲ

Fun Frames to select your favorite fun picture frame

to decorate your picture.

Ⅲ

Color Tones to select a wide variety of color tones for

the picture (Auto, Sepia, Mono, Warm, or Cool). (The

default setting is Auto.)

ⅷ

Controls to select from the following options:

Ⅲ

Brightness to manually set the brightness. Press the

navigation key right (increase) or left (decrease) to

select a setting.

Ⅲ

White Balance to adjust white balance based on

changing conditions. Select from Auto, Sunny,

Cloudy, Tungsten, Fluorescent, or Manual.

ⅷ

Settings to select Resolution, Quality, Shutter Sound,

Auto Erase, or View Mode. (See “Selecting Camera

Settings” on page 130 for details.)

Review Pictures to go to your phone’s In Phone folder. (See

“In Phone Folder” on page 131 for details.)

128

Section 2I: Using the Bui lt-in Camera

Setting the Camera Self-Timer

To activate the self-timer:

1. From camera mode, select Options (

2. Highlight Self Timer and press

3. Highlight the length of delay you want the timer to use

(5 Seconds or 10 Seconds) and press

4. Press when you are ready to start the timer. (It is

displayed in the upper right portion of the main LCD

during the self-timer countdown.)

5. Get ready for the picture. (When the timer is started,

the phone will begin to beep and the timer numbers

turn red when there is only three seconds left.)

To cancel the self-timer after it has started:

ᮣ

Press

Using the Zoom

This feature allows you to zoom in on an object when you

take a picture. Depending on your resolution settings, you

can adjust the zoom up to four levels.

To use the zoom:

1. From camera mode, press the navigation key left

or right.

2. Press

to take the picture. (The picture will

automatically be saved in the In Phone folder.)

Section 2I: Using the Built-in Camera

129

Selecting Camera Settings

To select your camera settings:

1. From camera mode, select Options (

)> Settings .

2. Select one of the following options and press

Ⅲ

Resolution to select a picture’s file size (High:

640x480, Med: 320x240, or Low: 224x168).

Quality to select the picture quality setting (Fine,

Normal, or Economy).

Shutter Sound to select a shutter sound (Shutter 1-6,

Say Cheese, or Off).

Auto Erase to select whether pictures remain in the

camera (Off), or are erased (On), after uploading

them.

Ⅲ

View Mode to select between Wide Screen or

Full Screen format.

Viewing Your Camera’s Status Area Display

Zoom Level

Menu Bar

Images Saved/

Remaining

Display

Image

Camera

Options

Capture

130

Section 2I: Using the Bui lt-in Camera

Storing Pictures

Your phone’s picture storage area is called My Albums. There

are two types of folders that can be used separately according

to your needs:

ⅷ

In Phone

ⅷ

Online Albums

In Phone Folder

Once a picture is taken, it is automatically saved to the

In Camera folder. From the In Phone folder, you can view all

the pictures you have taken, store selected images in your

phone, send pictures to the Sprint PCS Picture Mail Web site

(www.sprint.com/picturemail), delete images, and access

additional picture options.

To review your stored pictures in the In Camera folder:

1. Select Menu > Pictures > My Pictures > In Camera.

2. Use your navigation key to view and scroll through the

pictures.

Section 2I: Using the Built-in Camera

131

In Phone Folder Options

When you are viewing the In Phone folder, press Options (

)

to display the following options:

ⅷ

Upload to upload pictures from the In Phone folder to the

Sprint PCS Picture Mail Web site (www.sprint.com/

picturemail). Depending on your settings, you may be

prompted to accept a Sprint PCS Vision connection.

If this is the first time you have accessed the Sprint PCS

Picture Mail account, you will be prompted to create

your Sprint PCS Picture Mail password. See “Creating Your

Sprint PCS Picture Mail Password” on page 127.

Note:

ⅷ

Assign to assign the current image as a Picture ID, Screen

Saver, or Incoming Call.

Save To Phone to save images from the In Camera folder

into the phone memory for use in assigning images to

contacts, screen savers, etc.

ⅷ

Edit Caption to edit the title associated with the image.

Erase to erase the image or selected images.

Picture Info to display the list of albums saved in your

phone.

ⅷ

Camera Mode to switch back to the camera mode.

Expand to enlarge the image so that it displays on the

entire screen.

ⅷ

Postcard to save handwritten text across the original

image.

132

Section 2I: Using the Bui lt-in Camera

Sending Sprint PCS Picture Mail

Once you’ve taken a picture, you can use the messaging

capabilities of your phone to instantly share your picture with

family and friends. You can send a picture to up to 10 people

at a time using their email addresses or their wireless phone

numbers.

Sending Pictures From the In Phone Folder

To send pictures from the In Phone folder:

1. Press Menu > Pictures > My Pictures > In Camera.

2. Highlight a picture you wish to send and press

. (The

check box on the upper left corner will be marked. You

can select multiple pictures.)

3. Select Send Msg (

4. Select Phone #, Email, Contacts, or Other SVC. and

press

The first time you send Sprint PCS Picture Mail, you will be

prompted to establish a Sprint PCS Picture Mail Web site

account and password. (See “Creating Your Sprint PCS Picture

Mail Password” on page 127.)

Note:

5. Select a contact, or enter a wireless phone number or an

email address using the keypad, and select OK ( ).

6. Enter additional recipients or select Next (

) to

continue.

Section 2I: Using the Built-in Camera

133

7. If you wish to include a subject, scroll to Subject and

select Add ( ). Enter your subject using the keypad

and select Save ( ) to save and exit.

8. If you wish to include a text message, scroll to Text and

select Add ( ). Enter your message using your keypad

(or press Options [ ] to select from Preset Msg or

Recent Msg) and choose Select (

) to save and exit.

(See “Entering T e xt” on page 42.)

9. If you wish to include an audio message with the

picture, highlight the box next to Audio and select

Record (

). Press

to start recording. (Maximum

recording time is 10 seconds.)

10. Confirm the recipients, message, audio message, and

picture.

Ⅲ

To change a recipient, highlight the recipient, press

the appropriate softkey, and follow the instructions

in step 5 to select or edit the recipient.

Ⅲ

To change the text message, scroll to Text and press

the appropriate softkey.

To change the voice memo, highlight the box next to

Audio and press the appropriate softkey.

To change the attached picture(s), select the

thumbnail picture, press the right softkey and

press Next (

11. Press

to send the picture.

134

Section 2I: Using the Bui lt-in Camera

Sending Pictures From Messaging

You can also send Sprint PCS Picture Mail from your phone’s

Messaging menu.

To send pictures from the Messaging menu:

1. Select Menu > Messaging > Send Message > Picture Mail >

In Camera.

2. Highlight a picture you wish to send and press

. (The

check box on the upper left corner will be marked. You

can select multiple pictures.)

3. Select Next (

4. Select a contact, or enter a wireless phone number or

enter an email address using the keypad, and

select OK (

5. Enter additional recipients or select Next (

) to

continue.

6. Select Send (

) to continue.

Section 2I: Using the Built-in Camera

135

To take and send a new picture from Messaging, select New

Picture during step 1 above, take the new picture, press Next

(right softkey), and follow steps 5-11 in “Sending Pictures

From the In Phone Folder” on page 133.

Tip:

7. Follow steps 7-11 in “Sending Pictures From the In

Phone Folder” on page 133.

Managing Sprint PCS Picture Mail

Using the Sprint PCS Picture Mail Web Site

Once you have uploaded pictures from your phone to your

online Sprint PCS Picture Mail account at www.sprint.com/

picturemail (see “In Phone Folder Options” on page 132), you

can use your personal computer to manage your pictures.

From the Sprint PCS Picture Mail Web site (www.sprint.com/

picturemail) you can share pictures, edit album titles, add

captions, and organize images. You can even send your

pictures to be printed at participating retail locations.

You will also have access to picture management tools to

improve and customize your pictures. You'll be able to

lighten, darken, crop, add antique effects, add comic bubbles

and cartoon effects, and use other features to transform your

pictures.

To access the Sprint PCS Picture Mail Web site:

1. From your computer’s Internet connection, go to

www.sprint.com/picturemail.

2. Enter your wireless phone number and Sprint PCS

Picture Mail password to register. (See “Creating Your

Sprint PCS Picture Mail Password” on page 127.)

136

Section 2I: Using the Bui lt-in Camera

Managing Online Pictures From Your Phone

You can use your phone to manage, edit, or share pictures you

have uploaded to the Sprint PCS Picture Mail Web site at

www.sprint.com/picturemail. (See “In Phone Folder Options” on

page 132 for information about uploading.)

To view your online pictures from your phone:

1. Select Menu > Pictures > Online Albums.

2. Highlight View Albums and press

. (Depending on

your settings, you may be prompted to accept a Sprint

PCS Vision connection).

3. The Uploads folder and your albums appear. Highlight

an album title and press

to display the album.

(Thumbnail pictures, up to four per screen, are

displayed.)

To expand a selected picture from thumbnail to full-screen,

select Expand (left softkey).

Tip:

4. Use your navigation key to select a picture.

5. Press Options (

) to display your online picture

options.

Section 2I: Using the Built-in Camera

137

Uploading Pictures

To upload pictures:

1. Press Menu > Pictures > My Pictures > In Camera

(Thumbnail pictures will be displayed.)

2. Select the picture(s) you wish to upload and press

Options (

3. Select Upload and choose Upload Selection/Upload All

and press

4. Select My Uploads or Other Album and press

5. Highlight an album and press

to start uploading.

Downloading Your Online Pictures

From your online Sprint PCS Picture Mail albums display at

www.sprint.com/picturemail, you can select pictures to download

to your phone’s Saved to Phone folder.

To download pictures from the Sprint PCS Picture Mail

Web site:

1. From the online pictures display, select the picture you

wish to download and press Options (

). (See

“Managing Online Pictures From Your Phone” on page

137.)

2. Highlight Assign and press

3. Select one of the following options and press

Ⅲ

Picture ID to download and assign the selected

picture as a Picture ID.

Screen Saver to download and assign the selected

picture as a screen saver.

138

Section 2I: Using the Bui lt-in Camera

Ⅲ

Incoming Call to download a picture and assign to

incoming calls with or without caller ID.

Accessing Online Picture Options From Your Phone

1. Select a picture from your online Picture Mail. (See

“Managing Online Pictures From Your Phone” on page

137.)

2. Select Options (

3. To select an option, highlight it and press

Copy/Move to copy or move pictures to a selected

) to display options.

Ⅲ

album:

ࡗ

Copy Selection to copy the selected picture to the

album.

ࡗ

Copy All to copy all pictures in the current album

(or Inbox) to the target album.

ࡗ

Move Selection to move the selected picture to the

album.

ࡗ

Move All to move all pictures in the current album

(or Inbox) to the target album.

Ⅲ

Save to Phone to copy the selected picture to the

Saved to Phone folder. (See “In Phone Folder” on

page 131.)

Ⅲ

Edit Caption to modify the caption name of the

image.

Erase to select Erase This or Erase All to erase a single

picture or all pictures saved in the current album (or

Inbox).

Ⅲ

Picture Info to display information about the image.

Expand (left softkey) to expand the selected picture.

Section 2I: Using the Built-in Camera

139

To access your online Albums options from your phone:

1. Display the album list in the Online Sprint PCS Picture

Mail menu. (See “Managing Online Pictures From Your

Phone” on page 137.)

2. Use your navigation key to select an album (or Inbox).

3. Select Options (

) to display options.

4. To select an option, highlight it and press

Ⅲ

New Album to create a new album. Enter a new

album name and select Save ( ).

Album Info to display the details about the album.

Order Prints

This menu allows you to order prints from third party vendors

by uploading images saved on your phone. Images saved at

the highest quality and resolution settings produce the best

prints.

To access order prints:

1. Select Menu > Pictures > Order Prints.

2. Select Print by Mail and press

3. Follow the onscreen instructions.

140

Section 2I: Using the Bui lt-in Camera

Settings and Info

This menu allows you to configure where pictures are saved,

view your account information, or set the view between

portrait or landscape mode.

To access the settings and info menu:

1. Select Menu > Pictures > Settings and Info.

2. Select one of the following options and press

Ⅲ

Account Info to display your current Sprint account

settings via an online connection.

Ⅲ

View Mode to select a picture view mode of portrait

or landscape when viewing pictures in the In Phone

folder.

Section 2I: Using the Built-in Camera

141

142

Section 2J

Using Sprint PCS Ready Link

In This Section

ࡗ

Getting Started With Sprint PCS Ready Link

Making and Receiving a Sprint PCS Ready Link Call

Adding and Editing Ready Link Contacts

Erasing Ready Link List Entries

Updating Your Sprint PCS Ready Link Lists

Managing Sprint PCS Ready Link Settings

Your phone gives you the ability to quickly connect with other

Sprint PCS Ready Link users for “walkie-talkie–style”

communication from anywhere, to anywhere, on the Nationwide

Sprint PCS Network.

