Samsung 022004 User Manual

SCH-a600 Series  
P O R T A B L E  
T r i - M o d e  
T E L E P H O N E  
User Guide  
Please read this manual before operating your  
phone, and keep it for future reference.  
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE  
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES  
THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED  
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,  
INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT  
OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN,  
CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE  
PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS  
CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE  
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT  
PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL  
SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF  
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,  
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND  
RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING  
FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL,  
SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS  
OR BENEFITS.  
Table of Contents  
i
ii  
iii  
iv  
v
Getting Started  
Closed View of Phone  
Front View of Phone  
Viewing the Display Screen  
Features of Your Phone  
Turning Your Phone On and Off  
Using the Battery and Charger  
Displaying Your Phone Number  
Making and Answering Calls  
Getting Started  
1
 
Closed View of Phone  
2
Getting Started  
 
Front View of Phone  
Getting Started  
3
   
Key Functions  
1. Speaker: The speaker allows you to hear the other caller and the  
different ring tones and sounds offered by your phone.  
2. Signal Strength Indicator: This icon represents the signal strength  
by displaying bars. The more bars displayed, the better the signal  
strength.  
3. Display Screen: The display screen displays all the information  
needed to operate your phone. The screen is divided into three  
areas; the top line contains stationary icons, a graphic area in the  
middle, and a bottom line displaying a banner along with the time  
and date.  
4. Rotating Flip: The flip rotates to the right and can be folded down  
placing it on top in a closed and working position.  
5. Lens Rotate: The digital camera lens can be positioned up or down  
using the thumb wheel adjustment.  
6. Digital Camera Lens: This is the integrated digital camera lens.  
7. OK/Message Key: This key can be used in several different ways.  
Pressed once to automatically launch Messaging. Press for two or  
more seconds to automatically dial your voicemail. Pressing  
when navigating through a menu accepts the highlighted choice in  
the menu.  
8. One Touch Camera Key: Allows you to access the integrated digital  
camera with the press of a button. When pressed, the camera menu  
is automatically displayed.  
9. Headset Jack: (located in the upper left side of the phone.) Allows  
you to plug in an optional headset for safe and convenient hands-  
free conversations.  
10. Navigation Key: This key allows you to scroll through the phone  
menu options, and provides a shortcut to phone functions from  
Standby Mode.  
4
Getting Started  
 
11. Volume Keys: Allows you to adjust the ringer volume in standby  
mode (with the flip open) or adjust the voice volume during a call.  
The volume keys can also be used to scroll up or down to navigate  
through the different menu options. To mute the ringer during an  
incoming call, press the Volume Key up or down. Press and hold to  
reject and forward an incoming call to voicemail.  
12. SEND: This key can be used in several different ways. Press once to  
answer an incoming call. Enter a number and press once to place a  
call. Press once in standby mode to access the Outgoing call log.  
Press twice in standby by mode to re-dial the last outgoing number.  
Press and hold to initiate the Voice Recognition feature.  
13. Numeric Keypad: Use these keys to enter numbers, letters, and  
characters.  
14. Shift/Asterisk: Enters the asterisk [*] character for calling features.  
In text entry mode, press to change the character input type. Press  
to change letter case when writing a message. Press to enter a  
decimal when using the calculator. Press and hold in idle state to  
activate silent mode.  
15. Power Interface Connector: The power interface connector is used  
to plug in the charging accessories.  
16. Accessory Interface Connector: This connector is used to connect  
any available accessory cables to your phone.  
17. Microphone: The Microphone allows the other caller to hear you  
clearly when you are speaking to them. The microphone is also  
used in recording.  
18. Space/Pound: Enters the pound [#] character for calling features.  
In text entry mode, press to enter a space.  
19. BACK: Deletes characters from the display. When in a menu, press  
to return to the previous menu. This key also allows you to return  
to the previous screen in the Mobile Web browser.  
Getting Started  
5
20. END: This key can be used in several different ways. Press and hold  
to turn your phone On or Off. Press once during a call to hang-up.  
Press once during an incoming call to reject and forward the  
incoming call directly to voicemail. When in the menu, press once  
to return to standby mode.  
21. Side Camera Button: This button is also used to launch the  
integrated digital camera. Press button once in camera mode to  
take pictures. Press again to return to camera mode after a picture  
is taken. In standby mode, press and hold to activate the camera  
menu.  
22. Do More Key: This button is used to launch the Do More menu  
which allows you to download web based content.  
23. MENU Key: Displays the first level or Main Menu of options. Press  
again to view the next menu page. When writing a message,  
press once to display options for entering symbols, numbers, etc.  
24. Ringer/Vibrate Indicator: This icon indicates that a ring tone or  
vibrate is selected as the ringer.  
25. Battery Indicator: The battery indicator displays the amount of  
remaining battery charge currently available in your phone. When  
all bars are displayed in the battery icon, the phone’s battery is fully  
charged. When they are not displayed, the phone’s battery is  
completely discharged or empty.  
26. 1X Indicator: Technology that allows faster data rates, always-on  
data service, and improved voice network capacity.  
Viewing the Display Screen  
This list identifies the symbols you’ll see on your display screen.  
6
Getting Started  
   
displays your current signal strength.The more  
lines you have, the stronger your signal.  
means your phone cannot find a signal.  
tells you a call is in progress.  
indicates you have a text, numeric page, or Web  
Alert messages waiting. Press  
list of pending messages.  
briefly to see a  
indicates that you have a Picture MSG waiting. If  
there is an Picture MSG and a Text message  
waiting, the Picture MSG icon is displayed.  
indicates you have a voicemail message. Press and  
hold  
to dial voicemail.  
indicates that 3G functionality is active.  
indicates that 3G functionality is dormant or  
inactive.  
indicates that you are receiving information.  
indicates that you are sending information.  
indicates your phone is in vibrate mode.  
shows your current battery charge strength.  
(Icon shown fully charged.) If the battery is  
discharged, there are no bars displayed and the  
battery icon flashes.  
indicates that your phone is roaming.  
indicates that your phone is in security mode.  
indicates that your phone is operating in analog  
service.  
Getting Started  
7
indicates that your phone is operating in digital  
service.  
indicates that your phone is in 1X service.  
indicates that your phone is in Airplane Mode. All  
TX and RX transmissions are turned Off.  
indicates that an alarm is set on your phone.  
indicates that the ringer is set at a level  
between 1-8 or 1-Beep is selected.  
Indicates that the ringer is turned Off.  
indicates that something has been  
downloaded to your phone.  
Tip: Display indicators let you know when you’re off the network.  
Features of Your Phone  
Congratulations on the purchase of your Samsung SCH-a600 Phone. This  
phone is lightweight, easy-to-use, and reliable. It also offers many significant  
features and service options:  
Dual-band/Tri-Mode capability provides access to other Digital  
Networks where roaming agreements are established (page 32).  
Mobile BrowserTM provides access to the wireless Internet in digital  
mode (page 109).  
Messaging provides quick and convenient text messaging capabilities  
Picture MSG. provides Multi Media MSG (text, voice and pics)  
Downloadable games, ringers, wallpapers, and applications allow you  
to turn down time into fun time and to personalize your phone (page  
112).  
8
Getting Started  
 
The built-in organizer lets you schedule alerts to remind you of  
important events (page 63).  
Three hundred internal phone book entries store up to five phone  
numbers each (page 54).  
The built-in camera allows you to take full-color digital pictures, view  
your pictures using the phone’s display, and instantly share them with  
family and friends (page 82).  
Voice Signal/Voice Command.  
English or French Language Menus.  
Turning Your Phone ON and OFF  
Turning Your Phone ON  
Press  
for approximately two seconds to turn your phone On.  
Once your phone is ON, it displays “Looking for Service” which indicates that  
your phone is searching for a signal. When your phone finds a signal, it  
automatically enters standby mode – the phone’s idle state. At this point, you  
are ready to begin making and receiving calls.  
If your phone is unable to find a signal after 15 minutes of searching, a Power  
Save feature is automatically activated. When a signal is found, your phone  
automatically returns to standby mode.  
In Power Save mode, your phone searches for a signal periodically without  
your intervention. You can also initiate a search for service by pressing any  
key (when your phone is turned ON).  
Tip: The Power Save feature helps to conserve your battery power when you are in  
an area where there is no signal.  
Turning Your Phone OFF  
Press  
for two seconds until you see the powering down anima-  
tion on the display screen.  
Getting Started  
9
   
Your screen remains blank while your phone is off (unless the battery is  
charging).  
Using the Battery  
Battery Capacity  
Your phone is equipped with a standard Lithium Ion (LiIon) battery. It allows  
you to recharge your battery before it is fully drained. The standard battery  
provides approximately 3 hours of continuous digital talk time (1.5 hours in  
analog) or approximately 216 hours of continuous digital standby time (15  
hours in analog).  
The extended battery provides approximately 4 hours of continuous digital  
talk time (2 hours in analog) or approximately 288 hours of continuous digital  
standby time (20 hours in analog).  
When the battery reaches 5% of its capacity, the battery icon blinks. When  
there are approximately two minutes of talk time left, the phone sounds an  
audible alert and then powers down.  
Note: Long backlight settings, searching for service, vibrate mode, camera usage  
and browser use affect the battery’s talk and standby times.  
Tip: Be sure to watch your phone’s battery level indicator and charge the battery  
before it runs out of power.  
Installing the Battery  
Your phone comes with a LiIon battery. Follow these steps to install it:  
1. Insert the battery into the opening on the back of the phone,  
making sure the plastic tab on the back is inserted into the  
matching slot in the phone.  
2. Press up until the latch snaps into place.  
10 Getting Started  
     
Removing the Battery  
To remove your battery, follow these easy steps:  
1. So that no stored messages or numbers are lost, power off your  
phone by pressing and holding the  
key.  
2. Push the battery release latch down completely. The battery will  
separate slightly from the phone.  
3. Slide the battery down and remove.  
Charging the Battery  
Your phone comes with a rechargeable battery. You should charge the battery  
as soon as possible so you can begin using your phone.  
Keeping track of your battery’s charge is important. If your battery level  
becomes too low, your phone automatically turns off. For a quick check of  
your phone’s battery level, glance at the battery charge indicator located in the  
upper-right corner of your phone’s display screen. If the battery charge is  
getting too low, the battery icon (  
) blinks and the phone sounds a  
warning tone. Always use a Samsung approved desktop charger, travel  
charger, or vehicle power adapter to charge your battery.  
Getting Started 11  
   
Warning! Using the wrong battery charger could cause damage to your phone and  
void the warranty.  
Using the Desktop Charger  
To use the desktop charger provided with your phone:  
1. Plug the outlet from the desktop charger in the wall. Place your  
phone into the desktop charger, making sure that it fits securely. If  
properly connected, you should see the charging lights.  
A red light on the desktop charger and an animated battery icon  
on the phone indicates that the battery is charging.  
A green light on the desktop charger indicates that the battery  
is at least 90 percent charged.  
A orange light on the desktop charger indicates that there is a  
problem charging the phone.  
It takes approximately 4 hours to fully recharge a completely rundown  
standard battery. With the Samsung approved LiIon battery, you can recharge  
the battery before it becomes completely run down.  
If a Travel Charger is used to charge the battery, multi-colored lights are  
displayed when the flip is closed. Red, green, and blue lights are cycled  
during the charging process. When the flip is open, an animated battery icon  
is displayed on the screen. When the battery is completely charged, all lights  
are displayed continuously, or if the flip is open, the battery animation is  
stopped and the battery icon is displayed with all full bars.  
Displaying Your Phone Number  
Just in case you forget your phone number, your phone can  
remind you.  
To display your phone number:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Phone Book.  
for My Phone #.  
12 Getting Started  
     
Making and Answering Calls  
Making Calls  
Your phone offers many different ways to make calls, including downloading  
games and ringers (page 112), Speed Dialing (page 14) and using Call History  
To make a call using your keypad:  
1. Make sure your phone is on.  
2. Enter a phone number. If you make a mistake while dialing, press  
to erase one digit at a time. Or, press and hold  
the entire number.  
3. Press  
4. When you’re finished, close the flip or press  
to erase  
.
.
Tip: To redial your last outgoing call, press  
twice.  
Answering Calls  
1. Make sure your phone is on. (If your phone is off, incoming calls go  
to voicemail).  
2. Press  
to answer an incoming call. (Depending on your  
phone’s settings, you may also answer incoming calls by opening  
the phone or by pressing any digit.)  
Your phone notifies you of incoming calls in the following ways:  
The phone rings or vibrates.  
The LED flashes.  
The backlight illuminates.  
The screen displays an incoming call message.  
If available, the phone number of the caller is displayed.  
If the phone number is in your Internal Phone Book, the Phone Book  
entry’s name is displayed.  
Getting Started 13  
         
The following option is also displayed. To select an option, press the  
corresponding softkey button.  
to mute the ringer.  
Press and hold the volume key to send directly to voicemail.  
Ending a Call  
To disconnect a call when you are finished:  
Close the phone or press  
.
Missed Call Notification  
When an incoming call is not answered, the Missed Call Info is displayed on  
your screen.Press  
to return the call.  
To place a call from the Missed Call log:  
1. Highlight the entry and press  
.
2. Press  
to dial the phone number.  
Calling Emergency Numbers  
Your can place calls to 911 (enter  
and press  
), even if  
your phone is locked or your account is restricted.  
Using One/Two/Three Touch Speed Dialing  
With this feature, you can automatically call Speed Dial entries using one key  
press for locations 1-9, two key presses for locations 10-99, or three key  
presses for locations 100-300.  
To use One-Touch Dialing for Speed Dial locations 1-9:  
Press and hold the appropriate key for a few seconds. The display  
confirms that the number has been dialed when it shows “Calling”.  
To use Two-Touch Dialing for Speed Dial locations 10-99:  
1. Press the first digit.  
2. Press and hold the second digit for a few seconds. The display  
confirms that the number has been dialed when it shows “Calling”.  
To use Three-Touch Dialing for Speed Dial locations 100-300:  
1. Press the first digit.  
2. Press the second digit.  
14 Getting Started  
         
3. Press and hold the third digit for a few seconds. The display  
confirms that the number has been dialed when it shows “Calling”.  
Note: Your phone also supports 1- 4 digit dialing. If you enter a number using the  
keypad without holding the last number and then press  
, your phone will dial  
and press , it dials 211,  
those digits. (For example, if you enter  
not the number stored in memory location 211.  
Dialing Options  
Dialing options are displayed when you enter numbers using the keypad.  
To select an option press  
and the number on the keypad that  
corresponds with the desired choice.  
Note: If you enter a number between 1-300 the first option is Speed Dial. The  
speed dial function allows you to call the number stored in that memory location by  
pressing  
.
(1) Send is used to dial the phone number. (If you are roaming and  
have the Call Guard feature activated, you must then press  
.
(2) Save to save the phone number in your Internal Phone Book. See  
(3) Find is used to locate and display Internal Phone Book entries that  
contain the numbers entered. See "Finding Internal Phone Book  
(4) Hard Pause is used to insert a hard pause.  
(5) 2 Second Pause to insert a 2-second pause.  
In-Call Options  
During a call, your phone displays menu options in addition to the main  
menu.  
To select an option, highlight it and press  
.
(1) Mute or UnMute: Select Mute to mute your phone’s microphone.  
Select Unmute to reactivate the microphone. (For more information,  
Getting Started 15  
     
(2) Call History: checks your call log for missed, outgoing, and  
incoming calls. You can also erase the logs from this menu. (For more  
(3) Phone Book: accesses the Phone Book menu options. (For more  
(4) 3-Way Call: allows you to talk to two different people at the same  
time. (For more information, see "Making a Three-Way Call" on page  
94.)  
(5) Messaging: allows you to check for voicemail and notifications.  
(For more information, see "Messaging" on page 99.)  
(6) Voice Memo: allows you to record the current conversation. (For  
more information, see "Recording Memos" on page 78.)  
(7) Utilities: accesses the utilities menu options. (For more  
(8) Phone Info: displays the hardware/software version, Username,  
and PRL being used. (For more information, see "Controlling Your  
End-of-Call Options  
After receiving a call from or making a call to a phone number that is not in  
your Internal Phone Book, the phone number, the duration of the call and the  
following menu options are displayed for 10 seconds. During this time you  
can press  
to add this number to your internal phone book. (See “Saving  
a Phone Number” on page 16.)  
Note: The End-of-Call options are not displayed for calls identified as Unknown, No  
ID, or Restricted. (page 94).  
Saving a Phone Number  
Your phone can store up to six phone numbers in each entry for a total of 300  
Internal Phone Book numbers. Each entry’s name can contain 20 characters.  
Your phone automatically sorts the Internal Phone Book entries alphabetically.  
16 Getting Started  
     