This section explains the features and options of your phone

and service.

Section 2J: Using Sprint PCS Ready Link

143

Getting Started With Sprint PCS Ready Link

Sprint PCS Ready Link allows you to enjoy quick, two-way,

“walkie-talkie–style” communication with your friends,

family, and coworkers. You can make one-to-one or

one-to-many calls (up to five others on the same call) to

any other Sprint PCS Ready Link user, anywhere on the

Nationwide Sprint PCS Network. You can make and receive

Sprint PCS Ready Link calls when your phone displays the

Ready Link icon.

Setting Sprint PCS Ready Link Mode

To enable or disable Sprint PCS Ready Link mode:

1. Select Menu > Settings > Ready Link > Enable/Disable >

Enable.

Ⅲ

Enable: Lets you make or receive Sprint PCS Ready

Link calls any time your phone is not in use.

Ⅲ

Disable: Disables your phone's Sprint PCS Ready Link

service; you will not be able to make or receive

Sprint PCS Ready Link calls or access your Ready Link

contacts.

If you haven’t signed up for the Sprint PCS Ready Link service

and Sprint PCS Ready Link mode is set to Disable, or the Sprint

PCS Ready Link service is locked, you can use the Ready Link

button in standby mode.

Tip:

144

Section 2J: Using Sprint PCS Ready Link

Preparing Your Phone for Sprint PCS

Ready Link Service

Every time you turn on your phone, it will identify itself and

make itself available to the Ready Link network.

ᮣ

When you turn on your phone in an area where

Sprint PCS Ready Link service is available, it will display

“Preparing...Please wait.” (When the Ready Link icon

appears on the display, your phone is ready to make and

receive Sprint PCS Ready Link calls.)

Ready Link Call Alerts

There are several ways your phone alerts you during

Sprint PCS Ready Link calls.

When you make or receive a Sprint PCS Ready Link call:

ⅷ

The phone sounds (depending on the Ringer Type and

Ringer Volume setting).

ⅷ

The backlight illuminates.

The screen displays a Sprint PCS Ready Link call message.

The other party's Sprint PCS Ready Link number and name

(if available) are displayed.

ⅷ

The screen displays who has the floor.

Main LCD Display during a Ready Link Call

Section 2J: Using Sprint PCS Ready Link

145

Making and Receiving a Sprint PCS

Ready Link Call

Displaying the Sprint PCS Ready Link List

ᮣ

From standby mode, press R-Link (

) or the Ready Link

) to access the

button on the side of your phone (

Sprint PCS Ready Link List.

The first time you access the list, the Sprint PCS Ready Link

Help message will appear. Press Yes (left softkey) and Next

(left softkey) to read a brief introduction to Sprint PCS

Ready Link.

Tip:

146

Section 2J: Using Sprint PCS Ready Link

Selecting a Contacts List

When your phone displays a Sprint PCS Ready Link List, the

left softkey is labeled Go to. To switch to another contact list,

press Go to (

press

), highlight your desired list, and

ⅷ

Enter R-Link# to enter a ready link number.

ⅷ

Company List/Company Grps.contain your company Ready

Link contact names and numbers, separately or in groups.

You can create and edit your own company List. Your

phone can store a total of 200 entries. (You may include

up to five contacts per group.)

ⅷ

Personal List/Personal Grps. contain your personal Ready

Link contact names and numbers, separately or in groups.

You can create and edit your own Personal List. Your

phone can store a total of 200 entries. (You may include

up to five contacts per group.)

ⅷ

Missed shows the last 10 Sprint PCS Ready Link calls you missed.

Outgoing shows the last 10 different Sprint PCS Ready Link

calls you placed.

ⅷ

Incoming shows the last 10 different Sprint PCS Ready Link

calls you accepted.

The icon next to the group name indicates a group.

Note:

Making a Sprint PCS Ready Link Call

(One-to-One Call)

You can place a one-to-one Sprint PCS Ready Link call by

entering a Sprint PCS Ready Link number or by selecting a

contact from the Sprint PCS Ready Link List.

Section 2J: Using Sprint PCS Ready Link

147

To place a Sprint PCS Ready Link call by selecting a contact:

1. Press R-Link or press

2. Select Go To (

), and then select the list from which

you want to place a call (Enter R-Link#, Company Groups

[if registered], Personal List, Personal Groups, Missed Calls,

Outgoing Calls, or Incoming Calls) and press

You can also select Enter R-Link# from the Go to option to enter

a Sprint PCS Ready Link number directly. (See page 150 for

details.)

Tip:

3. Scroll to the contact you want to call, and press and hold

to place the call and get the floor. (You will see

“R-Link calling...” and “Connecting...” followed by “You

have floor.” You can now begin speaking.)

- or -

Scroll to the contact you want to call and press and release

to place the call. (The call will connect as described

above, but “Floor is open.” will appear on the screen and

either you or your contact may press and hold

the floor and speak.

to take

During a Sprint PCS Ready Link call, the “floor” is the right to

speak. When you see “Floor is open,” the first person to press

the Ready Link/Memo button can speak (while holding the

button). Only the person who has the floor can speak. The

phone beeps if you press the Ready Link button when another

contact has the floor.

Note:

4. Continue holding

finished speaking, release

as you speak. (When you have

to allow the other

contact to speak. When the other party takes the floor,

148

Section 2J: Using Sprint PCS Ready Link

you will see the speaker’s name and phone number and

the text “has floor.”)

5. When you are finished, press

When neither party has the floor during a Sprint PCS Ready

Link call, “Floor is open” appears on the display. If no one takes

the floor for 20 seconds, the Sprint PCS Ready Link call ends

automatically.

Note:

If you press Talk or Speaker during step 3 above, you can make

a standard voice call.

Tip:

Making a Sprint PCS Ready Link Call (Group Call)

You can make a Sprint PCS Ready Link call to all members in a

Group entry that you have in your Sprint PCS Ready Link List.

You can communicate with up to five members at a time.

To place a Sprint PCS Ready Link Group call:

1. Press R-Link or press

2. Select Go To (

you want to make a call (Personal Groups, Outgoing Calls,

Incoming Calls, or Missed Calls) and press

) and then select the list from which

3. Scroll to the group you want to call, and press and hold

to place the call and take the floor. (You will see

“R-Link calling...” and “Connecting...” followed by “You

have floor.” Continue with the Sprint PCS Ready Link call

as described on the previous page.)

Ⅲ

To make a Sprint PCS Ready Link call to a group

member, select your desired group, highlight the

desired group member, and press and hold

Section 2J: Using Sprint PCS Ready Link

149

Ⅲ

If one of the group members takes the floor, you will

see the member's name and Sprint PCS Ready Link

number on the display.

4. When the call is finished, press

The phone beeps if you press the Ready Link button when

another contact has the floor.

Tip:

You can also make a Group Call after checking the group

member. Press Menu/OK to display group members,

highlight <Call Group> and press and hold the Ready Link

button during step 3 above.

To redial your last Sprint PCS Ready Link call, highlight

Redial and press and hold the Ready Link button from the

Sprint PCS Ready Link List.

Making a Sprint PCS Ready Link Call by Entering a

Number

To place a Sprint PCS Ready Link call by entering a number:

1. From standby mode, enter the Sprint PCS Ready Link

number you want to dial.

2. Press

to place the Sprint PCS Ready Link call.

Continue holding

Ⅲ

The contact's name appears on the display if there is

a matched number in your Sprint PCS Ready Link

List.

3. Continue with the Sprint PCS Ready Link call while

pressing and holding

4. When the call is finished, press

- or -

150

Section 2J: Using Sprint PCS Ready Link

1. Press R-Link or press

2. Select Go To ( ) > Enter R-Link# and press

3. Enter the Ready Link number you want to dial.

4. Follow steps 2-4 above.

Sprint PCS Ready Link numbers must contain 10 digits (area

code + phone number). Your Sprint PCS Ready Link number is

the same as your phone number.

Note:

Missed Call Notification for Sprint PCS

Ready Link Calls

When an incoming Sprint PCS Ready Link call is not answered,

the Missed Call Notification is displayed onscreen.

To call the last Missed Sprint PCS Ready Link call:

ᮣ

Simply press and hold

while the Missed Call

Notification is displayed. (Continue with the Sprint PCS

Ready Link call as described previously.)

If you have two or more missed calls, the call log list will

appear. Different icons will be displayed when you have

different types of notifications.

Tip:

To erase the Missed Call log:

ᮣ

Press Dismiss (

If you press End before checking your notification, Events

(right softkey) appears in standby mode. Press Events (right

softkey) to display the notification list.

Tip:

Section 2J: Using Sprint PCS Ready Link

151

When you display Missed Call entries, you will see an icon

next to the name. The icon will remain until you make or

receive a Sprint PCS Ready Link call to or from the entry.

Another icon appears next to the new missed call entry.

Note:

Receiving a Sprint PCS Ready Link Call

To receive a Sprint PCS Ready Link call:

1. Make sure your phone's Sprint PCS Ready Link mode is

enabled (See “Setting Sprint PCS Ready Link Mode” on

page 144).

2. When you receive a Sprint PCS Ready Link call from a

contact, “R-Link Call,” the contact's name, and the Sprint

PCS Ready Link number appear on the display. (You do

not need to take any action to answer the call.)

Ⅲ

When you receive a group call, “Group Call,” the

group member's name, and the Sprint PCS Ready

Link number appear.

3. If the person placing the call has kept the floor (held the

Ready Link/Memo button), you will see the contact’s

name and Sprint PCS Ready Link number along with

“has floor,” and you will hear the caller speaking.

4. When the caller finishes speaking and releases

you will see “Floor is open.” on the display screen. Press

and hold

to take the floor and reply to the caller.

(You will see “You have floor” and hear a tone

confirming that you may speak.)

5. When the conversation is finished, press

You can also receive a Sprint PCS Ready Link call with the flip

closed. Press and hold the Ready Link button to take the floor

when the floor is open.

Tip:

152

Section 2J: Using Sprint PCS Ready Link

You can change the volume and the speaker setting while a

Sprint PCS Ready Link call is activated. Volume: Adjust the

voice volume by using the Side Volume key or by pressing the

navigation key up or down except when you are pressing and

holding the Ready Link button. Speaker: Switch the speaker on

or off by pressing the Speaker button.

Note:

Sprint PCS Ready Link Options

When you use Sprint PCS Ready Link, several user options are

available by pressing Options (

highlight it and press

). To select an option,

ⅷ

Copy to Contacts to copy a contact to the Personal List.

Copy Group appears when you highlight a group. (This

option doesn't appear if the entry is already in the

Personal List or when you select Personal List/Personal

Groups.)

ⅷ

Edit to edit a Sprint PCS Ready Link number and/or name.

See page 158.

Erase to erase a contact. Erase Group appears when you

highlight a group.

New Contact to add a new contact. Add Group appears

when you highlight a group list. See page 156 for details.

Erase R-Link List to erase entries saved in the Sprint PCS

Ready Link List (except Company List/Company Groups).

ⅷ

Send VoiceSMS to send an SMS voice message.

Help to see the Sprint PCS Ready Link instruction page.

Section 2J: Using Sprint PCS Ready Link

153

Adding and Editing Ready Link Contacts

Copying an Entry to Your Personal List or Personal

Group List

You can copy an entry to your Personal Lists from several

different sources. If the selected entry is already stored in the

Personal Lists, the “copy” option does not appear.

To copy an entry from the Sprint PCS Ready Link List:

1. Press R-Link or press

2. Select Go To ( ), and then select the list from which

you want to copy an entry (Missed Calls, Outgoing Calls,

or Incoming Calls) and press

3. Select the entry you want to copy (or scroll to highlight

the Redial entry at the top of your screen) and press

Options (

). To select an option, highlight it and

press

Ⅲ

Copy to copy the contact to the

Personal List.

4. Select Yes to copy and save the entry to your

Personal List.

Your Company Lists can be set up and edited only by an

administrator on the Sprint PCS Ready Link server. You cannot

add or edit contacts/groups to your Company Lists.

Note:

154

Section 2J: Using Sprint PCS Ready Link

Saving a Sprint PCS Ready Link Number

When you have finished a Sprint PCS Ready Link call, you will

see the Sprint PCS Ready Link number and the text “R-Link call

ended.” on the display. You can save a Sprint PCS Ready Link

number from the ending display to your Personal Lists.

To save the number:

ᮣ

From the end display, press Options (

If the entry has no name, you are prompted to enter

a name.

)> Save.

Ⅲ

If the number is already stored in the Personal List or Personal

Groups, the “Save” softkey does not appear.

Note:

Finding an Entry in the Sprint PCS Ready Link List

You can find an entry by entering a few letters.

To find a Sprint PCS Ready Link entry:

1. Press R-Link or press

2. Select Go To (

), and then select a list (Personal List or

Personal Groups).

3. Enter the first letter or the first few letters of the name.

Ⅲ

The display shows the list beginning with the

letter(s) you entered.

4. Scroll through the list and press

to select the

desired entry.

Section 2J: Using Sprint PCS Ready Link

155

Adding a New Contact to Your Personal List

You can store a total of 200 entries in the Personal Lists.

To add a new Sprint PCS Ready Link contact:

1. Press R-Link or press

2. Select Go To ( ) > Personal List and press

3. Select <New Contact> and press

- or -

Select a contact, press Options (

), and then highlight

New Contact and press

4. Enter a name for the new contact and press

. (This is

the name you will see when calling or receiving a call

from the contact.)

5. Select R-Link Number, enter the contact's 10-digit Sprint

PCS Ready Link number (the contact's wireless phone

number) and press

6. Press Done (

) to save the new contact to your

Personal List.

Tip: You are not allowed to use the following symbols during

step 4: @ : ; / * } {

Tip:

156

Section 2J: Using Sprint PCS Ready Link

Adding a New Group to Your Personal Group List

You can add new groups to the Personal Group List. Each

group can include up to five members. You can enter a group

member directly or select the member from the Company List

or Personal List.

To add a new Sprint PCS Ready Link group entry:

1. Press R-Link or press

2. Select Go To ( ) > Personal Groups.

3. Select <New Group> and press

- or -

Select an entry, press Options (

), and then highlight

New Group and press

4. Enter a Group Name, press

, and press Next (

5. To add contacts to the group, press Add (

6. Highlight one item from the following and press

Ⅲ

New to add a new contact. See the previous page for

details.

From Company to add a contact from your Company

List (if applicable).

From Personal to add a contact from your Personal

List.

7. Scroll to the contacts you want to add and press

Pick ( ) to include the entries.

Section 2J: Using Sprint PCS Ready Link

157

8. Press Done (

) when you have finished selecting

) to update your

contacts, and then press Update (

Personal Group List with the new group entry.

You can also add members directly. From step 5 above,

highlight <Add Members> and press OK. Enter the new

members’s name and R-Link number and press Save (left

softkey) to save the entry.

Tip:

Editing a Contact in Your Personal List

To edit a Personal List contact:

1. Press R-Link or press

2. Select Go To (

3. Scroll to the entry you want to edit and press

Options ( ).

) > Personal List.

Ⅲ

Copy to Contacts to transfer the Ready Link entry to

your Contacts.

Ⅲ

Edit to edit the selected contact.

Erase to erase the selected contact.

New Contact to add a new contact.

Erase R-Link List to erase the Sprint PCS Ready Link

List. (See page 162.)

Ⅲ

Send VoiceSMS to send an SMS voice message.

Help to view the Sprint PCS Ready Link instruction

page.

4. Highlight Edit and press

5. Select the field you want to edit (Name or R-Link

Number) and press

158

Section 2J: Using Sprint PCS Ready Link

6. Edit the entry, press Done (

), and press Save (

) to

save your changes.

Editing a Group in Your Personal Group List

To edit a group name:

1. Press R-Link or press

2. Select Go To (

3. Scroll to the group entry you want to edit and press

Options ( ).

) > Personal Groups.

Ⅲ

Edit to edit the selected group.

Erase Group to erase the selected group.

New Group to add a new group.

Erase R-Link List to erase the Sprint PCS Ready Link

List. See page 161 for details.

Ⅲ

Help to view the Sprint PCS Ready Link instruction

page.

4. Highlight Edit and press

5. Edit the group name and press

then press Next ( ).

or Done (

), and

If you don’t need to edit the group name, press Next (left

softkey) during step 5 above and skip step 6.

Tip:

6. Press Done (

7. To edit a group member, scroll to the contact you want

to edit and press Options ( ).

) to save your changes.

Section 2J: Using Sprint PCS Ready Link

159

Ⅲ

Edit to edit a group member's name and phone

number.

Ⅲ

Erase to erase the group member.

Add New to add a new group member.

Add (Company) to add a new group member from

the Company List (if applicable).

Ⅲ

Add (Personal) to add a new group member from the

Personal List.

Details to display a group member's information.

8. Highlight Edit and press

9. Select the field you want to edit (Name or R-Link

Number) and press

10. Edit the entry, press Done (

), and press Save (

) to

save your changes.

11. Press Update (

) to update your Personal Group List.

160

Section 2J: Using Sprint PCS Ready Link

Erasing Ready Link List Entries

Erasing an Entry in Your Personal Lists

To erase a contact or a group:

1. From the Sprint PCS Ready Link List, select Go To (

and then select Personal List or Personal Groups and press

2. Scroll to the entry you want to erase and select Options

(

) > Erase.

Ⅲ

Erase Group appears when you select Personal

Groups.

3. Select Yes and press

To erase a group member:

1. From the Sprint PCS Ready Link List, select Go To (

) >

Personal Groups.

2. Scroll to the desired group and press

to display the

group members.

3. Select the contact you want to erase and select Options

) > Erase > Yes to update your Personal Group List.

(

Section 2J: Using Sprint PCS Ready Link

161

Erasing a Sprint PCS Ready Link List

You can erase all entries saved in the Sprint PCS Ready Link

List (except Company List/Company Groups.).

To erase a Sprint PCS Ready Link List:

1. From the Sprint PCS Ready Link List, select Options (

)

> Erase R-Link List.

2. Select the desired option and press

Ⅲ

Outgoing Calls to erase all outgoing Sprint PCS Ready

Link calls.

Incoming Calls to erase all incoming Sprint PCS Ready

Link calls.

Missed Calls to erase all missed Sprint PCS Ready Link

calls.

All Calls to erase all Sprint PCS Ready Link call history,

except redial.

All Personal Entries to erase all entries in Personal List

and Personal Grps. You are prompted to enter your

four-digit lock code.

3. Select Yes.

Redial numbers will not be erased.

Tip:

Updating Sprint PCS Ready Link Lists

Updating the Company List and Personal List

To update your Company List and Personal List manually through

the Sprint PCS Ready Link server:

ᮣ

Select Menu (

) > Settings > Ready Link > List Update.

162

Section 2J: Using Sprint PCS Ready Link

Managing Sprint PCS Ready Link Settings

Restarting the Ready Link Service

To restart the Sprint PCS Ready Link service:

ᮣ

Select Menu (

) > Settings > Ready Link >

Restart Ready Link.

Setting Ready Link Guard

This feature enables you to display a warning message when

you cannot receive Sprint PCS Ready Link calls. The warning

message will appear when you are launching a Web or Java

application or sending or uploading your pictures.

To set the Ready Link Guard:

1. Select Menu (

) > Settings > Ready Link >

R-Link Guard.

2. Select On. (Select Off to deactivate this feature.)

Setting Ringer Types for Sprint PCS Ready Link Calls

Your phone provides a variety of ringer types that allow you

to customize your ringer and volume settings.

To select a ringer type for Sprint PCS Ready Link calls:

1. Select Menu (

) > Settings > Ready Link > Sounds >

Tones.

2. Select the desired ringer type.

To hear the selected ringer, press Play (

Ⅲ

Section 2J: Using Sprint PCS Ready Link

163

Setting an Alert Notification for Sprint PCS

Ready Link Calls

Your phone can alert you with an audible tone when you

receive a Sprint PCS Ready Link call.

To set alerts for Sprint PCS Ready Link calls:

1. Select Menu (

) > Settings > Ready Link > Sounds >

Missed Call Alert.

2. Select Ready Link Calls or R-Link Missed.

3. Select Once, Repeat, or Continuous. (Select Off to

deactivate the alert.)

You can also set alerts using the Alert Notification menu. (See

“A lert Notification” on page 52.)

Tip:

Setting the Speakerphone for Sprint PCS

Ready Link Calls

You can set the speakerphone to on or off when Sprint PCS

Ready Link call is activated. By default, the speakerphone is

set to on.

To set the speakerphone to on or off:

1. Select Menu (

) > Settings > Ready Link >

Speakerphone.

2. Select On or Off.

If the phone’s ringer volume is set to Vibrate, Ringer Off, or

Silence All, the speakerphone turns off. Press Speaker to turn

the speakerphone mode on.

Note:

164

Section 2J: Using Sprint PCS Ready Link

Setting the Default View of the Sprint PCS

Ready Link List

You can select the default Sprint PCS Ready Link list when

Sprint PCS Ready Link is launched.

To select the default view of the Sprint PCS Ready Link List:

1. Select Menu (

) > Settings > Ready Link > Default View.

(The default setting is Personal List.)

2. Select the desired list.

Section 2J: Using Sprint PCS Ready Link

165

166

Section 2K

Using Bluetooth® Wireless Technology

In This Section

ࡗ

Turning Bluetooth On and Off

Using the Bluetooth Settings Menu

Bluetooth Profiles

Pairing Bluetooth Devices

Your phone features built-in Bluetooth wireless technology,

allowing you to share information more easily than ever before.

Bluetooth is a short-range communications technology that

allows you to connect wirelessly to a number of Bluetooth-

enabled devices, such as headsets, hands-free car kits,

handhelds, PCS and wireless phones. The Bluetooth

communication range is usually up to approximately 10

meters (30 feet).

This section details how to set up and make the most of your

phone’s Bluetooth capabilities.

Section 2K: Using Bluetooth® Wireless Technology

167

Turning Bluetooth On and Off

By default, your device’s Bluetooth functionality is

turned off. Turning Bluetooth on makes your device

“discoverable” by other in-range Bluetooth devices.

To turn Bluetooth on:

1. Select Menu > Settings > Bluetooth> Enable.

2. Press the navigation key up or down to select On and

press

to enable Bluetooth.

To turn Bluetooth off:

1. Select Menu > Settings > Bluetooth> Enable.

2. Press the navigation key up or down to select Off and

press

to disable Bluetooth.

Bluetooth Status Indicators

The following icons show your Bluetooth connection status

at a glance:

–

Bluetooth is active.

Bluetooth is connected to a device or

transferring data.

168

Section 2K: Using Bluetooth® Wireless Technology

Using the Bluetooth Settings Menu

The Bluetooth Settings menu allows you to set up many of the

characteristics of your phone’s Bluetooth service, including:

ⅷ

Entering or changing the name your phone uses for

Bluetooth communication.

Setting your phone’s visibility (or “discoverability”) for

other Bluetooth devices.

Displaying your phone’s Bluetooth address.

To access the Bluetooth Settings menu:

1. Select Menu > Settings > Bluetooth.

2. Use the navigation key to select Enable, Visibility,

Device name, or Device Info, and press

Bluetooth Settings: My Bluetooth Name

The My Bluetooth Name section of the Bluetooth Settings

menu allows you to select a Bluetooth name for your phone.

Your phone’s Bluetooth name will appear to other in-range

Bluetooth devices, depending on your visibility settings.

To set a Bluetooth name for your phone:

1. Select Menu > Settings > Bluetooth > Device name.

2. Press and hold

3. Use your keypad to enter a new name and press Done

) to save and exit.

to clear the current name.

(

Section 2K: Using Bluetooth® Wireless Technology

169

Bluetooth Settings: Visibility

The Visibility section of the Bluetooth Settings menu allows

you to manage your phone’s availability to other Bluetooth

devices.

To configure your phone’s visibility (discoverability) to other

Bluetooth devices:

1. Select Menu > Settings > Bluetooth > Visibility.

2. Select your desired visibility setting and press

Ⅲ

Always visible to allow other Bluetooth devices to

detect and identify your phone.

Ⅲ

Visible for 3min to allow other devices three minutes

to detect your phone before changing your status to

hidden.

Ⅲ

Hidden to prevent other Bluetooth devices from

detecting and identifying your phone.

Any changes you make to your Bluetooth settings will be

saved when you exit the Bluetooth Settings menu. Any

setting changes will apply to all devices in the same category.

Note:

Bluetooth Settings: My Bluetooth Address

To display your phone’s Bluetooth address:

ᮣ

Select Menu > Settings > Bluetooth > Device Info.

170

Section 2K: Using Bluetooth® Wireless Technology

Bluetooth Profiles

All the Bluetooth settings you configure are stored in your

phone’s Bluetooth user profile. Different profiles can be used

for specific Bluetooth functions.