To save a number from standby mode:  
1. Enter a phone number.  
2. Press  
for Save.  
3. Press  
to Add New Entry.  
4. Select a label and press  
5. Enter a name for the new entry and press  
6. Press to Save.  
Finding a Phone Number  
.
.
You can search Internal Phone Book entries for phone numbers that contain a  
specific string of numbers.  
To find a phone number:  
1. Enter one to three numbers of the last four digits of a phone  
number and press  
.
2. Press for Find.  
Note: If you enter a number larger than 300, press  
for Find.  
3. A list of possible matches is displayed. Select the desired entry and  
press  
4. To dial the number, press  
.
.
Dialing and Saving Phone Numbers With Pauses  
You can dial or save phone numbers with pauses for use with automated  
systems, such as voicemail or credit card billing numbers. If you select a hard  
pause, the next set of numbers are sent when you press  
. If you select a  
2-second pause, your phone automatically sends the next set of numbers  
after two seconds.  
Note: You can have multiple pauses in a phone number and combine  
2-second and hard pauses.  
To dial or save phone numbers with pauses:  
Getting Started 17  
       
1. Enter the phone number.  
2. Press and select Hard pause or 2-sec pause. Hard pauses are  
displayed as a “P” and 2-second pauses as a “T”.  
3. Enter additional numbers.  
4. Press to dial the number or Press  
the number in your Internal Phone Book.  
for Save to save  
When dialing a number with a hard pause, select Send to send the next set of  
numbers.  
Dialing From the Internal Phone Book  
To dial directly from an Internal Phone Book entry:  
1. Press the navigation key left to display your Internal Phone Book.  
2. Scroll left or right to search by Name, Entry, or Group.  
3. Highlight the desired option and press the navigation key down.  
4. Enter the first few letters or the entry number to locate the desired  
entry.  
or  
Enter the entry number using the keypad.  
or  
Press the navigation key left or right to select the desired group.  
5. Scroll to highlight the name and press  
to make the call.  
18 Getting Started  
   
Controlling Your Phone’s Settings  
Display Settings  
Sound Settings  
Airplane Mode  
Phone Setup Options  
Controlling Your Phone’s Settings 19  
   
Display Settings  
Changing the Banner  
The text banner can be up to 14 characters and is displayed on your phone’s  
screen in standby mode. You may choose to display a custom banner or  
display your User Name on the phone’s screen.  
To display or change your custom banner:  
1. Press  
2. Press  
3. Press  
4. Press  
for Main Menu.  
for Setup.  
for Display.  
for Banner.  
5. Press and hold  
6. Use the numeric keypad to enter a new custom banner.  
7. Press to save and exit.  
to clear the existing banner.  
Changing the Backlight Time Length  
The backlight setting lets you select how long the display screen and keypad  
are illuminated after any key press is made.  
1. To changePress  
for Main Menu.  
2. Press  
3. Press  
4. Press for  
5. Press  
for Setup.  
for Display.  
Backlight.  
for LCD,  
for Keypad,  
for Pwr Save Mode.  
6. Use the navigation key to select Flip Open, 30 seconds,  
15 seconds, 8 seconds, for the LCD, Flip Open, 30 seconds, 15  
seconds, 8 seconds, Off for keypad, or  
On/Off for Power save mode.  
7. Press  
to Select.  
Note: Long backlight settings affect the battery’s talk and standby times.  
20 Controlling Your Phone’s Settings  
           
Changing the Wall Paper  
Your new phone offers options for what you see on the display screen while  
powering on or off and when in standby mode.  
To change the wall paper images:  
1. Press  
2. Press  
3. Press  
4. Press  
5. Press  
for Main Menu.  
for Setup.  
for Display.  
for Wall Papers.  
for Local Image,  
for Downloads, or  
for  
Picture Album.  
6. Press the navigation key left or right to display Flower, World  
Time, Calendar, Launch Pad, or Digital Clock in local image mode.  
7. Press  
to Select.  
Changing the Phone’s Menu Style  
To select the display’s menu style:  
1. Press  
2. Press  
3. Press  
4. Press  
for Main Menu.  
for Setup.  
for Display.  
for Menu Style.  
5. Press the navigation key up or down to select Camera or Nature.  
6. Press to Select.  
Reminder: To access the phone’s main menu, press (Menu) from standby mode.  
Menu items may be selected by highlighting them with the navigation key and  
pressing  
your keypad.  
, or you can press the number corresponding to the menu item on  
Sound Settings  
Adjusting the Phone’s Volume Settings  
To adjust the ringer or key beep volume:  
Controlling Your Phone’s Settings 21  
             
1. Press  
2. Press  
3. Press  
4. Press  
for Main Menu.  
for Setup.  
for Sounds.  
for Ringer Volume or  
for Key Beep.  
Tip: You can adjust the ringer volume in Standby mode or the earpiece volume  
during a call by using the volume keys on the side of your phone.  
Ringer Types  
Ringer types help you identify incoming calls and messages. You can assign  
ringer types to individual phone book entries, types of calls, and types of  
messages.  
Ring Tones include a variety of standard ringer types.  
Melodies includes a variety of standard musical melodies.  
Downloaded are ringers that have been downloaded right to your  
phone.(See “Downloading Images” on page 114 and “Ringers” on  
Vibrate alerts you to calls or messages without disturbing others. To  
select vibrate mode, press the volume key down while your phone is in  
idle mode until Vibrate is selected.  
Selecting Ringer Types for Voice Calls  
Your phone provides a variety of ringer options which allow you to customize  
your ring and volume settings.  
To select a ringer type for voice calls so you recognize when a certain type of  
call is coming in by the ringer:  
1. Press  
2. Press  
3. Press  
4. Press  
5. Press  
for Main Menu.  
for Setup.  
for Sounds.  
for Ringer Type.  
for Voice Calls.  
22 Controlling Your Phone’s Settings  
     
6. Press  
for With Caller ID or  
for No Caller ID.  
7. Press the navigation key left or right to select Ring Tones,  
Melodies, or Downloaded Ringers.  
8. Press the navigation key down and then left or right to select the  
desired Ringer.  
9. Press  
to Save to exit.  
Selecting Ringer Types for Messages  
To select a ringer type for messages:  
1. Press  
2. Press  
3. Press  
4. Press  
5. Press  
6. Press  
for Main Menu.  
for Setup.  
for Sounds.  
for Ringer Type.  
for Messages.  
for Voicemail/Text or  
for Web/Pic MSG.  
7. Press the navigation key left or right to select Ring Tones,  
Melodies, or Downloaded ringers.  
8. Press the navigation key down and then left or right to select the  
desired Ringer.  
9. Press  
to Save.  
Selecting Ringer Types for Schedule  
To select a ringer type for schedules:  
1. Press  
2. Press  
3. Press  
4. Press  
5. Press  
for Main Menu.  
for Setup.  
for Sounds.  
for Ringer Type.  
for Schedule.  
6. Press the navigation key left or right to select Ring Tones,  
Melodies, or Downloaded ringers.  
Controlling Your Phone’s Settings 23  
   
7. Press the navigation key down and then left or right to select the  
desired Ringer.  
8. Press  
to Save.  
Selecting a Key Tone  
Your phone offers a number of options for selecting the audible tones  
accompanying a key press. Longer tone lengths may be better for tone  
recognition when dialing voicemail or other automated systems, or you may  
choose from other more entertaining options.  
To select a key tone:  
1. Press  
2. Press  
3. Press  
4. Press  
for Main Menu.  
for Setup.  
for Sounds.  
for Tone Length.  
5. Select Short or Long using the navigation key.  
6. Press  
to Select.  
Alert Notification  
To enable or disable alert sounds:  
1. Press  
2. Press  
3. Press  
4. Press  
5. Press:  
for Main Menu.  
for Setup.  
for Sounds.  
for Alerts.  
for Minute Beep.  
for Service Alert.  
for Connect.  
for Disconnect Fade.  
6. Select On or Off using the navigation key and press  
to Select.  
24 Controlling Your Phone’s Settings  
   
Silence Mode  
There may be times when you need to silence your phone entirely. The  
phone’s Silence All option allows you to mute all sounds without turning your  
phone off.  
To activate Silence Mode:  
Press and hold the volume key down in standby mode. (The screen  
will display “Ringer Off.”)  
Press and hold  
to activate silent mode.  
To deactivate Silence Mode:  
Press the volume key up and select a desired volume level.  
Airplane Mode  
When your phone is in Airplane Mode, it cannot send or receive any calls or  
access online information. You may still use the phone’s other features, such as  
Games, Notepad, Voice Memos, etc., while you are in Airplane Mode.  
To set your phone to Airplane Mode:  
1. Press  
2. Press  
3. Press  
4. Press  
for Main Menu.  
for Setup.  
for Airplane Mode.  
to continue.  
5. Press the navigation key up or down to select On or Off and  
press  
.
While in Airplane Mode, your phone’s standby screen will display “Phone off.”  
The phone will power cycle when you change from Airplane mode "On" to  
Airplane mode "Off". Turning the phone off and on again will reset the phone to  
airplane mode "off".  
Note: 911 and emergency calls can not be made in Airplane mode "on"  
Phone Setup Options  
Shortcut  
Your phone offers you the option of assigning the navigation key to favorite or  
often-used function. The center and down key mappings of the navigation key  
Controlling Your Phone’s Settings 25  
           
cannot be changed. Pressing the navigation key left in standby mode will  
launch your user-defined shortcut.  
To assign your shortcut key:  
1. Press  
2. Press  
3. Press  
4. Press  
for Main Menu.  
for Setup.  
for Launch Pad.  
for Up Key,  
for Left Key, or  
for Right Key.  
5. Press the navigation key up or down to select one of the following  
functions:  
Phone Book  
Voice Memo  
Scheduler  
Messaging  
Voice Dial  
Ringer Type  
Display  
Alarms  
Calculator  
6. Press to  
Select.  
Call Answer Mode  
To set the actions required to answer an incoming call:  
1. Press  
2. Press  
3. Press  
4. Press  
for Main Menu.  
for Setup.  
for Others.  
for Call Answer and select one of the following:  
Any Key - allows you to press any key on the keypad to answer  
incoming calls.  
Send Key - You can only press  
to answer incoming calls.  
Flip Open - When you open the flip the incoming call is  
automatically connected. No keys are required.  
26 Controlling Your Phone’s Settings  
 
5. Press  
to Select.  
Auto-Answer Mode  
To answer calls when your phone is connected to an optional hands-free car  
kit or head set:  
1. Press  
2. Press  
3. Press  
4. Press  
for Main Menu.  
for Setup.  
for Others.  
for Auto Answer.  
5. Press the navigation key up or down to select Yes or No.  
6. Press  
to Select.  
Display Language  
Your phone is capable of communicating with you in either English or French.  
Selecting a language changes all menus and voice message settings. To  
assign a language for the phone’s display:  
1. Press  
2. Press  
3. Press  
4. Press  
for Main Menu.  
for Setup.  
for Others.  
for Language.  
5. Press the navigation key up or down to select English  
or French.  
6. Press  
to Select.  
Controlling Your Phone’s Settings 27  
   
Setting Your Phone’s Security  
Accessing the Security Menu  
Locking Your Phone  
Unlocking Your Phone  
Using Special Numbers  
Setting Your Phone’s Security  
28  
 
Accessing the Security Menu  
You must enter your lock code to view the Security menu.  
To access the Security menu:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Setup.  
for Security.  
4. Enter your lock code.  
5. The security menu is displayed.  
Tip: If you can’t recall your lock code, try using the last four digits of your Phone  
Number or try 0000. If none of these work, call Customer Service at (888) 987-  
HELP (4357).  
Locking Your Phone  
When your phone is locked, you can only receive incoming calls or make calls  
to 911, Customer Service, or special numbers.  
To lock your phone:  
1. From the Security menu, press  
2. Using the navigation key, select On Power Up or Lock Now and  
press  
for Lock Phone.  
.
Unlocking Your Phone  
To unlock your phone:  
1. Press  
and enter your lock code.  
Note: If Lock on Power Up was selected under Locking Your Phone and you would  
like to change the setting back to Unlocked proceed using the steps listed below.  
2. Press  
3. Press  
4. Press  
for Setup.  
for Security and enter your lock code.  
for Lock Phone.  
5. Using the navigation key, select Unlocked and press  
.
Setting Your Phone’s Security  
29  
           
Changing the Lock Code  
To change your lock code:  
1. From the Security menu, press  
for Change Lock.  
2. Enter your new lock code and press  
.
3. Re-enter your new lock code and press  
.
Calling in Lock Mode  
You can place calls to 911 and to your special numbers when in  
lock mode.  
To place an outgoing call in lock mode:  
To call an emergency number, special number, or  
Customer Service, enter the phone number and press  
.
To place normal outgoing calls, press  
screen. Enter your lock code. Enter the desired phone number and  
press  
to display the lock code  
.
Using Special Numbers  
You can save up to three special numbers in addition to your Internal Phone  
Book entries (the same number may be in both directories). You can make  
and receive calls from special numbers even when your phone is locked.  
To add or replace a special number:  
1. From the Security menu, press  
for Special #.  
2. Select entry one, two, or three and press  
.
3. Enter the number using the keypad.  
4. Press  
to Save.  
Note: There are no Speed Dial options associated with special numbers.  
Erasing the Internal Phone Book  
To erase all the names and phone numbers in your Internal Phone Book:  
1. From the Security menu, press  
for Erase Pbook.  
Setting Your Phone’s Security  
30  
           
2. Press the navigation key up and select Yes.  
3. Press  
4. Press the navigation key up again to confirm and select Yes.  
.
5. Press  
to permanently delete.  
Erase Content  
Erase Content deletes all saved downloaded content from the phone including  
games, ringers, wallpapers, and applications. To erase:  
1. From the Security menu, press  
for Erase Content.  
2. Press the navigation key up and select Yes.  
3. Press  
.
Erase Pictures  
Erase Pictures deletes all pictures currently saved in your phone.  
To erase:  
1. From the Security menu, press  
2. Press the navigation key up and select Yes.  
3. Press  
for Erase Pictures.  
.
Resetting Your Phone  
Resetting the phone restores all the factory defaults, including the ringer  
types and display settings. The Internal Phone Book, Call History, Scheduler,  
and Messaging are not affected.  
To reset your phone:  
1. From the Security menu, press  
2. Press the navigation key up and select Yes.  
3. Press  
4. Press the navigation key up again to confirm and select Yes.  
5. Press to reset.  
for Reset Phone.  
.
Setting Your Phone’s Security  
31  
           
Controlling Your Roaming Experience  
Understanding Roaming  
Setting Your Phone’s System Mode  
Controlling Your Roaming Experience  
32  
   
Understanding Roaming  
Roaming on Other Digital Networks  
When you are roaming, your phone will display the Roaming icon  
. When  
the roaming icon is displayed, you are outside of your home network and you  
will be charged a higher per minute rate for calls.  
Roaming on Analog Networks  
When you roam on analog networks, you will experience a similar quality  
provided by other analog carriers today. Although some features, such as  
Mobile Web services and Voice Command, will be unavailable, you can still  
make and receive calls and access voicemail. You will experience a few  
differences:  
You are more likely to experience static, cross-talk, fade-out, and  
dropped calls.  
Some features which are standard on the network, such as call  
waiting, web services, and direct international dialing, are unavailable.  
Though callers can leave voicemail messages while you are roaming,  
you will not receive notification until you return to the network. While  
roaming, you can periodically check your voicemail for new messages  
by dialing 1+area code+your Phone Number.  
There are security and privacy risks (eavesdropping and cloning) that  
exist with conventional analog services today.  
Your battery needs recharging sooner when you use your phone for  
analog roaming.  
Controlling Your Roaming Experience  
33  
     
Setting Your Phone’s NAM and Mode  
Your phone allows you to control your ability to roam. By using the Roaming  
menu option, you can determine which signals your phone accepts.  
Set NAM  
This setting allows you to associate your mobile identification number (MIN)  
to your phone’s electronic serial number (ESN).  
1. Press  
2. Press  
3. Press  
4. Press  
5. Press  
for Main Menu.  
for Setup.  
for Others.  
for Roaming.  
for Set NAM.  
6. Press the navigation key up or down to select NAM 1  
or NAM 2.  
7. Press  
to Select.  
Controlling Your Roaming Experience  
34  
   