ⅷ

Headset Profile – Bluetooth technology connects the

phone to a wireless Bluetooth-enabled headset. When an

incoming call is received, the ringer can be heard through

the headset, instead of the phone. The call can then be

received by pushing a button. Increase or decrease the

volume by using the headset.

ⅷ

Hands-Free Profile – Bluetooth technology connects the

phone to a wireless Bluetooth-enabled car kit. Incoming

calls ring to the hands-free headset or device. Calls can be

received by pressing a button on the headset or device.

For dialing, four functions are supported: recent call dial,

voice dial, speed dial, and number dial. Increase or

decrease the volume by using the headset.

ⅷ

DUN: Dial-Up Network Profile – Bluetooth technology

functions as a wireless data cable, connecting a PC or PDA

to a network through your phone.

OPP: Object Push Profile – is based on the Generic Object

Exchange (OBEX) profile which uses predefined object

formats. The object format is vCard.

Section 2K: Using Bluetooth® Wireless Technology

171

Pairing Bluetooth Devices

Paired Devices

The Bluetooth pairing process allows you to establish trusted

connections between your phone and another Bluetooth

device. When devices are paired, a passkey is shared between

devices, allowing for fast, secure connections while bypassing

the discovery and authentication process.

To pair your phone with another Bluetooth device:

1. Select Menu > Tools> Bluetooth.

2. Press Add new (

), highlight Search, and press

(Your phone will display a list of discovered in-range

Bluetooth devices.)

3. Select the device you wish to pair with and press

for

Add to List.

4. Enter the PIN (passkey) and press

The passkey can be any combination of up to 16 numbers.

Note:

5. Connection Successful will be displayed if the device is

connected properly. Enter a new name for the device or

press

for Done to keep the default name.

172

Section 2K: Using Bluetooth® Wireless Technology

Waiting for Pairing

If you are going to be using a Dial-Up Network (DUN) profile

to pair with a PC or PDA, you will need to allow the other

device to initiate pairing with your phone.

To allow your phone to be paired with another Bluetooth device:

1. Select Menu > Tools> Bluetooth > Add New >

Wait for request.

2. The visibility pop-up screen is displayed.

3. Follow the onscreen prompts to enter your passkey and

press

Section 2K: Using Bluetooth® Wireless Technology

173

174

Section 3

Sprint PCS Service Features

176

Section 3A

Sprint PCS Service Features:

The Basics

In This Section

ࡗ

Using Voicemail

Using SMS Text Messaging

Using SMS Voice Messaging

Using Caller ID

Responding to Call Waiting

Making a Three-Way Call

Using Call Forwarding

Now that you’ve mastered your phone’s fundamentals,

it’s time to explore the calling features that enhance your

Sprint PCS Service. This section outlines your basic Sprint PCS

Service features.

Section 3A: Sp rint PCS Service Features: The Basics

177

Using Voicemail

Setting Up Your Voicemail

All unanswered calls to your phone are automatically

transferred to your voicemail, even if your phone is in use or

turned off. Therefore, you will want to set up your voicemail

and personal greeting as soon as your phone is activated.

To set up your voicemail:

1. Press and hold

2. Follow the system prompts to:

Ⅲ

Create your passcode.

Record your name announcement.

Record your greeting.

Choose whether or not to activate One-Touch

Message Access (a feature that lets you access

messages simply by pressing and holding

bypassing the need for you to enter your passcode).

Voicemail Passcode

Note:

If you are concerned about unauthorized access to your

voicemail account, Sprint recommends you enable your

voicemail passcode.

178

Section 3A: Sprint PCS Service Features: The Basics

Voicemail Notification

There are several ways your phone alerts you to a new

message:

ⅷ

By displaying a message on the screen.

By sounding the assigned ringer type.

ⅷ

New Voicemail Message Alerts

When you receive a new voice message, your phone alerts

you and prompts you to call your voicemail.

To call your voicemail:

ᮣ

Press and hold

To display your Missed Log:

ᮣ

Press the navigation key up.

When you are roaming off the Nationwide Sprint PCS

Network, you may not receive notification of new voicemail

messages. It is recommended that you periodically check your

voicemail by dialing 1 + area code + your wireless phone

Note:

number. When your voicemail answers, press ( ) and enter

your passcode. You will be charged roaming rates when

accessing voicemail while roaming off the Nationwide

Sprint PCS Network.

Your phone accepts messages even when it is turned off.

However, you are notified of new messages only when your

phone is turned on and you are in a Sprint PCS Service Area.

Section 3A: Sp rint PCS Service Features: The Basics

179

Retrieving Your Voicemail Messages

You can review your messages directly from your phone or

from any other touch-tone phone. To dial from your phone,

you can either speed dial your voicemail or use the menu

keys.

Using One-Touch Message Access

ᮣ

Press and hold

box.)

. (Your phone will dial your voicemail

Using the Menu Keys on Your Phone to Access Your Messages

1. Select Menu > Messaging > Voicemail > Call Voicemail.

2. Press

to listen to your messages.

You are charged for airtime minutes when you are accessing

your voicemail from your phone.

Note:

Using a Phone Other Than Your Phone to Access Messages

1. Dial your wireless phone number.

2. When your voicemail answers, press

3. Enter your passcode.

When you call into voicemail, you first hear the header

information (date, time, and sender information) for the

message. To skip directly to the message, press 4 during the

header.

Tip:

180

Section 3A: Sprint PCS Service Features: The Basics

Voicemail Button Guide

Here’s a quick guide to your keypad functions while listening

to voicemail messages. For further details and menu options,

see “Voicemail Menu Key” on page 185.

Date/Time

Replay

Send Reply Advance

Rewind

Call Back

Help

Forward

Save

Erase

Cancel

Skip

Voicemail Options

Your phone offers several options for organizing and

accessing your voicemail.

Using Expert Mode

Using the Expert Mode setting for your personal voicemail

box helps you navigate through the voicemail system more

quickly by shortening the voice prompts you hear at each

level.

Section 3A: Sp rint PCS Service Features: The Basics

181

To turn Expert Mode on or off:

1. Press and hold

to access your voicemail. (If your

voicemail box contains any new or saved messages,

press

to access the main voicemail menu.)

2. Press

to change your Personal Options, following

the system prompts.

3. Press

for Expert Mode.

4. Press

to turn Expert Mode on or off.

Setting Up Group Distribution Lists

Create up to 20 separate group lists, each with up to 20

customers.

1. Press and hold

to access your voicemail. (If your

voicemail box contains any new or saved messages,

press

to access the main voicemail menu.)

2. Press

to change your Personal Options, following

the system prompts.

3. Press

for Administrative Options.

for Group Distribution Lists.

4. Press

5. Follow the voice prompts to create, edit, rename, or

delete group lists.

Sprint PCS Callback

Return a call after listening to a message without

disconnecting from voicemail.

ᮣ

Press

after listening to a message. (Once the call is

complete, you’re returned to the voicemail main menu.)

182

Section 3A: Sprint PCS Service Features: The Basics

Voicemail-to-Voicemail Message

Record and send a voice message to other Sprint PCS

Voicemail users.

1. From the main voicemail menu, press

to send a

message.

2. Follow the voice prompts to enter the phone number.

3. Follow the voice prompts to record and send your voice

message.

Voicemail-to-Voicemail Message Reply

Reply to a voice message received from any other Sprint PCS

Voicemail user.

1. After listening to a voice message, press

2. Follow the voice prompts to record and send your reply.

Voicemail-to-Voicemail Message Forwarding

Forward a voice message, except those marked “Private,” to

other Sprint PCS Voicemail users.

1. After listening to a message, press

and then

2. Follow the voice prompts to enter the phone number.

3. Follow the voice prompts to record your introduction

and forward the voice message.

Section 3A: Sp rint PCS Service Features: The Basics

183

Voicemail-to-Voicemail Receipt Request

Receive confirmation that your voice message has been

listened to when you send, forward, or reply to other

Sprint PCS users.

1. Listen to the message and press

to reply.

2. After the tone, record your message, press

to end

to indicate you are satisfied

recording and then

with the message you recorded.

To rerecord your message, press 3.

Note:

3. Press

4. Press

to mark receipt requested.

to send your voicemail message.

Extended Absence Greeting

When your phone is turned off or you are off the Nationwide

Sprint PCS Network for an extended period, this greeting can

be played instead of your normal personal greeting.

1. From the main voicemail menu, press

for Personal

Options.

2. Press

for greetings.

to record an Extended Absence Greeting.

3. Press

Clearing the Message Icon

Your phone may temporarily continue to display the message

icon after you have checked your voice and text messages.

To clear the icon from the display screen:

1. Select Menu > Messaging > Voicemail > Clear Envelope.

2. Select Yes or No and press

184

Section 3A: Sprint PCS Service Features: The Basics

Voicemail Menu Key

Following the prompts on the voicemail system, you can use

your keypad to navigate through the voicemail menu. The

following list outlines your phone’s voicemail menu structure.

Listen

Envelope Information

Advance 8 Seconds

Replay

Rewind

Forward Message

Erase

Callback

Save

Options

Send a Message

Personal Options

Notification Options

Phone Notification

Numeric Paging to a Phone

Return to Personal Options Menu

Administrative Options

Skip Passcode

Autoplay

Section 3A: Sp rint PCS Service Features: The Basics

185

Message Date & Time On/Off

Change Passcode

Group Distribution List

Return to Personal Options Menu

Greetings

Personal Greetings

Name Announcement

Extended Absence Greeting

Return to Personal Options Menu

Expert Mode (On/Off)

Place a Call

Disconnect

Using SMS Text Messaging

With SMS Text Messaging, you can use other people's

wireless phone numbers to send instant text messages from

your phone to their messaging-ready phones – and they can

send messages to you. When you receive a new message, it

will automatically be displayed on your phone’s screen.

In addition, SMS Text Messaging includes a variety of preset

messages, such as “I’m running late, I’m on my way,” that

make composing messages fast and easy. You can also

customize your own preset messages (up to 160 characters)

from your phone or at www.sprint.com.

186

Section 3A: Sprint PCS Service Features: The Basics

Composing SMS Text Messages

To compose an SMS Text message:

1. Select Menu > Messaging > Send Message > Text Message.

2. Select Contacts, Mobile #, or Email and press

3. Enter the number or email address, or select the

contact, and select Next (

). (You may include up to

10 recipients per message.)

4. Compose a message using one of the following

methods:

Ⅲ

To type a message, use your keypad to enter your

message. Use to select a character input mode.

To use a preset message, recent message, or an

emoticon, select Options ( ) and select Preset Msg,

Recent Msg, or Emoticons. Press the number on the

keypad that corresponds to the number next to the

message or emoticon.

5. Select Next (

6. Review your message and press Send (

also select the following additional messaging options

by pressing Options ( ):

Edit to edit the existing message before sending.

). You may

Ⅲ

Priority to set the message priority level

[Normal or Urgent].

Ⅲ

Call Back # to set the callback number.

Save to Drafts to save the message without sending.

Section 3A: Sp rint PCS Service Features: The Basics

187

Accessing SMS Text Messages

To read an SMS Text message:

ᮣ

When you receive a text message, it will automatically

appear on your phone’s main display screen. Use your

navigation key to scroll down and view the entire

message.

To reply to an SMS Text message:

1. While the message is open, select Reply (

2. Select Picture, Handwr. Msg, VoiceSMS, or Text and

press

3. Compose your reply or use the preset messages or icons.

Ⅲ

To type a message, use your keypad to enter your

message. Use to select a character input mode.

To use a preset message or an emoticon, select

Options ( ) and select Preset Msg, Recent Msg, or

Ⅲ

Emoticons. Press the number on the keypad that

corresponds to the number next to the message or

emoticon.

4. Select Next (

5. Review your message and press Send (

also select the following additional messaging options

by pressing Options ( ):

Edit to edit the existing message before sending.

). You may

Ⅲ

Priority to set the message priority level

[Normal or Urgent].

Ⅲ

Call Back # to set the callback number.

Save to Drafts to save the message without sending.

188

Section 3A: Sprint PCS Service Features: The Basics

Using Preset Messages

Preset messages make sending text messages to your friends,

family, and coworkers easier than ever.

To add or edit preset messages:

1. Select Menu > Messaging > Settings > Preset Messages.

2. Select Options (

) and press Add New.

3. Enter your new message or changes and press Done

(

). (See “Entering T ext” on page 42.)

You may also add or edit preset messages in the “My Online

Tools” area at www.sprint.com

Note:

Using SMS Voice Messaging

In addition to sending and receiving SMS Text messages, your

phone is enabled with SMS Voice Messaging. With SMS Voice

Messaging, you can quickly and easily send a voice message

to other SMS-enabled phones or working email addresses

without making a phone call. Just record a message and send

it directly to the recipient’s phone messaging inbox.