Set Mode  
Choose from three different settings on your phone to control your roaming  
experience:  
1. Press  
2. Press  
3. Press  
4. Press  
5. Press  
for Main Menu.  
for Setup.  
for Others.  
for Roaming.  
for Set Mode.  
6. Press the navigation key up or down to select one of the following:  
Automatic: This setting automatically seeks the TELUS  
service. When the service is unavailable, it searches for an  
alternative system.  
Home Only: This setting allows you to log on the TELUS  
network (both Digital and Analog.)  
Analog: This setting allows you to access analog service only.  
7. Press  
to Select.  
Controlling Your Roaming Experience  
35  
Navigating Through Menus  
Menu Navigation  
Menu Structure  
Viewing the Menus  
Navigating Through Menus  
36  
 
Menu Navigation  
The navigation key on your phone allows you to scroll through menus quickly  
and easily. The scroll bar at the right of the menu keeps track of your position  
in the menu at all times.  
To navigate through a menu, simply press the navigation key up or down. If  
you are in a first-level menu, such as Settings, you may also navigate to the  
next menu by pressing the navigation key.  
Menu Structure  
Selecting Menu Items  
As you navigate through the menu, menu options are highlighted. Select any  
numbered option by simply pressing the corresponding number on the  
phone’s keypad. You may also select any item by highlighting it and pressing  
.
For example, if you want to view your last incoming call:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Call History.  
for Incoming Calls.  
Backing Up Within a Menu  
To go to the previous menu:  
Press  
.
To return to standby mode:  
Press  
.
Navigating Through Menus  
37  
       
Viewing the Menus  
Menu Diagram  
The following list outlines your phone’s menu structure.  
1: Call History  
1: Outgoing Calls  
2: Incoming Calls  
3: Missed Calls  
4: Erase History  
1: Outgoing  
2: Incoming  
3: Missed  
4: All Calls  
5: Air Time  
1: Last Call  
2: Total Calls  
2: Phone Book  
1: Find  
1: By Name  
2: By Entry  
3: By Group  
2: Add New Entry  
3: Group Setting  
1: Family  
2: Friends  
3: Colleague  
4: VIPs  
4: My Phone #  
5: Memory  
3: Messaging  
1: Voice Mail  
1: Inbox  
2: Clear VM Count  
1: Yes  
2: No  
2: Picture MSG  
1: Send Message  
Navigating Through Menus  
38  
     
2: Inbox  
3: Outbox  
4: Sent  
5: Drafts  
6: Templates  
7: Erase MSG  
1: Inbox  
1: Yes  
2: No  
2: Outbox  
1: Yes  
2: No  
3: Sent  
1: Yes  
2: No  
4: Drafts  
1: Yes  
2: No  
5: Templates  
1: Yes  
2: No  
6: All messages  
1: Yes  
2: No  
8: MSG Settings  
1: Slide Format  
1: Image Bottom  
2: Image Top  
3: Image Left  
4: Image Right  
2: Slide Duration  
1: Manual  
2: 1 Second  
3: 3 Seconds  
4: 5 Seconds  
5: 10 Seconds  
6: 12 Seconds  
Navigating Through Menus  
39  
3: Message Title  
4: Save Message  
1: Auto Save  
2: Do not Save  
3: Text MSG  
1: Send Message  
2: Inbox  
3: Outbox  
4: Web MSG  
5: Saved  
6: Erase MSG  
7: MSG Settings  
1: General  
1: Scroll Timer  
1: Off  
2: 1 second  
3: 2 seconds  
4: 3 seconds  
5: 4 seconds  
6: 5 seconds  
2: MSG Reminder  
1: Off  
2: Once  
3: Every 2 min  
2: New Message  
1: Callback #  
2: Save Message  
1: Do Not Save  
2: Prompt Save  
3: Auto Save  
3: Entry Method  
1: T9 Word  
2: Alphabet  
4: Delivery Ack  
1: On  
2: Off  
5: Canned MSG  
Navigating Through Menus  
40  
1: Yes  
2: No  
3: Call Me  
4: Need Directions  
5: Where are you?  
6: Will call later  
7: Busy  
8: On my way  
9: Will arrive in 15 minutes  
10: Thank you  
4: Do More  
1: Wireless Web  
2: Sounds  
1: Get New  
2: Ringtones  
3: Sound Clips  
3: Images  
1: Get New  
2: Wallpaper  
3: Picture Album  
4: Games  
1: Get New  
5: Tools  
1: Get New  
6: Applications  
1: Get New  
5: Camera  
1: Take Picture  
2: Camera Album  
3: Picture MSG  
4: Online Album  
5: Settings  
1: Picture Lock  
1: On  
2: Off  
2: Shutter Sound  
1: Shutter1  
Navigating Through Menus  
41  
2: Shutter2  
3: Shutter3  
4: Shutter4  
5: Shutter5  
6: Shutter6  
7: Say Cheese  
3: Quality  
1: Fine  
2: Normal  
4: Help  
6: Voice Tools  
1: Voice Memo  
1: Record  
2: Play  
3: Erase All  
1: Yes  
2: No  
7: Utilities  
1: Schedule  
2: Alarm Clock  
1: Alarm #1  
2: Alarm #2  
3: Alarm #3  
3: Note Pad  
4: Calculator  
5: World Clock  
6: Countdown  
7: Set Time  
8: Setup  
1: Display  
1: Menu Style  
1: Camera  
2: Nature  
2: Wall Papers  
1: Local Image  
1: Flowers  
2: World Time  
Navigating Through Menus  
42  
3: Calendar  
4: Launch Pad  
5: Digital Clock  
2: Downloads  
3: Picture Album  
3: Incoming Call  
1: With Caller ID  
1: No Image  
2: Downloads  
3: Picture Album  
2: No Caller ID  
1: No Image  
2: Downloads  
3: Picture Album  
4: Banner  
5: Backlight  
1: LCD  
1: Flip Open  
2: 30 seconds  
3: 15 seconds  
4: 8 seconds  
2: Keypad  
1: Flip Open  
2: 30 seconds  
3: 15 seconds  
4: 8 seconds  
5: Off  
3: Pwr Save Mode  
1: On  
2: Off  
6: SVC Lamp  
1: On  
2: Off  
2: Sounds  
1: Ringer Volume  
1: Calls  
2: Messages  
Navigating Through Menus  
43  
3: Alarms  
2: Ringer Type  
1: Voice Calls  
1: With Caller ID  
2: No Caller ID  
2: Messages  
1: Voicemail/Text  
2: Web/Pic MSG  
3: Schedule  
3: Alerts  
1: Minute Beep  
1: On  
2: Off  
2: Service Alert  
1: On  
2: Off  
3: Connect  
1: On  
2: Off  
4: Disconnect Fade  
1: On  
2: Off  
4: Roam Ringer  
1: Normal  
2: Distinctive  
5: Key Beep  
6: Tone Length  
1: Short  
2: Long  
7: Power On/Off  
1: On  
2: Off  
3: Voice Dial  
1: Adapt Digits  
2: Reset Digits  
1: Yes  
2: No  
Navigating Through Menus  
44  
3: Set Active  
1: Send Only  
2: Send and Flip  
4: Choice List  
1: Digit Dial  
1: Yes  
2: No  
2: Name Dial  
1: Yes  
2: No  
3: Phonebook  
1: Yes  
2: No  
5: Help  
4: Games/Tools  
1: Backlight  
1: 10 seconds  
2: 25 seconds  
3: 1 minute  
4: Permanent  
2: Sounds  
3: Notification  
1: Voicemail  
1: On  
2: Off  
2: Text MSG  
1: On  
2: Off  
3: Picture MSG  
1: On  
2: Off  
5: Security  
1: Lock Phone  
1: Unlocked  
2: On Power-Up  
3: Lock Now  
2: Change Lock  
Navigating Through Menus  
45  
3: Special #  
1: Empty  
2: Empty  
3: Empty  
4: Erase Pbook  
1: Yes  
2: No  
5: Erase Content  
1: Yes  
2: No  
6: Erase Pictures  
1: Yes  
2: No  
7: Reset Phone  
1: Yes  
2: No  
6: Airplane Mode  
1: On  
2: Off  
7: Launch Pad  
1: Up Key  
Note: These 9 options are also available for the Left and Right keys.  
1: Phone Book  
2: Voice Memo  
3: Scheduler  
4: Messaging  
5: Voice Dial  
6: Ringer Type  
7: Display  
8: Alarms  
9: Calculator  
2: Left Key  
3: Right Key  
8: Others  
1: Restriction  
1: Outgoing Call  
Navigating Through Menus  
46  
1: Allow all  
2: PBook Only  
3: Special# Only  
2: Call Answer  
1: Any Key  
2: Send Key  
3: Flip Open  
3: Auto Answer (Available only with CarKit and Headset)  
1: Yes  
2: No  
4: Language  
1: English  
2: French  
5: Roaming  
1: Set NAM  
1: NAM 1  
2: NAM 2  
2: Set Mode  
1: Automatic  
2: Home Only  
3: Analog  
6: Game Pad  
1: Get Device  
2: Key Remap  
1: Cursor Key  
1: Up Key  
Note: These 24 options are also available for Down, Left, Right, Fire  
A, Fire B, Fire C, Fire D, and Other keys.  
1: Up Key  
2: Down Key  
3: Left Key  
4: Right Key  
5: Camera Key  
6: WEB Key  
7: OK Key  
8: Send Key  
Navigating Through Menus  
47  
9: Back Key  
10: End Key  
11: Menu Key  
12: #1 Key  
13: #2 Key  
14: #3 Key  
15: #4 Key  
16: #5 Key  
17: #6 Key  
18: #7 Key  
19: #8 Key  
20: #9 Key  
21: #0 Key  
22: Star Key  
23: Pound Key  
24: Launching  
2: Down Key  
3: Left Key  
4: Right Key  
2: Fire Key  
1: Fire A Key  
2: Fire B Key  
3: Fire C Key  
4: Fire D Key  
3: Other Key  
1: Start Key  
2: Menu Key  
7: Connection  
1: Voice Only  
2: Fax in Only  
3: Data in Only  
4: Fax in Once  
5: Data in Once  
8: Memory Usage  
9: Phone Info  
Navigating Through Menus  
48  
InUse Menu  
1: Mute/Unmute  
2: Call History  
3: Phone Book  
4: 3-Way Call  
5: Messaging  
6: Voice Memo  
7: Utilities  
8: Phone Info  
Navigating Through Menus  
49  
Managing Call History  
Viewing History  
Call History Options  
Making a Call From Call History  
Saving a Phone Number From Call History  
Erasing Call History  
Managing Call History  
50  
 
Viewing History  
You’ll find the Call History feature very helpful. It is a list of the last 20 phone  
numbers (or Internal Phone Book entries) for calls you placed, accepted, or  
missed. Call History makes redialing a number fast and easy. It is continually  
updated as new numbers are added to the beginning of the list and the oldest  
entries are removed from the bottom of the list.  
Each entry contains the phone number (if it is available) and Internal Phone  
Book entry name (if the phone number is in your Internal Phone Book).  
Duplicate calls (same number and type of call) may only appear once on the  
list.  
To view a Call History entry:  
1. Press  
2. Press  
for Main Menu.  
for Call History.  
for Outgoing Calls  
for Incoming Calls  
for Missed Calls  
Press  
Press  
Press  
Call History Options  
For additional information and options on a particular call, highlight a Call  
History entry and press  
call and, by pressing  
. This feature displays the time and date of the  
, gives you the option of selecting:  
Send  
Save, Show Entry  
Prepend  
Erase  
Tip: You can view Call History entries by pressing the SEND key.  
Making a Call From Call History  
To place a call from Call History:  
1. Press  
for Main Menu.  
2. Press  
for Call History.  
Managing Call History  
51  
           
3. Highlight the desired entry in the Outgoing, Incoming, or Missed  
call history and press  
4. Press to dial the number.  
.
Note: You cannot make calls from Call History to entries identified as  
Unknown or Restricted. Calls labeled Data or Fax can only be dialed through a  
personal computer.  
Saving a Phone Number From Call History  
Your phone can store up to 300 Internal Phone Book entries. Phone Book  
entries can store up to a total of six phone numbers and each entry’s name  
can contain 20 characters.  
To save a phone number from Call History:  
1. Press  
for Main Menu.  
2. Press  
for Call History.  
3. Highlight the desired entry in the Outgoing, Incoming, or Missed  
call history and press  
4. Press for Save.  
.
After you have saved the number, the new Internal Phone Book entry is  
displayed. (See “Internal Phone Book Entry Options” on page 55.)  
Note: You cannot save phone numbers already in your Internal Phone Book or  
from calls identified as Unknown ID or Restricted.  
Prepending a Phone Number From  
Call History  
If you need to make a call from Call History and you happen to be outside  
your local area code, you can add the appropriate prefix by following these  
steps:  
1. Press  
for Main Menu.  
2. Press  
for Call History.  
3. Highlight the desired entry in the Missed, Outgoing, or Incoming  
call history and press  
.
Managing Call History  
52  
     
4. Press  
5. Use the keypad to enter the desired numbers.  
6. Press to call.  
to Prepend the number.  
Note: Prepending allows you to enter a series of numbers before the actual phone  
number.  
Erasing Call History  
To erase individual Call History entries, see “Call History Options” on page 51.  
To erase Call History:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Call History.  
for Erase History.  
Press  
to erase Outgoing Calls.  
to erase Incoming Calls.  
to erase Missed Calls.  
to erase All Calls.  
Press  
Press  
Press  
4. Using the navigation key, highlight Yes and press  
.
Air Time  
Air time allows you to check the time of the last call or the total air time since  
your phone was activated on the network. These times are not meant for  
billing purposes. To view the air time:  
1. Press  
2. Press  
3. Press  
4. Press  
for Main Menu.  
for Call History.  
for Air Time.  
for Last Call or  
for Total Calls.  
Managing Call History  
53  
     
Using the Internal Phone Book  
Internal Phone Book Entry Options  
Adding a New Internal Phone Book Entry  
Finding Internal Phone Book Entries  
Selecting a Ringer Type  
Internal Phone Book  
54  
   
Internal Phone Book Entry Options  
When you display an Internal Phone Book entry, the following options are  
displayed when you press  
.
Send to dial the phone number.  
Edit allows you to modify or add information to the entry.  
Prepend allows you to add a series of numbers before the phone  
number is dialed.  
Erase allows you to permanently delete the entry.  
To select an option, highlight it and press  
number on the keypad.  
or press the corresponding  
Tip: You can view the next entry by pressing the navigation key right or view the  
previous entry by pressing the navigation key left.  
Entering Text  
Selecting a Character Input Mode  
Your phone provides convenient ways to enter words, letters, punctuation,  
and numbers whenever you are prompted to enter text (for example, when  
adding an Internal Phone Book entry).  
To change the character input mode:  
1. Before you start entering text, press  
2. To select a character input mode, highlight it and  
press  
.
.
T9 (English) to enter characters using T9 Text Input (see page  
56).  
Alpha to enter characters by tapping the keypad (see page  
56).  
Symbol to enter symbols (see page 57).  
Number to enter numbers (see page 57).  
The Shortcut option is displayed when you are creating an email or entering a  
URL. The following options are available:  
Internal Phone Book  
55  
           
www. automatically enters “www.”  
.com automatically enters “.com”.  
.org automatically enters “.org”.  
.net automatically enters “.net”.  
.edu automatically enters “.edu”.  
.wap automatically enters “.wap”.  
https:// automatically enters “https://”.  
Entering Characters Using T9 Text Input  
T9 Text Input lets you enter text in your phone by pressing keys just once per  
letter. (To select the T9 Word mode when entering text, see "Selecting a  
Character Input Mode" on  
page 55.)  
T9 Text Input analyzes the letters you enter using an intuitive word database  
and creates a suitable word. (The word may change as you type.) If the word  
you want does not display after you have entered all the letters, press  
scroll through additional word selections. To accept a word and insert a  
to  
space, press  
.
If you make a mistake, press  
to delete an entire entry.  
to erase a single character. Press and hold  
Entering Characters by Tapping the Keypad  
To enter characters by tapping the keypad, select the Alpha mode (see  
“Selecting a Character Input Mode” on page 55). Press the corresponding key  
until the desired character appears. By default, the first letter of a word is  
capitalized and following letters are lowercase.  
Characters scroll in the following order:  
. , - ? ! ’ @ : / 1  
A B C 2 a b c  
D E F 3 d e f  
G H I 4 g h i  
Internal Phone Book  
56  
       
J K L 5 j k l  
M N O 6 m n o  
P Q R S 7 p q r s  
T U V 8 t u v  
W X Y Z 9 w x y z  
0
Space  
Shift  
After a character is entered, the cursor automatically advances to the next  
space after two seconds or when you enter a character not on the same key.  
Note: If you press and hold a numeric key for a few seconds, it will automatically  
display the number.  
Entering Numbers and Symbols  
To enter numbers, select the Number mode and press the appropri-  
ate key. (See “Selecting a Character Input Mode” on page 55).  
To enter symbols, select the Symbols mode. (See “Selecting a Char-  
acter Input Mode” on page 55.) To enter a symbol, press the appro-  
priate key indicated on the display.  
Adding a New Internal Phone Book Entry  
Your phone can store up to 300 Internal Phone Book numbers or email  
addresses. Phone book entries can store up to a total of six phone numbers  
and the entry’s name can contain 20 characters.  
To add a new entry:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Phone Book.  
for Add New Entry.  
4. Enter a new phone number and press  
.
Internal Phone Book  
57  
       
5. Select the Type using the navigation key.  
6. Enter the name using the keypad and press  
.
7. Press  
to Save.  
Finding Internal Phone Book Entries  
There are several ways to display your Internal Phone Book entries. Follow the  
steps outlined in the sections below to display entries from the Internal Phone  
Book menu.  
Finding Names  
You can review all the entries stored in your Internal Phone Book or find an  
entry quickly by following these simple steps:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Phone Book.  
for Find.  
4. Press the navigation key left or right to search by Name, Entry, or  
Group.  
5. Once the desired option is highlighted, press the navigation key  
down.  
6. Enter the first few letters or entry # to locate the desired entry.  
7. Scroll to highlight the name and press  
to make the call.  
Shortcut: From standby mode, press the navigation key left to display the Find  
feature.  
Finding Speed Dial Numbers  
To find phone numbers you have stored in speed dial locations:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Phone Book.  
for Find.  
4. Press the navigation key to the right until By Entry is highlighted.  
Internal Phone Book  
58  
   
5. Enter the entry or speed dial location number.  
Finding Group Entries  
To find entries designated as part of a group:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Phone Book.  
for Find.  
4. Press the navigation key to the right until By Group is highlighted.  
5. Press the navigation key down once to highlight the group  
selection. Press the navigation key left or right to select the desired  
group. (If you do not have any groups associated with your phone  
the group names. If no group is selected, the entry is automatically  
set to No Group.)  
Adding a Phone Number to an Internal Phone Book Entry  
To add a phone number to an entry:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Phone Book.  
for Find.  
4. Select the desired entry and press  
5. Press to Edit the entry.  
6. Press the navigation key down until the desired label is selected  
and press to edit.  
7. Enter the phone number using the keypad and press  
8. Press to Save.  
.
.
Note: Phone numbers labeled Fax or Data can only be dialed through a personal  
computer.  
Internal Phone Book  
59  
 
Editing an Internal Phone Book Entry’s  
Phone Number  
To edit an entry’s phone number:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Phone Book.  
for Find.  
4. Select the desired entry and press  
5. Press to Edit the entry.  
6. Press the navigation key down until the desired phone number is  
.
selected and press  
to edit.  
7. Press and hold  
to erase the entire number or press once to  
erase just the last number.  
8. Enter the new number using the keypad and press  
.
9. Press  
to Save.  
Selecting a Ringer Type for an Entry  
You can assign a ringer type to an Internal Phone Book entry so you can  
identify the caller by the ringer type. (See “Ringer Types” on page 22.)  
To select a ringer type for an entry:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Phone Book.  
for Find.  
4. Select the desired entry and press  
5. Press to edit the entry.  
6. Press the navigation key down until Name Ringer is selected and  
press to Edit.  
.
7. Press the navigation key to the right and highlight the desired  
Ringer Category (Default, Ringtones, Melodies, or Downloaded.)  
8. Press the navigation key down.  
Internal Phone Book  
60  
     
9. Press the navigation key to the left or right to highlight and listen to  
the desired Ringer and press  
10. Press to Save.  
.
Secret Internal Phone Book Entries  
You can hide an entry’s phone number(s) and require your lock code to edit  
the entry by making it secret. The entry name is still displayed, but the entry’s  
phone numbers are replaced by “(SECRET)”.  
To make an entry secret:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Phone Book.  
for Find.  
4. Select the desired entry and press  
5. Press to edit the entry.  
.
6. Press the navigation key down until Secret is selected.  
7. Press the navigation key left or right until On is displayed in the  
Secret field and press  
To make an entry public:  
1. Display an Internal Phone Book entry.  
2. Press to edit the entry.  
to Save.  
3. Enter your lock code.  
4. Press the navigation key down until Secret is selected.  
5. Press the navigation key left or right until Off is displayed in the  
Secret field and press  
to Save.  
Tip: If you can’t recall your lock code, try using the last four digits of your Phone  
Number or try 0000. If none of these work, call Customer Service at (888) 987-  
HELP (4357).  
Internal Phone Book  
61  
   
Changing the Group Name  
You can associate a preset group name to your entries to help you sort them  
easier in the phone book. The preset group names already programmed into  
your phone are:  
Family  
Friends  
Colleague  
VIPs  
No Group  
To associate an existing number located in your phone book:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Phone Book.  
for Find.  
4. Select the desired entry and press  
5. Press to edit the entry.  
.
6. Press the navigation key down until the Group is selected.  
7. Press the navigation key left or right until the desired group name is  
displayed.  
8. Press  
to Save.  
To associate a new number:  
1. Follow the steps for entering a Adding a New Internal Phone Book  
Entry.  
2. Before saving, press the navigation key down until Group is  
selected.  
3. Press the navigation key left or right until the desired group name is  
displayed.  
4. Press  
to Save.  
Internal Phone Book  
62  
 
Personal Organizer  
Adding an Event to the Scheduler  
Event Alerts  
Viewing Events  
Using the Calculator  
Using the Alarm Clock  
Using the Notepad  
Using Your Phone’s Utilities  
Personal Organizer 63  
   
Adding an Event to the Scheduler  
Your Scheduler helps organize your time and reminds you of  
important events.  
To add an event:  
1. Press  
2. Press  
3. Press  
4. Press  
for Main Menu.  
for Utilities.  
for Schedule.  
for Add New.  
5. Enter the event description using the keypad and  
press  
6. Enter the Start Time and Date using the keypad. Press  
and for PM.  
.
for AM  
7. Enter the End Time and Date using the keypad.  
8. Press the Navigation key left or right and select one of  
the following:  
No Alarm  
On Time  
10min before  
30min before  
1Hr before  
9. Press to  
Save.  
Event Alerts  
There are several ways your phone alerts you of scheduled events:  
By playing the assigned ringer type.  
By illuminating the backlight.  
By flashing the LED.  
To select the ringer:  
1. Press  
for Main Menu.  
2. Press  
for Setup.  
64Personal Organizer  
     
3. Press  
4. Press  
5. Press  
for Sounds.  
for Ringer Type.  
for Schedule.  
6. Press the navigation key left or right to select the desired ringer  
category.  
7. Press the navigation key down and then left or right to select the  
desired ringer or melody.  
8. Press  
to Save.  
Viewing Events  
To view your scheduled events:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Utilities.  
for Schedule.  
4. Select desired date and a list of the events scheduled for the day are  
displayed.  
Erasing a Day’s Events  
To erase a scheduled day’s events:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Utilities.  
for Schedule.  
4. Select desired date and a list of the events scheduled for the day are  
displayed.  
5. Highlight the desired event and press  
to Erase.  
to confirm.  
6. Highlight Yes using the navigation key and press  
Personal Organizer 65  
   
Going to Today’s Scheduler Menu  
If you are viewing the Scheduler menu and wish to go to the Scheduler menu  
for today’s date:  
1. From the Scheduler menu, highlight the current date and  
press  
.
Purging Events  
To delete events scheduled before a specific time and date:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Utilities.  
for Schedule.  
4. Highlight the desired day of the event being deleted and press  
.
5. Press the navigation key up or down to select the  
desired event.  
6. Press  
to Erase the event.  
7. Highlight Yes with the navigation key and press  
to confirm.  
Purging All Events  
To delete all scheduled events:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Utilities.  
for Schedule.  
4. Highlight the desired day of the event being deleted and press  
5. Press to Erase All events.  
.
6. Highlight Yes with the navigation key and press  
to confirm.  
Using the Alarm Clock  
Your phone comes with a built-in alarm clock with multiple alarm capabilities.  
To use this feature, follow these easy steps:  
1. Press  
for Main Menu.  
2. Press  
for Utilities.  
66Personal Organizer  
         
3. Press  
for Alarm Clock.  
, , or to select an Alarm.  
4. Press  
5. Press the navigation key left or right and select On.  
6. Press the navigation key down once and enter the  
alarm time.  
7. Press the navigation key down once to select the desired ringer.  
Cycle through the ringers by pressing the navigation key left or  
right.  
8. Press the navigation key down once to select the alarm frequency.  
Press the navigation key left or right and select one of the following  
options:  
Daily  
Once  
Mon to Fri  
Sat & Sun  
9. Press  
to Save.  
Using the Note Pad  
Your phone comes with a note pad you can use to compose and store  
reminders and notes to help keep you organized.  
To compose a note:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Utilities.  
for Note Pad.  
4. If there are no existing notes, the phone displays “No Note Entered”  
and a New Note screen is automatically displayed. If there is a note  
already saved, press  
for Add New.  
5. Enter up to 64 characters in the memo and press  
to Save.  
To read a saved note:  
1. Press  
for Main Menu.  
Personal Organizer 67  
   
2. Press  
for Utilities.  
3. Press  
for Note Pad.  
4. Highlight the desired note using the navigation key and press  
to view.  
To erase saved notes:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Utilities.  
for Note Pad.  
4. Highlight the desired note using the navigation key and press  
for Erase.  
5. Select Yes and press  
to confirm the deletion.  
Using the Calculator  
Your phone comes with a built-in calculator function. To use this feature,  
follow these easy steps:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Utilities.  
for Calculator.  
4. Enter a number with the keypad. (Press  
point and/or to make the number negative or positive.)  
5. Press the navigation key:  
to insert a decimal  
Left - Subtract  
Right - Multiply  
Up - Add  
Down - Divide  
- Decimal  
- To change the -/+ sign.  
6. Enter the next number using the keypad.  
68Personal Organizer  
   
Note: For more complex equations, enter all the numbers and mathematical signs  
before pressing OK.  
7. Press  
to view the results.  
World Clock  
World Clock displays what time it is in twenty-four different time zones  
around the world together with one or more major cities, states, regions, or  
countries in a time zone.  
To access world clock:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Utilities.  
for World Clock.  
4. Press the navigation key left, right, up, or down to display the  
different time zones.  
5. Press  
that time zone.  
to turn DST (Daylight Savings Time) On or Off for  
Note: A sun icon is displayed on-screen if DST is selected for a time zone.  
Countdown  
Countdown allows you to enter a future date and time into the phone and then  
see the amount of days, hours, and minutes until that time is reached.  
To setup a new countdown:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Utilities.  
for Countdown.  
4. If there are no existing countdowns, the phone displays “No  
Countdown Entered” and a New Countdown screen is automatically  
displayed. If there is already a countdown entered, press  
for Add New.  
Personal Organizer 69  
   
5. Enter a name using the keypad and press  
.
6. Enter the Input time and date values and press  
to Save.  
To view a countdown:  
1. Press  
2. Press  
for Main Menu.  
for Utilities.  
3. Press  
for Countdown.  
4. Press the navigation key up or down to highlight the desired  
countdown and press  
.
Tip: When viewing an existing countdown, press the navigation key left or right to  
cycle between the other countdown entries.  
Note: No audible alert is sounded when the countdown is reached.  
70Personal Organizer  
Voice Services  
Using Voice-Activated Dialing  
Voice Memos  
Voice Services 71  
 
Activating Voice Recognition  
Voice recognition allows you to say commands to perform common functions  
supported by your phone. There is no voice training required to use the voice  
recognition feature. You simply say the pre-designated command displayed  
on your screen in a normal tone of voice to perform the desired function.  
To activate voice recognition:  
1. Press and hold  
.
2. The phone prompts you to say a voice command. Wait for the beep  
and then say one of the following commands:  
Digit Dial  
Name Dial  
Voice Memo  
Phone book  
Browser  
Play Games  
When it recognizes one of these commands, the phone launches the  
associated application. If the phone does not hear a command within  
approximately eight seconds, it de-activates voice recognition without taking  
any action.  
Note: If you want to use a different button to activate voice recognition, press  
for Launch Pad. On this menu, you can change button assignments,  
including the button used to launch "Voice Dial," which is the voice recognition  
application.  
Digit Dial  
Digit Dial allows you dial any valid 7 or 11 digit North American phone  
number by speaking the number naturally, without pausing between the  
digits.  
Tips for using Digit Dial:  
Digit Dial works best in quieter environments.  
When saying a number, speak at a normal speed and say each digit  
clearly. There is no need to pause between digits.  
72 Voice Services  
       
The phone recognizes the digits one, two, three, four, five, six, seven,  
eight, nine, zero, and oh. The phone does not recognize numbers such  
as "one eight hundred" for "1-800." Instead, say "one-eight-zero-zero."  
The phone recognizes only valid 7, 10, or 11 digit North American  
phone numbers.  
If your phone does not usually recognize you correctly when you are  
using Digit Dial, try adapting Digit Dial to your voice, which can  
significantly improve accuracy for some speakers. See the section  
"Adapting Digit Dial" for details.  
To place a call using Digit Dial:  
1. Activate voice recognition by pressing and holding  
. The phone  
prompts you for a command.  
2. Say Digit Dial. The phone prompts you to say the number.  
3. Say a valid 7, 10 or 11 digit North American phone number  
naturally and clearly.  
4. If the phone asks you, "Did You Say," followed by the correct  
number, say "Yes." You can also select the correct number from  
those displayed on the screen by pressing  
number. The phone will then dial the number.  
on the correct  
5. If the phone asks you, "Did You Say," followed by an incorrect  
number, say "No." If there are other alternatives, the phone will  
prompt you with the next one. You can also press the navigation  
key up or down to select the correct number from the Choice List,  
and then press  
to dial.  
Note: In some cases, the phone might ask you to repeat a number. Make sure that  
the number is a valid 7, 10, or 11 digit North American phone number, and then say  
the number again. If the number isn't valid, or if the phone still doesn't understand  
the number on the second try, it will not place a call.  
Voice Services 73  
Enabling/Disabling Digit Dial Choice Lists  
You can customize whether the Digit Dial feature displays the list of top voice  
recognition choices or automatically dials the first number, without displaying  
a choice list.  
To enable or disable choice lists for Digit Dial:  
1. Press  
2. Press  
3. Press  
4. Press  
for Setup.  
for Voice Dial.  
for Choice List.  
for Digit Dial.  
5. Press the navigation key up or down to select Yes or No and press  
.
Note: Disabling the choice list does not disable the digit dial feature. Only the  
choice list is disabled.  
Adapting Digit Dial  
Digit Dialing is speaker independent, which means that no training or  
adaptation is required. Some users with heavy accents or unusual voice  
characteristics may find difficulty in achieving high accuracy with speaker  
independent digit dialing, so the Adapt Digits feature allows users to  
dramatically improve the digit accuracy through adaptation. Users who get  
acceptable digit recognition accuracy will find no additional benefit to  
performing the Adapt Digit adaptation.  
After you adapt Digit Dial, your phone will be customized to your voice. Other  
people will not be able to use Digit Dial on your phone unless they reset the  
phone to factory defaults.  
Important: ONLY adapt Digit Dial if the system is frequently misrecognizing your  
speech. You can always restore the system to its original factory setting.  
Adaptation involves recording several digit sequences to teach the system  
your voice. The adaptation process takes about 3 minutes.  
Tips for adapting Digit Dial:  
Adapt digits in a quiet place.  
74 Voice Services  
   