Activating SMS Voice Messaging

To use SMS Voice Messaging capabilities, you will first need

to register your phone. Once you have registered, incoming

SMS Voice messages will be automatically downloaded to

your phone.

To activate SMS Voice Messages:

1. When you turn on your phone, you will be prompted to

2. Select Yes. (When activation is complete, an activation

confirmation screen appears.)

Section 3A: Sp rint PCS Service Features: The Basics

189

If you select No during step 2 above, you will see an alert

message. If you select No after reading the message,

incoming SMS Voice messages will not be downloaded to

your phone.

Note:

Playing an SMS Voice Message

To play an SMS Voice message from the main menu:

1. Select Menu > Messaging > VoiceSMS.

2. Highlight the message you want to play and press

Composing SMS Voice Messages

To compose an SMS Voice message:

1. Select Menu > Messaging > Send Message > Voice SMS.

2. Select Mobile # or Email to enter a recipient’s wireless

phone number or email address directly.

3. Select Contacts.

4. Select your desired list and press

to select the

recipient.

5. Press Done (

) when you have finished selecting and

entering recipients.

6. Select Next (

) to continue to the next screen.

7. Start recording after the beep. (You can record up to

two minutes.)

8. To finish recording, press Done (

9. Press Send ( ) to send the voice message.

If this is the first time that you are sending an SMS message,

the “From Name” screen is displayed. Enter the default name

here for your messages.

Note:

190

Section 3A: Sprint PCS Service Features: The Basics

Accessing SMS Voice Messages

To play an SMS Voice message:

ᮣ

When you receive a voice message, a pop-up

notification will automatically appear on your phone’s

main display screen. Use your softkeys to view and play

the voice message.

To reply to an SMS Voice message:

1. From the VoiceSMS inbox, press Reply (

2. Record your reply and then press Send (

Using Caller ID

Caller ID allows people to identify a caller before answering

the phone by displaying the number of the incoming call. If

you do not want your number displayed when you make a

call, just follow these easy steps.

To block your phone number from being displayed for a specific

outgoing call:

1. Press

2. Enter the number you want to call.

3. Press

To permanently block your number, call Sprint Customer Service.

Section 3A: Sp rint PCS Service Features: The Basics

191

Responding to Call Waiting

When you’re on a call, Call Waiting alerts you to incoming

calls by sounding two beeps. Your phone’s screen informs you

that another call is coming in and displays the caller’s phone

number (if it is available).

To respond to an incoming call while you’re on a call:

ᮣ

Press

. (This puts the first caller on hold and answers

the second call.)

To switch back to the first caller:

ᮣ

Press

again.

For those calls where you don’t want to be interrupted, you

can temporarily disable Call Waiting by pressing *70 before

placing your call. Call Waiting is automatically reactivated

once you end the call.

Tip:

Making a Three-Way Call

With Three-Way Calling, you can talk to two people at the

same time. When using this feature, the normal airtime rates

will be charged for each of the two calls.

To make a Three-Way Call:

1. Enter a number you wish to call and press

2. Once you have established the connection, enter the

second number you wish to call and press

. (This

puts the first caller on hold and dials the second

number.)

3. When you’re connected to the second party, press

again to begin your three-way call.

192

Section 3A: Sprint PCS Service Features: The Basics

If one of the people you called hangs up during your call, you

and the remaining caller stay connected. If you initiated the

call and are the first to hang up, all other callers are

disconnected.

Call Waiting and Three-Way Calling are not available while

roaming off the Nationwide Sprint PCS Network.

Note:

Using Call Forwarding

Call Forwarding lets you forward all your incoming calls to

another phone number – even when your phone is turned off.

You can continue to make calls from your phone when Call

Forwarding is activated.

To activate Call Forwarding:

1. Press

2. Enter the area code and phone number to which your

future calls should be forwarded.

3. Press

. (You will see a message and hear a tone to

confirm the activation of Call Forwarding.)

To deactivate Call Forwarding:

1. Press

2. Press

. (You will see a message and hear a tone to

confirm the deactivation.)

You are charged a higher rate for calls you have forwarded.

Note:

Section 3A: Sp rint PCS Service Features: The Basics

193

194

Section 3B

Sprint PCS Vision

In This Section

ࡗ

Sprint PCS Vision Applications

Getting Started With Sprint PCS Vision

Accessing Messaging

Downloading Premium Services Content

Exploring the Web

Sprint PCS Vision FAQs

Sprint PCS Vision offers easy and amazing data services you

will really use. These features – including messaging, games,

downloadable ringers and screen savers, and portable Web

access – let you have fun, stay in touch, and stay informed no

matter where you go on the Nationwide Sprint PCS Network.

This section introduces these advanced services and walks

you through the necessary steps to start taking advantage of

Sprint PCS Vision Services.

Section 3B: Sprint PCS Vision

195

Sprint PCS Vision Applications

Here is a brief list of the applications available through your

phone. For more information, please see the Sprint PCS Vision

User Guide online at www.sprint.com.

Messaging — Send and receive emails and chat on your

phone.

Games — Play exciting games with full-color graphics,

sound, and vibration.

Ringers — Personalize your phone by downloading and

assigning different ringers to numbers in your Contacts.

Screen Savers — Download unique images to use as

screen savers – or make it easy to tell who’s calling by

assigning specific images to numbers in your Contacts.

Web — Experience full-color graphic versions of popular

Web sites from your phone.

Getting Started With Sprint PCS Vision

This section will help you learn the basics of using your

Sprint PCS Vision services, including managing your user

name, launching a Vision connection, and navigating the

Web with your phone.

Your User Name

When you buy a phone and sign up for service, you're

automatically assigned a user name, which is typically based

on your name and a number, followed by “@sprint.com.” (For

example, the third John Smith to sign up for Sprint PCS Vision

services might have [email protected] as his user name.)

196

Section 3B: Sprint PCS Vision

When you use Sprint PCS Vision services, your user name is

submitted to identify you to the Nationwide Sprint PCS

Network. The user name is also useful as an address for

Sprint PCS Mail, as a way to personalize Web services, and as

an online virtual identity.

Your user name will be automatically programmed into your

phone. You don't have to enter it.

Finding Your user name

If you aren't sure what your Sprint PCS Vision user name is,

you can easily find it online or on your phone.

To find your user name:

ⅷ

At www.sprint.com. Sign on to your account using your

phone number and password. To display your user name,

click the My Personal Information menu, and then click

Vision User Name.

ⅷ

On your phone. You can find your user name under the

Phone Info option in your phone's Settings menu (Menu >

Settings > Phone Info > Phone Number).

Launching a Sprint PCS Vision Connection

To launch a Sprint PCS Vision connection:

ᮣ

Select Menu > Web. (Your Sprint PCS Vision connection

will open and the Sprint PCS Vision home page will be

displayed.)

Section 3B: Sprint PCS Vision

197

The Sprint PCS Vision Home Page

You can also press the navigation key right to access

the Web.

Shortcut:

If Net Guard is enabled and displayed (see page 199), press

OK (right softkey) to continue and access the Web.

Note:

While connecting, the following will appear on the screen:

Vision Connecting....

If you had a previous Sprint PCS Vision connection, the last

page you visited may be displayed when you launch your

browser. When this occurs, you may not see the

“Connecting...” message when you launch the session.

Though the browser is open, you are not currently in an active

data session—that is, no data is being sent or received. As

soon as you navigate to another page, the active session will

open and you will see the “Connecting...” message.

198

Section 3B: Sprint PCS Vision

Net Guard

When you first connect to the Web, the Net Guard will appear

to confirm that you want to connect. This feature helps you

avoid accidental connections. You can disable the Net Guard

in the future by selecting Always Auto-Connect when the Net

Guard is displayed.

To change your Net Guard settings:

ᮣ

Select Menu >Settings > PCS Vision > Net Guard.

Ⅲ

On to activate the Net Guard.

Ⅲ

Off to deactivate the Net Guard.

When enabled, the Net Guard appears only once per session.

The Net Guard does not appear if the phone is merely

reconnecting due to a time-out.

Note:

Section 3B: Sprint PCS Vision

199

Sprint PCS Vision Connection Status and Indicators

Your phone's display lets you know the current status of your

Sprint PCS Vision connection through indicators which

appear at the top of the screen. The following symbols are

used:

Your Sprint PCS Vision connection is active (data is

being transferred); the transmit/receive symbol will

blink to indicate data transmission. Incoming voice

calls go directly to voicemail; outgoing voice calls

can be made, but the Sprint PCS Vision connection

will terminate.

Your Sprint PCS Vision connection is dormant. (No

data is being sent or received.) Though not

currently active, when dormant the phone can

restart an active connection quickly; voice calls can

be made and received.

Your phone is not currently able to access

Sprint PCS Vision service features.

If no indicator appears, your phone does not have a current

Sprint PCS Vision connection. To launch a connection, see

“Launching a Sprint PCS Vision Connection” on page 197.

200

Section 3B: Sprint PCS Vision

Navigating the Web

Navigating through menus and Web sites during a

Sprint PCS Vision session is easy once you've learned

a few basics. Here are some tips for getting around:

Softkeys

During a Sprint PCS Vision session, the bottom line of your

phone's display contains one or more softkeys. These keys are

shortcut controls for navigating around the Web, and they

correspond to the softkey buttons directly below the phone’s

display screen.

Depending on which Web sites you visit, the labels on the

softkeys may change to indicate their function.

Tip:

To use softkeys:

Press the desired softkey button. (If an additional

ᮣ

pop-up menu appears when you press the softkey

button, select the menu items using your keypad [if

they’re numbered] or by highlighting an option and

pressing

Scrolling

As with other parts of your phone's menu, you'll have to scroll

up and down to see everything on some Web sites.

To scroll line by line through Web sites:

ᮣ

Press the navigation key up and down.

To scroll page by page through Web sites:

ᮣ

Press the volume buttons on the side of the phone.

Section 3B: Sprint PCS Vision

201

Selecting

Once you've learned how to use softkeys and scroll, you can

start navigating the Web.

To select onscreen items:

ᮣ

Use the navigation key to highlight the desired item,

and then press the desired softkey button

(or press

You’ll find that the left softkey is used primarily for selecting

items. This softkey is often labeled “OK.”

Tip:

If the items on a page are numbered, you can use your keypad

(number keys) to select an item. (The tenth item in a

numbered list may be selected by pressing the 0 key on your

phone’s keypad, even though the number 0 doesn’t appear

on the screen.)

Links, which appear as underlined text, allow you to jump to

Web pages, select special functions, or even place phone calls.

To select links:

ᮣ

Highlight the link and press the appropriate softkey.

Going Back

To go back one page:

ᮣ

Press the

key on your phone.

The BACK key is also used for deleting text (like a BACKSPACE

key) when you are entering text.

Note:

202

Section 3B: Sprint PCS Vision

Going Home

To return to the Sprint PCS Vision home page from any other Web page:

ᮣ

Press and hold

– or –

Select Menu > Home.

Sprint PCS Messaging

Accessing Messaging

Now you can send and receive emails and text messages

and participate in Web-based chatrooms right from your

phone. Messaging allows you to stay connected to friends,

family, and coworkers 24 hours a day anywhere on the

Nationwide Sprint PCS Network.

Message Types

There are many types of text messaging available on your

phone. These include SMS Text Messaging, Sprint® Instant

Messaging, Email, and Chat.

(Sprint PCS Voicemail provides voicemail-to-mailbox

messaging. For information on using your phone’s voicemail

feature, see “Using Voicemail” on page 178.)

Section 3B: Sprint PCS Vision

203

Accessing Sprint PCS Mail

Sprint PCS Mail allows you to perform many of the typical

email functions from your phone that you can from your

personal computer. You can manage your Sprint PCS Mail

account from your phone or from your personal computer at

www.sprint.com.

To access Sprint PCS Mail from your phone:

1. Select Menu > Messaging > IM & Email. (If you’re a first-

time user, your phone will prompt you to set up your

Sprint PCS Mail account by establishing a user name

and password.)

2. Select the folder you wish to view, such as Inbox or

Compose.

For information and instructions about reading, replying to,

and composing Sprint PCS Mail, please see the Sprint PCS

Vision Guide at www.sprint.com.

Accessing Additional Email Providers

With Sprint PCS Vision, you can use popular email services

such as AOL® Mail, Yahoo!® Mail, MSN® Hotmail, and

EarthLink® to keep in touch, even while you’re on the go.

To access email providers from your phone:

1. From the Sprint PCS Vision home page, select Messaging

> Email.

2. Select an email provider, such as PCS Mail, AOL, MSN

Hotmail, Yahoo!, Earthlink, or others.