Make sure you wait for the beep before starting to speak.  
Speak clearly, but say each digit sequence naturally.  
If you make a mistake while recording a sequence of digits, or if there  
is an unexpected noise that spoils the recording, you can say or select  
No when the prompt asks, “Did the recording sound OK?”. You will  
then be prompted to re-record the sequence.  
To adapt Digit Dial to your voice:  
1. Press  
2. Press  
3. Press  
for Setup.  
for Voice Dial.  
for Adapt Digits.  
4. The phone displays the first digit sequence. When you are ready to  
start recording, press  
. The phone prompts you to say the first  
sequence of digits.  
5. Wait for the beep, and then repeat the digits using a normal tone of  
voice. The phone plays back your recording and asks you if the  
recording sounds "OK."  
6. If the recording sounds ok (no mistakes, and no background  
noises), say "Yes." If you need to re-record the digits to fix any  
problems, say "No." The phone then prompts you to say the digits  
again. Wait for the beep, and then record the digits again. Repeat  
this step until you are satisfied with the recording.  
7. After confirming that the recording sounds ok, repeat the recording  
process with the next set of digits. After six sets of digits, the phone  
will ask you whether you want to do more adaptation. Answer "Yes."  
8. Repeat steps 4-8 for another six sets of digits. After the sixth set of  
digits, you will be half way through the session and the phone asks  
“More Adaptation?”. Select OK to continue for six more sets of  
digits, or press  
for partial adaptation. When you are finished  
with a full session, you will reach a screen that reads, “Adaptation  
Complete”.  
Voice Services 75  
Note: It is recommended that you perform the complete adaptation of Digit Dial at  
least once to achieve the maximum benefit of this feature. If a partial adaptation is  
performed, you can always return later and resume the process from the half way  
point.  
Resetting Digit Dial Adaptation  
To erase any adaptation and reset Digit Dial to its original state:  
1. Press  
2. Press  
3. Press  
for Setup.  
for Voice Dial.  
for Reset Digits.  
4. Press the navigation key up or down button to select Yes and press  
.
Using Name Dial  
For best results with Name Dial, enter first and last names in your phone  
book, avoid using abbreviations, and make sure the names are spelled  
correctly. Name Dial automatically voice-activates every contact in your  
Phone book without the need to record or "train" names before using them.  
With Name Dial you can dial any person in your Phone book by saying that  
person's name.  
To place a call using Name Dial:  
1. Activate voice recognition by pressing and holding  
. The phone  
prompts you for a command.  
2. Say Name Dial. The phone prompts you to say a name.  
3. Say the full name of the person you want to call, exactly as it is  
entered in your Phone book. The phone plays the name through the  
earpiece and displays it on the screen. If the Phone book contains  
only one number for the name, the phone automatically dials that  
number.  
4. If the name that you spoke has more than one number associated  
with it, the phone displays the different locations (home, work, etc.)  
and asks you which one to dial. Say one of the following locations:  
Home  
76 Voice Services  
   
Work  
Mobile  
Pager  
Fax  
5. The phone dials the number for the location you specified.  
Enabling/Disabling Name Dial Choice Lists  
You can customize whether the Name Dial feature displays a list of choices for  
names that sound alike, or brings up information for the first recognized  
name, without displaying a choice list.  
To enable or disable choice lists for Name Dial:  
1. Press  
2. Press  
3. Press  
4. Press  
for Setup.  
for Voice Dial.  
for Choice List.  
for Name Dial.  
5. Press the navigation key up or down to select Yes or No and press  
.
When choice lists are enabled for Name Dial, after you say the name, the  
phone will display one or more names on the screen and prompt you to  
confirm the name you spoke.  
"If the phone says, "Did You Say," followed by the correct name, say "Yes."  
"If the phone asks you, "Did You Say," followed by an incorrect name, say "No."  
The phone then prompts you with the next name, if there is one. If there are  
no more names, the phone will say "Sorry, No Match Found," and will not  
place a call.  
You can also choose a name from the choice list manually. Use the Launch  
Pad up and down buttons to highlight the name, and then press  
it.  
to select  
Using Phone Book  
Phone book allows you to retrieve contact information for any person saved in  
your phone by saying the full name of the person.  
To retrieve information using Phone book:  
1. Activate voice recognition by pressing and holding  
. The phone  
Voice Services 77  
     
prompts you for a command.  
2. Say Phone book. The phone prompts you to say the name.  
3. Say the full name of the person, exactly as it is entered in your  
Phone book. The phone plays the name it recognized through the  
earpiece, and then opens the contact information for that name.  
Enabling/Disabling Phone book Choice Lists  
You can customize whether the Phonebook feature displays a list of choices  
for names that sound alike, or brings up information for the first recognized  
name, without displaying a choice list.  
To enable or disable choice lists for Phone book:  
1. Press  
2. Press  
3. Press  
4. Press  
for Setup.  
for Voice Dial.  
for Choice List.  
for Phone book.  
5. Press the navigation key up or down to select Yes or No and press  
.
When choice lists are enabled for Phone book, after you say the name, the  
phone will display one or more names on the screen and prompt you to  
confirm the name you spoke.  
"If the phone says, "Did You Say," followed by the correct name, say "Yes."  
"If the phone asks you, "Did You Say," followed by an incorrect name, say "No."  
The phone then prompts you with the next name, if there is one. If there are  
no more names, the phone will say "Sorry, No Match Found."  
You can also choose a name from the choice list manually. Press the  
navigation key up or down to highlight the name, and then press  
select it.  
to  
Recording Memos  
You can use your phone to record memos that you can listen to later. You can  
record yourself speaking into the phone's built-in microphone, or record the  
person at the other end of a phone call.  
78 Voice Services  
       
Note: You can store up to 10 minutes of memos at a time, in up to 20 separate  
memos. Individual memos can be up to 30 seconds long.  
To record a memo using the phone's built-in microphone:  
1. Press  
2. Press  
3. Press  
for Voice Tools.  
for Voice Memo.  
for Record. The phone prompts you to start recording  
after the beep.  
4. Wait for the beep and then start speaking. As it is recording, the  
phone displays a countdown timer that shows how many seconds  
are left for recording.  
5. To pause the memo, press  
. When a memo is paused, press  
again to resume recording.  
6. To finish recording, press  
.
When you have finished recording, the phone offers you the option of  
reviewing the memo, re-recording the memo, saving it, or quitting without  
saving the memo.  
To listen to the memo again, select Review and  
press  
To discard the current recording and make a new one, select  
Rerecord and press  
To save the memo and return to the home screen, select Save and  
press . The phone prompts you to enter a name for the memo.  
Enter a name. Use the Menu to enter letters, numbers, or symbols.  
When you are done, press  
To quit the memo feature without saving the memo, select Quit and  
press  
.
.
.
.
Voice Services 79  
Send To  
This feature allows you to send a recorded voice mail to an email address or  
another phone. To send a voice memo:  
1. Press  
2. Press  
3. Press  
for Voice Tools.  
for Voice Memo.  
for Play or follow the steps under Recording Memos to  
create a new memo.  
4. Highlight the desired voice memo and press  
for Send  
To.  
5. Press  
the keypad. Press  
6. Press for Next.  
7. Press the navigation key down to highlight the address window and  
press  
8. Enter the desired email address or mobile number and press  
to enter a caption for the voice memo using  
again when finished.  
.
.
9. Press  
to Send.  
Upload  
1. Press  
2. Press  
3. Press  
for Voice Tools.  
for Voice Memo.  
for Play.  
4. Highlight the desired voice memo and press  
for Upload.  
80 Voice Services  
Reviewing and Erasing Memos  
To review (replay) a memo you have recorded earlier:  
1. Press  
2. Press  
3. Press  
for Voice Tools.  
for Voice Memo.  
for Play. The phone displays a list of saved memos,  
with the first one selected.  
4. Select a memo and press  
to the memo you want to review. The phone replays the memo. To  
, or press the number corresponding  
pause the memo during replay, press  
resume replaying the memo.  
. Press  
again to  
To erase an individual memo:  
1. Follow the steps above to display the list of saved memos.  
2. Select the memo to erase.  
3. Press  
for Erase.  
4. Press the navigation key up to select Yes and press  
.
To erase all existing voice memos in a single step:  
1. Press  
2. Press  
3. Press  
for Voice Tools.  
for Voice Memo.  
for Erase All. The phone asks you if you want to erase  
all voice memos.  
4. Select Yes and press  
.
Voice Services 81  
Using Your Phone’s Camera  
Take Pictures  
Storing Pictures  
Camera Settings  
Camera  
82  
   
Taking Pictures  
Taking pictures with your phone’s built-in Digital Camera is as simple as  
choosing a subject, pointing the lens, and pressing a button. You can activate  
Camera mode and take pictures whether the phone is open or closed.  
To Take a Picture With the Phone Open:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Camera.  
for Take Picture.  
Shortcut: To activate Camera mode, you can also press  
or the Side Camera  
button twice. (see illustration on page 3). You can also press and hold either button  
to activate the camera.  
4. Using the phone’s main LCD as a viewfinder, aim the camera lens at  
your subject. Use the thumb wheel to move the lens up or down.  
5. Hold the camera steady. To take the picture, press  
or the Side  
Camera button until the shutter sounds.  
To Take a Picture With the Phone Closed:  
1. Rotate the flip to the out position and close. Press and hold the Side  
Camera button to activate Camera mode.  
2. Point the camera lens at your subject. You can check the picture  
framing through the external display screen.  
Note: When taking a picture with the phone closed and the camera lens rotated  
towards you, the subject image appears in reverse on the external display. Select  
Inversion using the volume keys and navigating the icon settings on the bottom of  
the display to make the image display correctly.  
3. Press Side Camera button to take the picture.  
4. Press the Side Camera button again to return to the camera mode.  
Camera  
83  
   
Image Resolution  
Your full-color digital camera can take pictures in three different modes. Two  
of the modes allow you to increase the zoom using digital magnification up to  
two times the original display. This allows you to get a closer view of the  
subject or scenery being photographed.  
The following image resolutions are available:  
High: This is the highest resolution setting available for this camera,  
thus allowing you the most image detail. Images taken at the high  
setting require more memory to save than the other two modes. The  
zoom feature is not available in this mode.  
Medium: The medium setting allows you to take good quality images  
without using too much memory. The zoom feature is available using  
the navigation key.  
Low: The low setting allows you to take average quality images. You  
can save the most images in memory using this setting. The zoom  
feature is available using the navigation key.  
To access the picture settings:  
1. Press  
2. Press  
3. Press  
4. Press  
for Main Menu.  
for Camera.  
for Settings.  
for Picture Lock,  
for Shutter Sound,  
for  
Quality, or  
for Help.  
Camera Icons  
When the flip is closed and you are in Camera mode, there are several icons  
displayed on the bottom of the screen. These icons are the options associated  
with taking pictures when the flip closed.  
The available settings are:  
Inversion: allows you to change the image display to  
match the viewing angle of the lens. If the image is  
upside down, you can make it display right side up by  
Camera  
84  
using inversion. Inversion can also be done by pressing  
the volume keys located on the side of the phone.  
Zoom: allows you to digitally zoom up to two times the  
original display.  
Flash: turns the flash On or Off.  
Brightness: allows you to increase/decrease or use auto  
mode for the brightness setting of the image. The  
brightness setting is changed and displayed on screen  
to insure you get the proper lighting.  
Resolution: allows you to change the resolution of the  
image from high, medium, or low.  
Review: allows you to review the images already saved  
in memory.  
To access the different settings available, press the volume key up to display  
the different options and then press down to select.  
Camera Options  
Camera options allow you to set up options associated with taking the picture.  
When you are in the camera mode, press  
options:  
to display the following  
Flash - Allows you to turn the flash always on or off when taking a  
picture. Also allows you to turn the flash on for just one picture.  
Self Timer - Allows you to configure a timer for 5 or 10 seconds. This  
feature can also be turned Off.  
Brightness - Allows you to set the brightness level automatically or  
manually. when brightness is set to manual, the left or right navigation  
key can be used to increase or decrease the desired brightness.  
Fun Frames - Allows you to select a frame around the image before the  
picture is taken. Press the navigation key left or right to select the  
desired frame. Press  
to select and return to the camera mode.  
Camera  
85  
Multi-Shot - Allows you to configure the camera to take 3, 5, 10, or 15  
quick pictures when you press  
on the image quality selected.  
. The number of pictures depends  
Color Tones - Allows you to select between several different color  
tones by pressing the navigation key left or right. When you find the  
desired tone, press  
.
White Balance - Allows you to set up the white balance of the camera  
automatically or manually using the different preset modes.  
Setting the Self-timer  
To activate the Self-timer and get yourself in on the picture:  
1. With the phone open and in Camera mode, press  
to select  
Options.  
2. Press  
3. Using the navigation key, highlight the length of delay you want the  
timer to use (10 seconds or 5 seconds) and press . An icon is  
displayed in the top right corner of the screen. To deactivate the self  
timer press (Cancel). The self timer icon in the top right  
for Self-timer.  
corner of the camera screen disappears and the camera mode is  
returned to normal shooting mode.  
4. Press  
to start the timer. (A timer is displayed in the lower left  
portion of the main LCD during the self-timer countdown.)  
5. Get ready for the picture. When the timer is down to three seconds,  
the Self-timer icon will turn red and the phone will begin to beep.  
To take a picture of yourself using the self-timer:  
Press  
to Cancel.  
Note: While the Self-timer is active, all keys are disabled except Back, End, and  
the right softkey button (Cancel).  
Camera  
86  
Camera Album  
Picture options allow you to set up different options associated with the  
images saved on your phone. When reviewing your pictures, press  
display the following options:  
to  
Take Picture - Allows you to go back to the live camera mode from  
review mode.  
Assign - Allows you to use the picture for a wallpaper, picture ID, or  
incoming caller. In the address book, pictures can be used to identify  
incoming callers by displaying the image on screen.  
Send To - Allows you to send the picture to another user.  
Upload - Allows you to send a picture to an online album.  
Erase - Removes the image for memory.  
Edit Caption - Allows you to edit the caption of the image. Up to 32  
characters can be entered to identify the image.  
Picture Info - This option displays the caption, time and date,  
resolution, size and quality of the image.  
Expand/Thumbnail - Changes the display to thumbnail or expanded  
view, which allows you to see several images at once or the whole  
image on screen.  
Picture MSG  
You can send pictures, text, and sound from one phone to another or to an  
email address conveniently. You can create sound files to add while  
composing a Picture Message.  
For more information on Creating a Voice Memo, see ‘Recording Memos” on  
page 78. For more information on Picture Album, see ‘Camera Album” on  
Camera  
87  
   
Send Message  
1. Press  
for Messaging.  
for Picture MSG.  
for Send Message.  
2. Press  
3. Press  
Note: You can also access the Picture Message screen by pressing  
.
4. Press  
when finished.  
5. Highlight Add Image and press  
6. Press the navigation key left or right to select the desired images  
and press  
7. Press  
for Edit and enter text in Caption field. Press  
again  
.
.
for Add Slide.  
8. Press the navigation key down to highlight Add sound and press  
.
9. Press  
for Voice Record.  
10. Record your message and press  
when finished.  
11. If satisfied with the message, press  
for Attach.  
12. Enter a name for the sound using the keypad and press  
.
13. Press  
14. Press  
15. Press  
again to attach the memo.  
for Next.  
to select an email address or phone number from the  
address book.  
— Or —  
Press the Navigation key down to highlight the address field and press  
to enter a web enabled phone number or email address.  
16. When you are finished entering recipients, press  
.
17. Press  
for Send.  
Camera  
88  
 
Menu Settings  
The following menu settings are available in Send Message:  
Next - Allows you to enter an email address or phone number  
to send the Picture Message.  
Preview - Displays a preview of the image as it would be seen  
by the recipient.  
Save - Saves the message in a draft or template folder for later  
editing.  
Settings - Allows you to set up the slide duration and slide  
format settings of the image. Slide duration is used to change  
the amount of time a slide is displayed on the screen. Slide  
format is used to change the slide position in the picture.  
Add Slide/Remove Slide - Allows you to add or remove a slide.  
Delete Image/Sound - Allows you to delete an image or sound  
from the picture message.  
Online Album  
Online album will open a mobile browser and connect to the TELUS online  
album.  
Note: Online album can be viewed with you computer (for more info refer to  
TELUS web site).  
Camera  
89  
 
Settings  
Picture Settings  
There are several settings associated with the full-color digital camera. These  
settings allow you to customize how the camera operates when taking  
pictures.  
The settings are:  
Picture Lock: This setting allows you to password protect the images  
that are saved in memory. No one can review the images without  
entering a password.  
Shutter Sound: The shutter sound allows you to select between 7  
different shutter sounds. The shutter sound is heard when you take a  
picture.  
Quality: The quality allows you to select between Fine and Normal.  
These settings dictate the image quality settings for the pictures.  
Help: Allows you to display the photo help file. The photo help file  
gives simple instructions of how to take pictures using the full-color  
digital camera.  
Camera  
90  
   
The Basics  
Using Voicemail  
Using Caller ID  
Responding to Call Waiting  
Making a Three-Way Call  
Using Call Forwarding  
The Basics 91  
 
Using Voicemail  
Setting Up Your Voicemail  
All unanswered calls to your phone are automatically transferred to voicemail,  
even if your phone is in use or turned off. Therefore, you will want to set up  
your Voicemail and personal greeting as soon as your phone is activated.  
To set up voicemail:  
1. Press and hold  
.
2. Follow the system prompts to create your passcode, record your  
greeting, and record your name announcement.  
Note: You must request this feature from your service provider for it to work  
correctly.  
Note: The voicemail setup process may vary in certain Affiliate areas.  
Voicemail Notification  
There are several ways your phone alerts you:  
By displaying a message on the screen.  
By sounding the assigned ringer type.  
By multi-colored LED turning On.  
By displaying  
at the top of your screen.  
New Voicemail Message Alerts  
When you receive a new voice message, your phone alerts you and prompts you to  
call your voicemail. To call your voicemail, press and  
hold  
.
Important: When you are roaming, you may not receive notification of new  
voicemail messages. It is recommended that you periodically check your voicemail  
by dialing 1 + area code + your Phone Number. Roaming rates will apply to all calls.  
92  
The Basics  
           
Retrieving Your Voicemail Messages  
You can review your messages directly from your phone or from any other  
touch-tone phone. To dial from your phone, you can either speed dial your  
voicemail or use the menu keys.  
Using One-Touch Message Access:  
Press and hold  
. Follow the system prompts.  
Using the Menu Keys on Your Phone to Access Your Messages:  
1. Press  
2. Press  
3. Press  
4. Press  
5. Press  
for Main Menu.  
for Messaging.  
for Voice Mail.  
for Inbox.  
for Connect.  
Note: You are charged for airtime minutes when you are accessing your voicemail  
from your phone.  
Using a Phone Other Than Your Wireless Phone to Access Messages:  
1. Dial your wireless phone number.  
2. When your voicemail answers, press  
.
3. Enter your passcode.  
Clearing the Voice Mail Count  
Your phone may temporarily continue to display the message icon after you  
have checked your voice and text messages.  
To clear the icon from the display screen:  
1. Press  
2. Press  
3. Press  
4. Press  
for Main Menu.  
for Messaging.  
for Voice Mail.  
for Clear VM Count.  
The Basics 93  
       
Using Caller ID  
Caller ID lets people know who’s calling by displaying the number of the  
person calling.  
To block your phone number from being displayed for a specific outgoing call:  
1. Press  
2. Enter the number you want to call.  
3. Press  
.
.
To permanently block your number, call Customer Service.  
Responding to Call Waiting  
When you’re on a call, Call Waiting alerts you to incoming calls by sounding  
two beeps. Your phone’s screen informs you that another call is coming in  
and displays the caller’s phone number (if it is available and you are in digital  
mode).  
To respond to an incoming call while you’re on a call:  
Press  
ond call.)  
To switch back to the first caller:  
. (This puts the first caller on hold and answers the sec-  
Press again.  
Tip: For those calls where you don’t want to be interrupted, you can temporarily  
disable Call Waiting by pressing  
before placing your call. Call Waiting is  
automatically reactivated once you end the call.  
Making a Three-Way Call  
With Three-Way Calling, you can talk to two people at the same time. When  
using this feature, the normal airtime rates will be charged for each of the two  
calls.  
1. Enter a number you wish to call and press  
.
2. Once you have established the connection, press  
for  
3-Way Call.  
3. Dial the second number and press  
.
94  
The Basics  
               
4. When you’re connected to the second party, press  
again to  
begin your three-way call.  
If one of the people you called hangs up during your call, you and the  
remaining caller stay connected. If you initiated the call and are the first to  
hang up, all three callers are disconnected.  
Tip: You can also begin a Three-Way Call by displaying a phone number stored in  
your Internal Phone Book, Call History, or Messaging. To call the third party, press  
.
Note: Call Waiting and Three-Way Calling are not available while roaming.  
Using Call Forwarding  
Call Forwarding lets you forward all your incoming calls to another phone  
number – even when your phone is turned off. You can continue to make calls  
from your phone when Call Forwarding is activated.  
To Activate Call Forwarding  
1. Press  
.
2. Enter the area code and phone number to which your future calls  
should be forwarded.  
3. Press  
. You will see a message and hear a tone to confirm the  
activation of Call Forwarding.  
To Deactivate Call Forwarding  
1. Press  
.
2. Press  
. You will see a message and hear a tone to confirm the  
deactivation.  
Note: You are charged a higher rate for calls you have forwarded.  
The Basics 95  
   
Data/Fax  
Your phone is capable of sending and receiving digital data and fax calls when  
connected to a computing device (laptop, desktop, hand held, palmtop, etc.)  
running the Windows or Windows NT operating system. Your phone  
functions similar to a typical modem on your PC, enabling you to use wireless  
data involving a wide variety of Windows applications.  
To use digital data or fax services with your phone, you will need to obtain a  
digital data/fax kit from your service provider. This kit contains the necessary  
cables, software, and documentation required for you to connect and use  
your phone with your computing device.  
Data/Fax setup  
1. Press  
2. Press  
3. Press  
4. Press  
for Main Menu.  
for Setup.  
for Others.  
for Connection.  
5. Press the navigation key up or down to select Voice Only, Fax in  
Only, Data in Only, Fax in Once, or Data in Once.  
6. Press  
to save.  
Voice Only: No incoming Data/Fax calls can be received.  
Fax in Only: No Voice Calls can be received. Only allows  
incoming Fax transmissions.  
Data in Only: No voice calls can be received. Only allows  
incoming data transmissions.  
Fax in Once: No Voice Calls can be received. Allows one  
incoming Fax transmission.  
Data in Once: No voice calls can be received. Only allows one  
incoming data transmission.  
Receiving a fax  
1. Press  
for Main Menu.  
for Setup.  
2. Press  
3. Press  
for Others.  
96  
The Basics  
             
4. Press  
5. Press the navigation key up or down and select Fax in Only.  
6. Press to save.  
for Connection.  
In the Fax program on your PC, configure the Answer Mode. Click Receive  
and select either Automatic Receive (recommended) or Manual Receive.  
Your phone is ready to receive an incoming fax.  
Note: Once you have set your phone’s mode to fax for next call, you cannot receive  
regular voice calls until you change back to voice calls only, or a fax is received.  
Ending a Fax or Data Call  
Some common ways to end a call, like closing the phone, will not end a fax or  
data call. Always disconnect the connection through the application on your  
computer, which returns your phone to standby mode. Disconnecting the data  
cable or turning off your phone will also end a data or fax call, but it may  
disrupt your computer.  
Sending a Fax or Data File  
When connected to a computing device, your phone allows wireless fax and  
data transmissions. Your computing device software initiates the call to the  
destination phone number. Your phone functions as a wireless modem to  
send the Fax or Data file to the number designated by your PC software.  
Changing your phone back to voice calling  
1. Press  
2. Press  
3. Press  
4. Press  
for Main Menu.  
for Setup.  
for Others.  
for Connection.  
5. Press the navigation key up or down and select Voice Only.  
6. Press to Select.  
Note: “No incoming data/fax calls can be received.” appears on the display.  
The Basics 97  
             
Messaging  
Message Types  
Text Messaging  
Picture Messaging  
Messaging  
98  
   
Messaging  
Messaging now consists of pictures, text, and voicemail capabilities. Picture  
messages can be sent to another picture message capable phone or an email  
address. Picture messages can also contain text, pictures, and a voice  
attachment.  
Text messaging allows you to send text messages to another text messaging  
capable phone.  
Text Messaging  
Using Text Messaging  
With Text Messaging, you can use a person’s wireless phone number to send  
instant text messages from your web enabled phone to their messaging-ready  
phone – and they can send messages to you. When you receive a new  
message, you’ll automatically be notified with a one-way text message.  
In addition, messaging includes a variety of pre-set messages, such as “I’m  
running late, I’m on my way,” that make composing messages fast and easy.  
The following folders are available:  
Send Message - Allows you to create and send a new text  
message.  
Inbox - allows you to view email messages in the Inbox.  
Outbox - contains a copy of outgoing messages.  
Web MSG - allows you to review a new web message.  
Saved - allows you to store saved messages.  
Erase MSG - allows you to delete messages stored in the any of  
the folders listed above or all folders at once.  
MSG Settings - allows you to configure text messaging  
options.  
To send a text message:  
1. Press  
2. Press  
3. Press  
4. Press  
for Main Menu.  
for Messaging.  
for Text MSG.  
for Send Message  
Messaging  
99  
         
5. Enter the phone number or email address of the person to whom  
you’re sending a message and press  
6. Enter your message using the keypad. Press  
desired character format. Press when finished.  
7. Press to send.  
.
to select the  
Sending Options  
When you are sending a new text message, there are options associated with  
the new message. These options allow you to configure the following:  
Priority - allows you to set the priority level between Normal  
and Urgent.  
Validity - allows you to configure the amount of time a  
message is good before it can no longer be read by the  
recipient. If the message is not read in the time allotted, it is  
cancelled.  
Send Later - allows you to time delay the sending of a message  
using one of the preset time limits.  
Delivery Ack - requests that a delivery acknowledgment is  
sent upon reading the new message.  
Message Save - allows you to configure the Auto-Save, Do Not  
Save, or Prompt Save options for the new message.  
To read a Text Message:  
1. When you receive a text message, you will see “New Text Message”  
on your display screen. Select OK.  
To reply to a Text Message:  
1. While the message is open, select Menu Reply.  
2. Compose your reply or use canned messages.  
Use your keypad to type a message. Use the right softkey to  
select a character input mode.  
To use canned messages press  
for Canned Msg.  
Press the corresponding number on the keypad to enter the  
canned message response.  
Messaging  
100  
3. Press  
.
4. Press  
to Send.  
Erasing Messages  
You can erase messages at anytime from the Inbox, Outbox, or Saved  
message folders. To erase the messages from the desired folder:  
1. Press  
2. Press  
3. Press  
4. Press  
5. Press  
for Main Menu.  
for Messaging.  
for Text MSG.  
for Erase MSG.  
for Inbox,  
for Outbox, or  
for Saved.  
Erasing All Text Messages  
To erase all messages:  
1. Press  
2. Press  
3. Press  
4. Press  
5. Press  
for Main Menu.  
for Messaging.  
for Text MSG.  
for Erase.  
for All Messages.  
6. Press the navigation key up or down to select one of the following  
options:  
No - Cancels the deletion.  
Yes - Deletes all messages.  
7. Press  
.
Message Setup Options  
There are several options associated with text messaging. The Message Setup  
menu allows you to customize the options to fit your preferences. The  
message options are divided into the following categories:  
General: allows to configure the scroll timer and  
MSG Reminder.  
Messaging  
101  
           
New Message: allows you to configure Callback #, Save  
Message, Entry Method, Delivery Acknowledgment, and  
Canned Messages.  
To access the MSG Setup menu:  
1. Press  
2. Press  
3. Press  
4. Press  
5. Press  
for Main Menu.  
for Messaging.  
for Text MSG.  
for MSG Settings.  
for General or  
for New Message.  
General Options  
The following options are available in the General Option settings. These  
options allow you to customize options associated with messaging.  
Scroll Timer  
The scroll timer allows you to set the duration of the scroll before it closes in  
the message screen. To access the scroll timer:  
1. Press  
2. Press  
3. Press  
4. Press  
5. Press  
6. Press  
for Main Menu.  
for Messaging.  
for Text MSG.  
for MSG Settings.  
for General.  
for Scroll Timer.  
7. Press the navigation key up or down to select the desired duration  
and press  
to Select.  
Message Reminder  
This option allows you to configure how often you are notified of new text  
messages that are waiting. To access message reminder:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Messaging.  
for Text MSG.  
Messaging  
102  
   
4. Press  
5. Press  
6. Press  
for MSG Settings.  
for General.  
for MSG Reminder.  
7. Press the navigation key up or down to select the desired duration  
and press to Select.  
New Message Options  
The following options are available in the New Message option settings. These  
options allow you to customize options associated with text messages.  
Callback Number  
The Callback Number option allows you to insert a callback number that is  
automatically sent with all new text messages. To access callback number:  
1. Press  
2. Press  
3. Press  
4. Press  
5. Press  
6. Press  
for Main Menu.  
for Messaging.  
for Text MSG.  
for MSG Settings.  
for New Message.  
for Callback #.  
7. Press and hold  
to clear the number. Enter the new number  
using your keypad.  
8. Press  
to Save.  
Save Message  
Allows you to configure the auto save options for outgoing text messages.  
You can select one of the following options:  
Do Not Save - does not save a copy of the outgoing message.  
Prompt Save - prompts you to save a copy of the outgoing  
message.  
Auto Save - automatically saves a copy of the outgoing  
message in the filed folder.  
To access save message:  
Messaging  
103  
   
1. Press  
2. Press  
3. Press  
4. Press  
5. Press  
6. Press  
for Main Menu.  
for Messaging.  
for Text MSG.  
for MSG Settings.  
for New Message.  
for Save Message.  
7. Press the navigation key up or down to select the desired option  
and press to Select.  
Entry Method  
The Entry Method allows you to set the default character input method for  
new text messages. You can select between T9 Word or Alphabet mode. The  
T9 Word setting is a predictive text entry mode, while the alphabet setting is  
the standard keypad entry mode. To access Entry Method:  
1. Press  
2. Press  
3. Press  
4. Press  
5. Press  
6. Press  
for Main Menu.  
for Messaging.  
for Text MSG.  
for MSG Settings.  
for New Message.  
for Entry Method.  
7. Press the navigation key up or down to select the desired input  
method and press  
to Select.  
Delivery Acknowledgment  
The Delivery Acknowledgment option allows you to have a return message  
sent back notifying you that the message was received and read by the  
recipient. This option can be turned On or Off in the settings. To access the  
delivery acknowledgment setting:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Messaging.  
for Text MSG.  
Messaging  
104  
4. Press  
5. Press  
6. Press  
for MSG Settings.  
for New Message.  
for Delivery Ack.  
7. Press the navigation key up or down to select On or Off and press  
to Select.  
Canned Messages  
Canned messages are used to enter common responses to questions. A  
canned message can be selected and automatically entered into the message.  
Canned messages can also be customized to whatever you want by editing  
the 10 pre-set messages already stored in your phone. To edit a canned  
message:  
1. Press  
2. Press  
3. Press  
4. Press  
5. Press  
6. Press  
for Main Menu.  
for Messaging.  
for Text MSG.  
for MSG Settings.  
for New Message.  
for Canned MSG.  
7. Highlight the desired message and press  
8. Press and hold to erase the message. Enter your new  
message or changes and press to Save.  
.
Picture Messaging  
Your phone gives you the ability to take pictures, view them using the phone's  
display, and instantly send them to your friends and family. It's as easy to use  
as a traditional point-and-click camera. In addition to sending your pictures to  
friends and family, you can also send them to a Picture Messaging Web site  
for storage. Cameras can take and store pictures and the image quality is  
similar to what you see on your computer screen.  
Messaging  
105  
   
Sending Picture Messaging to Others from your Phone  
1. Press  
2. Press  
3. Press  
4. Press  
5. Press  
for Main Menu.  
for Messaging.  
for Picture MSG.  
for Send Message.  
for edit and enter a Caption for the picture using the  
keypad. When finished, press  
.
6. Press  
for Add Image.  
7. Press the navigation key left or right until the desired image is  
displayed and press to select.  
8. Press the navigation key down until Add sound is highlighted and  
press  
to select.  
9. Press  
for Voice Record.  
10. Record your message and press  
when finished.  
11. If satisfied with the message, press  
for Attach.  
12. Enter a name for the sound using the keypad and press  
.
13. Press  
14. Press  
15. Press  
again to attach the memo.  
for Next.  
to select an email address or phone number from the  
address book.  
— Or —  
Press the Navigation key down to highlight the address field and press  
to enter a web enabled phone number or email address.  
Note: You can enter multiple email addresses or phone numbers by separating the  
entries with a space or by selecting entries from your phone book.  
16. When you are finished entering recipients, press  
17. Press for Send.  
.
Messaging  
106  
 