3. Use your keypad to enter the required sign-in

information for the selected provider, such as user

name, email address, and/or password, and select

displayed.)

204

Section 3B: Sprint PCS Vision

The information required to sign in will vary depending on

the email provider you are accessing.

Note:

4. Follow the onscreen instructions to read, reply to,

compose, send, and manage emails in your account.

Accessing Sprint Instant Messaging

Sprint PCS Vision also provides you with access to popular

instant messaging (IM) clients, including AOL® Instant

Messenger , MSN® Messenger, and Yahoo!® Messenger.

To access instant messaging clients from your phone:

1. From the Sprint PCS Vision home page, select Messaging

> Instant Messaging.

2. Select an IM provider, such as AOL Instant Messenger,

MSN Messenger, or Yahoo! Messenger.

3. Use your keypad to enter the required sign-in

information for the selected provider, such as user name

and/or password, and select Sign In. (Your IM screen for

the selected provider will be displayed.)

The information required to sign in will vary depending on

the instant messaging provider you are using.

Note:

4. Follow the onscreen instructions to read, reply to,

compose, and send messages, and to manage messages

in your IM account.

Section 3B: Sprint PCS Vision

205

Accessing Wireless Chatrooms

Sprint PCS Vision gives you the ability to join wireless

chatrooms from your phone, to send text messages and icons

to chatroom participants, or to launch a one-on-one (private)

chatroom.

To access a chatroom from the browser:

1. Select Messaging > Chat & Dating >Jumbuck.

2. Select Fast Flirting or Power Chat and select Link (

3. Select Link (

). (You will see a disclaimer for Wireless

Chat.)

4. Select Menu (

) > Agree to accept the disclaimer.

5. Use your keypad to enter a nickname and select

Done ( )> Go. (The chat menu will be displayed.)

6. Select a chatroom from the menu (for example,

“Friends” or “Singles”) and press Link (

) to enter.

7. Once in the chatroom, you may scroll through the

postings to read messages from other chatroom

participants and use your keypad to enter your own

messages.

For information about posting to chatrooms or setting up

one-on-one sessions, please see the Sprint PCS Vision Guide

at www.sprint.com.

Note:

Downloading Premium Services Content

With Sprint PCS Vision you have access to a dynamic variety

of Premium Service content, such as downloadable Games,

Ringers, Screen Savers, and other applications. (Additional

charges may apply.) The basic steps required to access and

download Premium Service content are outlined below.

206

Section 3B: Sprint PCS Vision

Accessing the Download Menus

To access the Sprint PCS Vision download menus:

1. Select Menu > Web.

2. From the Vision Home page select Downloads.

3. Select the type of file you wish to download (Call Tones,

Games, Ringers, Screen Savers, Applications, En Espanol,

Send A Gift, or My Content Manager) and press

4. Select Get New and press

. (For more information on

navigating the Web, see “Navigating the Web” on page

201.)

Selecting an Item to Download

You can search for available items to download in a number

of ways:

ⅷ

Featured displays a rotating selection of featured items.

ⅷ

Categories allows you to narrow your search to a general

category, such as College Logos for Screen Savers. (There

may be several pages of available content in a list. Select

Next 9 to view additional items.)

ⅷ

Search allows you to use your keypad to enter search

criteria to locate an item. You may enter an entire word or

title or perform a partial-word search. (For example,

entering “goo” returns “Good Ol’ Boy,” “The Good, the

Bad, and the Ugly,” and “Goofy - Club.”)

Downloading an Item

Once you’ve selected an item you wish to download,

highlight it and press

or press OK (

). You will see a

summary page for the item including its title, the vendor, the

download details, the file size, and the cost. Links allow you

Section 3B: Sprint PCS Vision

207

to view the License Details page, which outlines the price,

license type, and length of license for the download; and the

of Use and your responsibility for payment.

To download a selected item:

1. From the information page, select Buy. (The item will

download automatically. When the New Download

screen appears, the item has been successfully

downloaded to your phone.)

If you have not previously purchased an item, you will be

prompted to create your purchasing profile.

Note:

2. Select an option to continue:

Ⅲ

Select Use (left softkey) to assign the downloaded

item (or to start, in the case of a game or

application). Your Sprint PCS Vision session will end

and you will be redirected to the appropriate phone

menu screen.

Ⅲ

Select Shop (right softkey) to browse for other items

to download.

Press

to quit the browser and return to standby

mode.

208

Section 3B: Sprint PCS Vision

Using My Content Manager

Whether you purchase your Premium Services content from

your phone or from your online account management page at

www.sprint.com, all of your purchases are stored in My Content

Manager and may be downloaded to your phone from there.

My Content Manager is a storage area on the Nationwide

Sprint PCS Network that is assigned specifically to your

account. It allows you to store all of your Premium Service

downloadable files. The files remain in My Content Manager

until their license terms have expired – even after you have

downloaded the content to your phone. This provides you

with a convenient place to access information about your

downloaded files without having to store the information in

your phone’s memory.

To access My Content Manager:

ᮣ

From the Sprint PCS Vision home page, select

Downloads > My Content Manager.

To download purchased content from My Content Manager:

1. From the My Content Manager display (see above),

highlight the item you wish to download and

press

. (The information page for the selected item

will be displayed.)

2. Scroll to highlight Download and press

. (The item

will download automatically. When the New Download

screen appears, the item has been successfully

downloaded to your phone.)

3. Select an option to continue:

Ⅲ

Select Use (left softkey) to assign the downloaded

item (or to start, in the case of a game or

application). Your Sprint PCS Vision session will end

and you will be redirected to the appropriate phone

menu screen.

Section 3B: Sprint PCS Vision

209

Ⅲ

Select Shop (right softkey) to browse for other items

to download.

Press

to quit the browser and return to standby

mode.

For complete information and instructions on downloading

Games, Ringers, Screen Savers, and Applications, see the

Sprint PCS Vision Guide at www.sprint.com.

Web

Exploring the Web

With Web access you can browse full-color graphic versions

of your favorite Web sites, making it easier than ever to stay

informed while on the go. Follow sports scores and breaking

news and weather and shop on your phone anywhere on the

Nationwide Sprint PCS Network.

In addition to the features already covered in this section, the

Sprint PCS Vision home page offers access to these colorful,

graphically rich Web categories, including News, Weather,

Entertainment, Sports, Finance, Travel, Shopping, Tools, and

Business Links, as well as useful management options

including My Account and Search. Many sites are available

under more than one menu – choose the one that's most

convenient for you.

210

Section 3B: Sprint PCS Vision

Using the Browser Menu

Navigating the Web from your phone using the Sprint PCS

Vision home page is easy once you get the hang of it. For

details on how to navigate the Web, select menu items, and

more, see “Navigating the Web” on page 201.

Although the Sprint PCS Vision home page offers a broad and

convenient array of sites and services for you to browse, not

all sites are represented, and certain functions, such as going

directly to specific Web sites, are not available. For these and

other functions, you will need to use the browser menu. The

browser menu offers additional functionality to expand your

use of the Web on your phone.

Opening the Browser Menu

The browser menu may be opened anytime you have an

active Sprint PCS Vision session, from any page you are

viewing.

To open the browser menu:

ᮣ

Press the right softkey. (The browser menu will be

displayed in a drop-down list.)

Options available under the browser menu include:

ⅷ

Home. Returns the browser to the Sprint PCS Vision home

page.

ⅷ

Forward. Returns you to a previously viewed page (after

having used the

key).

ⅷ

Mark this Page. Allows you to bookmark the current site.

View Bookmarks. Allows you to access bookmarked sites,

and manage your bookmarks.

ⅷ

Search. Launches a Google search.

Send page to.... Allows you to send the current page as a

text message.

Section 3B: Sprint PCS Vision

211

ⅷ

Go to URL. Allows you to navigate directly to a Web site by

entering its URL (Web site address).

View History. Keeps a list of links to your most recently

visited sites. To navigate to a site, highlight it, press

and then select Connect.

ⅷ

Refresh this page. Reloads the current Web page.

More. Displays additional options:

Ⅲ

Show URL. Displays the URL (Web site address) of the

site you're currently viewing.

Restart Browser. Refreshes the current browser

session.

About Browser. Displays technical information about

the browser, its version, and the encryption version,

and provides links to Certificate Information for the

various components.

Ⅲ

Preferences. Displays all the preferences available for

the browser.

Creating a Bookmark

Bookmarks allow you to store the address of your favorite

Web sites for easy access at a later time.

To create a bookmark:

1. Go to the Web page you want to mark.

2. Press the right softkey to open the browser menu.

3. Select Mark this Page and press

to save the

bookmark.

4. Press

to exit the pop-up screen.

Bookmarking a page does not store the page’s contents, just

its address.

Note:

Some pages cannot be bookmarked. Whether a particular

Web page may be marked is controlled by its creator.

212

Section 3B: Sprint PCS Vision

Accessing a Bookmark

To access a bookmark:

1. Press the right softkey to open the browser menu.

2. Select View Bookmarks.

3. Scroll to highlight the bookmark you’d like to access and

press

to go to the Web site (or press the number

corresponding to the bookmark you wish to access).

Deleting a Bookmark

To delete a bookmark:

1. Press the right softkey to open the browser menu.

2. Select View Bookmarks.

3. Scroll to highlight the bookmark you’d like to delete and

press Menu (

4. Select Delete and press

5. Select OK ( ) to confirm and remove the bookmark.

6. Press to exit the pop-up screen.

Going to a Specific Web Site

To go to a particular Web site by entering a URL (Web site

address):

1. Press the right softkey to open the browser menu.

2. Select Go to URL.

3. Select the URL field and press

4. Use your keypad to enter the URL of the Web site you

wish to go to and press

Not all Web sites are viewable on your phone.

Note:

Section 3B: Sprint PCS Vision

213

Reloading a Web Page

To reload (refresh) a Web page:

1. Press

to open the browser menu.

2. Select Refresh this Page. (The browser will reload the

current Web page.)

Restarting the Web Browser

If the Web browser appears to be malfunctioning or stops

responding, you can usually fix the problem by simply

restarting the browser.

To restart the Web browser:

1. Press

to open the browser menu.

2. Select More > Restart Browser.

214

Section 3B: Sprint PCS Vision

Sprint PCS Vision FAQs

How will I know when my phone is ready for Sprint PCS Vision

service?

Your user name (for example, [email protected]) will be

displayed in the Phone Info. listing in your phone’s Settings

menu.

How do I sign in for the first time?

You are automatically signed in to access Sprint PCS Vision

services when you turn on your phone.

How do I know when my phone is connected to Sprint PCS Vision

services?

Your phone automatically connects when Sprint PCS Vision

service is used or an incoming message arrives. Your phone

will also display the

indicator.

Can I make calls and use Sprint PCS Vision services at the same

time?

You cannot use voice and Sprint PCS Vision services

simultaneously. If you receive a call while Sprint PCS Vision

service is active, the call will be forwarded to voicemail. You

can place an outgoing call anytime, but it will interrupt any

in-progress Sprint PCS Vision session.

When is my data connection active?

Your connection is active when data is being transferred.

Outgoing calls are allowed; incoming calls go directly to

voicemail. When active, the

phone’s display screen.

indicator flashes on your

Section 3B: Sprint PCS Vision

215

When is my data connection dormant?

If no data is received for 10 seconds, the connection goes

dormant. When the connection is dormant, voice calls are

allowed. (The connection may become active again quickly.) If

no data is received for an extended period of time, the

connection will terminate.

Can I sign out of data services?

You can sign out without turning off your phone; however,

you will not be able to browse the Web or use other

Sprint PCS Vision services. While signed out, you can still

place or receive phone calls, check voicemail, and use other

voice services. You may sign in again at any time. To sign out,

go to Settings > PCS Vision > Disable Vision in your phone’s

menu.

216

Section 3B: Sprint PCS Vision

Section 3C

Sprint PCS Voice Command

In This Section

ࡗ

Getting Started With Sprint PCS Voice Command

Creating Your Own Address Book

Making a Call With Sprint PCS Voice Command

Accessing Information Using Sprint PCS Voice Command

With Sprint PCS Voice Command, reaching your friends,

family, and coworkers has never been easier – especially

when you’re on the go. You can even listen to Web-based

information, such as news, weather, and sports. Your voice

does it all with Sprint PCS Voice Command.

This section outlines the Sprint PCS Voice Command service.

Section 3C: Sprint PCS Voice Command

217

Getting Started With Sprint PCS

Voice Command

With Sprint PCS Voice Command:

ⅷ

You can store all your contacts’ phone numbers, so you

can simply say the name of the person you want to call.

There’s no need to punch in a lot of numbers, memorize

voicemail passwords, or try to dial while you’re driving.