Advanced Send Options  
There are a number of advanced sending options associated with picture  
messaging. These options are:  
Reports - This option allows you to attach a Read Receipt to the  
outgoing message. When the message is received by the  
recipient, a message is returned to notify you that the message  
was read.  
Message Title - This option allows you to attach a message  
title to the message.  
Priority & Class - This option allows you to set a priority level  
of low, normal, or high. It also allows you to set a message  
class to personal, advertisement, or informational.  
Cc and Bcc - Allows you to Cc (carbon copy) and Bcc (blind  
carbon copy) the message to another email address or mobile  
number. If the Bcc is used, the other recipients do not see the  
email address or phone number of the Bcc recipient, it is  
hidden.  
To access the advanced settings:  
1. Before sending the picture message, press  
for  
for Priority  
Advanced.  
2. Press  
& Class, or  
for Reports,  
for Message Title,  
for Cc and Bcc.  
Messaging  
107  
Do More Web Services  
Wireless Web  
Sounds  
Images  
Games  
Tools  
Applications  
Web Services  
108  
 
The Wireless Web  
Your phone comes equipped with Wireless Web access through your  
browser. You can view specially designed version of popular sites which  
includes sports, weather, news, stock quotes etc…as well as downloadable  
ringtones, wallpapers and images. When you launch the browser, the phone  
will connect to the Internet and the service indicator icon will display.  
Launching the Browser  
To launch a web connection:  
1. Press  
2. Press  
3. Press  
for Main Menu.  
for Do More.  
for Wireless Web.  
4. Your web connection will launch and the Mobile Web Home page.  
Shortcut: You can also press and hold the center of the navigation key down to  
launch the Web.  
If you had a previous web connection, the last page you visited will display  
when you launch your browser, for example, Short Mail or ESPN Top News.  
When this occurs, you may not see the "Connecting as..." message when you  
launch the session. Though the browser is open, you are not currently in an  
active data session - that is, no data is being sent or received. As soon as you  
navigate to another page, the active session will launch and you will see the  
"Connecting" message.  
Web Services  
109  
     
Web Connection Status and Indicators  
Your phone's display lets you know the current status of your web connection  
through indicators which appear at the top of the screen. The following  
symbols are used:  
Your web connection is active (data is being transferred). Incoming  
voice calls go directly to voicemail; outgoing voice calls can be made,  
but the web connection will terminate.  
Your web connection is dormant (no data is being sent or received).  
Though not currently active, when dormant the phone can restart an  
active connection quickly; voice calls can be made and received.  
You are receiving data when the down arrow is illuminated.  
You are transmitting data when the up arrow is illuminated.  
Navigating the Wireless Web  
Navigating through menus and Web sites during a web session is easy once  
you've learned a few basics. Here are some tips for getting around:  
Softkeys  
When browsing the Web, the bottom line of your phone's display contains  
one or more softkeys. These keys are shortcut controls for navigating around  
the Web, and they correspond to the softkey buttons directly below the  
phone’s display screen. Depending on which Web sites you visit, the labels on  
the softkeys may change to indicate their function.  
To use softkeys, simply press the desired softkey button. If an additional pop-  
up menu appears when you press the softkey button, select the menu items  
using your keypad (if they’re numbered) or by highlighting the option and  
pressing  
.
Scrolling  
As with other parts of your phone's menu, you'll have to scroll up and down  
to see everything on some Web sites.  
Press the navigation key up and down to scroll line by line or press  
the volume buttons on the side of the phone to scroll one page at a  
time.  
Web Services  
110  
     
Selecting  
Once you've learned how to use softkeys and scroll, you can start navigating  
Web sites.  
Select on-screen items by using the navigation key to highlight the  
desired item, then press the desired softkey button (or press  
).  
You'll find that the left softkey is used primarily for selecting items.  
If the items on a page are numbered, you can use your keypad  
(number keys) to select an item.  
Links, which appear as underlined text, allow you to jump to different Web  
pages, select special functions, or even place phone calls.  
Select links by highlighting the link and then selecting the appropriate  
softkey.  
Tip: The tenth item in a numbered list may be selected by pressing  
the  
key on your phone’s keypad, even though the number 0 doesn’t appear  
on the screen.  
Going Back  
To go back one page, press  
on your phone. (Note that  
is also  
used for deleting text (like a BACKSPACE key) when you are entering  
text.)  
Going Home  
To return to the Home page from any other Web page, press and hold  
the center of the navigation key.  
In addition to the features already covered in this section, the web home page  
offers always-on access to these colorful, graphically rich Web categories.  
Many sites are available under more than one menu – choose the one that's  
most convenient for you.  
Note: The home page is subject to change by the service provider.  
Web Services  
111  
Downloading Do More Content  
With your new web enabled phone, you have access to a variety of services  
such as downloadable Games, Ringers, and Wallpapers. While each type of  
download involves a different file type, the basic method for accessing and  
downloading files is the same.  
Sounds  
Allows you to download ringtones and sound clips from the web. Once  
downloaded, the ringtones and sound clips are stored in the phone.  
Ringtones  
Downloading Ringtones  
To download an available ringer to your phone:  
1. Press  
2. Press  
for Do More.  
for Sounds.  
3. Highlight Get New and press  
. The browser will launch and  
take you to the Ringtones download menu.  
4. Use your navigation key to highlight and select a  
ringer you wish to download. (For more information on navigating  
the Web, see “Navigating the Wireless Web” on  
Assigning Downloaded Ringers  
Downloaded ringers may be assigned directly from the Downloads menu and  
are also available through the Setup menu.  
To assign a downloaded ringer through the Setup menu, see “Selecting  
Ringer Types for Voice Calls” on page 22 or “Selecting Ringer Types for  
Messages” on page 23.  
To assign a downloaded ringer from the Downloads menu:  
1. Press  
2. Press  
for Do More.  
for Sounds.  
3. Use the navigation key to highlight Ringtones and  
press  
.
4. Use the navigation key to select the desired ringtone.  
Web Services  
112  
         
5. Press  
6. Press  
7. Press  
8. Press  
for Assign.  
for Voice Calls.  
for With Caller ID or  
to exit.  
for No Caller ID.  
Note: You may assign a ringer to more than one type of call.  
Erasing Downloaded Ringers  
It may become necessary to erase ringers to free up available memory. This  
will allow you to download other content or new ringers. To erase ringers:  
1. Press  
2. Press  
for Do More.  
for Sounds.  
3. Use the navigation key to highlight Ringtones and  
press  
4. Use the navigation key to select the desired ringtone.  
.
5. Press  
:
for Erase.  
for Erase All.  
Sound Clips  
Sound Clips is a folder where recorded voice memos and voice attachments  
from Picture MSG are stored.  
Erasing Sound Clips  
It may become necessary to erase sound clips to free up available memory.  
This will allow you to download other content or new sound clips. To erase:  
1. Press  
2. Press  
for Do More.  
for Sounds.  
3. Use the navigation key to highlight Sound Clips and  
press  
.
4. Press  
:
Web Services  
113  
 
for Erase.  
for Erase All.  
Images  
Wallpaper  
Wallpaper allows you to download images from the web and assign them to  
your idle screen. Pictures taken with your built-in digital camera can also be  
used as wallpaper. For more information on using pictures for wallpaper, see  
Downloading Wallpaper  
To download an available Screen Saver to your phone:  
1. Press  
2. Press  
for Do More.  
for Images.  
3. Highlight Get New and press  
. The browser will launch and  
take you to the Wallpapers download menu. (For more information  
on navigating the Web, see “Navigating the Wireless Web” on page  
110.)  
Note: You may store a limited number of downloaded Wallpapers on your phone,  
depending on the file sizes.  
Assigning Downloaded Wallpapers  
Downloaded Wallpapers may be assigned directly from  
the Downloads menu and are also available through the  
Setup menu.  
To assign a downloaded wallpaper through the Setup menu, see “Changing  
the Display Screen” on page 21.  
To assign a downloaded wallpaper from the Downloads menu:  
1. Press  
2. Press  
for Do More.  
for Images.  
3. Use the navigation key to highlight Wallpaper and  
press  
.
Web Services  
114  
       
4. Use the navigation key to select the desired wallpaper.  
5. Press for Assign.  
Note: You may assign a wallpaper to more than one task.  
Erasing Wallpaper  
It may become necessary to erase wallpaper images to free up available  
memory. This will allow you to download other content or new wallpaper. To  
erase:  
1. Press  
2. Press  
for Do More.  
for Images.  
3. Use the navigation key to highlight Wallpaper and  
press  
4. Press the navigation key left or right to select the desired wallpaper  
.
and press  
:
for Erase.  
for Erase All.  
Picture Album  
Picture Album allows you to assign a picture to a Screen Saver, Picture ID, or  
an Incoming Call. It also allows you to send the image to another picture  
phone or upload the image to a picture album on the web.  
Assign a Picture  
1. Press  
2. Press  
for Do More.  
for Images.  
3. Use the navigation key to highlight Picture Album and  
press  
4. Press the navigation key left or right to select the desired image.  
5. Press for Assign.  
.
Web Services  
115  
 
6. Press  
for Wallpaper,  
for Picture ID, or  
for  
Incoming Call.  
Note: If you select Picture ID or Incoming Call, follow the directions on-screen to  
assign the picture.  
Send Picture  
1. Press  
2. Press  
for Do More.  
for Images.  
3. Use the navigation key to highlight Picture Album and press  
.
4. Press the navigation key left or right to select the desired image.  
5. Press  
for Send To.  
6. Press  
for Edit and enter the Caption text.  
Note: If you have entered text in previous messages, they may still be available.  
Press the navigation key down to display a list of previous caption text messages.  
Highlight the desired text entry and press  
.
7. Press  
when finished.  
8. Press the navigation key down until Add sound is highlighted and  
press  
to select.  
9. Press  
for Voice Record.  
10. Record your message and press  
when finished.  
11. If satisfied with the message, press  
for Attach.  
12. Enter a name for the sound using the keypad and press  
.
13. Press  
again to attach the memo.  
14. Press  
for Next.  
Web Services  
116  
15. Press  
to select an email address or phone number from the  
address book.  
— Or —  
Press the Navigation key down to highlight the address field and press  
to enter a web enabled phone number or email address.  
16. When you are finished entering recipients, press  
.
17. Press  
for Send.  
Upload a Picture  
1. Press  
for Do More.  
2. Press  
for Images.  
3. Use the navigation key to highlight Picture Album and  
press  
4. Press the navigation key left or right to select the desired image.  
.
5. Press  
for Upload.  
Erasing an Image  
1. Press  
for Do More.  
2. Press  
for Images.  
3. Use the navigation key to highlight Picture Album and  
press  
4. Press the navigation key left or right to select the desired image.  
5. Press for Erase.  
.
Games  
You can play a variety of entertaining and graphically-rich games on your  
phone. New games are easy to download and play.  
Downloading Games  
1. Press  
for Do More.  
Web Services  
117  
   
2. Press  
for Games.  
3. Highlight Get New and press  
. The browser will launch and  
take you to the download menu.  
4. Use your navigation key to highlight and select a game you wish to  
download. (For more information on navigating the Web, see  
“Navigating the Wireless Web” on page 110.)  
Playing Games  
To play a downloaded game on your phone:  
1. Press  
2. Press  
for Do More.  
for Games.  
3. Highlight the game you wish to play and press  
4. Follow the on-screen instructions to play the game. When you are  
finished, select Exit (or Quit) or press  
.
.
Game Pad  
The optional Game Pad accessory allows you to insert your phone into a  
convenient handheld gaming device to control the action of downloaded  
games. Large buttons and navigation controls allow you to navigate easily  
through the phone’s menu system. When your phone is inserted correctly into  
the Game Pad, a “Digital Game Pad is Attached” message is displayed on-  
screen.  
The game pad default keys are mapped to the phone’s key pad.  
To modify the mapping:  
1. Press  
2. Press  
3. Press  
4. Press  
for Setup.  
for Others.  
for Game Pad.  
for Key Remap.  
for Cursor Key,  
5. Press  
for Fire Key, or  
for Other  
Key.  
Web Services  
118  
Tools  
You can download a variety of tools from the web.  
Downloading Tools  
1. Press  
2. Press  
for Do More.  
for Tools.  
3. Highlight Get New and press  
. The browser will launch and  
take you to the download menu.  
4. Use your navigation key to highlight and select a tool you wish to  
download. (For more information on navigating the Web, see  
“Navigating the Wireless Web” on page 110.)  
Using Tools  
1. Press  
2. Press  
3. Highlight the tool you wish to launch and press  
for Do More.  
for Tools.  
.
Applications  
You can download a variety of applications from the web.  
Downloading Applications  
1. Press  
for Do More.  
2. Press  
for Applications.  
3. Highlight Get New and press  
. The browser will launch and  
take you to the download menu.  
4. Use your navigation key to highlight and select a application you  
wish to download. (For more information on navigating the Web,  
see “Navigating the Wireless Web” on page 110.)  
Launching Applications  
1. Press  
for Do More.  
2. Press  
for Applications.  
Web Services  
119  
   
3. Highlight the application you wish to launch and  
press  
.
Memory Management  
Your phone has 3000K of available memory for Pictures, Voice Memo’s,  
Picture Messaging, and Downloads (JAVA games, ring tones and wallpapers).  
To check the memory usage:  
Press  
.
If the memory is full, you may want to erase existing content to free up  
additional memory. To erase downloads, go to the Do More menu and select  
the folder you want to delete from. Select the object and then select Erase  
from the available menu.  
If the memory is full and you are trying to download content to the phone  
(send/receive Picture MSG, take picture, or create voice memo) you will be  
prompted with a memory full management popup message with the option to  
delete existing content.  
Web Services  
120  
 
Safety  
Getting the Most Out of Your Reception  
Maintaining Safe Use of and Access to Your Phone  
Caring for the Battery  
Acknowledging Special Precautions and Industry Canada Notice  
Safety 121  
 
Getting the Most Out of Your Reception  
Keeping Tabs on Signal Strength  
The quality of each call you make or receive depends on the signal strength in  
your area. Your phone informs you of the current signal strength by  
displaying a number of bars next to the signal strength icon. The more bars  
displayed, the stronger the signal. If you’re inside a building, being near a  
window may give you better reception.  
Understanding the Power Save Feature  
If your phone is unable to find a signal after 15 minutes of searching, a Power  
Save feature is automatically activated. If your phone is active, it periodically  
rechecks service availability or you can check it yourself by pressing any key.  
Anytime the Power Save feature is activated, a message displays on the screen.  
When a signal is found, your phone returns to standby mode.  
Understanding How Your Phone Operates  
Your phone is basically a radio transmitter and receiver. When it’s turned on, it  
receives and transmits radio frequency (RF) signals. When you use your  
phone, the system handling your call controls the power level. This power can  
range from 0.006 watts to 0.2 watts in digital mode.  
Knowing Radio Frequency Safety  
The design of your phone complies with updated NCRP standards described  
below. In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE)  
and the American National Standards Institute (ANSI) joined in updating  
ANSI’s 1982 standard for safety levels with respect to human exposure to RF  
signals. More than 120 scientists, engineers and physicians from universities,  
government health agencies and industries developed this updated standard  
after reviewing the available body of research. In 1993, the Federal  
Communications Commission (FCC) adopted this updated standard in a  
regulation. In August 1996, the FCC adopted hybrid standard consisting of the  
existing ANSI/IEEE standard and the guidelines published by the National  
Council of Radiation Protection and Measurements (NCRP).  
Maintaining Your Phone’s Peak Performance  
There are several simple guidelines to operating your phone properly and  
maintaining safe, satisfactory service.  
122  
Safety  
 