You can call anyone in your address book – even if you

don’t remember their phone number.

You don’t need to worry about losing your contacts or

address book. This advanced service is network-based, so

if you switch or happen to lose your phone, you won’t lose

your contacts or address book.

It’s Easy to Get Started

There are two easy ways to sign up for Sprint PCS Voice

Command:

ᮣ

Just dial

from your phone to contact Sprint

Customer Service and sign up.

ᮣ

There is a monthly charge for Sprint PCS Voice Command.

218

Section 3C: Sprint PCS Voice Command

Creating Your Own Address Book

You can program up to 299 names and numbers into your

personal address book. Each entry will support up to five

different numbers, with a maximum of 299 phone numbers

supported; and with the advanced technology of Sprint PCS

Voice Command, you can have instant access to all of them.

There are four ways to update your address book:

ⅷ

On the Web. Go to www.talk.sprintpcs.com and sign on with

your phone number and password to access a fully

functional Web-based address book to create and update

your contacts.

ⅷ

Use an Existing Address Book. Automatically merge address

books from desktop software applications with Sprint

Sync^SMServices for no additional charge. Simply click the

“Click to synchronize” button within your Sprint PCS Voice

Command personal address book at www.talk.sprintpcs.com.

ⅷ

Use Voice Recordings. Simply dial

and say, “Add

name.” You will then be asked to say the name and

number you want to add to your personal address book.

Your address book can store up to 20 voice-recorded

names at once.

ⅷ

Call Sprint 411. If you don’t have a computer or Internet

access handy, you can have Sprint 411 look up phone

numbers for you and automatically add them to your

address book. Just dial

and say “Call operator”

and we’ll add two names and all the numbers associated

with those names to your address book for our standard

directory assistance charge.

Section 3C: Sprint PCS Voice Command

219

Making a Call With Sprint PCS

Voice Command

To make a call with Sprint PCS Voice Command:

1. Press

and you’ll hear the “Ready” prompt.

2. After the “Ready” prompt, simply say, in a natural voice,

“Call” and the name of the person or the number you’d

like to call. (For example, you can say, “Call Jane Smith at

work,” “Call John Baker on the mobile phone,” “Call 555-

1234,” or “Call Bob Miller.”)

3. Your request will be repeated and you will be asked to

verify. Say “Yes” to call the number or person. (The

number will automatically be dialed.) Say “No” if you

wish to cancel.

Keep in mind that Sprint PCS Voice Command recognizes not

only your voice, but any voice, so that others can experience

the same convenience if they use your phone.

Tip:

For more helpful hints on Sprint PCS Voice Command,

including a list of recognized commands and an interactive

tutorial, visit www.talk.sprintpcs.com.

220

Section 3C: Sprint PCS Voice Command

Accessing Information Using

Sprint PCS Voice Command

To access information using Sprint PCS Voice Command:

1. Press

2. Say “Call the Web” and choose from a listing of

information categories like news, weather, and sports.

– or –

Simply say “Call news room,” “Call the weather,” “Call Sports

Central,” etc.

Sprint PCS Voice Command is not available while roaming off

the Nationwide Sprint PCS Network.

Note:

Section 3C: Sprint PCS Voice Command

221

222

Section 4

Safety and Warranty

Information

224

Section 4A

Important Safety Information

In This Section

ࡗ

General Precautions

Maintaining Safe Use of and Access to Y o ur Phone

Using Your Phone With a Hearing Aid Device

Caring for the Battery

Radiofrequency (RF) Energy

Owner’s Record

Phone Guide Proprietary Notice

This phone guide contains important operational and safety

information that will help you safely use your phone. Failure to

read and follow the information provided in this phone guide

may result in serious bodily injury, death, or property

damage.

Section 4A: Important Safety Information

225

General Precautions

There are several simple guidelines to operating your phone properly and

Speak directly into the mouthpiece.

ⅷ

Avoid exposing your phone and accessories to rain or liquid spills. If

your phone does get wet, immediately turn the power off and remove

the battery.

Although your phone is quite sturdy, it is a complex piece of

equipment and can be broken. Avoid dropping, hitting, bending, or

sitting on it.

Any changes or modifications to your phone not expressly approved in

this document could void your warranty for this equipment and void

your authority to operate this equipment.

For the best care of your phone, only Sprint-authorized

personnel should service your phone and accessories. Failure

to do so may be dangerous and void your warranty.

Note:

226

Section 4A: Im portant Safety Information

Maintaining Safe Use of and Access to

Your Phone

Do Not Rely on Your Phone for Emergency Calls

Mobile phones operate using radio signals, which cannot guarantee

connection in all conditions. Therefore you should never rely solely upon

any mobile phone for essential communication (e.g., medical

emergencies). Emergency calls may not be possible on all cellular networks

or when certain network services and/or mobile phone features are in use.

Check with your local service provider for details.

Using Your Phone While Driving

Talking on your phone while driving (or operating the phone without a

hands-free device) is prohibited in some jurisdictions. Laws vary as to

specific restrictions. Remember that safety always comes first.

Purchase an optional hands-free accessory at your local Sprint

Store, or call the Sprint PCS Accessory Hotline at 1-800-974-

Tip:

2221 or by dialing #222 on your phone.

Following Safety Guidelines

To operate your phone safely and efficiently, always follow any special

regulations in a given area. Turn your phone off in areas where use is

forbidden or when it may cause interference or danger.

Using Your Phone Near Other Electronic Devices

Most modern electronic equipment is shielded from radio frequency (RF)

signals. However, RF signals from wireless phones may affect inadequately

shielded electronic equipment.

RF signals may affect improperly installed or inadequately shielded

electronic operating systems and/or entertainment systems in motor

vehicles. Check with the manufacturer or their representative to determine

if these systems are adequately shielded from external RF signals. Also

check with the manufacturer regarding any equipment that has been

added to your vehicle.

Consult the manufacturer of any personal medical devices, such as

pacemakers and hearing aids, to determine if they are adequately shielded

from external RF signals.

Section 4A: Important Safety Information

227

Always turn off the phone in health-care facilities and request

permission before using the phone near medical equipment.

Note:

Turning Off Your Phone Before Flying

Turn off your phone before boarding any aircraft. To prevent possible

interference with aircraft systems, the U.S. Federal Aviation Administration

(FAA) regulations require you to have permission from a crew member to

use your phone while the plane is on the ground. To prevent any risk of

interference, FCC regulations prohibit using your phone while the plane is

in the air.

Turning Off Your Phone in Dangerous Areas

To avoid interfering with blasting operations, turn your phone off when in

a blasting area or in other areas with signs indicating two-way radios

should be turned off. Construction crews often use remote-control RF

devices to set off explosives.

Turn your phone off when you're in any area that has a potentially

explosive atmosphere. Although it's rare, your phone and accessories could

generate sparks. Sparks can cause an explosion or fire, resulting in bodily

injury or even death. These areas are often, but not always, clearly marked.

They include:

ⅷ

Fueling areas such as gas stations.

Below deck on boats.

Fuel or chemical transfer or storage facilities.

Areas where the air contains chemicals or particles such as grain, dust,

or metal powders.

ⅷ

Any other area where you would normally be advised to turn off your

vehicle’s engine.

Never transport or store flammable gas, flammable liquids, or

explosives in the compartment of your vehicle that contains

your phone or accessories.

Note:

Restricting Children’s Access to Your Phone

Your phone is not a toy. Do not allow children to play with it as they could

hurt themselves and others, damage the phone or make calls that increase

your Sprint PCS Invoice.

228

Section 4A: Im portant Safety Information

Using Your Phone With a Hearing Aid

Device

Your phone has been tested for hearing aid device compatibility. When

some wireless phones are used near some hearing devices (hearing aids

and cochlear implants), users may detect a buzzing, humming, or whining

noise. Some hearing devices are more immune than others to this

interference noise, and phones also vary in the amount of interference

they generate.

The wireless telephone industry has developed ratings for some of their

mobile phones, to assist hearing device users in finding phones that may

be compatible with their hearing devices. Not all phones have been rated.

Phones that have been rated will have an “M3” or “M4” rating on the box.

Your Sprint PCS Vision® A640 by Samsung has an M3 rating.

Phones rated M3 or M4 meet FCC requirements and may generate less

interference to hearing devices than phones that are not labeled. M4 is

the better/higher of the two ratings.

Note:

The M3/M4 ratings do not guarantee successful interoperation between

your phone and hearing aid device. Results will vary depending on the level

of immunity of your hearing device and degree of your hearing loss.

The more immune your hearing aid device is, the less likely you are to

experience interference noise from your wireless phone. Hearing aid

devices should have ratings similar to phones. Ask your hearing healthcare

professional for the rating of your aids. Most new hearing aids have at least

an M2 immunity level. Add the “M” ratings of your hearing aid and your

phone to determine probable usability:

ⅷ

Any combined rating equal to or greater than six offers best use.

Any combined rating equal to five is considered normal use.

Any combined rating equal to four is considred usable.

Thus, if you pair an M3 hearing aid with an M3 phone, you will have a

combined rating of six for “best use.”

Sprint further suggests you experiment with multiple phones (even

those not labeled M3 or M4) while in the store to find the one that

works best with your hearing aid device. Should you experience

interference after purchasing your phone, promptly return it to the store.

With the Sprint® 14 Day Risk Free Guarantee you may return the phone

within 14 days of purchase for a full refund.

Section 4A: Important Safety Information

229

Getting the Best Hearing Device Experience With

Your Phone

To further minimize interference:

ⅷ

There is usually less interference on the microphone setting than the

telecoil setting.

ⅷ

Set the phone’s Display and Keypad backlight settings to ensure the

minimum time interval:

1. Press Menu > Settings > Display > Backlight.

2. Select Main Display or Keypad and press

3. Select the minimum time setting (8 seconds) and press

Use phones with a pull-out antenna. Phones with embedded

antennae may produce more interference.

ⅷ

Position the phone so the antenna is farthest from your hearing aid.

Move the phone around to find the point with least interference.

230

Section 4A: Im portant Safety Information

Caring for the Battery

Protecting Your Battery

The guidelines listed below help you get the most out of your battery’s

performance.

ⅷ

Recently, there have been some public reports of wireless phone

batteries overheating, catching fire, or exploding. It appears that

many, if not all, of these reports involve counterfeit or inexpensive,

aftermarket-brand batteries with unknown or questionable

manufacturing standards. Sprint is not aware of similar problems with

Sprint PCS® phones resulting from the proper use of batteries and

accessories approved by Sprint or the manufacturer of your phone.

Use only Sprint- or manufacturer-approved batteries and accessories

found at Sprint Stores or through your phone’s manufacturer, or call

1-866-343-1114 to order. They’re also available at www.sprint.com –

click the Wireless link under Personal, and then click Accessories under

Shop the Sprint PCS Store Online. Buying the right batteries and

accessories is the best way to ensure they’re genuine and safe.

In order to avoid damage, charge the battery only in temperatures that

range from 32° F to 113° F (0° C

ⅷ

to 45° C).

Don’t use the battery charger in direct sunlight or in high humidity

areas, such as the bathroom.

ⅷ

Never dispose of the battery by incineration.

Keep the metal contacts on top of the battery clean.

Don’t attempt to disassemble or short-circuit the battery.

The battery may need recharging if it has not been used for a long

period of time.

ⅷ

It’s best to replace the battery when it no longer provides acceptable

performance. It can be recharged hundreds of times before it needs

replacing.

Don’t store the battery in high temperature areas for long periods of

time. It’s best to follow these storage rules:

Less than one month:

-4° F to 140° F (-20° C to 60° C)

More than one month:

-4° F to 113° F (-20° C to 45° C)

Disposal of Lithium Ion (Li-Ion) Batteries

For safe disposal options of your Li-Ion batteries, contact your nearest

Sprint authorized service center.

Special Note: Be sure to dispose of your battery properly. In some areas,

the disposal of batteries in household or business trash may be prohibited.

Section 4A: Important Safety Information

231

Radiofrequency (RF) Energy

Understanding How Your Phone Operates

Your phone is basically a radio transmitter and receiver. When it’s turned

on, it receives and transmits radio frequency (RF) signals. When you use

your phone, the system handling your call controls the power level. This

power can range from 0.006 watts to 0.2 watts in digital mode.

Knowing Radiofrequency Safety

The design of your phone complies with updated NCRP standards

described below.

In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE) and

the American National Standards Institute (ANSI) joined in updating ANSI’s

1982 standard for safety levels with respect to human exposure to RF

signals. More than 120 scientists, engineers and physicians from

universities, government health agencies and industries developed this

updated standard after reviewing the available body of research. In 1993,

the Federal Communications Commission (FCC) adopted this updated

standard in a regulation. In August 1996, the FCC adopted hybrid standard

consisting of the existing ANSI/IEEE standard and the guidelines published

by the National Council of Radiation Protection and Measurements (NCRP).

Body-Worn Operation

To maintain compliance with FCC RF exposure guidelines, if you wear a

handset on your body, use the Sprint supplied or approved carrying case,

holster or other body-worn accessory. Use of non-Sprint-approved

accessories may violate FCC RF exposure guidelines.

For more information about RF exposure, visit the FCC Web site at

www.fcc.gov.

232

Section 4A: Im portant Safety Information

Specific Absorption Rates (SAR) for Wireless Phones

The SAR is a value that corresponds to the relative amount of RF energy

absorbed in the head of a user of a wireless handset.

The SAR value of a phone is the result of an extensive testing, measuring,

and calculation process. It does not represent how much RF the phone

emits. All phone models are tested at their highest value in strict

laboratory settings. But when in operation, the SAR of a phone can be

substantially less than the level reported to the FCC. This is because of a

variety of factors including its proximity to a base station antenna, phone

design and other factors. What is important to remember is that each

phone meets strict federal guidelines. Variations in SARs do not represent a

variation in safety.

All phones must meet the federal standard, which incorporates a

substantial margin of safety. As stated above, variations in SAR values

between different model phones do not mean variations in safety. SAR

values at or below the federal standard of 1.6 W/kg are considered safe for

use by the public.

The highest reported SAR values of the A640 are:

CDMA mode (Part 22):

Head: 1.23 W/kg; Body-worn: 0.401 W/kg

PCS mode (Part 24):

Head: 1.44 W/kg; Body-worn: 0.596 W/kg

FCC Radiofrequency Emission

This phone meets the FCC Radiofrequency Emission Guidelines.

FCC ID number: A3LSPHa640S.

More information on the phone's SAR can be found from the following FCC

Web site: http://ftp.fcc.gov/cgb/sar/.

Owner’s Record

The model number, regulatory number and serial number are located on a

nameplate inside the battery compartment. Record the serial number in

the space provided below. This will be helpful if you need to contact us

about your phone in the future.

Model: Sprint PCS Vision® Phone A640 by Samsung®

Serial No.:

Section 4A: Important Safety Information

233

Phone Guide Proprietary Notice

CDMA Technology is licensed by QUALCOMM Incorporated under one or

more of the following patents:

4,901,307 5,109,390 5,267,262 5,416,797

5,506,865 5,544,196 5,657,420 5,101,501

5,267,261 5,414,796 5,504,773 5,535,239

5,600,754 5,778,338 5,228,054 5,337,338

5,710,784 5,056,109 5,568,483 5,659,569

5,490,165 5,511,073

T9 Text Input is licensed by Tegic Communications and is covered by U.S.

Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents

pending.

Phone Guide template version 5A (September 2005)

234

Section 4B

Manufacturer’s Warranty

In This Section

ࡗ

Manufacturer’s Warranty

Your phone has been designed to provide you with reliable,

worry-free service. If for any reason you have a problem with

your equipment, please refer to the manufacturer’s warranty

in this section.

For information regarding the terms and conditions of

service for your phone, please visit www.sprint.com and click

the “Terms & Conditions” link at the bottom or call Sprint

Customer Service at 1-888-211-4PCS.

Section 4B: Manu facturer’s Warranty

235

Manufacturer’s Warranty

STANDARD LIMITED WARRANTY

What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS

AMERICA, L.P. (“SAMSUNG”) warrants to the original purchaser

(“Purchaser”) that SAMSUNG's Phones and accessories (“Products”) are

free from defects in material and workmanship under normal use and

service for the period commencing upon the date of purchase and

continuing for the following specified period of time after that date:

Phone

1 Year

Batteries

1 Year

Leather Case/Pouch/Holster

Game Pad

90 Days

1 Year

Other Phone Accessories

What is Not Covered? This Limited Warranty is conditioned upon proper

use of Product by Purchaser. This Limited Warranty does not cover: (a)

defects or damage resulting from accident, misuse, abuse, neglect,

unusual physical, electrical or electromechanical stress, or modification of

any part of Product, including antenna, or cosmetic damage; (b)

equipment that has the serial number removed or made illegible; (c) any

plastic surfaces or other externally exposed parts that are scratched or

damaged due to normal use; (d) malfunctions resulting from the use of

Product in conjunction with accessories, products, or ancillary/peripheral

equipment not furnished or approved by SAMSUNG; (e) defects or damage

from improper testing, operation, maintenance, installation, or

adjustment; (f) installation, maintenance, and service of Product, or (g)

Product used or purchased outside the United States or Canada. This

Limited Warranty covers batteries only if battery capacity falls below 80%

of rated capacity or the battery leaks, and this Limited Warranty does not

cover any battery if (i) the battery has been charged by a battery charger

not specified or approved by SAMSUNG for charging the battery, (ii) any of

the seals on the battery are broken or show evidence of tampering, or (iii)

the battery has been used in equipment other than the SAMSUNG phone

for which it is specified.

236

Section 4B: Manufacturer’s Warranty

What are SAMSUNG's Obligations? During the applicable warranty period,

SAMSUNG will repair or replace, at SAMSUNG's sole option, without

charge to Purchaser, any defective component part of Product. To obtain

service under this Limited Warranty, Purchaser must return Product to an

authorized phone service facility in an adequate container for shipping,

accompanied by Purchaser's sales receipt or comparable substitute proof

of sale showing the date of purchase, the serial number of Product and the

sellers' name and address. To obtain assistance on where to deliver the

Product, call Samsung Customer Care at 1-888-987-4357. Upon receipt,

SAMSUNG will promptly repair or replace the defective Product. SAMSUNG

may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts or

components when repairing any Product or replace Product with a rebuilt,

reconditioned or new Product. Repaired/replaced leather cases, pouches

and holsters will be warranted for a period of ninety (90) days. All other

repaired/replaced Product will be warranted for a period equal to the

remainder of the original Limited Warranty on the original Product or for

90 days, whichever is longer. All replaced parts, components, boards and

equipment shall become the property of SAMSUNG. If SAMSUNG

determines that any Product is not covered by this Limited Warranty,

Purchaser must pay all parts, shipping, and labor charges for the repair or

return of such Product.

What Are the Limits On SAMSUNG's Liability? EXCEPT AS SET FORTH IN THE

EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE

PRODUCT “AS IS,” AND SAMSUNG MAKES NO WARRANTY OR

REPRESENTATION AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED,

STATUTORY OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO

THE PRODUCT, INCLUDING BUT NOT LIMITED TO:

“THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY

PARTICULAR PURPOSE OR USE;

“WARRANTIES OF TITLE OR NON-INFRINGEMENT;

“DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;

“THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS

CONTAINED THEREIN; OR

“COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW,

RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.

NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE

CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND

WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED WARRANTIES

AND CONDITIONS THAT MAY ARISE BY OPERATION OF LAW, INCLUDING IF

APPLICABLE THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME

DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.

Section 4B: Manu facturer’s Warranty

237

SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN

IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO

YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF

ANY KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR

INABILITY TO USE THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY

FROM THE USE OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH

OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,

CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS

OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT (INCLUDING

NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY

SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF

CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY

OTHER PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE EXCLUSION

OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE

ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO

HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO

PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE

OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES

PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED

WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW,

SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE

ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED WARRANTY

WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE

CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW

PERMITS.

THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-PARTY

SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.

SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE

NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO

THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY

OF ANY THIRD-PARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-

PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE PRODUCT

DISTRIBUTED BY SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO

INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT.

THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY

OF ANY SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH

THE PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH

THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.

238

Section 4B: Manufacturer’s Warranty

This Limited Warranty allocates risk of Product failure between Purchaser

and SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of

risk and the limitations of liability contained in this Limited Warranty. The

agents, employees, distributors, and dealers of SAMSUNG are not

authorized to make modifications to this Limited Warranty, or make

additional warranties binding on SAMSUNG. Accordingly, additional

statements such as dealer advertising or presentation, whether oral or

written, do not constitute warranties by SAMSUNG and should not be

relied upon.

Samsung Telecommunications America, L.P.

1301 E. Lookout Drive

Richardson, Texas 75082

Phone: 1-800-SAMSUNG

Phone: 1-888-987-HELP (4357)

No reproduction in whole or in part allowed without prior written

approval.

Specifications and availability subject to change without notice. [011604]

Section 4B: Manu facturer’s Warranty

239

240

Call Waiting 192

Caller ID 191

Camera 125–1 41

Chat 206

Index

Numerics

3-Way Calling 192

Contact Match 65

Contacts 91–10 1

Adding a Phone Number 96

Adding an Entry 92

Dialing From 40

Editing a Entry 98

Editing a Phone Number 96

Entry Options 95

Erasing 74

Abbreviated Dialing 64

Airplane Mode 61

Alarm Clock 107

Answering Calls 33

Auto Answer Mode 67

Backlight 54

Battery 24–27

Capacity 25

Finding Entries 93

Countdown 111

Charging 26

Installing 25

Bluetooth Wireless

Bookmarks

Deleting 213

Dialing Options 32

Display Screen 17, 55

Downloads

Sprint PCS Vision 206

Email 204

Entering Text 42–45

ABC Mode 44

Emoticons 45

Numbers 45

Preset Messages 45

Symbols 45

Calculator 109

Call Answer Mode 66

Call Forwarding 193

Call Guard 82

Call History 85–89

Prepending a Phone

Saving a Phone Number 88

Call Setup Options 64

Instant Messaging 205

Key Functions 15

Index

241

Key Tones 50

Plus (+) Code Dialing 40

Preset Messages 45

Location Settings 57

Lock Code

Ready Link - See Sprint PCS

Ready Link

Resetting Your Phone 77

Restriction 66

Ringer Types 48

Ringer Volume 51

Roaming 79–83

Setting Roam Mode 81

Changing 71

Locking Your Phone 70

Making Calls 31

Memo Pad 108

Menu Style 55

Messaging

Deleting Old Messages 59

Setting Alerts 58

Signature 59

Scheduler 104–10 6

Security 69–78

My Content

Erasing 74

Security Menu 70

Silence All 53

My Content Manager 209

SMS Text Messaging 186–189

SMS Voice Messaging 189–

191

Net Guard 199

Software

Updating 63

Special Numbers 73

Speed Dialing 41

Assigning Numbers 97

Sprint 411 8

Phone (Illus.) 14

Phone Number

Displaying 29

Finding 38

Sprint Customer Service 7

Sprint PCS Mail 204

Sprint PCS Picture Mail

Downloading Pictures 138

Password 127

Sending 133–136

Uploading Pictures 138

Web Site 136

With Pauses 39

Phone Settings 47–67

Auto Answer Mode 67

Call Answer Mode 66

Display Settings 54–56

Location Settings 57

Messaging Settings 58–60

Sound Settings 48–53

TTY Use 61–62

Sprint PCS Ready Link 143–

165

Erasing Entries 161

Pictures - Erasing 75

242

Index

Making a Call 147

Ready Link Contacts 154

Ready Link Mode 144

Receiving a Call 152

Settings 163

Text Greeting 54

Three-Way Calling 192

TTY Use 61–62

Turning Your Phone On and

Off 23

Updating Ready Link Lists

162

Sprint PCS Service

Account Passwords 6

Dialing Sprint PCS Services

101

Unlocking Your Phone 71

Updating your Phone

Software 63

Setting Up 3

Voice Memo 120

Voice Memos - Erasing 75

Voice Services 113–124

Voice-Activated Dialing 115

Voicemail

Sprint PCS Vision 195–216

Applications 196

Chat 206

Downloading Content 206

My Content Manager 209

Navigating the Web 201

Net Guard 199

Security Features 77

User Name 196

Menu Key 185

Options 181

Retrieving 180

Setting Up 5, 178

Volume

Text Message, Voice Mail,

Alarms, App. Volume. 52

Web 210–214

World Time 111

Sprint PCS Voice Command

217–221

Address Book 219

Making a Call 220

Sprint Service

Operator Services 9

Storing Pictures 131

T9 Text Input 43

Taking Pictures 126–13 0

Task List 110

Index

243

Yamaha CDX 10 User Manual
West Bend L5681A User Manual
TRENDnet Computer Accessories TV IP212 User Manual
Tascam US 1800 User Manual
Sony Xperia L 1271 1957 User Manual
Seagate ST3300831ACE User Manual
Seagate Barracuda ST3250310NS User Manual
Samsung Jet S8000 2 GB User Manual
Philips CT0699SLV User Manual
Panasonic Cell Phone kx t7030 User Manual