Hold the phone with the antenna raised, fully-extended, and over your  
shoulder.  
Try not to hold, bend, or twist the phone’s antenna.  
Don’t use the phone if the antenna is damaged.  
Speak directly into the mouthpiece.  
Avoid exposing your phone and accessories to rain or liquid spills. If  
your phone does get wet, immediately turn the power off and remove  
the battery. If it’s inoperable, return it to a TELUS Store or call  
Customer Support for service.  
Note: For the best care of your phone, only TELUS authorized personnel should  
service your phone and accessories. Faulty service may void  
the warranty.  
Maintaining Safe Use of and Access to Your Phone  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO  
SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE  
Using Your Phone While Driving  
Talking on your phone while driving (or operating the phone without a hands-  
free device) is prohibited in some jurisdictions. Laws vary as to specific  
restrictions. Remember that safety always comes first.  
When using your phone in the car:  
Get to know your phone and its features, such as speed dial  
and re-dial.  
When available, use a hands-free device.  
Position your phone within easy reach.  
Let the person you are speaking to know you are driving; if necessary,  
suspend the call in heavy traffic or hazardous weather conditions.  
Do not take notes or look up phone numbers while driving.  
Dial sensibly and assess the traffic; if possible, place calls when  
stationary or before pulling into traffic.  
Safety 123  
 
Do not engage in stressful or emotional conversations that may divert  
your attention from the road.  
Dial 911 to report serious emergencies. It’s free from your wireless  
phone.  
Use your phone to help others in emergencies.  
Call roadside assistance or a special non-emergency wireless number  
when necessary.  
Following Safety Guidelines  
To operate your phone safely and efficiently, always follow  
any special regulations in a given area. Turn your phone off in areas where use  
is forbidden or when it may cause interference or danger.  
Using Your Phone Near Other Electronic Devices  
Most modern electronic equipment is shielded from radio frequency (RF)  
signals. However, RF signals from wireless phones may affect inadequately  
shielded electronic equipment.  
RF signals may affect improperly installed or inadequately shielded electronic  
operating systems and/or entertainment systems in motor vehicles. Check  
with the manufacturer or their representative to determine if these systems  
are adequately shielded from external RF signals. Also check with the  
manufacturer regarding any equipment that has been added to your vehicle.  
Consult the manufacturer of any personal medical devices, such as  
pacemakers and hearing aids, to determine if they are adequately shielded  
from external RF signals.  
Note: Always turn off the phone in health care facilities and request permission  
before using the phone near medical equipment.  
Turning Off Your Phone Before Flying  
Turn off your phone before boarding any aircraft. To prevent possible  
interference with aircraft systems, the U.S. Federal Aviation Administration  
(FAA) regulations require you to have permission from a crew member to use  
your phone while the plane is on the ground. To prevent any risk of  
interference,  
FCC regulations prohibit using your phone while the plane is in the air.  
124  
Safety  
Turning Off Your Phone in Dangerous Areas  
To avoid interfering with blasting operations, turn off your phone when in a  
blasting area or in other areas with signs indicating that two-way radios  
should be turned off. Construction crews often use remote-control RF devices  
to  
set off explosives.  
Turn off your phone when you’re in any area that has a potentially explosive  
atmosphere. Although it’s rare, your phone or its accessories could generate  
sparks. Sparks could cause an explosion or a fire resulting in bodily injury or  
even death. These areas are often, but not always, clearly marked. They  
include:  
Fueling areas such as gas stations.  
Below deck on boats.  
Fuel or chemical transfer or storage facilities.  
Areas where the air contains chemicals or particles such as grain, just  
or metal powders.  
Any other area where you would normally be advised to turn off your  
vehicle’s engine.  
Note: Never transport or store flammable gas, liquid or explosives in the  
compartment of your vehicle that contains your phone or accessories.  
Restricting Children’s Access to your Phone  
Your phone is not a toy. Children should not be allowed to play with it because  
they could hurt themselves and others, damage the phone or make calls that  
increase your phone bill.  
Caring for the Battery  
Protecting Your Battery  
The guidelines listed below help you get the most out of your battery’s  
performance.  
Use only Samsung approved batteries and desktop chargers. These  
chargers are designed to maximize battery life. Using other batteries or  
chargers voids your warranty and may cause damage.  
Safety 125  
 
In order to avoid damage, charge the battery only in temperatures that  
range from 32º F to 113º F (0º C to 45º C).  
Don’t use the battery charger in direct sunlight or in high humidity  
areas, such as the bathroom.  
Never dispose of the battery by incineration.  
Keep the metal contacts on top of the battery clean.  
Don’t attempt to disassemble or short-circuit the battery.  
The battery may need recharging if it has not been used for a long  
period of time.  
It’s best to replace the battery when it no longer provides acceptable  
performance. It can be recharged hundreds of times before it needs  
replacing.  
Don’t store the battery in high temperature areas for long periods of  
time. It’s best to follow these storage rules:  
Less than one month:  
4º F to 140º F (-20º C to 60º C)  
More than one month:  
4º F to 113º F (-20º C to 45º C)  
Disposal of Lithium Ion (LiIon) Batteries  
For safe disposal options of your LiIon batteries, contact your nearest TELUS  
service center.  
Special Note: Be sure to dispose of your battery properly. In some areas, the  
disposal of batteries in household or business trash may be prohibited.  
Note: For safety, do not handle a damaged or leaking LiIon battery.  
Acknowledging Special Precautions and Industry Canada Notice  
Only use approved batteries, antennas, and chargers. The use of any  
unauthorized accessories may be dangerous and will invalidate the phone  
warranty if said accessories cause damage or a defect to the phone.  
Although your phone is quite sturdy, it is a complex piece of hardware and  
can be broken. Use common-sense guidelines to avoid dropping, hitting,  
bending or sitting on it.  
126  
Safety  
   
Cautions  
Any changes or modifications to your phone not expressly approved in this  
document could void your warranty for this equipment, and void your  
authority to operate this equipment. Only use approved batteries, antennas  
and chargers. The use of any unauthorized accessories may be dangerous  
and void the phone warranty if said accessories cause damage or a defect to  
the phone.  
Although your phone is quite sturdy, it is a complex piece of equipment and  
can be broken. Avoid dropping, hitting, bending or sitting on it.  
Information to User  
This equipment has been tested and found to comply with the limits of a Class  
B digital device, pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation; if this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
Reorient / relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit difference  
from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Specific Absorption Rates (SAR) for Wireless Phones  
The SAR is a value that corresponds to the relative amount of RF energy  
absorbed in the head of a user of a wireless handset.  
The SAR value of a phone is the result of an extensive testing, measuring and  
calculation process. It does not represent how much RF the phone emits. All  
phone models are tested at their highest value in strict laboratory settings.  
But when in operation, the SAR of a phone can be substantially less than the  
level reported to the FCC. This is because of a variety of factors including its  
proximity to a base station antenna, phone design and other factors. What is  
Safety 127  
 
important to remember is that each phone meets strict federal guidelines.  
Variations in SARs do not represent a variation in safety.  
All phones must meet the federal standard, which incorporates a substantial  
margin of safety. As stated above, variations in SAR values between different  
model phones do not mean variations in safety. SAR values at or below the  
federal standard of 1.6 W/kg are considered safe for use by the public.  
The highest reported SAR values of the [SCH-A600] are:  
AMPS mode (Part 22) - Head: 1.04 W/kg; Body-worn: 0.821 W/kg  
Digital mode (Part 24) - Head: 0.889 W/kg; Body-worn: 1.440 W/kg  
Owner’s Record  
The model number, regulatory number and serial number are located on a  
nameplate inside the battery compartment. Record the serial number in the  
space provided below. This will be helpful if you need to contact us about your  
phone in the future.  
Model: SCH-a600  
Serial No.:  
User Guide Proprietary Notice  
CDMA Technology is licensed by QUALCOMM Incorporated under one or  
more of the following patents:  
4,901,307 5,109,390 5,267,262 5,416,797  
5,506,865 5,544,196 5,657,420 5,101,501  
5,267,261 5,414,796 5,504,773 5,535,239  
5,600,754 5,778,338 5,228,054 5,337,338  
5,710,784 5,056,109 5,568,483 5,659,569  
5,490,165 5,511,073  
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat.  
5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents  
pending.  
128  
Safety  
   
Manufacturer’s Warranty  
Manufacturer’s Warranty  
Warranty 129  
 
Manufacturer’s Warranty  
STANDARD LIMITED WARRANTY  
What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, L.P.  
("SAMSUNG") warrants to the original purchaser ("Purchaser") that SAMSUNG's Phones and  
accessories ("Products") are free from defects in material and workmanship under normal use and  
service for the period commencing upon the date of purchase and continuing for the following  
specified period of time after that date:  
Phone  
1 Year  
Batteries  
1 Year  
Leather Case/Pouch/Holster  
Game Pad  
90 Days  
90 Days  
1 Year  
Other Phone Accessories  
What is Not Covered? This Limited Warranty is conditioned upon proper use of Product by Purchaser.  
This Limited Warranty does not cover: (a) defects or damage resulting from accident, misuse, abuse,  
neglect, unusual physical, electrical or electromechanical stress, or modification of any part of Product,  
including antenna, or cosmetic damage; (b) equipment that has the serial number removed or made  
illegible; (c) any plastic surfaces or other externally exposed parts that are scratched or damaged due to  
normal use; (d) malfunctions resulting from the use of Product in conjunction with accessories,  
products, or ancillary/peripheral equipment not furnished or approved by SAMSUNG; (e) defects or  
damage from improper testing, operation, maintenance, installation, or adjustment; (f) installation,  
maintenance, and service of Product, or (g) Product used or purchased outside the United States or  
Canada. This Limited Warranty covers batteries only if battery capacity falls below 80% of rated  
capacity or the battery leaks, and this Limited Warranty does not cover any battery if (i) the battery has  
been charged by a battery charger not specified or approved by SAMSUNG for charging the battery, (ii)  
any of the seals on the battery are broken or show evidence of tampering, or (iii) the battery has been  
used in equipment other than the SAMSUNG phone for which it is specified.  
What are SAMSUNG's Obligations? During the applicable warranty period, SAMSUNG will repair or  
replace, at SAMSUNG's sole option, without charge to Purchaser, any defective component part of  
Product. To obtain service under this Limited Warranty, Purchaser must return Product to an  
authorized phone service facility in an adequate container for shipping, accompanied by Purchaser's  
sales receipt or comparable substitute proof of sale showing the date of purchase, the serial number of  
Product and the sellers' name and address. To obtain assistance on where to deliver the Product, call  
Samsung Customer Care at 1-888-987-4357. Upon receipt, SAMSUNG will promptly repair or replace  
the defective Product. SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new  
parts or components when repairing any Product or replace Product with a rebuilt, reconditioned or  
130  
Warranty  
   
new Product. Repaired/replaced leather cases, pouches and holsters will be warranted for a period of  
ninety (90) days. All other repaired/replaced Product will be warranted for a period equal to the  
remainder of the original Limited Warranty on the original Product or for 90 days, whichever is longer.  
All replaced parts, components, boards and equipment shall become the property of SAMSUNG. If  
SAMSUNG determines that any Product is not covered by this Limited Warranty, Purchaser must pay all  
parts, shipping, and labor charges for the repair or return of such Product.  
What Are the Limits On SAMSUNG's Liability? EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY  
CONTAINED HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND SAMSUNG MAKES NO  
WARRANTY OR REPRESENTATION AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED,  
STATUTORY OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,  
INCLUDING BUT NOT LIMITED TO:  
"THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR  
USE;  
"WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
"DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;  
"THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR  
"COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION  
OR CONTRACT PERTAINING THERETO.  
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN  
EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL  
IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION OF LAW, INCLUDING  
IF APPLICABLE THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS  
WRITTEN WARRANTY STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS  
ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO  
YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND  
RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE PRODUCT OR  
ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF USE OF THE PRODUCT OR FROM  
THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL  
OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES  
ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT  
COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT  
OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME STATES/  
PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR  
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO  
YOU.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER  
RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED  
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS  
PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED  
WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL  
ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE  
REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL  
ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.  
Warranty 131  
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-PARTY SOFTWARE OR  
EQUIPMENT IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO WARRANTIES OR  
REPRESENTATIONS AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR  
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY  
OF ANY THIRD-PARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE,  
INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE  
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY  
SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE  
DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS  
THE CASE MAY BE.  
This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and  
SAMSUNG's Product pricing reflects this allocation of risk and the limitations of liability contained in  
this Limited Warranty. The agents, employees, distributors, and dealers of SAMSUNG are not authorized  
to make modifications to this Limited Warranty, or make additional warranties binding on SAMSUNG.  
Accordingly, additional statements such as dealer advertising or presentation, whether oral or written,  
do not constitute warranties by SAMSUNG and should not be relied upon.  
Samsung Telecommunications America, L.P.  
1301 E. Lookout Drive  
Richardson, Texas 75082  
Phone: 1-800-SAMSUNG  
Phone: 1-888-987-HELP (4357)  
©2004 Samsung Telecommunications America. All rights reserved.  
No reproduction in whole or in part allowed without prior written approval.  
Specifications and availability subject to change without notice. [011604]  
Copyright © 2004 All rights reserved. No reproduction in whole or in part without prior written  
approval. All other trademarks are property of their respective owners.  
E
Index  
End Fax or Data Call 97  
A
Entering Text  
Alpha Mode 56  
Adjusting the Phone’s Volume  
Selecting a Character Input  
Mode 55  
Settings 21  
Airplane Mode 25  
Alarm Clock 66  
Answering Calls 13  
Symbols and Numbers 57  
T9 Text Input 56  
Erase Content 31  
Erase Pictures 31  
B
Backlight 20  
Banner - Changing 20  
Battery  
Capacity 10  
Charging 11  
Disposal 126  
Installing 10  
Removing 11  
I
Images 114  
Internal Phone Book  
Adding an Entry 57  
Dialing from 18  
Editing Entries 60  
Erasing 30  
Finding Entries 58  
Options 55  
C
Secret Entries 61  
Calculator 68  
Call Forwarding 95  
Call History  
L
Locking Your Phone 29  
Erasing 53  
Making a Call From 51  
Options 51  
M
Mail Kit  
Saving a Phone Number From  
General Options 102  
Message Setup Options 101  
New Message Options 103  
Making Calls 13  
Viewing 51  
Call Waiting 94  
Caller ID 94  
Manufacturer’s Warranty 130  
Menus  
Camera 82  
Taking Pictures 83  
Diagram 38  
D
Navigation 37  
Structure 37  
Data/Fax 96  
Viewing 38  
Data/Fax Setup 96  
Messaging 98  
End Fax or Data Call 97  
Receive a Fax 96  
Erasing All Text Messages 101  
Erasing Messages 101  
Missed Call Notification 14  
Send Fax or Data File 97  
Desktop Charger 12  
Dialing Options 15  
N
Digit Dial 72  
Name Dial 76  
Navigating Menus 37  
Note Pad 67  
Display Screen Symbols 6  
Display Settings 20  
Downloading Do More Content 112  
Index 133  
 
P
W
Phone Number  
Displaying 12  
Phone Numbers  
Finding 17  
Wall Paper - Changing 21  
Wireless Web  
Games 117  
Launching the Browser 109  
Messaging 99  
Saving 16  
With Pauses 17  
Phonebook 77  
Navigating 110  
R
Receiving a Fax 96  
Recording Memos 78  
Resetting Your Phone 31  
Ringer Types 22  
Ringer Types for Schedule 23  
Ringtones 112  
Roaming  
Analog Networks 33  
Other Digital Networks 33  
S
Scheduler 64  
Security Menu 29  
Send Fax or Data File 97  
set nam 34  
Silence Mode 25  
Special Numbers 30  
T
T9 Text Input 56  
Text Messaging 99  
Three-Way Calling 94  
Turning Your Phone On and Off 9  
U
Unlocking Your Phone 29  
Using One/Two/Three Touch  
Speed Dialing 14  
V
Voice Recognition 72  
Voicemail  
Clearing 93  
Notification 92  
Retrieving 93  
Setting Up 92  
134 Index  

Sony WALKMAN D EJ2000 User Manual
Sony SMP N100 User Manual
Seagate SAVVIO10K4 SAS ST9600104SS User Manual
Radio Shack 63 963 User Manual (1)
Radio Shack 12 1630 User Manual
Philips CD SOUNDMACHINE AZ1839 User Manual
Panasonic CQ DPX152 User Manual
Oregon RM368PU User Manual
Oki 70043502 User Manual
NokiaLumia710UnlockedBlack User Manual